Merge branch 'for-linville' of git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx

arch/arm/mach-omap2/board-omap3evm.c

@@ -309,7 +309,7 @@ static struct omap2_hsmmc_info mmc[] = {
 		.gpio_wp	= 63,
 		.deferred	= true,
 	},
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_WILINK_PLATFORM_DATA
 	{
 		.name		= "wl1271",
 		.mmc		= 2,
@@ -450,7 +450,7 @@ static struct regulator_init_data omap3evm_vio = {
 	.consumer_supplies	= omap3evm_vio_supply,
 };
 
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_WILINK_PLATFORM_DATA
 
 #define OMAP3EVM_WLAN_PMENA_GPIO	(150)
 #define OMAP3EVM_WLAN_IRQ_GPIO		(149)
@@ -563,7 +563,7 @@ static struct omap_board_mux omap35x_board_mux[] __initdata = {
 				OMAP_PIN_OFF_NONE),
 	OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
 				OMAP_PIN_OFF_NONE),
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_WILINK_PLATFORM_DATA
 	/* WLAN IRQ - GPIO 149 */
 	OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
 
@@ -601,7 +601,7 @@ static struct omap_board_mux omap36x_board_mux[] __initdata = {
 	OMAP3_MUX(SYS_BOOT4, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
 	OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
 	OMAP3_MUX(SYS_BOOT6, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_WILINK_PLATFORM_DATA
 	/* WLAN IRQ - GPIO 149 */
 	OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
 
@@ -637,7 +637,7 @@ static struct gpio omap3_evm_ehci_gpios[] __initdata = {
 
 static void __init omap3_evm_wl12xx_init(void)
 {
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_WILINK_PLATFORM_DATA
 	int ret;
 
 	/* WL12xx WLAN Init */

drivers/net/wireless/ti/Kconfig

@@ -12,4 +12,13 @@ source "drivers/net/wireless/ti/wl18xx/Kconfig"
 
 # keep last for automatic dependencies
 source "drivers/net/wireless/ti/wlcore/Kconfig"
+
+config WILINK_PLATFORM_DATA
+	bool "TI WiLink platform data"
+	depends on WLCORE_SDIO || WL1251_SDIO
+	default y
+	---help---
+	Small platform data bit needed to pass data to the sdio modules.
+
+
 endif # WL_TI

drivers/net/wireless/ti/Makefile

@@ -1,5 +1,7 @@
 obj-$(CONFIG_WLCORE)			+= wlcore/
 obj-$(CONFIG_WL12XX)			+= wl12xx/
-obj-$(CONFIG_WL12XX_PLATFORM_DATA)	+= wlcore/
 obj-$(CONFIG_WL1251)			+= wl1251/
 obj-$(CONFIG_WL18XX)			+= wl18xx/
+
+# small builtin driver bit
+obj-$(CONFIG_WILINK_PLATFORM_DATA)	+= wilink_platform_data.o

drivers/net/wireless/ti/wl12xx/main.c

@@ -1703,7 +1703,8 @@ static struct ieee80211_sta_ht_cap wl12xx_ht_cap = {
 static int wl12xx_setup(struct wl1271 *wl)
 {
 	struct wl12xx_priv *priv = wl->priv;
-	struct wl12xx_platform_data *pdata = wl->pdev->dev.platform_data;
+	struct wlcore_platdev_data *pdev_data = wl->pdev->dev.platform_data;
+	struct wl12xx_platform_data *pdata = pdev_data->pdata;
 
 	wl->rtable = wl12xx_rtable;
 	wl->num_tx_desc = WL12XX_NUM_TX_DESCRIPTORS;

drivers/net/wireless/ti/wl18xx/conf.h

@@ -23,7 +23,7 @@
 #define __WL18XX_CONF_H__
 
 #define WL18XX_CONF_MAGIC	0x10e100ca
-#define WL18XX_CONF_VERSION	(WLCORE_CONF_VERSION | 0x0005)
+#define WL18XX_CONF_VERSION	(WLCORE_CONF_VERSION | 0x0006)
 #define WL18XX_CONF_MASK	0x0000ffff
 #define WL18XX_CONF_SIZE	(WLCORE_CONF_SIZE + \
 				 sizeof(struct wl18xx_priv_conf))
@@ -70,8 +70,9 @@ struct wl18xx_mac_and_phy_params {
 	u8 pwr_limit_reference_11_abg;
 	u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P];
 	u8 pwr_limit_reference_11p;
-	u8 spare1[9];
-	u8 spare2[9];
+	u8 spare1;
+	u8 per_chan_bo_mode_11_abg[13];
+	u8 per_chan_bo_mode_11_p[4];
 	u8 primary_clock_setting_time;
 	u8 clock_valid_on_wake_up;
 	u8 secondary_clock_setting_time;

