bnx2x: registers dump fixes

Fixes in registers dump:
        - Properly calculate dump length for 57712.
        - Prevent HW blocks parity attentions when dumping registers in order to
prevent false parity errors handling.
        - Update the bnx2x_dump.h file: old one had a few bugs that could cause
fatal HW error as a result of a registers dump.

Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/bnx2x/bnx2x.h

@@ -636,6 +636,7 @@ struct bnx2x_common {
 
 #define CHIP_METAL(bp)			(bp->common.chip_id & 0x00000ff0)
 #define CHIP_BOND_ID(bp)		(bp->common.chip_id & 0x0000000f)
+#define CHIP_PARITY_ENABLED(bp)	(CHIP_IS_E1(bp) || CHIP_IS_E1H(bp))
 
 	int			flash_size;
 #define NVRAM_1MB_SIZE			0x20000	/* 1M bit in bytes */

drivers/net/bnx2x/bnx2x_ethtool.c

@@ -24,6 +24,7 @@
 #include "bnx2x.h"
 #include "bnx2x_cmn.h"
 #include "bnx2x_dump.h"
+#include "bnx2x_init.h"
 
 /* Note: in the format strings below %s is replaced by the queue-name which is
  * either its index or 'fcoe' for the fcoe queue. Make sure the format string
@@ -472,7 +473,7 @@ static int bnx2x_get_regs_len(struct net_device *dev)
 {
 	struct bnx2x *bp = netdev_priv(dev);
 	int regdump_len = 0;
-	int i;
+	int i, j, k;
 
 	if (CHIP_IS_E1(bp)) {
 		for (i = 0; i < REGS_COUNT; i++)
@@ -502,6 +503,15 @@ static int bnx2x_get_regs_len(struct net_device *dev)
 			if (IS_E2_ONLINE(wreg_addrs_e2[i].info))
 				regdump_len += wreg_addrs_e2[i].size *
 					(1 + wreg_addrs_e2[i].read_regs_count);
+
+		for (i = 0; i < PAGE_MODE_VALUES_E2; i++)
+			for (j = 0; j < PAGE_WRITE_REGS_E2; j++) {
+				for (k = 0; k < PAGE_READ_REGS_E2; k++)
+					if (IS_E2_ONLINE(page_read_regs_e2[k].
+							 info))
+						regdump_len +=
+						page_read_regs_e2[k].size;
+			}
 	}
 	regdump_len *= 4;
 	regdump_len += sizeof(struct dump_hdr);
@@ -539,6 +549,12 @@ static void bnx2x_get_regs(struct net_device *dev,
 	if (!netif_running(bp->dev))
 		return;
 
+	/* Disable parity attentions as long as following dump may
+	 * cause false alarms by reading never written registers. We
+	 * will re-enable parity attentions right after the dump.
+	 */
+	bnx2x_disable_blocks_parity(bp);
+
 	dump_hdr.hdr_size = (sizeof(struct dump_hdr) / 4) - 1;
 	dump_hdr.dump_sign = dump_sign_all;
 	dump_hdr.xstorm_waitp = REG_RD(bp, XSTORM_WAITP_ADDR);
@@ -580,6 +596,10 @@ static void bnx2x_get_regs(struct net_device *dev,
 
 		bnx2x_read_pages_regs_e2(bp, p);
 	}
+	/* Re-enable parity attentions */
+	bnx2x_clear_blocks_parity(bp);
+	if (CHIP_PARITY_ENABLED(bp))
+		bnx2x_enable_blocks_parity(bp);
 }
 
 #define PHY_FW_VER_LEN			20

drivers/net/bnx2x/bnx2x_init.h

@@ -192,5 +192,225 @@ struct src_ent {
 	u64 next;
 };
 
