Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	Documentation/networking/ip-sysctl.txt
	drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c

Both conflicts were simply overlapping context.

A build fix for qlcnic is in here too, simply removing the added
devinit annotations which no longer exist.

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/DocBook/media/v4l/driver.xml

@@ -116,7 +116,7 @@ my_suspend              (struct pci_dev *               pci_dev,
 	return 0; /* a negative value on error, 0 on success. */
 }
 
-static void __devexit
+static void
 my_remove               (struct pci_dev *               pci_dev)
 {
 	my_device *my = pci_get_drvdata (pci_dev);
@@ -124,7 +124,7 @@ my_remove               (struct pci_dev *               pci_dev)
 	/* Describe me. */
 }
 
-static int __devinit
+static int
 my_probe                (struct pci_dev *               pci_dev,
 			 const struct pci_device_id *   pci_id)
 {
@@ -157,7 +157,7 @@ my_pci_driver = {
 	.id_table = my_pci_device_ids,
 
 	.probe    = my_probe,
-	.remove   = __devexit_p (my_remove),
+	.remove   = my_remove,
 
 	/* Power management functions. */
 	.suspend  = my_suspend,

Documentation/PCI/pci-iov-howto.txt

@@ -76,7 +76,7 @@ To notify SR-IOV core of Virtual Function Migration:
 
 Following piece of code illustrates the usage of the SR-IOV API.
 
-static int __devinit dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	pci_enable_sriov(dev, NR_VIRTFN);
 
@@ -85,7 +85,7 @@ static int __devinit dev_probe(struct pci_dev *dev, const struct pci_device_id *
 	return 0;
 }
 
-static void __devexit dev_remove(struct pci_dev *dev)
+static void dev_remove(struct pci_dev *dev)
 {
 	pci_disable_sriov(dev);
 
@@ -131,7 +131,7 @@ static struct pci_driver dev_driver = {
 	.name =		"SR-IOV Physical Function driver",
 	.id_table =	dev_id_table,
 	.probe =	dev_probe,
-	.remove =	__devexit_p(dev_remove),
+	.remove =	dev_remove,
 	.suspend =	dev_suspend,
 	.resume =	dev_resume,
 	.shutdown =	dev_shutdown,

Documentation/PCI/pci.txt

@@ -183,12 +183,6 @@ Please mark the initialization and cleanup functions where appropriate
 			initializes.
 	__exit		Exit code. Ignored for non-modular drivers.
 
-
-	__devinit	Device initialization code.
-			Identical to __init if the kernel is not compiled
-			with CONFIG_HOTPLUG, normal function otherwise.
-	__devexit	The same for __exit.
-
 Tips on when/where to use the above attributes:
 	o The module_init()/module_exit() functions (and all
 	  initialization functions called _only_ from these)
@@ -196,20 +190,6 @@ Tips on when/where to use the above attributes:
 
 	o Do not mark the struct pci_driver.
 
-	o The ID table array should be marked __devinitconst; this is done
-	  automatically if the table is declared with DEFINE_PCI_DEVICE_TABLE().
-
-	o The probe() and remove() functions should be marked __devinit
-	  and __devexit respectively.  All initialization functions
-	  exclusively called by the probe() routine, can be marked __devinit.
-	  Ditto for remove() and __devexit.
-
-	o If mydriver_remove() is marked with __devexit(), then all address
-	  references to mydriver_remove must use __devexit_p(mydriver_remove)
-	  (in the struct pci_driver declaration for example).
-	  __devexit_p() will generate the function name _or_ NULL if the
-	  function will be discarded.  For an example, see drivers/net/tg3.c.
-
 	o Do NOT mark a function if you are not sure which mark to use.
 	  Better to not mark the function than mark the function wrong.
 

Documentation/acpi/enumeration.txt

@@ -185,7 +185,7 @@ input driver:
 			.acpi_match_table  ACPI_PTR(mpu3050_acpi_match),
 		},
 		.probe		= mpu3050_probe,
-		.remove		= __devexit_p(mpu3050_remove),
+		.remove		= mpu3050_remove,
 		.id_table	= mpu3050_ids,
 	};
 

Documentation/devicetree/bindings/clock/imx23-clock.txt

@@ -60,11 +60,6 @@ clks: clkctrl@80040000 {
 	compatible = "fsl,imx23-clkctrl";
 	reg = <0x80040000 0x2000>;
 	#clock-cells = <1>;
-	clock-output-names =
-		...
-		"uart",		/* 32 */
-		...
-		"end_of_list";
 };
 
 auart0: serial@8006c000 {

Documentation/devicetree/bindings/clock/imx25-clock.txt

@@ -146,10 +146,6 @@ clks: ccm@53f80000 {
 	compatible = "fsl,imx25-ccm";
 	reg = <0x53f80000 0x4000>;
 	interrupts = <31>;
-	clock-output-names = ...
-			"uart_ipg",
-			"uart_serial",
-			...;
 };
 
 uart1: serial@43f90000 {

Documentation/devicetree/bindings/clock/imx28-clock.txt

@@ -83,11 +83,6 @@ clks: clkctrl@80040000 {
 	compatible = "fsl,imx28-clkctrl";
 	reg = <0x80040000 0x2000>;
 	#clock-cells = <1>;
-	clock-output-names =
-		...
-		"uart",		/* 45 */
-		...
-		"end_of_list";
 };
 
 auart0: serial@8006a000 {

Documentation/devicetree/bindings/clock/imx6q-clock.txt

@@ -211,10 +211,6 @@ clks: ccm@020c4000 {
 	reg = <0x020c4000 0x4000>;
 	interrupts = <0 87 0x04 0 88 0x04>;
 	#clock-cells = <1>;
-	clock-output-names = ...
-			     "uart_ipg",
-			     "uart_serial",
-			     ...;
 };
 
 uart1: serial@02020000 {

Documentation/devicetree/bindings/gpio/gpio-poweroff.txt

@@ -1,4 +1,19 @@
-GPIO line that should be set high/low to power off a device
+Driver a GPIO line that can be used to turn the power off.
+
+The driver supports both level triggered and edge triggered power off.
+At driver load time, the driver will request the given gpio line and
+install a pm_power_off handler. If the optional properties 'input' is
+not found, the GPIO line will be driven in the inactive
+state. Otherwise its configured as an input.
+
+When the pm_power_off is called, the gpio is configured as an output,
+and drive active, so triggering a level triggered power off
+condition. This will also cause an inactive->active edge condition, so
+triggering positive edge triggered power off. After a delay of 100ms,
+the GPIO is set to inactive, thus causing an active->inactive edge,
+triggering negative edge triggered power off. After another 100ms
+delay the GPIO is driver active again. If the power is still on and
+the CPU still running after a 3000ms delay, a WARN_ON(1) is emitted.
 
 Required properties:
 - compatible : should be "gpio-poweroff".
@@ -13,10 +28,9 @@ Optional properties:
   property is not specified, the GPIO is initialized as an output in its
   inactive state.
 
-
 Examples:
 
 gpio-poweroff {
 	compatible = "gpio-poweroff";
-	gpios = <&gpio 4 0>; /* GPIO 4 Active Low */
+	gpios = <&gpio 4 0>;
 };

Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt

@@ -0,0 +1,47 @@
+CSR SiRFprimaII pinmux controller
+
+Required properties:
+- compatible	: "sirf,prima2-pinctrl"
+- reg		: Address range of the pinctrl registers
+- interrupts    : Interrupts used by every GPIO group
+- gpio-controller : Indicates this device is a GPIO controller
+- interrupt-controller  : Marks the device node as an interrupt controller
+Optional properties:
+- sirf,pullups : if n-th bit of m-th bank is set, set a pullup on GPIO-n of bank m
+- sirf,pulldowns : if n-th bit of m-th bank is set, set a pulldown on GPIO-n of bank m
+
+Please refer to pinctrl-bindings.txt in this directory for details of the common
+pinctrl bindings used by client devices.
+
+SiRFprimaII's pinmux nodes act as a container for an abitrary number of subnodes.
+Each of these subnodes represents some desired configuration for a group of pins.
+
+Required subnode-properties:
+- sirf,pins : An array of strings. Each string contains the name of a group.
+- sirf,function: A string containing the name of the function to mux to the
+  group.
+
+  Valid values for group and function names can be found from looking at the
+  group and function arrays in driver files:
+  drivers/pinctrl/pinctrl-sirf.c
+
+For example, pinctrl might have subnodes like the following:
+ uart2_pins_a: uart2@0 {
+         uart {
+                 sirf,pins = "uart2grp";
+                 sirf,function = "uart2";
+         };
+ };
+ uart2_noflow_pins_a: uart2@1 {
+         uart {
+                 sirf,pins = "uart2_nostreamctrlgrp";
+                 sirf,function = "uart2_nostreamctrl";
+         };
+ };
+
+For a specific board, if it wants to use uart2 without hardware flow control,
+it can add the following to its board-specific .dts file.
+uart2: uart@0xb0070000 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_noflow_pins_a>;
+}

Documentation/devicetree/bindings/watchdog/twl4030-wdt.txt

@@ -0,0 +1,10 @@
+Device tree bindings for twl4030-wdt driver (TWL4030 watchdog)
+
+Required properties:
+	compatible = "ti,twl4030-wdt";
+
+Example:
+
+watchdog {
+	compatible = "ti,twl4030-wdt";
+};

Documentation/i2c/instantiating-devices

@@ -91,7 +91,7 @@ Example (from the nxp OHCI driver):
 
 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
 
-static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
+static int usb_hcd_nxp_probe(struct platform_device *pdev)
 {
 	(...)
 	struct i2c_adapter *i2c_adap;

Documentation/networking/ip-sysctl.txt

@@ -36,7 +36,7 @@ neigh/default/unres_qlen_bytes - INTEGER
 	The maximum number of bytes which may be used by packets
 	queued for each	unresolved address by other network layers.
 	(added in linux 3.3)
-	Seting negative value is meaningless and will retrun error.
+	Setting negative value is meaningless and will return error.
 	Default: 65536 Bytes(64KB)
 
 neigh/default/unres_qlen - INTEGER
@@ -504,7 +504,7 @@ tcp_fastopen - INTEGER
 tcp_syn_retries - INTEGER
 	Number of times initial SYNs for an active TCP connection attempt
 	will be retransmitted. Should not be higher than 255. Default value
-	is 6, which corresponds to 63seconds till the last restransmission
+	is 6, which corresponds to 63seconds till the last retransmission
 	with the current initial RTO of 1second. With this the final timeout
 	for an active TCP connection attempt will happen after 127seconds.
 
