Merge remote-tracking branch 'pfdo/drm-fixes' into drm-core-next

-next reported a messy merge, so I've merged my upstream pull into
my -next tree.

Conflicts:
	drivers/gpu/drm/vmwgfx/vmwgfx_kms.c

MAINTAINERS

@@ -3101,6 +3101,7 @@ F:	include/linux/hid*
 
 HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS
 M:	Thomas Gleixner <tglx@linutronix.de>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
 S:	Maintained
 F:	Documentation/timers/
 F:	kernel/hrtimer.c
@@ -3610,7 +3611,7 @@ F:	net/irda/
 IRQ SUBSYSTEM
 M:	Thomas Gleixner <tglx@linutronix.de>
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git irq/core
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
 F:	kernel/irq/
 
 ISAPNP
@@ -4098,7 +4099,7 @@ F:	drivers/hwmon/lm90.c
 LOCKDEP AND LOCKSTAT
 M:	Peter Zijlstra <peterz@infradead.org>
 M:	Ingo Molnar <mingo@redhat.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git core/locking
 S:	Maintained
 F:	Documentation/lockdep*.txt
 F:	Documentation/lockstat.txt
@@ -5086,6 +5087,7 @@ M:	Peter Zijlstra <a.p.zijlstra@chello.nl>
 M:	Paul Mackerras <paulus@samba.org>
 M:	Ingo Molnar <mingo@elte.hu>
 M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
 S:	Supported
 F:	kernel/events/*
 F:	include/linux/perf_event.h
@@ -5165,6 +5167,7 @@ F:	drivers/scsi/pm8001/
 
 POSIX CLOCKS and TIMERS
 M:	Thomas Gleixner <tglx@linutronix.de>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
 S:	Supported
 F:	fs/timerfd.c
 F:	include/linux/timer*
@@ -5680,6 +5683,7 @@ F:	drivers/dma/dw_dmac.c
 TIMEKEEPING, NTP
 M:	John Stultz <johnstul@us.ibm.com>
 M:	Thomas Gleixner <tglx@linutronix.de>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
 S:	Supported
 F:	include/linux/clocksource.h
 F:	include/linux/time.h
@@ -5704,6 +5708,7 @@ F:	drivers/watchdog/sc1200wdt.c
 SCHEDULER
 M:	Ingo Molnar <mingo@elte.hu>
 M:	Peter Zijlstra <peterz@infradead.org>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core
 S:	Maintained
 F:	kernel/sched*
 F:	include/linux/sched.h
@@ -6631,7 +6636,7 @@ TRACING
 M:	Steven Rostedt <rostedt@goodmis.org>
 M:	Frederic Weisbecker <fweisbec@gmail.com>
 M:	Ingo Molnar <mingo@redhat.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git perf/core
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
 S:	Maintained
 F:	Documentation/trace/ftrace.txt
 F:	arch/*/*/*/ftrace.h
@@ -7381,7 +7386,7 @@ M:	Thomas Gleixner <tglx@linutronix.de>
 M:	Ingo Molnar <mingo@redhat.com>
 M:	"H. Peter Anvin" <hpa@zytor.com>
 M:	x86@kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/core
 S:	Maintained
 F:	Documentation/x86/
 F:	arch/x86/

drivers/gpu/drm/vmwgfx/vmwgfx_drv.h

@@ -390,6 +390,11 @@ extern int vmw_context_check(struct vmw_private *dev_priv,
 			     struct ttm_object_file *tfile,
 			     int id,
 			     struct vmw_resource **p_res);
+extern int vmw_user_lookup_handle(struct vmw_private *dev_priv,
+				  struct ttm_object_file *tfile,
+				  uint32_t handle,
+				  struct vmw_surface **out_surf,
+				  struct vmw_dma_buffer **out_buf);
 extern void vmw_surface_res_free(struct vmw_resource *res);
 extern int vmw_surface_init(struct vmw_private *dev_priv,
 			    struct vmw_surface *srf,

drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c

@@ -33,6 +33,7 @@ bool vmw_fifo_have_3d(struct vmw_private *dev_priv)
 {
 	__le32 __iomem *fifo_mem = dev_priv->mmio_virt;
 	uint32_t fifo_min, hwversion;
+	const struct vmw_fifo_state *fifo = &dev_priv->fifo;
 
 	if (!(dev_priv->capabilities & SVGA_CAP_EXTENDED_FIFO))
 		return false;
@@ -41,7 +42,12 @@ bool vmw_fifo_have_3d(struct vmw_private *dev_priv)
 	if (fifo_min <= SVGA_FIFO_3D_HWVERSION * sizeof(unsigned int))
 		return false;
 
-	hwversion = ioread32(fifo_mem + SVGA_FIFO_3D_HWVERSION);
+	hwversion = ioread32(fifo_mem +
+			     ((fifo->capabilities &
+			       SVGA_FIFO_CAP_3D_HWVERSION_REVISED) ?
+			      SVGA_FIFO_3D_HWVERSION_REVISED :
+			      SVGA_FIFO_3D_HWVERSION));
+
 	if (hwversion == 0)
 		return false;
 

drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c

@@ -58,8 +58,14 @@ int vmw_getparam_ioctl(struct drm_device *dev, void *data,
 	case DRM_VMW_PARAM_FIFO_HW_VERSION:
 	{
 		__le32 __iomem *fifo_mem = dev_priv->mmio_virt;
-
-		param->value = ioread32(fifo_mem + SVGA_FIFO_3D_HWVERSION);
+		const struct vmw_fifo_state *fifo = &dev_priv->fifo;
+
+		param->value =
+			ioread32(fifo_mem +
+				 ((fifo->capabilities &
+				   SVGA_FIFO_CAP_3D_HWVERSION_REVISED) ?
+				  SVGA_FIFO_3D_HWVERSION_REVISED :
+				  SVGA_FIFO_3D_HWVERSION));
 		break;
 	}
 	default:
@@ -166,13 +172,7 @@ int vmw_present_ioctl(struct drm_device *dev, void *data,
 		ret = -EINVAL;
 		goto out_no_fb;
 	}
-
 	vfb = vmw_framebuffer_to_vfb(obj_to_fb(obj));
-	if (!vfb->dmabuf) {
-		DRM_ERROR("Framebuffer not dmabuf backed.\n");
-		ret = -EINVAL;
-		goto out_no_fb;
-	}
 
 	ret = ttm_read_lock(&vmaster->lock, true);
 	if (unlikely(ret != 0))

drivers/gpu/drm/vmwgfx/vmwgfx_kms.c

@@ -31,6 +31,44 @@
 /* Might need a hrtimer here? */
 #define VMWGFX_PRESENT_RATE ((HZ / 60 > 0) ? HZ / 60 : 1)
 
+
+struct vmw_clip_rect {
+	int x1, x2, y1, y2;
+};
+
+/**
+ * Clip @num_rects number of @rects against @clip storing the
+ * results in @out_rects and the number of passed rects in @out_num.
+ */
+void vmw_clip_cliprects(struct drm_clip_rect *rects,
+			int num_rects,
+			struct vmw_clip_rect clip,
+			SVGASignedRect *out_rects,
+			int *out_num)
+{
+	int i, k;
+
+	for (i = 0, k = 0; i < num_rects; i++) {
+		int x1 = max_t(int, clip.x1, rects[i].x1);
+		int y1 = max_t(int, clip.y1, rects[i].y1);
+		int x2 = min_t(int, clip.x2, rects[i].x2);
+		int y2 = min_t(int, clip.y2, rects[i].y2);
+
+		if (x1 >= x2)
+			continue;
+		if (y1 >= y2)
+			continue;
+
+		out_rects[k].left   = x1;
+		out_rects[k].top    = y1;
+		out_rects[k].right  = x2;
+		out_rects[k].bottom = y2;
+		k++;
+	}
+
+	*out_num = k;
+}
+
 void vmw_display_unit_cleanup(struct vmw_display_unit *du)
 {
 	if (du->cursor_surface)
@@ -82,6 +120,43 @@ int vmw_cursor_update_image(struct vmw_private *dev_priv,
 	return 0;
 }
 
+int vmw_cursor_update_dmabuf(struct vmw_private *dev_priv,
+			     struct vmw_dma_buffer *dmabuf,
+			     u32 width, u32 height,
+			     u32 hotspotX, u32 hotspotY)
+{
+	struct ttm_bo_kmap_obj map;
+	unsigned long kmap_offset;
+	unsigned long kmap_num;
+	void *virtual;
+	bool dummy;
+	int ret;
+
+	kmap_offset = 0;
+	kmap_num = (width*height*4 + PAGE_SIZE - 1) >> PAGE_SHIFT;
+
+	ret = ttm_bo_reserve(&dmabuf->base, true, false, false, 0);
+	if (unlikely(ret != 0)) {
+		DRM_ERROR("reserve failed\n");
+		return -EINVAL;
+	}
+
+	ret = ttm_bo_kmap(&dmabuf->base, kmap_offset, kmap_num, &map);
+	if (unlikely(ret != 0))
+		goto err_unreserve;
+
+	virtual = ttm_kmap_obj_virtual(&map, &dummy);
+	ret = vmw_cursor_update_image(dev_priv, virtual, width, height,
+				      hotspotX, hotspotY);
+
+	ttm_bo_kunmap(&map);
+err_unreserve:
+	ttm_bo_unreserve(&dmabuf->base);
+
+	return ret;
+}
+
+
 void vmw_cursor_update_position(struct vmw_private *dev_priv,
 				bool show, int x, int y)
 {
@@ -110,24 +185,21 @@ int vmw_du_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv,
 		return -EINVAL;
 
 	if (handle) {
-		ret = vmw_user_surface_lookup_handle(dev_priv, tfile,
-						     handle, &surface);
-		if (!ret) {
-			if (!surface->snooper.image) {
-				DRM_ERROR("surface not suitable for cursor\n");
-				vmw_surface_unreference(&surface);
-				return -EINVAL;
-			}
-		} else {
-			ret = vmw_user_dmabuf_lookup(tfile,
-						     handle, &dmabuf);
-			if (ret) {
-				DRM_ERROR("failed to find surface or dmabuf: %i\n", ret);
-				return -EINVAL;
-			}
+		ret = vmw_user_lookup_handle(dev_priv, tfile,
+					     handle, &surface, &dmabuf);
+		if (ret) {
+			DRM_ERROR("failed to find surface or dmabuf: %i\n", ret);
+			return -EINVAL;
 		}
 	}
 
+	/* need to do this before taking down old image */
+	if (surface && !surface->snooper.image) {
+		DRM_ERROR("surface not suitable for cursor\n");
+		vmw_surface_unreference(&surface);
+		return -EINVAL;
+	}
+
 	/* takedown old cursor */
 	if (du->cursor_surface) {
 		du->cursor_surface->snooper.crtc = NULL;
@@ -146,36 +218,11 @@ int vmw_du_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv,
 		vmw_cursor_update_image(dev_priv, surface->snooper.image,
 					64, 64, du->hotspot_x, du->hotspot_y);
 	} else if (dmabuf) {
-		struct ttm_bo_kmap_obj map;
-		unsigned long kmap_offset;
-		unsigned long kmap_num;
-		void *virtual;
-		bool dummy;
-
 		/* vmw_user_surface_lookup takes one reference */
 		du->cursor_dmabuf = dmabuf;
 
-		kmap_offset = 0;
-		kmap_num = (64*64*4) >> PAGE_SHIFT;
-
-		ret = ttm_bo_reserve(&dmabuf->base, true, false, false, 0);
-		if (unlikely(ret != 0)) {
-			DRM_ERROR("reserve failed\n");
-			return -EINVAL;
-		}
-
-		ret = ttm_bo_kmap(&dmabuf->base, kmap_offset, kmap_num, &map);
-		if (unlikely(ret != 0))
-			goto err_unreserve;
-
-		virtual = ttm_kmap_obj_virtual(&map, &dummy);
-		vmw_cursor_update_image(dev_priv, virtual, 64, 64,
-					du->hotspot_x, du->hotspot_y);
-
-		ttm_bo_kunmap(&map);
-err_unreserve:
-		ttm_bo_unreserve(&dmabuf->base);
-
+		ret = vmw_cursor_update_dmabuf(dev_priv, dmabuf, width, height,
+					       du->hotspot_x, du->hotspot_y);
 	} else {
 		vmw_cursor_update_position(dev_priv, false, 0, 0);
 		return 0;
@@ -377,8 +424,9 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv,
 				struct drm_clip_rect *clips,
 				unsigned num_clips, int inc)
 {
-	struct drm_clip_rect *clips_ptr;
 	struct vmw_display_unit *units[VMWGFX_NUM_DISPLAY_UNITS];
+	struct drm_clip_rect *clips_ptr;
+	struct drm_clip_rect *tmp;
 	struct drm_crtc *crtc;
 	size_t fifo_size;
 	int i, num_units;
@@ -391,7 +439,6 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv,
 	} *cmd;
 	SVGASignedRect *blits;
 
