clk/exynos5250: add mout_hdmi mux clock for hdmi

hdmi driver needs to change the parent of hdmi clock
frequently between pixel clock and hdmiphy clock. hdmiphy is
not stable after power on and for a short interval while changing
the phy configuration. For this duration pixel clock is used to
clock hdmi.

This patch is exposing the mux for changing parent.

Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

Documentation/devicetree/bindings/clock/exynos5250-clock.txt

@@ -159,6 +159,14 @@ clock which they consume.
   hdmi			344
   g2d			345
 
+
+   [Clock Muxes]
+
+  Clock			ID
+  ----------------------------
+  mout_hdmi		1024
+
+
 Example 1: An example of a clock controller node is listed below.
 
 	clock: clock-controller@0x10010000 {

drivers/clk/samsung/clk-exynos5250.c

@@ -102,6 +102,9 @@ enum exynos5250_clks {
 	tzpc2, tzpc3, tzpc4, tzpc5, tzpc6, tzpc7, tzpc8, tzpc9, hdmi_cec, mct,
 	wdt, rtc, tmu, fimd1, mie1, dsim0, dp, mixer, hdmi, g2d,
 
+	/* mux clocks */
+	mout_hdmi = 1024,
+
 	nr_clks,
 };
 
@@ -234,7 +237,7 @@ static struct samsung_mux_clock exynos5250_mux_clks[] __initdata = {
 	MUX(none, "mout_fimd1", mout_group1_p, SRC_DISP1_0, 0, 4),
 	MUX(none, "mout_mipi1", mout_group1_p, SRC_DISP1_0, 12, 4),
 	MUX(none, "mout_dp", mout_group1_p, SRC_DISP1_0, 16, 4),
-	MUX(none, "mout_hdmi", mout_hdmi_p, SRC_DISP1_0, 20, 1),
+	MUX(mout_hdmi, "mout_hdmi", mout_hdmi_p, SRC_DISP1_0, 20, 1),
 	MUX(none, "mout_audio0", mout_audio0_p, SRC_MAU, 0, 4),
 	MUX(none, "mout_mmc0", mout_group1_p, SRC_FSYS, 0, 4),
 	MUX(none, "mout_mmc1", mout_group1_p, SRC_FSYS, 4, 4),