Merge branch 'serial-from-alan'

* serial-from-alan: (79 commits)
  moxa: prevent opening unavailable ports
  imx: serial: use tty_encode_baud_rate to set true rate
  imx: serial: add IrDA support to serial driver
  imx: serial: use rational library function
  lib: isolate rational fractions helper function
  imx: serial: handle initialisation failure correctly
  imx: serial: be sure to stop xmit upon shutdown
  imx: serial: notify higher layers in case xmit IRQ was not called
  imx: serial: fix one bit field type
  imx: serial: fix whitespaces (no changes in functionality)
  tty: use prepare/finish_wait
  tty: remove sleep_on
  sierra: driver interface blacklisting
  sierra: driver urb handling improvements
  tty: resolve some sierra breakage
  timbuart: Fix the termios logic
  serial: Added Timberdale UART driver
  tty: Add URL for ttydev queue
  devpts: unregister the file system on error
  tty: Untangle termios and mm mutex dependencies
  ...

MAINTAINERS

@@ -71,7 +71,7 @@ P: Person
 M: Mail patches to
 L: Mailing list that is relevant to this area
 W: Web-page with status/info
-T: SCM tree type and location.  Type is one of: git, hg, quilt.
+T: SCM tree type and location.  Type is one of: git, hg, quilt, stgit.
 S: Status, one of the following:
 
 	Supported:	Someone is actually paid to look after this.
@@ -159,7 +159,8 @@ F:	drivers/net/r8169.c
 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
 L:	linux-serial@vger.kernel.org
 W:	http://serial.sourceforge.net
-S:	Orphan
+M:	alan@lxorguk.ukuu.org.uk
+S:	Odd Fixes
 F:	drivers/serial/8250*
 F:	include/linux/serial_8250.h
 
@@ -5629,6 +5630,7 @@ P:	Alan Cox
 M:	alan@lxorguk.ukuu.org.uk
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
+T:	stgit http://zeniv.linux.org.uk/~alan/ttydev/
 
 TULIP NETWORK DRIVERS
 P:	Grant Grundler

arch/arm/plat-mxc/include/mach/imx-uart.h

@@ -20,11 +20,16 @@
 #define ASMARM_ARCH_UART_H
 
 #define IMXUART_HAVE_RTSCTS (1<<0)
+#define IMXUART_IRDA        (1<<1)
 
 struct imxuart_platform_data {
 	int (*init)(struct platform_device *pdev);
 	int (*exit)(struct platform_device *pdev);
 	unsigned int flags;
+	void (*irda_enable)(int enable);
+	unsigned int irda_inv_rx:1;
+	unsigned int irda_inv_tx:1;
+	unsigned short transceiver_delay;
 };
 
 #endif

arch/x86/include/asm/termios.h

@@ -67,6 +67,7 @@ static inline int user_termio_to_kernel_termios(struct ktermios *termios,
 	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag);
 	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag);
 	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag);
+	get_user(termios->c_line, &termio->c_line);
 	return copy_from_user(termios->c_cc, termio->c_cc, NCC);
 }
 

drivers/bluetooth/hci_ldisc.c

@@ -277,8 +277,8 @@ static int hci_uart_tty_open(struct tty_struct *tty)
 	/* FIXME: why is this needed. Note don't use ldisc_ref here as the
 	   open path is before the ldisc is referencable */
 
-	if (tty->ldisc.ops->flush_buffer)
-		tty->ldisc.ops->flush_buffer(tty);
+	if (tty->ldisc->ops->flush_buffer)
+		tty->ldisc->ops->flush_buffer(tty);
 	tty_driver_flush_buffer(tty);
 
 	return 0;
@@ -463,7 +463,6 @@ static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file,
 				clear_bit(HCI_UART_PROTO_SET, &hu->flags);
 				return err;
 			}
-			tty->low_latency = 1;
 		} else
 			return -EBUSY;
 		break;

drivers/char/Kconfig

@@ -97,6 +97,19 @@ config DEVKMEM
 	  kind of kernel debugging operations.
 	  When in doubt, say "N".
 
+config BFIN_JTAG_COMM
+	tristate "Blackfin JTAG Communication"
+	depends on BLACKFIN
+	help
+	  Add support for emulating a TTY device over the Blackfin JTAG.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bfin_jtag_comm.
+
+config BFIN_JTAG_COMM_CONSOLE
+	bool "Console on Blackfin JTAG"
+	depends on BFIN_JTAG_COMM=y
+
 config SERIAL_NONSTANDARD
 	bool "Non-standard serial port support"
 	depends on HAS_IOMEM

drivers/char/Makefile

@@ -13,6 +13,7 @@ obj-$(CONFIG_LEGACY_PTYS)	+= pty.o
 obj-$(CONFIG_UNIX98_PTYS)	+= pty.o
 obj-y				+= misc.o
 obj-$(CONFIG_VT)		+= vt_ioctl.o vc_screen.o selection.o keyboard.o
+obj-$(CONFIG_BFIN_JTAG_COMM)	+= bfin_jtag_comm.o
 obj-$(CONFIG_CONSOLE_TRANSLATIONS) += consolemap.o consolemap_deftbl.o
 obj-$(CONFIG_HW_CONSOLE)	+= vt.o defkeymap.o
 obj-$(CONFIG_AUDIT)		+= tty_audit.o