-
 	num_units = 0;
 	list_for_each_entry(crtc, &dev_priv->dev->mode_config.crtc_list,
 			    head) {
@@ -402,13 +449,24 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv,
 
 	BUG_ON(!clips || !num_clips);
 
+	tmp = kzalloc(sizeof(*tmp) * num_clips, GFP_KERNEL);
+	if (unlikely(tmp == NULL)) {
+		DRM_ERROR("Temporary cliprect memory alloc failed.\n");
+		return -ENOMEM;
+	}
+
 	fifo_size = sizeof(*cmd) + sizeof(SVGASignedRect) * num_clips;
 	cmd = kzalloc(fifo_size, GFP_KERNEL);
 	if (unlikely(cmd == NULL)) {
 		DRM_ERROR("Temporary fifo memory alloc failed.\n");
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto out_free_tmp;
 	}
 
+	/* setup blits pointer */
+	blits = (SVGASignedRect *)&cmd[1];
+
+	/* initial clip region */
 	left = clips->x1;
 	right = clips->x2;
 	top = clips->y1;
@@ -434,45 +492,60 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv,
 	cmd->body.srcRect.bottom = bottom;
 
 	clips_ptr = clips;
-	blits = (SVGASignedRect *)&cmd[1];
 	for (i = 0; i < num_clips; i++, clips_ptr += inc) {
-		blits[i].left   = clips_ptr->x1 - left;
-		blits[i].right  = clips_ptr->x2 - left;
-		blits[i].top    = clips_ptr->y1 - top;
-		blits[i].bottom = clips_ptr->y2 - top;
+		tmp[i].x1 = clips_ptr->x1 - left;
+		tmp[i].x2 = clips_ptr->x2 - left;
+		tmp[i].y1 = clips_ptr->y1 - top;
+		tmp[i].y2 = clips_ptr->y2 - top;
 	}
 
 	/* do per unit writing, reuse fifo for each */
 	for (i = 0; i < num_units; i++) {
 		struct vmw_display_unit *unit = units[i];
-		int clip_x1 = left - unit->crtc.x;
-		int clip_y1 = top - unit->crtc.y;
-		int clip_x2 = right - unit->crtc.x;
-		int clip_y2 = bottom - unit->crtc.y;
+		struct vmw_clip_rect clip;
+		int num;
+
+		clip.x1 = left - unit->crtc.x;
+		clip.y1 = top - unit->crtc.y;
+		clip.x2 = right - unit->crtc.x;
+		clip.y2 = bottom - unit->crtc.y;
 
 		/* skip any crtcs that misses the clip region */
-		if (clip_x1 >= unit->crtc.mode.hdisplay ||
-		    clip_y1 >= unit->crtc.mode.vdisplay ||
-		    clip_x2 <= 0 || clip_y2 <= 0)
+		if (clip.x1 >= unit->crtc.mode.hdisplay ||
+		    clip.y1 >= unit->crtc.mode.vdisplay ||
+		    clip.x2 <= 0 || clip.y2 <= 0)
 			continue;
 
+		/*
+		 * In order for the clip rects to be correctly scaled
+		 * the src and dest rects needs to be the same size.
+		 */
+		cmd->body.destRect.left = clip.x1;
+		cmd->body.destRect.right = clip.x2;
+		cmd->body.destRect.top = clip.y1;
+		cmd->body.destRect.bottom = clip.y2;
+
+		/* create a clip rect of the crtc in dest coords */
+		clip.x2 = unit->crtc.mode.hdisplay - clip.x1;
+		clip.y2 = unit->crtc.mode.vdisplay - clip.y1;
+		clip.x1 = 0 - clip.x1;
+		clip.y1 = 0 - clip.y1;
+
 		/* need to reset sid as it is changed by execbuf */
 		cmd->body.srcImage.sid = cpu_to_le32(framebuffer->user_handle);
-
 		cmd->body.destScreenId = unit->unit;
 
-		/*
-		 * The blit command is a lot more resilient then the
-		 * readback command when it comes to clip rects. So its
-		 * okay to go out of bounds.
-		 */
+		/* clip and write blits to cmd stream */
+		vmw_clip_cliprects(tmp, num_clips, clip, blits, &num);
 
-		cmd->body.destRect.left = clip_x1;
-		cmd->body.destRect.right = clip_x2;
-		cmd->body.destRect.top = clip_y1;
-		cmd->body.destRect.bottom = clip_y2;
+		/* if no cliprects hit skip this */
+		if (num == 0)
+			continue;
 
 
+		/* recalculate package length */
+		fifo_size = sizeof(*cmd) + sizeof(SVGASignedRect) * num;
+		cmd->header.size = cpu_to_le32(fifo_size - sizeof(cmd->header));
 		ret = vmw_execbuf_process(file_priv, dev_priv, NULL, cmd,
 					  fifo_size, 0, NULL);
 
@@ -480,7 +553,10 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv,
 			break;
 	}
 
+
 	kfree(cmd);
+out_free_tmp:
+	kfree(tmp);
 
 	return ret;
 }
@@ -556,6 +632,10 @@ static int vmw_kms_new_framebuffer_surface(struct vmw_private *dev_priv,
 	 * Sanity checks.
 	 */
 
+	/* Surface must be marked as a scanout. */
+	if (unlikely(!surface->scanout))
+		return -EINVAL;
+
 	if (unlikely(surface->mip_levels[0] != 1 ||
 		     surface->num_sizes != 1 ||
 		     surface->sizes[0].width < mode_cmd->width ||
@@ -782,6 +862,7 @@ static int do_dmabuf_dirty_sou(struct drm_file *file_priv,
 			int clip_y1 = clips_ptr->y1 - unit->crtc.y;
 			int clip_x2 = clips_ptr->x2 - unit->crtc.x;
 			int clip_y2 = clips_ptr->y2 - unit->crtc.y;
+			int move_x, move_y;
 
 			/* skip any crtcs that misses the clip region */
 			if (clip_x1 >= unit->crtc.mode.hdisplay ||
@@ -789,12 +870,21 @@ static int do_dmabuf_dirty_sou(struct drm_file *file_priv,
 			    clip_x2 <= 0 || clip_y2 <= 0)
 				continue;
 
+			/* clip size to crtc size */
+			clip_x2 = min_t(int, clip_x2, unit->crtc.mode.hdisplay);
+			clip_y2 = min_t(int, clip_y2, unit->crtc.mode.vdisplay);
+
+			/* translate both src and dest to bring clip into screen */
+			move_x = min_t(int, clip_x1, 0);
+			move_y = min_t(int, clip_y1, 0);
+
+			/* actual translate done here */
 			blits[hit_num].header = SVGA_CMD_BLIT_GMRFB_TO_SCREEN;
 			blits[hit_num].body.destScreenId = unit->unit;
-			blits[hit_num].body.srcOrigin.x = clips_ptr->x1;
-			blits[hit_num].body.srcOrigin.y = clips_ptr->y1;
-			blits[hit_num].body.destRect.left = clip_x1;
-			blits[hit_num].body.destRect.top = clip_y1;
+			blits[hit_num].body.srcOrigin.x = clips_ptr->x1 - move_x;
+			blits[hit_num].body.srcOrigin.y = clips_ptr->y1 - move_y;
+			blits[hit_num].body.destRect.left = clip_x1 - move_x;
+			blits[hit_num].body.destRect.top = clip_y1 - move_y;
 			blits[hit_num].body.destRect.right = clip_x2;
 			blits[hit_num].body.destRect.bottom = clip_y2;
 			hit_num++;
@@ -1045,42 +1135,29 @@ static struct drm_framebuffer *vmw_kms_fb_create(struct drm_device *dev,
 	 * End conditioned code.
 	 */
 
-	ret = vmw_user_surface_lookup_handle(dev_priv, tfile,
-					     mode_cmd.handle, &surface);
+	/* returns either a dmabuf or surface */
+	ret = vmw_user_lookup_handle(dev_priv, tfile,
+				     mode_cmd.handle,
+				     &surface, &bo);
 	if (ret)
-		goto try_dmabuf;
-
-	if (!surface->scanout)
-		goto err_not_scanout;
-
-	ret = vmw_kms_new_framebuffer_surface(dev_priv, file_priv, surface,
-					      &vfb, &mode_cmd);
-
-	/* vmw_user_surface_lookup takes one ref so does new_fb */
-	vmw_surface_unreference(&surface);
-
-	if (ret) {
-		DRM_ERROR("failed to create vmw_framebuffer: %i\n", ret);
-		ttm_base_object_unref(&user_obj);
-		return ERR_PTR(ret);
-	} else
-		vfb->user_obj = user_obj;
-	return &vfb->base;
-
-try_dmabuf:
-	DRM_INFO("%s: trying buffer\n", __func__);
-
-	ret = vmw_user_dmabuf_lookup(tfile, mode_cmd.handle, &bo);
-	if (ret) {
-		DRM_ERROR("failed to find buffer: %i\n", ret);
-		return ERR_PTR(-ENOENT);
-	}
-
-	ret = vmw_kms_new_framebuffer_dmabuf(dev_priv, bo, &vfb,
-					     &mode_cmd);
+		goto err_out;
+
+	/* Create the new framebuffer depending one what we got back */
+	if (bo)
+		ret = vmw_kms_new_framebuffer_dmabuf(dev_priv, bo, &vfb,
+						     &mode_cmd);
+	else if (surface)
+		ret = vmw_kms_new_framebuffer_surface(dev_priv, file_priv,
+						      surface, &vfb, &mode_cmd);
+	else
+		BUG();
 
-	/* vmw_user_dmabuf_lookup takes one ref so does new_fb */
-	vmw_dmabuf_unreference(&bo);
+err_out:
+	/* vmw_user_lookup_handle takes one ref so does new_fb */
+	if (bo)
+		vmw_dmabuf_unreference(&bo);
+	if (surface)
+		vmw_surface_unreference(&surface);
 
 	if (ret) {
 		DRM_ERROR("failed to create vmw_framebuffer: %i\n", ret);
@@ -1090,14 +1167,6 @@ try_dmabuf:
 		vfb->user_obj = user_obj;
 
 	return &vfb->base;
-
-err_not_scanout:
-	DRM_ERROR("surface not marked as scanout\n");
-	/* vmw_user_surface_lookup takes one ref */
-	vmw_surface_unreference(&surface);
-	ttm_base_object_unref(&user_obj);
-
-	return ERR_PTR(-EINVAL);
 }
 
 static struct drm_mode_config_funcs vmw_kms_funcs = {
@@ -1114,10 +1183,12 @@ int vmw_kms_present(struct vmw_private *dev_priv,
 		    uint32_t num_clips)
 {
 	struct vmw_display_unit *units[VMWGFX_NUM_DISPLAY_UNITS];
+	struct drm_clip_rect *tmp;
 	struct drm_crtc *crtc;
 	size_t fifo_size;
 	int i, k, num_units;
 	int ret = 0; /* silence warning */
+	int left, right, top, bottom;
 
 	struct {
 		SVGA3dCmdHeader header;
@@ -1135,60 +1206,95 @@ int vmw_kms_present(struct vmw_private *dev_priv,
 	BUG_ON(surface == NULL);
 	BUG_ON(!clips || !num_clips);
 
