Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: stlc45xx: convert config_interface to bss_info_changed, fixing a build error
  Staging: comedi: s626: use subvendor:subdevice ids for SAA7146 board
  Staging: prevent rtl8192su from crashing dev_ioctl in SIOCGIWNAME
  Staging: prevent rtl8187se from crashing dev_ioctl() in SIOCGIWNAME
  Staging: rtl8192su: convert to net_device_ops
  Staging: serqt_usb2: declare qt_open static in serqt_usb2
  Staging: serqt_usb2: fix qt_close parameters in serqt_usb2
  Staging: comedi: jr3_pci.c: add required includes
  Staging: meilhaus: add email address to TODO
  Staging: rspiusb: use NULL virtual address instead of a bogus one
  Staging: vt6655: compile fix
  Staging: rt2870: Add USB ID for Sitecom WL-608

drivers/staging/comedi/drivers/jr3_pci.c

@@ -45,6 +45,8 @@ Devices: [JR3] PCI force sensor board (jr3_pci)
 #include <linux/delay.h>
 #include <linux/ctype.h>
 #include <linux/firmware.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
 #include "comedi_pci.h"
 #include "jr3_pci.h"
 

drivers/staging/comedi/drivers/s626.c

@@ -111,9 +111,13 @@ static const struct s626_board s626_boards[] = {
 #define PCI_VENDOR_ID_S626 0x1131
 #define PCI_DEVICE_ID_S626 0x7146
 
+/*
+ * For devices with vendor:device id == 0x1131:0x7146 you must specify
+ * also subvendor:subdevice ids, because otherwise it will conflict with
+ * Philips SAA7146 media/dvb based cards.
+ */
 static DEFINE_PCI_DEVICE_TABLE(s626_pci_table) = {
-	{PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		0},
+	{PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626, 0x6000, 0x0272, 0, 0, 0},
 	{0}
 };
 
@@ -499,25 +503,26 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	resource_size_t resourceStart;
 	dma_addr_t appdma;
 	struct comedi_subdevice *s;
-	struct pci_dev *pdev;
+	const struct pci_device_id *ids;
+	struct pci_dev *pdev = NULL;
 
 	if (alloc_private(dev, sizeof(struct s626_private)) < 0)
 		return -ENOMEM;
 
-	for (pdev = pci_get_device(PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626,
-			NULL); pdev != NULL;
-		pdev = pci_get_device(PCI_VENDOR_ID_S626,
-			PCI_DEVICE_ID_S626, pdev)) {
-		if (it->options[0] || it->options[1]) {
-			if (pdev->bus->number == it->options[0] &&
-				PCI_SLOT(pdev->devfn) == it->options[1]) {
+	for (i = 0; i < (ARRAY_SIZE(s626_pci_table) - 1) && !pdev; i++) {
+		ids = &s626_pci_table[i];
+		do {
+			pdev = pci_get_subsys(ids->vendor, ids->device, ids->subvendor,
+					      ids->subdevice, pdev);
+
+			if ((it->options[0] || it->options[1]) && pdev) {
 				/* matches requested bus/slot */
+				if (pdev->bus->number == it->options[0] &&
+				    PCI_SLOT(pdev->devfn) == it->options[1])
+					break;
+			} else
 				break;
-			}
-		} else {
-			/* no bus/slot specified */
-			break;
-		}
+		} while (1);
 	}
 	devpriv->pdev = pdev;
 

drivers/staging/meilhaus/TODO

@@ -7,4 +7,4 @@ TODO:
 	- possible comedi merge
 
 Please send cleanup patches to Greg Kroah-Hartman <greg@kroah.com>
-and CC: David Kiliani <mail@davidkiliani.de>
+and CC: David Kiliani <mail@davidkiliani.de> and Meilhaus Support <support@meilhaus.de>

drivers/staging/rspiusb/rspiusb.c

@@ -444,8 +444,7 @@ static void piusb_write_bulk_callback(struct urb *urb)
 			__func__, status);
 
 	pdx->pendingWrite = 0;
-	usb_buffer_free(urb->dev, urb->transfer_buffer_length,
-			urb->transfer_buffer, urb->transfer_dma);
+	kfree(urb->transfer_buffer);
 }
 
 int piusb_output(struct ioctl_struct *io, unsigned char *uBuf, int len,
@@ -457,9 +456,7 @@ int piusb_output(struct ioctl_struct *io, unsigned char *uBuf, int len,
 