+/****************************************************************************
+* Parity configuration
+****************************************************************************/
+#define BLOCK_PRTY_INFO(block, en_mask, m1, m1h, m2) \
+{ \
+	block##_REG_##block##_PRTY_MASK, \
+	block##_REG_##block##_PRTY_STS_CLR, \
+	en_mask, {m1, m1h, m2}, #block \
+}
+
+#define BLOCK_PRTY_INFO_0(block, en_mask, m1, m1h, m2) \
+{ \
+	block##_REG_##block##_PRTY_MASK_0, \
+	block##_REG_##block##_PRTY_STS_CLR_0, \
+	en_mask, {m1, m1h, m2}, #block"_0" \
+}
+
+#define BLOCK_PRTY_INFO_1(block, en_mask, m1, m1h, m2) \
+{ \
+	block##_REG_##block##_PRTY_MASK_1, \
+	block##_REG_##block##_PRTY_STS_CLR_1, \
+	en_mask, {m1, m1h, m2}, #block"_1" \
+}
+
+static const struct {
+	u32 mask_addr;
+	u32 sts_clr_addr;
+	u32 en_mask;		/* Mask to enable parity attentions */
+	struct {
+		u32 e1;		/* 57710 */
+		u32 e1h;	/* 57711 */
+		u32 e2;		/* 57712 */
+	} reg_mask;		/* Register mask (all valid bits) */
+	char name[7];		/* Block's longest name is 6 characters long
+				 * (name + suffix)
+				 */
+} bnx2x_blocks_parity_data[] = {
+	/* bit 19 masked */
+	/* REG_WR(bp, PXP_REG_PXP_PRTY_MASK, 0x80000); */
+	/* bit 5,18,20-31 */
+	/* REG_WR(bp, PXP2_REG_PXP2_PRTY_MASK_0, 0xfff40020); */
+	/* bit 5 */
+	/* REG_WR(bp, PXP2_REG_PXP2_PRTY_MASK_1, 0x20);	*/
+	/* REG_WR(bp, HC_REG_HC_PRTY_MASK, 0x0); */
+	/* REG_WR(bp, MISC_REG_MISC_PRTY_MASK, 0x0); */
+
+	/* Block IGU, MISC, PXP and PXP2 parity errors as long as we don't
+	 * want to handle "system kill" flow at the moment.
+	 */
+	BLOCK_PRTY_INFO(PXP, 0x3ffffff, 0x3ffffff, 0x3ffffff, 0x3ffffff),
+	BLOCK_PRTY_INFO_0(PXP2,	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff),
+	BLOCK_PRTY_INFO_1(PXP2,	0x7ff, 0x7f, 0x7f, 0x7ff),
+	BLOCK_PRTY_INFO(HC, 0x7, 0x7, 0x7, 0),
+	BLOCK_PRTY_INFO(IGU, 0x7ff, 0, 0, 0x7ff),
+	BLOCK_PRTY_INFO(MISC, 0x1, 0x1, 0x1, 0x1),
+	BLOCK_PRTY_INFO(QM, 0, 0x1ff, 0xfff, 0xfff),
+	BLOCK_PRTY_INFO(DORQ, 0, 0x3, 0x3, 0x3),
+	{GRCBASE_UPB + PB_REG_PB_PRTY_MASK,
+		GRCBASE_UPB + PB_REG_PB_PRTY_STS_CLR, 0,
+		{0xf, 0xf, 0xf}, "UPB"},
+	{GRCBASE_XPB + PB_REG_PB_PRTY_MASK,
+		GRCBASE_XPB + PB_REG_PB_PRTY_STS_CLR, 0,
+		{0xf, 0xf, 0xf}, "XPB"},
+	BLOCK_PRTY_INFO(SRC, 0x4, 0x7, 0x7, 0x7),
+	BLOCK_PRTY_INFO(CDU, 0, 0x1f, 0x1f, 0x1f),
+	BLOCK_PRTY_INFO(CFC, 0, 0xf, 0xf, 0xf),
+	BLOCK_PRTY_INFO(DBG, 0, 0x1, 0x1, 0x1),
+	BLOCK_PRTY_INFO(DMAE, 0, 0xf, 0xf, 0xf),
+	BLOCK_PRTY_INFO(BRB1, 0, 0xf, 0xf, 0xf),
+	BLOCK_PRTY_INFO(PRS, (1<<6), 0xff, 0xff, 0xff),
+	BLOCK_PRTY_INFO(TSDM, 0x18, 0x7ff, 0x7ff, 0x7ff),
+	BLOCK_PRTY_INFO(CSDM, 0x8, 0x7ff, 0x7ff, 0x7ff),
+	BLOCK_PRTY_INFO(USDM, 0x38, 0x7ff, 0x7ff, 0x7ff),
+	BLOCK_PRTY_INFO(XSDM, 0x8, 0x7ff, 0x7ff, 0x7ff),
+	BLOCK_PRTY_INFO_0(TSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff),
+	BLOCK_PRTY_INFO_1(TSEM, 0, 0x3, 0x1f, 0x3f),
+	BLOCK_PRTY_INFO_0(USEM, 0, 0xffffffff, 0xffffffff, 0xffffffff),
+	BLOCK_PRTY_INFO_1(USEM, 0, 0x3, 0x1f, 0x1f),
+	BLOCK_PRTY_INFO_0(CSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff),
+	BLOCK_PRTY_INFO_1(CSEM, 0, 0x3, 0x1f, 0x1f),
+	BLOCK_PRTY_INFO_0(XSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff),
+	BLOCK_PRTY_INFO_1(XSEM, 0, 0x3, 0x1f, 0x3f),
+};
+
+
+/* [28] MCP Latched rom_parity
+ * [29] MCP Latched ump_rx_parity
+ * [30] MCP Latched ump_tx_parity
+ * [31] MCP Latched scpad_parity
+ */
+#define MISC_AEU_ENABLE_MCP_PRTY_BITS	\
+	(AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | \
+	 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | \
+	 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY | \
+	 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY)
+