+	tmp = kzalloc(sizeof(*tmp) * num_clips, GFP_KERNEL);
+	if (unlikely(tmp == NULL)) {
+		DRM_ERROR("Temporary cliprect memory alloc failed.\n");
+		return -ENOMEM;
+	}
+
 	fifo_size = sizeof(*cmd) + sizeof(SVGASignedRect) * num_clips;
 	cmd = kmalloc(fifo_size, GFP_KERNEL);
 	if (unlikely(cmd == NULL)) {
 		DRM_ERROR("Failed to allocate temporary fifo memory.\n");
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto out_free_tmp;
+	}
+
+	left = clips->x;
+	right = clips->x + clips->w;
+	top = clips->y;
+	bottom = clips->y + clips->h;
+
+	for (i = 1; i < num_clips; i++) {
+		left = min_t(int, left, (int)clips[i].x);
+		right = max_t(int, right, (int)clips[i].x + clips[i].w);
+		top = min_t(int, top, (int)clips[i].y);
+		bottom = max_t(int, bottom, (int)clips[i].y + clips[i].h);
 	}
 
 	/* only need to do this once */
 	memset(cmd, 0, fifo_size);
 	cmd->header.id = cpu_to_le32(SVGA_3D_CMD_BLIT_SURFACE_TO_SCREEN);
-	cmd->header.size = cpu_to_le32(fifo_size - sizeof(cmd->header));
-
-	cmd->body.srcRect.left = 0;
-	cmd->body.srcRect.right = surface->sizes[0].width;
-	cmd->body.srcRect.top = 0;
-	cmd->body.srcRect.bottom = surface->sizes[0].height;
 
 	blits = (SVGASignedRect *)&cmd[1];
+
+	cmd->body.srcRect.left = left;
+	cmd->body.srcRect.right = right;
+	cmd->body.srcRect.top = top;
+	cmd->body.srcRect.bottom = bottom;
+
 	for (i = 0; i < num_clips; i++) {
-		blits[i].left   = clips[i].x;
-		blits[i].right  = clips[i].x + clips[i].w;
-		blits[i].top    = clips[i].y;
-		blits[i].bottom = clips[i].y + clips[i].h;
+		tmp[i].x1 = clips[i].x - left;
+		tmp[i].x2 = clips[i].x + clips[i].w - left;
+		tmp[i].y1 = clips[i].y - top;
+		tmp[i].y2 = clips[i].y + clips[i].h - top;
 	}
 
 	for (k = 0; k < num_units; k++) {
 		struct vmw_display_unit *unit = units[k];
-		int clip_x1 = destX - unit->crtc.x;
-		int clip_y1 = destY - unit->crtc.y;
-		int clip_x2 = clip_x1 + surface->sizes[0].width;
-		int clip_y2 = clip_y1 + surface->sizes[0].height;
+		struct vmw_clip_rect clip;
+		int num;
+
+		clip.x1 = left + destX - unit->crtc.x;
+		clip.y1 = top + destY - unit->crtc.y;
+		clip.x2 = right + destX - unit->crtc.x;
+		clip.y2 = bottom + destY - unit->crtc.y;
 
 		/* skip any crtcs that misses the clip region */
-		if (clip_x1 >= unit->crtc.mode.hdisplay ||
-		    clip_y1 >= unit->crtc.mode.vdisplay ||
-		    clip_x2 <= 0 || clip_y2 <= 0)
+		if (clip.x1 >= unit->crtc.mode.hdisplay ||
+		    clip.y1 >= unit->crtc.mode.vdisplay ||
+		    clip.x2 <= 0 || clip.y2 <= 0)
 			continue;
 
+		/*
+		 * In order for the clip rects to be correctly scaled
+		 * the src and dest rects needs to be the same size.
+		 */
+		cmd->body.destRect.left = clip.x1;
+		cmd->body.destRect.right = clip.x2;
+		cmd->body.destRect.top = clip.y1;
+		cmd->body.destRect.bottom = clip.y2;
+
+		/* create a clip rect of the crtc in dest coords */
+		clip.x2 = unit->crtc.mode.hdisplay - clip.x1;
+		clip.y2 = unit->crtc.mode.vdisplay - clip.y1;
+		clip.x1 = 0 - clip.x1;
+		clip.y1 = 0 - clip.y1;
+
 		/* need to reset sid as it is changed by execbuf */
 		cmd->body.srcImage.sid = sid;
-
 		cmd->body.destScreenId = unit->unit;
 
-		/*
-		 * The blit command is a lot more resilient then the
-		 * readback command when it comes to clip rects. So its
-		 * okay to go out of bounds.
-		 */
+		/* clip and write blits to cmd stream */
+		vmw_clip_cliprects(tmp, num_clips, clip, blits, &num);
 
-		cmd->body.destRect.left = clip_x1;
-		cmd->body.destRect.right = clip_x2;
-		cmd->body.destRect.top = clip_y1;
-		cmd->body.destRect.bottom = clip_y2;
+		/* if no cliprects hit skip this */
+		if (num == 0)
+			continue;
 
+		/* recalculate package length */
+		fifo_size = sizeof(*cmd) + sizeof(SVGASignedRect) * num;
+		cmd->header.size = cpu_to_le32(fifo_size - sizeof(cmd->header));
 		ret = vmw_execbuf_process(file_priv, dev_priv, NULL, cmd,
 					  fifo_size, 0, NULL);
 
@@ -1197,6 +1303,8 @@ int vmw_kms_present(struct vmw_private *dev_priv,
 	}
 
 	kfree(cmd);
+out_free_tmp:
+	kfree(tmp);
 
 	return ret;
 }

drivers/gpu/drm/vmwgfx/vmwgfx_kms.h

@@ -63,9 +63,14 @@ struct vmw_framebuffer {
 int vmw_cursor_update_image(struct vmw_private *dev_priv,
 			    u32 *image, u32 width, u32 height,
 			    u32 hotspotX, u32 hotspotY);
+int vmw_cursor_update_dmabuf(struct vmw_private *dev_priv,
+			     struct vmw_dma_buffer *dmabuf,
+			     u32 width, u32 height,
+			     u32 hotspotX, u32 hotspotY);
 void vmw_cursor_update_position(struct vmw_private *dev_priv,
 				bool show, int x, int y);
 
+
 /**
  * Base class display unit.
  *

drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c

@@ -74,9 +74,10 @@ static int vmw_ldu_commit_list(struct vmw_private *dev_priv)
 {
 	struct vmw_legacy_display *lds = dev_priv->ldu_priv;
 	struct vmw_legacy_display_unit *entry;
+	struct vmw_display_unit *du = NULL;
 	struct drm_framebuffer *fb = NULL;
 	struct drm_crtc *crtc = NULL;
-	int i = 0;
+	int i = 0, ret;
 
 	/* If there is no display topology the host just assumes
 	 * that the guest will set the same layout as the host.
@@ -129,6 +130,25 @@ static int vmw_ldu_commit_list(struct vmw_private *dev_priv)
 
 	lds->last_num_active = lds->num_active;
 
+
+	/* Find the first du with a cursor. */
+	list_for_each_entry(entry, &lds->active, active) {
+		du = &entry->base;
+
+		if (!du->cursor_dmabuf)
+			continue;
+
+		ret = vmw_cursor_update_dmabuf(dev_priv,
+					       du->cursor_dmabuf,
+					       64, 64,
+					       du->hotspot_x,
+					       du->hotspot_y);
+		if (ret == 0)
+			break;
+
+		DRM_ERROR("Could not update cursor image\n");
+	}
+
 	return 0;
 }
 

drivers/gpu/drm/vmwgfx/vmwgfx_resource.c

@@ -1190,6 +1190,29 @@ void vmw_resource_unreserve(struct list_head *list)
 		write_unlock(lock);
 }
 
+/**
+ * Helper function that looks either a surface or dmabuf.
+ *
+ * The pointer this pointed at by out_surf and out_buf needs to be null.
+ */
+int vmw_user_lookup_handle(struct vmw_private *dev_priv,
+			   struct ttm_object_file *tfile,
+			   uint32_t handle,
+			   struct vmw_surface **out_surf,
+			   struct vmw_dma_buffer **out_buf)
+{
+	int ret;
+
+	BUG_ON(*out_surf || *out_buf);
+
+	ret = vmw_user_surface_lookup_handle(dev_priv, tfile, handle, out_surf);
+	if (!ret)
+		return 0;
+
+	ret = vmw_user_dmabuf_lookup(tfile, handle, out_buf);
+	return ret;
+}
+
 
 int vmw_user_surface_lookup_handle(struct vmw_private *dev_priv,
 				   struct ttm_object_file *tfile,

drivers/i2c/busses/i2c-eg20t.c

@@ -893,6 +893,13 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev,
 	/* Set the number of I2C channel instance */
 	adap_info->ch_num = id->driver_data;
 
+	ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED,
+		  KBUILD_MODNAME, adap_info);
+	if (ret) {
+		pch_pci_err(pdev, "request_irq FAILED\n");
+		goto err_request_irq;
+	}
+
 	for (i = 0; i < adap_info->ch_num; i++) {
 		pch_adap = &adap_info->pch_data[i].pch_adapter;
 		adap_info->pch_i2c_suspended = false;
@@ -910,28 +917,23 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev,
 
 		pch_adap->dev.parent = &pdev->dev;
 
+		pch_i2c_init(&adap_info->pch_data[i]);
 		ret = i2c_add_adapter(pch_adap);
 		if (ret) {
 			pch_pci_err(pdev, "i2c_add_adapter[ch:%d] FAILED\n", i);
-			goto err_i2c_add_adapter;
+			goto err_add_adapter;
 		}
-
-		pch_i2c_init(&adap_info->pch_data[i]);
-	}
-	ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED,
-		  KBUILD_MODNAME, adap_info);
-	if (ret) {
-		pch_pci_err(pdev, "request_irq FAILED\n");
-		goto err_i2c_add_adapter;
 	}
 
 	pci_set_drvdata(pdev, adap_info);
 	pch_pci_dbg(pdev, "returns %d.\n", ret);
 	return 0;
 
-err_i2c_add_adapter:
+err_add_adapter:
 	for (j = 0; j < i; j++)
 		i2c_del_adapter(&adap_info->pch_data[j].pch_adapter);
+	free_irq(pdev->irq, adap_info);
+err_request_irq:
 	pci_iounmap(pdev, base_addr);
 err_pci_iomap:
 	pci_release_regions(pdev);

drivers/i2c/busses/i2c-omap.c

@@ -1047,13 +1047,14 @@ omap_i2c_probe(struct platform_device *pdev)
 		 * size. This is to ensure that we can handle the status on int
 		 * call back latencies.
 		 */
-		if (dev->rev >= OMAP_I2C_REV_ON_3530_4430) {
-			dev->fifo_size = 0;
+
+		dev->fifo_size = (dev->fifo_size / 2);
+
+		if (dev->rev >= OMAP_I2C_REV_ON_3530_4430)
 			dev->b_hw = 0; /* Disable hardware fixes */
-		} else {
-			dev->fifo_size = (dev->fifo_size / 2);
+		else
 			dev->b_hw = 1; /* Enable hardware fixes */
-		}
+
 		/* calculate wakeup latency constraint for MPU */
 		if (dev->set_mpu_wkup_lat != NULL)
 			dev->latency = (1000000 * dev->fifo_size) /

drivers/i2c/busses/i2c-s3c2410.c

@@ -534,6 +534,7 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
 
 	/* first, try busy waiting briefly */
 	do {
+		cpu_relax();
 		iicstat = readl(i2c->regs + S3C2410_IICSTAT);
 	} while ((iicstat & S3C2410_IICSTAT_START) && --spins);
 
@@ -786,7 +787,7 @@ static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
 #else
 static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
 {
-	return -EINVAL;
+	return 0;
 }
 
 static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)

drivers/pci/ats.c

@@ -13,6 +13,7 @@
 #include <linux/export.h>
 #include <linux/pci-ats.h>
 #include <linux/pci.h>
+#include <linux/slab.h>
 
 #include "pci.h"
 

drivers/pci/hotplug/acpiphp_glue.c

@@ -132,6 +132,18 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
 	if (!acpi_pci_check_ejectable(pbus, handle) && !is_dock_device(handle))
 		return AE_OK;
 
