Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next-2.6

drivers/net/sfc/efx.c

@@ -1874,6 +1874,17 @@ static void efx_set_multicast_list(struct net_device *net_dev)
 	/* Otherwise efx_start_port() will do this */
 }
 
+static int efx_set_features(struct net_device *net_dev, u32 data)
+{
+	struct efx_nic *efx = netdev_priv(net_dev);
+
+	/* If disabling RX n-tuple filtering, clear existing filters */
+	if (net_dev->features & ~data & NETIF_F_NTUPLE)
+		efx_filter_clear_rx(efx, EFX_FILTER_PRI_MANUAL);
+
+	return 0;
+}
+
 static const struct net_device_ops efx_netdev_ops = {
 	.ndo_open		= efx_net_open,
 	.ndo_stop		= efx_net_stop,
@@ -1885,6 +1896,7 @@ static const struct net_device_ops efx_netdev_ops = {
 	.ndo_change_mtu		= efx_change_mtu,
 	.ndo_set_mac_address	= efx_set_mac_address,
 	.ndo_set_multicast_list = efx_set_multicast_list,
+	.ndo_set_features	= efx_set_features,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller = efx_netpoll,
 #endif
@@ -2269,7 +2281,6 @@ static int efx_init_struct(struct efx_nic *efx, struct efx_nic_type *type,
 	strlcpy(efx->name, pci_name(pci_dev), sizeof(efx->name));
 
 	efx->net_dev = net_dev;
-	efx->rx_checksum_enabled = true;
 	spin_lock_init(&efx->stats_lock);
 	mutex_init(&efx->mac_lock);
 	efx->mac_op = type->default_mac_ops;
@@ -2452,12 +2463,15 @@ static int __devinit efx_pci_probe(struct pci_dev *pci_dev,
 		return -ENOMEM;
 	net_dev->features |= (type->offload_features | NETIF_F_SG |
 			      NETIF_F_HIGHDMA | NETIF_F_TSO |
-			      NETIF_F_GRO);
+			      NETIF_F_RXCSUM);
 	if (type->offload_features & NETIF_F_V6_CSUM)
 		net_dev->features |= NETIF_F_TSO6;
 	/* Mask for features that also apply to VLAN devices */
 	net_dev->vlan_features |= (NETIF_F_ALL_CSUM | NETIF_F_SG |
-				   NETIF_F_HIGHDMA | NETIF_F_TSO);
+				   NETIF_F_HIGHDMA | NETIF_F_ALL_TSO |
+				   NETIF_F_RXCSUM);
+	/* All offloads can be toggled */
+	net_dev->hw_features = net_dev->features & ~NETIF_F_HIGHDMA;
 	efx = netdev_priv(net_dev);
 	pci_set_drvdata(pci_dev, efx);
 	SET_NETDEV_DEV(net_dev, &pci_dev->dev);

drivers/net/sfc/ethtool.c

@@ -178,19 +178,27 @@ static struct efx_ethtool_stat efx_ethtool_stats[] = {
  */
 
 /* Identify device by flashing LEDs */
-static int efx_ethtool_phys_id(struct net_device *net_dev, u32 count)
+static int efx_ethtool_phys_id(struct net_device *net_dev,
+			       enum ethtool_phys_id_state state)
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
+	enum efx_led_mode mode;
 
-	do {
-		efx->type->set_id_led(efx, EFX_LED_ON);
-		schedule_timeout_interruptible(HZ / 2);
-
-		efx->type->set_id_led(efx, EFX_LED_OFF);
-		schedule_timeout_interruptible(HZ / 2);
-	} while (!signal_pending(current) && --count != 0);
+	switch (state) {
+	case ETHTOOL_ID_ON:
+		mode = EFX_LED_ON;
+		break;
+	case ETHTOOL_ID_OFF:
+		mode = EFX_LED_OFF;
+		break;
+	case ETHTOOL_ID_INACTIVE:
+		mode = EFX_LED_DEFAULT;
+		break;
+	default:
+		return -EINVAL;
+	}
 
