Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (214 commits)
  omap2: Initialize Menelaus and MMC for N8X0
  AM3517 EVM: correct typo - tca6416 mispelt as tca6516
  AM3517 EVM: Enable I2C support
  AM35x: Enable OMAP_MUX in defconfig
  AM35x: Add missing GPIO mux config for EHCI port
  Zoom3: Defconfig update
  omap: i2c: Fix muxing for command line enabled bus
  OMAP4: clock: Remove clock hacks from timer-gp.c
  OMAP4: clock: Add dummy clock nodes for interface clocks
  OMAP4: clock: Rename leaf clock nodes to end with a _ick or _fck
  OMAP2+ clock: revise omap2_clk_{disable,enable}()
  OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code
  OMAP clockdomain: if no autodeps exist, don't try to add or remove them
  OMAP hwmod: add hwmod class support
  OMAP hwmod: convert header files with static allocations into C files
  OMAP hwmod: convert hwmod to use hardware clock names rather than clkdev dev+con
  OMAP clock: add omap_clk_get_by_name() for use by OMAP hwmod core code
  OMAP3: clock: add capability to change rate of dpll4_m5_ck_3630
  OMAP4 clock: drop the ALWAYS_ENABLED clock flag
  OMAP clock: drop RATE_FIXED clock flag
  ...

arch/arm/configs/am3517_evm_defconfig

@@ -201,7 +201,7 @@ CONFIG_ARCH_OMAP3=y
 # CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
 # CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MUX=y
 # CONFIG_OMAP_MCBSP is not set
 # CONFIG_OMAP_MBOX_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
@@ -590,7 +590,46 @@ CONFIG_HW_RANDOM=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #

arch/arm/configs/devkit8000_defconfig

@@ -0,0 +1,1889 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc6
+# Thu Feb  4 15:42:56 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+# CONFIG_RD_LZO is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2PLUS=y
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+CONFIG_MACH_DEVKIT8000=y
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS2,115200n8 root=/dev/nfs nfsroot=192.168.1.1:home/nfsroot/current,home/nfsroot/current ip=dhcp rw noinitrd root  delay=3"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+CONFIG_IRDA=y
+
+#
+# IrDA protocols
+#
+# CONFIG_IRLAN is not set
+# CONFIG_IRCOMM is not set
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_MCS_FIR is not set
+CONFIG_BT=y
+# CONFIG_BT_L2CAP is not set
+# CONFIG_BT_SCO is not set
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=40960
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_KEYBOARD_MATRIX=y
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=y
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_POWER=y
+CONFIG_TWL4030_CODEC=y
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_BOTH_ENDIAN=y
+# CONFIG_FB_BIG_ENDIAN is not set
+# CONFIG_FB_LITTLE_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_FB_OMAP_BOOTLOADER_INIT=y
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=0
+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
+# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+# CONFIG_OMAP2_DSS_SDI is not set
+# CONFIG_OMAP2_DSS_DSI is not set
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_FB_OMAP2=y
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=3
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC=y
+# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
+CONFIG_PANEL_INNOLUX_AT070TN83=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TWL4030=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
+CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_AUDIO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_ETH_EEM=y
+CONFIG_USB_GADGETFS=m
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_G_PRINTER=m
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=m
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_REGULATOR is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

arch/arm/configs/igep0020_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Fri Nov 13 12:01:17 2009
+# Linux kernel version: 2.6.33-rc3
+# Thu Jan  7 16:14:55 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -46,6 +46,7 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -126,14 +127,41 @@ CONFIG_LBDAF=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -162,6 +190,7 @@ CONFIG_MMU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
 # CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
@@ -184,6 +213,7 @@ CONFIG_MMU=y
 # CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
 # CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
 
 #
 # TI OMAP Implementations
@@ -197,12 +227,8 @@ CONFIG_ARCH_OMAP3=y
 #
 # OMAP Feature Selections
 #
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_MUX is not set
 CONFIG_OMAP_MCBSP=y
 # CONFIG_OMAP_MBOX_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
@@ -217,6 +243,7 @@ CONFIG_OMAP_LL_DEBUG_UART3=y
 CONFIG_OMAP_PM_NOOP=y
 CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CBB=y
 
 #
 # OMAP Board Type
@@ -227,13 +254,16 @@ CONFIG_ARCH_OMAP3430=y
 # CONFIG_MACH_OMAP3EVM is not set
 # CONFIG_MACH_OMAP3517EVM is not set
 # CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
 # CONFIG_MACH_OMAP_3430SDP is not set
 # CONFIG_MACH_NOKIA_RX51 is not set
 # CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_CM_T35 is not set
 # CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_MACH_CM_T35 is not set
 CONFIG_MACH_IGEP0020=y
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
 
 #
 # Processor Type
@@ -305,8 +335,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 # CONFIG_LEDS is not set
@@ -440,35 +468,35 @@ CONFIG_BT_HIDP=m
 #
 # Bluetooth device drivers
 #
-CONFIG_BT_HCIBTUSB=m
+# CONFIG_BT_HCIBTUSB is not set
 # CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
 CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
 CONFIG_BT_HCIVHCI=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
-CONFIG_CFG80211=m
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_CFG80211=y
 # CONFIG_NL80211_TESTMODE is not set
 # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
 # CONFIG_CFG80211_REG_DEBUG is not set
 CONFIG_CFG80211_DEFAULT_PS=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=1
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
+CONFIG_CFG80211_WEXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
+CONFIG_LIB80211=y
 # CONFIG_LIB80211_DEBUG is not set
-CONFIG_MAC80211=m
+CONFIG_MAC80211=y
 # CONFIG_MAC80211_RC_PID is not set
 CONFIG_MAC80211_RC_MINSTREL=y
 # CONFIG_MAC80211_RC_DEFAULT_PID is not set
@@ -500,12 +528,95 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
@@ -516,7 +627,6 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_EEPROM_93CX6=m
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -613,56 +723,26 @@ CONFIG_SMSC911X=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
 # CONFIG_LIBERTAS_THINFIRM is not set
-CONFIG_AT76C50X_USB=m
-CONFIG_USB_ZD1201=m
-CONFIG_USB_NET_RNDIS_WLAN=m
-CONFIG_RTL8187=m
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
 # CONFIG_MAC80211_HWSIM is not set
-CONFIG_P54_COMMON=m
-CONFIG_P54_USB=m
-CONFIG_P54_SPI=m
-CONFIG_ATH_COMMON=m
-CONFIG_AR9170_USB=m
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_B43=m
-# CONFIG_B43_SDIO is not set
-# CONFIG_B43_PHY_LP is not set
-CONFIG_B43_HWRNG=y
-# CONFIG_B43_DEBUG is not set
-CONFIG_B43LEGACY=m
-CONFIG_B43LEGACY_HWRNG=y
-# CONFIG_B43LEGACY_DEBUG is not set
-CONFIG_B43LEGACY_DMA=y
-CONFIG_B43LEGACY_PIO=y
-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
-# CONFIG_B43LEGACY_DMA_MODE is not set
-# CONFIG_B43LEGACY_PIO_MODE is not set
-CONFIG_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG is not set
-CONFIG_RT2X00=m
-CONFIG_RT2500USB=m
-CONFIG_RT73USB=m
-CONFIG_RT2800USB=m
-CONFIG_RT2X00_LIB_USB=m
-CONFIG_RT2X00_LIB=m
-CONFIG_RT2X00_LIB_HT=y
-CONFIG_RT2X00_LIB_FIRMWARE=y
-CONFIG_RT2X00_LIB_CRYPTO=y
-# CONFIG_RT2X00_DEBUG is not set
-CONFIG_WL12XX=m
-# CONFIG_WL1251 is not set
-# CONFIG_WL1271 is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
 # CONFIG_IWM is not set
+CONFIG_LIBERTAS=y
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_ZD1211RW is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -672,29 +752,10 @@ CONFIG_WL12XX=m
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-CONFIG_USB_NET_CDC_EEM=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_SMSC95XX=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-# CONFIG_USB_ALI_M5632 is not set
-# CONFIG_USB_AN2720 is not set
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -710,6 +771,7 @@ CONFIG_USB_NET_ZAURUS=m
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -809,7 +871,6 @@ CONFIG_I2C_OMAP=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -825,6 +886,8 @@ CONFIG_SPI_MASTER=y
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -892,7 +955,7 @@ CONFIG_SSB_SDIOHOST_POSSIBLE=y
 #
 # Multifunction device drivers
 #
-# CONFIG_MFD_CORE is not set
+CONFIG_MFD_CORE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
@@ -900,11 +963,13 @@ CONFIG_SSB_SDIOHOST_POSSIBLE=y
 # CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
 # CONFIG_TWL4030_POWER is not set
+CONFIG_TWL4030_CODEC=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
@@ -912,6 +977,8 @@ CONFIG_TWL4030_CORE=y
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
@@ -919,6 +986,7 @@ CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_TWL4030=y
 # CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_REGULATOR_TPS65023 is not set
@@ -930,65 +998,129 @@ CONFIG_REGULATOR_TWL4030=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=14
+# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
+# CONFIG_OMAP2_DSS_RFBI is not set
+# CONFIG_OMAP2_DSS_VENC is not set
+# CONFIG_OMAP2_DSS_SDI is not set
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_OMAP2_DSS_USE_DSI_PLL=y
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_FB_OMAP2=y
+# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=3
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC=y
+# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
+# CONFIG_PANEL_TAAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_ZEROPLUS is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_IGEP0020=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TWL4030=y
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_HID=m
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
@@ -997,12 +1129,12 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 # Miscellaneous USB options
 #
 # CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=m
+# CONFIG_USB_MON is not set
 # CONFIG_USB_WUSB is not set
 # CONFIG_USB_WUSB_CBAF is not set
 
@@ -1010,29 +1142,21 @@ CONFIG_USB_MON=m
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1049,19 +1173,7 @@ CONFIG_USB_INVENTRA_DMA=y
 #
 # also be needed; see USB_STORAGE Help for more info
 #
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1099,41 +1211,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DEBUG=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_GADGET is not set
 
 #
 # OTG and related infrastructure
@@ -1141,10 +1219,11 @@ CONFIG_USB_ZERO=m
 CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_ISP1301_OMAP is not set
-CONFIG_TWL4030_USB=y
+# CONFIG_USB_ULPI is not set
+# CONFIG_TWL4030_USB is not set
 # CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_DEBUG=y
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
@@ -1158,7 +1237,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 #
 # MMC/SD/SDIO Host Controller Drivers
 #
-# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_SDHCI_PLTFM is not set
 # CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
 # CONFIG_MMC_AT91 is not set
@@ -1178,6 +1258,11 @@ CONFIG_RTC_LIB=y
 #
 # CONFIG_STAGING is not set
 
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
 #
 # File systems
 #
@@ -1253,6 +1338,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1401,6 +1487,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
@@ -1425,7 +1512,9 @@ CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
 # CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
 
 #
 # Security options
@@ -1433,7 +1522,11 @@ CONFIG_DEBUG_LL=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #

arch/arm/configs/omap3_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc8
-# Tue Dec  1 14:04:02 2009
+# Linux kernel version: 2.6.33-rc5
+# Tue Jan 26 11:05:31 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -20,6 +20,8 @@ CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_ARMV6=y
+CONFIG_OPROFILE_ARM11_CORE=y
 CONFIG_OPROFILE_ARMV7=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -33,6 +35,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -48,6 +56,7 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -69,6 +78,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -133,14 +143,41 @@ CONFIG_LBDAF=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 CONFIG_FREEZER=y
 
 #
@@ -169,6 +206,7 @@ CONFIG_MMU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
 # CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
@@ -191,21 +229,23 @@ CONFIG_MMU=y
 # CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
 # CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
 
 #
 # TI OMAP Implementations
 #
 CONFIG_ARCH_OMAP_OTG=y
 # CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_ARCH_OMAP2=y
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
+CONFIG_ARCH_OMAP4=y
 
 #
 # OMAP Feature Selections
 #
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_DEBUG_DEVICES=y
+CONFIG_OMAP_DEBUG_LEDS=y
 CONFIG_OMAP_RESET_CLOCKS=y
 CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
@@ -216,43 +256,66 @@ CONFIG_OMAP_MCBSP=y
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_LL_DEBUG_NONE=y
 # CONFIG_OMAP_PM_NONE is not set
 CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
+CONFIG_MACH_OMAP_GENERIC=y
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP2420=y
+# CONFIG_ARCH_OMAP2430 is not set
 CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CBB=y
+CONFIG_OMAP_PACKAGE_CUS=y
+CONFIG_OMAP_PACKAGE_CBP=y
 
 #
 # OMAP Board Type
 #
+CONFIG_MACH_OMAP2_TUSB6010=y
+CONFIG_MACH_OMAP_H4=y
+CONFIG_MACH_OMAP_APOLLON=y
+# CONFIG_MACH_OMAP_2430SDP is not set
 CONFIG_MACH_OMAP3_BEAGLE=y
 CONFIG_MACH_OMAP_LDP=y
 CONFIG_MACH_OVERO=y
 CONFIG_MACH_OMAP3EVM=y
 CONFIG_MACH_OMAP3517EVM=y
 CONFIG_MACH_OMAP3_PANDORA=y
+CONFIG_MACH_OMAP3_TOUCHBOOK=y
 CONFIG_MACH_OMAP_3430SDP=y
+CONFIG_MACH_NOKIA_N800=y
+CONFIG_MACH_NOKIA_N810=y
+CONFIG_MACH_NOKIA_N810_WIMAX=y
+CONFIG_MACH_NOKIA_N8X0=y
 CONFIG_MACH_NOKIA_RX51=y
 CONFIG_MACH_OMAP_ZOOM2=y
 CONFIG_MACH_OMAP_ZOOM3=y
 CONFIG_MACH_CM_T35=y
 CONFIG_MACH_IGEP0020=y
 CONFIG_MACH_OMAP_3630SDP=y
+CONFIG_MACH_OMAP_4430SDP=y
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
 
 #
 # Processor Type
 #
-CONFIG_CPU_32v6K=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
 CONFIG_CPU_V7=y
+CONFIG_CPU_32v6=y
 CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV6=y
 CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V6=y
 CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V6=y
 CONFIG_CPU_CACHE_V7=y
 CONFIG_CPU_CACHE_VIPT=y
 CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
 CONFIG_CPU_TLB_V7=y
 CONFIG_CPU_HAS_ASID=y
 CONFIG_CPU_CP15=y
@@ -268,9 +331,11 @@ CONFIG_ARM_THUMBEE=y
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_HAS_TLS_REG=y
 CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_411920 is not set
 # CONFIG_ARM_ERRATA_430973 is not set
 # CONFIG_ARM_ERRATA_458693 is not set
 # CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_GIC=y
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -287,6 +352,7 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_SMP is not set
 CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
@@ -298,6 +364,7 @@ CONFIG_HZ=128
 # CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -308,12 +375,10 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
@@ -509,15 +574,18 @@ CONFIG_BT_HCIBPA10X=y
 # CONFIG_BT_MRVL is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
 CONFIG_CFG80211=y
 # CONFIG_NL80211_TESTMODE is not set
 # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
 # CONFIG_CFG80211_REG_DEBUG is not set
 CONFIG_CFG80211_DEFAULT_PS=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=1
 # CONFIG_CFG80211_DEBUGFS is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
+CONFIG_CFG80211_WEXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=y
 # CONFIG_LIB80211_DEBUG is not set
@@ -671,6 +739,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
@@ -681,9 +750,12 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -694,6 +766,7 @@ CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
 # CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -792,28 +865,26 @@ CONFIG_SMSC911X=y
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=y
-CONFIG_LIBERTAS_USB=y
-CONFIG_LIBERTAS_SDIO=y
-# CONFIG_LIBERTAS_SPI is not set
-CONFIG_LIBERTAS_DEBUG=y
 # CONFIG_LIBERTAS_THINFIRM is not set
 # CONFIG_AT76C50X_USB is not set
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_NET_RNDIS_WLAN is not set
 # CONFIG_RTL8187 is not set
 # CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
 # CONFIG_ATH_COMMON is not set
-# CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IWM is not set
+CONFIG_LIBERTAS=y
+CONFIG_LIBERTAS_USB=y
+CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_SPI is not set
+CONFIG_LIBERTAS_DEBUG=y
+# CONFIG_P54_COMMON is not set
 # CONFIG_RT2X00 is not set
 # CONFIG_WL12XX is not set
-# CONFIG_IWM is not set
+# CONFIG_ZD1211RW is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -861,6 +932,7 @@ CONFIG_USB_NET_ZAURUS=y
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -889,6 +961,7 @@ CONFIG_KEYBOARD_GPIO=y
 # CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_OMAP is not set
 CONFIG_KEYBOARD_TWL4030=y
 # CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
@@ -914,6 +987,7 @@ CONFIG_TOUCHSCREEN_ADS7846=y
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 # CONFIG_TOUCHSCREEN_AD7879_SPI is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
 # CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
@@ -948,6 +1022,7 @@ CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -986,6 +1061,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_HW_RANDOM_OMAP=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
@@ -1024,7 +1100,6 @@ CONFIG_I2C_OMAP=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1040,6 +1115,8 @@ CONFIG_SPI_MASTER=y
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -1067,6 +1144,7 @@ CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -1141,6 +1219,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -1166,6 +1245,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1179,6 +1259,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
@@ -1204,20 +1285,22 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
-# CONFIG_MFD_CORE is not set
+CONFIG_MFD_CORE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TPS65010 is not set
+# CONFIG_MENELAUS is not set
 CONFIG_TWL4030_CORE=y
 # CONFIG_TWL4030_POWER is not set
-# CONFIG_TWL4030_CODEC is not set
+CONFIG_TWL4030_CODEC=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
@@ -1225,6 +1308,8 @@ CONFIG_TWL4030_CORE=y
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -1232,6 +1317,7 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
 # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_TWL4030=y
 # CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_REGULATOR_TPS65023 is not set
@@ -1267,6 +1353,7 @@ CONFIG_FB_TILEBLITTING=y
 #
 # CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
@@ -1281,6 +1368,7 @@ CONFIG_FB_OMAP_079M3R=y
 # CONFIG_FB_OMAP_LCD_MIPID is not set
 # CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
 CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_OMAP2_DSS is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 # CONFIG_LCD_LMS283GF05 is not set
@@ -1364,12 +1452,15 @@ CONFIG_SND_USB_AUDIO=y
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
 CONFIG_SND_OMAP_SOC_MCBSP=y
+# CONFIG_SND_OMAP_SOC_N810 is not set
 # CONFIG_SND_OMAP_SOC_OVERO is not set
 # CONFIG_SND_OMAP_SOC_OMAP3EVM is not set
+# CONFIG_SND_OMAP_SOC_AM3517EVM is not set
 # CONFIG_SND_OMAP_SOC_SDP3430 is not set
 CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
 # CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE is not set
 # CONFIG_SND_OMAP_SOC_ZOOM2 is not set
+# CONFIG_SND_OMAP_SOC_IGEP0020 is not set
 CONFIG_SND_SOC_I2C_AND_SPI=y
 # CONFIG_SND_SOC_ALL_CODECS is not set
 CONFIG_SND_SOC_TWL4030=y
@@ -1418,7 +1509,7 @@ CONFIG_USB_HID=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
@@ -1441,6 +1532,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
@@ -1556,16 +1648,18 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
-CONFIG_USB_ZERO=y
+CONFIG_USB_ZERO=m
 # CONFIG_USB_ZERO_HNPTEST is not set
 # CONFIG_USB_AUDIO is not set
 # CONFIG_USB_ETH is not set
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
 
 #
 # OTG and related infrastructure
@@ -1573,6 +1667,7 @@ CONFIG_USB_ZERO=y
 CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
 CONFIG_TWL4030_USB=y
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_MMC=y
@@ -1609,7 +1704,9 @@ CONFIG_LEDS_GPIO_PLATFORM=y
 # CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_REGULATOR is not set
 # CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
 
 #
 # LED Triggers
@@ -1653,6 +1750,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 CONFIG_RTC_DRV_TWL4030=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
@@ -1683,7 +1781,9 @@ CONFIG_RTC_DRV_TWL4030=y
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1951,6 +2051,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
@@ -1983,7 +2084,9 @@ CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
 # CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
 
 #
 # Security options
@@ -1993,9 +2096,12 @@ CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
 # CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
 # CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #

arch/arm/configs/omap3_evm_defconfig

@@ -187,6 +187,8 @@ CONFIG_ARCH_OMAP3=y
 #
 # OMAP Feature Selections
 #
+CONFIG_OMAP_SMARTREFLEX=y
+# CONFIG_OMAP_SMARTREFLEX_TESTING is not set
 # CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
 # CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
@@ -333,7 +335,7 @@ CONFIG_BINFMT_MISC=y
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
+CONFIG_PM_DEBUG=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
@@ -1339,7 +1341,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set

arch/arm/configs/omap_4430sdp_defconfig

@@ -199,7 +199,7 @@ CONFIG_ARCH_OMAP4=y
 #
 # CONFIG_OMAP_RESET_CLOCKS is not set
 # CONFIG_OMAP_MUX is not set
-# CONFIG_OMAP_MCBSP is not set
+CONFIG_OMAP_MCBSP=y
 # CONFIG_OMAP_MBOX_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
@@ -307,7 +307,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x81600000,20M ramdisk_size=20480"
+CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS2,115200n8 initrd=0x81600000,20M ramdisk_size=20480"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
@@ -491,7 +491,8 @@ CONFIG_GPIOLIB=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
+CONFIG_WATCHDOG=y
+CONFIG_OMAP_WATCHDOG=y
 CONFIG_SSB_POSSIBLE=y
 
 #

arch/arm/configs/omap_zoom3_defconfig

@@ -1136,7 +1136,7 @@ CONFIG_TWL4030_USB=y
 # CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
+CONFIG_MMC_UNSAFE_RESUME=y
 
 #
 # MMC/SD/SDIO Card Drivers
@@ -1186,7 +1186,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_TWL4030 is not set
+CONFIG_RTC_DRV_TWL4030=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1416,7 +1416,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set

arch/arm/configs/rx51_defconfig

@@ -1354,7 +1354,7 @@ CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
+CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
@@ -1362,7 +1362,7 @@ CONFIG_MMC=y
 # MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
 # CONFIG_SDIO_UART is not set
 # CONFIG_MMC_TEST is not set
 

arch/arm/mach-omap1/Makefile

@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := io.o id.o sram.o irq.o mux.o serial.o devices.o
+obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o
 obj-y += clock.o clock_data.o opp_data.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o

arch/arm/mach-omap1/board-fsample.c

@@ -18,18 +18,19 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <plat/tc.h>
 #include <mach/gpio.h>
 #include <plat/mux.h>
+#include <plat/flash.h>
 #include <plat/fpga.h>
 #include <plat/keypad.h>
 #include <plat/common.h>
@@ -150,9 +151,9 @@ static struct mtd_partition nor_partitions[] = {
 	},
 };
 
-static struct flash_platform_data nor_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data nor_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= nor_partitions,
 	.nr_parts	= ARRAY_SIZE(nor_partitions),
 };
@@ -164,7 +165,7 @@ static struct resource nor_resource = {
 };
 
 static struct platform_device nor_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &nor_data,

arch/arm/mach-omap1/board-h2.c

@@ -26,6 +26,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/i2c/tps65010.h>
 #include <linux/smc91x.h>
@@ -35,7 +36,6 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <plat/mux.h>
@@ -45,6 +45,7 @@
 #include <plat/usb.h>
 #include <plat/keypad.h>
 #include <plat/common.h>
+#include <plat/flash.h>
 
 #include "board-h2.h"
 
@@ -121,9 +122,9 @@ static struct mtd_partition h2_nor_partitions[] = {
 	}
 };
 
-static struct flash_platform_data h2_nor_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data h2_nor_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= h2_nor_partitions,
 	.nr_parts	= ARRAY_SIZE(h2_nor_partitions),
 };
@@ -134,7 +135,7 @@ static struct resource h2_nor_resource = {
 };
 
 static struct platform_device h2_nor_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &h2_nor_data,

arch/arm/mach-omap1/board-h3.c

@@ -25,6 +25,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c/tps65010.h>
@@ -37,7 +38,6 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <mach/irqs.h>
@@ -47,6 +47,7 @@
 #include <plat/keypad.h>
 #include <plat/dma.h>
 #include <plat/common.h>
+#include <plat/flash.h>
 
 #include "board-h3.h"
 
@@ -126,9 +127,9 @@ static struct mtd_partition nor_partitions[] = {
 	}
 };
 
-static struct flash_platform_data nor_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data nor_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= nor_partitions,
 	.nr_parts	= ARRAY_SIZE(nor_partitions),
 };
@@ -139,7 +140,7 @@ static struct resource nor_resource = {
 };
 
 static struct platform_device nor_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &nor_data,

arch/arm/mach-omap1/board-innovator.c

@@ -22,16 +22,17 @@
 #include <linux/delay.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <plat/mux.h>
+#include <plat/flash.h>
 #include <plat/fpga.h>
 #include <mach/gpio.h>
 #include <plat/tc.h>
@@ -94,9 +95,9 @@ static struct mtd_partition innovator_partitions[] = {
 	}
 };
 
-static struct flash_platform_data innovator_flash_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data innovator_flash_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= innovator_partitions,
 	.nr_parts	= ARRAY_SIZE(innovator_partitions),
 };
@@ -108,7 +109,7 @@ static struct resource innovator_flash_resource = {
 };
 
 static struct platform_device innovator_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &innovator_flash_data,

arch/arm/mach-omap1/board-osk.c

@@ -37,6 +37,7 @@
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 
 #include <linux/i2c/tps65010.h>
 
@@ -46,8 +47,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
+#include <plat/flash.h>
 #include <plat/usb.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
@@ -94,9 +95,9 @@ static struct mtd_partition osk_partitions[] = {
 	}
 };
 
-static struct flash_platform_data osk_flash_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data osk_flash_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= osk_partitions,
 	.nr_parts	= ARRAY_SIZE(osk_partitions),
 };
@@ -107,7 +108,7 @@ static struct resource osk_flash_resource = {
 };
 
 static struct platform_device osk5912_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &osk_flash_data,

arch/arm/mach-omap1/board-palmte.c

@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/interrupt.h>
 #include <linux/apm-emulation.h>
@@ -31,9 +32,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
+#include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/tc.h>
@@ -126,9 +127,9 @@ static struct mtd_partition palmte_rom_partitions[] = {
 	},
 };
 
-static struct flash_platform_data palmte_rom_data = {
-	.map_name	= "map_rom",
+static struct physmap_flash_data palmte_rom_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= palmte_rom_partitions,
 	.nr_parts	= ARRAY_SIZE(palmte_rom_partitions),
 };
@@ -140,7 +141,7 @@ static struct resource palmte_rom_resource = {
 };
 
 static struct platform_device palmte_rom_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= -1,
 	.dev		= {
 		.platform_data	= &palmte_rom_data,

arch/arm/mach-omap1/board-palmtt.c

@@ -21,16 +21,17 @@
 #include <linux/interrupt.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/leds.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
 #include <plat/led.h>
 #include <mach/gpio.h>
+#include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/dma.h>
@@ -104,9 +105,9 @@ static struct mtd_partition palmtt_partitions[] = {
 	}
 };
 
-static struct flash_platform_data palmtt_flash_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data palmtt_flash_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= palmtt_partitions,
 	.nr_parts	= ARRAY_SIZE(palmtt_partitions),
 };
@@ -118,7 +119,7 @@ static struct resource palmtt_flash_resource = {
 };
 
 static struct platform_device palmtt_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &palmtt_flash_data,

arch/arm/mach-omap1/board-palmz71.c

@@ -25,14 +25,15 @@
 #include <linux/interrupt.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
+#include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/dma.h>
@@ -126,10 +127,9 @@ static struct mtd_partition palmz71_rom_partitions[] = {
 	},
 };
 
-static struct flash_platform_data palmz71_rom_data = {
-	.map_name	= "map_rom",
-	.name		= "onboardrom",
+static struct physmap_flash_data palmz71_rom_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= palmz71_rom_partitions,
 	.nr_parts	= ARRAY_SIZE(palmz71_rom_partitions),
 };
@@ -141,7 +141,7 @@ static struct resource palmz71_rom_resource = {
 };
 
 static struct platform_device palmz71_rom_device = {
-	.name	= "omapflash",
+	.name	= "physmap-flash",
 	.id	= -1,
 	.dev = {
 		.platform_data = &palmz71_rom_data,

arch/arm/mach-omap1/board-perseus2.c

@@ -18,19 +18,20 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <plat/tc.h>
 #include <mach/gpio.h>
 #include <plat/mux.h>
 #include <plat/fpga.h>
+#include <plat/flash.h>
 #include <plat/keypad.h>
 #include <plat/common.h>
 #include <plat/board.h>
@@ -117,9 +118,9 @@ static struct mtd_partition nor_partitions[] = {
 	},
 };
 
-static struct flash_platform_data nor_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data nor_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= nor_partitions,
 	.nr_parts	= ARRAY_SIZE(nor_partitions),
 };
@@ -131,7 +132,7 @@ static struct resource nor_resource = {
 };
 
 static struct platform_device nor_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &nor_data,

arch/arm/mach-omap1/board-sx1.c

@@ -22,6 +22,7 @@
 #include <linux/notifier.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/types.h>
 #include <linux/i2c.h>
 #include <linux/errno.h>
@@ -29,10 +30,10 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
+#include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/dma.h>
 #include <plat/irda.h>
@@ -287,9 +288,9 @@ static struct mtd_partition sx1_partitions[] = {
 	}
 };
 
-static struct flash_platform_data sx1_flash_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data sx1_flash_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= sx1_partitions,
 	.nr_parts	= ARRAY_SIZE(sx1_partitions),
 };
@@ -310,7 +311,7 @@ static struct resource sx1_old_flash_resource[] = {
 };
 
 static struct platform_device sx1_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &sx1_flash_data,
@@ -327,7 +328,7 @@ static struct resource sx1_new_flash_resource = {
 };
 
 static struct platform_device sx1_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &sx1_flash_data,

arch/arm/mach-omap1/board-voiceblue.c

@@ -18,6 +18,7 @@
 #include <linux/irq.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/mtd/physmap.h>
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/serial_8250.h>
@@ -27,11 +28,11 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <plat/common.h>
 #include <mach/gpio.h>
+#include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
 #include <plat/usb.h>
@@ -86,9 +87,9 @@ static int __init ext_uart_init(void)
 }
 arch_initcall(ext_uart_init);
 
-static struct flash_platform_data voiceblue_flash_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data voiceblue_flash_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 };
 
 static struct resource voiceblue_flash_resource = {
@@ -98,7 +99,7 @@ static struct resource voiceblue_flash_resource = {
 };
 
 static struct platform_device voiceblue_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &voiceblue_flash_data,

arch/arm/mach-omap1/clock.c

@@ -1,7 +1,7 @@
 /*
  *  linux/arch/arm/mach-omap1/clock.c
  *
- *  Copyright (C) 2004 - 2005, 2009 Nokia corporation
+ *  Copyright (C) 2004 - 2005, 2009-2010 Nokia Corporation
  *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
  *
  *  Modified to use omap shared clock framework by
@@ -38,26 +38,6 @@ struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
  * Omap1 specific clock functions
  *-------------------------------------------------------------------------*/
 
-static int clk_omap1_dummy_enable(struct clk *clk)
-{
-	return 0;
-}
-
-static void clk_omap1_dummy_disable(struct clk *clk)
-{
-}
-
-const struct clkops clkops_dummy = {
-	.enable		= clk_omap1_dummy_enable,
-	.disable	= clk_omap1_dummy_disable,
-};
-
-/* XXX can be replaced with a fixed_divisor_recalc */
-unsigned long omap1_watchdog_recalc(struct clk *clk)
-{
-	return clk->parent->rate / 14;
-}
-
 unsigned long omap1_uart_recalc(struct clk *clk)
 {
 	unsigned int val = __raw_readl(clk->enable_reg);
@@ -577,9 +557,6 @@ const struct clkops clkops_uart = {
 
 long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
 {
-	if (clk->flags & RATE_FIXED)
-		return clk->rate;
-
 	if (clk->round_rate != NULL)
 		return clk->round_rate(clk, rate);
 

arch/arm/mach-omap1/clock_data.c

@@ -1,7 +1,7 @@
 /*
  *  linux/arch/arm/mach-omap1/clock_data.c
  *
- *  Copyright (C) 2004 - 2005, 2009 Nokia corporation
+ *  Copyright (C) 2004 - 2005, 2009-2010 Nokia Corporation
  *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
  *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
  *
@@ -27,13 +27,6 @@
  * Omap1 clocks
  *-------------------------------------------------------------------------*/
 
-/* XXX is this necessary? */
-static struct clk dummy_ck = {
-	.name	= "dummy",
-	.ops	= &clkops_dummy,
-	.flags	= RATE_FIXED,
-};
-
 static struct clk ck_ref = {
 	.name		= "ck_ref",
 	.ops		= &clkops_null,
@@ -149,7 +142,8 @@ static struct arm_idlect1_clk armwdt_ck = {
 		.flags		= CLOCK_IDLE_CONTROL,
 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_WDTCK,
-		.recalc		= &omap1_watchdog_recalc,
+		.fixed_div	= 14,
+		.recalc		= &omap_fixed_divisor_recalc,
 	},
 	.idlect_shift	= 0,
 };
@@ -388,8 +382,7 @@ static struct uart_clk uart1_16xx = {
 		/* Direct from ULPD, no real parent */
 		.parent		= &armper_ck.clk,
 		.rate		= 48000000,
-		.flags		= RATE_FIXED | ENABLE_REG_32BIT |
-				  CLOCK_NO_IDLE_PARENT,
+		.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 		.enable_bit	= 29,
 	},
@@ -429,8 +422,7 @@ static struct uart_clk uart3_16xx = {
 		/* Direct from ULPD, no real parent */
 		.parent		= &armper_ck.clk,
 		.rate		= 48000000,
-		.flags		= RATE_FIXED | ENABLE_REG_32BIT |
-				  CLOCK_NO_IDLE_PARENT,
+		.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 		.enable_bit	= 31,
 	},
@@ -442,7 +434,7 @@ static struct clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
 	.rate		= 6000000,
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
+	.flags		= ENABLE_REG_32BIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
 	.enable_bit	= USB_MCLK_EN_BIT,
 };
@@ -452,7 +444,7 @@ static struct clk usb_hhc_ck1510 = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
+	.flags		= ENABLE_REG_32BIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= USB_HOST_HHC_UHOST_EN,
 };
@@ -463,7 +455,7 @@ static struct clk usb_hhc_ck16xx = {
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
 	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
+	.flags		= ENABLE_REG_32BIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
 	.enable_bit	= 8 /* UHOST_EN */,
 };
@@ -473,7 +465,6 @@ static struct clk usb_dc_ck = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
-	.flags		= RATE_FIXED,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= 4,
 };
@@ -483,7 +474,6 @@ static struct clk usb_dc_ck7xx = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
-	.flags		= RATE_FIXED,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= 8,
 };
@@ -493,7 +483,6 @@ static struct clk mclk_1510 = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
 	.rate		= 12000000,
-	.flags		= RATE_FIXED,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= 6,
 };
@@ -514,7 +503,6 @@ static struct clk bclk_1510 = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
 	.rate		= 12000000,
-	.flags		= RATE_FIXED,
 };
 
 static struct clk bclk_16xx = {
@@ -529,36 +517,34 @@ static struct clk bclk_16xx = {
 };
 
 static struct clk mmc1_ck = {
-	.name		= "mmc_ck",
+	.name		= "mmc1_ck",
 	.ops		= &clkops_generic,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
 	.parent		= &armper_ck.clk,
 	.rate		= 48000000,
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= 23,
 };
 
 static struct clk mmc2_ck = {
-	.name		= "mmc_ck",
-	.id		= 1,
+	.name		= "mmc2_ck",
 	.ops		= &clkops_generic,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
 	.parent		= &armper_ck.clk,
 	.rate		= 48000000,
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= 20,
 };
 
 static struct clk mmc3_ck = {
-	.name		= "mmc_ck",
-	.id		= 2,
+	.name		= "mmc3_ck",
 	.ops		= &clkops_generic,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
 	.parent		= &armper_ck.clk,
 	.rate		= 48000000,
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= 12,
 };
@@ -576,7 +562,6 @@ static struct clk virtual_ck_mpu = {
 remains active during MPU idle whenever this is enabled */
 static struct clk i2c_fck = {
 	.name		= "i2c_fck",
-	.id		= 1,
 	.ops		= &clkops_null,
 	.flags		= CLOCK_NO_IDLE_PARENT,
 	.parent		= &armxor_ck.clk,
@@ -585,7 +570,6 @@ static struct clk i2c_fck = {
 
 static struct clk i2c_ick = {
 	.name		= "i2c_ick",
-	.id		= 1,
 	.ops		= &clkops_null,
 	.flags		= CLOCK_NO_IDLE_PARENT,
 	.parent		= &armper_ck.clk,

arch/arm/mach-omap1/devices.c

@@ -73,7 +73,7 @@ static inline void omap_init_rtc(void) {}
 #  define INT_DSP_MAILBOX1	INT_1610_DSP_MAILBOX1
 #endif
 
-#define OMAP1_MBOX_BASE		OMAP1_IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
+#define OMAP1_MBOX_BASE		OMAP16XX_MAILBOX_BASE
 
 static struct resource mbox_resources[] = {
 	{

arch/arm/mach-omap1/flash.c

@@ -0,0 +1,33 @@
+/*
+ * Flash support for OMAP1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+
+#include <plat/io.h>
+#include <plat/tc.h>
+
+void omap1_set_vpp(struct map_info *map, int enable)
+{
+	static int count;
+	u32 l;
+
+	if (enable) {
+		if (count++ == 0) {
+			l = omap_readl(EMIFS_CONFIG);
+			l |= OMAP_EMIFS_CONFIG_WP;
+			omap_writel(l, EMIFS_CONFIG);
+		}
+	} else {
+		if (count && (--count == 0)) {
+			l = omap_readl(EMIFS_CONFIG);
+			l &= ~OMAP_EMIFS_CONFIG_WP;
+			omap_writel(l, EMIFS_CONFIG);
+		}
+	}
+}

arch/arm/mach-omap1/i2c.c

@@ -23,9 +23,7 @@
 #include <plat/mux.h>
 #include <plat/cpu.h>
 
-int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
-			  struct i2c_board_info const *info,
-			  unsigned len)
+void __init omap1_i2c_mux_pins(int bus_id)
 {
 	if (cpu_is_omap7xx()) {
 		omap_cfg_reg(I2C_7XX_SDA);
@@ -34,6 +32,4 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
 		omap_cfg_reg(I2C_SDA);
 		omap_cfg_reg(I2C_SCL);
 	}
-
-	return omap_plat_register_i2c_bus(bus_id, clkrate, info, len);
 }

arch/arm/mach-omap1/include/mach/debug-macro.S

@@ -11,18 +11,80 @@
  *
 */
 
+#include <linux/serial_reg.h>
+
+#include <plat/serial.h>
+
+		.pushsection .data
+omap_uart_phys:	.word	0x0
+omap_uart_virt:	.word	0x0
+		.popsection
+
+		/*
+		 * Note that this code won't work if the bootloader passes
+		 * a wrong machine ID number in r1. To debug, just hardcode
+		 * the desired UART phys and virt addresses temporarily into
+		 * the omap_uart_phys and omap_uart_virt above.
+		 */
 		.macro	addruart, rx, tmp
+
+		/* Use omap_uart_phys/virt if already configured */
+9:		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		ldreq	\rx, =omap_uart_phys	@ physical base address
+		ldrne	\rx, =omap_uart_virt	@ virtual base
+		ldr	\rx, [\rx, #0]
+		cmp	\rx, #0			@ is port configured?
+		bne	99f			@ already configured
+
+		/* Check 7XX UART1 scratchpad register for uart to use */
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0xff000000	@ physical base address
+		movne	\rx, #0xfe000000	@ virtual base
+		orr	\rx, \rx, #0x00fb0000	@ OMAP1UART1
+		ldrb	\rx, [\rx, #(UART_SCR << OMAP7XX_PORT_SHIFT)]
+		cmp	\rx, #0			@ anything in 7XX scratchpad?
+		bne	10f			@ found 7XX uart
+
+		/* Check 15xx/16xx UART1 scratchpad register for uart to use */
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0xff000000	@ physical base address
 		movne	\rx, #0xfe000000	@ virtual base
-		orr	\rx, \rx, #0x00fb0000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
-		orr	\rx, \rx, #0x00009000	@ UART 3
-#endif
-#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
-		orr	\rx, \rx, #0x00000800	@ UART 2 & 3
-#endif
+		orr	\rx, \rx, #0x00fb0000	@ OMAP1UART1
+		ldrb	\rx, [\rx, #(UART_SCR << OMAP_PORT_SHIFT)]
+
+		/* Select the UART to use based on the UART1 scratchpad value */
+10:		cmp	\rx, #0			@ no port configured?
+		beq	11f			@ if none, try to use UART1
+		cmp	\rx, #OMAP1UART1
+		beq	11f			@ configure OMAP1UART1
+		cmp	\rx, #OMAP1UART2
+		beq	12f			@ configure OMAP1UART2
+		cmp	\rx, #OMAP1UART3
+		beq	13f			@ configure OMAP2UART3
+
+		/* Configure the UART offset from the phys/virt base */
+11:		mov	\rx, #0x00fb0000	@ OMAP1UART1
+		b	98f
+12:		mov	\rx, #0x00fb0000	@ OMAP1UART1
+		orr	\rx, \rx, #0x00000800	@ OMAP1UART2
+		b	98f
+13:		mov	\rx, #0x00fb0000	@ OMAP1UART1
+		orr	\rx, \rx, #0x00000800	@ OMAP1UART2
+		orr	\rx, \rx, #0x00009000	@ OMAP1UART3
+
+		/* Store both phys and virt address for the uart */
+98:		add	\rx, \rx, #0xff000000	@ phys base
+		ldr	\tmp, =omap_uart_phys
+		str	\rx, [\tmp, #0]
+		sub	\rx, \rx, #0xff000000	@ phys base
+		add	\rx, \rx, #0xfe000000	@ virt base
+		ldr	\tmp, =omap_uart_virt
+		str	\rx, [\tmp, #0]
+		b	9b
+99:
 		.endm
 
 		.macro	senduart,rd,rx
@@ -30,13 +92,13 @@
 		.endm
 
 		.macro	busyuart,rd,rx
-1001:		ldrb	\rd, [\rx, #(0x5 << 2)]	@ OMAP-1510 and friends
-		and	\rd, \rd, #0x60
-		teq	\rd, #0x60
+1001:		ldrb	\rd, [\rx, #(UART_LSR << OMAP_PORT_SHIFT)]
+		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
+		teq	\rd, #(UART_LSR_TEMT | UART_LSR_THRE)
 		beq	1002f
-		ldrb	\rd, [\rx, #(0x5 << 0)]	@ OMAP-730 only
-		and	\rd, \rd, #0x60
-		teq	\rd, #0x60
+		ldrb	\rd, [\rx, #(UART_LSR << OMAP7XX_PORT_SHIFT)]
+		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
+		teq	\rd, #(UART_LSR_TEMT | UART_LSR_THRE)
 		bne	1001b
 1002:
 		.endm

arch/arm/mach-omap1/mailbox.c

@@ -146,7 +146,6 @@ EXPORT_SYMBOL(mbox_dsp_info);
 static int __devinit omap1_mbox_probe(struct platform_device *pdev)
 {
 	struct resource *res;
-	int ret = 0;
 
 	if (pdev->num_resources != 2) {
 		dev_err(&pdev->dev, "invalid number of resources: %d\n",
@@ -160,12 +159,18 @@ static int __devinit omap1_mbox_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "invalid mem resource\n");
 		return -ENODEV;
 	}
-	mbox_base = res->start;
+
+	mbox_base = ioremap(res->start, resource_size(res));
+	if (!mbox_base) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		return -ENODEV;
+	}
 
 	/* DSP IRQ */
 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (unlikely(!res)) {
 		dev_err(&pdev->dev, "invalid irq resource\n");
+		iounmap(mbox_base);
 		return -ENODEV;
 	}
 	mbox_dsp_info.irq = res->start;

arch/arm/mach-omap1/mcbsp.c

@@ -99,9 +99,11 @@ static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = {
 	},
 };
 #define OMAP7XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap7xx_mcbsp_pdata)
+#define OMAP7XX_MCBSP_REG_NUM		(OMAP_MCBSP_REG_XCERH / sizeof(u16) + 1)
 #else
 #define omap7xx_mcbsp_pdata		NULL
 #define OMAP7XX_MCBSP_PDATA_SZ		0
+#define OMAP7XX_MCBSP_REG_NUM		0
 #endif
 
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -132,9 +134,11 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 	},
 };
 #define OMAP15XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap15xx_mcbsp_pdata)
+#define OMAP15XX_MCBSP_REG_NUM		(OMAP_MCBSP_REG_XCERH / sizeof(u16) + 1)
 #else
 #define omap15xx_mcbsp_pdata		NULL
 #define OMAP15XX_MCBSP_PDATA_SZ		0
+#define OMAP15XX_MCBSP_REG_NUM		0
 #endif
 
 #ifdef CONFIG_ARCH_OMAP16XX
@@ -165,19 +169,25 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 	},
 };
 #define OMAP16XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap16xx_mcbsp_pdata)
+#define OMAP16XX_MCBSP_REG_NUM		(OMAP_MCBSP_REG_XCERH / sizeof(u16) + 1)
 #else
 #define omap16xx_mcbsp_pdata		NULL
 #define OMAP16XX_MCBSP_PDATA_SZ		0
+#define OMAP16XX_MCBSP_REG_NUM		0
 #endif
 
 int __init omap1_mcbsp_init(void)
 {
-	if (cpu_is_omap7xx())
+	if (cpu_is_omap7xx()) {
 		omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ;
-	if (cpu_is_omap15xx())
+		omap_mcbsp_cache_size = OMAP7XX_MCBSP_REG_NUM * sizeof(u16);
+	} else if (cpu_is_omap15xx()) {
 		omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ;
-	if (cpu_is_omap16xx())
+		omap_mcbsp_cache_size = OMAP15XX_MCBSP_REG_NUM * sizeof(u16);
+	} else if (cpu_is_omap16xx()) {
 		omap_mcbsp_count = OMAP16XX_MCBSP_PDATA_SZ;
+		omap_mcbsp_cache_size = OMAP16XX_MCBSP_REG_NUM * sizeof(u16);
+	}
 
 	mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
 								GFP_KERNEL);

arch/arm/mach-omap1/serial.c

@@ -64,7 +64,7 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p)
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.mapbase	= OMAP_UART1_BASE,
+		.mapbase	= OMAP1_UART1_BASE,
 		.irq		= INT_UART1,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
@@ -72,7 +72,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.mapbase	= OMAP_UART2_BASE,
+		.mapbase	= OMAP1_UART2_BASE,
 		.irq		= INT_UART2,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
@@ -80,7 +80,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.mapbase	= OMAP_UART3_BASE,
+		.mapbase	= OMAP1_UART3_BASE,
 		.irq		= INT_UART3,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,

arch/arm/mach-omap2/Kconfig

@@ -1,28 +1,19 @@
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
 
-config ARCH_OMAP24XX
-	bool "OMAP24xx Based System"
-	depends on ARCH_OMAP2
-
 config ARCH_OMAP2420
 	bool "OMAP2420 support"
-	depends on ARCH_OMAP24XX
+	depends on ARCH_OMAP2
 	select OMAP_DM_TIMER
 	select ARCH_OMAP_OTG
 
 config ARCH_OMAP2430
 	bool "OMAP2430 support"
-	depends on ARCH_OMAP24XX
-
-config ARCH_OMAP34XX
-	bool "OMAP34xx Based System"
-	depends on ARCH_OMAP3
-	select USB_ARCH_HAS_EHCI
+	depends on ARCH_OMAP2
 
 config ARCH_OMAP3430
 	bool "OMAP3430 support"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select ARCH_OMAP_OTG
 
 config OMAP_PACKAGE_CBC
@@ -38,11 +29,11 @@ config OMAP_PACKAGE_CBP
        bool
 
 comment "OMAP Board Type"
-	depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
+	depends on ARCH_OMAP2PLUS
 
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
-	depends on ARCH_OMAP2 && ARCH_OMAP24XX
+	depends on ARCH_OMAP2
 
 config MACH_OMAP2_TUSB6010
 	bool
@@ -51,55 +42,59 @@ config MACH_OMAP2_TUSB6010
 
 config MACH_OMAP_H4
 	bool "OMAP 2420 H4 board"
-	depends on ARCH_OMAP2 && ARCH_OMAP24XX
+	depends on ARCH_OMAP2
 	select OMAP_DEBUG_DEVICES
 
 config MACH_OMAP_APOLLON
 	bool "OMAP 2420 Apollon board"
-	depends on ARCH_OMAP2 && ARCH_OMAP24XX
+	depends on ARCH_OMAP2
 
 config MACH_OMAP_2430SDP
 	bool "OMAP 2430 SDP board"
-	depends on ARCH_OMAP2 && ARCH_OMAP24XX
+	depends on ARCH_OMAP2
 
 config MACH_OMAP3_BEAGLE
 	bool "OMAP3 BEAGLE board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
+config MACH_DEVKIT8000
+        bool "DEVKIT8000 board"
+        depends on ARCH_OMAP3
+
 config MACH_OMAP_LDP
 	bool "OMAP3 LDP board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_OVERO
 	bool "Gumstix Overo board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3EVM
 	bool "OMAP 3530 EVM board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3517EVM
 	bool "OMAP3517/ AM3517 EVM board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3_PANDORA
 	bool "OMAP3 Pandora"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3_TOUCHBOOK
 	bool "OMAP3 Touch Book"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select BACKLIGHT_CLASS_DEVICE
 
 config MACH_OMAP_3430SDP
 	bool "OMAP 3430 SDP board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_NOKIA_N800
@@ -120,33 +115,33 @@ config MACH_NOKIA_N8X0
 
