Kaynağa Gözat

Merge branches 'acpica', 'battery', 'boot-irqs', 'bz-24492', 'bz-9528', 'from-akpm', 'kexec-param' and 'misc' into release

Conflicts:
	Documentation/kernel-parameters.txt

Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown 14 yıl önce
100 değiştirilmiş dosya ile 853 ekleme ve 471 silme
  1. 0 9
      Documentation/feature-removal-schedule.txt
  2. 0 1
      Documentation/filesystems/nilfs2.txt
  3. 5 0
      Documentation/kernel-parameters.txt
  4. 1 1
      Documentation/networking/ip-sysctl.txt
  5. 1 1
      Documentation/x86/boot.txt
  6. 1 1
      Makefile
  7. 2 2
      arch/arm/mach-davinci/board-dm365-evm.c
  8. 16 5
      arch/arm/mach-davinci/gpio.c
  9. 6 0
      arch/arm/mach-davinci/irq.c
  10. 8 2
      arch/arm/mach-ixp4xx/common.c
  11. 7 7
      arch/arm/mach-s3c64xx/dma.c
  12. 6 6
      arch/arm/plat-s3c24xx/dma.c
  13. 3 3
      arch/arm/plat-samsung/dma.c
  14. 11 10
      arch/arm/plat-samsung/include/plat/dma.h
  15. 7 0
      arch/arm/plat-samsung/irq-uart.c
  16. 7 0
      arch/arm/plat-samsung/irq-vic-timer.c
  17. 6 16
      arch/mips/kernel/i8259.c
  18. 4 4
      arch/sparc/include/asm/irqflags_32.h
  19. 7 7
      arch/sparc/include/asm/irqflags_64.h
  20. 1 0
      arch/sparc/include/asm/ptrace.h
  21. 1 1
      arch/sparc/kernel/entry.S
  22. 1 1
      arch/sparc/mm/leon_mm.c
  23. 1 1
      arch/x86/Kconfig
  24. 24 0
      arch/x86/kernel/reboot.c
  25. 11 1
      drivers/acpi/apei/hest.c
  26. 50 32
      drivers/acpi/battery.c
  27. 2 2
      drivers/acpi/dock.c
  28. 1 1
      drivers/acpi/ec_sys.c
  29. 1 1
      drivers/acpi/fan.c
  30. 23 19
      drivers/acpi/osl.c
  31. 58 0
      drivers/acpi/pci_irq.c
  32. 2 1
      drivers/acpi/pci_root.c
  33. 1 1
      drivers/acpi/processor_thermal.c
  34. 11 2
      drivers/acpi/sbs.c
  35. 16 0
      drivers/acpi/sleep.c
  36. 2 2
      drivers/acpi/sysfs.c
  37. 1 1
      drivers/acpi/thermal.c
  38. 1 1
      drivers/acpi/video.c
  39. 2 2
      drivers/ata/libata-acpi.c
  40. 4 3
      drivers/char/agp/intel-agp.h
  41. 1 0
      drivers/gpio/wm831x-gpio.c
  42. 4 1
      drivers/gpu/drm/i915/i915_drv.h
  43. 35 36
      drivers/gpu/drm/i915/i915_gem.c
  44. 3 1
      drivers/gpu/drm/i915/i915_gem_tiling.c
  45. 14 1
      drivers/gpu/drm/i915/intel_display.c
  46. 1 1
      drivers/gpu/drm/radeon/evergreen.c
  47. 7 2
      drivers/gpu/drm/radeon/evergreen_blit_kms.c
  48. 15 6
      drivers/gpu/drm/radeon/radeon_bios.c
  49. 6 0
      drivers/gpu/drm/radeon/radeon_connectors.c
  50. 2 0
      drivers/gpu/drm/radeon/radeon_reg.h
  51. 3 3
      drivers/gpu/drm/radeon/rs600.c
  52. 5 5
      drivers/hwmon/adm1275.c
  53. 1 0
      drivers/hwmon/asus_atk0110.c
  54. 1 1
      drivers/hwmon/it87.c
  55. 11 0
      drivers/hwmon/max1111.c
  56. 10 10
      drivers/hwmon/pmbus_core.c
  57. 8 0
      drivers/media/dvb/dvb-core/dvb_frontend.c
  58. 2 2
      drivers/media/radio/Kconfig
  59. 2 2
      drivers/media/radio/si4713-i2c.c
  60. 5 4
      drivers/media/rc/mceusb.c
  61. 1 1
      drivers/media/rc/nuvoton-cir.c
  62. 2 7
      drivers/media/video/cx23885/cx23885-core.c
  63. 12 4
      drivers/media/video/tuner-core.c
  64. 50 27
      drivers/mmc/core/mmc.c
  65. 3 3
      drivers/net/bonding/bond_main.c
  66. 19 5
      drivers/net/gianfar.c
  67. 2 1
      drivers/net/gianfar.h
  68. 3 3
      drivers/net/natsemi.c
  69. 2 1
      drivers/net/pppoe.c
  70. 5 3
      drivers/net/r6040.c
  71. 1 1
      drivers/net/slip.c
  72. 0 4
      drivers/net/tulip/dmfe.c
  73. 4 3
      drivers/net/usb/hso.c
  74. 5 2
      drivers/net/wireless/ath/ath5k/pci.c
  75. 6 3
      drivers/net/wireless/ath/ath5k/sysfs.c
  76. 2 1
      drivers/net/wireless/ath/ath9k/xmit.c
  77. 2 0
      drivers/net/wireless/ath/carl9170/usb.c
  78. 1 0
      drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
  79. 1 1
      drivers/pci/hotplug/acpiphp_glue.c
  80. 9 9
      drivers/ssb/driver_pcicore.c
  81. 2 6
      drivers/thermal/Kconfig
  82. 111 31
      drivers/thermal/thermal_sys.c
  83. 1 2
      drivers/watchdog/Kconfig
  84. 16 3
      fs/ceph/mds_client.c
  85. 29 71
      fs/cifs/cifsfs.c
  86. 1 1
      fs/cifs/cifsfs.h
  87. 1 1
      fs/cifs/connect.c
  88. 12 1
      fs/cifs/dir.c
  89. 1 1
      fs/cifs/file.c
  90. 5 5
      fs/cifs/sess.c
  91. 12 10
      fs/cramfs/inode.c
  92. 34 19
      fs/dcache.c
  93. 1 1
      fs/exofs/super.c
  94. 5 9
      fs/fscache/page.c
  95. 3 0
      fs/gfs2/aops.c
  96. 5 3
      fs/gfs2/glops.c
  97. 2 0
      fs/gfs2/incore.h
  98. 1 0
      fs/gfs2/log.c
  99. 3 0
      fs/gfs2/ops_fstype.c
  100. 30 6
      fs/gfs2/super.c

+ 0 - 9
Documentation/feature-removal-schedule.txt

@@ -310,15 +310,6 @@ Who:	Ravikiran Thirumalai <kiran@scalex86.org>
 
 ---------------------------
 
-What:	CONFIG_THERMAL_HWMON
-When:	January 2009
-Why:	This option was introduced just to allow older lm-sensors userspace
-	to keep working over the upgrade to 2.6.26. At the scheduled time of
-	removal fixed lm-sensors (2.x or 3.x) should be readily available.
-Who:	Rene Herman <rene.herman@gmail.com>
-
----------------------------
-
 What:	Code that is now under CONFIG_WIRELESS_EXT_SYSFS
 	(in net/core/net-sysfs.c)
 When:	After the only user (hal) has seen a release with the patches

+ 0 - 1
Documentation/filesystems/nilfs2.txt

@@ -40,7 +40,6 @@ Features which NILFS2 does not support yet:
 	- POSIX ACLs
 	- quotas
 	- fsck
-	- resize
 	- defragmentation
 
 Mount options

+ 5 - 0
Documentation/kernel-parameters.txt

@@ -163,6 +163,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 			See also Documentation/power/pm.txt, pci=noacpi
 
+	acpi_rsdp=	[ACPI,EFI,KEXEC]
+			Pass the RSDP address to the kernel, mostly used
+			on machines running EFI runtime service to boot the
+			second kernel for kdump.
+
 	acpi_apic_instance=	[ACPI, IOAPIC]
 			Format: <int>
 			2: use 2nd APIC table, if available

+ 1 - 1
Documentation/networking/ip-sysctl.txt

@@ -346,7 +346,7 @@ tcp_orphan_retries - INTEGER
 	when RTO retransmissions remain unacknowledged.
 	See tcp_retries2 for more details.
 
-	The default value is 7.
+	The default value is 8.
 	If your machine is a loaded WEB server,
 	you should think about lowering this value, such sockets
 	may consume significant resources. Cf. tcp_max_orphans.

+ 1 - 1
Documentation/x86/boot.txt

@@ -674,7 +674,7 @@ Protocol:	2.10+
 
 Field name:	init_size
 Type:		read
-Offset/size:	0x25c/4
+Offset/size:	0x260/4
 
   This field indicates the amount of linear contiguous memory starting
   at the kernel runtime start address that the kernel needs before it

+ 1 - 1
Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 0
 SUBLEVEL = 0
-EXTRAVERSION = -rc7
+EXTRAVERSION =
 NAME = Sneaky Weasel
 
 # *DOCUMENTATION*

+ 2 - 2
arch/arm/mach-davinci/board-dm365-evm.c

@@ -520,7 +520,7 @@ fail:
 	 */
 	if (have_imager()) {
 		label = "HD imager";
-		mux |= 1;
+		mux |= 2;
 
 		/* externally mux MMC1/ENET/AIC33 to imager */
 		mux |= BIT(6) | BIT(5) | BIT(3);
@@ -540,7 +540,7 @@ fail:
 		resets &= ~BIT(1);
 
 		if (have_tvp7002()) {
-			mux |= 2;
+			mux |= 1;
 			resets &= ~BIT(2);
 			label = "tvp7002 HD";
 		} else {

+ 16 - 5
arch/arm/mach-davinci/gpio.c

@@ -254,8 +254,10 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 {
 	struct davinci_gpio_regs __iomem *g;
 	u32 mask = 0xffff;
+	struct davinci_gpio_controller *d;
 
-	g = (__force struct davinci_gpio_regs __iomem *) irq_desc_get_handler_data(desc);
+	d = (struct davinci_gpio_controller *)irq_desc_get_handler_data(desc);
+	g = (struct davinci_gpio_regs __iomem *)d->regs;
 
 	/* we only care about one bank */
 	if (irq & 1)
@@ -274,11 +276,14 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 		if (!status)
 			break;
 		__raw_writel(status, &g->intstat);
-		if (irq & 1)
-			status >>= 16;
 
 		/* now demux them to the right lowlevel handler */
-		n = (int)irq_get_handler_data(irq);
+		n = d->irq_base;
+		if (irq & 1) {
+			n += 16;
+			status >>= 16;
+		}
+
 		while (status) {
 			res = ffs(status);
 			n += res;
@@ -424,7 +429,13 @@ static int __init davinci_gpio_irq_setup(void)
 
 		/* set up all irqs in this bank */
 		irq_set_chained_handler(bank_irq, gpio_irq_handler);
-		irq_set_handler_data(bank_irq, (__force void *)g);
+
+		/*
+		 * Each chip handles 32 gpios, and each irq bank consists of 16
+		 * gpio irqs. Pass the irq bank's corresponding controller to
+		 * the chained irq handler.
+		 */
+		irq_set_handler_data(bank_irq, &chips[gpio / 32]);
 
 		for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
 			irq_set_chip(irq, &gpio_irqchip);

+ 6 - 0
arch/arm/mach-davinci/irq.c

@@ -52,6 +52,12 @@ davinci_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
 	struct irq_chip_type *ct;
 
 	gc = irq_alloc_generic_chip("AINTC", 1, irq_start, base, handle_edge_irq);
+	if (!gc) {
+		pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n",
+		       __func__, irq_start);
+		return;
+	}
+
 	ct = gc->chip_types;
 	ct->chip.irq_ack = irq_gc_ack_set_bit;
 	ct->chip.irq_mask = irq_gc_mask_clr_bit;

+ 8 - 2
arch/arm/mach-ixp4xx/common.c

@@ -419,14 +419,20 @@ static void notrace ixp4xx_update_sched_clock(void)
 /*
  * clocksource
  */
+
+static cycle_t ixp4xx_clocksource_read(struct clocksource *c)
+{
+	return *IXP4XX_OSTS;
+}
+
 unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ;
 EXPORT_SYMBOL(ixp4xx_timer_freq);
 static void __init ixp4xx_clocksource_init(void)
 {
 	init_sched_clock(&cd, ixp4xx_update_sched_clock, 32, ixp4xx_timer_freq);
 
-	clocksource_mmio_init(&IXP4XX_OSTS, "OSTS", ixp4xx_timer_freq, 200, 32,
-			clocksource_mmio_readl_up);
+	clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32,
+			ixp4xx_clocksource_read);
 }
 
 /*

+ 7 - 7
arch/arm/mach-s3c64xx/dma.c

@@ -113,7 +113,7 @@ found:
 	return chan;
 }
 
-int s3c2410_dma_config(unsigned int channel, int xferunit)
+int s3c2410_dma_config(enum dma_ch channel, int xferunit)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 
@@ -297,7 +297,7 @@ static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan)
 	return 0;
 }
 
-int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
+int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 
@@ -331,7 +331,7 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl);
  *
  */
 
-int s3c2410_dma_enqueue(unsigned int channel, void *id,
+int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
 			dma_addr_t data, int size)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -415,7 +415,7 @@ err_buff:
 EXPORT_SYMBOL(s3c2410_dma_enqueue);
 
 
-int s3c2410_dma_devconfig(unsigned int channel,
+int s3c2410_dma_devconfig(enum dma_ch channel,
 			  enum s3c2410_dmasrc source,
 			  unsigned long devaddr)
 {
@@ -463,7 +463,7 @@ int s3c2410_dma_devconfig(unsigned int channel,
 EXPORT_SYMBOL(s3c2410_dma_devconfig);
 
 
-int s3c2410_dma_getposition(unsigned int channel,
+int s3c2410_dma_getposition(enum dma_ch channel,
 			    dma_addr_t *src, dma_addr_t *dst)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -487,7 +487,7 @@ EXPORT_SYMBOL(s3c2410_dma_getposition);
  * get control of an dma channel
 */
 
-int s3c2410_dma_request(unsigned int channel,
+int s3c2410_dma_request(enum dma_ch channel,
 			struct s3c2410_dma_client *client,
 			void *dev)
 {
@@ -533,7 +533,7 @@ EXPORT_SYMBOL(s3c2410_dma_request);
  * allowed to go through.
 */
 
-int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
+int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 	unsigned long flags;

+ 6 - 6
arch/arm/plat-s3c24xx/dma.c

@@ -712,7 +712,7 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel);
  * get control of an dma channel
 */
 
-int s3c2410_dma_request(unsigned int channel,
+int s3c2410_dma_request(enum dma_ch channel,
 			struct s3c2410_dma_client *client,
 			void *dev)
 {
@@ -783,7 +783,7 @@ EXPORT_SYMBOL(s3c2410_dma_request);
  * allowed to go through.
 */
 
-int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
+int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 	unsigned long flags;
@@ -974,7 +974,7 @@ static int s3c2410_dma_started(struct s3c2410_dma_chan *chan)
 }
 
 int
-s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
+s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 
@@ -1021,7 +1021,7 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl);
  * xfersize:     size of unit in bytes (1,2,4)
 */
 
-int s3c2410_dma_config(unsigned int channel,
+int s3c2410_dma_config(enum dma_ch channel,
 		       int xferunit)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -1100,7 +1100,7 @@ EXPORT_SYMBOL(s3c2410_dma_config);
  * devaddr:   physical address of the source
 */
 
-int s3c2410_dma_devconfig(unsigned int channel,
+int s3c2410_dma_devconfig(enum dma_ch channel,
 			  enum s3c2410_dmasrc source,
 			  unsigned long devaddr)
 {
@@ -1173,7 +1173,7 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig);
  * returns the current transfer points for the dma source and destination
 */
 
-int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *dst)
+int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dst)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 

+ 3 - 3
arch/arm/plat-samsung/dma.c

@@ -41,7 +41,7 @@ struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel)
  * irq?
 */
 
-int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
+int s3c2410_dma_set_opfn(enum dma_ch channel, s3c2410_dma_opfn_t rtn)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 
@@ -56,7 +56,7 @@ int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
 }
 EXPORT_SYMBOL(s3c2410_dma_set_opfn);
 
-int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
+int s3c2410_dma_set_buffdone_fn(enum dma_ch channel, s3c2410_dma_cbfn_t rtn)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 
@@ -71,7 +71,7 @@ int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
 }
 EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
 
-int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
+int s3c2410_dma_setflags(enum dma_ch channel, unsigned int flags)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
 

+ 11 - 10
arch/arm/plat-samsung/include/plat/dma.h

@@ -42,6 +42,7 @@ struct s3c2410_dma_client {
 };
 
 struct s3c2410_dma_chan;
+enum dma_ch;
 
 /* s3c2410_dma_cbfn_t
  *
@@ -62,7 +63,7 @@ typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
  * request a dma channel exclusivley
 */
 
-extern int s3c2410_dma_request(unsigned int channel,
+extern int s3c2410_dma_request(enum dma_ch channel,
 			       struct s3c2410_dma_client *, void *dev);
 
 
@@ -71,14 +72,14 @@ extern int s3c2410_dma_request(unsigned int channel,
  * change the state of the dma channel
 */
 
-extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
+extern int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op);
 
 /* s3c2410_dma_setflags
  *
  * set the channel's flags to a given state
 */
 
-extern int s3c2410_dma_setflags(unsigned int channel,
+extern int s3c2410_dma_setflags(enum dma_ch channel,
 				unsigned int flags);
 