drivers/net/wireless/ti/wl18xx/main.c

@@ -547,6 +547,11 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = {
 			0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 			0xff, 0xff, 0xff, 0xff, 0xff, 0xff },
 		.pwr_limit_reference_11p	= 0x64,
+		.per_chan_bo_mode_11_abg	= { 0x00, 0x00, 0x00, 0x00,
+						    0x00, 0x00, 0x00, 0x00,
+						    0x00, 0x00, 0x00, 0x00,
+						    0x00 },
+		.per_chan_bo_mode_11_p		= { 0x00, 0x00, 0x00, 0x00 },
 		.per_chan_pwr_limit_arr_11p	= { 0xff, 0xff, 0xff, 0xff,
 						    0xff, 0xff, 0xff },
 		.psat				= 0,

drivers/net/wireless/ti/wlcore/Kconfig

@@ -33,8 +33,3 @@ config WLCORE_SDIO
 
 	  If you choose to build a module, it'll be called wlcore_sdio.
 	  Say N if unsure.
-
-config WL12XX_PLATFORM_DATA
-	bool
-	depends on WLCORE_SDIO != n || WL1251_SDIO != n
-	default y

drivers/net/wireless/ti/wlcore/Makefile

@@ -9,7 +9,4 @@ obj-$(CONFIG_WLCORE)			+= wlcore.o
 obj-$(CONFIG_WLCORE_SPI)		+= wlcore_spi.o
 obj-$(CONFIG_WLCORE_SDIO)		+= wlcore_sdio.o
 
-# small builtin driver bit
-obj-$(CONFIG_WL12XX_PLATFORM_DATA)	+= wl12xx_platform_data.o
-
 ccflags-y += -D__CHECK_ENDIAN__

drivers/net/wireless/ti/wlcore/boot.c

@@ -84,8 +84,8 @@ out:
 static int wlcore_validate_fw_ver(struct wl1271 *wl)
 {
 	unsigned int *fw_ver = wl->chip.fw_ver;
-	unsigned int *min_ver = (wl->fw_type == WL12XX_FW_TYPE_NORMAL) ?
-		wl->min_sr_fw_ver : wl->min_mr_fw_ver;
+	unsigned int *min_ver = (wl->fw_type == WL12XX_FW_TYPE_MULTI) ?
+		wl->min_mr_fw_ver : wl->min_sr_fw_ver;
 	char min_fw_str[32] = "";
 	int i;
 

drivers/net/wireless/ti/wlcore/cmd.c

@@ -510,10 +510,12 @@ int wl12xx_cmd_role_start_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif)
 	cmd->sta.hlid = wlvif->sta.hlid;
 	cmd->sta.session = wl->session_ids[wlvif->sta.hlid];
 	/*
-	 * We don't have the correct remote rates in this stage. the rates
-	 * will be reconfigured later, after authorization.
+	 * We don't have the correct remote rates in this stage.  The
+	 * rates will be reconfigured later, after association, if the
+	 * firmware supports ACX_PEER_CAP.  Otherwise, there's nothing
+	 * we can do, so use all supported_rates here.
 	 */
-	cmd->sta.remote_rates = cpu_to_le32(wlvif->rate_set);
+	cmd->sta.remote_rates = cpu_to_le32(supported_rates);
 
 	wl1271_debug(DEBUG_CMD, "role start: roleid=%d, hlid=%d, session=%d "
 		     "basic_rate_set: 0x%x, remote_rates: 0x%x",

drivers/net/wireless/ti/wlcore/main.c

@@ -2162,7 +2162,7 @@ static int wl12xx_init_vif_data(struct wl1271 *wl, struct ieee80211_vif *vif)
 	return 0;
 }
 
-static bool wl12xx_init_fw(struct wl1271 *wl)
+static int wl12xx_init_fw(struct wl1271 *wl)
 {
 	int retries = WL1271_BOOT_RETRIES;
 	bool booted = false;
@@ -2228,7 +2228,7 @@ power_off:
 
 	wl->state = WLCORE_STATE_ON;
 out:
-	return booted;
+	return ret;
 }
 
 static bool wl12xx_dev_role_started(struct wl12xx_vif *wlvif)
@@ -2371,7 +2371,6 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw,
 	struct vif_counter_data vif_count;
 	int ret = 0;
 	u8 role_type;
-	bool booted = false;
 
 	vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER |
 			     IEEE80211_VIF_SUPPORTS_CQM_RSSI;
@@ -2432,11 +2431,9 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw,
 		 */
 		memcpy(wl->addresses[0].addr, vif->addr, ETH_ALEN);
 