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP_ZOOM2
 	bool "OMAP3 Zoom2 board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP_ZOOM3
 	bool "OMAP3630 Zoom3 board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBP
 
 config MACH_CM_T35
 	bool "CompuLab CM-T35 module"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CUS
 	select OMAP_MUX
 
 config MACH_IGEP0020
-	bool "IGEP0020"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	bool "IGEP v2 board"
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP_3630SDP
 	bool "OMAP3630 SDP board"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBP
 
 config MACH_OMAP_4430SDP
@@ -162,7 +157,7 @@ config OMAP3_EMU
 
 config OMAP3_SDRC_AC_TIMING
 	bool "Enable SDRC AC timing register changes"
-	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	depends on ARCH_OMAP3
 	default n
 	help
 	  If you know that none of your system initiators will attempt to

arch/arm/mach-omap2/Makefile

@@ -5,15 +5,17 @@
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
 
-omap-2-3-common				= irq.o sdrc.o omap_hwmod.o
-omap-3-4-common				= dpll.o
+omap-2-3-common				= irq.o sdrc.o
+hwmod-common				= omap_hwmod.o \
+					  omap_hwmod_common_data.o
 prcm-common				= prcm.o powerdomain.o
-clock-common				= clock.o clock_common_data.o clockdomain.o
+clock-common				= clock.o clock_common_data.o \
+					  clockdomain.o clkt_dpll.o \
+					  clkt_clksel.o
 
-obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common)
-obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common) \
-			    $(omap-3-4-common)
-obj-$(CONFIG_ARCH_OMAP4) += $(omap-3-4-common) prcm.o clock.o
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
+obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common)
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
@@ -26,6 +28,10 @@ obj-$(CONFIG_ARCH_OMAP2420)		+= sram242x.o
 obj-$(CONFIG_ARCH_OMAP2430)		+= sram243x.o
 obj-$(CONFIG_ARCH_OMAP3)		+= sram34xx.o
 
+AFLAGS_sram242x.o			:=-Wa,-march=armv6
+AFLAGS_sram243x.o			:=-Wa,-march=armv6
+AFLAGS_sram34xx.o			:=-Wa,-march=armv7-a
+
 # Pin multiplexing
 obj-$(CONFIG_ARCH_OMAP3)		+= mux34xx.o
 
@@ -36,9 +42,13 @@ obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
 # Power Management
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
-obj-$(CONFIG_ARCH_OMAP24XX)		+= sleep24xx.o
+obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o cpuidle34xx.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
+
+AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
+AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a
+
 endif
 
 # PRCM
@@ -47,14 +57,31 @@ obj-$(CONFIG_ARCH_OMAP3)		+= cm.o
 obj-$(CONFIG_ARCH_OMAP4)		+= cm4xxx.o
 
 # Clock framework
-obj-$(CONFIG_ARCH_OMAP2)		+= clock2xxx.o clock2xxx_data.o
+obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common) clock2xxx.o \
+					   clkt2xxx_sys.o \
+					   clkt2xxx_dpllcore.o \
+					   clkt2xxx_virt_prcm_set.o \
+					   clkt2xxx_apll.o clkt2xxx_osc.o
+obj-$(CONFIG_ARCH_OMAP2420)		+= clock2420_data.o
+obj-$(CONFIG_ARCH_OMAP2430)		+= clock2430.o clock2430_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= $(clock-common) clock3xxx.o \
+					   clock34xx.o clkt34xx_dpll3m2.o \
+					   clock3517.o clock36xx.o \
+					   dpll3xxx.o clock3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) clock44xx_data.o \
+					   dpll3xxx.o
+
+# OMAP2 clock rate set data (old "OPP" data)
 obj-$(CONFIG_ARCH_OMAP2420)		+= opp2420_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o clock34xx_data.o
 obj-$(CONFIG_ARCH_OMAP2430)		+= opp2430_data.o
-obj-$(CONFIG_ARCH_OMAP4)		+= clock44xx.o clock44xx_data.o
+
+# hwmod data
+obj-$(CONFIG_ARCH_OMAP2420)		+= omap_hwmod_2420_data.o
+obj-$(CONFIG_ARCH_OMAP2430)		+= omap_hwmod_2430_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_3xxx_data.o
 
 # EMU peripherals
-obj-$(CONFIG_OMAP3_EMU)		+= emu.o
+obj-$(CONFIG_OMAP3_EMU)			+= emu.o
 
 obj-$(CONFIG_OMAP_MBOX_FWK)		+= mailbox_mach.o
 mailbox_mach-objs			:= mailbox.o
@@ -71,45 +98,48 @@ obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
 obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o \
-					   mmc-twl4030.o
+					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_APOLLON)		+= board-apollon.o
 obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o \
-					   mmc-twl4030.o
+					   hsmmc.o
+obj-$(CONFIG_MACH_DEVKIT8000)     	+= board-devkit8000.o \
+                                           hsmmc.o
 obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o \
-					   mmc-twl4030.o
+					   hsmmc.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
-					   mmc-twl4030.o
+					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o \
-					   mmc-twl4030.o
+					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
-					   mmc-twl4030.o
+					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
-					   mmc-twl4030.o
+					   hsmmc.o \
+					   board-sdp-flash.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   board-rx51-sdram.o \
 					   board-rx51-peripherals.o \
-					   mmc-twl4030.o
+					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom2.o \
 					   board-zoom-peripherals.o \
-					   mmc-twl4030.o \
+					   hsmmc.o \
 					   board-zoom-debugboard.o
 obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom3.o \
 					   board-zoom-peripherals.o \
-					   mmc-twl4030.o \
+					   hsmmc.o \
 					   board-zoom-debugboard.o
 obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-3630sdp.o \
 					   board-zoom-peripherals.o \
-					   mmc-twl4030.o
+					   hsmmc.o
 obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o \
-					   mmc-twl4030.o
+					   hsmmc.o
 obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o \
-					   mmc-twl4030.o
+					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o \
-					   mmc-twl4030.o
+					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
 
-obj-$(CONFIG_MACH_OMAP3517EVM)     += board-am3517evm.o
+obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o
 
 # Platform specific device init code
 obj-y					+= usb-musb.o
@@ -119,5 +149,8 @@ obj-y					+= usb-ehci.o
 onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
 obj-y					+= $(onenand-m) $(onenand-y)
 
+nand-$(CONFIG_MTD_NAND_OMAP2)		:= gpmc-nand.o
+obj-y					+= $(nand-m) $(nand-y)
+
 smc91x-$(CONFIG_SMC91X)			:= gpmc-smc91x.o
 obj-y					+= $(smc91x-m) $(smc91x-y)

arch/arm/mach-omap2/board-2430sdp.c

@@ -18,6 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/delay.h>
 #include <linux/i2c/twl.h>
 #include <linux/err.h>
@@ -28,7 +29,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
 #include <plat/mux.h>
@@ -38,7 +38,7 @@
 #include <plat/usb.h>
 #include <plat/gpmc-smc91x.h>
 
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
 
 #define SDP2430_CS0_BASE	0x04000000
 #define SECONDARY_LCD_GPIO		147
@@ -74,8 +74,7 @@ static struct mtd_partition sdp2430_partitions[] = {
 	}
 };
 
-static struct flash_platform_data sdp2430_flash_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data sdp2430_flash_data = {
 	.width		= 2,
 	.parts		= sdp2430_partitions,
 	.nr_parts	= ARRAY_SIZE(sdp2430_partitions),
@@ -88,7 +87,7 @@ static struct resource sdp2430_flash_resource = {
 };
 
 static struct platform_device sdp2430_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev = {
 		.platform_data	= &sdp2430_flash_data,
@@ -183,7 +182,7 @@ static int __init omap2430_i2c_init(void)
 	return 0;
 }
 
-static struct twl4030_hsmmc_info mmc[] __initdata = {
+static struct omap2_hsmmc_info mmc[] __initdata = {
 	{
 		.mmc		= 1,
 		.wires		= 4,
@@ -194,6 +193,12 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
 	{}	/* Terminator */
 };
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init omap_2430sdp_init(void)
 {
 	int ret;
@@ -202,8 +207,8 @@ static void __init omap_2430sdp_init(void)
 
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
 	omap_serial_init();
-	twl4030_mmc_init(mmc);
-	usb_musb_init();
+	omap2_hsmmc_init(mmc);
+	usb_musb_init(&musb_board_data);
 	board_smc91x_init();
 
 	/* Turn off secondary LCD backlight */
@@ -215,7 +220,7 @@ static void __init omap_2430sdp_init(void)
 static void __init omap_2430sdp_map_io(void)
 {
 	omap2_set_globals_243x();
-	omap2_map_common_io();
+	omap243x_map_common_io();
 }
 
 MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")

arch/arm/mach-omap2/board-3430sdp.c

@@ -41,9 +41,12 @@
 #include <plat/control.h>
 #include <plat/gpmc-smc91x.h>
 
+#include <mach/board-sdp.h>
+
 #include "mux.h"
 #include "sdram-qimonda-hyb18m512160af-6.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
+#include "pm.h"
 
 #define CONFIG_DISABLE_HFCLK 1
 
@@ -55,6 +58,24 @@
 
 #define TWL4030_MSECURE_GPIO 22
 
+/* FIXME: These values need to be updated based on more profiling on 3430sdp*/
+static struct cpuidle_params omap3_cpuidle_params_table[] = {
+	/* C1 */
+	{1, 2, 2, 5},
+	/* C2 */
+	{1, 10, 10, 30},
+	/* C3 */
+	{1, 50, 50, 300},
+	/* C4 */
+	{1, 1500, 1800, 4000},
+	/* C5 */
+	{1, 2500, 7500, 12000},
+	/* C6 */
+	{1, 3000, 8500, 15000},
+	/* C7 */
+	{1, 10000, 30000, 300000},
+};
+
 static int board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
@@ -305,6 +326,7 @@ static void __init omap_3430sdp_init_irq(void)
 {
 	omap_board_config = sdp3430_config;
 	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
+	omap3_pm_init_cpuidle(omap3_cpuidle_params_table);
 	omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
 	omap_init_irq();
 	omap_gpio_init();
@@ -326,7 +348,7 @@ static struct twl4030_bci_platform_data sdp3430_bci_data = {
 	.tblsize		= ARRAY_SIZE(sdp3430_batt_table),
 };
 
-static struct twl4030_hsmmc_info mmc[] = {
+static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
 		/* 8 bits (default) requires S6.3 == ON,
@@ -363,7 +385,7 @@ static int sdp3430_twl_gpio_setup(struct device *dev,
 	 */
 	mmc[0].gpio_cd = gpio + 0;
 	mmc[1].gpio_cd = gpio + 1;
-	twl4030_mmc_init(mmc);
+	omap2_hsmmc_init(mmc);
 
 	/* link regulators to MMC adapters ... we "know" the
 	 * regulators will be set up only *after* we return.
@@ -650,6 +672,120 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+static struct mtd_partition sdp_nor_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+		.name		= "Bootloader-NOR",
+		.offset		= 0,
+		.size		= SZ_256K,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+		.name		= "Params-NOR",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_256K,
+		.mask_flags	= 0,
+	},
+	/* kernel */
+	{
+		.name		= "Kernel-NOR",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_2M,
+		.mask_flags	= 0
+	},
+	/* file system */
+	{
+		.name		= "Filesystem-NOR",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0
+	}
+};
+
+static struct mtd_partition sdp_onenand_partitions[] = {
+	{
+		.name		= "X-Loader-OneNAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE  /* force read-only */
+	},
+	{
+		.name		= "U-Boot-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 2 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE  /* force read-only */
+	},
+	{
+		.name		= "U-Boot Environment-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1 * (64 * 2048),
+	},
+	{
+		.name		= "Kernel-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 16 * (64 * 2048),
+	},
+	{
+		.name		= "File System-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition sdp_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader-NAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 10 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "Boot Env-NAND",
+
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1c0000 */
+		.size		= 6 * (64 * 2048),
+	},
+	{
+		.name		= "Kernel-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.size		= 40 * (64 * 2048),
+	},
+	{
+		.name		= "File System - NAND",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x780000 */
+	},
+};
+
+static struct flash_partitions sdp_flash_partitions[] = {
+	{
+		.parts = sdp_nor_partitions,
+		.nr_parts = ARRAY_SIZE(sdp_nor_partitions),
+	},
+	{
+		.parts = sdp_onenand_partitions,
+		.nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
+	},
+	{
+		.parts = sdp_nand_partitions,
+		.nr_parts = ARRAY_SIZE(sdp_nand_partitions),
+	},
+};
+
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init omap_3430sdp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -664,8 +800,9 @@ static void __init omap_3430sdp_init(void)
 				ARRAY_SIZE(sdp3430_spi_board_info));
 	ads7846_dev_init();
 	omap_serial_init();
-	usb_musb_init();
+	usb_musb_init(&musb_board_data);
 	board_smc91x_init();
+	sdp_flash_init(sdp_flash_partitions);
 	sdp3430_display_init();
 	enable_board_wakeup_source();
 	usb_ehci_init(&ehci_pdata);
@@ -674,7 +811,7 @@ static void __init omap_3430sdp_init(void)
 static void __init omap_3430sdp_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")

arch/arm/mach-omap2/board-3630sdp.c

@@ -68,8 +68,8 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 static void __init omap_sdp_map_io(void)
 {
-	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap2_set_globals_36xx();
+	omap34xx_map_common_io();
 }
 
 static struct omap_board_config_kernel sdp_config[] __initdata = {

arch/arm/mach-omap2/board-4430sdp.c

@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/usb/otg.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -27,6 +28,7 @@
 #include <plat/common.h>
 #include <plat/control.h>
 #include <plat/timer-gp.h>
+#include <plat/usb.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 
@@ -39,10 +41,6 @@ static struct platform_device *sdp4430_devices[] __initdata = {
 	&sdp4430_lcd_device,
 };
 
-static struct omap_uart_config sdp4430_uart_config __initdata = {
-	.enabled_uarts	= (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3),
-};
-
 static struct omap_lcd_config sdp4430_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
@@ -131,17 +129,27 @@ static void __init omap_4430sdp_init_irq(void)
 	omap_gpio_init();
 }
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_UTMI,
+	.mode			= MUSB_PERIPHERAL,
+	.power			= 100,
+};
 
 static void __init omap_4430sdp_init(void)
 {
 	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
 	omap_serial_init();
+	/* OMAP4 SDP uses internal transceiver so register nop transceiver */
+	usb_nop_xceiv_register();
+	/* FIXME: allow multi-omap to boot until musb is updated for omap4 */
+	if (!cpu_is_omap44xx())
+		usb_musb_init(&musb_board_data);
 }
 
 static void __init omap_4430sdp_map_io(void)
 {
 	omap2_set_globals_443x();
-	omap2_map_common_io();
+	omap44xx_map_common_io();
 }
 
 MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")

arch/arm/mach-omap2/board-am3517evm.c

@@ -20,8 +20,10 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/i2c/pca953x.h>
 
 #include <mach/hardware.h>
+#include <mach/am35xx.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -29,9 +31,228 @@
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/usb.h>
+#include <plat/display.h>
 
 #include "mux.h"
 
+#define LCD_PANEL_PWR		176
+#define LCD_PANEL_BKLIGHT_PWR	182
+#define LCD_PANEL_PWM		181
+
+static struct i2c_board_info __initdata am3517evm_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("s35390a", 0x30),
+		.type		= "s35390a",
+	},
+};
+
+/*
+ * RTC - S35390A
+ */
+#define GPIO_RTCS35390A_IRQ	55
+
+static void __init am3517_evm_rtc_init(void)
+{
+	int r;
+
+	omap_mux_init_gpio(GPIO_RTCS35390A_IRQ, OMAP_PIN_INPUT_PULLUP);
+	r = gpio_request(GPIO_RTCS35390A_IRQ, "rtcs35390a-irq");
+	if (r < 0) {
+		printk(KERN_WARNING "failed to request GPIO#%d\n",
+				GPIO_RTCS35390A_IRQ);
+		return;
+	}
+	r = gpio_direction_input(GPIO_RTCS35390A_IRQ);
+	if (r < 0) {
+		printk(KERN_WARNING "GPIO#%d cannot be configured as input\n",
+				GPIO_RTCS35390A_IRQ);
+		gpio_free(GPIO_RTCS35390A_IRQ);
+		return;
+	}
+	am3517evm_i2c_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ);
+}
+
+/*
+ * I2C GPIO Expander - TCA6416
+ */
+
+/* Mounted on Base-Board */
+static struct pca953x_platform_data am3517evm_gpio_expander_info_0 = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+};
+static struct i2c_board_info __initdata am3517evm_tca6416_info_0[] = {
+	{
+		I2C_BOARD_INFO("tca6416", 0x21),
+		.platform_data = &am3517evm_gpio_expander_info_0,
+	},
+};
+
+/* Mounted on UI Card */
+static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_1 = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES + 16,
+};
+static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_2 = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES + 32,
+};
+static struct i2c_board_info __initdata am3517evm_ui_tca6416_info[] = {
+	{
+		I2C_BOARD_INFO("tca6416", 0x20),
+		.platform_data = &am3517evm_ui_gpio_expander_info_1,
+	},
+	{
+		I2C_BOARD_INFO("tca6416", 0x21),
+		.platform_data = &am3517evm_ui_gpio_expander_info_2,
+	},
+};
+
+static int __init am3517_evm_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 400, NULL, 0);
+	omap_register_i2c_bus(2, 400, am3517evm_tca6416_info_0,
+			ARRAY_SIZE(am3517evm_tca6416_info_0));
+	omap_register_i2c_bus(3, 400, am3517evm_ui_tca6416_info,
+			ARRAY_SIZE(am3517evm_ui_tca6416_info));
+
+	return 0;
+}
+
+static int lcd_enabled;
+static int dvi_enabled;
+
+static void __init am3517_evm_display_init(void)
+{
+	int r;
+
+	omap_mux_init_gpio(LCD_PANEL_PWR, OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_gpio(LCD_PANEL_BKLIGHT_PWR, OMAP_PIN_INPUT_PULLDOWN);
+	omap_mux_init_gpio(LCD_PANEL_PWM, OMAP_PIN_INPUT_PULLDOWN);
+	/*
+	 * Enable GPIO 182 = LCD Backlight Power
+	 */
+	r = gpio_request(LCD_PANEL_BKLIGHT_PWR, "lcd_backlight_pwr");
+	if (r) {
+		printk(KERN_ERR "failed to get lcd_backlight_pwr\n");
+		return;
+	}
+	gpio_direction_output(LCD_PANEL_BKLIGHT_PWR, 1);
+	/*
+	 * Enable GPIO 181 = LCD Panel PWM
+	 */
+	r = gpio_request(LCD_PANEL_PWM, "lcd_pwm");
+	if (r) {
+		printk(KERN_ERR "failed to get lcd_pwm\n");
+		goto err_1;
+	}
+	gpio_direction_output(LCD_PANEL_PWM, 1);
+	/*
+	 * Enable GPIO 176 = LCD Panel Power enable pin
+	 */
+	r = gpio_request(LCD_PANEL_PWR, "lcd_panel_pwr");
+	if (r) {
+		printk(KERN_ERR "failed to get lcd_panel_pwr\n");
+		goto err_2;
+	}
+	gpio_direction_output(LCD_PANEL_PWR, 1);
+
+	printk(KERN_INFO "Display initialized successfully\n");
+	return;
+
+err_2:
+	gpio_free(LCD_PANEL_PWM);
+err_1:
+	gpio_free(LCD_PANEL_BKLIGHT_PWR);
+}
+
+static int am3517_evm_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+	if (dvi_enabled) {
+		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+		return -EINVAL;
+	}
+	gpio_set_value(LCD_PANEL_PWR, 1);
+	lcd_enabled = 1;
+
+	return 0;
+}
+
+static void am3517_evm_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(LCD_PANEL_PWR, 0);
+	lcd_enabled = 0;
+}
+
+static struct omap_dss_device am3517_evm_lcd_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "lcd",
+	.driver_name		= "sharp_lq_panel",
+	.phy.dpi.data_lines 	= 16,
+	.platform_enable	= am3517_evm_panel_enable_lcd,
+	.platform_disable	= am3517_evm_panel_disable_lcd,
+};
+
+static int am3517_evm_panel_enable_tv(struct omap_dss_device *dssdev)
+{
+	return 0;
+}
+
+static void am3517_evm_panel_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+static struct omap_dss_device am3517_evm_tv_device = {
+	.type 			= OMAP_DISPLAY_TYPE_VENC,
+	.name 			= "tv",
+	.driver_name		= "venc",
+	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+	.platform_enable	= am3517_evm_panel_enable_tv,
+	.platform_disable	= am3517_evm_panel_disable_tv,
+};
+
+static int am3517_evm_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+	if (lcd_enabled) {
+		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+		return -EINVAL;
+	}
+	dvi_enabled = 1;
+
+	return 0;
+}
+
+static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+	dvi_enabled = 0;
+}
+
+static struct omap_dss_device am3517_evm_dvi_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "dvi",
+	.driver_name		= "generic_panel",
+	.phy.dpi.data_lines	= 24,
+	.platform_enable	= am3517_evm_panel_enable_dvi,
+	.platform_disable	= am3517_evm_panel_disable_dvi,
+};
+
+static struct omap_dss_device *am3517_evm_dss_devices[] = {
+	&am3517_evm_lcd_device,
+	&am3517_evm_tv_device,
+	&am3517_evm_dvi_device,
+};
+
+static struct omap_dss_board_info am3517_evm_dss_data = {
+	.num_devices	= ARRAY_SIZE(am3517_evm_dss_devices),
+	.devices	= am3517_evm_dss_devices,
+	.default_device	= &am3517_evm_lcd_device,
+};
+
+struct platform_device am3517_evm_dss_device = {
+	.name		= "omapdss",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &am3517_evm_dss_data,
+	},
+};
+
 /*
  * Board initialization
  */
@@ -39,6 +260,7 @@ static struct omap_board_config_kernel am3517_evm_config[] __initdata = {
 };
 
 static struct platform_device *am3517_evm_devices[] __initdata = {
+	&am3517_evm_dss_device,
 };
 
 static void __init am3517_evm_init_irq(void)
@@ -72,18 +294,31 @@ static struct omap_board_mux board_mux[] __initdata = {
 
 static void __init am3517_evm_init(void)
 {
+	am3517_evm_i2c_init();
+
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	platform_add_devices(am3517_evm_devices,
 				ARRAY_SIZE(am3517_evm_devices));
 
 	omap_serial_init();
+
+	/* Configure GPIO for EHCI port */
+	omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
 	usb_ehci_init(&ehci_pdata);
+	/* DSS */
+	am3517_evm_display_init();
+
+	/* RTC - S35390A */
+	am3517_evm_rtc_init();
+
+	i2c_register_board_info(1, am3517evm_i2c_boardinfo,
+				ARRAY_SIZE(am3517evm_i2c_boardinfo));
 }
 
 static void __init am3517_evm_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")

arch/arm/mach-omap2/board-apollon.c

@@ -337,7 +337,7 @@ static void __init omap_apollon_init(void)
 static void __init omap_apollon_map_io(void)
 {
 	omap2_set_globals_242x();
-	omap2_map_common_io();
+	omap242x_map_common_io();
 }
 
 MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")

arch/arm/mach-omap2/board-cm-t35.c

@@ -32,6 +32,9 @@
 #include <linux/i2c/twl.h>
 #include <linux/regulator/machine.h>
 
+#include <linux/spi/spi.h>
+#include <linux/spi/tdo24m.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -41,12 +44,13 @@
 #include <plat/nand.h>
 #include <plat/gpmc.h>
 #include <plat/usb.h>
+#include <plat/display.h>
 
 #include <mach/hardware.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
 
 #define CM_T35_GPIO_PENDOWN	57
 
@@ -248,7 +252,6 @@ static inline void cm_t35_init_nand(void) {}
 
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-#include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
 #include <plat/mcspi.h>
@@ -304,6 +307,193 @@ static void __init cm_t35_init_ads7846(void)
 static inline void cm_t35_init_ads7846(void) {}
 #endif
 
+#define CM_T35_LCD_EN_GPIO 157
+#define CM_T35_LCD_BL_GPIO 58
+#define CM_T35_DVI_EN_GPIO 54
+
+static int lcd_bl_gpio;
+static int lcd_en_gpio;
+static int dvi_en_gpio;
+
+static int lcd_enabled;
+static int dvi_enabled;
+
+static int cm_t35_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+	if (dvi_enabled) {
+		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+		return -EINVAL;
+	}
+
+	gpio_set_value(lcd_en_gpio, 1);
+	gpio_set_value(lcd_bl_gpio, 1);
+
+	lcd_enabled = 1;
+
+	return 0;
+}
+
+static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+	lcd_enabled = 0;
+
+	gpio_set_value(lcd_bl_gpio, 0);
+	gpio_set_value(lcd_en_gpio, 0);
+}
+
+static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+	if (lcd_enabled) {
+		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+		return -EINVAL;
+	}
+
+	gpio_set_value(dvi_en_gpio, 0);
+	dvi_enabled = 1;
+
+	return 0;
+}
+
+static void cm_t35_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(dvi_en_gpio, 1);
+	dvi_enabled = 0;
+}
+
+static int cm_t35_panel_enable_tv(struct omap_dss_device *dssdev)
+{
+	return 0;
+}
+
+static void cm_t35_panel_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+static struct omap_dss_device cm_t35_lcd_device = {
+	.name			= "lcd",
+	.driver_name		= "toppoly_tdo35s_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 18,
+	.platform_enable	= cm_t35_panel_enable_lcd,
+	.platform_disable	= cm_t35_panel_disable_lcd,
+};
+
+static struct omap_dss_device cm_t35_dvi_device = {
+	.name			= "dvi",
+	.driver_name		= "generic_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 24,
+	.platform_enable	= cm_t35_panel_enable_dvi,
+	.platform_disable	= cm_t35_panel_disable_dvi,
+};
+
+static struct omap_dss_device cm_t35_tv_device = {
+	.name			= "tv",
+	.driver_name		= "venc",
+	.type			= OMAP_DISPLAY_TYPE_VENC,
+	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+	.platform_enable	= cm_t35_panel_enable_tv,
+	.platform_disable	= cm_t35_panel_disable_tv,
+};
+
+static struct omap_dss_device *cm_t35_dss_devices[] = {
+	&cm_t35_lcd_device,
+	&cm_t35_dvi_device,
+	&cm_t35_tv_device,
+};
+
+static struct omap_dss_board_info cm_t35_dss_data = {
+	.num_devices	= ARRAY_SIZE(cm_t35_dss_devices),
+	.devices	= cm_t35_dss_devices,
+	.default_device	= &cm_t35_dvi_device,
+};
+
+static struct platform_device cm_t35_dss_device = {
+	.name		= "omapdss",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &cm_t35_dss_data,
+	},
+};
+
+static struct omap2_mcspi_device_config tdo24m_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+static struct tdo24m_platform_data tdo24m_config = {
+	.model = TDO35S,
+};
+
+static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = {
+	{
+		.modalias		= "tdo24m",
+		.bus_num		= 4,
+		.chip_select		= 0,
+		.max_speed_hz		= 1000000,
+		.controller_data	= &tdo24m_mcspi_config,
+		.platform_data		= &tdo24m_config,
+	},
+};
+
+static void __init cm_t35_init_display(void)
+{
+	int err;
+
+	lcd_en_gpio = CM_T35_LCD_EN_GPIO;
+	lcd_bl_gpio = CM_T35_LCD_BL_GPIO;
+	dvi_en_gpio = CM_T35_DVI_EN_GPIO;
+
+	spi_register_board_info(cm_t35_lcd_spi_board_info,
+				ARRAY_SIZE(cm_t35_lcd_spi_board_info));
+
+	err = gpio_request(lcd_en_gpio, "LCD RST");
+	if (err) {
+		pr_err("CM-T35: failed to get LCD reset GPIO\n");
+		goto out;
+	}
+
+	err = gpio_request(lcd_bl_gpio, "LCD BL");
+	if (err) {
+		pr_err("CM-T35: failed to get LCD backlight control GPIO\n");
+		goto err_lcd_bl;
+	}
+
+	err = gpio_request(dvi_en_gpio, "DVI EN");
+	if (err) {
+		pr_err("CM-T35: failed to get DVI reset GPIO\n");
+		goto err_dvi_en;
+	}
+
+	gpio_export(lcd_en_gpio, 0);
+	gpio_export(lcd_bl_gpio, 0);
+	gpio_export(dvi_en_gpio, 0);
+	gpio_direction_output(lcd_en_gpio, 0);
+	gpio_direction_output(lcd_bl_gpio, 0);
+	gpio_direction_output(dvi_en_gpio, 1);
+
+	msleep(50);
+	gpio_set_value(lcd_en_gpio, 1);
+
+	err = platform_device_register(&cm_t35_dss_device);
+	if (err) {
+		pr_err("CM-T35: failed to register DSS device\n");
+		goto err_dev_reg;
+	}
+
+	return;
+
+err_dev_reg:
+	gpio_free(dvi_en_gpio);
+err_dvi_en:
+	gpio_free(lcd_bl_gpio);
+err_lcd_bl:
+	gpio_free(lcd_en_gpio);
+out:
+
+	return;
+}
+
 static struct regulator_consumer_supply cm_t35_vmmc1_supply = {
 	.supply			= "vmmc",
 };
@@ -312,6 +502,16 @@ static struct regulator_consumer_supply cm_t35_vsim_supply = {
 	.supply			= "vmmc_aux",
 };
 
+static struct regulator_consumer_supply cm_t35_vdac_supply = {
+	.supply		= "vdda_dac",
+	.dev		= &cm_t35_dss_device.dev,
+};
+
+static struct regulator_consumer_supply cm_t35_vdvi_supply = {
+	.supply		= "vdvi",
+	.dev		= &cm_t35_dss_device.dev,
+};
+
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 static struct regulator_init_data cm_t35_vmmc1 = {
 	.constraints = {
@@ -342,6 +542,35 @@ static struct regulator_init_data cm_t35_vsim = {
 	.consumer_supplies	= &cm_t35_vsim_supply,
 };
 
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data cm_t35_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &cm_t35_vdac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data cm_t35_vpll2 = {
+	.constraints = {
+		.name			= "VDVI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &cm_t35_vdvi_supply,
+};
+
 static struct twl4030_usb_data cm_t35_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
@@ -364,7 +593,7 @@ static struct twl4030_keypad_data cm_t35_kp_data = {
 	.rep		= 1,
 };
 
-static struct twl4030_hsmmc_info mmc[] = {
+static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
 		.wires		= 4,
@@ -413,7 +642,7 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
 
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
-	twl4030_mmc_init(mmc);
+	omap2_hsmmc_init(mmc);
 
 	/* link regulators to MMC adapters */
 	cm_t35_vmmc1_supply.dev = mmc[0].dev;
@@ -445,6 +674,8 @@ static struct twl4030_platform_data cm_t35_twldata = {
 	.gpio		= &cm_t35_gpio_data,
 	.vmmc1		= &cm_t35_vmmc1,
 	.vsim		= &cm_t35_vsim,
+	.vdac		= &cm_t35_vdac,
+	.vpll2		= &cm_t35_vpll2,
 };
 
 static struct i2c_board_info __initdata cm_t35_i2c_boardinfo[] = {
@@ -479,7 +710,7 @@ static void __init cm_t35_init_irq(void)
 static void __init cm_t35_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 static struct omap_board_mux board_mux[] __initdata = {
@@ -568,6 +799,11 @@ static struct omap_board_mux board_mux[] __initdata = {
 	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
 	OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
 
+	/* display controls */
+	OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+
 	/* TPS IRQ */
 	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \
 		  OMAP_PIN_INPUT_PULLUP),
@@ -575,6 +811,12 @@ static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init cm_t35_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
@@ -584,8 +826,9 @@ static void __init cm_t35_init(void)
 	cm_t35_init_ads7846();
 	cm_t35_init_ethernet();
 	cm_t35_init_led();
+	cm_t35_init_display();
 
-	usb_musb_init();
+	usb_musb_init(&musb_board_data);
 }
 
 MACHINE_START(CM_T35, "Compulab CM-T35")

arch/arm/mach-omap2/board-devkit8000.c

@@ -0,0 +1,697 @@
+/*
+ * board-devkit8000.c - TimLL Devkit8000
+ *
+ * Copyright (C) 2009 Kim Botherway
+ * Copyright (C) 2010 Thomas Weber
+ *
+ * Modified from mach-omap2/board-omap3beagle.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
+#include <linux/regulator/machine.h>
+#include <linux/i2c/twl.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/nand.h>
+#include <plat/usb.h>
+#include <plat/timer-gp.h>
+#include <plat/display.h>
+
+#include <plat/mcspi.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/usb/otg.h>
+#include <linux/dm9000.h>
+#include <linux/interrupt.h>
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+
+#include "mux.h"
+#include "hsmmc.h"
+
+#define GPMC_CS0_BASE  0x60
+#define GPMC_CS_SIZE   0x30
+
+#define NAND_BLOCK_SIZE		SZ_128K
+
+#define OMAP_DM9000_GPIO_IRQ	25
+#define OMAP3_DEVKIT_TS_GPIO	27
+
+static struct mtd_partition devkit8000_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader",
+		.offset		= 0,
+		.size		= 4 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 15 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot Env",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
+		.size		= 1 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.size		= 32 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name		= "File System",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_nand_platform_data devkit8000_nand_data = {
+	.options	= NAND_BUSWIDTH_16,
+	.parts		= devkit8000_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(devkit8000_nand_partitions),
+	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
+};
+
+static struct resource devkit8000_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device devkit8000_nand_device = {
+	.name		= "omap2-nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &devkit8000_nand_data,
+	},
+	.num_resources	= 1,
+	.resource	= &devkit8000_nand_resource,
+};
+
+static struct omap2_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 8,
+		.gpio_wp	= 29,
+	},
+	{}	/* Terminator */
+};
+static struct omap_board_config_kernel devkit8000_config[] __initdata = {
+};
+
+static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+	twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1);
+	twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);
+
+	return 0;
+}
+
+static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+}
+static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+	return 0;
+}
+
+static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+}
+
+static int devkit8000_panel_enable_tv(struct omap_dss_device *dssdev)
+{
+
+	return 0;
+}
+
+static void devkit8000_panel_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+
+static struct regulator_consumer_supply devkit8000_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply devkit8000_vsim_supply = {
+	.supply			= "vmmc_aux",
+};
+
+
+static struct omap_dss_device devkit8000_lcd_device = {
+	.name                   = "lcd",
+	.driver_name            = "innolux_at_panel",
+	.type                   = OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines     = 24,
+	.platform_enable        = devkit8000_panel_enable_lcd,
+	.platform_disable       = devkit8000_panel_disable_lcd,
+};
+static struct omap_dss_device devkit8000_dvi_device = {
+	.name                   = "dvi",
+	.driver_name            = "generic_panel",
+	.type                   = OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines     = 24,
+	.platform_enable        = devkit8000_panel_enable_dvi,
+	.platform_disable       = devkit8000_panel_disable_dvi,
+};
+
+static struct omap_dss_device devkit8000_tv_device = {
+	.name                   = "tv",
+	.driver_name            = "venc",
+	.type                   = OMAP_DISPLAY_TYPE_VENC,
+	.phy.venc.type          = OMAP_DSS_VENC_TYPE_SVIDEO,
+	.platform_enable        = devkit8000_panel_enable_tv,
+	.platform_disable       = devkit8000_panel_disable_tv,
+};
+
+
+static struct omap_dss_device *devkit8000_dss_devices[] = {
+	&devkit8000_lcd_device,
+	&devkit8000_dvi_device,
+	&devkit8000_tv_device,
+};
+
+static struct omap_dss_board_info devkit8000_dss_data = {
+	.num_devices = ARRAY_SIZE(devkit8000_dss_devices),
+	.devices = devkit8000_dss_devices,
+	.default_device = &devkit8000_lcd_device,
+};
+
+static struct platform_device devkit8000_dss_device = {
+	.name		= "omapdss",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &devkit8000_dss_data,
+	},
+};
+
+static struct regulator_consumer_supply devkit8000_vdda_dac_supply = {
+	.supply = "vdda_dac",
+	.dev	= &devkit8000_dss_device.dev,
+};
+
+static int board_keymap[] = {
+	KEY(0, 0, KEY_1),
+	KEY(1, 0, KEY_2),
+	KEY(2, 0, KEY_3),
+	KEY(0, 1, KEY_4),
+	KEY(1, 1, KEY_5),
+	KEY(2, 1, KEY_6),
+	KEY(3, 1, KEY_F5),
+	KEY(0, 2, KEY_7),
+	KEY(1, 2, KEY_8),
+	KEY(2, 2, KEY_9),
+	KEY(3, 2, KEY_F6),
+	KEY(0, 3, KEY_F7),
+	KEY(1, 3, KEY_0),
+	KEY(2, 3, KEY_F8),
+	PERSISTENT_KEY(4, 5),
+	KEY(4, 4, KEY_VOLUMEUP),
+	KEY(5, 5, KEY_VOLUMEDOWN),
+	0
+};
+
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
+static struct twl4030_keypad_data devkit8000_kp_data = {
+	.keymap_data	= &board_map_data,
+	.rows		= 6,
+	.cols		= 6,
+	.rep		= 1,
+};
+
+static struct gpio_led gpio_leds[];
+
+static int devkit8000_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	omap_mux_init_gpio(29, OMAP_PIN_INPUT);
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	mmc[0].gpio_cd = gpio + 0;
+	omap2_hsmmc_init(mmc);
+
+	/* link regulators to MMC adapters */
+	devkit8000_vmmc1_supply.dev = mmc[0].dev;
+	devkit8000_vsim_supply.dev = mmc[0].dev;
+
+	/* REVISIT: need ehci-omap hooks for external VBUS
+	 * power switch and overcurrent detect
+	 */
+
+	gpio_request(gpio + 1, "EHCI_nOC");
+	gpio_direction_input(gpio + 1);
+
+	/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
+	gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
+	gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
+
+	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
+	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+	return 0;
+}
+
+static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.use_leds	= true,
+	.pullups	= BIT(1),
+	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
+				| BIT(15) | BIT(16) | BIT(17),
+	.setup		= devkit8000_twl_gpio_setup,
+};
+
+static struct regulator_consumer_supply devkit8000_vpll2_supplies[] = {
+	{
+	.supply		= "vdvi",
+	.dev		= &devkit8000_lcd_device.dev,
+	},
+	{
+	.supply		= "vdss_dsi",
+	.dev		= &devkit8000_dss_device.dev,
+	}
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data devkit8000_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &devkit8000_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data devkit8000_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &devkit8000_vsim_supply,
+};
+
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data devkit8000_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &devkit8000_vdda_dac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data devkit8000_vpll2 = {
+	.constraints = {
+		.name			= "VDVI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(devkit8000_vpll2_supplies),
+	.consumer_supplies	= devkit8000_vpll2_supplies,
+};
+
+static struct twl4030_usb_data devkit8000_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static struct twl4030_codec_audio_data devkit8000_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data devkit8000_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &devkit8000_audio_data,
+};
+
+static struct twl4030_platform_data devkit8000_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.usb		= &devkit8000_usb_data,
+	.gpio		= &devkit8000_gpio_data,
+	.codec		= &devkit8000_codec_data,
+	.vmmc1		= &devkit8000_vmmc1,
+	.vsim		= &devkit8000_vsim,
+	.vdac		= &devkit8000_vdac,
+	.vpll2		= &devkit8000_vpll2,
+	.keypad		= &devkit8000_kp_data,
+};
+
+static struct i2c_board_info __initdata devkit8000_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = INT_34XX_SYS_NIRQ,
+		.platform_data = &devkit8000_twldata,
+	},
+};
+
+static int __init devkit8000_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, devkit8000_i2c_boardinfo,
+			ARRAY_SIZE(devkit8000_i2c_boardinfo));
+	/* Bus 3 is attached to the DVI port where devices like the pico DLP
+	 * projector don't work reliably with 400kHz */
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.gpio			= 186,
+		.active_low		= true,
+	},
+	{
+		.name			= "led2",
+		.default_trigger	= "mmc0",
+		.gpio			= 163,
+		.active_low		= true,
+	},
+	{
+		.name			= "ledB",
+		.default_trigger	= "none",
+		.gpio			= 153,
+		.active_low             = true,
+	},
+	{
+		.name			= "led3",
+		.default_trigger	= "none",
+		.gpio			= 164,
+		.active_low             = true,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static struct gpio_keys_button gpio_buttons[] = {
+	{
+		.code			= BTN_EXTRA,
+		.gpio			= 26,
+		.desc			= "user",
+		.wakeup			= 1,
+	},
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+	.buttons	= gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device keys_gpio = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_key_info,
+	},
+};
+
+
+static void __init devkit8000_init_irq(void)
+{
+	omap_board_config = devkit8000_config;
+	omap_board_config_size = ARRAY_SIZE(devkit8000_config);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+#ifdef CONFIG_OMAP_32K_TIMER
+	omap2_gp_clockevent_set_gptimer(12);
+#endif
+	omap_gpio_init();
+}
+
+static void __init devkit8000_ads7846_init(void)
+{
+	int gpio = OMAP3_DEVKIT_TS_GPIO;
+	int ret;
+
+	ret = gpio_request(gpio, "ads7846_pen_down");
+	if (ret < 0) {
+		printk(KERN_ERR "Failed to request GPIO %d for "
+				"ads7846 pen down IRQ\n", gpio);
+		return;
+	}
+
+	gpio_direction_input(gpio);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(OMAP3_DEVKIT_TS_GPIO);
+}
+
+static struct ads7846_platform_data ads7846_config = {
+	.x_max                  = 0x0fff,
+	.y_max                  = 0x0fff,
+	.x_plate_ohms           = 180,
+	.pressure_max           = 255,
+	.debounce_max           = 10,
+	.debounce_tol           = 5,
+	.debounce_rep           = 1,
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+	.settle_delay_usecs     = 150,
+};
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+static struct spi_board_info devkit8000_spi_board_info[] __initdata = {
+	{
+		.modalias		= "ads7846",
+		.bus_num		= 2,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &ads7846_mcspi_config,
+		.irq			= OMAP_GPIO_IRQ(OMAP3_DEVKIT_TS_GPIO),
+		.platform_data		= &ads7846_config,
+	}
+};
+
+#define OMAP_DM9000_BASE	0x2c000000
+
+static struct resource omap_dm9000_resources[] = {
+	[0] = {
+		.start		= OMAP_DM9000_BASE,
+		.end		= (OMAP_DM9000_BASE + 0x4 - 1),
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= (OMAP_DM9000_BASE + 0x400),
+		.end		= (OMAP_DM9000_BASE + 0x400 + 0x4 - 1),
+		.flags		= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start		= OMAP_GPIO_IRQ(OMAP_DM9000_GPIO_IRQ),
+		.flags		= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct dm9000_plat_data omap_dm9000_platdata = {
+	.flags = DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device omap_dm9000_dev = {
+	.name = "dm9000",
+	.id = -1,
+	.num_resources	= ARRAY_SIZE(omap_dm9000_resources),
+	.resource	= omap_dm9000_resources,
+	.dev = {
+		.platform_data = &omap_dm9000_platdata,
+	},
+};
+
+static void __init omap_dm9000_init(void)
+{
+	if (gpio_request(OMAP_DM9000_GPIO_IRQ, "dm9000 irq") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n",
+			OMAP_DM9000_GPIO_IRQ);
+		return;
+		}
+
+	gpio_direction_input(OMAP_DM9000_GPIO_IRQ);
+}
+
+static struct platform_device *devkit8000_devices[] __initdata = {
+	&devkit8000_dss_device,
+	&leds_gpio,
+	&keys_gpio,
+	&omap_dm9000_dev,
+};
+
+static void __init devkit8000_flash_init(void)
+{
+	u8 cs = 0;
+	u8 nandcs = GPMC_CS_NUM + 1;
+
+	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
+
+	/* find out the chip-select on which NAND exists */
+	while (cs < GPMC_CS_NUM) {
+		u32 ret = 0;
+		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+		if ((ret & 0xC00) == 0x800) {
+			printk(KERN_INFO "Found NAND on CS%d\n", cs);
+			if (nandcs > GPMC_CS_NUM)
+				nandcs = cs;
+		}
+		cs++;
+	}
+
+	if (nandcs > GPMC_CS_NUM) {
+		printk(KERN_INFO "NAND: Unable to find configuration "
+				 "in GPMC\n ");
+		return;
+	}
+
+	if (nandcs < GPMC_CS_NUM) {
+		devkit8000_nand_data.cs = nandcs;
+		devkit8000_nand_data.gpmc_cs_baseaddr = (void *)
+			(gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
+		devkit8000_nand_data.gpmc_baseaddr = (void *)
+			(gpmc_base_add);
+
+		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
+		if (platform_device_register(&devkit8000_nand_device) < 0)
+			printk(KERN_ERR "Unable to register NAND device\n");
+	}
+}
+
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = 147,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+static void __init devkit8000_init(void)
+{
+	devkit8000_i2c_init();
+	platform_add_devices(devkit8000_devices,
+			ARRAY_SIZE(devkit8000_devices));
+	omap_board_config = devkit8000_config;
+	omap_board_config_size = ARRAY_SIZE(devkit8000_config);
+
+	spi_register_board_info(devkit8000_spi_board_info,
+	ARRAY_SIZE(devkit8000_spi_board_info));
+
+	omap_serial_init();
+
+	omap_dm9000_init();
+
+	devkit8000_ads7846_init();
+
+	omap_mux_init_gpio(170, OMAP_PIN_INPUT);
+
+	gpio_request(170, "DVI_nPD");
+	/* REVISIT leave DVI powered down until it's needed ... */
+	gpio_direction_output(170, true);
+
+	usb_musb_init(&musb_board_data);
+	usb_ehci_init(&ehci_pdata);
+	devkit8000_flash_init();
+
+	/* Ensure SDRC pins are mux'd for self-refresh */
+	omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT);
+}
+
+static void __init devkit8000_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap34xx_map_common_io();
+}
+
+MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= devkit8000_map_io,
+	.init_irq	= devkit8000_init_irq,
+	.init_machine	= devkit8000_init,
+	.timer		= &omap_timer,
+MACHINE_END

arch/arm/mach-omap2/board-generic.c

@@ -50,7 +50,7 @@ static void __init omap_generic_init(void)
 static void __init omap_generic_map_io(void)
 {
 	omap2_set_globals_242x(); /* should be 242x, 243x, or 343x */
-	omap2_map_common_io();
+	omap242x_map_common_io();
 }
 
 MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")

arch/arm/mach-omap2/board-h4.c

@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/delay.h>
 #include <linux/workqueue.h>
 #include <linux/i2c.h>
@@ -29,7 +30,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
 #include <plat/control.h>
 #include <mach/gpio.h>
@@ -115,8 +115,7 @@ static struct mtd_partition h4_partitions[] = {
 	}
 };
 
-static struct flash_platform_data h4_flash_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data h4_flash_data = {
 	.width		= 2,
 	.parts		= h4_partitions,
 	.nr_parts	= ARRAY_SIZE(h4_partitions),
@@ -127,7 +126,7 @@ static struct resource h4_flash_resource = {
 };
 
 static struct platform_device h4_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &h4_flash_data,
@@ -370,7 +369,7 @@ static void __init omap_h4_init(void)
 static void __init omap_h4_map_io(void)
 {
 	omap2_set_globals_242x();
-	omap2_map_common_io();
+	omap242x_map_common_io();
 }
 
 MACHINE_START(OMAP_H4, "OMAP2420 H4 board")

arch/arm/mach-omap2/board-igep0020.c

@@ -16,6 +16,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/leds.h>
 #include <linux/interrupt.h>
 
 #include <linux/regulator/machine.h>
@@ -28,9 +29,12 @@
 #include <plat/common.h>
 #include <plat/gpmc.h>
 #include <plat/usb.h>
+#include <plat/display.h>
+#include <plat/onenand.h>
 
 #include "mux.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
+#include "sdram-numonyx-m65kxxxxam.h"
 
 #define IGEP2_SMSC911X_CS       5
 #define IGEP2_SMSC911X_GPIO     176
@@ -38,6 +42,108 @@
 #define IGEP2_GPIO_LED0_RED 	26
 #define IGEP2_GPIO_LED0_GREEN 	27
 #define IGEP2_GPIO_LED1_RED   	28
+#define IGEP2_GPIO_DVI_PUP	170
+#define IGEP2_GPIO_WIFI_NPD 	94
+#define IGEP2_GPIO_WIFI_NRESET 	95
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+#define ONENAND_MAP             0x20000000
+
+/* NAND04GR4E1A ( x2 Flash built-in COMBO POP MEMORY )
+ * Since the device is equipped with two DataRAMs, and two-plane NAND
+ * Flash memory array, these two component enables simultaneous program
+ * of 4KiB. Plane1 has only even blocks such as block0, block2, block4
+ * while Plane2 has only odd blocks such as block1, block3, block5.
+ * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048)
+ */
+
+static struct mtd_partition igep2_onenand_partitions[] = {
+	{
+		.name           = "X-Loader",
+		.offset         = 0,
+		.size           = 2 * (64*(2*2048))
+	},
+	{
+		.name           = "U-Boot",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 6 * (64*(2*2048)),
+	},
+	{
+		.name           = "Environment",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 2 * (64*(2*2048)),
+	},
+	{
+		.name           = "Kernel",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 12 * (64*(2*2048)),
+	},
+	{
+		.name           = "File System",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static int igep2_onenand_setup(void __iomem *onenand_base, int freq)
+{
+       /* nothing is required to be setup for onenand as of now */
+       return 0;
+}
+
+static struct omap_onenand_platform_data igep2_onenand_data = {
+	.parts = igep2_onenand_partitions,
+	.nr_parts = ARRAY_SIZE(igep2_onenand_partitions),
+	.onenand_setup = igep2_onenand_setup,
+	.dma_channel	= -1,	/* disable DMA in OMAP OneNAND driver */
+};
+
+static struct platform_device igep2_onenand_device = {
+	.name		= "omap2-onenand",
+	.id		= -1,
+	.dev = {
+		.platform_data = &igep2_onenand_data,
+	},
+};
+
+void __init igep2_flash_init(void)
+{
+	u8		cs = 0;
+	u8		onenandcs = GPMC_CS_NUM + 1;
+
+	while (cs < GPMC_CS_NUM) {
+		u32 ret = 0;
+		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+		/* Check if NAND/oneNAND is configured */
+		if ((ret & 0xC00) == 0x800)
+			/* NAND found */
+			pr_err("IGEP v2: Unsupported NAND found\n");
+		else {
+			ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
+			if ((ret & 0x3F) == (ONENAND_MAP >> 24))
+				/* ONENAND found */
+				onenandcs = cs;
+		}
+		cs++;
+	}
+	if (onenandcs > GPMC_CS_NUM) {
+		pr_err("IGEP v2: Unable to find configuration in GPMC\n");
+		return;
+	}
+
+	if (onenandcs < GPMC_CS_NUM) {
+		igep2_onenand_data.cs = onenandcs;
+		if (platform_device_register(&igep2_onenand_device) < 0)
+			pr_err("IGEP v2: Unable to register OneNAND device\n");
+	}
+}
+
+#else
+void __init igep2_flash_init(void) {}
+#endif
 