+/* Below registers control the MCP parity attention output. When
+ * MISC_AEU_ENABLE_MCP_PRTY_BITS are set - attentions are
+ * enabled, when cleared - disabled.
+ */
+static const u32 mcp_attn_ctl_regs[] = {
+	MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0,
+	MISC_REG_AEU_ENABLE4_NIG_0,
+	MISC_REG_AEU_ENABLE4_PXP_0,
+	MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0,
+	MISC_REG_AEU_ENABLE4_NIG_1,
+	MISC_REG_AEU_ENABLE4_PXP_1
+};
+
+static inline void bnx2x_set_mcp_parity(struct bnx2x *bp, u8 enable)
+{
+	int i;
+	u32 reg_val;
+
+	for (i = 0; i < ARRAY_SIZE(mcp_attn_ctl_regs); i++) {
+		reg_val = REG_RD(bp, mcp_attn_ctl_regs[i]);
+
+		if (enable)
+			reg_val |= MISC_AEU_ENABLE_MCP_PRTY_BITS;
+		else
+			reg_val &= ~MISC_AEU_ENABLE_MCP_PRTY_BITS;
+
+		REG_WR(bp, mcp_attn_ctl_regs[i], reg_val);
+	}
+}
+
+static inline u32 bnx2x_parity_reg_mask(struct bnx2x *bp, int idx)
+{
+	if (CHIP_IS_E1(bp))
+		return bnx2x_blocks_parity_data[idx].reg_mask.e1;
+	else if (CHIP_IS_E1H(bp))
+		return bnx2x_blocks_parity_data[idx].reg_mask.e1h;
+	else
+		return bnx2x_blocks_parity_data[idx].reg_mask.e2;
+}
+
+static inline void bnx2x_disable_blocks_parity(struct bnx2x *bp)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(bnx2x_blocks_parity_data); i++) {
+		u32 dis_mask = bnx2x_parity_reg_mask(bp, i);
+
+		if (dis_mask) {
+			REG_WR(bp, bnx2x_blocks_parity_data[i].mask_addr,
+			       dis_mask);
+			DP(NETIF_MSG_HW, "Setting parity mask "
+						 "for %s to\t\t0x%x\n",
+				    bnx2x_blocks_parity_data[i].name, dis_mask);
+		}
+	}
+
+	/* Disable MCP parity attentions */
+	bnx2x_set_mcp_parity(bp, false);
+}
+
+/**
+ * Clear the parity error status registers.
+ */
+static inline void bnx2x_clear_blocks_parity(struct bnx2x *bp)
+{
+	int i;
+	u32 reg_val, mcp_aeu_bits =
+		AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY |
+		AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY |
+		AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY |
+		AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY;
+
+	/* Clear SEM_FAST parities */
+	REG_WR(bp, XSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
+	REG_WR(bp, TSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
+	REG_WR(bp, USEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
+	REG_WR(bp, CSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
+
+	for (i = 0; i < ARRAY_SIZE(bnx2x_blocks_parity_data); i++) {
+		u32 reg_mask = bnx2x_parity_reg_mask(bp, i);
+
+		if (reg_mask) {
+			reg_val = REG_RD(bp, bnx2x_blocks_parity_data[i].
+					 sts_clr_addr);
+			if (reg_val & reg_mask)
+				DP(NETIF_MSG_HW,
+					    "Parity errors in %s: 0x%x\n",
+					    bnx2x_blocks_parity_data[i].name,
+					    reg_val & reg_mask);
+		}
+	}
+
+	/* Check if there were parity attentions in MCP */
+	reg_val = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_4_MCP);
+	if (reg_val & mcp_aeu_bits)
+		DP(NETIF_MSG_HW, "Parity error in MCP: 0x%x\n",
+		   reg_val & mcp_aeu_bits);
+
+	/* Clear parity attentions in MCP:
+	 * [7]  clears Latched rom_parity
+	 * [8]  clears Latched ump_rx_parity
+	 * [9]  clears Latched ump_tx_parity
+	 * [10] clears Latched scpad_parity (both ports)
+	 */
+	REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x780);
+}
+
+static inline void bnx2x_enable_blocks_parity(struct bnx2x *bp)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(bnx2x_blocks_parity_data); i++) {
+		u32 reg_mask = bnx2x_parity_reg_mask(bp, i);
+
+		if (reg_mask)
+			REG_WR(bp, bnx2x_blocks_parity_data[i].mask_addr,
+				bnx2x_blocks_parity_data[i].en_mask & reg_mask);
+	}
+
+	/* Enable MCP parity attentions */
+	bnx2x_set_mcp_parity(bp, true);
+}
+
+
 #endif /* BNX2X_INIT_H */
 

