Merge branch 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into perf/urgent

Documentation/flexible-arrays.txt

@@ -66,10 +66,10 @@ trick is to ensure that any needed memory allocations are done before
 entering atomic context, using:
 
     int flex_array_prealloc(struct flex_array *array, unsigned int start,
-			    unsigned int end, gfp_t flags);
+			    unsigned int nr_elements, gfp_t flags);
 
 This function will ensure that memory for the elements indexed in the range
-defined by start and end has been allocated.  Thereafter, a
+defined by start and nr_elements has been allocated.  Thereafter, a
 flex_array_put() call on an element in that range is guaranteed not to
 block.
 

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 39
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

arch/arm/configs/at91x40_defconfig

@@ -0,0 +1,48 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_EMBEDDED=y
+# CONFIG_HOTPLUG is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_MMU is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91X40=y
+CONFIG_MACH_AT91EB01=y
+CONFIG_AT91_EARLY_USART0=y
+CONFIG_CPU_ARM7TDMI=y
+CONFIG_SET_MEM_PARAM=y
+CONFIG_DRAM_BASE=0x01000000
+CONFIG_DRAM_SIZE=0x00400000
+CONFIG_FLASH_MEM_BASE=0x01400000
+CONFIG_PROCESSOR_ID=0x14000040
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_BINFMT_FLAT=y
+# CONFIG_SUSPEND is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+CONFIG_BLK_DEV_RAM=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_ENABLE_MUST_CHECK is not set

arch/arm/mach-at91/Kconfig

@@ -83,6 +83,7 @@ config ARCH_AT91CAP9
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
 	select HAVE_FB_ATMEL
+	select HAVE_NET_MACB
 
 config ARCH_AT572D940HF
 	bool "AT572D940HF"

arch/arm/mach-at91/board-eb01.c

@@ -30,6 +30,11 @@
 #include <mach/board.h>
 #include "generic.h"
 
+static void __init at91eb01_init_irq(void)
+{
+	at91x40_init_interrupts(NULL);
+}
+
 static void __init at91eb01_map_io(void)
 {
 	at91x40_initialize(40000000);
@@ -38,7 +43,7 @@ static void __init at91eb01_map_io(void)
 MACHINE_START(AT91EB01, "Atmel AT91 EB01")
 	/* Maintainer: Greg Ungerer <gerg@snapgear.com> */
 	.timer		= &at91x40_timer,
-	.init_irq	= at91x40_init_interrupts,
+	.init_irq	= at91eb01_init_irq,
 	.map_io		= at91eb01_map_io,
 MACHINE_END
 

arch/arm/mach-at91/include/mach/cpu.h

@@ -27,6 +27,7 @@
 #define ARCH_ID_AT91SAM9G45	0x819b05a0
 #define ARCH_ID_AT91SAM9G45MRL	0x819b05a2	/* aka 9G45-ES2 & non ES lots */
 #define ARCH_ID_AT91SAM9G45ES	0x819b05a1	/* 9G45-ES (Engineering Sample) */
+#define ARCH_ID_AT91SAM9X5	0x819a05a0
 #define ARCH_ID_AT91CAP9	0x039A03A0
 
 #define ARCH_ID_AT91SAM9XE128	0x329973a0
@@ -55,6 +56,12 @@ static inline unsigned long at91_cpu_fully_identify(void)
 #define ARCH_EXID_AT91SAM9G46	0x00000003
 #define ARCH_EXID_AT91SAM9G45	0x00000004
 
+#define ARCH_EXID_AT91SAM9G15	0x00000000
+#define ARCH_EXID_AT91SAM9G35	0x00000001
+#define ARCH_EXID_AT91SAM9X35	0x00000002
+#define ARCH_EXID_AT91SAM9G25	0x00000003
+#define ARCH_EXID_AT91SAM9X25	0x00000004
+
 static inline unsigned long at91_exid_identify(void)
 {
 	return at91_sys_read(AT91_DBGU_EXID);
@@ -143,6 +150,27 @@ static inline unsigned long at91cap9_rev_identify(void)
 #define cpu_is_at91sam9m11()	(0)
 #endif
 
+#ifdef CONFIG_ARCH_AT91SAM9X5
+#define cpu_is_at91sam9x5()	(at91_cpu_identify() == ARCH_ID_AT91SAM9X5)
+#define cpu_is_at91sam9g15()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9G15))
+#define cpu_is_at91sam9g35()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9G35))
+#define cpu_is_at91sam9x35()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9X35))
+#define cpu_is_at91sam9g25()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9G25))
+#define cpu_is_at91sam9x25()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9X25))
+#else
+#define cpu_is_at91sam9x5()	(0)
+#define cpu_is_at91sam9g15()	(0)
+#define cpu_is_at91sam9g35()	(0)
+#define cpu_is_at91sam9x35()	(0)
+#define cpu_is_at91sam9g25()	(0)
+#define cpu_is_at91sam9x25()	(0)
+#endif
+
 #ifdef CONFIG_ARCH_AT91CAP9
 #define cpu_is_at91cap9()	(at91_cpu_identify() == ARCH_ID_AT91CAP9)
 #define cpu_is_at91cap9_revB()	(at91cap9_rev_identify() == ARCH_REVISION_CAP9_B)

arch/x86/kernel/cpu/amd.c

@@ -698,7 +698,7 @@ cpu_dev_register(amd_cpu_dev);
  */
 
 const int amd_erratum_400[] =
-	AMD_OSVW_ERRATUM(1, AMD_MODEL_RANGE(0xf, 0x41, 0x2, 0xff, 0xf),
+	AMD_OSVW_ERRATUM(1, AMD_MODEL_RANGE(0x0f, 0x4, 0x2, 0xff, 0xf),
 			    AMD_MODEL_RANGE(0x10, 0x2, 0x1, 0xff, 0xf));
 EXPORT_SYMBOL_GPL(amd_erratum_400);
 

arch/x86/kernel/reboot_32.S

@@ -21,26 +21,26 @@ r_base = .
 	/* Get our own relocated address */
 	call	1f
 1:	popl	%ebx
-	subl	$1b, %ebx
+	subl	$(1b - r_base), %ebx
 
 	/* Compute the equivalent real-mode segment */
 	movl	%ebx, %ecx
 	shrl	$4, %ecx
 	
 	/* Patch post-real-mode segment jump */
-	movw	dispatch_table(%ebx,%eax,2),%ax
-	movw	%ax, 101f(%ebx)
-	movw	%cx, 102f(%ebx)
+	movw	(dispatch_table - r_base)(%ebx,%eax,2),%ax
+	movw	%ax, (101f - r_base)(%ebx)
+	movw	%cx, (102f - r_base)(%ebx)
 
 	/* Set up the IDT for real mode. */
-	lidtl	machine_real_restart_idt(%ebx)
+	lidtl	(machine_real_restart_idt - r_base)(%ebx)
 
 	/*
 	 * Set up a GDT from which we can load segment descriptors for real
 	 * mode.  The GDT is not used in real mode; it is just needed here to
 	 * prepare the descriptors.
 	 */
-	lgdtl	machine_real_restart_gdt(%ebx)
+	lgdtl	(machine_real_restart_gdt - r_base)(%ebx)
 
 	/*
 	 * Load the data segment registers with 16-bit compatible values

arch/x86/mm/numa_64.c

@@ -306,7 +306,7 @@ int __init numa_cleanup_meminfo(struct numa_meminfo *mi)
 		bi->end = min(bi->end, high);
 
 		/* and there's no empty block */
-		if (bi->start == bi->end) {
+		if (bi->start >= bi->end) {
 			numa_remove_memblk_from(i--, mi);
 			continue;
 		}

arch/x86/xen/mmu.c

@@ -1463,6 +1463,119 @@ static int xen_pgd_alloc(struct mm_struct *mm)
 	return ret;
 }
 