drivers/char/bfin_jtag_comm.c

@@ -0,0 +1,365 @@
+/*
+ * TTY over Blackfin JTAG Communication
+ *
+ * Copyright 2008-2009 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/circ_buf.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <asm/atomic.h>
+
+/* See the Debug/Emulation chapter in the HRM */
+#define EMUDOF   0x00000001	/* EMUDAT_OUT full & valid */
+#define EMUDIF   0x00000002	/* EMUDAT_IN full & valid */
+#define EMUDOOVF 0x00000004	/* EMUDAT_OUT overflow */
+#define EMUDIOVF 0x00000008	/* EMUDAT_IN overflow */
+
+#define DRV_NAME "bfin-jtag-comm"
+#define DEV_NAME "ttyBFJC"
+
+#define pr_init(fmt, args...) ({ static const __initdata char __fmt[] = fmt; printk(__fmt, ## args); })
+#define debug(fmt, args...) pr_debug(DRV_NAME ": " fmt, ## args)
+
+static inline uint32_t bfin_write_emudat(uint32_t emudat)
+{
+	__asm__ __volatile__("emudat = %0;" : : "d"(emudat));
+	return emudat;
+}
+
+static inline uint32_t bfin_read_emudat(void)
+{
+	uint32_t emudat;
+	__asm__ __volatile__("%0 = emudat;" : "=d"(emudat));
+	return emudat;
+}
+
+static inline uint32_t bfin_write_emudat_chars(char a, char b, char c, char d)
+{
+	return bfin_write_emudat((a << 0) | (b << 8) | (c << 16) | (d << 24));
+}
+
+#define CIRC_SIZE 2048	/* see comment in tty_io.c:do_tty_write() */
+#define CIRC_MASK (CIRC_SIZE - 1)
+#define circ_empty(circ)     ((circ)->head == (circ)->tail)
+#define circ_free(circ)      CIRC_SPACE((circ)->head, (circ)->tail, CIRC_SIZE)
+#define circ_cnt(circ)       CIRC_CNT((circ)->head, (circ)->tail, CIRC_SIZE)
+#define circ_byte(circ, idx) ((circ)->buf[(idx) & CIRC_MASK])
+
+static struct tty_driver *bfin_jc_driver;
+static struct task_struct *bfin_jc_kthread;
+static struct tty_struct * volatile bfin_jc_tty;
+static unsigned long bfin_jc_count;
+static DEFINE_MUTEX(bfin_jc_tty_mutex);
+static volatile struct circ_buf bfin_jc_write_buf;
+
+static int
+bfin_jc_emudat_manager(void *arg)
+{
+	uint32_t inbound_len = 0, outbound_len = 0;
+
+	while (!kthread_should_stop()) {
+		/* no one left to give data to, so sleep */
+		if (bfin_jc_tty == NULL && circ_empty(&bfin_jc_write_buf)) {
+			debug("waiting for readers\n");
+			__set_current_state(TASK_UNINTERRUPTIBLE);
+			schedule();
+			__set_current_state(TASK_RUNNING);
+		}
+
+		/* no data available, so just chill */
+		if (!(bfin_read_DBGSTAT() & EMUDIF) && circ_empty(&bfin_jc_write_buf)) {
+			debug("waiting for data (in_len = %i) (circ: %i %i)\n",
+				inbound_len, bfin_jc_write_buf.tail, bfin_jc_write_buf.head);
+			if (inbound_len)
+				schedule();
+			else
+				schedule_timeout_interruptible(HZ);
+			continue;
+		}
+
+		/* if incoming data is ready, eat it */
+		if (bfin_read_DBGSTAT() & EMUDIF) {
+			struct tty_struct *tty;
+			mutex_lock(&bfin_jc_tty_mutex);
+			tty = (struct tty_struct *)bfin_jc_tty;
+			if (tty != NULL) {
+				uint32_t emudat = bfin_read_emudat();
+				if (inbound_len == 0) {
+					debug("incoming length: 0x%08x\n", emudat);
+					inbound_len = emudat;
+				} else {
+					size_t num_chars = (4 <= inbound_len ? 4 : inbound_len);
+					debug("  incoming data: 0x%08x (pushing %zu)\n", emudat, num_chars);
+					inbound_len -= num_chars;
+					tty_insert_flip_string(tty, (unsigned char *)&emudat, num_chars);
+					tty_flip_buffer_push(tty);
+				}
+			}
+			mutex_unlock(&bfin_jc_tty_mutex);
+		}
+
+		/* if outgoing data is ready, post it */
+		if (!(bfin_read_DBGSTAT() & EMUDOF) && !circ_empty(&bfin_jc_write_buf)) {
+			if (outbound_len == 0) {
+				outbound_len = circ_cnt(&bfin_jc_write_buf);
+				bfin_write_emudat(outbound_len);
+				debug("outgoing length: 0x%08x\n", outbound_len);
+			} else {
+				struct tty_struct *tty;
+				int tail = bfin_jc_write_buf.tail;
+				size_t ate = (4 <= outbound_len ? 4 : outbound_len);
+				uint32_t emudat =
+				bfin_write_emudat_chars(
+					circ_byte(&bfin_jc_write_buf, tail + 0),
+					circ_byte(&bfin_jc_write_buf, tail + 1),
+					circ_byte(&bfin_jc_write_buf, tail + 2),
+					circ_byte(&bfin_jc_write_buf, tail + 3)
+				);
+				bfin_jc_write_buf.tail += ate;
+				outbound_len -= ate;
+				mutex_lock(&bfin_jc_tty_mutex);
+				tty = (struct tty_struct *)bfin_jc_tty;
+				if (tty)
+					tty_wakeup(tty);
+				mutex_unlock(&bfin_jc_tty_mutex);
+				debug("  outgoing data: 0x%08x (pushing %zu)\n", emudat, ate);
+			}
+		}
+	}
+
+	__set_current_state(TASK_RUNNING);
+	return 0;
+}
+
+static int
+bfin_jc_open(struct tty_struct *tty, struct file *filp)
+{
+	mutex_lock(&bfin_jc_tty_mutex);
+	debug("open %lu\n", bfin_jc_count);
+	++bfin_jc_count;
+	bfin_jc_tty = tty;
+	wake_up_process(bfin_jc_kthread);
+	mutex_unlock(&bfin_jc_tty_mutex);
+	return 0;
+}
+
+static void
+bfin_jc_close(struct tty_struct *tty, struct file *filp)
+{
+	mutex_lock(&bfin_jc_tty_mutex);
+	debug("close %lu\n", bfin_jc_count);
+	if (--bfin_jc_count == 0)
+		bfin_jc_tty = NULL;
+	wake_up_process(bfin_jc_kthread);