 /* s3c2410_dma_free
@@ -86,7 +87,7 @@ extern int s3c2410_dma_setflags(unsigned int channel,
  * free the dma channel (will also abort any outstanding operations)
 */
 
-extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
+extern int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *);
 
 /* s3c2410_dma_enqueue
  *
@@ -95,7 +96,7 @@ extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
  * drained before the buffer is given to the DMA system.
 */
 
-extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
+extern int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
 			       dma_addr_t data, int size);
 
 /* s3c2410_dma_config
@@ -103,14 +104,14 @@ extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
  * configure the dma channel
 */
 
-extern int s3c2410_dma_config(unsigned int channel, int xferunit);
+extern int s3c2410_dma_config(enum dma_ch channel, int xferunit);
 
 /* s3c2410_dma_devconfig
  *
  * configure the device we're talking to
 */
 
-extern int s3c2410_dma_devconfig(unsigned int channel,
+extern int s3c2410_dma_devconfig(enum dma_ch channel,
 		enum s3c2410_dmasrc source, unsigned long devaddr);
 
 /* s3c2410_dma_getposition
@@ -118,10 +119,10 @@ extern int s3c2410_dma_devconfig(unsigned int channel,
  * get the position that the dma transfer is currently at
 */
 
-extern int s3c2410_dma_getposition(unsigned int channel,
+extern int s3c2410_dma_getposition(enum dma_ch channel,
 				   dma_addr_t *src, dma_addr_t *dest);
 
-extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
-extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
+extern int s3c2410_dma_set_opfn(enum dma_ch, s3c2410_dma_opfn_t rtn);
+extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn);
 
 

+ 7 - 0
arch/arm/plat-samsung/irq-uart.c

@@ -54,6 +54,13 @@ static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq)
 
 	gc = irq_alloc_generic_chip("s3c-uart", 1, uirq->base_irq, reg_base,
 				    handle_level_irq);
+
+	if (!gc) {
+		pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n",
+		       __func__, uirq->base_irq);
+		return;
+	}
+
 	ct = gc->chip_types;
 	ct->chip.irq_ack = irq_gc_ack_set_bit;
 	ct->chip.irq_mask = irq_gc_mask_set_bit;

+ 7 - 0
arch/arm/plat-samsung/irq-vic-timer.c

@@ -54,6 +54,13 @@ void __init s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq)
 
 	s3c_tgc = irq_alloc_generic_chip("s3c-timer", 1, timer_irq,
 					 S3C64XX_TINT_CSTAT, handle_level_irq);
+
+	if (!s3c_tgc) {
+		pr_err("%s: irq_alloc_generic_chip for IRQ %d failed\n",
+		       __func__, timer_irq);
+		return;
+	}
+
 	ct = s3c_tgc->chip_types;
 	ct->chip.irq_mask = irq_gc_mask_clr_bit;
 	ct->chip.irq_unmask = irq_gc_mask_set_bit;

+ 6 - 16
arch/mips/kernel/i8259.c

@@ -14,7 +14,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 #include <linux/irq.h>
 
 #include <asm/i8259.h>
@@ -215,14 +215,13 @@ spurious_8259A_irq:
 	}
 }
 
-static int i8259A_resume(struct sys_device *dev)
+static void i8259A_resume(void)
 {
 	if (i8259A_auto_eoi >= 0)
 		init_8259A(i8259A_auto_eoi);
-	return 0;
 }
 
-static int i8259A_shutdown(struct sys_device *dev)
+static void i8259A_shutdown(void)
 {
 	/* Put the i8259A into a quiescent state that
 	 * the kernel initialization code can get it
@@ -232,26 +231,17 @@ static int i8259A_shutdown(struct sys_device *dev)
 		outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
 		outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-1 */
 	}
-	return 0;
 }
 
-static struct sysdev_class i8259_sysdev_class = {
-	.name = "i8259",
+static struct syscore_ops i8259_syscore_ops = {
 	.resume = i8259A_resume,
 	.shutdown = i8259A_shutdown,
 };
 
-static struct sys_device device_i8259A = {
-	.id	= 0,
-	.cls	= &i8259_sysdev_class,
-};
-
 static int __init i8259A_init_sysfs(void)
 {
-	int error = sysdev_class_register(&i8259_sysdev_class);
-	if (!error)
-		error = sysdev_register(&device_i8259A);
-	return error;
+	register_syscore_ops(&i8259_syscore_ops);
+	return 0;
 }
 
 device_initcall(i8259A_init_sysfs);

+ 4 - 4
arch/sparc/include/asm/irqflags_32.h

@@ -18,7 +18,7 @@ extern void arch_local_irq_restore(unsigned long);
 extern unsigned long arch_local_irq_save(void);
 extern void arch_local_irq_enable(void);
 
-static inline unsigned long arch_local_save_flags(void)
+static inline notrace unsigned long arch_local_save_flags(void)
 {
 	unsigned long flags;
 
@@ -26,17 +26,17 @@ static inline unsigned long arch_local_save_flags(void)
 	return flags;
 }
 
-static inline void arch_local_irq_disable(void)
+static inline notrace void arch_local_irq_disable(void)
 {
 	arch_local_irq_save();
 }
 
-static inline bool arch_irqs_disabled_flags(unsigned long flags)
+static inline notrace bool arch_irqs_disabled_flags(unsigned long flags)
 {
 	return (flags & PSR_PIL) != 0;
 }
 
-static inline bool arch_irqs_disabled(void)
+static inline notrace bool arch_irqs_disabled(void)
 {
 	return arch_irqs_disabled_flags(arch_local_save_flags());
 }

+ 7 - 7
arch/sparc/include/asm/irqflags_64.h

@@ -14,7 +14,7 @@
 
 #ifndef __ASSEMBLY__
 
-static inline unsigned long arch_local_save_flags(void)
+static inline notrace unsigned long arch_local_save_flags(void)
 {
 	unsigned long flags;
 
@@ -26,7 +26,7 @@ static inline unsigned long arch_local_save_flags(void)
 	return flags;
 }
 
-static inline void arch_local_irq_restore(unsigned long flags)
+static inline notrace void arch_local_irq_restore(unsigned long flags)
 {
 	__asm__ __volatile__(
 		"wrpr	%0, %%pil"
@@ -36,7 +36,7 @@ static inline void arch_local_irq_restore(unsigned long flags)
 	);
 }
 
-static inline void arch_local_irq_disable(void)
+static inline notrace void arch_local_irq_disable(void)
 {
 	__asm__ __volatile__(
 		"wrpr	%0, %%pil"
@@ -46,7 +46,7 @@ static inline void arch_local_irq_disable(void)
 	);
 }
 
-static inline void arch_local_irq_enable(void)
+static inline notrace void arch_local_irq_enable(void)
 {
 	__asm__ __volatile__(
 		"wrpr	0, %%pil"
@@ -56,17 +56,17 @@ static inline void arch_local_irq_enable(void)
 	);
 }
 
-static inline int arch_irqs_disabled_flags(unsigned long flags)
+static inline notrace int arch_irqs_disabled_flags(unsigned long flags)
 {
 	return (flags > 0);
 }
 
-static inline int arch_irqs_disabled(void)
+static inline notrace int arch_irqs_disabled(void)
 {
 	return arch_irqs_disabled_flags(arch_local_save_flags());
 }
 
-static inline unsigned long arch_local_irq_save(void)
+static inline notrace unsigned long arch_local_irq_save(void)
 {
 	unsigned long flags, tmp;
 

+ 1 - 0
arch/sparc/include/asm/ptrace.h

@@ -205,6 +205,7 @@ do {	current_thread_info()->syscall_noerror = 1; \
 } while (0)
 #define user_mode(regs) (!((regs)->tstate & TSTATE_PRIV))
 #define instruction_pointer(regs) ((regs)->tpc)
+#define instruction_pointer_set(regs, val) ((regs)->tpc = (val))
 #define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP])
 #define regs_return_value(regs) ((regs)->u_regs[UREG_I0])
 #ifdef CONFIG_SMP

+ 1 - 1
arch/sparc/kernel/entry.S

@@ -293,7 +293,7 @@ maybe_smp4m_msg:
 	WRITE_PAUSE
 	wr	%l4, PSR_ET, %psr
 	WRITE_PAUSE
-	sll	%o3, 28, %o2		! shift for simpler checks below
+	srl	%o3, 28, %o2		! shift for simpler checks below
 maybe_smp4m_msg_check_single:
 	andcc	%o2, 0x1, %g0
 	beq,a	maybe_smp4m_msg_check_mask

+ 1 - 1
arch/sparc/mm/leon_mm.c

@@ -226,7 +226,7 @@ void leon3_getCacheRegs(struct leon3_cacheregs *regs)
  * Leon2 and Leon3 differ in their way of telling cache information
  *
  */
-int leon_flush_needed(void)
+int __init leon_flush_needed(void)
 {
 	int flush_needed = -1;
 	unsigned int ssize, sets;

+ 1 - 1
arch/x86/Kconfig

@@ -1170,7 +1170,7 @@ comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
 config AMD_NUMA
 	def_bool y
 	prompt "Old style AMD Opteron NUMA detection"
-	depends on NUMA && PCI
+	depends on X86_64 && NUMA && PCI
 	---help---
 	  Enable AMD NUMA node topology detection.  You should say Y here if
 	  you have a multi processor AMD system. This uses an old method to

+ 24 - 0
arch/x86/kernel/reboot.c

@@ -419,6 +419,30 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1"),
 		},
 	},
+	{	/* Handle problems with rebooting on the Latitude E6320. */
+		.callback = set_pci_reboot,
+		.ident = "Dell Latitude E6320",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6320"),
+		},
+	},
+	{	/* Handle problems with rebooting on the Latitude E5420. */
+		.callback = set_pci_reboot,
+		.ident = "Dell Latitude E5420",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E5420"),
+		},
+	},
+	{	/* Handle problems with rebooting on the Latitude E6420. */
+		.callback = set_pci_reboot,
+		.ident = "Dell Latitude E6420",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6420"),
+		},
+	},
 	{ }
 };
 

+ 11 - 1
drivers/acpi/apei/hest.c

@@ -139,13 +139,23 @@ static int __init hest_parse_ghes(struct acpi_hest_header *hest_hdr, void *data)
 {
 	struct platform_device *ghes_dev;
 	struct ghes_arr *ghes_arr = data;
-	int rc;
+	int rc, i;
 
 	if (hest_hdr->type != ACPI_HEST_TYPE_GENERIC_ERROR)
 		return 0;
 
 	if (!((struct acpi_hest_generic *)hest_hdr)->enabled)
 		return 0;
+	for (i = 0; i < ghes_arr->count; i++) {
+		struct acpi_hest_header *hdr;
+		ghes_dev = ghes_arr->ghes_devs[i];
+		hdr = *(struct acpi_hest_header **)ghes_dev->dev.platform_data;
+		if (hdr->source_id == hest_hdr->source_id) {
+			pr_warning(FW_WARN HEST_PFX "Duplicated hardware error source ID: %d.\n",
+				   hdr->source_id);
+			return -EIO;
+		}
+	}
 	ghes_dev = platform_device_alloc("GHES", hest_hdr->source_id);
 	if (!ghes_dev)
 		return -ENOMEM;

+ 50 - 32
drivers/acpi/battery.c

@@ -55,6 +55,9 @@
 #define ACPI_BATTERY_NOTIFY_INFO	0x81
 #define ACPI_BATTERY_NOTIFY_THRESHOLD   0x82
 
+/* Battery power unit: 0 means mW, 1 means mA */
+#define ACPI_BATTERY_POWER_UNIT_MA	1
+
 #define _COMPONENT		ACPI_BATTERY_COMPONENT
 
 ACPI_MODULE_NAME("battery");
@@ -91,11 +94,6 @@ MODULE_DEVICE_TABLE(acpi, battery_device_ids);
 enum {
 	ACPI_BATTERY_ALARM_PRESENT,
 	ACPI_BATTERY_XINFO_PRESENT,
-	/* For buggy DSDTs that report negative 16-bit values for either
-	 * charging or discharging current and/or report 0 as 65536
-	 * due to bad math.
-	 */
-	ACPI_BATTERY_QUIRK_SIGNED16_CURRENT,
 	ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY,
 };
 
@@ -301,7 +299,8 @@ static enum power_supply_property energy_battery_props[] = {
 #ifdef CONFIG_ACPI_PROCFS_POWER
 inline char *acpi_battery_units(struct acpi_battery *battery)
 {
-	return (battery->power_unit)?"mA":"mW";
+	return (battery->power_unit == ACPI_BATTERY_POWER_UNIT_MA) ?
+		"mA" : "mW";
 }
 #endif
 
@@ -461,9 +460,17 @@ static int acpi_battery_get_state(struct acpi_battery *battery)
 	battery->update_time = jiffies;
 	kfree(buffer.pointer);
 
-	if (test_bit(ACPI_BATTERY_QUIRK_SIGNED16_CURRENT, &battery->flags) &&
-	    battery->rate_now != -1)
+	/* For buggy DSDTs that report negative 16-bit values for either
+	 * charging or discharging current and/or report 0 as 65536
+	 * due to bad math.
+	 */
+	if (battery->power_unit == ACPI_BATTERY_POWER_UNIT_MA &&
+		battery->rate_now != ACPI_BATTERY_VALUE_UNKNOWN &&
+		(s16)(battery->rate_now) < 0) {
 		battery->rate_now = abs((s16)battery->rate_now);
+		printk_once(KERN_WARNING FW_BUG "battery: (dis)charge rate"
+			" invalid.\n");
+	}
 
 	if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags)
 	    && battery->capacity_now >= 0 && battery->capacity_now <= 100)
@@ -544,7 +551,7 @@ static int sysfs_add_battery(struct acpi_battery *battery)
 {
 	int result;
 
-	if (battery->power_unit) {
+	if (battery->power_unit == ACPI_BATTERY_POWER_UNIT_MA) {
 		battery->bat.properties = charge_battery_props;
 		battery->bat.num_properties =
 			ARRAY_SIZE(charge_battery_props);
@@ -566,18 +573,16 @@ static int sysfs_add_battery(struct acpi_battery *battery)
 
 static void sysfs_remove_battery(struct acpi_battery *battery)
 {
-	if (!battery->bat.dev)
+	mutex_lock(&battery->lock);
+	if (!battery->bat.dev) {
+		mutex_unlock(&battery->lock);
 		return;
+	}
+
 	device_remove_file(battery->bat.dev, &alarm_attr);
 	power_supply_unregister(&battery->bat);
 	battery->bat.dev = NULL;
-}
-
-static void acpi_battery_quirks(struct acpi_battery *battery)
-{
-	if (dmi_name_in_vendors("Acer") && battery->power_unit) {
-		set_bit(ACPI_BATTERY_QUIRK_SIGNED16_CURRENT, &battery->flags);
-	}
+	mutex_unlock(&battery->lock);
 }
 
 /*
@@ -592,7 +597,7 @@ static void acpi_battery_quirks(struct acpi_battery *battery)
  *
  * Handle this correctly so that they won't break userspace.
  */
-static void acpi_battery_quirks2(struct acpi_battery *battery)
+static void acpi_battery_quirks(struct acpi_battery *battery)
 {
 	if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags))
 		return ;
@@ -623,13 +628,15 @@ static int acpi_battery_update(struct acpi_battery *battery)
 		result = acpi_battery_get_info(battery);
 		if (result)
 			return result;
-		acpi_battery_quirks(battery);
 		acpi_battery_init_alarm(battery);
 	}
-	if (!battery->bat.dev)
-		sysfs_add_battery(battery);
+	if (!battery->bat.dev) {
+		result = sysfs_add_battery(battery);
+		if (result)
+			return result;
+	}
 	result = acpi_battery_get_state(battery);
-	acpi_battery_quirks2(battery);
+	acpi_battery_quirks(battery);
 	return result;
 }
 
@@ -863,7 +870,7 @@ DECLARE_FILE_FUNCTIONS(alarm);
 		}, \
 	}
 
-static struct battery_file {
+static const struct battery_file {
 	struct file_operations ops;
 	mode_t mode;
 	const char *name;
@@ -948,9 +955,12 @@ static int battery_notify(struct notifier_block *nb,
 	struct acpi_battery *battery = container_of(nb, struct acpi_battery,
 						    pm_nb);
 	switch (mode) {
+	case PM_POST_HIBERNATION:
 	case PM_POST_SUSPEND:
-		sysfs_remove_battery(battery);
-		sysfs_add_battery(battery);
+		if (battery->bat.dev) {
+			sysfs_remove_battery(battery);
+			sysfs_add_battery(battery);
+		}
 		break;
 	}
 
@@ -975,25 +985,33 @@ static int acpi_battery_add(struct acpi_device *device)
 	if (ACPI_SUCCESS(acpi_get_handle(battery->device->handle,
 			"_BIX", &handle)))
 		set_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags);
-	acpi_battery_update(battery);
+	result = acpi_battery_update(battery);
+	if (result)
+		goto fail;
 #ifdef CONFIG_ACPI_PROCFS_POWER
 	result = acpi_battery_add_fs(device);
 #endif
-	if (!result) {
-		printk(KERN_INFO PREFIX "%s Slot [%s] (battery %s)\n",
-			ACPI_BATTERY_DEVICE_NAME, acpi_device_bid(device),
-			device->status.battery_present ? "present" : "absent");
-	} else {
+	if (result) {
 #ifdef CONFIG_ACPI_PROCFS_POWER
 		acpi_battery_remove_fs(device);
 #endif
-		kfree(battery);
+		goto fail;
 	}
 
+	printk(KERN_INFO PREFIX "%s Slot [%s] (battery %s)\n",
+		ACPI_BATTERY_DEVICE_NAME, acpi_device_bid(device),
+		device->status.battery_present ? "present" : "absent");
+
 	battery->pm_nb.notifier_call = battery_notify;
 	register_pm_notifier(&battery->pm_nb);
 
 	return result;
+
+fail:
+	sysfs_remove_battery(battery);
+	mutex_destroy(&battery->lock);
+	kfree(battery);
+	return result;
 }
 
 static int acpi_battery_remove(struct acpi_device *device, int type)