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 
@@ -106,6 +212,10 @@ static struct regulator_consumer_supply igep2_vmmc1_supply = {
 	.supply		= "vmmc",
 };
 
+static struct regulator_consumer_supply igep2_vmmc2_supply = {
+	.supply		= "vmmc",
+};
+
 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
 static struct regulator_init_data igep2_vmmc1 = {
 	.constraints = {
@@ -121,7 +231,22 @@ static struct regulator_init_data igep2_vmmc1 = {
 	.consumer_supplies      = &igep2_vmmc1_supply,
 };
 
-static struct twl4030_hsmmc_info mmc[] = {
+/* VMMC2 for OMAP VDD_MMC2 (i/o) and MMC2 WIFI */
+static struct regulator_init_data igep2_vmmc2 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &igep2_vmmc2_supply,
+};
+
+static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
 		.wires		= 4,
@@ -142,12 +267,13 @@ static int igep2_twl_gpio_setup(struct device *dev,
 {
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
-	twl4030_mmc_init(mmc);
+	omap2_hsmmc_init(mmc);
 
 	/* link regulators to MMC adapters ... we "know" the
 	 * regulators will be set up only *after* we return.
 	*/
 	igep2_vmmc1_supply.dev = mmc[0].dev;
+	igep2_vmmc2_supply.dev = mmc[1].dev;
 
 	return 0;
 };
@@ -164,23 +290,130 @@ static struct twl4030_usb_data igep2_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
+static int igep2_enable_dvi(struct omap_dss_device *dssdev)
+{
+	gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1);
+
+	return 0;
+}
+
+static void igep2_disable_dvi(struct omap_dss_device *dssdev)
+{
+	gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0);
+}
+
+static struct omap_dss_device igep2_dvi_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "dvi",
+	.driver_name		= "generic_panel",
+	.phy.dpi.data_lines	= 24,
+	.platform_enable	= igep2_enable_dvi,
+	.platform_disable	= igep2_disable_dvi,
+};
+
+static struct omap_dss_device *igep2_dss_devices[] = {
+	&igep2_dvi_device
+};
+
+static struct omap_dss_board_info igep2_dss_data = {
+	.num_devices	= ARRAY_SIZE(igep2_dss_devices),
+	.devices	= igep2_dss_devices,
+	.default_device	= &igep2_dvi_device,
+};
+
+static struct platform_device igep2_dss_device = {
+	.name	= "omapdss",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &igep2_dss_data,
+	},
+};
+
+static struct regulator_consumer_supply igep2_vpll2_supply = {
+	.supply	= "vdds_dsi",
+	.dev	= &igep2_dss_device.dev,
+};
+
+static struct regulator_init_data igep2_vpll2 = {
+	.constraints = {
+		.name			= "VDVI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &igep2_vpll2_supply,
+};
+
+static void __init igep2_display_init(void)
+{
+	if (gpio_request(IGEP2_GPIO_DVI_PUP, "GPIO_DVI_PUP") &&
+	    gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1))
+		pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n");
+}
+#ifdef CONFIG_LEDS_TRIGGERS
+static struct gpio_led gpio_leds[] = {
+	{
+		.name = "GPIO_LED1_RED",
+		.default_trigger = "heartbeat",
+		.gpio = IGEP2_GPIO_LED1_RED,
+	},
+};
+
+static struct gpio_led_platform_data gpio_leds_info = {
+	.leds           = gpio_leds,
+	.num_leds       = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	 .name   = "leds-gpio",
+	 .id     = -1,
+	 .dev    = {
+		 .platform_data  =  &gpio_leds_info,
+	},
+};
+#endif
+
+static struct platform_device *igep2_devices[] __initdata = {
+	&igep2_dss_device,
+#ifdef CONFIG_LEDS_TRIGGERS
+	&leds_gpio,
+#endif
+};
+
 static void __init igep2_init_irq(void)
 {
 	omap_board_config = igep2_config;
 	omap_board_config_size = ARRAY_SIZE(igep2_config);
-	omap2_init_common_hw(NULL, NULL);
+	omap2_init_common_hw(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
 
+static struct twl4030_codec_audio_data igep2_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data igep2_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &igep2_audio_data,
+};
+
 static struct twl4030_platform_data igep2_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 
 	/* platform_data for children goes here */
 	.usb		= &igep2_usb_data,
+	.codec		= &igep2_codec_data,
 	.gpio		= &igep2_gpio_data,
 	.vmmc1          = &igep2_vmmc1,
+	.vmmc2		= &igep2_vmmc2,
+	.vpll2		= &igep2_vpll2,
 
 };
 
@@ -203,6 +436,23 @@ static int __init igep2_i2c_init(void)
 	return 0;
 }
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset = true,
+	.reset_gpio_port[0] = -EINVAL,
+	.reset_gpio_port[1] = IGEP2_GPIO_USBH_NRESET,
+	.reset_gpio_port[2] = -EINVAL,
+};
+
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -215,9 +465,13 @@ static void __init igep2_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	igep2_i2c_init();
+	platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices));
 	omap_serial_init();
-	usb_musb_init();
+	usb_musb_init(&musb_board_data);
+	usb_ehci_init(&ehci_pdata);
 
+	igep2_flash_init();
+	igep2_display_init();
 	igep2_init_smsc911x();
 
 	/* GPIO userspace leds */
@@ -234,19 +488,36 @@ static void __init igep2_init(void)
 		gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0);
 	} else
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n");
-
+#ifndef CONFIG_LEDS_TRIGGERS
 	if ((gpio_request(IGEP2_GPIO_LED1_RED, "GPIO_LED1_RED") == 0) &&
 	    (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) {
 		gpio_export(IGEP2_GPIO_LED1_RED, 0);
 		gpio_set_value(IGEP2_GPIO_LED1_RED, 0);
 	} else
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n");
+#endif
+	/* GPIO W-LAN + Bluetooth combo module */
+	if ((gpio_request(IGEP2_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) &&
+	    (gpio_direction_output(IGEP2_GPIO_WIFI_NPD, 1) == 0)) {
+		gpio_export(IGEP2_GPIO_WIFI_NPD, 0);
+/* 		gpio_set_value(IGEP2_GPIO_WIFI_NPD, 0); */
+	} else
+		pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NPD\n");
+
+	if ((gpio_request(IGEP2_GPIO_WIFI_NRESET, "GPIO_WIFI_NRESET") == 0) &&
+	    (gpio_direction_output(IGEP2_GPIO_WIFI_NRESET, 1) == 0)) {
+		gpio_export(IGEP2_GPIO_WIFI_NRESET, 0);
+		gpio_set_value(IGEP2_GPIO_WIFI_NRESET, 0);
+		udelay(10);
+		gpio_set_value(IGEP2_GPIO_WIFI_NRESET, 1);
+	} else
+		pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NRESET\n");
 }
 
 static void __init igep2_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 MACHINE_START(IGEP0020, "IGEP v2 board")

arch/arm/mach-omap2/board-ldp.c

@@ -44,7 +44,7 @@
 #include <plat/usb.h>
 
 #include "mux.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
 
 #define LDP_SMSC911X_CS		1
 #define LDP_SMSC911X_GPIO	152
@@ -359,7 +359,7 @@ static int __init omap_i2c_init(void)
 	return 0;
 }
 
-static struct twl4030_hsmmc_info mmc[] __initdata = {
+static struct omap2_hsmmc_info mmc[] __initdata = {
 	{
 		.mmc		= 1,
 		.wires		= 4,
@@ -383,6 +383,12 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init omap_ldp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -394,9 +400,9 @@ static void __init omap_ldp_init(void)
 				ARRAY_SIZE(ldp_spi_board_info));
 	ads7846_dev_init();
 	omap_serial_init();
-	usb_musb_init();
+	usb_musb_init(&musb_board_data);
 
-	twl4030_mmc_init(mmc);
+	omap2_hsmmc_init(mmc);
 	/* link regulators to MMC adapters */
 	ldp_vmmc1_supply.dev = mmc[0].dev;
 }
@@ -404,7 +410,7 @@ static void __init omap_ldp_init(void)
 static void __init omap_ldp_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 MACHINE_START(OMAP_LDP, "OMAP LDP board")

arch/arm/mach-omap2/board-n8x0.c

@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/stddef.h>
+#include <linux/i2c.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/musb.h>
 
@@ -25,11 +26,17 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
+#include <plat/menelaus.h>
 #include <mach/irqs.h>
 #include <plat/mcspi.h>
 #include <plat/onenand.h>
+#include <plat/mmc.h>
 #include <plat/serial.h>
 
+static int slot1_cover_open;
+static int slot2_cover_open;
+static struct device *mmc_device;
+
 static struct omap2_mcspi_device_config p54spi_mcspi_config = {
 	.turbo_mode	= 0,
 	.single_channel = 1,
@@ -96,10 +103,446 @@ static void __init n8x0_onenand_init(void) {}
 
 #endif
 
+#if defined(CONFIG_MENELAUS) &&						\
+	(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE))
+
+/*
+ * On both N800 and N810, only the first of the two MMC controllers is in use.
+ * The two MMC slots are multiplexed via Menelaus companion chip over I2C.
+ * On N800, both slots are powered via Menelaus. On N810, only one of the
+ * slots is powered via Menelaus. The N810 EMMC is powered via GPIO.
+ *
+ * VMMC				slot 1 on both N800 and N810
+ * VDCDC3_APE and VMCS2_APE	slot 2 on N800
+ * GPIO23 and GPIO9		slot 2 EMMC on N810
+ *
+ */
+#define N8X0_SLOT_SWITCH_GPIO	96
+#define N810_EMMC_VSD_GPIO	23
+#define NN810_EMMC_VIO_GPIO	9
+
+static int n8x0_mmc_switch_slot(struct device *dev, int slot)
+{
+#ifdef CONFIG_MMC_DEBUG
+	dev_dbg(dev, "Choose slot %d\n", slot + 1);
+#endif
+	gpio_set_value(N8X0_SLOT_SWITCH_GPIO, slot);
+	return 0;
+}
+
+static int n8x0_mmc_set_power_menelaus(struct device *dev, int slot,
+					int power_on, int vdd)
+{
+	int mV;
+
+#ifdef CONFIG_MMC_DEBUG
+	dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
+		power_on ? "on" : "off", vdd);
+#endif
+	if (slot == 0) {
+		if (!power_on)
+			return menelaus_set_vmmc(0);
+		switch (1 << vdd) {
+		case MMC_VDD_33_34:
+		case MMC_VDD_32_33:
+		case MMC_VDD_31_32:
+			mV = 3100;
+			break;
+		case MMC_VDD_30_31:
+			mV = 3000;
+			break;
+		case MMC_VDD_28_29:
+			mV = 2800;
+			break;
+		case MMC_VDD_165_195:
+			mV = 1850;
+			break;
+		default:
+			BUG();
+		}
+		return menelaus_set_vmmc(mV);
+	} else {
+		if (!power_on)
+			return menelaus_set_vdcdc(3, 0);
+		switch (1 << vdd) {
+		case MMC_VDD_33_34:
+		case MMC_VDD_32_33:
+			mV = 3300;
+			break;
+		case MMC_VDD_30_31:
+		case MMC_VDD_29_30:
+			mV = 3000;
+			break;
+		case MMC_VDD_28_29:
+		case MMC_VDD_27_28:
+			mV = 2800;
+			break;
+		case MMC_VDD_24_25:
+		case MMC_VDD_23_24:
+			mV = 2400;
+			break;
+		case MMC_VDD_22_23:
+		case MMC_VDD_21_22:
+			mV = 2200;
+			break;
+		case MMC_VDD_20_21:
+			mV = 2000;
+			break;
+		case MMC_VDD_165_195:
+			mV = 1800;
+			break;
+		default:
+			BUG();
+		}
+		return menelaus_set_vdcdc(3, mV);
+	}
+	return 0;
+}
+
+static void n810_set_power_emmc(struct device *dev,
+					 int power_on)
+{
+	dev_dbg(dev, "Set EMMC power %s\n", power_on ? "on" : "off");
+
+	if (power_on) {
+		gpio_set_value(N810_EMMC_VSD_GPIO, 1);
+		msleep(1);
+		gpio_set_value(NN810_EMMC_VIO_GPIO, 1);
+		msleep(1);
+	} else {
+		gpio_set_value(NN810_EMMC_VIO_GPIO, 0);
+		msleep(50);
+		gpio_set_value(N810_EMMC_VSD_GPIO, 0);
+		msleep(50);
+	}
+}
+
+static int n8x0_mmc_set_power(struct device *dev, int slot, int power_on,
+			      int vdd)
+{
+	if (machine_is_nokia_n800() || slot == 0)
+		return n8x0_mmc_set_power_menelaus(dev, slot, power_on, vdd);
+
+	n810_set_power_emmc(dev, power_on);
+
+	return 0;
+}
+
+static int n8x0_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
+{
+	int r;
+
+	dev_dbg(dev, "Set slot %d bus mode %s\n", slot + 1,
+		bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
+	BUG_ON(slot != 0 && slot != 1);
+	slot++;
+	switch (bus_mode) {
+	case MMC_BUSMODE_OPENDRAIN:
+		r = menelaus_set_mmc_opendrain(slot, 1);
+		break;
+	case MMC_BUSMODE_PUSHPULL:
+		r = menelaus_set_mmc_opendrain(slot, 0);
+		break;
+	default:
+		BUG();
+	}
+	if (r != 0 && printk_ratelimit())
+		dev_err(dev, "MMC: unable to set bus mode for slot %d\n",
+			slot);
+	return r;
+}
+
+static int n8x0_mmc_get_cover_state(struct device *dev, int slot)
+{
+	slot++;
+	BUG_ON(slot != 1 && slot != 2);
+	if (slot == 1)
+		return slot1_cover_open;
+	else
+		return slot2_cover_open;
+}
+
+static void n8x0_mmc_callback(void *data, u8 card_mask)
+{
+	int bit, *openp, index;
+
+	if (machine_is_nokia_n800()) {
+		bit = 1 << 1;
+		openp = &slot2_cover_open;
+		index = 1;
+	} else {
+		bit = 1;
+		openp = &slot1_cover_open;
+		index = 0;
+	}
+
+	if (card_mask & bit)
+		*openp = 1;
+	else
+		*openp = 0;
+
+	omap_mmc_notify_cover_event(mmc_device, index, *openp);
+}
+
+void n8x0_mmc_slot1_cover_handler(void *arg, int closed_state)
+{
+	if (mmc_device == NULL)
+		return;
+
+	slot1_cover_open = !closed_state;
+	omap_mmc_notify_cover_event(mmc_device, 0, closed_state);
+}
+
+static int n8x0_mmc_late_init(struct device *dev)
+{
+	int r, bit, *openp;
+	int vs2sel;
+
+	mmc_device = dev;
+
+	r = menelaus_set_slot_sel(1);
+	if (r < 0)
+		return r;
+
+	if (machine_is_nokia_n800())
+		vs2sel = 0;
+	else
+		vs2sel = 2;
+
+	r = menelaus_set_mmc_slot(2, 0, vs2sel, 1);
+	if (r < 0)
+		return r;
+
+	n8x0_mmc_set_power(dev, 0, MMC_POWER_ON, 16); /* MMC_VDD_28_29 */
+	n8x0_mmc_set_power(dev, 1, MMC_POWER_ON, 16);
+
+	r = menelaus_set_mmc_slot(1, 1, 0, 1);
+	if (r < 0)
+		return r;
+	r = menelaus_set_mmc_slot(2, 1, vs2sel, 1);
+	if (r < 0)
+		return r;
+
+	r = menelaus_get_slot_pin_states();
+	if (r < 0)
+		return r;
+
+	if (machine_is_nokia_n800()) {
+		bit = 1 << 1;
+		openp = &slot2_cover_open;
+	} else {
+		bit = 1;
+		openp = &slot1_cover_open;
+		slot2_cover_open = 0;
+	}
+
+	/* All slot pin bits seem to be inversed until first switch change */
+	if (r == 0xf || r == (0xf & ~bit))
+		r = ~r;
+
+	if (r & bit)
+		*openp = 1;
+	else
+		*openp = 0;
+
+	r = menelaus_register_mmc_callback(n8x0_mmc_callback, NULL);
+
+	return r;
+}
+
+static void n8x0_mmc_shutdown(struct device *dev)
+{
+	int vs2sel;
+
+	if (machine_is_nokia_n800())
+		vs2sel = 0;
+	else
+		vs2sel = 2;
+
+	menelaus_set_mmc_slot(1, 0, 0, 0);
+	menelaus_set_mmc_slot(2, 0, vs2sel, 0);
+}
+
+static void n8x0_mmc_cleanup(struct device *dev)
+{
+	menelaus_unregister_mmc_callback();
+
+	gpio_free(N8X0_SLOT_SWITCH_GPIO);
+
+	if (machine_is_nokia_n810()) {
+		gpio_free(N810_EMMC_VSD_GPIO);
+		gpio_free(NN810_EMMC_VIO_GPIO);
+	}
+}
+
+/*
+ * MMC controller1 has two slots that are multiplexed via I2C.
+ * MMC controller2 is not in use.
+ */
+static struct omap_mmc_platform_data mmc1_data = {
+	.nr_slots			= 2,
+	.switch_slot			= n8x0_mmc_switch_slot,
+	.init				= n8x0_mmc_late_init,
+	.cleanup			= n8x0_mmc_cleanup,
+	.shutdown			= n8x0_mmc_shutdown,
+	.max_freq			= 24000000,
+	.dma_mask			= 0xffffffff,
+	.slots[0] = {
+		.wires			= 4,
+		.set_power		= n8x0_mmc_set_power,
+		.set_bus_mode		= n8x0_mmc_set_bus_mode,
+		.get_cover_state	= n8x0_mmc_get_cover_state,
+		.ocr_mask		= MMC_VDD_165_195 | MMC_VDD_30_31 |
+						MMC_VDD_32_33   | MMC_VDD_33_34,
+		.name			= "internal",
+	},
+	.slots[1] = {
+		.set_power		= n8x0_mmc_set_power,
+		.set_bus_mode		= n8x0_mmc_set_bus_mode,
+		.get_cover_state	= n8x0_mmc_get_cover_state,
+		.ocr_mask		= MMC_VDD_165_195 | MMC_VDD_20_21 |
+						MMC_VDD_21_22 | MMC_VDD_22_23 |
+						MMC_VDD_23_24 | MMC_VDD_24_25 |
+						MMC_VDD_27_28 | MMC_VDD_28_29 |
+						MMC_VDD_29_30 | MMC_VDD_30_31 |
+						MMC_VDD_32_33 | MMC_VDD_33_34,
+		.name			= "external",
+	},
+};
+
+static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC];
+
+void __init n8x0_mmc_init(void)
+
+{
+	int err;
+
+	if (machine_is_nokia_n810()) {
+		mmc1_data.slots[0].name = "external";
+
+		/*
+		 * Some Samsung Movinand chips do not like open-ended
+		 * multi-block reads and fall to braind-dead state
+		 * while doing so. Reducing the number of blocks in
+		 * the transfer or delays in clock disable do not help
+		 */
+		mmc1_data.slots[1].name = "internal";
+		mmc1_data.slots[1].ban_openended = 1;
+	}
+
+	err = gpio_request(N8X0_SLOT_SWITCH_GPIO, "MMC slot switch");
+	if (err)
+		return err;
+
+	gpio_direction_output(N8X0_SLOT_SWITCH_GPIO, 0);
+
+	if (machine_is_nokia_n810()) {
+		err = gpio_request(N810_EMMC_VSD_GPIO, "MMC slot 2 Vddf");
+		if (err) {
+			gpio_free(N8X0_SLOT_SWITCH_GPIO);
+			return err;
+		}
+		gpio_direction_output(N810_EMMC_VSD_GPIO, 0);
+
+		err = gpio_request(NN810_EMMC_VIO_GPIO, "MMC slot 2 Vdd");
+		if (err) {
+			gpio_free(N8X0_SLOT_SWITCH_GPIO);
+			gpio_free(N810_EMMC_VSD_GPIO);
+			return err;
+		}
+		gpio_direction_output(NN810_EMMC_VIO_GPIO, 0);
+	}
+
+	mmc_data[0] = &mmc1_data;
+	omap2_init_mmc(mmc_data, OMAP24XX_NR_MMC);
+}
+#else
+
+void __init n8x0_mmc_init(void)
+{
+}
+
+void n8x0_mmc_slot1_cover_handler(void *arg, int state)
+{
+}
+
+#endif	/* CONFIG_MMC_OMAP */
+
+#ifdef CONFIG_MENELAUS
+
+static int n8x0_auto_sleep_regulators(void)
+{
+	u32 val;
+	int ret;
+
+	val = EN_VPLL_SLEEP | EN_VMMC_SLEEP    \
+		| EN_VAUX_SLEEP | EN_VIO_SLEEP \
+		| EN_VMEM_SLEEP | EN_DC3_SLEEP \
+		| EN_VC_SLEEP | EN_DC2_SLEEP;
+
+	ret = menelaus_set_regulator_sleep(1, val);
+	if (ret < 0) {
+		printk(KERN_ERR "Could not set regulators to sleep on "
+			"menelaus: %u\n", ret);
+		return ret;
+	}
+	return 0;
+}
+
+static int n8x0_auto_voltage_scale(void)
+{
+	int ret;
+
+	ret = menelaus_set_vcore_hw(1400, 1050);
+	if (ret < 0) {
+		printk(KERN_ERR "Could not set VCORE voltage on "
+			"menelaus: %u\n", ret);
+		return ret;
+	}
+	return 0;
+}
+
+static int n8x0_menelaus_late_init(struct device *dev)
+{
+	int ret;
+
+	ret = n8x0_auto_voltage_scale();
+	if (ret < 0)
+		return ret;
+	ret = n8x0_auto_sleep_regulators();
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] = {
+	{
+		I2C_BOARD_INFO("menelaus", 0x72),
+		.irq = INT_24XX_SYS_NIRQ,
+	},
+};
+
+static struct menelaus_platform_data n8x0_menelaus_platform_data = {
+	.late_init = n8x0_menelaus_late_init,
+};
+
+static void __init n8x0_menelaus_init(void)
+{
+	n8x0_i2c_board_info_1[0].platform_data = &n8x0_menelaus_platform_data;
+	omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1,
+			      ARRAY_SIZE(n8x0_i2c_board_info_1));
+}
+
+#else
+static inline void __init n8x0_menelaus_init(void)
+{
+}
+#endif
+
 static void __init n8x0_map_io(void)
 {
 	omap2_set_globals_242x();
-	omap2_map_common_io();
+	omap242x_map_common_io();
 }
 
 static void __init n8x0_init_irq(void)
@@ -116,7 +559,9 @@ static void __init n8x0_init_machine(void)
 				ARRAY_SIZE(n800_spi_board_info));
 
 	omap_serial_init();
+	n8x0_menelaus_init();
 	n8x0_onenand_init();
+	n8x0_mmc_init();
 }
 
 MACHINE_START(NOKIA_N800, "Nokia N800")

arch/arm/mach-omap2/board-omap3beagle.c

@@ -45,7 +45,7 @@
 #include <plat/timer-gp.h>
 
 #include "mux.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
 
 #define GPMC_CS0_BASE  0x60
 #define GPMC_CS_SIZE   0x30
@@ -108,7 +108,7 @@ static struct platform_device omap3beagle_nand_device = {
 
 #include "sdram-micron-mt46h32m32lf-6.h"
 
-static struct twl4030_hsmmc_info mmc[] = {
+static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
 		.wires		= 8,
@@ -147,7 +147,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
 	}
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
-	twl4030_mmc_init(mmc);
+	omap2_hsmmc_init(mmc);
 
 	/* link regulators to MMC adapters */
 	beagle_vmmc1_supply.dev = mmc[0].dev;
@@ -430,6 +430,12 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init omap3_beagle_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -443,7 +449,7 @@ static void __init omap3_beagle_init(void)
 	/* REVISIT leave DVI powered down until it's needed ... */
 	gpio_direction_output(170, true);
 
-	usb_musb_init();
+	usb_musb_init(&musb_board_data);
 	usb_ehci_init(&ehci_pdata);
 	omap3beagle_flash_init();
 
@@ -455,7 +461,7 @@ static void __init omap3_beagle_init(void)
 static void __init omap3_beagle_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")

arch/arm/mach-omap2/board-omap3evm.c

@@ -41,10 +41,11 @@
 #include <plat/usb.h>
 #include <plat/common.h>
 #include <plat/mcspi.h>
+#include <plat/display.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
 
 #define OMAP3_EVM_TS_GPIO	175
 #define OMAP3_EVM_EHCI_VBUS	22
@@ -147,6 +148,187 @@ static inline void __init omap3evm_init_smsc911x(void)
 static inline void __init omap3evm_init_smsc911x(void) { return; }
 #endif
 
+/*
+ * OMAP3EVM LCD Panel control signals
+ */
+#define OMAP3EVM_LCD_PANEL_LR		2
+#define OMAP3EVM_LCD_PANEL_UD		3
+#define OMAP3EVM_LCD_PANEL_INI		152
+#define OMAP3EVM_LCD_PANEL_ENVDD	153
+#define OMAP3EVM_LCD_PANEL_QVGA		154
+#define OMAP3EVM_LCD_PANEL_RESB		155
+#define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO	210
+#define OMAP3EVM_DVI_PANEL_EN_GPIO	199
+
+static int lcd_enabled;
+static int dvi_enabled;
+
+static void __init omap3_evm_display_init(void)
+{
+	int r;
+
+	r = gpio_request(OMAP3EVM_LCD_PANEL_RESB, "lcd_panel_resb");
+	if (r) {
+		printk(KERN_ERR "failed to get lcd_panel_resb\n");
+		return;
+	}
+	gpio_direction_output(OMAP3EVM_LCD_PANEL_RESB, 1);
+
+	r = gpio_request(OMAP3EVM_LCD_PANEL_INI, "lcd_panel_ini");
+	if (r) {
+		printk(KERN_ERR "failed to get lcd_panel_ini\n");
+		goto err_1;
+	}
+	gpio_direction_output(OMAP3EVM_LCD_PANEL_INI, 1);
+
+	r = gpio_request(OMAP3EVM_LCD_PANEL_QVGA, "lcd_panel_qvga");
+	if (r) {
+		printk(KERN_ERR "failed to get lcd_panel_qvga\n");
+		goto err_2;
+	}
+	gpio_direction_output(OMAP3EVM_LCD_PANEL_QVGA, 0);
+
+	r = gpio_request(OMAP3EVM_LCD_PANEL_LR, "lcd_panel_lr");
+	if (r) {
+		printk(KERN_ERR "failed to get lcd_panel_lr\n");
+		goto err_3;
+	}
+	gpio_direction_output(OMAP3EVM_LCD_PANEL_LR, 1);
+
+	r = gpio_request(OMAP3EVM_LCD_PANEL_UD, "lcd_panel_ud");
+	if (r) {
+		printk(KERN_ERR "failed to get lcd_panel_ud\n");
+		goto err_4;
+	}
+	gpio_direction_output(OMAP3EVM_LCD_PANEL_UD, 1);
+
+	r = gpio_request(OMAP3EVM_LCD_PANEL_ENVDD, "lcd_panel_envdd");
+	if (r) {
+		printk(KERN_ERR "failed to get lcd_panel_envdd\n");
+		goto err_5;
+	}
+	gpio_direction_output(OMAP3EVM_LCD_PANEL_ENVDD, 0);
+
+	return;
+
+err_5:
+	gpio_free(OMAP3EVM_LCD_PANEL_UD);
+err_4:
+	gpio_free(OMAP3EVM_LCD_PANEL_LR);
+err_3:
+	gpio_free(OMAP3EVM_LCD_PANEL_QVGA);
+err_2:
+	gpio_free(OMAP3EVM_LCD_PANEL_INI);
+err_1:
+	gpio_free(OMAP3EVM_LCD_PANEL_RESB);
+
+}
+
+static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev)
+{
+	if (dvi_enabled) {
+		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+		return -EINVAL;
+	}
+	gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 0);
+
+	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
+		gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
+	else
+		gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
+
+	lcd_enabled = 1;
+	return 0;
+}
+
+static void omap3_evm_disable_lcd(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 1);
+
+	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
+		gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
+	else
+		gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
+
+	lcd_enabled = 0;
+}
+
+static struct omap_dss_device omap3_evm_lcd_device = {
+	.name			= "lcd",
+	.driver_name		= "sharp_ls_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 18,
+	.platform_enable	= omap3_evm_enable_lcd,
+	.platform_disable	= omap3_evm_disable_lcd,
+};
+
+static int omap3_evm_enable_tv(struct omap_dss_device *dssdev)
+{
+	return 0;
+}
+
+static void omap3_evm_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+static struct omap_dss_device omap3_evm_tv_device = {
+	.name			= "tv",
+	.driver_name		= "venc",
+	.type			= OMAP_DISPLAY_TYPE_VENC,
+	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+	.platform_enable	= omap3_evm_enable_tv,
+	.platform_disable	= omap3_evm_disable_tv,
+};
+
+static int omap3_evm_enable_dvi(struct omap_dss_device *dssdev)
+{
+	if (lcd_enabled) {
+		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+		return -EINVAL;
+	}
+
+	gpio_set_value(OMAP3EVM_DVI_PANEL_EN_GPIO, 1);
+
+	dvi_enabled = 1;
+	return 0;
+}
+
+static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(OMAP3EVM_DVI_PANEL_EN_GPIO, 0);
+
+	dvi_enabled = 0;
+}
+
+static struct omap_dss_device omap3_evm_dvi_device = {
+	.name			= "dvi",
+	.driver_name		= "generic_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 24,
+	.platform_enable	= omap3_evm_enable_dvi,
+	.platform_disable	= omap3_evm_disable_dvi,
+};
+
+static struct omap_dss_device *omap3_evm_dss_devices[] = {
+	&omap3_evm_lcd_device,
+	&omap3_evm_tv_device,
+	&omap3_evm_dvi_device,
+};
+
+static struct omap_dss_board_info omap3_evm_dss_data = {
+	.num_devices	= ARRAY_SIZE(omap3_evm_dss_devices),
+	.devices	= omap3_evm_dss_devices,
+	.default_device	= &omap3_evm_lcd_device,
+};
+
+static struct platform_device omap3_evm_dss_device = {
+	.name		= "omapdss",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &omap3_evm_dss_data,
+	},
+};
+
 static struct regulator_consumer_supply omap3evm_vmmc1_supply = {
 	.supply			= "vmmc",
 };
@@ -185,7 +367,7 @@ static struct regulator_init_data omap3evm_vsim = {
 	.consumer_supplies	= &omap3evm_vsim_supply,
 };
 
-static struct twl4030_hsmmc_info mmc[] = {
+static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
 		.wires		= 4,
@@ -225,7 +407,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	omap_mux_init_gpio(63, OMAP_PIN_INPUT);
 	mmc[0].gpio_cd = gpio + 0;
-	twl4030_mmc_init(mmc);
+	omap2_hsmmc_init(mmc);
 
 	/* link regulators to MMC adapters */
 	omap3evm_vmmc1_supply.dev = mmc[0].dev;
@@ -236,6 +418,14 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 	 * the P2 connector; notably LEDA for the LCD backlight.
 	 */
 
+	/* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */
+	gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL");
+	gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
+
+	/* gpio + 7 == DVI Enable */
+	gpio_request(gpio + 7, "EN_DVI");
+	gpio_direction_output(gpio + 7, 0);
+
 	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
@@ -258,20 +448,23 @@ static struct twl4030_usb_data omap3evm_usb_data = {
 
 static int board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_A),
-	KEY(0, 3, KEY_B),
-	KEY(1, 0, KEY_DOWN),
+	KEY(0, 1, KEY_DOWN),
+	KEY(0, 2, KEY_ENTER),
+	KEY(0, 3, KEY_M),
+
+	KEY(1, 0, KEY_RIGHT),
 	KEY(1, 1, KEY_UP),
-	KEY(1, 2, KEY_E),
-	KEY(1, 3, KEY_F),
-	KEY(2, 0, KEY_ENTER),
-	KEY(2, 1, KEY_I),
+	KEY(1, 2, KEY_I),
+	KEY(1, 3, KEY_N),
+
+	KEY(2, 0, KEY_A),
+	KEY(2, 1, KEY_E),
 	KEY(2, 2, KEY_J),
-	KEY(2, 3, KEY_K),
-	KEY(3, 0, KEY_M),
-	KEY(3, 1, KEY_N),
-	KEY(3, 2, KEY_O),
+	KEY(2, 3, KEY_O),
+
+	KEY(3, 0, KEY_B),
+	KEY(3, 1, KEY_F),
+	KEY(3, 2, KEY_K),
 	KEY(3, 3, KEY_P)
 };
 
@@ -300,6 +493,47 @@ static struct twl4030_codec_data omap3evm_codec_data = {
 	.audio = &omap3evm_audio_data,
 };
 
+static struct regulator_consumer_supply omap3_evm_vdda_dac_supply = {
+	.supply		= "vdda_dac",
+	.dev		= &omap3_evm_dss_device.dev,
+};
+
+/* VDAC for DSS driving S-Video */
+static struct regulator_init_data omap3_evm_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &omap3_evm_vdda_dac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_consumer_supply omap3_evm_vpll2_supply = {
+	.supply		= "vdvi",
+	.dev		= &omap3_evm_lcd_device.dev,
+};
+
+static struct regulator_init_data omap3_evm_vpll2 = {
+	.constraints = {
+		.name			= "VDVI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &omap3_evm_vpll2_supply,
+};
+
 static struct twl4030_platform_data omap3evm_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -310,6 +544,8 @@ static struct twl4030_platform_data omap3evm_twldata = {
 	.usb		= &omap3evm_usb_data,
 	.gpio		= &omap3evm_gpio_data,
 	.codec		= &omap3evm_codec_data,
+	.vdac		= &omap3_evm_vdac,
+	.vpll2		= &omap3_evm_vpll2,
 };
 
 static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
@@ -337,15 +573,6 @@ static int __init omap3_evm_i2c_init(void)
 	return 0;
 }
 
-static struct platform_device omap3_evm_lcd_device = {
-	.name		= "omap3evm_lcd",
-	.id		= -1,
-};
-
-static struct omap_lcd_config omap3_evm_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-
 static void ads7846_dev_init(void)
 {
 	if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0)
@@ -393,7 +620,6 @@ struct spi_board_info omap3evm_spi_board_info[] = {
 };
 
 static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&omap3_evm_lcd_config },
 };
 
 static void __init omap3_evm_init_irq(void)
@@ -406,7 +632,7 @@ static void __init omap3_evm_init_irq(void)
 }
 
 static struct platform_device *omap3_evm_devices[] __initdata = {
-	&omap3_evm_lcd_device,
+	&omap3_evm_dss_device,
 };
 
 static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
@@ -424,12 +650,24 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
+				OMAP_PIN_OFF_INPUT_PULLUP |
+				OMAP_PIN_OFF_WAKEUPENABLE),
+	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
+				OMAP_PIN_OFF_INPUT_PULLUP |
+				OMAP_PIN_OFF_WAKEUPENABLE),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #else
 #define board_mux	NULL
 #endif
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init omap3_evm_init(void)
 {
 	omap3_evm_get_revision();
@@ -443,10 +681,10 @@ static void __init omap3_evm_init(void)
 				ARRAY_SIZE(omap3evm_spi_board_info));
 
 	omap_serial_init();
-#ifdef CONFIG_NOP_USB_XCEIV
+
 	/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
 	usb_nop_xceiv_register();
-#endif
+
 	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
 		/* enable EHCI VBUS using GPIO22 */
 		omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP);
@@ -469,16 +707,17 @@ static void __init omap3_evm_init(void)
 		omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
 		ehci_pdata.reset_gpio_port[1] = 135;
 	}
-	usb_musb_init();
+	usb_musb_init(&musb_board_data);
 	usb_ehci_init(&ehci_pdata);
 	ads7846_dev_init();
 	omap3evm_init_smsc911x();
+	omap3_evm_display_init();
 }
 
 static void __init omap3_evm_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 MACHINE_START(OMAP3EVM, "OMAP3 EVM")

arch/arm/mach-omap2/board-omap3pandora.c

@@ -40,10 +40,11 @@
 #include <mach/hardware.h>
 #include <plat/mcspi.h>
 #include <plat/usb.h>
+#include <plat/display.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
 
 #define OMAP3_PANDORA_TS_GPIO		94
 
@@ -192,7 +193,41 @@ static struct twl4030_keypad_data pandora_kp_data = {
 	.rep		= 1,
 };
 
-static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
+static struct omap_dss_device pandora_lcd_device = {
+	.name			= "lcd",
+	.driver_name		= "tpo_td043mtea1_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 24,
+	.reset_gpio		= 157,
+};
+
+static struct omap_dss_device pandora_tv_device = {
+	.name			= "tv",
+	.driver_name		= "venc",
+	.type			= OMAP_DISPLAY_TYPE_VENC,
+	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+};
+
+static struct omap_dss_device *pandora_dss_devices[] = {
+	&pandora_lcd_device,
+	&pandora_tv_device,
+};
+
+static struct omap_dss_board_info pandora_dss_data = {
+	.num_devices	= ARRAY_SIZE(pandora_dss_devices),
+	.devices	= pandora_dss_devices,
+	.default_device	= &pandora_lcd_device,
+};
+
+static struct platform_device pandora_dss_device = {
+	.name		= "omapdss",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &pandora_dss_data,
+	},
+};
+
+static struct omap2_hsmmc_info omap3pandora_mmc[] = {
 	{
 		.mmc		= 1,
 		.wires		= 4,
@@ -217,25 +252,13 @@ static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct regulator_consumer_supply pandora_vmmc1_supply = {
-	.supply			= "vmmc",
-};
-
-static struct regulator_consumer_supply pandora_vmmc2_supply = {
-	.supply			= "vmmc",
-};
-
 static int omap3pandora_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
 	/* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */
 	omap3pandora_mmc[0].gpio_cd = gpio + 0;
 	omap3pandora_mmc[1].gpio_cd = gpio + 1;
-	twl4030_mmc_init(omap3pandora_mmc);
-
-	/* link regulators to MMC adapters */
-	pandora_vmmc1_supply.dev = omap3pandora_mmc[0].dev;
-	pandora_vmmc2_supply.dev = omap3pandora_mmc[1].dev;
+	omap2_hsmmc_init(omap3pandora_mmc);
 
 	return 0;
 }
@@ -247,6 +270,36 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
 	.setup		= omap3pandora_twl_gpio_setup,
 };
 
+static struct regulator_consumer_supply pandora_vmmc1_supply =
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
+
+static struct regulator_consumer_supply pandora_vmmc2_supply =
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");
+
+static struct regulator_consumer_supply pandora_vdda_dac_supply =
+	REGULATOR_SUPPLY("vdda_dac", "omapdss");
+
+static struct regulator_consumer_supply pandora_vdds_supplies[] = {
+	REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+};
+
+static struct regulator_consumer_supply pandora_vcc_lcd_supply =
+	REGULATOR_SUPPLY("vcc", "display0");
+
+static struct regulator_consumer_supply pandora_usb_phy_supply =
+	REGULATOR_SUPPLY("hsusb0", "ehci-omap.0");
+
+/* ads7846 on SPI and 2 nub controllers on I2C */
+static struct regulator_consumer_supply pandora_vaux4_supplies[] = {
+	REGULATOR_SUPPLY("vcc", "spi1.0"),
+	REGULATOR_SUPPLY("vcc", "3-0066"),
+	REGULATOR_SUPPLY("vcc", "3-0067"),
+};
+
+static struct regulator_consumer_supply pandora_adac_supply =
+	REGULATOR_SUPPLY("vcc", "soc-audio");
+
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 static struct regulator_init_data pandora_vmmc1 = {
 	.constraints = {
@@ -277,6 +330,96 @@ static struct regulator_init_data pandora_vmmc2 = {
 	.consumer_supplies	= &pandora_vmmc2_supply,
 };
 
+/* VDAC for DSS driving S-Video */
+static struct regulator_init_data pandora_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &pandora_vdda_dac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data pandora_vpll2 = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_vdds_supplies),
+	.consumer_supplies	= pandora_vdds_supplies,
+};
+
+/* VAUX1 for LCD */
+static struct regulator_init_data pandora_vaux1 = {
+	.constraints = {
+		.min_uV			= 3000000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &pandora_vcc_lcd_supply,
+};
+
+/* VAUX2 for USB host PHY */
+static struct regulator_init_data pandora_vaux2 = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &pandora_usb_phy_supply,
+};
+
+/* VAUX4 for ads7846 and nubs */
+static struct regulator_init_data pandora_vaux4 = {
+	.constraints = {
+		.min_uV			= 2800000,
+		.max_uV			= 2800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(pandora_vaux4_supplies),
+	.consumer_supplies	= pandora_vaux4_supplies,
+};
+
+/* VSIM for audio DAC */
+static struct regulator_init_data pandora_vsim = {
+	.constraints = {
+		.min_uV			= 2800000,
+		.max_uV			= 2800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &pandora_adac_supply,
+};
+
 static struct twl4030_usb_data omap3pandora_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
@@ -298,6 +441,12 @@ static struct twl4030_platform_data omap3pandora_twldata = {
 	.codec		= &omap3pandora_codec_data,
 	.vmmc1		= &pandora_vmmc1,
 	.vmmc2		= &pandora_vmmc2,
+	.vdac		= &pandora_vdac,
+	.vpll2		= &pandora_vpll2,
+	.vaux1		= &pandora_vaux1,
+	.vaux2		= &pandora_vaux2,
+	.vaux4		= &pandora_vaux4,
+	.vsim		= &pandora_vsim,
 	.keypad		= &pandora_kp_data,
 };
 
@@ -365,6 +514,12 @@ static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
 		.controller_data	= &ads7846_mcspi_config,
 		.irq			= OMAP_GPIO_IRQ(OMAP3_PANDORA_TS_GPIO),
 		.platform_data		= &ads7846_config,
+	}, {
+		.modalias		= "tpo_td043mtea1_panel_spi",
+		.bus_num		= 1,
+		.chip_select		= 1,
+		.max_speed_hz		= 375000,
+		.platform_data		= &pandora_lcd_device,
 	}
 };
 
@@ -379,6 +534,7 @@ static void __init omap3pandora_init_irq(void)
 static struct platform_device *omap3pandora_devices[] __initdata = {
 	&pandora_leds_gpio,
 	&pandora_keys_gpio,
+	&pandora_dss_device,
 };
 
 static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
@@ -401,6 +557,12 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init omap3pandora_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -413,7 +575,7 @@ static void __init omap3pandora_init(void)
 	omap3pandora_ads7846_init();
 	usb_ehci_init(&ehci_pdata);
 	pandora_keys_gpio_init();
-	usb_musb_init();
+	usb_musb_init(&musb_board_data);
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
@@ -423,7 +585,7 @@ static void __init omap3pandora_init(void)
 static void __init omap3pandora_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -50,7 +50,7 @@
 #include <plat/timer-gp.h>
 
 #include "mux.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
 
 #include <asm/setup.h>
 
@@ -122,7 +122,7 @@ static struct platform_device omap3touchbook_nand_device = {
 
 #include "sdram-micron-mt46h32m32lf-6.h"
 
-static struct twl4030_hsmmc_info mmc[] = {
+static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
 		.wires		= 8,
@@ -161,7 +161,7 @@ static int touchbook_twl_gpio_setup(struct device *dev,
 	}
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
-	twl4030_mmc_init(mmc);
+	omap2_hsmmc_init(mmc);
 
 	/* link regulators to MMC adapters */
 	touchbook_vmmc1_supply.dev = mmc[0].dev;
@@ -527,6 +527,12 @@ static void __init early_touchbook_revision(char **p)
 }
 __early_param("tbr=", early_touchbook_revision);
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init omap3_touchbook_init(void)
 {
 	pm_power_off = omap3_touchbook_poweroff;
@@ -545,7 +551,7 @@ static void __init omap3_touchbook_init(void)
 	spi_register_board_info(omap3_ads7846_spi_board_info,
 				ARRAY_SIZE(omap3_ads7846_spi_board_info));
 	omap3_ads7846_init();
-	usb_musb_init();
+	usb_musb_init(&musb_board_data);
 	usb_ehci_init(&ehci_pdata);
 	omap3touchbook_flash_init();
 
@@ -557,7 +563,7 @@ static void __init omap3_touchbook_init(void)
 static void __init omap3_touchbook_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")

arch/arm/mach-omap2/board-overo.c

@@ -48,7 +48,7 @@
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
 
 #define OVERO_GPIO_BT_XGATE	15
 #define OVERO_GPIO_W2W_NRESET	16
@@ -272,7 +272,7 @@ static void __init overo_flash_init(void)
 	}
 }
 
-static struct twl4030_hsmmc_info mmc[] = {
+static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
 		.wires		= 4,
@@ -297,7 +297,7 @@ static struct regulator_consumer_supply overo_vmmc1_supply = {
 static int overo_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
-	twl4030_mmc_init(mmc);
+	omap2_hsmmc_init(mmc);
 
 	overo_vmmc1_supply.dev = mmc[0].dev;
 
@@ -413,6 +413,12 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init overo_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -420,7 +426,7 @@ static void __init overo_init(void)
 	platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
 	omap_serial_init();
 	overo_flash_init();
-	usb_musb_init();
+	usb_musb_init(&musb_board_data);
 	usb_ehci_init(&ehci_pdata);
 	overo_ads7846_init();
 	overo_init_smsc911x();
@@ -469,7 +475,7 @@ static void __init overo_init(void)
 static void __init overo_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 MACHINE_START(OVERO, "Gumstix Overo")

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -34,7 +34,7 @@
 #include <plat/gpmc-smc91x.h>
 
 #include "mux.h"
-#include "mmc-twl4030.h"
+#include "hsmmc.h"
 
 #define SYSTEM_REV_B_USES_VAUX3	0x1699
 #define SYSTEM_REV_S_USES_VAUX3 0x8
@@ -209,7 +209,47 @@ static struct twl4030_madc_platform_data rx51_madc_data = {
 	.irq_line		= 1,
 };
 
-static struct twl4030_hsmmc_info mmc[] = {
+/* Enable input logic and pull all lines up when eMMC is on. */
+static struct omap_board_mux rx51_mmc2_on_mux[] = {
+	OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT0, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT1, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT2, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT3, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT4, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT5, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT6, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT7, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+/* Disable input logic and pull all lines down when eMMC is off. */
+static struct omap_board_mux rx51_mmc2_off_mux[] = {
+	OMAP3_MUX(SDMMC2_CMD, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT0, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT1, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT2, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT3, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT4, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT5, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT6, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	OMAP3_MUX(SDMMC2_DAT7, OMAP_PULL_ENA | OMAP_MUX_MODE0),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+/*
+ * Current flows to eMMC when eMMC is off and the data lines are pulled up,
+ * so pull them down. N.B. we pull 8 lines because we are using 8 lines.
+ */
+static void rx51_mmc2_remux(struct device *dev, int slot, int power_on)
+{
+	if (power_on)
+		omap_mux_write_array(rx51_mmc2_on_mux);
+	else
+		omap_mux_write_array(rx51_mmc2_off_mux);
+}
+
+static struct omap2_hsmmc_info mmc[] __initdata = {
 	{
 		.name		= "external",
 		.mmc		= 1,
@@ -222,25 +262,29 @@ static struct twl4030_hsmmc_info mmc[] = {
 	{
 		.name		= "internal",
 		.mmc		= 2,
-		.wires		= 8,
+		.wires		= 8, /* See also rx51_mmc2_remux */
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
 		.nonremovable	= true,
 		.power_saving	= true,
+		.remux		= rx51_mmc2_remux,
 	},
 	{}	/* Terminator */
 };
 
 static struct regulator_consumer_supply rx51_vmmc1_supply = {
-	.supply			= "vmmc",
+	.supply   = "vmmc",
+	.dev_name = "mmci-omap-hs.0",
 };
 
 static struct regulator_consumer_supply rx51_vmmc2_supply = {
-	.supply			= "vmmc",
+	.supply   = "vmmc",
+	.dev_name = "mmci-omap-hs.1",
 };
 
 static struct regulator_consumer_supply rx51_vsim_supply = {
-	.supply			= "vmmc_aux",
+	.supply   = "vmmc_aux",
+	.dev_name = "mmci-omap-hs.1",
 };
 
 static struct regulator_init_data rx51_vaux1 = {
@@ -375,12 +419,6 @@ static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
 	gpio_request(gpio + 7, "speaker_en");
 	gpio_direction_output(gpio + 7, 1);
 
-	/* set up MMC adapters, linking their regulators to them */
-	twl4030_mmc_init(mmc);
-	rx51_vmmc1_supply.dev = mmc[0].dev;
-	rx51_vmmc2_supply.dev = mmc[1].dev;
-	rx51_vsim_supply.dev = mmc[1].dev;
-
 	return 0;
 }
 
@@ -751,5 +789,6 @@ void __init rx51_peripherals_init(void)
 	rx51_init_wl1251();
 	spi_register_board_info(rx51_peripherals_spi_board_info,
 				ARRAY_SIZE(rx51_peripherals_spi_board_info));
+	omap2_hsmmc_init(mmc);
 }
 

arch/arm/mach-omap2/board-rx51.c

@@ -16,6 +16,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/leds.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -30,9 +31,49 @@
 #include <plat/usb.h>
 
 #include "mux.h"
+#include "pm.h"
+
+#define RX51_GPIO_SLEEP_IND 162
 
 struct omap_sdrc_params *rx51_get_sdram_timings(void);
 