+	pdev = pbus->self;
+	if (pdev && pci_is_pcie(pdev)) {
+		tmp = acpi_find_root_bridge_handle(pdev);
+		if (tmp) {
+			struct acpi_pci_root *root = acpi_pci_find_root(tmp);
+
+			if (root && (root->osc_control_set &
+					OSC_PCI_EXPRESS_NATIVE_HP_CONTROL))
+				return AE_OK;
+		}
+	}
+
 	acpi_evaluate_integer(handle, "_ADR", NULL, &adr);
 	device = (adr >> 16) & 0xffff;
 	function = adr & 0xffff;
@@ -213,7 +225,6 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
 
 	pdev = pci_get_slot(pbus, PCI_DEVFN(device, function));
 	if (pdev) {
-		pdev->current_state = PCI_D0;
 		slot->flags |= (SLOT_ENABLED | SLOT_POWEREDON);
 		pci_dev_put(pdev);
 	}
@@ -459,17 +470,8 @@ static int add_bridge(acpi_handle handle)
 {
 	acpi_status status;
 	unsigned long long tmp;
-	struct acpi_pci_root *root;
 	acpi_handle dummy_handle;
 
-	/*
-	 * We shouldn't use this bridge if PCIe native hotplug control has been
-	 * granted by the BIOS for it.
-	 */
-	root = acpi_pci_find_root(handle);
-	if (root && (root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL))
-		return -ENODEV;
-
 	/* if the bridge doesn't have _STA, we assume it is always there */
 	status = acpi_get_handle(handle, "_STA", &dummy_handle);
 	if (ACPI_SUCCESS(status)) {
@@ -1385,19 +1387,11 @@ static void handle_hotplug_event_func(acpi_handle handle, u32 type,
 static acpi_status
 find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
 {
-	struct acpi_pci_root *root;
 	int *count = (int *)context;
 
 	if (!acpi_is_root_bridge(handle))
 		return AE_OK;
 
-	root = acpi_pci_find_root(handle);
-	if (!root)
-		return AE_OK;
-
-	if (root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL)
-		return AE_OK;
-
 	(*count)++;
 	acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
 				    handle_hotplug_event_bridge, NULL);

drivers/pci/iov.c

@@ -283,6 +283,7 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
 	struct resource *res;
 	struct pci_dev *pdev;
 	struct pci_sriov *iov = dev->sriov;
+	int bars = 0;
 
 	if (!nr_virtfn)
 		return 0;
@@ -307,6 +308,7 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
 
 	nres = 0;
 	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
+		bars |= (1 << (i + PCI_IOV_RESOURCES));
 		res = dev->resource + PCI_IOV_RESOURCES + i;
 		if (res->parent)
 			nres++;
@@ -324,6 +326,11 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
 		return -ENOMEM;
 	}
 
+	if (pci_enable_resources(dev, bars)) {
+		dev_err(&dev->dev, "SR-IOV: IOV BARS not allocated\n");
+		return -ENOMEM;
+	}
+
 	if (iov->link != dev->devfn) {
 		pdev = pci_get_slot(dev->bus, iov->link);
 		if (!pdev)

drivers/pci/pci.c

@@ -664,6 +664,9 @@ static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state)
 		error = platform_pci_set_power_state(dev, state);
 		if (!error)
 			pci_update_current_state(dev, state);
+		/* Fall back to PCI_D0 if native PM is not supported */
+		if (!dev->pm_cap)
+			dev->current_state = PCI_D0;
 	} else {
 		error = -ENODEV;
 		/* Fall back to PCI_D0 if native PM is not supported */
@@ -1126,7 +1129,11 @@ static int __pci_enable_device_flags(struct pci_dev *dev,
 	if (atomic_add_return(1, &dev->enable_cnt) > 1)
 		return 0;		/* already enabled */
 
-	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
+	/* only skip sriov related */
+	for (i = 0; i <= PCI_ROM_RESOURCE; i++)
+		if (dev->resource[i].flags & flags)
+			bars |= (1 << i);
+	for (i = PCI_BRIDGE_RESOURCES; i < DEVICE_COUNT_RESOURCE; i++)
 		if (dev->resource[i].flags & flags)
 			bars |= (1 << i);
 

drivers/s390/scsi/zfcp_scsi.c

@@ -55,6 +55,10 @@ static void zfcp_scsi_slave_destroy(struct scsi_device *sdev)
 {
 	struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev);
 
+	/* if previous slave_alloc returned early, there is nothing to do */
+	if (!zfcp_sdev->port)
+		return;
+
 	zfcp_erp_lun_shutdown_wait(sdev, "scssd_1");
 	put_device(&zfcp_sdev->port->dev);
 }

drivers/scsi/bnx2i/bnx2i_hwi.c

@@ -1906,18 +1906,19 @@ static int bnx2i_queue_scsi_cmd_resp(struct iscsi_session *session,
 	spin_lock(&session->lock);
 	task = iscsi_itt_to_task(bnx2i_conn->cls_conn->dd_data,
 				 cqe->itt & ISCSI_CMD_RESPONSE_INDEX);
-	if (!task) {
+	if (!task || !task->sc) {
 		spin_unlock(&session->lock);
 		return -EINVAL;
 	}
 	sc = task->sc;
-	spin_unlock(&session->lock);
 
 	if (!blk_rq_cpu_valid(sc->request))
 		cpu = smp_processor_id();
 	else
 		cpu = sc->request->cpu;
 
+	spin_unlock(&session->lock);
+
 	p = &per_cpu(bnx2i_percpu, cpu);
 	spin_lock(&p->p_work_lock);
 	if (unlikely(!p->iothread)) {

drivers/scsi/fcoe/fcoe.c

@@ -31,6 +31,8 @@
 #include <linux/sysfs.h>
 #include <linux/ctype.h>
 #include <linux/workqueue.h>
+#include <net/dcbnl.h>
+#include <net/dcbevent.h>
 #include <scsi/scsi_tcq.h>
 #include <scsi/scsicam.h>
 #include <scsi/scsi_transport.h>
@@ -101,6 +103,8 @@ static int fcoe_ddp_done(struct fc_lport *, u16);
 static int fcoe_ddp_target(struct fc_lport *, u16, struct scatterlist *,
 			   unsigned int);
 static int fcoe_cpu_callback(struct notifier_block *, unsigned long, void *);
+static int fcoe_dcb_app_notification(struct notifier_block *notifier,
+				     ulong event, void *ptr);
 
 static bool fcoe_match(struct net_device *netdev);
 static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode);
@@ -129,6 +133,11 @@ static struct notifier_block fcoe_cpu_notifier = {
 	.notifier_call = fcoe_cpu_callback,
 };
 
+/* notification function for DCB events */
+static struct notifier_block dcb_notifier = {
+	.notifier_call = fcoe_dcb_app_notification,
+};
+
 static struct scsi_transport_template *fcoe_nport_scsi_transport;
 static struct scsi_transport_template *fcoe_vport_scsi_transport;
 
@@ -1522,6 +1531,8 @@ int fcoe_xmit(struct fc_lport *lport, struct fc_frame *fp)
 	skb_reset_network_header(skb);
 	skb->mac_len = elen;
 	skb->protocol = htons(ETH_P_FCOE);
+	skb->priority = port->priority;
+
 	if (fcoe->netdev->priv_flags & IFF_802_1Q_VLAN &&
 	    fcoe->realdev->features & NETIF_F_HW_VLAN_TX) {
 		skb->vlan_tci = VLAN_TAG_PRESENT |
@@ -1624,6 +1635,7 @@ static inline int fcoe_filter_frames(struct fc_lport *lport,
 	stats->InvalidCRCCount++;
 	if (stats->InvalidCRCCount < 5)
 		printk(KERN_WARNING "fcoe: dropping frame with CRC error\n");
+	put_cpu();
 	return -EINVAL;
 }
 
@@ -1746,6 +1758,7 @@ int fcoe_percpu_receive_thread(void *arg)
  */
 static void fcoe_dev_setup(void)
 {
+	register_dcbevent_notifier(&dcb_notifier);
 	register_netdevice_notifier(&fcoe_notifier);
 }
 
@@ -1754,9 +1767,69 @@ static void fcoe_dev_setup(void)
  */
 static void fcoe_dev_cleanup(void)
 {
+	unregister_dcbevent_notifier(&dcb_notifier);
 	unregister_netdevice_notifier(&fcoe_notifier);
 }
 
+static struct fcoe_interface *
+fcoe_hostlist_lookup_realdev_port(struct net_device *netdev)
+{
+	struct fcoe_interface *fcoe;
+	struct net_device *real_dev;
+
+	list_for_each_entry(fcoe, &fcoe_hostlist, list) {
+		if (fcoe->netdev->priv_flags & IFF_802_1Q_VLAN)
+			real_dev = vlan_dev_real_dev(fcoe->netdev);
+		else
+			real_dev = fcoe->netdev;
+
+		if (netdev == real_dev)
+			return fcoe;
+	}
+	return NULL;
+}
+
+static int fcoe_dcb_app_notification(struct notifier_block *notifier,
+				     ulong event, void *ptr)
+{
+	struct dcb_app_type *entry = ptr;
+	struct fcoe_interface *fcoe;
+	struct net_device *netdev;
+	struct fcoe_port *port;
+	int prio;
+
+	if (entry->app.selector != DCB_APP_IDTYPE_ETHTYPE)
+		return NOTIFY_OK;
+
+	netdev = dev_get_by_index(&init_net, entry->ifindex);
+	if (!netdev)
+		return NOTIFY_OK;
+
+	fcoe = fcoe_hostlist_lookup_realdev_port(netdev);
+	dev_put(netdev);
+	if (!fcoe)
+		return NOTIFY_OK;
+
+	if (entry->dcbx & DCB_CAP_DCBX_VER_CEE)
+		prio = ffs(entry->app.priority) - 1;
+	else
+		prio = entry->app.priority;
+
+	if (prio < 0)
+		return NOTIFY_OK;
+
+	if (entry->app.protocol == ETH_P_FIP ||
+	    entry->app.protocol == ETH_P_FCOE)
+		fcoe->ctlr.priority = prio;
+
+	if (entry->app.protocol == ETH_P_FCOE) {
+		port = lport_priv(fcoe->ctlr.lp);
+		port->priority = prio;
+	}
+
+	return NOTIFY_OK;
+}
+
 /**
  * fcoe_device_notification() - Handler for net device events
  * @notifier: The context of the notification
@@ -1964,6 +2037,46 @@ static bool fcoe_match(struct net_device *netdev)
 	return true;
 }
 
+/**
+ * fcoe_dcb_create() - Initialize DCB attributes and hooks
+ * @netdev: The net_device object of the L2 link that should be queried
+ * @port: The fcoe_port to bind FCoE APP priority with
+ * @
+ */
+static void fcoe_dcb_create(struct fcoe_interface *fcoe)
+{
+#ifdef CONFIG_DCB
+	int dcbx;
+	u8 fup, up;
+	struct net_device *netdev = fcoe->realdev;
+	struct fcoe_port *port = lport_priv(fcoe->ctlr.lp);
+	struct dcb_app app = {
+				.priority = 0,
+				.protocol = ETH_P_FCOE
+			     };
+
+	/* setup DCB priority attributes. */
+	if (netdev && netdev->dcbnl_ops && netdev->dcbnl_ops->getdcbx) {
+		dcbx = netdev->dcbnl_ops->getdcbx(netdev);
+
+		if (dcbx & DCB_CAP_DCBX_VER_IEEE) {
+			app.selector = IEEE_8021QAZ_APP_SEL_ETHERTYPE;
+			up = dcb_ieee_getapp_mask(netdev, &app);
+			app.protocol = ETH_P_FIP;
+			fup = dcb_ieee_getapp_mask(netdev, &app);
+		} else {
+			app.selector = DCB_APP_IDTYPE_ETHTYPE;
+			up = dcb_getapp(netdev, &app);
+			app.protocol = ETH_P_FIP;
+			fup = dcb_getapp(netdev, &app);
+		}
+
+		port->priority = ffs(up) ? ffs(up) - 1 : 0;
+		fcoe->ctlr.priority = ffs(fup) ? ffs(fup) - 1 : port->priority;
+	}
+#endif
+}
+
 /**
  * fcoe_create() - Create a fcoe interface
  * @netdev  : The net_device object the Ethernet interface to create on
@@ -2007,6 +2120,9 @@ static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode)
 	/* Make this the "master" N_Port */
 	fcoe->ctlr.lp = lport;
 
