Merge ../linux-2.6

Documentation/dvb/bt8xx.txt

@@ -111,4 +111,8 @@ source:  linux/Documentation/video4linux/CARDLIST.bttv
 If you have problems with this please do ask on the mailing list.
 
 --
-Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham
+Authors: Richard Walker,
+	 Jamie Honan,
+	 Michael Hunold,
+	 Manu Abraham,
+	 Michael Krufky

Documentation/kernel-parameters.txt

@@ -335,6 +335,12 @@ running once the system is up.
 			timesource is not avalible, it defaults to PIT.
 			Format: { pit | tsc | cyclone | pmtmr }
 
+	disable_8254_timer
+	enable_8254_timer
+			[IA32/X86_64] Disable/Enable interrupt 0 timer routing
+			over the 8254 in addition to over the IO-APIC. The
+			kernel tries to set a sensible default.
+
 	hpet=		[IA-32,HPET] option to disable HPET and use PIT.
 			Format: disable
 
@@ -1034,6 +1040,8 @@ running once the system is up.
 
 	nomce		[IA-32] Machine Check Exception
 
+	nomca		[IA-64] Disable machine check abort handling
+
 	noresidual	[PPC] Don't use residual data on PReP machines.
 
 	noresume	[SWSUSP] Disables resume and restores original swap
@@ -1282,6 +1290,19 @@ running once the system is up.
 			New name for the ramdisk parameter.
 			See Documentation/ramdisk.txt.
 
+	rcu.blimit=	[KNL,BOOT] Set maximum number of finished
+			RCU callbacks to process in one batch.
+
+	rcu.qhimark=	[KNL,BOOT] Set threshold of queued
+			RCU callbacks over which batch limiting is disabled.
+
+	rcu.qlowmark=	[KNL,BOOT] Set threshold of queued
+			RCU callbacks below which batch limiting is re-enabled.
+
+	rcu.rsinterval=	[KNL,BOOT,SMP] Set the number of additional
+			RCU callbacks to queued before forcing reschedule
+			on all cpus.
+
 	rdinit=		[KNL]
 			Format: <full_path>
 			Run specified binary instead of /init from the ramdisk,

Documentation/video4linux/CARDLIST.saa7134

@@ -13,7 +13,7 @@
  12 -> Medion 7134                              [16be:0003]
  13 -> Typhoon TV+Radio 90031
  14 -> ELSA EX-VISION 300TV                     [1048:226b]
- 15 -> ELSA EX-VISION 500TV                     [1048:226b]
+ 15 -> ELSA EX-VISION 500TV                     [1048:226a]
  16 -> ASUS TV-FM 7134                          [1043:4842,1043:4830,1043:4840]
  17 -> AOPEN VA1000 POWER                       [1131:7133]
  18 -> BMK MPEX No Tuner
@@ -75,7 +75,7 @@
  74 -> LifeView FlyTV Platinum Mini2            [14c0:1212]
  75 -> AVerMedia AVerTVHD MCE A180              [1461:1044]
  76 -> SKNet MonsterTV Mobile                   [1131:4ee9]
- 77 -> Pinnacle PCTV 110i (saa7133)             [11bd:002e]
+ 77 -> Pinnacle PCTV 40i/50i/110i (saa7133)     [11bd:002e]
  78 -> ASUSTeK P7131 Dual                       [1043:4862]
  79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B)
  80 -> ASUS Digimatrix TV                       [1043:0210]

MAINTAINERS

@@ -838,7 +838,6 @@ S:	Maintained
 
 DVB SUBSYSTEM AND DRIVERS
 P:	LinuxTV.org Project
-M:	mchehab@infradead.org
 M:	v4l-dvb-maintainer@linuxtv.org
 L: 	linux-dvb@linuxtv.org (subscription required)
 W:	http://linuxtv.org/

arch/arm/Kconfig

@@ -78,7 +78,7 @@ menu "System Type"
 
 choice
 	prompt "ARM system type"
-	default ARCH_RPC
+	default ARCH_VERSATILE
 
 config ARCH_CLPS7500
 	bool "Cirrus-CL-PS7500FE"

arch/arm/kernel/time.c

@@ -422,12 +422,14 @@ static int timer_dyn_tick_disable(void)
 void timer_dyn_reprogram(void)
 {
 	struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
+	unsigned long next, seq;
 
-	if (dyn_tick) {
-		write_seqlock(&xtime_lock);
-		if (dyn_tick->state & DYN_TICK_ENABLED)
+	if (dyn_tick && (dyn_tick->state & DYN_TICK_ENABLED)) {
+		next = next_timer_interrupt();
+		do {
+			seq = read_seqbegin(&xtime_lock);
 			dyn_tick->reprogram(next_timer_interrupt() - jiffies);
-		write_sequnlock(&xtime_lock);
+		} while (read_seqretry(&xtime_lock, seq));
 	}
 }
 

arch/arm/mach-ixp4xx/nas100d-power.c

@@ -56,6 +56,9 @@ static int __init nas100d_power_init(void)
 
 static void __exit nas100d_power_exit(void)
 {
+	if (!(machine_is_nas100d()))
+		return;
+
 	free_irq(NAS100D_RB_IRQ, NULL);
 }
 

arch/arm/mm/tlb-v6.S

@@ -80,6 +80,7 @@ ENTRY(v6wbi_flush_kern_tlb_range)
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
+	mcr	p15, 0, r2, c7, c10, 4		@ data synchronization barrier
 	mov	pc, lr
 
 	.section ".text.init", #alloc, #execinstr

arch/h8300/kernel/process.c

@@ -45,6 +45,9 @@
 #include <asm/setup.h>
 #include <asm/pgtable.h>
 
+void (*pm_power_off)(void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
+
 asmlinkage void ret_from_fork(void);
 
 /*

arch/i386/kernel/Makefile

@@ -11,7 +11,7 @@ obj-y	:= process.o semaphore.o signal.o entry.o traps.o irq.o \
 
 obj-y				+= cpu/
 obj-y				+= timers/
-obj-$(CONFIG_ACPI)		+= acpi/
+obj-y				+= acpi/
 obj-$(CONFIG_X86_BIOS_REBOOT)	+= reboot.o
 obj-$(CONFIG_MCA)		+= mca.o
 obj-$(CONFIG_X86_MSR)		+= msr.o

arch/i386/kernel/acpi/Makefile

@@ -1,4 +1,4 @@
-obj-y				:= boot.o
+obj-$(CONFIG_ACPI)		+= boot.o
 obj-$(CONFIG_X86_IO_APIC)	+= earlyquirk.o
 obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup.o
 

arch/i386/kernel/acpi/boot.c

@@ -1111,9 +1111,6 @@ int __init acpi_boot_table_init(void)
 		disable_acpi();
 		return error;
 	}
-#ifdef __i386__
-	check_acpi_pci();
-#endif
 
 	acpi_table_parse(ACPI_BOOT, acpi_parse_sbf);
 

arch/i386/kernel/acpi/earlyquirk.c

@@ -7,14 +7,22 @@
 #include <linux/pci.h>
 #include <asm/pci-direct.h>
 #include <asm/acpi.h>
+#include <asm/apic.h>
 
 static int __init check_bridge(int vendor, int device)
 {
+#ifdef CONFIG_ACPI
 	/* According to Nvidia all timer overrides are bogus. Just ignore
 	   them all. */
 	if (vendor == PCI_VENDOR_ID_NVIDIA) {
 		acpi_skip_timer_override = 1;
 	}
+#endif
+	if (vendor == PCI_VENDOR_ID_ATI && timer_over_8254 == 1) {
+		timer_over_8254 = 0;
+		printk(KERN_INFO "ATI board detected. Disabling timer routing "
+				"over 8254.\n");
+	}
 	return 0;
 }
 

arch/i386/kernel/cpu/common.c

@@ -278,10 +278,10 @@ void __devinit generic_identify(struct cpuinfo_x86 * c)
 			c->x86_capability[4] = excap;
 			c->x86 = (tfms >> 8) & 15;
 			c->x86_model = (tfms >> 4) & 15;
-			if (c->x86 == 0xf) {
+			if (c->x86 == 0xf)
 				c->x86 += (tfms >> 20) & 0xff;
+			if (c->x86 >= 0x6)
 				c->x86_model += ((tfms >> 16) & 0xF) << 4;
-			} 
 			c->x86_mask = tfms & 15;
 		} else {
 			/* Have CPUID level 0 only - unheard of */

arch/i386/kernel/efi.c

@@ -70,10 +70,13 @@ static void efi_call_phys_prelog(void)
 {
 	unsigned long cr4;
 	unsigned long temp;
+	struct Xgt_desc_struct *cpu_gdt_descr;
 
 	spin_lock(&efi_rt_lock);
 	local_irq_save(efi_rt_eflags);
 
+	cpu_gdt_descr = &per_cpu(cpu_gdt_descr, 0);
+
 	/*
 	 * If I don't have PSE, I should just duplicate two entries in page
 	 * directory. If I have PSE, I just need to duplicate one entry in
@@ -103,18 +106,17 @@ static void efi_call_phys_prelog(void)
 	 */
 	local_flush_tlb();
 
-	per_cpu(cpu_gdt_descr, 0).address =
-				 __pa(per_cpu(cpu_gdt_descr, 0).address);
-	load_gdt((struct Xgt_desc_struct *)__pa(&per_cpu(cpu_gdt_descr, 0)));
+	cpu_gdt_descr->address = __pa(cpu_gdt_descr->address);
+	load_gdt(cpu_gdt_descr);
 }
 
 static void efi_call_phys_epilog(void)
 {
 	unsigned long cr4;
+	struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, 0);
 
-	per_cpu(cpu_gdt_descr, 0).address =
-			(unsigned long)__va(per_cpu(cpu_gdt_descr, 0).address);
-	load_gdt((struct Xgt_desc_struct *)__va(&per_cpu(cpu_gdt_descr, 0)));
+	cpu_gdt_descr->address = __va(cpu_gdt_descr->address);
+	load_gdt(cpu_gdt_descr);
 
 	cr4 = read_cr4();
 

arch/i386/kernel/io_apic.c

@@ -51,6 +51,8 @@ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
 
 static DEFINE_SPINLOCK(ioapic_lock);
 
+int timer_over_8254 __initdata = 1;
+
 /*
  *	Is the SiS APIC rmw bug present ?
  *	-1 = don't know, 0 = no, 1 = yes
@@ -2267,7 +2269,8 @@ static inline void check_timer(void)
 	apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
 	init_8259A(1);
 	timer_ack = 1;
-	enable_8259A_irq(0);
+	if (timer_over_8254 > 0)
+		enable_8259A_irq(0);
 
 	pin1  = find_isa_irq_pin(0, mp_INT);
 	apic1 = find_isa_irq_apic(0, mp_INT);
@@ -2392,6 +2395,20 @@ void __init setup_IO_APIC(void)
 		print_IO_APIC();
 }
 
+static int __init setup_disable_8254_timer(char *s)
+{
+	timer_over_8254 = -1;
+	return 1;
+}
+static int __init setup_enable_8254_timer(char *s)
+{
+	timer_over_8254 = 2;
+	return 1;
+}
+
+__setup("disable_8254_timer", setup_disable_8254_timer);
+__setup("enable_8254_timer", setup_enable_8254_timer);
+
 /*
  *	Called after all the initialization is done. If we didnt find any
  *	APIC bugs then we can allow the modify fast path

arch/i386/kernel/machine_kexec.c

@@ -116,13 +116,13 @@ static void load_segments(void)
 	__asm__ __volatile__ (
 		"\tljmp $"STR(__KERNEL_CS)",$1f\n"
 		"\t1:\n"
-		"\tmovl $"STR(__KERNEL_DS)",%eax\n"
-		"\tmovl %eax,%ds\n"
-		"\tmovl %eax,%es\n"
-		"\tmovl %eax,%fs\n"
-		"\tmovl %eax,%gs\n"
-		"\tmovl %eax,%ss\n"
-		);
+		"\tmovl $"STR(__KERNEL_DS)",%%eax\n"
+		"\tmovl %%eax,%%ds\n"
+		"\tmovl %%eax,%%es\n"
+		"\tmovl %%eax,%%fs\n"
+		"\tmovl %%eax,%%gs\n"
+		"\tmovl %%eax,%%ss\n"
+		::: "eax", "memory");
 #undef STR
 #undef __STR
 }

arch/i386/kernel/microcode.c

@@ -74,6 +74,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/sched.h>
+#include <linux/cpumask.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
@@ -250,8 +251,8 @@ static int find_matching_ucodes (void)
 			error = -EINVAL;
 			goto out;
 		}
-		
-		for (cpu_num = 0; cpu_num < num_online_cpus(); cpu_num++) {
+
+		for_each_online_cpu(cpu_num) {
 			struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
 			if (uci->err != MC_NOTFOUND) /* already found a match or not an online cpu*/
 				continue;
@@ -293,7 +294,7 @@ static int find_matching_ucodes (void)
 					error = -EFAULT;
 					goto out;
 				}
-				for (cpu_num = 0; cpu_num < num_online_cpus(); cpu_num++) {
+				for_each_online_cpu(cpu_num) {
 					struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
 					if (uci->err != MC_NOTFOUND) /* already found a match or not an online cpu*/
 						continue;
@@ -304,7 +305,9 @@ static int find_matching_ucodes (void)
 			}
 		}
 		/* now check if any cpu has matched */
-		for (cpu_num = 0, allocated_flag = 0, sum = 0; cpu_num < num_online_cpus(); cpu_num++) {
+		allocated_flag = 0;
+		sum = 0;
+		for_each_online_cpu(cpu_num) {
 			if (ucode_cpu_info[cpu_num].err == MC_MARKED) { 
 				struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
 				if (!allocated_flag) {
@@ -415,12 +418,12 @@ static int do_microcode_update (void)
 	}
 
 out_free:
-	for (i = 0; i < num_online_cpus(); i++) {
+	for_each_online_cpu(i) {
 		if (ucode_cpu_info[i].mc) {
 			int j;
 			void *tmp = ucode_cpu_info[i].mc;
 			vfree(tmp);
-			for (j = i; j < num_online_cpus(); j++) {
+			for_each_online_cpu(j) {
 				if (ucode_cpu_info[j].mc == tmp)
 					ucode_cpu_info[j].mc = NULL;
 			}

arch/i386/kernel/nmi.c

@@ -357,7 +357,7 @@ static void clear_msr_range(unsigned int base, unsigned int n)
 		wrmsr(base+i, 0, 0);
 }
 
-static inline void write_watchdog_counter(const char *descr)
+static void write_watchdog_counter(const char *descr)
 {
 	u64 count = (u64)cpu_khz * 1000;
 
@@ -544,7 +544,7 @@ void nmi_watchdog_tick (struct pt_regs * regs)
 			 * die_nmi will return ONLY if NOTIFY_STOP happens..
 			 */
 			die_nmi(regs, "NMI Watchdog detected LOCKUP");
-
+	} else {
 		last_irq_sums[cpu] = sum;
 		alert_counter[cpu] = 0;
 	}

arch/i386/kernel/setup.c

@@ -1599,6 +1599,10 @@ void __init setup_arch(char **cmdline_p)
 	if (efi_enabled)
 		efi_map_memmap();
 
+#ifdef CONFIG_X86_IO_APIC
+	check_acpi_pci();	/* Checks more than just ACPI actually */
+#endif
+
 #ifdef CONFIG_ACPI
 	/*
 	 * Parse the ACPI tables for possible boot-time SMP configuration.

arch/i386/kernel/time.c

@@ -412,9 +412,9 @@ static int timer_resume(struct sys_device *dev)
 	write_seqlock_irqsave(&xtime_lock, flags);
 	xtime.tv_sec = sec;
 	xtime.tv_nsec = 0;
-	write_sequnlock_irqrestore(&xtime_lock, flags);
-	jiffies += sleep_length;
+	jiffies_64 += sleep_length;
 	wall_jiffies += sleep_length;
+	write_sequnlock_irqrestore(&xtime_lock, flags);
 	if (last_timer->resume)
 		last_timer->resume();
 	cur_timer = last_timer;

arch/ia64/configs/bigsur_defconfig

@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1
-# Wed Sep 14 15:18:49 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:10:42 2006
 #
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -23,17 +22,18 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 # CONFIG_CPUSETS is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -42,8 +42,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -57,18 +59,37 @@ CONFIG_OBSOLETE_MODPARM=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Processor type and features
 #
 CONFIG_IA64=y
 CONFIG_64BIT=y
 CONFIG_MMU=y
+CONFIG_SWIOTLB=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
 # CONFIG_IA64_GENERIC is not set
 CONFIG_IA64_DIG=y
 # CONFIG_IA64_HP_ZX1 is not set
@@ -81,18 +102,17 @@ CONFIG_ITANIUM=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 CONFIG_IA64_PAGE_SIZE_16KB=y
 # CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_IA64_BRL_EMU=y
 CONFIG_IA64_L1_CACHE_SHIFT=6
-# CONFIG_NUMA is not set
-# CONFIG_VIRTUAL_MEM_MAP is not set
 # CONFIG_IA64_CYCLONE is not set
 CONFIG_IOSAPIC=y
-# CONFIG_IA64_SGI_SN_XP is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 # CONFIG_HOTPLUG_CPU is not set
@@ -105,7 +125,12 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+# CONFIG_VIRTUAL_MEM_MAP is not set
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
 # CONFIG_IA64_MCA_RECOVERY is not set
@@ -117,7 +142,6 @@ CONFIG_IA64_PALINFO=y
 #
 CONFIG_EFI_VARS=y
 CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 
@@ -125,6 +149,7 @@ CONFIG_BINFMT_MISC=m
 # Power management and ACPI
 #
 CONFIG_PM=y
+CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
 