 	urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (urb != NULL) {
-		kbuf =
-		    usb_buffer_alloc(pdx->udev, len, GFP_KERNEL,
-				     &urb->transfer_dma);
+		kbuf = kmalloc(len, GFP_KERNEL);
 		if (!kbuf) {
 			dev_err(&pdx->udev->dev, "buffer_alloc failed\n");
 			return -ENOMEM;
@@ -470,7 +467,6 @@ int piusb_output(struct ioctl_struct *io, unsigned char *uBuf, int len,
 		}
 		usb_fill_bulk_urb(urb, pdx->udev, pdx->hEP[io->endpoint], kbuf,
 				  len, piusb_write_bulk_callback, pdx);
-		urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 		err = usb_submit_urb(urb, GFP_KERNEL);
 		if (err) {
 			dev_err(&pdx->udev->dev,
@@ -641,7 +637,7 @@ static int MapUserBuffer(struct ioctl_struct *io, struct device_extension *pdx)
 	numPagesRequired =
 	    ((uaddr & ~PAGE_MASK) + count + ~PAGE_MASK) >> PAGE_SHIFT;
 	dbg("Number of pages needed = %d", numPagesRequired);
-	maplist_p = vmalloc(numPagesRequired * sizeof(struct page));
+	maplist_p = vmalloc(numPagesRequired * sizeof(struct page *));
 	if (!maplist_p) {
 		dbg("Can't Allocate Memory for maplist_p");
 		return -ENOMEM;
@@ -712,9 +708,7 @@ static int MapUserBuffer(struct ioctl_struct *io, struct device_extension *pdx)
 		usb_fill_bulk_urb(pdx->PixelUrb[frameInfo][i],
 				  pdx->udev,
 				  epAddr,
-				  (dma_addr_t *) sg_dma_address(&pdx->
-								sgl[frameInfo]
-								[i]),
+				  NULL, // non-DMA HC? buy a better hardware
 				  sg_dma_len(&pdx->sgl[frameInfo][i]),
 				  piusb_readPIXEL_callback, (void *)pdx);
 		pdx->PixelUrb[frameInfo][i]->transfer_dma =

drivers/staging/rt2870/rt2870.h

@@ -89,6 +89,7 @@
 	{USB_DEVICE(0x0DF6,0x002C)}, /* Sitecom */		\
 	{USB_DEVICE(0x0DF6,0x002D)}, /* Sitecom */		\
 	{USB_DEVICE(0x0DF6,0x0039)}, /* Sitecom */		\
+	{USB_DEVICE(0x0DF6,0x003F)}, /* Sitecom WL-608 */	\
 	{USB_DEVICE(0x14B2,0x3C06)}, /* Conceptronic */		\
 	{USB_DEVICE(0x14B2,0x3C28)}, /* Conceptronic */		\
 	{USB_DEVICE(0x2019,0xED06)}, /* Planex Communications, Inc. */		\

drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c

@@ -461,19 +461,19 @@ int ieee80211_wx_get_name(struct ieee80211_device *ieee,
 			     struct iw_request_info *info,
 			     union iwreq_data *wrqu, char *extra)
 {
-	strcpy(wrqu->name, "802.11");
+	strlcpy(wrqu->name, "802.11", IFNAMSIZ);
 	if(ieee->modulation & IEEE80211_CCK_MODULATION){
-		strcat(wrqu->name, "b");
+		strlcat(wrqu->name, "b", IFNAMSIZ);
 		if(ieee->modulation & IEEE80211_OFDM_MODULATION)
-			strcat(wrqu->name, "/g");
+			strlcat(wrqu->name, "/g", IFNAMSIZ);
 	}else if(ieee->modulation & IEEE80211_OFDM_MODULATION)
-		strcat(wrqu->name, "g");
+		strlcat(wrqu->name, "g", IFNAMSIZ);
 
 	if((ieee->state == IEEE80211_LINKED) ||
 		(ieee->state == IEEE80211_LINKED_SCANNING))
-		strcat(wrqu->name," linked");
+		strlcat(wrqu->name,"  link", IFNAMSIZ);
 	else if(ieee->state != IEEE80211_NOLINK)
-		strcat(wrqu->name," link..");
+		strlcat(wrqu->name," .....", IFNAMSIZ);
 
 
 	return 0;

drivers/staging/rtl8192su/Kconfig

@@ -1,6 +1,6 @@
 config RTL8192SU
 	tristate "RealTek RTL8192SU Wireless LAN NIC driver"
 	depends on PCI
-	depends on WIRELESS_EXT && COMPAT_NET_DEV_OPS
+	depends on WIRELESS_EXT
 	default N
 	---help---

drivers/staging/rtl8192su/ieee80211/ieee80211_module.c

@@ -118,7 +118,6 @@ struct net_device *alloc_ieee80211(int sizeof_priv)
 #else
 	ieee = (struct ieee80211_device *)dev->priv;
 #endif
-	dev->hard_start_xmit = ieee80211_xmit;
 
