소스 검색

[POWERPC] mpc82xx: Remove a bunch of cruft that duplicates generic functionality.

m82xx_calibrate_decr(), mpc82xx_ads_show_cpuinfo(), and mpc82xx_halt() do
anything useful beyond what the generic code does.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Scott Wood 18 년 전
부모
커밋
4ff62e1c7f
4개의 변경된 파일2개의 추가작업 그리고 125개의 파일을 삭제
  1. 0 1
      arch/powerpc/platforms/82xx/Makefile
  2. 0 109
      arch/powerpc/platforms/82xx/mpc82xx.c
  3. 2 9
      arch/powerpc/platforms/82xx/mpc82xx_ads.c
  4. 0 6
      arch/powerpc/platforms/82xx/pq2ads.h

+ 0 - 1
arch/powerpc/platforms/82xx/Makefile

@@ -1,5 +1,4 @@
 #
 # Makefile for the PowerPC 82xx linux kernel.
 #
-obj-$(CONFIG_PPC_82xx) += mpc82xx.o
 obj-$(CONFIG_MPC82xx_ADS) += mpc82xx_ads.o

+ 0 - 109
arch/powerpc/platforms/82xx/mpc82xx.c

@@ -1,109 +0,0 @@
-/*
- * MPC82xx setup and early boot code plus other random bits.
- *
- * Author: Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * Copyright (c) 2006 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/initrd.h>
-#include <linux/module.h>
-#include <linux/fsl_devices.h>
-#include <linux/fs_uart_pd.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc8260.h>
-#include <asm/irq.h>
-#include <mm/mmu_decl.h>
-#include <asm/prom.h>
-#include <asm/cpm2.h>
-#include <asm/udbg.h>
-#include <asm/i8259.h>
-#include <linux/fs_enet_pd.h>
-
-#include <sysdev/fsl_soc.h>
-#include <sysdev/cpm2_pic.h>
-
-#include "pq2ads.h"
-
-static int __init get_freq(char *name, unsigned long *val)
-{
-	struct device_node *cpu;
-	const unsigned int *fp;
-	int found = 0;
-
-	/* The cpu node should have timebase and clock frequency properties */
-	cpu = of_find_node_by_type(NULL, "cpu");
-
-	if (cpu) {
-		fp = of_get_property(cpu, name, NULL);
-		if (fp) {
-			found = 1;
-			*val = *fp;
-		}
-
-		of_node_put(cpu);
-	}
-
-	return found;
-}
-
-void __init m82xx_calibrate_decr(void)
-{
-	ppc_tb_freq = 125000000;
-	if (!get_freq("bus-frequency", &ppc_tb_freq)) {
-		printk(KERN_ERR "WARNING: Estimating decrementer frequency "
-				"(not found)\n");
-	}
-	ppc_tb_freq /= 4;
-	ppc_proc_freq = 1000000000;
-	if (!get_freq("clock-frequency", &ppc_proc_freq))
-		printk(KERN_ERR "WARNING: Estimating processor frequency"
-				"(not found)\n");
-}
-
-void mpc82xx_ads_show_cpuinfo(struct seq_file *m)
-{
-	uint pvid, svid, phid1;
-	uint memsize = total_memory;
-
-	pvid = mfspr(SPRN_PVR);
-	svid = mfspr(SPRN_SVR);
-
-	seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
-	seq_printf(m, "Machine\t\t: %s\n", CPUINFO_MACHINE);
-	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
-	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-
-	/* Display cpu Pll setting */
-	phid1 = mfspr(SPRN_HID1);
-	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
-	/* Display the amount of memory */
-	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
-}

+ 2 - 9
arch/powerpc/platforms/82xx/mpc82xx_ads.c

@@ -612,20 +612,13 @@ static void m82xx_restart(char *cmd)
 	while (1) ;
 }
 
-static void m82xx_halt(void)
-{
-	local_irq_disable();
-	while (1) ;
-}
-
 define_machine(mpc82xx_ads)
 {
 	.name = "MPC82xx ADS",
 	.probe = mpc82xx_ads_probe,
 	.setup_arch =    mpc82xx_ads_setup_arch,
 	.init_IRQ =    mpc82xx_ads_pic_init,
-	.show_cpuinfo =    mpc82xx_ads_show_cpuinfo,
 	.get_irq =    cpm2_get_irq,
-	.calibrate_decr =    m82xx_calibrate_decr,
-	.restart = m82xx_restart,.halt = m82xx_halt,
+	.calibrate_decr = generic_calibrate_decr,
+	.restart = m82xx_restart,
 };

+ 0 - 6
arch/powerpc/platforms/82xx/pq2ads.h

@@ -24,10 +24,6 @@
 
 #include <linux/seq_file.h>
 
-/* For our show_cpuinfo hooks. */
-#define CPUINFO_VENDOR		"Freescale Semiconductor"
-#define CPUINFO_MACHINE		"PQ2 ADS PowerPC"
-
 /* Backword-compatibility stuff for the drivers */
 #define CPM_MAP_ADDR		((uint)0xf0000000)
 #define CPM_IRQ_OFFSET 0
@@ -58,8 +54,6 @@
 #define SIU_INT_SCC4		((uint)0x2b+CPM_IRQ_OFFSET)
 
 void m82xx_pci_init_irq(void);
-void mpc82xx_ads_show_cpuinfo(struct seq_file*);
-void m82xx_calibrate_decr(void);
 
 #endif /* __MACH_ADS8260_DEFS */
 #endif /* __KERNEL__ */