Staging: rt28x0: run *.h files through Lindent

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/rt2860/ap.h

@@ -41,40 +41,26 @@
 #define __AP_H__
 
 // ap_wpa.c
-VOID WpaStateMachineInit(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  STATE_MACHINE *Sm,
-    OUT STATE_MACHINE_FUNC Trans[]);
+VOID WpaStateMachineInit(IN PRTMP_ADAPTER pAd,
+			 IN STATE_MACHINE * Sm, OUT STATE_MACHINE_FUNC Trans[]);
 
 #ifdef RTMP_MAC_USB
-VOID BeaconUpdateExec(
-    IN PVOID SystemSpecific1,
-    IN PVOID FunctionContext,
-    IN PVOID SystemSpecific2,
-    IN PVOID SystemSpecific3);
+VOID BeaconUpdateExec(IN PVOID SystemSpecific1,
+		      IN PVOID FunctionContext,
+		      IN PVOID SystemSpecific2, IN PVOID SystemSpecific3);
 #endif // RTMP_MAC_USB //
 
-VOID RTMPSetPiggyBack(
-	IN PRTMP_ADAPTER	pAd,
-	IN BOOLEAN			bPiggyBack);
+VOID RTMPSetPiggyBack(IN PRTMP_ADAPTER pAd, IN BOOLEAN bPiggyBack);
 
-VOID MacTableReset(
-    IN  PRTMP_ADAPTER   pAd);
+VOID MacTableReset(IN PRTMP_ADAPTER pAd);
 
-MAC_TABLE_ENTRY *MacTableInsertEntry(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          pAddr,
-	IN	UCHAR			apidx,
-	IN BOOLEAN	CleanAll);
+MAC_TABLE_ENTRY *MacTableInsertEntry(IN PRTMP_ADAPTER pAd,
+				     IN PUCHAR pAddr,
+				     IN UCHAR apidx, IN BOOLEAN CleanAll);
 
-BOOLEAN MacTableDeleteEntry(
-    IN  PRTMP_ADAPTER   pAd,
-	IN USHORT wcid,
-    IN  PUCHAR          pAddr);
+BOOLEAN MacTableDeleteEntry(IN PRTMP_ADAPTER pAd,
+			    IN USHORT wcid, IN PUCHAR pAddr);
 
-MAC_TABLE_ENTRY *MacTableLookup(
-    IN  PRTMP_ADAPTER   pAd,
-    IN  PUCHAR          pAddr);
-
-#endif  // __AP_H__
+MAC_TABLE_ENTRY *MacTableLookup(IN PRTMP_ADAPTER pAd, IN PUCHAR pAddr);
 
+#endif // __AP_H__

drivers/staging/rt2860/chip/mac_pci.h

@@ -43,7 +43,6 @@
 #include "../rtmp_iface.h"
 #include "../rtmp_dot11.h"
 
-
 //
 // Device ID & Vendor ID related definitions,
 // NOTE: you should not add the new VendorID/DeviceID here unless you not sure it belongs to what chip.
@@ -61,10 +60,6 @@
 #define PCI_CLASS_BRIDGE_PCI		0x0604
 #endif
 
-
-
-
-
 #define TXINFO_SIZE						0
 #define RTMP_PKT_TAIL_PADDING			0
 #define fRTMP_ADAPTER_NEED_STOP_TX	0
@@ -72,86 +67,83 @@
 #define AUX_CTRL           0x10c
 
 //
-// TX descriptor format, Tx	ring, Mgmt Ring
+// TX descriptor format, Tx     ring, Mgmt Ring
 //
-typedef	struct	PACKED _TXD_STRUC {
-	// Word	0
-	UINT32		SDPtr0;
-	// Word	1
-	UINT32		SDLen1:14;
-	UINT32		LastSec1:1;
-	UINT32		Burst:1;
-	UINT32		SDLen0:14;
-	UINT32		LastSec0:1;
-	UINT32		DMADONE:1;
+typedef struct PACKED _TXD_STRUC {
+	// Word 0
+	UINT32 SDPtr0;
+	// Word 1
+	UINT32 SDLen1:14;
+	UINT32 LastSec1:1;
+	UINT32 Burst:1;
+	UINT32 SDLen0:14;
+	UINT32 LastSec0:1;
+	UINT32 DMADONE:1;
 	//Word2
-	UINT32		SDPtr1;
+	UINT32 SDPtr1;
 	//Word3
-	UINT32		rsv2:24;
-	UINT32		WIV:1;	// Wireless Info Valid. 1 if Driver already fill WI,  o if DMA needs to copy WI to correctposition
-	UINT32		QSEL:2;	// select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA
-	UINT32		rsv:2;
-	UINT32		TCO:1;	//
-	UINT32		UCO:1;	//
-	UINT32		ICO:1;	//
-}	TXD_STRUC, *PTXD_STRUC;
-
+	UINT32 rsv2:24;
+	UINT32 WIV:1;		// Wireless Info Valid. 1 if Driver already fill WI,  o if DMA needs to copy WI to correctposition
+	UINT32 QSEL:2;		// select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA
+	UINT32 rsv:2;
+	UINT32 TCO:1;		//
+	UINT32 UCO:1;		//
+	UINT32 ICO:1;		//
+} TXD_STRUC, *PTXD_STRUC;
 
 //
 // Rx descriptor format, Rx Ring
 //
-typedef	struct	PACKED _RXD_STRUC{
-	// Word	0
-	UINT32		SDP0;
-	// Word	1
-	UINT32		SDL1:14;
-	UINT32		Rsv:2;
-	UINT32		SDL0:14;
-	UINT32		LS0:1;
-	UINT32		DDONE:1;
-	// Word	2
-	UINT32		SDP1;
-	// Word	3
-	UINT32		BA:1;
-	UINT32		DATA:1;
-	UINT32		NULLDATA:1;
-	UINT32		FRAG:1;
-	UINT32		U2M:1;              // 1: this RX frame is unicast to me
-	UINT32		Mcast:1;            // 1: this is a multicast frame
-	UINT32		Bcast:1;            // 1: this is a broadcast frame
-	UINT32		MyBss:1;	// 1: this frame belongs to the same BSSID
-	UINT32		Crc:1;              // 1: CRC error
-	UINT32		CipherErr:2;        // 0: decryption okay, 1:ICV error, 2:MIC error, 3:KEY not valid
-	UINT32		AMSDU:1;		// rx with 802.3 header, not 802.11 header.
-	UINT32		HTC:1;
-	UINT32		RSSI:1;
-	UINT32		L2PAD:1;
-	UINT32		AMPDU:1;
-	UINT32		Decrypted:1;	// this frame is being decrypted.
-	UINT32		PlcpSignal:1;		// To be moved
-	UINT32		PlcpRssil:1;// To be moved
-	UINT32		Rsv1:13;
-}	RXD_STRUC, *PRXD_STRUC, RT28XX_RXD_STRUC, *PRT28XX_RXD_STRUC;
+typedef struct PACKED _RXD_STRUC {
+	// Word 0
+	UINT32 SDP0;
+	// Word 1
+	UINT32 SDL1:14;
+	UINT32 Rsv:2;
+	UINT32 SDL0:14;
+	UINT32 LS0:1;
+	UINT32 DDONE:1;
+	// Word 2
+	UINT32 SDP1;
+	// Word 3
+	UINT32 BA:1;
+	UINT32 DATA:1;
+	UINT32 NULLDATA:1;
+	UINT32 FRAG:1;
+	UINT32 U2M:1;		// 1: this RX frame is unicast to me
+	UINT32 Mcast:1;		// 1: this is a multicast frame
+	UINT32 Bcast:1;		// 1: this is a broadcast frame
+	UINT32 MyBss:1;		// 1: this frame belongs to the same BSSID
+	UINT32 Crc:1;		// 1: CRC error
+	UINT32 CipherErr:2;	// 0: decryption okay, 1:ICV error, 2:MIC error, 3:KEY not valid
+	UINT32 AMSDU:1;		// rx with 802.3 header, not 802.11 header.
+	UINT32 HTC:1;
+	UINT32 RSSI:1;
+	UINT32 L2PAD:1;
+	UINT32 AMPDU:1;
+	UINT32 Decrypted:1;	// this frame is being decrypted.
+	UINT32 PlcpSignal:1;	// To be moved
+	UINT32 PlcpRssil:1;	// To be moved
+	UINT32 Rsv1:13;
+} RXD_STRUC, *PRXD_STRUC, RT28XX_RXD_STRUC, *PRT28XX_RXD_STRUC;
 
 typedef union _TX_ATTENUATION_CTRL_STRUC {
-	struct
-	{
-		ULONG	RF_ISOLATION_ENABLE:1;
-		ULONG	Reserve2:7;
-		ULONG	PCIE_PHY_TX_ATTEN_VALUE:3;
-		ULONG	PCIE_PHY_TX_ATTEN_EN:1;
-		ULONG	Reserve1:20;
+	struct {
+		ULONG RF_ISOLATION_ENABLE:1;
+		ULONG Reserve2:7;
+		ULONG PCIE_PHY_TX_ATTEN_VALUE:3;
+		ULONG PCIE_PHY_TX_ATTEN_EN:1;
+		ULONG Reserve1:20;
 	} field;
 
-	ULONG	word;
+	ULONG word;
 } TX_ATTENUATION_CTRL_STRUC, *PTX_ATTENUATION_CTRL_STRUC;
 
 /* ----------------- EEPROM Related MACRO ----------------- */
 
 // 8051 firmware image for RT2860 - base address = 0x4000
 #define FIRMWARE_IMAGE_BASE     0x2000
-#define MAX_FIRMWARE_IMAGE_SIZE 0x2000    // 8kbyte
-
+#define MAX_FIRMWARE_IMAGE_SIZE 0x2000	// 8kbyte
 
 /* ----------------- Frimware Related MACRO ----------------- */
 #define RTMP_WRITE_FIRMWARE(_pAd, _pFwImage, _FwLen)			\
@@ -175,14 +167,12 @@ typedef union _TX_ATTENUATION_CTRL_STRUC {
 		RTMP_IO_WRITE32(_pAd, H2M_MAILBOX_CSR, 0);		\
 	}while(0)
 
-
 /* ----------------- TX Related MACRO ----------------- */
 #define RTMP_START_DEQUEUE(pAd, QueIdx, irqFlags)		do{}while(0)
 #define RTMP_STOP_DEQUEUE(pAd, QueIdx, irqFlags)		do{}while(0)
 
-
 #define RTMP_HAS_ENOUGH_FREE_DESC(pAd, pTxBlk, freeNum, pPacket) \
-		((freeNum) >= (ULONG)(pTxBlk->TotalFragNum + RTMP_GET_PACKET_FRAGMENTS(pPacket) + 3)) /* rough estimate we will use 3 more descriptor. */
+		((freeNum) >= (ULONG)(pTxBlk->TotalFragNum + RTMP_GET_PACKET_FRAGMENTS(pPacket) + 3))	/* rough estimate we will use 3 more descriptor. */
 #define RTMP_RELEASE_DESC_RESOURCE(pAd, QueIdx)	\
 		do{}while(0)
 
@@ -190,12 +180,11 @@ typedef union _TX_ATTENUATION_CTRL_STRUC {
 		(((freeNum != (TX_RING_SIZE-1)) && (pAd->TxSwQueue[QueIdx].Number == 0)) || (freeNum<3))
 		//(((freeNum) != (TX_RING_SIZE-1)) && (pAd->TxSwQueue[QueIdx].Number == 1 /*0*/))
 
-
 #define HAL_KickOutMgmtTx(_pAd, _QueIdx, _pPacket, _pSrcBufVA, _SrcBufLen)	\
 			RtmpPCIMgmtKickOut(_pAd, _QueIdx, _pPacket, _pSrcBufVA, _SrcBufLen)
 
 #define HAL_WriteSubTxResource(pAd, pTxBlk, bIsLast, pFreeNumber)	\
-		/* RtmpPCI_WriteSubTxResource(pAd, pTxBlk, bIsLast, pFreeNumber)*/
+				/* RtmpPCI_WriteSubTxResource(pAd, pTxBlk, bIsLast, pFreeNumber) */
 
 #define HAL_WriteTxResource(pAd, pTxBlk,bIsLast, pFreeNumber)	\
 			RtmpPCI_WriteSingleTxResource(pAd, pTxBlk, bIsLast, pFreeNumber)
@@ -210,7 +199,7 @@ typedef union _TX_ATTENUATION_CTRL_STRUC {
 			RtmpPCI_FinalWriteTxResource(_pAd, _pTxBlk, _TotalMPDUSize, _FirstTxIdx)
 
 #define HAL_LastTxIdx(_pAd, _QueIdx,_LastTxIdx) \
-			/*RtmpPCIDataLastTxIdx(_pAd, _QueIdx,_LastTxIdx)*/
+				/*RtmpPCIDataLastTxIdx(_pAd, _QueIdx,_LastTxIdx) */
 
 #define HAL_KickOutTx(_pAd, _pTxBlk, _QueIdx)	\
 			RTMP_IO_WRITE32((_pAd), TX_CTX_IDX0+((_QueIdx)*0x10), (_pAd)->TxRing[(_QueIdx)].TxCpuIdx)
@@ -225,17 +214,14 @@ typedef union _TX_ATTENUATION_CTRL_STRUC {
 			 :	\
 			(_pAd->TxRing[_QueIdx].TxSwFreeIdx + TX_RING_SIZE - _pAd->TxRing[_QueIdx].TxCpuIdx - 1);
 
-
 #define GET_MGMTRING_FREENO(_pAd) \
 	(_pAd->MgmtRing.TxSwFreeIdx > _pAd->MgmtRing.TxCpuIdx)	? \
 			(_pAd->MgmtRing.TxSwFreeIdx - _pAd->MgmtRing.TxCpuIdx - 1) \
 			 :	\
 			(_pAd->MgmtRing.TxSwFreeIdx + MGMT_RING_SIZE - _pAd->MgmtRing.TxCpuIdx - 1);
 
-
 /* ----------------- RX Related MACRO ----------------- */
 
-
 /* ----------------- ASIC Related MACRO ----------------- */
 // reset MAC of a station entry to 0x000000000000
 #define RTMP_STA_ENTRY_MAC_RESET(pAd, Wcid)	\
@@ -272,7 +258,6 @@ typedef union _TX_ATTENUATION_CTRL_STRUC {
 						  pAd->SharedKey[apidx][KeyID].CipherAlg,		\
 						  pEntry); }
 
-
 // Insert the BA bitmap to ASIC for the Wcid entry
 #define RTMP_ADD_BA_SESSION_TO_ASIC(_pAd, _Aid, _TID)	\
 		do{					\
@@ -283,9 +268,8 @@ typedef union _TX_ATTENUATION_CTRL_STRUC {
 			RTMP_IO_WRITE32((_pAd), _Offset, _Value);\
 		}while(0)
 
-
 // Remove the BA bitmap from ASIC for the Wcid entry
-//		bitmap field starts at 0x10000 in ASIC WCID table
+//              bitmap field starts at 0x10000 in ASIC WCID table
 #define RTMP_DEL_BA_SESSION_FROM_ASIC(_pAd, _Wcid, _TID)				\
 		do{								\
 			UINT32	_Value = 0, _Offset;				\
@@ -295,7 +279,6 @@ typedef union _TX_ATTENUATION_CTRL_STRUC {
 			RTMP_IO_WRITE32((_pAd), _Offset, _Value);			\
 		}while(0)
 
-
 /* ----------------- Interface Related MACRO ----------------- */
 
 //
@@ -314,7 +297,6 @@ typedef union _TX_ATTENUATION_CTRL_STRUC {
 		RTMP_SET_FLAG((_pAd), fRTMP_ADAPTER_INTERRUPT_ACTIVE);	\
 	}while(0)
 
-
 #define RTMP_IRQ_INIT(pAd)	\
 	{	pAd->int_enable_reg = ((DELAYINTMASK) |		\
 					(RxINT|TxDataInt|TxMgmtInt)) & ~(0x03);	\
@@ -326,7 +308,6 @@ typedef union _TX_ATTENUATION_CTRL_STRUC {
 		RTMP_IO_WRITE32(pAd, INT_SOURCE_CSR, 0xffffffff);\
 		RTMP_ASIC_INTERRUPT_ENABLE(pAd); }
 
-
 /* ----------------- MLME Related MACRO ----------------- */
 #define RTMP_MLME_HANDLER(pAd)			MlmeHandler(pAd)
 
@@ -344,7 +325,6 @@ typedef union _TX_ATTENUATION_CTRL_STRUC {
 /* ----------------- Power Save Related MACRO ----------------- */
 #define RTMP_PS_POLL_ENQUEUE(pAd)				EnqueuePsPoll(pAd)
 
-
 // For RTMPPCIePowerLinkCtrlRestore () function
 #define RESTORE_HALT		1
 #define RESTORE_WAKEUP		2
@@ -358,7 +338,6 @@ typedef union _TX_ATTENUATION_CTRL_STRUC {
 #define CID2MASK		0x00ff0000
 #define CID3MASK		0xff000000
 
-
 #define RTMP_STA_FORCE_WAKEUP(pAd, bFromTx) \
     RT28xxPciStaAsicForceWakeup(pAd, bFromTx);
 

drivers/staging/rt2860/chip/mac_usb.h

@@ -43,13 +43,12 @@
 #include "../rtmp_iface.h"
 #include "../rtmp_dot11.h"
 
-
 #define USB_CYC_CFG				0x02a4
 
 #define BEACON_RING_SIZE		2
 #define MGMTPIPEIDX				0	// EP6 is highest priority
 
-#define RTMP_PKT_TAIL_PADDING	11 // 3(max 4 byte padding) + 4 (last packet padding) + 4 (MaxBulkOutsize align padding)
+#define RTMP_PKT_TAIL_PADDING	11	// 3(max 4 byte padding) + 4 (last packet padding) + 4 (MaxBulkOutsize align padding)
 
 #define fRTMP_ADAPTER_NEED_STOP_TX		\
 		(fRTMP_ADAPTER_NIC_NOT_EXIST | fRTMP_ADAPTER_HALT_IN_PROGRESS |	\
@@ -62,157 +61,146 @@
 #define RXINFO_SIZE				4
 #define RT2870_RXDMALEN_FIELD_SIZE	4
 
-typedef	struct	PACKED _RXINFO_STRUC {
-	UINT32		BA:1;
-	UINT32		DATA:1;
-	UINT32		NULLDATA:1;
-	UINT32		FRAG:1;
-	UINT32		U2M:1;              // 1: this RX frame is unicast to me
-	UINT32		Mcast:1;            // 1: this is a multicast frame
-	UINT32		Bcast:1;            // 1: this is a broadcast frame
-	UINT32		MyBss:1;	// 1: this frame belongs to the same BSSID
-	UINT32		Crc:1;              // 1: CRC error
-	UINT32		CipherErr:2;        // 0: decryption okay, 1:ICV error, 2:MIC error, 3:KEY not valid
-	UINT32		AMSDU:1;		// rx with 802.3 header, not 802.11 header.
-	UINT32		HTC:1;
-	UINT32		RSSI:1;
-	UINT32		L2PAD:1;
-	UINT32		AMPDU:1;		// To be moved
-	UINT32		Decrypted:1;
-	UINT32		PlcpRssil:1;
-	UINT32		CipherAlg:1;
-	UINT32		LastAMSDU:1;
-	UINT32		PlcpSignal:12;
-}	RXINFO_STRUC, *PRXINFO_STRUC, RT28XX_RXD_STRUC, *PRT28XX_RXD_STRUC;
-
+typedef struct PACKED _RXINFO_STRUC {
+	UINT32 BA:1;
+	UINT32 DATA:1;
+	UINT32 NULLDATA:1;
+	UINT32 FRAG:1;
+	UINT32 U2M:1;		// 1: this RX frame is unicast to me
+	UINT32 Mcast:1;		// 1: this is a multicast frame
+	UINT32 Bcast:1;		// 1: this is a broadcast frame
+	UINT32 MyBss:1;		// 1: this frame belongs to the same BSSID
+	UINT32 Crc:1;		// 1: CRC error
+	UINT32 CipherErr:2;	// 0: decryption okay, 1:ICV error, 2:MIC error, 3:KEY not valid
+	UINT32 AMSDU:1;		// rx with 802.3 header, not 802.11 header.
+	UINT32 HTC:1;
+	UINT32 RSSI:1;
+	UINT32 L2PAD:1;
+	UINT32 AMPDU:1;		// To be moved
+	UINT32 Decrypted:1;
+	UINT32 PlcpRssil:1;
+	UINT32 CipherAlg:1;
+	UINT32 LastAMSDU:1;
+	UINT32 PlcpSignal:12;
+} RXINFO_STRUC, *PRXINFO_STRUC, RT28XX_RXD_STRUC, *PRT28XX_RXD_STRUC;
 
 //
 // TXINFO
 //
 #define TXINFO_SIZE				4
 
-typedef	struct	_TXINFO_STRUC {
-	// Word	0
-	UINT32		USBDMATxPktLen:16;	//used ONLY in USB bulk Aggregation,  Total byte counts of all sub-frame.
-	UINT32		rsv:8;
-	UINT32		WIV:1;	// Wireless Info Valid. 1 if Driver already fill WI,  o if DMA needs to copy WI to correctposition
-	UINT32		QSEL:2;	// select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA
-	UINT32		SwUseLastRound:1; // Software use.
-	UINT32		rsv2:2;  // Software use.
-	UINT32		USBDMANextVLD:1;	//used ONLY in USB bulk Aggregation, NextValid
-	UINT32		USBDMATxburst:1;//used ONLY in USB bulk Aggre. Force USB DMA transmit frame from current selected endpoint
-}	TXINFO_STRUC, *PTXINFO_STRUC;
-
+typedef struct _TXINFO_STRUC {
+	// Word 0
+	UINT32 USBDMATxPktLen:16;	//used ONLY in USB bulk Aggregation,  Total byte counts of all sub-frame.
+	UINT32 rsv:8;
+	UINT32 WIV:1;		// Wireless Info Valid. 1 if Driver already fill WI,  o if DMA needs to copy WI to correctposition
+	UINT32 QSEL:2;		// select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA
+	UINT32 SwUseLastRound:1;	// Software use.
+	UINT32 rsv2:2;		// Software use.
+	UINT32 USBDMANextVLD:1;	//used ONLY in USB bulk Aggregation, NextValid
+	UINT32 USBDMATxburst:1;	//used ONLY in USB bulk Aggre. Force USB DMA transmit frame from current selected endpoint
+} TXINFO_STRUC, *PTXINFO_STRUC;
 
 //
 // Management ring buffer format
 //
-typedef	struct	_MGMT_STRUC	{
-	BOOLEAN		Valid;
-	PUCHAR		pBuffer;
-	ULONG		Length;
-}	MGMT_STRUC, *PMGMT_STRUC;
-
+typedef struct _MGMT_STRUC {
+	BOOLEAN Valid;
+	PUCHAR pBuffer;
+	ULONG Length;
+} MGMT_STRUC, *PMGMT_STRUC;
 
 ////////////////////////////////////////////////////////////////////////////
 // The TX_BUFFER structure forms the transmitted USB packet to the device
 ////////////////////////////////////////////////////////////////////////////
-typedef struct __TX_BUFFER{
-	union{
-		UCHAR			WirelessPacket[TX_BUFFER_NORMSIZE];
-		HEADER_802_11	NullFrame;
-		PSPOLL_FRAME	PsPollPacket;
-		RTS_FRAME		RTSFrame;
-	}field;
-	UCHAR			Aggregation[4];  //Buffer for save Aggregation size.
+typedef struct __TX_BUFFER {
+	union {
+		UCHAR WirelessPacket[TX_BUFFER_NORMSIZE];
+		HEADER_802_11 NullFrame;
+		PSPOLL_FRAME PsPollPacket;
+		RTS_FRAME RTSFrame;
+	} field;
+	UCHAR Aggregation[4];	//Buffer for save Aggregation size.
 } TX_BUFFER, *PTX_BUFFER;
 
-typedef struct __HTTX_BUFFER{
-	union{
-		UCHAR			WirelessPacket[MAX_TXBULK_SIZE];
-		HEADER_802_11	NullFrame;
-		PSPOLL_FRAME	PsPollPacket;
-		RTS_FRAME		RTSFrame;
-	}field;
-	UCHAR			Aggregation[4];  //Buffer for save Aggregation size.
+typedef struct __HTTX_BUFFER {
+	union {
+		UCHAR WirelessPacket[MAX_TXBULK_SIZE];
+		HEADER_802_11 NullFrame;
+		PSPOLL_FRAME PsPollPacket;
+		RTS_FRAME RTSFrame;
+	} field;
+	UCHAR Aggregation[4];	//Buffer for save Aggregation size.
 } HTTX_BUFFER, *PHTTX_BUFFER;
 
-
 // used to track driver-generated write irps
-typedef struct _TX_CONTEXT
-{
-	PVOID			pAd;		//Initialized in MiniportInitialize
-	PURB			pUrb;			//Initialized in MiniportInitialize
-	PIRP			pIrp;			//used to cancel pending bulk out.
-									//Initialized in MiniportInitialize
-	PTX_BUFFER		TransferBuffer;	//Initialized in MiniportInitialize
-	ULONG			BulkOutSize;
-	UCHAR			BulkOutPipeId;
-	UCHAR			SelfIdx;
-	BOOLEAN			InUse;
-	BOOLEAN			bWaitingBulkOut; // at least one packet is in this TxContext, ready for making IRP anytime.
-	BOOLEAN			bFullForBulkOut; // all tx buffer are full , so waiting for tx bulkout.
-	BOOLEAN			IRPPending;
-	BOOLEAN			LastOne;
-	BOOLEAN			bAggregatible;
-	UCHAR			Header_802_3[LENGTH_802_3];
-	UCHAR			Rsv[2];
-	ULONG			DataOffset;
-	UINT			TxRate;
-	dma_addr_t		data_dma;		// urb dma on linux
-
-}	TX_CONTEXT, *PTX_CONTEXT, **PPTX_CONTEXT;
-
+typedef struct _TX_CONTEXT {
+	PVOID pAd;		//Initialized in MiniportInitialize
+	PURB pUrb;		//Initialized in MiniportInitialize
+	PIRP pIrp;		//used to cancel pending bulk out.
+	//Initialized in MiniportInitialize
+	PTX_BUFFER TransferBuffer;	//Initialized in MiniportInitialize
+	ULONG BulkOutSize;
+	UCHAR BulkOutPipeId;
+	UCHAR SelfIdx;
+	BOOLEAN InUse;
+	BOOLEAN bWaitingBulkOut;	// at least one packet is in this TxContext, ready for making IRP anytime.
+	BOOLEAN bFullForBulkOut;	// all tx buffer are full , so waiting for tx bulkout.
+	BOOLEAN IRPPending;
+	BOOLEAN LastOne;
+	BOOLEAN bAggregatible;
+	UCHAR Header_802_3[LENGTH_802_3];
+	UCHAR Rsv[2];
+	ULONG DataOffset;
+	UINT TxRate;
+	dma_addr_t data_dma;	// urb dma on linux
+
+} TX_CONTEXT, *PTX_CONTEXT, **PPTX_CONTEXT;
 
 // used to track driver-generated write irps
-typedef struct _HT_TX_CONTEXT
-{
-	PVOID			pAd;		//Initialized in MiniportInitialize
-	PURB			pUrb;			//Initialized in MiniportInitialize
-	PIRP			pIrp;			//used to cancel pending bulk out.
-									//Initialized in MiniportInitialize
-	PHTTX_BUFFER	TransferBuffer;	//Initialized in MiniportInitialize
-	ULONG			BulkOutSize;	// Indicate the total bulk-out size in bytes in one bulk-transmission
-	UCHAR			BulkOutPipeId;
-	BOOLEAN			IRPPending;
-	BOOLEAN			LastOne;
-	BOOLEAN			bCurWriting;
-	BOOLEAN			bRingEmpty;
-	BOOLEAN			bCopySavePad;
-	UCHAR			SavedPad[8];
-	UCHAR			Header_802_3[LENGTH_802_3];
-	ULONG			CurWritePosition;		// Indicate the buffer offset which packet will be inserted start from.
-	ULONG			CurWriteRealPos;		// Indicate the buffer offset which packet now are writing to.
-	ULONG			NextBulkOutPosition;	// Indicate the buffer start offset of a bulk-transmission
-	ULONG			ENextBulkOutPosition;	// Indicate the buffer end offset of a bulk-transmission
-	UINT			TxRate;
-	dma_addr_t		data_dma;		// urb dma on linux
-}	HT_TX_CONTEXT, *PHT_TX_CONTEXT, **PPHT_TX_CONTEXT;
-
+typedef struct _HT_TX_CONTEXT {
+	PVOID pAd;		//Initialized in MiniportInitialize
+	PURB pUrb;		//Initialized in MiniportInitialize
+	PIRP pIrp;		//used to cancel pending bulk out.
+	//Initialized in MiniportInitialize
+	PHTTX_BUFFER TransferBuffer;	//Initialized in MiniportInitialize
+	ULONG BulkOutSize;	// Indicate the total bulk-out size in bytes in one bulk-transmission
+	UCHAR BulkOutPipeId;
+	BOOLEAN IRPPending;
+	BOOLEAN LastOne;
+	BOOLEAN bCurWriting;
+	BOOLEAN bRingEmpty;
+	BOOLEAN bCopySavePad;
+	UCHAR SavedPad[8];
+	UCHAR Header_802_3[LENGTH_802_3];
+	ULONG CurWritePosition;	// Indicate the buffer offset which packet will be inserted start from.
+	ULONG CurWriteRealPos;	// Indicate the buffer offset which packet now are writing to.
+	ULONG NextBulkOutPosition;	// Indicate the buffer start offset of a bulk-transmission
+	ULONG ENextBulkOutPosition;	// Indicate the buffer end offset of a bulk-transmission
+	UINT TxRate;
+	dma_addr_t data_dma;	// urb dma on linux
+} HT_TX_CONTEXT, *PHT_TX_CONTEXT, **PPHT_TX_CONTEXT;
 
 //
 // Structure to keep track of receive packets and buffers to indicate
 // receive data to the protocol.
 //
-typedef struct _RX_CONTEXT
-{
-	PUCHAR				TransferBuffer;
-	PVOID				pAd;
-	PIRP				pIrp;//used to cancel pending bulk in.
-	PURB				pUrb;
+typedef struct _RX_CONTEXT {
+	PUCHAR TransferBuffer;
+	PVOID pAd;
+	PIRP pIrp;		//used to cancel pending bulk in.
+	PURB pUrb;
 	//These 2 Boolean shouldn't both be 1 at the same time.
-	ULONG				BulkInOffset;	// number of packets waiting for reordering .
-//	BOOLEAN				ReorderInUse;	// At least one packet in this buffer are in reordering buffer and wait for receive indication
-	BOOLEAN				bRxHandling;	// Notify this packet is being process now.
-	BOOLEAN				InUse;			// USB Hardware Occupied. Wait for USB HW to put packet.
-	BOOLEAN				Readable;		// Receive Complete back. OK for driver to indicate receiving packet.
-	BOOLEAN				IRPPending;		// TODO: To be removed
-	atomic_t			IrpLock;
-	NDIS_SPIN_LOCK		RxContextLock;
-	dma_addr_t			data_dma;		// urb dma on linux
-}	RX_CONTEXT, *PRX_CONTEXT;
-
-
+	ULONG BulkInOffset;	// number of packets waiting for reordering .
+//      BOOLEAN                         ReorderInUse;   // At least one packet in this buffer are in reordering buffer and wait for receive indication
+	BOOLEAN bRxHandling;	// Notify this packet is being process now.
+	BOOLEAN InUse;		// USB Hardware Occupied. Wait for USB HW to put packet.
+	BOOLEAN Readable;	// Receive Complete back. OK for driver to indicate receiving packet.
+	BOOLEAN IRPPending;	// TODO: To be removed
+	atomic_t IrpLock;
+	NDIS_SPIN_LOCK RxContextLock;
+	dma_addr_t data_dma;	// urb dma on linux
+} RX_CONTEXT, *PRX_CONTEXT;
 
 /******************************************************************************
 
@@ -221,13 +209,11 @@ typedef struct _RX_CONTEXT
 ******************************************************************************/
 // 8051 firmware image for usb - use last-half base address = 0x3000
 #define FIRMWARE_IMAGE_BASE			0x3000
-#define MAX_FIRMWARE_IMAGE_SIZE		0x1000    // 4kbyte
+#define MAX_FIRMWARE_IMAGE_SIZE		0x1000	// 4kbyte
 