+	mutex_unlock(&bfin_jc_tty_mutex);
+}
+
+/* XXX: we dont handle the put_char() case where we must handle count = 1 */
+static int
+bfin_jc_circ_write(const unsigned char *buf, int count)
+{
+	int i;
+	count = min(count, circ_free(&bfin_jc_write_buf));
+	debug("going to write chunk of %i bytes\n", count);
+	for (i = 0; i < count; ++i)
+		circ_byte(&bfin_jc_write_buf, bfin_jc_write_buf.head + i) = buf[i];
+	bfin_jc_write_buf.head += i;
+	return i;
+}
+
+#ifndef CONFIG_BFIN_JTAG_COMM_CONSOLE
+# define acquire_console_sem()
+# define release_console_sem()
+#endif
+static int
+bfin_jc_write(struct tty_struct *tty, const unsigned char *buf, int count)
+{
+	int i;
+	acquire_console_sem();
+	i = bfin_jc_circ_write(buf, count);
+	release_console_sem();
+	wake_up_process(bfin_jc_kthread);
+	return i;
+}
+
+static void
+bfin_jc_flush_chars(struct tty_struct *tty)
+{
+	wake_up_process(bfin_jc_kthread);
+}
+
+static int
+bfin_jc_write_room(struct tty_struct *tty)
+{
+	return circ_free(&bfin_jc_write_buf);
+}
+
+static int
+bfin_jc_chars_in_buffer(struct tty_struct *tty)
+{
+	return circ_cnt(&bfin_jc_write_buf);
+}
+
+static void
+bfin_jc_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+	unsigned long expire = jiffies + timeout;
+	while (!circ_empty(&bfin_jc_write_buf)) {
+		if (signal_pending(current))
+			break;
+		if (time_after(jiffies, expire))
+			break;
+	}
+}
+
+static struct tty_operations bfin_jc_ops = {
+	.open            = bfin_jc_open,
+	.close           = bfin_jc_close,
+	.write           = bfin_jc_write,
+	/*.put_char        = bfin_jc_put_char,*/
+	.flush_chars     = bfin_jc_flush_chars,
+	.write_room      = bfin_jc_write_room,
+	.chars_in_buffer = bfin_jc_chars_in_buffer,
+	.wait_until_sent = bfin_jc_wait_until_sent,
+};
+
+static int __init bfin_jc_init(void)
+{
+	int ret;
+
+	bfin_jc_kthread = kthread_create(bfin_jc_emudat_manager, NULL, DRV_NAME);
+	if (IS_ERR(bfin_jc_kthread))
+		return PTR_ERR(bfin_jc_kthread);
+
+	ret = -ENOMEM;
+
+	bfin_jc_write_buf.head = bfin_jc_write_buf.tail = 0;
+	bfin_jc_write_buf.buf = kmalloc(CIRC_SIZE, GFP_KERNEL);
+	if (!bfin_jc_write_buf.buf)
+		goto err;
+
+	bfin_jc_driver = alloc_tty_driver(1);
+	if (!bfin_jc_driver)
+		goto err;
+
+	bfin_jc_driver->owner        = THIS_MODULE;
+	bfin_jc_driver->driver_name  = DRV_NAME;
+	bfin_jc_driver->name         = DEV_NAME;
+	bfin_jc_driver->type         = TTY_DRIVER_TYPE_SERIAL;
+	bfin_jc_driver->subtype      = SERIAL_TYPE_NORMAL;
+	bfin_jc_driver->init_termios = tty_std_termios;
+	tty_set_operations(bfin_jc_driver, &bfin_jc_ops);
+
+	ret = tty_register_driver(bfin_jc_driver);
+	if (ret)
+		goto err;
+
+	pr_init(KERN_INFO DRV_NAME ": initialized\n");
+
+	return 0;
+
+ err:
+	put_tty_driver(bfin_jc_driver);
+	kfree(bfin_jc_write_buf.buf);
+	kthread_stop(bfin_jc_kthread);
+	return ret;
+}
+module_init(bfin_jc_init);
+
+static void __exit bfin_jc_exit(void)
+{
+	kthread_stop(bfin_jc_kthread);
+	kfree(bfin_jc_write_buf.buf);
+	tty_unregister_driver(bfin_jc_driver);
+	put_tty_driver(bfin_jc_driver);
+}
+module_exit(bfin_jc_exit);
+
+#if defined(CONFIG_BFIN_JTAG_COMM_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+static void
+bfin_jc_straight_buffer_write(const char *buf, unsigned count)
+{
+	unsigned ate = 0;
+	while (bfin_read_DBGSTAT() & EMUDOF)
+		continue;
+	bfin_write_emudat(count);
+	while (ate < count) {
+		while (bfin_read_DBGSTAT() & EMUDOF)
+			continue;
+		bfin_write_emudat_chars(buf[ate], buf[ate+1], buf[ate+2], buf[ate+3]);
+		ate += 4;
+	}
+}
+#endif
+
+#ifdef CONFIG_BFIN_JTAG_COMM_CONSOLE
+static void
+bfin_jc_console_write(struct console *co, const char *buf, unsigned count)
+{
+	if (bfin_jc_kthread == NULL)
+		bfin_jc_straight_buffer_write(buf, count);
+	else
+		bfin_jc_circ_write(buf, count);
+}
+
+static struct tty_driver *
+bfin_jc_console_device(struct console *co, int *index)
+{
+	*index = co->index;
+	return bfin_jc_driver;
+}
+
+static struct console bfin_jc_console = {
+	.name    = DEV_NAME,
+	.write   = bfin_jc_console_write,
+	.device  = bfin_jc_console_device,
+	.flags   = CON_ANYTIME | CON_PRINTBUFFER,
+	.index   = -1,
+};
+
+static int __init bfin_jc_console_init(void)
+{
+	register_console(&bfin_jc_console);
+	return 0;
+}
+console_initcall(bfin_jc_console_init);
+#endif
+
+#ifdef CONFIG_EARLY_PRINTK
+static void __init
+bfin_jc_early_write(struct console *co, const char *buf, unsigned int count)
+{
+	bfin_jc_straight_buffer_write(buf, count);
+}
+
+static struct __initdata console bfin_jc_early_console = {
+	.name   = "early_BFJC",
+	.write   = bfin_jc_early_write,
+	.flags   = CON_ANYTIME | CON_PRINTBUFFER,
+	.index   = -1,
+};
+
+struct console * __init
+bfin_jc_early_init(unsigned int port, unsigned int cflag)
+{
+	return &bfin_jc_early_console;
+}
+#endif
+
+MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
+MODULE_DESCRIPTION("TTY over Blackfin JTAG Communication");
+MODULE_LICENSE("GPL");

