Merge tag 'boards-3.12' of git://git.infradead.org/linux-mvebu into next/boards

From Jason Cooper:
mvebu boards changes for v3.12

 - convert kirkwood, dove, orion5x to DT init of mv643xx_eth
    - _lots_ of board code removal :)
 - convert kirkwood, dove and orion5x to DT init of clocksource and irqchip

* tag 'boards-3.12' of git://git.infradead.org/linux-mvebu:
  ARM: plat-orion: add reg offset to DT irq driver stub
  ARM: kirkwood: remove obsolete SDIO clock gate workaround
  ARM: kirkwood: convert to DT irqchip and clocksource
  ARM: dove: convert to DT irqchip and clocksource
  ARM: orion5x: update intc device tree node to new reg layout
  ARM: kirkwood: move device tree nodes to DT irqchip and clocksource
  ARM: dove: move device tree nodes to DT irqchip and clocksource
  ARM: orion5x: remove legacy mv643xx_eth board setup
  ARM: kirkwood: remove legacy clk alias for mv643xx_eth
  ARM: kirkwood: remove redundant DT board files
  ARM: dove: remove legacy mv643xx_eth setup
  ARM: orion5x: add gigabit ethernet and mvmdio device tree nodes
  ARM: kirkwood: add gigabit ethernet and mvmdio device tree nodes
  ARM: dove: add gigabit ethernet and mvmdio device tree nodes
  + Linux 3.11-rc2

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/cpu-hotplug.txt

@@ -267,8 +267,8 @@ Q: If i have some kernel code that needs to be aware of CPU arrival and
 A: This is what you would need in your kernel code to receive notifications.
 
 	#include <linux/cpu.h>
-	static int __cpuinit foobar_cpu_callback(struct notifier_block *nfb,
-					    unsigned long action, void *hcpu)
+	static int foobar_cpu_callback(struct notifier_block *nfb,
+				       unsigned long action, void *hcpu)
 	{
 		unsigned int cpu = (unsigned long)hcpu;
 
@@ -285,7 +285,7 @@ A: This is what you would need in your kernel code to receive notifications.
 		return NOTIFY_OK;
 	}
 
-	static struct notifier_block __cpuinitdata foobar_cpu_notifer =
+	static struct notifier_block foobar_cpu_notifer =
 	{
 	   .notifier_call = foobar_cpu_callback,
 	};

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 11
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Linux for Workgroups
 
 # *DOCUMENTATION*

arch/alpha/kernel/smp.c

@@ -116,7 +116,7 @@ wait_boot_cpu_to_stop(int cpuid)
 /*
  * Where secondaries begin a life of C.
  */
-void __cpuinit
+void
 smp_callin(void)
 {
 	int cpuid = hard_smp_processor_id();
@@ -194,7 +194,7 @@ wait_for_txrdy (unsigned long cpumask)
  * Send a message to a secondary's console.  "START" is one such
  * interesting message.  ;-)
  */
-static void __cpuinit
+static void
 send_secondary_console_msg(char *str, int cpuid)
 {
 	struct percpu_struct *cpu;
@@ -285,7 +285,7 @@ recv_secondary_console_msg(void)
 /*
  * Convince the console to have a secondary cpu begin execution.
  */
-static int __cpuinit
+static int
 secondary_cpu_start(int cpuid, struct task_struct *idle)
 {
 	struct percpu_struct *cpu;
@@ -356,7 +356,7 @@ secondary_cpu_start(int cpuid, struct task_struct *idle)
 /*
  * Bring one cpu online.
  */
-static int __cpuinit
+static int
 smp_boot_one_cpu(int cpuid, struct task_struct *idle)
 {
 	unsigned long timeout;
@@ -472,7 +472,7 @@ smp_prepare_boot_cpu(void)
 {
 }
 
-int __cpuinit
+int
 __cpu_up(unsigned int cpu, struct task_struct *tidle)
 {
 	smp_boot_one_cpu(cpu, tidle);

arch/alpha/kernel/traps.c

@@ -32,7 +32,7 @@
 
 static int opDEC_fix;
 
-static void __cpuinit
+static void
 opDEC_check(void)
 {
 	__asm__ __volatile__ (
@@ -1059,7 +1059,7 @@ give_sigbus:
 	return;
 }
 
-void __cpuinit
+void
 trap_init(void)
 {
 	/* Tell PAL-code what global pointer we want in the kernel.  */

arch/arm/boot/dts/dove-cubox.dts

@@ -57,6 +57,13 @@
 
 &uart0 { status = "okay"; };
 &sata0 { status = "okay"; };
+&mdio { status = "okay"; };
+&eth { status = "okay"; };
+
+&ethphy {
+	compatible = "marvell,88e1310";
+	reg = <1>;
+};
 
 &i2c0 {
 	status = "okay";

arch/arm/boot/dts/dove.dtsi

@@ -30,11 +30,28 @@
 			marvell,tauros2-cache-features = <0>;
 		};
 
-		intc: interrupt-controller {
+		timer: timer@20300 {
+			compatible = "marvell,orion-timer";
+			reg = <0x20300 0x20>;
+			interrupt-parent = <&bridge_intc>;
+			interrupts = <1>, <2>;
+			clocks = <&core_clk 0>;
+		};
+
+		intc: main-interrupt-ctrl@20200 {
 			compatible = "marvell,orion-intc";
 			interrupt-controller;
 			#interrupt-cells = <1>;
-			reg = <0x20204 0x04>, <0x20214 0x04>;
+			reg = <0x20200 0x10>, <0x20210 0x10>;
+		};
+
+		bridge_intc: bridge-interrupt-ctrl@20110 {
+			compatible = "marvell,orion-bridge-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x20110 0x8>;
+			interrupts = <0>;
+			marvell,#interrupts = <5>;
 		};
 
 		core_clk: core-clocks@d0214 {
@@ -258,5 +275,40 @@
 				dmacap,xor;
 			};
 		};
+
+		mdio: mdio-bus@72004 {
+			compatible = "marvell,orion-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x72004 0x84>;
+			interrupts = <30>;
+			clocks = <&gate_clk 2>;
+			status = "disabled";
+
+			ethphy: ethernet-phy {
+				device-type = "ethernet-phy";
+				/* set phy address in board file */
+			};
+		};
+
+		eth: ethernet-controller@72000 {
+			compatible = "marvell,orion-eth";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x72000 0x4000>;
+			clocks = <&gate_clk 2>;
+			marvell,tx-checksum-limit = <1600>;
+			status = "disabled";
+
+			ethernet-port@0 {
+				device_type = "network";
+				compatible = "marvell,orion-eth-port";
+				reg = <0>;
+				interrupts = <29>;
+				/* overwrite MAC address in bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				phy-handle = <&ethphy>;
+			};
+		};
 	};
 };

arch/arm/boot/dts/kirkwood-cloudbox.dts

@@ -89,3 +89,19 @@
 		gpios = <&gpio0 17 0>;
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};

arch/arm/boot/dts/kirkwood-db.dtsi

@@ -87,3 +87,19 @@
 		};
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};

arch/arm/boot/dts/kirkwood-dnskw.dtsi

@@ -219,3 +219,19 @@
 		};
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};

arch/arm/boot/dts/kirkwood-dockstar.dts

@@ -90,3 +90,20 @@
 		};
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		compatible = "marvell,88e1116";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};

arch/arm/boot/dts/kirkwood-dreamplug.dts

@@ -99,3 +99,31 @@
 		};
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};

arch/arm/boot/dts/kirkwood-goflexnet.dts

@@ -170,3 +170,19 @@
 		};
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};

arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts

@@ -96,3 +96,33 @@
 		};
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		compatible = "marvell,88e1121";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		compatible = "marvell,88e1121";
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};

arch/arm/boot/dts/kirkwood-ib62x0.dts

@@ -122,3 +122,19 @@
 
 
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};

arch/arm/boot/dts/kirkwood-iconnect.dts

@@ -176,3 +176,19 @@
 		};
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@11 {
+		device_type = "ethernet-phy";
+		reg = <11>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};

arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts

@@ -194,3 +194,27 @@
 		};
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy1: ethernet-phy@11 {
+		device_type = "ethernet-phy";
+		reg = <11>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};

arch/arm/boot/dts/kirkwood-is2.dts

@@ -30,3 +30,5 @@
 		};
 	};
 };
+
+&ethphy0 { reg = <8>; };

arch/arm/boot/dts/kirkwood-km_kirkwood.dts

@@ -50,3 +50,19 @@
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};

arch/arm/boot/dts/kirkwood-lsxl.dtsi

@@ -207,3 +207,31 @@
 		};
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};

arch/arm/boot/dts/kirkwood-mplcec4.dts

@@ -191,3 +191,30 @@
 	};
 };
 