+	/* setup DCB priority attributes. */
+	fcoe_dcb_create(fcoe);
+
 	/* add to lports list */
 	fcoe_hostlist_add(lport);
 

drivers/scsi/fcoe/fcoe_ctlr.c

@@ -320,6 +320,7 @@ static void fcoe_ctlr_solicit(struct fcoe_ctlr *fip, struct fcoe_fcf *fcf)
 
 	skb_put(skb, sizeof(*sol));
 	skb->protocol = htons(ETH_P_FIP);
+	skb->priority = fip->priority;
 	skb_reset_mac_header(skb);
 	skb_reset_network_header(skb);
 	fip->send(fip, skb);
@@ -474,6 +475,7 @@ static void fcoe_ctlr_send_keep_alive(struct fcoe_ctlr *fip,
 	}
 	skb_put(skb, len);
 	skb->protocol = htons(ETH_P_FIP);
+	skb->priority = fip->priority;
 	skb_reset_mac_header(skb);
 	skb_reset_network_header(skb);
 	fip->send(fip, skb);
@@ -566,6 +568,7 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
 	cap->fip.fip_dl_len = htons(dlen / FIP_BPW);
 
 	skb->protocol = htons(ETH_P_FIP);
+	skb->priority = fip->priority;
 	skb_reset_mac_header(skb);
 	skb_reset_network_header(skb);
 	return 0;
@@ -1911,6 +1914,7 @@ static void fcoe_ctlr_vn_send(struct fcoe_ctlr *fip,
 
 	skb_put(skb, len);
 	skb->protocol = htons(ETH_P_FIP);
+	skb->priority = fip->priority;
 	skb_reset_mac_header(skb);
 	skb_reset_network_header(skb);
 

drivers/scsi/mpt2sas/mpt2sas_scsih.c

@@ -4335,7 +4335,7 @@ _scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 	/* insert into event log */
 	sz = offsetof(Mpi2EventNotificationReply_t, EventData) +
 	     sizeof(Mpi2EventDataSasDeviceStatusChange_t);
-	event_reply = kzalloc(sz, GFP_KERNEL);
+	event_reply = kzalloc(sz, GFP_ATOMIC);
 	if (!event_reply) {
 		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
 		    ioc->name, __FILE__, __LINE__, __func__);

drivers/scsi/qla2xxx/qla_attr.c

@@ -1762,12 +1762,31 @@ qla2x00_get_host_port_state(struct Scsi_Host *shost)
 	scsi_qla_host_t *vha = shost_priv(shost);
 	struct scsi_qla_host *base_vha = pci_get_drvdata(vha->hw->pdev);
 
-	if (!base_vha->flags.online)
+	if (!base_vha->flags.online) {
 		fc_host_port_state(shost) = FC_PORTSTATE_OFFLINE;
-	else if (atomic_read(&base_vha->loop_state) == LOOP_TIMEOUT)
-		fc_host_port_state(shost) = FC_PORTSTATE_UNKNOWN;
-	else
+		return;
+	}
+
+	switch (atomic_read(&base_vha->loop_state)) {
+	case LOOP_UPDATE:
+		fc_host_port_state(shost) = FC_PORTSTATE_DIAGNOSTICS;
+		break;
+	case LOOP_DOWN:
+		if (test_bit(LOOP_RESYNC_NEEDED, &base_vha->dpc_flags))
+			fc_host_port_state(shost) = FC_PORTSTATE_DIAGNOSTICS;
+		else
+			fc_host_port_state(shost) = FC_PORTSTATE_LINKDOWN;
+		break;
+	case LOOP_DEAD:
+		fc_host_port_state(shost) = FC_PORTSTATE_LINKDOWN;
+		break;
+	case LOOP_READY:
 		fc_host_port_state(shost) = FC_PORTSTATE_ONLINE;
+		break;
+	default:
+		fc_host_port_state(shost) = FC_PORTSTATE_UNKNOWN;
+		break;
+	}
 }
 
 static int

drivers/scsi/qla2xxx/qla_dbg.c

@@ -12,17 +12,17 @@
  * |             Level            |   Last Value Used  |     Holes	|
  * ----------------------------------------------------------------------
  * | Module Init and Probe        |       0x0116       |  		|
- * | Mailbox commands             |       0x1129       |		|
+ * | Mailbox commands             |       0x112b       |		|
  * | Device Discovery             |       0x2083       |		|
  * | Queue Command and IO tracing |       0x302e       |     0x3008     |
  * | DPC Thread                   |       0x401c       |		|
  * | Async Events                 |       0x5059       |		|
- * | Timer Routines               |       0x600d       |		|
+ * | Timer Routines               |       0x6010       | 0x600e,0x600f  |
  * | User Space Interactions      |       0x709d       |		|
- * | Task Management              |       0x8041       |    		|
+ * | Task Management              |       0x8041       | 0x800b         |
  * | AER/EEH                      |       0x900f       |		|
  * | Virtual Port                 |       0xa007       |		|
- * | ISP82XX Specific             |       0xb051       |    		|
+ * | ISP82XX Specific             |       0xb052       |    		|
  * | MultiQ                       |       0xc00b       |		|
  * | Misc                         |       0xd00b       |		|
  * ----------------------------------------------------------------------

drivers/scsi/qla2xxx/qla_gbl.h

@@ -578,6 +578,7 @@ extern int qla82xx_check_md_needed(scsi_qla_host_t *);
 extern void qla82xx_chip_reset_cleanup(scsi_qla_host_t *);
 extern int qla82xx_mbx_beacon_ctl(scsi_qla_host_t *, int);
 extern char *qdev_state(uint32_t);
+extern void qla82xx_clear_pending_mbx(scsi_qla_host_t *);
 
 /* BSG related functions */
 extern int qla24xx_bsg_request(struct fc_bsg_job *);

drivers/scsi/qla2xxx/qla_init.c

@@ -1509,7 +1509,8 @@ enable_82xx_npiv:
 				    &ha->fw_xcb_count, NULL, NULL,
 				    &ha->max_npiv_vports, NULL);
 
-				if (!fw_major_version && ql2xallocfwdump)
+				if (!fw_major_version && ql2xallocfwdump
+				    && !IS_QLA82XX(ha))
 					qla2x00_alloc_fw_dump(vha);
 			}
 		} else {

drivers/scsi/qla2xxx/qla_iocb.c

@@ -120,11 +120,10 @@ qla2x00_prep_cont_type0_iocb(struct scsi_qla_host *vha)
  * Returns a pointer to the continuation type 1 IOCB packet.
  */
 static inline cont_a64_entry_t *
-qla2x00_prep_cont_type1_iocb(scsi_qla_host_t *vha)
+qla2x00_prep_cont_type1_iocb(scsi_qla_host_t *vha, struct req_que *req)
 {
 	cont_a64_entry_t *cont_pkt;
 
-	struct req_que *req = vha->req;
 	/* Adjust ring index. */
 	req->ring_index++;
 	if (req->ring_index == req->length) {
@@ -292,7 +291,7 @@ void qla2x00_build_scsi_iocbs_64(srb_t *sp, cmd_entry_t *cmd_pkt,
 			 * Five DSDs are available in the Continuation
 			 * Type 1 IOCB.
 			 */
-			cont_pkt = qla2x00_prep_cont_type1_iocb(vha);
+			cont_pkt = qla2x00_prep_cont_type1_iocb(vha, vha->req);
 			cur_dsd = (uint32_t *)cont_pkt->dseg_0_address;
 			avail_dsds = 5;
 		}
@@ -684,7 +683,7 @@ qla24xx_build_scsi_iocbs(srb_t *sp, struct cmd_type_7 *cmd_pkt,
 			 * Five DSDs are available in the Continuation
 			 * Type 1 IOCB.
 			 */
-			cont_pkt = qla2x00_prep_cont_type1_iocb(vha);
+			cont_pkt = qla2x00_prep_cont_type1_iocb(vha, vha->req);
 			cur_dsd = (uint32_t *)cont_pkt->dseg_0_address;
 			avail_dsds = 5;
 		}
@@ -2070,7 +2069,8 @@ qla2x00_ct_iocb(srb_t *sp, ms_iocb_entry_t *ct_iocb)
 			* Five DSDs are available in the Cont.
 			* Type 1 IOCB.
 			       */
-			cont_pkt = qla2x00_prep_cont_type1_iocb(vha);
+			cont_pkt = qla2x00_prep_cont_type1_iocb(vha,
+			    vha->hw->req_q_map[0]);
 			cur_dsd = (uint32_t *) cont_pkt->dseg_0_address;
 			avail_dsds = 5;
 			cont_iocb_prsnt = 1;
@@ -2096,6 +2096,7 @@ qla24xx_ct_iocb(srb_t *sp, struct ct_entry_24xx *ct_iocb)
 	int index;
 	uint16_t tot_dsds;
         scsi_qla_host_t *vha = sp->fcport->vha;
+	struct qla_hw_data *ha = vha->hw;
 	struct fc_bsg_job *bsg_job = ((struct srb_ctx *)sp->ctx)->u.bsg_job;
 	int loop_iterartion = 0;
 	int cont_iocb_prsnt = 0;
@@ -2141,7 +2142,8 @@ qla24xx_ct_iocb(srb_t *sp, struct ct_entry_24xx *ct_iocb)
 			* Five DSDs are available in the Cont.
 			* Type 1 IOCB.
 			       */
-			cont_pkt = qla2x00_prep_cont_type1_iocb(vha);
+			cont_pkt = qla2x00_prep_cont_type1_iocb(vha,
+			    ha->req_q_map[0]);
 			cur_dsd = (uint32_t *) cont_pkt->dseg_0_address;
 			avail_dsds = 5;
 			cont_iocb_prsnt = 1;

drivers/scsi/qla2xxx/qla_isr.c

@@ -1741,7 +1741,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 				    resid, scsi_bufflen(cp));
 
 				cp->result = DID_ERROR << 16 | lscsi_status;
-				break;
+				goto check_scsi_status;
 			}
 
 			if (!lscsi_status &&

drivers/scsi/qla2xxx/qla_mbx.c

@@ -79,8 +79,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 		mcp->mb[0] = MBS_LINK_DOWN_ERROR;
 		ql_log(ql_log_warn, base_vha, 0x1004,
 		    "FW hung = %d.\n", ha->flags.isp82xx_fw_hung);
-		rval = QLA_FUNCTION_FAILED;
-		goto premature_exit;
+		return QLA_FUNCTION_TIMEOUT;
 	}
 