@@ -1332,6 +1332,12 @@ force_tllao - BOOLEAN
 	race condition where the sender deletes the cached link-layer address
 	prior to receiving a response to a previous solicitation."
 
+ndisc_notify - BOOLEAN
+	Define mode for notification of address and device changes.
+	0 - (default): do nothing
+	1 - Generate unsolicited neighbour advertisements when device is brought
+	    up or hardware address changes.
+
 icmp/*:
 ratelimit - INTEGER
 	Limit the maximal rates for sending ICMPv6 packets.
@@ -1531,7 +1537,7 @@ cookie_hmac_alg - STRING
 	* sha1
 	* none
 	Ability to assign md5 or sha1 as the selected alg is predicated on the
-	configuarion of those algorithms at build time (CONFIG_CRYPTO_MD5 and
+	configuration of those algorithms at build time (CONFIG_CRYPTO_MD5 and
 	CONFIG_CRYPTO_SHA1).
 
 	Default: Dependent on configuration.  MD5 if available, else SHA1 if
@@ -1549,7 +1555,7 @@ rcvbuf_policy - INTEGER
 	blocking.
 
 	1: rcvbuf space is per association
-	0: recbuf space is per socket
+	0: rcvbuf space is per socket
 
 	Default: 0
 

Documentation/power/runtime_pm.txt

@@ -642,12 +642,13 @@ out the following operations:
   * During system suspend it calls pm_runtime_get_noresume() and
     pm_runtime_barrier() for every device right before executing the
     subsystem-level .suspend() callback for it.  In addition to that it calls
-    pm_runtime_disable() for every device right after executing the
-    subsystem-level .suspend() callback for it.
+    __pm_runtime_disable() with 'false' as the second argument for every device
+    right before executing the subsystem-level .suspend_late() callback for it.
 
   * During system resume it calls pm_runtime_enable() and pm_runtime_put_sync()
-    for every device right before and right after executing the subsystem-level
-    .resume() callback for it, respectively.
+    for every device right after executing the subsystem-level .resume_early()
+    callback and right after executing the subsystem-level .resume() callback
+    for it, respectively.
 
 7. Generic subsystem callbacks
 

Documentation/rpmsg.txt

@@ -236,7 +236,7 @@ static int rpmsg_sample_probe(struct rpmsg_channel *rpdev)
 	return 0;
 }
 
-static void __devexit rpmsg_sample_remove(struct rpmsg_channel *rpdev)
+static void rpmsg_sample_remove(struct rpmsg_channel *rpdev)
 {
 	dev_info(&rpdev->dev, "rpmsg sample client driver is removed\n");
 }
@@ -253,7 +253,7 @@ static struct rpmsg_driver rpmsg_sample_client = {
 	.id_table	= rpmsg_driver_sample_id_table,
 	.probe		= rpmsg_sample_probe,
 	.callback	= rpmsg_sample_cb,
-	.remove		= __devexit_p(rpmsg_sample_remove),
+	.remove		= rpmsg_sample_remove,
 };
 
 static int __init init(void)

Documentation/spi/spi-summary

@@ -345,7 +345,7 @@ SPI protocol drivers somewhat resemble platform device drivers:
 		},
 
 		.probe		= CHIP_probe,
-		.remove		= __devexit_p(CHIP_remove),
+		.remove		= CHIP_remove,
 		.suspend	= CHIP_suspend,
 		.resume		= CHIP_resume,
 	};
@@ -355,7 +355,7 @@ device whose board_info gave a modalias of "CHIP".  Your probe() code
 might look like this unless you're creating a device which is managing
 a bus (appearing under /sys/class/spi_master).
 
-	static int __devinit CHIP_probe(struct spi_device *spi)
+	static int CHIP_probe(struct spi_device *spi)
 	{
 		struct CHIP			*chip;
 		struct CHIP_platform_data	*pdata;

Documentation/sysctl/kernel.txt

@@ -38,6 +38,7 @@ show up in /proc/sys/kernel:
 - l2cr                        [ PPC only ]
 - modprobe                    ==> Documentation/debugging-modules.txt
 - modules_disabled
+- msg_next_id		      [ sysv ipc ]
 - msgmax
 - msgmnb
 - msgmni
@@ -62,7 +63,9 @@ show up in /proc/sys/kernel:
 - rtsig-max
 - rtsig-nr
 - sem
+- sem_next_id		      [ sysv ipc ]
 - sg-big-buff                 [ generic SCSI device (sg) ]
+- shm_next_id		      [ sysv ipc ]
 - shm_rmid_forced
 - shmall
 - shmmax                      [ sysv ipc ]
@@ -320,6 +323,22 @@ to false.
 
 ==============================================================
 
+msg_next_id, sem_next_id, and shm_next_id:
+
+These three toggles allows to specify desired id for next allocated IPC
+object: message, semaphore or shared memory respectively.
+
+By default they are equal to -1, which means generic allocation logic.
+Possible values to set are in range {0..INT_MAX}.
+
+Notes:
+1) kernel doesn't guarantee, that new object will have desired id. So,
+it's up to userspace, how to handle an object with "wrong" id.
+2) Toggle with non-default value will be set back to -1 by kernel after
+successful IPC object allocation.
+
+==============================================================
+
 nmi_watchdog:
 
 Enables/Disables the NMI watchdog on x86 systems. When the value is
@@ -542,6 +561,19 @@ are doing anyway :)
 
 ==============================================================
 
+shmall:
+
+This parameter sets the total amount of shared memory pages that
+can be used system wide. Hence, SHMALL should always be at least
+ceil(shmmax/PAGE_SIZE).
+
+If you are not sure what the default PAGE_SIZE is on your Linux
+system, you can run the following command:
+
+# getconf PAGE_SIZE
+
+==============================================================
+
 shmmax:
 
 This value can be used to query and set the run time limit

Documentation/video4linux/v4l2-framework.txt

@@ -174,8 +174,7 @@ The recommended approach is as follows:
 
 static atomic_t drv_instance = ATOMIC_INIT(0);
 
-static int __devinit drv_probe(struct pci_dev *pdev,
-				const struct pci_device_id *pci_id)
+static int drv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 {
 	...
 	state->instance = atomic_inc_return(&drv_instance) - 1;

Documentation/zh_CN/video4linux/v4l2-framework.txt

@@ -182,8 +182,7 @@ int iterate(void *p)
 
 static atomic_t drv_instance = ATOMIC_INIT(0);
 
-static int __devinit drv_probe(struct pci_dev *pdev,
-				const struct pci_device_id *pci_id)
+static int drv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 {
 	...
 	state->instance = atomic_inc_return(&drv_instance) - 1;

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
 NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*

arch/alpha/include/asm/parport.h

@@ -9,8 +9,8 @@
 #ifndef _ASM_AXP_PARPORT_H
 #define _ASM_AXP_PARPORT_H 1
 
-static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
-static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+static int parport_pc_find_isa_ports (int autoirq, int autodma);
+static int parport_pc_find_nonpci_ports (int autoirq, int autodma)
 {
 	return parport_pc_find_isa_ports (autoirq, autodma);
 }

arch/alpha/kernel/pci.c

@@ -59,13 +59,13 @@ struct pci_controller *pci_isa_hose;
  * Quirks.
  */
 
-static void __devinit quirk_isa_bridge(struct pci_dev *dev)
+static void quirk_isa_bridge(struct pci_dev *dev)
 {
 	dev->class = PCI_CLASS_BRIDGE_ISA << 8;
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_isa_bridge);
 
-static void __devinit quirk_cypress(struct pci_dev *dev)
+static void quirk_cypress(struct pci_dev *dev)
 {
 	/* The Notorious Cy82C693 chip.  */
 
@@ -104,7 +104,7 @@ static void __devinit quirk_cypress(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, quirk_cypress);
 
 /* Called for each device after PCI setup is done. */
-static void __devinit pcibios_fixup_final(struct pci_dev *dev)
+static void pcibios_fixup_final(struct pci_dev *dev)
 {
 	unsigned int class = dev->class >> 8;
 
@@ -198,8 +198,7 @@ subsys_initcall(pcibios_init);
 #ifdef ALPHA_RESTORE_SRM_SETUP
 static struct pdev_srm_saved_conf *srm_saved_configs;
 