 	memset(ieee, 0, sizeof(struct ieee80211_device)+sizeof_priv);
 	ieee->dev = dev;

drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c

@@ -548,21 +548,21 @@ int ieee80211_wx_get_name(struct ieee80211_device *ieee,
 			     struct iw_request_info *info,
 			     union iwreq_data *wrqu, char *extra)
 {
-	strcpy(wrqu->name, "802.11");
+	strlcpy(wrqu->name, "802.11", IFNAMSIZ);
 	if(ieee->modulation & IEEE80211_CCK_MODULATION){
-		strcat(wrqu->name, "b");
+		strlcat(wrqu->name, "b", IFNAMSIZ);
 		if(ieee->modulation & IEEE80211_OFDM_MODULATION)
-			strcat(wrqu->name, "/g");
+			strlcat(wrqu->name, "/g", IFNAMSIZ);
 	}else if(ieee->modulation & IEEE80211_OFDM_MODULATION)
-		strcat(wrqu->name, "g");
+		strlcat(wrqu->name, "g", IFNAMSIZ);
 	if (ieee->mode & (IEEE_N_24G | IEEE_N_5G))
-		strcat(wrqu->name, "/n");
+		strlcat(wrqu->name, "/n", IFNAMSIZ);
 
 	if((ieee->state == IEEE80211_LINKED) ||
 		(ieee->state == IEEE80211_LINKED_SCANNING))
-		strcat(wrqu->name," linked");
+		strlcat(wrqu->name, "  link", IFNAMSIZ);
 	else if(ieee->state != IEEE80211_NOLINK)
-		strcat(wrqu->name," link..");
+		strlcat(wrqu->name, " .....", IFNAMSIZ);
 
 
 	return 0;

drivers/staging/rtl8192su/r8192U_core.c

@@ -12132,6 +12132,19 @@ static void HalUsbSetQueuePipeMapping8192SUsb(struct usb_interface *intf, struct
 }
 #endif
 
+static const struct net_device_ops rtl8192_netdev_ops = {
+	.ndo_open		= rtl8192_open,
+	.ndo_stop		= rtl8192_close,
+	.ndo_get_stats		= rtl8192_stats,
+	.ndo_tx_timeout		= tx_timeout,
+	.ndo_do_ioctl		= rtl8192_ioctl,
+	.ndo_set_multicast_list	= r8192_set_multicast,
+	.ndo_set_mac_address	= r8192_set_mac_adr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_start_xmit		= ieee80211_xmit,
+};
+
 #if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
 static int __devinit rtl8192_usb_probe(struct usb_interface *intf,
 			 const struct usb_device_id *id)
@@ -12186,15 +12199,7 @@ static void * __devinit rtl8192_usb_probe(struct usb_device *udev,
 	priv->ops = &rtl8192u_ops;
 #endif
 
-	dev->open = rtl8192_open;
-	dev->stop = rtl8192_close;
-	//dev->hard_start_xmit = rtl8192_8023_hard_start_xmit;
-	dev->tx_timeout = tx_timeout;
-	//dev->wireless_handlers = &r8192_wx_handlers_def;
-	dev->do_ioctl = rtl8192_ioctl;
-	dev->set_multicast_list = r8192_set_multicast;
-	dev->set_mac_address = r8192_set_mac_adr;
-	dev->get_stats = rtl8192_stats;
+	dev->netdev_ops = &rtl8192_netdev_ops;
 
          //DMESG("Oops: i'm coming\n");
 #if WIRELESS_EXT >= 12

drivers/staging/rtl8192su/r8192U_pm.c

@@ -35,7 +35,9 @@ int rtl8192U_suspend(struct usb_interface *intf, pm_message_t state)
 		      return 0;
 		 }
 
-		dev->stop(dev);
+		if (dev->netdev_ops->ndo_stop)
+			dev->netdev_ops->ndo_stop(dev);
+
 		mdelay(10);
 
 		netif_device_detach(dev);
@@ -61,7 +63,9 @@ int rtl8192U_resume (struct usb_interface *intf)
 		}
 
 		netif_device_attach(dev);
-		dev->open(dev);
+
+		if (dev->netdev_ops->ndo_open)
+			dev->netdev_ops->ndo_open(dev);
 	}
 
         return 0;

drivers/staging/serqt_usb2/serqt_usb2.c

@@ -866,7 +866,7 @@ static void qt_release(struct usb_serial *serial)
 
 }
 
-int qt_open(struct tty_struct *tty,
+static int qt_open(struct tty_struct *tty,
 	    struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial *serial;
@@ -1041,17 +1041,19 @@ static void qt_block_until_empty(struct tty_struct *tty,
 	}
 }
 