 #define RTMP_WRITE_FIRMWARE(_pAd, _pFwImage, _FwLen)		\
 	RTUSBFirmwareWrite(_pAd, _pFwImage, _FwLen)
 
-
-
 /******************************************************************************
 
 	USB TX Related MACRO
@@ -281,7 +267,7 @@ typedef struct _RX_CONTEXT
 			RtmpUSB_FinalWriteTxResource(pAd, pTxBlk, totalMPDUSize, TxIdx)
 
 #define HAL_LastTxIdx(pAd, QueIdx,TxIdx) \
-			/*RtmpUSBDataLastTxIdx(pAd, QueIdx,TxIdx)*/
+				/*RtmpUSBDataLastTxIdx(pAd, QueIdx,TxIdx) */
 
 #define HAL_KickOutTx(pAd, pTxBlk, QueIdx)	\
 			RtmpUSBDataKickOut(pAd, pTxBlk, QueIdx)
@@ -292,20 +278,17 @@ typedef struct _RX_CONTEXT
 #define HAL_KickOutNullFrameTx(_pAd, _QueIdx, _pNullFrame, _frameLen)	\
 			RtmpUSBNullFrameKickOut(_pAd, _QueIdx, _pNullFrame, _frameLen)
 
-#define GET_TXRING_FREENO(_pAd, _QueIdx)	(_QueIdx) //(_pAd->TxRing[_QueIdx].TxSwFreeIdx)
+#define GET_TXRING_FREENO(_pAd, _QueIdx)	(_QueIdx)	//(_pAd->TxRing[_QueIdx].TxSwFreeIdx)
 #define GET_MGMTRING_FREENO(_pAd)			(_pAd->MgmtRing.TxSwFreeIdx)
 
-
 /* ----------------- RX Related MACRO ----------------- */
 
-
 /*
   *	Device Hardware Interface Related MACRO
   */
 #define RTMP_IRQ_INIT(pAd)				do{}while(0)
 #define RTMP_IRQ_ENABLE(pAd)			do{}while(0)
 
-
 /*
   *	MLME Related MACRO
   */
@@ -330,7 +313,6 @@ typedef struct _RX_CONTEXT
 		RTUSBMlmeUp(_pAd);									\
 	}
 
-
 /*
   *	Power Save Related MACRO
   */

drivers/staging/rt2860/chip/rt2860.h

@@ -43,14 +43,12 @@
 //
 #define NIC2860_PCI_DEVICE_ID	0x0601
 #define NIC2860_PCIe_DEVICE_ID	0x0681
-#define NIC2760_PCI_DEVICE_ID	0x0701		// 1T/2R Cardbus ???
-#define NIC2790_PCIe_DEVICE_ID  0x0781		// 1T/2R miniCard
-
+#define NIC2760_PCI_DEVICE_ID	0x0701	// 1T/2R Cardbus ???
+#define NIC2790_PCIe_DEVICE_ID  0x0781	// 1T/2R miniCard
 
 #define VEN_AWT_PCIe_DEVICE_ID	0x1059
 #define VEN_AWT_PCI_VENDOR_ID		0x1A3B
 
 #define EDIMAX_PCI_VENDOR_ID		0x1432
 
-
 #endif //__RT2860_H__ //

drivers/staging/rt2860/chip/rt2870.h

@@ -40,8 +40,7 @@
 #include "../rtmp_type.h"
 #include "mac_usb.h"
 
-
-//#define RTMP_CHIP_NAME		"RT2870"
+//#define RTMP_CHIP_NAME                "RT2870"
 
 #endif // RT2870 //
 #endif //__RT2870_H__ //

drivers/staging/rt2860/chip/rt3070.h

@@ -39,7 +39,6 @@
 
 #ifdef RT3070
 
-
 #ifndef RTMP_USB_SUPPORT
 #error "For RT3070, you should define the compile flag -DRTMP_USB_SUPPORT"
 #endif

drivers/staging/rt2860/chip/rt3090.h

@@ -63,9 +63,9 @@
 //
 // Device ID & Vendor ID, these values should match EEPROM value
 //
-#define NIC3090_PCIe_DEVICE_ID  0x3090		// 1T/1R miniCard
-#define NIC3091_PCIe_DEVICE_ID  0x3091		// 1T/2R miniCard
-#define NIC3092_PCIe_DEVICE_ID  0x3092		// 2T/2R miniCard
+#define NIC3090_PCIe_DEVICE_ID  0x3090	// 1T/1R miniCard
+#define NIC3091_PCIe_DEVICE_ID  0x3091	// 1T/2R miniCard
+#define NIC3092_PCIe_DEVICE_ID  0x3092	// 2T/2R miniCard
 
 #endif // RT3090 //
 

drivers/staging/rt2860/chip/rt30xx.h

@@ -39,7 +39,6 @@
 
 #ifdef RT30xx
 
-
 extern REG_PAIR RT30xx_RFRegTable[];
 extern UCHAR NUM_RF_REG_PARMS;
 

drivers/staging/rt2860/chip/rtmp_phy.h

@@ -38,7 +38,6 @@
 #ifndef __RTMP_PHY_H__
 #define __RTMP_PHY_H__
 
-
 /*
 	RF sections
 */
@@ -75,31 +74,30 @@
 #define RF_R30			30
 #define RF_R31			31
 
-
 // value domain of pAd->RfIcType
-#define RFIC_2820                   1       // 2.4G 2T3R
-#define RFIC_2850                   2       // 2.4G/5G 2T3R
-#define RFIC_2720                   3       // 2.4G 1T2R
-#define RFIC_2750                   4       // 2.4G/5G 1T2R
-#define RFIC_3020                   5       // 2.4G 1T1R
-#define RFIC_2020                   6       // 2.4G B/G
-#define RFIC_3021                   7       // 2.4G 1T2R
-#define RFIC_3022                   8       // 2.4G 2T2R
-#define RFIC_3052                   9       // 2.4G/5G 2T2R
+#define RFIC_2820                   1	// 2.4G 2T3R
+#define RFIC_2850                   2	// 2.4G/5G 2T3R
+#define RFIC_2720                   3	// 2.4G 1T2R
+#define RFIC_2750                   4	// 2.4G/5G 1T2R
+#define RFIC_3020                   5	// 2.4G 1T1R
+#define RFIC_2020                   6	// 2.4G B/G
+#define RFIC_3021                   7	// 2.4G 1T2R
+#define RFIC_3022                   8	// 2.4G 2T2R
+#define RFIC_3052                   9	// 2.4G/5G 2T2R
 
 /*
 	BBP sections
 */
-#define BBP_R0			0  // version
-#define BBP_R1			1  // TSSI
-#define BBP_R2			2  // TX configure
+#define BBP_R0			0	// version
+#define BBP_R1			1	// TSSI
+#define BBP_R2			2	// TX configure
 #define BBP_R3			3
 #define BBP_R4			4
 #define BBP_R5			5
 #define BBP_R6			6
-#define BBP_R14			14 // RX configure
+#define BBP_R14			14	// RX configure
 #define BBP_R16			16
-#define BBP_R17			17 // RX sensibility
+#define BBP_R17			17	// RX sensibility
 #define BBP_R18			18
 #define BBP_R21			21
 #define BBP_R22			22
@@ -108,12 +106,12 @@
 #define BBP_R26			26
 #define BBP_R27			27
 #define BBP_R31			31
-#define BBP_R49			49 //TSSI
+#define BBP_R49			49	//TSSI
 #define BBP_R50			50
 #define BBP_R51			51
 #define BBP_R52			52
 #define BBP_R55			55
-#define BBP_R62			62 // Rx SQ0 Threshold HIGH
+#define BBP_R62			62	// Rx SQ0 Threshold HIGH
 #define BBP_R63			63
 #define BBP_R64			64
 #define BBP_R65			65
@@ -121,7 +119,7 @@
 #define BBP_R67			67
 #define BBP_R68			68
 #define BBP_R69			69
-#define BBP_R70			70 // Rx AGC SQ CCK Xcorr threshold
+#define BBP_R70			70	// Rx AGC SQ CCK Xcorr threshold
 #define BBP_R73			73
 #define BBP_R75			75
 #define BBP_R77			77
@@ -135,7 +133,7 @@
 #define BBP_R86			86
 #define BBP_R91			91
 #define BBP_R92			92
-#define BBP_R94			94 // Tx Gain Control
+#define BBP_R94			94	// Tx Gain Control
 #define BBP_R103		103
 #define BBP_R105		105
 #define BBP_R106		106
@@ -151,16 +149,16 @@
 #define BBP_R122		122
 #define BBP_R123		123
 #ifdef RT30xx
-#define BBP_R138		138 // add by johnli, RF power sequence setup, ADC dynamic on/off control
+#define BBP_R138		138	// add by johnli, RF power sequence setup, ADC dynamic on/off control
 #endif // RT30xx //
 
-#define BBPR94_DEFAULT	0x06 // Add 1 value will gain 1db
+#define BBPR94_DEFAULT	0x06	// Add 1 value will gain 1db
 
 //
 // BBP & RF are using indirect access. Before write any value into it.
 // We have to make sure there is no outstanding command pending via checking busy bit.
 //
-#define MAX_BUSY_COUNT  100         // Number of retry before failing access BBP & RF indirect register
+#define MAX_BUSY_COUNT  100	// Number of retry before failing access BBP & RF indirect register
 
 //#define PHY_TR_SWITCH_TIME          5  // usec
 
@@ -416,7 +414,6 @@
 		}														\
 	}while(0)
 
-
 /*
 	This marco used for the BBP write operation which didn't need via MCU.
 */
@@ -539,7 +536,6 @@
 		RTMP_IO_WRITE32(_pAd, 0x1210, _macData);				\
 	}while(0)
 
-
 #define RTMP_ASIC_MMPS_ENABLE(_pAd)							\
 	do{															\
 		UINT32 _macData; \

drivers/staging/rt2860/chlist.h

@@ -41,7 +41,6 @@
 #include "rtmp_type.h"
 #include "rtmp_def.h"
 
-
 #define ODOR			0
 #define IDOR			1
 #define BOTH			2
@@ -53,28 +52,27 @@
 typedef struct _CH_DESP {
 	UCHAR FirstChannel;
 	UCHAR NumOfCh;
-	CHAR MaxTxPwr;			// dBm
-	UCHAR Geography;			// 0:out door, 1:in door, 2:both
-	BOOLEAN DfsReq;			// Dfs require, 0: No, 1: yes.
+	CHAR MaxTxPwr;		// dBm
+	UCHAR Geography;	// 0:out door, 1:in door, 2:both
+	BOOLEAN DfsReq;		// Dfs require, 0: No, 1: yes.
 } CH_DESP, *PCH_DESP;
 
 typedef struct _CH_REGION {
 	UCHAR CountReg[3];
-	UCHAR DfsType;			// 0: CE, 1: FCC, 2: JAP, 3:JAP_W53, JAP_W56
+	UCHAR DfsType;		// 0: CE, 1: FCC, 2: JAP, 3:JAP_W53, JAP_W56
 	CH_DESP ChDesp[10];
 } CH_REGION, *PCH_REGION;
 
 extern CH_REGION ChRegion[];
 
-typedef struct _CH_FREQ_MAP_{
-	UINT16		channel;
-	UINT16		freqKHz;
-}CH_FREQ_MAP;
+typedef struct _CH_FREQ_MAP_ {
+	UINT16 channel;
+	UINT16 freqKHz;
+} CH_FREQ_MAP;
 
 extern CH_FREQ_MAP CH_HZ_ID_MAP[];
 extern int CH_HZ_ID_MAP_NUM;
 
-
 #define     MAP_CHANNEL_ID_TO_KHZ(_ch, _khz)					\
 		do{													\
 			int _chIdx;											\
@@ -105,24 +103,15 @@ extern int CH_HZ_ID_MAP_NUM;
 				(_ch) = 1;											\
 		}while(0)
 
+VOID BuildChannelListEx(IN PRTMP_ADAPTER pAd);
 
-VOID BuildChannelListEx(
-	IN PRTMP_ADAPTER pAd);
+VOID BuildBeaconChList(IN PRTMP_ADAPTER pAd,
+		       OUT PUCHAR pBuf, OUT PULONG pBufLen);
 
-VOID BuildBeaconChList(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pBuf,
-	OUT	PULONG pBufLen);
+VOID N_ChannelCheck(IN PRTMP_ADAPTER pAd);
 
-VOID N_ChannelCheck(
-	IN PRTMP_ADAPTER pAd);
+VOID N_SetCenCh(IN PRTMP_ADAPTER pAd);
 
-VOID N_SetCenCh(
-	IN PRTMP_ADAPTER pAd);
-
-UINT8 GetCuntryMaxTxPwr(
-	IN PRTMP_ADAPTER pAd,
-	IN UINT8 channel);
+UINT8 GetCuntryMaxTxPwr(IN PRTMP_ADAPTER pAd, IN UINT8 channel);
 
 #endif // __CHLIST_H__
-

drivers/staging/rt2860/common/action.h

@@ -39,23 +39,18 @@
 #ifndef	__ACTION_H__
 #define	__ACTION_H__
 
-typedef struct PACKED __HT_INFO_OCTET
-{
-	UCHAR	Request:1;
-	UCHAR	Forty_MHz_Intolerant:1;
-	UCHAR 	STA_Channel_Width:1;
-	UCHAR	Reserved:5;
+typedef struct PACKED __HT_INFO_OCTET {
+	UCHAR Request:1;
+	UCHAR Forty_MHz_Intolerant:1;
+	UCHAR STA_Channel_Width:1;
+	UCHAR Reserved:5;
 } HT_INFORMATION_OCTET;
 
-
-typedef struct PACKED __FRAME_HT_INFO
-{
-	HEADER_802_11   		Hdr;
-	UCHAR					Category;
-	UCHAR					Action;
-	HT_INFORMATION_OCTET	HT_Info;
-}   FRAME_HT_INFO, *PFRAME_HT_INFO;
+typedef struct PACKED __FRAME_HT_INFO {
+	HEADER_802_11 Hdr;
+	UCHAR Category;
+	UCHAR Action;
+	HT_INFORMATION_OCTET HT_Info;
+} FRAME_HT_INFO, *PFRAME_HT_INFO;
 
 #endif /* __ACTION_H__ */
-
-

drivers/staging/rt2860/crypt_hmac.h

@@ -48,24 +48,18 @@
 
 #ifdef SHA1_SUPPORT
 #define HMAC_SHA1_SUPPORT
-VOID HMAC_SHA1 (
-    IN  const UINT8 Key[],
-    IN  UINT KeyLen,
-    IN  const UINT8 Message[],
-    IN  UINT MessageLen,
-    OUT UINT8 MAC[],
-    IN  UINT MACLen);
+VOID HMAC_SHA1(IN const UINT8 Key[],
+	       IN UINT KeyLen,
+	       IN const UINT8 Message[],
+	       IN UINT MessageLen, OUT UINT8 MAC[], IN UINT MACLen);
 #endif /* SHA1_SUPPORT */
 
 #ifdef MD5_SUPPORT
 #define HMAC_MD5_SUPPORT
-VOID HMAC_MD5 (
-    IN  const UINT8 Key[],
-    IN  UINT KeyLen,
-    IN  const UINT8 Message[],
-    IN  UINT MessageLen,
-    OUT UINT8 MAC[],
-    IN  UINT MACLen);
+VOID HMAC_MD5(IN const UINT8 Key[],
+	      IN UINT KeyLen,
+	      IN const UINT8 Message[],
+	      IN UINT MessageLen, OUT UINT8 MAC[], IN UINT MACLen);
 #endif /* MD5_SUPPORT */
 
 #endif /* __CRYPT_HMAC_H__ */

drivers/staging/rt2860/crypt_md5.h

@@ -51,30 +51,22 @@
 #define MD5_SUPPORT
 
 #ifdef MD5_SUPPORT
-#define MD5_BLOCK_SIZE    64 /* 512 bits = 64 bytes */
-#define MD5_DIGEST_SIZE   16 /* 128 bits = 16 bytes */
+#define MD5_BLOCK_SIZE    64	/* 512 bits = 64 bytes */
+#define MD5_DIGEST_SIZE   16	/* 128 bits = 16 bytes */
 typedef struct {
-    UINT32 HashValue[4];
-    UINT64 MessageLen;
-    UINT8  Block[MD5_BLOCK_SIZE];
-    UINT   BlockLen;
+	UINT32 HashValue[4];
+	UINT64 MessageLen;
+	UINT8 Block[MD5_BLOCK_SIZE];
+	UINT BlockLen;
 } MD5_CTX_STRUC, *PMD5_CTX_STRUC;
 
-VOID MD5_Init (
-    IN  MD5_CTX_STRUC *pMD5_CTX);
-VOID MD5_Hash (
-    IN  MD5_CTX_STRUC *pMD5_CTX);
-VOID MD5_Append (
-    IN  MD5_CTX_STRUC *pMD5_CTX,
-    IN  const UINT8 Message[],
-    IN  UINT MessageLen);
-VOID MD5_End (
-    IN  MD5_CTX_STRUC *pMD5_CTX,
-    OUT UINT8 DigestMessage[]);
-VOID RT_MD5 (
-    IN  const UINT8 Message[],
-    IN  UINT MessageLen,
-    OUT UINT8 DigestMessage[]);
+VOID MD5_Init(IN MD5_CTX_STRUC * pMD5_CTX);
+VOID MD5_Hash(IN MD5_CTX_STRUC * pMD5_CTX);
+VOID MD5_Append(IN MD5_CTX_STRUC * pMD5_CTX,
+		IN const UINT8 Message[], IN UINT MessageLen);
+VOID MD5_End(IN MD5_CTX_STRUC * pMD5_CTX, OUT UINT8 DigestMessage[]);
+VOID RT_MD5(IN const UINT8 Message[],
+	    IN UINT MessageLen, OUT UINT8 DigestMessage[]);
 #endif /* MD5_SUPPORT */
 
 #endif /* __CRYPT_MD5_H__ */

drivers/staging/rt2860/crypt_sha2.h

@@ -52,30 +52,22 @@
 #define SHA1_SUPPORT
 
 #ifdef SHA1_SUPPORT
-#define SHA1_BLOCK_SIZE    64 /* 512 bits = 64 bytes */
-#define SHA1_DIGEST_SIZE   20 /* 160 bits = 20 bytes */
+#define SHA1_BLOCK_SIZE    64	/* 512 bits = 64 bytes */
+#define SHA1_DIGEST_SIZE   20	/* 160 bits = 20 bytes */
 typedef struct _SHA1_CTX_STRUC {
-    UINT32 HashValue[5];  /* 5 = (SHA1_DIGEST_SIZE / 32) */
-    UINT64 MessageLen;    /* total size */
-    UINT8  Block[SHA1_BLOCK_SIZE];
-    UINT   BlockLen;
+	UINT32 HashValue[5];	/* 5 = (SHA1_DIGEST_SIZE / 32) */
+	UINT64 MessageLen;	/* total size */
+	UINT8 Block[SHA1_BLOCK_SIZE];
+	UINT BlockLen;
 } SHA1_CTX_STRUC, *PSHA1_CTX_STRUC;
 
-VOID RT_SHA1_Init (
-    IN  SHA1_CTX_STRUC *pSHA_CTX);
-VOID SHA1_Hash (
-    IN  SHA1_CTX_STRUC *pSHA_CTX);
-VOID SHA1_Append (
-    IN  SHA1_CTX_STRUC *pSHA_CTX,
-    IN  const UINT8 Message[],
-    IN  UINT MessageLen);
-VOID SHA1_End (
-    IN  SHA1_CTX_STRUC *pSHA_CTX,
-    OUT UINT8 DigestMessage[]);
-VOID RT_SHA1 (
-    IN  const UINT8 Message[],
-    IN  UINT MessageLen,
-    OUT UINT8 DigestMessage[]);
+VOID RT_SHA1_Init(IN SHA1_CTX_STRUC * pSHA_CTX);
+VOID SHA1_Hash(IN SHA1_CTX_STRUC * pSHA_CTX);
+VOID SHA1_Append(IN SHA1_CTX_STRUC * pSHA_CTX,
+		 IN const UINT8 Message[], IN UINT MessageLen);
+VOID SHA1_End(IN SHA1_CTX_STRUC * pSHA_CTX, OUT UINT8 DigestMessage[]);
+VOID RT_SHA1(IN const UINT8 Message[],
+	     IN UINT MessageLen, OUT UINT8 DigestMessage[]);
 #endif /* SHA1_SUPPORT */
 
 #endif /* __CRYPT_SHA2_H__ */

drivers/staging/rt2860/dfs.h

@@ -36,6 +36,4 @@
     Fonchi    03-12-2007      created
 */
 
-BOOLEAN RadarChannelCheck(
-	IN PRTMP_ADAPTER	pAd,
-	IN UCHAR			Ch);
+BOOLEAN RadarChannelCheck(IN PRTMP_ADAPTER pAd, IN UCHAR Ch);

drivers/staging/rt2860/eeprom.h

@@ -24,7 +24,6 @@
  *                                                                       *
  *************************************************************************
 
-
 	Module Name:
 	eeprom.h
 
@@ -38,41 +37,31 @@
 #ifndef __EEPROM_H__
 #define __EEPROM_H__
 
-
-
 #ifdef RTMP_PCI_SUPPORT
 /*************************************************************************
   *	Public function declarations for prom-based chipset
   ************************************************************************/
-int rtmp_ee_prom_read16(
-	IN PRTMP_ADAPTER	pAd,
-	IN USHORT			Offset,
-	OUT USHORT			*pValue);
+int rtmp_ee_prom_read16(IN PRTMP_ADAPTER pAd,
+			IN USHORT Offset, OUT USHORT * pValue);
 #endif // RTMP_PCI_SUPPORT //
 #ifdef RTMP_USB_SUPPORT
 /*************************************************************************
   *	Public function declarations for usb-based prom chipset
   ************************************************************************/
-NTSTATUS RTUSBReadEEPROM16(
-	IN PRTMP_ADAPTER	pAd,
-	IN	USHORT			offset,
-	OUT	PUSHORT			pData);
+NTSTATUS RTUSBReadEEPROM16(IN PRTMP_ADAPTER pAd,
+			   IN USHORT offset, OUT PUSHORT pData);
 #endif // RTMP_USB_SUPPORT //
 
 #ifdef RT30xx
 #ifdef RTMP_EFUSE_SUPPORT
-int rtmp_ee_efuse_read16(
-	IN RTMP_ADAPTER *pAd,
-	IN USHORT Offset,
-	OUT USHORT *pValue);
+int rtmp_ee_efuse_read16(IN RTMP_ADAPTER * pAd,
+			 IN USHORT Offset, OUT USHORT * pValue);
 #endif // RTMP_EFUSE_SUPPORT //
 #endif // RT30xx //
 
 /*************************************************************************
   *	Public function declarations for prom operation callback functions setting
   ************************************************************************/
-INT RtmpChipOpsEepromHook(
-	IN RTMP_ADAPTER *pAd,
-	IN INT			infType);
+INT RtmpChipOpsEepromHook(IN RTMP_ADAPTER * pAd, IN INT infType);
 
 #endif // __EEPROM_H__ //

drivers/staging/rt2860/iface/rtmp_pci.h

@@ -31,7 +31,6 @@
 #define RT28XX_HANDLE_DEV_ASSIGN(handle, dev_p)				\
 	((POS_COOKIE)handle)->pci_dev = dev_p;
 
-
 #ifdef LINUX
 // set driver data
 #define RT28XX_DRVDATA_SET(_a)			pci_set_drvdata(_a, net_dev);
@@ -64,7 +63,6 @@
 							pci_resource_len(dev_p, 0)); }	\
 	if (net_dev->irq) pci_release_regions(dev_p); }
 
-
 #define PCI_REG_READ_WORD(pci_dev, offset, Configuration)   \
     if (pci_read_config_word(pci_dev, offset, &reg16) == 0)     \
         Configuration = le2cpu16(reg16);                        \
@@ -77,5 +75,4 @@
 
 #endif // LINUX //
 
-
 #endif // __RTMP_PCI_H__ //

drivers/staging/rt2860/iface/rtmp_usb.h

@@ -28,28 +28,24 @@
 #ifndef __RTMP_USB_H__
 #define __RTMP_USB_H__
 
-
 #include "../rtusb_io.h"
 
-
 #ifdef LINUX
 #include <linux/usb.h>
 
-typedef struct usb_device	* PUSB_DEV;
+typedef struct usb_device *PUSB_DEV;
 typedef struct urb *purbb_t;
 typedef struct usb_ctrlrequest devctrlrequest;
 #endif // LINUX //
 
 extern UCHAR EpToQueue[6];
 
-
 #define RXBULKAGGRE_ZISE			12
 #define MAX_TXBULK_LIMIT			(LOCAL_TXBUF_SIZE*(BULKAGGRE_ZISE-1))
 #define MAX_TXBULK_SIZE			(LOCAL_TXBUF_SIZE*BULKAGGRE_ZISE)
 #define MAX_RXBULK_SIZE			(LOCAL_TXBUF_SIZE*RXBULKAGGRE_ZISE)
 #define MAX_MLME_HANDLER_MEMORY 20
 
-
 // Flags for Bulkflags control for bulk out data
 //
 #define	fRTUSB_BULK_OUT_DATA_NULL				0x00000001
@@ -69,7 +65,6 @@ extern UCHAR EpToQueue[6];
 
 // TODO:move to ./ate/include/iface/ate_usb.h
 
-
 #define FREE_HTTX_RING(_pCookie, _pipeId, _txContext)			\
 {										\
 	if ((_txContext)->ENextBulkOutPosition == (_txContext)->CurWritePosition)	\
@@ -79,8 +74,6 @@ extern UCHAR EpToQueue[6];
 	/*NdisInterlockedDecrement(&(_p)->TxCount); */\
 }
 
-
-
 /******************************************************************************
 
 	USB Bulk operation related definitions
@@ -100,7 +93,7 @@ extern UCHAR EpToQueue[6];
 // unlink urb
 #define RTUSB_UNLINK_URB(pUrb)		usb_kill_urb(pUrb)
 
-extern void dump_urb(struct urb* purb);
+extern void dump_urb(struct urb *purb);
 
 #define InterlockedIncrement		atomic_inc
 #define NdisInterlockedIncrement	atomic_inc
@@ -110,12 +103,8 @@ extern void dump_urb(struct urb* purb);
 
 #endif // LINUX //
 
-
-
 #define NT_SUCCESS(status)			(((status) >=0) ? (TRUE):(FALSE))
 
-
-
 #define USBD_TRANSFER_DIRECTION_OUT		0
 #define USBD_TRANSFER_DIRECTION_IN		0
 #define USBD_SHORT_TRANSFER_OK			0
@@ -131,7 +120,6 @@ extern void dump_urb(struct urb* purb);
 #define CONTROL_TIMEOUT_JIFFIES ( (100 * OS_HZ) / 1000)
 #define UNLINK_TIMEOUT_MS		3
 
-
 VOID RTUSBBulkOutDataPacketComplete(purbb_t purb, struct pt_regs *pt_regs);
 VOID RTUSBBulkOutMLMEPacketComplete(purbb_t pUrb, struct pt_regs *pt_regs);
 VOID RTUSBBulkOutNullFrameComplete(purbb_t pUrb, struct pt_regs *pt_regs);
@@ -139,7 +127,6 @@ VOID RTUSBBulkOutRTSFrameComplete(purbb_t pUrb, struct pt_regs *pt_regs);
 VOID RTUSBBulkOutPsPollComplete(purbb_t pUrb, struct pt_regs *pt_regs);
 VOID RTUSBBulkRxComplete(purbb_t pUrb, struct pt_regs *pt_regs);
 
-
 #ifdef KTHREAD_SUPPORT
 #define RTUSBMlmeUp(pAd) \
 	do{								    \
@@ -196,5 +183,4 @@ VOID RTUSBBulkRxComplete(purbb_t pUrb, struct pt_regs *pt_regs);
 #define RTMP_IRQ_REQUEST(net_dev)		do{}while(0)
 #define RTMP_IRQ_RELEASE(net_dev)		do{}while(0)
 
-
 #endif // __RTMP_USB_H__ //

drivers/staging/rt2860/oid.h

@@ -48,12 +48,12 @@
 //
 // IEEE 802.11 Structures and definitions
 //
-#define MAX_TX_POWER_LEVEL              100   /* mW */
-#define MAX_RSSI_TRIGGER                -10    /* dBm */
-#define MIN_RSSI_TRIGGER                -200   /* dBm */
-#define MAX_FRAG_THRESHOLD              2346  /* byte count */
-#define MIN_FRAG_THRESHOLD              256   /* byte count */
-#define MAX_RTS_THRESHOLD               2347  /* byte count */
+#define MAX_TX_POWER_LEVEL              100	/* mW */
+#define MAX_RSSI_TRIGGER                -10	/* dBm */
+#define MIN_RSSI_TRIGGER                -200	/* dBm */
+#define MAX_FRAG_THRESHOLD              2346	/* byte count */
+#define MIN_FRAG_THRESHOLD              256	/* byte count */
+#define MAX_RTS_THRESHOLD               2347	/* byte count */
 
 // new types for Media Specific Indications
 // Extension channel offset
@@ -78,15 +78,14 @@
 #define NDIS_802_11_LENGTH_RATES        8
 #define NDIS_802_11_LENGTH_RATES_EX     16
 #define MAC_ADDR_LENGTH                 6
-//#define MAX_NUM_OF_CHS					49 // 14 channels @2.4G +  12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL terminationc
-#define MAX_NUM_OF_CHS				54      // 14 channels @2.4G +  12@UNII(lower/middle) + 16@HiperLAN2 + 11@UNII(upper) + 0 @Japan + 1 as NULL termination
-#define MAX_NUMBER_OF_EVENT				10  // entry # in EVENT table
-#define MAX_NUMBER_OF_MAC				32 // if MAX_MBSSID_NUM is 8, this value can't be larger than 211
+//#define MAX_NUM_OF_CHS                                        49 // 14 channels @2.4G +  12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL terminationc
+#define MAX_NUM_OF_CHS				54	// 14 channels @2.4G +  12@UNII(lower/middle) + 16@HiperLAN2 + 11@UNII(upper) + 0 @Japan + 1 as NULL termination
+#define MAX_NUMBER_OF_EVENT				10	// entry # in EVENT table
+#define MAX_NUMBER_OF_MAC				32	// if MAX_MBSSID_NUM is 8, this value can't be larger than 211
 #define MAX_NUMBER_OF_ACL				64
-#define MAX_LENGTH_OF_SUPPORT_RATES		12    // 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
+#define MAX_LENGTH_OF_SUPPORT_RATES		12	// 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
 #define MAX_NUMBER_OF_DLS_ENTRY			4
 
-
 #define RT_QUERY_SIGNAL_CONTEXT				0x0402
 #define RT_SET_IAPP_PID                 	0x0404
 #define RT_SET_APD_PID						0x0405
@@ -129,19 +128,17 @@
 #define RT_OID_DRIVER_DEVICE_NAME                   0x0645
 #define RT_OID_QUERY_MULTIPLE_CARD_SUPPORT          0x0647
 
-typedef enum _NDIS_802_11_STATUS_TYPE
-{
-    Ndis802_11StatusType_Authentication,
-    Ndis802_11StatusType_MediaStreamMode,
-    Ndis802_11StatusType_PMKID_CandidateList,
-    Ndis802_11StatusTypeMax    // not a real type, defined as an upper bound
+typedef enum _NDIS_802_11_STATUS_TYPE {
+	Ndis802_11StatusType_Authentication,
+	Ndis802_11StatusType_MediaStreamMode,
+	Ndis802_11StatusType_PMKID_CandidateList,
+	Ndis802_11StatusTypeMax	// not a real type, defined as an upper bound
 } NDIS_802_11_STATUS_TYPE, *PNDIS_802_11_STATUS_TYPE;
 
-typedef UCHAR   NDIS_802_11_MAC_ADDRESS[6];
+typedef UCHAR NDIS_802_11_MAC_ADDRESS[6];
 
-typedef struct _NDIS_802_11_STATUS_INDICATION
-{
-    NDIS_802_11_STATUS_TYPE StatusType;
+typedef struct _NDIS_802_11_STATUS_INDICATION {
+	NDIS_802_11_STATUS_TYPE StatusType;
 } NDIS_802_11_STATUS_INDICATION, *PNDIS_802_11_STATUS_INDICATION;
 