-void __devinit
-pdev_save_srm_config(struct pci_dev *dev)
+void pdev_save_srm_config(struct pci_dev *dev)
 {
 	struct pdev_srm_saved_conf *tmp;
 	static int printed = 0;
@@ -241,8 +240,7 @@ pci_restore_srm_config(void)
 }
 #endif
 
-void __devinit
-pcibios_fixup_bus(struct pci_bus *bus)
+void pcibios_fixup_bus(struct pci_bus *bus)
 {
 	struct pci_dev *dev = bus->self;
 

arch/alpha/kernel/smp.c

@@ -68,7 +68,7 @@ enum ipi_message_type {
 };
 
 /* Set to a secondary's cpuid when it comes online.  */
-static int smp_secondary_alive __devinitdata = 0;
+static int smp_secondary_alive = 0;
 
 int smp_num_probed;		/* Internal processor count */
 int smp_num_cpus = 1;		/* Number that came online.  */
@@ -172,7 +172,7 @@ smp_callin(void)
 }
 
 /* Wait until hwrpb->txrdy is clear for cpu.  Return -1 on timeout.  */
-static int __devinit
+static int
 wait_for_txrdy (unsigned long cpumask)
 {
 	unsigned long timeout;
@@ -468,7 +468,7 @@ smp_prepare_cpus(unsigned int max_cpus)
 	smp_num_cpus = smp_num_probed;
 }
 
-void __devinit
+void
 smp_prepare_boot_cpu(void)
 {
 }

arch/alpha/kernel/sys_titan.c

@@ -303,7 +303,7 @@ titan_late_init(void)
 
 }
 
-static int __devinit
+static int
 titan_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	u8 intline;

arch/arm/Kconfig

@@ -371,7 +371,6 @@ config ARCH_CNS3XXX
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
 	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_USES_GETTIMEOFFSET
 	select AUTO_ZRELADDR
 	select CLKDEV_LOOKUP
 	select COMMON_CLK
@@ -1230,6 +1229,7 @@ config ARM_ERRATA_430973
 config ARM_ERRATA_458693
 	bool "ARM errata: Processor deadlock when a false hazard is created"
 	depends on CPU_V7
+	depends on !ARCH_MULTIPLATFORM
 	help
 	  This option enables the workaround for the 458693 Cortex-A8 (r2p0)
 	  erratum. For very specific sequences of memory operations, it is
@@ -1243,6 +1243,7 @@ config ARM_ERRATA_458693
 config ARM_ERRATA_460075
 	bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
 	depends on CPU_V7
+	depends on !ARCH_MULTIPLATFORM
 	help
 	  This option enables the workaround for the 460075 Cortex-A8 (r2p0)
 	  erratum. Any asynchronous access to the L2 cache may encounter a
@@ -1255,6 +1256,7 @@ config ARM_ERRATA_460075
 config ARM_ERRATA_742230
 	bool "ARM errata: DMB operation may be faulty"
 	depends on CPU_V7 && SMP
+	depends on !ARCH_MULTIPLATFORM
 	help
 	  This option enables the workaround for the 742230 Cortex-A9
 	  (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
@@ -1267,6 +1269,7 @@ config ARM_ERRATA_742230
 config ARM_ERRATA_742231
 	bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
 	depends on CPU_V7 && SMP
+	depends on !ARCH_MULTIPLATFORM
 	help
 	  This option enables the workaround for the 742231 Cortex-A9
 	  (r2p0..r2p2) erratum. Under certain conditions, specific to the
@@ -1317,6 +1320,7 @@ config PL310_ERRATA_727915
 config ARM_ERRATA_743622
 	bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
 	depends on CPU_V7
+	depends on !ARCH_MULTIPLATFORM
 	help
 	  This option enables the workaround for the 743622 Cortex-A9
 	  (r2p*) erratum. Under very rare conditions, a faulty
@@ -1330,6 +1334,7 @@ config ARM_ERRATA_743622
 config ARM_ERRATA_751472
 	bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
 	depends on CPU_V7
+	depends on !ARCH_MULTIPLATFORM
 	help
 	  This option enables the workaround for the 751472 Cortex-A9 (prior
 	  to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the

arch/arm/boot/dts/Makefile

@@ -155,6 +155,7 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
 dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
 
 targets += dtbs
+targets += $(dtb-y)
 endif
 
 # *.dtb used to be generated in the directory above. Clean out the

arch/arm/boot/dts/armada-370-xp.dtsi

@@ -50,17 +50,19 @@
 		ranges;
 
 		serial@d0012000 {
-				compatible = "ns16550";
+				compatible = "snps,dw-apb-uart";
 				reg = <0xd0012000 0x100>;
 				reg-shift = <2>;
 				interrupts = <41>;
+				reg-io-width = <4>;
 				status = "disabled";
 		};
 		serial@d0012100 {
-				compatible = "ns16550";
+				compatible = "snps,dw-apb-uart";
 				reg = <0xd0012100 0x100>;
 				reg-shift = <2>;
 				interrupts = <42>;
+				reg-io-width = <4>;
 				status = "disabled";
 		};
 

arch/arm/boot/dts/armada-xp-mv78230.dtsi

@@ -34,7 +34,14 @@
 		reg = <0>;
 		clocks = <&cpuclk 0>;
 	    };
-	}
+
+	    cpu@1 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <1>;
+		clocks = <&cpuclk 1>;
+	    };
+	};
 
 	soc {
 		pinctrl {

arch/arm/boot/dts/armada-xp-mv78260.dtsi

@@ -85,5 +85,13 @@
 			#interrupts-cells = <2>;
 			interrupts = <24>;
 		};
+
+		ethernet@d0034000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0xd0034000 0x2500>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+		};
 	};
 };

arch/arm/boot/dts/armada-xp-mv78460.dtsi

@@ -100,5 +100,13 @@
 			#interrupts-cells = <2>;
 			interrupts = <24>;
 		};
+
+		ethernet@d0034000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0xd0034000 0x2500>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+		};
 	};
  };

arch/arm/boot/dts/armada-xp.dtsi

@@ -42,17 +42,19 @@
 
 	soc {
 		serial@d0012200 {
-				compatible = "ns16550";
+				compatible = "snps,dw-apb-uart";
 				reg = <0xd0012200 0x100>;
 				reg-shift = <2>;
 				interrupts = <43>;
+				reg-io-width = <4>;
 				status = "disabled";
 		};
 		serial@d0012300 {
-				compatible = "ns16550";
+				compatible = "snps,dw-apb-uart";
 				reg = <0xd0012300 0x100>;
 				reg-shift = <2>;
 				interrupts = <44>;
+				reg-io-width = <4>;
 				status = "disabled";
 		};
 
@@ -93,14 +95,6 @@
 				status = "disabled";
 		};
 
-		ethernet@d0034000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0xd0034000 0x2500>;
-				interrupts = <14>;
-				clocks = <&gateclk 1>;
-				status = "disabled";
-		};
-
 		xor@d0060900 {
 			compatible = "marvell,orion-xor";
 			reg = <0xd0060900 0x100

arch/arm/boot/dts/dbx5x0.dtsi

@@ -170,7 +170,9 @@
 			gpio-bank = <8>;
 		};
 
-		pinctrl {
+		pinctrl@80157000 {
+			// This is actually the PRCMU base address
+			reg = <0x80157000 0x2000>;
 			compatible = "stericsson,nmk_pinctrl";
 		};
 

arch/arm/boot/dts/dove.dtsi

@@ -117,6 +117,7 @@
 		pinctrl: pinctrl@d0200 {
 			compatible = "marvell,dove-pinctrl";
 			reg = <0xd0200 0x10>;
+			clocks = <&gate_clk 22>;
 		};
 
 		spi0: spi@10600 {

arch/arm/boot/dts/ecx-2000.dts

@@ -32,6 +32,7 @@
 
 		cpu@0 {
 			compatible = "arm,cortex-a15";
+			device_type = "cpu";
 			reg = <0>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
@@ -39,6 +40,7 @@
 
 		cpu@1 {
 			compatible = "arm,cortex-a15";
+			device_type = "cpu";
 			reg = <1>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
@@ -46,6 +48,7 @@
 
 		cpu@2 {
 			compatible = "arm,cortex-a15";
+			device_type = "cpu";
 			reg = <2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
@@ -53,6 +56,7 @@
 
 		cpu@3 {
 			compatible = "arm,cortex-a15";
+			device_type = "cpu";
 			reg = <3>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";

arch/arm/boot/dts/exynos4210-smdkv310.dts

@@ -26,7 +26,7 @@
 	};
 
 	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
 	};
 
 	sdhci@12530000 {

arch/arm/boot/dts/exynos5250.dtsi

@@ -574,7 +574,7 @@
 
 	hdmi {
 		compatible = "samsung,exynos5-hdmi";
-		reg = <0x14530000 0x100000>;
+		reg = <0x14530000 0x70000>;
 		interrupts = <0 95 0>;
 	};
 

arch/arm/boot/dts/exynos5440-ssdk5440.dts

@@ -21,7 +21,7 @@
 	};
 
 	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC2,115200 init=/linuxrc";
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC0,115200 init=/linuxrc";
 	};
 
 	spi {

arch/arm/boot/dts/highbank.dts

@@ -30,33 +30,37 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu@900 {
 			compatible = "arm,cortex-a9";
-			reg = <0>;
+			device_type = "cpu";
+			reg = <0x900>;
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
 		};
 
-		cpu@1 {
+		cpu@901 {
 			compatible = "arm,cortex-a9";
-			reg = <1>;
+			device_type = "cpu";
+			reg = <0x901>;
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
 		};
 