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		reg = <1>;
+	};
+
+	ethphy1: ethernet-phy@2 {
+		device_type = "ethernet-phy";
+		reg = <2>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};

arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts

@@ -184,3 +184,19 @@
                 };
         };
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};

arch/arm/boot/dts/kirkwood-ns2-common.dtsi

@@ -84,3 +84,19 @@
 	};
 
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy {
+		device_type = "ethernet-phy";
+                /* overwrite reg property in board file */
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};

arch/arm/boot/dts/kirkwood-ns2.dts

@@ -30,3 +30,5 @@
 		};
 	};
 };
+
+&ethphy0 { reg = <8>; };

arch/arm/boot/dts/kirkwood-ns2lite.dts

@@ -30,3 +30,5 @@
 		};
 	};
 };
+
+&ethphy0 { reg = <0>; };

arch/arm/boot/dts/kirkwood-ns2max.dts

@@ -49,3 +49,5 @@
 		};
 	};
 };
+
+&ethphy0 { reg = <8>; };

arch/arm/boot/dts/kirkwood-ns2mini.dts

@@ -50,3 +50,5 @@
 		};
 	};
 };
+
+&ethphy0 { reg = <0>; };

arch/arm/boot/dts/kirkwood-openblocks_a6.dts

@@ -166,3 +166,19 @@
 		};
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};

arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi

@@ -91,3 +91,19 @@
 		};
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};

arch/arm/boot/dts/kirkwood-topkick.dts

@@ -203,3 +203,19 @@
 		};
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};

arch/arm/boot/dts/kirkwood-ts219-6281.dts

@@ -50,4 +50,6 @@
 			gpios = <&gpio0 16 1>;
 		};
 	};
-};
+};
+
+&ethphy0 { reg = <8>; };

arch/arm/boot/dts/kirkwood-ts219-6282.dts

@@ -58,4 +58,6 @@
 			gpios = <&gpio1 5 1>;
 		};
 	};
-};
+};
+
+&ethphy0 { reg = <0>; };

arch/arm/boot/dts/kirkwood-ts219.dtsi

@@ -96,3 +96,19 @@
 		};
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy {
+		device_type = "ethernet-phy";
+                /* overwrite reg property in board file */
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};

arch/arm/boot/dts/kirkwood.dtsi

@@ -20,13 +20,6 @@
 	       gpio0 = &gpio0;
 	       gpio1 = &gpio1;
 	};
-	intc: interrupt-controller {
-		compatible = "marvell,orion-intc", "marvell,intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0xf1020204 0x04>,
-		      <0xf1020214 0x04>;
-	};
 
 	ocp@f1000000 {
 		compatible = "simple-bus";
@@ -37,6 +30,30 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
+		timer: timer@20300 {
+			compatible = "marvell,orion-timer";
+			reg = <0x20300 0x20>;
+			interrupt-parent = <&bridge_intc>;
+			interrupts = <1>, <2>;
+			clocks = <&core_clk 0>;
+		};
+
+		intc: main-interrupt-ctrl@20200 {
+			compatible = "marvell,orion-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x20200 0x10>, <0x20210 0x10>;
+		};
+
+		bridge_intc: bridge-interrupt-ctrl@20110 {
+			compatible = "marvell,orion-bridge-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x20110 0x8>;
+			interrupts = <1>;
+			marvell,#interrupts = <6>;
+		};
+
 		core_clk: core-clocks@10030 {
 			compatible = "marvell,kirkwood-core-clock";
 			reg = <0x10030 0x4>;
@@ -103,9 +120,11 @@
 			#clock-cells = <1>;
 		};
 
-		wdt@20300 {
+		wdt: watchdog-timer@20300 {
 			compatible = "marvell,orion-wdt";
 			reg = <0x20300 0x28>;
+			interrupt-parent = <&bridge_intc>;
+			interrupts = <3>;
 			clocks = <&gate_clk 7>;
 			status = "okay";
 		};
@@ -192,5 +211,57 @@
 			clocks = <&gate_clk 17>;
 			status = "okay";
 		};
+
+		mdio: mdio-bus@72004 {
+			compatible = "marvell,orion-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x72004 0x84>;
+			interrupts = <46>;
+			clocks = <&gate_clk 0>;
+			status = "disabled";
+
+			/* add phy nodes in board file */
+		};
+
+		eth0: ethernet-controller@72000 {
+			compatible = "marvell,kirkwood-eth";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x72000 0x4000>;
+			clocks = <&gate_clk 0>;
+			marvell,tx-checksum-limit = <1600>;
+			status = "disabled";
+
+			ethernet0-port@0 {
+				device_type = "network";
+				compatible = "marvell,kirkwood-eth-port";
+				reg = <0>;
+				interrupts = <11>;
+				/* overwrite MAC address in bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				/* set phy-handle property in board file */
+			};
+		};
+
+		eth1: ethernet-controller@76000 {
+			compatible = "marvell,kirkwood-eth";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x76000 0x4000>;
+			clocks = <&gate_clk 19>;
+			marvell,tx-checksum-limit = <1600>;
+			status = "disabled";
+
+			ethernet1-port@0 {
+				device_type = "network";
+				compatible = "marvell,kirkwood-eth-port";
+				reg = <0>;
+				interrupts = <15>;
+				/* overwrite MAC address in bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				/* set phy-handle property in board file */
+			};
+		};
 	};
 };

arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts

@@ -53,3 +53,20 @@
 		};
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		device-type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};

arch/arm/boot/dts/orion5x.dtsi

@@ -16,11 +16,12 @@
 	aliases {
 		gpio0 = &gpio0;
 	};
+
 	intc: interrupt-controller {
-		compatible = "marvell,orion-intc", "marvell,intc";
+		compatible = "marvell,orion-intc";
 		interrupt-controller;
 		#interrupt-cells = <1>;
-		reg = <0xf1020204 0x04>;
+		reg = <0xf1020200 0x08>;
 	};
 
 	ocp@f1000000 {
@@ -132,5 +133,34 @@
 			interrupts = <28>;
 			status = "okay";
 		};
+
+		mdio: mdio-bus@72004 {
+			compatible = "marvell,orion-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x72004 0x84>;
+			interrupts = <22>;
+			status = "disabled";
+
+			/* add phy nodes in board file */
+		};
+
+		eth: ethernet-controller@72000 {
+			compatible = "marvell,orion-eth";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x72000 0x4000>;
+			marvell,tx-checksum-limit = <1600>;
+			status = "disabled";
+
+			ethernet-port@0 {
+				device_type = "network";
+				compatible = "marvell,orion-eth-port";
+				reg = <0>;
+				/* overwrite MAC address in bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				/* set phy-handle property in board file */
+			};
+		};
 	};
 };

arch/arm/common/mcpm_platsmp.c

@@ -19,7 +19,7 @@
 #include <asm/smp.h>
 #include <asm/smp_plat.h>
 
-static int __cpuinit mcpm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int mcpm_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned int mpidr, pcpu, pcluster, ret;
 	extern void secondary_startup(void);
@@ -40,7 +40,7 @@ static int __cpuinit mcpm_boot_secondary(unsigned int cpu, struct task_struct *i
 	return 0;
 }
 
-static void __cpuinit mcpm_secondary_init(unsigned int cpu)
+static void mcpm_secondary_init(unsigned int cpu)
 {
 	mcpm_cpu_powered_up();
 }

arch/arm/configs/kirkwood_defconfig

@@ -29,30 +29,7 @@ CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_T5325=y
 CONFIG_MACH_TS219=y
 CONFIG_MACH_TS41X=y
-CONFIG_MACH_CLOUDBOX_DT=y
-CONFIG_MACH_DB88F628X_BP_DT=y
 CONFIG_MACH_DLINK_KIRKWOOD_DT=y
-CONFIG_MACH_DOCKSTAR_DT=y
-CONFIG_MACH_DREAMPLUG_DT=y
-CONFIG_MACH_GOFLEXNET_DT=y
-CONFIG_MACH_GURUPLUG_DT=y
-CONFIG_MACH_IB62X0_DT=y
-CONFIG_MACH_ICONNECT_DT=y
-CONFIG_MACH_INETSPACE_V2_DT=y
-CONFIG_MACH_IOMEGA_IX2_200_DT=y
-CONFIG_MACH_KM_KIRKWOOD_DT=y
-CONFIG_MACH_LSXL_DT=y
-CONFIG_MACH_MPLCEC4_DT=y
-CONFIG_MACH_NETSPACE_LITE_V2_DT=y
-CONFIG_MACH_NETSPACE_MAX_V2_DT=y
-CONFIG_MACH_NETSPACE_MINI_V2_DT=y
-CONFIG_MACH_NETSPACE_V2_DT=y
-CONFIG_MACH_NSA310_DT=y
-CONFIG_MACH_OPENBLOCKS_A6_DT=y
-CONFIG_MACH_READYNAS_DT=y
-CONFIG_MACH_SHEEVAPLUG_DT=y
-CONFIG_MACH_TOPKICK_DT=y
-CONFIG_MACH_TS219_DT=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
 CONFIG_PCI_MVEBU=y
 CONFIG_PREEMPT=y

arch/arm/include/asm/arch_timer.h

@@ -89,7 +89,7 @@ static inline u64 arch_counter_get_cntvct(void)
 	return cval;
 }
 