+ 2 - 2
drivers/acpi/dock.c

@@ -77,7 +77,7 @@ struct dock_dependent_device {
 	struct list_head list;
 	struct list_head hotplug_list;
 	acpi_handle handle;
-	struct acpi_dock_ops *ops;
+	const struct acpi_dock_ops *ops;
 	void *context;
 };
 
@@ -589,7 +589,7 @@ EXPORT_SYMBOL_GPL(unregister_dock_notifier);
  * the dock driver after _DCK is executed.
  */
 int
-register_hotplug_dock_device(acpi_handle handle, struct acpi_dock_ops *ops,
+register_hotplug_dock_device(acpi_handle handle, const struct acpi_dock_ops *ops,
 			     void *context)
 {
 	struct dock_dependent_device *dd;

+ 1 - 1
drivers/acpi/ec_sys.c

@@ -92,7 +92,7 @@ static ssize_t acpi_ec_write_io(struct file *f, const char __user *buf,
 	return count;
 }
 
-static struct file_operations acpi_ec_io_ops = {
+static const struct file_operations acpi_ec_io_ops = {
 	.owner = THIS_MODULE,
 	.open  = acpi_ec_open_io,
 	.read  = acpi_ec_read_io,

+ 1 - 1
drivers/acpi/fan.c

@@ -110,7 +110,7 @@ fan_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state)
 	return result;
 }
 
-static struct thermal_cooling_device_ops fan_cooling_ops = {
+static const struct thermal_cooling_device_ops fan_cooling_ops = {
 	.get_max_state = fan_get_max_state,
 	.get_cur_state = fan_get_cur_state,
 	.set_cur_state = fan_set_cur_state,

+ 23 - 19
drivers/acpi/osl.c

@@ -155,7 +155,7 @@ static u32 acpi_osi_handler(acpi_string interface, u32 supported)
 {
 	if (!strcmp("Linux", interface)) {
 
-		printk(KERN_NOTICE FW_BUG PREFIX
+		printk_once(KERN_NOTICE FW_BUG PREFIX
 			"BIOS _OSI(Linux) query %s%s\n",
 			osi_linux.enable ? "honored" : "ignored",
 			osi_linux.cmdline ? " via cmdline" :
@@ -237,8 +237,23 @@ void acpi_os_vprintf(const char *fmt, va_list args)
 #endif
 }
 
+#ifdef CONFIG_KEXEC
+static unsigned long acpi_rsdp;
+static int __init setup_acpi_rsdp(char *arg)
+{
+	acpi_rsdp = simple_strtoul(arg, NULL, 16);
+	return 0;
+}
+early_param("acpi_rsdp", setup_acpi_rsdp);
+#endif
+
 acpi_physical_address __init acpi_os_get_root_pointer(void)
 {
+#ifdef CONFIG_KEXEC
+	if (acpi_rsdp)
+		return acpi_rsdp;
+#endif
+
 	if (efi_enabled) {
 		if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
 			return efi.acpi20;
@@ -1083,7 +1098,13 @@ struct osi_setup_entry {
 	bool enable;
 };
 
-static struct osi_setup_entry __initdata osi_setup_entries[OSI_STRING_ENTRIES_MAX];
+static struct osi_setup_entry __initdata
+		osi_setup_entries[OSI_STRING_ENTRIES_MAX] = {
+	{"Module Device", true},
+	{"Processor Device", true},
+	{"3.0 _SCP Extensions", true},
+	{"Processor Aggregator Device", true},
+};
 
 void __init acpi_osi_setup(char *str)
 {
@@ -1332,23 +1353,6 @@ int acpi_resources_are_enforced(void)
 }
 EXPORT_SYMBOL(acpi_resources_are_enforced);
 
-/*
- * Create and initialize a spinlock.
- */
-acpi_status
-acpi_os_create_lock(acpi_spinlock *out_handle)
-{
-	spinlock_t *lock;
-
-	lock = ACPI_ALLOCATE(sizeof(spinlock_t));
-	if (!lock)
-		return AE_NO_MEMORY;
-	spin_lock_init(lock);
-	*out_handle = lock;
-
-	return AE_OK;
-}
-
 /*
  * Deallocate the memory for a spinlock.
  */

+ 58 - 0
drivers/acpi/pci_irq.c

@@ -303,6 +303,61 @@ void acpi_pci_irq_del_prt(struct pci_bus *bus)
 /* --------------------------------------------------------------------------
                           PCI Interrupt Routing Support
    -------------------------------------------------------------------------- */
+#ifdef CONFIG_X86_IO_APIC
+extern int noioapicquirk;
+extern int noioapicreroute;
+
+static int bridge_has_boot_interrupt_variant(struct pci_bus *bus)
+{
+	struct pci_bus *bus_it;
+
+	for (bus_it = bus ; bus_it ; bus_it = bus_it->parent) {
+		if (!bus_it->self)
+			return 0;
+		if (bus_it->self->irq_reroute_variant)
+			return bus_it->self->irq_reroute_variant;
+	}
+	return 0;
+}
+
+/*
+ * Some chipsets (e.g. Intel 6700PXH) generate a legacy INTx when the IRQ
+ * entry in the chipset's IO-APIC is masked (as, e.g. the RT kernel does
+ * during interrupt handling). When this INTx generation cannot be disabled,
+ * we reroute these interrupts to their legacy equivalent to get rid of
+ * spurious interrupts.
+ */
+static int acpi_reroute_boot_interrupt(struct pci_dev *dev,
+				       struct acpi_prt_entry *entry)
+{
+	if (noioapicquirk || noioapicreroute) {
+		return 0;
+	} else {
+		switch (bridge_has_boot_interrupt_variant(dev->bus)) {
+		case 0:
+			/* no rerouting necessary */
+			return 0;
+		case INTEL_IRQ_REROUTE_VARIANT:
+			/*
+			 * Remap according to INTx routing table in 6700PXH
+			 * specs, intel order number 302628-002, section
+			 * 2.15.2. Other chipsets (80332, ...) have the same
+			 * mapping and are handled here as well.
+			 */
+			dev_info(&dev->dev, "PCI IRQ %d -> rerouted to legacy "
+				 "IRQ %d\n", entry->index,
+				 (entry->index % 4) + 16);
+			entry->index = (entry->index % 4) + 16;
+			return 1;
+		default:
+			dev_warn(&dev->dev, "Cannot reroute IRQ %d to legacy "
+				 "IRQ: unknown mapping\n", entry->index);
+			return -1;
+		}
+	}
+}
+#endif /* CONFIG_X86_IO_APIC */
+
 static struct acpi_prt_entry *acpi_pci_irq_lookup(struct pci_dev *dev, int pin)
 {
 	struct acpi_prt_entry *entry;
@@ -311,6 +366,9 @@ static struct acpi_prt_entry *acpi_pci_irq_lookup(struct pci_dev *dev, int pin)
 
 	entry = acpi_pci_irq_find_prt_entry(dev, pin);
 	if (entry) {
+#ifdef CONFIG_X86_IO_APIC
+		acpi_reroute_boot_interrupt(dev, entry);
+#endif /* CONFIG_X86_IO_APIC */
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %s[%c] _PRT entry\n",
 				  pci_name(dev), pin_name(pin)));
 		return entry;

+ 2 - 1
drivers/acpi/pci_root.c

@@ -485,7 +485,8 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
 		root->secondary.end = 0xFF;
 		printk(KERN_WARNING FW_BUG PREFIX
 		       "no secondary bus range in _CRS\n");
-		status = acpi_evaluate_integer(device->handle, METHOD_NAME__BBN,					       NULL, &bus);
+		status = acpi_evaluate_integer(device->handle, METHOD_NAME__BBN,
+					       NULL, &bus);
 		if (ACPI_SUCCESS(status))
 			root->secondary.start = bus;
 		else if (status == AE_NOT_FOUND)

+ 1 - 1
drivers/acpi/processor_thermal.c

@@ -244,7 +244,7 @@ processor_set_cur_state(struct thermal_cooling_device *cdev,
 	return result;
 }
 
-struct thermal_cooling_device_ops processor_cooling_ops = {
+const struct thermal_cooling_device_ops processor_cooling_ops = {
 	.get_max_state = processor_get_max_state,
 	.get_cur_state = processor_get_cur_state,
 	.set_cur_state = processor_set_cur_state,

+ 11 - 2
drivers/acpi/sbs.c

@@ -130,6 +130,9 @@ struct acpi_sbs {
 
 #define to_acpi_sbs(x) container_of(x, struct acpi_sbs, charger)
 
+static int acpi_sbs_remove(struct acpi_device *device, int type);
+static int acpi_battery_get_state(struct acpi_battery *battery);
+
 static inline int battery_scale(int log)
 {
 	int scale = 1;
@@ -195,6 +198,8 @@ static int acpi_sbs_battery_get_property(struct power_supply *psy,
 
 	if ((!battery->present) && psp != POWER_SUPPLY_PROP_PRESENT)
 		return -ENODEV;
+
+	acpi_battery_get_state(battery);
 	switch (psp) {
 	case POWER_SUPPLY_PROP_STATUS:
 		if (battery->rate_now < 0)
@@ -225,11 +230,17 @@ static int acpi_sbs_battery_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_POWER_NOW:
 		val->intval = abs(battery->rate_now) *
 				acpi_battery_ipscale(battery) * 1000;
+		val->intval *= (acpi_battery_mode(battery)) ?
+				(battery->voltage_now *
+				acpi_battery_vscale(battery) / 1000) : 1;
 		break;
 	case POWER_SUPPLY_PROP_CURRENT_AVG:
 	case POWER_SUPPLY_PROP_POWER_AVG:
 		val->intval = abs(battery->rate_avg) *
 				acpi_battery_ipscale(battery) * 1000;
+		val->intval *= (acpi_battery_mode(battery)) ?
+				(battery->voltage_now *
+				acpi_battery_vscale(battery) / 1000) : 1;
 		break;
 	case POWER_SUPPLY_PROP_CAPACITY:
 		val->intval = battery->state_of_charge;
@@ -903,8 +914,6 @@ static void acpi_sbs_callback(void *context)
 	}
 }
 
-static int acpi_sbs_remove(struct acpi_device *device, int type);
-
 static int acpi_sbs_add(struct acpi_device *device)
 {
 	struct acpi_sbs *sbs;

+ 16 - 0
drivers/acpi/sleep.c

@@ -428,6 +428,22 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"),
 		},
 	},
+	{
+	.callback = init_old_suspend_ordering,
+	.ident = "Asus A8N-SLI DELUXE",
+	.matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+		DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"),
+		},
+	},
+	{
+	.callback = init_old_suspend_ordering,
+	.ident = "Asus A8N-SLI Premium",
+	.matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+		DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"),
+		},
+	},
 	{},
 };
 #endif /* CONFIG_SUSPEND */

+ 2 - 2
drivers/acpi/sysfs.c

@@ -149,12 +149,12 @@ static int param_get_debug_level(char *buffer, const struct kernel_param *kp)
 	return result;
 }
 
-static struct kernel_param_ops param_ops_debug_layer = {
+static const struct kernel_param_ops param_ops_debug_layer = {
 	.set = param_set_uint,
 	.get = param_get_debug_layer,
 };
 
-static struct kernel_param_ops param_ops_debug_level = {
+static const struct kernel_param_ops param_ops_debug_level = {
 	.set = param_set_uint,
 	.get = param_get_debug_level,
 };

+ 1 - 1
drivers/acpi/thermal.c

@@ -812,7 +812,7 @@ acpi_thermal_unbind_cooling_device(struct thermal_zone_device *thermal,
 				thermal_zone_unbind_cooling_device);
 }
 
-static struct thermal_zone_device_ops acpi_thermal_zone_ops = {
+static const struct thermal_zone_device_ops acpi_thermal_zone_ops = {
 	.bind = acpi_thermal_bind_cooling_device,
 	.unbind	= acpi_thermal_unbind_cooling_device,
 	.get_temp = thermal_get_temp,

+ 1 - 1
drivers/acpi/video.c

@@ -308,7 +308,7 @@ video_set_cur_state(struct thermal_cooling_device *cooling_dev, unsigned long st
 	return acpi_video_device_lcd_set_level(video, level);
 }
 
-static struct thermal_cooling_device_ops video_cooling_ops = {
+static const struct thermal_cooling_device_ops video_cooling_ops = {
 	.get_max_state = video_get_max_state,
 	.get_cur_state = video_get_cur_state,
 	.set_cur_state = video_set_cur_state,

+ 2 - 2
drivers/ata/libata-acpi.c

@@ -218,12 +218,12 @@ static void ata_acpi_dev_uevent(acpi_handle handle, u32 event, void *data)
 	ata_acpi_uevent(dev->link->ap, dev, event);
 }
 
-static struct acpi_dock_ops ata_acpi_dev_dock_ops = {
+static const struct acpi_dock_ops ata_acpi_dev_dock_ops = {
 	.handler = ata_acpi_dev_notify_dock,
 	.uevent = ata_acpi_dev_uevent,
 };
 
-static struct acpi_dock_ops ata_acpi_ap_dock_ops = {
+static const struct acpi_dock_ops ata_acpi_ap_dock_ops = {
 	.handler = ata_acpi_ap_notify_dock,
 	.uevent = ata_acpi_ap_uevent,
 };

+ 4 - 3
drivers/char/agp/intel-agp.h

@@ -90,9 +90,10 @@
 #define G4x_GMCH_SIZE_MASK	(0xf << 8)
 #define G4x_GMCH_SIZE_1M	(0x1 << 8)
 #define G4x_GMCH_SIZE_2M	(0x3 << 8)
-#define G4x_GMCH_SIZE_VT_1M	(0x9 << 8)
-#define G4x_GMCH_SIZE_VT_1_5M	(0xa << 8)
-#define G4x_GMCH_SIZE_VT_2M	(0xc << 8)
+#define G4x_GMCH_SIZE_VT_EN	(0x8 << 8)
+#define G4x_GMCH_SIZE_VT_1M	(G4x_GMCH_SIZE_1M | G4x_GMCH_SIZE_VT_EN)
+#define G4x_GMCH_SIZE_VT_1_5M	((0x2 << 8) | G4x_GMCH_SIZE_VT_EN)
+#define G4x_GMCH_SIZE_VT_2M	(G4x_GMCH_SIZE_2M | G4x_GMCH_SIZE_VT_EN)
 
 #define GFX_FLSH_CNTL		0x2170 /* 915+ */
 

+ 1 - 0
drivers/gpio/wm831x-gpio.c

@@ -180,6 +180,7 @@ static void wm831x_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 			break;
 		case WM831X_GPIO_PULL_UP:
 			pull = "pullup";
+			break;
 		default:
 			pull = "INVALID PULL";
 			break;

+ 4 - 1
drivers/gpu/drm/i915/i915_drv.h

@@ -262,6 +262,7 @@ enum intel_pch {
 };
 
 #define QUIRK_PIPEA_FORCE (1<<0)
+#define QUIRK_LVDS_SSC_DISABLE (1<<1)
 
 struct intel_fbdev;
 
@@ -1194,7 +1195,9 @@ void i915_gem_free_all_phys_object(struct drm_device *dev);
 void i915_gem_release(struct drm_device *dev, struct drm_file *file);
 
 uint32_t
-i915_gem_get_unfenced_gtt_alignment(struct drm_i915_gem_object *obj);
+i915_gem_get_unfenced_gtt_alignment(struct drm_device *dev,
+				    uint32_t size,
+				    int tiling_mode);
 
 /* i915_gem_gtt.c */
 void i915_gem_restore_gtt_mappings(struct drm_device *dev);

+ 35 - 36
drivers/gpu/drm/i915/i915_gem.c

@@ -1374,25 +1374,24 @@ i915_gem_free_mmap_offset(struct drm_i915_gem_object *obj)
 }
 
 static uint32_t
-i915_gem_get_gtt_size(struct drm_i915_gem_object *obj)
+i915_gem_get_gtt_size(struct drm_device *dev, uint32_t size, int tiling_mode)
 {
-	struct drm_device *dev = obj->base.dev;
-	uint32_t size;
+	uint32_t gtt_size;
 
 	if (INTEL_INFO(dev)->gen >= 4 ||
-	    obj->tiling_mode == I915_TILING_NONE)
-		return obj->base.size;
+	    tiling_mode == I915_TILING_NONE)
+		return size;
 
 	/* Previous chips need a power-of-two fence region when tiling */
 	if (INTEL_INFO(dev)->gen == 3)
-		size = 1024*1024;
+		gtt_size = 1024*1024;
 	else
-		size = 512*1024;
+		gtt_size = 512*1024;
 
-	while (size < obj->base.size)
-		size <<= 1;
+	while (gtt_size < size)
+		gtt_size <<= 1;
 
-	return size;
+	return gtt_size;
 }
 
 /**
@@ -1403,59 +1402,52 @@ i915_gem_get_gtt_size(struct drm_i915_gem_object *obj)
  * potential fence register mapping.
  */
 static uint32_t
-i915_gem_get_gtt_alignment(struct drm_i915_gem_object *obj)
+i915_gem_get_gtt_alignment(struct drm_device *dev,
+			   uint32_t size,
+			   int tiling_mode)
 {
-	struct drm_device *dev = obj->base.dev;
-
 	/*
 	 * Minimum alignment is 4k (GTT page size), but might be greater
 	 * if a fence register is needed for the object.
 	 */
 	if (INTEL_INFO(dev)->gen >= 4 ||
-	    obj->tiling_mode == I915_TILING_NONE)
+	    tiling_mode == I915_TILING_NONE)
 		return 4096;
 