-		cpu@2 {
+		cpu@902 {
 			compatible = "arm,cortex-a9";
-			reg = <2>;
+			device_type = "cpu";
+			reg = <0x902>;
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
 		};
 
-		cpu@3 {
+		cpu@903 {
 			compatible = "arm,cortex-a9";
-			reg = <3>;
+			device_type = "cpu";
+			reg = <0x903>;
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";

arch/arm/boot/dts/imx23-olinuxino.dts

@@ -39,17 +39,17 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
+						0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
 					fsl,pull-up = <0>;
 				};
 
-				led_pin_gpio0_17: led_gpio0_17@0 {
+				led_pin_gpio2_1: led_gpio2_1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
+						0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -110,7 +110,7 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio0_17>;
+		pinctrl-0 = <&led_pin_gpio2_1>;
 
 		user {
 			label = "green";

arch/arm/boot/dts/imx31-bug.dts

@@ -14,7 +14,7 @@
 
 / {
 	model = "Buglabs i.MX31 Bug 1.x";
-	compatible = "fsl,imx31-bug", "fsl,imx31";
+	compatible = "buglabs,imx31-bug", "fsl,imx31";
 
 	memory {
 		reg = <0x80000000 0x8000000>; /* 128M */

arch/arm/boot/dts/imx53.dtsi

@@ -492,7 +492,7 @@
 				compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
 				reg = <0x53fcc000 0x4000>;
 				interrupts = <83>;
-				clocks = <&clks 158>, <&clks 157>;
+				clocks = <&clks 87>, <&clks 86>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};

arch/arm/boot/dts/kirkwood-6282.dtsi

@@ -39,6 +39,7 @@
 			#size-cells = <0>;
 			interrupts = <32>;
 			clock-frequency = <100000>;
+			clocks = <&gate_clk 7>;
 			status = "disabled";
 		};
 	};

arch/arm/boot/dts/kirkwood-topkick.dts

@@ -82,4 +82,21 @@
 			gpios = <&gpio1 16 1>;
 		};
 	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sata0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 4 0>;
+		};
+	};
 };

arch/arm/boot/dts/kirkwood.dtsi

@@ -144,6 +144,7 @@
 			compatible = "marvell,orion-ehci";
 			reg = <0x50000 0x1000>;
 			interrupts = <19>;
+			clocks = <&gate_clk 3>;
 			status = "okay";
 		};
 

arch/arm/boot/dts/twl4030.dtsi

@@ -19,6 +19,10 @@
 		interrupts = <11>;
 	};
 
+	watchdog {
+		compatible = "ti,twl4030-wdt";
+	};
+
 	vdac: regulator-vdac {
 		compatible = "ti,twl4030-vdac";
 		regulator-min-microvolt = <1800000>;

arch/arm/common/sa1111.c

@@ -686,8 +686,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
  *	%-EINVAL	no platform data passed
  *	%0		successful.
  */
-static int __devinit
-__sa1111_probe(struct device *me, struct resource *mem, int irq)
+static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
 {
 	struct sa1111_platform_data *pd = me->platform_data;
 	struct sa1111 *sachip;
@@ -1011,7 +1010,7 @@ static int sa1111_resume(struct platform_device *dev)
 #define sa1111_resume  NULL
 #endif
 
-static int __devinit sa1111_probe(struct platform_device *pdev)
+static int sa1111_probe(struct platform_device *pdev)
 {
 	struct resource *mem;
 	int irq;

arch/arm/common/scoop.c

@@ -176,7 +176,7 @@ static int scoop_resume(struct platform_device *dev)
 #define scoop_resume	NULL
 #endif
 
-static int __devinit scoop_probe(struct platform_device *pdev)
+static int scoop_probe(struct platform_device *pdev)
 {
 	struct scoop_dev *devptr;
 	struct scoop_config *inf;
@@ -243,7 +243,7 @@ err_ioremap:
 	return ret;
 }
 
-static int __devexit scoop_remove(struct platform_device *pdev)
+static int scoop_remove(struct platform_device *pdev)
 {
 	struct scoop_dev *sdev = platform_get_drvdata(pdev);
 	int ret;
@@ -268,7 +268,7 @@ static int __devexit scoop_remove(struct platform_device *pdev)
 
 static struct platform_driver scoop_driver = {
 	.probe		= scoop_probe,
-	.remove		= __devexit_p(scoop_remove),
+	.remove		= scoop_remove,
 	.suspend	= scoop_suspend,
 	.resume		= scoop_resume,
 	.driver		= {

arch/arm/common/vic.c

@@ -206,6 +206,7 @@ static void __init vic_register(void __iomem *base, unsigned int irq,
 				struct device_node *node)
 {
 	struct vic_device *v;
+	int i;
 
 	if (vic_id >= ARRAY_SIZE(vic_devices)) {
 		printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
@@ -220,6 +221,10 @@ static void __init vic_register(void __iomem *base, unsigned int irq,
 	vic_id++;
 	v->domain = irq_domain_add_simple(node, fls(valid_sources), irq,
 					  &vic_irqdomain_ops, v);
+	/* create an IRQ mapping for each valid IRQ */
+	for (i = 0; i < fls(valid_sources); i++)
+		if (valid_sources & (1 << i))
+			irq_create_mapping(v->domain, i);
 }
 
 static void vic_ack_irq(struct irq_data *d)
@@ -416,9 +421,9 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent)
 		return -EIO;
 
 	/*
-	 * Passing -1 as first IRQ makes the simple domain allocate descriptors
+	 * Passing 0 as first IRQ makes the simple domain allocate descriptors
 	 */
-	__vic_init(regs, -1, ~0, ~0, node);
+	__vic_init(regs, 0, ~0, ~0, node);
 
 	return 0;
 }

arch/arm/configs/multi_v7_defconfig

@@ -6,6 +6,7 @@ CONFIG_MACH_ARMADA_370=y
 CONFIG_MACH_ARMADA_XP=y
 CONFIG_ARCH_HIGHBANK=y
 CONFIG_ARCH_SOCFPGA=y
+CONFIG_ARCH_SUNXI=y
 # CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
 CONFIG_ARM_ERRATA_754322=y
 CONFIG_SMP=y

arch/arm/configs/mvebu_defconfig

@@ -33,9 +33,7 @@ CONFIG_MVNETA=y
 CONFIG_MARVELL_PHY=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_I2C=y
-CONFIG_I2C_MV64XXX=y
+CONFIG_SERIAL_8250_DW=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_USB_SUPPORT is not set

arch/arm/configs/omap2plus_defconfig

@@ -65,6 +65,8 @@ CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_CONNECTOR=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
@@ -132,9 +134,11 @@ CONFIG_POWER_SUPPLY=y
 CONFIG_WATCHDOG=y
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_TWL4030_WATCHDOG=y
+CONFIG_MFD_TPS65217=y
 CONFIG_REGULATOR_TWL4030=y
 CONFIG_REGULATOR_TPS65023=y
 CONFIG_REGULATOR_TPS6507X=y
+CONFIG_REGULATOR_TPS65217=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
@@ -170,6 +174,7 @@ CONFIG_SND_DEBUG=y
 CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_SOC=m
 CONFIG_SND_OMAP_SOC=m
+CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
 CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y

arch/arm/kernel/bios32.c

@@ -78,7 +78,7 @@ void pcibios_report_status(u_int status_mask, int warn)
  * Bug 3 is responsible for the sound DMA grinding to a halt.  We now
  * live with bug 2.
  */
-static void __devinit pci_fixup_83c553(struct pci_dev *dev)
+static void pci_fixup_83c553(struct pci_dev *dev)
 {
 	/*
 	 * Set memory region to start at address 0, and enable IO
@@ -130,7 +130,7 @@ static void __devinit pci_fixup_83c553(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_83C553, pci_fixup_83c553);
 
-static void __devinit pci_fixup_unassign(struct pci_dev *dev)
+static void pci_fixup_unassign(struct pci_dev *dev)
 {
 	dev->resource[0].end -= dev->resource[0].start;
 	dev->resource[0].start = 0;
@@ -142,7 +142,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND2, PCI_DEVICE_ID_WINBOND2_89C940F,
  * if it is the host bridge by marking it as such.  These resources are of
  * no consequence to the PCI layer (they are handled elsewhere).
  */
-static void __devinit pci_fixup_dec21285(struct pci_dev *dev)
+static void pci_fixup_dec21285(struct pci_dev *dev)
 {
 	int i;
 
@@ -161,7 +161,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, pci_fixup_d
 /*
  * PCI IDE controllers use non-standard I/O port decoding, respect it.
  */
-static void __devinit pci_fixup_ide_bases(struct pci_dev *dev)
+static void pci_fixup_ide_bases(struct pci_dev *dev)
 {
 	struct resource *r;
 	int i;
@@ -182,7 +182,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
 /*
  * Put the DEC21142 to sleep
  */
-static void __devinit pci_fixup_dec21142(struct pci_dev *dev)
+static void pci_fixup_dec21142(struct pci_dev *dev)
 {
 	pci_write_config_dword(dev, 0x40, 0x80000000);
 }
@@ -204,7 +204,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142, pci_fixup_d
  * functional.  However, The CY82C693U _does not work_ in bus
  * master mode without locking the PCI bus solid.
  */
-static void __devinit pci_fixup_cy82c693(struct pci_dev *dev)
+static void pci_fixup_cy82c693(struct pci_dev *dev)
 {
 	if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
 		u32 base0, base1;
@@ -254,7 +254,7 @@ static void __devinit pci_fixup_cy82c693(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, pci_fixup_cy82c693);
 
