V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card

The card based on stv0299 or stv0288 demodulators.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Documentation/video4linux/CARDLIST.cx88

@@ -74,3 +74,5 @@
  73 -> TeVii S420 DVB-S                                    [d420:9022]
  74 -> Prolink Pixelview Global Extreme                    [1554:4976]
  75 -> PROF 7300 DVB-S/S2                                  [B033:3033]
+ 76 -> SATTRADE ST4200 DVB-S/S2                            [b200:4200]
+ 77 -> TBS 8910 DVB-S                                      [8910:8888]

drivers/media/video/Makefile

@@ -25,6 +25,7 @@ obj-$(CONFIG_VIDEO_IR_I2C)  += ir-kbd-i2c.o
 obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o
 obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o
 obj-$(CONFIG_VIDEO_TDA9875) += tda9875.o
+obj-$(CONFIG_SOUND_TVMIXER) += tvmixer.o
 
 obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o
 obj-$(CONFIG_VIDEO_SAA5246A) += saa5246a.o

drivers/media/video/cx88/cx88-cards.c

@@ -1847,6 +1847,18 @@ static const struct cx88_board cx88_boards[] = {
 		} },
 		.mpeg           = CX88_MPEG_DVB,
 	},
+	[CX88_BOARD_TBS_8910] = {
+		.name           = "TBS 8910 DVB-S",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.input          = {{
+			.type   = CX88_VMUX_DVB,
+			.vmux   = 0,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
 	[CX88_BOARD_TBS_8920] = {
 		.name           = "TBS 8920 DVB-S/S2",
 		.tuner_type     = TUNER_ABSENT,
@@ -1871,6 +1883,18 @@ static const struct cx88_board cx88_boards[] = {
 		} },
 		.mpeg           = CX88_MPEG_DVB,
 	},
+	[CX88_BOARD_SATTRADE_ST4200] = {
+		.name           = "SATTRADE ST4200 DVB-S/S2",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.input          = {{
+			.type   = CX88_VMUX_DVB,
+			.vmux   = 0,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
 };
 
 /* ------------------------------------------------------------------ */
@@ -2260,6 +2284,10 @@ static const struct cx88_subid cx88_subids[] = {
 		.subvendor = 0xA044,
 		.subdevice = 0x2011,
 		.card      = CX88_BOARD_OMICOM_SS4_PCI,
+	}, {
+		.subvendor = 0x8910,
+		.subdevice = 0x8888,
+		.card      = CX88_BOARD_TBS_8910,
 	}, {
 		.subvendor = 0x8920,
 		.subdevice = 0x8888,
@@ -2268,6 +2296,10 @@ static const struct cx88_subid cx88_subids[] = {
 		.subvendor = 0xB033,
 		.subdevice = 0x3033,
 		.card      = CX88_BOARD_PROF_7300,
+	}, {
+		.subvendor = 0xb200,
+		.subdevice = 0x4200,
+		.card      = CX88_BOARD_SATTRADE_ST4200,
 	},
 };
 
@@ -2878,8 +2910,10 @@ static void cx88_card_setup(struct cx88_core *core)
 	case  CX88_BOARD_TEVII_S420:
 	case  CX88_BOARD_TEVII_S460:
 	case  CX88_BOARD_OMICOM_SS4_PCI:
+	case  CX88_BOARD_TBS_8910:
 	case  CX88_BOARD_TBS_8920:
 	case  CX88_BOARD_PROF_7300:
+	case  CX88_BOARD_SATTRADE_ST4200:
 		cx_write(MO_SRST_IO, 0);
 		msleep(100);
 		cx_write(MO_SRST_IO, 1);

drivers/media/video/cx88/cx88-dvb.c

@@ -1042,6 +1042,7 @@ static int dvb_register(struct cx8802_dev *dev)
 				0x08, ISL6421_DCL, 0x00);
 		}
 		break;
+	case CX88_BOARD_TBS_8910:
 	case CX88_BOARD_TEVII_S420:
 		fe0->dvb.frontend = dvb_attach(stv0299_attach,
 						&tevii_tuner_sharp_config,
@@ -1078,6 +1079,7 @@ static int dvb_register(struct cx8802_dev *dev)
 	case CX88_BOARD_OMICOM_SS4_PCI:
 	case CX88_BOARD_TBS_8920:
 	case CX88_BOARD_PROF_7300:
+	case CX88_BOARD_SATTRADE_ST4200:
 		fe0->dvb.frontend = dvb_attach(cx24116_attach,
 					       &hauppauge_hvr4000_config,
 					       &core->i2c_adap);