+static struct gpio_led gpio_leds[] = {
+	{
+		.name	= "sleep_ind",
+		.gpio	= RX51_GPIO_SLEEP_IND,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static struct cpuidle_params rx51_cpuidle_params[] = {
+	/* C1 */
+	{1, 110, 162, 5},
+	/* C2 */
+	{1, 106, 180, 309},
+	/* C3 */
+	{0, 107, 410, 46057},
+	/* C4 */
+	{0, 121, 3374, 46057},
+	/* C5 */
+	{1, 855, 1146, 46057},
+	/* C6 */
+	{0, 7580, 4134, 484329},
+	/* C7 */
+	{1, 7505, 15274, 484329},
+};
+
 static struct omap_lcd_config rx51_lcd_config = {
 	.ctrl_name	= "internal",
 };
@@ -62,6 +103,7 @@ static void __init rx51_init_irq(void)
 
 	omap_board_config = rx51_config;
 	omap_board_config_size = ARRAY_SIZE(rx51_config);
+	omap3_pm_init_cpuidle(rx51_cpuidle_params);
 	sdrc_params = rx51_get_sdram_timings();
 	omap2_init_common_hw(sdrc_params, sdrc_params);
 	omap_init_irq();
@@ -78,22 +120,30 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_PERIPHERAL,
+	.power			= 0,
+};
+
 static void __init rx51_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_serial_init();
-	usb_musb_init();
+	usb_musb_init(&musb_board_data);
 	rx51_peripherals_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
+
+	platform_device_register(&leds_gpio);
 }
 
 static void __init rx51_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")

arch/arm/mach-omap2/board-sdp-flash.c

@@ -0,0 +1,272 @@
+/*
+ * board-sdp-flash.c
+ * Modified from mach-omap2/board-3430sdp-flash.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Vimal Singh <vimalsingh@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+
+#include <plat/gpmc.h>
+#include <plat/nand.h>
+#include <plat/onenand.h>
+#include <plat/tc.h>
+#include <mach/board-sdp.h>
+
+#define REG_FPGA_REV			0x10
+#define REG_FPGA_DIP_SWITCH_INPUT2	0x60
+#define MAX_SUPPORTED_GPMC_CONFIG	3
+
+#define DEBUG_BASE		0x08000000 /* debug board */
+
+#define PDC_NOR		1
+#define PDC_NAND	2
+#define PDC_ONENAND	3
+#define DBG_MPDB	4
+
+/* various memory sizes */
+#define FLASH_SIZE_SDPV1	SZ_64M	/* NOR flash (64 Meg aligned) */
+#define FLASH_SIZE_SDPV2	SZ_128M	/* NOR flash (256 Meg aligned) */
+
+/*
+ * SDP3430 V2 Board CS organization
+ * Different from SDP3430 V1. Now 4 switches used to specify CS
+ *
+ * See also the Switch S8 settings in the comments.
+ *
+ * REVISIT: Add support for 2430 SDP
+ */
+static const unsigned char chip_sel_sdp[][GPMC_CS_NUM] = {
+	{PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
+	{PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
+	{PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
+};
+
+static struct physmap_flash_data sdp_nor_data = {
+	.width		= 2,
+};
+
+static struct resource sdp_nor_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device sdp_nor_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+			.platform_data = &sdp_nor_data,
+	},
+	.num_resources	= 1,
+	.resource	= &sdp_nor_resource,
+};
+
+static void
+__init board_nor_init(struct flash_partitions sdp_nor_parts, u8 cs)
+{
+	int err;
+
+	sdp_nor_data.parts	= sdp_nor_parts.parts;
+	sdp_nor_data.nr_parts	= sdp_nor_parts.nr_parts;
+
+	/* Configure start address and size of NOR device */
+	if (omap_rev() >= OMAP3430_REV_ES1_0) {
+		err = gpmc_cs_request(cs, FLASH_SIZE_SDPV2 - 1,
+				(unsigned long *)&sdp_nor_resource.start);
+		sdp_nor_resource.end = sdp_nor_resource.start
+					+ FLASH_SIZE_SDPV2 - 1;
+	} else {
+		err = gpmc_cs_request(cs, FLASH_SIZE_SDPV1 - 1,
+				(unsigned long *)&sdp_nor_resource.start);
+		sdp_nor_resource.end = sdp_nor_resource.start
+					+ FLASH_SIZE_SDPV1 - 1;
+	}
+	if (err < 0) {
+		printk(KERN_ERR "NOR: Can't request GPMC CS\n");
+		return;
+	}
+	if (platform_device_register(&sdp_nor_device) < 0)
+		printk(KERN_ERR	"Unable to register NOR device\n");
+}
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+static struct omap_onenand_platform_data board_onenand_data = {
+	.dma_channel	= -1,   /* disable DMA in OMAP OneNAND driver */
+};
+
+static void
+__init board_onenand_init(struct flash_partitions sdp_onenand_parts, u8 cs)
+{
+	board_onenand_data.cs		= cs;
+	board_onenand_data.parts	= sdp_onenand_parts.parts;
+	board_onenand_data.nr_parts	= sdp_onenand_parts.nr_parts;
+
+	gpmc_onenand_init(&board_onenand_data);
+}
+#else
+static void
+__init board_onenand_init(struct flash_partitions sdp_onenand_parts, u8 cs)
+{
+}
+#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || \
+		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+
+/* Note that all values in this struct are in nanoseconds */
+static struct gpmc_timings nand_timings = {
+
+	.sync_clk = 0,
+
+	.cs_on = 0,
+	.cs_rd_off = 36,
+	.cs_wr_off = 36,
+
+	.adv_on = 6,
+	.adv_rd_off = 24,
+	.adv_wr_off = 36,
+
+	.we_off = 30,
+	.oe_off = 48,
+
+	.access = 54,
+	.rd_cycle = 72,
+	.wr_cycle = 72,
+
+	.wr_access = 30,
+	.wr_data_mux_bus = 0,
+};
+
+static struct omap_nand_platform_data sdp_nand_data = {
+	.nand_setup	= NULL,
+	.gpmc_t		= &nand_timings,
+	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
+	.dev_ready	= NULL,
+	.devsize	= 0,	/* '0' for 8-bit, '1' for 16-bit device */
+};
+
+static void
+__init board_nand_init(struct flash_partitions sdp_nand_parts, u8 cs)
+{
+	sdp_nand_data.cs		= cs;
+	sdp_nand_data.parts		= sdp_nand_parts.parts;
+	sdp_nand_data.nr_parts		= sdp_nand_parts.nr_parts;
+
+	sdp_nand_data.gpmc_cs_baseaddr	= (void *)(OMAP34XX_GPMC_VIRT +
+							GPMC_CS0_BASE +
+							cs * GPMC_CS_SIZE);
+	sdp_nand_data.gpmc_baseaddr	 = (void *) (OMAP34XX_GPMC_VIRT);
+
+	gpmc_nand_init(&sdp_nand_data);
+}
+#else
+static void
+__init board_nand_init(struct flash_partitions sdp_nand_parts, u8 cs)
+{
+}
+#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
+
+/**
+ * get_gpmc0_type - Reads the FPGA DIP_SWITCH_INPUT_REGISTER2 to get
+ * the various cs values.
+ */
+static u8 get_gpmc0_type(void)
+{
+	u8 cs = 0;
+	void __iomem *fpga_map_addr;
+
+	fpga_map_addr = ioremap(DEBUG_BASE, 4096);
+	if (!fpga_map_addr)
+		return -ENOMEM;
+
+	if (!(__raw_readw(fpga_map_addr + REG_FPGA_REV)))
+		/* we dont have an DEBUG FPGA??? */
+		/* Depend on #defines!! default to strata boot return param */
+		goto unmap;
+
+	/* S8-DIP-OFF = 1, S8-DIP-ON = 0 */
+	cs = __raw_readw(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf;
+
+	/* ES2.0 SDP's onwards 4 dip switches are provided for CS */
+	if (omap_rev() >= OMAP3430_REV_ES1_0)
+		/* change (S8-1:4=DS-2:0) to (S8-4:1=DS-2:0) */
+		cs = ((cs & 8) >> 3) | ((cs & 4) >> 1) |
+			((cs & 2) << 1) | ((cs & 1) << 3);
+	else
+		/* change (S8-1:3=DS-2:0) to (S8-3:1=DS-2:0) */
+		cs = ((cs & 4) >> 2) | (cs & 2) | ((cs & 1) << 2);
+unmap:
+	iounmap(fpga_map_addr);
+	return cs;
+}
+
+/**
+ * sdp3430_flash_init - Identify devices connected to GPMC and register.
+ *
+ * @return - void.
+ */
+void __init sdp_flash_init(struct flash_partitions sdp_partition_info[])
+{
+	u8		cs = 0;
+	u8		norcs = GPMC_CS_NUM + 1;
+	u8		nandcs = GPMC_CS_NUM + 1;
+	u8		onenandcs = GPMC_CS_NUM + 1;
+	u8		idx;
+	unsigned char	*config_sel = NULL;
+
+	/* REVISIT: Is this return correct idx for 2430 SDP?
+	 * for which cs configuration matches for 2430 SDP?
+	 */
+	idx = get_gpmc0_type();
+	if (idx >= MAX_SUPPORTED_GPMC_CONFIG) {
+		printk(KERN_ERR "%s: Invalid chip select: %d\n", __func__, cs);
+		return;
+	}
+	config_sel = (unsigned char *)(chip_sel_sdp[idx]);
+
+	while (cs < GPMC_CS_NUM) {
+		switch (config_sel[cs]) {
+		case PDC_NOR:
+			if (norcs > GPMC_CS_NUM)
+				norcs = cs;
+			break;
+		case PDC_NAND:
+			if (nandcs > GPMC_CS_NUM)
+				nandcs = cs;
+			break;
+		case PDC_ONENAND:
+			if (onenandcs > GPMC_CS_NUM)
+				onenandcs = cs;
+			break;
+		};
+		cs++;
+	}
+
+	if (norcs > GPMC_CS_NUM)
+		printk(KERN_INFO "OneNAND: Unable to find configuration "
+				" in GPMC\n ");
+	else
+		board_nor_init(sdp_partition_info[0], norcs);
+
+	if (onenandcs > GPMC_CS_NUM)
+		printk(KERN_INFO "OneNAND: Unable to find configuration "
+				" in GPMC\n ");
+	else
+		board_onenand_init(sdp_partition_info[1], onenandcs);
+
+	if (nandcs > GPMC_CS_NUM)
+		printk(KERN_INFO "NAND: Unable to find configuration "
+				" in GPMC\n ");
+	else
+		board_nand_init(sdp_partition_info[2], nandcs);
+}

arch/arm/mach-omap2/board-zoom-peripherals.c

@@ -24,7 +24,8 @@
 #include <plat/common.h>
 #include <plat/usb.h>
 
-#include "mmc-twl4030.h"
+#include "mux.h"
+#include "hsmmc.h"
 
 /* Zoom2 has Qwerty keyboard*/
 static int board_keymap[] = {
@@ -150,7 +151,7 @@ static struct regulator_init_data zoom_vsim = {
 	.consumer_supplies      = &zoom_vsim_supply,
 };
 
-static struct twl4030_hsmmc_info mmc[] __initdata = {
+static struct omap2_hsmmc_info mmc[] __initdata = {
 	{
 		.name		= "external",
 		.mmc		= 1,
@@ -175,7 +176,7 @@ static int zoom_twl_gpio_setup(struct device *dev,
 {
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
-	twl4030_mmc_init(mmc);
+	omap2_hsmmc_init(mmc);
 
 	/* link regulators to MMC adapters ... we "know" the
 	 * regulators will be set up only *after* we return.
@@ -263,9 +264,23 @@ static int __init omap_i2c_init(void)
 	return 0;
 }
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
+static void enable_board_wakeup_source(void)
+{
+	/* T2 interrupt line (keypad) */
+	omap_mux_init_signal("sys_nirq",
+		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
+}
+
 void __init zoom_peripherals_init(void)
 {
 	omap_i2c_init();
 	omap_serial_init();
-	usb_musb_init();
+	usb_musb_init(&musb_board_data);
+	enable_board_wakeup_source();
 }

arch/arm/mach-omap2/board-zoom2.c

@@ -87,7 +87,7 @@ static void __init omap_zoom2_init(void)
 static void __init omap_zoom2_map_io(void)
 {
 	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap34xx_map_common_io();
 }
 
 MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")

arch/arm/mach-omap2/board-zoom3.c

@@ -20,14 +20,15 @@
 
 #include <plat/common.h>
 #include <plat/board.h>
+#include <plat/usb.h>
 
 #include "mux.h"
 #include "sdram-hynix-h8mbx00u0mer-0em.h"
 
 static void __init omap_zoom_map_io(void)
 {
-	omap2_set_globals_343x();
-	omap2_map_common_io();
+	omap2_set_globals_36xx();
+	omap34xx_map_common_io();
 }
 
 static struct omap_board_config_kernel zoom_config[] __initdata = {
@@ -51,11 +52,24 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+	.port_mode[0]		= EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[1]		= EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2]		= EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.phy_reset		= true,
+	.reset_gpio_port[0]	= -EINVAL,
+	.reset_gpio_port[1]	= 64,
+	.reset_gpio_port[2]	= -EINVAL,
+};
+
 static void __init omap_zoom_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
 	zoom_peripherals_init();
 	zoom_debugboard_init();
+
+	omap_mux_init_gpio(64, OMAP_PIN_OUTPUT);
+	usb_ehci_init(&ehci_pdata);
 }
 
 MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")

arch/arm/mach-omap2/clkt2xxx_apll.c

@@ -0,0 +1,122 @@
+/*
+ * OMAP2xxx APLL clock control functions
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ * Gordon McNutt and RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+#include <plat/prcm.h>
+
+#include "clock.h"
+#include "clock2xxx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+
+/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
+#define EN_APLL_STOPPED			0
+#define EN_APLL_LOCKED			3
+
+/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */
+#define APLLS_CLKIN_19_2MHZ		0
+#define APLLS_CLKIN_13MHZ		2
+#define APLLS_CLKIN_12MHZ		3
+
+void __iomem *cm_idlest_pll;
+
+/* Private functions */
+
+/* Enable an APLL if off */
+static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask)
+{
+	u32 cval, apll_mask;
+
+	apll_mask = EN_APLL_LOCKED << clk->enable_bit;
+
+	cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+
+	if ((cval & apll_mask) == apll_mask)
+		return 0;   /* apll already enabled */
+
+	cval &= ~apll_mask;
+	cval |= apll_mask;
+	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
+
+	omap2_cm_wait_idlest(cm_idlest_pll, status_mask,
+			     OMAP24XX_CM_IDLEST_VAL, clk->name);
+
+	/*
+	 * REVISIT: Should we return an error code if omap2_wait_clock_ready()
+	 * fails?
+	 */
+	return 0;
+}
+
+static int omap2_clk_apll96_enable(struct clk *clk)
+{
+	return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL);
+}
+
+static int omap2_clk_apll54_enable(struct clk *clk)
+{
+	return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL);
+}
+
+/* Stop APLL */
+static void omap2_clk_apll_disable(struct clk *clk)
+{
+	u32 cval;
+
+	cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	cval &= ~(EN_APLL_LOCKED << clk->enable_bit);
+	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
+}
+
+/* Public data */
+
+const struct clkops clkops_apll96 = {
+	.enable		= omap2_clk_apll96_enable,
+	.disable	= omap2_clk_apll_disable,
+};
+
+const struct clkops clkops_apll54 = {
+	.enable		= omap2_clk_apll54_enable,
+	.disable	= omap2_clk_apll_disable,
+};
+
+/* Public functions */
+
+u32 omap2xxx_get_apll_clkin(void)
+{
+	u32 aplls, srate = 0;
+
+	aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
+	aplls &= OMAP24XX_APLLS_CLKIN_MASK;
+	aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
+
+	if (aplls == APLLS_CLKIN_19_2MHZ)
+		srate = 19200000;
+	else if (aplls == APLLS_CLKIN_13MHZ)
+		srate = 13000000;
+	else if (aplls == APLLS_CLKIN_12MHZ)
+		srate = 12000000;
+
+	return srate;
+}
+

arch/arm/mach-omap2/clkt2xxx_dpllcore.c

@@ -0,0 +1,173 @@
+/*
+ * DPLL + CORE_CLK composite clock functions
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ * Gordon McNutt and RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX The DPLL and CORE clocks should be split into two separate clock
+ * types.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/sdrc.h>
+
+#include "clock.h"
+#include "clock2xxx.h"
+#include "opp2xxx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+
+/* #define DOWN_VARIABLE_DPLL 1 */		/* Experimental */
+
+/**
+ * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
+ * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
+ *
+ * Returns the CORE_CLK rate.  CORE_CLK can have one of three rate
+ * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
+ * (the latter is unusual).  This currently should be called with
+ * struct clk *dpll_ck, which is a composite clock of dpll_ck and
+ * core_ck.
+ */
+unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
+{
+	long long core_clk;
+	u32 v;
+
+	core_clk = omap2_get_dpll_rate(clk);
+
+	v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	v &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	if (v == CORE_CLK_SRC_32K)
+		core_clk = 32768;
+	else
+		core_clk *= v;
+
+	return core_clk;
+}
+
+/*
+ * Uses the current prcm set to tell if a rate is valid.
+ * You can go slower, but not faster within a given rate set.
+ */
+static long omap2_dpllcore_round_rate(unsigned long target_rate)
+{
+	u32 high, low, core_clk_src;
+
+	core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	if (core_clk_src == CORE_CLK_SRC_DPLL) {	/* DPLL clockout */
+		high = curr_prcm_set->dpll_speed * 2;
+		low = curr_prcm_set->dpll_speed;
+	} else {				/* DPLL clockout x 2 */
+		high = curr_prcm_set->dpll_speed;
+		low = curr_prcm_set->dpll_speed / 2;
+	}
+
+#ifdef DOWN_VARIABLE_DPLL
+	if (target_rate > high)
+		return high;
+	else
+		return target_rate;
+#else
+	if (target_rate > low)
+		return high;
+	else
+		return low;
+#endif
+
+}
+
+unsigned long omap2_dpllcore_recalc(struct clk *clk)
+{
+	return omap2xxx_clk_get_core_rate(clk);
+}
+
+int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
+{
+	u32 cur_rate, low, mult, div, valid_rate, done_rate;
+	u32 bypass = 0;
+	struct prcm_config tmpset;
+	const struct dpll_data *dd;
+
+	cur_rate = omap2xxx_clk_get_core_rate(dclk);
+	mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	mult &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	if ((rate == (cur_rate / 2)) && (mult == 2)) {
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
+	} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
+	} else if (rate != cur_rate) {
+		valid_rate = omap2_dpllcore_round_rate(rate);
+		if (valid_rate != rate)
+			return -EINVAL;
+
+		if (mult == 1)
+			low = curr_prcm_set->dpll_speed;
+		else
+			low = curr_prcm_set->dpll_speed / 2;
+
+		dd = clk->dpll_data;
+		if (!dd)
+			return -EINVAL;
+
+		tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
+		tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
+					   dd->div1_mask);
+		div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
+		tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+		tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
+		if (rate > low) {
+			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
+			mult = ((rate / 2) / 1000000);
+			done_rate = CORE_CLK_SRC_DPLL_X2;
+		} else {
+			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL;
+			mult = (rate / 1000000);
+			done_rate = CORE_CLK_SRC_DPLL;
+		}
+		tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask));
+		tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask));
+
+		/* Worst case */
+		tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS;
+
+		if (rate == curr_prcm_set->xtal_speed)	/* If asking for 1-1 */
+			bypass = 1;
+
+		/* For omap2xxx_sdrc_init_params() */
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
+
+		/* Force dll lock mode */
+		omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
+			       bypass);
+
+		/* Errata: ret dll entry state */
+		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
+		omap2xxx_sdrc_reprogram(done_rate, 0);
+	}
+
+	return 0;
+}
+

arch/arm/mach-omap2/clkt2xxx_osc.c

@@ -0,0 +1,62 @@
+/*
+ * OMAP2xxx osc_clk-specific clock code
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ * Gordon McNutt and RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "clock2xxx.h"
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+
+static int omap2_enable_osc_ck(struct clk *clk)
+{
+	u32 pcc;
+
+	pcc = __raw_readl(prcm_clksrc_ctrl);
+
+	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
+
+	return 0;
+}
+
+static void omap2_disable_osc_ck(struct clk *clk)
+{
+	u32 pcc;
+
+	pcc = __raw_readl(prcm_clksrc_ctrl);
+
+	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
+}
+
+const struct clkops clkops_oscck = {
+	.enable		= omap2_enable_osc_ck,
+	.disable	= omap2_disable_osc_ck,
+};
+
+unsigned long omap2_osc_clk_recalc(struct clk *clk)
+{
+	return omap2xxx_get_apll_clkin() * omap2xxx_get_sysclkdiv();
+}
+

arch/arm/mach-omap2/clkt2xxx_sys.c

@@ -0,0 +1,50 @@
+/*
+ * OMAP2xxx sys_clk-specific clock code
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ * Gordon McNutt and RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "clock2xxx.h"
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+
+void __iomem *prcm_clksrc_ctrl;
+
+u32 omap2xxx_get_sysclkdiv(void)
+{
+	u32 div;
+
+	div = __raw_readl(prcm_clksrc_ctrl);
+	div &= OMAP_SYSCLKDIV_MASK;
+	div >>= OMAP_SYSCLKDIV_SHIFT;
+
+	return div;
+}
+
+unsigned long omap2xxx_sys_clk_recalc(struct clk *clk)
+{
+	return clk->parent->rate / omap2xxx_get_sysclkdiv();
+}
+
+

arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c

@@ -0,0 +1,254 @@
+/*
+ * OMAP2xxx DVFS virtual clock functions
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ * Gordon McNutt and RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX Some of this code should be replaceable by the upcoming OPP layer
+ * code.  However, some notion of "rate set" is probably still necessary
+ * for OMAP2xxx at least.  Rate sets should be generalized so they can be
+ * used for any OMAP chip, not just OMAP2xxx.  In particular, Richard Woodruff
+ * has in the past expressed a preference to use rate sets for OPP changes,
+ * rather than dynamically recalculating the clock tree, so if someone wants
+ * this badly enough to write the code to handle it, we should support it
+ * as an option.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/cpufreq.h>
+
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/sdrc.h>
+
+#include "clock.h"
+#include "clock2xxx.h"
+#include "opp2xxx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+
+const struct prcm_config *curr_prcm_set;
+const struct prcm_config *rate_table;
+
+/**
+ * omap2_table_mpu_recalc - just return the MPU speed
+ * @clk: virt_prcm_set struct clk
+ *
+ * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
+ */
+unsigned long omap2_table_mpu_recalc(struct clk *clk)
+{
+	return curr_prcm_set->mpu_speed;
+}
+
+/*
+ * Look for a rate equal or less than the target rate given a configuration set.
+ *
+ * What's not entirely clear is "which" field represents the key field.
+ * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
+ * just uses the ARM rates.
+ */
+long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
+{
+	const struct prcm_config *ptr;
+	long highest_rate;
+	long sys_ck_rate;
+
+	sys_ck_rate = clk_get_rate(sclk);
+
+	highest_rate = -EINVAL;
+
+	for (ptr = rate_table; ptr->mpu_speed; ptr++) {
+		if (!(ptr->flags & cpu_mask))
+			continue;
+		if (ptr->xtal_speed != sys_ck_rate)
+			continue;
+
+		highest_rate = ptr->mpu_speed;
+
+		/* Can check only after xtal frequency check */
+		if (ptr->mpu_speed <= rate)
+			break;
+	}
+	return highest_rate;
+}
+
+/* Sets basic clocks based on the specified rate */
+int omap2_select_table_rate(struct clk *clk, unsigned long rate)
+{
+	u32 cur_rate, done_rate, bypass = 0, tmp;
+	const struct prcm_config *prcm;
+	unsigned long found_speed = 0;
+	unsigned long flags;
+	long sys_ck_rate;
+
+	sys_ck_rate = clk_get_rate(sclk);
+
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+
+		if (prcm->xtal_speed != sys_ck_rate)
+			continue;
+
+		if (prcm->mpu_speed <= rate) {
+			found_speed = prcm->mpu_speed;
+			break;
+		}
+	}
+
+	if (!found_speed) {
+		printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
+		       rate / 1000000);
+		return -EINVAL;
+	}
+
+	curr_prcm_set = prcm;
+	cur_rate = omap2xxx_clk_get_core_rate(dclk);
+
+	if (prcm->dpll_speed == cur_rate / 2) {
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
+	} else if (prcm->dpll_speed == cur_rate * 2) {
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
+	} else if (prcm->dpll_speed != cur_rate) {
+		local_irq_save(flags);
+
+		if (prcm->dpll_speed == prcm->xtal_speed)
+			bypass = 1;
+
+		if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) ==
+		    CORE_CLK_SRC_DPLL_X2)
+			done_rate = CORE_CLK_SRC_DPLL_X2;
+		else
+			done_rate = CORE_CLK_SRC_DPLL;
+
+		/* MPU divider */
+		cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
+
+		/* dsp + iva1 div(2420), iva2.1(2430) */
+		cm_write_mod_reg(prcm->cm_clksel_dsp,
+				 OMAP24XX_DSP_MOD, CM_CLKSEL);
+
+		cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
+
+		/* Major subsystem dividers */
+		tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
+		cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
+				 CM_CLKSEL1);
+
+		if (cpu_is_omap2430())
+			cm_write_mod_reg(prcm->cm_clksel_mdm,
+					 OMAP2430_MDM_MOD, CM_CLKSEL);
+
+		/* x2 to enter omap2xxx_sdrc_init_params() */
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
+
+		omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
+			       bypass);
+
+		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
+		omap2xxx_sdrc_reprogram(done_rate, 0);
+
+		local_irq_restore(flags);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_CPU_FREQ
+/*
+ * Walk PRCM rate table and fillout cpufreq freq_table
+ * XXX This should be replaced by an OPP layer in the near future
+ */
+static struct cpufreq_frequency_table *freq_table;
+
+void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+	const struct prcm_config *prcm;
+	long sys_ck_rate;
+	int i = 0;
+	int tbl_sz = 0;
+
+	if (!cpu_is_omap24xx())
+		return;
+
+	sys_ck_rate = clk_get_rate(sclk);
+
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck_rate)
+			continue;
+
+		/* don't put bypass rates in table */
+		if (prcm->dpll_speed == prcm->xtal_speed)
+			continue;
+
+		tbl_sz++;
+	}
+
+	/*
+	 * XXX Ensure that we're doing what CPUFreq expects for this error
+	 * case and the following one
+	 */
+	if (tbl_sz == 0) {
+		pr_warning("%s: no matching entries in rate_table\n",
+			   __func__);
+		return;
+	}
+
+	/* Include the CPUFREQ_TABLE_END terminator entry */
+	tbl_sz++;
+
+	freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
+			     GFP_ATOMIC);
+	if (!freq_table) {
+		pr_err("%s: could not kzalloc frequency table\n", __func__);
+		return;
+	}
+
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck_rate)
+			continue;
+
+		/* don't put bypass rates in table */
+		if (prcm->dpll_speed == prcm->xtal_speed)
+			continue;
+
+		freq_table[i].index = i;
+		freq_table[i].frequency = prcm->mpu_speed / 1000;
+		i++;
+	}
+
+	freq_table[i].index = i;
+	freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+	*table = &freq_table[0];
+}
+
+void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+	if (!cpu_is_omap24xx())
+		return;
+
+	kfree(freq_table);
+}
+
+#endif

arch/arm/mach-omap2/clkt34xx_dpll3m2.c

@@ -0,0 +1,121 @@
+/*
+ * OMAP34xx M2 divider clock code
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ *
+ * Paul Walmsley
+ * Jouni Högander
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/sdrc.h>
+
+#include "clock.h"
+#include "clock3xxx.h"
+#include "clock34xx.h"
+#include "sdrc.h"
+
+#define CYCLES_PER_MHZ			1000000
+
+/*
+ * CORE DPLL (DPLL3) M2 divider rate programming functions
+ *
+ * These call into SRAM code to do the actual CM writes, since the SDRAM
+ * is clocked from DPLL3.
+ */
+
+/**
+ * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider
+ * @clk: struct clk * of DPLL to set
+ * @rate: rounded target rate
+ *
+ * Program the DPLL M2 divider with the rounded target rate.  Returns
+ * -EINVAL upon error, or 0 upon success.
+ */
+int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 new_div = 0;
+	u32 unlock_dll = 0;
+	u32 c;
+	unsigned long validrate, sdrcrate, _mpurate;
+	struct omap_sdrc_params *sdrc_cs0;
+	struct omap_sdrc_params *sdrc_cs1;
+	int ret;
+
+	if (!clk || !rate)
+		return -EINVAL;
+
+	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+	if (validrate != rate)
+		return -EINVAL;
+
+	sdrcrate = sdrc_ick_p->rate;
+	if (rate > clk->rate)
+		sdrcrate <<= ((rate / clk->rate) >> 1);
+	else
+		sdrcrate >>= ((clk->rate / rate) >> 1);
+
+	ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
+	if (ret)
+		return -EINVAL;
+
+	if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
+		pr_debug("clock: will unlock SDRC DLL\n");
+		unlock_dll = 1;
+	}
+
+	/*
+	 * XXX This only needs to be done when the CPU frequency changes
+	 */
+	_mpurate = arm_fck_p->rate / CYCLES_PER_MHZ;
+	c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
+	c += 1;  /* for safety */
+	c *= SDRC_MPURATE_LOOPS;
+	c >>= SDRC_MPURATE_SCALE;
+	if (c == 0)
+		c = 1;
+
+	pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
+		 validrate);
+	pr_debug("clock: SDRC CS0 timing params used:"
+		 " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+		 sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+		 sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
+	if (sdrc_cs1)
+		pr_debug("clock: SDRC CS1 timing params used: "
+		 " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+		 sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+		 sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
+
+	if (sdrc_cs1)
+		omap3_configure_core_dpll(
+				  new_div, unlock_dll, c, rate > clk->rate,
+				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
+				  sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+				  sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
+	else
+		omap3_configure_core_dpll(
+				  new_div, unlock_dll, c, rate > clk->rate,
+				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
+				  0, 0, 0, 0);
+
+	return 0;
+}
+

arch/arm/mach-omap2/clkt_clksel.c

@@ -0,0 +1,409 @@
+/*
+ * clkt_clksel.c - OMAP2/3/4 clksel clock functions
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX At some point these clksel clocks should be split into
+ * "divider" clocks and "mux" clocks to better match the hardware.
+ *
+ * XXX Currently these clocks are only used in the OMAP2/3/4 code, but
+ * many of the OMAP1 clocks should be convertible to use this
+ * mechanism.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+#include "cm-regbits-34xx.h"
+
+/* Private functions */
+
+/**
+ * _omap2_get_clksel_by_parent - return clksel struct for a given clk & parent
+ * @clk: OMAP struct clk ptr to inspect
+ * @src_clk: OMAP struct clk ptr of the parent clk to search for
+ *
+ * Scan the struct clksel array associated with the clock to find
+ * the element associated with the supplied parent clock address.
+ * Returns a pointer to the struct clksel on success or NULL on error.
+ */
+static const struct clksel *_omap2_get_clksel_by_parent(struct clk *clk,
+							struct clk *src_clk)
+{
+	const struct clksel *clks;
+
+	if (!clk->clksel)
+		return NULL;
+
+	for (clks = clk->clksel; clks->parent; clks++) {
+		if (clks->parent == src_clk)
+			break; /* Found the requested parent */
+	}
+
+	if (!clks->parent) {
+		printk(KERN_ERR "clock: Could not find parent clock %s in "
+		       "clksel array of clock %s\n", src_clk->name,
+		       clk->name);
+		return NULL;
+	}
+
+	return clks;
+}
+
+/*
+ * Converts encoded control register address into a full address
+ * On error, the return value (parent_div) will be 0.
+ */
+static u32 _omap2_clksel_get_src_field(struct clk *src_clk, struct clk *clk,
+				       u32 *field_val)
+{
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
+
+	clks = _omap2_get_clksel_by_parent(clk, src_clk);
+	if (!clks)
+		return 0;
+
+	for (clkr = clks->rates; clkr->div; clkr++) {
+		if (clkr->flags & cpu_mask && clkr->flags & DEFAULT_RATE)
+			break; /* Found the default rate for this platform */
+	}
+
+	if (!clkr->div) {
+		printk(KERN_ERR "clock: Could not find default rate for "
+		       "clock %s parent %s\n", clk->name,
+		       src_clk->parent->name);
+		return 0;
+	}
+
+	/* Should never happen.  Add a clksel mask to the struct clk. */
+	WARN_ON(clk->clksel_mask == 0);
+
+	*field_val = clkr->val;
+
+	return clkr->div;
+}
+
+
+/* Public functions */
+
+/**
+ * omap2_init_clksel_parent - set a clksel clk's parent field from the hardware
+ * @clk: OMAP clock struct ptr to use
+ *
+ * Given a pointer to a source-selectable struct clk, read the hardware
+ * register and determine what its parent is currently set to.  Update the
+ * clk->parent field with the appropriate clk ptr.
+ */
+void omap2_init_clksel_parent(struct clk *clk)
+{
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
+	u32 r, found = 0;
+
+	if (!clk->clksel)
+		return;
+
+	r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
+	r >>= __ffs(clk->clksel_mask);
+
+	for (clks = clk->clksel; clks->parent && !found; clks++) {
+		for (clkr = clks->rates; clkr->div && !found; clkr++) {
+			if ((clkr->flags & cpu_mask) && (clkr->val == r)) {
+				if (clk->parent != clks->parent) {
+					pr_debug("clock: inited %s parent "
+						 "to %s (was %s)\n",
+						 clk->name, clks->parent->name,
+						 ((clk->parent) ?
+						  clk->parent->name : "NULL"));
+					clk_reparent(clk, clks->parent);
+				};
+				found = 1;
+			}
+		}
+	}
+
+	if (!found)
+		printk(KERN_ERR "clock: init parent: could not find "
+		       "regval %0x for clock %s\n", r,  clk->name);
+
+	return;
+}
+
+/*
+ * Used for clocks that are part of CLKSEL_xyz governed clocks.
+ * REVISIT: Maybe change to use clk->enable() functions like on omap1?
+ */
+unsigned long omap2_clksel_recalc(struct clk *clk)
+{
+	unsigned long rate;
+	u32 div = 0;
+
+	pr_debug("clock: recalc'ing clksel clk %s\n", clk->name);
+
+	div = omap2_clksel_get_divisor(clk);
+	if (div == 0)
+		return clk->rate;
+
+	rate = clk->parent->rate / div;
+
+	pr_debug("clock: new clock rate is %ld (div %d)\n", rate, div);
+
+	return rate;
+}
+
+/**
+ * omap2_clksel_round_rate_div - find divisor for the given clock and rate
+ * @clk: OMAP struct clk to use
+ * @target_rate: desired clock rate
+ * @new_div: ptr to where we should store the divisor
+ *
+ * Finds 'best' divider value in an array based on the source and target
+ * rates.  The divider array must be sorted with smallest divider first.
+ * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
+ * they are only settable as part of virtual_prcm set.
+ *
+ * Returns the rounded clock rate or returns 0xffffffff on error.
+ */
+u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
+				u32 *new_div)
+{
+	unsigned long test_rate;
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
+	u32 last_div = 0;
+
+	pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
+		 clk->name, target_rate);
+
+	*new_div = 1;
+
+	clks = _omap2_get_clksel_by_parent(clk, clk->parent);
+	if (!clks)
+		return ~0;
+
+	for (clkr = clks->rates; clkr->div; clkr++) {
+		if (!(clkr->flags & cpu_mask))
+			continue;
+
+		/* Sanity check */
+		if (clkr->div <= last_div)
+			pr_err("clock: clksel_rate table not sorted "
+			       "for clock %s", clk->name);
+
+		last_div = clkr->div;
+
+		test_rate = clk->parent->rate / clkr->div;
+
+		if (test_rate <= target_rate)
+			break; /* found it */
+	}
+
+	if (!clkr->div) {
+		pr_err("clock: Could not find divisor for target "
+		       "rate %ld for clock %s parent %s\n", target_rate,
+		       clk->name, clk->parent->name);
+		return ~0;
+	}
+
+	*new_div = clkr->div;
+
+	pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
+		 (clk->parent->rate / clkr->div));
+
+	return clk->parent->rate / clkr->div;
+}
+
+/**
+ * omap2_clksel_round_rate - find rounded rate for the given clock and rate
+ * @clk: OMAP struct clk to use
+ * @target_rate: desired clock rate
+ *
+ * Compatibility wrapper for OMAP clock framework
+ * Finds best target rate based on the source clock and possible dividers.
+ * rates. The divider array must be sorted with smallest divider first.
+ * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
+ * they are only settable as part of virtual_prcm set.
+ *
+ * Returns the rounded clock rate or returns 0xffffffff on error.
+ */
+long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate)
+{
+	u32 new_div;
+
+	return omap2_clksel_round_rate_div(clk, target_rate, &new_div);
+}
+
+
+/* Given a clock and a rate apply a clock specific rounding function */
+long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	if (clk->round_rate)
+		return clk->round_rate(clk, rate);
+
+	return clk->rate;
+}
+
+/**
+ * omap2_clksel_to_divisor() - turn clksel field value into integer divider
+ * @clk: OMAP struct clk to use
+ * @field_val: register field value to find
+ *
+ * Given a struct clk of a rate-selectable clksel clock, and a register field
+ * value to search for, find the corresponding clock divisor.  The register
+ * field value should be pre-masked and shifted down so the LSB is at bit 0
+ * before calling.  Returns 0 on error
+ */
+u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val)
+{
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
+
+	clks = _omap2_get_clksel_by_parent(clk, clk->parent);
+	if (!clks)
+		return 0;
+
+	for (clkr = clks->rates; clkr->div; clkr++) {
+		if ((clkr->flags & cpu_mask) && (clkr->val == field_val))
+			break;
+	}
+
+	if (!clkr->div) {
+		printk(KERN_ERR "clock: Could not find fieldval %d for "
+		       "clock %s parent %s\n", field_val, clk->name,
+		       clk->parent->name);
+		return 0;
+	}
+
+	return clkr->div;
+}
+
+/**
+ * omap2_divisor_to_clksel() - turn clksel integer divisor into a field value
+ * @clk: OMAP struct clk to use
+ * @div: integer divisor to search for
+ *
+ * Given a struct clk of a rate-selectable clksel clock, and a clock divisor,
+ * find the corresponding register field value.  The return register value is
+ * the value before left-shifting.  Returns ~0 on error
+ */
+u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
+{
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
+
+	/* should never happen */
+	WARN_ON(div == 0);
+
+	clks = _omap2_get_clksel_by_parent(clk, clk->parent);
+	if (!clks)
+		return ~0;
+
+	for (clkr = clks->rates; clkr->div; clkr++) {
+		if ((clkr->flags & cpu_mask) && (clkr->div == div))
+			break;
+	}
+
+	if (!clkr->div) {
+		printk(KERN_ERR "clock: Could not find divisor %d for "
+		       "clock %s parent %s\n", div, clk->name,
+		       clk->parent->name);
+		return ~0;
+	}
+
+	return clkr->val;
+}
+
+/**
+ * omap2_clksel_get_divisor - get current divider applied to parent clock.
+ * @clk: OMAP struct clk to use.
+ *
+ * Returns the integer divisor upon success or 0 on error.
+ */
+u32 omap2_clksel_get_divisor(struct clk *clk)
+{
+	u32 v;
+
+	if (!clk->clksel_mask)
+		return 0;
+
+	v = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
+	v >>= __ffs(clk->clksel_mask);
+
+	return omap2_clksel_to_divisor(clk, v);
+}
+
+int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 v, field_val, validrate, new_div = 0;
+
+	if (!clk->clksel_mask)
+		return -EINVAL;
+
+	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+	if (validrate != rate)
+		return -EINVAL;
+
+	field_val = omap2_divisor_to_clksel(clk, new_div);
+	if (field_val == ~0)
+		return -EINVAL;
+
+	v = __raw_readl(clk->clksel_reg);
+	v &= ~clk->clksel_mask;
+	v |= field_val << __ffs(clk->clksel_mask);
+	__raw_writel(v, clk->clksel_reg);
+	v = __raw_readl(clk->clksel_reg); /* OCP barrier */
+
+	clk->rate = clk->parent->rate / new_div;
+
+	return 0;
+}
+
+int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent)
+{
+	u32 field_val, v, parent_div;
+
+	if (!clk->clksel)
+		return -EINVAL;
+
+	parent_div = _omap2_clksel_get_src_field(new_parent, clk, &field_val);
+	if (!parent_div)
+		return -EINVAL;
+
+	/* Set new source value (previous dividers if any in effect) */
+	v = __raw_readl(clk->clksel_reg);
+	v &= ~clk->clksel_mask;
+	v |= field_val << __ffs(clk->clksel_mask);
+	__raw_writel(v, clk->clksel_reg);
+	v = __raw_readl(clk->clksel_reg);    /* OCP barrier */
+
+	clk_reparent(clk, new_parent);
+
+	/* CLKSEL clocks follow their parents' rates, divided by a divisor */
+	clk->rate = new_parent->rate;
+
+	if (parent_div > 0)
+		clk->rate /= parent_div;
+
+	pr_debug("clock: set parent of %s to %s (new rate %ld)\n",
+		 clk->name, clk->parent->name, clk->rate);
+
+	return 0;
+}

arch/arm/mach-omap2/clkt_dpll.c

@@ -0,0 +1,386 @@
+/*
+ * OMAP2/3/4 DPLL clock functions
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/div64.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+#include "cm-regbits-34xx.h"
+
+/* DPLL rate rounding: minimum DPLL multiplier, divider values */
+#define DPLL_MIN_MULTIPLIER		2
+#define DPLL_MIN_DIVIDER		1
+
+/* Possible error results from _dpll_test_mult */
+#define DPLL_MULT_UNDERFLOW		-1
+
+/*
+ * Scale factor to mitigate roundoff errors in DPLL rate rounding.
+ * The higher the scale factor, the greater the risk of arithmetic overflow,
+ * but the closer the rounded rate to the target rate.  DPLL_SCALE_FACTOR
+ * must be a power of DPLL_SCALE_BASE.
+ */
+#define DPLL_SCALE_FACTOR		64
+#define DPLL_SCALE_BASE			2
+#define DPLL_ROUNDING_VAL		((DPLL_SCALE_BASE / 2) * \
+					 (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
+
+/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
+#define DPLL_FINT_BAND1_MIN		750000
+#define DPLL_FINT_BAND1_MAX		2100000
+#define DPLL_FINT_BAND2_MIN		7500000
+#define DPLL_FINT_BAND2_MAX		21000000
+
+/* _dpll_test_fint() return codes */
+#define DPLL_FINT_UNDERFLOW		-1
+#define DPLL_FINT_INVALID		-2
+
+/* Private functions */
+
+/*
+ * _dpll_test_fint - test whether an Fint value is valid for the DPLL
+ * @clk: DPLL struct clk to test
+ * @n: divider value (N) to test
+ *
+ * Tests whether a particular divider @n will result in a valid DPLL
+ * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter
+ * Correction".  Returns 0 if OK, -1 if the enclosing loop can terminate
+ * (assuming that it is counting N upwards), or -2 if the enclosing loop
+ * should skip to the next iteration (again assuming N is increasing).
+ */
+static int _dpll_test_fint(struct clk *clk, u8 n)
+{
+	struct dpll_data *dd;
+	long fint;
+	int ret = 0;
+
+	dd = clk->dpll_data;
+
+	/* DPLL divider must result in a valid jitter correction val */
+	fint = clk->parent->rate / (n + 1);
+	if (fint < DPLL_FINT_BAND1_MIN) {
+
+		pr_debug("rejecting n=%d due to Fint failure, "
+			 "lowering max_divider\n", n);
+		dd->max_divider = n;
+		ret = DPLL_FINT_UNDERFLOW;
+
+	} else if (fint > DPLL_FINT_BAND1_MAX &&
+		   fint < DPLL_FINT_BAND2_MIN) {
+
+		pr_debug("rejecting n=%d due to Fint failure\n", n);
+		ret = DPLL_FINT_INVALID;
+
+	} else if (fint > DPLL_FINT_BAND2_MAX) {
+
+		pr_debug("rejecting n=%d due to Fint failure, "
+			 "boosting min_divider\n", n);
+		dd->min_divider = n;
+		ret = DPLL_FINT_INVALID;
+
+	}
+
+	return ret;
+}
+
+static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
+					    unsigned int m, unsigned int n)
+{
+	unsigned long long num;
+
+	num = (unsigned long long)parent_rate * m;
+	do_div(num, n);
+	return num;
+}
+
+/*
+ * _dpll_test_mult - test a DPLL multiplier value
+ * @m: pointer to the DPLL m (multiplier) value under test
+ * @n: current DPLL n (divider) value under test
+ * @new_rate: pointer to storage for the resulting rounded rate
+ * @target_rate: the desired DPLL rate
+ * @parent_rate: the DPLL's parent clock rate
+ *
+ * This code tests a DPLL multiplier value, ensuring that the
+ * resulting rate will not be higher than the target_rate, and that
+ * the multiplier value itself is valid for the DPLL.  Initially, the
+ * integer pointed to by the m argument should be prescaled by
+ * multiplying by DPLL_SCALE_FACTOR.  The code will replace this with
+ * a non-scaled m upon return.  This non-scaled m will result in a
+ * new_rate as close as possible to target_rate (but not greater than
+ * target_rate) given the current (parent_rate, n, prescaled m)
+ * triple. Returns DPLL_MULT_UNDERFLOW in the event that the
+ * non-scaled m attempted to underflow, which can allow the calling
+ * function to bail out early; or 0 upon success.
+ */
+static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
+			   unsigned long target_rate,
+			   unsigned long parent_rate)
+{
+	int r = 0, carry = 0;
+
+	/* Unscale m and round if necessary */
+	if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
+		carry = 1;
+	*m = (*m / DPLL_SCALE_FACTOR) + carry;
+
+	/*
+	 * The new rate must be <= the target rate to avoid programming
+	 * a rate that is impossible for the hardware to handle
+	 */
+	*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+	if (*new_rate > target_rate) {
+		(*m)--;
+		*new_rate = 0;
+	}
+
+	/* Guard against m underflow */
+	if (*m < DPLL_MIN_MULTIPLIER) {
+		*m = DPLL_MIN_MULTIPLIER;
+		*new_rate = 0;
+		r = DPLL_MULT_UNDERFLOW;
+	}
+
+	if (*new_rate == 0)
+		*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+
+	return r;
+}
+
+/* Public functions */
+
+void omap2_init_dpll_parent(struct clk *clk)
+{
+	u32 v;
+	struct dpll_data *dd;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return;
+
+	/* Return bypass rate if DPLL is bypassed */
+	v = __raw_readl(dd->control_reg);
+	v &= dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+
+	/* Reparent in case the dpll is in bypass */
+	if (cpu_is_omap24xx()) {
+		if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP2XXX_EN_DPLL_FRBYPASS)
+			clk_reparent(clk, dd->clk_bypass);
+	} else if (cpu_is_omap34xx()) {
+		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
+			clk_reparent(clk, dd->clk_bypass);
+	} else if (cpu_is_omap44xx()) {
+		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
+		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
+			clk_reparent(clk, dd->clk_bypass);
+	}
+	return;
+}
+
+/**
+ * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
+ * @clk: struct clk * of a DPLL
+ *
+ * DPLLs can be locked or bypassed - basically, enabled or disabled.
+ * When locked, the DPLL output depends on the M and N values.  When
+ * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
+ * or sys_clk.  Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
+ * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
+ * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
+ * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
+ * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
+ * if the clock @clk is not a DPLL.
+ */
+u32 omap2_get_dpll_rate(struct clk *clk)
+{
+	long long dpll_clk;
+	u32 dpll_mult, dpll_div, v;
+	struct dpll_data *dd;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return 0;
+
+	/* Return bypass rate if DPLL is bypassed */
+	v = __raw_readl(dd->control_reg);
+	v &= dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+
+	if (cpu_is_omap24xx()) {
+		if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP2XXX_EN_DPLL_FRBYPASS)
+			return dd->clk_bypass->rate;
+	} else if (cpu_is_omap34xx()) {
+		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
+			return dd->clk_bypass->rate;
+	} else if (cpu_is_omap44xx()) {
+		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
+		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
+			return dd->clk_bypass->rate;
+	}
+
+	v = __raw_readl(dd->mult_div1_reg);
+	dpll_mult = v & dd->mult_mask;
+	dpll_mult >>= __ffs(dd->mult_mask);
+	dpll_div = v & dd->div1_mask;
+	dpll_div >>= __ffs(dd->div1_mask);
+
+	dpll_clk = (long long)dd->clk_ref->rate * dpll_mult;
+	do_div(dpll_clk, dpll_div + 1);
+
+	return dpll_clk;
+}
+
+/* DPLL rate rounding code */
+
+/**
+ * omap2_dpll_set_rate_tolerance: set the error tolerance during rate rounding
+ * @clk: struct clk * of the DPLL
+ * @tolerance: maximum rate error tolerance
+ *
+ * Set the maximum DPLL rate error tolerance for the rate rounding
+ * algorithm.  The rate tolerance is an attempt to balance DPLL power
+ * saving (the least divider value "n") vs. rate fidelity (the least
+ * difference between the desired DPLL target rate and the rounded
+ * rate out of the algorithm).  So, increasing the tolerance is likely
+ * to decrease DPLL power consumption and increase DPLL rate error.
+ * Returns -EINVAL if provided a null clock ptr or a clk that is not a
+ * DPLL; or 0 upon success.
+ */
+int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance)
+{
+	if (!clk || !clk->dpll_data)
+		return -EINVAL;
+
+	clk->dpll_data->rate_tolerance = tolerance;
+
+	return 0;
+}
+
+/**
+ * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
+ * @clk: struct clk * for a DPLL
+ * @target_rate: desired DPLL clock rate
+ *
+ * Given a DPLL, a desired target rate, and a rate tolerance, round
+ * the target rate to a possible, programmable rate for this DPLL.
+ * Rate tolerance is assumed to be set by the caller before this
+ * function is called.  Attempts to select the minimum possible n
+ * within the tolerance to reduce power consumption.  Stores the
+ * computed (m, n) in the DPLL's dpll_data structure so set_rate()
+ * will not need to call this (expensive) function again.  Returns ~0
+ * if the target rate cannot be rounded, either because the rate is
+ * too low or because the rate tolerance is set too tightly; or the
+ * rounded rate upon success.
+ */
+long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
+{
+	int m, n, r, e, scaled_max_m;
+	unsigned long scaled_rt_rp, new_rate;
+	int min_e = -1, min_e_m = -1, min_e_n = -1;
+	struct dpll_data *dd;
+
+	if (!clk || !clk->dpll_data)
+		return ~0;
+
+	dd = clk->dpll_data;
+
+	pr_debug("clock: starting DPLL round_rate for clock %s, target rate "
+		 "%ld\n", clk->name, target_rate);
+
+	scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR);
+	scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
+
+	dd->last_rounded_rate = 0;
+
+	for (n = dd->min_divider; n <= dd->max_divider; n++) {
+
+		/* Is the (input clk, divider) pair valid for the DPLL? */
+		r = _dpll_test_fint(clk, n);
+		if (r == DPLL_FINT_UNDERFLOW)
+			break;
+		else if (r == DPLL_FINT_INVALID)
+			continue;
+
+		/* Compute the scaled DPLL multiplier, based on the divider */
+		m = scaled_rt_rp * n;
+
+		/*
+		 * Since we're counting n up, a m overflow means we
+		 * can bail out completely (since as n increases in
+		 * the next iteration, there's no way that m can
+		 * increase beyond the current m)
+		 */
+		if (m > scaled_max_m)
+			break;
+
+		r = _dpll_test_mult(&m, n, &new_rate, target_rate,
+				    dd->clk_ref->rate);
+
+		/* m can't be set low enough for this n - try with a larger n */
+		if (r == DPLL_MULT_UNDERFLOW)
+			continue;
+
+		e = target_rate - new_rate;
+		pr_debug("clock: n = %d: m = %d: rate error is %d "
+			 "(new_rate = %ld)\n", n, m, e, new_rate);
+
+		if (min_e == -1 ||
+		    min_e >= (int)(abs(e) - dd->rate_tolerance)) {
+			min_e = e;
+			min_e_m = m;
+			min_e_n = n;
+
+			pr_debug("clock: found new least error %d\n", min_e);
+
+			/* We found good settings -- bail out now */
+			if (min_e <= dd->rate_tolerance)
+				break;
+		}
+	}
+
+	if (min_e < 0) {
+		pr_debug("clock: error: target rate or tolerance too low\n");
+		return ~0;
+	}
+
+	dd->last_rounded_m = min_e_m;
+	dd->last_rounded_n = min_e_n;
+	dd->last_rounded_rate = _dpll_compute_new_rate(dd->clk_ref->rate,
+						       min_e_m,  min_e_n);
+
+	pr_debug("clock: final least error: e = %d, m = %d, n = %d\n",
+		 min_e, min_e_m, min_e_n);
+	pr_debug("clock: final rate: %ld  (target rate: %ld)\n",
+		 dd->last_rounded_rate, target_rate);
+
+	return dd->last_rounded_rate;
+}
+

arch/arm/mach-omap2/clock.c

@@ -2,7 +2,7 @@
  *  linux/arch/arm/mach-omap2/clock.c
  *
  *  Copyright (C) 2005-2008 Texas Instruments, Inc.
- *  Copyright (C) 2004-2008 Nokia Corporation
+ *  Copyright (C) 2004-2010 Nokia Corporation
  *
  *  Contacts:
  *  Richard Woodruff <r-woodruff2@ti.com>
@@ -14,11 +14,10 @@
  */
 #undef DEBUG
 