 // mask for authentication/integrity fields
@@ -152,313 +149,283 @@ typedef struct _NDIS_802_11_STATUS_INDICATION
 #define NDIS_802_11_AUTH_REQUEST_PAIRWISE_ERROR     0x06
 #define NDIS_802_11_AUTH_REQUEST_GROUP_ERROR        0x0E
 
-typedef struct _NDIS_802_11_AUTHENTICATION_REQUEST
-{
-    ULONG Length;            // Length of structure
-    NDIS_802_11_MAC_ADDRESS Bssid;
-    ULONG Flags;
+typedef struct _NDIS_802_11_AUTHENTICATION_REQUEST {
+	ULONG Length;		// Length of structure
+	NDIS_802_11_MAC_ADDRESS Bssid;
+	ULONG Flags;
 } NDIS_802_11_AUTHENTICATION_REQUEST, *PNDIS_802_11_AUTHENTICATION_REQUEST;
 
 //Added new types for PMKID Candidate lists.
 typedef struct _PMKID_CANDIDATE {
-    NDIS_802_11_MAC_ADDRESS BSSID;
-    ULONG Flags;
+	NDIS_802_11_MAC_ADDRESS BSSID;
+	ULONG Flags;
 } PMKID_CANDIDATE, *PPMKID_CANDIDATE;
 
-typedef struct _NDIS_802_11_PMKID_CANDIDATE_LIST
-{
-    ULONG Version;       // Version of the structure
-    ULONG NumCandidates; // No. of pmkid candidates
-    PMKID_CANDIDATE CandidateList[1];
+typedef struct _NDIS_802_11_PMKID_CANDIDATE_LIST {
+	ULONG Version;		// Version of the structure
+	ULONG NumCandidates;	// No. of pmkid candidates
+	PMKID_CANDIDATE CandidateList[1];
 } NDIS_802_11_PMKID_CANDIDATE_LIST, *PNDIS_802_11_PMKID_CANDIDATE_LIST;
 
 //Flags for PMKID Candidate list structure
 #define NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED	0x01
 
 // Added new types for OFDM 5G and 2.4G
-typedef enum _NDIS_802_11_NETWORK_TYPE
-{
-   Ndis802_11FH,
-   Ndis802_11DS,
-    Ndis802_11OFDM5,
-    Ndis802_11OFDM24,
-   Ndis802_11Automode,
-    Ndis802_11OFDM5_N,
-    Ndis802_11OFDM24_N,
-    Ndis802_11NetworkTypeMax    // not a real type, defined as an upper bound
+typedef enum _NDIS_802_11_NETWORK_TYPE {
+	Ndis802_11FH,
+	Ndis802_11DS,
+	Ndis802_11OFDM5,
+	Ndis802_11OFDM24,
+	Ndis802_11Automode,
+	Ndis802_11OFDM5_N,
+	Ndis802_11OFDM24_N,
+	Ndis802_11NetworkTypeMax	// not a real type, defined as an upper bound
 } NDIS_802_11_NETWORK_TYPE, *PNDIS_802_11_NETWORK_TYPE;
 
-typedef struct _NDIS_802_11_NETWORK_TYPE_LIST
-{
-    UINT                       NumberOfItems;  // in list below, at least 1
-   NDIS_802_11_NETWORK_TYPE    NetworkType [1];
+typedef struct _NDIS_802_11_NETWORK_TYPE_LIST {
+	UINT NumberOfItems;	// in list below, at least 1
+	NDIS_802_11_NETWORK_TYPE NetworkType[1];
 } NDIS_802_11_NETWORK_TYPE_LIST, *PNDIS_802_11_NETWORK_TYPE_LIST;
 
-typedef enum _NDIS_802_11_POWER_MODE
-{
-    Ndis802_11PowerModeCAM,
-    Ndis802_11PowerModeMAX_PSP,
-    Ndis802_11PowerModeFast_PSP,
-    Ndis802_11PowerModeLegacy_PSP,
-    Ndis802_11PowerModeMax      // not a real mode, defined as an upper bound
+typedef enum _NDIS_802_11_POWER_MODE {
+	Ndis802_11PowerModeCAM,
+	Ndis802_11PowerModeMAX_PSP,
+	Ndis802_11PowerModeFast_PSP,
+	Ndis802_11PowerModeLegacy_PSP,
+	Ndis802_11PowerModeMax	// not a real mode, defined as an upper bound
 } NDIS_802_11_POWER_MODE, *PNDIS_802_11_POWER_MODE;
 
-typedef ULONG   NDIS_802_11_TX_POWER_LEVEL; // in milliwatts
+typedef ULONG NDIS_802_11_TX_POWER_LEVEL;	// in milliwatts
 
 //
 // Received Signal Strength Indication
 //
-typedef LONG    NDIS_802_11_RSSI;           // in dBm
-
-typedef struct _NDIS_802_11_CONFIGURATION_FH
-{
-   ULONG           Length;            // Length of structure
-   ULONG           HopPattern;        // As defined by 802.11, MSB set
-   ULONG           HopSet;            // to one if non-802.11
-   ULONG           DwellTime;         // units are Kusec
+typedef LONG NDIS_802_11_RSSI;	// in dBm
+
+typedef struct _NDIS_802_11_CONFIGURATION_FH {
+	ULONG Length;		// Length of structure
+	ULONG HopPattern;	// As defined by 802.11, MSB set
+	ULONG HopSet;		// to one if non-802.11
+	ULONG DwellTime;	// units are Kusec
 } NDIS_802_11_CONFIGURATION_FH, *PNDIS_802_11_CONFIGURATION_FH;
 
-typedef struct _NDIS_802_11_CONFIGURATION
-{
-   ULONG                           Length;             // Length of structure
-   ULONG                           BeaconPeriod;       // units are Kusec
-   ULONG                           ATIMWindow;         // units are Kusec
-   ULONG                           DSConfig;           // Frequency, units are kHz
-   NDIS_802_11_CONFIGURATION_FH    FHConfig;
+typedef struct _NDIS_802_11_CONFIGURATION {
+	ULONG Length;		// Length of structure
+	ULONG BeaconPeriod;	// units are Kusec
+	ULONG ATIMWindow;	// units are Kusec
+	ULONG DSConfig;		// Frequency, units are kHz
+	NDIS_802_11_CONFIGURATION_FH FHConfig;
 } NDIS_802_11_CONFIGURATION, *PNDIS_802_11_CONFIGURATION;
 
-typedef struct _NDIS_802_11_STATISTICS
-{
-   ULONG           Length;             // Length of structure
-   LARGE_INTEGER   TransmittedFragmentCount;
-   LARGE_INTEGER   MulticastTransmittedFrameCount;
-   LARGE_INTEGER   FailedCount;
-   LARGE_INTEGER   RetryCount;
-   LARGE_INTEGER   MultipleRetryCount;
-   LARGE_INTEGER   RTSSuccessCount;
-   LARGE_INTEGER   RTSFailureCount;
-   LARGE_INTEGER   ACKFailureCount;
-   LARGE_INTEGER   FrameDuplicateCount;
-   LARGE_INTEGER   ReceivedFragmentCount;
-   LARGE_INTEGER   MulticastReceivedFrameCount;
-   LARGE_INTEGER   FCSErrorCount;
-   LARGE_INTEGER   TKIPLocalMICFailures;
-   LARGE_INTEGER   TKIPRemoteMICErrors;
-   LARGE_INTEGER   TKIPICVErrors;
-   LARGE_INTEGER   TKIPCounterMeasuresInvoked;
-   LARGE_INTEGER   TKIPReplays;
-   LARGE_INTEGER   CCMPFormatErrors;
-   LARGE_INTEGER   CCMPReplays;
-   LARGE_INTEGER   CCMPDecryptErrors;
-   LARGE_INTEGER   FourWayHandshakeFailures;
+typedef struct _NDIS_802_11_STATISTICS {
+	ULONG Length;		// Length of structure
+	LARGE_INTEGER TransmittedFragmentCount;
+	LARGE_INTEGER MulticastTransmittedFrameCount;
+	LARGE_INTEGER FailedCount;
+	LARGE_INTEGER RetryCount;
+	LARGE_INTEGER MultipleRetryCount;
+	LARGE_INTEGER RTSSuccessCount;
+	LARGE_INTEGER RTSFailureCount;
+	LARGE_INTEGER ACKFailureCount;
+	LARGE_INTEGER FrameDuplicateCount;
+	LARGE_INTEGER ReceivedFragmentCount;
+	LARGE_INTEGER MulticastReceivedFrameCount;
+	LARGE_INTEGER FCSErrorCount;
+	LARGE_INTEGER TKIPLocalMICFailures;
+	LARGE_INTEGER TKIPRemoteMICErrors;
+	LARGE_INTEGER TKIPICVErrors;
+	LARGE_INTEGER TKIPCounterMeasuresInvoked;
+	LARGE_INTEGER TKIPReplays;
+	LARGE_INTEGER CCMPFormatErrors;
+	LARGE_INTEGER CCMPReplays;
+	LARGE_INTEGER CCMPDecryptErrors;
+	LARGE_INTEGER FourWayHandshakeFailures;
 } NDIS_802_11_STATISTICS, *PNDIS_802_11_STATISTICS;
 
-typedef  ULONG  NDIS_802_11_KEY_INDEX;
-typedef ULONGLONG   NDIS_802_11_KEY_RSC;
+typedef ULONG NDIS_802_11_KEY_INDEX;
+typedef ULONGLONG NDIS_802_11_KEY_RSC;
 
-#define MAX_RADIUS_SRV_NUM			2	  // 802.1x failover number
+#define MAX_RADIUS_SRV_NUM			2	// 802.1x failover number
 
 typedef struct PACKED _RADIUS_SRV_INFO {
-	UINT32			radius_ip;
-	UINT32			radius_port;
-	UCHAR			radius_key[64];
-	UCHAR			radius_key_len;
+	UINT32 radius_ip;
+	UINT32 radius_port;
+	UCHAR radius_key[64];
+	UCHAR radius_key_len;
 } RADIUS_SRV_INFO, *PRADIUS_SRV_INFO;
 
-typedef struct PACKED _RADIUS_KEY_INFO
-{
-	UCHAR			radius_srv_num;
-	RADIUS_SRV_INFO	radius_srv_info[MAX_RADIUS_SRV_NUM];
-	UCHAR			ieee8021xWEP;		 // dynamic WEP
-    UCHAR           key_index;
-    UCHAR           key_length;          // length of key in bytes
-    UCHAR           key_material[13];
+typedef struct PACKED _RADIUS_KEY_INFO {
+	UCHAR radius_srv_num;
+	RADIUS_SRV_INFO radius_srv_info[MAX_RADIUS_SRV_NUM];
+	UCHAR ieee8021xWEP;	// dynamic WEP
+	UCHAR key_index;
+	UCHAR key_length;	// length of key in bytes
+	UCHAR key_material[13];
 } RADIUS_KEY_INFO, *PRADIUS_KEY_INFO;
 
 // It's used by 802.1x daemon to require relative configuration
-typedef struct PACKED _RADIUS_CONF
-{
-    UINT32          Length;             // Length of this structure
-    UCHAR			mbss_num;			// indicate multiple BSS number
-	UINT32			own_ip_addr;
-	UINT32			retry_interval;
-	UINT32			session_timeout_interval;
-	UCHAR			EAPifname[8][IFNAMSIZ];
-	UCHAR			EAPifname_len[8];
-	UCHAR			PreAuthifname[8][IFNAMSIZ];
-	UCHAR			PreAuthifname_len[8];
-	RADIUS_KEY_INFO	RadiusInfo[8];
+typedef struct PACKED _RADIUS_CONF {
+	UINT32 Length;		// Length of this structure
+	UCHAR mbss_num;		// indicate multiple BSS number
+	UINT32 own_ip_addr;
+	UINT32 retry_interval;
+	UINT32 session_timeout_interval;
+	UCHAR EAPifname[8][IFNAMSIZ];
+	UCHAR EAPifname_len[8];
+	UCHAR PreAuthifname[8][IFNAMSIZ];
+	UCHAR PreAuthifname_len[8];
+	RADIUS_KEY_INFO RadiusInfo[8];
 } RADIUS_CONF, *PRADIUS_CONF;
 
-
-
 // Key mapping keys require a BSSID
-typedef struct _NDIS_802_11_KEY
-{
-    UINT           Length;             // Length of this structure
-    UINT           KeyIndex;
-    UINT           KeyLength;          // length of key in bytes
-    NDIS_802_11_MAC_ADDRESS BSSID;
-    NDIS_802_11_KEY_RSC KeyRSC;
-    UCHAR           KeyMaterial[1];     // variable length depending on above field
+typedef struct _NDIS_802_11_KEY {
+	UINT Length;		// Length of this structure
+	UINT KeyIndex;
+	UINT KeyLength;		// length of key in bytes
+	NDIS_802_11_MAC_ADDRESS BSSID;
+	NDIS_802_11_KEY_RSC KeyRSC;
+	UCHAR KeyMaterial[1];	// variable length depending on above field
 } NDIS_802_11_KEY, *PNDIS_802_11_KEY;
 
-typedef struct _NDIS_802_11_PASSPHRASE
-{
-    UINT           KeyLength;          // length of key in bytes
-    NDIS_802_11_MAC_ADDRESS BSSID;
-    UCHAR           KeyMaterial[1];     // variable length depending on above field
+typedef struct _NDIS_802_11_PASSPHRASE {
+	UINT KeyLength;		// length of key in bytes
+	NDIS_802_11_MAC_ADDRESS BSSID;
+	UCHAR KeyMaterial[1];	// variable length depending on above field
 } NDIS_802_11_PASSPHRASE, *PNDIS_802_11_PASSPHRASE;
 
-typedef struct _NDIS_802_11_REMOVE_KEY
-{
-    UINT           Length;             // Length of this structure
-    UINT           KeyIndex;
-    NDIS_802_11_MAC_ADDRESS BSSID;
+typedef struct _NDIS_802_11_REMOVE_KEY {
+	UINT Length;		// Length of this structure
+	UINT KeyIndex;
+	NDIS_802_11_MAC_ADDRESS BSSID;
 } NDIS_802_11_REMOVE_KEY, *PNDIS_802_11_REMOVE_KEY;
 
-typedef struct _NDIS_802_11_WEP
-{
-   UINT     Length;        // Length of this structure
-   UINT     KeyIndex;           // 0 is the per-client key, 1-N are the
-                                        // global keys
-   UINT     KeyLength;     // length of key in bytes
-   UCHAR     KeyMaterial[1];// variable length depending on above field
+typedef struct _NDIS_802_11_WEP {
+	UINT Length;		// Length of this structure
+	UINT KeyIndex;		// 0 is the per-client key, 1-N are the
+	// global keys
+	UINT KeyLength;		// length of key in bytes
+	UCHAR KeyMaterial[1];	// variable length depending on above field
 } NDIS_802_11_WEP, *PNDIS_802_11_WEP;
 
-
-typedef enum _NDIS_802_11_NETWORK_INFRASTRUCTURE
-{
-   Ndis802_11IBSS,
-   Ndis802_11Infrastructure,
-   Ndis802_11AutoUnknown,
-   Ndis802_11Monitor,
-   Ndis802_11InfrastructureMax     // Not a real value, defined as upper bound
+typedef enum _NDIS_802_11_NETWORK_INFRASTRUCTURE {
+	Ndis802_11IBSS,
+	Ndis802_11Infrastructure,
+	Ndis802_11AutoUnknown,
+	Ndis802_11Monitor,
+	Ndis802_11InfrastructureMax	// Not a real value, defined as upper bound
 } NDIS_802_11_NETWORK_INFRASTRUCTURE, *PNDIS_802_11_NETWORK_INFRASTRUCTURE;
 
 // Add new authentication modes
-typedef enum _NDIS_802_11_AUTHENTICATION_MODE
-{
-   Ndis802_11AuthModeOpen,
-   Ndis802_11AuthModeShared,
-   Ndis802_11AuthModeAutoSwitch,
-    Ndis802_11AuthModeWPA,
-    Ndis802_11AuthModeWPAPSK,
-    Ndis802_11AuthModeWPANone,
-   Ndis802_11AuthModeWPA2,
-   Ndis802_11AuthModeWPA2PSK,
-   	Ndis802_11AuthModeWPA1WPA2,
+typedef enum _NDIS_802_11_AUTHENTICATION_MODE {
+	Ndis802_11AuthModeOpen,
+	Ndis802_11AuthModeShared,
+	Ndis802_11AuthModeAutoSwitch,
+	Ndis802_11AuthModeWPA,
+	Ndis802_11AuthModeWPAPSK,
+	Ndis802_11AuthModeWPANone,
+	Ndis802_11AuthModeWPA2,
+	Ndis802_11AuthModeWPA2PSK,
+	Ndis802_11AuthModeWPA1WPA2,
 	Ndis802_11AuthModeWPA1PSKWPA2PSK,
-   Ndis802_11AuthModeMax           // Not a real mode, defined as upper bound
+	Ndis802_11AuthModeMax	// Not a real mode, defined as upper bound
 } NDIS_802_11_AUTHENTICATION_MODE, *PNDIS_802_11_AUTHENTICATION_MODE;
 
-typedef UCHAR   NDIS_802_11_RATES[NDIS_802_11_LENGTH_RATES];        // Set of 8 data rates
-typedef UCHAR   NDIS_802_11_RATES_EX[NDIS_802_11_LENGTH_RATES_EX];  // Set of 16 data rates
+typedef UCHAR NDIS_802_11_RATES[NDIS_802_11_LENGTH_RATES];	// Set of 8 data rates
+typedef UCHAR NDIS_802_11_RATES_EX[NDIS_802_11_LENGTH_RATES_EX];	// Set of 16 data rates
 
-typedef struct PACKED _NDIS_802_11_SSID
-{
-    UINT   SsidLength;         // length of SSID field below, in bytes;
-                                // this can be zero.
-    UCHAR   Ssid[NDIS_802_11_LENGTH_SSID];           // SSID information field
+typedef struct PACKED _NDIS_802_11_SSID {
+	UINT SsidLength;	// length of SSID field below, in bytes;
+	// this can be zero.
+	UCHAR Ssid[NDIS_802_11_LENGTH_SSID];	// SSID information field
 } NDIS_802_11_SSID, *PNDIS_802_11_SSID;
 
-
-typedef struct PACKED _NDIS_WLAN_BSSID
-{
-   ULONG                               Length;     // Length of this structure
-   NDIS_802_11_MAC_ADDRESS             MacAddress; // BSSID
-   UCHAR                               Reserved[2];
-   NDIS_802_11_SSID                    Ssid;       // SSID
-   ULONG                               Privacy;    // WEP encryption requirement
-   NDIS_802_11_RSSI                    Rssi;       // receive signal strength in dBm
-   NDIS_802_11_NETWORK_TYPE            NetworkTypeInUse;
-   NDIS_802_11_CONFIGURATION           Configuration;
-   NDIS_802_11_NETWORK_INFRASTRUCTURE  InfrastructureMode;
-   NDIS_802_11_RATES                   SupportedRates;
+typedef struct PACKED _NDIS_WLAN_BSSID {
+	ULONG Length;		// Length of this structure
+	NDIS_802_11_MAC_ADDRESS MacAddress;	// BSSID
+	UCHAR Reserved[2];
+	NDIS_802_11_SSID Ssid;	// SSID
+	ULONG Privacy;		// WEP encryption requirement
+	NDIS_802_11_RSSI Rssi;	// receive signal strength in dBm
+	NDIS_802_11_NETWORK_TYPE NetworkTypeInUse;
+	NDIS_802_11_CONFIGURATION Configuration;
+	NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode;
+	NDIS_802_11_RATES SupportedRates;
 } NDIS_WLAN_BSSID, *PNDIS_WLAN_BSSID;
 
-typedef struct PACKED _NDIS_802_11_BSSID_LIST
-{
-   UINT           NumberOfItems;      // in list below, at least 1
-   NDIS_WLAN_BSSID Bssid[1];
+typedef struct PACKED _NDIS_802_11_BSSID_LIST {
+	UINT NumberOfItems;	// in list below, at least 1
+	NDIS_WLAN_BSSID Bssid[1];
 } NDIS_802_11_BSSID_LIST, *PNDIS_802_11_BSSID_LIST;
 
 // Added Capabilities, IELength and IEs for each BSSID
-typedef struct PACKED _NDIS_WLAN_BSSID_EX
-{
-    ULONG                               Length;             // Length of this structure
-    NDIS_802_11_MAC_ADDRESS             MacAddress;         // BSSID
-    UCHAR                               Reserved[2];
-    NDIS_802_11_SSID                    Ssid;               // SSID
-    UINT                                Privacy;            // WEP encryption requirement
-    NDIS_802_11_RSSI                    Rssi;               // receive signal
-                                                            // strength in dBm
-    NDIS_802_11_NETWORK_TYPE            NetworkTypeInUse;
-    NDIS_802_11_CONFIGURATION           Configuration;
-    NDIS_802_11_NETWORK_INFRASTRUCTURE  InfrastructureMode;
-    NDIS_802_11_RATES_EX                SupportedRates;
-    ULONG                               IELength;
-    UCHAR                               IEs[1];
+typedef struct PACKED _NDIS_WLAN_BSSID_EX {
+	ULONG Length;		// Length of this structure
+	NDIS_802_11_MAC_ADDRESS MacAddress;	// BSSID
+	UCHAR Reserved[2];
+	NDIS_802_11_SSID Ssid;	// SSID
+	UINT Privacy;		// WEP encryption requirement
+	NDIS_802_11_RSSI Rssi;	// receive signal
+	// strength in dBm
+	NDIS_802_11_NETWORK_TYPE NetworkTypeInUse;
+	NDIS_802_11_CONFIGURATION Configuration;
+	NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode;
+	NDIS_802_11_RATES_EX SupportedRates;
+	ULONG IELength;
+	UCHAR IEs[1];
 } NDIS_WLAN_BSSID_EX, *PNDIS_WLAN_BSSID_EX;
 
-typedef struct PACKED _NDIS_802_11_BSSID_LIST_EX
-{
-    UINT                   NumberOfItems;      // in list below, at least 1
-    NDIS_WLAN_BSSID_EX      Bssid[1];
+typedef struct PACKED _NDIS_802_11_BSSID_LIST_EX {
+	UINT NumberOfItems;	// in list below, at least 1
+	NDIS_WLAN_BSSID_EX Bssid[1];
 } NDIS_802_11_BSSID_LIST_EX, *PNDIS_802_11_BSSID_LIST_EX;
 
-typedef struct PACKED _NDIS_802_11_FIXED_IEs
-{
-    UCHAR Timestamp[8];
-    USHORT BeaconInterval;
-    USHORT Capabilities;
+typedef struct PACKED _NDIS_802_11_FIXED_IEs {
+	UCHAR Timestamp[8];
+	USHORT BeaconInterval;
+	USHORT Capabilities;
 } NDIS_802_11_FIXED_IEs, *PNDIS_802_11_FIXED_IEs;
 
-typedef struct _NDIS_802_11_VARIABLE_IEs
-{
-    UCHAR ElementID;
-    UCHAR Length;    // Number of bytes in data field
-    UCHAR data[1];
+typedef struct _NDIS_802_11_VARIABLE_IEs {
+	UCHAR ElementID;
+	UCHAR Length;		// Number of bytes in data field
+	UCHAR data[1];
 } NDIS_802_11_VARIABLE_IEs, *PNDIS_802_11_VARIABLE_IEs;
 
-typedef  ULONG   NDIS_802_11_FRAGMENTATION_THRESHOLD;
+typedef ULONG NDIS_802_11_FRAGMENTATION_THRESHOLD;
 
-typedef  ULONG   NDIS_802_11_RTS_THRESHOLD;
+typedef ULONG NDIS_802_11_RTS_THRESHOLD;
 
-typedef  ULONG   NDIS_802_11_ANTENNA;
+typedef ULONG NDIS_802_11_ANTENNA;
 
-typedef enum _NDIS_802_11_PRIVACY_FILTER
-{
-   Ndis802_11PrivFilterAcceptAll,
-   Ndis802_11PrivFilter8021xWEP
+typedef enum _NDIS_802_11_PRIVACY_FILTER {
+	Ndis802_11PrivFilterAcceptAll,
+	Ndis802_11PrivFilter8021xWEP
 } NDIS_802_11_PRIVACY_FILTER, *PNDIS_802_11_PRIVACY_FILTER;
 
 // Added new encryption types
 // Also aliased typedef to new name
-typedef enum _NDIS_802_11_WEP_STATUS
-{
-   Ndis802_11WEPEnabled,
-    Ndis802_11Encryption1Enabled = Ndis802_11WEPEnabled,
-   Ndis802_11WEPDisabled,
-    Ndis802_11EncryptionDisabled = Ndis802_11WEPDisabled,
-   Ndis802_11WEPKeyAbsent,
-    Ndis802_11Encryption1KeyAbsent = Ndis802_11WEPKeyAbsent,
-   Ndis802_11WEPNotSupported,
-    Ndis802_11EncryptionNotSupported = Ndis802_11WEPNotSupported,
-    Ndis802_11Encryption2Enabled,
-    Ndis802_11Encryption2KeyAbsent,
-    Ndis802_11Encryption3Enabled,
-    Ndis802_11Encryption3KeyAbsent,
-    Ndis802_11Encryption4Enabled,	// TKIP or AES mix
-    Ndis802_11Encryption4KeyAbsent,
-    Ndis802_11GroupWEP40Enabled,
+typedef enum _NDIS_802_11_WEP_STATUS {
+	Ndis802_11WEPEnabled,
+	Ndis802_11Encryption1Enabled = Ndis802_11WEPEnabled,
+	Ndis802_11WEPDisabled,
+	Ndis802_11EncryptionDisabled = Ndis802_11WEPDisabled,
+	Ndis802_11WEPKeyAbsent,
+	Ndis802_11Encryption1KeyAbsent = Ndis802_11WEPKeyAbsent,
+	Ndis802_11WEPNotSupported,
+	Ndis802_11EncryptionNotSupported = Ndis802_11WEPNotSupported,
+	Ndis802_11Encryption2Enabled,
+	Ndis802_11Encryption2KeyAbsent,
+	Ndis802_11Encryption3Enabled,
+	Ndis802_11Encryption3KeyAbsent,
+	Ndis802_11Encryption4Enabled,	// TKIP or AES mix
+	Ndis802_11Encryption4KeyAbsent,
+	Ndis802_11GroupWEP40Enabled,
 	Ndis802_11GroupWEP104Enabled,
 } NDIS_802_11_WEP_STATUS, *PNDIS_802_11_WEP_STATUS,
-  NDIS_802_11_ENCRYPTION_STATUS, *PNDIS_802_11_ENCRYPTION_STATUS;
+    NDIS_802_11_ENCRYPTION_STATUS, *PNDIS_802_11_ENCRYPTION_STATUS;
 
-typedef enum _NDIS_802_11_RELOAD_DEFAULTS
-{
-   Ndis802_11ReloadWEPKeys
+typedef enum _NDIS_802_11_RELOAD_DEFAULTS {
+	Ndis802_11ReloadWEPKeys
 } NDIS_802_11_RELOAD_DEFAULTS, *PNDIS_802_11_RELOAD_DEFAULTS;
 
 #define NDIS_802_11_AI_REQFI_CAPABILITIES      1
@@ -469,122 +436,110 @@ typedef enum _NDIS_802_11_RELOAD_DEFAULTS
 #define NDIS_802_11_AI_RESFI_STATUSCODE        2
 #define NDIS_802_11_AI_RESFI_ASSOCIATIONID     4
 
-typedef struct _NDIS_802_11_AI_REQFI
-{
-    USHORT Capabilities;
-    USHORT ListenInterval;
-    NDIS_802_11_MAC_ADDRESS  CurrentAPAddress;
+typedef struct _NDIS_802_11_AI_REQFI {
+	USHORT Capabilities;
+	USHORT ListenInterval;
+	NDIS_802_11_MAC_ADDRESS CurrentAPAddress;
 } NDIS_802_11_AI_REQFI, *PNDIS_802_11_AI_REQFI;
 
-typedef struct _NDIS_802_11_AI_RESFI
-{
-    USHORT Capabilities;
-    USHORT StatusCode;
-    USHORT AssociationId;
+typedef struct _NDIS_802_11_AI_RESFI {
+	USHORT Capabilities;
+	USHORT StatusCode;
+	USHORT AssociationId;
 } NDIS_802_11_AI_RESFI, *PNDIS_802_11_AI_RESFI;
 
-typedef struct _NDIS_802_11_ASSOCIATION_INFORMATION
-{
-    ULONG                   Length;
-    USHORT                  AvailableRequestFixedIEs;
-    NDIS_802_11_AI_REQFI    RequestFixedIEs;
-    ULONG                   RequestIELength;
-    ULONG                   OffsetRequestIEs;
-    USHORT                  AvailableResponseFixedIEs;
-    NDIS_802_11_AI_RESFI    ResponseFixedIEs;
-    ULONG                   ResponseIELength;
-    ULONG                   OffsetResponseIEs;
+typedef struct _NDIS_802_11_ASSOCIATION_INFORMATION {
+	ULONG Length;
+	USHORT AvailableRequestFixedIEs;
+	NDIS_802_11_AI_REQFI RequestFixedIEs;
+	ULONG RequestIELength;
+	ULONG OffsetRequestIEs;
+	USHORT AvailableResponseFixedIEs;
+	NDIS_802_11_AI_RESFI ResponseFixedIEs;
+	ULONG ResponseIELength;
+	ULONG OffsetResponseIEs;
 } NDIS_802_11_ASSOCIATION_INFORMATION, *PNDIS_802_11_ASSOCIATION_INFORMATION;
 
-typedef struct _NDIS_802_11_AUTHENTICATION_EVENT
-{
-    NDIS_802_11_STATUS_INDICATION       Status;
-    NDIS_802_11_AUTHENTICATION_REQUEST  Request[1];
+typedef struct _NDIS_802_11_AUTHENTICATION_EVENT {
+	NDIS_802_11_STATUS_INDICATION Status;
+	NDIS_802_11_AUTHENTICATION_REQUEST Request[1];
 } NDIS_802_11_AUTHENTICATION_EVENT, *PNDIS_802_11_AUTHENTICATION_EVENT;
 
 // 802.11 Media stream constraints, associated with OID_802_11_MEDIA_STREAM_MODE
-typedef enum _NDIS_802_11_MEDIA_STREAM_MODE
-{
-    Ndis802_11MediaStreamOff,
-    Ndis802_11MediaStreamOn,
+typedef enum _NDIS_802_11_MEDIA_STREAM_MODE {
+	Ndis802_11MediaStreamOff,
+	Ndis802_11MediaStreamOn,
 } NDIS_802_11_MEDIA_STREAM_MODE, *PNDIS_802_11_MEDIA_STREAM_MODE;
 
 // PMKID Structures
-typedef UCHAR   NDIS_802_11_PMKID_VALUE[16];
+typedef UCHAR NDIS_802_11_PMKID_VALUE[16];
 
-typedef struct _BSSID_INFO
-{
-    NDIS_802_11_MAC_ADDRESS BSSID;
-    NDIS_802_11_PMKID_VALUE PMKID;
+typedef struct _BSSID_INFO {
+	NDIS_802_11_MAC_ADDRESS BSSID;
+	NDIS_802_11_PMKID_VALUE PMKID;
 } BSSID_INFO, *PBSSID_INFO;
 
-typedef struct _NDIS_802_11_PMKID
-{
-    UINT    Length;
-    UINT    BSSIDInfoCount;
-    BSSID_INFO BSSIDInfo[1];
+typedef struct _NDIS_802_11_PMKID {
+	UINT Length;
+	UINT BSSIDInfoCount;
+	BSSID_INFO BSSIDInfo[1];
 } NDIS_802_11_PMKID, *PNDIS_802_11_PMKID;
 