 #
@@ -137,6 +162,7 @@ CONFIG_ACPI_PROCESSOR=m
 CONFIG_ACPI_THERMAL=m
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 # CONFIG_ACPI_CONTAINER is not set
@@ -173,6 +199,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -206,6 +233,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -218,14 +250,16 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -286,20 +320,13 @@ CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=m
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=m
 
 #
@@ -390,6 +417,7 @@ CONFIG_SCSI_SPI_ATTRS=m
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -399,6 +427,7 @@ CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -409,14 +438,7 @@ CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -448,6 +470,7 @@ CONFIG_DM_ZERO=m
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -486,6 +509,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -524,6 +548,7 @@ CONFIG_EEPRO100=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
@@ -630,6 +655,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_ACPI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
@@ -681,6 +707,7 @@ CONFIG_DRM_R128=m
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -731,11 +758,18 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -754,6 +788,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ASB100 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
@@ -775,6 +810,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
@@ -830,6 +866,8 @@ CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 # CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 
@@ -837,17 +875,18 @@ CONFIG_SND_PCM_OSS=m
 # Generic devices
 #
 CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
 
 #
 # PCI devices
 #
+# CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -856,38 +895,38 @@ CONFIG_SND_AC97_BUS=m
 # CONFIG_SND_AU8830 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
 CONFIG_SND_CS4281=m
+# CONFIG_SND_CS46XX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_ENS1370 is not set
 # CONFIG_SND_ENS1371 is not set
 # CONFIG_SND_ES1938 is not set
 # CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
 # CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
 
 #
 # USB devices
@@ -929,12 +968,15 @@ CONFIG_USB_UHCI_HCD=m
 # USB Device Class drivers
 #
 # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-CONFIG_USB_BLUETOOTH_TTY=m
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -946,13 +988,15 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=m
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 CONFIG_USB_HIDDEV=y
 
@@ -972,6 +1016,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -1046,7 +1091,7 @@ CONFIG_USB_MON=y
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS)
 #
 
 #
@@ -1071,6 +1116,7 @@ CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1111,6 +1157,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1153,6 +1200,7 @@ CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
 # CONFIG_CIFS_EXPERIMENTAL is not set
@@ -1179,6 +1227,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -1237,28 +1286,32 @@ CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_PENDING_IRQ=y
 
 #
-# Profiling support
+# Instrumentation Support
 #
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
+# CONFIG_KPROBES is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_KPROBES is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_IA64_GRANULE_16MB is not set
 CONFIG_IA64_GRANULE_64MB=y
 # CONFIG_IA64_PRINT_HAZARDS is not set

arch/ia64/configs/gensparse_defconfig

@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Wed Sep 28 08:27:29 2005
+# Linux kernel version: 2.6.16-rc5
+# Thu Mar  2 16:39:10 2006
 #
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -23,18 +22,19 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -43,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -58,18 +60,37 @@ CONFIG_MODVERSIONS=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Processor type and features
 #
 CONFIG_IA64=y
 CONFIG_64BIT=y
 CONFIG_MMU=y
+CONFIG_SWIOTLB=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
 CONFIG_IA64_GENERIC=y
 # CONFIG_IA64_DIG is not set
 # CONFIG_IA64_HP_ZX1 is not set
@@ -82,6 +103,8 @@ CONFIG_MCKINLEY=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 CONFIG_IA64_PAGE_SIZE_16KB=y
 # CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
@@ -105,6 +128,9 @@ CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPARSEMEM_EXTREME=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
@@ -117,13 +143,13 @@ CONFIG_COMPAT=y
 CONFIG_IA64_MCA_RECOVERY=y
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
+CONFIG_SGI_SN=y
 
 #
 # Firmware Drivers
 #
 CONFIG_EFI_VARS=y
 CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 
@@ -131,6 +157,7 @@ CONFIG_BINFMT_MISC=m
 # Power management and ACPI
 #
 CONFIG_PM=y
+CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
 
 #
@@ -145,6 +172,7 @@ CONFIG_ACPI_THERMAL=m
 CONFIG_ACPI_NUMA=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_ACPI_CONTAINER=m
@@ -187,6 +215,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -221,6 +250,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -233,8 +267,11 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -275,7 +312,13 @@ CONFIG_FW_LOADER=m
 #
 # Plug and Play support
 #
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
 
 #
 # Block devices
@@ -295,20 +338,13 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -327,6 +363,7 @@ CONFIG_BLK_DEV_IDESCSI=m
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_IDEPNP is not set
 CONFIG_BLK_DEV_IDEPCI=y
 # CONFIG_IDEPCI_SHARE_IRQ is not set
 # CONFIG_BLK_DEV_OFFBOARD is not set
@@ -400,6 +437,7 @@ CONFIG_SCSI_FC_ATTRS=y
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -409,16 +447,19 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 CONFIG_SCSI_SATA=y
 # CONFIG_SCSI_SATA_AHCI is not set
 # CONFIG_SCSI_SATA_SVW is not set
 # CONFIG_SCSI_ATA_PIIX is not set
 # CONFIG_SCSI_SATA_MV is not set
 # CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_PDC_ADMA is not set
 # CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
 # CONFIG_SCSI_SATA_SX4 is not set
 # CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIL24 is not set
 # CONFIG_SCSI_SATA_SIS is not set
 # CONFIG_SCSI_SATA_ULI is not set
 # CONFIG_SCSI_SATA_VIA is not set
@@ -436,14 +477,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -476,6 +510,7 @@ CONFIG_DM_MULTIPATH=m
 CONFIG_FUSION=y
 CONFIG_FUSION_SPI=y
 CONFIG_FUSION_FC=m
+# CONFIG_FUSION_SAS is not set
 CONFIG_FUSION_MAX_SGE=128
 # CONFIG_FUSION_CTL is not set
 
@@ -497,6 +532,7 @@ CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
 
 #
 # ARCnet devices
@@ -515,6 +551,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -564,6 +601,7 @@ CONFIG_E1000=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
@@ -668,12 +706,15 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
 # CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
@@ -689,6 +730,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_ACPI=y
 CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
@@ -738,10 +780,10 @@ CONFIG_DRM_SIS=m
 # CONFIG_DRM_VIA is not set
 # CONFIG_DRM_SAVAGE is not set
 CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
 CONFIG_HPET=y
 # CONFIG_HPET_RTC_IRQ is not set
 CONFIG_HPET_MMAP=y
-CONFIG_MAX_RAW_DEVS=256
 # CONFIG_HANGCHECK_TIMER is not set
 CONFIG_MMTIMER=y
 
@@ -749,12 +791,19 @@ CONFIG_MMTIMER=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -765,6 +814,7 @@ CONFIG_MMTIMER=y
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -815,26 +865,28 @@ CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PRINTK=y
 # CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_DRIVER=y
 
 #
 # Generic devices
 #
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
 CONFIG_SND_SERIAL_U16550=m
 CONFIG_SND_MPU401=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
 
 #
 # PCI devices
 #
+# CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -843,40 +895,40 @@ CONFIG_SND_AC97_BUS=m
 # CONFIG_SND_AU8830 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+CONFIG_SND_CS4281=m
 CONFIG_SND_CS46XX=m
 CONFIG_SND_CS46XX_NEW_DSP=y
-CONFIG_SND_CS4281=m
 CONFIG_SND_EMU10K1=m
 # CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_ENS1370 is not set
 # CONFIG_SND_ENS1371 is not set
 # CONFIG_SND_ES1938 is not set
 # CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
 CONFIG_SND_FM801=m
 # CONFIG_SND_FM801_TEA575X is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
 # CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
 
 #
 # USB devices
@@ -922,12 +974,15 @@ CONFIG_USB_UHCI_HCD=m
 # USB Device Class drivers
 #
 # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -939,12 +994,15 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=m
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
 
@@ -964,6 +1022,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -1043,6 +1102,7 @@ CONFIG_INFINIBAND_MTHCA=m
 # CONFIG_INFINIBAND_MTHCA_DEBUG is not set
 CONFIG_INFINIBAND_IPOIB=m
 # CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND_SRP is not set
 
 #
 # SN Devices
@@ -1050,6 +1110,10 @@ CONFIG_INFINIBAND_IPOIB=m
 CONFIG_SGI_IOC4=y
 CONFIG_SGI_IOC3=y
 
+#
+# EDAC - error detection and reporting (RAS)
+#
+
 #
 # File systems
 #
@@ -1079,6 +1143,7 @@ CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1120,6 +1185,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1189,6 +1255,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -1254,26 +1321,30 @@ CONFIG_GENERIC_PENDING_IRQ=y
 # CONFIG_HP_SIMSCSI is not set
 
 #
-# Profiling support
+# Instrumentation Support
 #
 # CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=20
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_KPROBES is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
 # CONFIG_IA64_PRINT_HAZARDS is not set

arch/ia64/configs/sim_defconfig

@@ -1,39 +1,52 @@
 #
 # Automatically generated make config: don't edit
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:13:41 2006
 #
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_HOTPLUG is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -43,21 +56,45 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Processor type and features
 #
 CONFIG_IA64=y
 CONFIG_64BIT=y
 CONFIG_MMU=y
+CONFIG_SWIOTLB=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
 # CONFIG_IA64_GENERIC is not set
 # CONFIG_IA64_DIG is not set
 # CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
 # CONFIG_IA64_SGI_SN2 is not set
 CONFIG_IA64_HP_SIM=y
 # CONFIG_ITANIUM is not set
@@ -66,17 +103,36 @@ CONFIG_MCKINLEY=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 # CONFIG_IA64_PAGE_SIZE_16KB is not set
 CONFIG_IA64_PAGE_SIZE_64KB=y
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
 CONFIG_IA64_L1_CACHE_SHIFT=7
-# CONFIG_MCKINLEY_ASTEP_SPECIFIC is not set
-# CONFIG_VIRTUAL_MEM_MAP is not set
 # CONFIG_IA64_CYCLONE is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
 CONFIG_SMP=y
 CONFIG_NR_CPUS=64
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_SCHED_SMT is not set
 CONFIG_PREEMPT=y
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+# CONFIG_VIRTUAL_MEM_MAP is not set
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
+# CONFIG_IA64_MCA_RECOVERY is not set
 # CONFIG_PERFMON is not set
 CONFIG_IA64_PALINFO=m
 
@@ -84,7 +140,6 @@ CONFIG_IA64_PALINFO=m
 # Firmware Drivers
 #
 CONFIG_EFI_VARS=y
-# CONFIG_SMBIOS is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 
@@ -92,6 +147,81 @@ CONFIG_BINFMT_MISC=y
 # Power management and ACPI
 #
 
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
 #
 # Device Drivers
 #
@@ -99,8 +229,16 @@ CONFIG_BINFMT_MISC=y
 #
 # Generic Driver Options
 #
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
 
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
 #
 # Memory Technology Devices (MTD)
 #
@@ -118,12 +256,16 @@ CONFIG_BINFMT_MISC=y
 #
 # Block devices
 #
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -133,6 +275,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -144,6 +287,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -157,13 +301,14 @@ CONFIG_SCSI_LOGGING=y
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
-# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_DEBUG is not set
 
 #
@@ -174,77 +319,47 @@ CONFIG_SCSI_SPI_ATTRS=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
 # I2O device support
 #
 
 #
-# Networking support
+# Network device support
 #
-CONFIG_NET=y
+# CONFIG_NETDEVICES is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
 
 #
-# Networking options
+# PHY device support
 #
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# Ethernet (10 or 100Mbit)
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
+# CONFIG_NET_ETHERNET is not set
 
 #
-# QoS and/or fair queueing
+# Ethernet (1000 Mbit)
 #
-# CONFIG_NET_SCHED is not set
 
 #
-# Network testing
+# Ethernet (10000 Mbit)
 #
-# CONFIG_NET_PKTGEN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_NETDEVICES is not set
 
 #
 # ISDN subsystem
@@ -273,16 +388,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-
 #
 # Input Device Drivers
 #
@@ -292,6 +397,15 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
 #
 # Character devices
 #
@@ -310,7 +424,6 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_QIC02_TAPE is not set
 
 #
 # IPMI
@@ -324,25 +437,52 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_EFI_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
 
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_FTAPE is not set
 # CONFIG_AGP is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
 #
 # Misc devices
 #
 
+#
+# Multimedia Capabilities Port drivers
+#
+
 #
 # Multimedia devices
 #
@@ -362,7 +502,6 @@ CONFIG_EFI_RTC=y
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 
 #
@@ -373,29 +512,54 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
 
 #
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
 
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS)
+#
+
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -406,7 +570,8 @@ CONFIG_JBD=y
 #
 # DOS/FAT/NT Filesystems
 #
-# CONFIG_FAT_FS is not set
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
 # CONFIG_NTFS_FS is not set
 
 #
@@ -415,12 +580,12 @@ CONFIG_JBD=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -448,18 +613,22 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 # CONFIG_NFSD_TCP is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -476,10 +645,10 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SOLARIS_X86_PARTITION is not set
 # CONFIG_UNIXWARE_DISKLABEL is not set
 # CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -490,8 +659,13 @@ CONFIG_EFI_PARTITION=y
 #
 # Library routines
 #
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
 
 #
 # HP Simulator drivers
@@ -502,33 +676,50 @@ CONFIG_HP_SIMSERIAL_CONSOLE=y
 CONFIG_HP_SIMSCSI=y
 
 #
-# Profiling support
+# Instrumentation Support
 #
 # CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
 
 #
 # Kernel hacking
 #
-# CONFIG_IA64_GRANULE_16MB is not set
-CONFIG_IA64_GRANULE_64MB=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_IA64_PRINT_HAZARDS is not set
-# CONFIG_DISABLE_VHPT is not set
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_IA64_GRANULE_16MB is not set
+CONFIG_IA64_GRANULE_64MB=y
+# CONFIG_IA64_PRINT_HAZARDS is not set
+# CONFIG_DISABLE_VHPT is not set
 # CONFIG_IA64_DEBUG_CMPXCHG is not set
 # CONFIG_IA64_DEBUG_IRQ is not set
-CONFIG_DEBUG_INFO=y
 CONFIG_SYSVIPC_COMPAT=y
 
 #
 # Security options
 #
+# CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 
 #
 # Cryptographic options
 #
 # CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#

arch/ia64/configs/sn2_defconfig

@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc4
-# Fri Dec  2 10:33:48 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:06:38 2006
 #
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -23,17 +22,18 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_CPUSETS=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -42,8 +42,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -88,7 +90,7 @@ CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_IA64_UNCACHED_ALLOCATOR=y
-CONFIG_ZONE_DMA_IS_DMA32=y
+CONFIG_DMA_IS_DMA32=y
 # CONFIG_IA64_GENERIC is not set
 # CONFIG_IA64_DIG is not set
 # CONFIG_IA64_HP_ZX1 is not set
@@ -126,6 +128,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
@@ -140,6 +143,7 @@ CONFIG_COMPAT=y
 CONFIG_IA64_MCA_RECOVERY=y
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
+CONFIG_SGI_SN=y
 
 #
 # Firmware Drivers
@@ -166,6 +170,7 @@ CONFIG_ACPI=y
 CONFIG_ACPI_NUMA=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 # CONFIG_ACPI_CONTAINER is not set
@@ -207,6 +212,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -247,6 +253,11 @@ CONFIG_IPV6=m
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -330,6 +341,7 @@ CONFIG_ATA_OVER_ETH=m
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -457,13 +469,7 @@ CONFIG_SCSI_SATA_VITESSE=y
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-CONFIG_SCSI_QLA22XX=y
-CONFIG_SCSI_QLA2300=y
-CONFIG_SCSI_QLA2322=y
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -545,6 +551,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
@@ -632,12 +639,15 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
 # CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
@@ -686,8 +696,8 @@ CONFIG_AGP=y
 CONFIG_AGP_SGI_TIOCA=y
 # CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=m
-# CONFIG_HPET is not set
 CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HPET is not set
 # CONFIG_HANGCHECK_TIMER is not set
 CONFIG_MMTIMER=y
 