-#include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/device.h>
 #include <linux/list.h>
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/io.h>
@@ -28,10 +27,7 @@
 #include <plat/clockdomain.h>
 #include <plat/cpu.h>
 #include <plat/prcm.h>
-#include <asm/div64.h>
 
-#include <plat/sdrc.h>
-#include "sdrc.h"
 #include "clock.h"
 #include "prm.h"
 #include "prm-regbits-24xx.h"
@@ -39,140 +35,44 @@
 #include "cm-regbits-24xx.h"
 #include "cm-regbits-34xx.h"
 
-/* DPLL rate rounding: minimum DPLL multiplier, divider values */
-#define DPLL_MIN_MULTIPLIER		1
-#define DPLL_MIN_DIVIDER		1
-
-/* Possible error results from _dpll_test_mult */
-#define DPLL_MULT_UNDERFLOW		-1
+u8 cpu_mask;
 
 /*
- * Scale factor to mitigate roundoff errors in DPLL rate rounding.
- * The higher the scale factor, the greater the risk of arithmetic overflow,
- * but the closer the rounded rate to the target rate.  DPLL_SCALE_FACTOR
- * must be a power of DPLL_SCALE_BASE.
+ * OMAP2+ specific clock functions
  */
-#define DPLL_SCALE_FACTOR		64
-#define DPLL_SCALE_BASE			2
-#define DPLL_ROUNDING_VAL		((DPLL_SCALE_BASE / 2) * \
-					 (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
-
-/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
-#define DPLL_FINT_BAND1_MIN		750000
-#define DPLL_FINT_BAND1_MAX		2100000
-#define DPLL_FINT_BAND2_MIN		7500000
-#define DPLL_FINT_BAND2_MAX		21000000
-
-/* _dpll_test_fint() return codes */
-#define DPLL_FINT_UNDERFLOW		-1
-#define DPLL_FINT_INVALID		-2
-
-u8 cpu_mask;
-
-/*-------------------------------------------------------------------------
- * OMAP2/3/4 specific clock functions
- *-------------------------------------------------------------------------*/
-
-void omap2_init_dpll_parent(struct clk *clk)
-{
-	u32 v;
-	struct dpll_data *dd;
-
-	dd = clk->dpll_data;
-	if (!dd)
-		return;
 
-	/* Return bypass rate if DPLL is bypassed */
-	v = __raw_readl(dd->control_reg);
-	v &= dd->enable_mask;
-	v >>= __ffs(dd->enable_mask);
-
-	/* Reparent in case the dpll is in bypass */
-	if (cpu_is_omap24xx()) {
-		if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
-		    v == OMAP2XXX_EN_DPLL_FRBYPASS)
-			clk_reparent(clk, dd->clk_bypass);
-	} else if (cpu_is_omap34xx()) {
-		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
-		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
-			clk_reparent(clk, dd->clk_bypass);
-	} else if (cpu_is_omap44xx()) {
-		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
-		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
-		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
-			clk_reparent(clk, dd->clk_bypass);
-	}
-	return;
-}
+/* Private functions */
 
 /**
- * _omap2xxx_clk_commit - commit clock parent/rate changes in hardware
- * @clk: struct clk *
- *
- * If @clk has the DELAYED_APP flag set, meaning that parent/rate changes
- * don't take effect until the VALID_CONFIG bit is written, write the
- * VALID_CONFIG bit and wait for the write to complete.  No return value.
- */
-static void _omap2xxx_clk_commit(struct clk *clk)
-{
-	if (!cpu_is_omap24xx())
-		return;
-
-	if (!(clk->flags & DELAYED_APP))
-		return;
-
-	prm_write_mod_reg(OMAP24XX_VALID_CONFIG, OMAP24XX_GR_MOD,
-		OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
-	/* OCP barrier */
-	prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
-}
-
-/*
- * _dpll_test_fint - test whether an Fint value is valid for the DPLL
- * @clk: DPLL struct clk to test
- * @n: divider value (N) to test
+ * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE
+ * @clk: struct clk * belonging to the module
  *
- * Tests whether a particular divider @n will result in a valid DPLL
- * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter
- * Correction".  Returns 0 if OK, -1 if the enclosing loop can terminate
- * (assuming that it is counting N upwards), or -2 if the enclosing loop
- * should skip to the next iteration (again assuming N is increasing).
+ * If the necessary clocks for the OMAP hardware IP block that
+ * corresponds to clock @clk are enabled, then wait for the module to
+ * indicate readiness (i.e., to leave IDLE).  This code does not
+ * belong in the clock code and will be moved in the medium term to
+ * module-dependent code.  No return value.
  */
-static int _dpll_test_fint(struct clk *clk, u8 n)
+static void _omap2_module_wait_ready(struct clk *clk)
 {
-	struct dpll_data *dd;
-	long fint;
-	int ret = 0;
-
-	dd = clk->dpll_data;
-
-	/* DPLL divider must result in a valid jitter correction val */
-	fint = clk->parent->rate / (n + 1);
-	if (fint < DPLL_FINT_BAND1_MIN) {
-
-		pr_debug("rejecting n=%d due to Fint failure, "
-			 "lowering max_divider\n", n);
-		dd->max_divider = n;
-		ret = DPLL_FINT_UNDERFLOW;
-
-	} else if (fint > DPLL_FINT_BAND1_MAX &&
-		   fint < DPLL_FINT_BAND2_MIN) {
-
-		pr_debug("rejecting n=%d due to Fint failure\n", n);
-		ret = DPLL_FINT_INVALID;
-
-	} else if (fint > DPLL_FINT_BAND2_MAX) {
-
-		pr_debug("rejecting n=%d due to Fint failure, "
-			 "boosting min_divider\n", n);
-		dd->min_divider = n;
-		ret = DPLL_FINT_INVALID;
+	void __iomem *companion_reg, *idlest_reg;
+	u8 other_bit, idlest_bit, idlest_val;
 
+	/* Not all modules have multiple clocks that their IDLEST depends on */
+	if (clk->ops->find_companion) {
+		clk->ops->find_companion(clk, &companion_reg, &other_bit);
+		if (!(__raw_readl(companion_reg) & (1 << other_bit)))
+			return;
 	}
 
-	return ret;
+	clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
+
+	omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), idlest_val,
+			     clk->name);
 }
 
+/* Public functions */
+
 /**
  * omap2_init_clk_clkdm - look up a clockdomain name, store pointer in clk
  * @clk: OMAP clock struct ptr to use
@@ -181,7 +81,6 @@ static int _dpll_test_fint(struct clk *clk, u8 n)
  * clockdomain pointer, and save it into the struct clk.  Intended to be
  * called during clk_register().  No return value.
  */
-#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */
 void omap2_init_clk_clkdm(struct clk *clk)
 {
 	struct clockdomain *clkdm;
@@ -199,117 +98,6 @@ void omap2_init_clk_clkdm(struct clk *clk)
 			 "clkdm %s\n", clk->name, clk->clkdm_name);
 	}
 }
-#endif
-
-/**
- * omap2_init_clksel_parent - set a clksel clk's parent field from the hardware
- * @clk: OMAP clock struct ptr to use
- *
- * Given a pointer to a source-selectable struct clk, read the hardware
- * register and determine what its parent is currently set to.  Update the
- * clk->parent field with the appropriate clk ptr.
- */
-void omap2_init_clksel_parent(struct clk *clk)
-{
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-	u32 r, found = 0;
-
-	if (!clk->clksel)
-		return;
-
-	r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
-	r >>= __ffs(clk->clksel_mask);
-
-	for (clks = clk->clksel; clks->parent && !found; clks++) {
-		for (clkr = clks->rates; clkr->div && !found; clkr++) {
-			if ((clkr->flags & cpu_mask) && (clkr->val == r)) {
-				if (clk->parent != clks->parent) {
-					pr_debug("clock: inited %s parent "
-						 "to %s (was %s)\n",
-						 clk->name, clks->parent->name,
-						 ((clk->parent) ?
-						  clk->parent->name : "NULL"));
-					clk_reparent(clk, clks->parent);
-				};
-				found = 1;
-			}
-		}
-	}
-
-	if (!found)
-		printk(KERN_ERR "clock: init parent: could not find "
-		       "regval %0x for clock %s\n", r,  clk->name);
-
-	return;
-}
-
-/**
- * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
- * @clk: struct clk * of a DPLL
- *
- * DPLLs can be locked or bypassed - basically, enabled or disabled.
- * When locked, the DPLL output depends on the M and N values.  When
- * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
- * or sys_clk.  Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
- * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
- * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
- * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
- * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
- * if the clock @clk is not a DPLL.
- */
-u32 omap2_get_dpll_rate(struct clk *clk)
-{
-	long long dpll_clk;
-	u32 dpll_mult, dpll_div, v;
-	struct dpll_data *dd;
-
-	dd = clk->dpll_data;
-	if (!dd)
-		return 0;
-
-	/* Return bypass rate if DPLL is bypassed */
-	v = __raw_readl(dd->control_reg);
-	v &= dd->enable_mask;
-	v >>= __ffs(dd->enable_mask);
-
-	if (cpu_is_omap24xx()) {
-		if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
-		    v == OMAP2XXX_EN_DPLL_FRBYPASS)
-			return dd->clk_bypass->rate;
-	} else if (cpu_is_omap34xx()) {
-		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
-		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
-			return dd->clk_bypass->rate;
-	} else if (cpu_is_omap44xx()) {
-		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
-		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
-		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
-			return dd->clk_bypass->rate;
-	}
-
-	v = __raw_readl(dd->mult_div1_reg);
-	dpll_mult = v & dd->mult_mask;
-	dpll_mult >>= __ffs(dd->mult_mask);
-	dpll_div = v & dd->div1_mask;
-	dpll_div >>= __ffs(dd->div1_mask);
-
-	dpll_clk = (long long)dd->clk_ref->rate * dpll_mult;
-	do_div(dpll_clk, dpll_div + 1);
-
-	return dpll_clk;
-}
-
-/*
- * Used for clocks that have the same value as the parent clock,
- * divided by some factor
- */
-unsigned long omap2_fixed_divisor_recalc(struct clk *clk)
-{
-	WARN_ON(!clk->fixed_div);
-
-	return clk->parent->rate / clk->fixed_div;
-}
 
 /**
  * omap2_clk_dflt_find_companion - find companion clock to @clk
@@ -351,7 +139,8 @@ void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
  * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
  * @clk: struct clk * to find IDLEST info for
  * @idlest_reg: void __iomem ** to return the CM_IDLEST va in
- * @idlest_bit: u8 ** to return the CM_IDLEST bit shift in
+ * @idlest_bit: u8 * to return the CM_IDLEST bit shift in
+ * @idlest_val: u8 * to return the idle status indicator
  *
  * Return the CM_IDLEST register address and bit shift corresponding
  * to the module that "owns" this clock.  This default code assumes
@@ -361,40 +150,26 @@ void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
  * CM_IDLEST2).  This is not true for all modules.  No return value.
  */
 void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
-				u8 *idlest_bit)
+				u8 *idlest_bit, u8 *idlest_val)
 {
 	u32 r;
 
 	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
 	*idlest_reg = (__force void __iomem *)r;
 	*idlest_bit = clk->enable_bit;
-}
 
-/**
- * omap2_module_wait_ready - wait for an OMAP module to leave IDLE
- * @clk: struct clk * belonging to the module
- *
- * If the necessary clocks for the OMAP hardware IP block that
- * corresponds to clock @clk are enabled, then wait for the module to
- * indicate readiness (i.e., to leave IDLE).  This code does not
- * belong in the clock code and will be moved in the medium term to
- * module-dependent code.  No return value.
- */
-static void omap2_module_wait_ready(struct clk *clk)
-{
-	void __iomem *companion_reg, *idlest_reg;
-	u8 other_bit, idlest_bit;
-
-	/* Not all modules have multiple clocks that their IDLEST depends on */
-	if (clk->ops->find_companion) {
-		clk->ops->find_companion(clk, &companion_reg, &other_bit);
-		if (!(__raw_readl(companion_reg) & (1 << other_bit)))
-			return;
-	}
-
-	clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit);
+	/*
+	 * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+	 * 34xx reverses this, just to keep us on our toes
+	 * AM35xx uses both, depending on the module.
+	 */
+	if (cpu_is_omap24xx())
+		*idlest_val = OMAP24XX_CM_IDLEST_VAL;
+	else if (cpu_is_omap34xx())
+		*idlest_val = OMAP34XX_CM_IDLEST_VAL;
+	else
+		BUG();
 
-	omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), clk->name);
 }
 
 int omap2_dflt_clk_enable(struct clk *clk)
@@ -416,7 +191,7 @@ int omap2_dflt_clk_enable(struct clk *clk)
 	v = __raw_readl(clk->enable_reg); /* OCP barrier */
 
 	if (clk->ops->find_idlest)
-		omap2_module_wait_ready(clk);
+		_omap2_module_wait_ready(clk);
 
 	return 0;
 }
@@ -456,337 +231,109 @@ const struct clkops clkops_omap2_dflt = {
 	.disable	= omap2_dflt_clk_disable,
 };
 
-/* Enables clock without considering parent dependencies or use count
- * REVISIT: Maybe change this to use clk->enable like on omap1?
+/**
+ * omap2_clk_disable - disable a clock, if the system is not using it
+ * @clk: struct clk * to disable
+ *
+ * Decrements the usecount on struct clk @clk.  If there are no users
+ * left, call the clkops-specific clock disable function to disable it
+ * in hardware.  If the clock is part of a clockdomain (which they all
+ * should be), request that the clockdomain be disabled.  (It too has
+ * a usecount, and so will not be disabled in the hardware until it no
+ * longer has any users.)  If the clock has a parent clock (most of
+ * them do), then call ourselves, recursing on the parent clock.  This
+ * can cause an entire branch of the clock tree to be powered off by
+ * simply disabling one clock.  Intended to be called with the clockfw_lock
+ * spinlock held.  No return value.
  */
-static int _omap2_clk_enable(struct clk *clk)
-{
-	return clk->ops->enable(clk);
-}
-
-/* Disables clock without considering parent dependencies or use count */
-static void _omap2_clk_disable(struct clk *clk)
-{
-	clk->ops->disable(clk);
-}
-
 void omap2_clk_disable(struct clk *clk)
 {
-	if (clk->usecount > 0 && !(--clk->usecount)) {
-		_omap2_clk_disable(clk);
-		if (clk->parent)
-			omap2_clk_disable(clk->parent);
-#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */
-		if (clk->clkdm)
-			omap2_clkdm_clk_disable(clk->clkdm, clk);
-#endif
-
+	if (clk->usecount == 0) {
+		WARN(1, "clock: %s: omap2_clk_disable() called, but usecount "
+		     "already 0?", clk->name);
+		return;
 	}
-}
 
-int omap2_clk_enable(struct clk *clk)
-{
-	int ret = 0;
+	pr_debug("clock: %s: decrementing usecount\n", clk->name);
 
-	if (clk->usecount++ == 0) {
-#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */
-		if (clk->clkdm)
-			omap2_clkdm_clk_enable(clk->clkdm, clk);
-#endif
+	clk->usecount--;
 
-		if (clk->parent) {
-			ret = omap2_clk_enable(clk->parent);
-			if (ret)
-				goto err;
-		}
+	if (clk->usecount > 0)
+		return;
 
-		ret = _omap2_clk_enable(clk);
-		if (ret) {
-			if (clk->parent)
-				omap2_clk_disable(clk->parent);
+	pr_debug("clock: %s: disabling in hardware\n", clk->name);
 
-			goto err;
-		}
-	}
-	return ret;
+	clk->ops->disable(clk);
 
-err:
-#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */
 	if (clk->clkdm)
 		omap2_clkdm_clk_disable(clk->clkdm, clk);
-#endif
-	clk->usecount--;
-	return ret;
-}
-
-/*
- * Used for clocks that are part of CLKSEL_xyz governed clocks.
- * REVISIT: Maybe change to use clk->enable() functions like on omap1?
- */
-unsigned long omap2_clksel_recalc(struct clk *clk)
-{
-	unsigned long rate;
-	u32 div = 0;
-
-	pr_debug("clock: recalc'ing clksel clk %s\n", clk->name);
-
-	div = omap2_clksel_get_divisor(clk);
-	if (div == 0)
-		return clk->rate;
-
-	rate = clk->parent->rate / div;
-
-	pr_debug("clock: new clock rate is %ld (div %d)\n", rate, div);
-
-	return rate;
-}
-
-/**
- * omap2_get_clksel_by_parent - return clksel struct for a given clk & parent
- * @clk: OMAP struct clk ptr to inspect
- * @src_clk: OMAP struct clk ptr of the parent clk to search for
- *
- * Scan the struct clksel array associated with the clock to find
- * the element associated with the supplied parent clock address.
- * Returns a pointer to the struct clksel on success or NULL on error.
- */
-static const struct clksel *omap2_get_clksel_by_parent(struct clk *clk,
-						       struct clk *src_clk)
-{
-	const struct clksel *clks;
-
-	if (!clk->clksel)
-		return NULL;
-
-	for (clks = clk->clksel; clks->parent; clks++) {
-		if (clks->parent == src_clk)
-			break; /* Found the requested parent */
-	}
-
-	if (!clks->parent) {
-		printk(KERN_ERR "clock: Could not find parent clock %s in "
-		       "clksel array of clock %s\n", src_clk->name,
-		       clk->name);
-		return NULL;
-	}
 
-	return clks;
+	if (clk->parent)
+		omap2_clk_disable(clk->parent);
 }
 
 /**
- * omap2_clksel_round_rate_div - find divisor for the given clock and rate
- * @clk: OMAP struct clk to use
- * @target_rate: desired clock rate
- * @new_div: ptr to where we should store the divisor
+ * omap2_clk_enable - request that the system enable a clock
+ * @clk: struct clk * to enable
  *
- * Finds 'best' divider value in an array based on the source and target
- * rates.  The divider array must be sorted with smallest divider first.
- * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
- * they are only settable as part of virtual_prcm set.
- *
- * Returns the rounded clock rate or returns 0xffffffff on error.
+ * Increments the usecount on struct clk @clk.  If there were no users
+ * previously, then recurse up the clock tree, enabling all of the
+ * clock's parents and all of the parent clockdomains, and finally,
+ * enabling @clk's clockdomain, and @clk itself.  Intended to be
+ * called with the clockfw_lock spinlock held.  Returns 0 upon success
+ * or a negative error code upon failure.
  */
-u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
-				u32 *new_div)
-{
-	unsigned long test_rate;
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-	u32 last_div = 0;
-
-	pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
-		 clk->name, target_rate);
-
-	*new_div = 1;
-
-	clks = omap2_get_clksel_by_parent(clk, clk->parent);
-	if (!clks)
-		return ~0;
-
-	for (clkr = clks->rates; clkr->div; clkr++) {
-		if (!(clkr->flags & cpu_mask))
-		    continue;
-
-		/* Sanity check */
-		if (clkr->div <= last_div)
-			pr_err("clock: clksel_rate table not sorted "
-			       "for clock %s", clk->name);
-
-		last_div = clkr->div;
-
-		test_rate = clk->parent->rate / clkr->div;
-
-		if (test_rate <= target_rate)
-			break; /* found it */
-	}
-
-	if (!clkr->div) {
-		pr_err("clock: Could not find divisor for target "
-		       "rate %ld for clock %s parent %s\n", target_rate,
-		       clk->name, clk->parent->name);
-		return ~0;
-	}
-
-	*new_div = clkr->div;
-
-	pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
-		 (clk->parent->rate / clkr->div));
-
-	return (clk->parent->rate / clkr->div);
-}
-
-/**
- * omap2_clksel_round_rate - find rounded rate for the given clock and rate
- * @clk: OMAP struct clk to use
- * @target_rate: desired clock rate
- *
- * Compatibility wrapper for OMAP clock framework
- * Finds best target rate based on the source clock and possible dividers.
- * rates. The divider array must be sorted with smallest divider first.
- * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
- * they are only settable as part of virtual_prcm set.
- *
- * Returns the rounded clock rate or returns 0xffffffff on error.
- */
-long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate)
-{
-	u32 new_div;
-
-	return omap2_clksel_round_rate_div(clk, target_rate, &new_div);
-}
-
-
-/* Given a clock and a rate apply a clock specific rounding function */
-long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
+int omap2_clk_enable(struct clk *clk)
 {
-	if (clk->round_rate)
-		return clk->round_rate(clk, rate);
+	int ret;
 
-	if (clk->flags & RATE_FIXED)
-		printk(KERN_ERR "clock: generic omap2_clk_round_rate called "
-		       "on fixed-rate clock %s\n", clk->name);
+	pr_debug("clock: %s: incrementing usecount\n", clk->name);
 
-	return clk->rate;
-}
-
-/**
- * omap2_clksel_to_divisor() - turn clksel field value into integer divider
- * @clk: OMAP struct clk to use
- * @field_val: register field value to find
- *
- * Given a struct clk of a rate-selectable clksel clock, and a register field
- * value to search for, find the corresponding clock divisor.  The register
- * field value should be pre-masked and shifted down so the LSB is at bit 0
- * before calling.  Returns 0 on error
- */
-u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val)
-{
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
+	clk->usecount++;
 
-	clks = omap2_get_clksel_by_parent(clk, clk->parent);
-	if (!clks)
+	if (clk->usecount > 1)
 		return 0;
 
-	for (clkr = clks->rates; clkr->div; clkr++) {
-		if ((clkr->flags & cpu_mask) && (clkr->val == field_val))
-			break;
-	}
+	pr_debug("clock: %s: enabling in hardware\n", clk->name);
 
-	if (!clkr->div) {
-		printk(KERN_ERR "clock: Could not find fieldval %d for "
-		       "clock %s parent %s\n", field_val, clk->name,
-		       clk->parent->name);
-		return 0;
+	if (clk->parent) {
+		ret = omap2_clk_enable(clk->parent);
+		if (ret) {
+			WARN(1, "clock: %s: could not enable parent %s: %d\n",
+			     clk->name, clk->parent->name, ret);
+			goto oce_err1;
+		}
 	}
 
-	return clkr->div;
-}
-
-/**
- * omap2_divisor_to_clksel() - turn clksel integer divisor into a field value
- * @clk: OMAP struct clk to use
- * @div: integer divisor to search for
- *
- * Given a struct clk of a rate-selectable clksel clock, and a clock divisor,
- * find the corresponding register field value.  The return register value is
- * the value before left-shifting.  Returns ~0 on error
- */
-u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
-{
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-
-	/* should never happen */
-	WARN_ON(div == 0);
-
-	clks = omap2_get_clksel_by_parent(clk, clk->parent);
-	if (!clks)
-		return ~0;
-
-	for (clkr = clks->rates; clkr->div; clkr++) {
-		if ((clkr->flags & cpu_mask) && (clkr->div == div))
-			break;
+	if (clk->clkdm) {
+		ret = omap2_clkdm_clk_enable(clk->clkdm, clk);
+		if (ret) {
+			WARN(1, "clock: %s: could not enable clockdomain %s: "
+			     "%d\n", clk->name, clk->clkdm->name, ret);
+			goto oce_err2;
+		}
 	}
 
-	if (!clkr->div) {
-		printk(KERN_ERR "clock: Could not find divisor %d for "
-		       "clock %s parent %s\n", div, clk->name,
-		       clk->parent->name);
-		return ~0;
+	ret = clk->ops->enable(clk);
+	if (ret) {
+		WARN(1, "clock: %s: could not enable: %d\n", clk->name, ret);
+		goto oce_err3;
 	}
 
-	return clkr->val;
-}
-
-/**
- * omap2_clksel_get_divisor - get current divider applied to parent clock.
- * @clk: OMAP struct clk to use.
- *
- * Returns the integer divisor upon success or 0 on error.
- */
-u32 omap2_clksel_get_divisor(struct clk *clk)
-{
-	u32 v;
-
-	if (!clk->clksel_mask)
-		return 0;
-
-	v = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
-	v >>= __ffs(clk->clksel_mask);
-
-	return omap2_clksel_to_divisor(clk, v);
-}
-
-int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 v, field_val, validrate, new_div = 0;
-
-	if (!clk->clksel_mask)
-		return -EINVAL;
-
-	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
-	if (validrate != rate)
-		return -EINVAL;
-
-	field_val = omap2_divisor_to_clksel(clk, new_div);
-	if (field_val == ~0)
-		return -EINVAL;
-
-	v = __raw_readl(clk->clksel_reg);
-	v &= ~clk->clksel_mask;
-	v |= field_val << __ffs(clk->clksel_mask);
-	__raw_writel(v, clk->clksel_reg);
-	v = __raw_readl(clk->clksel_reg); /* OCP barrier */
-
-	clk->rate = clk->parent->rate / new_div;
+	return 0;
 
-	_omap2xxx_clk_commit(clk);
+oce_err3:
+	if (clk->clkdm)
+		omap2_clkdm_clk_disable(clk->clkdm, clk);
+oce_err2:
+	if (clk->parent)
+		omap2_clk_disable(clk->parent);
+oce_err1:
+	clk->usecount--;
 
-	return 0;
+	return ret;
 }
 
-
 /* Set the clock rate for a clock source */
 int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 {
@@ -794,11 +341,6 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 
 	pr_debug("clock: set_rate for clock %s to rate %ld\n", clk->name, rate);
 
-	/* CONFIG_PARTICIPANT clocks are changed only in sets via the
-	   rate table mechanism, driven by mpu_speed  */
-	if (clk->flags & CONFIG_PARTICIPANT)
-		return -EINVAL;
-
 	/* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */
 	if (clk->set_rate)
 		ret = clk->set_rate(clk, rate);
@@ -806,289 +348,152 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 	return ret;
 }
 
-/*
- * Converts encoded control register address into a full address
- * On error, the return value (parent_div) will be 0.
- */
-static u32 _omap2_clksel_get_src_field(struct clk *src_clk, struct clk *clk,
-				       u32 *field_val)
-{
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-
-	clks = omap2_get_clksel_by_parent(clk, src_clk);
-	if (!clks)
-		return 0;
-
-	for (clkr = clks->rates; clkr->div; clkr++) {
-		if (clkr->flags & cpu_mask && clkr->flags & DEFAULT_RATE)
-			break; /* Found the default rate for this platform */
-	}
-
-	if (!clkr->div) {
-		printk(KERN_ERR "clock: Could not find default rate for "
-		       "clock %s parent %s\n", clk->name,
-		       src_clk->parent->name);
-		return 0;
-	}
-
-	/* Should never happen.  Add a clksel mask to the struct clk. */
-	WARN_ON(clk->clksel_mask == 0);
-
-	*field_val = clkr->val;
-
-	return clkr->div;
-}
-
 int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 {
-	u32 field_val, v, parent_div;
-
-	if (clk->flags & CONFIG_PARTICIPANT)
-		return -EINVAL;
-
 	if (!clk->clksel)
 		return -EINVAL;
 
-	parent_div = _omap2_clksel_get_src_field(new_parent, clk, &field_val);
-	if (!parent_div)
-		return -EINVAL;
-
-	/* Set new source value (previous dividers if any in effect) */
-	v = __raw_readl(clk->clksel_reg);
-	v &= ~clk->clksel_mask;
-	v |= field_val << __ffs(clk->clksel_mask);
-	__raw_writel(v, clk->clksel_reg);
-	v = __raw_readl(clk->clksel_reg);    /* OCP barrier */
-
-	_omap2xxx_clk_commit(clk);
-
-	clk_reparent(clk, new_parent);
-
-	/* CLKSEL clocks follow their parents' rates, divided by a divisor */
-	clk->rate = new_parent->rate;
-
-	if (parent_div > 0)
-		clk->rate /= parent_div;
-
-	pr_debug("clock: set parent of %s to %s (new rate %ld)\n",
-		 clk->name, clk->parent->name, clk->rate);
+	if (clk->parent == new_parent)
+		return 0;
 
-	return 0;
+	return omap2_clksel_set_parent(clk, new_parent);
 }
 
-/* DPLL rate rounding code */
+/* OMAP3/4 non-CORE DPLL clkops */
 
-/**
- * omap2_dpll_set_rate_tolerance: set the error tolerance during rate rounding
- * @clk: struct clk * of the DPLL
- * @tolerance: maximum rate error tolerance
- *
- * Set the maximum DPLL rate error tolerance for the rate rounding
- * algorithm.  The rate tolerance is an attempt to balance DPLL power
- * saving (the least divider value "n") vs. rate fidelity (the least
- * difference between the desired DPLL target rate and the rounded
- * rate out of the algorithm).  So, increasing the tolerance is likely
- * to decrease DPLL power consumption and increase DPLL rate error.
- * Returns -EINVAL if provided a null clock ptr or a clk that is not a
- * DPLL; or 0 upon success.
- */
-int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance)
-{
-	if (!clk || !clk->dpll_data)
-		return -EINVAL;
-
-	clk->dpll_data->rate_tolerance = tolerance;
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 
-	return 0;
-}
+const struct clkops clkops_omap3_noncore_dpll_ops = {
+	.enable		= omap3_noncore_dpll_enable,
+	.disable	= omap3_noncore_dpll_disable,
+};
 
-static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
-					    unsigned int m, unsigned int n)
-{
-	unsigned long long num;
+#endif
 
-	num = (unsigned long long)parent_rate * m;
-	do_div(num, n);
-	return num;
-}
 
 /*
- * _dpll_test_mult - test a DPLL multiplier value
- * @m: pointer to the DPLL m (multiplier) value under test
- * @n: current DPLL n (divider) value under test
- * @new_rate: pointer to storage for the resulting rounded rate
- * @target_rate: the desired DPLL rate
- * @parent_rate: the DPLL's parent clock rate
- *
- * This code tests a DPLL multiplier value, ensuring that the
- * resulting rate will not be higher than the target_rate, and that
- * the multiplier value itself is valid for the DPLL.  Initially, the
- * integer pointed to by the m argument should be prescaled by
- * multiplying by DPLL_SCALE_FACTOR.  The code will replace this with
- * a non-scaled m upon return.  This non-scaled m will result in a
- * new_rate as close as possible to target_rate (but not greater than
- * target_rate) given the current (parent_rate, n, prescaled m)
- * triple. Returns DPLL_MULT_UNDERFLOW in the event that the
- * non-scaled m attempted to underflow, which can allow the calling
- * function to bail out early; or 0 upon success.
+ * OMAP2+ clock reset and init functions
  */
-static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
-			   unsigned long target_rate,
-			   unsigned long parent_rate)
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+void omap2_clk_disable_unused(struct clk *clk)
 {
-	int r = 0, carry = 0;
+	u32 regval32, v;
 
-	/* Unscale m and round if necessary */
-	if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
-		carry = 1;
-	*m = (*m / DPLL_SCALE_FACTOR) + carry;
+	v = (clk->flags & INVERT_ENABLE) ? (1 << clk->enable_bit) : 0;
 
-	/*
-	 * The new rate must be <= the target rate to avoid programming
-	 * a rate that is impossible for the hardware to handle
-	 */
-	*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
-	if (*new_rate > target_rate) {
-		(*m)--;
-		*new_rate = 0;
-	}
+	regval32 = __raw_readl(clk->enable_reg);
+	if ((regval32 & (1 << clk->enable_bit)) == v)
+		return;
 
-	/* Guard against m underflow */
-	if (*m < DPLL_MIN_MULTIPLIER) {
-		*m = DPLL_MIN_MULTIPLIER;
-		*new_rate = 0;
-		r = DPLL_MULT_UNDERFLOW;
+	printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name);
+	if (cpu_is_omap34xx()) {
+		omap2_clk_enable(clk);
+		omap2_clk_disable(clk);
+	} else {
+		clk->ops->disable(clk);
 	}
-
-	if (*new_rate == 0)
-		*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
-
-	return r;
+	if (clk->clkdm != NULL)
+		pwrdm_clkdm_state_switch(clk->clkdm);
 }
+#endif
 
 /**
- * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
- * @clk: struct clk * for a DPLL
- * @target_rate: desired DPLL clock rate
+ * omap2_clk_switch_mpurate_at_boot - switch ARM MPU rate by boot-time argument
+ * @mpurate_ck_name: clk name of the clock to change rate
  *
- * Given a DPLL, a desired target rate, and a rate tolerance, round
- * the target rate to a possible, programmable rate for this DPLL.
- * Rate tolerance is assumed to be set by the caller before this
- * function is called.  Attempts to select the minimum possible n
- * within the tolerance to reduce power consumption.  Stores the
- * computed (m, n) in the DPLL's dpll_data structure so set_rate()
- * will not need to call this (expensive) function again.  Returns ~0
- * if the target rate cannot be rounded, either because the rate is
- * too low or because the rate tolerance is set too tightly; or the
- * rounded rate upon success.
+ * Change the ARM MPU clock rate to the rate specified on the command
+ * line, if one was specified.  @mpurate_ck_name should be
+ * "virt_prcm_set" on OMAP2xxx and "dpll1_ck" on OMAP34xx/OMAP36xx.
+ * XXX Does not handle voltage scaling - on OMAP2xxx this is currently
+ * handled by the virt_prcm_set clock, but this should be handled by
+ * the OPP layer.  XXX This is intended to be handled by the OPP layer
+ * code in the near future and should be removed from the clock code.
+ * Returns -EINVAL if 'mpurate' is zero or if clk_set_rate() rejects
+ * the rate, -ENOENT if the struct clk referred to by @mpurate_ck_name
+ * cannot be found, or 0 upon success.
  */
-long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
+int __init omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name)
 {
-	int m, n, r, e, scaled_max_m;
-	unsigned long scaled_rt_rp, new_rate;
-	int min_e = -1, min_e_m = -1, min_e_n = -1;
-	struct dpll_data *dd;
+	struct clk *mpurate_ck;
+	int r;
 
-	if (!clk || !clk->dpll_data)
-		return ~0;
-
-	dd = clk->dpll_data;
-
-	pr_debug("clock: starting DPLL round_rate for clock %s, target rate "
-		 "%ld\n", clk->name, target_rate);
-
-	scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR);
-	scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
-
-	dd->last_rounded_rate = 0;
-
-	for (n = dd->min_divider; n <= dd->max_divider; n++) {
-
-		/* Is the (input clk, divider) pair valid for the DPLL? */
-		r = _dpll_test_fint(clk, n);
-		if (r == DPLL_FINT_UNDERFLOW)
-			break;
-		else if (r == DPLL_FINT_INVALID)
-			continue;
-
-		/* Compute the scaled DPLL multiplier, based on the divider */
-		m = scaled_rt_rp * n;
-
-		/*
-		 * Since we're counting n up, a m overflow means we
-		 * can bail out completely (since as n increases in
-		 * the next iteration, there's no way that m can
-		 * increase beyond the current m)
-		 */
-		if (m > scaled_max_m)
-			break;
-
-		r = _dpll_test_mult(&m, n, &new_rate, target_rate,
-				    dd->clk_ref->rate);
-
-		/* m can't be set low enough for this n - try with a larger n */
-		if (r == DPLL_MULT_UNDERFLOW)
-			continue;
-
-		e = target_rate - new_rate;
-		pr_debug("clock: n = %d: m = %d: rate error is %d "
-			 "(new_rate = %ld)\n", n, m, e, new_rate);
-
-		if (min_e == -1 ||
-		    min_e >= (int)(abs(e) - dd->rate_tolerance)) {
-			min_e = e;
-			min_e_m = m;
-			min_e_n = n;
-
-			pr_debug("clock: found new least error %d\n", min_e);
+	if (!mpurate)
+		return -EINVAL;
 
-			/* We found good settings -- bail out now */
-			if (min_e <= dd->rate_tolerance)
-				break;
-		}
-	}
+	mpurate_ck = clk_get(NULL, mpurate_ck_name);
+	if (WARN(IS_ERR(mpurate_ck), "Failed to get %s.\n", mpurate_ck_name))
+		return -ENOENT;
 
-	if (min_e < 0) {
-		pr_debug("clock: error: target rate or tolerance too low\n");
-		return ~0;
+	r = clk_set_rate(mpurate_ck, mpurate);
+	if (IS_ERR_VALUE(r)) {
+		WARN(1, "clock: %s: unable to set MPU rate to %d: %d\n",
+		     mpurate_ck->name, mpurate, r);
+		return -EINVAL;
 	}
 
-	dd->last_rounded_m = min_e_m;
-	dd->last_rounded_n = min_e_n;
-	dd->last_rounded_rate = _dpll_compute_new_rate(dd->clk_ref->rate,
-						       min_e_m,  min_e_n);
+	calibrate_delay();
+	recalculate_root_clocks();
 
-	pr_debug("clock: final least error: e = %d, m = %d, n = %d\n",
-		 min_e, min_e_m, min_e_n);
-	pr_debug("clock: final rate: %ld  (target rate: %ld)\n",
-		 dd->last_rounded_rate, target_rate);
+	clk_put(mpurate_ck);
 
-	return dd->last_rounded_rate;
+	return 0;
 }
 
-/*-------------------------------------------------------------------------
- * Omap2 clock reset and init functions
- *-------------------------------------------------------------------------*/
-
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-void omap2_clk_disable_unused(struct clk *clk)
+/**
+ * omap2_clk_print_new_rates - print summary of current clock tree rates
+ * @hfclkin_ck_name: clk name for the off-chip HF oscillator
+ * @core_ck_name: clk name for the on-chip CORE_CLK
+ * @mpu_ck_name: clk name for the ARM MPU clock
+ *
+ * Prints a short message to the console with the HFCLKIN oscillator
+ * rate, the rate of the CORE clock, and the rate of the ARM MPU clock.
+ * Called by the boot-time MPU rate switching code.   XXX This is intended
+ * to be handled by the OPP layer code in the near future and should be
+ * removed from the clock code.  No return value.
+ */
+void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
+				      const char *core_ck_name,
+				      const char *mpu_ck_name)
 {
-	u32 regval32, v;
+	struct clk *hfclkin_ck, *core_ck, *mpu_ck;
+	unsigned long hfclkin_rate;
 
-	v = (clk->flags & INVERT_ENABLE) ? (1 << clk->enable_bit) : 0;
+	mpu_ck = clk_get(NULL, mpu_ck_name);
+	if (WARN(IS_ERR(mpu_ck), "clock: failed to get %s.\n", mpu_ck_name))
+		return;
 
-	regval32 = __raw_readl(clk->enable_reg);
-	if ((regval32 & (1 << clk->enable_bit)) == v)
+	core_ck = clk_get(NULL, core_ck_name);
+	if (WARN(IS_ERR(core_ck), "clock: failed to get %s.\n", core_ck_name))
 		return;
 
-	printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name);
-	if (cpu_is_omap34xx()) {
-		omap2_clk_enable(clk);
-		omap2_clk_disable(clk);
-	} else
-		_omap2_clk_disable(clk);
-	if (clk->clkdm != NULL)
-		pwrdm_clkdm_state_switch(clk->clkdm);
-}
+	hfclkin_ck = clk_get(NULL, hfclkin_ck_name);
+	if (WARN(IS_ERR(hfclkin_ck), "Failed to get %s.\n", hfclkin_ck_name))
+		return;
+
+	hfclkin_rate = clk_get_rate(hfclkin_ck);
+
+	pr_info("Switched to new clocking rate (Crystal/Core/MPU): "
+		"%ld.%01ld/%ld/%ld MHz\n",
+		(hfclkin_rate / 1000000),
+		((hfclkin_rate / 100000) % 10),
+		(clk_get_rate(core_ck) / 1000000),
+		(clk_get_rate(mpu_ck) / 1000000));
+}
+
+/* Common data */
+
+struct clk_functions omap2_clk_functions = {
+	.clk_enable		= omap2_clk_enable,
+	.clk_disable		= omap2_clk_disable,
+	.clk_round_rate		= omap2_clk_round_rate,
+	.clk_set_rate		= omap2_clk_set_rate,
+	.clk_set_parent		= omap2_clk_set_parent,
+	.clk_disable_unused	= omap2_clk_disable_unused,
+#ifdef CONFIG_CPU_FREQ
+	/* These will be removed when the OPP code is integrated */
+	.clk_init_cpufreq_table	= omap2_clk_init_cpufreq_table,
+	.clk_exit_cpufreq_table	= omap2_clk_exit_cpufreq_table,
 #endif
+};
+

arch/arm/mach-omap2/clock.h

@@ -47,7 +47,10 @@
 #define DPLL_LOW_POWER_BYPASS	0x5
 #define DPLL_LOCKED		0x7
 
-int omap2_clk_init(void);
+/* DPLL Type and DCO Selection Flags */
+#define DPLL_J_TYPE		0x1
+#define DPLL_NO_DCO_SEL		0x2
+
 int omap2_clk_enable(struct clk *clk);
 void omap2_clk_disable(struct clk *clk);
 long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
@@ -78,23 +81,53 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 				u32 *new_div);
 u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val);
 u32 omap2_divisor_to_clksel(struct clk *clk, u32 div);
-unsigned long omap2_fixed_divisor_recalc(struct clk *clk);
 long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
 int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
+int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent);
 u32 omap2_get_dpll_rate(struct clk *clk);
 void omap2_init_dpll_parent(struct clk *clk);
 int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
-void omap2_clk_prepare_for_reboot(void);
+
+
+#ifdef CONFIG_ARCH_OMAP2
+void omap2xxx_clk_prepare_for_reboot(void);
+#else
+static inline void omap2xxx_clk_prepare_for_reboot(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+void omap3_clk_prepare_for_reboot(void);
+#else
+static inline void omap3_clk_prepare_for_reboot(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+void omap4_clk_prepare_for_reboot(void);
+#else
+static inline void omap4_clk_prepare_for_reboot(void)
+{
+}
+#endif
+
 int omap2_dflt_clk_enable(struct clk *clk);
 void omap2_dflt_clk_disable(struct clk *clk);
 void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
 				   u8 *other_bit);
 void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
-				u8 *idlest_bit);
+				u8 *idlest_bit, u8 *idlest_val);
+int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name);
+void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
+			       const char *core_ck_name,
+			       const char *mpu_ck_name);
 
 extern u8 cpu_mask;
 
 extern const struct clkops clkops_omap2_dflt_wait;
+extern const struct clkops clkops_dummy;
 extern const struct clkops clkops_omap2_dflt;
 
 extern struct clk_functions omap2_clk_functions;
@@ -104,5 +137,14 @@ extern const struct clksel_rate gpt_32k_rates[];
 extern const struct clksel_rate gpt_sys_rates[];
 extern const struct clksel_rate gfx_l3_rates[];
 
+#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_CPU_FREQ)
+extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
+extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
+#else
+#define omap2_clk_init_cpufreq_table	0
+#define omap2_clk_exit_cpufreq_table	0
+#endif
+
+extern const struct clkops clkops_omap3_noncore_dpll_ops;
 