-typedef struct _NDIS_802_11_AUTHENTICATION_ENCRYPTION
-{
-    NDIS_802_11_AUTHENTICATION_MODE AuthModeSupported;
-    NDIS_802_11_ENCRYPTION_STATUS EncryptStatusSupported;
-} NDIS_802_11_AUTHENTICATION_ENCRYPTION, *PNDIS_802_11_AUTHENTICATION_ENCRYPTION;
-
-typedef struct _NDIS_802_11_CAPABILITY
-{
-     ULONG Length;
-     ULONG Version;
-     ULONG NoOfPMKIDs;
-     ULONG NoOfAuthEncryptPairsSupported;
-     NDIS_802_11_AUTHENTICATION_ENCRYPTION AuthenticationEncryptionSupported[1];
+typedef struct _NDIS_802_11_AUTHENTICATION_ENCRYPTION {
+	NDIS_802_11_AUTHENTICATION_MODE AuthModeSupported;
+	NDIS_802_11_ENCRYPTION_STATUS EncryptStatusSupported;
+} NDIS_802_11_AUTHENTICATION_ENCRYPTION,
+    *PNDIS_802_11_AUTHENTICATION_ENCRYPTION;
+
+typedef struct _NDIS_802_11_CAPABILITY {
+	ULONG Length;
+	ULONG Version;
+	ULONG NoOfPMKIDs;
+	ULONG NoOfAuthEncryptPairsSupported;
+	NDIS_802_11_AUTHENTICATION_ENCRYPTION
+	    AuthenticationEncryptionSupported[1];
 } NDIS_802_11_CAPABILITY, *PNDIS_802_11_CAPABILITY;
 
-#define RT_PRIV_IOCTL							(SIOCIWFIRSTPRIV + 0x01) // Sync. with AP for wsc upnp daemon
+#define RT_PRIV_IOCTL							(SIOCIWFIRSTPRIV + 0x01)	// Sync. with AP for wsc upnp daemon
 #define RTPRIV_IOCTL_SET							(SIOCIWFIRSTPRIV + 0x02)
 
 #define RTPRIV_IOCTL_STATISTICS                     (SIOCIWFIRSTPRIV + 0x09)
 #define RTPRIV_IOCTL_ADD_PMKID_CACHE                (SIOCIWFIRSTPRIV + 0x0A)
 #define RTPRIV_IOCTL_RADIUS_DATA                    (SIOCIWFIRSTPRIV + 0x0C)
 #define RTPRIV_IOCTL_GSITESURVEY					(SIOCIWFIRSTPRIV + 0x0D)
-#define RT_PRIV_IOCTL_EXT							(SIOCIWFIRSTPRIV + 0x0E) // Sync. with RT61 (for wpa_supplicant)
+#define RT_PRIV_IOCTL_EXT							(SIOCIWFIRSTPRIV + 0x0E)	// Sync. with RT61 (for wpa_supplicant)
 #define RTPRIV_IOCTL_GET_MAC_TABLE					(SIOCIWFIRSTPRIV + 0x0F)
 
 #define RTPRIV_IOCTL_SHOW							(SIOCIWFIRSTPRIV + 0x11)
 enum {
-    SHOW_CONN_STATUS = 4,
-    SHOW_DRVIER_VERION = 5,
-    SHOW_BA_INFO = 6,
+	SHOW_CONN_STATUS = 4,
+	SHOW_DRVIER_VERION = 5,
+	SHOW_BA_INFO = 6,
 	SHOW_DESC_INFO = 7,
 #ifdef RTMP_MAC_USB
 	SHOW_RXBULK_INFO = 8,
 	SHOW_TXBULK_INFO = 9,
 #endif // RTMP_MAC_USB //
-    RAIO_OFF = 10,
-    RAIO_ON = 11,
+	RAIO_OFF = 10,
+	RAIO_ON = 11,
 	SHOW_CFG_VALUE = 20,
 	SHOW_ADHOC_ENTRY_INFO = 21,
 };
 
-
-
-
-
-
 #define OID_802_11_BUILD_CHANNEL_EX				0x0714
 #define OID_802_11_GET_CH_LIST					0x0715
 #define OID_802_11_GET_COUNTRY_CODE				0x0716
 #define OID_802_11_GET_CHANNEL_GEOGRAPHY		0x0717
 
-#define RT_OID_WSC_SET_PASSPHRASE                   0x0740 // passphrase for wpa(2)-psk
+#define RT_OID_WSC_SET_PASSPHRASE                   0x0740	// passphrase for wpa(2)-psk
 #define RT_OID_WSC_DRIVER_AUTO_CONNECT              0x0741
 #define RT_OID_WSC_QUERY_DEFAULT_PROFILE            0x0742
 #define RT_OID_WSC_SET_CONN_BY_PROFILE_INDEX        0x0743
 #define RT_OID_WSC_SET_ACTION                       0x0744
 #define RT_OID_WSC_SET_SSID                         0x0745
 #define RT_OID_WSC_SET_PIN_CODE                     0x0746
-#define RT_OID_WSC_SET_MODE                         0x0747 // PIN or PBC
-#define RT_OID_WSC_SET_CONF_MODE                    0x0748 // Enrollee or Registrar
+#define RT_OID_WSC_SET_MODE                         0x0747	// PIN or PBC
+#define RT_OID_WSC_SET_CONF_MODE                    0x0748	// Enrollee or Registrar
 #define RT_OID_WSC_SET_PROFILE                      0x0749
 #define	RT_OID_WSC_CONFIG_STATUS					0x074F
 #define RT_OID_802_11_WSC_QUERY_PROFILE				0x0750
@@ -604,24 +559,24 @@ enum {
 #define OID_MH_802_1X_SUPPORTED               0xFFEDC100
 
 // MIMO Tx parameter, ShortGI, MCS, STBC, etc.  these are fields in TXWI. Don't change this definition!!!
-typedef union  _HTTRANSMIT_SETTING {
-	struct	{
-	USHORT   	MCS:7;                 // MCS
-	USHORT		BW:1;	//channel bandwidth 20MHz or 40 MHz
-	USHORT		ShortGI:1;
-	USHORT		STBC:2;	//SPACE
-//	USHORT		rsv:3;
-	USHORT		rsv:2;
-	USHORT		TxBF:1;
-	USHORT		MODE:2;	// Use definition MODE_xxx.
-	}	field;
-	USHORT		word;
- } HTTRANSMIT_SETTING, *PHTTRANSMIT_SETTING;
+typedef union _HTTRANSMIT_SETTING {
+	struct {
+		USHORT MCS:7;	// MCS
+		USHORT BW:1;	//channel bandwidth 20MHz or 40 MHz
+		USHORT ShortGI:1;
+		USHORT STBC:2;	//SPACE
+//      USHORT          rsv:3;
+		USHORT rsv:2;
+		USHORT TxBF:1;
+		USHORT MODE:2;	// Use definition MODE_xxx.
+	} field;
+	USHORT word;
+} HTTRANSMIT_SETTING, *PHTTRANSMIT_SETTING;
 
 typedef enum _RT_802_11_PREAMBLE {
-    Rt802_11PreambleLong,
-    Rt802_11PreambleShort,
-    Rt802_11PreambleAuto
+	Rt802_11PreambleLong,
+	Rt802_11PreambleShort,
+	Rt802_11PreambleAuto
 } RT_802_11_PREAMBLE, *PRT_802_11_PREAMBLE;
 
 typedef enum _RT_802_11_PHY_MODE {
@@ -631,200 +586,194 @@ typedef enum _RT_802_11_PHY_MODE {
 	PHY_11ABG_MIXED,
 	PHY_11G,
 	PHY_11ABGN_MIXED,	// both band   5
-	PHY_11N_2_4G,		// 11n-only with 2.4G band   	6
-	PHY_11GN_MIXED,	// 2.4G band      7
-	PHY_11AN_MIXED,	// 5G  band       8
+	PHY_11N_2_4G,		// 11n-only with 2.4G band      6
+	PHY_11GN_MIXED,		// 2.4G band      7
+	PHY_11AN_MIXED,		// 5G  band       8
 	PHY_11BGN_MIXED,	// if check 802.11b.      9
 	PHY_11AGN_MIXED,	// if check 802.11b.      10
-	PHY_11N_5G,			// 11n-only with 5G band		11
+	PHY_11N_5G,		// 11n-only with 5G band                11
 } RT_802_11_PHY_MODE;
 
 // put all proprietery for-query objects here to reduce # of Query_OID
 typedef struct _RT_802_11_LINK_STATUS {
-    ULONG   CurrTxRate;         // in units of 0.5Mbps
-    ULONG   ChannelQuality;     // 0..100 %
-    ULONG   TxByteCount;        // both ok and fail
-    ULONG   RxByteCount;        // both ok and fail
-    ULONG	CentralChannel;		// 40MHz central channel number
+	ULONG CurrTxRate;	// in units of 0.5Mbps
+	ULONG ChannelQuality;	// 0..100 %
+	ULONG TxByteCount;	// both ok and fail
+	ULONG RxByteCount;	// both ok and fail
+	ULONG CentralChannel;	// 40MHz central channel number
 } RT_802_11_LINK_STATUS, *PRT_802_11_LINK_STATUS;
 
 typedef struct _RT_802_11_EVENT_LOG {
-    LARGE_INTEGER   SystemTime;  // timestammp via NdisGetCurrentSystemTime()
-    UCHAR           Addr[MAC_ADDR_LENGTH];
-    USHORT          Event;       // EVENT_xxx
+	LARGE_INTEGER SystemTime;	// timestammp via NdisGetCurrentSystemTime()
+	UCHAR Addr[MAC_ADDR_LENGTH];
+	USHORT Event;		// EVENT_xxx
 } RT_802_11_EVENT_LOG, *PRT_802_11_EVENT_LOG;
 
 typedef struct _RT_802_11_EVENT_TABLE {
-    ULONG       Num;
-    ULONG       Rsv;     // to align Log[] at LARGE_INEGER boundary
-    RT_802_11_EVENT_LOG   Log[MAX_NUMBER_OF_EVENT];
+	ULONG Num;
+	ULONG Rsv;		// to align Log[] at LARGE_INEGER boundary
+	RT_802_11_EVENT_LOG Log[MAX_NUMBER_OF_EVENT];
 } RT_802_11_EVENT_TABLE, PRT_802_11_EVENT_TABLE;
 
 // MIMO Tx parameter, ShortGI, MCS, STBC, etc.  these are fields in TXWI. Don't change this definition!!!
-typedef union  _MACHTTRANSMIT_SETTING {
-	struct	{
-	USHORT   	MCS:7;                 // MCS
-	USHORT		BW:1;	//channel bandwidth 20MHz or 40 MHz
-	USHORT		ShortGI:1;
-	USHORT		STBC:2;	//SPACE
-	USHORT		rsv:3;
-	USHORT		MODE:2;	// Use definition MODE_xxx.
-	}	field;
-	USHORT		word;
- } MACHTTRANSMIT_SETTING, *PMACHTTRANSMIT_SETTING;
+typedef union _MACHTTRANSMIT_SETTING {
+	struct {
+		USHORT MCS:7;	// MCS
+		USHORT BW:1;	//channel bandwidth 20MHz or 40 MHz
+		USHORT ShortGI:1;
+		USHORT STBC:2;	//SPACE
+		USHORT rsv:3;
+		USHORT MODE:2;	// Use definition MODE_xxx.
+	} field;
+	USHORT word;
+} MACHTTRANSMIT_SETTING, *PMACHTTRANSMIT_SETTING;
 
 typedef struct _RT_802_11_MAC_ENTRY {
-    UCHAR       Addr[MAC_ADDR_LENGTH];
-    UCHAR       Aid;
-    UCHAR       Psm;     // 0:PWR_ACTIVE, 1:PWR_SAVE
-    UCHAR		MimoPs;  // 0:MMPS_STATIC, 1:MMPS_DYNAMIC, 3:MMPS_Enabled
-    CHAR		AvgRssi0;
-	CHAR		AvgRssi1;
-	CHAR		AvgRssi2;
-	UINT32		ConnectedTime;
-    MACHTTRANSMIT_SETTING	TxRate;
+	UCHAR Addr[MAC_ADDR_LENGTH];
+	UCHAR Aid;
+	UCHAR Psm;		// 0:PWR_ACTIVE, 1:PWR_SAVE
+	UCHAR MimoPs;		// 0:MMPS_STATIC, 1:MMPS_DYNAMIC, 3:MMPS_Enabled
+	CHAR AvgRssi0;
+	CHAR AvgRssi1;
+	CHAR AvgRssi2;
+	UINT32 ConnectedTime;
+	MACHTTRANSMIT_SETTING TxRate;
 } RT_802_11_MAC_ENTRY, *PRT_802_11_MAC_ENTRY;
 
 typedef struct _RT_802_11_MAC_TABLE {
-    ULONG       Num;
-    RT_802_11_MAC_ENTRY Entry[MAX_NUMBER_OF_MAC];
+	ULONG Num;
+	RT_802_11_MAC_ENTRY Entry[MAX_NUMBER_OF_MAC];
 } RT_802_11_MAC_TABLE, *PRT_802_11_MAC_TABLE;
 
 // structure for query/set hardware register - MAC, BBP, RF register
 typedef struct _RT_802_11_HARDWARE_REGISTER {
-    ULONG   HardwareType;       // 0:MAC, 1:BBP, 2:RF register, 3:EEPROM
-    ULONG   Offset;             // Q/S register offset addr
-    ULONG   Data;               // R/W data buffer
+	ULONG HardwareType;	// 0:MAC, 1:BBP, 2:RF register, 3:EEPROM
+	ULONG Offset;		// Q/S register offset addr
+	ULONG Data;		// R/W data buffer
 } RT_802_11_HARDWARE_REGISTER, *PRT_802_11_HARDWARE_REGISTER;
 
 typedef struct _RT_802_11_AP_CONFIG {
-    ULONG   EnableTxBurst;      // 0-disable, 1-enable
-    ULONG   EnableTurboRate;    // 0-disable, 1-enable 72/100mbps turbo rate
-    ULONG   IsolateInterStaTraffic;     // 0-disable, 1-enable isolation
-    ULONG   HideSsid;           // 0-disable, 1-enable hiding
-    ULONG   UseBGProtection;    // 0-AUTO, 1-always ON, 2-always OFF
-    ULONG   UseShortSlotTime;   // 0-no use, 1-use 9-us short slot time
-    ULONG   Rsv1;               // must be 0
-    ULONG   SystemErrorBitmap;  // ignore upon SET, return system error upon QUERY
+	ULONG EnableTxBurst;	// 0-disable, 1-enable
+	ULONG EnableTurboRate;	// 0-disable, 1-enable 72/100mbps turbo rate
+	ULONG IsolateInterStaTraffic;	// 0-disable, 1-enable isolation
+	ULONG HideSsid;		// 0-disable, 1-enable hiding
+	ULONG UseBGProtection;	// 0-AUTO, 1-always ON, 2-always OFF
+	ULONG UseShortSlotTime;	// 0-no use, 1-use 9-us short slot time
+	ULONG Rsv1;		// must be 0
+	ULONG SystemErrorBitmap;	// ignore upon SET, return system error upon QUERY
 } RT_802_11_AP_CONFIG, *PRT_802_11_AP_CONFIG;
 
 // structure to query/set STA_CONFIG
 typedef struct _RT_802_11_STA_CONFIG {
-    ULONG   EnableTxBurst;      // 0-disable, 1-enable
-    ULONG   EnableTurboRate;    // 0-disable, 1-enable 72/100mbps turbo rate
-    ULONG   UseBGProtection;    // 0-AUTO, 1-always ON, 2-always OFF
-    ULONG   UseShortSlotTime;   // 0-no use, 1-use 9-us short slot time when applicable
-    ULONG   AdhocMode; 			// 0-11b rates only (WIFI spec), 1 - b/g mixed, 2 - g only
-    ULONG   HwRadioStatus;      // 0-OFF, 1-ON, default is 1, Read-Only
-    ULONG   Rsv1;               // must be 0
-    ULONG   SystemErrorBitmap;  // ignore upon SET, return system error upon QUERY
+	ULONG EnableTxBurst;	// 0-disable, 1-enable
+	ULONG EnableTurboRate;	// 0-disable, 1-enable 72/100mbps turbo rate
+	ULONG UseBGProtection;	// 0-AUTO, 1-always ON, 2-always OFF
+	ULONG UseShortSlotTime;	// 0-no use, 1-use 9-us short slot time when applicable
+	ULONG AdhocMode;	// 0-11b rates only (WIFI spec), 1 - b/g mixed, 2 - g only
+	ULONG HwRadioStatus;	// 0-OFF, 1-ON, default is 1, Read-Only
+	ULONG Rsv1;		// must be 0
+	ULONG SystemErrorBitmap;	// ignore upon SET, return system error upon QUERY
 } RT_802_11_STA_CONFIG, *PRT_802_11_STA_CONFIG;
 
 //
 //  For OID Query or Set about BA structure
 //
-typedef	struct	_OID_BACAP_STRUC	{
-		UCHAR		RxBAWinLimit;
-		UCHAR		TxBAWinLimit;
-		UCHAR		Policy;	// 0: DELAY_BA 1:IMMED_BA  (//BA Policy subfiled value in ADDBA frame)   2:BA-not use. other value invalid
-		UCHAR		MpduDensity;	// 0: DELAY_BA 1:IMMED_BA  (//BA Policy subfiled value in ADDBA frame)   2:BA-not use. other value invalid
-		UCHAR       	AmsduEnable;	//Enable AMSDU transmisstion
-		UCHAR       	AmsduSize;	// 0:3839, 1:7935 bytes. UINT  MSDUSizeToBytes[]	= { 3839, 7935};
-		UCHAR       	MMPSmode;	// MIMO power save more, 0:static, 1:dynamic, 2:rsv, 3:mimo enable
-		BOOLEAN		AutoBA;	// Auto BA will automatically
+typedef struct _OID_BACAP_STRUC {
+	UCHAR RxBAWinLimit;
+	UCHAR TxBAWinLimit;
+	UCHAR Policy;		// 0: DELAY_BA 1:IMMED_BA  (//BA Policy subfiled value in ADDBA frame)   2:BA-not use. other value invalid
+	UCHAR MpduDensity;	// 0: DELAY_BA 1:IMMED_BA  (//BA Policy subfiled value in ADDBA frame)   2:BA-not use. other value invalid
+	UCHAR AmsduEnable;	//Enable AMSDU transmisstion
+	UCHAR AmsduSize;	// 0:3839, 1:7935 bytes. UINT  MSDUSizeToBytes[]        = { 3839, 7935};
+	UCHAR MMPSmode;		// MIMO power save more, 0:static, 1:dynamic, 2:rsv, 3:mimo enable
+	BOOLEAN AutoBA;		// Auto BA will automatically
 } OID_BACAP_STRUC, *POID_BACAP_STRUC;
 
 typedef struct _RT_802_11_ACL_ENTRY {
-    UCHAR   Addr[MAC_ADDR_LENGTH];
-    USHORT  Rsv;
+	UCHAR Addr[MAC_ADDR_LENGTH];
+	USHORT Rsv;
 } RT_802_11_ACL_ENTRY, *PRT_802_11_ACL_ENTRY;
 
 typedef struct PACKED _RT_802_11_ACL {
-    ULONG   Policy;             // 0-disable, 1-positive list, 2-negative list
-    ULONG   Num;
-    RT_802_11_ACL_ENTRY Entry[MAX_NUMBER_OF_ACL];
+	ULONG Policy;		// 0-disable, 1-positive list, 2-negative list
+	ULONG Num;
+	RT_802_11_ACL_ENTRY Entry[MAX_NUMBER_OF_ACL];
 } RT_802_11_ACL, *PRT_802_11_ACL;
 
 typedef struct _RT_802_11_WDS {
-    ULONG						Num;
-    NDIS_802_11_MAC_ADDRESS		Entry[24/*MAX_NUM_OF_WDS_LINK*/];
-	ULONG						KeyLength;
-	UCHAR						KeyMaterial[32];
+	ULONG Num;
+	NDIS_802_11_MAC_ADDRESS Entry[24 /*MAX_NUM_OF_WDS_LINK */ ];
+	ULONG KeyLength;
+	UCHAR KeyMaterial[32];
 } RT_802_11_WDS, *PRT_802_11_WDS;
 
 typedef struct _RT_802_11_TX_RATES_ {
-    UCHAR       SupRateLen;
-    UCHAR       SupRate[MAX_LENGTH_OF_SUPPORT_RATES];
-    UCHAR       ExtRateLen;
-    UCHAR       ExtRate[MAX_LENGTH_OF_SUPPORT_RATES];
+	UCHAR SupRateLen;
+	UCHAR SupRate[MAX_LENGTH_OF_SUPPORT_RATES];
+	UCHAR ExtRateLen;
+	UCHAR ExtRate[MAX_LENGTH_OF_SUPPORT_RATES];
 } RT_802_11_TX_RATES, *PRT_802_11_TX_RATES;
 
-
 // Definition of extra information code
-#define	GENERAL_LINK_UP			0x0			// Link is Up
-#define	GENERAL_LINK_DOWN		0x1			// Link is Down
-#define	HW_RADIO_OFF			0x2			// Hardware radio off
-#define	SW_RADIO_OFF			0x3			// Software radio off
-#define	AUTH_FAIL				0x4			// Open authentication fail
-#define	AUTH_FAIL_KEYS			0x5			// Shared authentication fail
-#define	ASSOC_FAIL				0x6			// Association failed
-#define	EAP_MIC_FAILURE			0x7			// Deauthencation because MIC failure
-#define	EAP_4WAY_TIMEOUT		0x8			// Deauthencation on 4-way handshake timeout
-#define	EAP_GROUP_KEY_TIMEOUT	0x9			// Deauthencation on group key handshake timeout
-#define	EAP_SUCCESS				0xa			// EAP succeed
-#define	DETECT_RADAR_SIGNAL		0xb         // Radar signal occur in current channel
-#define EXTRA_INFO_MAX			0xb			// Indicate Last OID
+#define	GENERAL_LINK_UP			0x0	// Link is Up
+#define	GENERAL_LINK_DOWN		0x1	// Link is Down
+#define	HW_RADIO_OFF			0x2	// Hardware radio off
+#define	SW_RADIO_OFF			0x3	// Software radio off
+#define	AUTH_FAIL				0x4	// Open authentication fail
+#define	AUTH_FAIL_KEYS			0x5	// Shared authentication fail
+#define	ASSOC_FAIL				0x6	// Association failed
+#define	EAP_MIC_FAILURE			0x7	// Deauthencation because MIC failure
+#define	EAP_4WAY_TIMEOUT		0x8	// Deauthencation on 4-way handshake timeout
+#define	EAP_GROUP_KEY_TIMEOUT	0x9	// Deauthencation on group key handshake timeout
+#define	EAP_SUCCESS				0xa	// EAP succeed
+#define	DETECT_RADAR_SIGNAL		0xb	// Radar signal occur in current channel
+#define EXTRA_INFO_MAX			0xb	// Indicate Last OID
 
 #define EXTRA_INFO_CLEAR		0xffffffff
 
 // This is OID setting structure. So only GF or MM as Mode. This is valid when our wirelss mode has 802.11n in use.
 typedef struct {
-	RT_802_11_PHY_MODE		PhyMode; 	//
-	UCHAR		TransmitNo;
-	UCHAR		HtMode; 	//HTMODE_GF or HTMODE_MM
-	UCHAR		ExtOffset;	//extension channel above or below
-	UCHAR		MCS;
-	UCHAR   	BW;
-	UCHAR		STBC;
-	UCHAR		SHORTGI;
-	UCHAR		rsv;
+	RT_802_11_PHY_MODE PhyMode;	//
+	UCHAR TransmitNo;
+	UCHAR HtMode;		//HTMODE_GF or HTMODE_MM
+	UCHAR ExtOffset;	//extension channel above or below
+	UCHAR MCS;
+	UCHAR BW;
+	UCHAR STBC;
+	UCHAR SHORTGI;
+	UCHAR rsv;
 } OID_SET_HT_PHYMODE, *POID_SET_HT_PHYMODE;
 
 #define MAX_CUSTOM_LEN 128
 
-typedef enum _RT_802_11_D_CLIENT_MODE
-{
-   Rt802_11_D_None,
-   Rt802_11_D_Flexible,
-   Rt802_11_D_Strict,
+typedef enum _RT_802_11_D_CLIENT_MODE {
+	Rt802_11_D_None,
+	Rt802_11_D_Flexible,
+	Rt802_11_D_Strict,
 } RT_802_11_D_CLIENT_MODE, *PRT_802_11_D_CLIENT_MODE;
 
-typedef struct _RT_CHANNEL_LIST_INFO
-{
-	UCHAR ChannelList[MAX_NUM_OF_CHS];   // list all supported channels for site survey
-	UCHAR ChannelListNum; // number of channel in ChannelList[]
+typedef struct _RT_CHANNEL_LIST_INFO {
+	UCHAR ChannelList[MAX_NUM_OF_CHS];	// list all supported channels for site survey
+	UCHAR ChannelListNum;	// number of channel in ChannelList[]
 } RT_CHANNEL_LIST_INFO, *PRT_CHANNEL_LIST_INFO;
 
 // WSC configured credential
-typedef	struct	_WSC_CREDENTIAL
-{
-	NDIS_802_11_SSID	SSID;				// mandatory
-	USHORT				AuthType;			// mandatory, 1: open, 2: wpa-psk, 4: shared, 8:wpa, 0x10: wpa2, 0x20: wpa2-psk
-	USHORT				EncrType;			// mandatory, 1: none, 2: wep, 4: tkip, 8: aes
-	UCHAR				Key[64];			// mandatory, Maximum 64 byte
-	USHORT				KeyLength;
-	UCHAR				MacAddr[6];			// mandatory, AP MAC address
-	UCHAR				KeyIndex;			// optional, default is 1
-	UCHAR				Rsvd[3];			// Make alignment
-}	WSC_CREDENTIAL, *PWSC_CREDENTIAL;
+typedef struct _WSC_CREDENTIAL {
+	NDIS_802_11_SSID SSID;	// mandatory
+	USHORT AuthType;	// mandatory, 1: open, 2: wpa-psk, 4: shared, 8:wpa, 0x10: wpa2, 0x20: wpa2-psk
+	USHORT EncrType;	// mandatory, 1: none, 2: wep, 4: tkip, 8: aes
+	UCHAR Key[64];		// mandatory, Maximum 64 byte
+	USHORT KeyLength;
+	UCHAR MacAddr[6];	// mandatory, AP MAC address
+	UCHAR KeyIndex;		// optional, default is 1
+	UCHAR Rsvd[3];		// Make alignment
+} WSC_CREDENTIAL, *PWSC_CREDENTIAL;
 
 // WSC configured profiles
-typedef	struct	_WSC_PROFILE
-{
-	UINT			ProfileCnt;
-	UINT			ApplyProfileIdx;  // add by johnli, fix WPS test plan 5.1.1
-	WSC_CREDENTIAL	Profile[8];				// Support up to 8 profiles
-}	WSC_PROFILE, *PWSC_PROFILE;
+typedef struct _WSC_PROFILE {
+	UINT ProfileCnt;
+	UINT ApplyProfileIdx;	// add by johnli, fix WPS test plan 5.1.1
+	WSC_CREDENTIAL Profile[8];	// Support up to 8 profiles
+} WSC_PROFILE, *PWSC_PROFILE;
 
 #endif // _OID_H_
-

drivers/staging/rt2860/rt_config.h

@@ -68,5 +68,4 @@
 #include "igmp_snoop.h"
 #endif // IGMP_SNOOP_SUPPORT //
 
-#endif	// __RT_CONFIG_H__
-
+#endif // __RT_CONFIG_H__

drivers/staging/rt2860/rt_linux.h

@@ -79,7 +79,6 @@
  *	Profile related sections
  ***********************************************************************************/
 
-
 #ifdef RTMP_MAC_PCI
 #define STA_PROFILE_PATH			"/etc/Wireless/RT2860STA/RT2860STA.dat"
 #define STA_DRIVER_VERSION			"2.1.0.0"
@@ -90,8 +89,7 @@
 // RT3070 version: 2.1.1.0
 #endif // RTMP_MAC_USB //
 
-extern	const struct iw_handler_def rt28xx_iw_handler_def;
-
+extern const struct iw_handler_def rt28xx_iw_handler_def;
 
 /***********************************************************************************
  *	Compiler related definitions
@@ -103,23 +101,23 @@ extern	const struct iw_handler_def rt28xx_iw_handler_def;
 #define INOUT
 #define NDIS_STATUS		INT
 
-
 /***********************************************************************************
  *	OS Specific definitions and data structures
  ***********************************************************************************/
-typedef struct pci_dev		* PPCI_DEV;
-typedef struct net_device	* PNET_DEV;
-typedef void				* PNDIS_PACKET;
-typedef char				NDIS_PACKET;
-typedef PNDIS_PACKET		* PPNDIS_PACKET;
-typedef	dma_addr_t			NDIS_PHYSICAL_ADDRESS;
-typedef	dma_addr_t			* PNDIS_PHYSICAL_ADDRESS;
-typedef void				* NDIS_HANDLE;
-typedef char				* PNDIS_BUFFER;
-typedef	struct pid *	RTMP_OS_PID;
-typedef struct semaphore	RTMP_OS_SEM;
-
-typedef int (*HARD_START_XMIT_FUNC)(struct sk_buff *skb, struct net_device *net_dev);
+typedef struct pci_dev *PPCI_DEV;
+typedef struct net_device *PNET_DEV;
+typedef void *PNDIS_PACKET;
+typedef char NDIS_PACKET;
+typedef PNDIS_PACKET *PPNDIS_PACKET;
+typedef dma_addr_t NDIS_PHYSICAL_ADDRESS;
+typedef dma_addr_t *PNDIS_PHYSICAL_ADDRESS;
+typedef void *NDIS_HANDLE;
+typedef char *PNDIS_BUFFER;
+typedef struct pid *RTMP_OS_PID;
+typedef struct semaphore RTMP_OS_SEM;
+
+typedef int (*HARD_START_XMIT_FUNC) (struct sk_buff * skb,
+				     struct net_device * net_dev);
 
 #ifdef RTMP_MAC_PCI
 #ifndef PCI_DEVICE
@@ -142,11 +140,8 @@ typedef int (*HARD_START_XMIT_FUNC)(struct sk_buff *skb, struct net_device *net_
 #define RTMP_DEC_REF(_A)		0
 #define RTMP_GET_REF(_A)		0
 
-
 // This function will be called when query /proc
-struct iw_statistics *rt28xx_get_wireless_stats(
-    IN struct net_device *net_dev);
-
+struct iw_statistics *rt28xx_get_wireless_stats(IN struct net_device *net_dev);
 
 /***********************************************************************************
  *	Network related constant definitions
@@ -178,18 +173,16 @@ struct iw_statistics *rt28xx_get_wireless_stats(
 #define STATS_INC_RX_DROPPED(_pAd, _dev)
 #define STATS_INC_TX_DROPPED(_pAd, _dev)
 
-
 /***********************************************************************************
  *	Ralink Specific network related constant definitions
  ***********************************************************************************/
-#define MIN_NET_DEVICE_FOR_AID			0x00		//0x00~0x3f
-#define MIN_NET_DEVICE_FOR_MBSSID		0x00		//0x00,0x10,0x20,0x30
-#define MIN_NET_DEVICE_FOR_WDS			0x10		//0x40,0x50,0x60,0x70
+#define MIN_NET_DEVICE_FOR_AID			0x00	//0x00~0x3f
+#define MIN_NET_DEVICE_FOR_MBSSID		0x00	//0x00,0x10,0x20,0x30
+#define MIN_NET_DEVICE_FOR_WDS			0x10	//0x40,0x50,0x60,0x70
 #define MIN_NET_DEVICE_FOR_APCLI		0x20
 #define MIN_NET_DEVICE_FOR_MESH			0x30
 #define MIN_NET_DEVICE_FOR_DLS			0x40
-#define NET_DEVICE_REAL_IDX_MASK		0x0f		// for each operation mode, we maximum support 15 entities.
-
+#define NET_DEVICE_REAL_IDX_MASK		0x0f	// for each operation mode, we maximum support 15 entities.
 