-		booted = wl12xx_init_fw(wl);
-		if (!booted) {
-			ret = -EINVAL;
+		ret = wl12xx_init_fw(wl);
+		if (ret < 0)
 			goto out;
-		}
 	}
 
 	ret = wl12xx_cmd_role_enable(wl, vif->addr,
@@ -5966,7 +5963,8 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context)
 {
 	struct wl1271 *wl = context;
 	struct platform_device *pdev = wl->pdev;
-	struct wl12xx_platform_data *pdata = pdev->dev.platform_data;
+	struct wlcore_platdev_data *pdev_data = pdev->dev.platform_data;
+	struct wl12xx_platform_data *pdata = pdev_data->pdata;
 	unsigned long irqflags;
 	int ret;
 
@@ -5995,8 +5993,7 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context)
 
 	wl->irq = platform_get_irq(pdev, 0);
 	wl->platform_quirks = pdata->platform_quirks;
-	wl->set_power = pdata->set_power;
-	wl->if_ops = pdata->ops;
+	wl->if_ops = pdev_data->if_ops;
 
 	if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
 		irqflags = IRQF_TRIGGER_RISING;

drivers/net/wireless/ti/wlcore/sdio.c

@@ -217,7 +217,7 @@ static struct wl1271_if_operations sdio_ops = {
 static int wl1271_probe(struct sdio_func *func,
 				  const struct sdio_device_id *id)
 {
-	struct wl12xx_platform_data *wlan_data;
+	struct wlcore_platdev_data *pdev_data;
 	struct wl12xx_sdio_glue *glue;
 	struct resource res[1];
 	mmc_pm_flag_t mmcflags;
@@ -228,10 +228,18 @@ static int wl1271_probe(struct sdio_func *func,
 	if (func->num != 0x02)
 		return -ENODEV;
 
+	pdev_data = kzalloc(sizeof(*pdev_data), GFP_KERNEL);
+	if (!pdev_data) {
+		dev_err(&func->dev, "can't allocate platdev_data\n");
+		goto out;
+	}
+
+	pdev_data->if_ops = &sdio_ops;
+
 	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
 	if (!glue) {
 		dev_err(&func->dev, "can't allocate glue\n");
-		goto out;
+		goto out_free_pdev_data;
 	}
 
 	glue->dev = &func->dev;
@@ -242,9 +250,9 @@ static int wl1271_probe(struct sdio_func *func,
 	/* Use block mode for transferring over one block size of data */
 	func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
 
-	wlan_data = wl12xx_get_platform_data();
-	if (IS_ERR(wlan_data)) {
-		ret = PTR_ERR(wlan_data);
+	pdev_data->pdata = wl12xx_get_platform_data();
+	if (IS_ERR(pdev_data->pdata)) {
+		ret = PTR_ERR(pdev_data->pdata);
 		dev_err(glue->dev, "missing wlan platform data: %d\n", ret);
 		goto out_free_glue;
 	}
@@ -254,9 +262,7 @@ static int wl1271_probe(struct sdio_func *func,
 	dev_dbg(glue->dev, "sdio PM caps = 0x%x\n", mmcflags);
 
 	if (mmcflags & MMC_PM_KEEP_POWER)
-		wlan_data->pwr_in_suspend = true;
-
-	wlan_data->ops = &sdio_ops;
+		pdev_data->pdata->pwr_in_suspend = true;
 
 	sdio_set_drvdata(func, glue);
 
@@ -274,7 +280,7 @@ static int wl1271_probe(struct sdio_func *func,
 	else
 		chip_family = "wl12xx";
 
-	glue->core = platform_device_alloc(chip_family, -1);
+	glue->core = platform_device_alloc(chip_family, PLATFORM_DEVID_AUTO);
 	if (!glue->core) {
 		dev_err(glue->dev, "can't allocate platform_device");
 		ret = -ENOMEM;
@@ -285,7 +291,7 @@ static int wl1271_probe(struct sdio_func *func,
 
 	memset(res, 0x00, sizeof(res));
 
-	res[0].start = wlan_data->irq;
+	res[0].start = pdev_data->pdata->irq;
 	res[0].flags = IORESOURCE_IRQ;
 	res[0].name = "irq";
 
@@ -295,8 +301,8 @@ static int wl1271_probe(struct sdio_func *func,
 		goto out_dev_put;
 	}
 
-	ret = platform_device_add_data(glue->core, wlan_data,
-				       sizeof(*wlan_data));
+	ret = platform_device_add_data(glue->core, pdev_data,
+				       sizeof(*pdev_data));
 	if (ret) {
 		dev_err(glue->dev, "can't add platform data\n");
 		goto out_dev_put;
@@ -315,6 +321,9 @@ out_dev_put:
 out_free_glue:
 	kfree(glue);
 