+#ifdef CONFIG_X86_64
+static __initdata u64 __last_pgt_set_rw = 0;
+static __initdata u64 __pgt_buf_start = 0;
+static __initdata u64 __pgt_buf_end = 0;
+static __initdata u64 __pgt_buf_top = 0;
+/*
+ * As a consequence of the commit:
+ * 
+ * commit 4b239f458c229de044d6905c2b0f9fe16ed9e01e
+ * Author: Yinghai Lu <yinghai@kernel.org>
+ * Date:   Fri Dec 17 16:58:28 2010 -0800
+ * 
+ *     x86-64, mm: Put early page table high
+ * 
+ * at some point init_memory_mapping is going to reach the pagetable pages
+ * area and map those pages too (mapping them as normal memory that falls
+ * in the range of addresses passed to init_memory_mapping as argument).
+ * Some of those pages are already pagetable pages (they are in the range
+ * pgt_buf_start-pgt_buf_end) therefore they are going to be mapped RO and
+ * everything is fine.
+ * Some of these pages are not pagetable pages yet (they fall in the range
+ * pgt_buf_end-pgt_buf_top; for example the page at pgt_buf_end) so they
+ * are going to be mapped RW.  When these pages become pagetable pages and
+ * are hooked into the pagetable, xen will find that the guest has already
+ * a RW mapping of them somewhere and fail the operation.
+ * The reason Xen requires pagetables to be RO is that the hypervisor needs
+ * to verify that the pagetables are valid before using them. The validation
+ * operations are called "pinning".
+ * 
+ * In order to fix the issue we mark all the pages in the entire range
+ * pgt_buf_start-pgt_buf_top as RO, however when the pagetable allocation
+ * is completed only the range pgt_buf_start-pgt_buf_end is reserved by
+ * init_memory_mapping. Hence the kernel is going to crash as soon as one
+ * of the pages in the range pgt_buf_end-pgt_buf_top is reused (b/c those
+ * ranges are RO).
+ * 
+ * For this reason, 'mark_rw_past_pgt' is introduced which is called _after_
+ * the init_memory_mapping has completed (in a perfect world we would
+ * call this function from init_memory_mapping, but lets ignore that).
+ * 
+ * Because we are called _after_ init_memory_mapping the pgt_buf_[start,
+ * end,top] have all changed to new values (b/c init_memory_mapping
+ * is called and setting up another new page-table). Hence, the first time
+ * we enter this function, we save away the pgt_buf_start value and update
+ * the pgt_buf_[end,top].
+ * 
+ * When we detect that the "old" pgt_buf_start through pgt_buf_end
+ * PFNs have been reserved (so memblock_x86_reserve_range has been called),
+ * we immediately set out to RW the "old" pgt_buf_end through pgt_buf_top.
+ * 
+ * And then we update those "old" pgt_buf_[end|top] with the new ones
+ * so that we can redo this on the next pagetable.
+ */
+static __init void mark_rw_past_pgt(void) {
+
+	if (pgt_buf_end > pgt_buf_start) {
+		u64 addr, size;
+
+		/* Save it away. */
+		if (!__pgt_buf_start) {
+			__pgt_buf_start = pgt_buf_start;
+			__pgt_buf_end = pgt_buf_end;
+			__pgt_buf_top = pgt_buf_top;
+			return;
+		}
+		/* If we get the range that starts at __pgt_buf_end that means
+		 * the range is reserved, and that in 'init_memory_mapping'
+		 * the 'memblock_x86_reserve_range' has been called with the
+		 * outdated __pgt_buf_start, __pgt_buf_end (the "new"
+		 * pgt_buf_[start|end|top] refer now to a new pagetable.
+		 * Note: we are called _after_ the pgt_buf_[..] have been
+		 * updated.*/
+
+		addr = memblock_x86_find_in_range_size(PFN_PHYS(__pgt_buf_start),
+						       &size, PAGE_SIZE);
+
+		/* Still not reserved, meaning 'memblock_x86_reserve_range'
+		 * hasn't been called yet. Update the _end and _top.*/
+		if (addr == PFN_PHYS(__pgt_buf_start)) {
+			__pgt_buf_end = pgt_buf_end;
+			__pgt_buf_top = pgt_buf_top;
+			return;
+		}
+
+		/* OK, the area is reserved, meaning it is time for us to
+		 * set RW for the old end->top PFNs. */
+
+		/* ..unless we had already done this. */
+		if (__pgt_buf_end == __last_pgt_set_rw)
+			return;
+
+		addr = PFN_PHYS(__pgt_buf_end);
+		
+		/* set as RW the rest */
+		printk(KERN_DEBUG "xen: setting RW the range %llx - %llx\n",
+			PFN_PHYS(__pgt_buf_end), PFN_PHYS(__pgt_buf_top));
+		
+		while (addr < PFN_PHYS(__pgt_buf_top)) {
+			make_lowmem_page_readwrite(__va(addr));
+			addr += PAGE_SIZE;
+		}
+		/* And update everything so that we are ready for the next
+		 * pagetable (the one created for regions past 4GB) */
+		__last_pgt_set_rw = __pgt_buf_end;
+		__pgt_buf_start = pgt_buf_start;
+		__pgt_buf_end = pgt_buf_end;
+		__pgt_buf_top = pgt_buf_top;
+	}
+	return;
+}
+#else
+static __init void mark_rw_past_pgt(void) { }
+#endif
 static void xen_pgd_free(struct mm_struct *mm, pgd_t *pgd)
 {
 #ifdef CONFIG_X86_64
@@ -1488,6 +1601,14 @@ static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte)
 {
 	unsigned long pfn = pte_pfn(pte);
 
+	/*
+	 * A bit of optimization. We do not need to call the workaround
+	 * when xen_set_pte_init is called with a PTE with 0 as PFN.
+	 * That is b/c the pagetable at that point are just being populated
+	 * with empty values and we can save some cycles by not calling
+	 * the 'memblock' code.*/
+	if (pfn)
+		mark_rw_past_pgt();
 	/*
 	 * If the new pfn is within the range of the newly allocated
 	 * kernel pagetable, and it isn't being mapped into an
@@ -1495,7 +1616,7 @@ static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte)
 	 * it is RO.
 	 */
 	if (((!is_early_ioremap_ptep(ptep) &&
-			pfn >= pgt_buf_start && pfn < pgt_buf_end)) ||
+			pfn >= pgt_buf_start && pfn < pgt_buf_top)) ||
 			(is_early_ioremap_ptep(ptep) && pfn != (pgt_buf_end - 1)))
 		pte = pte_wrprotect(pte);
 
@@ -1997,6 +2118,8 @@ __init void xen_ident_map_ISA(void)
 
 static __init void xen_post_allocator_init(void)
 {
+	mark_rw_past_pgt();
+
 #ifdef CONFIG_XEN_DEBUG
 	pv_mmu_ops.make_pte = PV_CALLEE_SAVE(xen_make_pte_debug);
 #endif

drivers/block/rbd.c

@@ -777,9 +777,9 @@ static int rbd_do_request(struct request *rq,
 				      ops,
 				      false,
 				      GFP_NOIO, pages, bio);
-	if (IS_ERR(req)) {
+	if (!req) {
 		up_read(&header->snap_rwsem);
-		ret = PTR_ERR(req);
+		ret = -ENOMEM;
 		goto done_pages;
 	}
 

drivers/firewire/ohci.c

@@ -2199,7 +2199,6 @@ static int ohci_set_config_rom(struct fw_card *card,
 {
 	struct fw_ohci *ohci;
 	unsigned long flags;
-	int ret = -EBUSY;
 	__be32 *next_config_rom;
 	dma_addr_t uninitialized_var(next_config_rom_bus);
 
@@ -2240,22 +2239,37 @@ static int ohci_set_config_rom(struct fw_card *card,
 
 	spin_lock_irqsave(&ohci->lock, flags);
 
+	/*
+	 * If there is not an already pending config_rom update,
+	 * push our new allocation into the ohci->next_config_rom
+	 * and then mark the local variable as null so that we
+	 * won't deallocate the new buffer.
+	 *
+	 * OTOH, if there is a pending config_rom update, just
+	 * use that buffer with the new config_rom data, and
+	 * let this routine free the unused DMA allocation.
+	 */
+
 	if (ohci->next_config_rom == NULL) {
 		ohci->next_config_rom = next_config_rom;
 		ohci->next_config_rom_bus = next_config_rom_bus;
+		next_config_rom = NULL;
+	}
 
-		copy_config_rom(ohci->next_config_rom, config_rom, length);
+	copy_config_rom(ohci->next_config_rom, config_rom, length);
 
-		ohci->next_header = config_rom[0];
-		ohci->next_config_rom[0] = 0;
+	ohci->next_header = config_rom[0];
+	ohci->next_config_rom[0] = 0;
 
-		reg_write(ohci, OHCI1394_ConfigROMmap,
-			  ohci->next_config_rom_bus);
-		ret = 0;
-	}
+	reg_write(ohci, OHCI1394_ConfigROMmap, ohci->next_config_rom_bus);
 
 	spin_unlock_irqrestore(&ohci->lock, flags);
 
+	/* If we didn't use the DMA allocation, delete it. */
+	if (next_config_rom != NULL)
+		dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
+				  next_config_rom, next_config_rom_bus);
+
 	/*
 	 * Now initiate a bus reset to have the changes take
 	 * effect. We clean up the old config rom memory and DMA
@@ -2263,13 +2277,10 @@ static int ohci_set_config_rom(struct fw_card *card,
 	 * controller could need to access it before the bus reset
 	 * takes effect.
 	 */
-	if (ret == 0)
-		fw_schedule_bus_reset(&ohci->card, true, true);
-	else
-		dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
-				  next_config_rom, next_config_rom_bus);
 
-	return ret;
+	fw_schedule_bus_reset(&ohci->card, true, true);
+
+	return 0;
 }
 
 static void ohci_send_request(struct fw_card *card, struct fw_packet *packet)

drivers/gpu/drm/drm_irq.c

@@ -932,11 +932,34 @@ EXPORT_SYMBOL(drm_vblank_put);
 
 void drm_vblank_off(struct drm_device *dev, int crtc)
 {
+	struct drm_pending_vblank_event *e, *t;
+	struct timeval now;
 	unsigned long irqflags;
+	unsigned int seq;
 
 	spin_lock_irqsave(&dev->vbl_lock, irqflags);
 	vblank_disable_and_save(dev, crtc);
 	DRM_WAKEUP(&dev->vbl_queue[crtc]);
+
+	/* Send any queued vblank events, lest the natives grow disquiet */
+	seq = drm_vblank_count_and_time(dev, crtc, &now);
+	list_for_each_entry_safe(e, t, &dev->vblank_event_list, base.link) {
+		if (e->pipe != crtc)
+			continue;
+		DRM_DEBUG("Sending premature vblank event on disable: \
+			  wanted %d, current %d\n",
+			  e->event.sequence, seq);
+
+		e->event.sequence = seq;
+		e->event.tv_sec = now.tv_sec;
+		e->event.tv_usec = now.tv_usec;
+		drm_vblank_put(dev, e->pipe);
+		list_move_tail(&e->base.link, &e->base.file_priv->event_list);
+		wake_up_interruptible(&e->base.file_priv->event_wait);
+		trace_drm_vblank_event_delivered(e->base.pid, e->pipe,
+						 e->event.sequence);
+	}
+
 	spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
 }
 EXPORT_SYMBOL(drm_vblank_off);

drivers/gpu/drm/radeon/evergreen.c

@@ -862,9 +862,15 @@ int evergreen_pcie_gart_enable(struct radeon_device *rdev)
 		SYSTEM_ACCESS_MODE_NOT_IN_SYS |
 		SYSTEM_APERTURE_UNMAPPED_ACCESS_PASS_THRU |
 		EFFECTIVE_L1_TLB_SIZE(5) | EFFECTIVE_L1_QUEUE_SIZE(5);
-	WREG32(MC_VM_MD_L1_TLB0_CNTL, tmp);
-	WREG32(MC_VM_MD_L1_TLB1_CNTL, tmp);
-	WREG32(MC_VM_MD_L1_TLB2_CNTL, tmp);
+	if (rdev->flags & RADEON_IS_IGP) {
+		WREG32(FUS_MC_VM_MD_L1_TLB0_CNTL, tmp);
+		WREG32(FUS_MC_VM_MD_L1_TLB1_CNTL, tmp);
+		WREG32(FUS_MC_VM_MD_L1_TLB2_CNTL, tmp);
+	} else {
+		WREG32(MC_VM_MD_L1_TLB0_CNTL, tmp);
+		WREG32(MC_VM_MD_L1_TLB1_CNTL, tmp);
+		WREG32(MC_VM_MD_L1_TLB2_CNTL, tmp);
+	}
 	WREG32(MC_VM_MB_L1_TLB0_CNTL, tmp);
 	WREG32(MC_VM_MB_L1_TLB1_CNTL, tmp);
 	WREG32(MC_VM_MB_L1_TLB2_CNTL, tmp);
@@ -2923,11 +2929,6 @@ static int evergreen_startup(struct radeon_device *rdev)
 		rdev->asic->copy = NULL;
 		dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r);
 	}
-	/* XXX: ontario has problems blitting to gart at the moment */
-	if (rdev->family == CHIP_PALM) {
-		rdev->asic->copy = NULL;
-		radeon_ttm_set_active_vram_size(rdev, rdev->mc.visible_vram_size);
-	}
 