 #define NDIS_PACKET_TYPE_DIRECTED		0
 #define NDIS_PACKET_TYPE_MULTICAST		1
@@ -197,36 +190,32 @@ struct iw_statistics *rt28xx_get_wireless_stats(
 #define NDIS_PACKET_TYPE_ALL_MULTICAST	3
 #define NDIS_PACKET_TYPE_PROMISCUOUS	4
 
-
 /***********************************************************************************
  *	OS signaling related constant definitions
  ***********************************************************************************/
 
-
 /***********************************************************************************
  *	OS file operation related data structure definitions
  ***********************************************************************************/
-typedef struct file* RTMP_OS_FD;
+typedef struct file *RTMP_OS_FD;
 
-typedef struct _RTMP_OS_FS_INFO_
-{
-	int				fsuid;
-	int				fsgid;
-	mm_segment_t	fs;
-}RTMP_OS_FS_INFO;
+typedef struct _RTMP_OS_FS_INFO_ {
+	int fsuid;
+	int fsgid;
+	mm_segment_t fs;
+} RTMP_OS_FS_INFO;
 
 #define IS_FILE_OPEN_ERR(_fd)	IS_ERR((_fd))
 
-
 /***********************************************************************************
  *	OS semaphore related data structure and definitions
  ***********************************************************************************/
-struct os_lock  {
-	spinlock_t		lock;
-	unsigned long	flags;
+struct os_lock {
+	spinlock_t lock;
+	unsigned long flags;
 };
 
-typedef spinlock_t			NDIS_SPIN_LOCK;
+typedef spinlock_t NDIS_SPIN_LOCK;
 
 //
 //  spin_lock enhanced for Nested spin lock
@@ -239,7 +228,6 @@ typedef spinlock_t			NDIS_SPIN_LOCK;
 #define NdisFreeSpinLock(lock)          \
 	do{}while(0)
 
-
 #define RTMP_SEM_LOCK(__lock)					\
 {												\
 	spin_lock_bh((spinlock_t *)(__lock));		\
@@ -250,7 +238,6 @@ typedef spinlock_t			NDIS_SPIN_LOCK;
 	spin_unlock_bh((spinlock_t *)(__lock));		\
 }
 
-
 // sample, use semaphore lock to replace IRQ lock, 2007/11/15
 #define RTMP_IRQ_LOCK(__lock, __irqflags)			\
 {													\
@@ -343,7 +330,7 @@ do { \
 /***********************************************************************************
  *	OS Memory Access related data structure and definitions
  ***********************************************************************************/
-#define MEM_ALLOC_FLAG      (GFP_ATOMIC) //(GFP_DMA | GFP_ATOMIC)
+#define MEM_ALLOC_FLAG      (GFP_ATOMIC)	//(GFP_DMA | GFP_ATOMIC)
 
 #define NdisMoveMemory(Destination, Source, Length) memmove(Destination, Source, Length)
 #define NdisCopyMemory(Destination, Source, Length) memcpy(Destination, Source, Length)
@@ -358,32 +345,29 @@ do { \
 
 #define COPY_MAC_ADDR(Addr1, Addr2)             memcpy((Addr1), (Addr2), MAC_ADDR_LEN)
 
-
 /***********************************************************************************
  *	OS task related data structure and definitions
  ***********************************************************************************/
 #define RTMP_OS_MGMT_TASK_FLAGS	CLONE_VM
 
-typedef	struct pid *	THREAD_PID;
+typedef struct pid *THREAD_PID;
 #define	THREAD_PID_INIT_VALUE	NULL
 #define	GET_PID(_v)	find_get_pid((_v))
 #define	GET_PID_NUMBER(_v)	pid_nr((_v))
 #define CHECK_PID_LEGALITY(_pid)	if (pid_nr((_pid)) > 0)
 #define KILL_THREAD_PID(_A, _B, _C)	kill_pid((_A), (_B), (_C))
 
-typedef struct tasklet_struct  RTMP_NET_TASK_STRUCT;
-typedef struct tasklet_struct  *PRTMP_NET_TASK_STRUCT;
-
+typedef struct tasklet_struct RTMP_NET_TASK_STRUCT;
+typedef struct tasklet_struct *PRTMP_NET_TASK_STRUCT;
 
 /***********************************************************************************
  * Timer related definitions and data structures.
  **********************************************************************************/
 #define OS_HZ			HZ
 
-typedef struct timer_list	NDIS_MINIPORT_TIMER;
-typedef struct timer_list	RTMP_OS_TIMER;
-typedef void (*TIMER_FUNCTION)(unsigned long);
-
+typedef struct timer_list NDIS_MINIPORT_TIMER;
+typedef struct timer_list RTMP_OS_TIMER;
+typedef void (*TIMER_FUNCTION) (unsigned long);
 
 #define OS_WAIT(_time) \
 {	int _i; \
@@ -406,26 +390,25 @@ typedef void (*TIMER_FUNCTION)(unsigned long);
 
 #define ONE_TICK 1
 
-static inline void NdisGetSystemUpTime(ULONG *time)
+static inline void NdisGetSystemUpTime(ULONG * time)
 {
 	*time = jiffies;
 }
 
-
 /***********************************************************************************
  *	OS specific cookie data structure binding to RTMP_ADAPTER
  ***********************************************************************************/
 
 struct os_cookie {
 #ifdef RTMP_MAC_PCI
-	struct pci_dev			*pci_dev;
-	struct pci_dev			*parent_pci_dev;
-	USHORT                  DeviceID;
-	dma_addr_t				pAd_pa;
-#endif // RTMP_MAC_PCI //
+	struct pci_dev *pci_dev;
+	struct pci_dev *parent_pci_dev;
+	USHORT DeviceID;
+	dma_addr_t pAd_pa;
+#endif				// RTMP_MAC_PCI //
 #ifdef RTMP_MAC_USB
-	struct usb_device		*pUsb_Dev;
-#endif // RTMP_MAC_USB //
+	struct usb_device *pUsb_Dev;
+#endif				// RTMP_MAC_USB //
 
 	RTMP_NET_TASK_STRUCT rx_done_task;
 	RTMP_NET_TASK_STRUCT mgmt_dma_done_task;
@@ -436,21 +419,19 @@ struct os_cookie {
 	RTMP_NET_TASK_STRUCT tbtt_task;
 #ifdef RTMP_MAC_PCI
 	RTMP_NET_TASK_STRUCT fifo_statistic_full_task;
-#endif // RTMP_MAC_PCI //
+#endif				// RTMP_MAC_PCI //
 #ifdef RTMP_MAC_USB
 	RTMP_NET_TASK_STRUCT null_frame_complete_task;
 	RTMP_NET_TASK_STRUCT rts_frame_complete_task;
 	RTMP_NET_TASK_STRUCT pspoll_frame_complete_task;
-#endif // RTMP_MAC_USB //
+#endif				// RTMP_MAC_USB //
 
-	unsigned long			apd_pid; //802.1x daemon pid
-	INT						ioctl_if_type;
-	INT					ioctl_if;
+	unsigned long apd_pid;	//802.1x daemon pid
+	INT ioctl_if_type;
+	INT ioctl_if;
 };
 
-typedef struct os_cookie	* POS_COOKIE;
-
-
+typedef struct os_cookie *POS_COOKIE;
 
 /***********************************************************************************
  *	OS debugging and printing related definitions and data structure
@@ -459,7 +440,7 @@ typedef struct os_cookie	* POS_COOKIE;
 	addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]
 
 #ifdef DBG
-extern ULONG    RTDebugLevel;
+extern ULONG RTDebugLevel;
 
 #define DBGPRINT_RAW(Level, Fmt)    \
 do{                                   \
@@ -471,7 +452,6 @@ do{                                   \
 
 #define DBGPRINT(Level, Fmt)    DBGPRINT_RAW(Level, Fmt)
 
-
 #define DBGPRINT_ERR(Fmt)           \
 {                                   \
     printk("ERROR!!! ");          \
@@ -483,7 +463,6 @@ do{                                   \
 	printk Fmt;					\
 }
 
-
 #else
 #define DBGPRINT(Level, Fmt)
 #define DBGPRINT_RAW(Level, Fmt)
@@ -495,18 +474,18 @@ do{                                   \
 
 void hex_dump(char *str, unsigned char *pSrcBufVA, unsigned int SrcBufLen);
 
-
 /*********************************************************************************************************
 	The following code are not revised, temporary put it here.
   *********************************************************************************************************/
 
-
 /***********************************************************************************
  * Device DMA Access related definitions and data structures.
  **********************************************************************************/
 #ifdef RTMP_MAC_PCI
-dma_addr_t linux_pci_map_single(void *handle, void *ptr, size_t size, int sd_idx, int direction);
-void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size, int direction);
+dma_addr_t linux_pci_map_single(void *handle, void *ptr, size_t size,
+				int sd_idx, int direction);
+void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size,
+			    int direction);
 
 #define PCI_MAP_SINGLE(_handle, _ptr, _size, _sd_idx, _dir) \
 	linux_pci_map_single(_handle, _ptr, _size, _sd_idx, _dir)
@@ -562,8 +541,6 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size, int
 
 #define NdisMIndicateStatus(_w, _x, _y, _z)
 
-
-
 /***********************************************************************************
  * Device Register I/O Access related definitions and data structures.
  **********************************************************************************/
@@ -729,7 +706,6 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size, int
 #define GET_OS_PKT_NEXT(_pkt) \
 		(RTPKT_TO_OSPKT(_pkt)->next)
 
-
 #define OS_PKT_CLONED(_pkt)		skb_cloned(RTPKT_TO_OSPKT(_pkt))
 
 #define OS_NTOHS(_Val) \
@@ -783,9 +759,8 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size, int
 #define RTMP_SET_PACKET_MOREDATA(_p, _morebit)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+7] = _morebit)
 #define RTMP_GET_PACKET_MOREDATA(_p)				(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+7])
 
-
 //
-//	Sepcific Pakcet Type definition
+//      Sepcific Pakcet Type definition
 //
 #define RTMP_PACKET_SPECIFIC_CB_OFFSET	11
 
@@ -863,13 +838,10 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size, int
 
 #define RTMP_GET_PACKET_IPV4(_p)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_IPV4)
 
-
 // If this flag is set, it indicates that this EAPoL frame MUST be clear.
 #define RTMP_SET_PACKET_CLEAR_EAP_FRAME(_p, _flg)   (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+12] = _flg)
 #define RTMP_GET_PACKET_CLEAR_EAP_FRAME(_p)         (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+12])
 
-
-
 /* use bit3 of cb[CB_OFF+16] */
 
 #define RTMP_SET_PACKET_5VT(_p, _flg)   (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+22] = _flg)
@@ -877,12 +849,10 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size, int
 
 /* Max skb->cb = 48B = [CB_OFF+38] */
 
-
-
 /***********************************************************************************
  *	Other function prototypes definitions
  ***********************************************************************************/
-void RTMP_GetCurrentSystemTime(LARGE_INTEGER *time);
+void RTMP_GetCurrentSystemTime(LARGE_INTEGER * time);
 int rt28xx_packet_xmit(struct sk_buff *skb);
 
 #ifdef RTMP_MAC_PCI
@@ -892,13 +862,10 @@ int rt28xx_packet_xmit(struct sk_buff *skb);
 IRQ_HANDLE_TYPE rt2860_interrupt(int irq, void *dev_instance);
 #endif // RTMP_MAC_PCI //
 
-INT rt28xx_sta_ioctl(
-	IN	PNET_DEV		net_dev,
-	IN	OUT	struct ifreq	*rq,
-	IN	INT			cmd);
+INT rt28xx_sta_ioctl(IN PNET_DEV net_dev, IN OUT struct ifreq *rq, IN INT cmd);
 
-extern int ra_mtd_write(int num, loff_t to, size_t len, const u_char *buf);
-extern int ra_mtd_read(int num, loff_t from, size_t len, u_char *buf);
+extern int ra_mtd_write(int num, loff_t to, size_t len, const u_char * buf);
+extern int ra_mtd_read(int num, loff_t from, size_t len, u_char * buf);
 
 #define GET_PAD_FROM_NET_DEV(_pAd, _net_dev)	(_pAd) = (PRTMP_ADAPTER)(_net_dev)->ml_priv;
 

drivers/staging/rt2860/rtmp_chip.h

@@ -73,7 +73,7 @@
 #define IS_RT2070(_pAd)		(((_pAd)->RfIcType == RFIC_2020) || ((_pAd)->EFuseTag == 0x27))
 
 #define IS_RT30xx(_pAd)		(((_pAd)->MACVersion & 0xfff00000) == 0x30700000||IS_RT3090A(_pAd))
-//#define IS_RT305X(_pAd)		((_pAd)->MACVersion == 0x28720200)
+//#define IS_RT305X(_pAd)               ((_pAd)->MACVersion == 0x28720200)
 
 /* RT3572, 3592, 3562, 3062 share the same MAC version */
 #define IS_RT3572(_pAd)		(((_pAd)->MACVersion & 0xffff0000) == 0x35720000)
@@ -103,15 +103,12 @@
 
 #define RETRY_LIMIT		10
 
-
-
 // ------------------------------------------------------
-// BBP & RF	definition
+// BBP & RF     definition
 // ------------------------------------------------------
 #define	BUSY		                1
 #define	IDLE		                0
 
-
 //-------------------------------------------------------------------------
 // EEPROM definition
 //-------------------------------------------------------------------------
@@ -126,11 +123,11 @@
 #define EEPROM_EWDS_OPCODE          0x10
 #define EEPROM_EWEN_OPCODE          0x13
 
-#define NUM_EEPROM_BBP_PARMS		19			// Include NIC Config 0, 1, CR, TX ALC step, BBPs
+#define NUM_EEPROM_BBP_PARMS		19	// Include NIC Config 0, 1, CR, TX ALC step, BBPs
 #define NUM_EEPROM_TX_G_PARMS		7
-#define EEPROM_NIC1_OFFSET          0x34		// The address is from NIC config 0, not BBP register ID
-#define EEPROM_NIC2_OFFSET          0x36		// The address is from NIC config 0, not BBP register ID
-#define EEPROM_BBP_BASE_OFFSET		0xf0		// The address is from NIC config 0, not BBP register ID
+#define EEPROM_NIC1_OFFSET          0x34	// The address is from NIC config 0, not BBP register ID
+#define EEPROM_NIC2_OFFSET          0x36	// The address is from NIC config 0, not BBP register ID
+#define EEPROM_BBP_BASE_OFFSET		0xf0	// The address is from NIC config 0, not BBP register ID
 #define EEPROM_G_TX_PWR_OFFSET		0x52
 #define EEPROM_G_TX2_PWR_OFFSET		0x60
 #define EEPROM_LED1_OFFSET			0x3c
@@ -150,24 +147,22 @@
 #define EEPROM_A_TX2_PWR_OFFSET      0xa6
 //#define EEPROM_Japan_TX_PWR_OFFSET      0x90 // 802.11j
 //#define EEPROM_Japan_TX2_PWR_OFFSET      0xbe
-//#define EEPROM_TSSI_REF_OFFSET	0x54
-//#define EEPROM_TSSI_DELTA_OFFSET	0x24
+//#define EEPROM_TSSI_REF_OFFSET        0x54
+//#define EEPROM_TSSI_DELTA_OFFSET      0x24
 //#define EEPROM_CCK_TX_PWR_OFFSET  0x62
-//#define EEPROM_CALIBRATE_OFFSET	0x7c
+//#define EEPROM_CALIBRATE_OFFSET       0x7c
 #define EEPROM_VERSION_OFFSET       0x02
 #define EEPROM_FREQ_OFFSET			0x3a
 #define EEPROM_TXPOWER_BYRATE	0xde	// 20MHZ power.
 #define EEPROM_TXPOWER_DELTA		0x50	// 20MHZ AND 40 MHZ use different power. This is delta in 40MHZ.
 #define VALID_EEPROM_VERSION        1
 
-
 /*
   *   EEPROM operation related marcos
   */
 #define RT28xx_EEPROM_READ16(_pAd, _offset, _value)			\
 	(_pAd)->chipOps.eeread((RTMP_ADAPTER *)(_pAd), (USHORT)(_offset), (PUSHORT)&(_value))
 
-
 // -------------------------------------------------------------------
 //  E2PROM data layout
 // -------------------------------------------------------------------
@@ -175,90 +170,89 @@
 //
 // MCU_LEDCS: MCU LED Control Setting.
 //
-typedef union  _MCU_LEDCS_STRUC {
-	struct	{
-		UCHAR		LedMode:7;
-		UCHAR		Polarity:1;
+typedef union _MCU_LEDCS_STRUC {
+	struct {
+		UCHAR LedMode:7;
+		UCHAR Polarity:1;
 	} field;
-	UCHAR				word;
+	UCHAR word;
 } MCU_LEDCS_STRUC, *PMCU_LEDCS_STRUC;
 
-
 //
 // EEPROM antenna select format
 //
-typedef	union	_EEPROM_ANTENNA_STRUC	{
-	struct	{
-		USHORT		RxPath:4;	// 1: 1R, 2: 2R, 3: 3R
-		USHORT		TxPath:4;	// 1: 1T, 2: 2T
-		USHORT      RfIcType:4;             // see E2PROM document
-		USHORT      Rsv:4;
-	}	field;
-	USHORT			word;
-}	EEPROM_ANTENNA_STRUC, *PEEPROM_ANTENNA_STRUC;
+typedef union _EEPROM_ANTENNA_STRUC {
+	struct {
+		USHORT RxPath:4;	// 1: 1R, 2: 2R, 3: 3R
+		USHORT TxPath:4;	// 1: 1T, 2: 2T
+		USHORT RfIcType:4;	// see E2PROM document
+		USHORT Rsv:4;
+	} field;
+	USHORT word;
+} EEPROM_ANTENNA_STRUC, *PEEPROM_ANTENNA_STRUC;
 
-typedef	union _EEPROM_NIC_CINFIG2_STRUC	{
+typedef union _EEPROM_NIC_CINFIG2_STRUC {
 	struct {
-		USHORT		HardwareRadioControl:1;	// 1:enable, 0:disable
-		USHORT		DynamicTxAgcControl:1;			//
-		USHORT		ExternalLNAForG:1;				//
-		USHORT		ExternalLNAForA:1;			// external LNA enable for 2.4G
-		USHORT		CardbusAcceleration:1;	// !!! NOTE: 0 - enable, 1 - disable
-		USHORT		BW40MSidebandForG:1;
-		USHORT		BW40MSidebandForA:1;
-		USHORT		EnableWPSPBC:1;                 // WPS PBC Control bit
-		USHORT		BW40MAvailForG:1;			// 0:enable, 1:disable
-		USHORT		BW40MAvailForA:1;			// 0:enable, 1:disable
-		USHORT		Rsv1:1;					// must be 0
-		USHORT		AntDiversity:1;			// Antenna diversity
-		USHORT		Rsv2:3;					// must be 0
-		USHORT		DACTestBit:1;			// control if driver should patch the DAC issue
-	}	field;
-	USHORT			word;
-}	EEPROM_NIC_CONFIG2_STRUC, *PEEPROM_NIC_CONFIG2_STRUC;
+		USHORT HardwareRadioControl:1;	// 1:enable, 0:disable
+		USHORT DynamicTxAgcControl:1;	//
+		USHORT ExternalLNAForG:1;	//
+		USHORT ExternalLNAForA:1;	// external LNA enable for 2.4G
+		USHORT CardbusAcceleration:1;	// !!! NOTE: 0 - enable, 1 - disable
+		USHORT BW40MSidebandForG:1;
+		USHORT BW40MSidebandForA:1;
+		USHORT EnableWPSPBC:1;	// WPS PBC Control bit
+		USHORT BW40MAvailForG:1;	// 0:enable, 1:disable
+		USHORT BW40MAvailForA:1;	// 0:enable, 1:disable
+		USHORT Rsv1:1;	// must be 0
+		USHORT AntDiversity:1;	// Antenna diversity
+		USHORT Rsv2:3;	// must be 0
+		USHORT DACTestBit:1;	// control if driver should patch the DAC issue
+	} field;
+	USHORT word;
+} EEPROM_NIC_CONFIG2_STRUC, *PEEPROM_NIC_CONFIG2_STRUC;
 
 //
 // TX_PWR Value valid range 0xFA(-6) ~ 0x24(36)
 //
-typedef	union	_EEPROM_TX_PWR_STRUC	{
-	struct	{
-		CHAR	Byte0;				// Low Byte
-		CHAR	Byte1;				// High Byte
-	}	field;
-	USHORT	word;
-}	EEPROM_TX_PWR_STRUC, *PEEPROM_TX_PWR_STRUC;
+typedef union _EEPROM_TX_PWR_STRUC {
+	struct {
+		CHAR Byte0;	// Low Byte
+		CHAR Byte1;	// High Byte
+	} field;
+	USHORT word;
+} EEPROM_TX_PWR_STRUC, *PEEPROM_TX_PWR_STRUC;
 
-typedef	union	_EEPROM_VERSION_STRUC	{
-	struct	{
-		UCHAR	FaeReleaseNumber;	// Low Byte
-		UCHAR	Version;			// High Byte
-	}	field;
-	USHORT	word;
-}	EEPROM_VERSION_STRUC, *PEEPROM_VERSION_STRUC;
+typedef union _EEPROM_VERSION_STRUC {
+	struct {
+		UCHAR FaeReleaseNumber;	// Low Byte
+		UCHAR Version;	// High Byte
+	} field;
+	USHORT word;
+} EEPROM_VERSION_STRUC, *PEEPROM_VERSION_STRUC;
 
-typedef	union	_EEPROM_LED_STRUC	{
-	struct	{
-		USHORT	PolarityRDY_G:1;		// Polarity RDY_G setting.
-		USHORT	PolarityRDY_A:1;		// Polarity RDY_A setting.
-		USHORT	PolarityACT:1;		// Polarity ACT setting.
-		USHORT	PolarityGPIO_0:1;	// Polarity GPIO#0 setting.
-		USHORT	PolarityGPIO_1:1;	// Polarity GPIO#1 setting.
-		USHORT	PolarityGPIO_2:1;	// Polarity GPIO#2 setting.
-		USHORT	PolarityGPIO_3:1;	// Polarity GPIO#3 setting.
-		USHORT	PolarityGPIO_4:1;	// Polarity GPIO#4 setting.
-		USHORT	LedMode:5;			// Led mode.
-		USHORT	Rsvd:3;				// Reserved
-	}	field;
-	USHORT	word;
-}	EEPROM_LED_STRUC, *PEEPROM_LED_STRUC;
+typedef union _EEPROM_LED_STRUC {
+	struct {
+		USHORT PolarityRDY_G:1;	// Polarity RDY_G setting.
+		USHORT PolarityRDY_A:1;	// Polarity RDY_A setting.
+		USHORT PolarityACT:1;	// Polarity ACT setting.
+		USHORT PolarityGPIO_0:1;	// Polarity GPIO#0 setting.
+		USHORT PolarityGPIO_1:1;	// Polarity GPIO#1 setting.
+		USHORT PolarityGPIO_2:1;	// Polarity GPIO#2 setting.
+		USHORT PolarityGPIO_3:1;	// Polarity GPIO#3 setting.
+		USHORT PolarityGPIO_4:1;	// Polarity GPIO#4 setting.
+		USHORT LedMode:5;	// Led mode.
+		USHORT Rsvd:3;	// Reserved
+	} field;
+	USHORT word;
+} EEPROM_LED_STRUC, *PEEPROM_LED_STRUC;
 
-typedef	union	_EEPROM_TXPOWER_DELTA_STRUC	{
-	struct	{
-		UCHAR	DeltaValue:6;	// Tx Power dalta value (MAX=4)
-		UCHAR	Type:1;			// 1: plus the delta value, 0: minus the delta value
-		UCHAR	TxPowerEnable:1;// Enable
-	}	field;
-	UCHAR	value;
-}	EEPROM_TXPOWER_DELTA_STRUC, *PEEPROM_TXPOWER_DELTA_STRUC;
+typedef union _EEPROM_TXPOWER_DELTA_STRUC {
+	struct {
+		UCHAR DeltaValue:6;	// Tx Power dalta value (MAX=4)
+		UCHAR Type:1;	// 1: plus the delta value, 0: minus the delta value
+		UCHAR TxPowerEnable:1;	// Enable
+	} field;
+	UCHAR value;
+} EEPROM_TXPOWER_DELTA_STRUC, *PEEPROM_TXPOWER_DELTA_STRUC;
 
-#endif	// __RTMP_CHIP_H__ //
+#endif // __RTMP_CHIP_H__ //

drivers/staging/rt2860/rtmp_ckipmic.h

@@ -37,42 +37,27 @@
 #ifndef	__RTMP_CKIPMIC_H__
 #define	__RTMP_CKIPMIC_H__
 
-typedef	struct	_MIC_CONTEXT	{
+typedef struct _MIC_CONTEXT {
 	/* --- MMH context                            */
-	UCHAR		CK[16];				/* the key                                    */
-	UCHAR		coefficient[16];	/* current aes counter mode coefficients      */
-	ULONGLONG	accum;				/* accumulated mic, reduced to u32 in final() */
-	UINT		position;			/* current position (byte offset) in message  */
-	UCHAR		part[4];			/* for conversion of message to u32 for mmh   */
-}	MIC_CONTEXT, *PMIC_CONTEXT;
+	UCHAR CK[16];		/* the key                                    */
+	UCHAR coefficient[16];	/* current aes counter mode coefficients      */
+	ULONGLONG accum;	/* accumulated mic, reduced to u32 in final() */
+	UINT position;		/* current position (byte offset) in message  */
+	UCHAR part[4];		/* for conversion of message to u32 for mmh   */
+} MIC_CONTEXT, *PMIC_CONTEXT;
 
-VOID xor_128(
-    IN  PUCHAR              a,
-    IN  PUCHAR              b,
-    OUT PUCHAR              out);
+VOID xor_128(IN PUCHAR a, IN PUCHAR b, OUT PUCHAR out);
 
-UCHAR RTMPCkipSbox(
-    IN  UCHAR               a);
+UCHAR RTMPCkipSbox(IN UCHAR a);
 
-VOID xor_32(
-    IN  PUCHAR              a,
-    IN  PUCHAR              b,
-    OUT PUCHAR              out);
+VOID xor_32(IN PUCHAR a, IN PUCHAR b, OUT PUCHAR out);
 
-VOID next_key(
-    IN  PUCHAR              key,
-    IN  INT                 round);
+VOID next_key(IN PUCHAR key, IN INT round);
 
-VOID byte_sub(
-    IN  PUCHAR              in,
-    OUT PUCHAR              out);
+VOID byte_sub(IN PUCHAR in, OUT PUCHAR out);
 
-VOID shift_row(
-    IN  PUCHAR              in,
-    OUT PUCHAR              out);
+VOID shift_row(IN PUCHAR in, OUT PUCHAR out);
 
-VOID mix_column(
-    IN  PUCHAR              in,
-    OUT PUCHAR              out);
+VOID mix_column(IN PUCHAR in, OUT PUCHAR out);
 
 #endif //__RTMP_CKIPMIC_H__

drivers/staging/rt2860/rtmp_def.h

@@ -55,9 +55,9 @@
 #define NIC_DBG_STRING      ("**RT28xx**")
 
 #ifdef RTMP_MAC_USB
-#define TX_RING_SIZE            8 // 1
+#define TX_RING_SIZE            8	// 1
 #define PRIO_RING_SIZE          8
-#define MGMT_RING_SIZE		32 // PRIO_RING_SIZE
+#define MGMT_RING_SIZE		32	// PRIO_RING_SIZE
 #define RX_RING_SIZE            8
 #define MAX_TX_PROCESS          4
 #define LOCAL_TXBUF_SIZE        2048
@@ -76,29 +76,29 @@
 //
 
 #ifdef RTMP_MAC_PCI
-#define TX_RING_SIZE            64 //64
+#define TX_RING_SIZE            64	//64
 #define MGMT_RING_SIZE          128
-#define RX_RING_SIZE            128 //64
-#define MAX_TX_PROCESS          TX_RING_SIZE //8
+#define RX_RING_SIZE            128	//64
+#define MAX_TX_PROCESS          TX_RING_SIZE	//8
 #define MAX_DMA_DONE_PROCESS    TX_RING_SIZE
-#define MAX_TX_DONE_PROCESS     TX_RING_SIZE //8
+#define MAX_TX_DONE_PROCESS     TX_RING_SIZE	//8
 #define LOCAL_TXBUF_SIZE        2
 #endif // RTMP_MAC_PCI //
 
-#define MAX_RX_PROCESS          128 //64 //32
+#define MAX_RX_PROCESS          128	//64 //32
 #define NUM_OF_LOCAL_TXBUF      2
 #define TXD_SIZE                16
 #define TXWI_SIZE               16
 #define RXD_SIZE               	16
 #define RXWI_SIZE             	16
 // TXINFO_SIZE + TXWI_SIZE + 802.11 Header Size + AMSDU sub frame header
-#define TX_DMA_1ST_BUFFER_SIZE  96    // only the 1st physical buffer is pre-allocated
-#define MGMT_DMA_BUFFER_SIZE    1536 //2048
-#define RX_BUFFER_AGGRESIZE     3840 //3904 //3968 //4096 //2048 //4096
-#define RX_BUFFER_NORMSIZE      3840 //3904 //3968 //4096 //2048 //4096
+#define TX_DMA_1ST_BUFFER_SIZE  96	// only the 1st physical buffer is pre-allocated
+#define MGMT_DMA_BUFFER_SIZE    1536	//2048
+#define RX_BUFFER_AGGRESIZE     3840	//3904 //3968 //4096 //2048 //4096
+#define RX_BUFFER_NORMSIZE      3840	//3904 //3968 //4096 //2048 //4096
 #define TX_BUFFER_NORMSIZE		RX_BUFFER_NORMSIZE
-#define MAX_FRAME_SIZE          2346                    // Maximum 802.11 frame size
-#define MAX_AGGREGATION_SIZE    3840 //3904 //3968 //4096
+#define MAX_FRAME_SIZE          2346	// Maximum 802.11 frame size
+#define MAX_AGGREGATION_SIZE    3840	//3904 //3968 //4096
 #define MAX_NUM_OF_TUPLE_CACHE  2
 #define MAX_MCAST_LIST_SIZE     32
 #define MAX_LEN_OF_VENDOR_DESC  64
@@ -107,7 +107,6 @@
 
 #define MAX_RX_PROCESS_CNT	(RX_RING_SIZE)
 
-
 /*
 	WMM Note: If memory of your system is not much, please reduce the definition;
 	or when you do WMM test, the queue for low priority AC will be full, i.e.
@@ -127,12 +126,11 @@
 	clConfig.clNum = RX_RING_SIZE * 4;
 */
 // TODO: For VxWorks the size is 256. Shall we cahnge the value as 256 for all OS?????
-#define MAX_PACKETS_IN_QUEUE				(512) //(512)    // to pass WMM A5-WPAPSK
+#define MAX_PACKETS_IN_QUEUE				(512)	//(512)    // to pass WMM A5-WPAPSK
 
 #define MAX_PACKETS_IN_MCAST_PS_QUEUE		32
 #define MAX_PACKETS_IN_PS_QUEUE				128	//32
-#define WMM_NUM_OF_AC                       4  /* AC0, AC1, AC2, and AC3 */
-
+#define WMM_NUM_OF_AC                       4	/* AC0, AC1, AC2, and AC3 */
 
 #ifdef RTMP_EFUSE_SUPPORT
 //2008/09/11:KH add to support efuse<--
@@ -189,8 +187,8 @@
 #define fOP_STATUS_MEDIA_STATE_CONNECTED    0x00000080
 #define fOP_STATUS_WMM_INUSED               0x00000100
 #define fOP_STATUS_AGGREGATION_INUSED       0x00000200
-#define fOP_STATUS_DOZE                     0x00000400  // debug purpose
-#define fOP_STATUS_PIGGYBACK_INUSED         0x00000800  // piggy-back, and aggregation
+#define fOP_STATUS_DOZE                     0x00000400	// debug purpose
+#define fOP_STATUS_PIGGYBACK_INUSED         0x00000800	// piggy-back, and aggregation
 #define fOP_STATUS_APSD_INUSED				0x00001000
 #define fOP_STATUS_TX_AMSDU_INUSED			0x00002000
 #define fOP_STATUS_MAX_RETRY_ENABLED		0x00004000
@@ -229,9 +227,9 @@
 //
 //  AP's client table operation status flags
 //
-#define fCLIENT_STATUS_WMM_CAPABLE          0x00000001  // CLIENT can parse QOS DATA frame
-#define fCLIENT_STATUS_AGGREGATION_CAPABLE  0x00000002  // CLIENT can receive Ralink's proprietary TX aggregation frame
-#define fCLIENT_STATUS_PIGGYBACK_CAPABLE    0x00000004  // CLIENT support piggy-back
+#define fCLIENT_STATUS_WMM_CAPABLE          0x00000001	// CLIENT can parse QOS DATA frame
+#define fCLIENT_STATUS_AGGREGATION_CAPABLE  0x00000002	// CLIENT can receive Ralink's proprietary TX aggregation frame
+#define fCLIENT_STATUS_PIGGYBACK_CAPABLE    0x00000004	// CLIENT support piggy-back
 #define fCLIENT_STATUS_AMSDU_INUSED			0x00000008
 #define fCLIENT_STATUS_SGI20_CAPABLE		0x00000010
 #define fCLIENT_STATUS_SGI40_CAPABLE		0x00000020
@@ -240,7 +238,7 @@
 #define fCLIENT_STATUS_HTC_CAPABLE			0x00000100
 #define fCLIENT_STATUS_RDG_CAPABLE			0x00000200
 #define fCLIENT_STATUS_MCSFEEDBACK_CAPABLE  0x00000400
-#define fCLIENT_STATUS_APSD_CAPABLE         0x00000800  /* UAPSD STATION */
+#define fCLIENT_STATUS_APSD_CAPABLE         0x00000800	/* UAPSD STATION */
 