-static void qt_close(struct tty_struct *tty, struct usb_serial_port *port,
-		     struct file *filp)
+static void qt_close( struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct quatech_port *qt_port;
 	struct quatech_port *port0;
+	struct tty_struct *tty;
 	int status;
 	unsigned int index;
 	status = 0;
 
 	dbg("%s - port %d\n", __func__, port->number);
+
+	tty = tty_port_tty_get(&port->port);
 	index = tty->index - serial->minor;
 
 	qt_port = qt_get_port_private(port);

drivers/staging/stlc45xx/stlc45xx.c

@@ -2235,24 +2235,6 @@ static void stlc45xx_op_remove_interface(struct ieee80211_hw *hw,
 	stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
 }
 
-static int stlc45xx_op_config_interface(struct ieee80211_hw *hw,
-					struct ieee80211_vif *vif,
-					struct ieee80211_if_conf *conf)
-{
-	struct stlc45xx *stlc = hw->priv;
-
-	stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
-	mutex_lock(&stlc->mutex);
-
-	memcpy(stlc->bssid, conf->bssid, ETH_ALEN);
-	stlc45xx_tx_setup(stlc);
-
-	mutex_unlock(&stlc->mutex);
-
-	return 0;
-}
-
 static int stlc45xx_op_config(struct ieee80211_hw *hw, u32 changed)
 {
 	struct stlc45xx *stlc = hw->priv;
@@ -2295,6 +2277,14 @@ static void stlc45xx_op_bss_info_changed(struct ieee80211_hw *hw,
 {
 	struct stlc45xx *stlc = hw->priv;
 
+	stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
+	mutex_lock(&stlc->mutex);
+
+	memcpy(stlc->bssid, info->bssid, ETH_ALEN);
+	stlc45xx_tx_setup(stlc);
+
+	mutex_unlock(&stlc->mutex);
+
 	if (changed & BSS_CHANGED_ASSOC) {
 		stlc->associated = info->assoc;
 		if (info->assoc)
@@ -2357,7 +2347,6 @@ static const struct ieee80211_ops stlc45xx_ops = {
 	.add_interface = stlc45xx_op_add_interface,
 	.remove_interface = stlc45xx_op_remove_interface,
 	.config = stlc45xx_op_config,
-	.config_interface = stlc45xx_op_config_interface,
 	.configure_filter = stlc45xx_op_configure_filter,
 	.tx = stlc45xx_op_tx,
 	.bss_info_changed = stlc45xx_op_bss_info_changed,

drivers/staging/vt6655/device_main.c

@@ -344,7 +344,7 @@ static CHIP_INFO chip_info_table[]= {
 };
 
 static struct pci_device_id device_id_table[] __devinitdata = {
-{ 0x1106, 0x3253, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (int)&chip_info_table[0]},
+{ 0x1106, 0x3253, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long)&chip_info_table[0]},
 { 0, }
 };
 #endif
@@ -369,7 +369,7 @@ static int  device_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 
 #ifdef CONFIG_PM
 static int device_notify_reboot(struct notifier_block *, unsigned long event, void *ptr);
-static int viawget_suspend(struct pci_dev *pcid, u32 state);
+static int viawget_suspend(struct pci_dev *pcid, pm_message_t state);
 static int viawget_resume(struct pci_dev *pcid);
 struct notifier_block device_notifier = {
         notifier_call:  device_notify_reboot,
@@ -3941,7 +3941,7 @@ device_notify_reboot(struct notifier_block *nb, unsigned long event, void *p)
         while ((pdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pdev)) != NULL) {
             if(pci_dev_driver(pdev) == &device_driver) {
                 if (pci_get_drvdata(pdev))
-                    viawget_suspend(pdev, 3);
+                    viawget_suspend(pdev, PMSG_HIBERNATE);
             }
         }
     }
@@ -3949,7 +3949,7 @@ device_notify_reboot(struct notifier_block *nb, unsigned long event, void *p)
 }
 
 static int
-viawget_suspend(struct pci_dev *pcid, u32 state)
+viawget_suspend(struct pci_dev *pcid, pm_message_t state)
 {
     int power_status;   // to silence the compiler
 
@@ -3971,7 +3971,7 @@ viawget_suspend(struct pci_dev *pcid, u32 state)
     memset(pMgmt->abyCurrBSSID, 0, 6);
     pMgmt->eCurrState = WMAC_STATE_IDLE;
     pci_disable_device(pcid);
-    power_status = pci_set_power_state(pcid, state);
+    power_status = pci_set_power_state(pcid, pci_choose_state(pcid, state));
     spin_unlock_irq(&pDevice->lock);
     return 0;
 }