 	/* allocate wb buffer */
 	r = radeon_wb_init(rdev);

drivers/gpu/drm/radeon/evergreend.h

@@ -221,6 +221,11 @@
 #define	MC_VM_MD_L1_TLB0_CNTL				0x2654
 #define	MC_VM_MD_L1_TLB1_CNTL				0x2658
 #define	MC_VM_MD_L1_TLB2_CNTL				0x265C
+
+#define	FUS_MC_VM_MD_L1_TLB0_CNTL			0x265C
+#define	FUS_MC_VM_MD_L1_TLB1_CNTL			0x2660
+#define	FUS_MC_VM_MD_L1_TLB2_CNTL			0x2664
+
 #define	MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR		0x203C
 #define	MC_VM_SYSTEM_APERTURE_HIGH_ADDR			0x2038
 #define	MC_VM_SYSTEM_APERTURE_LOW_ADDR			0x2034

drivers/gpu/drm/radeon/radeon_atombios.c

@@ -1599,9 +1599,10 @@ struct radeon_encoder_atom_dig *radeon_atombios_get_lvds_info(struct
 							memcpy((u8 *)edid, (u8 *)&fake_edid_record->ucFakeEDIDString[0],
 							       fake_edid_record->ucFakeEDIDLength);
 
-							if (drm_edid_is_valid(edid))
+							if (drm_edid_is_valid(edid)) {
 								rdev->mode_info.bios_hardcoded_edid = edid;
-							else
+								rdev->mode_info.bios_hardcoded_edid_size = edid_size;
+							} else
 								kfree(edid);
 						}
 					}

drivers/gpu/drm/radeon/radeon_kms.c

@@ -234,6 +234,9 @@ int radeon_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
 			return -EINVAL;
 		}
 		break;
+	case RADEON_INFO_FUSION_GART_WORKING:
+		value = 1;
+		break;
 	default:
 		DRM_DEBUG_KMS("Invalid request %d\n", info->request);
 		return -EINVAL;

drivers/input/touchscreen/wm831x-ts.c

@@ -68,8 +68,23 @@ struct wm831x_ts {
 	unsigned int pd_irq;
 	bool pressure;
 	bool pen_down;
+	struct work_struct pd_data_work;
 };
 
+static void wm831x_pd_data_work(struct work_struct *work)
+{
+	struct wm831x_ts *wm831x_ts =
+		container_of(work, struct wm831x_ts, pd_data_work);
+
+	if (wm831x_ts->pen_down) {
+		enable_irq(wm831x_ts->data_irq);
+		dev_dbg(wm831x_ts->wm831x->dev, "IRQ PD->DATA done\n");
+	} else {
+		enable_irq(wm831x_ts->pd_irq);
+		dev_dbg(wm831x_ts->wm831x->dev, "IRQ DATA->PD done\n");
+	}
+}
+
 static irqreturn_t wm831x_ts_data_irq(int irq, void *irq_data)
 {
 	struct wm831x_ts *wm831x_ts = irq_data;
@@ -110,6 +125,9 @@ static irqreturn_t wm831x_ts_data_irq(int irq, void *irq_data)
 	}
 
 	if (!wm831x_ts->pen_down) {
+		/* Switch from data to pen down */
+		dev_dbg(wm831x->dev, "IRQ DATA->PD\n");
+
 		disable_irq_nosync(wm831x_ts->data_irq);
 
 		/* Don't need data any more */
@@ -128,6 +146,10 @@ static irqreturn_t wm831x_ts_data_irq(int irq, void *irq_data)
 					 ABS_PRESSURE, 0);
 
 		input_report_key(wm831x_ts->input_dev, BTN_TOUCH, 0);
+
+		schedule_work(&wm831x_ts->pd_data_work);
+	} else {
+		input_report_key(wm831x_ts->input_dev, BTN_TOUCH, 1);
 	}
 
 	input_sync(wm831x_ts->input_dev);
@@ -141,6 +163,11 @@ static irqreturn_t wm831x_ts_pen_down_irq(int irq, void *irq_data)
 	struct wm831x *wm831x = wm831x_ts->wm831x;
 	int ena = 0;
 
+	if (wm831x_ts->pen_down)
+		return IRQ_HANDLED;
+
+	disable_irq_nosync(wm831x_ts->pd_irq);
+
 	/* Start collecting data */
 	if (wm831x_ts->pressure)
 		ena |= WM831X_TCH_Z_ENA;
@@ -149,14 +176,14 @@ static irqreturn_t wm831x_ts_pen_down_irq(int irq, void *irq_data)
 			WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA | WM831X_TCH_Z_ENA,
 			WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA | ena);
 
-	input_report_key(wm831x_ts->input_dev, BTN_TOUCH, 1);
-	input_sync(wm831x_ts->input_dev);
-
 	wm831x_set_bits(wm831x, WM831X_INTERRUPT_STATUS_1,
 			WM831X_TCHPD_EINT, WM831X_TCHPD_EINT);
 
 	wm831x_ts->pen_down = true;
-	enable_irq(wm831x_ts->data_irq);
+
+	/* Switch from pen down to data */
+	dev_dbg(wm831x->dev, "IRQ PD->DATA\n");
+	schedule_work(&wm831x_ts->pd_data_work);
 
 	return IRQ_HANDLED;
 }
@@ -182,13 +209,28 @@ static void wm831x_ts_input_close(struct input_dev *idev)
 	struct wm831x_ts *wm831x_ts = input_get_drvdata(idev);
 	struct wm831x *wm831x = wm831x_ts->wm831x;
 
+	/* Shut the controller down, disabling all other functionality too */
 	wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1,
-			WM831X_TCH_ENA | WM831X_TCH_CVT_ENA |
-			WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA |
-			WM831X_TCH_Z_ENA, 0);
+			WM831X_TCH_ENA | WM831X_TCH_X_ENA |
+			WM831X_TCH_Y_ENA | WM831X_TCH_Z_ENA, 0);
 
-	if (wm831x_ts->pen_down)
+	/* Make sure any pending IRQs are done, the above will prevent
+	 * new ones firing.
+	 */
+	synchronize_irq(wm831x_ts->data_irq);
+	synchronize_irq(wm831x_ts->pd_irq);
+
+	/* Make sure the IRQ completion work is quiesced */
+	flush_work_sync(&wm831x_ts->pd_data_work);
+
+	/* If we ended up with the pen down then make sure we revert back
+	 * to pen detection state for the next time we start up.
+	 */
+	if (wm831x_ts->pen_down) {
 		disable_irq(wm831x_ts->data_irq);
+		enable_irq(wm831x_ts->pd_irq);
+		wm831x_ts->pen_down = false;
+	}
 }
 
 static __devinit int wm831x_ts_probe(struct platform_device *pdev)
@@ -198,7 +240,7 @@ static __devinit int wm831x_ts_probe(struct platform_device *pdev)
 	struct wm831x_pdata *core_pdata = dev_get_platdata(pdev->dev.parent);
 	struct wm831x_touch_pdata *pdata = NULL;
 	struct input_dev *input_dev;
-	int error;
+	int error, irqf;
 
 	if (core_pdata)
 		pdata = core_pdata->touch;
@@ -212,6 +254,7 @@ static __devinit int wm831x_ts_probe(struct platform_device *pdev)
 
 	wm831x_ts->wm831x = wm831x;
 	wm831x_ts->input_dev = input_dev;
+	INIT_WORK(&wm831x_ts->pd_data_work, wm831x_pd_data_work);
 
 	/*
 	 * If we have a direct IRQ use it, otherwise use the interrupt
@@ -270,9 +313,14 @@ static __devinit int wm831x_ts_probe(struct platform_device *pdev)
 	wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1,
 			WM831X_TCH_RATE_MASK, 6);
 
+	if (pdata && pdata->data_irqf)
+		irqf = pdata->data_irqf;
+	else
+		irqf = IRQF_TRIGGER_HIGH;
+
 	error = request_threaded_irq(wm831x_ts->data_irq,
 				     NULL, wm831x_ts_data_irq,
-				     IRQF_ONESHOT,
+				     irqf | IRQF_ONESHOT,
 				     "Touchscreen data", wm831x_ts);
 	if (error) {
 		dev_err(&pdev->dev, "Failed to request data IRQ %d: %d\n",
@@ -281,9 +329,14 @@ static __devinit int wm831x_ts_probe(struct platform_device *pdev)
 	}
 	disable_irq(wm831x_ts->data_irq);
 