 #endif

arch/arm/mach-omap2/clock2420_data.c

@@ -0,0 +1,1910 @@
+/*
+ *  linux/arch/arm/mach-omap2/clock2420_data.c
+ *
+ *  Copyright (C) 2005-2009 Texas Instruments, Inc.
+ *  Copyright (C) 2004-2010 Nokia Corporation
+ *
+ *  Contacts:
+ *  Richard Woodruff <r-woodruff2@ti.com>
+ *  Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/list.h>
+
+#include <plat/clkdev_omap.h>
+
+#include "clock.h"
+#include "clock2xxx.h"
+#include "opp2xxx.h"
+#include "prm.h"
+#include "cm.h"
+#include "prm-regbits-24xx.h"
+#include "cm-regbits-24xx.h"
+#include "sdrc.h"
+
+#define OMAP_CM_REGADDR                 OMAP2420_CM_REGADDR
+
+/*
+ * 2420 clock tree.
+ *
+ * NOTE:In many cases here we are assigning a 'default' parent.	In many
+ *	cases the parent is selectable.	The get/set parent calls will also
+ *	switch sources.
+ *
+ *	Many some clocks say always_enabled, but they can be auto idled for
+ *	power savings. They will always be available upon clock request.
+ *
+ *	Several sources are given initial rates which may be wrong, this will
+ *	be fixed up in the init func.
+ *
+ *	Things are broadly separated below by clock domains. It is
+ *	noteworthy that most periferals have dependencies on multiple clock
+ *	domains. Many get their interface clocks from the L4 domain, but get
+ *	functional clocks from fixed sources or other core domain derived
+ *	clocks.
+ */
+
+/* Base external input clocks */
+static struct clk func_32k_ck = {
+	.name		= "func_32k_ck",
+	.ops		= &clkops_null,
+	.rate		= 32000,
+	.clkdm_name	= "wkup_clkdm",
+};
+
+static struct clk secure_32k_ck = {
+	.name		= "secure_32k_ck",
+	.ops		= &clkops_null,
+	.rate		= 32768,
+	.clkdm_name	= "wkup_clkdm",
+};
+
+/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
+static struct clk osc_ck = {		/* (*12, *13, 19.2, *26, 38.4)MHz */
+	.name		= "osc_ck",
+	.ops		= &clkops_oscck,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &omap2_osc_clk_recalc,
+};
+
+/* Without modem likely 12MHz, with modem likely 13MHz */
+static struct clk sys_ck = {		/* (*12, *13, 19.2, 26, 38.4)MHz */
+	.name		= "sys_ck",		/* ~ ref_clk also */
+	.ops		= &clkops_null,
+	.parent		= &osc_ck,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &omap2xxx_sys_clk_recalc,
+};
+
+static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
+	.name		= "alt_ck",
+	.ops		= &clkops_null,
+	.rate		= 54000000,
+	.clkdm_name	= "wkup_clkdm",
+};
+
+/*
+ * Analog domain root source clocks
+ */
+
+/* dpll_ck, is broken out in to special cases through clksel */
+/* REVISIT: Rate changes on dpll_ck trigger a full set change.	...
+ * deal with this
+ */
+
+static struct dpll_data dpll_dd = {
+	.mult_div1_reg		= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.mult_mask		= OMAP24XX_DPLL_MULT_MASK,
+	.div1_mask		= OMAP24XX_DPLL_DIV_MASK,
+	.clk_bypass		= &sys_ck,
+	.clk_ref		= &sys_ck,
+	.control_reg		= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_mask		= OMAP24XX_EN_DPLL_MASK,
+	.max_multiplier		= 1023,
+	.min_divider		= 1,
+	.max_divider		= 16,
+	.rate_tolerance		= DEFAULT_DPLL_RATE_TOLERANCE
+};
+
+/*
+ * XXX Cannot add round_rate here yet, as this is still a composite clock,
+ * not just a DPLL
+ */
+static struct clk dpll_ck = {
+	.name		= "dpll_ck",
+	.ops		= &clkops_null,
+	.parent		= &sys_ck,		/* Can be func_32k also */
+	.dpll_data	= &dpll_dd,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &omap2_dpllcore_recalc,
+	.set_rate	= &omap2_reprogram_dpllcore,
+};
+
+static struct clk apll96_ck = {
+	.name		= "apll96_ck",
+	.ops		= &clkops_apll96,
+	.parent		= &sys_ck,
+	.rate		= 96000000,
+	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "wkup_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP24XX_EN_96M_PLL_SHIFT,
+};
+
+static struct clk apll54_ck = {
+	.name		= "apll54_ck",
+	.ops		= &clkops_apll54,
+	.parent		= &sys_ck,
+	.rate		= 54000000,
+	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "wkup_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP24XX_EN_54M_PLL_SHIFT,
+};
+
+/*
+ * PRCM digital base sources
+ */
+
+/* func_54m_ck */
+
+static const struct clksel_rate func_54m_apll54_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate func_54m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel func_54m_clksel[] = {
+	{ .parent = &apll54_ck, .rates = func_54m_apll54_rates, },
+	{ .parent = &alt_ck,	.rates = func_54m_alt_rates, },
+	{ .parent = NULL },
+};
+
+static struct clk func_54m_ck = {
+	.name		= "func_54m_ck",
+	.ops		= &clkops_null,
+	.parent		= &apll54_ck,	/* can also be alt_clk */
+	.clkdm_name	= "wkup_clkdm",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_54M_SOURCE,
+	.clksel		= func_54m_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk core_ck = {
+	.name		= "core_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll_ck,		/* can also be 32k */
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk func_96m_ck = {
+	.name		= "func_96m_ck",
+	.ops		= &clkops_null,
+	.parent		= &apll96_ck,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* func_48m_ck */
+
+static const struct clksel_rate func_48m_apll96_rates[] = {
+	{ .div = 2, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate func_48m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel func_48m_clksel[] = {
+	{ .parent = &apll96_ck,	.rates = func_48m_apll96_rates },
+	{ .parent = &alt_ck, .rates = func_48m_alt_rates },
+	{ .parent = NULL }
+};
+
+static struct clk func_48m_ck = {
+	.name		= "func_48m_ck",
+	.ops		= &clkops_null,
+	.parent		= &apll96_ck,	 /* 96M or Alt */
+	.clkdm_name	= "wkup_clkdm",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_48M_SOURCE,
+	.clksel		= func_48m_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk func_12m_ck = {
+	.name		= "func_12m_ck",
+	.ops		= &clkops_null,
+	.parent		= &func_48m_ck,
+	.fixed_div	= 4,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &omap_fixed_divisor_recalc,
+};
+
+/* Secure timer, only available in secure mode */
+static struct clk wdt1_osc_ck = {
+	.name		= "ck_wdt1_osc",
+	.ops		= &clkops_null, /* RMK: missing? */
+	.parent		= &osc_ck,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * The common_clkout* clksel_rate structs are common to
+ * sys_clkout, sys_clkout_src, sys_clkout2, and sys_clkout2_src.
+ * sys_clkout2_* are 2420-only, so the
+ * clksel_rate flags fields are inaccurate for those clocks. This is
+ * harmless since access to those clocks are gated by the struct clk
+ * flags fields, which mark them as 2420-only.
+ */
+static const struct clksel_rate common_clkout_src_core_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_clkout_src_sys_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_clkout_src_96m_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_clkout_src_54m_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel common_clkout_src_clksel[] = {
+	{ .parent = &core_ck,	  .rates = common_clkout_src_core_rates },
+	{ .parent = &sys_ck,	  .rates = common_clkout_src_sys_rates },
+	{ .parent = &func_96m_ck, .rates = common_clkout_src_96m_rates },
+	{ .parent = &func_54m_ck, .rates = common_clkout_src_54m_rates },
+	{ .parent = NULL }
+};
+
+static struct clk sys_clkout_src = {
+	.name		= "sys_clkout_src",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &func_54m_ck,
+	.clkdm_name	= "wkup_clkdm",
+	.enable_reg	= OMAP2420_PRCM_CLKOUT_CTRL,
+	.enable_bit	= OMAP24XX_CLKOUT_EN_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP2420_PRCM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP24XX_CLKOUT_SOURCE_MASK,
+	.clksel		= common_clkout_src_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static const struct clksel_rate common_clkout_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 8, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 16, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 0 },
+};
+
+static const struct clksel sys_clkout_clksel[] = {
+	{ .parent = &sys_clkout_src, .rates = common_clkout_rates },
+	{ .parent = NULL }
+};
+
+static struct clk sys_clkout = {
+	.name		= "sys_clkout",
+	.ops		= &clkops_null,
+	.parent		= &sys_clkout_src,
+	.clkdm_name	= "wkup_clkdm",
+	.clksel_reg	= OMAP2420_PRCM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP24XX_CLKOUT_DIV_MASK,
+	.clksel		= sys_clkout_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/* In 2430, new in 2420 ES2 */
+static struct clk sys_clkout2_src = {
+	.name		= "sys_clkout2_src",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &func_54m_ck,
+	.clkdm_name	= "wkup_clkdm",
+	.enable_reg	= OMAP2420_PRCM_CLKOUT_CTRL,
+	.enable_bit	= OMAP2420_CLKOUT2_EN_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP2420_PRCM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP2420_CLKOUT2_SOURCE_MASK,
+	.clksel		= common_clkout_src_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static const struct clksel sys_clkout2_clksel[] = {
+	{ .parent = &sys_clkout2_src, .rates = common_clkout_rates },
+	{ .parent = NULL }
+};
+
+/* In 2430, new in 2420 ES2 */
+static struct clk sys_clkout2 = {
+	.name		= "sys_clkout2",
+	.ops		= &clkops_null,
+	.parent		= &sys_clkout2_src,
+	.clkdm_name	= "wkup_clkdm",
+	.clksel_reg	= OMAP2420_PRCM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP2420_CLKOUT2_DIV_MASK,
+	.clksel		= sys_clkout2_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk emul_ck = {
+	.name		= "emul_ck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &func_54m_ck,
+	.clkdm_name	= "wkup_clkdm",
+	.enable_reg	= OMAP2420_PRCM_CLKEMUL_CTRL,
+	.enable_bit	= OMAP24XX_EMULATION_EN_SHIFT,
+	.recalc		= &followparent_recalc,
+
+};
+
+/*
+ * MPU clock domain
+ *	Clocks:
+ *		MPU_FCLK, MPU_ICLK
+ *		INT_M_FCLK, INT_M_I_CLK
+ *
+ * - Individual clocks are hardware managed.
+ * - Base divider comes from: CM_CLKSEL_MPU
+ *
+ */
+static const struct clksel_rate mpu_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_242X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 0 },
+};
+
+static const struct clksel mpu_clksel[] = {
+	{ .parent = &core_ck, .rates = mpu_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mpu_ck = {	/* Control cpu */
+	.name		= "mpu_ck",
+	.ops		= &clkops_null,
+	.parent		= &core_ck,
+	.clkdm_name	= "mpu_clkdm",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP24XX_CLKSEL_MPU_MASK,
+	.clksel		= mpu_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * DSP (2420-UMA+IVA1) clock domain
+ * Clocks:
+ *	2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP
+ *
+ * Won't be too specific here. The core clock comes into this block
+ * it is divided then tee'ed. One branch goes directly to xyz enable
+ * controls. The other branch gets further divided by 2 then possibly
+ * routed into a synchronizer and out of clocks abc.
+ */
+static const struct clksel_rate dsp_fck_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 12, .val = 12, .flags = RATE_IN_242X },
+	{ .div = 0 },
+};
+
+static const struct clksel dsp_fck_clksel[] = {
+	{ .parent = &core_ck, .rates = dsp_fck_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk dsp_fck = {
+	.name		= "dsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_ck,
+	.clkdm_name	= "dsp_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP24XX_CLKSEL_DSP_MASK,
+	.clksel		= dsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* DSP interface clock */
+static const struct clksel_rate dsp_irate_ick_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 0 },
+};
+
+static const struct clksel dsp_irate_ick_clksel[] = {
+	{ .parent = &dsp_fck, .rates = dsp_irate_ick_rates },
+	{ .parent = NULL }
+};
+
+/* This clock does not exist as such in the TRM. */
+static struct clk dsp_irate_ick = {
+	.name		= "dsp_irate_ick",
+	.ops		= &clkops_null,
+	.parent		= &dsp_fck,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP24XX_CLKSEL_DSP_IF_MASK,
+	.clksel		= dsp_irate_ick_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* 2420 only */
+static struct clk dsp_ick = {
+	.name		= "dsp_ick",	 /* apparently ipi and isp */
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dsp_irate_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP2420_EN_DSP_IPI_SHIFT,	      /* for ipi */
+};
+
+/*
+ * The IVA1 is an ARM7 core on the 2420 that has nothing to do with
+ * the C54x, but which is contained in the DSP powerdomain.  Does not
+ * exist on later OMAPs.
+ */
+static struct clk iva1_ifck = {
+	.name		= "iva1_ifck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_ck,
+	.clkdm_name	= "iva1_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP2420_EN_IVA_COP_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP2420_CLKSEL_IVA_MASK,
+	.clksel		= dsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* IVA1 mpu/int/i/f clocks are /2 of parent */
+static struct clk iva1_mpu_int_ifck = {
+	.name		= "iva1_mpu_int_ifck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &iva1_ifck,
+	.clkdm_name	= "iva1_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP2420_EN_IVA_MPU_SHIFT,
+	.fixed_div	= 2,
+	.recalc		= &omap_fixed_divisor_recalc,
+};
+
+/*
+ * L3 clock domain
+ * L3 clocks are used for both interface and functional clocks to
+ * multiple entities. Some of these clocks are completely managed
+ * by hardware, and some others allow software control. Hardware
+ * managed ones general are based on directly CLK_REQ signals and
+ * various auto idle settings. The functional spec sets many of these
+ * as 'tie-high' for their enables.
+ *
+ * I-CLOCKS:
+ *	L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA
+ *	CAM, HS-USB.
+ * F-CLOCK
+ *	SSI.
+ *
+ * GPMC memories and SDRC have timing and clock sensitive registers which
+ * may very well need notification when the clock changes. Currently for low
+ * operating points, these are taken care of in sleep.S.
+ */
+static const struct clksel_rate core_l3_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_242X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 12, .val = 12, .flags = RATE_IN_242X },
+	{ .div = 16, .val = 16, .flags = RATE_IN_242X },
+	{ .div = 0 }
+};
+
+static const struct clksel core_l3_clksel[] = {
+	{ .parent = &core_ck, .rates = core_l3_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk core_l3_ck = {	/* Used for ick and fck, interconnect */
+	.name		= "core_l3_ck",
+	.ops		= &clkops_null,
+	.parent		= &core_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_L3_MASK,
+	.clksel		= core_l3_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* usb_l4_ick */
+static const struct clksel_rate usb_l4_ick_core_l3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel usb_l4_ick_clksel[] = {
+	{ .parent = &core_l3_ck, .rates = usb_l4_ick_core_l3_rates },
+	{ .parent = NULL },
+};
+
+/* It is unclear from TRM whether usb_l4_ick is really in L3 or L4 clkdm */
+static struct clk usb_l4_ick = {	/* FS-USB interface clock */
+	.name		= "usb_l4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l3_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP24XX_EN_USB_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_USB_MASK,
+	.clksel		= usb_l4_ick_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * L4 clock management domain
+ *
+ * This domain contains lots of interface clocks from the L4 interface, some
+ * functional clocks.	Fixed APLL functional source clocks are managed in
+ * this domain.
+ */
+static const struct clksel_rate l4_core_l3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel l4_clksel[] = {
+	{ .parent = &core_l3_ck, .rates = l4_core_l3_rates },
+	{ .parent = NULL }
+};
+
+static struct clk l4_ck = {		/* used both as an ick and fck */
+	.name		= "l4_ck",
+	.ops		= &clkops_null,
+	.parent		= &core_l3_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_L4_MASK,
+	.clksel		= l4_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * SSI is in L3 management domain, its direct parent is core not l3,
+ * many core power domain entities are grouped into the L3 clock
+ * domain.
+ * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_ICLK
+ *
+ * ssr = core/1/2/3/4/5, sst = 1/2 ssr.
+ */
+static const struct clksel_rate ssi_ssr_sst_fck_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 0 }
+};
+
+static const struct clksel ssi_ssr_sst_fck_clksel[] = {
+	{ .parent = &core_ck, .rates = ssi_ssr_sst_fck_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk ssi_ssr_sst_fck = {
+	.name		= "ssi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP24XX_EN_SSI_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_SSI_MASK,
+	.clksel		= ssi_ssr_sst_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * Presumably this is the same as SSI_ICLK.
+ * TRM contradicts itself on what clockdomain SSI_ICLK is in
+ */
+static struct clk ssi_l4_ick = {
+	.name		= "ssi_l4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP24XX_EN_SSI_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+
+/*
+ * GFX clock domain
+ *	Clocks:
+ * GFX_FCLK, GFX_ICLK
+ * GFX_CG1(2d), GFX_CG2(3d)
+ *
+ * GFX_FCLK runs from L3, and is divided by (1,2,3,4)
+ * The 2d and 3d clocks run at a hardware determined
+ * divided value of fclk.
+ *
+ */
+
+/* This clksel struct is shared between gfx_3d_fck and gfx_2d_fck */
+static const struct clksel gfx_fck_clksel[] = {
+	{ .parent = &core_l3_ck, .rates = gfx_l3_rates },
+	{ .parent = NULL },
+};
+
+static struct clk gfx_3d_fck = {
+	.name		= "gfx_3d_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l3_ck,
+	.clkdm_name	= "gfx_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_3D_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
+	.clksel		= gfx_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk gfx_2d_fck = {
+	.name		= "gfx_2d_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l3_ck,
+	.clkdm_name	= "gfx_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_2D_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
+	.clksel		= gfx_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gfx_ick = {
+	.name		= "gfx_ick",		/* From l3 */
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l3_ck,
+	.clkdm_name	= "gfx_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP_EN_GFX_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * DSS clock domain
+ * CLOCKs:
+ * DSS_L4_ICLK, DSS_L3_ICLK,
+ * DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK
+ *
+ * DSS is both initiator and target.
+ */
+/* XXX Add RATE_NOT_VALIDATED */
+
+static const struct clksel_rate dss1_fck_sys_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate dss1_fck_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 5, .val = 5, .flags = RATE_IN_24XX },
+	{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
+	{ .div = 8, .val = 8, .flags = RATE_IN_24XX },
+	{ .div = 9, .val = 9, .flags = RATE_IN_24XX },
+	{ .div = 12, .val = 12, .flags = RATE_IN_24XX },
+	{ .div = 16, .val = 16, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel dss1_fck_clksel[] = {
+	{ .parent = &sys_ck,  .rates = dss1_fck_sys_rates },
+	{ .parent = &core_ck, .rates = dss1_fck_core_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dss_ick = {		/* Enables both L3,L4 ICLK's */
+	.name		= "dss_ick",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &l4_ck,	/* really both l3 and l4 */
+	.clkdm_name	= "dss_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_DSS1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss1_fck = {
+	.name		= "dss1_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &core_ck,		/* Core or sys */
+	.clkdm_name	= "dss_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_DSS1_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_DSS1_MASK,
+	.clksel		= dss1_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate dss2_fck_sys_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate dss2_fck_48m_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel dss2_fck_clksel[] = {
+	{ .parent = &sys_ck,	  .rates = dss2_fck_sys_rates },
+	{ .parent = &func_48m_ck, .rates = dss2_fck_48m_rates },
+	{ .parent = NULL }
+};
+
+static struct clk dss2_fck = {		/* Alt clk used in power management */
+	.name		= "dss2_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &sys_ck,		/* fixed at sys_ck or 48MHz */
+	.clkdm_name	= "dss_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_DSS2_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_DSS2_MASK,
+	.clksel		= dss2_fck_clksel,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_54m_fck = {	/* Alt clk used in power management */
+	.name		= "dss_54m_fck",	/* 54m tv clk */
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_54m_ck,
+	.clkdm_name	= "dss_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_TV_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * CORE power domain ICLK & FCLK defines.
+ * Many of the these can have more than one possible parent. Entries
+ * here will likely have an L4 interface parent, and may have multiple
+ * functional clock parents.
+ */
+static const struct clksel_rate gpt_alt_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel omap24xx_gpt_clksel[] = {
+	{ .parent = &func_32k_ck, .rates = gpt_32k_rates },
+	{ .parent = &sys_ck,	  .rates = gpt_sys_rates },
+	{ .parent = &alt_ck,	  .rates = gpt_alt_rates },
+	{ .parent = NULL },
+};
+
+static struct clk gpt1_ick = {
+	.name		= "gpt1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_GPT1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt1_fck = {
+	.name		= "gpt1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_GPT1_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT1_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk gpt2_ick = {
+	.name		= "gpt2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt2_fck = {
+	.name		= "gpt2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT2_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT2_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt3_ick = {
+	.name		= "gpt3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt3_fck = {
+	.name		= "gpt3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT3_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT3_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt4_ick = {
+	.name		= "gpt4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt4_fck = {
+	.name		= "gpt4_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT4_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT4_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt5_ick = {
+	.name		= "gpt5_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT5_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt5_fck = {
+	.name		= "gpt5_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT5_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT5_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt6_ick = {
+	.name		= "gpt6_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT6_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt6_fck = {
+	.name		= "gpt6_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT6_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT6_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt7_ick = {
+	.name		= "gpt7_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT7_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt7_fck = {
+	.name		= "gpt7_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT7_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT7_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt8_ick = {
+	.name		= "gpt8_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT8_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt8_fck = {
+	.name		= "gpt8_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT8_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT8_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt9_ick = {
+	.name		= "gpt9_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT9_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt9_fck = {
+	.name		= "gpt9_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT9_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT9_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt10_ick = {
+	.name		= "gpt10_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT10_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt10_fck = {
+	.name		= "gpt10_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT10_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT10_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt11_ick = {
+	.name		= "gpt11_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT11_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt11_fck = {
+	.name		= "gpt11_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT11_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT11_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt12_ick = {
+	.name		= "gpt12_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt12_fck = {
+	.name		= "gpt12_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &secure_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT12_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mcbsp1_ick = {
+	.name		= "mcbsp1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp1_fck = {
+	.name		= "mcbsp1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_96m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp2_ick = {
+	.name		= "mcbsp2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp2_fck = {
+	.name		= "mcbsp2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_96m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi1_ick = {
+	.name		= "mcspi1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCSPI1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi1_fck = {
+	.name		= "mcspi1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_48m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCSPI1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_ick = {
+	.name		= "mcspi2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCSPI2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_fck = {
+	.name		= "mcspi2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_48m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCSPI2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_ick = {
+	.name		= "uart1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_UART1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_fck = {
+	.name		= "uart1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_48m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_UART1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_ick = {
+	.name		= "uart2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_UART2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_fck = {
+	.name		= "uart2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_48m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_UART2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_ick = {
+	.name		= "uart3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP24XX_EN_UART3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_fck = {
+	.name		= "uart3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_48m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP24XX_EN_UART3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpios_ick = {
+	.name		= "gpios_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_GPIOS_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpios_fck = {
+	.name		= "gpios_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "wkup_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_GPIOS_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mpu_wdt_ick = {
+	.name		= "mpu_wdt_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_MPU_WDT_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mpu_wdt_fck = {
+	.name		= "mpu_wdt_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "wkup_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_MPU_WDT_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sync_32k_ick = {
+	.name		= "sync_32k_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_32KSYNC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt1_ick = {
+	.name		= "wdt1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_WDT1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk omapctrl_ick = {
+	.name		= "omapctrl_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_OMAPCTRL_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk cam_ick = {
+	.name		= "cam_ick",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_CAM_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * cam_fck controls both CAM_MCLK and CAM_FCLK.  It should probably be
+ * split into two separate clocks, since the parent clocks are different
+ * and the clockdomains are also different.
+ */
+static struct clk cam_fck = {
+	.name		= "cam_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &func_96m_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_CAM_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mailboxes_ick = {
+	.name		= "mailboxes_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MAILBOXES_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt4_ick = {
+	.name		= "wdt4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_WDT4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt4_fck = {
+	.name		= "wdt4_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_WDT4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt3_ick = {
+	.name		= "wdt3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_WDT3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt3_fck = {
+	.name		= "wdt3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_32k_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_WDT3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mspro_ick = {
+	.name		= "mspro_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MSPRO_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mspro_fck = {
+	.name		= "mspro_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_96m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MSPRO_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmc_ick = {
+	.name		= "mmc_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_MMC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmc_fck = {
+	.name		= "mmc_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_96m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_MMC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk fac_ick = {
+	.name		= "fac_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_FAC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk fac_fck = {
+	.name		= "fac_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_12m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_FAC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk eac_ick = {
+	.name		= "eac_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_EAC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk eac_fck = {
+	.name		= "eac_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_96m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_EAC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hdq_ick = {
+	.name		= "hdq_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_HDQ_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hdq_fck = {
+	.name		= "hdq_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_12m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_HDQ_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c2_ick = {
+	.name		= "i2c2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_I2C2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c2_fck = {
+	.name		= "i2c2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_12m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_I2C2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c1_ick = {
+	.name		= "i2c1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_I2C1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c1_fck = {
+	.name		= "i2c1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_12m_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_I2C1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpmc_fck = {
+	.name		= "gpmc_fck",
+	.ops		= &clkops_null, /* RMK: missing? */
+	.parent		= &core_l3_ck,
+	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sdma_fck = {
+	.name		= "sdma_fck",
+	.ops		= &clkops_null, /* RMK: missing? */
+	.parent		= &core_l3_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sdma_ick = {
+	.name		= "sdma_ick",
+	.ops		= &clkops_null, /* RMK: missing? */
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk vlynq_ick = {
+	.name		= "vlynq_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l3_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_VLYNQ_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel_rate vlynq_fck_96m_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_242X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate vlynq_fck_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_242X },
+	{ .div = 2, .val = 2, .flags = RATE_IN_242X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_242X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_242X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 9, .val = 9, .flags = RATE_IN_242X },
+	{ .div = 12, .val = 12, .flags = RATE_IN_242X },
+	{ .div = 16, .val = 16, .flags = RATE_IN_242X | DEFAULT_RATE },
+	{ .div = 18, .val = 18, .flags = RATE_IN_242X },
+	{ .div = 0 }
+};
+
+static const struct clksel vlynq_fck_clksel[] = {
+	{ .parent = &func_96m_ck, .rates = vlynq_fck_96m_rates },
+	{ .parent = &core_ck,	  .rates = vlynq_fck_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk vlynq_fck = {
+	.name		= "vlynq_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_96m_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_VLYNQ_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP2420_CLKSEL_VLYNQ_MASK,
+	.clksel		= vlynq_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk des_ick = {
+	.name		= "des_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_DES_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sha_ick = {
+	.name		= "sha_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_SHA_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk rng_ick = {
+	.name		= "rng_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_RNG_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk aes_ick = {
+	.name		= "aes_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_AES_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk pka_ick = {
+	.name		= "pka_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ck,
+	.clkdm_name	= "core_l4_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_PKA_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usb_fck = {
+	.name		= "usb_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &func_48m_ck,
+	.clkdm_name	= "core_l3_clkdm",
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP24XX_EN_USB_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * This clock is a composite clock which does entire set changes then
+ * forces a rebalance. It keys on the MPU speed, but it really could
+ * be any key speed part of a set in the rate table.
+ *
+ * to really change a set, you need memory table sets which get changed
+ * in sram, pre-notifiers & post notifiers, changing the top set, without
+ * having low level display recalc's won't work... this is why dpm notifiers
+ * work, isr's off, walk a list of clocks already _off_ and not messing with
+ * the bus.
+ *
+ * This clock should have no parent. It embodies the entire upper level
+ * active set. A parent will mess up some of the init also.
+ */
+static struct clk virt_prcm_set = {
+	.name		= "virt_prcm_set",
+	.ops		= &clkops_null,
+	.parent		= &mpu_ck,	/* Indexed by mpu speed, no parent */
+	.recalc		= &omap2_table_mpu_recalc,	/* sets are keyed on mpu rate */
+	.set_rate	= &omap2_select_table_rate,
+	.round_rate	= &omap2_round_to_table_rate,
+};
+
+
+/*
+ * clkdev integration
+ */
+
+static struct omap_clk omap2420_clks[] = {
+	/* external root sources */
+	CLK(NULL,	"func_32k_ck",	&func_32k_ck,	CK_242X),
+	CLK(NULL,	"secure_32k_ck", &secure_32k_ck, CK_242X),
+	CLK(NULL,	"osc_ck",	&osc_ck,	CK_242X),
+	CLK(NULL,	"sys_ck",	&sys_ck,	CK_242X),
+	CLK(NULL,	"alt_ck",	&alt_ck,	CK_242X),
+	/* internal analog sources */
+	CLK(NULL,	"dpll_ck",	&dpll_ck,	CK_242X),
+	CLK(NULL,	"apll96_ck",	&apll96_ck,	CK_242X),
+	CLK(NULL,	"apll54_ck",	&apll54_ck,	CK_242X),
+	/* internal prcm root sources */
+	CLK(NULL,	"func_54m_ck",	&func_54m_ck,	CK_242X),
+	CLK(NULL,	"core_ck",	&core_ck,	CK_242X),
+	CLK(NULL,	"func_96m_ck",	&func_96m_ck,	CK_242X),
+	CLK(NULL,	"func_48m_ck",	&func_48m_ck,	CK_242X),
+	CLK(NULL,	"func_12m_ck",	&func_12m_ck,	CK_242X),
+	CLK(NULL,	"ck_wdt1_osc",	&wdt1_osc_ck,	CK_242X),
+	CLK(NULL,	"sys_clkout_src", &sys_clkout_src, CK_242X),
+	CLK(NULL,	"sys_clkout",	&sys_clkout,	CK_242X),
+	CLK(NULL,	"sys_clkout2_src", &sys_clkout2_src, CK_242X),
+	CLK(NULL,	"sys_clkout2",	&sys_clkout2,	CK_242X),
+	CLK(NULL,	"emul_ck",	&emul_ck,	CK_242X),
+	/* mpu domain clocks */
+	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_242X),
+	/* dsp domain clocks */
+	CLK(NULL,	"dsp_fck",	&dsp_fck,	CK_242X),
+	CLK(NULL,	"dsp_irate_ick", &dsp_irate_ick, CK_242X),
+	CLK(NULL,	"dsp_ick",	&dsp_ick,	CK_242X),
+	CLK(NULL,	"iva1_ifck",	&iva1_ifck,	CK_242X),
+	CLK(NULL,	"iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X),
+	/* GFX domain clocks */
+	CLK(NULL,	"gfx_3d_fck",	&gfx_3d_fck,	CK_242X),
+	CLK(NULL,	"gfx_2d_fck",	&gfx_2d_fck,	CK_242X),
+	CLK(NULL,	"gfx_ick",	&gfx_ick,	CK_242X),
+	/* DSS domain clocks */
+	CLK("omapdss",	"ick",		&dss_ick,	CK_242X),
+	CLK("omapdss",	"dss1_fck",	&dss1_fck,	CK_242X),
+	CLK("omapdss",	"dss2_fck",	&dss2_fck,	CK_242X),
+	CLK("omapdss",	"tv_fck",	&dss_54m_fck,	CK_242X),
+	/* L3 domain clocks */
+	CLK(NULL,	"core_l3_ck",	&core_l3_ck,	CK_242X),
+	CLK(NULL,	"ssi_fck",	&ssi_ssr_sst_fck, CK_242X),
+	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_242X),
+	/* L4 domain clocks */
+	CLK(NULL,	"l4_ck",	&l4_ck,		CK_242X),
+	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_242X),
+	/* virtual meta-group clock */
+	CLK(NULL,	"virt_prcm_set", &virt_prcm_set, CK_242X),
+	/* general l4 interface ck, multi-parent functional clk */
+	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_242X),
+	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_242X),
+	CLK(NULL,	"gpt2_ick",	&gpt2_ick,	CK_242X),
+	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_242X),
+	CLK(NULL,	"gpt3_ick",	&gpt3_ick,	CK_242X),
+	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_242X),
+	CLK(NULL,	"gpt4_ick",	&gpt4_ick,	CK_242X),
+	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_242X),
+	CLK(NULL,	"gpt5_ick",	&gpt5_ick,	CK_242X),
+	CLK(NULL,	"gpt5_fck",	&gpt5_fck,	CK_242X),
+	CLK(NULL,	"gpt6_ick",	&gpt6_ick,	CK_242X),
+	CLK(NULL,	"gpt6_fck",	&gpt6_fck,	CK_242X),
+	CLK(NULL,	"gpt7_ick",	&gpt7_ick,	CK_242X),
+	CLK(NULL,	"gpt7_fck",	&gpt7_fck,	CK_242X),
+	CLK(NULL,	"gpt8_ick",	&gpt8_ick,	CK_242X),
+	CLK(NULL,	"gpt8_fck",	&gpt8_fck,	CK_242X),
+	CLK(NULL,	"gpt9_ick",	&gpt9_ick,	CK_242X),
+	CLK(NULL,	"gpt9_fck",	&gpt9_fck,	CK_242X),
+	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_242X),
+	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_242X),
+	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_242X),
+	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_242X),
+	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_242X),
+	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_242X),
+	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_242X),
+	CLK("omap-mcbsp.1", "fck",	&mcbsp1_fck,	CK_242X),
+	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_242X),
+	CLK("omap-mcbsp.2", "fck",	&mcbsp2_fck,	CK_242X),
+	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_242X),
+	CLK("omap2_mcspi.1", "fck",	&mcspi1_fck,	CK_242X),
+	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_242X),
+	CLK("omap2_mcspi.2", "fck",	&mcspi2_fck,	CK_242X),
+	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_242X),
+	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_242X),
+	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_242X),
+	CLK(NULL,	"uart2_fck",	&uart2_fck,	CK_242X),
+	CLK(NULL,	"uart3_ick",	&uart3_ick,	CK_242X),
+	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_242X),
+	CLK(NULL,	"gpios_ick",	&gpios_ick,	CK_242X),
+	CLK(NULL,	"gpios_fck",	&gpios_fck,	CK_242X),
+	CLK("omap_wdt",	"ick",		&mpu_wdt_ick,	CK_242X),
+	CLK("omap_wdt",	"fck",		&mpu_wdt_fck,	CK_242X),
+	CLK(NULL,	"sync_32k_ick",	&sync_32k_ick,	CK_242X),
+	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_242X),
+	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_242X),
+	CLK("omap24xxcam", "fck",	&cam_fck,	CK_242X),
+	CLK("omap24xxcam", "ick",	&cam_ick,	CK_242X),
+	CLK(NULL,	"mailboxes_ick", &mailboxes_ick,	CK_242X),
+	CLK(NULL,	"wdt4_ick",	&wdt4_ick,	CK_242X),
+	CLK(NULL,	"wdt4_fck",	&wdt4_fck,	CK_242X),
+	CLK(NULL,	"wdt3_ick",	&wdt3_ick,	CK_242X),
+	CLK(NULL,	"wdt3_fck",	&wdt3_fck,	CK_242X),
+	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_242X),
+	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_242X),
+	CLK("mmci-omap.0", "ick",	&mmc_ick,	CK_242X),
+	CLK("mmci-omap.0", "fck",	&mmc_fck,	CK_242X),
+	CLK(NULL,	"fac_ick",	&fac_ick,	CK_242X),
+	CLK(NULL,	"fac_fck",	&fac_fck,	CK_242X),
+	CLK(NULL,	"eac_ick",	&eac_ick,	CK_242X),
+	CLK(NULL,	"eac_fck",	&eac_fck,	CK_242X),
+	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_242X),
+	CLK("omap_hdq.1", "fck",	&hdq_fck,	CK_242X),
+	CLK("i2c_omap.1", "ick",	&i2c1_ick,	CK_242X),
+	CLK("i2c_omap.1", "fck",	&i2c1_fck,	CK_242X),
+	CLK("i2c_omap.2", "ick",	&i2c2_ick,	CK_242X),
+	CLK("i2c_omap.2", "fck",	&i2c2_fck,	CK_242X),
+	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_242X),
+	CLK(NULL,	"sdma_fck",	&sdma_fck,	CK_242X),
+	CLK(NULL,	"sdma_ick",	&sdma_ick,	CK_242X),
+	CLK(NULL,	"vlynq_ick",	&vlynq_ick,	CK_242X),
+	CLK(NULL,	"vlynq_fck",	&vlynq_fck,	CK_242X),
+	CLK(NULL,	"des_ick",	&des_ick,	CK_242X),
+	CLK(NULL,	"sha_ick",	&sha_ick,	CK_242X),
+	CLK("omap_rng",	"ick",		&rng_ick,	CK_242X),
+	CLK(NULL,	"aes_ick",	&aes_ick,	CK_242X),
+	CLK(NULL,	"pka_ick",	&pka_ick,	CK_242X),
+	CLK(NULL,	"usb_fck",	&usb_fck,	CK_242X),
+};
+
+/*
+ * init code
+ */
+
+int __init omap2420_clk_init(void)
+{
+	const struct prcm_config *prcm;
+	struct omap_clk *c;
+	u32 clkrate;
+
+	prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
+	cm_idlest_pll = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST);
+	cpu_mask = RATE_IN_242X;
+	rate_table = omap2420_rate_table;
+
+	clk_init(&omap2_clk_functions);
+
+	for (c = omap2420_clks; c < omap2420_clks + ARRAY_SIZE(omap2420_clks);
+	     c++)
+		clk_preinit(c->lk.clk);
+
+	osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
+	propagate_rate(&osc_ck);
+	sys_ck.rate = omap2xxx_sys_clk_recalc(&sys_ck);
+	propagate_rate(&sys_ck);
+
+	for (c = omap2420_clks; c < omap2420_clks + ARRAY_SIZE(omap2420_clks);
+	     c++) {
+		clkdev_add(&c->lk);
+		clk_register(c->lk.clk);
+		omap2_init_clk_clkdm(c->lk.clk);
+	}
+
+	/* Check the MPU rate set by bootloader */
+	clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck.rate)
+			continue;
+		if (prcm->dpll_speed <= clkrate)
+			break;
+	}
+	curr_prcm_set = prcm;
+
+	recalculate_root_clocks();
+
+	pr_info("Clocking rate (Crystal/DPLL/MPU): %ld.%01ld/%ld/%ld MHz\n",
+		(sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
+		(dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
+
+	/*
+	 * Only enable those clocks we will need, let the drivers
+	 * enable other clocks as necessary
+	 */
+	clk_enable_init_clocks();
+
+	/* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
+	vclk = clk_get(NULL, "virt_prcm_set");
+	sclk = clk_get(NULL, "sys_ck");
+	dclk = clk_get(NULL, "dpll_ck");
+
+	return 0;
+}
+

arch/arm/mach-omap2/clock2430.c

@@ -0,0 +1,59 @@
+/*
+ * clock2430.c - OMAP2430-specific clock integration code
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ * Gordon McNutt and RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "clock2xxx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+
+/**
+ * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
+ * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE.  This custom function
+ * passes back the correct CM_IDLEST register address for I2CHS
+ * modules.  No return value.
+ */
+static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
+					   void __iomem **idlest_reg,
+					   u8 *idlest_bit,
+					   u8 *idlest_val)
+{
+	*idlest_reg = OMAP2430_CM_REGADDR(CORE_MOD, CM_IDLEST);
+	*idlest_bit = clk->enable_bit;
+	*idlest_val = OMAP24XX_CM_IDLEST_VAL;
+}
+
+/* 2430 I2CHS has non-standard IDLEST register */
+const struct clkops clkops_omap2430_i2chs_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap2430_clk_i2chs_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+};

arch/arm/mach-omap2/clock2xxx.c

@@ -1,15 +1,15 @@
 /*
- *  linux/arch/arm/mach-omap2/clock.c
+ * clock2xxx.c - OMAP2xxx-specific clock integration code
  *
- *  Copyright (C) 2005-2008 Texas Instruments, Inc.
- *  Copyright (C) 2004-2008 Nokia Corporation
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
  *
- *  Contacts:
- *  Richard Woodruff <r-woodruff2@ti.com>
- *  Paul Walmsley
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
  *
- *  Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- *  Gordon McNutt and RidgeRun, Inc.
+ * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ * Gordon McNutt and RidgeRun, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -17,568 +17,28 @@
  */
 #undef DEBUG
 
-#include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
 #include <linux/errno.h>
-#include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <linux/cpufreq.h>
-#include <linux/bitops.h>
 
 #include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/prcm.h>
-#include <plat/clkdev_omap.h>
-#include <asm/div64.h>
-#include <asm/clkdev.h>
 
-#include <plat/sdrc.h>
 #include "clock.h"
 #include "clock2xxx.h"
-#include "opp2xxx.h"
-#include "prm.h"
-#include "prm-regbits-24xx.h"
 #include "cm.h"
 #include "cm-regbits-24xx.h"
 
-
-/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
-#define EN_APLL_STOPPED			0
-#define EN_APLL_LOCKED			3
-
-/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */
-#define APLLS_CLKIN_19_2MHZ		0
-#define APLLS_CLKIN_13MHZ		2
-#define APLLS_CLKIN_12MHZ		3
-
-/* #define DOWN_VARIABLE_DPLL 1 */		/* Experimental */
-
-const struct prcm_config *curr_prcm_set;
-const struct prcm_config *rate_table;
-
 struct clk *vclk, *sclk, *dclk;
 
-void __iomem *prcm_clksrc_ctrl;
-
-/*-------------------------------------------------------------------------
- * Omap24xx specific clock functions
- *-------------------------------------------------------------------------*/
-
-/**
- * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- *
- * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
- * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE.  This custom function
- * passes back the correct CM_IDLEST register address for I2CHS
- * modules.  No return value.
- */
-static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
-					   void __iomem **idlest_reg,
-					   u8 *idlest_bit)
-{
-	*idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST);
-	*idlest_bit = clk->enable_bit;
-}
-
-/* 2430 I2CHS has non-standard IDLEST register */
-const struct clkops clkops_omap2430_i2chs_wait = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.find_idlest	= omap2430_clk_i2chs_find_idlest,
-	.find_companion = omap2_clk_dflt_find_companion,
-};
-
-/**
- * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
- * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
- *
- * Returns the CORE_CLK rate.  CORE_CLK can have one of three rate
- * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
- * (the latter is unusual).  This currently should be called with
- * struct clk *dpll_ck, which is a composite clock of dpll_ck and
- * core_ck.
- */
-unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
-{
-	long long core_clk;
-	u32 v;
-
-	core_clk = omap2_get_dpll_rate(clk);
-
-	v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	v &= OMAP24XX_CORE_CLK_SRC_MASK;
-
-	if (v == CORE_CLK_SRC_32K)
-		core_clk = 32768;
-	else
-		core_clk *= v;
-
-	return core_clk;
-}
-
-static int omap2_enable_osc_ck(struct clk *clk)
-{
-	u32 pcc;
-
-	pcc = __raw_readl(prcm_clksrc_ctrl);
-
-	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
-
-	return 0;
-}
-
-static void omap2_disable_osc_ck(struct clk *clk)
-{
-	u32 pcc;
-
-	pcc = __raw_readl(prcm_clksrc_ctrl);
-
-	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
-}
-
-const struct clkops clkops_oscck = {
-	.enable		= omap2_enable_osc_ck,
-	.disable	= omap2_disable_osc_ck,
-};
-
-#ifdef OLD_CK
-/* Recalculate SYST_CLK */
-static void omap2_sys_clk_recalc(struct clk *clk)
-{
-	u32 div = PRCM_CLKSRC_CTRL;
-	div &= (1 << 7) | (1 << 6);	/* Test if ext clk divided by 1 or 2 */
-	div >>= clk->rate_offset;
-	clk->rate = (clk->parent->rate / div);
-	propagate_rate(clk);
-}
-#endif	/* OLD_CK */
-
-/* Enable an APLL if off */
-static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask)
-{
-	u32 cval, apll_mask;
-
-	apll_mask = EN_APLL_LOCKED << clk->enable_bit;
-
-	cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
-
-	if ((cval & apll_mask) == apll_mask)
-		return 0;   /* apll already enabled */
-
-	cval &= ~apll_mask;
-	cval |= apll_mask;
-	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
-
-	omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), status_mask,
-			     clk->name);
-
-	/*
-	 * REVISIT: Should we return an error code if omap2_wait_clock_ready()
-	 * fails?
-	 */
-	return 0;
-}
-
-static int omap2_clk_apll96_enable(struct clk *clk)
-{
-	return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL);
-}
-
-static int omap2_clk_apll54_enable(struct clk *clk)
-{
-	return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL);
-}
-
-/* Stop APLL */
-static void omap2_clk_apll_disable(struct clk *clk)
-{
-	u32 cval;
-
-	cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
-	cval &= ~(EN_APLL_LOCKED << clk->enable_bit);
-	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
-}
-
-const struct clkops clkops_apll96 = {
-	.enable		= omap2_clk_apll96_enable,
-	.disable	= omap2_clk_apll_disable,
-};
-
-const struct clkops clkops_apll54 = {
-	.enable		= omap2_clk_apll54_enable,
-	.disable	= omap2_clk_apll_disable,
-};
-
-/*
- * Uses the current prcm set to tell if a rate is valid.
- * You can go slower, but not faster within a given rate set.
- */
-long omap2_dpllcore_round_rate(unsigned long target_rate)
-{
-	u32 high, low, core_clk_src;
-
-	core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
-
-	if (core_clk_src == CORE_CLK_SRC_DPLL) {	/* DPLL clockout */
-		high = curr_prcm_set->dpll_speed * 2;
-		low = curr_prcm_set->dpll_speed;
-	} else {				/* DPLL clockout x 2 */
-		high = curr_prcm_set->dpll_speed;
-		low = curr_prcm_set->dpll_speed / 2;
-	}
-
-#ifdef DOWN_VARIABLE_DPLL
-	if (target_rate > high)
-		return high;
-	else
-		return target_rate;
-#else
-	if (target_rate > low)
-		return high;
-	else
-		return low;
-#endif
-
-}
-
-unsigned long omap2_dpllcore_recalc(struct clk *clk)
-{
-	return omap2xxx_clk_get_core_rate(clk);
-}
-
-int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
-{
-	u32 cur_rate, low, mult, div, valid_rate, done_rate;
-	u32 bypass = 0;
-	struct prcm_config tmpset;
-	const struct dpll_data *dd;
-
-	cur_rate = omap2xxx_clk_get_core_rate(dclk);
-	mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	mult &= OMAP24XX_CORE_CLK_SRC_MASK;
-
-	if ((rate == (cur_rate / 2)) && (mult == 2)) {
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
-	} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-	} else if (rate != cur_rate) {
-		valid_rate = omap2_dpllcore_round_rate(rate);
-		if (valid_rate != rate)
-			return -EINVAL;
-
-		if (mult == 1)
-			low = curr_prcm_set->dpll_speed;
-		else
-			low = curr_prcm_set->dpll_speed / 2;
-
-		dd = clk->dpll_data;
-		if (!dd)
-			return -EINVAL;
-
-		tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
-		tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
-					   dd->div1_mask);
-		div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
-		tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-		tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
-		if (rate > low) {
-			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
-			mult = ((rate / 2) / 1000000);
-			done_rate = CORE_CLK_SRC_DPLL_X2;
-		} else {
-			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL;
-			mult = (rate / 1000000);
-			done_rate = CORE_CLK_SRC_DPLL;
-		}
-		tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask));
-		tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask));
-
-		/* Worst case */
-		tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS;
-
-		if (rate == curr_prcm_set->xtal_speed)	/* If asking for 1-1 */
-			bypass = 1;
-
-		/* For omap2xxx_sdrc_init_params() */
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-
-		/* Force dll lock mode */
-		omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
-			       bypass);
-
-		/* Errata: ret dll entry state */
-		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
-		omap2xxx_sdrc_reprogram(done_rate, 0);
-	}
-
-	return 0;
-}
-
-/**
- * omap2_table_mpu_recalc - just return the MPU speed
- * @clk: virt_prcm_set struct clk
- *
- * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
- */
-unsigned long omap2_table_mpu_recalc(struct clk *clk)
-{
-	return curr_prcm_set->mpu_speed;
-}
-
-/*
- * Look for a rate equal or less than the target rate given a configuration set.
- *
- * What's not entirely clear is "which" field represents the key field.
- * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
- * just uses the ARM rates.
- */
-long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
-{
-	const struct prcm_config *ptr;
-	long highest_rate;
-	long sys_ck_rate;
-
-	sys_ck_rate = clk_get_rate(sclk);
-
-	highest_rate = -EINVAL;
-
-	for (ptr = rate_table; ptr->mpu_speed; ptr++) {
-		if (!(ptr->flags & cpu_mask))
-			continue;
-		if (ptr->xtal_speed != sys_ck_rate)
-			continue;
-
-		highest_rate = ptr->mpu_speed;
-
-		/* Can check only after xtal frequency check */
-		if (ptr->mpu_speed <= rate)
-			break;
-	}
-	return highest_rate;
-}
-
-/* Sets basic clocks based on the specified rate */
-int omap2_select_table_rate(struct clk *clk, unsigned long rate)
-{
-	u32 cur_rate, done_rate, bypass = 0, tmp;
-	const struct prcm_config *prcm;
-	unsigned long found_speed = 0;
-	unsigned long flags;
-	long sys_ck_rate;
-
-	sys_ck_rate = clk_get_rate(sclk);
-
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-
-		if (prcm->xtal_speed != sys_ck_rate)
-			continue;
-
-		if (prcm->mpu_speed <= rate) {
-			found_speed = prcm->mpu_speed;
-			break;
-		}
-	}
-
-	if (!found_speed) {
-		printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
-		       rate / 1000000);
-		return -EINVAL;
-	}
-
-	curr_prcm_set = prcm;
-	cur_rate = omap2xxx_clk_get_core_rate(dclk);
-
-	if (prcm->dpll_speed == cur_rate / 2) {
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
-	} else if (prcm->dpll_speed == cur_rate * 2) {
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-	} else if (prcm->dpll_speed != cur_rate) {
-		local_irq_save(flags);
-
-		if (prcm->dpll_speed == prcm->xtal_speed)
-			bypass = 1;
-
-		if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) ==
-		    CORE_CLK_SRC_DPLL_X2)
-			done_rate = CORE_CLK_SRC_DPLL_X2;
-		else
-			done_rate = CORE_CLK_SRC_DPLL;
-
-		/* MPU divider */
-		cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
-
-		/* dsp + iva1 div(2420), iva2.1(2430) */
-		cm_write_mod_reg(prcm->cm_clksel_dsp,
-				 OMAP24XX_DSP_MOD, CM_CLKSEL);
-
-		cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
-
-		/* Major subsystem dividers */
-		tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
-		cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
-				 CM_CLKSEL1);
-
-		if (cpu_is_omap2430())
-			cm_write_mod_reg(prcm->cm_clksel_mdm,
-					 OMAP2430_MDM_MOD, CM_CLKSEL);
-
-		/* x2 to enter omap2xxx_sdrc_init_params() */
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-
-		omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
-			       bypass);
-
-		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
-		omap2xxx_sdrc_reprogram(done_rate, 0);
-
-		local_irq_restore(flags);
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_CPU_FREQ
 /*
- * Walk PRCM rate table and fillout cpufreq freq_table
- * XXX This should be replaced by an OPP layer in the near future
+ * Omap24xx specific clock functions
  */
-static struct cpufreq_frequency_table *freq_table;
-
-void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-	const struct prcm_config *prcm;
-	long sys_ck_rate;
-	int i = 0;
-	int tbl_sz = 0;
-
-	sys_ck_rate = clk_get_rate(sclk);
-
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sys_ck_rate)
-			continue;
-
-		/* don't put bypass rates in table */
-		if (prcm->dpll_speed == prcm->xtal_speed)
-			continue;
-
-		tbl_sz++;
-	}
-
-	/*
-	 * XXX Ensure that we're doing what CPUFreq expects for this error
-	 * case and the following one
-	 */
-	if (tbl_sz == 0) {
-		pr_warning("%s: no matching entries in rate_table\n",
-			   __func__);
-		return;
-	}
-
-	/* Include the CPUFREQ_TABLE_END terminator entry */
-	tbl_sz++;
-
-	freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
-			     GFP_ATOMIC);
-	if (!freq_table) {
-		pr_err("%s: could not kzalloc frequency table\n", __func__);
-		return;
-	}
-
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sys_ck_rate)
-			continue;
-
-		/* don't put bypass rates in table */
-		if (prcm->dpll_speed == prcm->xtal_speed)
-			continue;
-
-		freq_table[i].index = i;
-		freq_table[i].frequency = prcm->mpu_speed / 1000;
-		i++;
-	}
-
-	freq_table[i].index = i;
-	freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	*table = &freq_table[0];
-}
-
-void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-	kfree(freq_table);
-}
-
-#endif
-
-struct clk_functions omap2_clk_functions = {
-	.clk_enable		= omap2_clk_enable,
-	.clk_disable		= omap2_clk_disable,
-	.clk_round_rate		= omap2_clk_round_rate,
-	.clk_set_rate		= omap2_clk_set_rate,
-	.clk_set_parent		= omap2_clk_set_parent,
-	.clk_disable_unused	= omap2_clk_disable_unused,
-#ifdef	CONFIG_CPU_FREQ
-	.clk_init_cpufreq_table	= omap2_clk_init_cpufreq_table,
-	.clk_exit_cpufreq_table	= omap2_clk_exit_cpufreq_table,
-#endif
-};
-
-static u32 omap2_get_apll_clkin(void)
-{
-	u32 aplls, srate = 0;
-
-	aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
-	aplls &= OMAP24XX_APLLS_CLKIN_MASK;
-	aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
-
-	if (aplls == APLLS_CLKIN_19_2MHZ)
-		srate = 19200000;
-	else if (aplls == APLLS_CLKIN_13MHZ)
-		srate = 13000000;
-	else if (aplls == APLLS_CLKIN_12MHZ)
-		srate = 12000000;
-
-	return srate;
-}
-
-static u32 omap2_get_sysclkdiv(void)
-{
-	u32 div;
-
-	div = __raw_readl(prcm_clksrc_ctrl);
-	div &= OMAP_SYSCLKDIV_MASK;
-	div >>= OMAP_SYSCLKDIV_SHIFT;
-
-	return div;
-}
-
-unsigned long omap2_osc_clk_recalc(struct clk *clk)
-{
-	return omap2_get_apll_clkin() * omap2_get_sysclkdiv();
-}
-
-unsigned long omap2_sys_clk_recalc(struct clk *clk)
-{
-	return clk->parent->rate / omap2_get_sysclkdiv();
-}
 
 /*
  * Set clocks for bypass mode for reboot to work.
  */
-void omap2_clk_prepare_for_reboot(void)
+void omap2xxx_clk_prepare_for_reboot(void)
 {
 	u32 rate;
 
@@ -590,37 +50,24 @@ void omap2_clk_prepare_for_reboot(void)
 }
 
 /*
- * Switch the MPU rate if specified on cmdline.
- * We cannot do this early until cmdline is parsed.
+ * Switch the MPU rate if specified on cmdline.  We cannot do this
+ * early until cmdline is parsed.  XXX This should be removed from the
+ * clock code and handled by the OPP layer code in the near future.
  */
-static int __init omap2_clk_arch_init(void)
+static int __init omap2xxx_clk_arch_init(void)
 {
-	struct clk *virt_prcm_set, *sys_ck, *dpll_ck, *mpu_ck;
-	unsigned long sys_ck_rate;
+	int ret;
 
-	if (!mpurate)
-		return -EINVAL;
+	if (!cpu_is_omap24xx())
+		return 0;
 
-	virt_prcm_set = clk_get(NULL, "virt_prcm_set");
-	sys_ck = clk_get(NULL, "sys_ck");
-	dpll_ck = clk_get(NULL, "dpll_ck");
-	mpu_ck = clk_get(NULL, "mpu_ck");
+	ret = omap2_clk_switch_mpurate_at_boot("virt_prcm_set");
+	if (!ret)
+		omap2_clk_print_new_rates("sys_ck", "dpll_ck", "mpu_ck");
 
-	if (clk_set_rate(virt_prcm_set, mpurate))
-		printk(KERN_ERR "Could not find matching MPU rate\n");
-
-	recalculate_root_clocks();
-
-	sys_ck_rate = clk_get_rate(sys_ck);
-
-	pr_info("Switched to new clocking rate (Crystal/DPLL/MPU): "
-		"%ld.%01ld/%ld/%ld MHz\n",
-		(sys_ck_rate / 1000000), (sys_ck_rate / 100000) % 10,
-		(clk_get_rate(dpll_ck) / 1000000),
-		(clk_get_rate(mpu_ck) / 1000000));
-
-	return 0;
+	return ret;
 }
-arch_initcall(omap2_clk_arch_init);
+
+arch_initcall(omap2xxx_clk_arch_init);
 