drivers/net/bnx2x/bnx2x_main.c

@@ -3152,7 +3152,6 @@ static inline void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn)
 #define LOAD_COUNTER_MASK	(((u32)0x1 << LOAD_COUNTER_BITS) - 1)
 #define RESET_DONE_FLAG_MASK	(~LOAD_COUNTER_MASK)
 #define RESET_DONE_FLAG_SHIFT	LOAD_COUNTER_BITS
-#define CHIP_PARITY_SUPPORTED(bp)   (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp))
 
 /*
  * should be run under rtnl lock
@@ -3527,7 +3526,7 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
 	   try to handle this event */
 	bnx2x_acquire_alr(bp);
 
-	if (bnx2x_chk_parity_attn(bp)) {
+	if (CHIP_PARITY_ENABLED(bp) && bnx2x_chk_parity_attn(bp)) {
 		bp->recovery_state = BNX2X_RECOVERY_INIT;
 		bnx2x_set_reset_in_progress(bp);
 		schedule_delayed_work(&bp->reset_task, 0);
@@ -4754,7 +4753,7 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
 	return 0; /* OK */
 }
 
-static void enable_blocks_attention(struct bnx2x *bp)
+static void bnx2x_enable_blocks_attention(struct bnx2x *bp)
 {
 	REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0);
 	if (CHIP_IS_E2(bp))
@@ -4808,53 +4807,9 @@ static void enable_blocks_attention(struct bnx2x *bp)
 	REG_WR(bp, CDU_REG_CDU_INT_MASK, 0);
 	REG_WR(bp, DMAE_REG_DMAE_INT_MASK, 0);
 /*	REG_WR(bp, MISC_REG_MISC_INT_MASK, 0); */
-	REG_WR(bp, PBF_REG_PBF_INT_MASK, 0X18);		/* bit 3,4 masked */
+	REG_WR(bp, PBF_REG_PBF_INT_MASK, 0x18);		/* bit 3,4 masked */
 }
 
-static const struct {
-	u32 addr;
-	u32 mask;
-} bnx2x_parity_mask[] = {
-	{PXP_REG_PXP_PRTY_MASK,		0x3ffffff},
-	{PXP2_REG_PXP2_PRTY_MASK_0,	0xffffffff},
-	{PXP2_REG_PXP2_PRTY_MASK_1,	0x7f},
-	{HC_REG_HC_PRTY_MASK,		0x7},
-	{MISC_REG_MISC_PRTY_MASK,	0x1},
-	{QM_REG_QM_PRTY_MASK,		0x0},
-	{DORQ_REG_DORQ_PRTY_MASK,	0x0},
-	{GRCBASE_UPB + PB_REG_PB_PRTY_MASK, 0x0},
-	{GRCBASE_XPB + PB_REG_PB_PRTY_MASK, 0x0},
-	{SRC_REG_SRC_PRTY_MASK,		0x4}, /* bit 2 */
-	{CDU_REG_CDU_PRTY_MASK,		0x0},
-	{CFC_REG_CFC_PRTY_MASK,		0x0},
-	{DBG_REG_DBG_PRTY_MASK,		0x0},
-	{DMAE_REG_DMAE_PRTY_MASK,	0x0},
-	{BRB1_REG_BRB1_PRTY_MASK,	0x0},
-	{PRS_REG_PRS_PRTY_MASK,		(1<<6)},/* bit 6 */
-	{TSDM_REG_TSDM_PRTY_MASK,	0x18},	/* bit 3,4 */
-	{CSDM_REG_CSDM_PRTY_MASK,	0x8},	/* bit 3 */
-	{USDM_REG_USDM_PRTY_MASK,	0x38},  /* bit 3,4,5 */
-	{XSDM_REG_XSDM_PRTY_MASK,	0x8},	/* bit 3 */
-	{TSEM_REG_TSEM_PRTY_MASK_0,	0x0},
-	{TSEM_REG_TSEM_PRTY_MASK_1,	0x0},
-	{USEM_REG_USEM_PRTY_MASK_0,	0x0},
-	{USEM_REG_USEM_PRTY_MASK_1,	0x0},
-	{CSEM_REG_CSEM_PRTY_MASK_0,	0x0},
-	{CSEM_REG_CSEM_PRTY_MASK_1,	0x0},
-	{XSEM_REG_XSEM_PRTY_MASK_0,	0x0},
-	{XSEM_REG_XSEM_PRTY_MASK_1,	0x0}
-};
-
-static void enable_blocks_parity(struct bnx2x *bp)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(bnx2x_parity_mask); i++)
-		REG_WR(bp, bnx2x_parity_mask[i].addr,
-			bnx2x_parity_mask[i].mask);
-}
-
-
 static void bnx2x_reset_common(struct bnx2x *bp)
 {
 	/* reset_common */
@@ -5350,9 +5305,9 @@ static int bnx2x_init_hw_common(struct bnx2x *bp, u32 load_code)
 	/* clear PXP2 attentions */
 	REG_RD(bp, PXP2_REG_PXP2_INT_STS_CLR_0);
 