+out_free_pdev_data:
+	kfree(pdev_data);
+
 out:
 	return ret;
 }

drivers/net/wireless/ti/wlcore/spi.c

@@ -327,22 +327,29 @@ static struct wl1271_if_operations spi_ops = {
 static int wl1271_probe(struct spi_device *spi)
 {
 	struct wl12xx_spi_glue *glue;
-	struct wl12xx_platform_data *pdata;
+	struct wlcore_platdev_data *pdev_data;
 	struct resource res[1];
 	int ret = -ENOMEM;
 
-	pdata = spi->dev.platform_data;
-	if (!pdata) {
+	pdev_data = kzalloc(sizeof(*pdev_data), GFP_KERNEL);
+	if (!pdev_data) {
+		dev_err(&spi->dev, "can't allocate platdev_data\n");
+		goto out;
+	}
+
+	pdev_data->pdata = spi->dev.platform_data;
+	if (!pdev_data->pdata) {
 		dev_err(&spi->dev, "no platform data\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto out_free_pdev_data;
 	}
 
-	pdata->ops = &spi_ops;
+	pdev_data->if_ops = &spi_ops;
 
 	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
 	if (!glue) {
 		dev_err(&spi->dev, "can't allocate glue\n");
-		goto out;
+		goto out_free_pdev_data;
 	}
 
 	glue->dev = &spi->dev;
@@ -359,7 +366,7 @@ static int wl1271_probe(struct spi_device *spi)
 		goto out_free_glue;
 	}
 
-	glue->core = platform_device_alloc("wl12xx", -1);
+	glue->core = platform_device_alloc("wl12xx", PLATFORM_DEVID_AUTO);
 	if (!glue->core) {
 		dev_err(glue->dev, "can't allocate platform_device\n");
 		ret = -ENOMEM;
@@ -380,7 +387,8 @@ static int wl1271_probe(struct spi_device *spi)
 		goto out_dev_put;
 	}
 
-	ret = platform_device_add_data(glue->core, pdata, sizeof(*pdata));
+	ret = platform_device_add_data(glue->core, pdev_data,
+				       sizeof(*pdev_data));
 	if (ret) {
 		dev_err(glue->dev, "can't add platform data\n");
 		goto out_dev_put;
@@ -399,6 +407,10 @@ out_dev_put:
 
 out_free_glue:
 	kfree(glue);
+
+out_free_pdev_data:
+	kfree(pdev_data);
+
 out:
 	return ret;
 }

drivers/net/wireless/ti/wlcore/wlcore.h

@@ -183,7 +183,6 @@ struct wl1271 {
 
 	struct wl1271_if_operations *if_ops;
 
-	void (*set_power)(bool enable);
 	int irq;
 
 	spinlock_t wl_lock;

drivers/net/wireless/ti/wlcore/wlcore_i.h

@@ -206,6 +206,11 @@ struct wl1271_if_operations {
 	void (*set_block_size) (struct device *child, unsigned int blksz);
 };
 
+struct wlcore_platdev_data {
+	struct wl12xx_platform_data *pdata;
+	struct wl1271_if_operations *if_ops;
+};
+
 #define MAX_NUM_KEYS 14
 #define MAX_KEY_SIZE 32
 

include/linux/wl12xx.h

@@ -24,6 +24,8 @@
 #ifndef _LINUX_WL12XX_H
 #define _LINUX_WL12XX_H
 
+#include <linux/err.h>
+
 /* Reference clock values */
 enum {
 	WL12XX_REFCLOCK_19	= 0, /* 19.2 MHz */
@@ -55,17 +57,17 @@ struct wl12xx_platform_data {
 	int board_tcxo_clock;
 	unsigned long platform_quirks;
 	bool pwr_in_suspend;
-
-	struct wl1271_if_operations *ops;
 };
 
 /* Platform does not support level trigger interrupts */
 #define WL12XX_PLATFORM_QUIRK_EDGE_IRQ	BIT(0)
 
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_WILINK_PLATFORM_DATA
 
 int wl12xx_set_platform_data(const struct wl12xx_platform_data *data);
 
+struct wl12xx_platform_data *wl12xx_get_platform_data(void);
+
 #else
 
 static inline
@@ -74,8 +76,12 @@ int wl12xx_set_platform_data(const struct wl12xx_platform_data *data)
 	return -ENOSYS;
 }
 
-#endif
+static inline
+struct wl12xx_platform_data *wl12xx_get_platform_data(void)
+{
+	return ERR_PTR(-ENODATA);
+}
 
-struct wl12xx_platform_data *wl12xx_get_platform_data(void);
+#endif
 
 #endif