-	efx->type->set_id_led(efx, EFX_LED_DEFAULT);
+	efx->type->set_id_led(efx, mode);
 	return 0;
 }
 
@@ -518,72 +526,6 @@ static void efx_ethtool_get_stats(struct net_device *net_dev,
 	}
 }
 
-static int efx_ethtool_set_tso(struct net_device *net_dev, u32 enable)
-{
-	struct efx_nic *efx __attribute__ ((unused)) = netdev_priv(net_dev);
-	u32 features;
-
-	features = NETIF_F_TSO;
-	if (efx->type->offload_features & NETIF_F_V6_CSUM)
-		features |= NETIF_F_TSO6;
-
-	if (enable)
-		net_dev->features |= features;
-	else
-		net_dev->features &= ~features;
-
-	return 0;
-}
-
-static int efx_ethtool_set_tx_csum(struct net_device *net_dev, u32 enable)
-{
-	struct efx_nic *efx = netdev_priv(net_dev);
-	u32 features = efx->type->offload_features & NETIF_F_ALL_CSUM;
-
-	if (enable)
-		net_dev->features |= features;
-	else
-		net_dev->features &= ~features;
-
-	return 0;
-}
-
-static int efx_ethtool_set_rx_csum(struct net_device *net_dev, u32 enable)
-{
-	struct efx_nic *efx = netdev_priv(net_dev);
-
-	/* No way to stop the hardware doing the checks; we just
-	 * ignore the result.
-	 */
-	efx->rx_checksum_enabled = !!enable;
-
-	return 0;
-}
-
-static u32 efx_ethtool_get_rx_csum(struct net_device *net_dev)
-{
-	struct efx_nic *efx = netdev_priv(net_dev);
-
-	return efx->rx_checksum_enabled;
-}
-
-static int efx_ethtool_set_flags(struct net_device *net_dev, u32 data)
-{
-	struct efx_nic *efx = netdev_priv(net_dev);
-	u32 supported = (efx->type->offload_features &
-			 (ETH_FLAG_RXHASH | ETH_FLAG_NTUPLE));
-	int rc;
-
-	rc = ethtool_op_set_flags(net_dev, data, supported);
-	if (rc)
-		return rc;
-
-	if (!(data & ETH_FLAG_NTUPLE))
-		efx_filter_clear_rx(efx, EFX_FILTER_PRI_MANUAL);
-
-	return 0;
-}
-
 static void efx_ethtool_self_test(struct net_device *net_dev,
 				  struct ethtool_test *test, u64 *data)
 {
@@ -1070,22 +1012,10 @@ const struct ethtool_ops efx_ethtool_ops = {
 	.set_ringparam		= efx_ethtool_set_ringparam,
 	.get_pauseparam         = efx_ethtool_get_pauseparam,
 	.set_pauseparam         = efx_ethtool_set_pauseparam,
-	.get_rx_csum		= efx_ethtool_get_rx_csum,
-	.set_rx_csum		= efx_ethtool_set_rx_csum,
-	.get_tx_csum		= ethtool_op_get_tx_csum,
-	/* Need to enable/disable IPv6 too */
-	.set_tx_csum		= efx_ethtool_set_tx_csum,
-	.get_sg			= ethtool_op_get_sg,
-	.set_sg			= ethtool_op_set_sg,
-	.get_tso		= ethtool_op_get_tso,
-	/* Need to enable/disable TSO-IPv6 too */
-	.set_tso		= efx_ethtool_set_tso,
-	.get_flags		= ethtool_op_get_flags,
-	.set_flags		= efx_ethtool_set_flags,
 	.get_sset_count		= efx_ethtool_get_sset_count,
 	.self_test		= efx_ethtool_self_test,
 	.get_strings		= efx_ethtool_get_strings,
-	.phys_id		= efx_ethtool_phys_id,
+	.set_phys_id		= efx_ethtool_phys_id,
 	.get_ethtool_stats	= efx_ethtool_get_stats,
 	.get_wol                = efx_ethtool_get_wol,
 	.set_wol                = efx_ethtool_set_wol,