-static inline void __cpuinit arch_counter_set_user_access(void)
+static inline void arch_counter_set_user_access(void)
 {
 	u32 cntkctl;
 

arch/arm/kernel/head-common.S

@@ -149,7 +149,6 @@ ENDPROC(lookup_processor_type)
  *	r5 = proc_info pointer in physical address space
  *	r9 = cpuid (preserved)
  */
-	__CPUINIT
 __lookup_processor_type:
 	adr	r3, __lookup_processor_type_data
 	ldmia	r3, {r4 - r6}

arch/arm/kernel/head-nommu.S

@@ -87,7 +87,6 @@ ENTRY(stext)
 ENDPROC(stext)
 
 #ifdef CONFIG_SMP
-	__CPUINIT
 ENTRY(secondary_startup)
 	/*
 	 * Common entry point for secondary CPUs.

arch/arm/kernel/head.S

@@ -343,7 +343,6 @@ __turn_mmu_on_loc:
 	.long	__turn_mmu_on_end
 
 #if defined(CONFIG_SMP)
-	__CPUINIT
 ENTRY(secondary_startup)
 	/*
 	 * Common entry point for secondary CPUs.

arch/arm/kernel/hw_breakpoint.c

@@ -1020,7 +1020,7 @@ out_mdbgen:
 		cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu));
 }
 
-static int __cpuinit dbg_reset_notify(struct notifier_block *self,
+static int dbg_reset_notify(struct notifier_block *self,
 				      unsigned long action, void *cpu)
 {
 	if ((action & ~CPU_TASKS_FROZEN) == CPU_ONLINE)
@@ -1029,7 +1029,7 @@ static int __cpuinit dbg_reset_notify(struct notifier_block *self,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __cpuinitdata dbg_reset_nb = {
+static struct notifier_block dbg_reset_nb = {
 	.notifier_call = dbg_reset_notify,
 };
 

arch/arm/kernel/perf_event_cpu.c

@@ -157,8 +157,8 @@ static void cpu_pmu_init(struct arm_pmu *cpu_pmu)
  * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
  * junk values out of them.
  */
-static int __cpuinit cpu_pmu_notify(struct notifier_block *b,
-				    unsigned long action, void *hcpu)
+static int cpu_pmu_notify(struct notifier_block *b, unsigned long action,
+			  void *hcpu)
 {
 	if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
 		return NOTIFY_DONE;
@@ -171,7 +171,7 @@ static int __cpuinit cpu_pmu_notify(struct notifier_block *b,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __cpuinitdata cpu_pmu_hotplug_notifier = {
+static struct notifier_block cpu_pmu_hotplug_notifier = {
 	.notifier_call = cpu_pmu_notify,
 };
 

arch/arm/kernel/psci_smp.c

@@ -46,8 +46,7 @@
 
 extern void secondary_startup(void);
 
-static int __cpuinit psci_boot_secondary(unsigned int cpu,
-					 struct task_struct *idle)
+static int psci_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	if (psci_ops.cpu_on)
 		return psci_ops.cpu_on(cpu_logical_map(cpu),

arch/arm/kernel/smp.c

@@ -58,7 +58,7 @@ struct secondary_data secondary_data;
  * control for which core is the next to come out of the secondary
  * boot "holding pen"
  */
-volatile int __cpuinitdata pen_release = -1;
+volatile int pen_release = -1;
 
 enum ipi_msg_type {
 	IPI_WAKEUP,
@@ -86,7 +86,7 @@ static unsigned long get_arch_pgd(pgd_t *pgd)
 	return pgdir >> ARCH_PGD_SHIFT;
 }
 
-int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
+int __cpu_up(unsigned int cpu, struct task_struct *idle)
 {
 	int ret;
 
@@ -138,7 +138,7 @@ void __init smp_init_cpus(void)
 		smp_ops.smp_init_cpus();
 }
 
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+int boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	if (smp_ops.smp_boot_secondary)
 		return smp_ops.smp_boot_secondary(cpu, idle);
@@ -170,7 +170,7 @@ static int platform_cpu_disable(unsigned int cpu)
 /*
  * __cpu_disable runs on the processor to be shutdown.
  */
-int __cpuinit __cpu_disable(void)
+int __cpu_disable(void)
 {
 	unsigned int cpu = smp_processor_id();
 	int ret;
@@ -216,7 +216,7 @@ static DECLARE_COMPLETION(cpu_died);
  * called on the thread which is asking for a CPU to be shutdown -
  * waits until shutdown has completed, or it is timed out.
  */
-void __cpuinit __cpu_die(unsigned int cpu)
+void __cpu_die(unsigned int cpu)
 {
 	if (!wait_for_completion_timeout(&cpu_died, msecs_to_jiffies(5000))) {
 		pr_err("CPU%u: cpu didn't die\n", cpu);
@@ -306,7 +306,7 @@ void __ref cpu_die(void)
  * Called by both boot and secondaries to move global data into
  * per-processor storage.
  */
-static void __cpuinit smp_store_cpu_info(unsigned int cpuid)
+static void smp_store_cpu_info(unsigned int cpuid)
 {
 	struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid);
 
@@ -322,7 +322,7 @@ static void percpu_timer_setup(void);
  * This is the secondary CPU boot entry.  We're using this CPUs
  * idle thread stack, but a set of temporary page tables.
  */
-asmlinkage void __cpuinit secondary_start_kernel(void)
+asmlinkage void secondary_start_kernel(void)
 {
 	struct mm_struct *mm = &init_mm;
 	unsigned int cpu;
@@ -521,7 +521,7 @@ static void broadcast_timer_set_mode(enum clock_event_mode mode,
 {
 }
 
-static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt)
+static void broadcast_timer_setup(struct clock_event_device *evt)
 {
 	evt->name	= "dummy_timer";
 	evt->features	= CLOCK_EVT_FEAT_ONESHOT |
@@ -550,7 +550,7 @@ int local_timer_register(struct local_timer_ops *ops)
 }
 #endif
 
-static void __cpuinit percpu_timer_setup(void)
+static void percpu_timer_setup(void)
 {
 	unsigned int cpu = smp_processor_id();
 	struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);

arch/arm/kernel/smp_twd.c

@@ -187,7 +187,7 @@ core_initcall(twd_cpufreq_init);
 
 #endif
 
-static void __cpuinit twd_calibrate_rate(void)
+static void twd_calibrate_rate(void)
 {
 	unsigned long count;
 	u64 waitjiffies;
@@ -265,7 +265,7 @@ static void twd_get_clock(struct device_node *np)
 /*
  * Setup the local clock events for a CPU.
  */
-static int __cpuinit twd_timer_setup(struct clock_event_device *clk)
+static int twd_timer_setup(struct clock_event_device *clk)
 {
 	struct clock_event_device **this_cpu_clk;
 	int cpu = smp_processor_id();
@@ -308,7 +308,7 @@ static int __cpuinit twd_timer_setup(struct clock_event_device *clk)
 	return 0;
 }
 
-static struct local_timer_ops twd_lt_ops __cpuinitdata = {
+static struct local_timer_ops twd_lt_ops = {
 	.setup	= twd_timer_setup,
 	.stop	= twd_timer_stop,
 };

arch/arm/lib/delay.c

@@ -86,7 +86,7 @@ void __init register_current_timer_delay(const struct delay_timer *timer)
 	}
 }
 