 	/*
@@ -163,6 +162,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 				HINT_MBX_INT_PENDING) {
 				spin_unlock_irqrestore(&ha->hardware_lock,
 					flags);
+				ha->flags.mbox_busy = 0;
 				ql_dbg(ql_dbg_mbx, base_vha, 0x1010,
 				    "Pending mailbox timeout, exiting.\n");
 				rval = QLA_FUNCTION_TIMEOUT;
@@ -188,6 +188,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 				HINT_MBX_INT_PENDING) {
 				spin_unlock_irqrestore(&ha->hardware_lock,
 					flags);
+				ha->flags.mbox_busy = 0;
 				ql_dbg(ql_dbg_mbx, base_vha, 0x1012,
 				    "Pending mailbox timeout, exiting.\n");
 				rval = QLA_FUNCTION_TIMEOUT;
@@ -302,7 +303,15 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 			if (!test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) &&
 			    !test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) &&
 			    !test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
-
+				if (IS_QLA82XX(ha)) {
+					ql_dbg(ql_dbg_mbx, vha, 0x112a,
+					    "disabling pause transmit on port "
+					    "0 & 1.\n");
+					qla82xx_wr_32(ha,
+					    QLA82XX_CRB_NIU + 0x98,
+					    CRB_NIU_XG_PAUSE_CTL_P0|
+					    CRB_NIU_XG_PAUSE_CTL_P1);
+				}
 				ql_log(ql_log_info, base_vha, 0x101c,
 				    "Mailbox cmd timeout occured. "
 				    "Scheduling ISP abort eeh_busy=0x%x.\n",
@@ -318,7 +327,15 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 			if (!test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) &&
 			    !test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) &&
 			    !test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
-
+				if (IS_QLA82XX(ha)) {
+					ql_dbg(ql_dbg_mbx, vha, 0x112b,
+					    "disabling pause transmit on port "
+					    "0 & 1.\n");
+					qla82xx_wr_32(ha,
+					    QLA82XX_CRB_NIU + 0x98,
+					    CRB_NIU_XG_PAUSE_CTL_P0|
+					    CRB_NIU_XG_PAUSE_CTL_P1);
+				}
 				ql_log(ql_log_info, base_vha, 0x101e,
 				    "Mailbox cmd timeout occured. "
 				    "Scheduling ISP abort.\n");

drivers/scsi/qla2xxx/qla_nx.c

@@ -3817,6 +3817,20 @@ exit:
 	return rval;
 }
 
+void qla82xx_clear_pending_mbx(scsi_qla_host_t *vha)
+{
+	struct qla_hw_data *ha = vha->hw;
+
+	if (ha->flags.mbox_busy) {
+		ha->flags.mbox_int = 1;
+		ha->flags.mbox_busy = 0;
+		ql_log(ql_log_warn, vha, 0x6010,
+		    "Doing premature completion of mbx command.\n");
+		if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags))
+			complete(&ha->mbx_intr_comp);
+	}
+}
+
 void qla82xx_watchdog(scsi_qla_host_t *vha)
 {
 	uint32_t dev_state, halt_status;
@@ -3839,9 +3853,13 @@ void qla82xx_watchdog(scsi_qla_host_t *vha)
 			qla2xxx_wake_dpc(vha);
 		} else {
 			if (qla82xx_check_fw_alive(vha)) {
+				ql_dbg(ql_dbg_timer, vha, 0x6011,
+				    "disabling pause transmit on port 0 & 1.\n");
+				qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x98,
+				    CRB_NIU_XG_PAUSE_CTL_P0|CRB_NIU_XG_PAUSE_CTL_P1);
 				halt_status = qla82xx_rd_32(ha,
 				    QLA82XX_PEG_HALT_STATUS1);
-				ql_dbg(ql_dbg_timer, vha, 0x6005,
+				ql_log(ql_log_info, vha, 0x6005,
 				    "dumping hw/fw registers:.\n "
 				    " PEG_HALT_STATUS1: 0x%x, PEG_HALT_STATUS2: 0x%x,.\n "
 				    " PEG_NET_0_PC: 0x%x, PEG_NET_1_PC: 0x%x,.\n "
@@ -3858,6 +3876,11 @@ void qla82xx_watchdog(scsi_qla_host_t *vha)
 					    QLA82XX_CRB_PEG_NET_3 + 0x3c),
 				    qla82xx_rd_32(ha,
 					    QLA82XX_CRB_PEG_NET_4 + 0x3c));
+				if (LSW(MSB(halt_status)) == 0x67)
+					ql_log(ql_log_warn, vha, 0xb052,
+					    "Firmware aborted with "
+					    "error code 0x00006700. Device is "
+					    "being reset.\n");
 				if (halt_status & HALT_STATUS_UNRECOVERABLE) {
 					set_bit(ISP_UNRECOVERABLE,
 					    &vha->dpc_flags);
@@ -3869,16 +3892,8 @@ void qla82xx_watchdog(scsi_qla_host_t *vha)
 				}
 				qla2xxx_wake_dpc(vha);
 				ha->flags.isp82xx_fw_hung = 1;
-				if (ha->flags.mbox_busy) {
-					ha->flags.mbox_int = 1;
-					ql_log(ql_log_warn, vha, 0x6007,
-					    "Due to FW hung, doing "
-					    "premature completion of mbx "
-					    "command.\n");
-					if (test_bit(MBX_INTR_WAIT,
-					    &ha->mbx_cmd_flags))
-						complete(&ha->mbx_intr_comp);
-				}
+				ql_log(ql_log_warn, vha, 0x6007, "Firmware hung.\n");
+				qla82xx_clear_pending_mbx(vha);
 			}
 		}
 	}
@@ -4073,10 +4088,7 @@ qla82xx_chip_reset_cleanup(scsi_qla_host_t *vha)
 			msleep(1000);
 			if (qla82xx_check_fw_alive(vha)) {
 				ha->flags.isp82xx_fw_hung = 1;
-				if (ha->flags.mbox_busy) {
-					ha->flags.mbox_int = 1;
-					complete(&ha->mbx_intr_comp);
-				}
+				qla82xx_clear_pending_mbx(vha);
 				break;
 			}
 		}

drivers/scsi/qla2xxx/qla_nx.h

@@ -1173,4 +1173,8 @@ struct qla82xx_md_entry_queue {
 
 static const int MD_MIU_TEST_AGT_RDDATA[] = { 0x410000A8, 0x410000AC,
 	0x410000B8, 0x410000BC };
+
+#define CRB_NIU_XG_PAUSE_CTL_P0        0x1
+#define CRB_NIU_XG_PAUSE_CTL_P1        0x8
+
 #endif

drivers/scsi/qla2xxx/qla_os.c

@@ -201,12 +201,12 @@ MODULE_PARM_DESC(ql2xmdcapmask,
 		"Set the Minidump driver capture mask level. "
 		"Default is 0x7F - Can be set to 0x3, 0x7, 0xF, 0x1F, 0x7F.");
 
-int ql2xmdenable;
+int ql2xmdenable = 1;
 module_param(ql2xmdenable, int, S_IRUGO);
 MODULE_PARM_DESC(ql2xmdenable,
 		"Enable/disable MiniDump. "
-		"0 (Default) - MiniDump disabled. "
-		"1 - MiniDump enabled.");
+		"0 - MiniDump disabled. "
+		"1 (Default) - MiniDump enabled.");
 
 /*
  * SCSI host template entry points
@@ -423,6 +423,7 @@ fail2:
 	qla25xx_delete_queues(vha);
 	destroy_workqueue(ha->wq);
 	ha->wq = NULL;
+	vha->req = ha->req_q_map[0];
 fail:
 	ha->mqenable = 0;
 	kfree(ha->req_q_map);
@@ -814,49 +815,6 @@ qla2x00_wait_for_chip_reset(scsi_qla_host_t *vha)
 	return return_status;
 }
 
-/*
- * qla2x00_wait_for_loop_ready
- *    Wait for MAX_LOOP_TIMEOUT(5 min) value for loop
- *    to be in LOOP_READY state.
- * Input:
- *     ha - pointer to host adapter structure
- *
- * Note:
- *    Does context switching-Release SPIN_LOCK
- *    (if any) before calling this routine.
- *
- *
- * Return:
- *    Success (LOOP_READY) : 0
- *    Failed  (LOOP_NOT_READY) : 1
- */
-static inline int
-qla2x00_wait_for_loop_ready(scsi_qla_host_t *vha)
-{
-	int 	 return_status = QLA_SUCCESS;
-	unsigned long loop_timeout ;
-	struct qla_hw_data *ha = vha->hw;
-	scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
-
-	/* wait for 5 min at the max for loop to be ready */
-	loop_timeout = jiffies + (MAX_LOOP_TIMEOUT * HZ);
-
-	while ((!atomic_read(&base_vha->loop_down_timer) &&
-	    atomic_read(&base_vha->loop_state) == LOOP_DOWN) ||
-	    atomic_read(&base_vha->loop_state) != LOOP_READY) {
-		if (atomic_read(&base_vha->loop_state) == LOOP_DEAD) {
-			return_status = QLA_FUNCTION_FAILED;
-			break;
-		}
-		msleep(1000);
-		if (time_after_eq(jiffies, loop_timeout)) {
-			return_status = QLA_FUNCTION_FAILED;
-			break;
-		}
-	}
-	return (return_status);
-}
-
 static void
 sp_get(struct srb *sp)
 {
@@ -1035,12 +993,6 @@ __qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type,
 		    "Wait for hba online failed for cmd=%p.\n", cmd);
 		goto eh_reset_failed;
 	}
-	err = 1;
-	if (qla2x00_wait_for_loop_ready(vha) != QLA_SUCCESS) {
-		ql_log(ql_log_warn, vha, 0x800b,
-		    "Wait for loop ready failed for cmd=%p.\n", cmd);
-		goto eh_reset_failed;
-	}
 	err = 2;
 	if (do_reset(fcport, cmd->device->lun, cmd->request->cpu + 1)
 		!= QLA_SUCCESS) {
@@ -1137,10 +1089,9 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
 		goto eh_bus_reset_done;
 	}
 
-	if (qla2x00_wait_for_loop_ready(vha) == QLA_SUCCESS) {
-		if (qla2x00_loop_reset(vha) == QLA_SUCCESS)
-			ret = SUCCESS;
-	}
+	if (qla2x00_loop_reset(vha) == QLA_SUCCESS)
+		ret = SUCCESS;
+
 	if (ret == FAILED)
 		goto eh_bus_reset_done;
 
@@ -1206,15 +1157,6 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
 	if (qla2x00_wait_for_reset_ready(vha) != QLA_SUCCESS)
 		goto eh_host_reset_lock;
 
-	/*
-	 * Fixme-may be dpc thread is active and processing
-	 * loop_resync,so wait a while for it to
-	 * be completed and then issue big hammer.Otherwise
-	 * it may cause I/O failure as big hammer marks the
-	 * devices as lost kicking of the port_down_timer
-	 * while dpc is stuck for the mailbox to complete.
-	 */
-	qla2x00_wait_for_loop_ready(vha);
 	if (vha != base_vha) {
 		if (qla2x00_vp_abort_isp(vha))
 			goto eh_host_reset_lock;
@@ -1297,16 +1239,13 @@ qla2x00_loop_reset(scsi_qla_host_t *vha)
 		atomic_set(&vha->loop_state, LOOP_DOWN);
 		atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
 		qla2x00_mark_all_devices_lost(vha, 0);
-		qla2x00_wait_for_loop_ready(vha);
 	}
 
 	if (ha->flags.enable_lip_reset) {
 		ret = qla2x00_lip_reset(vha);
-		if (ret != QLA_SUCCESS) {
+		if (ret != QLA_SUCCESS)
 			ql_dbg(ql_dbg_taskm, vha, 0x802e,
 			    "lip_reset failed (%d).\n", ret);
-		} else
-			qla2x00_wait_for_loop_ready(vha);
 	}
 
 	/* Issue marker command only when we are going to start the I/O */
@@ -4070,13 +4009,8 @@ qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
 		/* For ISP82XX complete any pending mailbox cmd */
 		if (IS_QLA82XX(ha)) {
 			ha->flags.isp82xx_fw_hung = 1;
-			if (ha->flags.mbox_busy) {
-				ha->flags.mbox_int = 1;
-				ql_dbg(ql_dbg_aer, vha, 0x9001,
-				    "Due to pci channel io frozen, doing premature "
-				    "completion of mbx command.\n");
-				complete(&ha->mbx_intr_comp);
-			}
+			ql_dbg(ql_dbg_aer, vha, 0x9001, "Pci channel io frozen\n");
+			qla82xx_clear_pending_mbx(vha);
 		}
 		qla2x00_free_irqs(vha);
 		pci_disable_device(pdev);

drivers/scsi/qla2xxx/qla_version.h

@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.07.07-k"
+#define QLA2XXX_VERSION      "8.03.07.12-k"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	3

drivers/scsi/qla4xxx/ql4_def.h

@@ -147,7 +147,7 @@
 #define ISCSI_ALIAS_SIZE		32	/* ISCSI Alias name size */
 #define ISCSI_NAME_SIZE			0xE0	/* ISCSI Name size */
 
-#define QL4_SESS_RECOVERY_TMO		30	/* iSCSI session */
+#define QL4_SESS_RECOVERY_TMO		120	/* iSCSI session */
 						/* recovery timeout */
 
 #define LSDW(x) ((u32)((u64)(x)))
@@ -173,6 +173,8 @@
 #define ISNS_DEREG_TOV			5
 #define HBA_ONLINE_TOV			30
 #define DISABLE_ACB_TOV			30
+#define IP_CONFIG_TOV			30
+#define LOGIN_TOV			12
 