@@ -702,6 +712,12 @@ CONFIG_MMTIMER=y
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -791,12 +807,14 @@ CONFIG_USB_UHCI_HCD=m
 # may also be needed; see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=m
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
 
@@ -816,6 +834,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -902,6 +921,10 @@ CONFIG_INFINIBAND_SRP=m
 CONFIG_SGI_IOC4=y
 CONFIG_SGI_IOC3=y
 
+#
+# EDAC - error detection and reporting (RAS)
+#
+
 #
 # File systems
 #
@@ -931,6 +954,7 @@ CONFIG_XFS_QUOTA=y
 # CONFIG_XFS_SECURITY is not set
 CONFIG_XFS_POSIX_ACL=y
 CONFIG_XFS_RT=y
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -973,6 +997,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1041,6 +1066,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -1111,19 +1137,21 @@ CONFIG_GENERIC_PENDING_IRQ=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=20
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set

arch/ia64/configs/tiger_defconfig

@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc4
-# Fri Dec  2 16:06:32 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 15:49:18 2006
 #
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -23,18 +22,19 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -43,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -88,7 +90,7 @@ CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ZONE_DMA_IS_DMA32=y
+CONFIG_DMA_IS_DMA32=y
 # CONFIG_IA64_GENERIC is not set
 CONFIG_IA64_DIG=y
 # CONFIG_IA64_HP_ZX1 is not set
@@ -162,6 +164,7 @@ CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=m
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_ACPI_CONTAINER=m
@@ -203,6 +206,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -237,6 +241,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -326,6 +335,7 @@ CONFIG_BLK_DEV_INITRD=y
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -443,13 +453,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 CONFIG_SCSI_QLOGIC_FC=y
 # CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
 CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -572,6 +576,7 @@ CONFIG_E1000=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
@@ -676,12 +681,15 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
 # CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
@@ -694,6 +702,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_ACPI=y
 CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
@@ -738,10 +747,10 @@ CONFIG_DRM_SIS=m
 # CONFIG_DRM_VIA is not set
 # CONFIG_DRM_SAVAGE is not set
 CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
 CONFIG_HPET=y
 # CONFIG_HPET_RTC_IRQ is not set
 CONFIG_HPET_MMAP=y
-CONFIG_MAX_RAW_DEVS=256
 # CONFIG_HANGCHECK_TIMER is not set
 
 #
@@ -755,6 +764,12 @@ CONFIG_MAX_RAW_DEVS=256
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -765,6 +780,7 @@ CONFIG_MAX_RAW_DEVS=256
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -854,12 +870,15 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
 # CONFIG_USB_AIPTEK is not set
@@ -873,6 +892,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -948,7 +968,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS)
 #
 
 #
@@ -980,6 +1000,7 @@ CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1021,6 +1042,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1090,6 +1112,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -1157,18 +1180,20 @@ CONFIG_GENERIC_PENDING_IRQ=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=20
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set

arch/ia64/configs/zx1_defconfig

@@ -1,16 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1
-# Wed Sep 14 15:15:01 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 15:55:36 2006
 #
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -26,17 +23,18 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 # CONFIG_CPUSETS is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -45,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -58,18 +58,37 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 # CONFIG_KMOD is not set
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Processor type and features
 #
 CONFIG_IA64=y
 CONFIG_64BIT=y
 CONFIG_MMU=y
+CONFIG_SWIOTLB=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
 # CONFIG_IA64_GENERIC is not set
 # CONFIG_IA64_DIG is not set
 CONFIG_IA64_HP_ZX1=y
@@ -82,18 +101,16 @@ CONFIG_MCKINLEY=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 CONFIG_IA64_PAGE_SIZE_16KB=y
 # CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_IA64_L1_CACHE_SHIFT=7
-# CONFIG_NUMA is not set
-CONFIG_VIRTUAL_MEM_MAP=y
-CONFIG_HOLES_IN_ZONE=y
 # CONFIG_IA64_CYCLONE is not set
 CONFIG_IOSAPIC=y
-# CONFIG_IA64_SGI_SN_XP is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
 CONFIG_SMP=y
 CONFIG_NR_CPUS=16
 # CONFIG_HOTPLUG_CPU is not set
@@ -106,7 +123,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_HOLES_IN_ZONE=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
 CONFIG_IA64_MCA_RECOVERY=y
@@ -118,7 +142,6 @@ CONFIG_IA64_PALINFO=y
 #
 CONFIG_EFI_VARS=y
 CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 
@@ -126,6 +149,7 @@ CONFIG_BINFMT_MISC=y
 # Power management and ACPI
 #
 CONFIG_PM=y
+CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
 
 #
@@ -138,6 +162,7 @@ CONFIG_ACPI_PROCESSOR=y
 CONFIG_ACPI_THERMAL=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 # CONFIG_ACPI_CONTAINER is not set
@@ -179,6 +204,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -210,15 +236,18 @@ CONFIG_TCP_CONG_BIC=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
 # CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-CONFIG_IP_NF_ARPTABLES=y
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
 
 #
 # DCCP Configuration (EXPERIMENTAL)
@@ -229,6 +258,11 @@ CONFIG_IP_NF_ARPTABLES=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -241,14 +275,16 @@ CONFIG_IP_NF_ARPTABLES=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -310,20 +346,13 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -407,13 +436,14 @@ CONFIG_SCSI_LOGGING=y
 # SCSI Transport Attributes
 #
 CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -421,13 +451,11 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_CPQFCTS is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
@@ -438,17 +466,9 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -465,6 +485,7 @@ CONFIG_SCSI_QLA2XXX=y
 CONFIG_FUSION=y
 CONFIG_FUSION_SPI=y
 CONFIG_FUSION_FC=y
+# CONFIG_FUSION_SAS is not set
 CONFIG_FUSION_MAX_SGE=128
 CONFIG_FUSION_CTL=m
 
@@ -505,6 +526,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -555,6 +577,7 @@ CONFIG_E1000=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
@@ -652,6 +675,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_ACPI=y
 CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
@@ -703,6 +727,7 @@ CONFIG_DRM_RADEON=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -753,11 +778,18 @@ CONFIG_I2C_ALGOPCF=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -789,6 +821,7 @@ CONFIG_VIDEO_DEV=y
 #
 # Video Adapters
 #
+# CONFIG_VIDEO_ADV_DEBUG is not set
 # CONFIG_VIDEO_BT848 is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_SAA5246A is not set
@@ -796,14 +829,16 @@ CONFIG_VIDEO_DEV=y
 # CONFIG_TUNER_3036 is not set
 # CONFIG_VIDEO_STRADIS is not set
 # CONFIG_VIDEO_ZORAN is not set
-# CONFIG_VIDEO_ZR36120 is not set
 # CONFIG_VIDEO_SAA7134 is not set
 # CONFIG_VIDEO_MXB is not set
 # CONFIG_VIDEO_DPC is not set
 # CONFIG_VIDEO_HEXIUM_ORION is not set
 # CONFIG_VIDEO_HEXIUM_GEMINI is not set
 # CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_EM28XX is not set
 # CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_VIDEO_AUDIO_DECODER is not set
+# CONFIG_VIDEO_DECODER is not set
 
 #
 # Radio Adapters
@@ -824,7 +859,6 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 # CONFIG_FB_MACMODES is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
@@ -833,6 +867,7 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
@@ -848,10 +883,7 @@ CONFIG_FB_RADEON_DEBUG=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -860,6 +892,7 @@ CONFIG_FB_RADEON_DEBUG=y
 CONFIG_VGA_CONSOLE=y
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -892,6 +925,8 @@ CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 
@@ -900,17 +935,18 @@ CONFIG_SND_SEQUENCER_OSS=y
 #
 CONFIG_SND_MPU401_UART=y
 CONFIG_SND_OPL3_LIB=y
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
 
 #
 # PCI devices
 #
+# CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -919,39 +955,39 @@ CONFIG_SND_AC97_BUS=y
 # CONFIG_SND_AU8830 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_ENS1370 is not set
 # CONFIG_SND_ENS1371 is not set
 # CONFIG_SND_ES1938 is not set
 # CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
 CONFIG_SND_FM801=y
 CONFIG_SND_FM801_TEA575X=y
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
 # CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
 
 #
 # USB devices
@@ -997,12 +1033,15 @@ CONFIG_USB_UHCI_HCD=y
 # USB Device Class drivers
 #
 # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1014,13 +1053,15 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 CONFIG_USB_HIDDEV=y
 # CONFIG_USB_AIPTEK is not set
@@ -1034,6 +1075,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -1049,6 +1091,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_DABUSB is not set
 # CONFIG_USB_VICAM is not set
 # CONFIG_USB_DSBR is not set
+# CONFIG_USB_ET61X251 is not set
 # CONFIG_USB_IBMCAM is not set
 # CONFIG_USB_KONICAWC is not set
 # CONFIG_USB_OV511 is not set
@@ -1113,7 +1156,7 @@ CONFIG_USB_MON=y
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS)
 #
 
 #
@@ -1135,6 +1178,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_INOTIFY is not set
@@ -1174,6 +1218,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1238,6 +1283,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -1296,26 +1342,30 @@ CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_PENDING_IRQ=y
 
 #
-# Profiling support
+# Instrumentation Support
 #
 # CONFIG_PROFILING is not set
+CONFIG_KPROBES=y
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
-CONFIG_KPROBES=y
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
 CONFIG_IA64_PRINT_HAZARDS=y

arch/ia64/defconfig

@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1
-# Wed Sep 14 15:13:03 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:02:28 2006
 #
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -23,18 +22,19 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -43,8 +43,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -58,18 +60,37 @@ CONFIG_MODVERSIONS=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Processor type and features
 #
 CONFIG_IA64=y
 CONFIG_64BIT=y
 CONFIG_MMU=y
+CONFIG_SWIOTLB=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
 CONFIG_IA64_GENERIC=y
 # CONFIG_IA64_DIG is not set
 # CONFIG_IA64_HP_ZX1 is not set
@@ -89,14 +110,10 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_IA64_L1_CACHE_SHIFT=7
-CONFIG_NUMA=y
-CONFIG_VIRTUAL_MEM_MAP=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_IA64_CYCLONE=y
 CONFIG_IOSAPIC=y
 # CONFIG_IA64_SGI_SN_XP is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
 CONFIG_SMP=y
 CONFIG_NR_CPUS=512
 CONFIG_HOTPLUG_CPU=y
@@ -110,19 +127,29 @@ CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_NUMA=y
+CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_HOLES_IN_ZONE=y
+CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
 CONFIG_IA64_MCA_RECOVERY=y
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
+CONFIG_SGI_SN=y
 
 #
 # Firmware Drivers
 #
 CONFIG_EFI_VARS=y
 CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 
@@ -130,6 +157,7 @@ CONFIG_BINFMT_MISC=m
 # Power management and ACPI
 #
 CONFIG_PM=y
+CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
 
 #
@@ -144,6 +172,7 @@ CONFIG_ACPI_THERMAL=m
 CONFIG_ACPI_NUMA=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_ACPI_CONTAINER=m
@@ -186,6 +215,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -220,6 +250,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -232,14 +267,16 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -301,20 +338,13 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -407,6 +437,7 @@ CONFIG_SCSI_FC_ATTRS=y
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -416,16 +447,19 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 CONFIG_SCSI_SATA=y
 # CONFIG_SCSI_SATA_AHCI is not set
 # CONFIG_SCSI_SATA_SVW is not set
 # CONFIG_SCSI_ATA_PIIX is not set
 # CONFIG_SCSI_SATA_MV is not set
 # CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_PDC_ADMA is not set
 # CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
 # CONFIG_SCSI_SATA_SX4 is not set
 # CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIL24 is not set
 # CONFIG_SCSI_SATA_SIS is not set
 # CONFIG_SCSI_SATA_ULI is not set
 # CONFIG_SCSI_SATA_VIA is not set
@@ -443,14 +477,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -483,6 +510,7 @@ CONFIG_DM_MULTIPATH=m
 CONFIG_FUSION=y
 CONFIG_FUSION_SPI=y
 CONFIG_FUSION_FC=m
+# CONFIG_FUSION_SAS is not set
 CONFIG_FUSION_MAX_SGE=128
 # CONFIG_FUSION_CTL is not set
 
@@ -523,6 +551,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -572,6 +601,7 @@ CONFIG_E1000=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
@@ -676,12 +706,15 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
 # CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
@@ -697,6 +730,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_ACPI=y
 CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
@@ -710,6 +744,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_SGI_L1_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_SGI_IOC4=y
+# CONFIG_SERIAL_SGI_IOC3 is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -745,10 +780,10 @@ CONFIG_DRM_SIS=m
 # CONFIG_DRM_VIA is not set
 # CONFIG_DRM_SAVAGE is not set
 CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
 CONFIG_HPET=y
 # CONFIG_HPET_RTC_IRQ is not set
 CONFIG_HPET_MMAP=y
-CONFIG_MAX_RAW_DEVS=256
 # CONFIG_HANGCHECK_TIMER is not set
 CONFIG_MMTIMER=y
 
@@ -756,12 +791,19 @@ CONFIG_MMTIMER=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
@@ -772,6 +814,7 @@ CONFIG_MMTIMER=y
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -822,26 +865,28 @@ CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PRINTK=y
 # CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_DRIVER=y
 
 #
 # Generic devices
 #
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
 CONFIG_SND_SERIAL_U16550=m
 CONFIG_SND_MPU401=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
 
 #
 # PCI devices
 #
+# CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -850,40 +895,40 @@ CONFIG_SND_AC97_BUS=m
 # CONFIG_SND_AU8830 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+CONFIG_SND_CS4281=m
 CONFIG_SND_CS46XX=m
 CONFIG_SND_CS46XX_NEW_DSP=y
-CONFIG_SND_CS4281=m
 CONFIG_SND_EMU10K1=m
 # CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_ENS1370 is not set
 # CONFIG_SND_ENS1371 is not set
 # CONFIG_SND_ES1938 is not set
 # CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
 CONFIG_SND_FM801=m
 # CONFIG_SND_FM801_TEA575X is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
 # CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
 
 #
 # USB devices
@@ -929,12 +974,15 @@ CONFIG_USB_UHCI_HCD=m
 # USB Device Class drivers
 #
 # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -946,12 +994,15 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=m
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
 
@@ -971,6 +1022,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
 
@@ -1050,11 +1102,17 @@ CONFIG_INFINIBAND_MTHCA=m
 # CONFIG_INFINIBAND_MTHCA_DEBUG is not set
 CONFIG_INFINIBAND_IPOIB=m
 # CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND_SRP is not set
 
 #
 # SN Devices
 #
 CONFIG_SGI_IOC4=y
+CONFIG_SGI_IOC3=m
+
+#
+# EDAC - error detection and reporting (RAS)
+#
 
 #
 # File systems
@@ -1085,6 +1143,7 @@ CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1126,6 +1185,7 @@ CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
 # CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1195,6 +1255,7 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
 
 #
@@ -1260,26 +1321,30 @@ CONFIG_GENERIC_PENDING_IRQ=y
 # CONFIG_HP_SIMSCSI is not set
 
 #
-# Profiling support
+# Instrumentation Support
 #
 # CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=20
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_KPROBES is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
 # CONFIG_IA64_PRINT_HAZARDS is not set

arch/ia64/kernel/cyclone.c

@@ -36,7 +36,7 @@ int __init init_cyclone_clock(void)
 	u32* volatile cyclone_timer;	/* Cyclone MPMC0 register */
 
 	if (!use_cyclone)
-		return -ENODEV;
+		return 0;
 
 	printk(KERN_INFO "Summit chipset: Starting Cyclone Counter.\n");
 

arch/ia64/kernel/fsys.S

@@ -878,8 +878,7 @@ fsyscall_table:
 	data8 0				// timer_delete
 	data8 0				// clock_settime
 	data8 fsys_clock_gettime	// clock_gettime
-	#define __NR_syscall_last	1255
 