 

arch/arm/mach-omap2/clock2xxx.h

@@ -1,35 +1,38 @@
 /*
  * OMAP2 clock function prototypes and macros
  *
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
- * Copyright (C) 2004-2009 Nokia Corporation
+ * Copyright (C) 2005-2010 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
  */
 
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_24XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK_24XX_H
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK2XXX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK2XXX_H
 
 unsigned long omap2_table_mpu_recalc(struct clk *clk);
 int omap2_select_table_rate(struct clk *clk, unsigned long rate);
 long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
-unsigned long omap2_sys_clk_recalc(struct clk *clk);
+unsigned long omap2xxx_sys_clk_recalc(struct clk *clk);
 unsigned long omap2_osc_clk_recalc(struct clk *clk);
-unsigned long omap2_sys_clk_recalc(struct clk *clk);
 unsigned long omap2_dpllcore_recalc(struct clk *clk);
 int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
 unsigned long omap2xxx_clk_get_core_rate(struct clk *clk);
+u32 omap2xxx_get_apll_clkin(void);
+u32 omap2xxx_get_sysclkdiv(void);
+void omap2xxx_clk_prepare_for_reboot(void);
 
-/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */
 #ifdef CONFIG_ARCH_OMAP2420
-#define OMAP_CM_REGADDR			OMAP2420_CM_REGADDR
-#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP2420_PRCM_CLKOUT_CTRL
-#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP2420_PRCM_CLKEMUL_CTRL
+int omap2420_clk_init(void);
 #else
-#define OMAP_CM_REGADDR			OMAP2430_CM_REGADDR
-#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP2430_PRCM_CLKOUT_CTRL
-#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP2430_PRCM_CLKEMUL_CTRL
+#define omap2420_clk_init()	0
 #endif
 
-extern void __iomem *prcm_clksrc_ctrl;
+#ifdef CONFIG_ARCH_OMAP2430
+int omap2430_clk_init(void);
+#else
+#define omap2430_clk_init()	0
+#endif
+
+extern void __iomem *prcm_clksrc_ctrl, *cm_idlest_pll;
 
 extern struct clk *dclk;
 

arch/arm/mach-omap2/clock34xx.c

@@ -2,13 +2,14 @@
  * OMAP3-specific clock framework functions
  *
  * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
+ * Copyright (C) 2007-2010 Nokia Corporation
  *
- * Written by Paul Walmsley
- * Testing and integration fixes by Jouni Högander
+ * Paul Walmsley
+ * Jouni Högander
  *
  * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
+ * Russell King
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -16,49 +17,23 @@
  */
 #undef DEBUG
 
-#include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <linux/limits.h>
-#include <linux/bitops.h>
 
-#include <plat/cpu.h>
 #include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
-#include <asm/div64.h>
-#include <asm/clkdev.h>
 
 #include "clock.h"
 #include "clock34xx.h"
-#include "sdrc.h"
-#include "prm.h"
-#include "prm-regbits-34xx.h"
 #include "cm.h"
 #include "cm-regbits-34xx.h"
 
-#define CYCLES_PER_MHZ			1000000
-
-/*
- * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
- * that are sourced by DPLL5, and both of these require this clock
- * to be at 120 MHz for proper operation.
- */
-#define DPLL5_FREQ_FOR_USBHOST		120000000
-
-/* needed by omap3_core_dpll_m2_set_rate() */
-struct clk *sdrc_ick_p, *arm_fck_p;
-
 /**
  * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
  * @clk: struct clk * being enabled
  * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
  * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
  *
  * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
  * from the CM_{I,F}CLKEN bit.  Pass back the correct info via
@@ -66,13 +41,15 @@ struct clk *sdrc_ick_p, *arm_fck_p;
  */
 static void omap3430es2_clk_ssi_find_idlest(struct clk *clk,
 					    void __iomem **idlest_reg,
-					    u8 *idlest_bit)
+					    u8 *idlest_bit,
+					    u8 *idlest_val)
 {
 	u32 r;
 
 	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
 	*idlest_reg = (__force void __iomem *)r;
 	*idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
+	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
 }
 
 const struct clkops clkops_omap3430es2_ssi_wait = {
@@ -87,6 +64,7 @@ const struct clkops clkops_omap3430es2_ssi_wait = {
  * @clk: struct clk * being enabled
  * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
  * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
  *
  * Some OMAP modules on OMAP3 ES2+ chips have both initiator and
  * target IDLEST bits.  For our purposes, we are concerned with the
@@ -97,7 +75,8 @@ const struct clkops clkops_omap3430es2_ssi_wait = {
  */
 static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
 						    void __iomem **idlest_reg,
-						    u8 *idlest_bit)
+						    u8 *idlest_bit,
+						    u8 *idlest_val)
 {
 	u32 r;
 
@@ -105,6 +84,7 @@ static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
 	*idlest_reg = (__force void __iomem *)r;
 	/* USBHOST_IDLE has same shift */
 	*idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
+	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
 }
 
 const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
@@ -119,6 +99,7 @@ const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
  * @clk: struct clk * being enabled
  * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
  * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
  *
  * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
  * shift from the CM_{I,F}CLKEN bit.  Pass back the correct info via
@@ -126,13 +107,15 @@ const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
  */
 static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk,
 						 void __iomem **idlest_reg,
-						 u8 *idlest_bit)
+						 u8 *idlest_bit,
+						 u8 *idlest_val)
 {
 	u32 r;
 
 	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
 	*idlest_reg = (__force void __iomem *)r;
 	*idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
+	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
 }
 
 const struct clkops clkops_omap3430es2_hsotgusb_wait = {
@@ -141,213 +124,3 @@ const struct clkops clkops_omap3430es2_hsotgusb_wait = {
 	.find_idlest	= omap3430es2_clk_hsotgusb_find_idlest,
 	.find_companion = omap2_clk_dflt_find_companion,
 };
-
-const struct clkops clkops_noncore_dpll_ops = {
-	.enable		= omap3_noncore_dpll_enable,
-	.disable	= omap3_noncore_dpll_disable,
-};
-
-int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
-{
-	/*
-	 * According to the 12-5 CDP code from TI, "Limitation 2.5"
-	 * on 3430ES1 prevents us from changing DPLL multipliers or dividers
-	 * on DPLL4.
-	 */
-	if (omap_rev() == OMAP3430_REV_ES1_0) {
-		printk(KERN_ERR "clock: DPLL4 cannot change rate due to "
-		       "silicon 'Limitation 2.5' on 3430ES1.\n");
-		return -EINVAL;
-	}
-	return omap3_noncore_dpll_set_rate(clk, rate);
-}
-
-
-/*
- * CORE DPLL (DPLL3) rate programming functions
- *
- * These call into SRAM code to do the actual CM writes, since the SDRAM
- * is clocked from DPLL3.
- */
-
-/**
- * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider
- * @clk: struct clk * of DPLL to set
- * @rate: rounded target rate
- *
- * Program the DPLL M2 divider with the rounded target rate.  Returns
- * -EINVAL upon error, or 0 upon success.
- */
-int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 new_div = 0;
-	u32 unlock_dll = 0;
-	u32 c;
-	unsigned long validrate, sdrcrate, _mpurate;
-	struct omap_sdrc_params *sdrc_cs0;
-	struct omap_sdrc_params *sdrc_cs1;
-	int ret;
-
-	if (!clk || !rate)
-		return -EINVAL;
-
-	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
-	if (validrate != rate)
-		return -EINVAL;
-
-	sdrcrate = sdrc_ick_p->rate;
-	if (rate > clk->rate)
-		sdrcrate <<= ((rate / clk->rate) >> 1);
-	else
-		sdrcrate >>= ((clk->rate / rate) >> 1);
-
-	ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
-	if (ret)
-		return -EINVAL;
-
-	if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
-		pr_debug("clock: will unlock SDRC DLL\n");
-		unlock_dll = 1;
-	}
-
-	/*
-	 * XXX This only needs to be done when the CPU frequency changes
-	 */
-	_mpurate = arm_fck_p->rate / CYCLES_PER_MHZ;
-	c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
-	c += 1;  /* for safety */
-	c *= SDRC_MPURATE_LOOPS;
-	c >>= SDRC_MPURATE_SCALE;
-	if (c == 0)
-		c = 1;
-
-	pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
-		 validrate);
-	pr_debug("clock: SDRC CS0 timing params used:"
-		 " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
-		 sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
-		 sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
-	if (sdrc_cs1)
-		pr_debug("clock: SDRC CS1 timing params used: "
-		 " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
-		 sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
-		 sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
-
-	if (sdrc_cs1)
-		omap3_configure_core_dpll(
-				  new_div, unlock_dll, c, rate > clk->rate,
-				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
-				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
-				  sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
-				  sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
-	else
-		omap3_configure_core_dpll(
-				  new_div, unlock_dll, c, rate > clk->rate,
-				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
-				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
-				  0, 0, 0, 0);
-
-	return 0;
-}
-
-/* Common clock code */
-
-/*
- * As it is structured now, this will prevent an OMAP2/3 multiboot
- * kernel from compiling.  This will need further attention.
- */
-#if defined(CONFIG_ARCH_OMAP3)
-
-struct clk_functions omap2_clk_functions = {
-	.clk_enable		= omap2_clk_enable,
-	.clk_disable		= omap2_clk_disable,
-	.clk_round_rate		= omap2_clk_round_rate,
-	.clk_set_rate		= omap2_clk_set_rate,
-	.clk_set_parent		= omap2_clk_set_parent,
-	.clk_disable_unused	= omap2_clk_disable_unused,
-};
-
-/*
- * Set clocks for bypass mode for reboot to work.
- */
-void omap2_clk_prepare_for_reboot(void)
-{
-	/* REVISIT: Not ready for 343x */
-#if 0
-	u32 rate;
-
-	if (vclk == NULL || sclk == NULL)
-		return;
-
-	rate = clk_get_rate(sclk);
-	clk_set_rate(vclk, rate);
-#endif
-}
-
-void omap3_clk_lock_dpll5(void)
-{
-	struct clk *dpll5_clk;
-	struct clk *dpll5_m2_clk;
-
-	dpll5_clk = clk_get(NULL, "dpll5_ck");
-	clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
-	clk_enable(dpll5_clk);
-
-	/* Enable autoidle to allow it to enter low power bypass */
-	omap3_dpll_allow_idle(dpll5_clk);
-
-	/* Program dpll5_m2_clk divider for no division */
-	dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
-	clk_enable(dpll5_m2_clk);
-	clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
-
-	clk_disable(dpll5_m2_clk);
-	clk_disable(dpll5_clk);
-	return;
-}
-
-/* REVISIT: Move this init stuff out into clock.c */
-
-/*
- * Switch the MPU rate if specified on cmdline.
- * We cannot do this early until cmdline is parsed.
- */
-static int __init omap2_clk_arch_init(void)
-{
-	struct clk *osc_sys_ck, *dpll1_ck, *arm_fck, *core_ck;
-	unsigned long osc_sys_rate;
-
-	if (!mpurate)
-		return -EINVAL;
-
-	/* XXX test these for success */
-	dpll1_ck = clk_get(NULL, "dpll1_ck");
-	arm_fck = clk_get(NULL, "arm_fck");
-	core_ck = clk_get(NULL, "core_ck");
-	osc_sys_ck = clk_get(NULL, "osc_sys_ck");
-
-	/* REVISIT: not yet ready for 343x */
-	if (clk_set_rate(dpll1_ck, mpurate))
-		printk(KERN_ERR "*** Unable to set MPU rate\n");
-
-	recalculate_root_clocks();
-
-	osc_sys_rate = clk_get_rate(osc_sys_ck);
-
-	pr_info("Switched to new clocking rate (Crystal/Core/MPU): "
-		"%ld.%01ld/%ld/%ld MHz\n",
-		(osc_sys_rate / 1000000),
-		((osc_sys_rate / 100000) % 10),
-		(clk_get_rate(core_ck) / 1000000),
-		(clk_get_rate(arm_fck) / 1000000));
-
-	calibrate_delay();
-
-	return 0;
-}
-arch_initcall(omap2_clk_arch_init);
-
-
-#endif
-
-

arch/arm/mach-omap2/clock34xx.h

@@ -1,24 +1,15 @@
 /*
- * OMAP3 clock function prototypes and macros
+ * OMAP34xx clock function prototypes and macros
  *
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
  */
 
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_34XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK_34XX_H
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
 
-int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate);
-int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
-void omap3_clk_lock_dpll5(void);
-
-extern struct clk *sdrc_ick_p;
-extern struct clk *arm_fck_p;
-
-/* OMAP34xx-specific clkops */
 extern const struct clkops clkops_omap3430es2_ssi_wait;
 extern const struct clkops clkops_omap3430es2_hsotgusb_wait;
 extern const struct clkops clkops_omap3430es2_dss_usbhost_wait;
-extern const struct clkops clkops_noncore_dpll_ops;
 
 #endif

arch/arm/mach-omap2/clock3517.c

@@ -0,0 +1,124 @@
+/*
+ * OMAP3517/3505-specific clock framework functions
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Ranjith Lohithakshan
+ * Paul Walmsley
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
+ * Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "clock3517.h"
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+
+/*
+ * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
+ * in the same register at a bit offset of 0x8. The EN_ACK for ICK is
+ * at an offset of 4 from ICK enable bit.
+ */
+#define AM35XX_IPSS_ICK_MASK			0xF
+#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 		0x4
+#define AM35XX_IPSS_ICK_FCK_OFFSET		0x8
+#define AM35XX_IPSS_CLK_IDLEST_VAL		0
+
+/**
+ * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The interface clocks on AM35xx IPSS reflects the clock idle status
+ * in the enable register itsel at a bit offset of 4 from the enable
+ * bit. A value of 1 indicates that clock is enabled.
+ */
+static void am35xx_clk_find_idlest(struct clk *clk,
+					    void __iomem **idlest_reg,
+					    u8 *idlest_bit,
+					    u8 *idlest_val)
+{
+	*idlest_reg = (__force void __iomem *)(clk->enable_reg);
+	*idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
+	*idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
+}
+
+/**
+ * am35xx_clk_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
+ *
+ * Some clocks don't have companion clocks.  For example, modules with
+ * only an interface clock (such as HECC) don't have a companion
+ * clock.  Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active.  Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts.  No return value.
+ */
+static void am35xx_clk_find_companion(struct clk *clk, void __iomem **other_reg,
+					    u8 *other_bit)
+{
+	*other_reg = (__force void __iomem *)(clk->enable_reg);
+	if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
+		*other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
+	else
+		*other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
+}
+
+const struct clkops clkops_am35xx_ipss_module_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= am35xx_clk_find_idlest,
+	.find_companion	= am35xx_clk_find_companion,
+};
+
+/**
+ * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The IPSS target CM_IDLEST bit is at a different shift from the
+ * CM_{I,F}CLKEN bit.  Pass back the correct info via @idlest_reg
+ * and @idlest_bit.  No return value.
+ */
+static void am35xx_clk_ipss_find_idlest(struct clk *clk,
+					    void __iomem **idlest_reg,
+					    u8 *idlest_bit,
+					    u8 *idlest_val)
+{
+	u32 r;
+
+	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+	*idlest_reg = (__force void __iomem *)r;
+	*idlest_bit = AM35XX_ST_IPSS_SHIFT;
+	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clkops clkops_am35xx_ipss_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= am35xx_clk_ipss_find_idlest,
+	.find_companion	= omap2_clk_dflt_find_companion,
+};
+
+

arch/arm/mach-omap2/clock3517.h

@@ -0,0 +1,14 @@
+/*
+ * OMAP3517/3505 clock function prototypes and macros
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK3517_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK3517_H
+
+extern const struct clkops clkops_am35xx_ipss_module_wait;
+extern const struct clkops clkops_am35xx_ipss_wait;
+
+#endif

arch/arm/mach-omap2/clock36xx.c

@@ -0,0 +1,72 @@
+/*
+ * OMAP36xx-specific clkops
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Mike Turquette
+ * Vijaykumar GN
+ * Paul Walmsley
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
+ * Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "clock36xx.h"
+
+
+/**
+ * omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering
+ *         from HSDivider PWRDN problem Implements Errata ID: i556.
+ * @clk: DPLL output struct clk
+ *
+ * 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
+ * dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset
+ * valueafter their respective PWRDN bits are set.  Any dummy write
+ * (Any other value different from the Read value) to the
+ * corresponding CM_CLKSEL register will refresh the dividers.
+ */
+static int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk *clk)
+{
+	u32 dummy_v, orig_v, clksel_shift;
+	int ret;
+
+	/* Clear PWRDN bit of HSDIVIDER */
+	ret = omap2_dflt_clk_enable(clk);
+
+	/* Restore the dividers */
+	if (!ret) {
+		clksel_shift = __ffs(clk->parent->clksel_mask);
+		orig_v = __raw_readl(clk->parent->clksel_reg);
+		dummy_v = orig_v;
+
+		/* Write any other value different from the Read value */
+		dummy_v ^= (1 << clksel_shift);
+		__raw_writel(dummy_v, clk->parent->clksel_reg);
+
+		/* Write the original divider */
+		__raw_writel(orig_v, clk->parent->clksel_reg);
+	}
+
+	return ret;
+}
+
+const struct clkops clkops_omap36xx_pwrdn_with_hsdiv_wait_restore = {
+	.enable		= omap36xx_pwrdn_clk_enable_with_hsdiv_restore,
+	.disable	= omap2_dflt_clk_disable,
+	.find_companion	= omap2_clk_dflt_find_companion,
+	.find_idlest	= omap2_clk_dflt_find_idlest,
+};

arch/arm/mach-omap2/clock36xx.h

@@ -0,0 +1,13 @@
+/*
+ * OMAP36xx clock function prototypes and macros
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
+
+extern const struct clkops clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
+
+#endif

arch/arm/mach-omap2/clock3xxx.c

@@ -0,0 +1,104 @@
+/*
+ * OMAP3-specific clock framework functions
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ *
+ * Paul Walmsley
+ * Jouni Högander
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/clock.h>
+
+#include "clock.h"
+#include "clock3xxx.h"
+#include "prm.h"
+#include "prm-regbits-34xx.h"
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+
+/*
+ * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
+ * that are sourced by DPLL5, and both of these require this clock
+ * to be at 120 MHz for proper operation.
+ */
+#define DPLL5_FREQ_FOR_USBHOST		120000000
+
+/* needed by omap3_core_dpll_m2_set_rate() */
+struct clk *sdrc_ick_p, *arm_fck_p;
+
+int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
+{
+	/*
+	 * According to the 12-5 CDP code from TI, "Limitation 2.5"
+	 * on 3430ES1 prevents us from changing DPLL multipliers or dividers
+	 * on DPLL4.
+	 */
+	if (omap_rev() == OMAP3430_REV_ES1_0) {
+		pr_err("clock: DPLL4 cannot change rate due to "
+		       "silicon 'Limitation 2.5' on 3430ES1.\n");
+		return -EINVAL;
+	}
+
+	return omap3_noncore_dpll_set_rate(clk, rate);
+}
+
+void __init omap3_clk_lock_dpll5(void)
+{
+	struct clk *dpll5_clk;
+	struct clk *dpll5_m2_clk;
+
+	dpll5_clk = clk_get(NULL, "dpll5_ck");
+	clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
+	clk_enable(dpll5_clk);
+
+	/* Enable autoidle to allow it to enter low power bypass */
+	omap3_dpll_allow_idle(dpll5_clk);
+
+	/* Program dpll5_m2_clk divider for no division */
+	dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
+	clk_enable(dpll5_m2_clk);
+	clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
+
+	clk_disable(dpll5_m2_clk);
+	clk_disable(dpll5_clk);
+	return;
+}
+
+/* Common clock code */
+
+/*
+ * Switch the MPU rate if specified on cmdline.  We cannot do this
+ * early until cmdline is parsed.  XXX This should be removed from the
+ * clock code and handled by the OPP layer code in the near future.
+ */
+static int __init omap3xxx_clk_arch_init(void)
+{
+	int ret;
+
+	if (!cpu_is_omap34xx())
+		return 0;
+
+	ret = omap2_clk_switch_mpurate_at_boot("dpll1_ck");
+	if (!ret)
+		omap2_clk_print_new_rates("osc_sys_ck", "arm_fck", "core_ck");
+
+	return ret;
+}
+
+arch_initcall(omap3xxx_clk_arch_init);
+
+

arch/arm/mach-omap2/clock3xxx.h

@@ -0,0 +1,21 @@
+/*
+ * OMAP3-common clock function prototypes and macros
+ *
+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK3XXX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK3XXX_H
+
+int omap3xxx_clk_init(void);
+int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate);
+int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
+void omap3_clk_lock_dpll5(void);
+
+extern struct clk *sdrc_ick_p;
+extern struct clk *arm_fck_p;
+
+extern const struct clkops clkops_noncore_dpll_ops;
+
+#endif

arch/arm/mach-omap2/clock44xx.c

@@ -1,33 +0,0 @@
-/*
- * OMAP4-specific clock framework functions
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- *
- * Rajendra Nayak (rnayak@ti.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/errno.h>
-#include "clock.h"
-
-struct clk_functions omap2_clk_functions = {
-	.clk_enable		= omap2_clk_enable,
-	.clk_disable		= omap2_clk_disable,
-	.clk_round_rate		= omap2_clk_round_rate,
-	.clk_set_rate		= omap2_clk_set_rate,
-	.clk_set_parent		= omap2_clk_set_parent,
-	.clk_disable_unused	= omap2_clk_disable_unused,
-};
-
-const struct clkops clkops_noncore_dpll_ops = {
-	.enable		= &omap3_noncore_dpll_enable,
-	.disable	= &omap3_noncore_dpll_disable,
-};
-
-void omap2_clk_prepare_for_reboot(void)
-{
-	return;
-}

arch/arm/mach-omap2/clock44xx.h

@@ -2,14 +2,19 @@
  * OMAP4 clock function prototypes and macros
  *
  * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
  */
 
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK_44XX_H
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
 
-#define OMAP4430_MAX_DPLL_MULT	2048
+/*
+ * XXX Missing values for the OMAP4 DPLL_USB
+ * XXX Missing min_multiplier values for all OMAP4 DPLLs
+ */
+#define OMAP4430_MAX_DPLL_MULT	2047
 #define OMAP4430_MAX_DPLL_DIV	128
 
-extern const struct clkops clkops_noncore_dpll_ops;
+int omap4xxx_clk_init(void);
 
 #endif

arch/arm/mach-omap2/clockdomains.h

@@ -1,16 +1,420 @@
 /*
  * OMAP2/3 clockdomains
  *
- * Copyright (C) 2008 Texas Instruments, Inc.
- * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
  *
- * Written by Paul Walmsley
+ * Written by Paul Walmsley and Jouni Högander
+ *
+ * This file contains clockdomains and clockdomain wakeup/sleep
+ * dependencies for the OMAP2/3 chips.  Some notes:
+ *
+ * A useful validation rule for struct clockdomain: Any clockdomain
+ * referenced by a wkdep_srcs or sleepdep_srcs array must have a
+ * dep_bit assigned.  So wkdep_srcs/sleepdep_srcs are really just
+ * software-controllable dependencies.  Non-software-controllable
+ * dependencies do exist, but they are not encoded below (yet).
+ *
+ * 24xx does not support programmable sleep dependencies (SLEEPDEP)
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}.  The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ *
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+/*
+ * To-Do List
+ * -> Port the Sleep/Wakeup dependencies for the domains
+ *    from the Power domain framework
  */
 
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H
 
 #include <plat/clockdomain.h>
+#include "cm.h"
+#include "prm.h"
+
+/*
+ * Clockdomain dependencies for wkdeps/sleepdeps
+ *
+ * XXX Hardware dependencies (e.g., dependencies that cannot be
+ * changed in software) are not included here yet, but should be.
+ */
+
+/* OMAP2/3-common wakeup dependencies */
+
+/*
+ * 2420/2430 PM_WKDEP_GFX: CORE, MPU, WKUP
+ * 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE
+ * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE
+ * These can share data since they will never be present simultaneously
+ * on the same device.
+ */
+static struct clkdm_dep gfx_sgx_wkdeps[] = {
+	{
+		.clkdm_name = "core_l3_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "core_l4_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "iva2_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
+					    CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "wkup_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
+					    CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+
+/* 24XX-specific possible dependencies */
+
+#ifdef CONFIG_ARCH_OMAP2
+
+/* Wakeup dependency source arrays */
+
+/* 2420/2430 PM_WKDEP_DSP: CORE, MPU, WKUP */
+static struct clkdm_dep dsp_24xx_wkdeps[] = {
+	{
+		.clkdm_name = "core_l3_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "core_l4_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "wkup_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{ NULL },
+};
+
+/*
+ * 2420 PM_WKDEP_MPU: CORE, DSP, WKUP
+ * 2430 adds MDM
+ */
+static struct clkdm_dep mpu_24xx_wkdeps[] = {
+	{
+		.clkdm_name = "core_l3_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "core_l4_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "dsp_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "wkup_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "mdm_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+	},
+	{ NULL },
+};
+
+/*
+ * 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP
+ * 2430 adds MDM
+ */
+static struct clkdm_dep core_24xx_wkdeps[] = {
+	{
+		.clkdm_name = "dsp_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "gfx_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "wkup_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "mdm_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+	},
+	{ NULL },
+};
+
+#endif
+
+
+/* 2430-specific possible wakeup dependencies */
+
+#ifdef CONFIG_ARCH_OMAP2430
+
+/* 2430 PM_WKDEP_MDM: CORE, MPU, WKUP */
+static struct clkdm_dep mdm_2430_wkdeps[] = {
+	{
+		.clkdm_name = "core_l3_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "core_l4_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{
+		.clkdm_name = "wkup_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
+	},
+	{ NULL },
+};
+
+#endif /* CONFIG_ARCH_OMAP2430 */
+
+
+/* OMAP3-specific possible dependencies */
+
+#ifdef CONFIG_ARCH_OMAP3
+
+/* 3430: PM_WKDEP_PER: CORE, IVA2, MPU, WKUP */
+static struct clkdm_dep per_wkdeps[] = {
+	{
+		.clkdm_name = "core_l3_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "core_l4_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "iva2_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "wkup_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+/* 3430ES2: PM_WKDEP_USBHOST: CORE, IVA2, MPU, WKUP */
+static struct clkdm_dep usbhost_wkdeps[] = {
+	{
+		.clkdm_name = "core_l3_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "core_l4_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "iva2_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "wkup_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+/* 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER */
+static struct clkdm_dep mpu_3xxx_wkdeps[] = {
+	{
+		.clkdm_name = "core_l3_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "core_l4_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "iva2_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "dss_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "per_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+/* 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER */
+static struct clkdm_dep iva2_wkdeps[] = {
+	{
+		.clkdm_name = "core_l3_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "core_l4_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "wkup_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "dss_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "per_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+
+/* 3430 PM_WKDEP_CAM: IVA2, MPU, WKUP */
+static struct clkdm_dep cam_wkdeps[] = {
+	{
+		.clkdm_name = "iva2_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "wkup_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+/* 3430 PM_WKDEP_DSS: IVA2, MPU, WKUP */
+static struct clkdm_dep dss_wkdeps[] = {
+	{
+		.clkdm_name = "iva2_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "wkup_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+/* 3430: PM_WKDEP_NEON: MPU */
+static struct clkdm_dep neon_wkdeps[] = {
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+
+/* Sleep dependency source arrays for OMAP3-specific clkdms */
+
+/* 3430: CM_SLEEPDEP_DSS: MPU, IVA */
+static struct clkdm_dep dss_sleepdeps[] = {
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "iva2_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+/* 3430: CM_SLEEPDEP_PER: MPU, IVA */
+static struct clkdm_dep per_sleepdeps[] = {
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "iva2_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+/* 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA */
+static struct clkdm_dep usbhost_sleepdeps[] = {
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{
+		.clkdm_name = "iva2_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+/* 3430: CM_SLEEPDEP_CAM: MPU */
+static struct clkdm_dep cam_sleepdeps[] = {
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+/*
+ * 3430ES1: CM_SLEEPDEP_GFX: MPU
+ * 3430ES2: CM_SLEEPDEP_SGX: MPU
+ * These can share data since they will never be present simultaneously
+ * on the same device.
+ */
+static struct clkdm_dep gfx_sgx_sleepdeps[] = {
+	{
+		.clkdm_name = "mpu_clkdm",
+		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	},
+	{ NULL },
+};
+
+#endif /* CONFIG_ARCH_OMAP3 */
+
 
 /*
  * OMAP2/3-common clockdomains
@@ -21,10 +425,13 @@
  * sys_clkout/sys_clkout2.
  */
 
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+
 /* This is an implicit clockdomain - it is never defined as such in TRM */
 static struct clockdomain wkup_clkdm = {
 	.name		= "wkup_clkdm",
 	.pwrdm		= { .name = "wkup_pwrdm" },
+	.dep_bit	= OMAP_EN_WKUP_SHIFT,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
 };
 
@@ -40,6 +447,8 @@ static struct clockdomain cm_clkdm = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
 };
 
+#endif
+
 /*
  * 2420-only clockdomains
  */
@@ -50,6 +459,8 @@ static struct clockdomain mpu_2420_clkdm = {
 	.name		= "mpu_clkdm",
 	.pwrdm		= { .name = "mpu_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
+	.clkstctrl_reg  = OMAP2420_CM_REGADDR(MPU_MOD, OMAP2_CM_CLKSTCTRL),
+	.wkdep_srcs	= mpu_24xx_wkdeps,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
 };
@@ -58,11 +469,64 @@ static struct clockdomain iva1_2420_clkdm = {
 	.name		= "iva1_clkdm",
 	.pwrdm		= { .name = "dsp_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg  = OMAP2420_CM_REGADDR(OMAP24XX_DSP_MOD,
+						 OMAP2_CM_CLKSTCTRL),
+	.dep_bit	= OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
+	.wkdep_srcs	= dsp_24xx_wkdeps,
 	.clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
 };
 
-#endif  /* CONFIG_ARCH_OMAP2420 */
+static struct clockdomain dsp_2420_clkdm = {
+	.name		= "dsp_clkdm",
+	.pwrdm		= { .name = "dsp_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg  = OMAP2420_CM_REGADDR(OMAP24XX_DSP_MOD,
+						 OMAP2_CM_CLKSTCTRL),
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+static struct clockdomain gfx_2420_clkdm = {
+	.name		= "gfx_clkdm",
+	.pwrdm		= { .name = "gfx_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg  = OMAP2420_CM_REGADDR(GFX_MOD, OMAP2_CM_CLKSTCTRL),
+	.wkdep_srcs	= gfx_sgx_wkdeps,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+static struct clockdomain core_l3_2420_clkdm = {
+	.name		= "core_l3_clkdm",
+	.pwrdm		= { .name = "core_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP,
+	.clkstctrl_reg  = OMAP2420_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
+	.wkdep_srcs	= core_24xx_wkdeps,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+static struct clockdomain core_l4_2420_clkdm = {
+	.name		= "core_l4_clkdm",
+	.pwrdm		= { .name = "core_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP,
+	.clkstctrl_reg  = OMAP2420_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
+	.wkdep_srcs	= core_24xx_wkdeps,
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+static struct clockdomain dss_2420_clkdm = {
+	.name		= "dss_clkdm",
+	.pwrdm		= { .name = "core_pwrdm" },
+	.flags		= CLKDM_CAN_HWSUP,
+	.clkstctrl_reg  = OMAP2420_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
+	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+#endif   /* CONFIG_ARCH_OMAP2420 */
 
 
 /*
@@ -75,80 +539,105 @@ static struct clockdomain mpu_2430_clkdm = {
 	.name		= "mpu_clkdm",
 	.pwrdm		= { .name = "mpu_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg  = OMAP2430_CM_REGADDR(MPU_MOD,
+						 OMAP2_CM_CLKSTCTRL),
+	.wkdep_srcs	= mpu_24xx_wkdeps,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
 };
 
+/* Another case of bit name collisions between several registers: EN_MDM */
 static struct clockdomain mdm_clkdm = {
 	.name		= "mdm_clkdm",
 	.pwrdm		= { .name = "mdm_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg  = OMAP2430_CM_REGADDR(OMAP2430_MDM_MOD,
+						 OMAP2_CM_CLKSTCTRL),
+	.dep_bit	= OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT,
+	.wkdep_srcs	= mdm_2430_wkdeps,
 	.clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
 };
 
-#endif    /* CONFIG_ARCH_OMAP2430 */
-
-
-/*
- * 24XX-only clockdomains
- */
-
-#if defined(CONFIG_ARCH_OMAP24XX)
-
-static struct clockdomain dsp_clkdm = {
+static struct clockdomain dsp_2430_clkdm = {
 	.name		= "dsp_clkdm",
 	.pwrdm		= { .name = "dsp_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg  = OMAP2430_CM_REGADDR(OMAP24XX_DSP_MOD,
+						 OMAP2_CM_CLKSTCTRL),
+	.dep_bit	= OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
+	.wkdep_srcs	= dsp_24xx_wkdeps,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
 };
 
-static struct clockdomain gfx_24xx_clkdm = {
+static struct clockdomain gfx_2430_clkdm = {
 	.name		= "gfx_clkdm",
 	.pwrdm		= { .name = "gfx_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg  = OMAP2430_CM_REGADDR(GFX_MOD, OMAP2_CM_CLKSTCTRL),
+	.wkdep_srcs	= gfx_sgx_wkdeps,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
 };
 
-static struct clockdomain core_l3_24xx_clkdm = {
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l3_2430_clkdm = {
 	.name		= "core_l3_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
+	.clkstctrl_reg  = OMAP2430_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
+	.dep_bit	= OMAP24XX_EN_CORE_SHIFT,
+	.wkdep_srcs	= core_24xx_wkdeps,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
 };
 
-static struct clockdomain core_l4_24xx_clkdm = {
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l4_2430_clkdm = {
 	.name		= "core_l4_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
+	.clkstctrl_reg  = OMAP2430_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
+	.dep_bit	= OMAP24XX_EN_CORE_SHIFT,
+	.wkdep_srcs	= core_24xx_wkdeps,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
 };
 
-static struct clockdomain dss_24xx_clkdm = {
+static struct clockdomain dss_2430_clkdm = {
 	.name		= "dss_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
+	.clkstctrl_reg  = OMAP2430_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
 };
 
-#endif   /* CONFIG_ARCH_OMAP24XX */
+#endif    /* CONFIG_ARCH_OMAP2430 */
 
 
 /*
- * 34xx clockdomains
+ * OMAP3 clockdomains
  */
 
-#if defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP3)
 
-static struct clockdomain mpu_34xx_clkdm = {
+static struct clockdomain mpu_3xxx_clkdm = {
 	.name		= "mpu_clkdm",
 	.pwrdm		= { .name = "mpu_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(MPU_MOD, OMAP2_CM_CLKSTCTRL),
+	.dep_bit	= OMAP3430_EN_MPU_SHIFT,
+	.wkdep_srcs	= mpu_3xxx_wkdeps,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
@@ -157,6 +646,9 @@ static struct clockdomain neon_clkdm = {
 	.name		= "neon_clkdm",
 	.pwrdm		= { .name = "neon_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(OMAP3430_NEON_MOD,
+						 OMAP2_CM_CLKSTCTRL),
+	.wkdep_srcs	= neon_wkdeps,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
@@ -165,6 +657,10 @@ static struct clockdomain iva2_clkdm = {
 	.name		= "iva2_clkdm",
 	.pwrdm		= { .name = "iva2_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(OMAP3430_IVA2_MOD,
+						 OMAP2_CM_CLKSTCTRL),
+	.dep_bit	= OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT,
+	.wkdep_srcs	= iva2_wkdeps,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
@@ -173,6 +669,9 @@ static struct clockdomain gfx_3430es1_clkdm = {
 	.name		= "gfx_clkdm",
 	.pwrdm		= { .name = "gfx_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(GFX_MOD, OMAP2_CM_CLKSTCTRL),
+	.wkdep_srcs	= gfx_sgx_wkdeps,
+	.sleepdep_srcs	= gfx_sgx_sleepdeps,
 	.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1),
 };
@@ -181,6 +680,10 @@ static struct clockdomain sgx_clkdm = {
 	.name		= "sgx_clkdm",
 	.pwrdm		= { .name = "sgx_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(OMAP3430ES2_SGX_MOD,
+						 OMAP2_CM_CLKSTCTRL),
+	.wkdep_srcs	= gfx_sgx_wkdeps,
+	.sleepdep_srcs	= gfx_sgx_sleepdeps,
 	.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
 };
@@ -196,30 +699,51 @@ static struct clockdomain d2d_clkdm = {
 	.name		= "d2d_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
 	.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
 
-static struct clockdomain core_l3_34xx_clkdm = {
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l3_3xxx_clkdm = {
 	.name		= "core_l3_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
+	.dep_bit	= OMAP3430_EN_CORE_SHIFT,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
 
-static struct clockdomain core_l4_34xx_clkdm = {
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l4_3xxx_clkdm = {
 	.name		= "core_l4_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
+	.dep_bit	= OMAP3430_EN_CORE_SHIFT,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
 
-static struct clockdomain dss_34xx_clkdm = {
+/* Another case of bit name collisions between several registers: EN_DSS */
+static struct clockdomain dss_3xxx_clkdm = {
 	.name		= "dss_clkdm",
 	.pwrdm		= { .name = "dss_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(OMAP3430_DSS_MOD,
+						 OMAP2_CM_CLKSTCTRL),
+	.dep_bit	= OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT,
+	.wkdep_srcs	= dss_wkdeps,
+	.sleepdep_srcs	= dss_sleepdeps,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
@@ -228,6 +752,10 @@ static struct clockdomain cam_clkdm = {
 	.name		= "cam_clkdm",
 	.pwrdm		= { .name = "cam_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(OMAP3430_CAM_MOD,
+						 OMAP2_CM_CLKSTCTRL),
+	.wkdep_srcs	= cam_wkdeps,
+	.sleepdep_srcs	= cam_sleepdeps,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
@@ -236,6 +764,10 @@ static struct clockdomain usbhost_clkdm = {
 	.name		= "usbhost_clkdm",
 	.pwrdm		= { .name = "usbhost_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(OMAP3430ES2_USBHOST_MOD,
+						 OMAP2_CM_CLKSTCTRL),
+	.wkdep_srcs	= usbhost_wkdeps,
+	.sleepdep_srcs	= usbhost_sleepdeps,
 	.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
 };
@@ -244,6 +776,11 @@ static struct clockdomain per_clkdm = {
 	.name		= "per_clkdm",
 	.pwrdm		= { .name = "per_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(OMAP3430_PER_MOD,
+						 OMAP2_CM_CLKSTCTRL),
+	.dep_bit	= OMAP3430_EN_PER_SHIFT,
+	.wkdep_srcs	= per_wkdeps,
+	.sleepdep_srcs	= per_sleepdeps,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
@@ -256,6 +793,8 @@ static struct clockdomain emu_clkdm = {
 	.name		= "emu_clkdm",
 	.pwrdm		= { .name = "emu_pwrdm" },
 	.flags		= /* CLKDM_CAN_ENABLE_AUTO |  */CLKDM_CAN_SWSUP,
+	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(OMAP3430_EMU_MOD,
+						 OMAP2_CM_CLKSTCTRL),
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
@@ -290,64 +829,70 @@ static struct clockdomain dpll5_clkdm = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
 };
 
-#endif   /* CONFIG_ARCH_OMAP34XX */
+#endif   /* CONFIG_ARCH_OMAP3 */
+
+#include "clockdomains44xx.h"
 
 /*
- * Clockdomain-powerdomain hwsup dependencies (34XX only)
+ * Clockdomain hwsup dependencies (OMAP3 only)
  */
 
-static struct clkdm_pwrdm_autodep clkdm_pwrdm_autodeps[] = {
+static struct clkdm_autodep clkdm_autodeps[] = {
 	{
-		.pwrdm	   = { .name = "mpu_pwrdm" },
+		.clkdm	   = { .name = "mpu_clkdm" },
 		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
 	},
 	{
-		.pwrdm	   = { .name = "iva2_pwrdm" },
+		.clkdm	   = { .name = "iva2_clkdm" },
 		.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
 	},
 	{
-		.pwrdm	   = { .name = NULL },
+		.clkdm	   = { .name = NULL },
 	}
 };
 
 /*
- *
+ * List of clockdomain pointers per platform
  */
 
 static struct clockdomain *clockdomains_omap[] = {
 
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	&wkup_clkdm,
 	&cm_clkdm,
 	&prm_clkdm,
+#endif
 
 #ifdef CONFIG_ARCH_OMAP2420
 	&mpu_2420_clkdm,
 	&iva1_2420_clkdm,
+	&dsp_2420_clkdm,
+	&gfx_2420_clkdm,
+	&core_l3_2420_clkdm,
+	&core_l4_2420_clkdm,
+	&dss_2420_clkdm,
 #endif
 
 #ifdef CONFIG_ARCH_OMAP2430
 	&mpu_2430_clkdm,
 	&mdm_clkdm,
+	&dsp_2430_clkdm,
+	&gfx_2430_clkdm,
+	&core_l3_2430_clkdm,
+	&core_l4_2430_clkdm,
+	&dss_2430_clkdm,
 #endif
 
-#ifdef CONFIG_ARCH_OMAP24XX
-	&dsp_clkdm,
-	&gfx_24xx_clkdm,
-	&core_l3_24xx_clkdm,
-	&core_l4_24xx_clkdm,
-	&dss_24xx_clkdm,
-#endif
-
-#ifdef CONFIG_ARCH_OMAP34XX
-	&mpu_34xx_clkdm,
+#ifdef CONFIG_ARCH_OMAP3
+	&mpu_3xxx_clkdm,
 	&neon_clkdm,
 	&iva2_clkdm,
 	&gfx_3430es1_clkdm,
 	&sgx_clkdm,
 	&d2d_clkdm,
-	&core_l3_34xx_clkdm,
-	&core_l4_34xx_clkdm,
-	&dss_34xx_clkdm,
+	&core_l3_3xxx_clkdm,
+	&core_l4_3xxx_clkdm,
+	&dss_3xxx_clkdm,
 	&cam_clkdm,
 	&usbhost_clkdm,
 	&per_clkdm,
@@ -359,6 +904,33 @@ static struct clockdomain *clockdomains_omap[] = {
 	&dpll5_clkdm,
 #endif
 
+#ifdef CONFIG_ARCH_OMAP4
+	&l4_cefuse_44xx_clkdm,
+	&l4_cfg_44xx_clkdm,
+	&tesla_44xx_clkdm,
+	&l3_gfx_44xx_clkdm,
+	&ivahd_44xx_clkdm,
+	&l4_secure_44xx_clkdm,
+	&l4_per_44xx_clkdm,
+	&abe_44xx_clkdm,
+	&l3_instr_44xx_clkdm,
+	&l3_init_44xx_clkdm,
+	&mpuss_44xx_clkdm,
+	&mpu0_44xx_clkdm,
+	&mpu1_44xx_clkdm,
+	&l3_emif_44xx_clkdm,
+	&l4_ao_44xx_clkdm,
+	&ducati_44xx_clkdm,
+	&l3_2_44xx_clkdm,
+	&l3_1_44xx_clkdm,
+	&l3_d2d_44xx_clkdm,
+	&iss_44xx_clkdm,
+	&l3_dss_44xx_clkdm,
+	&l4_wkup_44xx_clkdm,
+	&emu_sys_44xx_clkdm,
+	&l3_dma_44xx_clkdm,
+#endif
+
 	NULL,
 };
 

arch/arm/mach-omap2/clockdomains44xx.h

@@ -0,0 +1,250 @@
+/*
+ * OMAP4 Clock domains framework
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Abhijit Pagare (abhijitpagare@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * To-Do List
+ * -> Populate the Sleep/Wakeup dependencies for the domains
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS44XX_H
+
+#include <plat/clockdomain.h>
+
+#if defined(CONFIG_ARCH_OMAP4)
+
+static struct clockdomain l4_cefuse_44xx_clkdm = {
+	.name		  = "l4_cefuse_clkdm",
+	.pwrdm		  = { .name = "cefuse_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_CEFUSE_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l4_cfg_44xx_clkdm = {
+	.name		  = "l4_cfg_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_L4CFG_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain tesla_44xx_clkdm = {
+	.name		  = "tesla_clkdm",
+	.pwrdm		  = { .name = "tesla_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_TESLA_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_gfx_44xx_clkdm = {
+	.name		  = "l3_gfx_clkdm",
+	.pwrdm		  = { .name = "gfx_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_GFX_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain ivahd_44xx_clkdm = {
+	.name		  = "ivahd_clkdm",
+	.pwrdm		  = { .name = "ivahd_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_IVAHD_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l4_secure_44xx_clkdm = {
+	.name		  = "l4_secure_clkdm",
+	.pwrdm		  = { .name = "l4per_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_L4SEC_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l4_per_44xx_clkdm = {
+	.name		  = "l4_per_clkdm",
+	.pwrdm		  = { .name = "l4per_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_L4PER_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain abe_44xx_clkdm = {
+	.name		  = "abe_clkdm",
+	.pwrdm		  = { .name = "abe_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM1_ABE_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_instr_44xx_clkdm = {
+	.name		  = "l3_instr_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_L3INSTR_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_init_44xx_clkdm = {
+	.name		  = "l3_init_clkdm",
+	.pwrdm		  = { .name = "l3init_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_L3INIT_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain mpuss_44xx_clkdm = {
+	.name		  = "mpuss_clkdm",
+	.pwrdm		  = { .name = "mpu_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_MPU_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain mpu0_44xx_clkdm = {
+	.name		  = "mpu0_clkdm",
+	.pwrdm		  = { .name = "cpu0_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_PDA_CPU0_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain mpu1_44xx_clkdm = {
+	.name		  = "mpu1_clkdm",
+	.pwrdm		  = { .name = "cpu1_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_PDA_CPU1_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_emif_44xx_clkdm = {
+	.name		  = "l3_emif_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_MEMIF_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l4_ao_44xx_clkdm = {
+	.name		  = "l4_ao_clkdm",
+	.pwrdm		  = { .name = "always_on_core_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_ALWON_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain ducati_44xx_clkdm = {
+	.name		  = "ducati_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_DUCATI_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_2_44xx_clkdm = {
+	.name		  = "l3_2_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_L3_2_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_1_44xx_clkdm = {
+	.name		  = "l3_1_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_L3_1_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_d2d_44xx_clkdm = {
+	.name		  = "l3_d2d_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_D2D_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain iss_44xx_clkdm = {
+	.name		  = "iss_clkdm",
+	.pwrdm		  = { .name = "cam_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_CAM_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_dss_44xx_clkdm = {
+	.name		  = "l3_dss_clkdm",
+	.pwrdm		  = { .name = "dss_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_DSS_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l4_wkup_44xx_clkdm = {
+	.name		  = "l4_wkup_clkdm",
+	.pwrdm		  = { .name = "wkup_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_WKUP_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain emu_sys_44xx_clkdm = {
+	.name		  = "emu_sys_clkdm",
+	.pwrdm		  = { .name = "emu_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_EMU_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct clockdomain l3_dma_44xx_clkdm = {
+	.name		  = "l3_dma_clkdm",
+	.pwrdm		  = { .name = "core_pwrdm" },
+	.clkstctrl_reg	  = OMAP4430_CM_SDMA_CLKSTCTRL,
+	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+#endif
+
+#endif

arch/arm/mach-omap2/cm-regbits-34xx.h

@@ -55,7 +55,7 @@
 /* Bits specific to each register */
 
 /* CM_FCLKEN_IVA2 */
-#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2			(1 << 0)
+#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK		(1 << 0)
 #define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT		0
 
 /* CM_CLKEN_PLL_IVA2 */
@@ -168,6 +168,12 @@
 #define OMAP3430_EN_SDRC				(1 << 1)
 #define OMAP3430_EN_SDRC_SHIFT				1
 
+/* AM35XX specific CM_ICLKEN1_CORE bits */
+#define AM35XX_EN_IPSS_MASK				(1 << 4)
+#define AM35XX_EN_IPSS_SHIFT				4
+#define AM35XX_EN_UART4_MASK			(1 << 23)
+#define AM35XX_EN_UART4_SHIFT				23
+
 /* CM_ICLKEN2_CORE */
 #define OMAP3430_EN_PKA					(1 << 4)
 #define OMAP3430_EN_PKA_SHIFT				4
@@ -220,6 +226,10 @@
 #define OMAP3430_ST_SSI_STDBY_SHIFT			0
 #define OMAP3430_ST_SSI_STDBY_MASK			(1 << 0)
 
+/* AM35xx specific CM_IDLEST1_CORE bits */
+#define AM35XX_ST_IPSS_SHIFT				5
+#define AM35XX_ST_IPSS_MASK 				(1 << 5)
+
 /* CM_IDLEST2_CORE */
 #define OMAP3430_ST_PKA_SHIFT				4
 #define OMAP3430_ST_PKA_MASK				(1 << 4)
@@ -336,6 +346,8 @@
 #define OMAP3430_CLKSEL_L4_MASK				(0x3 << 2)
 #define OMAP3430_CLKSEL_L3_SHIFT			0
 #define OMAP3430_CLKSEL_L3_MASK				(0x3 << 0)
+#define OMAP3630_CLKSEL_96M_SHIFT			12
+#define OMAP3630_CLKSEL_96M_MASK			(0x3 << 12)
 
 /* CM_CLKSTCTRL_CORE */
 #define OMAP3430ES1_CLKTRCTRL_D2D_SHIFT			4
@@ -379,6 +391,10 @@
 #define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT		1
 #define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_MASK		(1 << 1)
 
+/* CM_IDLEST_SGX */
+#define OMAP3430ES2_ST_SGX_SHIFT			1
+#define OMAP3430ES2_ST_SGX_MASK				(1 << 1)
+
 /* CM_ICLKEN_SGX */
 #define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT		0
 #define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_MASK		(1 << 0)
@@ -517,12 +533,18 @@
 /* CM_CLKSEL2_PLL */
 #define OMAP3430_PERIPH_DPLL_MULT_SHIFT			8
 #define OMAP3430_PERIPH_DPLL_MULT_MASK			(0x7ff << 8)
+#define OMAP3630_PERIPH_DPLL_MULT_MASK			(0xfff << 8)
 #define OMAP3430_PERIPH_DPLL_DIV_SHIFT			0
 #define OMAP3430_PERIPH_DPLL_DIV_MASK			(0x7f << 0)
+#define OMAP3630_PERIPH_DPLL_DCO_SEL_SHIFT		21
+#define OMAP3630_PERIPH_DPLL_DCO_SEL_MASK		(0x7 << 21)
+#define OMAP3630_PERIPH_DPLL_SD_DIV_SHIFT		24
+#define OMAP3630_PERIPH_DPLL_SD_DIV_MASK		(0xff << 24)
 