 #define fCLIENT_STATUS_RALINK_CHIPSET		0x00100000
 //
@@ -303,10 +301,9 @@
 #define ERRLOG_NO_INTERRUPT_RESOURCE    0x00000604L
 #define ERRLOG_NO_MEMORY_RESOURCE       0x00000605L
 
-
 // WDS definition
 #define	MAX_WDS_ENTRY               4
-#define WDS_PAIRWISE_KEY_OFFSET     60    // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table
+#define WDS_PAIRWISE_KEY_OFFSET     60	// WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table
 
 #define	WDS_DISABLE_MODE            0
 #define	WDS_RESTRICT_MODE           1
@@ -314,7 +311,6 @@
 #define	WDS_REPEATER_MODE           3
 #define	WDS_LAZY_MODE               4
 
-
 #define MAX_MESH_NUM				0
 
 #define MAX_APCLI_NUM				0
@@ -336,12 +332,11 @@
 #define MAIN_MBSSID                 0
 #define FIRST_MBSSID                1
 
-
 #define MAX_BEACON_SIZE				512
 // If the MAX_MBSSID_NUM is larger than 6,
 // it shall reserve some WCID space(wcid 222~253) for beacon frames.
-// -	these wcid 238~253 are reserved for beacon#6(ra6).
-// -	these wcid 222~237 are reserved for beacon#7(ra7).
+// -    these wcid 238~253 are reserved for beacon#6(ra6).
+// -    these wcid 222~237 are reserved for beacon#7(ra7).
 #if defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 8)
 #define HW_RESERVED_WCID	222
 #elif defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 7)
@@ -368,7 +363,6 @@
 
 #define IsGroupKeyWCID(__wcid) (((__wcid) < LAST_SPECIFIC_WCID) && ((__wcid) >= (LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM))))
 
-
 // definition to support multiple BSSID
 #define BSS0                            0
 #define BSS1                            1
@@ -379,20 +373,19 @@
 #define BSS6                            6
 #define BSS7                            7
 
-
 //============================================================
 // Length definitions
 #define PEER_KEY_NO                     2
 #define MAC_ADDR_LEN                    6
 #define TIMESTAMP_LEN                   8
-#define MAX_LEN_OF_SUPPORTED_RATES      MAX_LENGTH_OF_SUPPORT_RATES // 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
-#define MAX_LEN_OF_KEY                  32      // 32 octets == 256 bits, Redefine for WPA
-#define MAX_NUM_OF_CHANNELS             MAX_NUM_OF_CHS      // 14 channels @2.4G +  12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination
-#define MAX_NUM_OF_11JCHANNELS             20      // 14 channels @2.4G +  12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination
+#define MAX_LEN_OF_SUPPORTED_RATES      MAX_LENGTH_OF_SUPPORT_RATES	// 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
+#define MAX_LEN_OF_KEY                  32	// 32 octets == 256 bits, Redefine for WPA
+#define MAX_NUM_OF_CHANNELS             MAX_NUM_OF_CHS	// 14 channels @2.4G +  12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination
+#define MAX_NUM_OF_11JCHANNELS             20	// 14 channels @2.4G +  12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination
 #define MAX_LEN_OF_SSID                 32
 #define CIPHER_TEXT_LEN                 128
 #define HASH_TABLE_SIZE                 256
-#define MAX_VIE_LEN                     1024   // New for WPA cipher suite variable IE sizes.
+#define MAX_VIE_LEN                     1024	// New for WPA cipher suite variable IE sizes.
 #define MAX_SUPPORT_MCS             32
 #define MAX_NUM_OF_BBP_LATCH             140
 
@@ -413,7 +406,7 @@
 
 #define MAX_NUM_OF_ACL_LIST				MAX_NUMBER_OF_ACL
 
-#define MAX_LEN_OF_MAC_TABLE            MAX_NUMBER_OF_MAC // if MAX_MBSSID_NUM is 8, this value can't be larger than 211
+#define MAX_LEN_OF_MAC_TABLE            MAX_NUMBER_OF_MAC	// if MAX_MBSSID_NUM is 8, this value can't be larger than 211
 
 #if MAX_LEN_OF_MAC_TABLE>MAX_AVAILABLE_CLIENT_WCID
 #error MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID!!!!
@@ -426,37 +419,36 @@
 
 #define NUM_OF_TID			8
 #define MAX_AID_BA                    4
-#define MAX_LEN_OF_BA_REC_TABLE          ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)//   (NUM_OF_TID*MAX_AID_BA + 32)	 //Block ACK recipient
-#define MAX_LEN_OF_BA_ORI_TABLE          ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)//   (NUM_OF_TID*MAX_AID_BA + 32)   // Block ACK originator
+#define MAX_LEN_OF_BA_REC_TABLE          ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)	//   (NUM_OF_TID*MAX_AID_BA + 32)        //Block ACK recipient
+#define MAX_LEN_OF_BA_ORI_TABLE          ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)	//   (NUM_OF_TID*MAX_AID_BA + 32)   // Block ACK originator
 #define MAX_LEN_OF_BSS_TABLE             64
 #define MAX_REORDERING_MPDU_NUM			 512
 
 // key related definitions
 #define SHARE_KEY_NUM                   4
-#define MAX_LEN_OF_SHARE_KEY            16    // byte count
-#define MAX_LEN_OF_PEER_KEY             16    // byte count
-#define PAIRWISE_KEY_NUM                64    // in MAC ASIC pairwise key table
+#define MAX_LEN_OF_SHARE_KEY            16	// byte count
+#define MAX_LEN_OF_PEER_KEY             16	// byte count
+#define PAIRWISE_KEY_NUM                64	// in MAC ASIC pairwise key table
 #define GROUP_KEY_NUM                   4
 #define PMK_LEN                         32
-#define WDS_PAIRWISE_KEY_OFFSET         60    // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table
-#define	PMKID_NO                        4     // Number of PMKID saved supported
+#define WDS_PAIRWISE_KEY_OFFSET         60	// WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table
+#define	PMKID_NO                        4	// Number of PMKID saved supported
 #define MAX_LEN_OF_MLME_BUFFER          2048
 
 // power status related definitions
 #define PWR_ACTIVE                      0
 #define PWR_SAVE                        1
-#define PWR_MMPS                        2			//MIMO power save
+#define PWR_MMPS                        2	//MIMO power save
 
 // Auth and Assoc mode related definitions
 #define AUTH_MODE_OPEN                  0x00
 #define AUTH_MODE_KEY                   0x01
 
 // BSS Type definitions
-#define BSS_ADHOC                       0  // = Ndis802_11IBSS
-#define BSS_INFRA                       1  // = Ndis802_11Infrastructure
-#define BSS_ANY                         2  // = Ndis802_11AutoUnknown
-#define BSS_MONITOR			            3  // = Ndis802_11Monitor
-
+#define BSS_ADHOC                       0	// = Ndis802_11IBSS
+#define BSS_INFRA                       1	// = Ndis802_11Infrastructure
+#define BSS_ANY                         2	// = Ndis802_11AutoUnknown
+#define BSS_MONITOR			            3	// = Ndis802_11Monitor
 
 // Reason code definitions
 #define REASON_RESERVED                 0
@@ -533,65 +525,63 @@
 #define IE_CF_PARM                      4
 #define IE_TIM                          5
 #define IE_IBSS_PARM                    6
-#define IE_COUNTRY                      7     // 802.11d
-#define IE_802_11D_REQUEST              10    // 802.11d
-#define IE_QBSS_LOAD                    11    // 802.11e d9
-#define IE_EDCA_PARAMETER               12    // 802.11e d9
-#define IE_TSPEC                        13    // 802.11e d9
-#define IE_TCLAS                        14    // 802.11e d9
-#define IE_SCHEDULE                     15    // 802.11e d9
+#define IE_COUNTRY                      7	// 802.11d
+#define IE_802_11D_REQUEST              10	// 802.11d
+#define IE_QBSS_LOAD                    11	// 802.11e d9
+#define IE_EDCA_PARAMETER               12	// 802.11e d9
+#define IE_TSPEC                        13	// 802.11e d9
+#define IE_TCLAS                        14	// 802.11e d9
+#define IE_SCHEDULE                     15	// 802.11e d9
 #define IE_CHALLENGE_TEXT               16
-#define IE_POWER_CONSTRAINT             32    // 802.11h d3.3
-#define IE_POWER_CAPABILITY             33    // 802.11h d3.3
-#define IE_TPC_REQUEST                  34    // 802.11h d3.3
-#define IE_TPC_REPORT                   35    // 802.11h d3.3
-#define IE_SUPP_CHANNELS                36    // 802.11h d3.3
-#define IE_CHANNEL_SWITCH_ANNOUNCEMENT  37    // 802.11h d3.3
-#define IE_MEASUREMENT_REQUEST          38    // 802.11h d3.3
-#define IE_MEASUREMENT_REPORT           39    // 802.11h d3.3
-#define IE_QUIET                        40    // 802.11h d3.3
-#define IE_IBSS_DFS                     41    // 802.11h d3.3
-#define IE_ERP                          42    // 802.11g
-#define IE_TS_DELAY                     43    // 802.11e d9
-#define IE_TCLAS_PROCESSING             44    // 802.11e d9
-#define IE_QOS_CAPABILITY               46    // 802.11e d6
-#define IE_HT_CAP                       45    // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD
-#define IE_AP_CHANNEL_REPORT			51    // 802.11k d6
-#define IE_HT_CAP2                         52    // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD
-#define IE_RSN                          48    // 802.11i d3.0
-#define IE_WPA2                         48    // WPA2
-#define IE_EXT_SUPP_RATES               50    // 802.11g
-#define IE_SUPP_REG_CLASS               59    // 802.11y. Supported regulatory classes.
+#define IE_POWER_CONSTRAINT             32	// 802.11h d3.3
+#define IE_POWER_CAPABILITY             33	// 802.11h d3.3
+#define IE_TPC_REQUEST                  34	// 802.11h d3.3
+#define IE_TPC_REPORT                   35	// 802.11h d3.3
+#define IE_SUPP_CHANNELS                36	// 802.11h d3.3
+#define IE_CHANNEL_SWITCH_ANNOUNCEMENT  37	// 802.11h d3.3
+#define IE_MEASUREMENT_REQUEST          38	// 802.11h d3.3
+#define IE_MEASUREMENT_REPORT           39	// 802.11h d3.3
+#define IE_QUIET                        40	// 802.11h d3.3
+#define IE_IBSS_DFS                     41	// 802.11h d3.3
+#define IE_ERP                          42	// 802.11g
+#define IE_TS_DELAY                     43	// 802.11e d9
+#define IE_TCLAS_PROCESSING             44	// 802.11e d9
+#define IE_QOS_CAPABILITY               46	// 802.11e d6
+#define IE_HT_CAP                       45	// 802.11n d1. HT CAPABILITY. ELEMENT ID TBD
+#define IE_AP_CHANNEL_REPORT			51	// 802.11k d6
+#define IE_HT_CAP2                         52	// 802.11n d1. HT CAPABILITY. ELEMENT ID TBD
+#define IE_RSN                          48	// 802.11i d3.0
+#define IE_WPA2                         48	// WPA2
+#define IE_EXT_SUPP_RATES               50	// 802.11g
+#define IE_SUPP_REG_CLASS               59	// 802.11y. Supported regulatory classes.
 #define IE_EXT_CHANNEL_SWITCH_ANNOUNCEMENT	60	// 802.11n
-#define IE_ADD_HT                         61    // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD
-#define IE_ADD_HT2                        53    // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD
-
+#define IE_ADD_HT                         61	// 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD
+#define IE_ADD_HT2                        53	// 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD
 
 // For 802.11n D3.03
 //#define IE_NEW_EXT_CHA_OFFSET             62    // 802.11n d1. New extension channel offset elemet
-#define IE_SECONDARY_CH_OFFSET		62	// 802.11n D3.03	Secondary Channel Offset element
-#define IE_WAPI							68		// WAPI information element
-#define IE_2040_BSS_COEXIST               72    // 802.11n D3.0.3
-#define IE_2040_BSS_INTOLERANT_REPORT     73    // 802.11n D3.03
-#define IE_OVERLAPBSS_SCAN_PARM           74    // 802.11n D3.03
-#define IE_EXT_CAPABILITY                127   // 802.11n D3.03
-
+#define IE_SECONDARY_CH_OFFSET		62	// 802.11n D3.03        Secondary Channel Offset element
+#define IE_WAPI							68	// WAPI information element
+#define IE_2040_BSS_COEXIST               72	// 802.11n D3.0.3
+#define IE_2040_BSS_INTOLERANT_REPORT     73	// 802.11n D3.03
+#define IE_OVERLAPBSS_SCAN_PARM           74	// 802.11n D3.03
+#define IE_EXT_CAPABILITY                127	// 802.11n D3.03
 
-#define IE_WPA                          221   // WPA
-#define IE_VENDOR_SPECIFIC              221   // Wifi WMM (WME)
+#define IE_WPA                          221	// WPA
+#define IE_VENDOR_SPECIFIC              221	// Wifi WMM (WME)
 
-#define OUI_BROADCOM_HT              51   //
-#define OUI_BROADCOM_HTADD              52   //
-#define OUI_PREN_HT_CAP              51   //
-#define OUI_PREN_ADD_HT              52   //
+#define OUI_BROADCOM_HT              51	//
+#define OUI_BROADCOM_HTADD              52	//
+#define OUI_PREN_HT_CAP              51	//
+#define OUI_PREN_ADD_HT              52	//
 
 // CCX information
-#define IE_AIRONET_CKIP                 133   // CCX1.0 ID 85H for CKIP
-#define IE_AP_TX_POWER                  150   // CCX 2.0 for AP transmit power
-#define IE_MEASUREMENT_CAPABILITY       221   // CCX 2.0
+#define IE_AIRONET_CKIP                 133	// CCX1.0 ID 85H for CKIP
+#define IE_AP_TX_POWER                  150	// CCX 2.0 for AP transmit power
+#define IE_MEASUREMENT_CAPABILITY       221	// CCX 2.0
 #define IE_CCX_V2                       221
-#define IE_AIRONET_IPADDRESS            149   // CCX ID 95H for IP Address
-#define IE_AIRONET_CCKMREASSOC          156   // CCX ID 9CH for CCKM Reassociation Request element
+#define IE_AIRONET_IPADDRESS            149	// CCX ID 95H for IP Address
+#define IE_AIRONET_CCKMREASSOC          156	// CCX ID 9CH for CCKM Reassociation Request element
 #define CKIP_NEGOTIATION_LENGTH         30
 #define AIRONET_IPADDRESS_LENGTH        10
 #define AIRONET_CCKMREASSOC_LENGTH      24
@@ -619,11 +609,8 @@
 #define WSC_STATE_MACHINE            17
 #define WSC_UPNP_STATE_MACHINE		    18
 
-
 #define WPA_STATE_MACHINE			23
 
-
-
 //
 // STA's CONTROL/CONNECT state machine: states, events, total function #
 //
@@ -700,10 +687,9 @@
 #define MT2_PEER_PUBLIC_CATE             4
 #define MT2_PEER_RM_CATE             5
 /* "FT_CATEGORY_BSS_TRANSITION equal to 6" is defined file of "dot11r_ft.h" */
-#define MT2_PEER_HT_CATE             7	//	7.4.7
+#define MT2_PEER_HT_CATE             7	//      7.4.7
 #define MAX_PEER_CATE_MSG                   7
 
-
 #define MT2_MLME_ADD_BA_CATE             8
 #define MT2_MLME_ORI_DELBA_CATE             9
 #define MT2_MLME_REC_DELBA_CATE             10
@@ -721,7 +707,6 @@
 #define CATEGORY_RM			5
 #define CATEGORY_HT			7
 
-
 // DLS Action frame definition
 #define ACTION_DLS_REQUEST			0
 #define ACTION_DLS_RESPONSE			1
@@ -734,7 +719,6 @@
 #define SPEC_TPCRP	3
 #define SPEC_CHANNEL_SWITCH	4
 
-
 //BA  Action field value
 #define ADDBA_REQ	0
 #define ADDBA_RESP	1
@@ -748,10 +732,9 @@
 #define ACTION_EXT_CH_SWITCH_ANNOUNCE		4	// 11y D9.0
 #define ACTION_DSE_MEASUREMENT_REQ			5	// 11y D9.0
 #define ACTION_DSE_MEASUREMENT_REPORT		6	// 11y D9.0
-#define ACTION_MEASUREMENT_PILOT_ACTION		7  	// 11y D9.0
+#define ACTION_MEASUREMENT_PILOT_ACTION		7	// 11y D9.0
 #define ACTION_DSE_POWER_CONSTRAINT			8	// 11y D9.0
 
-
 //HT  Action field value
 #define NOTIFY_BW_ACTION				0
 #define SMPS_ACTION						1
@@ -798,7 +781,7 @@
 //
 // STA's SYNC state machine: states, events, total function #
 //
-#define SYNC_IDLE                       0  // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state
+#define SYNC_IDLE                       0	// merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state
 #define JOIN_WAIT_BEACON                1
 #define SCAN_LISTEN                     2
 #define MAX_SYNC_STATE                  3
@@ -907,8 +890,6 @@
 
 #define WPA_FUNC_SIZE                (MAX_WPA_PTK_STATE * MAX_WPA_MSG)
 
-
-
 // =============================================================================
 
 // value domain of 802.11 header FC.Tyte, which is b3..b2 of the 1st-byte of MAC header
@@ -961,10 +942,10 @@
 #define SUBTYPE_QOS_CFACK_CFPOLL    15
 
 // ACK policy of QOS Control field bit 6:5
-#define NORMAL_ACK                  0x00  // b6:5 = 00
-#define NO_ACK                      0x20  // b6:5 = 01
-#define NO_EXPLICIT_ACK             0x40  // b6:5 = 10
-#define BLOCK_ACK                   0x60  // b6:5 = 11
+#define NORMAL_ACK                  0x00	// b6:5 = 00
+#define NO_ACK                      0x20	// b6:5 = 01
+#define NO_EXPLICIT_ACK             0x40	// b6:5 = 10
+#define BLOCK_ACK                   0x60	// b6:5 = 11
 
 //
 // rtmp_data.c use these definition
@@ -982,7 +963,7 @@
 #define LENGTH_CRC                  4
 #define MAX_SEQ_NUMBER              0x0fff
 #define LENGTH_802_3_NO_TYPE		12
-#define LENGTH_802_1Q				4 /* VLAN related */
+#define LENGTH_802_1Q				4	/* VLAN related */
 
 // STA_CSR4.field.TxResult
 #define TX_RESULT_SUCCESS           0
@@ -999,23 +980,23 @@
 #define MODE_HTGREENFIELD	3
 
 // MCS for CCK.  BW.SGI.STBC are reserved
-#define MCS_LONGP_RATE_1                      0	 // long preamble CCK 1Mbps
+#define MCS_LONGP_RATE_1                      0	// long preamble CCK 1Mbps
 #define MCS_LONGP_RATE_2                      1	// long preamble CCK 1Mbps
 #define MCS_LONGP_RATE_5_5                    2
 #define MCS_LONGP_RATE_11                     3
-#define MCS_SHORTP_RATE_1                      4	 // long preamble CCK 1Mbps. short is forbidden in 1Mbps
+#define MCS_SHORTP_RATE_1                      4	// long preamble CCK 1Mbps. short is forbidden in 1Mbps
 #define MCS_SHORTP_RATE_2                      5	// short preamble CCK 2Mbps
 #define MCS_SHORTP_RATE_5_5                    6
 #define MCS_SHORTP_RATE_11                     7
 // To send duplicate legacy OFDM. set BW=BW_40.  SGI.STBC are reserved
-#define MCS_RATE_6                      0   // legacy OFDM
-#define MCS_RATE_9                      1   // OFDM
-#define MCS_RATE_12                     2   // OFDM
-#define MCS_RATE_18                     3   // OFDM
-#define MCS_RATE_24                     4  // OFDM
-#define MCS_RATE_36                     5   // OFDM
-#define MCS_RATE_48                     6  // OFDM
-#define MCS_RATE_54                     7 // OFDM
+#define MCS_RATE_6                      0	// legacy OFDM
+#define MCS_RATE_9                      1	// OFDM
+#define MCS_RATE_12                     2	// OFDM
+#define MCS_RATE_18                     3	// OFDM
+#define MCS_RATE_24                     4	// OFDM
+#define MCS_RATE_36                     5	// OFDM
+#define MCS_RATE_48                     6	// OFDM
+#define MCS_RATE_54                     7	// OFDM
 // HT
 #define MCS_0		0	// 1S
 #define MCS_1		1
@@ -1070,7 +1051,7 @@
 #define RXSTBC_TWO	2	// rx support of 1 and 2 spatial stream
 #define RXSTBC_THR	3	// rx support of 1~3 spatial stream
 // MCS FEEDBACK
-#define MCSFBK_NONE	0  // not support mcs feedback /
+#define MCSFBK_NONE	0	// not support mcs feedback /
 #define MCSFBK_RSV	1	// reserved
 #define MCSFBK_UNSOLICIT	2	// only support unsolict mcs feedback
 #define MCSFBK_MRQ	3	// response to both MRQ and unsolict mcs feedback
@@ -1081,7 +1062,6 @@
 #define   MMPS_RSV		2
 #define MMPS_ENABLE		3
 
-
 // A-MSDU size
 #define	AMSDU_0	0
 #define	AMSDU_1		1
@@ -1094,28 +1074,28 @@
 #define RATE_2                      1
 #define RATE_5_5                    2
 #define RATE_11                     3
-#define RATE_6                      4   // OFDM
-#define RATE_9                      5   // OFDM
-#define RATE_12                     6   // OFDM
-#define RATE_18                     7   // OFDM
-#define RATE_24                     8   // OFDM
-#define RATE_36                     9   // OFDM
-#define RATE_48                     10  // OFDM
-#define RATE_54                     11  // OFDM
+#define RATE_6                      4	// OFDM
+#define RATE_9                      5	// OFDM
+#define RATE_12                     6	// OFDM
+#define RATE_18                     7	// OFDM
+#define RATE_24                     8	// OFDM
+#define RATE_36                     9	// OFDM
+#define RATE_48                     10	// OFDM
+#define RATE_54                     11	// OFDM
 #define RATE_FIRST_OFDM_RATE        RATE_6
 #define RATE_LAST_OFDM_RATE        	RATE_54
-#define RATE_6_5                    12  // HT mix
-#define RATE_13                     13  // HT mix
-#define RATE_19_5                   14  // HT mix
-#define RATE_26                     15  // HT mix
-#define RATE_39                     16  // HT mix
-#define RATE_52                     17  // HT mix
-#define RATE_58_5                   18  // HT mix
-#define RATE_65                     19  // HT mix
-#define RATE_78                     20  // HT mix
-#define RATE_104                    21  // HT mix
-#define RATE_117                    22  // HT mix
-#define RATE_130                    23  // HT mix
+#define RATE_6_5                    12	// HT mix
+#define RATE_13                     13	// HT mix
+#define RATE_19_5                   14	// HT mix
+#define RATE_26                     15	// HT mix
+#define RATE_39                     16	// HT mix
+#define RATE_52                     17	// HT mix
+#define RATE_58_5                   18	// HT mix
+#define RATE_65                     19	// HT mix
+#define RATE_78                     20	// HT mix
+#define RATE_104                    21	// HT mix
+#define RATE_117                    22	// HT mix
+#define RATE_130                    23	// HT mix
 //#define RATE_AUTO_SWITCH            255 // for StaCfg.FixedTxRate only
 #define HTRATE_0                      12
 #define RATE_FIRST_MM_RATE        HTRATE_0
@@ -1134,34 +1114,34 @@
 
 // Country Region definition
 #define REGION_MINIMUM_BG_BAND            0
-#define REGION_0_BG_BAND                  0       // 1-11
-#define REGION_1_BG_BAND                  1       // 1-13
-#define REGION_2_BG_BAND                  2       // 10-11
-#define REGION_3_BG_BAND                  3       // 10-13
-#define REGION_4_BG_BAND                  4       // 14
-#define REGION_5_BG_BAND                  5       // 1-14
-#define REGION_6_BG_BAND                  6       // 3-9
-#define REGION_7_BG_BAND                  7       // 5-13
-#define REGION_31_BG_BAND                 31       // 5-13
+#define REGION_0_BG_BAND                  0	// 1-11
+#define REGION_1_BG_BAND                  1	// 1-13
+#define REGION_2_BG_BAND                  2	// 10-11
+#define REGION_3_BG_BAND                  3	// 10-13
+#define REGION_4_BG_BAND                  4	// 14
+#define REGION_5_BG_BAND                  5	// 1-14
+#define REGION_6_BG_BAND                  6	// 3-9
+#define REGION_7_BG_BAND                  7	// 5-13
+#define REGION_31_BG_BAND                 31	// 5-13
 #define REGION_MAXIMUM_BG_BAND            7
 
 #define REGION_MINIMUM_A_BAND             0
-#define REGION_0_A_BAND                   0       // 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
-#define REGION_1_A_BAND                   1       // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
-#define REGION_2_A_BAND                   2       // 36, 40, 44, 48, 52, 56, 60, 64
-#define REGION_3_A_BAND                   3       // 52, 56, 60, 64, 149, 153, 157, 161
-#define REGION_4_A_BAND                   4       // 149, 153, 157, 161, 165
-#define REGION_5_A_BAND                   5       // 149, 153, 157, 161
-#define REGION_6_A_BAND                   6       // 36, 40, 44, 48
-#define REGION_7_A_BAND                   7       // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165, 169, 173
-#define REGION_8_A_BAND                   8       // 52, 56, 60, 64
-#define REGION_9_A_BAND                   9       // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165
-#define REGION_10_A_BAND                  10	  // 36, 40, 44, 48, 149, 153, 157, 161, 165
-#define REGION_11_A_BAND                  11	  // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161
-#define REGION_12_A_BAND                  12       // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
-#define REGION_13_A_BAND                  13       // 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161
-#define REGION_14_A_BAND                  14       // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 136, 140, 149, 153, 157, 161, 165
-#define REGION_15_A_BAND                  15       // 149, 153, 157, 161, 165, 169, 173
+#define REGION_0_A_BAND                   0	// 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
+#define REGION_1_A_BAND                   1	// 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
+#define REGION_2_A_BAND                   2	// 36, 40, 44, 48, 52, 56, 60, 64
+#define REGION_3_A_BAND                   3	// 52, 56, 60, 64, 149, 153, 157, 161
+#define REGION_4_A_BAND                   4	// 149, 153, 157, 161, 165
+#define REGION_5_A_BAND                   5	// 149, 153, 157, 161
+#define REGION_6_A_BAND                   6	// 36, 40, 44, 48
+#define REGION_7_A_BAND                   7	// 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165, 169, 173
+#define REGION_8_A_BAND                   8	// 52, 56, 60, 64
+#define REGION_9_A_BAND                   9	// 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165
+#define REGION_10_A_BAND                  10	// 36, 40, 44, 48, 149, 153, 157, 161, 165
+#define REGION_11_A_BAND                  11	// 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161
+#define REGION_12_A_BAND                  12	// 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
+#define REGION_13_A_BAND                  13	// 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161
+#define REGION_14_A_BAND                  14	// 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 136, 140, 149, 153, 157, 161, 165
+#define REGION_15_A_BAND                  15	// 149, 153, 157, 161, 165, 169, 173
 #define REGION_MAXIMUM_A_BAND             15
 
 // pTxD->CipherAlg
@@ -1172,10 +1152,9 @@
 #define CIPHER_AES                  4
 #define CIPHER_CKIP64               5
 #define CIPHER_CKIP128              6
-#define CIPHER_TKIP_NO_MIC          7       // MIC appended by driver: not a valid value in hardware key table
+#define CIPHER_TKIP_NO_MIC          7	// MIC appended by driver: not a valid value in hardware key table
 #define CIPHER_SMS4					8
 
-
 // LED Status.
 #define LED_LINK_DOWN               0
 #define LED_LINK_UP                 1
@@ -1189,11 +1168,11 @@
 // value domain of pAd->LedCntl.LedMode and E2PROM
 #define LED_MODE_DEFAULT            0
 #define LED_MODE_TWO_LED			1
-//#define LED_MODE_SIGNAL_STREGTH		8  // EEPROM define =8
-#define LED_MODE_SIGNAL_STREGTH		0x40 // EEPROM define = 64
+//#define LED_MODE_SIGNAL_STREGTH               8  // EEPROM define =8
+#define LED_MODE_SIGNAL_STREGTH		0x40	// EEPROM define = 64
 
 // RC4 init value, used fro WEP & TKIP
-#define PPPINITFCS32                0xffffffff   /* Initial FCS value */
+#define PPPINITFCS32                0xffffffff	/* Initial FCS value */
 
 // value domain of pAd->StaCfg.PortSecured. 802.1X controlled port definition
 #define WPA_802_1X_PORT_SECURED     1
@@ -1205,7 +1184,6 @@
 //definition of DRS
 #define MAX_STEP_OF_TX_RATE_SWITCH	32
 
-
 // pre-allocated free NDIS PACKET/BUFFER poll for internal usage
 #define MAX_NUM_OF_FREE_NDIS_PACKET 128
 
@@ -1223,7 +1201,7 @@
 #define DEFAULT_RF_TX_POWER         5
 
 #define MAX_INI_BUFFER_SIZE			4096
-#define MAX_PARAM_BUFFER_SIZE		(2048) // enough for ACL (18*64)
+#define MAX_PARAM_BUFFER_SIZE		(2048)	// enough for ACL (18*64)
 											//18 : the length of Mac address acceptable format "01:02:03:04:05:06;")
 											//64 : MAX_NUM_OF_ACL_LIST
 // definition of pAd->OpMode
@@ -1233,10 +1211,10 @@
 
 // ========================= AP rtmp_def.h ===========================
 // value domain for pAd->EventTab.Log[].Event
-#define EVENT_RESET_ACCESS_POINT    0 // Log = "hh:mm:ss   Restart Access Point"
-#define EVENT_ASSOCIATED            1 // Log = "hh:mm:ss   STA 00:01:02:03:04:05 associated"
-#define EVENT_DISASSOCIATED         2 // Log = "hh:mm:ss   STA 00:01:02:03:04:05 left this BSS"
-#define EVENT_AGED_OUT              3 // Log = "hh:mm:ss   STA 00:01:02:03:04:05 was aged-out and removed from this BSS"
+#define EVENT_RESET_ACCESS_POINT    0	// Log = "hh:mm:ss   Restart Access Point"
+#define EVENT_ASSOCIATED            1	// Log = "hh:mm:ss   STA 00:01:02:03:04:05 associated"
+#define EVENT_DISASSOCIATED         2	// Log = "hh:mm:ss   STA 00:01:02:03:04:05 left this BSS"
+#define EVENT_AGED_OUT              3	// Log = "hh:mm:ss   STA 00:01:02:03:04:05 was aged-out and removed from this BSS"
 #define EVENT_COUNTER_M             4
 #define EVENT_INVALID_PSK           5
 #define EVENT_MAX_EVENT_TYPE        6
@@ -1262,7 +1240,6 @@
 // MBSSID definition
 #define ENTRY_NOT_FOUND             0xFF
 
-
 /* After Linux 2.6.9,
  * VLAN module use Private (from user) interface flags (netdevice->priv_flags).
  * #define IFF_802_1Q_VLAN 0x1         --    802.1Q VLAN device.  in if.h
@@ -1282,13 +1259,10 @@
 #define INF_APCLI_DEV_NAME		"apcli"
 #define INF_MESH_DEV_NAME		"mesh"
 
-
 // WEP Key TYPE
 #define WEP_HEXADECIMAL_TYPE    0
 #define WEP_ASCII_TYPE          1
 