-static void __devinit pci_fixup_it8152(struct pci_dev *dev)
+static void pci_fixup_it8152(struct pci_dev *dev)
 {
 	int i;
 	/* fixup for ITE 8152 devices */
@@ -361,9 +361,7 @@ void pcibios_fixup_bus(struct pci_bus *bus)
 	printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n",
 		bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
 }
-#ifdef CONFIG_HOTPLUG
 EXPORT_SYMBOL(pcibios_fixup_bus);
-#endif
 
 /*
  * Swizzle the device pin each time we cross a bridge.  If a platform does
@@ -380,7 +378,7 @@ EXPORT_SYMBOL(pcibios_fixup_bus);
  * PCI standard swizzle is implemented on plug-in cards and Cardbus based
  * PCI extenders, so it can not be ignored.
  */
-static u8 __devinit pcibios_swizzle(struct pci_dev *dev, u8 *pin)
+static u8 pcibios_swizzle(struct pci_dev *dev, u8 *pin)
 {
 	struct pci_sys_data *sys = dev->sysdata;
 	int slot, oldpin = *pin;

arch/arm/kernel/etm.c

@@ -339,7 +339,7 @@ static struct miscdevice etb_miscdev = {
 	.fops = &etb_fops,
 };
 
-static int __devinit etb_probe(struct amba_device *dev, const struct amba_id *id)
+static int etb_probe(struct amba_device *dev, const struct amba_id *id)
 {
 	struct tracectx *t = &tracer;
 	int ret = 0;
@@ -531,7 +531,7 @@ static ssize_t trace_mode_store(struct kobject *kobj,
 static struct kobj_attribute trace_mode_attr =
 	__ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store);
 
-static int __devinit etm_probe(struct amba_device *dev, const struct amba_id *id)
+static int etm_probe(struct amba_device *dev, const struct amba_id *id)
 {
 	struct tracectx *t = &tracer;
 	int ret = 0;

arch/arm/kernel/perf_event_cpu.c

@@ -132,7 +132,7 @@ static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler)
 	return 0;
 }
 
-static void __devinit cpu_pmu_init(struct arm_pmu *cpu_pmu)
+static void cpu_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	int cpu;
 	for_each_possible_cpu(cpu) {
@@ -178,7 +178,7 @@ static struct notifier_block __cpuinitdata cpu_pmu_hotplug_notifier = {
 /*
  * PMU platform driver and devicetree bindings.
  */
-static struct of_device_id __devinitdata cpu_pmu_of_device_ids[] = {
+static struct of_device_id cpu_pmu_of_device_ids[] = {
 	{.compatible = "arm,cortex-a15-pmu",	.data = armv7_a15_pmu_init},
 	{.compatible = "arm,cortex-a9-pmu",	.data = armv7_a9_pmu_init},
 	{.compatible = "arm,cortex-a8-pmu",	.data = armv7_a8_pmu_init},
@@ -190,7 +190,7 @@ static struct of_device_id __devinitdata cpu_pmu_of_device_ids[] = {
 	{},
 };
 
-static struct platform_device_id __devinitdata cpu_pmu_plat_device_ids[] = {
+static struct platform_device_id cpu_pmu_plat_device_ids[] = {
 	{.name = "arm-pmu"},
 	{},
 };
@@ -198,7 +198,7 @@ static struct platform_device_id __devinitdata cpu_pmu_plat_device_ids[] = {
 /*
  * CPU PMU identification and probing.
  */
-static int __devinit probe_current_pmu(struct arm_pmu *pmu)
+static int probe_current_pmu(struct arm_pmu *pmu)
 {
 	int cpu = get_cpu();
 	unsigned long cpuid = read_cpuid_id();
@@ -252,7 +252,7 @@ static int __devinit probe_current_pmu(struct arm_pmu *pmu)
 	return ret;
 }
 
-static int __devinit cpu_pmu_device_probe(struct platform_device *pdev)
+static int cpu_pmu_device_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *of_id;
 	int (*init_fn)(struct arm_pmu *);

arch/arm/kernel/perf_event_v6.c

@@ -653,7 +653,7 @@ static int armv6_map_event(struct perf_event *event)
 				&armv6_perf_cache_map, 0xFF);
 }
 
-static int __devinit armv6pmu_init(struct arm_pmu *cpu_pmu)
+static int armv6pmu_init(struct arm_pmu *cpu_pmu)
 {
 	cpu_pmu->name		= "v6";
 	cpu_pmu->handle_irq	= armv6pmu_handle_irq;
@@ -685,7 +685,7 @@ static int armv6mpcore_map_event(struct perf_event *event)
 				&armv6mpcore_perf_cache_map, 0xFF);
 }
 
-static int __devinit armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	cpu_pmu->name		= "v6mpcore";
 	cpu_pmu->handle_irq	= armv6pmu_handle_irq;

arch/arm/kernel/perf_event_v7.c

@@ -1226,7 +1226,7 @@ static void armv7pmu_init(struct arm_pmu *cpu_pmu)
 	cpu_pmu->max_period	= (1LLU << 32) - 1;
 };
 
-static u32 __devinit armv7_read_num_pmnc_events(void)
+static u32 armv7_read_num_pmnc_events(void)
 {
 	u32 nb_cnt;
 
@@ -1237,7 +1237,7 @@ static u32 __devinit armv7_read_num_pmnc_events(void)
 	return nb_cnt + 1;
 }
 
-static int __devinit armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	armv7pmu_init(cpu_pmu);
 	cpu_pmu->name		= "ARMv7 Cortex-A8";
@@ -1246,7 +1246,7 @@ static int __devinit armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
 	return 0;
 }
 
-static int __devinit armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	armv7pmu_init(cpu_pmu);
 	cpu_pmu->name		= "ARMv7 Cortex-A9";
@@ -1255,7 +1255,7 @@ static int __devinit armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
 	return 0;
 }
 
-static int __devinit armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	armv7pmu_init(cpu_pmu);
 	cpu_pmu->name		= "ARMv7 Cortex-A5";
@@ -1264,7 +1264,7 @@ static int __devinit armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
 	return 0;
 }
 
-static int __devinit armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	armv7pmu_init(cpu_pmu);
 	cpu_pmu->name		= "ARMv7 Cortex-A15";
@@ -1274,7 +1274,7 @@ static int __devinit armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
 	return 0;
 }
 
-static int __devinit armv7_a7_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	armv7pmu_init(cpu_pmu);
 	cpu_pmu->name		= "ARMv7 Cortex-A7";

arch/arm/kernel/perf_event_xscale.c

@@ -440,7 +440,7 @@ static int xscale_map_event(struct perf_event *event)
 				&xscale_perf_cache_map, 0xFF);
 }
 
-static int __devinit xscale1pmu_init(struct arm_pmu *cpu_pmu)
+static int xscale1pmu_init(struct arm_pmu *cpu_pmu)
 {
 	cpu_pmu->name		= "xscale1";
 	cpu_pmu->handle_irq	= xscale1pmu_handle_irq;
@@ -810,7 +810,7 @@ static inline void xscale2pmu_write_counter(struct perf_event *event, u32 val)
 	}
 }
 
-static int __devinit xscale2pmu_init(struct arm_pmu *cpu_pmu)
+static int xscale2pmu_init(struct arm_pmu *cpu_pmu)
 {
 	cpu_pmu->name		= "xscale2";
 	cpu_pmu->handle_irq	= xscale2pmu_handle_irq;

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -358,7 +358,7 @@ static int cpld_video_probe(struct i2c_client *client,
 	return 0;
 }
 
-static int __devexit cpld_video_remove(struct i2c_client *client)
+static int cpld_video_remove(struct i2c_client *client)
 {
 	cpld_client = NULL;
 	return 0;

arch/arm/mach-davinci/cdce949.c

@@ -256,7 +256,7 @@ static int cdce_probe(struct i2c_client *client,
 	return 0;
 }
 
-static int __devexit cdce_remove(struct i2c_client *client)
+static int cdce_remove(struct i2c_client *client)
 {
 	cdce_i2c_client = NULL;
 	return 0;
@@ -274,7 +274,7 @@ static struct i2c_driver cdce_driver = {
 		.name	= "cdce949",
 	},
 	.probe		= cdce_probe,
-	.remove		= __devexit_p(cdce_remove),
+	.remove		= cdce_remove,
 	.id_table	= cdce_id,
 };
 

arch/arm/mach-dove/pcie.c

@@ -135,7 +135,7 @@ static struct pci_ops pcie_ops = {
 	.write = pcie_wr_conf,
 };
 
-static void __devinit rc_pci_fixup(struct pci_dev *dev)
+static void rc_pci_fixup(struct pci_dev *dev)
 {
 	/*
 	 * Prevent enumeration of root complex.

arch/arm/mach-exynos/Kconfig

@@ -74,6 +74,8 @@ config SOC_EXYNOS5440
 	depends on ARCH_EXYNOS5
 	select ARM_ARCH_TIMER
 	select AUTO_ZRELADDR
+	select PINCTRL
+	select PINCTRL_EXYNOS5440
 	help
 	  Enable EXYNOS5440 SoC support
 

arch/arm/mach-exynos/common.c

@@ -424,11 +424,18 @@ static void __init exynos5_init_clocks(int xtal)
 {
 	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
 