drivers/net/sfc/net_driver.h

@@ -681,7 +681,6 @@ struct efx_filter_state;
  * @port_inhibited: If set, the netif_carrier is always off. Hold the mac_lock
  * @port_initialized: Port initialized?
  * @net_dev: Operating system network device. Consider holding the rtnl lock
- * @rx_checksum_enabled: RX checksumming enabled
  * @stats_buffer: DMA buffer for statistics
  * @mac_op: MAC interface
  * @phy_type: PHY type
@@ -771,7 +770,6 @@ struct efx_nic {
 
 	bool port_initialized;
 	struct net_device *net_dev;
-	bool rx_checksum_enabled;
 
 	struct efx_buffer stats_buffer;
 

drivers/net/sfc/nic.c

@@ -850,7 +850,6 @@ efx_handle_rx_event(struct efx_channel *channel, const efx_qword_t *event)
 	unsigned expected_ptr;
 	bool rx_ev_pkt_ok, discard = false, checksummed;
 	struct efx_rx_queue *rx_queue;
-	struct efx_nic *efx = channel->efx;
 
 	/* Basic packet information */
 	rx_ev_byte_cnt = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_BYTE_CNT);
@@ -873,9 +872,8 @@ efx_handle_rx_event(struct efx_channel *channel, const efx_qword_t *event)
 		 * UDP/IP, then we can rely on the hardware checksum.
 		 */
 		checksummed =
-			likely(efx->rx_checksum_enabled) &&
-			(rx_ev_hdr_type == FSE_CZ_RX_EV_HDR_TYPE_IPV4V6_TCP ||
-			 rx_ev_hdr_type == FSE_CZ_RX_EV_HDR_TYPE_IPV4V6_UDP);
+			rx_ev_hdr_type == FSE_CZ_RX_EV_HDR_TYPE_IPV4V6_TCP ||
+			rx_ev_hdr_type == FSE_CZ_RX_EV_HDR_TYPE_IPV4V6_UDP;
 	} else {
 		efx_handle_rx_not_ok(rx_queue, event, &rx_ev_pkt_ok, &discard);
 		checksummed = false;

drivers/net/sfc/rx.c

@@ -605,6 +605,9 @@ void __efx_rx_packet(struct efx_channel *channel,
 		skb_record_rx_queue(skb, channel->channel);
 	}
 
+	if (unlikely(!(efx->net_dev->features & NETIF_F_RXCSUM)))
+		checksummed = false;
+
 	if (likely(checksummed || rx_buf->is_page)) {
 		efx_rx_packet_gro(channel, rx_buf, eh, checksummed);
 		return;

include/linux/ethtool.h

@@ -663,6 +663,22 @@ struct ethtool_rx_ntuple_list {
 	unsigned int		count;
 };
 
+/**
+ * enum ethtool_phys_id_state - indicator state for physical identification
+ * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated
+ * @ETHTOOL_ID_ACTIVE: Physical ID indicator should be activated
+ * @ETHTOOL_ID_ON: LED should be turned on (used iff %ETHTOOL_ID_ACTIVE
+ *	is not supported)
+ * @ETHTOOL_ID_OFF: LED should be turned off (used iff %ETHTOOL_ID_ACTIVE
+ *	is not supported)
+ */
+enum ethtool_phys_id_state {
+	ETHTOOL_ID_INACTIVE,
+	ETHTOOL_ID_ACTIVE,
+	ETHTOOL_ID_ON,
+	ETHTOOL_ID_OFF
+};
+
 struct net_device;
 
 /* Some generic methods drivers may use in their ethtool_ops */
@@ -683,63 +699,126 @@ void ethtool_ntuple_flush(struct net_device *dev);
 bool ethtool_invalid_flags(struct net_device *dev, u32 data, u32 supported);
 
