ath9k_hw: Fix regression of register offset for AR9003 chips

My recent commits (3782c69d, 324c74a) introduced regression
for register offset selection that based on the macversion.
Not using parentheses in proper manner for ternary operator
leads to select wrong offset for the registers.

This issue was observed with AR9462 chip that immediate disconnect
after the association with the following message

ieee80211 phy3: wlan0: Failed to send nullfunc to AP 00:23:69:12:ea:47
after 500ms, disconnecting.

Cc: stable@kernel.org
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/ar9003_phy.h

@@ -572,14 +572,14 @@
 
 #define AR_PHY_TXGAIN_TABLE      (AR_SM_BASE + 0x300)
 
-#define AR_PHY_TX_IQCAL_CONTROL_0   (AR_SM_BASE + AR_SREV_9485(ah) ? \
-						 0x3c4 : 0x444)
-#define AR_PHY_TX_IQCAL_CONTROL_1   (AR_SM_BASE + AR_SREV_9485(ah) ? \
-						 0x3c8 : 0x448)
-#define AR_PHY_TX_IQCAL_START       (AR_SM_BASE + AR_SREV_9485(ah) ? \
-						 0x3c4 : 0x440)
-#define AR_PHY_TX_IQCAL_STATUS_B0   (AR_SM_BASE + AR_SREV_9485(ah) ? \
-						 0x3f0 : 0x48c)
+#define AR_PHY_TX_IQCAL_CONTROL_0   (AR_SM_BASE + (AR_SREV_9485(ah) ? \
+						 0x3c4 : 0x444))
+#define AR_PHY_TX_IQCAL_CONTROL_1   (AR_SM_BASE + (AR_SREV_9485(ah) ? \
+						 0x3c8 : 0x448))
+#define AR_PHY_TX_IQCAL_START       (AR_SM_BASE + (AR_SREV_9485(ah) ? \
+						 0x3c4 : 0x440))
+#define AR_PHY_TX_IQCAL_STATUS_B0   (AR_SM_BASE + (AR_SREV_9485(ah) ? \
+						 0x3f0 : 0x48c))
 #define AR_PHY_TX_IQCAL_CORR_COEFF_B0(_i)    (AR_SM_BASE + \
 					     (AR_SREV_9485(ah) ? \
 					      0x3d0 : 0x450) + ((_i) << 2))
@@ -931,10 +931,10 @@
 #define AR_PHY_AIC_SRAM_ADDR_B1	(AR_SM1_BASE + 0x5f0)
 #define AR_PHY_AIC_SRAM_DATA_B1	(AR_SM1_BASE + 0x5f4)
 
-#define AR_PHY_RTT_TABLE_SW_INTF_B(i)	(0x384 + (i) ? \
-					AR_SM1_BASE : AR_SM_BASE)
-#define AR_PHY_RTT_TABLE_SW_INTF_1_B(i)	(0x388 + (i) ? \
-					AR_SM1_BASE : AR_SM_BASE)
+#define AR_PHY_RTT_TABLE_SW_INTF_B(i)	(0x384 + ((i) ? \
+					AR_SM1_BASE : AR_SM_BASE))
+#define AR_PHY_RTT_TABLE_SW_INTF_1_B(i)	(0x388 + ((i) ? \
+					AR_SM1_BASE : AR_SM_BASE))
 /*
  * Channel 2 Register Map
  */