-	enable_blocks_attention(bp);
-	if (CHIP_PARITY_SUPPORTED(bp))
-		enable_blocks_parity(bp);
+	bnx2x_enable_blocks_attention(bp);
+	if (CHIP_PARITY_ENABLED(bp))
+		bnx2x_enable_blocks_parity(bp);
 
 	if (!BP_NOMCP(bp)) {
 		/* In E2 2-PORT mode, same ext phy is used for the two paths */

drivers/net/bnx2x/bnx2x_reg.h

@@ -18,6 +18,8 @@
  * WR - Write Clear (write 1 to clear the bit)
  *
  */
+#ifndef BNX2X_REG_H
+#define BNX2X_REG_H
 
 #define ATC_ATC_INT_STS_REG_ADDRESS_ERROR			 (0x1<<0)
 #define ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS		 (0x1<<2)
@@ -39,6 +41,8 @@
 #define BRB1_REG_BRB1_PRTY_MASK 				 0x60138
 /* [R 4] Parity register #0 read */
 #define BRB1_REG_BRB1_PRTY_STS					 0x6012c
+/* [RC 4] Parity register #0 read clear */
+#define BRB1_REG_BRB1_PRTY_STS_CLR				 0x60130
 /* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At
  * address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address
  * BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. Warning -
@@ -132,8 +136,12 @@
 #define CCM_REG_CCM_INT_MASK					 0xd01e4
 /* [R 11] Interrupt register #0 read */
 #define CCM_REG_CCM_INT_STS					 0xd01d8
+/* [RW 27] Parity mask register #0 read/write */
+#define CCM_REG_CCM_PRTY_MASK					 0xd01f4
 /* [R 27] Parity register #0 read */
 #define CCM_REG_CCM_PRTY_STS					 0xd01e8
+/* [RC 27] Parity register #0 read clear */
+#define CCM_REG_CCM_PRTY_STS_CLR				 0xd01ec
 /* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
    REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
    Is used to determine the number of the AG context REG-pairs written back;
@@ -350,6 +358,8 @@
 #define CDU_REG_CDU_PRTY_MASK					 0x10104c
 /* [R 5] Parity register #0 read */
 #define CDU_REG_CDU_PRTY_STS					 0x101040
+/* [RC 5] Parity register #0 read clear */
+#define CDU_REG_CDU_PRTY_STS_CLR				 0x101044
 /* [RC 32] logging of error data in case of a CDU load error:
    {expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error;
    ype_error; ctual_active; ctual_compressed_context}; */
@@ -381,6 +391,8 @@
 #define CFC_REG_CFC_PRTY_MASK					 0x104118
 /* [R 4] Parity register #0 read */
 #define CFC_REG_CFC_PRTY_STS					 0x10410c
+/* [RC 4] Parity register #0 read clear */
+#define CFC_REG_CFC_PRTY_STS_CLR				 0x104110
 /* [RW 21] CID cam access (21:1 - Data; alid - 0) */
 #define CFC_REG_CID_CAM 					 0x104800
 #define CFC_REG_CONTROL0					 0x104028
@@ -466,6 +478,8 @@
 #define CSDM_REG_CSDM_PRTY_MASK 				 0xc22bc
 /* [R 11] Parity register #0 read */
 #define CSDM_REG_CSDM_PRTY_STS					 0xc22b0
+/* [RC 11] Parity register #0 read clear */
+#define CSDM_REG_CSDM_PRTY_STS_CLR				 0xc22b4
 #define CSDM_REG_ENABLE_IN1					 0xc2238
 #define CSDM_REG_ENABLE_IN2					 0xc223c
 #define CSDM_REG_ENABLE_OUT1					 0xc2240
@@ -556,6 +570,9 @@
 /* [R 32] Parity register #0 read */
 #define CSEM_REG_CSEM_PRTY_STS_0				 0x200124
 #define CSEM_REG_CSEM_PRTY_STS_1				 0x200134
+/* [RC 32] Parity register #0 read clear */
+#define CSEM_REG_CSEM_PRTY_STS_CLR_0				 0x200128
+#define CSEM_REG_CSEM_PRTY_STS_CLR_1				 0x200138
 #define CSEM_REG_ENABLE_IN					 0x2000a4
 #define CSEM_REG_ENABLE_OUT					 0x2000a8
 /* [RW 32] This address space contains all registers and memories that are
@@ -648,6 +665,8 @@