-unsigned long __cpuinit calibrate_delay_is_known(void)
+unsigned long calibrate_delay_is_known(void)
 {
 	delay_calibrated = true;
 	return lpj_fine;

arch/arm/mach-dove/Kconfig

@@ -23,6 +23,8 @@ config MACH_CM_A510
 config MACH_DOVE_DT
 	bool "Marvell Dove Flattened Device Tree"
 	select DOVE_CLK
+	select ORION_IRQCHIP
+	select ORION_TIMER
 	select REGULATOR
 	select REGULATOR_FIXED_VOLTAGE
 	select USE_OF

arch/arm/mach-dove/Makefile

@@ -1,5 +1,5 @@
-obj-y				+= common.o irq.o
-obj-$(CONFIG_DOVE_LEGACY)	+= mpp.o
+obj-y				+= common.o
+obj-$(CONFIG_DOVE_LEGACY)	+= irq.o mpp.o
 obj-$(CONFIG_PCI)		+= pcie.o
 obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o
 obj-$(CONFIG_MACH_DOVE_DT)	+= board-dt.o

arch/arm/mach-dove/board-dt.c

@@ -10,11 +10,14 @@
 
 #include <linux/init.h>
 #include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/irqchip.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/platform_data/usb-ehci-orion.h>
 #include <asm/hardware/cache-tauros2.h>
 #include <asm/mach/arch.h>
+#include <mach/dove.h>
 #include <mach/pm.h>
 #include <plat/common.h>
 #include <plat/irq.h>
@@ -33,10 +36,6 @@ static void __init dove_legacy_clk_init(void)
 	clkspec.np = np;
 	clkspec.args_count = 1;
 
-	clkspec.args[0] = CLOCK_GATING_BIT_GBE;
-	orion_clkdev_add(NULL, "mv643xx_eth_port.0",
-			 of_clk_get_from_provider(&clkspec));
-
 	clkspec.args[0] = CLOCK_GATING_BIT_PCIE0;
 	orion_clkdev_add("0", "pcie",
 			 of_clk_get_from_provider(&clkspec));
@@ -46,15 +45,18 @@ static void __init dove_legacy_clk_init(void)
 			 of_clk_get_from_provider(&clkspec));
 }
 
-static void __init dove_of_clk_init(void)
+static void __init dove_dt_time_init(void)
 {
 	of_clk_init(NULL);
-	dove_legacy_clk_init();
+	clocksource_of_init();
 }
 
-static struct mv643xx_eth_platform_data dove_dt_ge00_data = {
-	.phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
-};
+static void __init dove_dt_init_early(void)
+{
+	mvebu_mbus_init("marvell,dove-mbus",
+			BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
+			DOVE_MC_WINS_BASE, DOVE_MC_WINS_SZ);
+}
 
 static void __init dove_dt_init(void)
 {
@@ -65,11 +67,10 @@ static void __init dove_dt_init(void)
 #endif
 	dove_setup_cpu_wins();
 
-	/* Setup root of clk tree */
-	dove_of_clk_init();
+	/* Setup clocks for legacy devices */
+	dove_legacy_clk_init();
 
 	/* Internal devices not ported to DT yet */
-	dove_ge00_init(&dove_dt_ge00_data);
 	dove_pcie_init(1, 1);
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
@@ -82,9 +83,8 @@ static const char * const dove_dt_board_compat[] = {
 
 DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
 	.map_io		= dove_map_io,
-	.init_early	= dove_init_early,
-	.init_irq	= orion_dt_init_irq,
-	.init_time	= dove_timer_init,
+	.init_early	= dove_dt_init_early,
+	.init_time	= dove_dt_time_init,
 	.init_machine	= dove_dt_init,
 	.restart	= dove_restart,
 	.dt_compat	= dove_dt_board_compat,

arch/arm/mach-exynos/headsmp.S

@@ -13,8 +13,6 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	__CPUINIT
-
 /*
  * exynos4 specific entry point for secondary CPUs.  This provides
  * a "holding pen" into which all secondary cores are held until we're

arch/arm/mach-exynos/platsmp.c

@@ -75,7 +75,7 @@ static void __iomem *scu_base_addr(void)
 
 static DEFINE_SPINLOCK(boot_lock);
 
-static void __cpuinit exynos_secondary_init(unsigned int cpu)
+static void exynos_secondary_init(unsigned int cpu)
 {
 	/*
 	 * let the primary processor know we're out of the
@@ -90,7 +90,7 @@ static void __cpuinit exynos_secondary_init(unsigned int cpu)
 	spin_unlock(&boot_lock);
 }
 
-static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;
 	unsigned long phys_cpu = cpu_logical_map(cpu);

arch/arm/mach-highbank/platsmp.c

@@ -24,7 +24,7 @@
 
 extern void secondary_startup(void);
 
-static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	highbank_set_cpu_jump(cpu, secondary_startup);
 	arch_send_wakeup_ipi_mask(cpumask_of(cpu));

arch/arm/mach-imx/platsmp.c

@@ -53,7 +53,7 @@ void imx_scu_standby_enable(void)
 	writel_relaxed(val, scu_base);
 }
 
-static int __cpuinit imx_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int imx_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	imx_set_cpu_jump(cpu, v7_secondary_startup);
 	imx_enable_cpu(cpu, true);

arch/arm/mach-keystone/platsmp.c

@@ -21,7 +21,7 @@
 
 #include "keystone.h"
 
-static int __cpuinit keystone_smp_boot_secondary(unsigned int cpu,
+static int keystone_smp_boot_secondary(unsigned int cpu,
 						struct task_struct *idle)
 {
 	unsigned long start = virt_to_phys(&secondary_startup);

arch/arm/mach-kirkwood/Kconfig

@@ -2,67 +2,81 @@ if ARCH_KIRKWOOD
 
 menu "Marvell Kirkwood Implementations"
 
+config KIRKWOOD_LEGACY
+	bool
+
 config MACH_D2NET_V2
 	bool "LaCie d2 Network v2 NAS Board"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie d2 Network v2 NAS.
 
 config MACH_DOCKSTAR
 	bool "Seagate FreeAgent DockStar"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Seagate FreeAgent DockStar.
 
 config MACH_ESATA_SHEEVAPLUG
 	bool "Marvell eSATA SheevaPlug Reference Board"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell eSATA SheevaPlug Reference Board.
 
 config MACH_GURUPLUG
 	bool "Marvell GuruPlug Reference Board"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell GuruPlug Reference Board.
 
 config MACH_INETSPACE_V2
 	bool "LaCie Internet Space v2 NAS Board"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie Internet Space v2 NAS.
 
 config MACH_MV88F6281GTW_GE
 	bool "Marvell 88F6281 GTW GE Board"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell 88F6281 GTW GE Board.
 
 config MACH_NET2BIG_V2
 	bool "LaCie 2Big Network v2 NAS Board"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie 2Big Network v2 NAS.
 
 config MACH_NET5BIG_V2
 	bool "LaCie 5Big Network v2 NAS Board"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie 5Big Network v2 NAS.
 
 config MACH_NETSPACE_MAX_V2
 	bool "LaCie Network Space Max v2 NAS Board"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie Network Space Max v2 NAS.
 
 config MACH_NETSPACE_V2
 	bool "LaCie Network Space v2 NAS Board"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie Network Space v2 NAS.
 
 config MACH_OPENRD
+	select KIRKWOOD_LEGACY
         bool
 
 config MACH_OPENRD_BASE
@@ -88,30 +102,35 @@ config MACH_OPENRD_ULTIMATE
 
 config MACH_RD88F6192_NAS
 	bool "Marvell RD-88F6192-NAS Reference Board"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell RD-88F6192-NAS Reference Board.
 
 config MACH_RD88F6281
 	bool "Marvell RD-88F6281 Reference Board"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell RD-88F6281 Reference Board.
 
 config MACH_SHEEVAPLUG
 	bool "Marvell SheevaPlug Reference Board"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell SheevaPlug Reference Board.
 
 config MACH_T5325
 	bool "HP t5325 Thin Client"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  HP t5325 Thin Client.
 
 config MACH_TS219
 	bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
@@ -119,6 +138,7 @@ config MACH_TS219
 
 config MACH_TS41X
 	bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS"
+	select KIRKWOOD_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo
@@ -129,6 +149,8 @@ comment "Device tree entries"
 config ARCH_KIRKWOOD_DT
 	bool "Marvell Kirkwood Flattened Device Tree"
 	select KIRKWOOD_CLK
+	select ORION_IRQCHIP
+	select ORION_TIMER
 	select POWER_SUPPLY
 	select POWER_RESET
 	select POWER_RESET_GPIO
@@ -139,20 +161,6 @@ config ARCH_KIRKWOOD_DT
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Kirkwood using flattened device tree.
 
-config MACH_CLOUDBOX_DT
-	bool "LaCie CloudBox NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the LaCie
-	  CloudBox NAS, using Flattened Device Tree.
-
-config MACH_DB88F628X_BP_DT
-	bool "Marvell DB-88F628x-BP Development Board (Flattened Device Tree)"
-	help
-	  Say 'Y' here if you want your kernel to support the Marvell
-	  DB-88F6281-BP and DB-88F6282-BP Development Board (Flattened
-	  Device Tree).
-
 config MACH_DLINK_KIRKWOOD_DT
 	bool "D-Link Kirkwood-based NAS (Flattened Device Tree)"
 	select ARCH_KIRKWOOD_DT
@@ -161,163 +169,6 @@ config MACH_DLINK_KIRKWOOD_DT
 	  Kirkwood-based D-Link NASes such as DNS-320 & DNS-325,
 	  using Flattened Device Tree.
 