+	/* EXYNOS5440 can support only common clock framework */
+
+	if (soc_is_exynos5440())
+		return;
+
+#ifdef CONFIG_SOC_EXYNOS5250
 	s3c24xx_register_baseclocks(xtal);
 	s5p_register_clocks(xtal);
 
 	exynos5_register_clocks();
 	exynos5_setup_clocks();
+#endif
 }
 
 #define COMBINER_ENABLE_SET	0x0

arch/arm/mach-highbank/highbank.c

@@ -135,7 +135,7 @@ static struct sys_timer highbank_timer = {
 
 static void highbank_power_off(void)
 {
-	hignbank_set_pwr_shutdown();
+	highbank_set_pwr_shutdown();
 
 	while (1)
 		cpu_do_idle();

arch/arm/mach-highbank/hotplug.c

@@ -30,7 +30,7 @@ void __ref highbank_cpu_die(unsigned int cpu)
 {
 	flush_cache_all();
 
-	highbank_set_cpu_jump(cpu, secondary_startup);
+	highbank_set_cpu_jump(cpu, phys_to_virt(0));
 	highbank_set_core_pwr();
 
 	cpu_do_idle();

arch/arm/mach-highbank/platsmp.c

@@ -32,6 +32,7 @@ static void __cpuinit highbank_secondary_init(unsigned int cpu)
 
 static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
+	highbank_set_cpu_jump(cpu, secondary_startup);
 	gic_raise_softirq(cpumask_of(cpu), 0);
 	return 0;
 }
@@ -61,19 +62,8 @@ static void __init highbank_smp_init_cpus(void)
 
 static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
 {
-	int i;
-
 	if (scu_base_addr)
 		scu_enable(scu_base_addr);
-
-	/*
-	 * Write the address of secondary startup into the jump table
-	 * The cores are in wfi and wait until they receive a soft interrupt
-	 * and a non-zero value to jump to. Then the secondary CPU branches
-	 * to this address.
-	 */
-	for (i = 1; i < max_cpus; i++)
-		highbank_set_cpu_jump(i, secondary_startup);
 }
 
 struct smp_operations highbank_smp_ops __initdata = {

arch/arm/mach-highbank/pm.c

@@ -14,10 +14,12 @@
  * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/cpu_pm.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/suspend.h>
 
+#include <asm/cacheflush.h>
 #include <asm/proc-fns.h>
 #include <asm/suspend.h>
 
@@ -26,16 +28,31 @@
 
 static int highbank_suspend_finish(unsigned long val)
 {
+	outer_flush_all();
+	outer_disable();
+
+	highbank_set_pwr_suspend();
+
 	cpu_do_idle();
+
+	highbank_clear_pwr_request();
 	return 0;
 }
 
 static int highbank_pm_enter(suspend_state_t state)
 {
-	hignbank_set_pwr_suspend();
+	cpu_pm_enter();
+	cpu_cluster_pm_enter();
+
 	highbank_set_cpu_jump(0, cpu_resume);
 	cpu_suspend(0, highbank_suspend_finish);
 
+	cpu_cluster_pm_exit();
+	cpu_pm_exit();
+
+	highbank_smc1(0x102, 0x1);
+	if (scu_base_addr)
+		scu_enable(scu_base_addr);
 	return 0;
 }
 

arch/arm/mach-highbank/sysregs.h

@@ -44,28 +44,43 @@ static inline void highbank_set_core_pwr(void)
 		writel_relaxed(1, sregs_base + SREG_CPU_PWR_CTRL(cpu));
 }
 
-static inline void hignbank_set_pwr_suspend(void)
+static inline void highbank_clear_core_pwr(void)
+{
+	int cpu = cpu_logical_map(smp_processor_id());
+	if (scu_base_addr)
+		scu_power_mode(scu_base_addr, SCU_PM_NORMAL);
+	else
+		writel_relaxed(0, sregs_base + SREG_CPU_PWR_CTRL(cpu));
+}
+
+static inline void highbank_set_pwr_suspend(void)
 {
 	writel(HB_PWR_SUSPEND, sregs_base + HB_SREG_A9_PWR_REQ);
 	highbank_set_core_pwr();
 }
 
-static inline void hignbank_set_pwr_shutdown(void)
+static inline void highbank_set_pwr_shutdown(void)
 {
 	writel(HB_PWR_SHUTDOWN, sregs_base + HB_SREG_A9_PWR_REQ);
 	highbank_set_core_pwr();
 }
 
-static inline void hignbank_set_pwr_soft_reset(void)
+static inline void highbank_set_pwr_soft_reset(void)
 {
 	writel(HB_PWR_SOFT_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
 	highbank_set_core_pwr();
 }
 
-static inline void hignbank_set_pwr_hard_reset(void)
+static inline void highbank_set_pwr_hard_reset(void)
 {
 	writel(HB_PWR_HARD_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
 	highbank_set_core_pwr();
 }
 
+static inline void highbank_clear_pwr_request(void)
+{
+	writel(~0UL, sregs_base + HB_SREG_A9_PWR_REQ);
+	highbank_clear_core_pwr();
+}
+
 #endif

arch/arm/mach-highbank/system.c

@@ -22,9 +22,9 @@
 void highbank_restart(char mode, const char *cmd)
 {
 	if (mode == 'h')
-		hignbank_set_pwr_hard_reset();
+		highbank_set_pwr_hard_reset();
 	else
-		hignbank_set_pwr_soft_reset();
+		highbank_set_pwr_soft_reset();
 
 	while (1)
 		cpu_do_idle();

arch/arm/mach-imx/Kconfig

@@ -841,8 +841,6 @@ config SOC_IMX6Q
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
-	select ARM_ERRATA_743622
-	select ARM_ERRATA_751472
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
 	select ARM_ERRATA_775420

arch/arm/mach-imx/cpufreq.c

@@ -188,7 +188,7 @@ static struct cpufreq_driver mxc_driver = {
 	.name = "imx",
 };
 
-static int __devinit mxc_cpufreq_driver_init(void)
+static int mxc_cpufreq_driver_init(void)
 {
 	return cpufreq_register_driver(&mxc_driver);
 }

arch/arm/mach-imx/mmdc.c

@@ -21,7 +21,7 @@
 #define BP_MMDC_MAPSR_PSD	0
 #define BP_MMDC_MAPSR_PSS	4
 
-static int __devinit imx_mmdc_probe(struct platform_device *pdev)
+static int imx_mmdc_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	void __iomem *mmdc_base, *reg;

arch/arm/mach-iop13xx/pci.c

@@ -504,7 +504,7 @@ iop13xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 
 /* Scan an IOP13XX PCI bus.  nr selects which ATU we use.
  */
-struct pci_bus * __devinit iop13xx_scan_bus(int nr, struct pci_sys_data *sys)
+struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	int which_atu;
 	struct pci_bus *bus = NULL;

arch/arm/mach-kirkwood/board-dt.c

@@ -67,6 +67,10 @@ static void __init kirkwood_legacy_clk_init(void)
 	orion_clkdev_add(NULL, "mv643xx_eth_port.1",
 			 of_clk_get_from_provider(&clkspec));
 
+	clkspec.args[0] = CGC_BIT_SDIO;
+	orion_clkdev_add(NULL, "mvsdio",
+			 of_clk_get_from_provider(&clkspec));
+
 }
 
 static void __init kirkwood_of_clk_init(void)

arch/arm/mach-kirkwood/board-usi_topkick.c

@@ -64,8 +64,6 @@ static unsigned int topkick_mpp_config[] __initdata = {
 	0
 };
 
-#define TOPKICK_SATA0_PWR_ENABLE 36
-
 void __init usi_topkick_init(void)
 {
 	/*
@@ -73,8 +71,6 @@ void __init usi_topkick_init(void)
 	 */
 	kirkwood_mpp_conf(topkick_mpp_config);
 
-	/* SATA0 power enable */
-	gpio_set_value(TOPKICK_SATA0_PWR_ENABLE, 1);
 
 	kirkwood_ge00_init(&topkick_ge00_data);
 	kirkwood_sdio_init(&topkick_mvsdio_data);

arch/arm/mach-kirkwood/pcie.c

@@ -214,7 +214,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
  * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
  * the device. Decoding setup is handled by the orion code.
  */
-static void __devinit rc_pci_fixup(struct pci_dev *dev)
+static void rc_pci_fixup(struct pci_dev *dev)
 {
 	if (dev->bus->parent == NULL && dev->devfn == 0) {
 		int i;

arch/arm/mach-ks8695/board-acs5k.c

@@ -92,7 +92,7 @@ static struct i2c_board_info acs5k_i2c_devs[] __initdata = {
 	},
 };
 
-static void __devinit acs5k_i2c_init(void)
+static void acs5k_i2c_init(void)
 {
 	/* The gpio interface */
 	platform_device_register(&acs5k_i2c_device);

arch/arm/mach-mmp/sram.c

@@ -61,7 +61,7 @@ struct gen_pool *sram_get_gpool(char *pool_name)
 }
 EXPORT_SYMBOL(sram_get_gpool);
 
-static int __devinit sram_probe(struct platform_device *pdev)
+static int sram_probe(struct platform_device *pdev)
 {
 	struct sram_platdata *pdata = pdev->dev.platform_data;
 	struct sram_bank_info *info;
@@ -125,7 +125,7 @@ out:
 	return ret;
 }
 