 	/*
 	 * Previous chips need to be aligned to the size of the smallest
 	 * fence register that can contain the object.
 	 */
-	return i915_gem_get_gtt_size(obj);
+	return i915_gem_get_gtt_size(dev, size, tiling_mode);
 }
 
 /**
  * i915_gem_get_unfenced_gtt_alignment - return required GTT alignment for an
  *					 unfenced object
- * @obj: object to check
+ * @dev: the device
+ * @size: size of the object
+ * @tiling_mode: tiling mode of the object
  *
  * Return the required GTT alignment for an object, only taking into account
  * unfenced tiled surface requirements.
  */
 uint32_t
-i915_gem_get_unfenced_gtt_alignment(struct drm_i915_gem_object *obj)
+i915_gem_get_unfenced_gtt_alignment(struct drm_device *dev,
+				    uint32_t size,
+				    int tiling_mode)
 {
-	struct drm_device *dev = obj->base.dev;
-	int tile_height;
-
 	/*
 	 * Minimum alignment is 4k (GTT page size) for sane hw.
 	 */
 	if (INTEL_INFO(dev)->gen >= 4 || IS_G33(dev) ||
-	    obj->tiling_mode == I915_TILING_NONE)
+	    tiling_mode == I915_TILING_NONE)
 		return 4096;
 
-	/*
-	 * Older chips need unfenced tiled buffers to be aligned to the left
-	 * edge of an even tile row (where tile rows are counted as if the bo is
-	 * placed in a fenced gtt region).
+	/* Previous hardware however needs to be aligned to a power-of-two
+	 * tile height. The simplest method for determining this is to reuse
+	 * the power-of-tile object size.
 	 */
-	if (IS_GEN2(dev))
-		tile_height = 16;
-	else if (obj->tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev))
-		tile_height = 32;
-	else
-		tile_height = 8;
-
-	return tile_height * obj->stride * 2;
+	return i915_gem_get_gtt_size(dev, size, tiling_mode);
 }
 
 int
@@ -2744,9 +2736,16 @@ i915_gem_object_bind_to_gtt(struct drm_i915_gem_object *obj,
 		return -EINVAL;
 	}
 
-	fence_size = i915_gem_get_gtt_size(obj);
-	fence_alignment = i915_gem_get_gtt_alignment(obj);
-	unfenced_alignment = i915_gem_get_unfenced_gtt_alignment(obj);
+	fence_size = i915_gem_get_gtt_size(dev,
+					   obj->base.size,
+					   obj->tiling_mode);
+	fence_alignment = i915_gem_get_gtt_alignment(dev,
+						     obj->base.size,
+						     obj->tiling_mode);
+	unfenced_alignment =
+		i915_gem_get_unfenced_gtt_alignment(dev,
+						    obj->base.size,
+						    obj->tiling_mode);
 
 	if (alignment == 0)
 		alignment = map_and_fenceable ? fence_alignment :

+ 3 - 1
drivers/gpu/drm/i915/i915_gem_tiling.c

@@ -348,7 +348,9 @@ i915_gem_set_tiling(struct drm_device *dev, void *data,
 		/* Rebind if we need a change of alignment */
 		if (!obj->map_and_fenceable) {
 			u32 unfenced_alignment =
-				i915_gem_get_unfenced_gtt_alignment(obj);
+				i915_gem_get_unfenced_gtt_alignment(dev,
+								    obj->base.size,
+								    args->tiling_mode);
 			if (obj->gtt_offset & (unfenced_alignment - 1))
 				ret = i915_gem_object_unbind(obj);
 		}

+ 14 - 1
drivers/gpu/drm/i915/intel_display.c

@@ -4305,7 +4305,8 @@ static void intel_update_watermarks(struct drm_device *dev)
 
 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
 {
-	return dev_priv->lvds_use_ssc && i915_panel_use_ssc;
+	return dev_priv->lvds_use_ssc && i915_panel_use_ssc
+		&& !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
 }
 
 static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
@@ -7810,6 +7811,15 @@ static void quirk_pipea_force (struct drm_device *dev)
 	DRM_DEBUG_DRIVER("applying pipe a force quirk\n");
 }
 
+/*
+ * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
+ */
+static void quirk_ssc_force_disable(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
+}
+
 struct intel_quirk {
 	int device;
 	int subsystem_vendor;
@@ -7838,6 +7848,9 @@ struct intel_quirk intel_quirks[] = {
 	/* 855 & before need to leave pipe A & dpll A up */
 	{ 0x3582, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
 	{ 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
+
+	/* Lenovo U160 cannot use SSC on LVDS */
+	{ 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
 };
 
 static void intel_init_quirks(struct drm_device *dev)

+ 1 - 1
drivers/gpu/drm/radeon/evergreen.c

@@ -2000,7 +2000,7 @@ static void evergreen_gpu_init(struct radeon_device *rdev)
 			gb_backend_map = 0x66442200;
 			break;
 		case CHIP_JUNIPER:
-			gb_backend_map = 0x00006420;
+			gb_backend_map = 0x00002200;
 			break;
 		default:
 			gb_backend_map =

+ 7 - 2
drivers/gpu/drm/radeon/evergreen_blit_kms.c

@@ -252,7 +252,7 @@ draw_auto(struct radeon_device *rdev)
 
 }
 
-/* emits 36 */
+/* emits 39 */
 static void
 set_default_state(struct radeon_device *rdev)
 {
@@ -531,6 +531,11 @@ set_default_state(struct radeon_device *rdev)
 		radeon_ring_write(rdev, (SQ_DYN_GPR_CNTL_PS_FLUSH_REQ - PACKET3_SET_CONFIG_REG_START) >> 2);
 		radeon_ring_write(rdev, 0);
 
+		/* setup LDS */
+		radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 1));
+		radeon_ring_write(rdev, (SQ_LDS_RESOURCE_MGMT - PACKET3_SET_CONFIG_REG_START) >> 2);
+		radeon_ring_write(rdev, 0x10001000);
+
 		/* SQ config */
 		radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 11));
 		radeon_ring_write(rdev, (SQ_CONFIG - PACKET3_SET_CONFIG_REG_START) >> 2);
@@ -773,7 +778,7 @@ int evergreen_blit_prepare_copy(struct radeon_device *rdev, int size_bytes)
 	/* calculate number of loops correctly */
 	ring_size = num_loops * dwords_per_loop;
 	/* set default  + shaders */
-	ring_size += 52; /* shaders + def state */
+	ring_size += 55; /* shaders + def state */
 	ring_size += 10; /* fence emit for VB IB */
 	ring_size += 5; /* done copy */
 	ring_size += 10; /* fence emit for done copy */

+ 15 - 6
drivers/gpu/drm/radeon/radeon_bios.c

@@ -331,7 +331,7 @@ static bool avivo_read_disabled_bios(struct radeon_device *rdev)
 
 	seprom_cntl1 = RREG32(RADEON_SEPROM_CNTL1);
 	viph_control = RREG32(RADEON_VIPH_CONTROL);
-	bus_cntl = RREG32(RADEON_BUS_CNTL);
+	bus_cntl = RREG32(RV370_BUS_CNTL);
 	d1vga_control = RREG32(AVIVO_D1VGA_CONTROL);
 	d2vga_control = RREG32(AVIVO_D2VGA_CONTROL);
 	vga_render_control = RREG32(AVIVO_VGA_RENDER_CONTROL);
@@ -350,7 +350,7 @@ static bool avivo_read_disabled_bios(struct radeon_device *rdev)
 	WREG32(RADEON_VIPH_CONTROL, (viph_control & ~RADEON_VIPH_EN));
 
 	/* enable the rom */
-	WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM));
+	WREG32(RV370_BUS_CNTL, (bus_cntl & ~RV370_BUS_BIOS_DIS_ROM));
 
 	/* Disable VGA mode */
 	WREG32(AVIVO_D1VGA_CONTROL,
@@ -367,7 +367,7 @@ static bool avivo_read_disabled_bios(struct radeon_device *rdev)
 	/* restore regs */
 	WREG32(RADEON_SEPROM_CNTL1, seprom_cntl1);
 	WREG32(RADEON_VIPH_CONTROL, viph_control);
-	WREG32(RADEON_BUS_CNTL, bus_cntl);
+	WREG32(RV370_BUS_CNTL, bus_cntl);
 	WREG32(AVIVO_D1VGA_CONTROL, d1vga_control);
 	WREG32(AVIVO_D2VGA_CONTROL, d2vga_control);
 	WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control);
@@ -390,7 +390,10 @@ static bool legacy_read_disabled_bios(struct radeon_device *rdev)
 
 	seprom_cntl1 = RREG32(RADEON_SEPROM_CNTL1);
 	viph_control = RREG32(RADEON_VIPH_CONTROL);
-	bus_cntl = RREG32(RADEON_BUS_CNTL);
+	if (rdev->flags & RADEON_IS_PCIE)
+		bus_cntl = RREG32(RV370_BUS_CNTL);
+	else
+		bus_cntl = RREG32(RADEON_BUS_CNTL);
 	crtc_gen_cntl = RREG32(RADEON_CRTC_GEN_CNTL);
 	crtc2_gen_cntl = 0;
 	crtc_ext_cntl = RREG32(RADEON_CRTC_EXT_CNTL);
@@ -412,7 +415,10 @@ static bool legacy_read_disabled_bios(struct radeon_device *rdev)
 	WREG32(RADEON_VIPH_CONTROL, (viph_control & ~RADEON_VIPH_EN));
 
 	/* enable the rom */
-	WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM));
+	if (rdev->flags & RADEON_IS_PCIE)
+		WREG32(RV370_BUS_CNTL, (bus_cntl & ~RV370_BUS_BIOS_DIS_ROM));
+	else
+		WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM));
 
 	/* Turn off mem requests and CRTC for both controllers */
 	WREG32(RADEON_CRTC_GEN_CNTL,
@@ -439,7 +445,10 @@ static bool legacy_read_disabled_bios(struct radeon_device *rdev)
 	/* restore regs */
 	WREG32(RADEON_SEPROM_CNTL1, seprom_cntl1);
 	WREG32(RADEON_VIPH_CONTROL, viph_control);
-	WREG32(RADEON_BUS_CNTL, bus_cntl);
+	if (rdev->flags & RADEON_IS_PCIE)
+		WREG32(RV370_BUS_CNTL, bus_cntl);
+	else
+		WREG32(RADEON_BUS_CNTL, bus_cntl);
 	WREG32(RADEON_CRTC_GEN_CNTL, crtc_gen_cntl);
 	if (!(rdev->flags & RADEON_SINGLE_CRTC)) {
 		WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl);

+ 6 - 0
drivers/gpu/drm/radeon/radeon_connectors.c

@@ -52,6 +52,12 @@ void radeon_connector_hotplug(struct drm_connector *connector)
 	struct radeon_device *rdev = dev->dev_private;
 	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
 
+	/* bail if the connector does not have hpd pin, e.g.,
+	 * VGA, TV, etc.
+	 */
+	if (radeon_connector->hpd.hpd == RADEON_HPD_NONE)
+		return;
+
 	radeon_hpd_set_polarity(rdev, radeon_connector->hpd.hpd);
 
 	/* powering up/down the eDP panel generates hpd events which

+ 2 - 0
drivers/gpu/drm/radeon/radeon_reg.h

@@ -300,6 +300,8 @@
 #       define RADEON_BUS_READ_BURST         (1 << 30)
 #define RADEON_BUS_CNTL1                    0x0034
 #       define RADEON_BUS_WAIT_ON_LOCK_EN    (1 << 4)
+#define RV370_BUS_CNTL                      0x004c
+#       define RV370_BUS_BIOS_DIS_ROM        (1 << 2)
 /* rv370/rv380, rv410, r423/r430/r480, r5xx */
 #define RADEON_MSI_REARM_EN		    0x0160
 #	define RV370_MSI_REARM_EN	     (1 << 0)

+ 3 - 3
drivers/gpu/drm/radeon/rs600.c

@@ -426,7 +426,7 @@ int rs600_gart_init(struct radeon_device *rdev)
 	return radeon_gart_table_vram_alloc(rdev);
 }
 
-int rs600_gart_enable(struct radeon_device *rdev)
+static int rs600_gart_enable(struct radeon_device *rdev)
 {
 	u32 tmp;
 	int r, i;
@@ -440,8 +440,8 @@ int rs600_gart_enable(struct radeon_device *rdev)
 		return r;
 	radeon_gart_restore(rdev);
 	/* Enable bus master */
-	tmp = RREG32(R_00004C_BUS_CNTL) & C_00004C_BUS_MASTER_DIS;
-	WREG32(R_00004C_BUS_CNTL, tmp);
+	tmp = RREG32(RADEON_BUS_CNTL) & ~RS600_BUS_MASTER_DIS;
+	WREG32(RADEON_BUS_CNTL, tmp);
 	/* FIXME: setup default page */
 	WREG32_MC(R_000100_MC_PT0_CNTL,
 		  (S_000100_EFFECTIVE_L2_CACHE_SIZE(6) |

+ 5 - 5
drivers/hwmon/adm1275.c

@@ -53,23 +53,23 @@ static int adm1275_probe(struct i2c_client *client,
 	info->direct[PSC_VOLTAGE_IN] = true;
 	info->direct[PSC_VOLTAGE_OUT] = true;
 	info->direct[PSC_CURRENT_OUT] = true;
-	info->m[PSC_CURRENT_OUT] = 800;
+	info->m[PSC_CURRENT_OUT] = 807;
 	info->b[PSC_CURRENT_OUT] = 20475;
 	info->R[PSC_CURRENT_OUT] = -1;
 	info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
 
 	if (config & ADM1275_VRANGE) {
-		info->m[PSC_VOLTAGE_IN] = 19045;
+		info->m[PSC_VOLTAGE_IN] = 19199;
 		info->b[PSC_VOLTAGE_IN] = 0;
 		info->R[PSC_VOLTAGE_IN] = -2;
-		info->m[PSC_VOLTAGE_OUT] = 19045;
+		info->m[PSC_VOLTAGE_OUT] = 19199;
 		info->b[PSC_VOLTAGE_OUT] = 0;
 		info->R[PSC_VOLTAGE_OUT] = -2;
 	} else {
-		info->m[PSC_VOLTAGE_IN] = 6666;
+		info->m[PSC_VOLTAGE_IN] = 6720;
 		info->b[PSC_VOLTAGE_IN] = 0;
 		info->R[PSC_VOLTAGE_IN] = -1;
-		info->m[PSC_VOLTAGE_OUT] = 6666;
+		info->m[PSC_VOLTAGE_OUT] = 6720;
 		info->b[PSC_VOLTAGE_OUT] = 0;
 		info->R[PSC_VOLTAGE_OUT] = -1;
 	}

+ 1 - 0
drivers/hwmon/asus_atk0110.c

@@ -674,6 +674,7 @@ static int atk_debugfs_gitm_get(void *p, u64 *val)
 	else
 		err = -EIO;
 
+	ACPI_FREE(ret);
 	return err;
 }
 

+ 1 - 1
drivers/hwmon/it87.c

@@ -1538,7 +1538,7 @@ static struct attribute *it87_attributes_label[] = {
 };
 
 static const struct attribute_group it87_group_label = {
-	.attrs = it87_attributes_vid,
+	.attrs = it87_attributes_label,
 };
 
 /* SuperIO detection - will change isa_address if a chip is found */

+ 11 - 0
drivers/hwmon/max1111.c

@@ -40,6 +40,8 @@ struct max1111_data {
 	struct spi_transfer	xfer[2];
 	uint8_t *tx_buf;
 	uint8_t *rx_buf;
+	struct mutex		drvdata_lock;
+	/* protect msg, xfer and buffers from multiple access */
 };
 
 static int max1111_read(struct device *dev, int channel)
@@ -48,6 +50,9 @@ static int max1111_read(struct device *dev, int channel)
 	uint8_t v1, v2;
 	int err;
 
+	/* writing to drvdata struct is not thread safe, wait on mutex */
+	mutex_lock(&data->drvdata_lock);
+
 	data->tx_buf[0] = (channel << MAX1111_CTRL_SEL_SH) |
 		MAX1111_CTRL_PD0 | MAX1111_CTRL_PD1 |
 		MAX1111_CTRL_SGL | MAX1111_CTRL_UNI | MAX1111_CTRL_STR;
@@ -55,12 +60,15 @@ static int max1111_read(struct device *dev, int channel)
 	err = spi_sync(data->spi, &data->msg);
 	if (err < 0) {
 		dev_err(dev, "spi_sync failed with %d\n", err);
+		mutex_unlock(&data->drvdata_lock);
 		return err;
 	}
 
 	v1 = data->rx_buf[0];
 	v2 = data->rx_buf[1];
 
+	mutex_unlock(&data->drvdata_lock);
+
 	if ((v1 & 0xc0) || (v2 & 0x3f))
 		return -EINVAL;
 
@@ -176,6 +184,8 @@ static int __devinit max1111_probe(struct spi_device *spi)
 	if (err)
 		goto err_free_data;
 
+	mutex_init(&data->drvdata_lock);
+
 	data->spi = spi;
 	spi_set_drvdata(spi, data);
 
@@ -213,6 +223,7 @@ static int __devexit max1111_remove(struct spi_device *spi)
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group);
+	mutex_destroy(&data->drvdata_lock);
 	kfree(data->rx_buf);
 	kfree(data->tx_buf);
 	kfree(data);

+ 10 - 10
drivers/hwmon/pmbus_core.c

@@ -362,8 +362,8 @@ static struct pmbus_data *pmbus_update_device(struct device *dev)
  * Convert linear sensor values to milli- or micro-units
  * depending on sensor type.
  */
-static int pmbus_reg2data_linear(struct pmbus_data *data,
-				 struct pmbus_sensor *sensor)
+static long pmbus_reg2data_linear(struct pmbus_data *data,
+				  struct pmbus_sensor *sensor)
 {
 	s16 exponent;
 	s32 mantissa;
@@ -397,15 +397,15 @@ static int pmbus_reg2data_linear(struct pmbus_data *data,
 	else
 		val >>= -exponent;
 