-config MACH_DOCKSTAR_DT
-	bool "Seagate FreeAgent Dockstar (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Seagate FreeAgent Dockstar (Flattened Device Tree).
-
-config MACH_DREAMPLUG_DT
-	bool "Marvell DreamPlug (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell DreamPlug (Flattened Device Tree).
-
-config MACH_GOFLEXNET_DT
-	bool "Seagate GoFlex Net (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Seagate GoFlex Net (Flattened Device Tree).
-
-config MACH_GURUPLUG_DT
-	bool "Marvell GuruPlug Reference Board (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell GuruPlug Reference Board (Flattened Device Tree).
-
-config MACH_IB62X0_DT
-	bool "RaidSonic IB-NAS6210, IB-NAS6220 (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  RaidSonic IB-NAS6210 & IB-NAS6220 devices, using
-	  Flattened Device Tree.
-
-config MACH_ICONNECT_DT
-	bool "Iomega Iconnect (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here to enable Iomega Iconnect support.
-
-config MACH_INETSPACE_V2_DT
-	bool "LaCie Internet Space v2 NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the LaCie
-	  Internet Space v2 NAS, using Flattened Device Tree.
-
-config MACH_IOMEGA_IX2_200_DT
-	bool "Iomega StorCenter ix2-200 (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Iomega StorCenter ix2-200 (Flattened Device Tree).
-
-config MACH_KM_KIRKWOOD_DT
-	bool "Keymile Kirkwood Reference Design (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Keymile Kirkwood Reference Desgin, using Flattened Device Tree.
-
-config MACH_LSXL_DT
-	bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	select POWER_RESET_RESTART
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using
-	  Flattened Device Tree.
-
-config MACH_MPLCEC4_DT
-	bool "MPL CEC4 (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  MPL CEC4 (Flattened Device Tree).
-
-config MACH_NETSPACE_LITE_V2_DT
-	bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the LaCie
-	  Network Space Lite v2 NAS, using Flattened Device Tree.
-
-config MACH_NETSPACE_MAX_V2_DT
-	bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the LaCie
-	  Network Space Max v2 NAS, using Flattened Device Tree.
-
-config MACH_NETSPACE_MINI_V2_DT
-	bool "LaCie Network Space Mini v2 NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the LaCie
-	  Network Space Mini v2 NAS using Flattened Device Tree.
-
-	  This board is embedded in a product named CloudBox, which
-	  provides automatic backup on a 100GB cloud storage. This
-	  should not confused with a more recent LaCie NAS also named
-	  CloudBox. For this last, the disk capacity is 1TB or above.
-
-config MACH_NETSPACE_V2_DT
-	bool "LaCie Network Space v2 NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the LaCie
-	  Network Space v2 NAS, using Flattened Device Tree.
-
-config MACH_OPENBLOCKS_A6_DT
-	bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Plat'Home OpenBlocks A6 (Flattened Device Tree).
-
-config MACH_READYNAS_DT
-	bool "NETGEAR ReadyNAS Duo v2 (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	select ARM_APPENDED_DTB
-	select ARM_ATAG_DTB_COMPAT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  NETGEAR ReadyNAS Duo v2 using Fattened Device Tree.
-
-config MACH_SHEEVAPLUG_DT
-	bool "Marvell (eSATA) SheevaPlug (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell (eSATA) SheevaPlug (Flattened Device Tree).
-
-config MACH_TOPKICK_DT
-	bool "USI Topkick (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  USI Topkick, using Flattened Device Tree
-
-config MACH_TS219_DT
-	bool "Device Tree for QNAP TS-11X, TS-21X NAS"
-	select ARCH_KIRKWOOD_DT
-	select ARM_APPENDED_DTB
-	select ARM_ATAG_DTB_COMPAT
-	select POWER_RESET_QNAP
-	help
-	  Say 'Y' here if you want your kernel to support the QNAP
-	  TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
-	  TS-219P+ Turbo NAS devices using Fattened Device Tree.
-	  There are two different Device Tree descriptions, depending
-	  on if the device is based on an if the board uses the MV6281
-	  or MV6282. If you have the wrong one, the buttons will not
-	  work.
-
 endmenu
 
 endif

arch/arm/mach-kirkwood/Makefile

@@ -1,5 +1,5 @@
-obj-y				+= common.o irq.o pcie.o mpp.o
-
+obj-y				+= common.o pcie.o
+obj-$(CONFIG_KIRKWOOD_LEGACY)	+= irq.o mpp.o
 obj-$(CONFIG_MACH_D2NET_V2)		+= d2net_v2-setup.o lacie_v2-common.o
 obj-$(CONFIG_MACH_DOCKSTAR)		+= dockstar-setup.o
 obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)	+= sheevaplug-setup.o
@@ -19,26 +19,4 @@ obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
 
 obj-$(CONFIG_ARCH_KIRKWOOD_DT)		+= board-dt.o
-obj-$(CONFIG_MACH_CLOUDBOX_DT)		+= board-ns2.o
-obj-$(CONFIG_MACH_DB88F628X_BP_DT)	+= board-db88f628x-bp.o
 obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT)	+= board-dnskw.o
-obj-$(CONFIG_MACH_DOCKSTAR_DT)		+= board-dockstar.o
-obj-$(CONFIG_MACH_DREAMPLUG_DT)		+= board-dreamplug.o
-obj-$(CONFIG_MACH_GOFLEXNET_DT)		+= board-goflexnet.o
-obj-$(CONFIG_MACH_GURUPLUG_DT)		+= board-guruplug.o
-obj-$(CONFIG_MACH_IB62X0_DT)		+= board-ib62x0.o
-obj-$(CONFIG_MACH_ICONNECT_DT)		+= board-iconnect.o
-obj-$(CONFIG_MACH_INETSPACE_V2_DT)	+= board-ns2.o
-obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT)	+= board-iomega_ix2_200.o
-obj-$(CONFIG_MACH_KM_KIRKWOOD_DT)	+= board-km_kirkwood.o
-obj-$(CONFIG_MACH_LSXL_DT)		+= board-lsxl.o
-obj-$(CONFIG_MACH_MPLCEC4_DT)		+= board-mplcec4.o
-obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT)	+= board-ns2.o
-obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT)	+= board-ns2.o
-obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT)	+= board-ns2.o
-obj-$(CONFIG_MACH_NETSPACE_V2_DT)	+= board-ns2.o
-obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT)	+= board-openblocks_a6.o
-obj-$(CONFIG_MACH_READYNAS_DT)		+= board-readynas.o
-obj-$(CONFIG_MACH_SHEEVAPLUG_DT)	+= board-sheevaplug.o
-obj-$(CONFIG_MACH_TOPKICK_DT)		+= board-usi_topkick.o
-obj-$(CONFIG_MACH_TS219_DT)		+= board-ts219.o tsx1x-common.o

arch/arm/mach-kirkwood/board-db88f628x-bp.c

@@ -1,24 +0,0 @@
-/*
- * Saeed Bishara <saeed@marvell.com>
- *
- * Marvell DB-88F628{1,2}-BP Development Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data db88f628x_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-void __init db88f628x_init(void)
-{
-	kirkwood_ge00_init(&db88f628x_ge00_data);
-}

arch/arm/mach-kirkwood/board-dnskw.c

@@ -14,14 +14,9 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
 #include "common.h"
 
-static struct mv643xx_eth_platform_data dnskw_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
 /* Register any GPIO for output and set the value */
 static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
 {
@@ -36,8 +31,6 @@ static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
 
 void __init dnskw_init(void)
 {
-	kirkwood_ge00_init(&dnskw_ge00_data);
-
 	/* Set NAS to turn back on after a power failure */
 	dnskw_gpio_register(37, "dnskw:power:recover", 1);
 }

arch/arm/mach-kirkwood/board-dockstar.c

@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-dockstar.c
- *
- * Seagate FreeAgent Dockstar Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Copied and modified for Seagate GoFlex Net support by
- * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
- * GoFlex kernel patches.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data dockstar_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init dockstar_dt_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&dockstar_ge00_data);
-}

arch/arm/mach-kirkwood/board-dreamplug.c

@@ -1,35 +0,0 @@
-/*
- * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
- *
- * arch/arm/mach-kirkwood/board-dreamplug.c
- *
- * Marvell DreamPlug Reference Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
-};
-
-void __init dreamplug_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&dreamplug_ge00_data);
-	kirkwood_ge01_init(&dreamplug_ge01_data);
-}

arch/arm/mach-kirkwood/board-dt.c

@@ -15,6 +15,9 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/dma-mapping.h>
+#include <linux/irqchip.h>
 #include <linux/kexec.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -49,10 +52,6 @@ static void __init kirkwood_legacy_clk_init(void)
 	orion_clkdev_add("1", "pcie",
 			 of_clk_get_from_provider(&clkspec));
 