 #define DBG_REG_DBG_PRTY_MASK					 0xc0a8
 /* [R 1] Parity register #0 read */
 #define DBG_REG_DBG_PRTY_STS					 0xc09c
+/* [RC 1] Parity register #0 read clear */
+#define DBG_REG_DBG_PRTY_STS_CLR				 0xc0a0
 /* [RW 1] When set the DMAE will process the commands as in E1.5. 1.The
  * function that is used is always SRC-PCI; 2.VF_Valid = 0; 3.VFID=0;
  * 4.Completion function=0; 5.Error handling=0 */
@@ -668,6 +687,8 @@
 #define DMAE_REG_DMAE_PRTY_MASK 				 0x102064
 /* [R 4] Parity register #0 read */
 #define DMAE_REG_DMAE_PRTY_STS					 0x102058
+/* [RC 4] Parity register #0 read clear */
+#define DMAE_REG_DMAE_PRTY_STS_CLR				 0x10205c
 /* [RW 1] Command 0 go. */
 #define DMAE_REG_GO_C0						 0x102080
 /* [RW 1] Command 1 go. */
@@ -734,6 +755,8 @@
 #define DORQ_REG_DORQ_PRTY_MASK 				 0x170190
 /* [R 2] Parity register #0 read */
 #define DORQ_REG_DORQ_PRTY_STS					 0x170184
+/* [RC 2] Parity register #0 read clear */
+#define DORQ_REG_DORQ_PRTY_STS_CLR				 0x170188
 /* [RW 8] The address to write the DPM CID to STORM. */
 #define DORQ_REG_DPM_CID_ADDR					 0x170044
 /* [RW 5] The DPM mode CID extraction offset. */
@@ -842,8 +865,12 @@
 /* [R 1] data availble for error memory. If this bit is clear do not red
  * from error_handling_memory. */
 #define IGU_REG_ERROR_HANDLING_DATA_VALID			 0x130130
+/* [RW 11] Parity mask register #0 read/write */
+#define IGU_REG_IGU_PRTY_MASK					 0x1300a8
 /* [R 11] Parity register #0 read */
 #define IGU_REG_IGU_PRTY_STS					 0x13009c
+/* [RC 11] Parity register #0 read clear */
+#define IGU_REG_IGU_PRTY_STS_CLR				 0x1300a0
 /* [R 4] Debug: int_handle_fsm */
 #define IGU_REG_INT_HANDLE_FSM					 0x130050
 #define IGU_REG_LEADING_EDGE_LATCH				 0x130134
@@ -1501,6 +1528,8 @@
 #define MISC_REG_MISC_PRTY_MASK 				 0xa398
 /* [R 1] Parity register #0 read */
 #define MISC_REG_MISC_PRTY_STS					 0xa38c
+/* [RC 1] Parity register #0 read clear */
+#define MISC_REG_MISC_PRTY_STS_CLR				 0xa390
 #define MISC_REG_NIG_WOL_P0					 0xa270
 #define MISC_REG_NIG_WOL_P1					 0xa274
 /* [R 1] If set indicate that the pcie_rst_b was asserted without perst
@@ -2082,6 +2111,10 @@
 #define PBF_REG_PBF_INT_MASK					 0x1401d4
 /* [R 5] Interrupt register #0 read */
 #define PBF_REG_PBF_INT_STS					 0x1401c8
+/* [RW 20] Parity mask register #0 read/write */
+#define PBF_REG_PBF_PRTY_MASK					 0x1401e4
+/* [RC 20] Parity register #0 read clear */
+#define PBF_REG_PBF_PRTY_STS_CLR				 0x1401dc
 #define PB_REG_CONTROL						 0
 /* [RW 2] Interrupt mask register #0 read/write */
 #define PB_REG_PB_INT_MASK					 0x28
@@ -2091,6 +2124,8 @@
 #define PB_REG_PB_PRTY_MASK					 0x38
 /* [R 4] Parity register #0 read */
 #define PB_REG_PB_PRTY_STS					 0x2c
+/* [RC 4] Parity register #0 read clear */
+#define PB_REG_PB_PRTY_STS_CLR					 0x30
 #define PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR		 (0x1<<0)
 #define PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW	 (0x1<<8)
 #define PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR	 (0x1<<1)
@@ -2446,6 +2481,8 @@
 #define PRS_REG_PRS_PRTY_MASK					 0x401a4
 /* [R 8] Parity register #0 read */
 #define PRS_REG_PRS_PRTY_STS					 0x40198
+/* [RC 8] Parity register #0 read clear */
+#define PRS_REG_PRS_PRTY_STS_CLR				 0x4019c