-	return (int)val;
+	return val;
 }
 
 /*
  * Convert direct sensor values to milli- or micro-units
  * depending on sensor type.
  */
-static int pmbus_reg2data_direct(struct pmbus_data *data,
-				 struct pmbus_sensor *sensor)
+static long pmbus_reg2data_direct(struct pmbus_data *data,
+				  struct pmbus_sensor *sensor)
 {
 	long val = (s16) sensor->data;
 	long m, b, R;
@@ -440,12 +440,12 @@ static int pmbus_reg2data_direct(struct pmbus_data *data,
 		R++;
 	}
 
-	return (int)((val - b) / m);
+	return (val - b) / m;
 }
 
-static int pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor)
+static long pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor)
 {
-	int val;
+	long val;
 
 	if (data->info->direct[sensor->class])
 		val = pmbus_reg2data_direct(data, sensor);
@@ -619,7 +619,7 @@ static int pmbus_get_boolean(struct pmbus_data *data, int index, int *val)
 	if (!s1 && !s2)
 		*val = !!regval;
 	else {
-		int v1, v2;
+		long v1, v2;
 		struct pmbus_sensor *sensor1, *sensor2;
 
 		sensor1 = &data->sensors[s1];
@@ -661,7 +661,7 @@ static ssize_t pmbus_show_sensor(struct device *dev,
 	if (sensor->data < 0)
 		return sensor->data;
 
-	return snprintf(buf, PAGE_SIZE, "%d\n", pmbus_reg2data(data, sensor));
+	return snprintf(buf, PAGE_SIZE, "%ld\n", pmbus_reg2data(data, sensor));
 }
 
 static ssize_t pmbus_set_sensor(struct device *dev,

+ 8 - 0
drivers/media/dvb/dvb-core/dvb_frontend.c

@@ -1988,6 +1988,14 @@ static int dvb_frontend_open(struct inode *inode, struct file *file)
 	if (dvbdev->users == -1 && fe->ops.ts_bus_ctrl) {
 		if ((ret = fe->ops.ts_bus_ctrl(fe, 1)) < 0)
 			goto err0;
+
+		/* If we took control of the bus, we need to force
+		   reinitialization.  This is because many ts_bus_ctrl()
+		   functions strobe the RESET pin on the demod, and if the
+		   frontend thread already exists then the dvb_init() routine
+		   won't get called (which is what usually does initial
+		   register configuration). */
+		fepriv->reinitialise = 1;
 	}
 
 	if ((ret = dvb_generic_open (inode, file)) < 0)

+ 2 - 2
drivers/media/radio/Kconfig

@@ -168,7 +168,7 @@ config RADIO_MAXIRADIO
 
 config RADIO_MIROPCM20
 	tristate "miroSOUND PCM20 radio"
-	depends on ISA && VIDEO_V4L2 && SND
+	depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND
 	select SND_ISA
 	select SND_MIRO
 	---help---
@@ -201,7 +201,7 @@ config RADIO_SF16FMI
 
 config RADIO_SF16FMR2
 	tristate "SF16FMR2 Radio"
-	depends on ISA && VIDEO_V4L2
+	depends on ISA && VIDEO_V4L2 && SND
 	---help---
 	  Choose Y here if you have one of these FM radio cards.
 

+ 2 - 2
drivers/media/radio/si4713-i2c.c

@@ -1033,7 +1033,7 @@ static int si4713_write_econtrol_string(struct si4713_device *sdev,
 		char ps_name[MAX_RDS_PS_NAME + 1];
 
 		len = control->size - 1;
-		if (len > MAX_RDS_PS_NAME) {
+		if (len < 0 || len > MAX_RDS_PS_NAME) {
 			rval = -ERANGE;
 			goto exit;
 		}
@@ -1057,7 +1057,7 @@ static int si4713_write_econtrol_string(struct si4713_device *sdev,
 		char radio_text[MAX_RDS_RADIO_TEXT + 1];
 
 		len = control->size - 1;
-		if (len > MAX_RDS_RADIO_TEXT) {
+		if (len < 0 || len > MAX_RDS_RADIO_TEXT) {
 			rval = -ERANGE;
 			goto exit;
 		}

+ 5 - 4
drivers/media/rc/mceusb.c

@@ -558,9 +558,10 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf,
 				 inout, data1);
 			break;
 		case MCE_CMD_S_TIMEOUT:
-			/* value is in units of 50us, so x*50/100 or x/2 ms */
+			/* value is in units of 50us, so x*50/1000 ms */
 			dev_info(dev, "%s receive timeout of %d ms\n",
-				 inout, ((data1 << 8) | data2) / 2);
+				 inout,
+				 ((data1 << 8) | data2) * MCE_TIME_UNIT / 1000);
 			break;
 		case MCE_CMD_G_TIMEOUT:
 			dev_info(dev, "Get receive timeout\n");
@@ -847,7 +848,7 @@ static void mceusb_handle_command(struct mceusb_dev *ir, int index)
 	switch (ir->buf_in[index]) {
 	/* 2-byte return value commands */
 	case MCE_CMD_S_TIMEOUT:
-		ir->rc->timeout = US_TO_NS((hi << 8 | lo) / 2);
+		ir->rc->timeout = US_TO_NS((hi << 8 | lo) * MCE_TIME_UNIT);
 		break;
 
 	/* 1-byte return value commands */
@@ -1078,7 +1079,7 @@ static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir)
 	rc->priv = ir;
 	rc->driver_type = RC_DRIVER_IR_RAW;
 	rc->allowed_protos = RC_TYPE_ALL;
-	rc->timeout = US_TO_NS(1000);
+	rc->timeout = MS_TO_NS(100);
 	if (!ir->flags.no_tx) {
 		rc->s_tx_mask = mceusb_set_tx_mask;
 		rc->s_tx_carrier = mceusb_set_tx_carrier;

+ 1 - 1
drivers/media/rc/nuvoton-cir.c

@@ -1110,7 +1110,7 @@ static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
 	rdev->dev.parent = &pdev->dev;
 	rdev->driver_name = NVT_DRIVER_NAME;
 	rdev->map_name = RC_MAP_RC6_MCE;
-	rdev->timeout = US_TO_NS(1000);
+	rdev->timeout = MS_TO_NS(100);
 	/* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */
 	rdev->rx_resolution = US_TO_NS(CIR_SAMPLE_PERIOD);
 #if 0

+ 2 - 7
drivers/media/video/cx23885/cx23885-core.c

@@ -2060,12 +2060,8 @@ static int __devinit cx23885_initdev(struct pci_dev *pci_dev,
 		goto fail_irq;
 	}
 
-	if (!pci_enable_msi(pci_dev))
-		err = request_irq(pci_dev->irq, cx23885_irq,
-				  IRQF_DISABLED, dev->name, dev);
-	else
-		err = request_irq(pci_dev->irq, cx23885_irq,
-				  IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
+	err = request_irq(pci_dev->irq, cx23885_irq,
+			  IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
 	if (err < 0) {
 		printk(KERN_ERR "%s: can't get IRQ %d\n",
 		       dev->name, pci_dev->irq);
@@ -2114,7 +2110,6 @@ static void __devexit cx23885_finidev(struct pci_dev *pci_dev)
 
 	/* unregister stuff */
 	free_irq(pci_dev->irq, dev);
-	pci_disable_msi(pci_dev);
 
 	cx23885_dev_unregister(dev);
 	v4l2_device_unregister(v4l2_dev);

+ 12 - 4
drivers/media/video/tuner-core.c

@@ -714,10 +714,19 @@ static int tuner_remove(struct i2c_client *client)
  * returns 0.
  * This function is needed for boards that have a separate tuner for
  * radio (like devices with tea5767).
+ * NOTE: mt20xx uses V4L2_TUNER_DIGITAL_TV and calls set_tv_freq to
+ *       select a TV frequency. So, t_mode = T_ANALOG_TV could actually
+ *	 be used to represent a Digital TV too.
  */
 static inline int check_mode(struct tuner *t, enum v4l2_tuner_type mode)
 {
-	if ((1 << mode & t->mode_mask) == 0)
+	int t_mode;
+	if (mode == V4L2_TUNER_RADIO)
+		t_mode = T_RADIO;
+	else
+		t_mode = T_ANALOG_TV;
+
+	if ((t_mode & t->mode_mask) == 0)
 		return -EINVAL;
 
 	return 0;
@@ -984,7 +993,7 @@ static void tuner_status(struct dvb_frontend *fe)
 	case V4L2_TUNER_RADIO:
 		p = "radio";
 		break;
-	case V4L2_TUNER_DIGITAL_TV:
+	case V4L2_TUNER_DIGITAL_TV: /* Used by mt20xx */
 		p = "digital TV";
 		break;
 	case V4L2_TUNER_ANALOG_TV:
@@ -1135,9 +1144,8 @@ static int tuner_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
 		return 0;
 	if (vt->type == t->mode && analog_ops->get_afc)
 		vt->afc = analog_ops->get_afc(&t->fe);
-	if (vt->type == V4L2_TUNER_ANALOG_TV)
+	if (t->mode != V4L2_TUNER_RADIO) {
 		vt->capability |= V4L2_TUNER_CAP_NORM;
-	if (vt->type != V4L2_TUNER_RADIO) {
 		vt->rangelow = tv_range[0] * 16;
 		vt->rangehigh = tv_range[1] * 16;
 		return 0;

+ 50 - 27
drivers/mmc/core/mmc.c

@@ -247,12 +247,12 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
 		return 0;
 
 	/* Version is coded in the CSD_STRUCTURE byte in the EXT_CSD register */
+	card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE];
 	if (card->csd.structure == 3) {
-		int ext_csd_struct = ext_csd[EXT_CSD_STRUCTURE];
-		if (ext_csd_struct > 2) {
+		if (card->ext_csd.raw_ext_csd_structure > 2) {
 			printk(KERN_ERR "%s: unrecognised EXT_CSD structure "
 				"version %d\n", mmc_hostname(card->host),
-					ext_csd_struct);
+					card->ext_csd.raw_ext_csd_structure);
 			err = -EINVAL;
 			goto out;
 		}
@@ -266,6 +266,10 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
 		goto out;
 	}
 
+	card->ext_csd.raw_sectors[0] = ext_csd[EXT_CSD_SEC_CNT + 0];
+	card->ext_csd.raw_sectors[1] = ext_csd[EXT_CSD_SEC_CNT + 1];
+	card->ext_csd.raw_sectors[2] = ext_csd[EXT_CSD_SEC_CNT + 2];
+	card->ext_csd.raw_sectors[3] = ext_csd[EXT_CSD_SEC_CNT + 3];
 	if (card->ext_csd.rev >= 2) {
 		card->ext_csd.sectors =
 			ext_csd[EXT_CSD_SEC_CNT + 0] << 0 |
@@ -277,7 +281,7 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
 		if (card->ext_csd.sectors > (2u * 1024 * 1024 * 1024) / 512)
 			mmc_card_set_blockaddr(card);
 	}
-
+	card->ext_csd.raw_card_type = ext_csd[EXT_CSD_CARD_TYPE];
 	switch (ext_csd[EXT_CSD_CARD_TYPE] & EXT_CSD_CARD_TYPE_MASK) {
 	case EXT_CSD_CARD_TYPE_DDR_52 | EXT_CSD_CARD_TYPE_52 |
 	     EXT_CSD_CARD_TYPE_26:
@@ -307,6 +311,11 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
 			mmc_hostname(card->host));
 	}
 
+	card->ext_csd.raw_s_a_timeout = ext_csd[EXT_CSD_S_A_TIMEOUT];
+	card->ext_csd.raw_erase_timeout_mult =
+		ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT];
+	card->ext_csd.raw_hc_erase_grp_size =
+		ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
 	if (card->ext_csd.rev >= 3) {
 		u8 sa_shift = ext_csd[EXT_CSD_S_A_TIMEOUT];
 		card->ext_csd.part_config = ext_csd[EXT_CSD_PART_CONFIG];
@@ -334,6 +343,16 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
 		card->ext_csd.boot_size = ext_csd[EXT_CSD_BOOT_MULT] << 17;
 	}
 
+	card->ext_csd.raw_hc_erase_gap_size =
+		ext_csd[EXT_CSD_PARTITION_ATTRIBUTE];
+	card->ext_csd.raw_sec_trim_mult =
+		ext_csd[EXT_CSD_SEC_TRIM_MULT];
+	card->ext_csd.raw_sec_erase_mult =
+		ext_csd[EXT_CSD_SEC_ERASE_MULT];
+	card->ext_csd.raw_sec_feature_support =
+		ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT];
+	card->ext_csd.raw_trim_mult =
+		ext_csd[EXT_CSD_TRIM_MULT];
 	if (card->ext_csd.rev >= 4) {
 		/*
 		 * Enhanced area feature support -- check whether the eMMC
@@ -341,7 +360,7 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
 		 * area offset and size to user by adding sysfs interface.
 		 */
 		if ((ext_csd[EXT_CSD_PARTITION_SUPPORT] & 0x2) &&
-				(ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) {
+		    (ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) {
 			u8 hc_erase_grp_sz =
 				ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
 			u8 hc_wp_grp_sz =
@@ -401,17 +420,17 @@ static inline void mmc_free_ext_csd(u8 *ext_csd)
 }
 
 
-static int mmc_compare_ext_csds(struct mmc_card *card, u8 *ext_csd,
-			unsigned bus_width)
+static int mmc_compare_ext_csds(struct mmc_card *card, unsigned bus_width)
 {
 	u8 *bw_ext_csd;
 	int err;
 
+	if (bus_width == MMC_BUS_WIDTH_1)
+		return 0;
+
 	err = mmc_get_ext_csd(card, &bw_ext_csd);
-	if (err)
-		return err;
 
-	if ((ext_csd == NULL || bw_ext_csd == NULL)) {
+	if (err || bw_ext_csd == NULL) {
 		if (bus_width != MMC_BUS_WIDTH_1)
 			err = -EINVAL;
 		goto out;
@@ -421,35 +440,40 @@ static int mmc_compare_ext_csds(struct mmc_card *card, u8 *ext_csd,
 		goto out;
 
 	/* only compare read only fields */
-	err = (!(ext_csd[EXT_CSD_PARTITION_SUPPORT] ==
+	err = (!(card->ext_csd.raw_partition_support ==
 			bw_ext_csd[EXT_CSD_PARTITION_SUPPORT]) &&
-		(ext_csd[EXT_CSD_ERASED_MEM_CONT] ==
+		(card->ext_csd.raw_erased_mem_count ==
 			bw_ext_csd[EXT_CSD_ERASED_MEM_CONT]) &&
-		(ext_csd[EXT_CSD_REV] ==
+		(card->ext_csd.rev ==
 			bw_ext_csd[EXT_CSD_REV]) &&
-		(ext_csd[EXT_CSD_STRUCTURE] ==
+		(card->ext_csd.raw_ext_csd_structure ==
 			bw_ext_csd[EXT_CSD_STRUCTURE]) &&
-		(ext_csd[EXT_CSD_CARD_TYPE] ==
+		(card->ext_csd.raw_card_type ==
 			bw_ext_csd[EXT_CSD_CARD_TYPE]) &&
-		(ext_csd[EXT_CSD_S_A_TIMEOUT] ==
+		(card->ext_csd.raw_s_a_timeout ==
 			bw_ext_csd[EXT_CSD_S_A_TIMEOUT]) &&
-		(ext_csd[EXT_CSD_HC_WP_GRP_SIZE] ==
+		(card->ext_csd.raw_hc_erase_gap_size ==
 			bw_ext_csd[EXT_CSD_HC_WP_GRP_SIZE]) &&
-		(ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT] ==
+		(card->ext_csd.raw_erase_timeout_mult ==
 			bw_ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT]) &&
-		(ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] ==
+		(card->ext_csd.raw_hc_erase_grp_size ==
 			bw_ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]) &&
-		(ext_csd[EXT_CSD_SEC_TRIM_MULT] ==
+		(card->ext_csd.raw_sec_trim_mult ==
 			bw_ext_csd[EXT_CSD_SEC_TRIM_MULT]) &&
-		(ext_csd[EXT_CSD_SEC_ERASE_MULT] ==
+		(card->ext_csd.raw_sec_erase_mult ==
 			bw_ext_csd[EXT_CSD_SEC_ERASE_MULT]) &&
-		(ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT] ==
+		(card->ext_csd.raw_sec_feature_support ==
 			bw_ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]) &&
-		(ext_csd[EXT_CSD_TRIM_MULT] ==
+		(card->ext_csd.raw_trim_mult ==
 			bw_ext_csd[EXT_CSD_TRIM_MULT]) &&
-		memcmp(&ext_csd[EXT_CSD_SEC_CNT],
-		       &bw_ext_csd[EXT_CSD_SEC_CNT],
-		       4) != 0);
+		(card->ext_csd.raw_sectors[0] ==
+			bw_ext_csd[EXT_CSD_SEC_CNT + 0]) &&
+		(card->ext_csd.raw_sectors[1] ==
+			bw_ext_csd[EXT_CSD_SEC_CNT + 1]) &&
+		(card->ext_csd.raw_sectors[2] ==
+			bw_ext_csd[EXT_CSD_SEC_CNT + 2]) &&
+		(card->ext_csd.raw_sectors[3] ==
+			bw_ext_csd[EXT_CSD_SEC_CNT + 3]));
 	if (err)
 		err = -EINVAL;
 
@@ -770,7 +794,6 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 				 */
 				if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST))
 					err = mmc_compare_ext_csds(card,
-						ext_csd,
 						bus_width);
 				else
 					err = mmc_bus_test(card, bus_width);