-	clkspec.args[0] = CGC_BIT_SDIO;
-	orion_clkdev_add(NULL, "mvsdio",
-			 of_clk_get_from_provider(&clkspec));
-
 	/*
 	 * The ethernet interfaces forget the MAC address assigned by
 	 * u-boot if the clocks are turned off. Until proper DT support
@@ -60,19 +59,24 @@ static void __init kirkwood_legacy_clk_init(void)
 	 */
 	clkspec.args[0] = CGC_BIT_GE0;
 	clk = of_clk_get_from_provider(&clkspec);
-	orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk);
 	clk_prepare_enable(clk);
 
 	clkspec.args[0] = CGC_BIT_GE1;
 	clk = of_clk_get_from_provider(&clkspec);
-	orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk);
 	clk_prepare_enable(clk);
 }
 
-static void __init kirkwood_of_clk_init(void)
+static void __init kirkwood_dt_time_init(void)
 {
 	of_clk_init(NULL);
-	kirkwood_legacy_clk_init();
+	clocksource_of_init();
+}
+
+static void __init kirkwood_dt_init_early(void)
+{
+	mvebu_mbus_init("marvell,kirkwood-mbus",
+			BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
+			DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ);
 }
 
 static void __init kirkwood_dt_init(void)
@@ -93,8 +97,8 @@ static void __init kirkwood_dt_init(void)
 
 	kirkwood_cpufreq_init();
 
-	/* Setup root of clk tree */
-	kirkwood_of_clk_init();
+	/* Setup clocks for legacy devices */
+	kirkwood_legacy_clk_init();
 
 	kirkwood_cpuidle_init();
 
@@ -102,105 +106,22 @@ static void __init kirkwood_dt_init(void)
 	kexec_reinit = kirkwood_enable_pcie;
 #endif
 
-	if (of_machine_is_compatible("globalscale,dreamplug"))
-		dreamplug_init();
-
-	if (of_machine_is_compatible("globalscale,guruplug"))
-		guruplug_dt_init();
-
-	if (of_machine_is_compatible("globalscale,sheevaplug"))
-		sheevaplug_dt_init();
-
 	if (of_machine_is_compatible("dlink,dns-kirkwood"))
 		dnskw_init();
 
-	if (of_machine_is_compatible("iom,iconnect"))
-		iconnect_init();
-
-	if (of_machine_is_compatible("raidsonic,ib-nas62x0"))
-		ib62x0_init();
-
-	if (of_machine_is_compatible("qnap,ts219"))
-		qnap_dt_ts219_init();
-
-	if (of_machine_is_compatible("seagate,dockstar"))
-		dockstar_dt_init();
-
-	if (of_machine_is_compatible("seagate,goflexnet"))
-		goflexnet_init();
-
-	if (of_machine_is_compatible("buffalo,lsxl"))
-		lsxl_init();
-
-	if (of_machine_is_compatible("iom,ix2-200"))
-		iomega_ix2_200_init();
-
-	if (of_machine_is_compatible("keymile,km_kirkwood"))
-		km_kirkwood_init();
-
-	if (of_machine_is_compatible("lacie,cloudbox") ||
-	    of_machine_is_compatible("lacie,inetspace_v2") ||
-	    of_machine_is_compatible("lacie,netspace_lite_v2") ||
-	    of_machine_is_compatible("lacie,netspace_max_v2") ||
-	    of_machine_is_compatible("lacie,netspace_mini_v2") ||
-	    of_machine_is_compatible("lacie,netspace_v2"))
-		ns2_init();
-
-	if (of_machine_is_compatible("marvell,db-88f6281-bp") ||
-	    of_machine_is_compatible("marvell,db-88f6282-bp"))
-		db88f628x_init();
-
-	if (of_machine_is_compatible("mpl,cec4"))
-		mplcec4_init();
-
-	if (of_machine_is_compatible("netgear,readynas-duo-v2"))
-		netgear_readynas_init();
-
-	if (of_machine_is_compatible("plathome,openblocks-a6"))
-		openblocks_a6_init();
-
-	if (of_machine_is_compatible("usi,topkick"))
-		usi_topkick_init();
-
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char * const kirkwood_dt_board_compat[] = {
-	"globalscale,dreamplug",
-	"globalscale,guruplug",
-	"globalscale,sheevaplug",
-	"dlink,dns-320",
-	"dlink,dns-325",
-	"iom,iconnect",
-	"raidsonic,ib-nas62x0",
-	"qnap,ts219",
-	"seagate,dockstar",
-	"seagate,goflexnet",
-	"buffalo,lsxl",
-	"iom,ix2-200",
-	"keymile,km_kirkwood",
-	"lacie,cloudbox",
-	"lacie,inetspace_v2",
-	"lacie,netspace_lite_v2",
-	"lacie,netspace_max_v2",
-	"lacie,netspace_mini_v2",
-	"lacie,netspace_v2",
-	"marvell,db-88f6281-bp",
-	"marvell,db-88f6282-bp",
-	"mpl,cec4",
-	"netgear,readynas-duo-v2",
-	"plathome,openblocks-a6",
-	"usi,topkick",
-	"zyxel,nsa310",
+	"marvell,kirkwood",
 	NULL
 };
 
 DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
 	/* Maintainer: Jason Cooper <jason@lakedaemon.net> */
 	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= orion_dt_init_irq,
-	.init_time	= kirkwood_timer_init,
+	.init_early	= kirkwood_dt_init_early,
+	.init_time	= kirkwood_dt_time_init,
 	.init_machine	= kirkwood_dt_init,
 	.restart	= kirkwood_restart,
 	.dt_compat	= kirkwood_dt_board_compat,

arch/arm/mach-kirkwood/board-goflexnet.c

@@ -1,34 +0,0 @@
-/*
- * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
- *
- * arch/arm/mach-kirkwood/board-goflexnet.c
- *
- * Seagate GoFlext Net Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Copied and modified for Seagate GoFlex Net support by
- * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
- * GoFlex kernel patches.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init goflexnet_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&goflexnet_ge00_data);
-}

arch/arm/mach-kirkwood/board-guruplug.c

@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-guruplug.c
- *
- * Marvell Guruplug Reference Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data guruplug_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data guruplug_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
-};
-
-void __init guruplug_dt_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&guruplug_ge00_data);
-	kirkwood_ge01_init(&guruplug_ge01_data);
-}

arch/arm/mach-kirkwood/board-ib62x0.c

@@ -1,29 +0,0 @@
-/*
- * Copyright 2012 (C), Simon Baatz <gmbnomis@gmail.com>
- *
- * arch/arm/mach-kirkwood/board-ib62x0.c
- *
- * RaidSonic ICY BOX IB-NAS6210 & IB-NAS6220 init for drivers not
- * converted to flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-void __init ib62x0_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&ib62x0_ge00_data);
-}

arch/arm/mach-kirkwood/board-iconnect.c

@@ -1,24 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-iconnect.c
- *
- * Iomega i-connect Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data iconnect_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
-};
-
-void __init iconnect_init(void)
-{
-	kirkwood_ge00_init(&iconnect_ge00_data);
-}

arch/arm/mach-kirkwood/board-iomega_ix2_200.c

@@ -1,34 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-iomega_ix2_200.c
- *
- * Iomega StorCenter ix2-200
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
-	.phy_addr       = MV643XX_ETH_PHY_NONE,
-	.speed          = SPEED_1000,
-	.duplex         = DUPLEX_FULL,
-};
-
-static struct mv643xx_eth_platform_data iomega_ix2_200_ge01_data = {
-        .phy_addr       = MV643XX_ETH_PHY_ADDR(11),
-};
-
-void __init iomega_ix2_200_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&iomega_ix2_200_ge00_data);
-	kirkwood_ge01_init(&iomega_ix2_200_ge01_data);
-}

arch/arm/mach-kirkwood/board-km_kirkwood.c

@@ -1,44 +0,0 @@
-/*
- * Copyright 2012 2012 KEYMILE AG, CH-3097 Bern
- * Valentin Longchamp <valentin.longchamp@keymile.com>
- *
- * arch/arm/mach-kirkwood/board-km_kirkwood.c
- *
- * Keymile km_kirkwood Reference Desing Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/clk.h>
-#include <linux/clk-private.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init km_kirkwood_init(void)
-{
-	struct clk *sata_clk;
-	/*
-	 * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing
-	 * SATA bits (14-15) of the Clock Gating Control Register. Since these
-	 * devices are also not present in this variant, their clocks get
-	 * disabled because unused when clk_disable_unused() gets called.
-	 * That's why we change the flags to these clocks to CLK_IGNORE_UNUSED
-	 */
-	sata_clk = clk_get_sys("sata_mv.0", "0");
-	if (!IS_ERR(sata_clk))
-		sata_clk->flags |= CLK_IGNORE_UNUSED;
-	sata_clk = clk_get_sys("sata_mv.0", "1");
-	if (!IS_ERR(sata_clk))
-		sata_clk->flags |= CLK_IGNORE_UNUSED;
-
-	kirkwood_ge00_init(&km_kirkwood_ge00_data);
-}