drivers/char/cyclades.c

@@ -604,7 +604,6 @@
 
 #define NR_PORTS	256
 
-#define ZE_V1_NPORTS	64
 #define ZO_V1	0
 #define ZO_V2	1
 #define ZE_V1	2
@@ -663,18 +662,6 @@
 static void cy_throttle(struct tty_struct *tty);
 static void cy_send_xchar(struct tty_struct *tty, char ch);
 
-#define IS_CYC_Z(card) ((card).num_chips == (unsigned int)-1)
-
-#define Z_FPGA_CHECK(card) \
-	((readl(&((struct RUNTIME_9060 __iomem *) \
-		((card).ctl_addr))->init_ctrl) & (1<<17)) != 0)
-
-#define ISZLOADED(card)	(((ZO_V1 == readl(&((struct RUNTIME_9060 __iomem *) \
-			((card).ctl_addr))->mail_box_0)) || \
-			Z_FPGA_CHECK(card)) && \
-			(ZFIRM_ID == readl(&((struct FIRM_ID __iomem *) \
-			((card).base_addr+ID_ADDRESS))->signature)))
-
 #ifndef SERIAL_XMIT_SIZE
 #define	SERIAL_XMIT_SIZE	(min(PAGE_SIZE, 4096))
 #endif
@@ -687,8 +674,6 @@ static void cy_send_xchar(struct tty_struct *tty, char ch);
 #define DRIVER_VERSION	0x02010203
 #define RAM_SIZE 0x80000
 
-#define Z_FPGA_LOADED(X)	((readl(&(X)->init_ctrl) & (1<<17)) != 0)
-
 enum zblock_type {
 	ZBLOCK_PRG = 0,
 	ZBLOCK_FPGA = 1
@@ -883,6 +868,29 @@ static void cyz_rx_restart(unsigned long);
 static struct timer_list cyz_rx_full_timer[NR_PORTS];
 #endif				/* CONFIG_CYZ_INTR */
 
+static inline bool cy_is_Z(struct cyclades_card *card)
+{
+	return card->num_chips == (unsigned int)-1;
+}
+
+static inline bool __cyz_fpga_loaded(struct RUNTIME_9060 __iomem *ctl_addr)
+{
+	return readl(&ctl_addr->init_ctrl) & (1 << 17);
+}
+
+static inline bool cyz_fpga_loaded(struct cyclades_card *card)
+{
+	return __cyz_fpga_loaded(card->ctl_addr.p9060);
+}
+
+static inline bool cyz_is_loaded(struct cyclades_card *card)
+{
+	struct FIRM_ID __iomem *fw_id = card->base_addr + ID_ADDRESS;
+
+	return (card->hw_ver == ZO_V1 || cyz_fpga_loaded(card)) &&
+			readl(&fw_id->signature) == ZFIRM_ID;
+}
+
 static inline int serial_paranoia_check(struct cyclades_port *info,
 		char *name, const char *routine)
 {
@@ -1395,19 +1403,15 @@ cyz_fetch_msg(struct cyclades_card *cinfo,
 	unsigned long loc_doorbell;
 
 	firm_id = cinfo->base_addr + ID_ADDRESS;
-	if (!ISZLOADED(*cinfo))
-		return -1;
 	zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
 	board_ctrl = &zfw_ctrl->board_ctrl;
 
-	loc_doorbell = readl(&((struct RUNTIME_9060 __iomem *)
-				  (cinfo->ctl_addr))->loc_doorbell);
+	loc_doorbell = readl(&cinfo->ctl_addr.p9060->loc_doorbell);
 	if (loc_doorbell) {
 		*cmd = (char)(0xff & loc_doorbell);
 		*channel = readl(&board_ctrl->fwcmd_channel);
 		*param = (__u32) readl(&board_ctrl->fwcmd_param);
-		cy_writel(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->
-			  loc_doorbell, 0xffffffff);
+		cy_writel(&cinfo->ctl_addr.p9060->loc_doorbell, 0xffffffff);
 		return 1;
 	}
 	return 0;
@@ -1424,15 +1428,14 @@ cyz_issue_cmd(struct cyclades_card *cinfo,
 	unsigned int index;
 
 	firm_id = cinfo->base_addr + ID_ADDRESS;
-	if (!ISZLOADED(*cinfo))
+	if (!cyz_is_loaded(cinfo))
 		return -1;
 
 	zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
 	board_ctrl = &zfw_ctrl->board_ctrl;
 
 	index = 0;
-	pci_doorbell =
-	    &((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->pci_doorbell;
+	pci_doorbell = &cinfo->ctl_addr.p9060->pci_doorbell;
 	while ((readl(pci_doorbell) & 0xff) != 0) {
 		if (index++ == 1000)
 			return (int)(readl(pci_doorbell) & 0xff);
@@ -1624,10 +1627,8 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 	static struct BOARD_CTRL __iomem *board_ctrl;
 	static struct CH_CTRL __iomem *ch_ctrl;
 	static struct BUF_CTRL __iomem *buf_ctrl;
-	__u32 channel;
+	__u32 channel, param, fw_ver;
 	__u8 cmd;
-	__u32 param;
-	__u32 hw_ver, fw_ver;
 	int special_count;
 	int delta_count;
 
@@ -1635,8 +1636,6 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 	zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
 	board_ctrl = &zfw_ctrl->board_ctrl;
 	fw_ver = readl(&board_ctrl->fw_version);
-	hw_ver = readl(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->
-			mail_box_0);
 
 	while (cyz_fetch_msg(cinfo, &channel, &cmd, &param) == 1) {
 		special_count = 0;
@@ -1737,15 +1736,7 @@ static irqreturn_t cyz_interrupt(int irq, void *dev_id)
 {
 	struct cyclades_card *cinfo = dev_id;
 
-	if (unlikely(cinfo == NULL)) {
-#ifdef CY_DEBUG_INTERRUPTS
-		printk(KERN_DEBUG "cyz_interrupt: spurious interrupt %d\n",
-									irq);
-#endif
-		return IRQ_NONE;	/* spurious interrupt */
-	}
-
-	if (unlikely(!ISZLOADED(*cinfo))) {
+	if (unlikely(!cyz_is_loaded(cinfo))) {
 #ifdef CY_DEBUG_INTERRUPTS
 		printk(KERN_DEBUG "cyz_interrupt: board not yet loaded "
 				"(IRQ%d).\n", irq);
@@ -1785,7 +1776,6 @@ static void cyz_poll(unsigned long arg)
 	struct tty_struct *tty;
 	struct FIRM_ID __iomem *firm_id;
 	struct ZFW_CTRL __iomem *zfw_ctrl;
-	struct BOARD_CTRL __iomem *board_ctrl;
 	struct BUF_CTRL __iomem *buf_ctrl;
 	unsigned long expires = jiffies + HZ;
 	unsigned int port, card;
@@ -1793,19 +1783,17 @@ static void cyz_poll(unsigned long arg)
 	for (card = 0; card < NR_CARDS; card++) {
 		cinfo = &cy_card[card];
 