+ 3 - 3
drivers/net/bonding/bond_main.c

@@ -1428,9 +1428,9 @@ out:
 	return features;
 }
 
-#define BOND_VLAN_FEATURES	(NETIF_F_ALL_TX_OFFLOADS | \
-				 NETIF_F_SOFT_FEATURES | \
-				 NETIF_F_LRO)
+#define BOND_VLAN_FEATURES	(NETIF_F_ALL_CSUM | NETIF_F_SG | \
+				 NETIF_F_FRAGLIST | NETIF_F_ALL_TSO | \
+				 NETIF_F_HIGHDMA | NETIF_F_LRO)
 
 static void bond_compute_features(struct bonding *bond)
 {

+ 19 - 5
drivers/net/gianfar.c

@@ -2289,6 +2289,23 @@ static int gfar_set_mac_address(struct net_device *dev)
 	return 0;
 }
 
+/* Check if rx parser should be activated */
+void gfar_check_rx_parser_mode(struct gfar_private *priv)
+{
+	struct gfar __iomem *regs;
+	u32 tempval;
+
+	regs = priv->gfargrp[0].regs;
+
+	tempval = gfar_read(&regs->rctrl);
+	/* If parse is no longer required, then disable parser */
+	if (tempval & RCTRL_REQ_PARSER)
+		tempval |= RCTRL_PRSDEP_INIT;
+	else
+		tempval &= ~RCTRL_PRSDEP_INIT;
+	gfar_write(&regs->rctrl, tempval);
+}
+
 
 /* Enables and disables VLAN insertion/extraction */
 static void gfar_vlan_rx_register(struct net_device *dev,
@@ -2325,12 +2342,9 @@ static void gfar_vlan_rx_register(struct net_device *dev,
 		/* Disable VLAN tag extraction */
 		tempval = gfar_read(&regs->rctrl);
 		tempval &= ~RCTRL_VLEX;
-		/* If parse is no longer required, then disable parser */
-		if (tempval & RCTRL_REQ_PARSER)
-			tempval |= RCTRL_PRSDEP_INIT;
-		else
-			tempval &= ~RCTRL_PRSDEP_INIT;
 		gfar_write(&regs->rctrl, tempval);
+
+		gfar_check_rx_parser_mode(priv);
 	}
 
 	gfar_change_mtu(dev, dev->mtu);

+ 2 - 1
drivers/net/gianfar.h

@@ -274,7 +274,7 @@ extern const char gfar_driver_version[];
 #define RCTRL_PROM		0x00000008
 #define RCTRL_EMEN		0x00000002
 #define RCTRL_REQ_PARSER	(RCTRL_VLEX | RCTRL_IPCSEN | \
-				 RCTRL_TUCSEN)
+				 RCTRL_TUCSEN | RCTRL_FILREN)
 #define RCTRL_CHECKSUMMING	(RCTRL_IPCSEN | RCTRL_TUCSEN | \
 				RCTRL_PRSDEP_INIT)
 #define RCTRL_EXTHASH		(RCTRL_GHTX)
@@ -1156,6 +1156,7 @@ extern void gfar_configure_coalescing(struct gfar_private *priv,
 		unsigned long tx_mask, unsigned long rx_mask);
 void gfar_init_sysfs(struct net_device *dev);
 int gfar_set_features(struct net_device *dev, u32 features);
+extern void gfar_check_rx_parser_mode(struct gfar_private *priv);
 
 extern const struct ethtool_ops gfar_ethtool_ops;
 

+ 3 - 3
drivers/net/natsemi.c

@@ -140,7 +140,7 @@ MODULE_LICENSE("GPL");
 module_param(mtu, int, 0);
 module_param(debug, int, 0);
 module_param(rx_copybreak, int, 0);
-module_param(dspcfg_workaround, int, 1);
+module_param(dspcfg_workaround, int, 0);
 module_param_array(options, int, NULL, 0);
 module_param_array(full_duplex, int, NULL, 0);
 MODULE_PARM_DESC(mtu, "DP8381x MTU (all boards)");
@@ -2028,8 +2028,8 @@ static void drain_rx(struct net_device *dev)
 		np->rx_ring[i].cmd_status = 0;
 		np->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
 		if (np->rx_skbuff[i]) {
-			pci_unmap_single(np->pci_dev,
-				np->rx_dma[i], buflen,
+			pci_unmap_single(np->pci_dev, np->rx_dma[i],
+				buflen + NATSEMI_PADDING,
 				PCI_DMA_FROMDEVICE);
 			dev_kfree_skb(np->rx_skbuff[i]);
 		}

+ 2 - 1
drivers/net/pppoe.c

@@ -348,8 +348,9 @@ static int pppoe_device_event(struct notifier_block *this,
 
 	/* Only look at sockets that are using this specific device. */
 	switch (event) {
+	case NETDEV_CHANGEADDR:
 	case NETDEV_CHANGEMTU:
-		/* A change in mtu is a bad thing, requiring
+		/* A change in mtu or address is a bad thing, requiring
 		 * LCP re-negotiation.
 		 */
 

+ 5 - 3
drivers/net/r6040.c

@@ -677,9 +677,11 @@ static irqreturn_t r6040_interrupt(int irq, void *dev_id)
 		if (status & RX_FIFO_FULL)
 			dev->stats.rx_fifo_errors++;
 
-		/* Mask off RX interrupt */
-		misr &= ~RX_INTS;
-		napi_schedule(&lp->napi);
+		if (likely(napi_schedule_prep(&lp->napi))) {
+			/* Mask off RX interrupt */
+			misr &= ~RX_INTS;
+			__napi_schedule(&lp->napi);
+		}
 	}
 
 	/* TX interrupt request */

+ 1 - 1
drivers/net/slip.c

@@ -182,10 +182,10 @@ static int sl_alloc_bufs(struct slip *sl, int mtu)
 #ifdef SL_INCLUDE_CSLIP
 	cbuff = xchg(&sl->cbuff, cbuff);
 	slcomp = xchg(&sl->slcomp, slcomp);
+#endif
 #ifdef CONFIG_SLIP_MODE_SLIP6
 	sl->xdata    = 0;
 	sl->xbits    = 0;
-#endif
 #endif
 	spin_unlock_bh(&sl->lock);
 	err = 0;

+ 0 - 4
drivers/net/tulip/dmfe.c

@@ -879,7 +879,6 @@ static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db)
 	txptr = db->tx_remove_ptr;
 	while(db->tx_packet_cnt) {
 		tdes0 = le32_to_cpu(txptr->tdes0);
-		pr_debug("tdes0=%x\n", tdes0);
 		if (tdes0 & 0x80000000)
 			break;
 
@@ -889,7 +888,6 @@ static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db)
 
 		/* Transmit statistic counter */
 		if ( tdes0 != 0x7fffffff ) {
-			pr_debug("tdes0=%x\n", tdes0);
 			dev->stats.collisions += (tdes0 >> 3) & 0xf;
 			dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
 			if (tdes0 & TDES0_ERR_MASK) {
@@ -986,7 +984,6 @@ static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db)
 			/* error summary bit check */
 			if (rdes0 & 0x8000) {
 				/* This is a error packet */
-				pr_debug("rdes0: %x\n", rdes0);
 				dev->stats.rx_errors++;
 				if (rdes0 & 1)
 					dev->stats.rx_fifo_errors++;
@@ -1638,7 +1635,6 @@ static u8 dmfe_sense_speed(struct dmfe_board_info * db)
 		else 				/* DM9102/DM9102A */
 			phy_mode = phy_read(db->ioaddr,
 				    db->phy_addr, 17, db->chip_id) & 0xf000;
-		pr_debug("Phy_mode %x\n", phy_mode);
 		switch (phy_mode) {
 		case 0x1000: db->op_mode = DMFE_10MHF; break;
 		case 0x2000: db->op_mode = DMFE_10MFD; break;

+ 4 - 3
drivers/net/usb/hso.c

@@ -2421,10 +2421,8 @@ static void hso_free_net_device(struct hso_device *hso_dev)
 
 	remove_net_device(hso_net->parent);
 
-	if (hso_net->net) {
+	if (hso_net->net)
 		unregister_netdev(hso_net->net);
-		free_netdev(hso_net->net);
-	}
 
 	/* start freeing */
 	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
@@ -2436,6 +2434,9 @@ static void hso_free_net_device(struct hso_device *hso_dev)
 	kfree(hso_net->mux_bulk_tx_buf);
 	hso_net->mux_bulk_tx_buf = NULL;
 
+	if (hso_net->net)
+		free_netdev(hso_net->net);
+
 	kfree(hso_dev);
 }
 

+ 5 - 2
drivers/net/wireless/ath/ath5k/pci.c

@@ -297,7 +297,9 @@ ath5k_pci_remove(struct pci_dev *pdev)
 #ifdef CONFIG_PM_SLEEP
 static int ath5k_pci_suspend(struct device *dev)
 {
-	struct ath5k_softc *sc = pci_get_drvdata(to_pci_dev(dev));
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+	struct ath5k_softc *sc = hw->priv;
 
 	ath5k_led_off(sc);
 	return 0;
@@ -306,7 +308,8 @@ static int ath5k_pci_suspend(struct device *dev)
 static int ath5k_pci_resume(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
-	struct ath5k_softc *sc = pci_get_drvdata(pdev);
+	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+	struct ath5k_softc *sc = hw->priv;
 
 	/*
 	 * Suspend/Resume resets the PCI configuration space, so we have to

+ 6 - 3
drivers/net/wireless/ath/ath5k/sysfs.c

@@ -10,7 +10,8 @@ static ssize_t ath5k_attr_show_##name(struct device *dev,		\
 			struct device_attribute *attr,			\
 			char *buf)					\
 {									\
-	struct ath5k_softc *sc = dev_get_drvdata(dev);			\
+	struct ieee80211_hw *hw = dev_get_drvdata(dev);			\
+	struct ath5k_softc *sc = hw->priv;				\
 	return snprintf(buf, PAGE_SIZE, "%d\n", get); 			\
 }									\
 									\
@@ -18,7 +19,8 @@ static ssize_t ath5k_attr_store_##name(struct device *dev,		\
 			struct device_attribute *attr,			\
 			const char *buf, size_t count)			\
 {									\
-	struct ath5k_softc *sc = dev_get_drvdata(dev);			\
+	struct ieee80211_hw *hw = dev_get_drvdata(dev);			\
+	struct ath5k_softc *sc = hw->priv;				\
 	int val;							\
 									\
 	val = (int)simple_strtoul(buf, NULL, 10);			\
@@ -33,7 +35,8 @@ static ssize_t ath5k_attr_show_##name(struct device *dev,		\
 			struct device_attribute *attr,			\
 			char *buf)					\
 {									\
-	struct ath5k_softc *sc = dev_get_drvdata(dev);			\
+	struct ieee80211_hw *hw = dev_get_drvdata(dev);			\
+	struct ath5k_softc *sc = hw->priv;				\
 	return snprintf(buf, PAGE_SIZE, "%d\n", get); 			\
 }									\
 static DEVICE_ATTR(name, S_IRUGO, ath5k_attr_show_##name, NULL)

+ 2 - 1
drivers/net/wireless/ath/ath9k/xmit.c

@@ -671,7 +671,8 @@ static int ath_compute_num_delims(struct ath_softc *sc, struct ath_atx_tid *tid,
 	 * TODO - this could be improved to be dependent on the rate.
 	 *      The hardware can keep up at lower rates, but not higher rates
 	 */
-	if (fi->keyix != ATH9K_TXKEYIX_INVALID)
+	if ((fi->keyix != ATH9K_TXKEYIX_INVALID) &&
+	    !(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA))
 		ndelim += ATH_AGGR_ENCRYPTDELIM;
 
 	/*

+ 2 - 0
drivers/net/wireless/ath/carl9170/usb.c

@@ -112,6 +112,8 @@ static struct usb_device_id carl9170_usb_ids[] = {
 	{ USB_DEVICE(0x04bb, 0x093f) },
 	/* NEC WL300NU-G */
 	{ USB_DEVICE(0x0409, 0x0249) },
+	/* NEC WL300NU-AG */
+	{ USB_DEVICE(0x0409, 0x02b4) },
 	/* AVM FRITZ!WLAN USB Stick N */
 	{ USB_DEVICE(0x057c, 0x8401) },
 	/* AVM FRITZ!WLAN USB Stick N 2.4 */

+ 1 - 0
drivers/net/wireless/rtlwifi/rtl8192cu/sw.c

@@ -298,6 +298,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
 	{RTL_USB_DEVICE(0x06f8, 0xe033, rtl92cu_hal_cfg)}, /*Hercules - Edimax*/
 	{RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/
 	{RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/
+	{RTL_USB_DEVICE(0x0846, 0x9041, rtl92cu_hal_cfg)}, /*NetGear WNA1000M*/
 	{RTL_USB_DEVICE(0x0Df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
 	{RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/
 	/* HP - Lite-On ,8188CUS Slim Combo */

+ 1 - 1
drivers/pci/hotplug/acpiphp_glue.c

@@ -110,7 +110,7 @@ static int post_dock_fixups(struct notifier_block *nb, unsigned long val,
 }
 
 
-static struct acpi_dock_ops acpiphp_dock_ops = {
+static const struct acpi_dock_ops acpiphp_dock_ops = {
 	.handler = handle_hotplug_event_func,
 };
 

+ 9 - 9
drivers/ssb/driver_pcicore.c

@@ -516,8 +516,17 @@ static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc)
 
 static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
 {
+	ssb_pcicore_fix_sprom_core_index(pc);
+
 	/* Disable PCI interrupts. */
 	ssb_write32(pc->dev, SSB_INTVEC, 0);
+
+	/* Additional PCIe always once-executed workarounds */
+	if (pc->dev->id.coreid == SSB_DEV_PCIE) {
+		ssb_pcicore_serdes_workaround(pc);
+		/* TODO: ASPM */
+		/* TODO: Clock Request Update */
+	}
 }
 
 void ssb_pcicore_init(struct ssb_pcicore *pc)
@@ -529,8 +538,6 @@ void ssb_pcicore_init(struct ssb_pcicore *pc)
 	if (!ssb_device_is_enabled(dev))
 		ssb_device_enable(dev, 0);
 
-	ssb_pcicore_fix_sprom_core_index(pc);
-
 #ifdef CONFIG_SSB_PCICORE_HOSTMODE
 	pc->hostmode = pcicore_is_in_hostmode(pc);
 	if (pc->hostmode)
@@ -538,13 +545,6 @@ void ssb_pcicore_init(struct ssb_pcicore *pc)
 #endif /* CONFIG_SSB_PCICORE_HOSTMODE */
 	if (!pc->hostmode)
 		ssb_pcicore_init_clientmode(pc);
-
-	/* Additional PCIe always once-executed workarounds */
-	if (dev->id.coreid == SSB_DEV_PCIE) {
-		ssb_pcicore_serdes_workaround(pc);
-		/* TODO: ASPM */
-		/* TODO: Clock Request Update */
-	}
 }
 
 static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address)

+ 2 - 6
drivers/thermal/Kconfig

@@ -14,11 +14,7 @@ menuconfig THERMAL
 	  If you want this support, you should say Y or M here.
 
 config THERMAL_HWMON
-	bool "Hardware monitoring support"
+	bool
 	depends on THERMAL
 	depends on HWMON=y || HWMON=THERMAL
-	help
-	  The generic thermal sysfs driver's hardware monitoring support
-	  requires a 2.10.7/3.0.2 or later lm-sensors userspace.
-
-	  Say Y if your user-space is new enough.
+	default y

+ 111 - 31
drivers/thermal/thermal_sys.c

@@ -420,6 +420,29 @@ thermal_cooling_device_trip_point_show(struct device *dev,
 
 /* hwmon sys I/F */
 #include <linux/hwmon.h>
+
+/* thermal zone devices with the same type share one hwmon device */
+struct thermal_hwmon_device {
+	char type[THERMAL_NAME_LENGTH];
+	struct device *device;
+	int count;
+	struct list_head tz_list;
+	struct list_head node;
+};
+
+struct thermal_hwmon_attr {
+	struct device_attribute attr;
+	char name[16];
+};
+
+/* one temperature input for each thermal zone */
+struct thermal_hwmon_temp {
+	struct list_head hwmon_node;
+	struct thermal_zone_device *tz;
+	struct thermal_hwmon_attr temp_input;	/* hwmon sys attr */
+	struct thermal_hwmon_attr temp_crit;	/* hwmon sys attr */
+};
+
 static LIST_HEAD(thermal_hwmon_list);
 
 static ssize_t
@@ -437,9 +460,10 @@ temp_input_show(struct device *dev, struct device_attribute *attr, char *buf)
 	int ret;
 	struct thermal_hwmon_attr *hwmon_attr
 			= container_of(attr, struct thermal_hwmon_attr, attr);
-	struct thermal_zone_device *tz
-			= container_of(hwmon_attr, struct thermal_zone_device,
+	struct thermal_hwmon_temp *temp
+			= container_of(hwmon_attr, struct thermal_hwmon_temp,
 				       temp_input);
+	struct thermal_zone_device *tz = temp->tz;
 
 	ret = tz->ops->get_temp(tz, &temperature);
 
@@ -455,9 +479,10 @@ temp_crit_show(struct device *dev, struct device_attribute *attr,
 {
 	struct thermal_hwmon_attr *hwmon_attr
 			= container_of(attr, struct thermal_hwmon_attr, attr);
-	struct thermal_zone_device *tz
-			= container_of(hwmon_attr, struct thermal_zone_device,
+	struct thermal_hwmon_temp *temp
+			= container_of(hwmon_attr, struct thermal_hwmon_temp,
 				       temp_crit);
+	struct thermal_zone_device *tz = temp->tz;
 	long temperature;
 	int ret;
 
@@ -469,22 +494,54 @@ temp_crit_show(struct device *dev, struct device_attribute *attr,
 }
 