-
-
 // WIRELESS EVENTS definition
 /* Max number of char in custom event, refer to wireless_tools.28/wireless.20.h */
 #define IW_CUSTOM_MAX_LEN				  			255	/* In bytes */
@@ -1375,7 +1349,6 @@
 #define GUI_IDLE_POWER_SAVE		3
 // --
 
-
 // definition for WpaSupport flag
 #define WPA_SUPPLICANT_DISABLE				0
 #define WPA_SUPPLICANT_ENABLE				1
@@ -1418,10 +1391,8 @@
 #define cpu2be16(x) SWAP16((x))
 #define be2cpu16(x) SWAP16((x))
 
-
 #define ABS(_x, _y) ((_x) > (_y)) ? ((_x) -(_y)) : ((_y) -(_x))
 
-
 #define A2Dec(_X, _p)				\
 {									\
 	UCHAR *p;						\
@@ -1435,7 +1406,6 @@
 	}												\
 }
 
-
 #define A2Hex(_X, _p)				\
 do{									\
 	char *__p;						\
@@ -1453,6 +1423,4 @@ do{									\
 	}												\
 }while(0)
 
-#endif  // __RTMP_DEF_H__
-
-
+#endif // __RTMP_DEF_H__

drivers/staging/rt2860/rtmp_dot11.h

@@ -30,73 +30,71 @@
 
 #include "rtmp_type.h"
 
-
 // 4-byte HTC field.  maybe included in any frame except non-QOS data frame.  The Order bit must set 1.
 typedef struct PACKED {
-    UINT32		MA:1;	//management action payload exist in (QoS Null+HTC)
-    UINT32		TRQ:1;	//sounding request
-    UINT32		MRQ:1;	//MCS feedback. Request for a MCS feedback
-    UINT32		MRSorASI:3;	// MRQ Sequence identifier. unchanged during entire procedure. 0x000-0x110.
-    UINT32		MFS:3;	//SET to the received value of MRS. 0x111 for unsolicited MFB.
-    UINT32		MFBorASC:7;	//Link adaptation feedback containing recommended MCS. 0x7f for no feedback or not available
-    UINT32		CalPos:2;	// calibration position
-    UINT32		CalSeq:2;  //calibration sequence
-    UINT32		FBKReq:2;	//feedback request
-    UINT32		CSISTEERING:2;	//CSI/ STEERING
-    UINT32		ZLFAnnouce:1;	// ZLF announcement
-    UINT32		rsv:5;  //calibration sequence
-    UINT32		ACConstraint:1;	//feedback request
-    UINT32		RDG:1;	//RDG / More PPDU
+	UINT32 MA:1;		//management action payload exist in (QoS Null+HTC)
+	UINT32 TRQ:1;		//sounding request
+	UINT32 MRQ:1;		//MCS feedback. Request for a MCS feedback
+	UINT32 MRSorASI:3;	// MRQ Sequence identifier. unchanged during entire procedure. 0x000-0x110.
+	UINT32 MFS:3;		//SET to the received value of MRS. 0x111 for unsolicited MFB.
+	UINT32 MFBorASC:7;	//Link adaptation feedback containing recommended MCS. 0x7f for no feedback or not available
+	UINT32 CalPos:2;	// calibration position
+	UINT32 CalSeq:2;	//calibration sequence
+	UINT32 FBKReq:2;	//feedback request
+	UINT32 CSISTEERING:2;	//CSI/ STEERING
+	UINT32 ZLFAnnouce:1;	// ZLF announcement
+	UINT32 rsv:5;		//calibration sequence
+	UINT32 ACConstraint:1;	//feedback request
+	UINT32 RDG:1;		//RDG / More PPDU
 } HT_CONTROL, *PHT_CONTROL;
 
 // 2-byte QOS CONTROL field
 typedef struct PACKED {
-    USHORT      TID:4;
-    USHORT      EOSP:1;
-    USHORT      AckPolicy:2;  //0: normal ACK 1:No ACK 2:scheduled under MTBA/PSMP  3: BA
-    USHORT      AMsduPresent:1;
-    USHORT      Txop_QueueSize:8;
+	USHORT TID:4;
+	USHORT EOSP:1;
+	USHORT AckPolicy:2;	//0: normal ACK 1:No ACK 2:scheduled under MTBA/PSMP  3: BA
+	USHORT AMsduPresent:1;
+	USHORT Txop_QueueSize:8;
 } QOS_CONTROL, *PQOS_CONTROL;
 
-
 // 2-byte Frame control field
-typedef	struct	PACKED {
-	USHORT		Ver:2;				// Protocol version
-	USHORT		Type:2;				// MSDU type
-	USHORT		SubType:4;			// MSDU subtype
-	USHORT		ToDs:1;				// To DS indication
-	USHORT		FrDs:1;				// From DS indication
-	USHORT		MoreFrag:1;			// More fragment bit
-	USHORT		Retry:1;			// Retry status bit
-	USHORT		PwrMgmt:1;			// Power management bit
-	USHORT		MoreData:1;			// More data bit
-	USHORT		Wep:1;				// Wep data
-	USHORT		Order:1;			// Strict order expected
+typedef struct PACKED {
+	USHORT Ver:2;		// Protocol version
+	USHORT Type:2;		// MSDU type
+	USHORT SubType:4;	// MSDU subtype
+	USHORT ToDs:1;		// To DS indication
+	USHORT FrDs:1;		// From DS indication
+	USHORT MoreFrag:1;	// More fragment bit
+	USHORT Retry:1;		// Retry status bit
+	USHORT PwrMgmt:1;	// Power management bit
+	USHORT MoreData:1;	// More data bit
+	USHORT Wep:1;		// Wep data
+	USHORT Order:1;		// Strict order expected
 } FRAME_CONTROL, *PFRAME_CONTROL;
 
-typedef	struct	PACKED _HEADER_802_11	{
-    FRAME_CONTROL   FC;
-    USHORT          Duration;
-    UCHAR           Addr1[MAC_ADDR_LEN];
-    UCHAR           Addr2[MAC_ADDR_LEN];
-	UCHAR			Addr3[MAC_ADDR_LEN];
-	USHORT			Frag:4;
-	USHORT			Sequence:12;
-	UCHAR			Octet[0];
-}	HEADER_802_11, *PHEADER_802_11;
+typedef struct PACKED _HEADER_802_11 {
+	FRAME_CONTROL FC;
+	USHORT Duration;
+	UCHAR Addr1[MAC_ADDR_LEN];
+	UCHAR Addr2[MAC_ADDR_LEN];
+	UCHAR Addr3[MAC_ADDR_LEN];
+	USHORT Frag:4;
+	USHORT Sequence:12;
+	UCHAR Octet[0];
+} HEADER_802_11, *PHEADER_802_11;
 
 typedef struct PACKED _PSPOLL_FRAME {
-    FRAME_CONTROL   FC;
-    USHORT          Aid;
-    UCHAR           Bssid[MAC_ADDR_LEN];
-    UCHAR           Ta[MAC_ADDR_LEN];
-}   PSPOLL_FRAME, *PPSPOLL_FRAME;
+	FRAME_CONTROL FC;
+	USHORT Aid;
+	UCHAR Bssid[MAC_ADDR_LEN];
+	UCHAR Ta[MAC_ADDR_LEN];
+} PSPOLL_FRAME, *PPSPOLL_FRAME;
 
-typedef	struct	PACKED _RTS_FRAME	{
-    FRAME_CONTROL   FC;
-    USHORT          Duration;
-    UCHAR           Addr1[MAC_ADDR_LEN];
-    UCHAR           Addr2[MAC_ADDR_LEN];
-}RTS_FRAME, *PRTS_FRAME;
+typedef struct PACKED _RTS_FRAME {
+	FRAME_CONTROL FC;
+	USHORT Duration;
+	UCHAR Addr1[MAC_ADDR_LEN];
+	UCHAR Addr2[MAC_ADDR_LEN];
+} RTS_FRAME, *PRTS_FRAME;
 
 #endif // __DOT11_BASE_H__ //

drivers/staging/rt2860/rtmp_iface.h

@@ -37,7 +37,6 @@
 #ifndef __RTMP_IFACE_H__
 #define __RTMP_IFACE_H__
 
-
 #ifdef RTMP_PCI_SUPPORT
 #include "iface/rtmp_pci.h"
 #endif // RTMP_PCI_SUPPORT //
@@ -45,40 +44,32 @@
 #include "iface/rtmp_usb.h"
 #endif // RTMP_USB_SUPPORT //
 
-typedef struct _INF_PCI_CONFIG_
-{
-	unsigned long	CSRBaseAddress;     // PCI MMIO Base Address, all access will use
-	unsigned int	irq_num;
-}INF_PCI_CONFIG;
-
-
-typedef struct _INF_USB_CONFIG_
-{
-	UINT8                BulkInEpAddr;		// bulk-in endpoint address
-	UINT8                BulkOutEpAddr[6];	// bulk-out endpoint address
-}INF_USB_CONFIG;
+typedef struct _INF_PCI_CONFIG_ {
+	unsigned long CSRBaseAddress;	// PCI MMIO Base Address, all access will use
+	unsigned int irq_num;
+} INF_PCI_CONFIG;
 
+typedef struct _INF_USB_CONFIG_ {
+	UINT8 BulkInEpAddr;	// bulk-in endpoint address
+	UINT8 BulkOutEpAddr[6];	// bulk-out endpoint address
+} INF_USB_CONFIG;
 
-typedef struct _INF_RBUS_CONFIG_
-{
-	unsigned long		csr_addr;
-	unsigned int		irq;
-}INF_RBUS_CONFIG;
+typedef struct _INF_RBUS_CONFIG_ {
+	unsigned long csr_addr;
+	unsigned int irq;
+} INF_RBUS_CONFIG;
 
-
-typedef enum _RTMP_INF_TYPE_
-{
+typedef enum _RTMP_INF_TYPE_ {
 	RTMP_DEV_INF_UNKNOWN = 0,
 	RTMP_DEV_INF_PCI = 1,
 	RTMP_DEV_INF_USB = 2,
 	RTMP_DEV_INF_RBUS = 4,
-}RTMP_INF_TYPE;
-
+} RTMP_INF_TYPE;
 
-typedef union _RTMP_INF_CONFIG_{
-	struct _INF_PCI_CONFIG_			pciConfig;
-	struct _INF_USB_CONFIG_			usbConfig;
-	struct _INF_RBUS_CONFIG_		rbusConfig;
-}RTMP_INF_CONFIG;
+typedef union _RTMP_INF_CONFIG_ {
+	struct _INF_PCI_CONFIG_ pciConfig;
+	struct _INF_USB_CONFIG_ usbConfig;
+	struct _INF_RBUS_CONFIG_ rbusConfig;
+} RTMP_INF_CONFIG;
 
 #endif // __RTMP_IFACE_H__ //

drivers/staging/rt2860/rtmp_mcu.h

@@ -38,18 +38,12 @@
 #ifndef __RTMP_MCU_H__
 #define __RTMP_MCU_H__
 
+INT RtmpAsicEraseFirmware(IN PRTMP_ADAPTER pAd);
 
-INT RtmpAsicEraseFirmware(
-	IN PRTMP_ADAPTER pAd);
+NDIS_STATUS RtmpAsicLoadFirmware(IN PRTMP_ADAPTER pAd);
 
-NDIS_STATUS RtmpAsicLoadFirmware(
-	IN PRTMP_ADAPTER pAd);
-
-INT RtmpAsicSendCommandToMcu(
-	IN PRTMP_ADAPTER pAd,
-	IN UCHAR		 Command,
-	IN UCHAR		 Token,
-	IN UCHAR		 Arg0,
-	IN UCHAR		 Arg1);
+INT RtmpAsicSendCommandToMcu(IN PRTMP_ADAPTER pAd,
+			     IN UCHAR Command,
+			     IN UCHAR Token, IN UCHAR Arg0, IN UCHAR Arg1);
 
 #endif // __RTMP_MCU_H__ //

drivers/staging/rt2860/rtmp_os.h

@@ -34,7 +34,6 @@
     ---------    ----------    ----------------------------------------------
  */
 
-
 #ifndef __RTMP_OS_H__
 #define __RTMP_OS_H__
 
@@ -42,8 +41,6 @@
 #include "rt_linux.h"
 #endif // LINUX //
 
-
-
 /*
 	This data structure mainly strip some callback function defined in
 	"struct net_device" in kernel source "include/linux/netdevice.h".
@@ -51,46 +48,41 @@
 	The definition of this data structure may various depends on different
 	OS. Use it carefully.
 */
-typedef struct _RTMP_OS_NETDEV_OP_HOOK_
-{
+typedef struct _RTMP_OS_NETDEV_OP_HOOK_ {
 	const struct net_device_ops *netdev_ops;
-	void			*priv;
-	int			priv_flags;
+	void *priv;
+	int priv_flags;
 	unsigned char devAddr[6];
-	unsigned char	devName[16];
-	unsigned char	needProtcted;
-}RTMP_OS_NETDEV_OP_HOOK, *PRTMP_OS_NETDEV_OP_HOOK;
+	unsigned char devName[16];
+	unsigned char needProtcted;
+} RTMP_OS_NETDEV_OP_HOOK, *PRTMP_OS_NETDEV_OP_HOOK;
 
-
-typedef enum _RTMP_TASK_STATUS_
-{
+typedef enum _RTMP_TASK_STATUS_ {
 	RTMP_TASK_STAT_UNKNOWN = 0,
 	RTMP_TASK_STAT_INITED = 1,
 	RTMP_TASK_STAT_RUNNING = 2,
 	RTMP_TASK_STAT_STOPED = 4,
-}RTMP_TASK_STATUS;
+} RTMP_TASK_STATUS;
 #define RTMP_TASK_CAN_DO_INSERT		(RTMP_TASK_STAT_INITED |RTMP_TASK_STAT_RUNNING)
 
 #define RTMP_OS_TASK_NAME_LEN	16
-typedef struct _RTMP_OS_TASK_
-{
-	char					taskName[RTMP_OS_TASK_NAME_LEN];
-	void					*priv;
-	//unsigned long		taskFlags;
-	RTMP_TASK_STATUS	taskStatus;
+typedef struct _RTMP_OS_TASK_ {
+	char taskName[RTMP_OS_TASK_NAME_LEN];
+	void *priv;
+	//unsigned long         taskFlags;
+	RTMP_TASK_STATUS taskStatus;
 #ifndef KTHREAD_SUPPORT
-	RTMP_OS_SEM			taskSema;
-	RTMP_OS_PID			taskPID;
-	struct completion		taskComplete;
+	RTMP_OS_SEM taskSema;
+	RTMP_OS_PID taskPID;
+	struct completion taskComplete;
 #endif
-	unsigned char			task_killed;
+	unsigned char task_killed;
 #ifdef KTHREAD_SUPPORT
-	struct task_struct	*kthread_task;
-	wait_queue_head_t		kthread_q;
-	BOOLEAN					kthread_running;
+	struct task_struct *kthread_task;
+	wait_queue_head_t kthread_q;
+	BOOLEAN kthread_running;
 #endif
-}RTMP_OS_TASK;
-
+} RTMP_OS_TASK;
 
 int RtmpOSIRQRequest(IN PNET_DEV pNetDev);
 int RtmpOSIRQRelease(IN PNET_DEV pNetDev);

drivers/staging/rt2860/rtmp_timer.h

@@ -43,59 +43,52 @@
 
 #include "rtmp_os.h"
 
-
 #define DECLARE_TIMER_FUNCTION(_func)			\
 	void rtmp_timer_##_func(unsigned long data)
 
 #define GET_TIMER_FUNCTION(_func)				\
 	rtmp_timer_##_func
 
-
 /* ----------------- Timer Related MARCO ---------------*/
 // In some os or chipset, we have a lot of timer functions and will read/write register,
 //   it's not allowed in Linux USB sub-system to do it ( because of sleep issue when
 //  submit to ctrl pipe). So we need a wrapper function to take care it.
 
 #ifdef RTMP_TIMER_TASK_SUPPORT
-typedef VOID (*RTMP_TIMER_TASK_HANDLE)(
-	IN  PVOID   SystemSpecific1,
-	IN  PVOID   FunctionContext,
-	IN  PVOID   SystemSpecific2,
-	IN  PVOID   SystemSpecific3);
+typedef VOID(*RTMP_TIMER_TASK_HANDLE) (IN PVOID SystemSpecific1,
+				       IN PVOID FunctionContext,
+				       IN PVOID SystemSpecific2,
+				       IN PVOID SystemSpecific3);
 #endif // RTMP_TIMER_TASK_SUPPORT //
 
-typedef struct  _RALINK_TIMER_STRUCT    {
-	RTMP_OS_TIMER		TimerObj;       // Ndis Timer object
-	BOOLEAN				Valid;			// Set to True when call RTMPInitTimer
-	BOOLEAN				State;          // True if timer cancelled
-	BOOLEAN				PeriodicType;	// True if timer is periodic timer
-	BOOLEAN				Repeat;         // True if periodic timer
-	ULONG				TimerValue;     // Timer value in milliseconds
-	ULONG				cookie;			// os specific object
+typedef struct _RALINK_TIMER_STRUCT {
+	RTMP_OS_TIMER TimerObj;	// Ndis Timer object
+	BOOLEAN Valid;		// Set to True when call RTMPInitTimer
+	BOOLEAN State;		// True if timer cancelled
+	BOOLEAN PeriodicType;	// True if timer is periodic timer
+	BOOLEAN Repeat;		// True if periodic timer
+	ULONG TimerValue;	// Timer value in milliseconds
+	ULONG cookie;		// os specific object
 #ifdef RTMP_TIMER_TASK_SUPPORT
-	RTMP_TIMER_TASK_HANDLE	handle;
-	void					*pAd;
-#endif // RTMP_TIMER_TASK_SUPPORT //
-}RALINK_TIMER_STRUCT, *PRALINK_TIMER_STRUCT;
-
+	RTMP_TIMER_TASK_HANDLE handle;
+	void *pAd;
+#endif				// RTMP_TIMER_TASK_SUPPORT //
+} RALINK_TIMER_STRUCT, *PRALINK_TIMER_STRUCT;
 
 #ifdef RTMP_TIMER_TASK_SUPPORT
-typedef struct _RTMP_TIMER_TASK_ENTRY_
-{
-	RALINK_TIMER_STRUCT			*pRaTimer;
-	struct _RTMP_TIMER_TASK_ENTRY_	*pNext;
-}RTMP_TIMER_TASK_ENTRY;
-
+typedef struct _RTMP_TIMER_TASK_ENTRY_ {
+	RALINK_TIMER_STRUCT *pRaTimer;
+	struct _RTMP_TIMER_TASK_ENTRY_ *pNext;
+} RTMP_TIMER_TASK_ENTRY;
 
 #define TIMER_QUEUE_SIZE_MAX	128
-typedef struct _RTMP_TIMER_TASK_QUEUE_
-{
-	unsigned int				status;
-	unsigned char				*pTimerQPoll;
-	RTMP_TIMER_TASK_ENTRY	*pQPollFreeList;
-	RTMP_TIMER_TASK_ENTRY	*pQHead;
-	RTMP_TIMER_TASK_ENTRY	*pQTail;
-}RTMP_TIMER_TASK_QUEUE;
+typedef struct _RTMP_TIMER_TASK_QUEUE_ {
+	unsigned int status;
+	unsigned char *pTimerQPoll;
+	RTMP_TIMER_TASK_ENTRY *pQPollFreeList;
+	RTMP_TIMER_TASK_ENTRY *pQHead;
+	RTMP_TIMER_TASK_ENTRY *pQTail;
+} RTMP_TIMER_TASK_QUEUE;
 
 #define BUILD_TIMER_FUNCTION(_func)										\
 void rtmp_timer_##_func(unsigned long data)										\
@@ -122,7 +115,6 @@ void rtmp_timer_##_func(unsigned long data)										\
 }
 #endif // RTMP_TIMER_TASK_SUPPORT //
 
-
 DECLARE_TIMER_FUNCTION(MlmePeriodicExec);
 DECLARE_TIMER_FUNCTION(MlmeRssiReportExec);
 DECLARE_TIMER_FUNCTION(AsicRxAntEvalTimeout);
@@ -152,5 +144,4 @@ DECLARE_TIMER_FUNCTION(RtmpUsbStaAsicForceWakeupTimeout);
 DECLARE_TIMER_FUNCTION(LedCtrlMain);
 #endif
 
-
 #endif // __RTMP_TIMER_H__ //

drivers/staging/rt2860/rtmp_type.h

@@ -38,110 +38,101 @@
 #ifndef __RTMP_TYPE_H__
 #define __RTMP_TYPE_H__
 
-
 #define PACKED  __attribute__ ((packed))
 
 #ifdef LINUX
 // Put platform dependent declaration here
 // For example, linux type definition
-typedef unsigned char		UINT8;
-typedef unsigned short		UINT16;
-typedef unsigned int		UINT32;
-typedef unsigned long long	UINT64;
-typedef int					INT32;
-typedef long long 			INT64;
+typedef unsigned char UINT8;
+typedef unsigned short UINT16;
+typedef unsigned int UINT32;
+typedef unsigned long long UINT64;
+typedef int INT32;
+typedef long long INT64;
 #endif // LINUX //
 
-typedef unsigned char *			PUINT8;
-typedef unsigned short *		PUINT16;
-typedef unsigned int *			PUINT32;
-typedef unsigned long long *	PUINT64;
-typedef int	*					PINT32;
-typedef long long * 			PINT64;
+typedef unsigned char *PUINT8;
+typedef unsigned short *PUINT16;
+typedef unsigned int *PUINT32;
+typedef unsigned long long *PUINT64;
+typedef int *PINT32;
+typedef long long *PINT64;
 
 // modified for fixing compile warning on Sigma 8634 platform
-typedef char					STRING;
-typedef signed char			CHAR;
-
-typedef signed short		SHORT;
-typedef signed int			INT;
-typedef signed long			LONG;
-typedef signed long long	LONGLONG;
+typedef char STRING;
+typedef signed char CHAR;
 
+typedef signed short SHORT;
+typedef signed int INT;
+typedef signed long LONG;
+typedef signed long long LONGLONG;
 
 #ifdef LINUX
-typedef unsigned char		UCHAR;
-typedef unsigned short		USHORT;
-typedef unsigned int		UINT;
-typedef unsigned long		ULONG;
+typedef unsigned char UCHAR;
+typedef unsigned short USHORT;
+typedef unsigned int UINT;
+typedef unsigned long ULONG;
 #endif // LINUX //
-typedef unsigned long long	ULONGLONG;
+typedef unsigned long long ULONGLONG;
 
-typedef unsigned char		BOOLEAN;
+typedef unsigned char BOOLEAN;
 #ifdef LINUX
-typedef void				VOID;
+typedef void VOID;
 #endif // LINUX //
 
-typedef char *				PSTRING;
-typedef VOID *				PVOID;
-typedef CHAR *				PCHAR;
-typedef UCHAR * 			PUCHAR;
-typedef USHORT *			PUSHORT;
-typedef LONG *				PLONG;
-typedef ULONG *				PULONG;
-typedef UINT *				PUINT;
+typedef char *PSTRING;
+typedef VOID *PVOID;
+typedef CHAR *PCHAR;
+typedef UCHAR *PUCHAR;
+typedef USHORT *PUSHORT;
+typedef LONG *PLONG;
+typedef ULONG *PULONG;
+typedef UINT *PUINT;
 
-typedef unsigned int	NDIS_MEDIA_STATE;
+typedef unsigned int NDIS_MEDIA_STATE;
 
 typedef union _LARGE_INTEGER {
-    struct {
-        UINT LowPart;
-        INT32 HighPart;
-    } u;
-    INT64 QuadPart;
+	struct {
+		UINT LowPart;
+		INT32 HighPart;
+	} u;
+	INT64 QuadPart;
 } LARGE_INTEGER;
 
-
 //
 // Register set pair for initialzation register set definition
 //
-typedef struct  _RTMP_REG_PAIR
-{
-	ULONG   Register;
-	ULONG   Value;
+typedef struct _RTMP_REG_PAIR {
+	ULONG Register;
+	ULONG Value;
 } RTMP_REG_PAIR, *PRTMP_REG_PAIR;
 
-typedef struct  _REG_PAIR
-{
-	UCHAR   Register;
-	UCHAR   Value;
+typedef struct _REG_PAIR {
+	UCHAR Register;
+	UCHAR Value;
 } REG_PAIR, *PREG_PAIR;
 
 //
 // Register set pair for initialzation register set definition
 //
-typedef struct  _RTMP_RF_REGS
-{
-	UCHAR   Channel;
-	ULONG   R1;
-	ULONG   R2;
-	ULONG   R3;
-	ULONG   R4;
+typedef struct _RTMP_RF_REGS {
+	UCHAR Channel;
+	ULONG R1;
+	ULONG R2;
+	ULONG R3;
+	ULONG R4;
 } RTMP_RF_REGS, *PRTMP_RF_REGS;
 
 typedef struct _FREQUENCY_ITEM {
-	UCHAR	Channel;
-	UCHAR	N;
-	UCHAR	R;
-	UCHAR	K;
+	UCHAR Channel;
+	UCHAR N;
+	UCHAR R;
+	UCHAR K;
 } FREQUENCY_ITEM, *PFREQUENCY_ITEM;
 
-
-typedef int				NTSTATUS;
-
+typedef int NTSTATUS;
 
 #define STATUS_SUCCESS				0x00
 #define STATUS_UNSUCCESSFUL		0x01
 
-#endif  // __RTMP_TYPE_H__ //
-
+#endif // __RTMP_TYPE_H__ //

drivers/staging/rt2860/rtusb_io.h

@@ -25,7 +25,6 @@
  *************************************************************************
 */
 
-
 #ifndef __RTUSB_IO_H__
 #define __RTUSB_IO_H__
 
@@ -60,8 +59,8 @@
 #define CMDTHREAD_SET_ASIC_WCID                     0x0D730226	// cmd
 #define CMDTHREAD_SET_ASIC_WCID_CIPHER              0x0D730227	// cmd
 #define CMDTHREAD_QKERIODIC_EXECUT                  0x0D73023D	// cmd
-#define RT_CMD_SET_KEY_TABLE                        0x0D730228  // cmd
-#define RT_CMD_SET_RX_WCID_TABLE                    0x0D730229  // cmd
+#define RT_CMD_SET_KEY_TABLE                        0x0D730228	// cmd
+#define RT_CMD_SET_RX_WCID_TABLE                    0x0D730229	// cmd
 #define CMDTHREAD_SET_CLIENT_MAC_ENTRY              0x0D73023E	// cmd
 #define CMDTHREAD_SET_GROUP_KEY						0x0D73023F	// cmd
 #define CMDTHREAD_SET_PAIRWISE_KEY					0x0D730240	// cmd
@@ -75,34 +74,31 @@
 #define CMDTHREAD_UPDATE_PROTECT					0x0D790103	// cmd
 // end johnli
 
-
 //CMDTHREAD_MULTI_READ_MAC
 //CMDTHREAD_MULTI_WRITE_MAC
 //CMDTHREAD_VENDOR_EEPROM_READ
 //CMDTHREAD_VENDOR_EEPROM_WRITE
-typedef	struct	_CMDHandler_TLV	{
-	USHORT		Offset;
-	USHORT		Length;
-	UCHAR		DataFirst;
-}	CMDHandler_TLV, *PCMDHandler_TLV;
-
-
-typedef	struct _CmdQElmt	{
-	UINT				command;
-	PVOID				buffer;
-	ULONG				bufferlength;
-	BOOLEAN				CmdFromNdis;
-	BOOLEAN				SetOperation;
-	struct _CmdQElmt	*next;
-}	CmdQElmt, *PCmdQElmt;
-
-typedef	struct	_CmdQ	{
-	UINT		size;
-	CmdQElmt	*head;
-	CmdQElmt	*tail;
-	UINT32		CmdQState;
-}CmdQ, *PCmdQ;
-
+typedef struct _CMDHandler_TLV {
+	USHORT Offset;
+	USHORT Length;
+	UCHAR DataFirst;
+} CMDHandler_TLV, *PCMDHandler_TLV;
+
+typedef struct _CmdQElmt {
+	UINT command;
+	PVOID buffer;
+	ULONG bufferlength;
+	BOOLEAN CmdFromNdis;
+	BOOLEAN SetOperation;
+	struct _CmdQElmt *next;
+} CmdQElmt, *PCmdQElmt;
+
+typedef struct _CmdQ {
+	UINT size;
+	CmdQElmt *head;
+	CmdQElmt *tail;
+	UINT32 CmdQState;
+} CmdQ, *PCmdQ;
 
 #define EnqueueCmd(cmdq, cmdqelmt)		\
 {										\
@@ -115,7 +111,6 @@ typedef	struct	_CmdQ	{
 	cmdq->size++;						\
 }
 
-
 /******************************************************************************
 
 	USB Cmd to ASIC Related MACRO
@@ -185,5 +180,4 @@ typedef	struct	_CmdQ	{
 			RTUSBEnqueueInternalCmd((_pAd), CMDTHREAD_SET_ASIC_WCID, &SetAsicWcid, sizeof(RT_SET_ASIC_WCID));	\
 		}while(0)
 
-
 #endif // __RTUSB_IO_H__ //

drivers/staging/rt2860/spectrum.h

@@ -31,10 +31,7 @@
 #include "rtmp_type.h"
 #include "spectrum_def.h"
 
-
-CHAR RTMP_GetTxPwr(
-	IN PRTMP_ADAPTER pAd,
-	IN HTTRANSMIT_SETTING HTTxMode);
+CHAR RTMP_GetTxPwr(IN PRTMP_ADAPTER pAd, IN HTTRANSMIT_SETTING HTTxMode);
 
 /*
 	==========================================================================
@@ -48,17 +45,16 @@ CHAR RTMP_GetTxPwr(
 	Return	: None.
 	==========================================================================
  */
-VOID MakeMeasurementReqFrame(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pOutBuffer,
-	OUT PULONG pFrameLen,
-	IN UINT8 TotalLen,
-	IN UINT8 Category,
-	IN UINT8 Action,
-	IN UINT8 MeasureToken,
-	IN UINT8 MeasureReqMode,
-	IN UINT8 MeasureReqType,
-	IN UINT8 NumOfRepetitions);
+VOID MakeMeasurementReqFrame(IN PRTMP_ADAPTER pAd,
+			     OUT PUCHAR pOutBuffer,
+			     OUT PULONG pFrameLen,
+			     IN UINT8 TotalLen,
+			     IN UINT8 Category,
+			     IN UINT8 Action,
+			     IN UINT8 MeasureToken,
+			     IN UINT8 MeasureReqMode,
+			     IN UINT8 MeasureReqType,
+			     IN UINT8 NumOfRepetitions);
 
 /*
 	==========================================================================
@@ -72,15 +68,13 @@ VOID MakeMeasurementReqFrame(
 	Return	: None.
 	==========================================================================
  */
-VOID EnqueueMeasurementRep(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pDA,
-	IN UINT8 DialogToken,
-	IN UINT8 MeasureToken,
-	IN UINT8 MeasureReqMode,
-	IN UINT8 MeasureReqType,
-	IN UINT8 ReportInfoLen,
-	IN PUINT8 pReportInfo);
+VOID EnqueueMeasurementRep(IN PRTMP_ADAPTER pAd,
+			   IN PUCHAR pDA,
+			   IN UINT8 DialogToken,
+			   IN UINT8 MeasureToken,
+			   IN UINT8 MeasureReqMode,
+			   IN UINT8 MeasureReqType,
+			   IN UINT8 ReportInfoLen, IN PUINT8 pReportInfo);
 
 /*
 	==========================================================================
@@ -94,10 +88,7 @@ VOID EnqueueMeasurementRep(
 	Return	: None.
 	==========================================================================
  */
-VOID EnqueueTPCReq(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pDA,
-	IN UCHAR DialogToken);
+VOID EnqueueTPCReq(IN PRTMP_ADAPTER pAd, IN PUCHAR pDA, IN UCHAR DialogToken);
 
 /*
 	==========================================================================
@@ -111,12 +102,9 @@ VOID EnqueueTPCReq(
 	Return	: None.
 	==========================================================================
  */
-VOID EnqueueTPCRep(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pDA,
-	IN UINT8 DialogToken,
-	IN UINT8 TxPwr,
-	IN UINT8 LinkMargin);
+VOID EnqueueTPCRep(IN PRTMP_ADAPTER pAd,
+		   IN PUCHAR pDA,
+		   IN UINT8 DialogToken, IN UINT8 TxPwr, IN UINT8 LinkMargin);
 