 #define MAX_RESET_HA_RETRIES		2
 
@@ -240,6 +242,45 @@ struct ddb_entry {
 
 	uint16_t fw_ddb_index;	/* DDB firmware index */
 	uint32_t fw_ddb_device_state; /* F/W Device State  -- see ql4_fw.h */
+	uint16_t ddb_type;
+#define FLASH_DDB 0x01
+
+	struct dev_db_entry fw_ddb_entry;
+	int (*unblock_sess)(struct iscsi_cls_session *cls_session);
+	int (*ddb_change)(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
+			  struct ddb_entry *ddb_entry, uint32_t state);
+
+	/* Driver Re-login  */
+	unsigned long flags;		  /* DDB Flags */
+	uint16_t default_relogin_timeout; /*  Max time to wait for
+					   *  relogin to complete */
+	atomic_t retry_relogin_timer;	  /* Min Time between relogins
+					   * (4000 only) */
+	atomic_t relogin_timer;		  /* Max Time to wait for
+					   * relogin to complete */
+	atomic_t relogin_retry_count;	  /* Num of times relogin has been
+					   * retried */
+	uint32_t default_time2wait;	  /* Default Min time between
+					   * relogins (+aens) */
+
+};
+
+struct qla_ddb_index {
+	struct list_head list;
+	uint16_t fw_ddb_idx;
+	struct dev_db_entry fw_ddb;
+};
+
+#define DDB_IPADDR_LEN 64
+
+struct ql4_tuple_ddb {
+	int port;
+	int tpgt;
+	char ip_addr[DDB_IPADDR_LEN];
+	char iscsi_name[ISCSI_NAME_SIZE];
+	uint16_t options;
+#define DDB_OPT_IPV6 0x0e0e
+#define DDB_OPT_IPV4 0x0f0f
 };
 
 /*
@@ -411,7 +452,7 @@ struct scsi_qla_host {
 #define AF_FW_RECOVERY			19 /* 0x00080000 */
 #define AF_EEH_BUSY			20 /* 0x00100000 */
 #define AF_PCI_CHANNEL_IO_PERM_FAILURE	21 /* 0x00200000 */
-
+#define AF_BUILD_DDB_LIST		22 /* 0x00400000 */
 	unsigned long dpc_flags;
 
 #define DPC_RESET_HA			1 /* 0x00000002 */
@@ -604,6 +645,7 @@ struct scsi_qla_host {
 	uint16_t bootload_minor;
 	uint16_t bootload_patch;
 	uint16_t bootload_build;
+	uint16_t def_timeout; /* Default login timeout */
 
 	uint32_t flash_state;
 #define	QLFLASH_WAITING		0
@@ -623,6 +665,11 @@ struct scsi_qla_host {
 	uint16_t iscsi_pci_func_cnt;
 	uint8_t model_name[16];
 	struct completion disable_acb_comp;
+	struct dma_pool *fw_ddb_dma_pool;
+#define DDB_DMA_BLOCK_SIZE 512
+	uint16_t pri_ddb_idx;
+	uint16_t sec_ddb_idx;
+	int is_reset;
 };
 
 struct ql4_task_data {
@@ -835,6 +882,10 @@ static inline int ql4xxx_reset_active(struct scsi_qla_host *ha)
 /*---------------------------------------------------------------------------*/
 
 /* Defines for qla4xxx_initialize_adapter() and qla4xxx_recover_adapter() */
+
+#define INIT_ADAPTER    0
+#define RESET_ADAPTER   1
+
 #define PRESERVE_DDB_LIST	0
 #define REBUILD_DDB_LIST	1
 

drivers/scsi/qla4xxx/ql4_fw.h

@@ -12,6 +12,7 @@
 #define MAX_PRST_DEV_DB_ENTRIES		64
 #define MIN_DISC_DEV_DB_ENTRY		MAX_PRST_DEV_DB_ENTRIES
 #define MAX_DEV_DB_ENTRIES		512
+#define MAX_DEV_DB_ENTRIES_40XX		256
 
 /*************************************************************************
  *
@@ -604,6 +605,13 @@ struct addr_ctrl_blk {
 	uint8_t res14[140];	/* 274-2FF */
 };
 
+#define IP_ADDR_COUNT	4 /* Total 4 IP address supported in one interface
+			   * One IPv4, one IPv6 link local and 2 IPv6
+			   */
+
+#define IP_STATE_MASK	0x0F000000
+#define IP_STATE_SHIFT	24
+
 struct init_fw_ctrl_blk {
 	struct addr_ctrl_blk pri;
 /*	struct addr_ctrl_blk sec;*/

drivers/scsi/qla4xxx/ql4_glbl.h

@@ -13,7 +13,7 @@ struct iscsi_cls_conn;
 int qla4xxx_hw_reset(struct scsi_qla_host *ha);
 int ql4xxx_lock_drvr_wait(struct scsi_qla_host *a);
 int qla4xxx_send_command_to_isp(struct scsi_qla_host *ha, struct srb *srb);
-int qla4xxx_initialize_adapter(struct scsi_qla_host *ha);
+int qla4xxx_initialize_adapter(struct scsi_qla_host *ha, int is_reset);
 int qla4xxx_soft_reset(struct scsi_qla_host *ha);
 irqreturn_t qla4xxx_intr_handler(int irq, void *dev_id);
 
@@ -153,10 +153,13 @@ int qla4xxx_req_ddb_entry(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
 			  uint32_t *mbx_sts);
 int qla4xxx_clear_ddb_entry(struct scsi_qla_host *ha, uint32_t fw_ddb_index);
 int qla4xxx_send_passthru0(struct iscsi_task *task);
+void qla4xxx_free_ddb_index(struct scsi_qla_host *ha);
 int qla4xxx_get_mgmt_data(struct scsi_qla_host *ha, uint16_t fw_ddb_index,
 			  uint16_t stats_size, dma_addr_t stats_dma);
 void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha,
 				       struct ddb_entry *ddb_entry);
+void qla4xxx_update_session_conn_fwddb_param(struct scsi_qla_host *ha,
+					     struct ddb_entry *ddb_entry);
 int qla4xxx_bootdb_by_index(struct scsi_qla_host *ha,
 			    struct dev_db_entry *fw_ddb_entry,
 			    dma_addr_t fw_ddb_entry_dma, uint16_t ddb_index);
@@ -169,11 +172,22 @@ int qla4xxx_set_nvram(struct scsi_qla_host *ha, dma_addr_t nvram_dma,
 int qla4xxx_restore_factory_defaults(struct scsi_qla_host *ha,
 				     uint32_t region, uint32_t field0,
 				     uint32_t field1);
+int qla4xxx_get_ddb_index(struct scsi_qla_host *ha, uint16_t *ddb_index);
+void qla4xxx_login_flash_ddb(struct iscsi_cls_session *cls_session);
+int qla4xxx_unblock_ddb(struct iscsi_cls_session *cls_session);
+int qla4xxx_unblock_flash_ddb(struct iscsi_cls_session *cls_session);
+int qla4xxx_flash_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
+			     struct ddb_entry *ddb_entry, uint32_t state);
+int qla4xxx_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
+		       struct ddb_entry *ddb_entry, uint32_t state);
+void qla4xxx_build_ddb_list(struct scsi_qla_host *ha, int is_reset);
 
 /* BSG Functions */
 int qla4xxx_bsg_request(struct bsg_job *bsg_job);
 int qla4xxx_process_vendor_specific(struct bsg_job *bsg_job);
 
+void qla4xxx_arm_relogin_timer(struct ddb_entry *ddb_entry);
+
 extern int ql4xextended_error_logging;
 extern int ql4xdontresethba;
 extern int ql4xenablemsix;

drivers/scsi/qla4xxx/ql4_init.c

@@ -773,22 +773,24 @@ int qla4xxx_start_firmware(struct scsi_qla_host *ha)
  * be freed so that when login happens from user space there are free DDB
  * indices available.
  **/
-static void qla4xxx_free_ddb_index(struct scsi_qla_host *ha)
+void qla4xxx_free_ddb_index(struct scsi_qla_host *ha)
 {
 	int max_ddbs;
 	int ret;
 	uint32_t idx = 0, next_idx = 0;
 	uint32_t state = 0, conn_err = 0;
 
-	max_ddbs =  is_qla40XX(ha) ? MAX_PRST_DEV_DB_ENTRIES :
+	max_ddbs =  is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX :
 				     MAX_DEV_DB_ENTRIES;
 
 	for (idx = 0; idx < max_ddbs; idx = next_idx) {
 		ret = qla4xxx_get_fwddb_entry(ha, idx, NULL, 0, NULL,
 					      &next_idx, &state, &conn_err,
 						NULL, NULL);
-		if (ret == QLA_ERROR)
+		if (ret == QLA_ERROR) {
+			next_idx++;
 			continue;
+		}
 		if (state == DDB_DS_NO_CONNECTION_ACTIVE ||
 		    state == DDB_DS_SESSION_FAILED) {
 			DEBUG2(ql4_printk(KERN_INFO, ha,
@@ -804,7 +806,6 @@ static void qla4xxx_free_ddb_index(struct scsi_qla_host *ha)
 	}
 }
 
-
 /**
  * qla4xxx_initialize_adapter - initiailizes hba
  * @ha: Pointer to host adapter structure.
@@ -812,7 +813,7 @@ static void qla4xxx_free_ddb_index(struct scsi_qla_host *ha)
  * This routine parforms all of the steps necessary to initialize the adapter.
  *
  **/
-int qla4xxx_initialize_adapter(struct scsi_qla_host *ha)
+int qla4xxx_initialize_adapter(struct scsi_qla_host *ha, int is_reset)
 {
 	int status = QLA_ERROR;
 
@@ -840,7 +841,8 @@ int qla4xxx_initialize_adapter(struct scsi_qla_host *ha)
 	if (status == QLA_ERROR)
 		goto exit_init_hba;
 
-	qla4xxx_free_ddb_index(ha);
+	if (is_reset == RESET_ADAPTER)
+		qla4xxx_build_ddb_list(ha, is_reset);
 
 	set_bit(AF_ONLINE, &ha->flags);
 exit_init_hba:
@@ -855,38 +857,12 @@ exit_init_hba:
 	return status;
 }
 
-/**
- * qla4xxx_process_ddb_changed - process ddb state change
- * @ha - Pointer to host adapter structure.
- * @fw_ddb_index - Firmware's device database index
- * @state - Device state
- *
- * This routine processes a Decive Database Changed AEN Event.
- **/
-int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
-		uint32_t state, uint32_t conn_err)
+int qla4xxx_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
+		       struct ddb_entry *ddb_entry, uint32_t state)
 {
-	struct ddb_entry * ddb_entry;
 	uint32_t old_fw_ddb_device_state;
 	int status = QLA_ERROR;
 