 /* CM_CLKSEL3_PLL */
 #define OMAP3430_DIV_96M_SHIFT				0
 #define OMAP3430_DIV_96M_MASK				(0x1f << 0)
+#define OMAP3630_DIV_96M_MASK				(0x3f << 0)
 
 /* CM_CLKSEL4_PLL */
 #define OMAP3430ES2_PERIPH2_DPLL_MULT_SHIFT		8
@@ -569,8 +591,10 @@
 /* CM_CLKSEL_DSS */
 #define OMAP3430_CLKSEL_TV_SHIFT			8
 #define OMAP3430_CLKSEL_TV_MASK				(0x1f << 8)
+#define OMAP3630_CLKSEL_TV_MASK				(0x3f << 8)
 #define OMAP3430_CLKSEL_DSS1_SHIFT			0
 #define OMAP3430_CLKSEL_DSS1_MASK			(0x1f << 0)
+#define OMAP3630_CLKSEL_DSS1_MASK			(0x3f << 0)
 
 /* CM_SLEEPDEP_DSS specific bits */
 
@@ -598,6 +622,7 @@
 /* CM_CLKSEL_CAM */
 #define OMAP3430_CLKSEL_CAM_SHIFT			0
 #define OMAP3430_CLKSEL_CAM_MASK			(0x1f << 0)
+#define OMAP3630_CLKSEL_CAM_MASK			(0x3f << 0)
 
 /* CM_SLEEPDEP_CAM specific bits */
 
@@ -693,6 +718,7 @@
 /* CM_CLKSEL1_EMU */
 #define OMAP3430_DIV_DPLL4_SHIFT			24
 #define OMAP3430_DIV_DPLL4_MASK				(0x1f << 24)
+#define OMAP3630_DIV_DPLL4_MASK				(0x3f << 24)
 #define OMAP3430_DIV_DPLL3_SHIFT			16
 #define OMAP3430_DIV_DPLL3_MASK				(0x1f << 16)
 #define OMAP3430_CLKSEL_TRACECLK_SHIFT			11

arch/arm/mach-omap2/cm.h

@@ -67,7 +67,8 @@
 #define CM_CLKSEL					0x0040
 #define CM_CLKSEL1					CM_CLKSEL
 #define CM_CLKSEL2					0x0044
-#define CM_CLKSTCTRL					0x0048
+#define OMAP2_CM_CLKSTCTRL				0x0048
+#define OMAP4_CM_CLKSTCTRL				0x0000
 
 
 /* Architecture-specific registers */
@@ -88,7 +89,7 @@
 #define OMAP3430_CM_CLKSEL1_PLL				CM_CLKSEL
 #define OMAP3430_CM_CLKSEL2_PLL				CM_CLKSEL2
 #define OMAP3430_CM_SLEEPDEP				CM_CLKSEL2
-#define OMAP3430_CM_CLKSEL3				CM_CLKSTCTRL
+#define OMAP3430_CM_CLKSEL3				OMAP2_CM_CLKSTCTRL
 #define OMAP3430_CM_CLKSTST				0x004c
 #define OMAP3430ES2_CM_CLKSEL4				0x004c
 #define OMAP3430ES2_CM_CLKSEL5				0x0050
@@ -138,5 +139,8 @@ static inline u32 cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
 /* CM_IDLEST_GFX */
 #define OMAP_ST_GFX					(1 << 0)
 
+/* CM_IDLEST indicator */
+#define OMAP24XX_CM_IDLEST_VAL		0
+#define OMAP34XX_CM_IDLEST_VAL		1
 
 #endif

arch/arm/mach-omap2/control.c

@@ -140,7 +140,11 @@ static struct omap3_control_regs control_context;
 
 void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
 {
-	omap2_ctrl_base = omap2_globals->ctrl;
+	/* Static mapping, never released */
+	if (omap2_globals->ctrl) {
+		omap2_ctrl_base = ioremap(omap2_globals->ctrl, SZ_4K);
+		WARN_ON(!omap2_ctrl_base);
+	}
 }
 
 void __iomem *omap_ctrl_base_get(void)

arch/arm/mach-omap2/cpuidle34xx.c

@@ -45,6 +45,8 @@
 #define OMAP3_STATE_C6 5 /* C6 - MPU OFF + Core RET */
 #define OMAP3_STATE_C7 6 /* C7 - MPU OFF + Core OFF */
 
+#define OMAP3_STATE_MAX OMAP3_STATE_C7
+
 struct omap3_processor_cx {
 	u8 valid;
 	u8 type;
@@ -60,6 +62,30 @@ struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES];
 struct omap3_processor_cx current_cx_state;
 struct powerdomain *mpu_pd, *core_pd;
 
+/*
+ * The latencies/thresholds for various C states have
+ * to be configured from the respective board files.
+ * These are some default values (which might not provide
+ * the best power savings) used on boards which do not
+ * pass these details from the board file.
+ */
+static struct cpuidle_params cpuidle_params_table[] = {
+	/* C1 */
+	{1, 2, 2, 5},
+	/* C2 */
+	{1, 10, 10, 30},
+	/* C3 */
+	{1, 50, 50, 300},
+	/* C4 */
+	{1, 1500, 1800, 4000},
+	/* C5 */
+	{1, 2500, 7500, 12000},
+	/* C6 */
+	{1, 3000, 8500, 15000},
+	/* C7 */
+	{1, 10000, 30000, 300000},
+};
+
 static int omap3_idle_bm_check(void)
 {
 	if (!omap3_can_sleep())
@@ -104,13 +130,6 @@ static int omap3_enter_idle(struct cpuidle_device *dev,
 	local_irq_disable();
 	local_fiq_disable();
 
-	if (!enable_off_mode) {
-		if (mpu_state < PWRDM_POWER_RET)
-			mpu_state = PWRDM_POWER_RET;
-		if (core_state < PWRDM_POWER_RET)
-			core_state = PWRDM_POWER_RET;
-	}
-
 	pwrdm_set_next_pwrst(mpu_pd, mpu_state);
 	pwrdm_set_next_pwrst(core_pd, core_state);
 
@@ -140,6 +159,67 @@ return_sleep_time:
 	return ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * USEC_PER_SEC;
 }
 
+/**
+ * next_valid_state - Find next valid c-state
+ * @dev: cpuidle device
+ * @state: Currently selected c-state
+ *
+ * If the current state is valid, it is returned back to the caller.
+ * Else, this function searches for a lower c-state which is still
+ * valid (as defined in omap3_power_states[]).
+ */
+static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev,
+						struct cpuidle_state *curr)
+{
+	struct cpuidle_state *next = NULL;
+	struct omap3_processor_cx *cx;
+
+	cx = (struct omap3_processor_cx *)cpuidle_get_statedata(curr);
+
+	/* Check if current state is valid */
+	if (cx->valid) {
+		return curr;
+	} else {
+		u8 idx = OMAP3_STATE_MAX;
+
+		/*
+		 * Reach the current state starting at highest C-state
+		 */
+		for (; idx >= OMAP3_STATE_C1; idx--) {
+			if (&dev->states[idx] == curr) {
+				next = &dev->states[idx];
+				break;
+			}
+		}
+
+		/*
+		 * Should never hit this condition.
+		 */
+		WARN_ON(next == NULL);
+
+		/*
+		 * Drop to next valid state.
+		 * Start search from the next (lower) state.
+		 */
+		idx--;
+		for (; idx >= OMAP3_STATE_C1; idx--) {
+			struct omap3_processor_cx *cx;
+
+			cx = cpuidle_get_statedata(&dev->states[idx]);
+			if (cx->valid) {
+				next = &dev->states[idx];
+				break;
+			}
+		}
+		/*
+		 * C1 and C2 are always valid.
+		 * So, no need to check for 'next==NULL' outside this loop.
+		 */
+	}
+
+	return next;
+}
+
 /**
  * omap3_enter_idle_bm - Checks for any bus activity
  * @dev: cpuidle device
@@ -152,7 +232,7 @@ return_sleep_time:
 static int omap3_enter_idle_bm(struct cpuidle_device *dev,
 			       struct cpuidle_state *state)
 {
-	struct cpuidle_state *new_state = state;
+	struct cpuidle_state *new_state = next_valid_state(dev, state);
 
 	if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) {
 		BUG_ON(!dev->safe_state);
@@ -165,6 +245,50 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
 
 DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
 
+/**
+ * omap3_cpuidle_update_states - Update the cpuidle states.
+ *
+ * Currently, this function toggles the validity of idle states based upon
+ * the flag 'enable_off_mode'. When the flag is set all states are valid.
+ * Else, states leading to OFF state set to be invalid.
+ */
+void omap3_cpuidle_update_states(void)
+{
+	int i;
+
+	for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) {
+		struct omap3_processor_cx *cx = &omap3_power_states[i];
+
+		if (enable_off_mode) {
+			cx->valid = 1;
+		} else {
+			if ((cx->mpu_state == PWRDM_POWER_OFF) ||
+				(cx->core_state	== PWRDM_POWER_OFF))
+				cx->valid = 0;
+		}
+	}
+}
+
+void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params)
+{
+	int i;
+
+	if (!cpuidle_board_params)
+		return;
+
+	for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) {
+		cpuidle_params_table[i].valid =
+			cpuidle_board_params[i].valid;
+		cpuidle_params_table[i].sleep_latency =
+			cpuidle_board_params[i].sleep_latency;
+		cpuidle_params_table[i].wake_latency =
+			cpuidle_board_params[i].wake_latency;
+		cpuidle_params_table[i].threshold =
+			cpuidle_board_params[i].threshold;
+	}
+	return;
+}
+
 /* omap3_init_power_states - Initialises the OMAP3 specific C states.
  *
  * Below is the desciption of each C state.
@@ -179,75 +303,103 @@ DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
 void omap_init_power_states(void)
 {
 	/* C1 . MPU WFI + Core active */
-	omap3_power_states[OMAP3_STATE_C1].valid = 1;
+	omap3_power_states[OMAP3_STATE_C1].valid =
+			cpuidle_params_table[OMAP3_STATE_C1].valid;
 	omap3_power_states[OMAP3_STATE_C1].type = OMAP3_STATE_C1;
-	omap3_power_states[OMAP3_STATE_C1].sleep_latency = 2;
-	omap3_power_states[OMAP3_STATE_C1].wakeup_latency = 2;
-	omap3_power_states[OMAP3_STATE_C1].threshold = 5;
+	omap3_power_states[OMAP3_STATE_C1].sleep_latency =
+			cpuidle_params_table[OMAP3_STATE_C1].sleep_latency;
+	omap3_power_states[OMAP3_STATE_C1].wakeup_latency =
+			cpuidle_params_table[OMAP3_STATE_C1].wake_latency;
+	omap3_power_states[OMAP3_STATE_C1].threshold =
+			cpuidle_params_table[OMAP3_STATE_C1].threshold;
 	omap3_power_states[OMAP3_STATE_C1].mpu_state = PWRDM_POWER_ON;
 	omap3_power_states[OMAP3_STATE_C1].core_state = PWRDM_POWER_ON;
 	omap3_power_states[OMAP3_STATE_C1].flags = CPUIDLE_FLAG_TIME_VALID;
 
 	/* C2 . MPU WFI + Core inactive */
-	omap3_power_states[OMAP3_STATE_C2].valid = 1;
+	omap3_power_states[OMAP3_STATE_C2].valid =
+			cpuidle_params_table[OMAP3_STATE_C2].valid;
 	omap3_power_states[OMAP3_STATE_C2].type = OMAP3_STATE_C2;
-	omap3_power_states[OMAP3_STATE_C2].sleep_latency = 10;
-	omap3_power_states[OMAP3_STATE_C2].wakeup_latency = 10;
-	omap3_power_states[OMAP3_STATE_C2].threshold = 30;
+	omap3_power_states[OMAP3_STATE_C2].sleep_latency =
+			cpuidle_params_table[OMAP3_STATE_C2].sleep_latency;
+	omap3_power_states[OMAP3_STATE_C2].wakeup_latency =
+			cpuidle_params_table[OMAP3_STATE_C2].wake_latency;
+	omap3_power_states[OMAP3_STATE_C2].threshold =
+			cpuidle_params_table[OMAP3_STATE_C2].threshold;
 	omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_ON;
 	omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON;
 	omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID;
 
 	/* C3 . MPU CSWR + Core inactive */
-	omap3_power_states[OMAP3_STATE_C3].valid = 1;
+	omap3_power_states[OMAP3_STATE_C3].valid =
+			cpuidle_params_table[OMAP3_STATE_C3].valid;
 	omap3_power_states[OMAP3_STATE_C3].type = OMAP3_STATE_C3;
-	omap3_power_states[OMAP3_STATE_C3].sleep_latency = 50;
-	omap3_power_states[OMAP3_STATE_C3].wakeup_latency = 50;
-	omap3_power_states[OMAP3_STATE_C3].threshold = 300;
+	omap3_power_states[OMAP3_STATE_C3].sleep_latency =
+			cpuidle_params_table[OMAP3_STATE_C3].sleep_latency;
+	omap3_power_states[OMAP3_STATE_C3].wakeup_latency =
+			cpuidle_params_table[OMAP3_STATE_C3].wake_latency;
+	omap3_power_states[OMAP3_STATE_C3].threshold =
+			cpuidle_params_table[OMAP3_STATE_C3].threshold;
 	omap3_power_states[OMAP3_STATE_C3].mpu_state = PWRDM_POWER_RET;
 	omap3_power_states[OMAP3_STATE_C3].core_state = PWRDM_POWER_ON;
 	omap3_power_states[OMAP3_STATE_C3].flags = CPUIDLE_FLAG_TIME_VALID |
 				CPUIDLE_FLAG_CHECK_BM;
 
 	/* C4 . MPU OFF + Core inactive */
-	omap3_power_states[OMAP3_STATE_C4].valid = 1;
+	omap3_power_states[OMAP3_STATE_C4].valid =
+			cpuidle_params_table[OMAP3_STATE_C4].valid;
 	omap3_power_states[OMAP3_STATE_C4].type = OMAP3_STATE_C4;
-	omap3_power_states[OMAP3_STATE_C4].sleep_latency = 1500;
-	omap3_power_states[OMAP3_STATE_C4].wakeup_latency = 1800;
-	omap3_power_states[OMAP3_STATE_C4].threshold = 4000;
+	omap3_power_states[OMAP3_STATE_C4].sleep_latency =
+			cpuidle_params_table[OMAP3_STATE_C4].sleep_latency;
+	omap3_power_states[OMAP3_STATE_C4].wakeup_latency =
+			cpuidle_params_table[OMAP3_STATE_C4].wake_latency;
+	omap3_power_states[OMAP3_STATE_C4].threshold =
+			cpuidle_params_table[OMAP3_STATE_C4].threshold;
 	omap3_power_states[OMAP3_STATE_C4].mpu_state = PWRDM_POWER_OFF;
 	omap3_power_states[OMAP3_STATE_C4].core_state = PWRDM_POWER_ON;
 	omap3_power_states[OMAP3_STATE_C4].flags = CPUIDLE_FLAG_TIME_VALID |
 				CPUIDLE_FLAG_CHECK_BM;
 
 	/* C5 . MPU CSWR + Core CSWR*/
-	omap3_power_states[OMAP3_STATE_C5].valid = 1;
+	omap3_power_states[OMAP3_STATE_C5].valid =
+			cpuidle_params_table[OMAP3_STATE_C5].valid;
 	omap3_power_states[OMAP3_STATE_C5].type = OMAP3_STATE_C5;
-	omap3_power_states[OMAP3_STATE_C5].sleep_latency = 2500;
-	omap3_power_states[OMAP3_STATE_C5].wakeup_latency = 7500;
-	omap3_power_states[OMAP3_STATE_C5].threshold = 12000;
+	omap3_power_states[OMAP3_STATE_C5].sleep_latency =
+			cpuidle_params_table[OMAP3_STATE_C5].sleep_latency;
+	omap3_power_states[OMAP3_STATE_C5].wakeup_latency =
+			cpuidle_params_table[OMAP3_STATE_C5].wake_latency;
+	omap3_power_states[OMAP3_STATE_C5].threshold =
+			cpuidle_params_table[OMAP3_STATE_C5].threshold;
 	omap3_power_states[OMAP3_STATE_C5].mpu_state = PWRDM_POWER_RET;
 	omap3_power_states[OMAP3_STATE_C5].core_state = PWRDM_POWER_RET;
 	omap3_power_states[OMAP3_STATE_C5].flags = CPUIDLE_FLAG_TIME_VALID |
 				CPUIDLE_FLAG_CHECK_BM;
 
 	/* C6 . MPU OFF + Core CSWR */
-	omap3_power_states[OMAP3_STATE_C6].valid = 1;
+	omap3_power_states[OMAP3_STATE_C6].valid =
+			cpuidle_params_table[OMAP3_STATE_C6].valid;
 	omap3_power_states[OMAP3_STATE_C6].type = OMAP3_STATE_C6;
-	omap3_power_states[OMAP3_STATE_C6].sleep_latency = 3000;
-	omap3_power_states[OMAP3_STATE_C6].wakeup_latency = 8500;
-	omap3_power_states[OMAP3_STATE_C6].threshold = 15000;
+	omap3_power_states[OMAP3_STATE_C6].sleep_latency =
+			cpuidle_params_table[OMAP3_STATE_C6].sleep_latency;
+	omap3_power_states[OMAP3_STATE_C6].wakeup_latency =
+			cpuidle_params_table[OMAP3_STATE_C6].wake_latency;
+	omap3_power_states[OMAP3_STATE_C6].threshold =
+			cpuidle_params_table[OMAP3_STATE_C6].threshold;
 	omap3_power_states[OMAP3_STATE_C6].mpu_state = PWRDM_POWER_OFF;
 	omap3_power_states[OMAP3_STATE_C6].core_state = PWRDM_POWER_RET;
 	omap3_power_states[OMAP3_STATE_C6].flags = CPUIDLE_FLAG_TIME_VALID |
 				CPUIDLE_FLAG_CHECK_BM;
 
 	/* C7 . MPU OFF + Core OFF */
-	omap3_power_states[OMAP3_STATE_C7].valid = 1;
+	omap3_power_states[OMAP3_STATE_C7].valid =
+			cpuidle_params_table[OMAP3_STATE_C7].valid;
 	omap3_power_states[OMAP3_STATE_C7].type = OMAP3_STATE_C7;
-	omap3_power_states[OMAP3_STATE_C7].sleep_latency = 10000;
-	omap3_power_states[OMAP3_STATE_C7].wakeup_latency = 30000;
-	omap3_power_states[OMAP3_STATE_C7].threshold = 300000;
+	omap3_power_states[OMAP3_STATE_C7].sleep_latency =
+			cpuidle_params_table[OMAP3_STATE_C7].sleep_latency;
+	omap3_power_states[OMAP3_STATE_C7].wakeup_latency =
+			cpuidle_params_table[OMAP3_STATE_C7].wake_latency;
+	omap3_power_states[OMAP3_STATE_C7].threshold =
+			cpuidle_params_table[OMAP3_STATE_C7].threshold;
 	omap3_power_states[OMAP3_STATE_C7].mpu_state = PWRDM_POWER_OFF;
 	omap3_power_states[OMAP3_STATE_C7].core_state = PWRDM_POWER_OFF;
 	omap3_power_states[OMAP3_STATE_C7].flags = CPUIDLE_FLAG_TIME_VALID |
@@ -302,6 +454,8 @@ int __init omap3_idle_init(void)
 		return -EINVAL;
 	dev->state_count = count;
 
+	omap3_cpuidle_update_states();
+
 	if (cpuidle_register_device(dev)) {
 		printk(KERN_ERR "%s: CPUidle register device failed\n",
 		       __func__);

arch/arm/mach-omap2/devices.c

@@ -141,7 +141,7 @@ static inline void omap_init_camera(void)
 #define MBOX_REG_SIZE   0x120
 
 #ifdef CONFIG_ARCH_OMAP2
-static struct resource omap_mbox_resources[] = {
+static struct resource omap2_mbox_resources[] = {
 	{
 		.start		= OMAP24XX_MAILBOX_BASE,
 		.end		= OMAP24XX_MAILBOX_BASE + MBOX_REG_SIZE - 1,
@@ -156,10 +156,14 @@ static struct resource omap_mbox_resources[] = {
 		.flags		= IORESOURCE_IRQ,
 	},
 };
+static int omap2_mbox_resources_sz = ARRAY_SIZE(omap2_mbox_resources);
+#else
+#define omap2_mbox_resources		NULL
+#define omap2_mbox_resources_sz		0
 #endif
 
 #ifdef CONFIG_ARCH_OMAP3
-static struct resource omap_mbox_resources[] = {
+static struct resource omap3_mbox_resources[] = {
 	{
 		.start		= OMAP34XX_MAILBOX_BASE,
 		.end		= OMAP34XX_MAILBOX_BASE + MBOX_REG_SIZE - 1,
@@ -170,12 +174,16 @@ static struct resource omap_mbox_resources[] = {
 		.flags		= IORESOURCE_IRQ,
 	},
 };
+static int omap3_mbox_resources_sz = ARRAY_SIZE(omap3_mbox_resources);
+#else
+#define omap3_mbox_resources		NULL
+#define omap3_mbox_resources_sz		0
 #endif
 
 #ifdef CONFIG_ARCH_OMAP4
 
 #define OMAP4_MBOX_REG_SIZE	0x130
-static struct resource omap_mbox_resources[] = {
+static struct resource omap4_mbox_resources[] = {
 	{
 		.start          = OMAP44XX_MAILBOX_BASE,
 		.end            = OMAP44XX_MAILBOX_BASE +
@@ -183,10 +191,14 @@ static struct resource omap_mbox_resources[] = {
 		.flags          = IORESOURCE_MEM,
 	},
 	{
-		.start          = INT_44XX_MAIL_U0_MPU,
+		.start          = OMAP44XX_IRQ_MAIL_U0,
 		.flags          = IORESOURCE_IRQ,
 	},
 };
+static int omap4_mbox_resources_sz = ARRAY_SIZE(omap4_mbox_resources);
+#else
+#define omap4_mbox_resources		NULL
+#define omap4_mbox_resources_sz		0
 #endif
 
 static struct platform_device mbox_device = {
@@ -196,9 +208,15 @@ static struct platform_device mbox_device = {
 
 static inline void omap_init_mbox(void)
 {
-	if (cpu_is_omap2420() || cpu_is_omap3430() || cpu_is_omap44xx()) {
-		mbox_device.num_resources = ARRAY_SIZE(omap_mbox_resources);
-		mbox_device.resource = omap_mbox_resources;
+	if (cpu_is_omap24xx()) {
+		mbox_device.resource = omap2_mbox_resources;
+		mbox_device.num_resources = omap2_mbox_resources_sz;
+	} else if (cpu_is_omap34xx()) {
+		mbox_device.resource = omap3_mbox_resources;
+		mbox_device.num_resources = omap3_mbox_resources_sz;
+	} else if (cpu_is_omap44xx()) {
+		mbox_device.resource = omap4_mbox_resources;
+		mbox_device.num_resources = omap4_mbox_resources_sz;
 	} else {
 		pr_err("%s: platform not supported\n", __func__);
 		return;
@@ -492,7 +510,12 @@ static struct platform_device dummy_pdev = {
  **/
 static void __init omap_hsmmc_reset(void)
 {
-	u32 i, nr_controllers = cpu_is_omap44xx() ? OMAP44XX_NR_MMC :
+	u32 i, nr_controllers;
+
+	if (cpu_is_omap242x())
+		return;
+
+	nr_controllers = cpu_is_omap44xx() ? OMAP44XX_NR_MMC :
 		(cpu_is_omap34xx() ? OMAP34XX_NR_MMC : OMAP24XX_NR_MMC);
 
 	for (i = 0; i < nr_controllers; i++) {
@@ -697,13 +720,13 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
 			if (!cpu_is_omap44xx())
 				return;
 			base = OMAP4_MMC4_BASE + OMAP4_MMC_REG_OFFSET;
-			irq = INT_44XX_MMC4_IRQ;
+			irq = OMAP44XX_IRQ_MMC4;
 			break;
 		case 4:
 			if (!cpu_is_omap44xx())
 				return;
 			base = OMAP4_MMC5_BASE + OMAP4_MMC_REG_OFFSET;
-			irq = INT_44XX_MMC5_IRQ;
+			irq = OMAP44XX_IRQ_MMC4;
 			break;
 		default:
 			continue;
@@ -715,7 +738,7 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
 		} else if (cpu_is_omap44xx()) {
 			if (i < 3) {
 				base += OMAP4_MMC_REG_OFFSET;
-				irq += IRQ_GIC_START;
+				irq += OMAP44XX_IRQ_GIC_START;
 			}
 			size = OMAP4_HSMMC_SIZE;
 			name = "mmci-omap-hs";

arch/arm/mach-omap2/dpll.c → arch/arm/mach-omap2/dpll3xxx.c

@@ -1,11 +1,14 @@
 /*
  * OMAP3/4 - specific DPLL control functions
  *
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
  *
  * Written by Paul Walmsley
- * Testing and integration fixes by Jouni Högander
+ * Testing and integration fixes by Jouni Högander
+ *
+ * 36xx support added by Vishwanath BS, Richard Woodruff, and Nishanth
+ * Menon
  *
  * Parts of this code are based on code written by
  * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
@@ -15,7 +18,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
 #include <linux/list.h>
@@ -23,13 +25,10 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <linux/limits.h>
 #include <linux/bitops.h>
 
 #include <plat/cpu.h>
 #include <plat/clock.h>
-#include <plat/sram.h>
-#include <asm/div64.h>
 #include <asm/clkdev.h>
 
 #include "clock.h"
@@ -44,17 +43,7 @@
 
 #define MAX_DPLL_WAIT_TRIES		1000000
 
-
-/**
- * omap3_dpll_recalc - recalculate DPLL rate
- * @clk: DPLL struct clk
- *
- * Recalculate and propagate the DPLL rate.
- */
-unsigned long omap3_dpll_recalc(struct clk *clk)
-{
-	return omap2_get_dpll_rate(clk);
-}
+/* Private functions */
 
 /* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
 static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
@@ -136,8 +125,6 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
 	return f;
 }
 
-/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
-
 /*
  * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
  * @clk: pointer to a DPLL struct clk
@@ -237,6 +224,122 @@ static int _omap3_noncore_dpll_stop(struct clk *clk)
 	return 0;
 }
 
+/**
+ * lookup_dco_sddiv -  Set j-type DPLL4 compensation variables
+ * @clk: pointer to a DPLL struct clk
+ * @dco: digital control oscillator selector
+ * @sd_div: target sigma-delta divider
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ *
+ * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
+ *
+ * XXX This code is not needed for 3430/AM35xx; can it be optimized
+ * out in non-multi-OMAP builds for those chips?
+ */
+static void lookup_dco_sddiv(struct clk *clk, u8 *dco, u8 *sd_div, u16 m,
+			     u8 n)
+{
+	unsigned long fint, clkinp, sd; /* watch out for overflow */
+	int mod1, mod2;
+
+	clkinp = clk->parent->rate;
+	fint = (clkinp / n) * m;
+
+	if (fint < 1000000000)
+		*dco = 2;
+	else
+		*dco = 4;
+	/*
+	 * target sigma-delta to near 250MHz
+	 * sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)]
+	 */
+	clkinp /= 100000; /* shift from MHz to 10*Hz for 38.4 and 19.2 */
+	mod1 = (clkinp * m) % (250 * n);
+	sd = (clkinp * m) / (250 * n);
+	mod2 = sd % 10;
+	sd /= 10;
+
+	if (mod1 || mod2)
+		sd++;
+	*sd_div = sd;
+}
+
+/*
+ * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
+ * @clk: struct clk * of DPLL to set
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ * @freqsel: FREQSEL value to set
+ *
+ * Program the DPLL with the supplied M, N values, and wait for the DPLL to
+ * lock..  Returns -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
+{
+	struct dpll_data *dd = clk->dpll_data;
+	u32 v;
+
+	/* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
+	_omap3_noncore_dpll_bypass(clk);
+
+	/*
+	 * Set jitter correction. No jitter correction for OMAP4 and 3630
+	 * since freqsel field is no longer present
+	 */
+	if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
+		v = __raw_readl(dd->control_reg);
+		v &= ~dd->freqsel_mask;
+		v |= freqsel << __ffs(dd->freqsel_mask);
+		__raw_writel(v, dd->control_reg);
+	}
+
+	/* Set DPLL multiplier, divider */
+	v = __raw_readl(dd->mult_div1_reg);
+	v &= ~(dd->mult_mask | dd->div1_mask);
+	v |= m << __ffs(dd->mult_mask);
+	v |= (n - 1) << __ffs(dd->div1_mask);
+
+	/*
+	 * XXX This code is not needed for 3430/AM35XX; can it be optimized
+	 * out in non-multi-OMAP builds for those chips?
+	 */
+	if ((dd->flags & DPLL_J_TYPE) && !(dd->flags & DPLL_NO_DCO_SEL)) {
+		u8 dco, sd_div;
+		lookup_dco_sddiv(clk, &dco, &sd_div, m, n);
+		/* XXX This probably will need revision for OMAP4 */
+		v &= ~(OMAP3630_PERIPH_DPLL_DCO_SEL_MASK
+			| OMAP3630_PERIPH_DPLL_SD_DIV_MASK);
+		v |= dco << __ffs(OMAP3630_PERIPH_DPLL_DCO_SEL_MASK);
+		v |= sd_div << __ffs(OMAP3630_PERIPH_DPLL_SD_DIV_MASK);
+	}
+
+	__raw_writel(v, dd->mult_div1_reg);
+
+	/* We let the clock framework set the other output dividers later */
+
+	/* REVISIT: Set ramp-up delay? */
+
+	_omap3_noncore_dpll_lock(clk);
+
+	return 0;
+}
+
+/* Public functions */
+
+/**
+ * omap3_dpll_recalc - recalculate DPLL rate
+ * @clk: DPLL struct clk
+ *
+ * Recalculate and propagate the DPLL rate.
+ */
+unsigned long omap3_dpll_recalc(struct clk *clk)
+{
+	return omap2_get_dpll_rate(clk);
+}
+
+/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
+
 /**
  * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
  * @clk: pointer to a DPLL struct clk
@@ -292,48 +395,6 @@ void omap3_noncore_dpll_disable(struct clk *clk)
 
 /* Non-CORE DPLL rate set code */
 
-/*
- * omap3_noncore_dpll_program - set non-core DPLL M,N values directly
- * @clk: struct clk * of DPLL to set
- * @m: DPLL multiplier to set
- * @n: DPLL divider to set
- * @freqsel: FREQSEL value to set
- *
- * Program the DPLL with the supplied M, N values, and wait for the DPLL to
- * lock..  Returns -EINVAL upon error, or 0 upon success.
- */
-int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
-{
-	struct dpll_data *dd = clk->dpll_data;
-	u32 v;
-
-	/* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
-	_omap3_noncore_dpll_bypass(clk);
-
-	/* Set jitter correction */
-	if (!cpu_is_omap44xx()) {
-		v = __raw_readl(dd->control_reg);
-		v &= ~dd->freqsel_mask;
-		v |= freqsel << __ffs(dd->freqsel_mask);
-		__raw_writel(v, dd->control_reg);
-	}
-
-	/* Set DPLL multiplier, divider */
-	v = __raw_readl(dd->mult_div1_reg);
-	v &= ~(dd->mult_mask | dd->div1_mask);
-	v |= m << __ffs(dd->mult_mask);
-	v |= (n - 1) << __ffs(dd->div1_mask);
-	__raw_writel(v, dd->mult_div1_reg);
-
-	/* We let the clock framework set the other output dividers later */
-
-	/* REVISIT: Set ramp-up delay? */
-
-	_omap3_noncore_dpll_lock(clk);
-
-	return 0;
-}
-
 /**
  * omap3_noncore_dpll_set_rate - set non-core DPLL rate
  * @clk: struct clk * of DPLL to set
@@ -384,8 +445,8 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 		if (dd->last_rounded_rate == 0)
 			return -EINVAL;
 
-		/* No freqsel on OMAP4 */
-		if (!cpu_is_omap44xx()) {
+		/* No freqsel on OMAP4 and OMAP3630 */
+		if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
 			freqsel = _omap3_dpll_compute_freqsel(clk,
 						dd->last_rounded_n);
 			if (!freqsel)
@@ -530,7 +591,7 @@ unsigned long omap3_clkoutx2_recalc(struct clk *clk)
 
 	v = __raw_readl(dd->control_reg) & dd->enable_mask;
 	v >>= __ffs(dd->enable_mask);
-	if (v != OMAP3XXX_EN_DPLL_LOCKED)
+	if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
 		rate = clk->parent->rate;
 	else
 		rate = clk->parent->rate * 2;

arch/arm/mach-omap2/emu.c

@@ -56,6 +56,9 @@ static struct amba_device omap3_etm_device = {
 
 static int __init emu_init(void)
 {
+	if (!cpu_is_omap34xx())
+		return -ENODEV;
+
 	amba_device_register(&omap3_etb_device, &iomem_resource);
 	amba_device_register(&omap3_etm_device, &iomem_resource);
 

arch/arm/mach-omap2/gpmc-nand.c

@@ -0,0 +1,139 @@
+/*
+ * gpmc-nand.c
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Vimal Singh <vimalsingh@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/mach/flash.h>
+
+#include <plat/nand.h>
+#include <plat/board.h>
+#include <plat/gpmc.h>
+
+#define WR_RD_PIN_MONITORING	0x00600000
+
+static struct omap_nand_platform_data *gpmc_nand_data;
+
+static struct resource gpmc_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device gpmc_nand_device = {
+	.name		= "omap2-nand",
+	.id		= 0,
+	.num_resources	= 1,
+	.resource	= &gpmc_nand_resource,
+};
+
+static int omap2_nand_gpmc_retime(void)
+{
+	struct gpmc_timings t;
+	int err;
+
+	memset(&t, 0, sizeof(t));
+	t.sync_clk = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->sync_clk);
+	t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on);
+	t.adv_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->adv_on);
+
+	/* Read */
+	t.adv_rd_off = gpmc_round_ns_to_ticks(
+				gpmc_nand_data->gpmc_t->adv_rd_off);
+	t.oe_on  = t.adv_on;
+	t.access = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->access);
+	t.oe_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->oe_off);
+	t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_rd_off);
+	t.rd_cycle  = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->rd_cycle);
+
+	/* Write */
+	t.adv_wr_off = gpmc_round_ns_to_ticks(
+				gpmc_nand_data->gpmc_t->adv_wr_off);
+	t.we_on  = t.oe_on;
+	if (cpu_is_omap34xx()) {
+	    t.wr_data_mux_bus =	gpmc_round_ns_to_ticks(
+				gpmc_nand_data->gpmc_t->wr_data_mux_bus);
+	    t.wr_access = gpmc_round_ns_to_ticks(
+				gpmc_nand_data->gpmc_t->wr_access);
+	}
+	t.we_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->we_off);
+	t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_wr_off);
+	t.wr_cycle  = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle);
+
+	/* Configure GPMC */
+	gpmc_cs_write_reg(gpmc_nand_data->cs, GPMC_CS_CONFIG1,
+			GPMC_CONFIG1_DEVICESIZE(gpmc_nand_data->devsize) |
+			GPMC_CONFIG1_DEVICETYPE_NAND);
+
+	err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int gpmc_nand_setup(void)
+{
+	struct device *dev = &gpmc_nand_device.dev;
+
+	/* Set timings in GPMC */
+	if (omap2_nand_gpmc_retime() < 0) {
+		dev_err(dev, "Unable to set gpmc timings\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int __init gpmc_nand_init(struct omap_nand_platform_data *_nand_data)
+{
+	unsigned int val;
+	int err	= 0;
+	struct device *dev = &gpmc_nand_device.dev;
+
+	gpmc_nand_data = _nand_data;
+	gpmc_nand_data->nand_setup = gpmc_nand_setup;
+	gpmc_nand_device.dev.platform_data = gpmc_nand_data;
+
+	err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
+				&gpmc_nand_data->phys_base);
+	if (err < 0) {
+		dev_err(dev, "Cannot request GPMC CS\n");
+		return err;
+	}
+
+	err = gpmc_nand_setup();
+	if (err < 0) {
+		dev_err(dev, "NAND platform setup failed: %d\n", err);
+		return err;
+	}
+
+	/* Enable RD PIN Monitoring Reg */
+	if (gpmc_nand_data->dev_ready) {
+		val  = gpmc_cs_read_reg(gpmc_nand_data->cs,
+						 GPMC_CS_CONFIG1);
+		val |= WR_RD_PIN_MONITORING;
+		gpmc_cs_write_reg(gpmc_nand_data->cs,
+						GPMC_CS_CONFIG1, val);
+	}
+
+	err = platform_device_register(&gpmc_nand_device);
+	if (err < 0) {
+		dev_err(dev, "Unable to register NAND device\n");
+		goto out_free_cs;
+	}
+
+	return 0;
+
+out_free_cs:
+	gpmc_cs_free(gpmc_nand_data->cs);
+
+	return err;
+}

arch/arm/mach-omap2/gpmc.c

@@ -552,9 +552,10 @@ void __init gpmc_init(void)
 #ifdef CONFIG_ARCH_OMAP3
 static struct omap3_gpmc_regs gpmc_context;
 
-void omap3_gpmc_save_context()
+void omap3_gpmc_save_context(void)
 {
 	int i;
+
 	gpmc_context.sysconfig = gpmc_read_reg(GPMC_SYSCONFIG);
 	gpmc_context.irqenable = gpmc_read_reg(GPMC_IRQENABLE);
 	gpmc_context.timeout_ctrl = gpmc_read_reg(GPMC_TIMEOUT_CONTROL);
@@ -583,9 +584,10 @@ void omap3_gpmc_save_context()
 	}
 }
 
-void omap3_gpmc_restore_context()
+void omap3_gpmc_restore_context(void)
 {
 	int i;
+
 	gpmc_write_reg(GPMC_SYSCONFIG, gpmc_context.sysconfig);
 	gpmc_write_reg(GPMC_IRQENABLE, gpmc_context.irqenable);
 	gpmc_write_reg(GPMC_TIMEOUT_CONTROL, gpmc_context.timeout_ctrl);

arch/arm/mach-omap2/hsmmc.c

@@ -0,0 +1,266 @@
+/*
+ * linux/arch/arm/mach-omap2/hsmmc.c
+ *
+ * Copyright (C) 2007-2008 Texas Instruments
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <mach/hardware.h>
+#include <plat/control.h>
+#include <plat/mmc.h>
+#include <plat/omap-pm.h>
+
+#include "hsmmc.h"
+
+#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+
+static u16 control_pbias_offset;
+static u16 control_devconf1_offset;
+
+#define HSMMC_NAME_LEN	9
+
+static struct hsmmc_controller {
+	char				name[HSMMC_NAME_LEN + 1];
+} hsmmc[OMAP34XX_NR_MMC];
+
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+
+static int hsmmc_get_context_loss(struct device *dev)
+{
+	return omap_pm_get_dev_context_loss_count(dev);
+}
+
+#else
+#define hsmmc_get_context_loss NULL
+#endif
+
+static void hsmmc1_before_set_reg(struct device *dev, int slot,
+				  int power_on, int vdd)
+{
+	u32 reg, prog_io;
+	struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+	if (mmc->slots[0].remux)
+		mmc->slots[0].remux(dev, slot, power_on);
+
+	/*
+	 * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
+	 * card with Vcc regulator (from twl4030 or whatever).  OMAP has both
+	 * 1.8V and 3.0V modes, controlled by the PBIAS register.
+	 *
+	 * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
+	 * is most naturally TWL VSIM; those pins also use PBIAS.
+	 *
+	 * FIXME handle VMMC1A as needed ...
+	 */
+	if (power_on) {
+		if (cpu_is_omap2430()) {
+			reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1);
+			if ((1 << vdd) >= MMC_VDD_30_31)
+				reg |= OMAP243X_MMC1_ACTIVE_OVERWRITE;
+			else
+				reg &= ~OMAP243X_MMC1_ACTIVE_OVERWRITE;
+			omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
+		}
+
+		if (mmc->slots[0].internal_clock) {
+			reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+			reg |= OMAP2_MMCSDIO1ADPCLKISEL;
+			omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
+		}
+
+		reg = omap_ctrl_readl(control_pbias_offset);
+		if (cpu_is_omap3630()) {
+			/* Set MMC I/O to 52Mhz */
+			prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
+			prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL;
+			omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1);
+		} else {
+			reg |= OMAP2_PBIASSPEEDCTRL0;
+		}
+		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
+		omap_ctrl_writel(reg, control_pbias_offset);
+	} else {
+		reg = omap_ctrl_readl(control_pbias_offset);
+		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
+		omap_ctrl_writel(reg, control_pbias_offset);
+	}
+}
+
+static void hsmmc1_after_set_reg(struct device *dev, int slot,
+				 int power_on, int vdd)
+{
+	u32 reg;
+
+	/* 100ms delay required for PBIAS configuration */
+	msleep(100);
+
+	if (power_on) {
+		reg = omap_ctrl_readl(control_pbias_offset);
+		reg |= (OMAP2_PBIASLITEPWRDNZ0 | OMAP2_PBIASSPEEDCTRL0);
+		if ((1 << vdd) <= MMC_VDD_165_195)
+			reg &= ~OMAP2_PBIASLITEVMODE0;
+		else
+			reg |= OMAP2_PBIASLITEVMODE0;
+		omap_ctrl_writel(reg, control_pbias_offset);
+	} else {
+		reg = omap_ctrl_readl(control_pbias_offset);
+		reg |= (OMAP2_PBIASSPEEDCTRL0 | OMAP2_PBIASLITEPWRDNZ0 |
+			OMAP2_PBIASLITEVMODE0);
+		omap_ctrl_writel(reg, control_pbias_offset);
+	}
+}
+
+static void hsmmc23_before_set_reg(struct device *dev, int slot,
+				   int power_on, int vdd)
+{
+	struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+	if (mmc->slots[0].remux)
+		mmc->slots[0].remux(dev, slot, power_on);
+
+	if (power_on) {
+		/* Only MMC2 supports a CLKIN */
+		if (mmc->slots[0].internal_clock) {
+			u32 reg;
+
+			reg = omap_ctrl_readl(control_devconf1_offset);
+			reg |= OMAP2_MMCSDIO2ADPCLKISEL;
+			omap_ctrl_writel(reg, control_devconf1_offset);
+		}
+	}
+}
+
+static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
+
+void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
+{
+	struct omap2_hsmmc_info *c;
+	int nr_hsmmc = ARRAY_SIZE(hsmmc_data);
+	int i;
+
+	if (cpu_is_omap2430()) {
+		control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
+		control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1;
+	} else {
+		control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE;
+		control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1;
+	}
+
+	for (c = controllers; c->mmc; c++) {
+		struct hsmmc_controller *hc = hsmmc + c->mmc - 1;
+		struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1];
+
+		if (!c->mmc || c->mmc > nr_hsmmc) {
+			pr_debug("MMC%d: no such controller\n", c->mmc);
+			continue;
+		}
+		if (mmc) {
+			pr_debug("MMC%d: already configured\n", c->mmc);
+			continue;
+		}
+
+		mmc = kzalloc(sizeof(struct omap_mmc_platform_data),
+			      GFP_KERNEL);
+		if (!mmc) {
+			pr_err("Cannot allocate memory for mmc device!\n");
+			goto done;
+		}
+
+		if (c->name)
+			strncpy(hc->name, c->name, HSMMC_NAME_LEN);
+		else
+			snprintf(hc->name, ARRAY_SIZE(hc->name),
+				"mmc%islot%i", c->mmc, 1);
+		mmc->slots[0].name = hc->name;
+		mmc->nr_slots = 1;
+		mmc->slots[0].wires = c->wires;
+		mmc->slots[0].internal_clock = !c->ext_clock;
+		mmc->dma_mask = 0xffffffff;
+
+		mmc->get_context_loss_count = hsmmc_get_context_loss;
+
+		mmc->slots[0].switch_pin = c->gpio_cd;
+		mmc->slots[0].gpio_wp = c->gpio_wp;
+
+		mmc->slots[0].remux = c->remux;
+
+		if (c->cover_only)
+			mmc->slots[0].cover = 1;
+
+		if (c->nonremovable)
+			mmc->slots[0].nonremovable = 1;
+
+		if (c->power_saving)
+			mmc->slots[0].power_saving = 1;
+
+		if (c->no_off)
+			mmc->slots[0].no_off = 1;
+
+		if (c->vcc_aux_disable_is_sleep)
+			mmc->slots[0].vcc_aux_disable_is_sleep = 1;
+
+		/* NOTE:  MMC slots should have a Vcc regulator set up.
+		 * This may be from a TWL4030-family chip, another
+		 * controllable regulator, or a fixed supply.
+		 *
+		 * temporary HACK: ocr_mask instead of fixed supply
+		 */
+		mmc->slots[0].ocr_mask = c->ocr_mask;
+
+		switch (c->mmc) {
+		case 1:
+			/* on-chip level shifting via PBIAS0/PBIAS1 */
+			mmc->slots[0].before_set_reg = hsmmc1_before_set_reg;
+			mmc->slots[0].after_set_reg = hsmmc1_after_set_reg;
+
+			/* Omap3630 HSMMC1 supports only 4-bit */
+			if (cpu_is_omap3630() && c->wires > 4) {
+				c->wires = 4;
+				mmc->slots[0].wires = c->wires;
+			}
+			break;
+		case 2:
+			if (c->ext_clock)
+				c->transceiver = 1;
+			if (c->transceiver && c->wires > 4)
+				c->wires = 4;
+			/* FALLTHROUGH */
+		case 3:
+			/* off-chip level shifting, or none */
+			mmc->slots[0].before_set_reg = hsmmc23_before_set_reg;
+			mmc->slots[0].after_set_reg = NULL;
+			break;
+		default:
+			pr_err("MMC%d configuration not supported!\n", c->mmc);
+			kfree(mmc);
+			continue;
+		}
+		hsmmc_data[c->mmc - 1] = mmc;
+	}
+
+	omap2_init_mmc(hsmmc_data, OMAP34XX_NR_MMC);
+
+	/* pass the device nodes back to board setup code */
+	for (c = controllers; c->mmc; c++) {
+		struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1];
+
+		if (!c->mmc || c->mmc > nr_hsmmc)
+			continue;
+		c->dev = mmc->dev;
+	}
+
+done:
+	for (i = 0; i < nr_hsmmc; i++)
+		kfree(hsmmc_data[i]);
+}
+
+#endif

arch/arm/mach-omap2/mmc-twl4030.h → arch/arm/mach-omap2/hsmmc.h

@@ -6,7 +6,7 @@
  * published by the Free Software Foundation.
  */
 
-struct twl4030_hsmmc_info {
+struct omap2_hsmmc_info {
 	u8	mmc;		/* controller 1/2/3 */
 	u8	wires;		/* 1/4/8 wires */
 	bool	transceiver;	/* MMC-2 option */
@@ -14,22 +14,24 @@ struct twl4030_hsmmc_info {
 	bool	cover_only;	/* No card detect - just cover switch */
 	bool	nonremovable;	/* Nonremovable e.g. eMMC */
 	bool	power_saving;	/* Try to sleep or power off when possible */
+	bool	no_off;		/* power_saving and power is not to go off */
+	bool	vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */
 	int	gpio_cd;	/* or -EINVAL */
 	int	gpio_wp;	/* or -EINVAL */
 	char	*name;		/* or NULL for default */
 	struct device *dev;	/* returned: pointer to mmc adapter */
 	int	ocr_mask;	/* temporary HACK */
+	/* Remux (pad configuation) when powering on/off */
+	void (*remux)(struct device *dev, int slot, int power_on);
 };
 
-#if defined(CONFIG_REGULATOR) && \
-	(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
-	 defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
+#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
 
-void twl4030_mmc_init(struct twl4030_hsmmc_info *);
+void omap2_hsmmc_init(struct omap2_hsmmc_info *);
 
 #else
 
-static inline void twl4030_mmc_init(struct twl4030_hsmmc_info *info)
+static inline void omap2_hsmmc_init(struct omap2_hsmmc_info *info)
 {
 }
 

arch/arm/mach-omap2/i2c.c

@@ -25,9 +25,7 @@
 
 #include "mux.h"
 
-int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
-			  struct i2c_board_info const *info,
-			  unsigned len)
+void __init omap2_i2c_mux_pins(int bus_id)
 {
 	if (cpu_is_omap24xx()) {
 		const int omap24xx_pins[][2] = {
@@ -51,6 +49,4 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
 		sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
 		omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
 	}
-
-	return omap_plat_register_i2c_bus(bus_id, clkrate, info, len);
 }

arch/arm/mach-omap2/id.c

@@ -57,6 +57,8 @@ int omap_type(void)
 		val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
 	} else if (cpu_is_omap34xx()) {
 		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
+	} else if (cpu_is_omap44xx()) {
+		val = omap_ctrl_readl(OMAP44XX_CONTROL_STATUS);
 	} else {
 		pr_err("Cannot detect omap type!\n");
 		goto out;
@@ -175,6 +177,8 @@ void __init omap3_check_features(void)
 	OMAP3_CHECK_FEATURE(status, SGX);
 	OMAP3_CHECK_FEATURE(status, NEON);
 	OMAP3_CHECK_FEATURE(status, ISP);
+	if (cpu_is_omap3630())
+		omap3_features |= OMAP3_HAS_192MHZ_CLK;
 
 	/*
 	 * TODO: Get additional info (where applicable)
@@ -281,6 +285,7 @@ void __init omap4_check_revision(void)
 
 	if ((hawkeye == 0xb852) && (rev == 0x0)) {
 		omap_revision = OMAP4430_REV_ES1_0;
+		omap_chip.oc |= CHIP_IS_OMAP4430ES1;
 		pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name);
 		return;
 	}
@@ -358,6 +363,7 @@ void __init omap3_cpuinfo(void)
 	OMAP3_SHOW_FEATURE(sgx);
 	OMAP3_SHOW_FEATURE(neon);
 	OMAP3_SHOW_FEATURE(isp);
+	OMAP3_SHOW_FEATURE(192mhz_clk);
 
 	printk(")\n");
 }