 /*
 	==========================================================================
@@ -132,11 +120,8 @@ VOID EnqueueTPCRep(
 	Return	: None.
 	==========================================================================
  */
-VOID EnqueueChSwAnn(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pDA,
-	IN UINT8 ChSwMode,
-	IN UINT8 NewCh);
+VOID EnqueueChSwAnn(IN PRTMP_ADAPTER pAd,
+		    IN PUCHAR pDA, IN UINT8 ChSwMode, IN UINT8 NewCh);
 
 /*
 	==========================================================================
@@ -150,9 +135,7 @@ VOID EnqueueChSwAnn(
 	Return	: None.
 	==========================================================================
  */
-VOID PeerSpectrumAction(
-    IN PRTMP_ADAPTER pAd,
-    IN MLME_QUEUE_ELEM *Elem);
+VOID PeerSpectrumAction(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem);
 
 /*
 	==========================================================================
@@ -163,73 +146,44 @@ VOID PeerSpectrumAction(
 	Return	: None.
 	==========================================================================
  */
-INT Set_MeasureReq_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PSTRING			arg);
-
-INT Set_TpcReq_Proc(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PSTRING			arg);
-
-INT Set_PwrConstraint(
-	IN	PRTMP_ADAPTER	pAd,
-	IN	PSTRING			arg);
-
-
-VOID MeasureReqTabInit(
-	IN PRTMP_ADAPTER pAd);
-
-VOID MeasureReqTabExit(
-	IN PRTMP_ADAPTER pAd);
-
-PMEASURE_REQ_ENTRY MeasureReqLookUp(
-	IN PRTMP_ADAPTER	pAd,
-	IN UINT8			DialogToken);
-
-PMEASURE_REQ_ENTRY MeasureReqInsert(
-	IN PRTMP_ADAPTER	pAd,
-	IN UINT8			DialogToken);
-
-VOID MeasureReqDelete(
-	IN PRTMP_ADAPTER	pAd,
-	IN UINT8			DialogToken);
-
-VOID InsertChannelRepIE(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pFrameBuf,
-	OUT PULONG pFrameLen,
-	IN PSTRING pCountry,
-	IN UINT8 RegulatoryClass);
-
-VOID InsertTpcReportIE(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pFrameBuf,
-	OUT PULONG pFrameLen,
-	IN UINT8 TxPwr,
-	IN UINT8 LinkMargin);
-
-VOID InsertDialogToken(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pFrameBuf,
-	OUT PULONG pFrameLen,
-	IN UINT8 DialogToken);
-
-VOID TpcReqTabInit(
-	IN PRTMP_ADAPTER pAd);
-
-VOID TpcReqTabExit(
-	IN PRTMP_ADAPTER pAd);
-
-VOID NotifyChSwAnnToPeerAPs(
-	IN PRTMP_ADAPTER pAd,
-	IN PUCHAR pRA,
-	IN PUCHAR pTA,
-	IN UINT8 ChSwMode,
-	IN UINT8 Channel);
-
-VOID RguClass_BuildBcnChList(
-	IN PRTMP_ADAPTER pAd,
-	OUT PUCHAR pBuf,
-	OUT	PULONG pBufLen);
-#endif // __SPECTRUM_H__ //
+INT Set_MeasureReq_Proc(IN PRTMP_ADAPTER pAd, IN PSTRING arg);
+
+INT Set_TpcReq_Proc(IN PRTMP_ADAPTER pAd, IN PSTRING arg);
+
+INT Set_PwrConstraint(IN PRTMP_ADAPTER pAd, IN PSTRING arg);
+
+VOID MeasureReqTabInit(IN PRTMP_ADAPTER pAd);
+
+VOID MeasureReqTabExit(IN PRTMP_ADAPTER pAd);
+
+PMEASURE_REQ_ENTRY MeasureReqLookUp(IN PRTMP_ADAPTER pAd, IN UINT8 DialogToken);
+
+PMEASURE_REQ_ENTRY MeasureReqInsert(IN PRTMP_ADAPTER pAd, IN UINT8 DialogToken);
 
+VOID MeasureReqDelete(IN PRTMP_ADAPTER pAd, IN UINT8 DialogToken);
+
+VOID InsertChannelRepIE(IN PRTMP_ADAPTER pAd,
+			OUT PUCHAR pFrameBuf,
+			OUT PULONG pFrameLen,
+			IN PSTRING pCountry, IN UINT8 RegulatoryClass);
+
+VOID InsertTpcReportIE(IN PRTMP_ADAPTER pAd,
+		       OUT PUCHAR pFrameBuf,
+		       OUT PULONG pFrameLen,
+		       IN UINT8 TxPwr, IN UINT8 LinkMargin);
+
+VOID InsertDialogToken(IN PRTMP_ADAPTER pAd,
+		       OUT PUCHAR pFrameBuf,
+		       OUT PULONG pFrameLen, IN UINT8 DialogToken);
+
+VOID TpcReqTabInit(IN PRTMP_ADAPTER pAd);
+
+VOID TpcReqTabExit(IN PRTMP_ADAPTER pAd);
+
+VOID NotifyChSwAnnToPeerAPs(IN PRTMP_ADAPTER pAd,
+			    IN PUCHAR pRA,
+			    IN PUCHAR pTA, IN UINT8 ChSwMode, IN UINT8 Channel);
+
+VOID RguClass_BuildBcnChList(IN PRTMP_ADAPTER pAd,
+			     OUT PUCHAR pBuf, OUT PULONG pBufLen);
+#endif // __SPECTRUM_H__ //

drivers/staging/rt2860/spectrum_def.h

@@ -39,69 +39,59 @@
 #ifndef __SPECTRUM_DEF_H__
 #define __SPECTRUM_DEF_H__
 
-
 #define MAX_MEASURE_REQ_TAB_SIZE		32
 #define MAX_HASH_MEASURE_REQ_TAB_SIZE	MAX_MEASURE_REQ_TAB_SIZE
 
 #define MAX_TPC_REQ_TAB_SIZE			32
 #define MAX_HASH_TPC_REQ_TAB_SIZE		MAX_TPC_REQ_TAB_SIZE
 
-#define MIN_RCV_PWR				100		/* Negative value ((dBm) */
+#define MIN_RCV_PWR				100	/* Negative value ((dBm) */
 
-#define TPC_REQ_AGE_OUT			500		/* ms */
-#define MQ_REQ_AGE_OUT			500		/* ms */
+#define TPC_REQ_AGE_OUT			500	/* ms */
+#define MQ_REQ_AGE_OUT			500	/* ms */
 
 #define TPC_DIALOGTOKEN_HASH_INDEX(_DialogToken)	((_DialogToken) % MAX_HASH_TPC_REQ_TAB_SIZE)
 #define MQ_DIALOGTOKEN_HASH_INDEX(_DialogToken)		((_DialogToken) % MAX_MEASURE_REQ_TAB_SIZE)
 
-typedef struct _MEASURE_REQ_ENTRY
-{
+typedef struct _MEASURE_REQ_ENTRY {
 	struct _MEASURE_REQ_ENTRY *pNext;
 	ULONG lastTime;
-	BOOLEAN	Valid;
+	BOOLEAN Valid;
 	UINT8 DialogToken;
 	UINT8 MeasureDialogToken[3];	// 0:basic measure, 1: CCA measure, 2: RPI_Histogram measure.
 } MEASURE_REQ_ENTRY, *PMEASURE_REQ_ENTRY;
 
-typedef struct _MEASURE_REQ_TAB
-{
+typedef struct _MEASURE_REQ_TAB {
 	UCHAR Size;
 	PMEASURE_REQ_ENTRY Hash[MAX_HASH_MEASURE_REQ_TAB_SIZE];
 	MEASURE_REQ_ENTRY Content[MAX_MEASURE_REQ_TAB_SIZE];
 } MEASURE_REQ_TAB, *PMEASURE_REQ_TAB;
 
-typedef struct _TPC_REQ_ENTRY
-{
+typedef struct _TPC_REQ_ENTRY {
 	struct _TPC_REQ_ENTRY *pNext;
 	ULONG lastTime;
 	BOOLEAN Valid;
 	UINT8 DialogToken;
 } TPC_REQ_ENTRY, *PTPC_REQ_ENTRY;
 
-typedef struct _TPC_REQ_TAB
-{
+typedef struct _TPC_REQ_TAB {
 	UCHAR Size;
 	PTPC_REQ_ENTRY Hash[MAX_HASH_TPC_REQ_TAB_SIZE];
 	TPC_REQ_ENTRY Content[MAX_TPC_REQ_TAB_SIZE];
 } TPC_REQ_TAB, *PTPC_REQ_TAB;
 
-
 /* The regulatory information */
-typedef struct _DOT11_CHANNEL_SET
-{
+typedef struct _DOT11_CHANNEL_SET {
 	UCHAR NumberOfChannels;
 	UINT8 MaxTxPwr;
 	UCHAR ChannelList[16];
 } DOT11_CHANNEL_SET, *PDOT11_CHANNEL_SET;
 
-typedef struct _DOT11_REGULATORY_INFORMATION
-{
+typedef struct _DOT11_REGULATORY_INFORMATION {
 	UCHAR RegulatoryClass;
 	DOT11_CHANNEL_SET ChannelSet;
 } DOT11_REGULATORY_INFORMATION, *PDOT11_REGULATORY_INFORMATION;
 
-
-
 #define RM_TPC_REQ				0
 #define RM_MEASURE_REQ			1
 
@@ -111,53 +101,44 @@ typedef struct _DOT11_REGULATORY_INFORMATION
 #define RM_CH_LOAD				3
 #define RM_NOISE_HISTOGRAM		4
 
-
-typedef struct PACKED _TPC_REPORT_INFO
-{
+typedef struct PACKED _TPC_REPORT_INFO {
 	UINT8 TxPwr;
 	UINT8 LinkMargin;
 } TPC_REPORT_INFO, *PTPC_REPORT_INFO;
 
-typedef struct PACKED _CH_SW_ANN_INFO
-{
+typedef struct PACKED _CH_SW_ANN_INFO {
 	UINT8 ChSwMode;
 	UINT8 Channel;
 	UINT8 ChSwCnt;
 } CH_SW_ANN_INFO, *PCH_SW_ANN_INFO;
 
-typedef union PACKED _MEASURE_REQ_MODE
-{
-	struct PACKED
-	{
+typedef union PACKED _MEASURE_REQ_MODE {
+	struct PACKED {
 		UINT8 Parallel:1;
 		UINT8 Enable:1;
 		UINT8 Request:1;
 		UINT8 Report:1;
 		UINT8 DurationMandatory:1;
-		UINT8 :3;
+		 UINT8:3;
 	} field;
 	UINT8 word;
 } MEASURE_REQ_MODE, *PMEASURE_REQ_MODE;
 
-typedef struct PACKED _MEASURE_REQ
-{
+typedef struct PACKED _MEASURE_REQ {
 	UINT8 ChNum;
 	UINT64 MeasureStartTime;
 	UINT16 MeasureDuration;
 } MEASURE_REQ, *PMEASURE_REQ;
 
-typedef struct PACKED _MEASURE_REQ_INFO
-{
+typedef struct PACKED _MEASURE_REQ_INFO {
 	UINT8 Token;
 	MEASURE_REQ_MODE ReqMode;
 	UINT8 ReqType;
 	UINT8 Oct[0];
 } MEASURE_REQ_INFO, *PMEASURE_REQ_INFO;
 
-typedef union PACKED _MEASURE_BASIC_REPORT_MAP
-{
-	struct PACKED
-	{
+typedef union PACKED _MEASURE_BASIC_REPORT_MAP {
+	struct PACKED {
 		UINT8 BSS:1;
 
 		UINT8 OfdmPreamble:1;
@@ -169,34 +150,29 @@ typedef union PACKED _MEASURE_BASIC_REPORT_MAP
 	UINT8 word;
 } MEASURE_BASIC_REPORT_MAP, *PMEASURE_BASIC_REPORT_MAP;
 
-typedef struct PACKED _MEASURE_BASIC_REPORT
-{
+typedef struct PACKED _MEASURE_BASIC_REPORT {
 	UINT8 ChNum;
 	UINT64 MeasureStartTime;
 	UINT16 MeasureDuration;
 	MEASURE_BASIC_REPORT_MAP Map;
 } MEASURE_BASIC_REPORT, *PMEASURE_BASIC_REPORT;
 
-typedef struct PACKED _MEASURE_CCA_REPORT
-{
+typedef struct PACKED _MEASURE_CCA_REPORT {
 	UINT8 ChNum;
 	UINT64 MeasureStartTime;
 	UINT16 MeasureDuration;
 	UINT8 CCA_Busy_Fraction;
 } MEASURE_CCA_REPORT, *PMEASURE_CCA_REPORT;
 
-typedef struct PACKED _MEASURE_RPI_REPORT
-{
+typedef struct PACKED _MEASURE_RPI_REPORT {
 	UINT8 ChNum;
 	UINT64 MeasureStartTime;
 	UINT16 MeasureDuration;
 	UINT8 RPI_Density[8];
 } MEASURE_RPI_REPORT, *PMEASURE_RPI_REPORT;
 
-typedef union PACKED _MEASURE_REPORT_MODE
-{
-	struct PACKED
-	{
+typedef union PACKED _MEASURE_REPORT_MODE {
+	struct PACKED {
 		UINT8 Late:1;
 		UINT8 Incapable:1;
 		UINT8 Refused:1;
@@ -205,16 +181,14 @@ typedef union PACKED _MEASURE_REPORT_MODE
 	UINT8 word;
 } MEASURE_REPORT_MODE, *PMEASURE_REPORT_MODE;
 
-typedef struct PACKED _MEASURE_REPORT_INFO
-{
+typedef struct PACKED _MEASURE_REPORT_INFO {
 	UINT8 Token;
 	UINT8 ReportMode;
 	UINT8 ReportType;
 	UINT8 Octect[0];
 } MEASURE_REPORT_INFO, *PMEASURE_REPORT_INFO;
 
-typedef struct PACKED _QUIET_INFO
-{
+typedef struct PACKED _QUIET_INFO {
 	UINT8 QuietCnt;
 	UINT8 QuietPeriod;
 	UINT16 QuietDuration;
@@ -222,4 +196,3 @@ typedef struct PACKED _QUIET_INFO
 } QUIET_INFO, *PQUIET_INFO;
 
 #endif // __SPECTRUM_DEF_H__ //
-

drivers/staging/rt2860/wpa.h

@@ -126,12 +126,12 @@
 
 //#ifdef CONFIG_AP_SUPPORT
 // WPA mechanism retry timer interval
-#define PEER_MSG1_RETRY_EXEC_INTV           1000			// 1 sec
-#define PEER_MSG3_RETRY_EXEC_INTV           3000			// 3 sec
-#define GROUP_KEY_UPDATE_EXEC_INTV          1000				// 1 sec
-#define PEER_GROUP_KEY_UPDATE_INIV			2000				// 2 sec
+#define PEER_MSG1_RETRY_EXEC_INTV           1000	// 1 sec
+#define PEER_MSG3_RETRY_EXEC_INTV           3000	// 3 sec
+#define GROUP_KEY_UPDATE_EXEC_INTV          1000	// 1 sec
+#define PEER_GROUP_KEY_UPDATE_INIV			2000	// 2 sec
 
-#define ENQUEUE_EAPOL_START_TIMER			200					// 200 ms
+#define ENQUEUE_EAPOL_START_TIMER			200	// 200 ms
 
 // group rekey interval
 #define TIME_REKEY                          0
@@ -147,7 +147,6 @@
 #define AKM_SUITE					2
 #define PMKID_LIST					3
 
-
 #define EAPOL_START_DISABLE					0
 #define EAPOL_START_PSK						1
 #define EAPOL_START_1X						2
@@ -181,7 +180,6 @@
 
 #define	CONV_ARRARY_TO_UINT16(_V)	((_V[0]<<8) | (_V[1]))
 
-
 #define	ADD_ONE_To_64BIT_VAR(_V)		\
 {										\
 	UCHAR	cnt = LEN_KEY_DESC_REPLAY;	\
@@ -197,224 +195,199 @@
 #define IS_WPA_CAPABILITY(a)       (((a) >= Ndis802_11AuthModeWPA) && ((a) <= Ndis802_11AuthModeWPA1PSKWPA2PSK))
 
 // EAPOL Key Information definition within Key descriptor format
-typedef	struct PACKED _KEY_INFO
-{
-	UCHAR	KeyMic:1;
-	UCHAR	Secure:1;
-	UCHAR	Error:1;
-	UCHAR	Request:1;
-	UCHAR	EKD_DL:1;       // EKD for AP; DL for STA
-	UCHAR	Rsvd:3;
-	UCHAR	KeyDescVer:3;
-	UCHAR	KeyType:1;
-	UCHAR	KeyIndex:2;
-	UCHAR	Install:1;
-	UCHAR	KeyAck:1;
-}	KEY_INFO, *PKEY_INFO;
+typedef struct PACKED _KEY_INFO {
+	UCHAR KeyMic:1;
+	UCHAR Secure:1;
+	UCHAR Error:1;
+	UCHAR Request:1;
+	UCHAR EKD_DL:1;		// EKD for AP; DL for STA
+	UCHAR Rsvd:3;
+	UCHAR KeyDescVer:3;
+	UCHAR KeyType:1;
+	UCHAR KeyIndex:2;
+	UCHAR Install:1;
+	UCHAR KeyAck:1;
+} KEY_INFO, *PKEY_INFO;
 
 // EAPOL Key descriptor format
-typedef	struct PACKED _KEY_DESCRIPTER
-{
-	UCHAR		Type;
-	KEY_INFO	KeyInfo;
-	UCHAR		KeyLength[2];
-	UCHAR		ReplayCounter[LEN_KEY_DESC_REPLAY];
-	UCHAR		KeyNonce[LEN_KEY_DESC_NONCE];
-	UCHAR		KeyIv[LEN_KEY_DESC_IV];
-	UCHAR		KeyRsc[LEN_KEY_DESC_RSC];
-	UCHAR		KeyId[LEN_KEY_DESC_ID];
-	UCHAR		KeyMic[LEN_KEY_DESC_MIC];
-	UCHAR		KeyDataLen[2];
-	UCHAR		KeyData[MAX_LEN_OF_RSNIE];
-}	KEY_DESCRIPTER, *PKEY_DESCRIPTER;
-
-typedef	struct PACKED _EAPOL_PACKET
-{
-	UCHAR	 			ProVer;
-	UCHAR	 			ProType;
-	UCHAR	 			Body_Len[2];
-	KEY_DESCRIPTER		KeyDesc;
-}	EAPOL_PACKET, *PEAPOL_PACKET;
+typedef struct PACKED _KEY_DESCRIPTER {
+	UCHAR Type;
+	KEY_INFO KeyInfo;
+	UCHAR KeyLength[2];
+	UCHAR ReplayCounter[LEN_KEY_DESC_REPLAY];
+	UCHAR KeyNonce[LEN_KEY_DESC_NONCE];
+	UCHAR KeyIv[LEN_KEY_DESC_IV];
+	UCHAR KeyRsc[LEN_KEY_DESC_RSC];
+	UCHAR KeyId[LEN_KEY_DESC_ID];
+	UCHAR KeyMic[LEN_KEY_DESC_MIC];
+	UCHAR KeyDataLen[2];
+	UCHAR KeyData[MAX_LEN_OF_RSNIE];
+} KEY_DESCRIPTER, *PKEY_DESCRIPTER;
+
+typedef struct PACKED _EAPOL_PACKET {
+	UCHAR ProVer;
+	UCHAR ProType;
+	UCHAR Body_Len[2];
+	KEY_DESCRIPTER KeyDesc;
+} EAPOL_PACKET, *PEAPOL_PACKET;
 
 //802.11i D10 page 83
-typedef struct PACKED _GTK_ENCAP
-{
-    UCHAR               Kid:2;
-    UCHAR               tx:1;
-    UCHAR               rsv:5;
-    UCHAR               rsv1;
-    UCHAR               GTK[TKIP_GTK_LENGTH];
-}   GTK_ENCAP, *PGTK_ENCAP;
-
-typedef struct PACKED _KDE_ENCAP
-{
-    UCHAR               Type;
-    UCHAR               Len;
-    UCHAR               OUI[3];
-    UCHAR               DataType;
-    GTK_ENCAP      GTKEncap;
-}   KDE_ENCAP, *PKDE_ENCAP;
+typedef struct PACKED _GTK_ENCAP {
+	UCHAR Kid:2;
+	UCHAR tx:1;
+	UCHAR rsv:5;
+	UCHAR rsv1;
+	UCHAR GTK[TKIP_GTK_LENGTH];
+} GTK_ENCAP, *PGTK_ENCAP;
+
+typedef struct PACKED _KDE_ENCAP {
+	UCHAR Type;
+	UCHAR Len;
+	UCHAR OUI[3];
+	UCHAR DataType;
+	GTK_ENCAP GTKEncap;
+} KDE_ENCAP, *PKDE_ENCAP;
 
 // For WPA1
 typedef struct PACKED _RSNIE {
-    UCHAR   oui[4];
-    USHORT  version;
-    UCHAR   mcast[4];
-    USHORT  ucount;
-    struct PACKED {
-        UCHAR oui[4];
-    }ucast[1];
+	UCHAR oui[4];
+	USHORT version;
+	UCHAR mcast[4];
+	USHORT ucount;
+	struct PACKED {
+		UCHAR oui[4];
+	} ucast[1];
 } RSNIE, *PRSNIE;
 
 // For WPA2
 typedef struct PACKED _RSNIE2 {
-    USHORT  version;
-    UCHAR   mcast[4];
-    USHORT  ucount;
-    struct PACKED {
-        UCHAR oui[4];
-    }ucast[1];
+	USHORT version;
+	UCHAR mcast[4];
+	USHORT ucount;
+	struct PACKED {
+		UCHAR oui[4];
+	} ucast[1];
 } RSNIE2, *PRSNIE2;
 
 // AKM Suite
 typedef struct PACKED _RSNIE_AUTH {
-    USHORT acount;
-    struct PACKED {
-        UCHAR oui[4];
-    }auth[1];
-} RSNIE_AUTH,*PRSNIE_AUTH;
-
-typedef	union PACKED _RSN_CAPABILITIES	{
-	struct	PACKED {
-        USHORT		PreAuth:1;
-		USHORT		No_Pairwise:1;
-		USHORT		PTKSA_R_Counter:2;
-		USHORT		GTKSA_R_Counter:2;
-		USHORT		Rsvd:10;
-	}	field;
-	USHORT			word;
-}	RSN_CAPABILITIES, *PRSN_CAPABILITIES;
+	USHORT acount;
+	struct PACKED {
+		UCHAR oui[4];
+	} auth[1];
+} RSNIE_AUTH, *PRSNIE_AUTH;
+
+typedef union PACKED _RSN_CAPABILITIES {
+	struct PACKED {
+		USHORT PreAuth:1;
+		USHORT No_Pairwise:1;
+		USHORT PTKSA_R_Counter:2;
+		USHORT GTKSA_R_Counter:2;
+		USHORT Rsvd:10;
+	} field;
+	USHORT word;
+} RSN_CAPABILITIES, *PRSN_CAPABILITIES;
 
 typedef struct PACKED _EAP_HDR {
-    UCHAR   ProVer;
-    UCHAR   ProType;
-    UCHAR   Body_Len[2];
-    UCHAR   code;
-    UCHAR   identifier;
-    UCHAR   length[2]; // including code and identifier, followed by length-2 octets of data
+	UCHAR ProVer;
+	UCHAR ProType;
+	UCHAR Body_Len[2];
+	UCHAR code;
+	UCHAR identifier;
+	UCHAR length[2];	// including code and identifier, followed by length-2 octets of data
 } EAP_HDR, *PEAP_HDR;
 
 // For supplicant state machine states. 802.11i Draft 4.1, p. 97
 // We simplified it
-typedef	enum	_WpaState
-{
-	SS_NOTUSE,				// 0
-	SS_START,				// 1
-	SS_WAIT_MSG_3,			// 2
-	SS_WAIT_GROUP,			// 3
-	SS_FINISH,  			// 4
-	SS_KEYUPDATE,			// 5
-}	WPA_STATE;
+typedef enum _WpaState {
+	SS_NOTUSE,		// 0
+	SS_START,		// 1
+	SS_WAIT_MSG_3,		// 2
+	SS_WAIT_GROUP,		// 3
+	SS_FINISH,		// 4
+	SS_KEYUPDATE,		// 5
+} WPA_STATE;
 
 //
-//	The definition of the cipher combination
+//      The definition of the cipher combination
 //
-// 	 bit3	bit2  bit1   bit0
-//	+------------+------------+
-// 	|	  WPA	 |	   WPA2   |
-//	+------+-----+------+-----+
-//	| TKIP | AES | TKIP | AES |
-//	|	0  |  1  |   1  |  0  | -> 0x06
-//	|	0  |  1  |   1  |  1  | -> 0x07
-//	|	1  |  0  |   0  |  1  | -> 0x09
-//	|	1  |  0  |   1  |  1  | -> 0x0B
-//	|	1  |  1  |   0  |  1  | -> 0x0D
-//	|	1  |  1  |   1  |  0  | -> 0x0E
-//	|	1  |  1  |   1  |  1  |	-> 0x0F
-//	+------+-----+------+-----+
+//       bit3   bit2  bit1   bit0
+//      +------------+------------+
+//      |         WPA    |         WPA2   |
+//      +------+-----+------+-----+
+//      | TKIP | AES | TKIP | AES |
+//      |       0  |  1  |   1  |  0  | -> 0x06
+//      |       0  |  1  |   1  |  1  | -> 0x07
+//      |       1  |  0  |   0  |  1  | -> 0x09
+//      |       1  |  0  |   1  |  1  | -> 0x0B
+//      |       1  |  1  |   0  |  1  | -> 0x0D
+//      |       1  |  1  |   1  |  0  | -> 0x0E
+//      |       1  |  1  |   1  |  1  | -> 0x0F
+//      +------+-----+------+-----+
 //
-typedef	enum	_WpaMixPairCipher
-{
-	MIX_CIPHER_NOTUSE 			= 0x00,
-	WPA_NONE_WPA2_TKIPAES		= 0x03,		// WPA2-TKIPAES
-	WPA_AES_WPA2_TKIP 			= 0x06,
-	WPA_AES_WPA2_TKIPAES		= 0x07,
-	WPA_TKIP_WPA2_AES			= 0x09,
-	WPA_TKIP_WPA2_TKIPAES		= 0x0B,
-	WPA_TKIPAES_WPA2_NONE		= 0x0C,		// WPA-TKIPAES
-	WPA_TKIPAES_WPA2_AES		= 0x0D,
-	WPA_TKIPAES_WPA2_TKIP		= 0x0E,
-	WPA_TKIPAES_WPA2_TKIPAES	= 0x0F,
-}	WPA_MIX_PAIR_CIPHER;
-
-typedef struct PACKED _RSN_IE_HEADER_STRUCT	{
-	UCHAR		Eid;
-	UCHAR		Length;
-	USHORT		Version;	// Little endian format
-}	RSN_IE_HEADER_STRUCT, *PRSN_IE_HEADER_STRUCT;
+typedef enum _WpaMixPairCipher {
+	MIX_CIPHER_NOTUSE = 0x00,
+	WPA_NONE_WPA2_TKIPAES = 0x03,	// WPA2-TKIPAES
+	WPA_AES_WPA2_TKIP = 0x06,
+	WPA_AES_WPA2_TKIPAES = 0x07,
+	WPA_TKIP_WPA2_AES = 0x09,
+	WPA_TKIP_WPA2_TKIPAES = 0x0B,
+	WPA_TKIPAES_WPA2_NONE = 0x0C,	// WPA-TKIPAES
+	WPA_TKIPAES_WPA2_AES = 0x0D,
+	WPA_TKIPAES_WPA2_TKIP = 0x0E,
+	WPA_TKIPAES_WPA2_TKIPAES = 0x0F,
+} WPA_MIX_PAIR_CIPHER;
+
+typedef struct PACKED _RSN_IE_HEADER_STRUCT {
+	UCHAR Eid;
+	UCHAR Length;
+	USHORT Version;		// Little endian format
+} RSN_IE_HEADER_STRUCT, *PRSN_IE_HEADER_STRUCT;
 
 // Cipher suite selector types
-typedef struct PACKED _CIPHER_SUITE_STRUCT	{
-	UCHAR		Oui[3];
-	UCHAR		Type;
-}	CIPHER_SUITE_STRUCT, *PCIPHER_SUITE_STRUCT;
+typedef struct PACKED _CIPHER_SUITE_STRUCT {
+	UCHAR Oui[3];
+	UCHAR Type;
+} CIPHER_SUITE_STRUCT, *PCIPHER_SUITE_STRUCT;
 
 // Authentication and Key Management suite selector
-typedef struct PACKED _AKM_SUITE_STRUCT	{
-	UCHAR		Oui[3];
-	UCHAR		Type;
-}	AKM_SUITE_STRUCT, *PAKM_SUITE_STRUCT;
+typedef struct PACKED _AKM_SUITE_STRUCT {
+	UCHAR Oui[3];
+	UCHAR Type;
+} AKM_SUITE_STRUCT, *PAKM_SUITE_STRUCT;
 
 // RSN capability
-typedef struct	PACKED _RSN_CAPABILITY	{
-	USHORT		Rsv:10;
-	USHORT		GTKSAReplayCnt:2;
-	USHORT		PTKSAReplayCnt:2;
-	USHORT		NoPairwise:1;
-	USHORT		PreAuth:1;
-}	RSN_CAPABILITY, *PRSN_CAPABILITY;
-
+typedef struct PACKED _RSN_CAPABILITY {
+	USHORT Rsv:10;
+	USHORT GTKSAReplayCnt:2;
+	USHORT PTKSAReplayCnt:2;
+	USHORT NoPairwise:1;
+	USHORT PreAuth:1;
+} RSN_CAPABILITY, *PRSN_CAPABILITY;
 
 /*========================================
 	The prototype is defined in cmm_wpa.c
   ========================================*/
-BOOLEAN WpaMsgTypeSubst(
-	IN  UCHAR   EAPType,
-	OUT INT		*MsgType);
-
-VOID    PRF(
-	IN  UCHAR   *key,
-	IN  INT     key_len,
-	IN  UCHAR   *prefix,
-	IN  INT     prefix_len,
-	IN  UCHAR   *data,
-	IN  INT     data_len,
-	OUT UCHAR   *output,
-	IN  INT     len);
-
-int PasswordHash(
-	char *password,
-	unsigned char *ssid,
-	int ssidlength,
-	unsigned char *output);
-
-PUINT8	GetSuiteFromRSNIE(
-		IN	PUINT8	rsnie,
-		IN	UINT	rsnie_len,
-		IN	UINT8	type,
-		OUT	UINT8	*count);
-
-VOID WpaShowAllsuite(
-	IN	PUINT8	rsnie,
-	IN	UINT	rsnie_len);
-
-VOID RTMPInsertRSNIE(
-	IN PUCHAR pFrameBuf,
-	OUT PULONG pFrameLen,
-	IN PUINT8 rsnie_ptr,
-	IN UINT8  rsnie_len,
-	IN PUINT8 pmkid_ptr,
-	IN UINT8  pmkid_len);
+BOOLEAN WpaMsgTypeSubst(IN UCHAR EAPType, OUT INT * MsgType);
+
+VOID PRF(IN UCHAR * key,
+	 IN INT key_len,
+	 IN UCHAR * prefix,
+	 IN INT prefix_len,
+	 IN UCHAR * data, IN INT data_len, OUT UCHAR * output, IN INT len);
+
+int PasswordHash(char *password,
+		 unsigned char *ssid, int ssidlength, unsigned char *output);
+
+PUINT8 GetSuiteFromRSNIE(IN PUINT8 rsnie,
+			 IN UINT rsnie_len, IN UINT8 type, OUT UINT8 * count);
+
+VOID WpaShowAllsuite(IN PUINT8 rsnie, IN UINT rsnie_len);
 
+VOID RTMPInsertRSNIE(IN PUCHAR pFrameBuf,
+		     OUT PULONG pFrameLen,
+		     IN PUINT8 rsnie_ptr,
+		     IN UINT8 rsnie_len,
+		     IN PUINT8 pmkid_ptr, IN UINT8 pmkid_len);
 
 #endif