+	if (pdata && pdata->pd_irqf)
+		irqf = pdata->pd_irqf;
+	else
+		irqf = IRQF_TRIGGER_HIGH;
+
 	error = request_threaded_irq(wm831x_ts->pd_irq,
 				     NULL, wm831x_ts_pen_down_irq,
-				     IRQF_ONESHOT,
+				     irqf | IRQF_ONESHOT,
 				     "Touchscreen pen down", wm831x_ts);
 	if (error) {
 		dev_err(&pdev->dev, "Failed to request pen down IRQ %d: %d\n",

drivers/media/dvb/dvb-usb/Kconfig

@@ -356,6 +356,8 @@ config DVB_USB_LME2510
 	select DVB_TDA826X if !DVB_FE_CUSTOMISE
 	select DVB_STV0288 if !DVB_FE_CUSTOMISE
 	select DVB_IX2505V if !DVB_FE_CUSTOMISE
+	select DVB_STV0299 if !DVB_FE_CUSTOMISE
+	select DVB_PLL if !DVB_FE_CUSTOMISE
 	help
 	  Say Y here to support the LME DM04/QQBOX DVB-S USB2.0 .
 

drivers/media/dvb/ngene/ngene-core.c

@@ -1520,6 +1520,7 @@ static int init_channel(struct ngene_channel *chan)
 	if (dev->ci.en && (io & NGENE_IO_TSOUT)) {
 		dvb_ca_en50221_init(adapter, dev->ci.en, 0, 1);
 		set_transfer(chan, 1);
+		chan->dev->channel[2].DataFormatFlags = DF_SWAP32;
 		set_transfer(&chan->dev->channel[2], 1);
 		dvb_register_device(adapter, &chan->ci_dev,
 				    &ngene_dvbdev_ci, (void *) chan,

drivers/media/radio/saa7706h.c

@@ -376,7 +376,7 @@ static int __devinit saa7706h_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%02x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	state = kmalloc(sizeof(struct saa7706h_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct saa7706h_state), GFP_KERNEL);
 	if (state == NULL)
 		return -ENOMEM;
 	sd = &state->sd;

drivers/media/radio/tef6862.c

@@ -176,7 +176,7 @@ static int __devinit tef6862_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%02x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	state = kmalloc(sizeof(struct tef6862_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct tef6862_state), GFP_KERNEL);
 	if (state == NULL)
 		return -ENOMEM;
 	state->freq = TEF6862_LO_FREQ;

drivers/media/rc/imon.c

@@ -46,7 +46,7 @@
 #define MOD_AUTHOR	"Jarod Wilson <jarod@wilsonet.com>"
 #define MOD_DESC	"Driver for SoundGraph iMON MultiMedia IR/Display"
 #define MOD_NAME	"imon"
-#define MOD_VERSION	"0.9.2"
+#define MOD_VERSION	"0.9.3"
 
 #define DISPLAY_MINOR_BASE	144
 #define DEVICE_NAME	"lcd%d"
@@ -460,8 +460,9 @@ static int display_close(struct inode *inode, struct file *file)
 }
 
 /**
- * Sends a packet to the device -- this function must be called
- * with ictx->lock held.
+ * Sends a packet to the device -- this function must be called with
+ * ictx->lock held, or its unlock/lock sequence while waiting for tx
+ * to complete can/will lead to a deadlock.
  */
 static int send_packet(struct imon_context *ictx)
 {
@@ -991,12 +992,21 @@ static void imon_touch_display_timeout(unsigned long data)
  * the iMON remotes, and those used by the Windows MCE remotes (which is
  * really just RC-6), but only one or the other at a time, as the signals
  * are decoded onboard the receiver.
+ *
+ * This function gets called two different ways, one way is from
+ * rc_register_device, for initial protocol selection/setup, and the other is
+ * via a userspace-initiated protocol change request, either by direct sysfs
+ * prodding or by something like ir-keytable. In the rc_register_device case,
+ * the imon context lock is already held, but when initiated from userspace,
+ * it is not, so we must acquire it prior to calling send_packet, which
+ * requires that the lock is held.
  */
 static int imon_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
 {
 	int retval;
 	struct imon_context *ictx = rc->priv;
 	struct device *dev = ictx->dev;
+	bool unlock = false;
 	unsigned char ir_proto_packet[] = {
 		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 };
 
@@ -1029,6 +1039,11 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
 
 	memcpy(ictx->usb_tx_buf, &ir_proto_packet, sizeof(ir_proto_packet));
 
+	if (!mutex_is_locked(&ictx->lock)) {
+		unlock = true;
+		mutex_lock(&ictx->lock);
+	}
+
 	retval = send_packet(ictx);
 	if (retval)
 		goto out;
@@ -1037,6 +1052,9 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
 	ictx->pad_mouse = false;
 
 out:
+	if (unlock)
+		mutex_unlock(&ictx->lock);
+
 	return retval;
 }
 
@@ -2134,6 +2152,7 @@ static struct imon_context *imon_init_intf0(struct usb_interface *intf)
 		goto rdev_setup_failed;
 	}
 
+	mutex_unlock(&ictx->lock);
 	return ictx;
 
 rdev_setup_failed:
@@ -2205,6 +2224,7 @@ static struct imon_context *imon_init_intf1(struct usb_interface *intf,
 		goto urb_submit_failed;
 	}
 
+	mutex_unlock(&ictx->lock);
 	return ictx;
 
 urb_submit_failed:
@@ -2299,6 +2319,8 @@ static int __devinit imon_probe(struct usb_interface *interface,
 	usb_set_intfdata(interface, ictx);
 
 	if (ifnum == 0) {
+		mutex_lock(&ictx->lock);
+
 		if (product == 0xffdc && ictx->rf_device) {
 			sysfs_err = sysfs_create_group(&interface->dev.kobj,
 						       &imon_rf_attr_group);
@@ -2309,13 +2331,14 @@ static int __devinit imon_probe(struct usb_interface *interface,
 
 		if (ictx->display_supported)
 			imon_init_display(ictx, interface);
+
+		mutex_unlock(&ictx->lock);
 	}
 
 	dev_info(dev, "iMON device (%04x:%04x, intf%d) on "
 		 "usb<%d:%d> initialized\n", vendor, product, ifnum,
 		 usbdev->bus->busnum, usbdev->devnum);
 
-	mutex_unlock(&ictx->lock);
 	mutex_unlock(&driver_lock);
 
 	return 0;

drivers/media/rc/ite-cir.c

@@ -36,6 +36,7 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
+#include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/input.h>
 #include <linux/bitops.h>

drivers/media/rc/mceusb.c

@@ -220,6 +220,8 @@ static struct usb_device_id mceusb_dev_table[] = {
 	{ USB_DEVICE(VENDOR_PHILIPS, 0x206c) },
 	/* Philips/Spinel plus IR transceiver for ASUS */
 	{ USB_DEVICE(VENDOR_PHILIPS, 0x2088) },
+	/* Philips IR transceiver (Dell branded) */
+	{ USB_DEVICE(VENDOR_PHILIPS, 0x2093) },
 	/* Realtek MCE IR Receiver and card reader */
 	{ USB_DEVICE(VENDOR_REALTEK, 0x0161),
 	  .driver_info = MULTIFUNCTION },

drivers/media/rc/rc-main.c

@@ -707,7 +707,8 @@ static void ir_close(struct input_dev *idev)
 {
 	struct rc_dev *rdev = input_get_drvdata(idev);
 
-	rdev->close(rdev);
+	 if (rdev)
+		rdev->close(rdev);
 }
 
 /* class for /sys/class/rc */
@@ -733,6 +734,7 @@ static struct {
 	{ RC_TYPE_SONY,		"sony"		},
 	{ RC_TYPE_RC5_SZ,	"rc-5-sz"	},
 	{ RC_TYPE_LIRC,		"lirc"		},
+	{ RC_TYPE_OTHER,	"other"		},
 };
 
 #define PROTO_NONE	"none"

drivers/media/video/m52790.c

@@ -174,7 +174,7 @@ static int m52790_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	state = kmalloc(sizeof(struct m52790_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct m52790_state), GFP_KERNEL);
 	if (state == NULL)
 		return -ENOMEM;
 

drivers/media/video/tda9840.c

@@ -171,7 +171,7 @@ static int tda9840_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	sd = kmalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
+	sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
 	if (sd == NULL)
 		return -ENOMEM;
 	v4l2_i2c_subdev_init(sd, client, &tda9840_ops);

drivers/media/video/tea6415c.c

@@ -152,7 +152,7 @@ static int tea6415c_probe(struct i2c_client *client,
 
 	v4l_info(client, "chip found @ 0x%x (%s)\n",
 			client->addr << 1, client->adapter->name);
-	sd = kmalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
+	sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
 	if (sd == NULL)
 		return -ENOMEM;
 	v4l2_i2c_subdev_init(sd, client, &tea6415c_ops);

drivers/media/video/tea6420.c

@@ -125,7 +125,7 @@ static int tea6420_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	sd = kmalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
+	sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
 	if (sd == NULL)
 		return -ENOMEM;
 	v4l2_i2c_subdev_init(sd, client, &tea6420_ops);

drivers/media/video/upd64031a.c

@@ -230,7 +230,7 @@ static int upd64031a_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	state = kmalloc(sizeof(struct upd64031a_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct upd64031a_state), GFP_KERNEL);
 	if (state == NULL)
 		return -ENOMEM;
 	sd = &state->sd;

drivers/media/video/upd64083.c

@@ -202,7 +202,7 @@ static int upd64083_probe(struct i2c_client *client,
 	v4l_info(client, "chip found @ 0x%x (%s)\n",
 			client->addr << 1, client->adapter->name);
 
-	state = kmalloc(sizeof(struct upd64083_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct upd64083_state), GFP_KERNEL);
 	if (state == NULL)
 		return -ENOMEM;
 	sd = &state->sd;

drivers/mfd/omap-usb-host.c

@@ -25,7 +25,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/spinlock.h>
 #include <linux/gpio.h>
-#include <linux/regulator/consumer.h>
 #include <plat/usb.h>
 