-		if (!IS_CYC_Z(*cinfo))
+		if (!cy_is_Z(cinfo))
 			continue;
-		if (!ISZLOADED(*cinfo))
+		if (!cyz_is_loaded(cinfo))
 			continue;
 
 		firm_id = cinfo->base_addr + ID_ADDRESS;
 		zfw_ctrl = cinfo->base_addr +
 				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-		board_ctrl = &(zfw_ctrl->board_ctrl);
 
 	/* Skip first polling cycle to avoid racing conditions with the FW */
 		if (!cinfo->intr_enabled) {
-			cinfo->nports = (int)readl(&board_ctrl->n_channel);
 			cinfo->intr_enabled = 1;
 			continue;
 		}
@@ -1874,7 +1862,7 @@ static int startup(struct cyclades_port *info)
 
 	set_line_char(info);
 
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = card->bus_index;
@@ -1931,7 +1919,7 @@ static int startup(struct cyclades_port *info)
 		base_addr = card->base_addr;
 
 		firm_id = base_addr + ID_ADDRESS;
-		if (!ISZLOADED(*card))
+		if (!cyz_is_loaded(card))
 			return -ENODEV;
 
 		zfw_ctrl = card->base_addr +
@@ -2026,7 +2014,7 @@ static void start_xmit(struct cyclades_port *info)
 
 	card = info->card;
 	channel = info->line - card->first_line;
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = card->bus_index;
@@ -2070,7 +2058,7 @@ static void shutdown(struct cyclades_port *info)
 
 	card = info->card;
 	channel = info->line - card->first_line;
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = card->bus_index;
@@ -2126,7 +2114,7 @@ static void shutdown(struct cyclades_port *info)
 #endif
 
 		firm_id = base_addr + ID_ADDRESS;
-		if (!ISZLOADED(*card))
+		if (!cyz_is_loaded(card))
 			return;
 
 		zfw_ctrl = card->base_addr +
@@ -2233,7 +2221,7 @@ block_til_ready(struct tty_struct *tty, struct file *filp,
 #endif
 	info->port.blocked_open++;
 
-	if (!IS_CYC_Z(*cinfo)) {
+	if (!cy_is_Z(cinfo)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = cinfo->bus_index;
@@ -2296,7 +2284,7 @@ block_til_ready(struct tty_struct *tty, struct file *filp,
 
 		base_addr = cinfo->base_addr;
 		firm_id = base_addr + ID_ADDRESS;
-		if (!ISZLOADED(*cinfo)) {
+		if (!cyz_is_loaded(cinfo)) {
 			__set_current_state(TASK_RUNNING);
 			remove_wait_queue(&info->port.open_wait, &wait);
 			return -EINVAL;
@@ -2397,16 +2385,14 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
 	   treat it as absent from the system.  This
 	   will make the user pay attention.
 	 */
-	if (IS_CYC_Z(*info->card)) {
+	if (cy_is_Z(info->card)) {
 		struct cyclades_card *cinfo = info->card;
 		struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS;
 
-		if (!ISZLOADED(*cinfo)) {
-			if (((ZE_V1 == readl(&((struct RUNTIME_9060 __iomem *)
-					 (cinfo->ctl_addr))->mail_box_0)) &&
-					Z_FPGA_CHECK(*cinfo)) &&
-					(ZFIRM_HLT == readl(
-						&firm_id->signature))) {
+		if (!cyz_is_loaded(cinfo)) {
+			if (cinfo->hw_ver == ZE_V1 && cyz_fpga_loaded(cinfo) &&
+					readl(&firm_id->signature) ==
+					ZFIRM_HLT) {
 				printk(KERN_ERR "cyc:Cyclades-Z Error: you "
 					"need an external power supply for "
 					"this number of ports.\nFirmware "
@@ -2423,18 +2409,13 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
 		   interrupts should be enabled as soon as the first open
 		   happens to one of its ports. */
 			if (!cinfo->intr_enabled) {
-				struct ZFW_CTRL __iomem *zfw_ctrl;
-				struct BOARD_CTRL __iomem *board_ctrl;
-
-				zfw_ctrl = cinfo->base_addr +
-					(readl(&firm_id->zfwctrl_addr) &
-					 0xfffff);
-
-				board_ctrl = &zfw_ctrl->board_ctrl;
+				u16 intr;
 
 				/* Enable interrupts on the PLX chip */
-				cy_writew(cinfo->ctl_addr + 0x68,
-					readw(cinfo->ctl_addr + 0x68) | 0x0900);
+				intr = readw(&cinfo->ctl_addr.p9060->
+						intr_ctrl_stat) | 0x0900;
+				cy_writew(&cinfo->ctl_addr.p9060->
+						intr_ctrl_stat, intr);
 				/* Enable interrupts on the FW */
 				retval = cyz_issue_cmd(cinfo, 0,
 						C_CM_IRQ_ENBL, 0L);
@@ -2442,8 +2423,6 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
 					printk(KERN_ERR "cyc:IRQ enable retval "
 						"was %x\n", retval);
 				}
-				cinfo->nports =
-					(int)readl(&board_ctrl->n_channel);
 				cinfo->intr_enabled = 1;
 			}
 		}
@@ -2556,7 +2535,7 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
 #endif
 	card = info->card;
 	channel = (info->line) - (card->first_line);
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = card->bus_index;
@@ -2601,7 +2580,7 @@ static void cy_flush_buffer(struct tty_struct *tty)
 	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
 	spin_unlock_irqrestore(&card->card_lock, flags);
 
-	if (IS_CYC_Z(*card)) {	/* If it is a Z card, flush the on-board
+	if (cy_is_Z(card)) {	/* If it is a Z card, flush the on-board
 					   buffers as well */
 		spin_lock_irqsave(&card->card_lock, flags);
 		retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_TX, 0L);
@@ -2682,7 +2661,7 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
 
 	spin_lock_irqsave(&card->card_lock, flags);
 