 
-static int
-thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
+static struct thermal_hwmon_device *
+thermal_hwmon_lookup_by_type(const struct thermal_zone_device *tz)
 {
 	struct thermal_hwmon_device *hwmon;
-	int new_hwmon_device = 1;
-	int result;
 
 	mutex_lock(&thermal_list_lock);
 	list_for_each_entry(hwmon, &thermal_hwmon_list, node)
 		if (!strcmp(hwmon->type, tz->type)) {
-			new_hwmon_device = 0;
 			mutex_unlock(&thermal_list_lock);
-			goto register_sys_interface;
+			return hwmon;
+		}
+	mutex_unlock(&thermal_list_lock);
+
+	return NULL;
+}
+
+/* Find the temperature input matching a given thermal zone */
+static struct thermal_hwmon_temp *
+thermal_hwmon_lookup_temp(const struct thermal_hwmon_device *hwmon,
+			  const struct thermal_zone_device *tz)
+{
+	struct thermal_hwmon_temp *temp;
+
+	mutex_lock(&thermal_list_lock);
+	list_for_each_entry(temp, &hwmon->tz_list, hwmon_node)
+		if (temp->tz == tz) {
+			mutex_unlock(&thermal_list_lock);
+			return temp;
 		}
 	mutex_unlock(&thermal_list_lock);
 
+	return NULL;
+}
+
+static int
+thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
+{
+	struct thermal_hwmon_device *hwmon;
+	struct thermal_hwmon_temp *temp;
+	int new_hwmon_device = 1;
+	int result;
+
+	hwmon = thermal_hwmon_lookup_by_type(tz);
+	if (hwmon) {
+		new_hwmon_device = 0;
+		goto register_sys_interface;
+	}
+
 	hwmon = kzalloc(sizeof(struct thermal_hwmon_device), GFP_KERNEL);
 	if (!hwmon)
 		return -ENOMEM;
@@ -502,30 +559,36 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
 		goto free_mem;
 
  register_sys_interface:
-	tz->hwmon = hwmon;
+	temp = kzalloc(sizeof(struct thermal_hwmon_temp), GFP_KERNEL);
+	if (!temp) {
+		result = -ENOMEM;
+		goto unregister_name;
+	}
+
+	temp->tz = tz;
 	hwmon->count++;
 
-	snprintf(tz->temp_input.name, THERMAL_NAME_LENGTH,
+	snprintf(temp->temp_input.name, THERMAL_NAME_LENGTH,
 		 "temp%d_input", hwmon->count);
-	tz->temp_input.attr.attr.name = tz->temp_input.name;
-	tz->temp_input.attr.attr.mode = 0444;
-	tz->temp_input.attr.show = temp_input_show;
-	sysfs_attr_init(&tz->temp_input.attr.attr);
-	result = device_create_file(hwmon->device, &tz->temp_input.attr);
+	temp->temp_input.attr.attr.name = temp->temp_input.name;
+	temp->temp_input.attr.attr.mode = 0444;
+	temp->temp_input.attr.show = temp_input_show;
+	sysfs_attr_init(&temp->temp_input.attr.attr);
+	result = device_create_file(hwmon->device, &temp->temp_input.attr);
 	if (result)
-		goto unregister_name;
+		goto free_temp_mem;
 
 	if (tz->ops->get_crit_temp) {
 		unsigned long temperature;
 		if (!tz->ops->get_crit_temp(tz, &temperature)) {
-			snprintf(tz->temp_crit.name, THERMAL_NAME_LENGTH,
+			snprintf(temp->temp_crit.name, THERMAL_NAME_LENGTH,
 				"temp%d_crit", hwmon->count);
-			tz->temp_crit.attr.attr.name = tz->temp_crit.name;
-			tz->temp_crit.attr.attr.mode = 0444;
-			tz->temp_crit.attr.show = temp_crit_show;
-			sysfs_attr_init(&tz->temp_crit.attr.attr);
+			temp->temp_crit.attr.attr.name = temp->temp_crit.name;
+			temp->temp_crit.attr.attr.mode = 0444;
+			temp->temp_crit.attr.show = temp_crit_show;
+			sysfs_attr_init(&temp->temp_crit.attr.attr);
 			result = device_create_file(hwmon->device,
-						    &tz->temp_crit.attr);
+						    &temp->temp_crit.attr);
 			if (result)
 				goto unregister_input;
 		}
@@ -534,13 +597,15 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
 	mutex_lock(&thermal_list_lock);
 	if (new_hwmon_device)
 		list_add_tail(&hwmon->node, &thermal_hwmon_list);
-	list_add_tail(&tz->hwmon_node, &hwmon->tz_list);
+	list_add_tail(&temp->hwmon_node, &hwmon->tz_list);
 	mutex_unlock(&thermal_list_lock);
 
 	return 0;
 
  unregister_input:
-	device_remove_file(hwmon->device, &tz->temp_input.attr);
+	device_remove_file(hwmon->device, &temp->temp_input.attr);
+ free_temp_mem:
+	kfree(temp);
  unregister_name:
 	if (new_hwmon_device) {
 		device_remove_file(hwmon->device, &dev_attr_name);
@@ -556,15 +621,30 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
 static void
 thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz)
 {
-	struct thermal_hwmon_device *hwmon = tz->hwmon;
+	struct thermal_hwmon_device *hwmon;
+	struct thermal_hwmon_temp *temp;
+
+	hwmon = thermal_hwmon_lookup_by_type(tz);
+	if (unlikely(!hwmon)) {
+		/* Should never happen... */
+		dev_dbg(&tz->device, "hwmon device lookup failed!\n");
+		return;
+	}
+
+	temp = thermal_hwmon_lookup_temp(hwmon, tz);
+	if (unlikely(!temp)) {
+		/* Should never happen... */
+		dev_dbg(&tz->device, "temperature input lookup failed!\n");
+		return;
+	}
 
-	tz->hwmon = NULL;
-	device_remove_file(hwmon->device, &tz->temp_input.attr);
+	device_remove_file(hwmon->device, &temp->temp_input.attr);
 	if (tz->ops->get_crit_temp)
-		device_remove_file(hwmon->device, &tz->temp_crit.attr);
+		device_remove_file(hwmon->device, &temp->temp_crit.attr);
 
 	mutex_lock(&thermal_list_lock);
-	list_del(&tz->hwmon_node);
+	list_del(&temp->hwmon_node);
+	kfree(temp);
 	if (!list_empty(&hwmon->tz_list)) {
 		mutex_unlock(&thermal_list_lock);
 		return;

+ 1 - 2
drivers/watchdog/Kconfig

@@ -599,8 +599,7 @@ config IT87_WDT
 
 config HP_WATCHDOG
 	tristate "HP ProLiant iLO2+ Hardware Watchdog Timer"
-	depends on X86
-	default m
+	depends on X86 && PCI
 	help
 	  A software monitoring watchdog and NMI sourcing driver. This driver
 	  will detect lockups and provide a stack trace. This is a driver that

+ 16 - 3
fs/ceph/mds_client.c

@@ -1438,12 +1438,15 @@ char *ceph_mdsc_build_path(struct dentry *dentry, int *plen, u64 *base,
 	struct dentry *temp;
 	char *path;
 	int len, pos;
+	unsigned seq;
 
 	if (dentry == NULL)
 		return ERR_PTR(-EINVAL);
 
 retry:
 	len = 0;
+	seq = read_seqbegin(&rename_lock);
+	rcu_read_lock();
 	for (temp = dentry; !IS_ROOT(temp);) {
 		struct inode *inode = temp->d_inode;
 		if (inode && ceph_snap(inode) == CEPH_SNAPDIR)
@@ -1455,10 +1458,12 @@ retry:
 			len += 1 + temp->d_name.len;
 		temp = temp->d_parent;
 		if (temp == NULL) {
+			rcu_read_unlock();
 			pr_err("build_path corrupt dentry %p\n", dentry);
 			return ERR_PTR(-EINVAL);
 		}
 	}
+	rcu_read_unlock();
 	if (len)
 		len--;  /* no leading '/' */
 
@@ -1467,9 +1472,12 @@ retry:
 		return ERR_PTR(-ENOMEM);
 	pos = len;
 	path[pos] = 0;	/* trailing null */
+	rcu_read_lock();
 	for (temp = dentry; !IS_ROOT(temp) && pos != 0; ) {
-		struct inode *inode = temp->d_inode;
+		struct inode *inode;
 
+		spin_lock(&temp->d_lock);
+		inode = temp->d_inode;
 		if (inode && ceph_snap(inode) == CEPH_SNAPDIR) {
 			dout("build_path path+%d: %p SNAPDIR\n",
 			     pos, temp);
@@ -1478,21 +1486,26 @@ retry:
 			break;
 		} else {
 			pos -= temp->d_name.len;
-			if (pos < 0)
+			if (pos < 0) {
+				spin_unlock(&temp->d_lock);
 				break;
+			}
 			strncpy(path + pos, temp->d_name.name,
 				temp->d_name.len);
 		}
+		spin_unlock(&temp->d_lock);
 		if (pos)
 			path[--pos] = '/';
 		temp = temp->d_parent;
 		if (temp == NULL) {
+			rcu_read_unlock();
 			pr_err("build_path corrupt dentry\n");
 			kfree(path);
 			return ERR_PTR(-EINVAL);
 		}
 	}
-	if (pos != 0) {
+	rcu_read_unlock();
+	if (pos != 0 || read_seqretry(&rename_lock, seq)) {
 		pr_err("build_path did not end path lookup where "
 		       "expected, namelen is %d, pos is %d\n", len, pos);
 		/* presumably this is only possible if racing with a

+ 29 - 71
fs/cifs/cifsfs.c

@@ -35,6 +35,7 @@
 #include <linux/delay.h>
 #include <linux/kthread.h>
 #include <linux/freezer.h>
+#include <linux/namei.h>
 #include <net/ipv6.h>
 #include "cifsfs.h"
 #include "cifspdu.h"
@@ -542,14 +543,12 @@ static const struct super_operations cifs_super_ops = {
 static struct dentry *
 cifs_get_root(struct smb_vol *vol, struct super_block *sb)
 {
-	int xid, rc;
-	struct inode *inode;
-	struct qstr name;
-	struct dentry *dparent = NULL, *dchild = NULL, *alias;
+	struct dentry *dentry;
 	struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
-	unsigned int i, full_len, len;
-	char *full_path = NULL, *pstart;
+	char *full_path = NULL;
+	char *s, *p;
 	char sep;
+	int xid;
 
 	full_path = cifs_build_path_to_root(vol, cifs_sb,
 					    cifs_sb_master_tcon(cifs_sb));
@@ -560,73 +559,32 @@ cifs_get_root(struct smb_vol *vol, struct super_block *sb)
 
 	xid = GetXid();
 	sep = CIFS_DIR_SEP(cifs_sb);
-	dparent = dget(sb->s_root);
-	full_len = strlen(full_path);
-	full_path[full_len] = sep;
-	pstart = full_path + 1;
-
-	for (i = 1, len = 0; i <= full_len; i++) {
-		if (full_path[i] != sep || !len) {
-			len++;
-			continue;
-		}
-
-		full_path[i] = 0;
-		cFYI(1, "get dentry for %s", pstart);
-
-		name.name = pstart;
-		name.len = len;
-		name.hash = full_name_hash(pstart, len);
-		dchild = d_lookup(dparent, &name);
-		if (dchild == NULL) {
-			cFYI(1, "not exists");
-			dchild = d_alloc(dparent, &name);
-			if (dchild == NULL) {
-				dput(dparent);
-				dparent = ERR_PTR(-ENOMEM);
-				goto out;
-			}
-		}
-
-		cFYI(1, "get inode");
-		if (dchild->d_inode == NULL) {
-			cFYI(1, "not exists");
-			inode = NULL;
-			if (cifs_sb_master_tcon(CIFS_SB(sb))->unix_ext)
-				rc = cifs_get_inode_info_unix(&inode, full_path,
-							      sb, xid);
-			else
-				rc = cifs_get_inode_info(&inode, full_path,
-							 NULL, sb, xid, NULL);
-			if (rc) {
-				dput(dchild);
-				dput(dparent);
-				dparent = ERR_PTR(rc);
-				goto out;
-			}
-			alias = d_materialise_unique(dchild, inode);
-			if (alias != NULL) {
-				dput(dchild);
-				if (IS_ERR(alias)) {
-					dput(dparent);
-					dparent = ERR_PTR(-EINVAL); /* XXX */
-					goto out;
-				}
-				dchild = alias;
-			}
-		}
-		cFYI(1, "parent %p, child %p", dparent, dchild);
-
-		dput(dparent);
-		dparent = dchild;
-		len = 0;
-		pstart = full_path + i + 1;
-		full_path[i] = sep;
-	}
-out:
+	dentry = dget(sb->s_root);
+	p = s = full_path;
+
+	do {
+		struct inode *dir = dentry->d_inode;
+		struct dentry *child;
+
+		/* skip separators */
+		while (*s == sep)
+			s++;
+		if (!*s)
+			break;
+		p = s++;
+		/* next separator */
+		while (*s && *s != sep)
+			s++;
+
+		mutex_lock(&dir->i_mutex);
+		child = lookup_one_len(p, dentry, s - p);
+		mutex_unlock(&dir->i_mutex);
+		dput(dentry);
+		dentry = child;
+	} while (!IS_ERR(dentry));
 	_FreeXid(xid);
 	kfree(full_path);
-	return dparent;
+	return dentry;
 }
 
 static int cifs_set_super(struct super_block *sb, void *data)

+ 1 - 1
fs/cifs/cifsfs.h

@@ -129,5 +129,5 @@ extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
 extern const struct export_operations cifs_export_ops;
 #endif /* CIFS_NFSD_EXPORT */
 
-#define CIFS_VERSION   "1.73"
+#define CIFS_VERSION   "1.74"
 #endif				/* _CIFSFS_H */

+ 1 - 1
fs/cifs/connect.c

@@ -3485,7 +3485,7 @@ cifs_construct_tcon(struct cifs_sb_info *cifs_sb, uid_t fsuid)
 		goto out;
 	}
 
-	snprintf(username, MAX_USERNAME_SIZE, "krb50x%x", fsuid);
+	snprintf(username, sizeof(username), "krb50x%x", fsuid);
 	vol_info->username = username;
 	vol_info->local_nls = cifs_sb->local_nls;
 	vol_info->linux_uid = fsuid;

+ 12 - 1
fs/cifs/dir.c

@@ -55,6 +55,7 @@ build_path_from_dentry(struct dentry *direntry)
 	char dirsep;
 	struct cifs_sb_info *cifs_sb = CIFS_SB(direntry->d_sb);
 	struct cifs_tcon *tcon = cifs_sb_master_tcon(cifs_sb);
+	unsigned seq;
 
 	if (direntry == NULL)
 		return NULL;  /* not much we can do if dentry is freed and
@@ -68,22 +69,29 @@ build_path_from_dentry(struct dentry *direntry)
 		dfsplen = 0;
 cifs_bp_rename_retry:
 	namelen = dfsplen;
+	seq = read_seqbegin(&rename_lock);
+	rcu_read_lock();
 	for (temp = direntry; !IS_ROOT(temp);) {
 		namelen += (1 + temp->d_name.len);
 		temp = temp->d_parent;
 		if (temp == NULL) {
 			cERROR(1, "corrupt dentry");
+			rcu_read_unlock();
 			return NULL;
 		}
 	}
+	rcu_read_unlock();
 
 	full_path = kmalloc(namelen+1, GFP_KERNEL);
 	if (full_path == NULL)
 		return full_path;
 	full_path[namelen] = 0;	/* trailing null */
+	rcu_read_lock();
 	for (temp = direntry; !IS_ROOT(temp);) {
+		spin_lock(&temp->d_lock);
 		namelen -= 1 + temp->d_name.len;
 		if (namelen < 0) {
+			spin_unlock(&temp->d_lock);
 			break;
 		} else {
 			full_path[namelen] = dirsep;
@@ -91,14 +99,17 @@ cifs_bp_rename_retry:
 				temp->d_name.len);
 			cFYI(0, "name: %s", full_path + namelen);
 		}
+		spin_unlock(&temp->d_lock);
 		temp = temp->d_parent;
 		if (temp == NULL) {
 			cERROR(1, "corrupt dentry");
+			rcu_read_unlock();
 			kfree(full_path);
 			return NULL;
 		}
 	}
-	if (namelen != dfsplen) {
+	rcu_read_unlock();
+	if (namelen != dfsplen || read_seqretry(&rename_lock, seq)) {
 		cERROR(1, "did not end path lookup where expected namelen is %d",
 			namelen);
 		/* presumably this is only possible if racing with a rename

+ 1 - 1
fs/cifs/file.c

@@ -1737,7 +1737,7 @@ cifs_iovec_read(struct file *file, const struct iovec *iov,
 			io_parms.pid = pid;
 			io_parms.tcon = pTcon;
 			io_parms.offset = *poffset;
-			io_parms.length = len;
+			io_parms.length = cur_len;
 			rc = CIFSSMBRead(xid, &io_parms, &bytes_read,
 					 &read_data, &buf_type);
 			pSMBr = (struct smb_com_read_rsp *)read_data;

+ 5 - 5
fs/cifs/sess.c

@@ -428,8 +428,7 @@ static void build_ntlmssp_negotiate_blob(unsigned char *pbuffer,
 			(SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) {
 		flags |= NTLMSSP_NEGOTIATE_SIGN;
 		if (!ses->server->session_estab)
-			flags |= NTLMSSP_NEGOTIATE_KEY_XCH |
-				NTLMSSP_NEGOTIATE_EXTENDED_SEC;
+			flags |= NTLMSSP_NEGOTIATE_KEY_XCH;
 	}
 
 	sec_blob->NegotiateFlags = cpu_to_le32(flags);
@@ -465,10 +464,11 @@ static int build_ntlmssp_auth_blob(unsigned char *pbuffer,
 		NTLMSSP_NEGOTIATE_128 | NTLMSSP_NEGOTIATE_UNICODE |
 		NTLMSSP_NEGOTIATE_NTLM | NTLMSSP_NEGOTIATE_EXTENDED_SEC;
 	if (ses->server->sec_mode &
-	   (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+	   (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) {
 		flags |= NTLMSSP_NEGOTIATE_SIGN;
-	if (ses->server->sec_mode & SECMODE_SIGN_REQUIRED)
-		flags |= NTLMSSP_NEGOTIATE_ALWAYS_SIGN;
+		if (!ses->server->session_estab)
+			flags |= NTLMSSP_NEGOTIATE_KEY_XCH;
+	}
 
 	tmp = pbuffer + sizeof(AUTHENTICATE_MESSAGE);
 	sec_blob->NegotiateFlags = cpu_to_le32(flags);

