Merge tag 'fixes-for-v3.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

  usb: fixes for v3.9-rc3

  Most fixes are on 'musb' driver. There's a sparse warning
  fix which marks omap2430_glue as static, a build warning
  fix which was found with randconfig, a fix for omap_musb_mailbox
  check and removal of 'select' from musb's Kconfig to prevent
  Kconfig warnings.

  Other than that, pxa25x got a fix which was introduced by the
  latest conversion to udc_start/udc_stop patchset, kernel-doc
  warnings for composite layer  and dwc3 got a build fix on
  sparc64.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/dwc3/ep0.c

@@ -891,7 +891,8 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 				DWC3_TRBCTL_CONTROL_DATA);
 	} else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
 			&& (dep->number == 0)) {
-		u32		transfer_size;
+		u32	transfer_size;
+		u32	maxpacket;
 
 		ret = usb_gadget_map_request(&dwc->gadget, &req->request,
 				dep->number);
@@ -902,8 +903,8 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 
 		WARN_ON(req->request.length > DWC3_EP0_BOUNCE_SIZE);
 
-		transfer_size = roundup(req->request.length,
-				(u32) dep->endpoint.maxpacket);
+		maxpacket = dep->endpoint.maxpacket;
+		transfer_size = roundup(req->request.length, maxpacket);
 
 		dwc->ep0_bounced = true;
 

drivers/usb/gadget/composite.c

@@ -1757,10 +1757,7 @@ static const struct usb_gadget_driver composite_driver_template = {
 /**
  * usb_composite_probe() - register a composite driver
  * @driver: the driver to register
- * @bind: the callback used to allocate resources that are shared across the
- *	whole device, such as string IDs, and add its configurations using
- *	@usb_add_config().  This may fail by returning a negative errno
- *	value; it should return zero on successful initialization.
+ *
  * Context: single threaded during gadget setup
  *
  * This function is used to register drivers using the composite driver

drivers/usb/gadget/pxa25x_udc.c

@@ -1303,6 +1303,10 @@ stop_activity(struct pxa25x_udc *dev, struct usb_gadget_driver *driver)
 	}
 	del_timer_sync(&dev->timer);
 
+	/* report disconnect; the driver is already quiesced */
+	if (driver)
+		driver->disconnect(&dev->gadget);
+
 	/* re-init driver-visible data structures */
 	udc_reinit(dev);
 }

drivers/usb/musb/Kconfig

@@ -7,9 +7,6 @@
 config USB_MUSB_HDRC
 	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
 	depends on USB && USB_GADGET
-	select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN)
-	select NOP_USB_XCEIV if (SOC_TI81XX || SOC_AM33XX)
-	select OMAP_CONTROL_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
 	select USB_OTG_UTILS
 	help
 	  Say Y here if your system has a dual role high speed USB
@@ -49,8 +46,6 @@ config USB_MUSB_TUSB6010
 config USB_MUSB_OMAP2PLUS
 	tristate "OMAP2430 and onwards"
 	depends on ARCH_OMAP2PLUS
-	select TWL4030_USB if MACH_OMAP_3430SDP
-	select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
 
 config USB_MUSB_AM35X
 	tristate "AM35x"

drivers/usb/musb/musb_core.c

@@ -1968,11 +1968,9 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	if (status < 0)
 		goto fail4;
 
-#ifdef CONFIG_SYSFS
 	status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group);
 	if (status)
 		goto fail5;
-#endif
 
 	pm_runtime_put(musb->controller);
 

drivers/usb/musb/omap2430.c

@@ -51,7 +51,7 @@ struct omap2430_glue {
 };
 #define glue_to_musb(g)		platform_get_drvdata(g->musb)
 
-struct omap2430_glue		*_glue;
+static struct omap2430_glue	*_glue;
 
 static struct timer_list musb_idle_timer;
 
@@ -237,9 +237,13 @@ void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
 {
 	struct omap2430_glue	*glue = _glue;
 
-	if (glue && glue_to_musb(glue)) {
-		glue->status = status;
-	} else {
+	if (!glue) {
+		pr_err("%s: musb core is not yet initialized\n", __func__);
+		return;
+	}
+	glue->status = status;
+
+	if (!glue_to_musb(glue)) {
 		pr_err("%s: musb core is not yet ready\n", __func__);
 		return;
 	}

include/linux/usb/composite.h

@@ -60,7 +60,7 @@ struct usb_configuration;
  * @name: For diagnostics, identifies the function.
  * @strings: tables of strings, keyed by identifiers assigned during bind()
  *	and by language IDs provided in control requests
- * @descriptors: Table of full (or low) speed descriptors, using interface and
+ * @fs_descriptors: Table of full (or low) speed descriptors, using interface and
  *	string identifiers assigned during @bind().  If this pointer is null,
  *	the function will not be available at full speed (or at low speed).
  * @hs_descriptors: Table of high speed descriptors, using interface and
@@ -290,6 +290,7 @@ enum {
  *	after function notifications
  * @resume: Notifies configuration when the host restarts USB traffic,
  *	before function notifications
+ * @gadget_driver: Gadget driver controlling this driver
  *
  * Devices default to reporting self powered operation.  Devices which rely
  * on bus powered operation should report this in their @bind method.