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		int channel = info->line - card->first_line;
 		int index = card->bus_index;
 		void __iomem *base_addr = card->base_addr +
@@ -2902,7 +2881,7 @@ static int cy_chars_in_buffer(struct tty_struct *tty)
 	channel = (info->line) - (card->first_line);
 
 #ifdef Z_EXT_CHARS_IN_BUFFER
-	if (!IS_CYC_Z(cy_card[card])) {
+	if (!cy_is_Z(card)) {
 #endif				/* Z_EXT_CHARS_IN_BUFFER */
 #ifdef CY_DEBUG_IO
 		printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n",
@@ -2984,7 +2963,6 @@ static void set_line_char(struct cyclades_port *info)
 	void __iomem *base_addr;
 	int chip, channel, index;
 	unsigned cflag, iflag;
-	unsigned short chip_number;
 	int baud, baud_rate = 0;
 	int i;
 
@@ -3013,9 +2991,8 @@ static void set_line_char(struct cyclades_port *info)
 
 	card = info->card;
 	channel = info->line - card->first_line;
-	chip_number = channel / 4;
 
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 
 		index = card->bus_index;
 
@@ -3233,21 +3210,17 @@ static void set_line_char(struct cyclades_port *info)
 	} else {
 		struct FIRM_ID __iomem *firm_id;
 		struct ZFW_CTRL __iomem *zfw_ctrl;
-		struct BOARD_CTRL __iomem *board_ctrl;
 		struct CH_CTRL __iomem *ch_ctrl;
-		struct BUF_CTRL __iomem *buf_ctrl;
 		__u32 sw_flow;
 		int retval;
 
 		firm_id = card->base_addr + ID_ADDRESS;
-		if (!ISZLOADED(*card))
+		if (!cyz_is_loaded(card))
 			return;
 
 		zfw_ctrl = card->base_addr +
 			(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-		board_ctrl = &zfw_ctrl->board_ctrl;
 		ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
-		buf_ctrl = &zfw_ctrl->buf_ctrl[channel];
 
 		/* baud rate */
 		baud = tty_get_baud_rate(info->port.tty);
@@ -3457,7 +3430,7 @@ static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value)
 
 	card = info->card;
 	channel = (info->line) - (card->first_line);
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = card->bus_index;
@@ -3497,7 +3470,7 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file)
 
 	card = info->card;
 	channel = info->line - card->first_line;
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = card->bus_index;
@@ -3523,7 +3496,7 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file)
 	} else {
 		base_addr = card->base_addr;
 		firm_id = card->base_addr + ID_ADDRESS;
-		if (ISZLOADED(*card)) {
+		if (cyz_is_loaded(card)) {
 			zfw_ctrl = card->base_addr +
 				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
 			board_ctrl = &zfw_ctrl->board_ctrl;
@@ -3566,7 +3539,7 @@ cy_tiocmset(struct tty_struct *tty, struct file *file,
 
 	card = info->card;
 	channel = (info->line) - (card->first_line);
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = card->bus_index;
@@ -3641,7 +3614,7 @@ cy_tiocmset(struct tty_struct *tty, struct file *file,
 		base_addr = card->base_addr;
 
 		firm_id = card->base_addr + ID_ADDRESS;
-		if (ISZLOADED(*card)) {
+		if (cyz_is_loaded(card)) {
 			zfw_ctrl = card->base_addr +
 				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
 			board_ctrl = &zfw_ctrl->board_ctrl;
@@ -3713,7 +3686,7 @@ static int cy_break(struct tty_struct *tty, int break_state)
 	card = info->card;
 
 	spin_lock_irqsave(&card->card_lock, flags);
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		/* Let the transmit ISR take care of this (since it
 		   requires stuffing characters into the output stream).
 		 */
@@ -3782,7 +3755,7 @@ static int set_threshold(struct cyclades_port *info, unsigned long value)
 
 	card = info->card;
 	channel = info->line - card->first_line;
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = card->bus_index;
@@ -3810,7 +3783,7 @@ static int get_threshold(struct cyclades_port *info,
 
 	card = info->card;
 	channel = info->line - card->first_line;
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = card->bus_index;
@@ -3844,7 +3817,7 @@ static int set_timeout(struct cyclades_port *info, unsigned long value)
 
 	card = info->card;
 	channel = info->line - card->first_line;
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = card->bus_index;
@@ -3867,7 +3840,7 @@ static int get_timeout(struct cyclades_port *info,
 
 	card = info->card;
 	channel = info->line - card->first_line;
-	if (!IS_CYC_Z(*card)) {
+	if (!cy_is_Z(card)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		index = card->bus_index;
@@ -4121,7 +4094,7 @@ static void cy_send_xchar(struct tty_struct *tty, char ch)
 	card = info->card;
 	channel = info->line - card->first_line;
 
-	if (IS_CYC_Z(*card)) {
+	if (cy_is_Z(card)) {
 		if (ch == STOP_CHAR(tty))
 			cyz_issue_cmd(card, channel, C_CM_SENDXOFF, 0L);
 		else if (ch == START_CHAR(tty))
@@ -4154,7 +4127,7 @@ static void cy_throttle(struct tty_struct *tty)
 	card = info->card;
 
 	if (I_IXOFF(tty)) {
-		if (!IS_CYC_Z(*card))
+		if (!cy_is_Z(card))
 			cy_send_xchar(tty, STOP_CHAR(tty));
 		else
 			info->throttle = 1;
@@ -4162,7 +4135,7 @@ static void cy_throttle(struct tty_struct *tty)
 
 	if (tty->termios->c_cflag & CRTSCTS) {
 		channel = info->line - card->first_line;
-		if (!IS_CYC_Z(*card)) {
+		if (!cy_is_Z(card)) {
 			chip = channel >> 2;
 			channel &= 0x03;
 			index = card->bus_index;
@@ -4219,7 +4192,7 @@ static void cy_unthrottle(struct tty_struct *tty)
 	if (tty->termios->c_cflag & CRTSCTS) {
 		card = info->card;
 		channel = info->line - card->first_line;
-		if (!IS_CYC_Z(*card)) {
+		if (!cy_is_Z(card)) {
 			chip = channel >> 2;
 			channel &= 0x03;
 			index = card->bus_index;
@@ -4263,7 +4236,7 @@ static void cy_stop(struct tty_struct *tty)
 