 #define USBHS_DRIVER_NAME	"usbhs-omap"
@@ -700,8 +699,7 @@ static int usbhs_enable(struct device *dev)
 	dev_dbg(dev, "starting TI HSUSB Controller\n");
 	if (!pdata) {
 		dev_dbg(dev, "missing platform_data\n");
-		ret =  -ENODEV;
-		goto end_enable;
+		return  -ENODEV;
 	}
 
 	spin_lock_irqsave(&omap->lock, flags);
@@ -915,7 +913,8 @@ static int usbhs_enable(struct device *dev)
 
 end_count:
 	omap->count++;
-	goto end_enable;
+	spin_unlock_irqrestore(&omap->lock, flags);
+	return 0;
 
 err_tll:
 	if (pdata->ehci_data->phy_reset) {
@@ -931,8 +930,6 @@ err_tll:
 	clk_disable(omap->usbhost_fs_fck);
 	clk_disable(omap->usbhost_hs_fck);
 	clk_disable(omap->usbhost_ick);
-
-end_enable:
 	spin_unlock_irqrestore(&omap->lock, flags);
 	return ret;
 }

drivers/mmc/core/bus.c

@@ -284,6 +284,7 @@ int mmc_add_card(struct mmc_card *card)
 		type = "SD-combo";
 		if (mmc_card_blockaddr(card))
 			type = "SDHC-combo";
+		break;
 	default:
 		type = "?";
 		break;

drivers/mmc/core/host.c

@@ -94,7 +94,7 @@ static void mmc_host_clk_gate_delayed(struct mmc_host *host)
 		spin_unlock_irqrestore(&host->clk_lock, flags);
 		return;
 	}
-	mutex_lock(&host->clk_gate_mutex);
+	mmc_claim_host(host);
 	spin_lock_irqsave(&host->clk_lock, flags);
 	if (!host->clk_requests) {
 		spin_unlock_irqrestore(&host->clk_lock, flags);
@@ -104,7 +104,7 @@ static void mmc_host_clk_gate_delayed(struct mmc_host *host)
 		pr_debug("%s: gated MCI clock\n", mmc_hostname(host));
 	}
 	spin_unlock_irqrestore(&host->clk_lock, flags);
-	mutex_unlock(&host->clk_gate_mutex);
+	mmc_release_host(host);
 }
 
 /*
@@ -130,7 +130,7 @@ void mmc_host_clk_ungate(struct mmc_host *host)
 {
 	unsigned long flags;
 
-	mutex_lock(&host->clk_gate_mutex);
+	mmc_claim_host(host);
 	spin_lock_irqsave(&host->clk_lock, flags);
 	if (host->clk_gated) {
 		spin_unlock_irqrestore(&host->clk_lock, flags);
@@ -140,7 +140,7 @@ void mmc_host_clk_ungate(struct mmc_host *host)
 	}
 	host->clk_requests++;
 	spin_unlock_irqrestore(&host->clk_lock, flags);
-	mutex_unlock(&host->clk_gate_mutex);
+	mmc_release_host(host);
 }
 
 /**
@@ -215,7 +215,6 @@ static inline void mmc_host_clk_init(struct mmc_host *host)
 	host->clk_gated = false;
 	INIT_WORK(&host->clk_gate_work, mmc_host_clk_gate_work);
 	spin_lock_init(&host->clk_lock);
-	mutex_init(&host->clk_gate_mutex);
 }
 
 /**

drivers/mmc/host/omap.c

@@ -832,7 +832,7 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
 		return IRQ_HANDLED;
 	}
 
-	if (end_command)
+	if (end_command && host->cmd)
 		mmc_omap_cmd_done(host, host->cmd);
 	if (host->data != NULL) {
 		if (transfer_error)

drivers/mmc/host/sdhci-pci.c

@@ -957,6 +957,7 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot(
 	host->ioaddr = pci_ioremap_bar(pdev, bar);
 	if (!host->ioaddr) {
 		dev_err(&pdev->dev, "failed to remap registers\n");
+		ret = -ENOMEM;
 		goto release;
 	}
 

drivers/mmc/host/sdhci.c

@@ -1334,6 +1334,13 @@ static void sdhci_tasklet_finish(unsigned long param)
 
 	host = (struct sdhci_host*)param;
 
+        /*
+         * If this tasklet gets rescheduled while running, it will
+         * be run again afterwards but without any active request.
+         */
+	if (!host->mrq)
+		return;
+
 	spin_lock_irqsave(&host->lock, flags);
 
 	del_timer(&host->timer);
@@ -1345,7 +1352,7 @@ static void sdhci_tasklet_finish(unsigned long param)
 	 * upon error conditions.
 	 */
 	if (!(host->flags & SDHCI_DEVICE_DEAD) &&
-		(mrq->cmd->error ||
+	    ((mrq->cmd && mrq->cmd->error) ||
 		 (mrq->data && (mrq->data->error ||
 		  (mrq->data->stop && mrq->data->stop->error))) ||
 		   (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {

drivers/mmc/host/tmio_mmc_pio.c

@@ -728,15 +728,15 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		tmio_mmc_set_clock(host, ios->clock);
 
 	/* Power sequence - OFF -> UP -> ON */
-	if (ios->power_mode == MMC_POWER_OFF || !ios->clock) {
+	if (ios->power_mode == MMC_POWER_UP) {
+		/* power up SD bus */
+		if (host->set_pwr)
+			host->set_pwr(host->pdev, 1);
+	} else if (ios->power_mode == MMC_POWER_OFF || !ios->clock) {
 		/* power down SD bus */
 		if (ios->power_mode == MMC_POWER_OFF && host->set_pwr)
 			host->set_pwr(host->pdev, 0);
 		tmio_mmc_clk_stop(host);
-	} else if (ios->power_mode == MMC_POWER_UP) {
-		/* power up SD bus */
-		if (host->set_pwr)
-			host->set_pwr(host->pdev, 1);
 	} else {
 		/* start bus clock */
 		tmio_mmc_clk_start(host);

drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c

@@ -2288,7 +2288,3 @@ err_dev:
 	free_netdev(dev);
 	return NULL;
 }
-
-EXPORT_SYMBOL(init_ft1000_card);
-EXPORT_SYMBOL(stop_ft1000_card);
-EXPORT_SYMBOL(flarion_ft1000_cnt);

drivers/staging/ft1000/ft1000-pcmcia/ft1000_proc.c

@@ -214,6 +214,3 @@ void ft1000CleanupProc(struct net_device *dev)
 	remove_proc_entry(FT1000_PROC, init_net.proc_net);
 	unregister_netdevice_notifier(&ft1000_netdev_notifier);
 }
-
-EXPORT_SYMBOL(ft1000InitProc);
-EXPORT_SYMBOL(ft1000CleanupProc);

drivers/staging/gma500/Kconfig

@@ -1,6 +1,6 @@
 config DRM_PSB
 	tristate "Intel GMA500 KMS Framebuffer"
-	depends on DRM && PCI
+	depends on DRM && PCI && X86
 	select FB_CFB_COPYAREA
         select FB_CFB_FILLRECT
         select FB_CFB_IMAGEBLIT

drivers/staging/intel_sst/intelmid_v1_control.c

@@ -28,6 +28,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/pci.h>
+#include <linux/delay.h>
 #include <linux/file.h>
 #include <asm/mrst.h>
 #include <sound/pcm.h>

drivers/staging/intel_sst/intelmid_v2_control.c

@@ -29,6 +29,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/pci.h>
+#include <linux/delay.h>
 #include <linux/file.h>
 #include "intel_sst.h"
 #include "intelmid_snd_control.h"

drivers/staging/olpc_dcon/olpc_dcon_xo_1.c

@@ -12,6 +12,7 @@
  */
 #include <linux/cs5535.h>
 #include <linux/gpio.h>
+#include <linux/delay.h>
 #include <asm/olpc.h>
 
 #include "olpc_dcon.h"

drivers/staging/rts_pstor/debug.h

@@ -28,7 +28,7 @@
 
 #define RTSX_STOR "rts_pstor: "
 
-#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
 #define RTSX_DEBUGP(x...) printk(KERN_DEBUG RTSX_STOR x)
 #define RTSX_DEBUGPN(x...) printk(KERN_DEBUG x)
 #define RTSX_DEBUGPX(x...) printk(x)

drivers/staging/rts_pstor/ms.c

@@ -23,6 +23,7 @@
 #include <linux/blkdev.h>
 #include <linux/kthread.h>
 #include <linux/sched.h>
+#include <linux/vmalloc.h>
 
 #include "rtsx.h"
 #include "rtsx_transport.h"

drivers/staging/rts_pstor/rtsx_chip.c

@@ -24,6 +24,7 @@
 #include <linux/kthread.h>
 #include <linux/sched.h>
 #include <linux/workqueue.h>
+#include <linux/vmalloc.h>
 
 #include "rtsx.h"
 #include "rtsx_transport.h"
@@ -1311,11 +1312,11 @@ void rtsx_polling_func(struct rtsx_chip *chip)
 
 #ifdef SUPPORT_OCP
 	if (CHECK_LUN_MODE(chip, SD_MS_2LUN)) {
-		#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
 		if (chip->ocp_stat & (SD_OC_NOW | SD_OC_EVER | MS_OC_NOW | MS_OC_EVER)) {
 			RTSX_DEBUGP("Over current, OCPSTAT is 0x%x\n", chip->ocp_stat);
 		}
-		#endif
+#endif
 
 		if (chip->ocp_stat & (SD_OC_NOW | SD_OC_EVER)) {
 			if (chip->card_exist & SD_CARD) {

drivers/staging/rts_pstor/rtsx_scsi.c

@@ -23,6 +23,7 @@
 #include <linux/blkdev.h>
 #include <linux/kthread.h>
 #include <linux/sched.h>
+#include <linux/vmalloc.h>
 