arch/arm/mach-kirkwood/board-lsxl.c

@@ -1,36 +0,0 @@
-/*
- * Copyright 2012 (C), Michael Walle <michael@walle.cc>
- *
- * arch/arm/mach-kirkwood/board-lsxl.c
- *
- * Buffalo Linkstation LS-XHL and LS-CHLv2 init for drivers not
- * converted to flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data lsxl_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data lsxl_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-void __init lsxl_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-
-	kirkwood_ge00_init(&lsxl_ge00_data);
-	kirkwood_ge01_init(&lsxl_ge01_data);
-}

arch/arm/mach-kirkwood/board-mplcec4.c

@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2012 MPL AG, Switzerland
- * Stefan Peter <s.peter@mpl.ch>
- *
- * arch/arm/mach-kirkwood/board-mplcec4.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data mplcec4_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
-};
-
-static struct mv643xx_eth_platform_data mplcec4_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(2),
-};
-
-void __init mplcec4_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&mplcec4_ge00_data);
-	kirkwood_ge01_init(&mplcec4_ge01_data);
-}
-
-
-

arch/arm/mach-kirkwood/board-ns2.c

@@ -1,35 +0,0 @@
-/*
- * Copyright 2012 (C), Simon Guinot <simon.guinot@sequanux.org>
- *
- * arch/arm/mach-kirkwood/board-ns2.c
- *
- * LaCie Network Space v2 board (and parents) initialization for drivers
- * not converted to flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/of.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data ns2_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-void __init ns2_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	if (of_machine_is_compatible("lacie,cloudbox") ||
-	    of_machine_is_compatible("lacie,netspace_lite_v2") ||
-	    of_machine_is_compatible("lacie,netspace_mini_v2"))
-		ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
-	kirkwood_ge00_init(&ns2_ge00_data);
-}

arch/arm/mach-kirkwood/board-openblocks_a6.c

@@ -1,26 +0,0 @@
-/*
- * Copyright 2012 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * arch/arm/mach-kirkwood/board-openblocks_a6.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data openblocks_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init openblocks_a6_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&openblocks_ge00_data);
-}

arch/arm/mach-kirkwood/board-readynas.c

@@ -1,27 +0,0 @@
-/*
- * NETGEAR ReadyNAS Duo v2 Board setup for drivers not already
- * converted to DT.
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data netgear_readynas_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init netgear_readynas_init(void)
-{
-	kirkwood_ge00_init(&netgear_readynas_ge00_data);
-}

arch/arm/mach-kirkwood/board-sheevaplug.c

@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-sheevaplug.c
- *
- * Marvell Sheevaplug Reference Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init sheevaplug_dt_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&sheevaplug_ge00_data);
-}

arch/arm/mach-kirkwood/board-ts219.c

@@ -1,40 +0,0 @@
-/*
- *
- * QNAP TS-11x/TS-21x Turbo NAS Board Setup via DT
- *
- * Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch>
- *
- * Based on the board file ts219-setup.c:
- *
- * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
- * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-void __init qnap_dt_ts219_init(void)
-{
-	u32 dev, rev;
-
-	kirkwood_pcie_id(&dev, &rev);
-	if (dev == MV88F6282_DEV_ID)
-		qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
-
-	kirkwood_ge00_init(&qnap_ts219_ge00_data);
-}

arch/arm/mach-kirkwood/board-usi_topkick.c

@@ -1,29 +0,0 @@
-/*
- * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
- *
- * arch/arm/mach-kirkwood/board-usi_topkick.c
- *
- * USI Topkick Init for drivers not converted to flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data topkick_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init usi_topkick_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&topkick_ge00_data);
-}

arch/arm/mach-kirkwood/common.h

@@ -59,121 +59,12 @@ void kirkwood_restart(enum reboot_mode, const char *);
 void kirkwood_clk_init(void);
 
 /* board init functions for boards not fully converted to fdt */
-#ifdef CONFIG_MACH_DREAMPLUG_DT
-void dreamplug_init(void);
-#else
-static inline void dreamplug_init(void) {};
-#endif
-#ifdef CONFIG_MACH_GURUPLUG_DT
-void guruplug_dt_init(void);
-#else
-static inline void guruplug_dt_init(void) {};
-#endif
-#ifdef CONFIG_MACH_SHEEVAPLUG_DT
-void sheevaplug_dt_init(void);
-#else
-static inline void sheevaplug_dt_init(void) {};
-#endif
-#ifdef CONFIG_MACH_TS219_DT
-void qnap_dt_ts219_init(void);
-#else
-static inline void qnap_dt_ts219_init(void) {};
-#endif
-
 #ifdef CONFIG_MACH_DLINK_KIRKWOOD_DT
 void dnskw_init(void);
 #else
 static inline void dnskw_init(void) {};
 #endif
 
-#ifdef CONFIG_MACH_ICONNECT_DT
-void iconnect_init(void);
-#else
-static inline void iconnect_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_IB62X0_DT
-void ib62x0_init(void);
-#else
-static inline void ib62x0_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_DOCKSTAR_DT
-void dockstar_dt_init(void);
-#else
-static inline void dockstar_dt_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_GOFLEXNET_DT
-void goflexnet_init(void);
-#else
-static inline void goflexnet_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_LSXL_DT
-void lsxl_init(void);
-#else
-static inline void lsxl_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_IOMEGA_IX2_200_DT
-void iomega_ix2_200_init(void);
-#else
-static inline void iomega_ix2_200_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_KM_KIRKWOOD_DT
-void km_kirkwood_init(void);
-#else
-static inline void km_kirkwood_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_DB88F628X_BP_DT
-void db88f628x_init(void);
-#else
-static inline void db88f628x_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_MPLCEC4_DT
-void mplcec4_init(void);
-#else
-static inline void mplcec4_init(void) {};
-#endif
-
-#if defined(CONFIG_MACH_INETSPACE_V2_DT) || \
-	defined(CONFIG_MACH_NETSPACE_V2_DT) || \
-	defined(CONFIG_MACH_NETSPACE_MAX_V2_DT) || \
-	defined(CONFIG_MACH_NETSPACE_LITE_V2_DT) || \
-	defined(CONFIG_MACH_NETSPACE_MINI_V2_DT)
-void ns2_init(void);
-#else
-static inline void ns2_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_OPENBLOCKS_A6_DT
-void openblocks_a6_init(void);
-#else
-static inline void openblocks_a6_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_READYNAS_DT
-void netgear_readynas_init(void);
-#else
-static inline void netgear_readynas_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_TOPKICK_DT
-void usi_topkick_init(void);
-#else
-static inline void usi_topkick_init(void) {};
-#endif
-
-#ifdef CONFIG_MACH_CLOUDBOX_DT
-void cloudbox_init(void);
-#else
-static inline void cloudbox_init(void) {};
-#endif
-
 /* early init functions not converted to fdt yet */
 char *kirkwood_id(void);
 void kirkwood_l2_init(void);

arch/arm/mach-msm/headsmp.S

@@ -11,8 +11,6 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	__CPUINIT
-
 /*
  * MSM specific entry point for secondary CPUs.  This provides
  * a "holding pen" into which all secondary cores are held until we're

arch/arm/mach-msm/platsmp.c

@@ -38,7 +38,7 @@ static inline int get_core_count(void)
 	return ((read_cpuid_id() >> 4) & 3) + 1;
 }
 
-static void __cpuinit msm_secondary_init(unsigned int cpu)
+static void msm_secondary_init(unsigned int cpu)
 {
 	/*
 	 * let the primary processor know we're out of the
@@ -54,7 +54,7 @@ static void __cpuinit msm_secondary_init(unsigned int cpu)
 	spin_unlock(&boot_lock);
 }
 
-static __cpuinit void prepare_cold_cpu(unsigned int cpu)
+static void prepare_cold_cpu(unsigned int cpu)
 {
 	int ret;
 	ret = scm_set_boot_addr(virt_to_phys(msm_secondary_startup),
@@ -73,7 +73,7 @@ static __cpuinit void prepare_cold_cpu(unsigned int cpu)
 				  "address\n");
 }
 