 /**
- * &ethtool_ops - Alter and report network device settings
- * get_settings: Get device-specific settings
- * set_settings: Set device-specific settings
- * get_drvinfo: Report driver information
- * get_regs: Get device registers
- * get_wol: Report whether Wake-on-Lan is enabled
- * set_wol: Turn Wake-on-Lan on or off
- * get_msglevel: Report driver message level
- * set_msglevel: Set driver message level
- * nway_reset: Restart autonegotiation
- * get_link: Get link status
- * get_eeprom: Read data from the device EEPROM
- * set_eeprom: Write data to the device EEPROM
- * get_coalesce: Get interrupt coalescing parameters
- * set_coalesce: Set interrupt coalescing parameters
- * get_ringparam: Report ring sizes
- * set_ringparam: Set ring sizes
- * get_pauseparam: Report pause parameters
- * set_pauseparam: Set pause parameters
- * get_rx_csum: Report whether receive checksums are turned on or off
- * set_rx_csum: Turn receive checksum on or off
- * get_tx_csum: Report whether transmit checksums are turned on or off
- * set_tx_csum: Turn transmit checksums on or off
- * get_sg: Report whether scatter-gather is enabled
- * set_sg: Turn scatter-gather on or off
- * get_tso: Report whether TCP segmentation offload is enabled
- * set_tso: Turn TCP segmentation offload on or off
- * get_ufo: Report whether UDP fragmentation offload is enabled
- * set_ufo: Turn UDP fragmentation offload on or off
- * self_test: Run specified self-tests
- * get_strings: Return a set of strings that describe the requested objects
- * phys_id: Identify the device
- * get_stats: Return statistics about the device
- * get_flags: get 32-bit flags bitmap
- * set_flags: set 32-bit flags bitmap
- *
- * Description:
- *
- * get_settings:
- *	@get_settings is passed an &ethtool_cmd to fill in.  It returns
- *	an negative errno or zero.
- *
- * set_settings:
- *	@set_settings is passed an &ethtool_cmd and should attempt to set
- *	all the settings this device supports.  It may return an error value
- *	if something goes wrong (otherwise 0).
- *
- * get_eeprom:
+ * struct ethtool_ops - optional netdev operations
+ * @get_settings: Get various device settings including Ethernet link
+ *	settings.  Returns a negative error code or zero.
+ * @set_settings: Set various device settings including Ethernet link
+ *	settings.  Returns a negative error code or zero.
+ * @get_drvinfo: Report driver/device information.  Should only set the
+ *	@driver, @version, @fw_version and @bus_info fields.  If not
+ *	implemented, the @driver and @bus_info fields will be filled in
+ *	according to the netdev's parent device.
+ * @get_regs_len: Get buffer length required for @get_regs
+ * @get_regs: Get device registers
+ * @get_wol: Report whether Wake-on-Lan is enabled
+ * @set_wol: Turn Wake-on-Lan on or off.  Returns a negative error code
+ *	or zero.
+ * @get_msglevel: Report driver message level.  This should be the value
+ *	of the @msg_enable field used by netif logging functions.
+ * @set_msglevel: Set driver message level
+ * @nway_reset: Restart autonegotiation.  Returns a negative error code
+ *	or zero.
+ * @get_link: Report whether physical link is up.  Will only be called if
+ *	the netdev is up.  Should usually be set to ethtool_op_get_link(),
+ *	which uses netif_carrier_ok().
+ * @get_eeprom: Read data from the device EEPROM.
  *	Should fill in the magic field.  Don't need to check len for zero
  *	or wraparound.  Fill in the data argument with the eeprom values
  *	from offset to offset + len.  Update len to the amount read.
  *	Returns an error or zero.
- *
- * set_eeprom:
+ * @set_eeprom: Write data to the device EEPROM.
  *	Should validate the magic field.  Don't need to check len for zero
  *	or wraparound.  Update len to the amount written.  Returns an error
  *	or zero.
+ * @get_coalesce: Get interrupt coalescing parameters.  Returns a negative
+ *	error code or zero.
+ * @set_coalesce: Set interrupt coalescing parameters.  Returns a negative
+ *	error code or zero.
+ * @get_ringparam: Report ring sizes
+ * @set_ringparam: Set ring sizes.  Returns a negative error code or zero.
+ * @get_pauseparam: Report pause parameters
+ * @set_pauseparam: Set pause parameters.  Returns a negative error code
+ *	or zero.
+ * @get_rx_csum: Deprecated in favour of the netdev feature %NETIF_F_RXCSUM.
+ *	Report whether receive checksums are turned on or off.
+ * @set_rx_csum: Deprecated in favour of generic netdev features.  Turn
+ *	receive checksum on or off.  Returns a negative error code or zero.
+ * @get_tx_csum: Deprecated as redundant. Report whether transmit checksums
+ *	are turned on or off.