 /* [RW 8] Context region for pure acknowledge packets. Used in CFC load
    request message */
 #define PRS_REG_PURE_REGIONS					 0x40024
@@ -2599,6 +2636,9 @@
 /* [R 32] Parity register #0 read */
 #define PXP2_REG_PXP2_PRTY_STS_0				 0x12057c
 #define PXP2_REG_PXP2_PRTY_STS_1				 0x12058c
+/* [RC 32] Parity register #0 read clear */
+#define PXP2_REG_PXP2_PRTY_STS_CLR_0				 0x120580
+#define PXP2_REG_PXP2_PRTY_STS_CLR_1				 0x120590
 /* [R 1] Debug only: The 'almost full' indication from each fifo (gives
    indication about backpressure) */
 #define PXP2_REG_RD_ALMOST_FULL_0				 0x120424
@@ -3001,6 +3041,8 @@
 #define PXP_REG_PXP_PRTY_MASK					 0x103094
 /* [R 26] Parity register #0 read */
 #define PXP_REG_PXP_PRTY_STS					 0x103088
+/* [RC 27] Parity register #0 read clear */
+#define PXP_REG_PXP_PRTY_STS_CLR				 0x10308c
 /* [RW 4] The activity counter initial increment value sent in the load
    request */
 #define QM_REG_ACTCTRINITVAL_0					 0x168040
@@ -3157,6 +3199,8 @@
 #define QM_REG_QM_PRTY_MASK					 0x168454
 /* [R 12] Parity register #0 read */
 #define QM_REG_QM_PRTY_STS					 0x168448
+/* [RC 12] Parity register #0 read clear */
+#define QM_REG_QM_PRTY_STS_CLR					 0x16844c
 /* [R 32] Current queues in pipeline: Queues from 32 to 63 */
 #define QM_REG_QSTATUS_HIGH					 0x16802c
 /* [R 32] Current queues in pipeline: Queues from 96 to 127 */
@@ -3442,6 +3486,8 @@
 #define QM_REG_WRRWEIGHTS_9					 0x168848
 /* [R 6] Keep the fill level of the fifo from write client 1 */
 #define QM_REG_XQM_WRC_FIFOLVL					 0x168000
+/* [W 1] reset to parity interrupt */
+#define SEM_FAST_REG_PARITY_RST					 0x18840
 #define SRC_REG_COUNTFREE0					 0x40500
 /* [RW 1] If clr the searcher is compatible to E1 A0 - support only two
    ports. If set the searcher support 8 functions. */
@@ -3470,6 +3516,8 @@
 #define SRC_REG_SRC_PRTY_MASK					 0x404c8
 /* [R 3] Parity register #0 read */
 #define SRC_REG_SRC_PRTY_STS					 0x404bc
+/* [RC 3] Parity register #0 read clear */
+#define SRC_REG_SRC_PRTY_STS_CLR				 0x404c0
 /* [R 4] Used to read the value of the XX protection CAM occupancy counter. */
 #define TCM_REG_CAM_OCCUP					 0x5017c
 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
@@ -3596,8 +3644,12 @@
 #define TCM_REG_TCM_INT_MASK					 0x501dc
 /* [R 11] Interrupt register #0 read */
 #define TCM_REG_TCM_INT_STS					 0x501d0
+/* [RW 27] Parity mask register #0 read/write */
+#define TCM_REG_TCM_PRTY_MASK					 0x501ec
 /* [R 27] Parity register #0 read */
 #define TCM_REG_TCM_PRTY_STS					 0x501e0
+/* [RC 27] Parity register #0 read clear */
+#define TCM_REG_TCM_PRTY_STS_CLR				 0x501e4
 /* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
    REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
    Is used to determine the number of the AG context REG-pairs written back;
@@ -3755,6 +3807,10 @@
 #define TM_REG_TM_INT_MASK					 0x1640fc
 /* [R 1] Interrupt register #0 read */
 #define TM_REG_TM_INT_STS					 0x1640f0
+/* [RW 7] Parity mask register #0 read/write */
+#define TM_REG_TM_PRTY_MASK					 0x16410c
+/* [RC 7] Parity register #0 read clear */
+#define TM_REG_TM_PRTY_STS_CLR					 0x164104
 /* [RW 8] The event id for aggregated interrupt 0 */
 #define TSDM_REG_AGG_INT_EVENT_0				 0x42038