-	.space 8*(NR_syscalls + 1024 - __NR_syscall_last), 0
-
-	.org fsyscall_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
+	// fill in zeros for the remaining entries
+	.zero:
+	.space fsyscall_table + 8*NR_syscalls - .zero, 0

arch/ia64/kernel/ivt.S

@@ -1362,7 +1362,6 @@ END(debug_vector)
 // 0x5a00 Entry 30 (size 16 bundles) Unaligned Reference (57)
 ENTRY(unaligned_access)
 	DBG_FAULT(30)
-	mov r16=cr.ipsr
 	mov r31=pr		// prepare to save predicates
 	;;
 	br.sptk.many dispatch_unaligned_handler

arch/ia64/kernel/mca_drv.c

@@ -123,8 +123,9 @@ mca_page_isolate(unsigned long paddr)
 void
 mca_handler_bh(unsigned long paddr)
 {
-	printk(KERN_DEBUG "OS_MCA: process [pid: %d](%s) encounters MCA.\n",
-		current->pid, current->comm);
+	printk(KERN_ERR
+		"OS_MCA: process [pid: %d](%s) encounters MCA (paddr=%lx)\n",
+		current->pid, current->comm, paddr);
 
 	spin_lock(&mca_bh_lock);
 	switch (mca_page_isolate(paddr)) {
@@ -132,7 +133,7 @@ mca_handler_bh(unsigned long paddr)
 		printk(KERN_DEBUG "Page isolation: ( %lx ) success.\n", paddr);
 		break;
 	case ISOLATE_NG:
-		printk(KERN_DEBUG "Page isolation: ( %lx ) failure.\n", paddr);
+		printk(KERN_CRIT "Page isolation: ( %lx ) failure.\n", paddr);
 		break;
 	default:
 		break;
@@ -567,10 +568,15 @@ recover_from_processor_error(int platform, slidx_table_t *slidx,
 		return 0;
 
 	/*
-	 * If there is no bus error, record is weird but we need not to recover.
+	 * The cache check and bus check bits have four possible states
+	 *   cc bc
+	 *    0  0	Weird record, not recovered
+	 *    1  0	Cache error, not recovered
+	 *    0  1	I/O error, attempt recovery
+	 *    1  1	Memory error, attempt recovery
 	 */
 	if (psp->bc == 0 || pbci == NULL)
-		return 1;
+		return 0;
 
 	/*
 	 * Sorry, we cannot handle so many.

arch/ia64/kernel/unaligned.c

@@ -24,7 +24,7 @@
 #include <asm/uaccess.h>
 #include <asm/unaligned.h>
 
-extern void die_if_kernel(char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn));
+extern void die_if_kernel(char *str, struct pt_regs *regs, long err);
 
 #undef DEBUG_UNALIGNED_TRAP
 
@@ -52,6 +52,15 @@ dump (const char *str, void *vp, size_t len)
 #define IA64_FIRST_ROTATING_FR	32
 #define SIGN_EXT9		0xffffffffffffff00ul
 
+/*
+ *  sysctl settable hook which tells the kernel whether to honor the
+ *  IA64_THREAD_UAC_NOPRINT prctl.  Because this is user settable, we want
+ *  to allow the super user to enable/disable this for security reasons
+ *  (i.e. don't allow attacker to fill up logs with unaligned accesses).
+ */
+int no_unaligned_warning;
+static int noprint_warning;
+
 /*
  * For M-unit:
  *
@@ -1324,8 +1333,9 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
 		if ((current->thread.flags & IA64_THREAD_UAC_SIGBUS) != 0)
 			goto force_sigbus;
 
-		if (!(current->thread.flags & IA64_THREAD_UAC_NOPRINT)
-		    && within_logging_rate_limit())
+		if (!no_unaligned_warning &&
+		    !(current->thread.flags & IA64_THREAD_UAC_NOPRINT) &&
+		    within_logging_rate_limit())
 		{
 			char buf[200];	/* comm[] is at most 16 bytes... */
 			size_t len;
@@ -1340,7 +1350,22 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
 			if (user_mode(regs))
 				tty_write_message(current->signal->tty, buf);
 			buf[len-1] = '\0';	/* drop '\r' */
-			printk(KERN_WARNING "%s", buf);	/* watch for command names containing %s */
+			/* watch for command names containing %s */
+			printk(KERN_WARNING "%s", buf);
+		} else {
+			if (no_unaligned_warning && !noprint_warning) {
+				noprint_warning = 1;
+				printk(KERN_WARNING "%s(%d) encountered an "
+				       "unaligned exception which required\n"
+				       "kernel assistance, which degrades "
+				       "the performance of the application.\n"
+				       "Unaligned exception warnings have "
+				       "been disabled by the system "
+				       "administrator\n"
+				       "echo 0 > /proc/sys/kernel/ignore-"
+				       "unaligned-usertrap to re-enable\n",
+				       current->comm, current->pid);
+			}
 		}
 	} else {
 		if (within_logging_rate_limit())

arch/ia64/pci/pci.c

@@ -579,7 +579,7 @@ pcibios_align_resource (void *data, struct resource *res,
 char * __init
 pcibios_setup (char *str)
 {
-	return NULL;
+	return str;
 }
 
 int

arch/ia64/sn/kernel/io_init.c

@@ -716,4 +716,3 @@ EXPORT_SYMBOL(sn_pci_unfixup_slot);
 EXPORT_SYMBOL(sn_pci_controller_fixup);
 EXPORT_SYMBOL(sn_bus_store_sysdata);
 EXPORT_SYMBOL(sn_bus_free_sysdata);
-EXPORT_SYMBOL(sn_pcidev_info_get);

arch/ia64/sn/kernel/sn2/sn2_smp.c

@@ -446,7 +446,7 @@ static struct proc_dir_entry *proc_sn2_ptc;
 static int __init sn2_ptc_init(void)
 {
 	if (!ia64_platform_is("sn2"))
-		return -ENOSYS;
+		return 0;
 
 	if (!(proc_sn2_ptc = create_proc_entry(PTC_BASENAME, 0444, NULL))) {
 		printk(KERN_ERR "unable to create %s proc entry", PTC_BASENAME);

arch/ia64/sn/kernel/tiocx.c

@@ -484,7 +484,7 @@ static int __init tiocx_init(void)
 	int found_tiocx_device = 0;
 
 	if (!ia64_platform_is("sn2"))
-		return -ENODEV;
+		return 0;
 
 	bus_register(&tiocx_bus_type);
 

arch/mips/kernel/time.c

@@ -163,7 +163,7 @@ void do_gettimeofday(struct timeval *tv)
 	unsigned long seq;
 	unsigned long lost;
 	unsigned long usec, sec;
-	unsigned long max_ntp_tick = tick_usec - tickadj;
+	unsigned long max_ntp_tick;
 
 	do {
 		seq = read_seqbegin(&xtime_lock);
@@ -178,12 +178,13 @@ void do_gettimeofday(struct timeval *tv)
 		 * Better to lose some accuracy than have time go backwards..
 		 */
 		if (unlikely(time_adjust < 0)) {
+			max_ntp_tick = (USEC_PER_SEC / HZ) - tickadj;
 			usec = min(usec, max_ntp_tick);
 
 			if (lost)
 				usec += lost * max_ntp_tick;
 		} else if (unlikely(lost))
-			usec += lost * tick_usec;
+			usec += lost * (USEC_PER_SEC / HZ);
 
 		sec = xtime.tv_sec;
 		usec += (xtime.tv_nsec / 1000);

arch/mips/lib/iomap.c

@@ -63,7 +63,7 @@ void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
 		return ioport_map(start, len);
 	if (flags & IORESOURCE_MEM) {
 		if (flags & IORESOURCE_CACHEABLE)
-			return ioremap_cacheable_cow(start, len);
+			return ioremap_cachable(start, len);
 		return ioremap_nocache(start, len);
 	}
 

arch/mips/mm/c-r4k.c

@@ -235,7 +235,9 @@ static inline void r4k_blast_scache_page_setup(void)
 {
 	unsigned long sc_lsize = cpu_scache_line_size();
 
-	if (sc_lsize == 16)
+	if (scache_size == 0)
+		r4k_blast_scache_page = (void *)no_sc_noop;
+	else if (sc_lsize == 16)
 		r4k_blast_scache_page = blast_scache16_page;
 	else if (sc_lsize == 32)
 		r4k_blast_scache_page = blast_scache32_page;
@@ -251,7 +253,9 @@ static inline void r4k_blast_scache_page_indexed_setup(void)
 {
 	unsigned long sc_lsize = cpu_scache_line_size();
 
-	if (sc_lsize == 16)
+	if (scache_size == 0)
+		r4k_blast_scache_page_indexed = (void *)no_sc_noop;
+	else if (sc_lsize == 16)
 		r4k_blast_scache_page_indexed = blast_scache16_page_indexed;
 	else if (sc_lsize == 32)
 		r4k_blast_scache_page_indexed = blast_scache32_page_indexed;
@@ -267,7 +271,9 @@ static inline void r4k_blast_scache_setup(void)
 {
 	unsigned long sc_lsize = cpu_scache_line_size();
 
-	if (sc_lsize == 16)
+	if (scache_size == 0)
+		r4k_blast_scache = (void *)no_sc_noop;
+	else if (sc_lsize == 16)
 		r4k_blast_scache = blast_scache16;
 	else if (sc_lsize == 32)
 		r4k_blast_scache = blast_scache32;
@@ -482,7 +488,7 @@ static inline void local_r4k_flush_icache_range(void *args)
 			protected_blast_dcache_range(start, end);
 		}
 
-		if (!cpu_icache_snoops_remote_store) {
+		if (!cpu_icache_snoops_remote_store && scache_size) {
 			if (end - start > scache_size)
 				r4k_blast_scache();
 			else
@@ -651,7 +657,7 @@ static void local_r4k_flush_cache_sigtramp(void * arg)
 
 	R4600_HIT_CACHEOP_WAR_IMPL;
 	protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
-	if (!cpu_icache_snoops_remote_store)
+	if (!cpu_icache_snoops_remote_store && scache_size)
 		protected_writeback_scache_line(addr & ~(sc_lsize - 1));
 	protected_flush_icache_line(addr & ~(ic_lsize - 1));
 	if (MIPS4K_ICACHE_REFILL_WAR) {

arch/powerpc/kernel/asm-offsets.c

@@ -92,7 +92,6 @@ int main(void)
 
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
 	DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
-	DEFINE(TI_SIGFRAME, offsetof(struct thread_info, nvgprs_frame));
 	DEFINE(TI_TASK, offsetof(struct thread_info, task));
 #ifdef CONFIG_PPC32
 	DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));

arch/powerpc/kernel/cputable.c

@@ -53,8 +53,10 @@ extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec);
 				 PPC_FEATURE_HAS_MMU)
 #define COMMON_USER_PPC64	(COMMON_USER | PPC_FEATURE_64)
 #define COMMON_USER_POWER4	(COMMON_USER_PPC64 | PPC_FEATURE_POWER4)
-#define COMMON_USER_POWER5	(COMMON_USER_PPC64 | PPC_FEATURE_POWER5)
-#define COMMON_USER_POWER5_PLUS	(COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS)
+#define COMMON_USER_POWER5	(COMMON_USER_PPC64 | PPC_FEATURE_POWER5 |\
+				 PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
+#define COMMON_USER_POWER5_PLUS	(COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS|\
+				 PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
 #define COMMON_USER_BOOKE	(PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \
 				 PPC_FEATURE_BOOKE)
 
@@ -267,7 +269,8 @@ struct cpu_spec	cpu_specs[] = {
 		.cpu_name		= "Cell Broadband Engine",
 		.cpu_features		= CPU_FTRS_CELL,
 		.cpu_user_features	= COMMON_USER_PPC64 |
-			PPC_FEATURE_CELL | PPC_FEATURE_HAS_ALTIVEC_COMP,
+			PPC_FEATURE_CELL | PPC_FEATURE_HAS_ALTIVEC_COMP |
+			PPC_FEATURE_SMT,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.cpu_setup		= __setup_cpu_be,

arch/powerpc/kernel/entry_32.S

@@ -227,7 +227,7 @@ ret_from_syscall:
 	MTMSRD(r10)
 	lwz	r9,TI_FLAGS(r12)
 	li	r8,-_LAST_ERRNO
-	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL|_TIF_RESTORE_SIGMASK)
+	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
 	bne-	syscall_exit_work
 	cmplw	0,r3,r8
 	blt+	syscall_exit_cont
@@ -287,8 +287,10 @@ syscall_dotrace:
 
 syscall_exit_work:
 	andi.	r0,r9,_TIF_RESTOREALL
-	bne-	2f
-	cmplw	0,r3,r8
+	beq+	0f
+	REST_NVGPRS(r1)
+	b	2f
+0:	cmplw	0,r3,r8
 	blt+	1f
 	andi.	r0,r9,_TIF_NOERROR
 	bne-	1f
@@ -302,9 +304,7 @@ syscall_exit_work:
 2:	andi.	r0,r9,(_TIF_PERSYSCALL_MASK)
 	beq	4f
 
-	/* Clear per-syscall TIF flags if any are set, but _leave_
-	_TIF_SAVE_NVGPRS set in r9 since we haven't dealt with that
-	yet.  */
+	/* Clear per-syscall TIF flags if any are set.  */
 
 	li	r11,_TIF_PERSYSCALL_MASK
 	addi	r12,r12,TI_FLAGS
@@ -318,8 +318,13 @@ syscall_exit_work:
 	subi	r12,r12,TI_FLAGS
 	
 4:	/* Anything which requires enabling interrupts? */
-	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SAVE_NVGPRS)
-	beq	7f
+	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
+	beq	ret_from_except
+
+	/* Re-enable interrupts */
+	ori	r10,r10,MSR_EE
+	SYNC
+	MTMSRD(r10)
 
 	/* Save NVGPRS if they're not saved already */
 	lwz	r4,_TRAP(r1)
@@ -328,71 +333,11 @@ syscall_exit_work:
 	SAVE_NVGPRS(r1)
 	li	r4,0xc00
 	stw	r4,_TRAP(r1)
-
-	/* Re-enable interrupts */
-5:	ori	r10,r10,MSR_EE
-	SYNC
-	MTMSRD(r10)
-
-	andi.	r0,r9,_TIF_SAVE_NVGPRS
-	bne	save_user_nvgprs
-
-save_user_nvgprs_cont:
-	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
-	beq	7f
-
+5:
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	do_syscall_trace_leave
-	REST_NVGPRS(r1)
-
-6:	lwz	r3,GPR3(r1)
-	LOAD_MSR_KERNEL(r10,MSR_KERNEL)	/* doesn't include MSR_EE */
-	SYNC
-	MTMSRD(r10)		/* disable interrupts again */
-	rlwinm	r12,r1,0,0,(31-THREAD_SHIFT)	/* current_thread_info() */
-	lwz	r9,TI_FLAGS(r12)
-7:
-	andi.	r0,r9,_TIF_NEED_RESCHED
-	bne	8f
-	lwz	r5,_MSR(r1)
-	andi.	r5,r5,MSR_PR
-	beq	ret_from_except
-	andi.	r0,r9,_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK
-	beq	ret_from_except
-	b	do_user_signal
-8:
-	ori	r10,r10,MSR_EE
-	SYNC
-	MTMSRD(r10)		/* re-enable interrupts */
-	bl	schedule
-	b	6b
-
-save_user_nvgprs:
-	lwz	r8,TI_SIGFRAME(r12)
-
-.macro savewords start, end
-  1:	stw \start,4*(\start)(r8)
-	.section __ex_table,"a"
-	.align	2
-	.long	1b,save_user_nvgprs_fault
-	.previous
-	.if \end - \start
-	savewords "(\start+1)",\end
-	.endif
-.endm	
-	savewords 14,31
-	b	save_user_nvgprs_cont
-
-	
-save_user_nvgprs_fault:
-	li	r3,11		/* SIGSEGV */
-	lwz	r4,TI_TASK(r12)
-	bl	force_sigsegv
+	b	ret_from_except_full
 
-	rlwinm	r12,r1,0,0,(31-THREAD_SHIFT)	/* current_thread_info() */
-	lwz	r9,TI_FLAGS(r12)
-	b	save_user_nvgprs_cont
-	
 #ifdef SHOW_SYSCALLS
 do_show_syscall:
 #ifdef SHOW_SYSCALLS_TASK
@@ -490,6 +435,14 @@ ppc_clone:
 	stw	r0,_TRAP(r1)		/* register set saved */
 	b	sys_clone
 