+ * @set_tx_csum: Deprecated in favour of generic netdev features.  Turn
+ *	transmit checksums on or off.  Returns a egative error code or zero.
+ * @get_sg: Deprecated as redundant.  Report whether scatter-gather is
+ *	enabled.  
+ * @set_sg: Deprecated in favour of generic netdev features.  Turn
+ *	scatter-gather on or off. Returns a negative error code or zero.
+ * @get_tso: Deprecated as redundant.  Report whether TCP segmentation
+ *	offload is enabled.
+ * @set_tso: Deprecated in favour of generic netdev features.  Turn TCP
+ *	segmentation offload on or off.  Returns a negative error code or zero.
+ * @self_test: Run specified self-tests
+ * @get_strings: Return a set of strings that describe the requested objects
+ * @set_phys_id: Identify the physical devices, e.g. by flashing an LED
+ *	attached to it.  The implementation may update the indicator
+ *	asynchronously or synchronously, but in either case it must return
+ *	quickly.  It is initially called with the argument %ETHTOOL_ID_ACTIVE,
+ *	and must either activate asynchronous updates or return -%EINVAL.
+ *	If it returns -%EINVAL then it will be called again at intervals with
+ *	argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of
+ *	the indicator accordingly.  Finally, it is called with the argument
+ *	%ETHTOOL_ID_INACTIVE and must deactivate the indicator.  Returns a
+ *	negative error code or zero.
+ * @phys_id: Deprecated in favour of @set_phys_id.
+ *	Identify the physical device, e.g. by flashing an LED
+ *	attached to it until interrupted by a signal or the given time
+ *	(in seconds) elapses.  If the given time is zero, use a default
+ *	time limit.  Returns a negative error code or zero.  Being
+ *	interrupted by a signal is not an error.
+ * @get_ethtool_stats: Return extended statistics about the device.
+ *	This is only useful if the device maintains statistics not
+ *	included in &struct rtnl_link_stats64.
+ * @begin: Function to be called before any other operation.  Returns a
+ *	negative error code or zero.
+ * @complete: Function to be called after any other operation except
+ *	@begin.  Will be called even if the other operation failed.
+ * @get_ufo: Deprecated as redundant.  Report whether UDP fragmentation
+ *	offload is enabled.
+ * @set_ufo: Deprecated in favour of generic netdev features.  Turn UDP
+ *	fragmentation offload on or off.  Returns a negative error code or zero.
+ * @get_flags: Deprecated as redundant.  Report features included in
+ *	&enum ethtool_flags that are enabled.  
+ * @set_flags: Deprecated in favour of generic netdev features.  Turn
+ *	features included in &enum ethtool_flags on or off.  Returns a
+ *	negative error code or zero.
+ * @get_priv_flags: Report driver-specific feature flags.
+ * @set_priv_flags: Set driver-specific feature flags.  Returns a negative
+ *	error code or zero.
+ * @get_sset_count: Get number of strings that @get_strings will write.
+ * @get_rxnfc: Get RX flow classification rules.  Returns a negative
+ *	error code or zero.
+ * @set_rxnfc: Set RX flow classification rules.  Returns a negative
+ *	error code or zero.
+ * @flash_device: Write a firmware image to device's flash memory.
+ *	Returns a negative error code or zero.
+ * @reset: Reset (part of) the device, as specified by a bitmask of
+ *	flags from &enum ethtool_reset_flags.  Returns a negative
+ *	error code or zero.
+ * @set_rx_ntuple: Set an RX n-tuple rule.  Returns a negative error code
+ *	or zero.
+ * @get_rx_ntuple: Deprecated.
+ * @get_rxfh_indir: Get the contents of the RX flow hash indirection table.
+ *	Returns a negative error code or zero.
+ * @set_rxfh_indir: Set the contents of the RX flow hash indirection table.
+ *	Returns a negative error code or zero.
+ *
+ * All operations are optional (i.e. the function pointer may be set
+ * to %NULL) and callers must take this into account.  Callers must
+ * hold the RTNL, except that for @get_drvinfo the caller may or may
+ * not hold the RTNL.
+ *
+ * See the structures used by these operations for further documentation.
+ *
+ * See &struct net_device and &struct net_device_ops for documentation
+ * of the generic netdev features interface.
  */
 struct ethtool_ops {
 	int	(*get_settings)(struct net_device *, struct ethtool_cmd *);
@@ -778,6 +857,7 @@ struct ethtool_ops {
 	int	(*set_tso)(struct net_device *, u32);
 	void	(*self_test)(struct net_device *, struct ethtool_test *, u64 *);
 	void	(*get_strings)(struct net_device *, u32 stringset, u8 *);
+	int	(*set_phys_id)(struct net_device *, enum ethtool_phys_id_state);
 	int	(*phys_id)(struct net_device *, u32);
 	void	(*get_ethtool_stats)(struct net_device *,
 				     struct ethtool_stats *, u64 *);