 #include "rtsx.h"
 #include "rtsx_transport.h"

drivers/staging/rts_pstor/sd.c

@@ -909,7 +909,7 @@ static int sd_change_phase(struct rtsx_chip *chip, u8 sample_point, u8 tune_dir)
 		RTSX_WRITE_REG(chip, SD_VPCLK0_CTL, PHASE_NOT_RESET, PHASE_NOT_RESET);
 		RTSX_WRITE_REG(chip, CLK_CTL, CHANGE_CLK, 0);
 	} else {
-#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
 		rtsx_read_register(chip, SD_VP_CTL, &val);
 		RTSX_DEBUGP("SD_VP_CTL: 0x%x\n", val);
 		rtsx_read_register(chip, SD_DCMPS_CTL, &val);
@@ -958,7 +958,7 @@ static int sd_change_phase(struct rtsx_chip *chip, u8 sample_point, u8 tune_dir)
 	return STATUS_SUCCESS;
 
 Fail:
-#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
 	rtsx_read_register(chip, SD_VP_CTL, &val);
 	RTSX_DEBUGP("SD_VP_CTL: 0x%x\n", val);
 	rtsx_read_register(chip, SD_DCMPS_CTL, &val);

drivers/staging/rts_pstor/trace.h

@@ -82,7 +82,7 @@ do {													\
 #define TRACE_GOTO(chip, label)	goto label
 #endif
 
-#if CONFIG_RTS_PSTOR_DEBUG
+#ifdef CONFIG_RTS_PSTOR_DEBUG
 static inline void rtsx_dump(u8 *buf, int buf_len)
 {
 	int i;

drivers/staging/rts_pstor/xd.c

@@ -23,6 +23,7 @@
 #include <linux/blkdev.h>
 #include <linux/kthread.h>
 #include <linux/sched.h>
+#include <linux/vmalloc.h>
 
 #include "rtsx.h"
 #include "rtsx_transport.h"

drivers/staging/solo6x10/Kconfig

@@ -2,6 +2,7 @@ config SOLO6X10
 	tristate "Softlogic 6x10 MPEG codec cards"
 	depends on PCI && VIDEO_DEV && SND && I2C
 	select VIDEOBUF_DMA_SG
+	select SND_PCM
 	---help---
 	  This driver supports the Softlogic based MPEG-4 and h.264 codec
 	  codec cards.

drivers/staging/usbip/vhci_hcd.c

@@ -876,8 +876,10 @@ static void vhci_shutdown_connection(struct usbip_device *ud)
 	}
 
 	/* kill threads related to this sdev, if v.c. exists */
-	kthread_stop(vdev->ud.tcp_rx);
-	kthread_stop(vdev->ud.tcp_tx);
+	if (vdev->ud.tcp_rx)
+		kthread_stop(vdev->ud.tcp_rx);
+	if (vdev->ud.tcp_tx)
+		kthread_stop(vdev->ud.tcp_tx);
 
 	usbip_uinfo("stop threads\n");
 
@@ -949,9 +951,6 @@ static void vhci_device_init(struct vhci_device *vdev)
 {
 	memset(vdev, 0, sizeof(*vdev));
 
-	vdev->ud.tcp_rx = kthread_create(vhci_rx_loop, &vdev->ud, "vhci_rx");
-	vdev->ud.tcp_tx = kthread_create(vhci_tx_loop, &vdev->ud, "vhci_tx");
-
 	vdev->ud.side   = USBIP_VHCI;
 	vdev->ud.status = VDEV_ST_NULL;
 	/* vdev->ud.lock   = SPIN_LOCK_UNLOCKED; */
@@ -1139,7 +1138,7 @@ static int vhci_hcd_probe(struct platform_device *pdev)
 		usbip_uerr("create hcd failed\n");
 		return -ENOMEM;
 	}
-
+	hcd->has_tt = 1;
 
 	/* this is private data for vhci_hcd */
 	the_controller = hcd_to_vhci(hcd);

drivers/staging/usbip/vhci_sysfs.c

@@ -21,6 +21,7 @@
 #include "vhci.h"
 
 #include <linux/in.h>
+#include <linux/kthread.h>
 
 /* TODO: refine locking ?*/
 
@@ -220,13 +221,13 @@ static ssize_t store_attach(struct device *dev, struct device_attribute *attr,
 	vdev->ud.tcp_socket = socket;
 	vdev->ud.status     = VDEV_ST_NOTASSIGNED;
 
-	wake_up_process(vdev->ud.tcp_rx);
-	wake_up_process(vdev->ud.tcp_tx);
-
 	spin_unlock(&vdev->ud.lock);
 	spin_unlock(&the_controller->lock);
 	/* end the lock */
 
+	vdev->ud.tcp_rx = kthread_run(vhci_rx_loop, &vdev->ud, "vhci_rx");
+	vdev->ud.tcp_tx = kthread_run(vhci_tx_loop, &vdev->ud, "vhci_tx");
+
 	rh_port_connect(rhport, speed);
 
 	return count;

drivers/staging/wlan-ng/cfg80211.c

@@ -273,7 +273,7 @@ exit:
 }
 
 int prism2_set_default_key(struct wiphy *wiphy, struct net_device *dev,
-			   u8 key_index)
+			   u8 key_index, bool unicast, bool multicast)
 {
 	wlandevice_t *wlandev = dev->ml_priv;
 

drivers/usb/host/ehci-omap.c

@@ -40,6 +40,7 @@
 #include <linux/slab.h>
 #include <linux/usb/ulpi.h>
 #include <plat/usb.h>
+#include <linux/regulator/consumer.h>
 
 /* EHCI Register Set */
 #define EHCI_INSNREG04					(0xA0)
@@ -118,6 +119,8 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 	struct ehci_hcd				*omap_ehci;
 	int					ret = -ENODEV;
 	int					irq;
+	int					i;
+	char					supply[7];
 
 	if (usb_disabled())
 		return -ENODEV;
@@ -158,6 +161,23 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 	hcd->rsrc_len = resource_size(res);
 	hcd->regs = regs;
 
+	/* get ehci regulator and enable */
+	for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
+		if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) {
+			pdata->regulator[i] = NULL;
+			continue;
+		}
+		snprintf(supply, sizeof(supply), "hsusb%d", i);
+		pdata->regulator[i] = regulator_get(dev, supply);
+		if (IS_ERR(pdata->regulator[i])) {
+			pdata->regulator[i] = NULL;
+			dev_dbg(dev,
+			"failed to get ehci port%d regulator\n", i);
+		} else {
+			regulator_enable(pdata->regulator[i]);
+		}
+	}
+
 	ret = omap_usbhs_enable(dev);
 	if (ret) {
 		dev_err(dev, "failed to start usbhs with err %d\n", ret);

drivers/usb/host/isp1760-hcd.c

@@ -1633,6 +1633,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 			ints[i].qh = NULL;
 			ints[i].qtd = NULL;
 
+			urb->status = status;
 			isp1760_urb_done(hcd, urb);
 			if (qtd)
 				pe(hcd, qh, qtd);

drivers/usb/host/xhci-hub.c

@@ -777,7 +777,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 		if (t1 != t2)
 			xhci_writel(xhci, t2, port_array[port_index]);
 
-		if (DEV_HIGHSPEED(t1)) {
+		if (hcd->speed != HCD_USB3) {
 			/* enable remote wake up for USB 2.0 */
 			u32 __iomem *addr;
 			u32 tmp;
@@ -866,6 +866,21 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 				temp |= PORT_LINK_STROBE | XDEV_U0;
 				xhci_writel(xhci, temp, port_array[port_index]);
 			}
+			/* wait for the port to enter U0 and report port link
+			 * state change.
+			 */
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			msleep(20);
+			spin_lock_irqsave(&xhci->lock, flags);
+
+			/* Clear PLC */
+			temp = xhci_readl(xhci, port_array[port_index]);
+			if (temp & PORT_PLC) {
+				temp = xhci_port_state_to_neutral(temp);
+				temp |= PORT_PLC;
+				xhci_writel(xhci, temp, port_array[port_index]);
+			}
+
 			slot_id = xhci_find_slot_id_by_port(hcd,
 					xhci, port_index + 1);
 			if (slot_id)
@@ -873,7 +888,7 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 		} else
 			xhci_writel(xhci, temp, port_array[port_index]);
 
-		if (DEV_HIGHSPEED(temp)) {
+		if (hcd->speed != HCD_USB3) {
 			/* disable remote wake up for USB 2.0 */
 			u32 __iomem *addr;
 			u32 tmp;

drivers/usb/musb/musb_gadget.c

@@ -1887,11 +1887,9 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 			otg_set_vbus(musb->xceiv, 1);
 
 		hcd->self.uses_pio_for_control = 1;
-
-		if (musb->xceiv->last_event == USB_EVENT_NONE)
-			pm_runtime_put(musb->controller);
-
 	}
+	if (musb->xceiv->last_event == USB_EVENT_NONE)
+		pm_runtime_put(musb->controller);
 
 	return 0;
 

drivers/usb/musb/omap2430.c

@@ -270,7 +270,7 @@ static int musb_otg_notifications(struct notifier_block *nb,
 		DBG(4, "VBUS Disconnect\n");
 
 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
-		if (is_otg_enabled(musb))
+		if (is_otg_enabled(musb) || is_peripheral_enabled(musb))
 			if (musb->gadget_driver)
 #endif
 			{

fs/ceph/addr.c

@@ -775,6 +775,13 @@ get_more_pages:
 					    ci->i_truncate_seq,
 					    ci->i_truncate_size,
 					    &inode->i_mtime, true, 1, 0);
+
+				if (!req) {
+					rc = -ENOMEM;
+					unlock_page(page);
+					break;
+				}
+
 				max_pages = req->r_num_pages;
 
 				alloc_page_vec(fsc, req);

fs/ceph/caps.c

@@ -1331,10 +1331,11 @@ static void ceph_flush_snaps(struct ceph_inode_info *ci)
 }
 