 	cinfo = info->card;
 	channel = info->line - cinfo->first_line;
-	if (!IS_CYC_Z(*cinfo)) {
+	if (!cy_is_Z(cinfo)) {
 		index = cinfo->bus_index;
 		chip = channel >> 2;
 		channel &= 0x03;
@@ -4296,7 +4269,7 @@ static void cy_start(struct tty_struct *tty)
 	cinfo = info->card;
 	channel = info->line - cinfo->first_line;
 	index = cinfo->bus_index;
-	if (!IS_CYC_Z(*cinfo)) {
+	if (!cy_is_Z(cinfo)) {
 		chip = channel >> 2;
 		channel &= 0x03;
 		base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index);
@@ -4347,33 +4320,20 @@ static void cy_hangup(struct tty_struct *tty)
 static int __devinit cy_init_card(struct cyclades_card *cinfo)
 {
 	struct cyclades_port *info;
-	u32 uninitialized_var(mailbox);
-	unsigned int nports, port;
+	unsigned int port;
 	unsigned short chip_number;
-	int uninitialized_var(index);
 
 	spin_lock_init(&cinfo->card_lock);
+	cinfo->intr_enabled = 0;
 
-	if (IS_CYC_Z(*cinfo)) {	/* Cyclades-Z */
-		mailbox = readl(&((struct RUNTIME_9060 __iomem *)
-				     cinfo->ctl_addr)->mail_box_0);
-		nports = (mailbox == ZE_V1) ? ZE_V1_NPORTS : 8;
-		cinfo->intr_enabled = 0;
-		cinfo->nports = 0;	/* Will be correctly set later, after
-					   Z FW is loaded */
-	} else {
-		index = cinfo->bus_index;
-		nports = cinfo->nports = CyPORTS_PER_CHIP * cinfo->num_chips;
-	}
-
-	cinfo->ports = kzalloc(sizeof(*cinfo->ports) * nports, GFP_KERNEL);
+	cinfo->ports = kcalloc(cinfo->nports, sizeof(*cinfo->ports),
+			GFP_KERNEL);
 	if (cinfo->ports == NULL) {
 		printk(KERN_ERR "Cyclades: cannot allocate ports\n");
-		cinfo->nports = 0;
 		return -ENOMEM;
 	}
 
-	for (port = cinfo->first_line; port < cinfo->first_line + nports;
+	for (port = cinfo->first_line; port < cinfo->first_line + cinfo->nports;
 			port++) {
 		info = &cinfo->ports[port - cinfo->first_line];
 		tty_port_init(&info->port);
@@ -4387,9 +4347,9 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
 		init_completion(&info->shutdown_wait);
 		init_waitqueue_head(&info->delta_msr_wait);
 
-		if (IS_CYC_Z(*cinfo)) {
+		if (cy_is_Z(cinfo)) {
 			info->type = PORT_STARTECH;
-			if (mailbox == ZO_V1)
+			if (cinfo->hw_ver == ZO_V1)
 				info->xmit_fifo_size = CYZ_FIFO_SIZE;
 			else
 				info->xmit_fifo_size = 4 * CYZ_FIFO_SIZE;
@@ -4398,6 +4358,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
 				cyz_rx_restart, (unsigned long)info);
 #endif
 		} else {
+			int index = cinfo->bus_index;
 			info->type = PORT_CIRRUS;
 			info->xmit_fifo_size = CyMAX_CHAR_FIFO;
 			info->cor1 = CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS;
@@ -4430,7 +4391,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
 	}
 
 #ifndef CONFIG_CYZ_INTR
-	if (IS_CYC_Z(*cinfo) && !timer_pending(&cyz_timerlist)) {
+	if (cy_is_Z(cinfo) && !timer_pending(&cyz_timerlist)) {
 		mod_timer(&cyz_timerlist, jiffies + 1);
 #ifdef CY_PCI_DEBUG
 		printk(KERN_DEBUG "Cyclades-Z polling initialized\n");
@@ -4621,11 +4582,12 @@ static int __init cy_detect_isa(void)
 
 		/* set cy_card */
 		cy_card[j].base_addr = cy_isa_address;
-		cy_card[j].ctl_addr = NULL;
+		cy_card[j].ctl_addr.p9050 = NULL;
 		cy_card[j].irq = (int)cy_isa_irq;
 		cy_card[j].bus_index = 0;
 		cy_card[j].first_line = cy_next_channel;
-		cy_card[j].num_chips = cy_isa_nchan / 4;
+		cy_card[j].num_chips = cy_isa_nchan / CyPORTS_PER_CHIP;
+		cy_card[j].nports = cy_isa_nchan;
 		if (cy_init_card(&cy_card[j])) {
 			cy_card[j].base_addr = NULL;
 			free_irq(cy_isa_irq, &cy_card[j]);
@@ -4781,7 +4743,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
 	struct CUSTOM_REG __iomem *cust = base_addr;
 	struct ZFW_CTRL __iomem *pt_zfwctrl;
 	void __iomem *tmp;
-	u32 mailbox, status;
+	u32 mailbox, status, nchan;
 	unsigned int i;
 	int retval;
 
@@ -4793,7 +4755,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
 
 	/* Check whether the firmware is already loaded and running. If
 	   positive, skip this board */
-	if (Z_FPGA_LOADED(ctl_addr) && readl(&fid->signature) == ZFIRM_ID) {
+	if (__cyz_fpga_loaded(ctl_addr) && readl(&fid->signature) == ZFIRM_ID) {
 		u32 cntval = readl(base_addr + 0x190);
 
 		udelay(100);
@@ -4812,7 +4774,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
 
 	mailbox = readl(&ctl_addr->mail_box_0);
 
-	if (mailbox == 0 || Z_FPGA_LOADED(ctl_addr)) {
+	if (mailbox == 0 || __cyz_fpga_loaded(ctl_addr)) {
 		/* stops CPU and set window to beginning of RAM */
 		cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
 		cy_writel(&cust->cpu_stop, 0);
@@ -4828,7 +4790,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
 				base_addr);
 		if (retval)
 			goto err_rel;
-		if (!Z_FPGA_LOADED(ctl_addr)) {
+		if (!__cyz_fpga_loaded(ctl_addr)) {
 			dev_err(&pdev->dev, "fw upload successful, but fw is "
 					"not loaded\n");
 			goto err_rel;
@@ -4887,7 +4849,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
 				"system before loading the new FW to the "
 				"Cyclades-Z.\n");
 