+	.globl	ppc_swapcontext
+ppc_swapcontext:
+	SAVE_NVGPRS(r1)
+	lwz	r0,_TRAP(r1)
+	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
+	stw	r0,_TRAP(r1)		/* register set saved */
+	b	sys_swapcontext
+
 /*
  * Top-level page fault handling.
  * This is in assembler because if do_page_fault tells us that
@@ -683,7 +636,7 @@ user_exc_return:		/* r10 contains MSR_KERNEL here */
 	/* Check current_thread_info()->flags */
 	rlwinm	r9,r1,0,0,(31-THREAD_SHIFT)
 	lwz	r9,TI_FLAGS(r9)
-	andi.	r0,r9,(_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL|_TIF_RESTORE_SIGMASK)
+	andi.	r0,r9,(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK|_TIF_NEED_RESCHED)
 	bne	do_work
 
 restore_user:

arch/powerpc/kernel/entry_64.S

@@ -159,7 +159,7 @@ syscall_exit:
 	mtmsrd	r10,1
 	ld	r9,TI_FLAGS(r12)
 	li	r11,-_LAST_ERRNO
-	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL|_TIF_SAVE_NVGPRS|_TIF_NOERROR|_TIF_RESTORE_SIGMASK)
+	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
 	bne-	syscall_exit_work
 	cmpld	r3,r11
 	ld	r5,_CCR(r1)
@@ -216,8 +216,10 @@ syscall_exit_work:
 	 If TIF_NOERROR is set, just save r3 as it is. */
 
 	andi.	r0,r9,_TIF_RESTOREALL
-	bne-	2f
-	cmpld	r3,r11		/* r10 is -LAST_ERRNO */
+	beq+	0f
+	REST_NVGPRS(r1)
+	b	2f
+0:	cmpld	r3,r11		/* r10 is -LAST_ERRNO */
 	blt+	1f
 	andi.	r0,r9,_TIF_NOERROR
 	bne-	1f
@@ -229,9 +231,7 @@ syscall_exit_work:
 2:	andi.	r0,r9,(_TIF_PERSYSCALL_MASK)
 	beq	4f
 
-	/* Clear per-syscall TIF flags if any are set, but _leave_
-	_TIF_SAVE_NVGPRS set in r9 since we haven't dealt with that
-	yet.  */
+	/* Clear per-syscall TIF flags if any are set.  */
 
 	li	r11,_TIF_PERSYSCALL_MASK
 	addi	r12,r12,TI_FLAGS
@@ -240,10 +240,9 @@ syscall_exit_work:
 	stdcx.	r10,0,r12
 	bne-	3b
 	subi	r12,r12,TI_FLAGS
-	
-4:	bl	.save_nvgprs
-	/* Anything else left to do? */
-	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SAVE_NVGPRS)
+
+4:	/* Anything else left to do? */
+	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
 	beq	.ret_from_except_lite
 
 	/* Re-enable interrupts */
@@ -251,26 +250,10 @@ syscall_exit_work:
 	ori	r10,r10,MSR_EE
 	mtmsrd	r10,1
 
-	andi.	r0,r9,_TIF_SAVE_NVGPRS
-	bne	save_user_nvgprs
-
-	/* If tracing, re-enable interrupts and do it */
-save_user_nvgprs_cont:	
-	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
-	beq	5f
-	
+	bl	.save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.do_syscall_trace_leave
-	REST_NVGPRS(r1)
-	clrrdi	r12,r1,THREAD_SHIFT
-
-	/* Disable interrupts again and handle other work if any */
-5:	mfmsr	r10
-	rldicl	r10,r10,48,1
-	rotldi	r10,r10,16
-	mtmsrd	r10,1
-
-	b	.ret_from_except_lite
+	b	.ret_from_except
 
 /* Save non-volatile GPRs, if not already saved. */
 _GLOBAL(save_nvgprs)
@@ -282,51 +265,6 @@ _GLOBAL(save_nvgprs)
 	std	r0,_TRAP(r1)
 	blr
 
-
-save_user_nvgprs:
-	ld	r10,TI_SIGFRAME(r12)
-	andi.	r0,r9,_TIF_32BIT
-	beq-	save_user_nvgprs_64
-
-	/* 32-bit save to userspace */
-
-.macro savewords start, end
-  1:	stw \start,4*(\start)(r10)
-	.section __ex_table,"a"
-	.align	3
-	.llong	1b,save_user_nvgprs_fault
-	.previous
-	.if \end - \start
-	savewords "(\start+1)",\end
-	.endif
-.endm	
-	savewords 14,31
-	b	save_user_nvgprs_cont
-
-save_user_nvgprs_64:
-	/* 64-bit save to userspace */
-
-.macro savelongs start, end
-  1:	std \start,8*(\start)(r10)
-	.section __ex_table,"a"
-	.align	3
-	.llong	1b,save_user_nvgprs_fault
-	.previous
-	.if \end - \start
-	savelongs "(\start+1)",\end
-	.endif
-.endm	
-	savelongs 14,31
-	b	save_user_nvgprs_cont
-
-save_user_nvgprs_fault:
-	li	r3,11		/* SIGSEGV */
-	ld	r4,TI_TASK(r12)
-	bl	.force_sigsegv
-
-	clrrdi	r12,r1,THREAD_SHIFT
-	ld	r9,TI_FLAGS(r12)
-	b	save_user_nvgprs_cont
 	
 /*
  * The sigsuspend and rt_sigsuspend system calls can call do_signal
@@ -352,6 +290,16 @@ _GLOBAL(ppc_clone)
 	bl	.sys_clone
 	b	syscall_exit
 
+_GLOBAL(ppc32_swapcontext)
+	bl	.save_nvgprs
+	bl	.compat_sys_swapcontext
+	b	syscall_exit
+
+_GLOBAL(ppc64_swapcontext)
+	bl	.save_nvgprs
+	bl	.sys_swapcontext
+	b	syscall_exit
+
 _GLOBAL(ret_from_fork)
 	bl	.schedule_tail
 	REST_NVGPRS(r1)

arch/powerpc/kernel/head_64.S

@@ -1544,6 +1544,9 @@ _STATIC(__boot_from_prom)
 	mr	r28,r6
 	mr	r27,r7
 
+	/* Align the stack to 16-byte boundary for broken yaboot */
+	rldicr	r1,r1,0,59
+
 	/* Make sure we are running in 64 bits mode */
 	bl	.enable_64b_mode
 

arch/powerpc/kernel/prom_init.c

@@ -978,7 +978,7 @@ static void __init prom_init_mem(void)
 			if (size == 0)
 				continue;
 			prom_debug("    %x %x\n", base, size);
-			if (base == 0)
+			if (base == 0 && (RELOC(of_platform) & PLATFORM_LPAR))
 				RELOC(rmo_top) = size;
 			if ((base + size) > RELOC(ram_top))
 				RELOC(ram_top) = base + size;

arch/powerpc/kernel/ptrace.c

@@ -561,10 +561,7 @@ void do_syscall_trace_leave(struct pt_regs *regs)
 				   regs->result);
 
 	if ((test_thread_flag(TIF_SYSCALL_TRACE)
-#ifdef CONFIG_PPC64
-	     || test_thread_flag(TIF_SINGLESTEP)
-#endif
-	     )
+	     || test_thread_flag(TIF_SINGLESTEP))
 	    && (current->ptrace & PT_PTRACED))
 		do_syscall_trace();
 }

arch/powerpc/kernel/signal_32.c

@@ -151,10 +151,7 @@ static inline int save_general_regs(struct pt_regs *regs,
 	elf_greg_t64 *gregs = (elf_greg_t64 *)regs;
 	int i;
 
-	if (!FULL_REGS(regs)) {
-		set_thread_flag(TIF_SAVE_NVGPRS);
-		current_thread_info()->nvgprs_frame = frame->mc_gregs;
-	}
+	WARN_ON(!FULL_REGS(regs));
 
 	for (i = 0; i <= PT_RESULT; i ++) {
 		if (i == 14 && !FULL_REGS(regs))
@@ -215,15 +212,7 @@ static inline int get_old_sigaction(struct k_sigaction *new_ka,
 static inline int save_general_regs(struct pt_regs *regs,
 		struct mcontext __user *frame)
 {
-	if (!FULL_REGS(regs)) {
-		/* Zero out the unsaved GPRs to avoid information
-		   leak, and set TIF_SAVE_NVGPRS to ensure that the
-		   registers do actually get saved later. */
-		memset(&regs->gpr[14], 0, 18 * sizeof(unsigned long));
-		current_thread_info()->nvgprs_frame = &frame->mc_gregs;
-		set_thread_flag(TIF_SAVE_NVGPRS);
-	}
-
+	WARN_ON(!FULL_REGS(regs));
 	return __copy_to_user(&frame->mc_gregs, regs, GP_REGS_SIZE);
 }
 
@@ -826,8 +815,8 @@ static int do_setcontext(struct ucontext __user *ucp, struct pt_regs *regs, int
 }
 
 long sys_swapcontext(struct ucontext __user *old_ctx,
-		       struct ucontext __user *new_ctx,
-		       int ctx_size, int r6, int r7, int r8, struct pt_regs *regs)
+		     struct ucontext __user *new_ctx,
+		     int ctx_size, int r6, int r7, int r8, struct pt_regs *regs)
 {
 	unsigned char tmp;
 

arch/powerpc/kernel/signal_64.c

@@ -116,14 +116,7 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 	err |= __put_user(0, &sc->v_regs);
 #endif /* CONFIG_ALTIVEC */
 	err |= __put_user(&sc->gp_regs, &sc->regs);
-	if (!FULL_REGS(regs)) {
-		/* Zero out the unsaved GPRs to avoid information
-		   leak, and set TIF_SAVE_NVGPRS to ensure that the
-		   registers do actually get saved later. */
-		memset(&regs->gpr[14], 0, 18 * sizeof(unsigned long));
-		set_thread_flag(TIF_SAVE_NVGPRS);
-		current_thread_info()->nvgprs_frame = &sc->gp_regs;
-	}
+	WARN_ON(!FULL_REGS(regs));
 	err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE);
 	err |= __copy_to_user(&sc->fp_regs, &current->thread.fpr, FP_REGS_SIZE);
 	err |= __put_user(signr, &sc->signal);

arch/powerpc/kernel/systbl.S

@@ -288,7 +288,7 @@ COMPAT_SYS(clock_settime)
 COMPAT_SYS(clock_gettime)
 COMPAT_SYS(clock_getres)
 COMPAT_SYS(clock_nanosleep)
-COMPAT_SYS(swapcontext)
+SYSX(ppc64_swapcontext,ppc32_swapcontext,ppc_swapcontext)
 COMPAT_SYS(tgkill)
 COMPAT_SYS(utimes)
 COMPAT_SYS(statfs64)

arch/powerpc/kernel/traps.c

@@ -814,6 +814,8 @@ void __kprobes program_check_exception(struct pt_regs *regs)
 		return;
 	}
 
+	local_irq_enable();
+
 	/* Try to emulate it if we should. */
 	if (reason & (REASON_ILLEGAL | REASON_PRIVILEGED)) {
 		switch (emulate_instruction(regs)) {

arch/powerpc/kernel/vdso.c

@@ -180,8 +180,8 @@ static struct page * vdso_vma_nopage(struct vm_area_struct * vma,
 	unsigned long offset = address - vma->vm_start;
 	struct page *pg;
 #ifdef CONFIG_PPC64
-	void *vbase = test_thread_flag(TIF_32BIT) ?
-		vdso32_kbase : vdso64_kbase;
+	void *vbase = (vma->vm_mm->task_size > TASK_SIZE_USER32) ?
+		vdso64_kbase : vdso32_kbase;
 #else
 	void *vbase = vdso32_kbase;
 #endif

arch/powerpc/platforms/powermac/pfunc_base.c

@@ -9,7 +9,12 @@
 #include <asm/pmac_feature.h>
 #include <asm/pmac_pfunc.h>
 
+#undef DEBUG
+#ifdef DEBUG
 #define DBG(fmt...)	printk(fmt)
+#else
+#define DBG(fmt...)
+#endif
 
 static irqreturn_t macio_gpio_irq(int irq, void *data, struct pt_regs *regs)
 {

arch/powerpc/platforms/powermac/pfunc_core.c

@@ -20,7 +20,13 @@
 #define LOG_PARSE(fmt...)
 #define LOG_ERROR(fmt...)	printk(fmt)
 #define LOG_BLOB(t,b,c)
+
+#undef DEBUG
+#ifdef DEBUG
 #define DBG(fmt...)		printk(fmt)
+#else
+#define DBG(fmt...)
+#endif
 
 /* Command numbers */
 #define PMF_CMD_LIST			0

arch/powerpc/platforms/powermac/smp.c

@@ -435,7 +435,7 @@ struct smp_ops_t psurge_smp_ops = {
  */
 
 static void (*pmac_tb_freeze)(int freeze);
-static unsigned long timebase;
+static u64 timebase;
 static int tb_req;
 
 static void smp_core99_give_timebase(void)

arch/ppc/kernel/asm-offsets.c

@@ -131,7 +131,6 @@ main(void)
 	DEFINE(CPU_SPEC_FEATURES, offsetof(struct cpu_spec, cpu_features));
 	DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup));
 
-	DEFINE(TI_SIGFRAME, offsetof(struct thread_info, nvgprs_frame));
 	DEFINE(TI_TASK, offsetof(struct thread_info, task));
 	DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));

arch/ppc/kernel/entry.S

@@ -227,7 +227,7 @@ ret_from_syscall:
 	MTMSRD(r10)
 	lwz	r9,TI_FLAGS(r12)
 	li	r8,-_LAST_ERRNO
-	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL)
+	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
 	bne-	syscall_exit_work
 	cmplw	0,r3,r8
 	blt+	syscall_exit_cont
@@ -287,8 +287,10 @@ syscall_dotrace:
 
 syscall_exit_work:
 	andi.	r0,r9,_TIF_RESTOREALL
-	bne-	2f
-	cmplw	0,r3,r8
+	beq+	0f
+	REST_NVGPRS(r1)
+	b	2f
+0:	cmplw	0,r3,r8
 	blt+	1f
 	andi.	r0,r9,_TIF_NOERROR
 	bne-	1f
@@ -302,9 +304,7 @@ syscall_exit_work:
 2:	andi.	r0,r9,(_TIF_PERSYSCALL_MASK)
 	beq	4f
 
-	/* Clear per-syscall TIF flags if any are set, but _leave_
-	_TIF_SAVE_NVGPRS set in r9 since we haven't dealt with that
-	yet.  */
+	/* Clear per-syscall TIF flags if any are set.  */
 
 	li	r11,_TIF_PERSYSCALL_MASK
 	addi	r12,r12,TI_FLAGS
@@ -318,8 +318,13 @@ syscall_exit_work:
 	subi	r12,r12,TI_FLAGS
 	
 4:	/* Anything which requires enabling interrupts? */
-	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SAVE_NVGPRS)
-	beq	7f
+	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
+	beq	ret_from_except
+
+	/* Re-enable interrupts */
+	ori	r10,r10,MSR_EE
+	SYNC
+	MTMSRD(r10)
 
 	/* Save NVGPRS if they're not saved already */
 	lwz	r4,TRAP(r1)
@@ -328,71 +333,11 @@ syscall_exit_work:
 	SAVE_NVGPRS(r1)
 	li	r4,0xc00
 	stw	r4,TRAP(r1)
-
-	/* Re-enable interrupts */
-5:	ori	r10,r10,MSR_EE
-	SYNC
-	MTMSRD(r10)
-
-	andi.	r0,r9,_TIF_SAVE_NVGPRS
-	bne	save_user_nvgprs
-
-save_user_nvgprs_cont:
-	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
-	beq	7f
-
+5:
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	do_syscall_trace_leave
-	REST_NVGPRS(r1)
-
-6:	lwz	r3,GPR3(r1)
-	LOAD_MSR_KERNEL(r10,MSR_KERNEL)	/* doesn't include MSR_EE */
-	SYNC
-	MTMSRD(r10)		/* disable interrupts again */
-	rlwinm	r12,r1,0,0,18	/* current_thread_info() */
-	lwz	r9,TI_FLAGS(r12)
-7:
-	andi.	r0,r9,_TIF_NEED_RESCHED
-	bne	8f
-	lwz	r5,_MSR(r1)
-	andi.	r5,r5,MSR_PR
-	beq	ret_from_except
-	andi.	r0,r9,_TIF_SIGPENDING
-	beq	ret_from_except
-	b	do_user_signal
-8:
-	ori	r10,r10,MSR_EE
-	SYNC
-	MTMSRD(r10)		/* re-enable interrupts */
-	bl	schedule
-	b	6b
-
-save_user_nvgprs:
-	lwz	r8,TI_SIGFRAME(r12)
-
-.macro savewords start, end
-  1:	stw \start,4*(\start)(r8)
-	.section __ex_table,"a"
-	.align	2
-	.long	1b,save_user_nvgprs_fault
-	.previous
-	.if \end - \start
-	savewords "(\start+1)",\end
-	.endif
-.endm	
-	savewords 14,31
-	b	save_user_nvgprs_cont
-
-	
-save_user_nvgprs_fault:
-	li	r3,11		/* SIGSEGV */
-	lwz	r4,TI_TASK(r12)
-	bl	force_sigsegv
+	b	ret_from_except_full
 
-	rlwinm	r12,r1,0,0,18	/* current_thread_info() */
-	lwz	r9,TI_FLAGS(r12)
-	b	save_user_nvgprs_cont
-	
 #ifdef SHOW_SYSCALLS
 do_show_syscall:
 #ifdef SHOW_SYSCALLS_TASK
@@ -490,6 +435,14 @@ ppc_clone:
 	stw	r0,TRAP(r1)		/* register set saved */
 	b	sys_clone
 