-static int __devexit sram_remove(struct platform_device *pdev)
+static int sram_remove(struct platform_device *pdev)
 {
 	struct sram_bank_info *info;
 

arch/arm/mach-msm/proc_comm.c

@@ -120,7 +120,7 @@ int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2)
  * and unknown state. This function should be called early to
  * wait on the ARM9.
  */
-void __devinit proc_comm_boot_wait(void)
+void proc_comm_boot_wait(void)
 {
 	void __iomem *base = MSM_SHARED_RAM_BASE;
  

arch/arm/mach-msm/smd.c

@@ -988,7 +988,7 @@ int smd_core_init(void)
 	return 0;
 }
 
-static int __devinit msm_smd_probe(struct platform_device *pdev)
+static int msm_smd_probe(struct platform_device *pdev)
 {
 	/*
 	 * If we haven't waited for the ARM9 to boot up till now,

arch/arm/mach-mv78xx0/pcie.c

@@ -173,7 +173,7 @@ static struct pci_ops pcie_ops = {
 	.write = pcie_wr_conf,
 };
 
-static void __devinit rc_pci_fixup(struct pci_dev *dev)
+static void rc_pci_fixup(struct pci_dev *dev)
 {
 	/*
 	 * Prevent enumeration of root complex.

arch/arm/mach-nomadik/board-nhk8815.c

@@ -27,7 +27,6 @@
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/pinctrl-nomadik.h>
 #include <linux/platform_data/clocksource-nomadik-mtu.h>
-#include <linux/platform_data/mtd-nomadik-nand.h>
 #include <asm/hardware/vic.h>
 #include <asm/sizes.h>
 #include <asm/mach-types.h>

arch/arm/mach-nomadik/include/mach/irqs.h

@@ -22,49 +22,49 @@
 
 #include <mach/hardware.h>
 
-#define IRQ_VIC_START		1	/* first VIC interrupt is 1 */
+#define IRQ_VIC_START		32	/* first VIC interrupt is 1 */
 
 /*
  * Interrupt numbers generic for all Nomadik Chip cuts
  */
-#define IRQ_WATCHDOG			1
-#define IRQ_SOFTINT			2
-#define IRQ_CRYPTO			3
-#define IRQ_OWM				4
-#define IRQ_MTU0			5
-#define IRQ_MTU1			6
-#define IRQ_GPIO0			7
-#define IRQ_GPIO1			8
-#define IRQ_GPIO2			9
-#define IRQ_GPIO3			10
-#define IRQ_RTC_RTT			11
-#define IRQ_SSP				12
-#define IRQ_UART0			13
-#define IRQ_DMA1			14
-#define IRQ_CLCD_MDIF			15
-#define IRQ_DMA0			16
-#define IRQ_PWRFAIL			17
-#define IRQ_UART1			18
-#define IRQ_FIRDA			19
-#define IRQ_MSP0			20
-#define IRQ_I2C0			21
-#define IRQ_I2C1			22
-#define IRQ_SDMMC			23
-#define IRQ_USBOTG			24
-#define IRQ_SVA_IT0			25
-#define IRQ_SVA_IT1			26
-#define IRQ_SAA_IT0			27
-#define IRQ_SAA_IT1			28
-#define IRQ_UART2			29
-#define IRQ_MSP2			30
-#define IRQ_L2CC			49
-#define IRQ_HPI				50
-#define IRQ_SKE				51
-#define IRQ_KP				52
-#define IRQ_MEMST			55
-#define IRQ_SGA_IT			59
-#define IRQ_USBM			61
-#define IRQ_MSP1			63
+#define IRQ_WATCHDOG			(IRQ_VIC_START+0)
+#define IRQ_SOFTINT			(IRQ_VIC_START+1)
+#define IRQ_CRYPTO			(IRQ_VIC_START+2)
+#define IRQ_OWM				(IRQ_VIC_START+3)
+#define IRQ_MTU0			(IRQ_VIC_START+4)
+#define IRQ_MTU1			(IRQ_VIC_START+5)
+#define IRQ_GPIO0			(IRQ_VIC_START+6)
+#define IRQ_GPIO1			(IRQ_VIC_START+7)
+#define IRQ_GPIO2			(IRQ_VIC_START+8)
+#define IRQ_GPIO3			(IRQ_VIC_START+9)
+#define IRQ_RTC_RTT			(IRQ_VIC_START+10)
+#define IRQ_SSP				(IRQ_VIC_START+11)
+#define IRQ_UART0			(IRQ_VIC_START+12)
+#define IRQ_DMA1			(IRQ_VIC_START+13)
+#define IRQ_CLCD_MDIF			(IRQ_VIC_START+14)
+#define IRQ_DMA0			(IRQ_VIC_START+15)
+#define IRQ_PWRFAIL			(IRQ_VIC_START+16)
+#define IRQ_UART1			(IRQ_VIC_START+17)
+#define IRQ_FIRDA			(IRQ_VIC_START+18)
+#define IRQ_MSP0			(IRQ_VIC_START+19)
+#define IRQ_I2C0			(IRQ_VIC_START+20)
+#define IRQ_I2C1			(IRQ_VIC_START+21)
+#define IRQ_SDMMC			(IRQ_VIC_START+22)
+#define IRQ_USBOTG			(IRQ_VIC_START+23)
+#define IRQ_SVA_IT0			(IRQ_VIC_START+24)
+#define IRQ_SVA_IT1			(IRQ_VIC_START+25)
+#define IRQ_SAA_IT0			(IRQ_VIC_START+26)
+#define IRQ_SAA_IT1			(IRQ_VIC_START+27)
+#define IRQ_UART2			(IRQ_VIC_START+28)
+#define IRQ_MSP2			(IRQ_VIC_START+29)
+#define IRQ_L2CC			(IRQ_VIC_START+30)
+#define IRQ_HPI				(IRQ_VIC_START+31)
+#define IRQ_SKE				(IRQ_VIC_START+32)
+#define IRQ_KP				(IRQ_VIC_START+33)
+#define IRQ_MEMST			(IRQ_VIC_START+34)
+#define IRQ_SGA_IT			(IRQ_VIC_START+35)
+#define IRQ_USBM			(IRQ_VIC_START+36)
+#define IRQ_MSP1			(IRQ_VIC_START+37)
 
 #define NOMADIK_GPIO_OFFSET		(IRQ_VIC_START+64)
 

arch/arm/mach-omap1/Makefile

@@ -4,7 +4,7 @@
 
 # Common support
 obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
-	 serial.o devices.o dma.o
+	 serial.o devices.o dma.o fb.o
 obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
 
 ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)

arch/arm/mach-omap1/board-ams-delta.c

@@ -160,7 +160,7 @@ static struct omap_lcd_config ams_delta_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_usb_config ams_delta_usb_config = {
+static struct omap_usb_config ams_delta_usb_config __initdata = {
 	.register_host	= 1,
 	.hmc_mode	= 16,
 	.pins[0]	= 2,

arch/arm/mach-omap1/fb.c

@@ -0,0 +1,80 @@
+/*
+ * File: arch/arm/plat-omap/fb.c
+ *
+ * Framebuffer device registration for TI OMAP platforms
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/memblock.h>
+#include <linux/io.h>
+#include <linux/omapfb.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/mach/map.h>
+
+#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
+
+static bool omapfb_lcd_configured;
+static struct omapfb_platform_data omapfb_config;
+
+static u64 omap_fb_dma_mask = ~(u32)0;
+
+static struct platform_device omap_fb_device = {
+	.name		= "omapfb",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &omap_fb_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &omapfb_config,
+	},
+	.num_resources = 0,
+};
+
+void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
+{
+	omapfb_config.lcd = *config;
+	omapfb_lcd_configured = true;
+}
+
+static int __init omap_init_fb(void)
+{
+	/*
+	 * If the board file has not set the lcd config with
+	 * omapfb_set_lcd_config(), don't bother registering the omapfb device
+	 */
+	if (!omapfb_lcd_configured)
+		return 0;
+
+	return platform_device_register(&omap_fb_device);
+}
+
+arch_initcall(omap_init_fb);
+
+#else
+
+void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
+{
+}
+
+#endif

arch/arm/mach-omap1/mailbox.c

@@ -142,7 +142,7 @@ static struct omap_mbox mbox_dsp_info = {
 
 static struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL };
 
-static int __devinit omap1_mbox_probe(struct platform_device *pdev)
+static int omap1_mbox_probe(struct platform_device *pdev)
 {
 	struct resource *mem;
 	int ret;
@@ -165,7 +165,7 @@ static int __devinit omap1_mbox_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit omap1_mbox_remove(struct platform_device *pdev)
+static int omap1_mbox_remove(struct platform_device *pdev)
 {
 	omap_mbox_unregister();
 	iounmap(mbox_base);
@@ -174,7 +174,7 @@ static int __devexit omap1_mbox_remove(struct platform_device *pdev)
 
 static struct platform_driver omap1_mbox_driver = {
 	.probe	= omap1_mbox_probe,
-	.remove	= __devexit_p(omap1_mbox_remove),
+	.remove	= omap1_mbox_remove,
 	.driver	= {
 		.name	= "omap-mailbox",
 	},

arch/arm/mach-omap1/usb.c

@@ -629,8 +629,14 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config)
 static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
 #endif
 