net/core/ethtool.c

@@ -21,6 +21,8 @@
 #include <linux/uaccess.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
+#include <linux/rtnetlink.h>
+#include <linux/sched.h>
 
 /*
  * Some useful ethtool_ops methods that're device independent.
@@ -1618,14 +1620,63 @@ out:
 static int ethtool_phys_id(struct net_device *dev, void __user *useraddr)
 {
 	struct ethtool_value id;
+	static bool busy;
+	int rc;
 
-	if (!dev->ethtool_ops->phys_id)
+	if (!dev->ethtool_ops->set_phys_id && !dev->ethtool_ops->phys_id)
 		return -EOPNOTSUPP;
 
+	if (busy)
+		return -EBUSY;
+
 	if (copy_from_user(&id, useraddr, sizeof(id)))
 		return -EFAULT;
 
-	return dev->ethtool_ops->phys_id(dev, id.data);
+	if (!dev->ethtool_ops->set_phys_id)
+		/* Do it the old way */
+		return dev->ethtool_ops->phys_id(dev, id.data);
+
+	rc = dev->ethtool_ops->set_phys_id(dev, ETHTOOL_ID_ACTIVE);
+	if (rc && rc != -EINVAL)
+		return rc;
+
+	/* Drop the RTNL lock while waiting, but prevent reentry or
+	 * removal of the device.
+	 */
+	busy = true;
+	dev_hold(dev);
+	rtnl_unlock();
+
+	if (rc == 0) {
+		/* Driver will handle this itself */
+		schedule_timeout_interruptible(
+			id.data ? id.data : MAX_SCHEDULE_TIMEOUT);
+	} else {
+		/* Driver expects to be called periodically */
+		do {
+			rtnl_lock();
+			rc = dev->ethtool_ops->set_phys_id(dev, ETHTOOL_ID_ON);
+			rtnl_unlock();
+			if (rc)
+				break;
+			schedule_timeout_interruptible(HZ / 2);
+
+			rtnl_lock();
+			rc = dev->ethtool_ops->set_phys_id(dev, ETHTOOL_ID_OFF);
+			rtnl_unlock();
+			if (rc)
+				break;
+			schedule_timeout_interruptible(HZ / 2);
+		} while (!signal_pending(current) &&
+			 (id.data == 0 || --id.data != 0));
+	}
+
+	rtnl_lock();
+	dev_put(dev);
+	busy = false;
+
+	(void)dev->ethtool_ops->set_phys_id(dev, ETHTOOL_ID_INACTIVE);
+	return rc;
 }
 
 static int ethtool_get_stats(struct net_device *dev, void __user *useraddr)