 /*
- * Mark caps dirty.  If inode is newly dirty, add to the global dirty
- * list.
+ * Mark caps dirty.  If inode is newly dirty, return the dirty flags.
+ * Caller is then responsible for calling __mark_inode_dirty with the
+ * returned flags value.
  */
-void __ceph_mark_dirty_caps(struct ceph_inode_info *ci, int mask)
+int __ceph_mark_dirty_caps(struct ceph_inode_info *ci, int mask)
 {
 	struct ceph_mds_client *mdsc =
 		ceph_sb_to_client(ci->vfs_inode.i_sb)->mdsc;
@@ -1357,7 +1358,7 @@ void __ceph_mark_dirty_caps(struct ceph_inode_info *ci, int mask)
 		list_add(&ci->i_dirty_item, &mdsc->cap_dirty);
 		spin_unlock(&mdsc->cap_dirty_lock);
 		if (ci->i_flushing_caps == 0) {
-			igrab(inode);
+			ihold(inode);
 			dirty |= I_DIRTY_SYNC;
 		}
 	}
@@ -1365,9 +1366,8 @@ void __ceph_mark_dirty_caps(struct ceph_inode_info *ci, int mask)
 	if (((was | ci->i_flushing_caps) & CEPH_CAP_FILE_BUFFER) &&
 	    (mask & CEPH_CAP_FILE_BUFFER))
 		dirty |= I_DIRTY_DATASYNC;
-	if (dirty)
-		__mark_inode_dirty(inode, dirty);
 	__cap_delay_requeue(mdsc, ci);
+	return dirty;
 }
 
 /*
@@ -1991,7 +1991,7 @@ static void __take_cap_refs(struct ceph_inode_info *ci, int got)
 		ci->i_wr_ref++;
 	if (got & CEPH_CAP_FILE_BUFFER) {
 		if (ci->i_wrbuffer_ref == 0)
-			igrab(&ci->vfs_inode);
+			ihold(&ci->vfs_inode);
 		ci->i_wrbuffer_ref++;
 		dout("__take_cap_refs %p wrbuffer %d -> %d (?)\n",
 		     &ci->vfs_inode, ci->i_wrbuffer_ref-1, ci->i_wrbuffer_ref);

fs/ceph/file.c

@@ -734,9 +734,12 @@ retry_snap:
 		}
 	}
 	if (ret >= 0) {
+		int dirty;
 		spin_lock(&inode->i_lock);
-		__ceph_mark_dirty_caps(ci, CEPH_CAP_FILE_WR);
+		dirty = __ceph_mark_dirty_caps(ci, CEPH_CAP_FILE_WR);
 		spin_unlock(&inode->i_lock);
+		if (dirty)
+			__mark_inode_dirty(inode, dirty);
 	}
 
 out:

fs/ceph/inode.c

@@ -1567,6 +1567,7 @@ int ceph_setattr(struct dentry *dentry, struct iattr *attr)
 	int release = 0, dirtied = 0;
 	int mask = 0;
 	int err = 0;
+	int inode_dirty_flags = 0;
 
 	if (ceph_snap(inode) != CEPH_NOSNAP)
 		return -EROFS;
@@ -1725,13 +1726,16 @@ int ceph_setattr(struct dentry *dentry, struct iattr *attr)
 		dout("setattr %p ATTR_FILE ... hrm!\n", inode);
 
 	if (dirtied) {
-		__ceph_mark_dirty_caps(ci, dirtied);
+		inode_dirty_flags = __ceph_mark_dirty_caps(ci, dirtied);
 		inode->i_ctime = CURRENT_TIME;
 	}
 
 	release &= issued;
 	spin_unlock(&inode->i_lock);
 
+	if (inode_dirty_flags)
+		__mark_inode_dirty(inode, inode_dirty_flags);
+
 	if (mask) {
 		req->r_inode = igrab(inode);
 		req->r_inode_drop = release;

fs/ceph/super.h

@@ -506,7 +506,7 @@ static inline int __ceph_caps_dirty(struct ceph_inode_info *ci)
 {
 	return ci->i_dirty_caps | ci->i_flushing_caps;
 }
-extern void __ceph_mark_dirty_caps(struct ceph_inode_info *ci, int mask);
+extern int __ceph_mark_dirty_caps(struct ceph_inode_info *ci, int mask);
 
 extern int ceph_caps_revoking(struct ceph_inode_info *ci, int mask);
 extern int __ceph_caps_used(struct ceph_inode_info *ci);

fs/ceph/xattr.c

@@ -703,6 +703,7 @@ int ceph_setxattr(struct dentry *dentry, const char *name,
 	struct ceph_inode_xattr *xattr = NULL;
 	int issued;
 	int required_blob_size;
+	int dirty;
 
 	if (ceph_snap(inode) != CEPH_NOSNAP)
 		return -EROFS;
@@ -763,11 +764,12 @@ retry:
 	dout("setxattr %p issued %s\n", inode, ceph_cap_string(issued));
 	err = __set_xattr(ci, newname, name_len, newval,
 			  val_len, 1, 1, 1, &xattr);
-	__ceph_mark_dirty_caps(ci, CEPH_CAP_XATTR_EXCL);
+	dirty = __ceph_mark_dirty_caps(ci, CEPH_CAP_XATTR_EXCL);
 	ci->i_xattrs.dirty = true;
 	inode->i_ctime = CURRENT_TIME;
 	spin_unlock(&inode->i_lock);
-
+	if (dirty)
+		__mark_inode_dirty(inode, dirty);
 	return err;
 
 do_sync:
@@ -810,6 +812,7 @@ int ceph_removexattr(struct dentry *dentry, const char *name)
 	struct ceph_vxattr_cb *vxattrs = ceph_inode_vxattrs(inode);
 	int issued;
 	int err;
+	int dirty;
 
 	if (ceph_snap(inode) != CEPH_NOSNAP)
 		return -EROFS;
@@ -833,12 +836,13 @@ int ceph_removexattr(struct dentry *dentry, const char *name)
 		goto do_sync;
 
 	err = __remove_xattr_by_name(ceph_inode(inode), name);
-	__ceph_mark_dirty_caps(ci, CEPH_CAP_XATTR_EXCL);
+	dirty = __ceph_mark_dirty_caps(ci, CEPH_CAP_XATTR_EXCL);
 	ci->i_xattrs.dirty = true;
 	inode->i_ctime = CURRENT_TIME;
 
 	spin_unlock(&inode->i_lock);
-
+	if (dirty)
+		__mark_inode_dirty(inode, dirty);
 	return err;
 do_sync:
 	spin_unlock(&inode->i_lock);

fs/logfs/super.c

@@ -480,10 +480,6 @@ static int logfs_read_sb(struct super_block *sb, int read_only)
 			!read_only)
 		return -EIO;
 
-	mutex_init(&super->s_dirop_mutex);
-	mutex_init(&super->s_object_alias_mutex);
-	INIT_LIST_HEAD(&super->s_freeing_list);
-
 	ret = logfs_init_rw(sb);
 	if (ret)
 		return ret;
@@ -601,6 +597,10 @@ static struct dentry *logfs_mount(struct file_system_type *type, int flags,
 	if (!super)
 		return ERR_PTR(-ENOMEM);
 
+	mutex_init(&super->s_dirop_mutex);
+	mutex_init(&super->s_object_alias_mutex);
+	INIT_LIST_HEAD(&super->s_freeing_list);
+
 	if (!devname)
 		err = logfs_get_sb_bdev(super, type, devname);
 	else if (strncmp(devname, "mtd", 3))

include/drm/drm_pciids.h

@@ -155,6 +155,7 @@
 	{0x1002, 0x6719, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x671c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x671d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x671f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6720, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6721, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6722, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_NEW_MEMMAP}, \
@@ -167,6 +168,7 @@
 	{0x1002, 0x6729, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6738, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6739, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x673e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_BARTS|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6740, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6741, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6742, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
@@ -199,6 +201,7 @@
 	{0x1002, 0x688D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6898, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6899, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x689b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x689c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HEMLOCK|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x689d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HEMLOCK|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x689e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
@@ -209,7 +212,9 @@
 	{0x1002, 0x68b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x68b8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x68b9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68ba, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x68be, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68bf, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x68c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_REDWOOD|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x68c1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_REDWOOD|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x68c7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_REDWOOD|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \

include/drm/radeon_drm.h

@@ -910,6 +910,7 @@ struct drm_radeon_cs {
 #define RADEON_INFO_CLOCK_CRYSTAL_FREQ	0x09 /* clock crystal frequency */
 #define RADEON_INFO_NUM_BACKENDS	0x0a /* DB/backends for r600+ - need for OQ */
 #define RADEON_INFO_NUM_TILE_PIPES	0x0b /* tile pipes for r600+ */
+#define RADEON_INFO_FUSION_GART_WORKING	0x0c /* fusion writes to GTT were broken before this */
 
 struct drm_radeon_info {
 	uint32_t		request;

include/linux/flex_array.h

@@ -61,7 +61,7 @@ struct flex_array {
 struct flex_array *flex_array_alloc(int element_size, unsigned int total,
 		gfp_t flags);
 int flex_array_prealloc(struct flex_array *fa, unsigned int start,
-		unsigned int end, gfp_t flags);
+		unsigned int nr_elements, gfp_t flags);
 void flex_array_free(struct flex_array *fa);
 void flex_array_free_parts(struct flex_array *fa);
 int flex_array_put(struct flex_array *fa, unsigned int element_nr, void *src,

include/linux/mfd/wm831x/pdata.h

@@ -81,7 +81,9 @@ struct wm831x_touch_pdata {
 	int rpu;               /** Pen down sensitivity resistor divider */
 	int pressure;          /** Report pressure (boolean) */
 	unsigned int data_irq; /** Touch data ready IRQ */
+	int data_irqf;         /** IRQ flags for data ready IRQ */
 	unsigned int pd_irq;   /** Touch pendown detect IRQ */
+	int pd_irqf;           /** IRQ flags for pen down IRQ */
 };
 
 enum wm831x_watchdog_action {

include/linux/mmc/host.h

@@ -183,7 +183,6 @@ struct mmc_host {
 	struct work_struct	clk_gate_work; /* delayed clock gate */
 	unsigned int		clk_old;	/* old clock value cache */
 	spinlock_t		clk_lock;	/* lock for clk fields */
-	struct mutex		clk_gate_mutex;	/* mutex for clock gating */
 #endif
 