+	.globl	ppc_swapcontext
+ppc_swapcontext:
+	SAVE_NVGPRS(r1)
+	lwz	r0,TRAP(r1)
+	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
+	stw	r0,TRAP(r1)		/* register set saved */
+	b	sys_swapcontext
+
 /*
  * Top-level page fault handling.
  * This is in assembler because if do_page_fault tells us that
@@ -683,7 +636,7 @@ user_exc_return:		/* r10 contains MSR_KERNEL here */
 	/* Check current_thread_info()->flags */
 	rlwinm	r9,r1,0,0,18
 	lwz	r9,TI_FLAGS(r9)
-	andi.	r0,r9,(_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL)
+	andi.	r0,r9,(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK|_TIF_NEED_RESCHED)
 	bne	do_work
 
 restore_user:

arch/s390/lib/uaccess.S

@@ -198,12 +198,12 @@ __strnlen_user_asm:
 0:	srst	%r2,%r1
 	jo	0b
 	sacf	0
-	jh	1f		# \0 found in string ?
 	ahi	%r2,1		# strnlen_user result includes the \0
-1:	slr	%r2,%r3
+				# or return count+1 if \0 not found
+	slr	%r2,%r3
 	br	%r14
 2:	sacf	0
-	lhi	%r2,-EFAULT
+	slr	%r2,%r2		# return 0 on exception
 	br	%r14
 	.section __ex_table,"a"
 	.long	0b,2b

arch/s390/lib/uaccess64.S

@@ -194,12 +194,12 @@ __strnlen_user_asm:
 0:	srst	%r2,%r1
 	jo	0b
 	sacf	0
-	jh	1f		# \0 found in string ?
 	aghi	%r2,1		# strnlen_user result includes the \0
-1:	slgr	%r2,%r3
+				# or return count+1 if \0 not found
+	slgr	%r2,%r3
 	br	%r14
 2:	sacf	0
-	lghi	%r2,-EFAULT
+	slgr	%r2,%r2		# return 0 on exception
 	br	%r14
 	.section __ex_table,"a"
 	.quad	0b,2b

arch/sparc64/kernel/sys32.S

@@ -318,7 +318,7 @@ do_sys_recvmsg: /* compat_sys_recvmsg(int, struct compat_msghdr *, unsigned int)
 	nop
 	nop
 
-	.section	__ex_table
+	.section	__ex_table,"a"
 	.align		4
 	.word		1b, __retl_efault, 2b, __retl_efault
 	.word		3b, __retl_efault, 4b, __retl_efault

arch/sparc64/kernel/una_asm.S

@@ -47,7 +47,7 @@ __do_int_store:
 	 mov	0, %o0
 	.size	__do_int_store, .-__do_int_store
 
-	.section	__ex_table
+	.section	__ex_table,"a"
 	.word		4b, __retl_efault
 	.word		5b, __retl_efault
 	.word		6b, __retl_efault
@@ -129,7 +129,7 @@ do_int_load:
 	 mov	0, %o0
 	.size	__do_int_load, .-__do_int_load
 
-	.section	__ex_table
+	.section	__ex_table,"a"
 	.word		4b, __retl_efault
 	.word		5b, __retl_efault
 	.word		6b, __retl_efault

arch/sparc64/lib/U1copy_from_user.S

@@ -9,7 +9,7 @@
 	.align 4;		\
 99:	retl;			\
 	 mov	1, %o0;		\
-	.section __ex_table;	\
+	.section __ex_table,"a";\
 	.align 4;		\
 	.word 98b, 99b;		\
 	.text;			\

arch/sparc64/lib/U1copy_to_user.S

@@ -9,7 +9,7 @@
 	.align 4;		\
 99:	retl;			\
 	 mov	1, %o0;		\
-	.section __ex_table;	\
+	.section __ex_table,"a";\
 	.align 4;		\
 	.word 98b, 99b;		\
 	.text;			\

arch/sparc64/lib/U3copy_from_user.S

@@ -9,7 +9,7 @@
 	.align 4;		\
 99:	retl;			\
 	 mov	1, %o0;		\
-	.section __ex_table;	\
+	.section __ex_table,"a";\
 	.align 4;		\
 	.word 98b, 99b;		\
 	.text;			\

arch/sparc64/lib/U3copy_to_user.S

@@ -9,7 +9,7 @@
 	.align 4;		\
 99:	retl;			\
 	 mov	1, %o0;		\
-	.section __ex_table;	\
+	.section __ex_table,"a";\
 	.align 4;		\
 	.word 98b, 99b;		\
 	.text;			\

arch/sparc64/lib/bzero.S

@@ -92,7 +92,7 @@ __bzero_done:
 	.align 4;		\
 99:	retl;			\
 	 mov	%o1, %o0;	\
-	.section __ex_table;	\
+	.section __ex_table,"a";\
 	.align 4;		\
 	.word 98b, 99b;		\
 	.text;			\

arch/sparc64/lib/copy_in_user.S

@@ -13,7 +13,7 @@
 	.align 4;		\
 99:	retl;			\
 	 mov 1, %o0;		\
-	.section __ex_table;	\
+	.section __ex_table,"a";\
 	.align 4;		\
 	.word 98b, 99b;		\
 	.text;			\

arch/sparc64/lib/csum_copy_from_user.S

@@ -9,7 +9,7 @@
 	.align 4;		\
 99:	retl;			\
 	 mov	-1, %o0;	\
-	.section __ex_table;	\
+	.section __ex_table,"a";\
 	.align 4;		\
 	.word 98b, 99b;		\
 	.text;			\

arch/sparc64/lib/csum_copy_to_user.S

@@ -9,7 +9,7 @@
 	.align 4;		\
 99:	retl;			\
 	 mov	-1, %o0;	\
-	.section __ex_table;	\
+	.section __ex_table,"a";\
 	.align 4;		\
 	.word 98b, 99b;		\
 	.text;			\

arch/sparc64/lib/strlen_user.S

@@ -85,7 +85,7 @@ __strnlen_user:
         retl
          clr    %o0
 
-	.section __ex_table,#alloc
+	.section __ex_table,"a"
 	.align	4
 
 	.word	10b, 30b

arch/sparc64/lib/strncpy_from_user.S

@@ -125,7 +125,7 @@ __strncpy_from_user:
 	 add	%o2, %o3, %o0
 	.size	__strncpy_from_user, .-__strncpy_from_user
 
-	.section __ex_table,#alloc
+	.section __ex_table,"a"
 	.align	4
 	.word	60b, __retl_efault
 	.word	61b, __retl_efault

arch/sparc64/solaris/entry64.S

@@ -217,7 +217,7 @@ solaris_unimplemented:
 	ba,pt		%xcc, ret_from_solaris
 	 nop
 
-	.section	__ex_table,#alloc
+	.section	__ex_table,"a"
 	.align		4
 	.word		exen, exenf
 

arch/v850/kernel/process.c

@@ -30,6 +30,9 @@
 #include <asm/system.h>
 #include <asm/pgtable.h>
 
+void (*pm_power_off)(void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
+
 extern void ret_from_fork (void);
 
 

arch/x86_64/kernel/machine_kexec.c

@@ -140,7 +140,7 @@ static void load_segments(void)
 		"\tmovl %0,%%ss\n"
 		"\tmovl %0,%%fs\n"
 		"\tmovl %0,%%gs\n"
-		: : "a" (__KERNEL_DS)
+		: : "a" (__KERNEL_DS) : "memory"
 		);
 }
 

arch/xtensa/kernel/process.c

@@ -64,6 +64,9 @@ EXPORT_SYMBOL(init_task);
 
 struct task_struct *current_set[NR_CPUS] = {&init_task, };
 
+void (*pm_power_off)(void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
+
 
 #if XCHAL_CP_NUM > 0
 

block/cfq-iosched.c

@@ -239,7 +239,6 @@ enum cfqq_state_flags {
 	CFQ_CFQQ_FLAG_fifo_expire,
 	CFQ_CFQQ_FLAG_idle_window,
 	CFQ_CFQQ_FLAG_prio_changed,
-	CFQ_CFQQ_FLAG_expired,
 };
 
 #define CFQ_CFQQ_FNS(name)						\
@@ -264,7 +263,6 @@ CFQ_CFQQ_FNS(must_dispatch);
 CFQ_CFQQ_FNS(fifo_expire);
 CFQ_CFQQ_FNS(idle_window);
 CFQ_CFQQ_FNS(prio_changed);
-CFQ_CFQQ_FNS(expired);
 #undef CFQ_CFQQ_FNS
 
 enum cfq_rq_state_flags {
@@ -336,7 +334,7 @@ static struct request *cfq_find_rq_hash(struct cfq_data *cfqd, sector_t offset)
  */
 static inline void cfq_schedule_dispatch(struct cfq_data *cfqd)
 {
-	if (!cfqd->rq_in_driver && cfqd->busy_queues)
+	if (cfqd->busy_queues)
 		kblockd_schedule_work(&cfqd->unplug_work);
 }
 
@@ -736,12 +734,62 @@ __cfq_set_active_queue(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 		cfqq->slice_left = 0;
 		cfq_clear_cfqq_must_alloc_slice(cfqq);
 		cfq_clear_cfqq_fifo_expire(cfqq);
-		cfq_clear_cfqq_expired(cfqq);
 	}
 
 	cfqd->active_queue = cfqq;
 }
 
+/*
+ * current cfqq expired its slice (or was too idle), select new one
+ */
+static void
+__cfq_slice_expired(struct cfq_data *cfqd, struct cfq_queue *cfqq,
+		    int preempted)
+{
+	unsigned long now = jiffies;
+
+	if (cfq_cfqq_wait_request(cfqq))
+		del_timer(&cfqd->idle_slice_timer);
+
+	if (!preempted && !cfq_cfqq_dispatched(cfqq)) {
+		cfqq->service_last = now;
+		cfq_schedule_dispatch(cfqd);
+	}
+
+	cfq_clear_cfqq_must_dispatch(cfqq);
+	cfq_clear_cfqq_wait_request(cfqq);
+
+	/*
+	 * store what was left of this slice, if the queue idled out
+	 * or was preempted
+	 */
+	if (time_after(cfqq->slice_end, now))
+		cfqq->slice_left = cfqq->slice_end - now;
+	else
+		cfqq->slice_left = 0;
+
+	if (cfq_cfqq_on_rr(cfqq))
+		cfq_resort_rr_list(cfqq, preempted);
+
+	if (cfqq == cfqd->active_queue)
+		cfqd->active_queue = NULL;
+
+	if (cfqd->active_cic) {
+		put_io_context(cfqd->active_cic->ioc);
+		cfqd->active_cic = NULL;
+	}
+
+	cfqd->dispatch_slice = 0;
+}
+
+static inline void cfq_slice_expired(struct cfq_data *cfqd, int preempted)
+{
+	struct cfq_queue *cfqq = cfqd->active_queue;
+
+	if (cfqq)
+		__cfq_slice_expired(cfqd, cfqq, preempted);
+}
+
 /*
  * 0
  * 0,1
@@ -801,16 +849,7 @@ static int cfq_get_next_prio_level(struct cfq_data *cfqd)
 
 static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd)
 {
-	struct cfq_queue *cfqq;
-
-	/*
-	 * if current queue is expired but not done with its requests yet,
-	 * wait for that to happen
-	 */
-	if ((cfqq = cfqd->active_queue) != NULL) {
-		if (cfq_cfqq_expired(cfqq) && cfq_cfqq_dispatched(cfqq))
-			return NULL;
-	}
+	struct cfq_queue *cfqq = NULL;
 
 	/*
 	 * if current list is non-empty, grab first entry. if it is empty,
@@ -837,66 +876,11 @@ static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd)
 	return cfqq;
 }
 
-/*
- * current cfqq expired its slice (or was too idle), select new one
- */
-static void
-__cfq_slice_expired(struct cfq_data *cfqd, struct cfq_queue *cfqq,
-		    int preempted)
-{
-	unsigned long now = jiffies;
-
-	if (cfq_cfqq_wait_request(cfqq))
-		del_timer(&cfqd->idle_slice_timer);
-
-	if (!preempted && !cfq_cfqq_dispatched(cfqq))
-		cfqq->service_last = now;
-
-	cfq_clear_cfqq_must_dispatch(cfqq);
-	cfq_clear_cfqq_wait_request(cfqq);
-
-	/*
-	 * store what was left of this slice, if the queue idled out
-	 * or was preempted
-	 */
-	if (time_after(cfqq->slice_end, now))
-		cfqq->slice_left = cfqq->slice_end - now;
-	else
-		cfqq->slice_left = 0;
-
-	if (cfq_cfqq_on_rr(cfqq))
-		cfq_resort_rr_list(cfqq, preempted);
-
-	if (cfqq == cfqd->active_queue)
-		cfqd->active_queue = NULL;
-
-	if (cfqd->active_cic) {
-		put_io_context(cfqd->active_cic->ioc);
-		cfqd->active_cic = NULL;
-	}
-
-	cfqd->dispatch_slice = 0;
-}
-
-static inline void cfq_slice_expired(struct cfq_data *cfqd, int preempted)
-{
-	struct cfq_queue *cfqq = cfqd->active_queue;
-
-	if (cfqq) {
-		/*
-		 * use deferred expiry, if there are requests in progress as
-		 * not to disturb the slice of the next queue
-		 */
-		if (cfq_cfqq_dispatched(cfqq))
-			cfq_mark_cfqq_expired(cfqq);
-		else
-			__cfq_slice_expired(cfqd, cfqq, preempted);
-	}
-}
-
 static int cfq_arm_slice_timer(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 
 {
+	unsigned long sl;
+
 	WARN_ON(!RB_EMPTY(&cfqq->sort_list));
 	WARN_ON(cfqq != cfqd->active_queue);
 
@@ -916,13 +900,8 @@ static int cfq_arm_slice_timer(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 	cfq_mark_cfqq_must_dispatch(cfqq);
 	cfq_mark_cfqq_wait_request(cfqq);
 
-	if (!timer_pending(&cfqd->idle_slice_timer)) {
-		unsigned long slice_left = min(cfqq->slice_end - 1, (unsigned long) cfqd->cfq_slice_idle);
-
-		cfqd->idle_slice_timer.expires = jiffies + slice_left;
-		add_timer(&cfqd->idle_slice_timer);
-	}
-
+	sl = min(cfqq->slice_end - 1, (unsigned long) cfqd->cfq_slice_idle);
+	mod_timer(&cfqd->idle_slice_timer, jiffies + sl);
 	return 1;
 }
 
@@ -1006,9 +985,6 @@ static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd)
 	if (!cfqq)
 		goto new_queue;
 
-	if (cfq_cfqq_expired(cfqq))
-		goto new_queue;
-
 	/*
 	 * slice has expired
 	 */
@@ -1181,10 +1157,8 @@ static void cfq_put_queue(struct cfq_queue *cfqq)
 	BUG_ON(cfqq->allocated[READ] + cfqq->allocated[WRITE]);
 	BUG_ON(cfq_cfqq_on_rr(cfqq));
 
-	if (unlikely(cfqd->active_queue == cfqq)) {
+	if (unlikely(cfqd->active_queue == cfqq))
 		__cfq_slice_expired(cfqd, cfqq, 0);
-		cfq_schedule_dispatch(cfqd);
-	}
 
 	cfq_put_cfqd(cfqq->cfqd);
 
@@ -1245,10 +1219,8 @@ static void cfq_exit_single_io_context(struct cfq_io_context *cic)
 
 	spin_lock(q->queue_lock);
 