-void __init omap1_usb_init(struct omap_usb_config *pdata)
+void __init omap1_usb_init(struct omap_usb_config *_pdata)
 {
+	struct omap_usb_config *pdata;
+
+	pdata = kmemdup(_pdata, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return;
+
 	pdata->usb0_init = omap1_usb0_init;
 	pdata->usb1_init = omap1_usb1_init;
 	pdata->usb2_init = omap1_usb2_init;

arch/arm/mach-omap2/Makefile

@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
+obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o gpmc.o timer.o pm.o \
 	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
 	 omap_device.o sram.o
 

arch/arm/mach-omap2/cclock3xxx_data.c

@@ -1167,6 +1167,8 @@ static const struct clk_ops emu_src_ck_ops = {
 	.recalc_rate	= &omap2_clksel_recalc,
 	.get_parent	= &omap2_clksel_find_parent_index,
 	.set_parent	= &omap2_clksel_set_parent,
+	.enable		= &omap2_clkops_enable_clkdm,
+	.disable	= &omap2_clkops_disable_clkdm,
 };
 
 static struct clk emu_src_ck;

arch/arm/mach-omap2/control.h

@@ -234,7 +234,7 @@
 #define OMAP343X_PADCONF_ETK_D14	OMAP343X_PADCONF_ETK(16)
 #define OMAP343X_PADCONF_ETK_D15	OMAP343X_PADCONF_ETK(17)
 
-/* 34xx GENERAL_WKUP regist offsets */
+/* 34xx GENERAL_WKUP register offsets */
 #define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \
 						0x008 + (i))
 #define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008)

arch/arm/mach-omap2/dpll3xxx.c

@@ -504,8 +504,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
 		if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
 			freqsel = _omap3_dpll_compute_freqsel(clk,
 						dd->last_rounded_n);
-			if (!freqsel)
-				WARN_ON(1);
+			WARN_ON(!freqsel);
 		}
 
 		pr_debug("%s: %s: set rate: locking rate to %lu.\n",

arch/arm/mach-omap2/drm.c

@@ -27,7 +27,6 @@
 
 #include "omap_device.h"
 #include "omap_hwmod.h"
-#include <plat/cpu.h>
 
 #if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE)
 

arch/arm/mach-omap2/dss-common.c

@@ -31,8 +31,7 @@
 #include <video/omap-panel-nokia-dsi.h>
 #include <video/omap-panel-picodlp.h>
 
-#include <plat/cpu.h>
-
+#include "soc.h"
 #include "dss-common.h"
 #include "mux.h"
 

arch/arm/plat-omap/fb.c → arch/arm/mach-omap2/fb.c

@@ -1,6 +1,4 @@
 /*
- * File: arch/arm/plat-omap/fb.c
- *
  * Framebuffer device registration for TI OMAP platforms
  *
  * Copyright (C) 2006 Nokia Corporation
@@ -33,7 +31,7 @@
 
 #include <asm/mach/map.h>
 
-#include <plat/cpu.h>
+#include "soc.h"
 
 #ifdef CONFIG_OMAP2_VRFB
 
@@ -94,45 +92,7 @@ static int __init omap_init_vrfb(void)
 arch_initcall(omap_init_vrfb);
 #endif
 
-#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
-
-static bool omapfb_lcd_configured;
-static struct omapfb_platform_data omapfb_config;
-
-static u64 omap_fb_dma_mask = ~(u32)0;
-
-static struct platform_device omap_fb_device = {
-	.name		= "omapfb",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= &omap_fb_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &omapfb_config,
-	},
-	.num_resources = 0,
-};
-
-void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
-{
-	omapfb_config.lcd = *config;
-	omapfb_lcd_configured = true;
-}
-
-static int __init omap_init_fb(void)
-{
-	/*
-	 * If the board file has not set the lcd config with
-	 * omapfb_set_lcd_config(), don't bother registering the omapfb device
-	 */
-	if (!omapfb_lcd_configured)
-		return 0;
-
-	return platform_device_register(&omap_fb_device);
-}
-
-arch_initcall(omap_init_fb);
-
-#elif defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
 
 static u64 omap_fb_dma_mask = ~(u32)0;
 static struct omapfb_platform_data omapfb_config;
@@ -155,10 +115,4 @@ static int __init omap_init_fb(void)
 
 arch_initcall(omap_init_fb);
 
-#else
-
-void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
-{
-}
-
 #endif

arch/arm/mach-omap2/gpmc.c

@@ -744,7 +744,7 @@ static int gpmc_setup_irq(void)
 	return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL);
 }
 
-static __devexit int gpmc_free_irq(void)
+static int gpmc_free_irq(void)
 {
 	int i;
 
@@ -762,7 +762,7 @@ static __devexit int gpmc_free_irq(void)
 	return 0;
 }
 
-static void __devexit gpmc_mem_exit(void)
+static void gpmc_mem_exit(void)
 {
 	int cs;
 
@@ -774,7 +774,7 @@ static void __devexit gpmc_mem_exit(void)
 
 }
 
-static int __devinit gpmc_mem_init(void)
+static int gpmc_mem_init(void)
 {
 	int cs, rc;
 	unsigned long boot_rom_space = 0;
@@ -1121,7 +1121,7 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
 	return 0;
 }
 
-static __devinit int gpmc_probe(struct platform_device *pdev)
+static int gpmc_probe(struct platform_device *pdev)
 {
 	int rc;
 	u32 l;
@@ -1177,7 +1177,7 @@ static __devinit int gpmc_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static __devexit int gpmc_remove(struct platform_device *pdev)
+static int gpmc_remove(struct platform_device *pdev)
 {
 	gpmc_free_irq();
 	gpmc_mem_exit();
@@ -1187,7 +1187,7 @@ static __devexit int gpmc_remove(struct platform_device *pdev)
 
 static struct platform_driver gpmc_driver = {
 	.probe		= gpmc_probe,
-	.remove		= __devexit_p(gpmc_remove),
+	.remove		= gpmc_remove,
 	.driver		= {
 		.name	= DEVICE_NAME,
 		.owner	= THIS_MODULE,

arch/arm/mach-omap2/mailbox.c

@@ -342,7 +342,7 @@ struct omap_mbox mbox_2_info = {
 struct omap_mbox *omap4_mboxes[] = { &mbox_1_info, &mbox_2_info, NULL };
 #endif
 
-static int __devinit omap2_mbox_probe(struct platform_device *pdev)
+static int omap2_mbox_probe(struct platform_device *pdev)
 {
 	struct resource *mem;
 	int ret;
@@ -395,7 +395,7 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit omap2_mbox_remove(struct platform_device *pdev)
+static int omap2_mbox_remove(struct platform_device *pdev)
 {
 	omap_mbox_unregister();
 	iounmap(mbox_base);
@@ -404,7 +404,7 @@ static int __devexit omap2_mbox_remove(struct platform_device *pdev)
 
 static struct platform_driver omap2_mbox_driver = {
 	.probe = omap2_mbox_probe,
-	.remove = __devexit_p(omap2_mbox_remove),
+	.remove = omap2_mbox_remove,
 	.driver = {
 		.name = "omap-mailbox",
 	},

arch/arm/mach-omap2/omap_hwmod_33xx_data.c

@@ -2070,7 +2070,7 @@ static struct omap_hwmod_irq_info am33xx_usbss_mpu_irqs[] = {
 	{ .name = "usbss-irq", .irq = 17 + OMAP_INTC_START, },
 	{ .name = "musb0-irq", .irq = 18 + OMAP_INTC_START, },
 	{ .name = "musb1-irq", .irq = 19 + OMAP_INTC_START, },
-	{ .irq = -1 + OMAP_INTC_START, },
+	{ .irq = -1, },
 };
 
 static struct omap_hwmod am33xx_usbss_hwmod = {
@@ -2515,7 +2515,7 @@ static struct omap_hwmod_ocp_if am33xx_l4_hs__cpgmac0 = {
 	.user		= OCP_USER_MPU,
 };
 
-struct omap_hwmod_addr_space am33xx_mdio_addr_space[] = {
+static struct omap_hwmod_addr_space am33xx_mdio_addr_space[] = {
 	{
 		.pa_start	= 0x4A101000,
 		.pa_end		= 0x4A101000 + SZ_256 - 1,
@@ -2523,7 +2523,7 @@ struct omap_hwmod_addr_space am33xx_mdio_addr_space[] = {
 	{ }
 };
 
-struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = {
+static struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = {
 	.master		= &am33xx_cpgmac0_hwmod,
 	.slave		= &am33xx_mdio_hwmod,
 	.addr		= am33xx_mdio_addr_space,

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -26,7 +26,6 @@
 
 #include <linux/omap-dma.h>
 
-#include <linux/platform_data/omap_ocp2scp.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 #include <linux/platform_data/iommu-omap.h>

arch/arm/mach-omap2/omap_twl.c

@@ -292,8 +292,8 @@ int __init omap3_twl_set_sr_bit(bool enable)
 	if (twl_sr_enable_autoinit)
 		pr_warning("%s: unexpected multiple calls\n", __func__);
 
-	ret = twl_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &temp,
-					TWL4030_DCDC_GLOBAL_CFG);
+	ret = twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &temp,
+			      TWL4030_DCDC_GLOBAL_CFG);
 	if (ret)
 		goto err;
 
@@ -302,8 +302,8 @@ int __init omap3_twl_set_sr_bit(bool enable)
 	else
 		temp &= ~SMARTREFLEX_ENABLE;
 
-	ret = twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, temp,
-				TWL4030_DCDC_GLOBAL_CFG);
+	ret = twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, temp,
+			       TWL4030_DCDC_GLOBAL_CFG);
 	if (!ret) {
 		twl_sr_enable_autoinit = true;
 		return 0;