-static int __cpuinit msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;
 	static int cold_boot_done;

arch/arm/mach-msm/timer.c

@@ -139,7 +139,7 @@ static struct clocksource msm_clocksource = {
 };
 
 #ifdef CONFIG_LOCAL_TIMERS
-static int __cpuinit msm_local_timer_setup(struct clock_event_device *evt)
+static int msm_local_timer_setup(struct clock_event_device *evt)
 {
 	/* Use existing clock_event for cpu 0 */
 	if (!smp_processor_id())
@@ -164,7 +164,7 @@ static void msm_local_timer_stop(struct clock_event_device *evt)
 	disable_percpu_irq(evt->irq);
 }
 
-static struct local_timer_ops msm_local_timer_ops __cpuinitdata = {
+static struct local_timer_ops msm_local_timer_ops = {
 	.setup	= msm_local_timer_setup,
 	.stop	= msm_local_timer_stop,
 };

arch/arm/mach-mvebu/coherency.c

@@ -28,7 +28,7 @@
 #include <asm/cacheflush.h>
 #include "armada-370-xp.h"
 
-unsigned long __cpuinitdata coherency_phys_base;
+unsigned long coherency_phys_base;
 static void __iomem *coherency_base;
 static void __iomem *coherency_cpu_base;
 

arch/arm/mach-mvebu/headsmp.S

@@ -21,8 +21,6 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	__CPUINIT
-
 /*
  * Armada XP specific entry point for secondary CPUs.
  * We add the CPU to the coherency fabric and then jump to secondary

arch/arm/mach-mvebu/platsmp.c

@@ -71,13 +71,12 @@ void __init set_secondary_cpus_clock(void)
 	}
 }
 
-static void __cpuinit armada_xp_secondary_init(unsigned int cpu)
+static void armada_xp_secondary_init(unsigned int cpu)
 {
 	armada_xp_mpic_smp_cpu_init();
 }
 
-static int __cpuinit armada_xp_boot_secondary(unsigned int cpu,
-					      struct task_struct *idle)
+static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	pr_info("Booting CPU %d\n", cpu);
 

arch/arm/mach-omap2/omap-headsmp.S

@@ -20,8 +20,6 @@
 
 #include "omap44xx.h"
 
-	__CPUINIT
-
 /* Physical address needed since MMU not enabled yet on secondary core */
 #define AUX_CORE_BOOT0_PA			0x48281800
 

arch/arm/mach-omap2/omap-mpuss-lowpower.c

@@ -291,7 +291,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
  * @cpu : CPU ID
  * @power_state: CPU low power state.
  */
-int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
+int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
 {
 	struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu);
 	unsigned int cpu_state = 0;

arch/arm/mach-omap2/omap-smp.c

@@ -51,7 +51,7 @@ void __iomem *omap4_get_scu_base(void)
 	return scu_base;
 }
 
-static void __cpuinit omap4_secondary_init(unsigned int cpu)
+static void omap4_secondary_init(unsigned int cpu)
 {
 	/*
 	 * Configure ACTRL and enable NS SMP bit access on CPU1 on HS device.
@@ -72,7 +72,7 @@ static void __cpuinit omap4_secondary_init(unsigned int cpu)
 	spin_unlock(&boot_lock);
 }
 
-static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	static struct clockdomain *cpu1_clkdm;
 	static bool booted;

arch/arm/mach-omap2/omap-wakeupgen.c

@@ -323,8 +323,8 @@ static void irq_save_secure_context(void)
 #endif
 
 #ifdef CONFIG_HOTPLUG_CPU
-static int __cpuinit irq_cpu_hotplug_notify(struct notifier_block *self,
-					 unsigned long action, void *hcpu)
+static int irq_cpu_hotplug_notify(struct notifier_block *self,
+				  unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (unsigned int)hcpu;
 

arch/arm/mach-orion5x/edmini_v2-setup.c

@@ -23,8 +23,8 @@
 #include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/irq.h>
+#include <linux/mbus.h>
 #include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
 #include <linux/leds.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
@@ -95,14 +95,6 @@ static struct platform_device edmini_v2_nor_flash = {
 	.resource		= &edmini_v2_nor_flash_resource,
 };
 
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data edmini_v2_eth_data = {
-	.phy_addr	= 8,
-};
-
 /*****************************************************************************
  * RTC 5C372a on I2C bus
  ****************************************************************************/
@@ -152,7 +144,6 @@ void __init edmini_v2_init(void)
 	 * Configure peripherals.
 	 */
 	orion5x_ehci0_init();
-	orion5x_eth_init(&edmini_v2_eth_data);
 
 	mvebu_mbus_add_window("devbus-boot", EDMINI_V2_NOR_BOOT_BASE,
 			      EDMINI_V2_NOR_BOOT_SIZE);

arch/arm/mach-prima2/headsmp.S

@@ -9,8 +9,6 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	__CPUINIT
-
 /*
  * SIRFSOC specific entry point for secondary CPUs.  This provides
  * a "holding pen" into which all secondary cores are held until we're

arch/arm/mach-prima2/platsmp.c

@@ -44,7 +44,7 @@ void __init sirfsoc_map_scu(void)
 	scu_base = (void __iomem *)SIRFSOC_VA(base);
 }
 
-static void __cpuinit sirfsoc_secondary_init(unsigned int cpu)
+static void sirfsoc_secondary_init(unsigned int cpu)
 {
 	/*
 	 * let the primary processor know we're out of the
@@ -65,7 +65,7 @@ static struct of_device_id rsc_ids[]  = {
 	{},
 };
 
-static int __cpuinit sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;
 	struct device_node *np;

arch/arm/mach-s3c24xx/Kconfig

@@ -208,7 +208,7 @@ config S3C24XX_GPIO_EXTRA128
 
 config S3C24XX_PLL
 	bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
-	depends on ARM_S3C24XX
+	depends on ARM_S3C24XX_CPUFREQ
 	help
 	  Compile in support for changing the PLL frequency from the
 	  S3C24XX series CPUfreq driver. The PLL takes time to settle

arch/arm/mach-shmobile/headsmp-scu.S

@@ -23,7 +23,6 @@
 #include <linux/init.h>
 #include <asm/memory.h>
 
-	__CPUINIT
 /*
  * Boot code for secondary CPUs.
  *

arch/arm/mach-shmobile/headsmp.S

@@ -14,8 +14,6 @@
 #include <linux/init.h>
 #include <asm/memory.h>
 
-	__CPUINIT
-
 ENTRY(shmobile_invalidate_start)
 	bl	v7_invalidate_l1
 	b	secondary_startup

arch/arm/mach-shmobile/smp-emev2.c

@@ -30,7 +30,7 @@
 
 #define EMEV2_SCU_BASE 0x1e000000
 
-static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int emev2_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	arch_send_wakeup_ipi_mask(cpumask_of(cpu_logical_map(cpu)));
 	return 0;

arch/arm/mach-shmobile/smp-r8a7779.c

@@ -81,7 +81,7 @@ static int r8a7779_platform_cpu_kill(unsigned int cpu)
 	return ret ? ret : 1;
 }
 
-static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	struct r8a7779_pm_ch *ch = NULL;
 	int ret = -EIO;

arch/arm/mach-shmobile/smp-sh73a0.c

@@ -48,7 +48,7 @@ void __init sh73a0_register_twd(void)
 }
 #endif
 
-static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	cpu = cpu_logical_map(cpu);
 

arch/arm/mach-socfpga/headsmp.S

@@ -10,7 +10,6 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	__CPUINIT
 	.arch	armv7-a
 
 ENTRY(secondary_trampoline)

arch/arm/mach-socfpga/platsmp.c

@@ -29,7 +29,7 @@
 
 #include "core.h"
 
-static int __cpuinit socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
 

arch/arm/mach-spear/generic.h

@@ -37,7 +37,7 @@ void __init spear13xx_l2x0_init(void);
 void spear_restart(enum reboot_mode, const char *);
 
 void spear13xx_secondary_startup(void);
-void __cpuinit spear13xx_cpu_die(unsigned int cpu);
+void spear13xx_cpu_die(unsigned int cpu);
 
 extern struct smp_operations spear13xx_smp_ops;
 

arch/arm/mach-spear/platsmp.c

@@ -24,7 +24,7 @@ static DEFINE_SPINLOCK(boot_lock);
 
 static void __iomem *scu_base = IOMEM(VA_SCU_BASE);
 
-static void __cpuinit spear13xx_secondary_init(unsigned int cpu)
+static void spear13xx_secondary_init(unsigned int cpu)
 {
 	/*
 	 * let the primary processor know we're out of the
@@ -40,7 +40,7 @@ static void __cpuinit spear13xx_secondary_init(unsigned int cpu)
 	spin_unlock(&boot_lock);
 }
 
-static int __cpuinit spear13xx_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int spear13xx_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;