-	if (unlikely(cic->cfqq == cfqd->active_queue)) {
+	if (unlikely(cic->cfqq == cfqd->active_queue))
 		__cfq_slice_expired(cfqd, cic->cfqq, 0);
-		cfq_schedule_dispatch(cfqd);
-	}
 
 	cfq_put_queue(cic->cfqq);
 	cic->cfqq = NULL;
@@ -1715,10 +1687,7 @@ static void cfq_completed_request(request_queue_t *q, struct request *rq)
 			cfqq->service_last = now;
 			cfq_resort_rr_list(cfqq, 0);
 		}
-		if (cfq_cfqq_expired(cfqq)) {
-			__cfq_slice_expired(cfqd, cfqq, 0);
-			cfq_schedule_dispatch(cfqd);
-		}
+		cfq_schedule_dispatch(cfqd);
 	}
 
 	if (cfq_crq_is_sync(crq))

block/ll_rw_blk.c

@@ -625,26 +625,31 @@ static inline int ordered_bio_endio(struct request *rq, struct bio *bio,
  *    Different hardware can have different requirements as to what pages
  *    it can do I/O directly to. A low level driver can call
  *    blk_queue_bounce_limit to have lower memory pages allocated as bounce
- *    buffers for doing I/O to pages residing above @page. By default
- *    the block layer sets this to the highest numbered "low" memory page.
+ *    buffers for doing I/O to pages residing above @page.
  **/
 void blk_queue_bounce_limit(request_queue_t *q, u64 dma_addr)
 {
 	unsigned long bounce_pfn = dma_addr >> PAGE_SHIFT;
-
-	/*
-	 * set appropriate bounce gfp mask -- unfortunately we don't have a
-	 * full 4GB zone, so we have to resort to low memory for any bounces.
-	 * ISA has its own < 16MB zone.
-	 */
-	if (bounce_pfn < blk_max_low_pfn) {
-		BUG_ON(dma_addr < BLK_BOUNCE_ISA);
+	int dma = 0;
+
+	q->bounce_gfp = GFP_NOIO;
+#if BITS_PER_LONG == 64
+	/* Assume anything <= 4GB can be handled by IOMMU.
+	   Actually some IOMMUs can handle everything, but I don't
+	   know of a way to test this here. */
+	if (bounce_pfn < (0xffffffff>>PAGE_SHIFT))
+		dma = 1;
+	q->bounce_pfn = max_low_pfn;
+#else
+	if (bounce_pfn < blk_max_low_pfn)
+		dma = 1;
+	q->bounce_pfn = bounce_pfn;
+#endif
+	if (dma) {
 		init_emergency_isa_pool();
 		q->bounce_gfp = GFP_NOIO | GFP_DMA;
-	} else
-		q->bounce_gfp = GFP_NOIO;
-
-	q->bounce_pfn = bounce_pfn;
+		q->bounce_pfn = bounce_pfn;
+	}
 }
 
 EXPORT_SYMBOL(blk_queue_bounce_limit);

drivers/atm/fore200e.c

@@ -555,7 +555,7 @@ fore200e_pca_reset(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_pca_map(struct fore200e* fore200e)
 {
     DPRINTK(2, "device %s being mapped in memory\n", fore200e->name);
@@ -589,7 +589,7 @@ fore200e_pca_unmap(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_pca_configure(struct fore200e* fore200e)
 {
     struct pci_dev* pci_dev = (struct pci_dev*)fore200e->bus_dev;
@@ -2125,7 +2125,7 @@ fore200e_change_qos(struct atm_vcc* vcc,struct atm_qos* qos, int flags)
 }
     
 
-static int __init
+static int __devinit
 fore200e_irq_request(struct fore200e* fore200e)
 {
     if (request_irq(fore200e->irq, fore200e_interrupt, SA_SHIRQ, fore200e->name, fore200e->atm_dev) < 0) {
@@ -2148,7 +2148,7 @@ fore200e_irq_request(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_get_esi(struct fore200e* fore200e)
 {
     struct prom_data* prom = fore200e_kmalloc(sizeof(struct prom_data), GFP_KERNEL | GFP_DMA);
@@ -2180,7 +2180,7 @@ fore200e_get_esi(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_alloc_rx_buf(struct fore200e* fore200e)
 {
     int scheme, magn, nbr, size, i;
@@ -2245,7 +2245,7 @@ fore200e_alloc_rx_buf(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_init_bs_queue(struct fore200e* fore200e)
 {
     int scheme, magn, i;
@@ -2308,7 +2308,7 @@ fore200e_init_bs_queue(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_init_rx_queue(struct fore200e* fore200e)
 {
     struct host_rxq*     rxq =  &fore200e->host_rxq;
@@ -2368,7 +2368,7 @@ fore200e_init_rx_queue(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_init_tx_queue(struct fore200e* fore200e)
 {
     struct host_txq*     txq =  &fore200e->host_txq;
@@ -2431,7 +2431,7 @@ fore200e_init_tx_queue(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_init_cmd_queue(struct fore200e* fore200e)
 {
     struct host_cmdq*     cmdq =  &fore200e->host_cmdq;
@@ -2487,7 +2487,7 @@ fore200e_param_bs_queue(struct fore200e* fore200e,
 }
 
 
-static int __init
+static int __devinit
 fore200e_initialize(struct fore200e* fore200e)
 {
     struct cp_queues __iomem * cpq;
@@ -2539,7 +2539,7 @@ fore200e_initialize(struct fore200e* fore200e)
 }
 
 
-static void __init
+static void __devinit
 fore200e_monitor_putc(struct fore200e* fore200e, char c)
 {
     struct cp_monitor __iomem * monitor = fore200e->cp_monitor;
@@ -2551,7 +2551,7 @@ fore200e_monitor_putc(struct fore200e* fore200e, char c)
 }
 
 
-static int __init
+static int __devinit
 fore200e_monitor_getc(struct fore200e* fore200e)
 {
     struct cp_monitor __iomem * monitor = fore200e->cp_monitor;
@@ -2576,7 +2576,7 @@ fore200e_monitor_getc(struct fore200e* fore200e)
 }
 
 
-static void __init
+static void __devinit
 fore200e_monitor_puts(struct fore200e* fore200e, char* str)
 {
     while (*str) {
@@ -2591,7 +2591,7 @@ fore200e_monitor_puts(struct fore200e* fore200e, char* str)
 }
 
 
-static int __init
+static int __devinit
 fore200e_start_fw(struct fore200e* fore200e)
 {
     int               ok;
@@ -2622,7 +2622,7 @@ fore200e_start_fw(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_load_fw(struct fore200e* fore200e)
 {
     u32* fw_data = (u32*) fore200e->bus->fw_data;
@@ -2648,7 +2648,7 @@ fore200e_load_fw(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_register(struct fore200e* fore200e)
 {
     struct atm_dev* atm_dev;
@@ -2675,7 +2675,7 @@ fore200e_register(struct fore200e* fore200e)
 }
 
 
-static int __init
+static int __devinit
 fore200e_init(struct fore200e* fore200e)
 {
     if (fore200e_register(fore200e) < 0)
@@ -2721,7 +2721,7 @@ fore200e_init(struct fore200e* fore200e)
 	return -EBUSY;
 
     fore200e_supply(fore200e);
-    
+
     /* all done, board initialization is now complete */
     fore200e->state = FORE200E_STATE_COMPLETE;
     return 0;

drivers/block/DAC960.c

@@ -41,6 +41,7 @@
 #include <linux/timer.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/random.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include "DAC960.h"
@@ -3463,7 +3464,7 @@ static inline boolean DAC960_ProcessCompletedRequest(DAC960_Command_T *Command,
 		Command->SegmentCount, Command->DmaDirection);
 
 	 if (!end_that_request_first(Request, UpToDate, Command->BlockCount)) {
-
+		add_disk_randomness(Request->rq_disk);
  	 	end_that_request_last(Request, UpToDate);
 
 		if (Command->Completion) {

drivers/char/hw_random.c

@@ -131,7 +131,9 @@ enum {
 	rng_hw_none,
 	rng_hw_intel,
 	rng_hw_amd,
+#ifdef __i386__
 	rng_hw_via,
+#endif
 	rng_hw_geode,
 };
 

drivers/char/mmtimer.c

@@ -675,7 +675,7 @@ static int __init mmtimer_init(void)
 	cnodeid_t node, maxn = -1;
 
 	if (!ia64_platform_is("sn2"))
-		return -1;
+		return 0;
 
 	/*
 	 * Sanity check the cycles/sec variable

drivers/char/pcmcia/cm4000_cs.c

@@ -13,11 +13,12 @@
   *
   * (C) 2000,2001,2002,2003,2004 Omnikey AG
   *
-  * (C) 2005 Harald Welte <laforge@gnumonks.org>
+  * (C) 2005-2006 Harald Welte <laforge@gnumonks.org>
   * 	- Adhere to Kernel CodingStyle
   * 	- Port to 2.6.13 "new" style PCMCIA
   * 	- Check for copy_{from,to}_user return values
   * 	- Use nonseekable_open()
+  * 	- add class interface for udev device creation
   *
   * All rights reserved. Licensed under dual BSD/GPL license.
   */
@@ -56,7 +57,7 @@ module_param(pc_debug, int, 0600);
 #else
 #define DEBUGP(n, rdr, x, args...)
 #endif
-static char *version = "cm4000_cs.c v2.4.0gm5 - All bugs added by Harald Welte";
+static char *version = "cm4000_cs.c v2.4.0gm6 - All bugs added by Harald Welte";
 
 #define	T_1SEC		(HZ)
 #define	T_10MSEC	msecs_to_jiffies(10)
@@ -156,6 +157,7 @@ struct cm4000_dev {
 		/*queue*/ 4*sizeof(wait_queue_head_t))
 
 static dev_link_t *dev_table[CM4000_MAX_DEV];
+static struct class *cmm_class;
 
 /* This table doesn't use spaces after the comma between fields and thus
  * violates CodingStyle.  However, I don't really think wrapping it around will
@@ -1937,6 +1939,9 @@ static int cm4000_attach(struct pcmcia_device *p_dev)
 	link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
 	cm4000_config(link, i);
 
+	class_device_create(cmm_class, NULL, MKDEV(major, i), NULL,
+			    "cmm%d", i);
+
 	return 0;
 }
 
@@ -1962,6 +1967,8 @@ static void cm4000_detach(struct pcmcia_device *p_dev)
 	dev_table[devno] = NULL;
  	kfree(dev);
 
+	class_device_destroy(cmm_class, MKDEV(major, devno));
+
 	return;
 }
 
@@ -1995,8 +2002,18 @@ static struct pcmcia_driver cm4000_driver = {
 
 static int __init cmm_init(void)
 {
+	int rc;
+
 	printk(KERN_INFO "%s\n", version);
-	pcmcia_register_driver(&cm4000_driver);
+
+	cmm_class = class_create(THIS_MODULE, "cardman_4000");
+	if (!cmm_class)
+		return -1;
+
+	rc = pcmcia_register_driver(&cm4000_driver);
+	if (rc < 0)
+		return rc;
+
 	major = register_chrdev(0, DEVICE_NAME, &cm4000_fops);
 	if (major < 0) {
 		printk(KERN_WARNING MODULE_NAME
@@ -2012,6 +2029,7 @@ static void __exit cmm_exit(void)
 	printk(KERN_INFO MODULE_NAME ": unloading\n");
 	pcmcia_unregister_driver(&cm4000_driver);
 	unregister_chrdev(major, DEVICE_NAME);
+	class_destroy(cmm_class);
 };
 
 module_init(cmm_init);

drivers/char/pcmcia/cm4040_cs.c

@@ -3,12 +3,13 @@
  *
  * (c) 2000-2004 Omnikey AG (http://www.omnikey.com/)
  *
- * (C) 2005 Harald Welte <laforge@gnumonks.org>
+ * (C) 2005-2006 Harald Welte <laforge@gnumonks.org>
  * 	- add support for poll()
  * 	- driver cleanup
  * 	- add waitqueues
  * 	- adhere to linux kernel coding style and policies
  * 	- support 2.6.13 "new style" pcmcia interface
+ * 	- add class interface for udev device creation
  *
  * The device basically is a USB CCID compliant device that has been
  * attached to an I/O-Mapped FIFO.
@@ -53,7 +54,7 @@ module_param(pc_debug, int, 0600);
 #endif
 
 static char *version =
-"OMNIKEY CardMan 4040 v1.1.0gm4 - All bugs added by Harald Welte";
+"OMNIKEY CardMan 4040 v1.1.0gm5 - All bugs added by Harald Welte";
 
 #define	CCID_DRIVER_BULK_DEFAULT_TIMEOUT  	(150*HZ)
 #define	CCID_DRIVER_ASYNC_POWERUP_TIMEOUT 	(35*HZ)
@@ -67,6 +68,7 @@ static char *version =
 static void reader_release(dev_link_t *link);
 
 static int major;
+static struct class *cmx_class;
 
 #define		BS_READABLE	0x01
 #define		BS_WRITABLE	0x02
@@ -696,6 +698,9 @@ static int reader_attach(struct pcmcia_device *p_dev)
 	link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
 	reader_config(link, i);
 
+	class_device_create(cmx_class, NULL, MKDEV(major, i), NULL,
+			    "cmx%d", i);
+
 	return 0;
 }
 
@@ -721,6 +726,8 @@ static void reader_detach(struct pcmcia_device *p_dev)
 	dev_table[devno] = NULL;
 	kfree(dev);
 
+	class_device_destroy(cmx_class, MKDEV(major, devno));
+
 	return;
 }
 
@@ -755,8 +762,17 @@ static struct pcmcia_driver reader_driver = {
 
 static int __init cm4040_init(void)
 {
+	int rc;
+
 	printk(KERN_INFO "%s\n", version);
-	pcmcia_register_driver(&reader_driver);
+	cmx_class = class_create(THIS_MODULE, "cardman_4040");
+	if (!cmx_class)
+		return -1;
+
+	rc = pcmcia_register_driver(&reader_driver);
+	if (rc < 0)
+		return rc;
+
 	major = register_chrdev(0, DEVICE_NAME, &reader_fops);
 	if (major < 0) {
 		printk(KERN_WARNING MODULE_NAME
@@ -771,6 +787,7 @@ static void __exit cm4040_exit(void)
 	printk(KERN_INFO MODULE_NAME ": unloading\n");
 	pcmcia_unregister_driver(&reader_driver);
 	unregister_chrdev(major, DEVICE_NAME);
+	class_destroy(cmx_class);
 }
 
 module_init(cm4040_init);

drivers/char/synclink_gt.c

@@ -306,7 +306,7 @@ struct slgt_info {
 	int tx_active;
 
 	unsigned char signals;    /* serial signal states */
-	unsigned int init_error;  /* initialization error */
+	int init_error;  /* initialization error */
 
 	unsigned char *tx_buf;
 	int tx_count;

drivers/char/tty_io.c

@@ -303,7 +303,7 @@ static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
 			t->commit = 0;
 			t->read = 0;
 			/* DEBUG ONLY */
-			memset(t->data, '*', size);
+/*			memset(t->data, '*', size); */
 /* 			printk("Flip recycle %p\n", t); */
 			return t;
 		}

drivers/ide/legacy/ide-cs.c

@@ -445,6 +445,7 @@ static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
 	PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
 	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
+	PCMCIA_DEVICE_PROD_ID1("TRANSCEND    512M   ", 0xd0909443),
 	PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
 	PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
 	PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),

drivers/ieee1394/video1394.c

@@ -744,7 +744,7 @@ static int __video1394_ioctl(struct file *file,
 			if (i == ISO_CHANNELS) {
 			    PRINT(KERN_ERR, ohci->host->id, 
 				  "No free channel found");
-			    return EAGAIN;
+			    return -EAGAIN;
 			}
 			if (!(ohci->ISO_channel_usage & mask)) {
 			    v.channel = i;

drivers/infiniband/ulp/srp/ib_srp.c

@@ -1155,6 +1155,12 @@ static int srp_send_tsk_mgmt(struct scsi_cmnd *scmnd, u8 func)
 
 	spin_lock_irq(target->scsi_host->host_lock);
 
+	if (target->state == SRP_TARGET_DEAD ||
+	    target->state == SRP_TARGET_REMOVED) {
+		scmnd->result = DID_BAD_TARGET << 16;
+		goto out;
+	}
+
 	if (scmnd->host_scribble == (void *) -1L)
 		goto out;
 

drivers/isdn/hisax/config.c

@@ -1929,6 +1929,8 @@ static struct pci_device_id hisax_pci_tbl[] __initdata = {
 	{PCI_VENDOR_ID_CCD,      PCI_DEVICE_ID_CCD_B00B,         PCI_ANY_ID, PCI_ANY_ID},
 	{PCI_VENDOR_ID_CCD,      PCI_DEVICE_ID_CCD_B00C,         PCI_ANY_ID, PCI_ANY_ID},
 	{PCI_VENDOR_ID_CCD,      PCI_DEVICE_ID_CCD_B100,         PCI_ANY_ID, PCI_ANY_ID},
+	{PCI_VENDOR_ID_CCD,      PCI_DEVICE_ID_CCD_B700,         PCI_ANY_ID, PCI_ANY_ID},
+	{PCI_VENDOR_ID_CCD,      PCI_DEVICE_ID_CCD_B701,         PCI_ANY_ID, PCI_ANY_ID},
 	{PCI_VENDOR_ID_ABOCOM,   PCI_DEVICE_ID_ABOCOM_2BD1,      PCI_ANY_ID, PCI_ANY_ID},
 	{PCI_VENDOR_ID_ASUSTEK,  PCI_DEVICE_ID_ASUSTEK_0675,     PCI_ANY_ID, PCI_ANY_ID},
 	{PCI_VENDOR_ID_BERKOM,   PCI_DEVICE_ID_BERKOM_T_CONCEPT, PCI_ANY_ID, PCI_ANY_ID},

drivers/isdn/hisax/hfc_pci.c

@@ -51,6 +51,8 @@ static const PCI_ENTRY id_list[] =
 	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B00B, "Billion", "B00B"},
 	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B00C, "Billion", "B00C"},
 	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B100, "Seyeon", "B100"},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B700, "Primux II S0", "B700"},
+	{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B701, "Primux II S0 NT", "B701"},
 	{PCI_VENDOR_ID_ABOCOM, PCI_DEVICE_ID_ABOCOM_2BD1, "Abocom/Magitek", "2BD1"},
 	{PCI_VENDOR_ID_ASUSTEK, PCI_DEVICE_ID_ASUSTEK_0675, "Asuscom/Askey", "675"},
 	{PCI_VENDOR_ID_BERKOM, PCI_DEVICE_ID_BERKOM_T_CONCEPT, "German telekom", "T-Concept"},

drivers/isdn/hisax/hfc_usb.c

@@ -1,7 +1,7 @@
 /*
  * hfc_usb.c
  *
- * $Id: hfc_usb.c,v 4.36 2005/04/08 09:55:13 martinb1 Exp $
+ * $Id: hfc_usb.c,v 2.3.2.13 2006/02/17 17:17:22 mbachem Exp $
  *
  * modular HiSax ISDN driver for Colognechip HFC-S USB chip
  *
@@ -45,7 +45,7 @@
 #include "hfc_usb.h"
 
 static const char *hfcusb_revision =
-    "$Revision: 4.36 $ $Date: 2005/04/08 09:55:13 $ ";
+    "$Revision: 2.3.2.13 $ $Date: 2006/02/17 17:17:22 $ ";
 