 	/* host specific block data */

include/linux/percpu.h

@@ -948,7 +948,7 @@ do {									\
 	irqsafe_generic_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
 # endif
 # define irqsafe_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
-	__pcpu_double_call_return_int(irqsafe_cpu_cmpxchg_double_, (pcp1), (pcp2), (oval1), (oval2), (nval1), (nval2))
+	__pcpu_double_call_return_bool(irqsafe_cpu_cmpxchg_double_, (pcp1), (pcp2), (oval1), (oval2), (nval1), (nval2))
 #endif
 
 #endif /* __LINUX_PERCPU_H */

kernel/irq/proc.c

@@ -419,7 +419,7 @@ int show_interrupts(struct seq_file *p, void *v)
 	} else {
 		seq_printf(p, " %8s", "None");
 	}
-#ifdef CONFIG_GENIRC_IRQ_SHOW_LEVEL
+#ifdef CONFIG_GENERIC_IRQ_SHOW_LEVEL
 	seq_printf(p, " %-8s", irqd_is_level_type(&desc->irq_data) ? "Level" : "Edge");
 #endif
 	if (desc->name)

lib/flex_array.c

@@ -232,10 +232,10 @@ EXPORT_SYMBOL(flex_array_clear);
 
 /**
  * flex_array_prealloc - guarantee that array space exists
- * @fa:		the flex array for which to preallocate parts
- * @start:	index of first array element for which space is allocated
- * @end:	index of last (inclusive) element for which space is allocated
- * @flags:	page allocation flags
+ * @fa:			the flex array for which to preallocate parts
+ * @start:		index of first array element for which space is allocated
+ * @nr_elements:	number of elements for which space is allocated
+ * @flags:		page allocation flags
  *
  * This will guarantee that no future calls to flex_array_put()
  * will allocate memory.  It can be used if you are expecting to
@@ -245,14 +245,24 @@ EXPORT_SYMBOL(flex_array_clear);
  * Locking must be provided by the caller.
  */
 int flex_array_prealloc(struct flex_array *fa, unsigned int start,
-			unsigned int end, gfp_t flags)
+			unsigned int nr_elements, gfp_t flags)
 {
 	int start_part;
 	int end_part;
 	int part_nr;
+	unsigned int end;
 	struct flex_array_part *part;
 
-	if (start >= fa->total_nr_elements || end >= fa->total_nr_elements)
+	if (!start && !nr_elements)
+		return 0;
+	if (start >= fa->total_nr_elements)
+		return -ENOSPC;
+	if (!nr_elements)
+		return 0;
+
+	end = start + nr_elements - 1;
+
+	if (end >= fa->total_nr_elements)
 		return -ENOSPC;
 	if (elements_fit_in_base(fa))
 		return 0;
@@ -343,6 +353,8 @@ int flex_array_shrink(struct flex_array *fa)
 	int part_nr;
 	int ret = 0;
 
+	if (!fa->total_nr_elements)
+		return 0;
 	if (elements_fit_in_base(fa))
 		return ret;
 	for (part_nr = 0; part_nr < FLEX_ARRAY_NR_BASE_PTRS; part_nr++) {

mm/memory.c

@@ -1359,7 +1359,7 @@ split_fallthrough:
 		 */
 		mark_page_accessed(page);
 	}
-	if (flags & FOLL_MLOCK) {
+	if ((flags & FOLL_MLOCK) && (vma->vm_flags & VM_LOCKED)) {
 		/*
 		 * The preliminary mapping check is mainly to avoid the
 		 * pointless overhead of lock_page on the ZERO_PAGE
@@ -1552,10 +1552,9 @@ int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
 		}
 
 		/*
-		 * If we don't actually want the page itself,
-		 * and it's the stack guard page, just skip it.
+		 * For mlock, just skip the stack guard page.
 		 */
-		if (!pages && stack_guard_page(vma, start))
+		if ((gup_flags & FOLL_MLOCK) && stack_guard_page(vma, start))
 			goto next_page;
 
 		do {

mm/mlock.c

@@ -162,7 +162,7 @@ static long __mlock_vma_pages_range(struct vm_area_struct *vma,
 	VM_BUG_ON(end   > vma->vm_end);
 	VM_BUG_ON(!rwsem_is_locked(&mm->mmap_sem));
 
-	gup_flags = FOLL_TOUCH;
+	gup_flags = FOLL_TOUCH | FOLL_MLOCK;
 	/*
 	 * We want to touch writable mappings with a write fault in order
 	 * to break COW, except for shared mappings because these don't COW
@@ -178,9 +178,6 @@ static long __mlock_vma_pages_range(struct vm_area_struct *vma,
 	if (vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC))
 		gup_flags |= FOLL_FORCE;
 
-	if (vma->vm_flags & VM_LOCKED)
-		gup_flags |= FOLL_MLOCK;
-
 	return __get_user_pages(current, mm, addr, nr_pages, gup_flags,
 				NULL, NULL, nonblocking);
 }

mm/slub.c

@@ -1940,7 +1940,7 @@ redo:
 		 * Since this is without lock semantics the protection is only against
 		 * code executing on this cpu *not* from access by other cpus.
 		 */
-		if (unlikely(!this_cpu_cmpxchg_double(
+		if (unlikely(!irqsafe_cpu_cmpxchg_double(
 				s->cpu_slab->freelist, s->cpu_slab->tid,
 				object, tid,
 				get_freepointer(s, object), next_tid(tid)))) {
@@ -2145,7 +2145,7 @@ redo:
 		set_freepointer(s, object, c->freelist);
 
 #ifdef CONFIG_CMPXCHG_LOCAL
-		if (unlikely(!this_cpu_cmpxchg_double(
+		if (unlikely(!irqsafe_cpu_cmpxchg_double(
 				s->cpu_slab->freelist, s->cpu_slab->tid,
 				c->freelist, tid,
 				object, next_tid(tid)))) {

net/ceph/messenger.c

@@ -2267,6 +2267,19 @@ struct ceph_msg *ceph_msg_new(int type, int front_len, gfp_t flags)
 	m->more_to_follow = false;
 	m->pool = NULL;
 
+	/* middle */
+	m->middle = NULL;
+
+	/* data */
+	m->nr_pages = 0;
+	m->page_alignment = 0;
+	m->pages = NULL;
+	m->pagelist = NULL;
+	m->bio = NULL;
+	m->bio_iter = NULL;
+	m->bio_seg = 0;
+	m->trail = NULL;
+
 	/* front */
 	if (front_len) {
 		if (front_len > PAGE_CACHE_SIZE) {
@@ -2286,19 +2299,6 @@ struct ceph_msg *ceph_msg_new(int type, int front_len, gfp_t flags)
 	}
 	m->front.iov_len = front_len;
 
-	/* middle */
-	m->middle = NULL;
-
-	/* data */
-	m->nr_pages = 0;
-	m->page_alignment = 0;
-	m->pages = NULL;
-	m->pagelist = NULL;
-	m->bio = NULL;
-	m->bio_iter = NULL;
-	m->bio_seg = 0;
-	m->trail = NULL;
-
 	dout("ceph_msg_new %p front %d\n", m, front_len);
 	return m;
 

net/ceph/osd_client.c

@@ -470,8 +470,8 @@ struct ceph_osd_request *ceph_osdc_new_request(struct ceph_osd_client *osdc,
 					 snapc, ops,
 					 use_mempool,
 					 GFP_NOFS, NULL, NULL);
-	if (IS_ERR(req))
-		return req;
+	if (!req)
+		return NULL;
 
 	/* calculate max write size */
 	calc_layout(osdc, vino, layout, off, plen, req, ops);

security/selinux/hooks.c

@@ -1578,7 +1578,8 @@ static int may_create(struct inode *dir,
 		return rc;
 
 	if (!newsid || !(sbsec->flags & SE_SBLABELSUPP)) {
-		rc = security_transition_sid(sid, dsec->sid, tclass, NULL, &newsid);
+		rc = security_transition_sid(sid, dsec->sid, tclass,
+					     &dentry->d_name, &newsid);
 		if (rc)
 			return rc;
 	}

security/selinux/ss/policydb.c

@@ -502,7 +502,7 @@ static int policydb_index(struct policydb *p)
 		goto out;
 
 	rc = flex_array_prealloc(p->type_val_to_struct_array, 0,
-				 p->p_types.nprim - 1, GFP_KERNEL | __GFP_ZERO);
+				 p->p_types.nprim, GFP_KERNEL | __GFP_ZERO);
 	if (rc)
 		goto out;
 
@@ -519,7 +519,7 @@ static int policydb_index(struct policydb *p)
 			goto out;
 
 		rc = flex_array_prealloc(p->sym_val_to_name[i],
-					 0, p->symtab[i].nprim - 1,
+					 0, p->symtab[i].nprim,
 					 GFP_KERNEL | __GFP_ZERO);
 		if (rc)
 			goto out;
@@ -2375,7 +2375,7 @@ int policydb_read(struct policydb *p, void *fp)
 		goto bad;
 
 	/* preallocate so we don't have to worry about the put ever failing */
-	rc = flex_array_prealloc(p->type_attr_map_array, 0, p->p_types.nprim - 1,
+	rc = flex_array_prealloc(p->type_attr_map_array, 0, p->p_types.nprim,
 				 GFP_KERNEL | __GFP_ZERO);
 	if (rc)
 		goto bad;