+ 12 - 10
fs/cramfs/inode.c

@@ -37,7 +37,7 @@ static DEFINE_MUTEX(read_mutex);
 /* These macros may change in future, to provide better st_ino semantics. */
 #define OFFSET(x)	((x)->i_ino)
 
-static unsigned long cramino(struct cramfs_inode *cino, unsigned int offset)
+static unsigned long cramino(const struct cramfs_inode *cino, unsigned int offset)
 {
 	if (!cino->offset)
 		return offset + 1;
@@ -61,7 +61,7 @@ static unsigned long cramino(struct cramfs_inode *cino, unsigned int offset)
 }
 
 static struct inode *get_cramfs_inode(struct super_block *sb,
-	struct cramfs_inode *cramfs_inode, unsigned int offset)
+	const struct cramfs_inode *cramfs_inode, unsigned int offset)
 {
 	struct inode *inode;
 	static struct timespec zerotime;
@@ -317,7 +317,7 @@ static int cramfs_fill_super(struct super_block *sb, void *data, int silent)
 	/* Set it all up.. */
 	sb->s_op = &cramfs_ops;
 	root = get_cramfs_inode(sb, &super.root, 0);
-	if (!root)
+	if (IS_ERR(root))
 		goto out;
 	sb->s_root = d_alloc_root(root);
 	if (!sb->s_root) {
@@ -423,6 +423,7 @@ static int cramfs_readdir(struct file *filp, void *dirent, filldir_t filldir)
 static struct dentry * cramfs_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
 {
 	unsigned int offset = 0;
+	struct inode *inode = NULL;
 	int sorted;
 
 	mutex_lock(&read_mutex);
@@ -449,8 +450,8 @@ static struct dentry * cramfs_lookup(struct inode *dir, struct dentry *dentry, s
 
 		for (;;) {
 			if (!namelen) {
-				mutex_unlock(&read_mutex);
-				return ERR_PTR(-EIO);
+				inode = ERR_PTR(-EIO);
+				goto out;
 			}
 			if (name[namelen-1])
 				break;
@@ -462,17 +463,18 @@ static struct dentry * cramfs_lookup(struct inode *dir, struct dentry *dentry, s
 		if (retval > 0)
 			continue;
 		if (!retval) {
-			struct cramfs_inode entry = *de;
-			mutex_unlock(&read_mutex);
-			d_add(dentry, get_cramfs_inode(dir->i_sb, &entry, dir_off));
-			return NULL;
+			inode = get_cramfs_inode(dir->i_sb, de, dir_off);
+			break;
 		}
 		/* else (retval < 0) */
 		if (sorted)
 			break;
 	}
+out:
 	mutex_unlock(&read_mutex);
-	d_add(dentry, NULL);
+	if (IS_ERR(inode))
+		return ERR_CAST(inode);
+	d_add(dentry, inode);
 	return NULL;
 }
 

+ 34 - 19
fs/dcache.c

@@ -1813,8 +1813,6 @@ seqretry:
 		tname = dentry->d_name.name;
 		i = dentry->d_inode;
 		prefetch(tname);
-		if (i)
-			prefetch(i);
 		/*
 		 * This seqcount check is required to ensure name and
 		 * len are loaded atomically, so as not to walk off the
@@ -2213,14 +2211,15 @@ static void dentry_unlock_parents_for_move(struct dentry *dentry,
  * The hash value has to match the hash queue that the dentry is on..
  */
 /*
- * d_move - move a dentry
+ * __d_move - move a dentry
  * @dentry: entry to move
  * @target: new dentry
  *
  * Update the dcache to reflect the move of a file name. Negative
- * dcache entries should not be moved in this way.
+ * dcache entries should not be moved in this way.  Caller hold
+ * rename_lock.
  */
-void d_move(struct dentry * dentry, struct dentry * target)
+static void __d_move(struct dentry * dentry, struct dentry * target)
 {
 	if (!dentry->d_inode)
 		printk(KERN_WARNING "VFS: moving negative dcache entry\n");
@@ -2228,8 +2227,6 @@ void d_move(struct dentry * dentry, struct dentry * target)
 	BUG_ON(d_ancestor(dentry, target));
 	BUG_ON(d_ancestor(target, dentry));
 
-	write_seqlock(&rename_lock);
-
 	dentry_lock_for_move(dentry, target);
 
 	write_seqcount_begin(&dentry->d_seq);
@@ -2275,6 +2272,20 @@ void d_move(struct dentry * dentry, struct dentry * target)
 	spin_unlock(&target->d_lock);
 	fsnotify_d_move(dentry);
 	spin_unlock(&dentry->d_lock);
+}
+
+/*
+ * d_move - move a dentry
+ * @dentry: entry to move
+ * @target: new dentry
+ *
+ * Update the dcache to reflect the move of a file name. Negative
+ * dcache entries should not be moved in this way.
+ */
+void d_move(struct dentry *dentry, struct dentry *target)
+{
+	write_seqlock(&rename_lock);
+	__d_move(dentry, target);
 	write_sequnlock(&rename_lock);
 }
 EXPORT_SYMBOL(d_move);
@@ -2302,7 +2313,7 @@ struct dentry *d_ancestor(struct dentry *p1, struct dentry *p2)
  * This helper attempts to cope with remotely renamed directories
  *
  * It assumes that the caller is already holding
- * dentry->d_parent->d_inode->i_mutex and the inode->i_lock
+ * dentry->d_parent->d_inode->i_mutex, inode->i_lock and rename_lock
  *
  * Note: If ever the locking in lock_rename() changes, then please
  * remember to update this too...
@@ -2317,11 +2328,6 @@ static struct dentry *__d_unalias(struct inode *inode,
 	if (alias->d_parent == dentry->d_parent)
 		goto out_unalias;
 
-	/* Check for loops */
-	ret = ERR_PTR(-ELOOP);
-	if (d_ancestor(alias, dentry))
-		goto out_err;
-
 	/* See lock_rename() */
 	ret = ERR_PTR(-EBUSY);
 	if (!mutex_trylock(&dentry->d_sb->s_vfs_rename_mutex))
@@ -2331,7 +2337,7 @@ static struct dentry *__d_unalias(struct inode *inode,
 		goto out_err;
 	m2 = &alias->d_parent->d_inode->i_mutex;
 out_unalias:
-	d_move(alias, dentry);
+	__d_move(alias, dentry);
 	ret = alias;
 out_err:
 	spin_unlock(&inode->i_lock);
@@ -2416,15 +2422,24 @@ struct dentry *d_materialise_unique(struct dentry *dentry, struct inode *inode)
 		alias = __d_find_alias(inode, 0);
 		if (alias) {
 			actual = alias;
-			/* Is this an anonymous mountpoint that we could splice
-			 * into our tree? */
-			if (IS_ROOT(alias)) {
+			write_seqlock(&rename_lock);
+
+			if (d_ancestor(alias, dentry)) {
+				/* Check for loops */
+				actual = ERR_PTR(-ELOOP);
+			} else if (IS_ROOT(alias)) {
+				/* Is this an anonymous mountpoint that we
+				 * could splice into our tree? */
 				__d_materialise_dentry(dentry, alias);
+				write_sequnlock(&rename_lock);
 				__d_drop(alias);
 				goto found;
+			} else {
+				/* Nope, but we must(!) avoid directory
+				 * aliasing */
+				actual = __d_unalias(inode, dentry, alias);
 			}
-			/* Nope, but we must(!) avoid directory aliasing */
-			actual = __d_unalias(inode, dentry, alias);
+			write_sequnlock(&rename_lock);
 			if (IS_ERR(actual))
 				dput(alias);
 			goto out_nolock;

+ 1 - 1
fs/exofs/super.c

@@ -913,7 +913,7 @@ struct dentry *exofs_get_parent(struct dentry *child)
 	unsigned long ino = exofs_parent_ino(child);
 
 	if (!ino)
-		return NULL;
+		return ERR_PTR(-ESTALE);
 
 	return d_obtain_alias(exofs_iget(child->d_inode->i_sb, ino));
 }

+ 5 - 9
fs/fscache/page.c

@@ -976,16 +976,12 @@ void __fscache_uncache_all_inode_pages(struct fscache_cookie *cookie,
 
 	pagevec_init(&pvec, 0);
 	next = 0;
-	while (next <= (loff_t)-1 &&
-	       pagevec_lookup(&pvec, mapping, next, PAGEVEC_SIZE)
-	       ) {
+	do {
+		if (!pagevec_lookup(&pvec, mapping, next, PAGEVEC_SIZE))
+			break;
 		for (i = 0; i < pagevec_count(&pvec); i++) {
 			struct page *page = pvec.pages[i];
-			pgoff_t page_index = page->index;
-
-			ASSERTCMP(page_index, >=, next);
-			next = page_index + 1;
-
+			next = page->index;
 			if (PageFsCache(page)) {
 				__fscache_wait_on_page_write(cookie, page);
 				__fscache_uncache_page(cookie, page);
@@ -993,7 +989,7 @@ void __fscache_uncache_all_inode_pages(struct fscache_cookie *cookie,
 		}
 		pagevec_release(&pvec);
 		cond_resched();
-	}
+	} while (++next);
 
 	_leave("");
 }

+ 3 - 0
fs/gfs2/aops.c

@@ -1069,6 +1069,7 @@ int gfs2_releasepage(struct page *page, gfp_t gfp_mask)
 		return 0;
 
 	gfs2_log_lock(sdp);
+	spin_lock(&sdp->sd_ail_lock);
 	head = bh = page_buffers(page);
 	do {
 		if (atomic_read(&bh->b_count))
@@ -1080,6 +1081,7 @@ int gfs2_releasepage(struct page *page, gfp_t gfp_mask)
 			goto not_possible;
 		bh = bh->b_this_page;
 	} while(bh != head);
+	spin_unlock(&sdp->sd_ail_lock);
 	gfs2_log_unlock(sdp);
 
 	head = bh = page_buffers(page);
@@ -1112,6 +1114,7 @@ not_possible: /* Should never happen */
 	WARN_ON(buffer_dirty(bh));
 	WARN_ON(buffer_pinned(bh));
 cannot_release:
+	spin_unlock(&sdp->sd_ail_lock);
 	gfs2_log_unlock(sdp);
 	return 0;
 }

+ 5 - 3
fs/gfs2/glops.c

@@ -47,10 +47,10 @@ static void __gfs2_ail_flush(struct gfs2_glock *gl)
 				bd_ail_gl_list);
 		bh = bd->bd_bh;
 		gfs2_remove_from_ail(bd);
-		spin_unlock(&sdp->sd_ail_lock);
-
 		bd->bd_bh = NULL;
 		bh->b_private = NULL;
+		spin_unlock(&sdp->sd_ail_lock);
+
 		bd->bd_blkno = bh->b_blocknr;
 		gfs2_log_lock(sdp);
 		gfs2_assert_withdraw(sdp, !buffer_busy(bh));
@@ -221,8 +221,10 @@ static void inode_go_inval(struct gfs2_glock *gl, int flags)
 		}
 	}
 
-	if (ip == GFS2_I(gl->gl_sbd->sd_rindex))
+	if (ip == GFS2_I(gl->gl_sbd->sd_rindex)) {
+		gfs2_log_flush(gl->gl_sbd, NULL);
 		gl->gl_sbd->sd_rindex_uptodate = 0;
+	}
 	if (ip && S_ISREG(ip->i_inode.i_mode))
 		truncate_inode_pages(ip->i_inode.i_mapping, 0);
 }

+ 2 - 0
fs/gfs2/incore.h

@@ -17,6 +17,7 @@
 #include <linux/buffer_head.h>
 #include <linux/rcupdate.h>
 #include <linux/rculist_bl.h>
+#include <linux/completion.h>
 
 #define DIO_WAIT	0x00000010
 #define DIO_METADATA	0x00000020
@@ -546,6 +547,7 @@ struct gfs2_sbd {
 	struct gfs2_glock *sd_trans_gl;
 	wait_queue_head_t sd_glock_wait;
 	atomic_t sd_glock_disposal;
+	struct completion sd_locking_init;
 
 	/* Inode Stuff */
 

+ 1 - 0
fs/gfs2/log.c

@@ -903,6 +903,7 @@ void gfs2_meta_syncfs(struct gfs2_sbd *sdp)
 		if (gfs2_ail1_empty(sdp))
 			break;
 	}
+	gfs2_log_flush(sdp, NULL);
 }
 
 static inline int gfs2_jrnl_flush_reqd(struct gfs2_sbd *sdp)

+ 3 - 0
fs/gfs2/ops_fstype.c

@@ -72,6 +72,7 @@ static struct gfs2_sbd *init_sbd(struct super_block *sb)
 
 	init_waitqueue_head(&sdp->sd_glock_wait);
 	atomic_set(&sdp->sd_glock_disposal, 0);
+	init_completion(&sdp->sd_locking_init);
 	spin_lock_init(&sdp->sd_statfs_spin);
 
 	spin_lock_init(&sdp->sd_rindex_spin);
@@ -1017,11 +1018,13 @@ hostdata_error:
 		fsname++;
 	if (lm->lm_mount == NULL) {
 		fs_info(sdp, "Now mounting FS...\n");
+		complete(&sdp->sd_locking_init);
 		return 0;
 	}
 	ret = lm->lm_mount(sdp, fsname);
 	if (ret == 0)
 		fs_info(sdp, "Joined cluster. Now mounting FS...\n");
+	complete(&sdp->sd_locking_init);
 	return ret;
 }
 

+ 30 - 6
fs/gfs2/super.c

@@ -757,13 +757,17 @@ static int gfs2_write_inode(struct inode *inode, struct writeback_control *wbc)
 	struct timespec atime;
 	struct gfs2_dinode *di;
 	int ret = -EAGAIN;
+	int unlock_required = 0;
 
 	/* Skip timestamp update, if this is from a memalloc */
 	if (current->flags & PF_MEMALLOC)
 		goto do_flush;
-	ret = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
-	if (ret)
-		goto do_flush;
+	if (!gfs2_glock_is_locked_by_me(ip->i_gl)) {
+		ret = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
+		if (ret)
+			goto do_flush;
+		unlock_required = 1;
+	}
 	ret = gfs2_trans_begin(sdp, RES_DINODE, 0);
 	if (ret)
 		goto do_unlock;
@@ -780,7 +784,8 @@ static int gfs2_write_inode(struct inode *inode, struct writeback_control *wbc)
 	}
 	gfs2_trans_end(sdp);
 do_unlock:
-	gfs2_glock_dq_uninit(&gh);
+	if (unlock_required)
+		gfs2_glock_dq_uninit(&gh);
 do_flush:
 	if (wbc->sync_mode == WB_SYNC_ALL)
 		gfs2_log_flush(GFS2_SB(inode), ip->i_gl);
@@ -1427,7 +1432,20 @@ out:
 	return error;
 }
 
-/*
+/**
+ * gfs2_evict_inode - Remove an inode from cache
+ * @inode: The inode to evict
+ *
+ * There are three cases to consider:
+ * 1. i_nlink == 0, we are final opener (and must deallocate)
+ * 2. i_nlink == 0, we are not the final opener (and cannot deallocate)
+ * 3. i_nlink > 0
+ *
+ * If the fs is read only, then we have to treat all cases as per #3
+ * since we are unable to do any deallocation. The inode will be
+ * deallocated by the next read/write node to attempt an allocation
+ * in the same resource group
+ *
  * We have to (at the moment) hold the inodes main lock to cover
  * the gap between unlocking the shared lock on the iopen lock and
  * taking the exclusive lock. I'd rather do a shared -> exclusive
@@ -1470,6 +1488,8 @@ static void gfs2_evict_inode(struct inode *inode)
 	if (error)
 		goto out_truncate;
 
+	/* Case 1 starts here */
+
 	if (S_ISDIR(inode->i_mode) &&
 	    (ip->i_diskflags & GFS2_DIF_EXHASH)) {
 		error = gfs2_dir_exhash_dealloc(ip);
@@ -1493,13 +1513,16 @@ static void gfs2_evict_inode(struct inode *inode)
 	goto out_unlock;
 
 out_truncate:
+	/* Case 2 starts here */
 	error = gfs2_trans_begin(sdp, 0, sdp->sd_jdesc->jd_blocks);
 	if (error)
 		goto out_unlock;
-	gfs2_final_release_pages(ip);
+	/* Needs to be done before glock release & also in a transaction */
+	truncate_inode_pages(&inode->i_data, 0);
 	gfs2_trans_end(sdp);
 
 out_unlock:
+	/* Error path for case 1 */
 	if (test_bit(HIF_HOLDER, &ip->i_iopen_gh.gh_iflags))
 		gfs2_glock_dq(&ip->i_iopen_gh);
 	gfs2_holder_uninit(&ip->i_iopen_gh);
@@ -1507,6 +1530,7 @@ out_unlock:
 	if (error && error != GLR_TRYFAILED && error != -EROFS)
 		fs_warn(sdp, "gfs2_evict_inode: %d\n", error);
 out:
+	/* Case 3 starts here */
 	truncate_inode_pages(&inode->i_data, 0);
 	end_writeback(inode);
 

Bu fark içinde çok fazla dosya değişikliği olduğu için bazı dosyalar gösterilmiyor