 /* Hisax debug support
 * use "modprobe debug=x" where x is bitfield of USB_DBG & ISDN_DBG
@@ -219,7 +219,7 @@ symbolic(struct hfcusb_symbolic_list list[], const int num)
 	for (i = 0; list[i].name != NULL; i++)
 		if (list[i].num == num)
 			return (list[i].name);
-	return "<unkown ERROR>";
+	return "<unknown ERROR>";
 }
 
 
@@ -235,9 +235,9 @@ ctrl_start_transfer(hfcusb_data * hfc)
 		hfc->ctrl_urb->transfer_buffer = NULL;
 		hfc->ctrl_urb->transfer_buffer_length = 0;
 		hfc->ctrl_write.wIndex =
-		    hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg;
+		    cpu_to_le16(hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg);
 		hfc->ctrl_write.wValue =
-		    hfc->ctrl_buff[hfc->ctrl_out_idx].reg_val;
+		    cpu_to_le16(hfc->ctrl_buff[hfc->ctrl_out_idx].reg_val);
 
 		usb_submit_urb(hfc->ctrl_urb, GFP_ATOMIC);	/* start transfer */
 	}
@@ -1282,7 +1282,7 @@ usb_init(hfcusb_data * hfc)
 	/* init the background machinery for control requests */
 	hfc->ctrl_read.bRequestType = 0xc0;
 	hfc->ctrl_read.bRequest = 1;
-	hfc->ctrl_read.wLength = 1;
+	hfc->ctrl_read.wLength = cpu_to_le16(1);
 	hfc->ctrl_write.bRequestType = 0x40;
 	hfc->ctrl_write.bRequest = 0;
 	hfc->ctrl_write.wLength = 0;
@@ -1373,9 +1373,8 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 
 	vend_idx = 0xffff;
 	for (i = 0; hfcusb_idtab[i].idVendor; i++) {
-		if (dev->descriptor.idVendor == hfcusb_idtab[i].idVendor
-		    && dev->descriptor.idProduct ==
-		    hfcusb_idtab[i].idProduct) {
+		if ((le16_to_cpu(dev->descriptor.idVendor) == hfcusb_idtab[i].idVendor)
+		    && (le16_to_cpu(dev->descriptor.idProduct) == hfcusb_idtab[i].idProduct)) {
 			vend_idx = i;
 			continue;
 		}
@@ -1516,8 +1515,7 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 							    usb_transfer_mode
 							    = USB_INT;
 							packet_size =
-							    ep->desc.
-							    wMaxPacketSize;
+							    le16_to_cpu(ep->desc.wMaxPacketSize);
 							break;
 						case USB_ENDPOINT_XFER_BULK:
 							if (ep_addr & 0x80)
@@ -1545,8 +1543,7 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 							    usb_transfer_mode
 							    = USB_BULK;
 							packet_size =
-							    ep->desc.
-							    wMaxPacketSize;
+							    le16_to_cpu(ep->desc.wMaxPacketSize);
 							break;
 						case USB_ENDPOINT_XFER_ISOC:
 							if (ep_addr & 0x80)
@@ -1574,8 +1571,7 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 							    usb_transfer_mode
 							    = USB_ISOC;
 							iso_packet_size =
-							    ep->desc.
-							    wMaxPacketSize;
+							    le16_to_cpu(ep->desc.wMaxPacketSize);
 							break;
 						default:
 							context->
@@ -1588,10 +1584,8 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 						    fifonum = cidx;
 						context->fifos[cidx].hfc =
 						    context;
-						context->fifos[cidx].
-						    usb_packet_maxlen =
-						    ep->desc.
-						    wMaxPacketSize;
+						context->fifos[cidx].usb_packet_maxlen =
+						    le16_to_cpu(ep->desc.wMaxPacketSize);
 						context->fifos[cidx].
 						    intervall =
 						    ep->desc.bInterval;

drivers/isdn/i4l/isdn_tty.c

@@ -1682,6 +1682,7 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
 #ifdef ISDN_DEBUG_MODEM_OPEN
 		printk(KERN_DEBUG "isdn_tty_close after info->count != 0\n");
 #endif
+		module_put(info->owner);
 		return;
 	}
 	info->flags |= ISDN_ASYNC_CLOSING;

drivers/macintosh/windfarm_core.c

@@ -35,6 +35,8 @@
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
 
+#include <asm/prom.h>
+
 #include "windfarm.h"
 
 #define VERSION "0.2"
@@ -465,6 +467,11 @@ static int __init windfarm_core_init(void)
 {
 	DBG("wf: core loaded\n");
 
+	/* Don't register on old machines that use therm_pm72 for now */
+	if (machine_is_compatible("PowerMac7,2") ||
+	    machine_is_compatible("PowerMac7,3") ||
+	    machine_is_compatible("RackMac3,1"))
+		return -ENODEV;
 	platform_device_register(&wf_platform_device);
 	return 0;
 }

drivers/macintosh/windfarm_cpufreq_clamp.c

@@ -8,6 +8,8 @@
 #include <linux/wait.h>
 #include <linux/cpufreq.h>
 
+#include <asm/prom.h>
+
 #include "windfarm.h"
 
 #define VERSION "0.3"
@@ -74,6 +76,12 @@ static int __init wf_cpufreq_clamp_init(void)
 {
 	struct wf_control *clamp;
 
+	/* Don't register on old machines that use therm_pm72 for now */
+	if (machine_is_compatible("PowerMac7,2") ||
+	    machine_is_compatible("PowerMac7,3") ||
+	    machine_is_compatible("RackMac3,1"))
+		return -ENODEV;
+
 	clamp = kmalloc(sizeof(struct wf_control), GFP_KERNEL);
 	if (clamp == NULL)
 		return -ENOMEM;

drivers/macintosh/windfarm_lm75_sensor.c

@@ -25,7 +25,7 @@
 
 #include "windfarm.h"
 
-#define VERSION "0.1"
+#define VERSION "0.2"
 
 #undef DEBUG
 
@@ -113,6 +113,7 @@ static struct wf_lm75_sensor *wf_lm75_create(struct i2c_adapter *adapter,
 					     const char *loc)
 {
 	struct wf_lm75_sensor *lm;
+	int rc;
 
 	DBG("wf_lm75: creating  %s device at address 0x%02x\n",
 	    ds1775 ? "ds1775" : "lm75", addr);
@@ -139,9 +140,11 @@ static struct wf_lm75_sensor *wf_lm75_create(struct i2c_adapter *adapter,
 	lm->i2c.driver = &wf_lm75_driver;
 	strncpy(lm->i2c.name, lm->sens.name, I2C_NAME_SIZE-1);
 
-	if (i2c_attach_client(&lm->i2c)) {
-		printk(KERN_ERR "windfarm: failed to attach %s %s to i2c\n",
-		       ds1775 ? "ds1775" : "lm75", lm->i2c.name);
+	rc = i2c_attach_client(&lm->i2c);
+	if (rc) {
+		printk(KERN_ERR "windfarm: failed to attach %s %s to i2c,"
+		       " err %d\n", ds1775 ? "ds1775" : "lm75",
+		       lm->i2c.name, rc);
 		goto fail;
 	}
 
@@ -175,16 +178,22 @@ static int wf_lm75_attach(struct i2c_adapter *adapter)
 	     (dev = of_get_next_child(busnode, dev)) != NULL;) {
 		const char *loc =
 			get_property(dev, "hwsensor-location", NULL);
-		u32 *reg = (u32 *)get_property(dev, "reg", NULL);
-		DBG(" dev: %s... (loc: %p, reg: %p)\n", dev->name, loc, reg);
-		if (loc == NULL || reg == NULL)
+		u8 addr;
+
+		/* We must re-match the adapter in order to properly check
+		 * the channel on multibus setups
+		 */
+		if (!pmac_i2c_match_adapter(dev, adapter))
+			continue;
+		addr = pmac_i2c_get_dev_addr(dev);
+		if (loc == NULL || addr == 0)
 			continue;
 		/* real lm75 */
 		if (device_is_compatible(dev, "lm75"))
-			wf_lm75_create(adapter, *reg, 0, loc);
+			wf_lm75_create(adapter, addr, 0, loc);
 		/* ds1775 (compatible, better resolution */
 		else if (device_is_compatible(dev, "ds1775"))
-			wf_lm75_create(adapter, *reg, 1, loc);
+			wf_lm75_create(adapter, addr, 1, loc);
 	}
 	return 0;
 }
@@ -206,6 +215,11 @@ static int wf_lm75_detach(struct i2c_client *client)
 
 static int __init wf_lm75_sensor_init(void)
 {
+	/* Don't register on old machines that use therm_pm72 for now */
+	if (machine_is_compatible("PowerMac7,2") ||
+	    machine_is_compatible("PowerMac7,3") ||
+	    machine_is_compatible("RackMac3,1"))
+		return -ENODEV;
 	return i2c_add_driver(&wf_lm75_driver);
 }
 

drivers/macintosh/windfarm_max6690_sensor.c

@@ -17,7 +17,7 @@
 
 #include "windfarm.h"
 
-#define VERSION "0.1"
+#define VERSION "0.2"
 
 /* This currently only exports the external temperature sensor,
    since that's all the control loops need. */
@@ -81,7 +81,7 @@ static struct wf_sensor_ops wf_max6690_ops = {
 static void wf_max6690_create(struct i2c_adapter *adapter, u8 addr)
 {
 	struct wf_6690_sensor *max;
-	char *name = "u4-temp";
+	char *name = "backside-temp";
 
 	max = kzalloc(sizeof(struct wf_6690_sensor), GFP_KERNEL);
 	if (max == NULL) {
@@ -118,7 +118,6 @@ static int wf_max6690_attach(struct i2c_adapter *adapter)
 	struct device_node *busnode, *dev = NULL;
 	struct pmac_i2c_bus *bus;
 	const char *loc;
-	u32 *reg;
 
 	bus = pmac_i2c_adapter_to_bus(adapter);
 	if (bus == NULL)
@@ -126,16 +125,23 @@ static int wf_max6690_attach(struct i2c_adapter *adapter)
 	busnode = pmac_i2c_get_bus_node(bus);
 
 	while ((dev = of_get_next_child(busnode, dev)) != NULL) {
+		u8 addr;
+
+		/* We must re-match the adapter in order to properly check
+		 * the channel on multibus setups
+		 */
+		if (!pmac_i2c_match_adapter(dev, adapter))
+			continue;
 		if (!device_is_compatible(dev, "max6690"))
 			continue;
+		addr = pmac_i2c_get_dev_addr(dev);
 		loc = get_property(dev, "hwsensor-location", NULL);
-		reg = (u32 *) get_property(dev, "reg", NULL);
-		if (!loc || !reg)
+		if (loc == NULL || addr == 0)
 			continue;
-		printk("found max6690, loc=%s reg=%x\n", loc, *reg);
+		printk("found max6690, loc=%s addr=0x%02x\n", loc, addr);
 		if (strcmp(loc, "BACKSIDE"))
 			continue;
-		wf_max6690_create(adapter, *reg);
+		wf_max6690_create(adapter, addr);
 	}
 
 	return 0;
@@ -153,6 +159,11 @@ static int wf_max6690_detach(struct i2c_client *client)
 
 static int __init wf_max6690_sensor_init(void)
 {
+	/* Don't register on old machines that use therm_pm72 for now */
+	if (machine_is_compatible("PowerMac7,2") ||
+	    machine_is_compatible("PowerMac7,3") ||
+	    machine_is_compatible("RackMac3,1"))
+		return -ENODEV;
 	return i2c_add_driver(&wf_max6690_driver);
 }
 

drivers/macintosh/windfarm_pid.c

@@ -143,3 +143,7 @@ s32 wf_cpu_pid_run(struct wf_cpu_pid_state *st, s32 new_power, s32 new_temp)
 	return st->target;
 }
 EXPORT_SYMBOL_GPL(wf_cpu_pid_run);
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("PID algorithm for PowerMacs thermal control");
+MODULE_LICENSE("GPL");

drivers/macintosh/windfarm_pm112.c

@@ -358,6 +358,7 @@ static void backside_fan_tick(void)
 		return;
 	if (!backside_tick) {
 		/* first time; initialize things */
+		printk(KERN_INFO "windfarm: Backside control loop started.\n");
 		backside_param.min = backside_fan->ops->get_min(backside_fan);
 		backside_param.max = backside_fan->ops->get_max(backside_fan);
 		wf_pid_init(&backside_pid, &backside_param);
@@ -407,6 +408,7 @@ static void drive_bay_fan_tick(void)
 		return;
 	if (!drive_bay_tick) {
 		/* first time; initialize things */
+		printk(KERN_INFO "windfarm: Drive bay control loop started.\n");
 		drive_bay_prm.min = drive_bay_fan->ops->get_min(drive_bay_fan);
 		drive_bay_prm.max = drive_bay_fan->ops->get_max(drive_bay_fan);
 		wf_pid_init(&drive_bay_pid, &drive_bay_prm);
@@ -458,6 +460,7 @@ static void slots_fan_tick(void)
 		return;
 	if (!slots_started) {
 		/* first time; initialize things */
+		printk(KERN_INFO "windfarm: Slots control loop started.\n");
 		wf_pid_init(&slots_pid, &slots_param);
 		slots_started = 1;
 	}
@@ -504,6 +507,7 @@ static void pm112_tick(void)
 
 	if (!started) {
 		started = 1;
+		printk(KERN_INFO "windfarm: CPUs control loops started.\n");
 		for (i = 0; i < nr_cores; ++i) {
 			if (create_cpu_loop(i) < 0) {
 				failure_state = FAILURE_PERM;
@@ -594,8 +598,6 @@ static void pm112_new_sensor(struct wf_sensor *sr)
 {
 	unsigned int i;
 
-	if (have_all_sensors)
-		return;
 	if (!strncmp(sr->name, "cpu-temp-", 9)) {
 		i = sr->name[9] - '0';
 		if (sr->name[10] == 0 && i < NR_CORES &&
@@ -613,7 +615,7 @@ static void pm112_new_sensor(struct wf_sensor *sr)
 	} else if (!strcmp(sr->name, "slots-power")) {
 		if (slots_power == NULL && wf_get_sensor(sr) == 0)
 			slots_power = sr;
-	} else if (!strcmp(sr->name, "u4-temp")) {
+	} else if (!strcmp(sr->name, "backside-temp")) {
 		if (u4_temp == NULL && wf_get_sensor(sr) == 0)
 			u4_temp = sr;
 	} else

drivers/media/dvb/b2c2/flexcop-fe-tuner.c

@@ -526,7 +526,7 @@ int flexcop_frontend_init(struct flexcop_device *fc)
 		info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address);
 	} else
 	/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
-	if ((fc->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
+	if ((fc->fe = vp310_mt312_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
 		ops = fc->fe->ops;
 
 		ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;

drivers/media/dvb/bt8xx/bt878.c

@@ -382,7 +382,7 @@ bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *
 EXPORT_SYMBOL(bt878_device_control);
 
 
-struct cards card_list[] __devinitdata = {
+static struct cards card_list[] __devinitdata = {
 
 	{ 0x01010071, BTTV_BOARD_NEBULA_DIGITV,			"Nebula Electronics DigiTV" },
 	{ 0x07611461, BTTV_BOARD_AVDVBT_761,			"AverMedia AverTV DVB-T 761" },