 #define TSDM_REG_AGG_INT_EVENT_1				 0x4203c
@@ -3835,6 +3891,8 @@
 #define TSDM_REG_TSDM_PRTY_MASK 				 0x422bc
 /* [R 11] Parity register #0 read */
 #define TSDM_REG_TSDM_PRTY_STS					 0x422b0
+/* [RC 11] Parity register #0 read clear */
+#define TSDM_REG_TSDM_PRTY_STS_CLR				 0x422b4
 /* [RW 5] The number of time_slots in the arbitration cycle */
 #define TSEM_REG_ARB_CYCLE_SIZE 				 0x180034
 /* [RW 3] The source that is associated with arbitration element 0. Source
@@ -3914,6 +3972,9 @@
 #define TSEM_REG_SLOW_EXT_STORE_EMPTY				 0x1802a0
 /* [RW 8] List of free threads . There is a bit per thread. */
 #define TSEM_REG_THREADS_LIST					 0x1802e4
+/* [RC 32] Parity register #0 read clear */
+#define TSEM_REG_TSEM_PRTY_STS_CLR_0				 0x180118
+#define TSEM_REG_TSEM_PRTY_STS_CLR_1				 0x180128
 /* [RW 3] The arbitration scheme of time_slot 0 */
 #define TSEM_REG_TS_0_AS					 0x180038
 /* [RW 3] The arbitration scheme of time_slot 10 */
@@ -4116,6 +4177,8 @@
 #define UCM_REG_UCM_INT_STS					 0xe01c8
 /* [R 27] Parity register #0 read */
 #define UCM_REG_UCM_PRTY_STS					 0xe01d8
+/* [RC 27] Parity register #0 read clear */
+#define UCM_REG_UCM_PRTY_STS_CLR				 0xe01dc
 /* [RW 2] The size of AG context region 0 in REG-pairs. Designates the MS
    REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
    Is used to determine the number of the AG context REG-pairs written back;
@@ -4292,6 +4355,8 @@
 #define USDM_REG_USDM_PRTY_MASK 				 0xc42c0
 /* [R 11] Parity register #0 read */
 #define USDM_REG_USDM_PRTY_STS					 0xc42b4
+/* [RC 11] Parity register #0 read clear */
+#define USDM_REG_USDM_PRTY_STS_CLR				 0xc42b8
 /* [RW 5] The number of time_slots in the arbitration cycle */
 #define USEM_REG_ARB_CYCLE_SIZE 				 0x300034
 /* [RW 3] The source that is associated with arbitration element 0. Source
@@ -4421,6 +4486,9 @@
 /* [R 32] Parity register #0 read */
 #define USEM_REG_USEM_PRTY_STS_0				 0x300124
 #define USEM_REG_USEM_PRTY_STS_1				 0x300134
+/* [RC 32] Parity register #0 read clear */
+#define USEM_REG_USEM_PRTY_STS_CLR_0				 0x300128
+#define USEM_REG_USEM_PRTY_STS_CLR_1				 0x300138
 /* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64
  * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */
 #define USEM_REG_VFPF_ERR_NUM					 0x300380
@@ -4797,6 +4865,8 @@
 #define XSDM_REG_XSDM_PRTY_MASK 				 0x1662bc
 /* [R 11] Parity register #0 read */
 #define XSDM_REG_XSDM_PRTY_STS					 0x1662b0
+/* [RC 11] Parity register #0 read clear */
+#define XSDM_REG_XSDM_PRTY_STS_CLR				 0x1662b4
 /* [RW 5] The number of time_slots in the arbitration cycle */
 #define XSEM_REG_ARB_CYCLE_SIZE 				 0x280034
 /* [RW 3] The source that is associated with arbitration element 0. Source
@@ -4929,6 +4999,9 @@
 /* [R 32] Parity register #0 read */
 #define XSEM_REG_XSEM_PRTY_STS_0				 0x280124
 #define XSEM_REG_XSEM_PRTY_STS_1				 0x280134
+/* [RC 32] Parity register #0 read clear */
+#define XSEM_REG_XSEM_PRTY_STS_CLR_0				 0x280128
+#define XSEM_REG_XSEM_PRTY_STS_CLR_1				 0x280138
 #define MCPR_NVM_ACCESS_ENABLE_EN				 (1L<<0)
 #define MCPR_NVM_ACCESS_ENABLE_WR_EN				 (1L<<1)
 #define MCPR_NVM_ADDR_NVM_ADDR_VALUE				 (0xffffffL<<0)
@@ -6316,3 +6389,4 @@ static inline u8 calc_crc8(u32 data, u8 crc)
 }
 
 
+#endif /* BNX2X_REG_H */