drivers/media/video/cx88/cx88.h

@@ -228,6 +228,8 @@ extern struct sram_channel cx88_sram_channels[];
 #define CX88_BOARD_TEVII_S420              73
 #define CX88_BOARD_PROLINK_PV_GLOBAL_XTREME 74
 #define CX88_BOARD_PROF_7300               75
+#define CX88_BOARD_SATTRADE_ST4200         76
+#define CX88_BOARD_TBS_8910                77
 
 enum cx88_itype {
 	CX88_VMUX_COMPOSITE1 = 1,

firmware/Makefile

@@ -150,27 +150,15 @@ $(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%
 $(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
 	$(call cmd,ihex)
 
-# Don't depend on ihex2fw if we're installing and it already exists.
-# Putting it after | in the dependencies doesn't seem sufficient when
-# we're installing after a cross-compile, because ihex2fw has dependencies
-# on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and 
-# thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree
-# is exported read-only for someone to run 'make install'.
-ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw)
-ihex2fw_dep :=
-else
-ihex2fw_dep := $(obj)/ihex2fw
-endif
-
 # .HEX is also Intel HEX, but where the offset and length in each record
 # is actually meaningful, because the firmware has to be loaded in a certain
 # order rather than as a single binary blob. Thus, we convert them into our
 # more compact binary representation of ihex records (<linux/ihex.h>)
-$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
+$(obj)/%.fw: $(obj)/%.HEX $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
 	$(call cmd,ihex2fw)
 
 # .H16 is our own modified form of Intel HEX, with 16-bit length for records.
-$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
+$(obj)/%.fw: $(obj)/%.H16 $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
 	$(call cmd,h16tofw)
 
 $(firmware-dirs):

sound/i2c/other/tea575x-tuner.c

@@ -18,7 +18,7 @@
  *   along with this program; if not, write to the Free Software
  *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  *
- */      
+ */
 
 #include <asm/io.h>
 #include <linux/delay.h>
@@ -89,7 +89,7 @@ static int snd_tea575x_ioctl(struct inode *inode, struct file *file,
 {
 	struct snd_tea575x *tea = video_drvdata(file);
 	void __user *arg = (void __user *)data;
-	
+
 	switch(cmd) {
 		case VIDIOCGCAP:
 		{
@@ -110,9 +110,9 @@ static int snd_tea575x_ioctl(struct inode *inode, struct file *file,
 		case VIDIOCGTUNER:
 		{
 			struct video_tuner v;
-			if (copy_from_user(&v, arg,sizeof(v))!=0) 
+			if (copy_from_user(&v, arg,sizeof(v))!=0)
 				return -EFAULT;
-			if (v.tuner)	/* Only 1 tuner */ 
+			if (v.tuner)	/* Only 1 tuner */
 				return -EINVAL;
 			v.rangelow = (87*16000);
 			v.rangehigh = (108*16000);
@@ -144,24 +144,24 @@ static int snd_tea575x_ioctl(struct inode *inode, struct file *file,
 			snd_tea575x_set_freq(tea);
 			return 0;
 		case VIDIOCGAUDIO:
-		{	
+		{
 			struct video_audio v;
 			memset(&v, 0, sizeof(v));
 			strcpy(v.name, "Radio");
 			if(copy_to_user(arg,&v, sizeof(v)))
 				return -EFAULT;
-			return 0;			
+			return 0;
 		}
 		case VIDIOCSAUDIO:
 		{
 			struct video_audio v;
-			if(copy_from_user(&v, arg, sizeof(v))) 
-				return -EFAULT;	
+			if(copy_from_user(&v, arg, sizeof(v)))
+				return -EFAULT;
 			if (tea->ops->mute)
 				tea->ops->mute(tea,
 					       (v.flags &
 						VIDEO_AUDIO_MUTE) ? 1 : 0);
-			if(v.audio) 
+			if(v.audio)
 				return -EINVAL;
 			return 0;
 		}
@@ -240,11 +240,11 @@ static int __init alsa_tea575x_module_init(void)
 {
 	return 0;
 }
-        
+
 static void __exit alsa_tea575x_module_exit(void)
 {
 }
-        
+
 module_init(alsa_tea575x_module_init)
 module_exit(alsa_tea575x_module_exit)