-	/* check for out of range index */
-	if (fw_ddb_index >= MAX_DDB_ENTRIES)
-		goto exit_ddb_event;
-
-	/* Get the corresponging ddb entry */
-	ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, fw_ddb_index);
-	/* Device does not currently exist in our database. */
-	if (ddb_entry == NULL) {
-		ql4_printk(KERN_ERR, ha, "%s: No ddb_entry at FW index [%d]\n",
-			   __func__, fw_ddb_index);
-
-		if (state == DDB_DS_NO_CONNECTION_ACTIVE)
-			clear_bit(fw_ddb_index, ha->ddb_idx_map);
-
-		goto exit_ddb_event;
-	}
-
 	old_fw_ddb_device_state = ddb_entry->fw_ddb_device_state;
 	DEBUG2(ql4_printk(KERN_INFO, ha,
 			  "%s: DDB - old state = 0x%x, new state = 0x%x for "
@@ -900,9 +876,7 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
 		switch (state) {
 		case DDB_DS_SESSION_ACTIVE:
 		case DDB_DS_DISCOVERY:
-			iscsi_conn_start(ddb_entry->conn);
-			iscsi_conn_login_event(ddb_entry->conn,
-					       ISCSI_CONN_STATE_LOGGED_IN);
+			ddb_entry->unblock_sess(ddb_entry->sess);
 			qla4xxx_update_session_conn_param(ha, ddb_entry);
 			status = QLA_SUCCESS;
 			break;
@@ -936,9 +910,7 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
 		switch (state) {
 		case DDB_DS_SESSION_ACTIVE:
 		case DDB_DS_DISCOVERY:
-			iscsi_conn_start(ddb_entry->conn);
-			iscsi_conn_login_event(ddb_entry->conn,
-					       ISCSI_CONN_STATE_LOGGED_IN);
+			ddb_entry->unblock_sess(ddb_entry->sess);
 			qla4xxx_update_session_conn_param(ha, ddb_entry);
 			status = QLA_SUCCESS;
 			break;
@@ -954,7 +926,198 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
 				__func__));
 		break;
 	}
+	return status;
+}
+
+void qla4xxx_arm_relogin_timer(struct ddb_entry *ddb_entry)
+{
+	/*
+	 * This triggers a relogin.  After the relogin_timer
+	 * expires, the relogin gets scheduled.  We must wait a
+	 * minimum amount of time since receiving an 0x8014 AEN
+	 * with failed device_state or a logout response before
+	 * we can issue another relogin.
+	 *
+	 * Firmware pads this timeout: (time2wait +1).
+	 * Driver retry to login should be longer than F/W.
+	 * Otherwise F/W will fail
+	 * set_ddb() mbx cmd with 0x4005 since it still
+	 * counting down its time2wait.
+	 */
+	atomic_set(&ddb_entry->relogin_timer, 0);
+	atomic_set(&ddb_entry->retry_relogin_timer,
+		   ddb_entry->default_time2wait + 4);
+
+}
+
+int qla4xxx_flash_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
+			     struct ddb_entry *ddb_entry, uint32_t state)
+{
+	uint32_t old_fw_ddb_device_state;
+	int status = QLA_ERROR;
+
+	old_fw_ddb_device_state = ddb_entry->fw_ddb_device_state;
+	DEBUG2(ql4_printk(KERN_INFO, ha,
+			  "%s: DDB - old state = 0x%x, new state = 0x%x for "
+			  "index [%d]\n", __func__,
+			  ddb_entry->fw_ddb_device_state, state, fw_ddb_index));
+
+	ddb_entry->fw_ddb_device_state = state;
+
+	switch (old_fw_ddb_device_state) {
+	case DDB_DS_LOGIN_IN_PROCESS:
+	case DDB_DS_NO_CONNECTION_ACTIVE:
+		switch (state) {
+		case DDB_DS_SESSION_ACTIVE:
+			ddb_entry->unblock_sess(ddb_entry->sess);
+			qla4xxx_update_session_conn_fwddb_param(ha, ddb_entry);
+			status = QLA_SUCCESS;
+			break;
+		case DDB_DS_SESSION_FAILED:
+			iscsi_block_session(ddb_entry->sess);
+			if (!test_bit(DF_RELOGIN, &ddb_entry->flags))
+				qla4xxx_arm_relogin_timer(ddb_entry);
+			status = QLA_SUCCESS;
+			break;
+		}
+		break;
+	case DDB_DS_SESSION_ACTIVE:
+		switch (state) {
+		case DDB_DS_SESSION_FAILED:
+			iscsi_block_session(ddb_entry->sess);
+			if (!test_bit(DF_RELOGIN, &ddb_entry->flags))
+				qla4xxx_arm_relogin_timer(ddb_entry);
+			status = QLA_SUCCESS;
+			break;
+		}
+		break;
+	case DDB_DS_SESSION_FAILED:
+		switch (state) {
+		case DDB_DS_SESSION_ACTIVE:
+			ddb_entry->unblock_sess(ddb_entry->sess);
+			qla4xxx_update_session_conn_fwddb_param(ha, ddb_entry);
+			status = QLA_SUCCESS;
+			break;
+		case DDB_DS_SESSION_FAILED:
+			if (!test_bit(DF_RELOGIN, &ddb_entry->flags))
+				qla4xxx_arm_relogin_timer(ddb_entry);
+			status = QLA_SUCCESS;
+			break;
+		}
+		break;
+	default:
+		DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Unknown Event\n",
+				  __func__));
+		break;
+	}
+	return status;
+}
+
+/**
+ * qla4xxx_process_ddb_changed - process ddb state change
+ * @ha - Pointer to host adapter structure.
+ * @fw_ddb_index - Firmware's device database index
+ * @state - Device state
+ *
+ * This routine processes a Decive Database Changed AEN Event.
+ **/
+int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha,
+				uint32_t fw_ddb_index,
+				uint32_t state, uint32_t conn_err)
+{
+	struct ddb_entry *ddb_entry;
+	int status = QLA_ERROR;
+
+	/* check for out of range index */
+	if (fw_ddb_index >= MAX_DDB_ENTRIES)
+		goto exit_ddb_event;
+
+	/* Get the corresponging ddb entry */
+	ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, fw_ddb_index);
+	/* Device does not currently exist in our database. */
+	if (ddb_entry == NULL) {
+		ql4_printk(KERN_ERR, ha, "%s: No ddb_entry at FW index [%d]\n",
+			   __func__, fw_ddb_index);
+
+		if (state == DDB_DS_NO_CONNECTION_ACTIVE)
+			clear_bit(fw_ddb_index, ha->ddb_idx_map);
+
+		goto exit_ddb_event;
+	}
+
+	ddb_entry->ddb_change(ha, fw_ddb_index, ddb_entry, state);
 
 exit_ddb_event:
 	return status;
 }
+
+/**
+ * qla4xxx_login_flash_ddb - Login to target (DDB)
+ * @cls_session: Pointer to the session to login
+ *
+ * This routine logins to the target.
+ * Issues setddb and conn open mbx
+ **/
+void qla4xxx_login_flash_ddb(struct iscsi_cls_session *cls_session)
+{
+	struct iscsi_session *sess;
+	struct ddb_entry *ddb_entry;
+	struct scsi_qla_host *ha;
+	struct dev_db_entry *fw_ddb_entry = NULL;
+	dma_addr_t fw_ddb_dma;
+	uint32_t mbx_sts = 0;
+	int ret;
+
+	sess = cls_session->dd_data;
+	ddb_entry = sess->dd_data;
+	ha =  ddb_entry->ha;
+
+	if (!test_bit(AF_LINK_UP, &ha->flags))
+		return;
+
+	if (ddb_entry->ddb_type != FLASH_DDB) {
+		DEBUG2(ql4_printk(KERN_INFO, ha,
+				  "Skipping login to non FLASH DB"));
+		goto exit_login;
+	}
+
+	fw_ddb_entry = dma_pool_alloc(ha->fw_ddb_dma_pool, GFP_KERNEL,
+				      &fw_ddb_dma);
+	if (fw_ddb_entry == NULL) {
+		DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n"));
+		goto exit_login;
+	}
+
+	if (ddb_entry->fw_ddb_index == INVALID_ENTRY) {
+		ret = qla4xxx_get_ddb_index(ha, &ddb_entry->fw_ddb_index);
+		if (ret == QLA_ERROR)
+			goto exit_login;
+
+		ha->fw_ddb_index_map[ddb_entry->fw_ddb_index] = ddb_entry;
+		ha->tot_ddbs++;
+	}
+
+	memcpy(fw_ddb_entry, &ddb_entry->fw_ddb_entry,
+	       sizeof(struct dev_db_entry));
+	ddb_entry->sess->target_id = ddb_entry->fw_ddb_index;
+
+	ret = qla4xxx_set_ddb_entry(ha, ddb_entry->fw_ddb_index,
+				    fw_ddb_dma, &mbx_sts);
+	if (ret == QLA_ERROR) {
+		DEBUG2(ql4_printk(KERN_ERR, ha, "Set DDB failed\n"));
+		goto exit_login;
+	}
+
+	ddb_entry->fw_ddb_device_state = DDB_DS_LOGIN_IN_PROCESS;
+	ret = qla4xxx_conn_open(ha, ddb_entry->fw_ddb_index);
+	if (ret == QLA_ERROR) {
+		ql4_printk(KERN_ERR, ha, "%s: Login failed: %s\n", __func__,
+			   sess->targetname);
+		goto exit_login;
+	}
+
+exit_login:
+	if (fw_ddb_entry)
+		dma_pool_free(ha->fw_ddb_dma_pool, fw_ddb_entry, fw_ddb_dma);
+}
+

drivers/scsi/qla4xxx/ql4_mbx.c

@@ -41,6 +41,16 @@ int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount,
 		return status;
 	}
 
+	if (is_qla40XX(ha)) {
+		if (test_bit(AF_HA_REMOVAL, &ha->flags)) {
+			DEBUG2(ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: "
+					  "prematurely completing mbx cmd as "
+					  "adapter removal detected\n",
+					  ha->host_no, __func__));
+			return status;
+		}
+	}
+
 	if (is_qla8022(ha)) {
 		if (test_bit(AF_FW_RECOVERY, &ha->flags)) {
 			DEBUG2(ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: "
@@ -413,6 +423,7 @@ qla4xxx_update_local_ifcb(struct scsi_qla_host *ha,
 	memcpy(ha->name_string, init_fw_cb->iscsi_name,
 		min(sizeof(ha->name_string),
 		sizeof(init_fw_cb->iscsi_name)));
+	ha->def_timeout = le16_to_cpu(init_fw_cb->def_timeout);
 	/*memcpy(ha->alias, init_fw_cb->Alias,
 	       min(sizeof(ha->alias), sizeof(init_fw_cb->Alias)));*/
 

drivers/scsi/qla4xxx/ql4_version.h

@@ -5,4 +5,4 @@
  * See LICENSE.qla4xxx for copyright and licensing details.
  */
 
-#define QLA4XXX_DRIVER_VERSION	"5.02.00-k8"
+#define QLA4XXX_DRIVER_VERSION	"5.02.00-k9"

include/scsi/libfcoe.h

@@ -147,6 +147,7 @@ struct fcoe_ctlr {
 	u8 map_dest;
 	u8 spma;
 	u8 probe_tries;
+	u8 priority;
 	u8 dest_addr[ETH_ALEN];
 	u8 ctl_src_addr[ETH_ALEN];
 
@@ -301,6 +302,7 @@ struct fcoe_percpu_s {
  * @lport:		       The associated local port
  * @fcoe_pending_queue:	       The pending Rx queue of skbs
  * @fcoe_pending_queue_active: Indicates if the pending queue is active
+ * @priority:		       Packet priority (DCB)
  * @max_queue_depth:	       Max queue depth of pending queue
  * @min_queue_depth:	       Min queue depth of pending queue
  * @timer:		       The queue timer
@@ -316,6 +318,7 @@ struct fcoe_port {
 	struct fc_lport	      *lport;
 	struct sk_buff_head   fcoe_pending_queue;
 	u8		      fcoe_pending_queue_active;
+	u8		      priority;
 	u32		      max_queue_depth;
 	u32		      min_queue_depth;
 	struct timer_list     timer;

kernel/events/core.c

@@ -3558,9 +3558,13 @@ static void ring_buffer_wakeup(struct perf_event *event)
 
 	rcu_read_lock();
 	rb = rcu_dereference(event->rb);
-	list_for_each_entry_rcu(event, &rb->event_list, rb_entry) {
+	if (!rb)
+		goto unlock;
+
+	list_for_each_entry_rcu(event, &rb->event_list, rb_entry)
 		wake_up_all(&event->waitq);
-	}
+
+unlock:
 	rcu_read_unlock();
 }
 

kernel/sched_fair.c

@@ -2352,13 +2352,11 @@ again:
 		if (!smt && (sd->flags & SD_SHARE_CPUPOWER))
 			continue;
 
-		if (!(sd->flags & SD_SHARE_PKG_RESOURCES)) {
-			if (!smt) {
-				smt = 1;
-				goto again;
-			}
+		if (smt && !(sd->flags & SD_SHARE_CPUPOWER))
+			break;
+
+		if (!(sd->flags & SD_SHARE_PKG_RESOURCES))
 			break;
-		}
 
 		sg = sd->groups;
 		do {
@@ -2378,6 +2376,10 @@ next:
 			sg = sg->next;
 		} while (sg != sd->groups);
 	}
+	if (!smt) {
+		smt = 1;
+		goto again;
+	}
 done:
 	rcu_read_unlock();