-			if (Z_FPGA_LOADED(ctl_addr))
+			if (__cyz_fpga_loaded(ctl_addr))
 				plx_init(pdev, irq, ctl_addr);
 
 			retval = -EIO;
@@ -4902,16 +4864,16 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
 			base_addr + ID_ADDRESS, readl(&fid->zfwctrl_addr),
 			base_addr + readl(&fid->zfwctrl_addr));
 
+	nchan = readl(&pt_zfwctrl->board_ctrl.n_channel);
 	dev_info(&pdev->dev, "Cyclades-Z FW loaded: version = %x, ports = %u\n",
-		readl(&pt_zfwctrl->board_ctrl.fw_version),
-		readl(&pt_zfwctrl->board_ctrl.n_channel));
+		readl(&pt_zfwctrl->board_ctrl.fw_version), nchan);
 
-	if (readl(&pt_zfwctrl->board_ctrl.n_channel) == 0) {
+	if (nchan == 0) {
 		dev_warn(&pdev->dev, "no Cyclades-Z ports were found. Please "
 			"check the connection between the Z host card and the "
 			"serial expanders.\n");
 
-		if (Z_FPGA_LOADED(ctl_addr))
+		if (__cyz_fpga_loaded(ctl_addr))
 			plx_init(pdev, irq, ctl_addr);
 
 		dev_info(&pdev->dev, "Null number of ports detected. Board "
@@ -4932,9 +4894,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
 	cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) |
 			0x00030800UL);
 
-	plx_init(pdev, irq, ctl_addr);
-
-	return 0;
+	return nchan;
 err_rel:
 	release_firmware(fw);
 err:
@@ -4946,7 +4906,7 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
 {
 	void __iomem *addr0 = NULL, *addr2 = NULL;
 	char *card_name = NULL;
-	u32 mailbox;
+	u32 uninitialized_var(mailbox);
 	unsigned int device_id, nchan = 0, card_no, i;
 	unsigned char plx_ver;
 	int retval, irq;
@@ -5023,11 +4983,12 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
 		}
 
 		/* Disable interrupts on the PLX before resetting it */
-		cy_writew(addr0 + 0x68, readw(addr0 + 0x68) & ~0x0900);
+		cy_writew(&ctl_addr->intr_ctrl_stat,
+				readw(&ctl_addr->intr_ctrl_stat) & ~0x0900);
 
 		plx_init(pdev, irq, addr0);
 
-		mailbox = (u32)readl(&ctl_addr->mail_box_0);
+		mailbox = readl(&ctl_addr->mail_box_0);
 
 		addr2 = ioremap_nocache(pci_resource_start(pdev, 2),
 				mailbox == ZE_V1 ? CyPCI_Ze_win : CyPCI_Zwin);
@@ -5038,12 +4999,8 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
 
 		if (mailbox == ZE_V1) {
 			card_name = "Cyclades-Ze";
-
-			readl(&ctl_addr->mail_box_0);
-			nchan = ZE_V1_NPORTS;
 		} else {
 			card_name = "Cyclades-8Zo";
-
 #ifdef CY_PCI_DEBUG
 			if (mailbox == ZO_V1) {
 				cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
@@ -5065,15 +5022,12 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
 			 */
 			if ((mailbox == ZO_V1) || (mailbox == ZO_V2))
 				cy_writel(addr2 + ID_ADDRESS, 0L);
-
-			retval = cyz_load_fw(pdev, addr2, addr0, irq);
-			if (retval)
-				goto err_unmap;
-			/* This must be a Cyclades-8Zo/PCI.  The extendable
-			   version will have a different device_id and will
-			   be allocated its maximum number of ports. */
-			nchan = 8;
 		}
+
+		retval = cyz_load_fw(pdev, addr2, addr0, irq);
+		if (retval <= 0)
+			goto err_unmap;
+		nchan = retval;
 	}
 
 	if ((cy_next_channel + nchan) > NR_PORTS) {
@@ -5103,8 +5057,10 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
 			dev_err(&pdev->dev, "could not allocate IRQ\n");
 			goto err_unmap;
 		}
-		cy_card[card_no].num_chips = nchan / 4;
+		cy_card[card_no].num_chips = nchan / CyPORTS_PER_CHIP;
 	} else {
+		cy_card[card_no].hw_ver = mailbox;
+		cy_card[card_no].num_chips = (unsigned int)-1;
 #ifdef CONFIG_CYZ_INTR
 		/* allocate IRQ only if board has an IRQ */
 		if (irq != 0 && irq != 255) {
@@ -5117,15 +5073,15 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
 			}
 		}
 #endif				/* CONFIG_CYZ_INTR */
-		cy_card[card_no].num_chips = (unsigned int)-1;
 	}
 
 	/* set cy_card */
 	cy_card[card_no].base_addr = addr2;
-	cy_card[card_no].ctl_addr = addr0;
+	cy_card[card_no].ctl_addr.p9050 = addr0;
 	cy_card[card_no].irq = irq;
 	cy_card[card_no].bus_index = 1;
 	cy_card[card_no].first_line = cy_next_channel;
+	cy_card[card_no].nports = nchan;
 	retval = cy_init_card(&cy_card[card_no]);
 	if (retval)
 		goto err_null;
@@ -5138,17 +5094,20 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
 		plx_ver = readb(addr2 + CyPLX_VER) & 0x0f;
 		switch (plx_ver) {
 		case PLX_9050:
-
 			cy_writeb(addr0 + 0x4c, 0x43);
 			break;
 
 		case PLX_9060:
 		case PLX_9080:
 		default:	/* Old boards, use PLX_9060 */
-			plx_init(pdev, irq, addr0);
-			cy_writew(addr0 + 0x68, readw(addr0 + 0x68) | 0x0900);
+		{
+			struct RUNTIME_9060 __iomem *ctl_addr = addr0;
+			plx_init(pdev, irq, ctl_addr);
+			cy_writew(&ctl_addr->intr_ctrl_stat,
+				readw(&ctl_addr->intr_ctrl_stat) | 0x0900);
 			break;
 		}
+		}
 	}
 
 	dev_info(&pdev->dev, "%s/PCI #%d found: %d channels starting from "
@@ -5179,22 +5138,23 @@ static void __devexit cy_pci_remove(struct pci_dev *pdev)
 	unsigned int i;
 
 	/* non-Z with old PLX */
-	if (!IS_CYC_Z(*cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) ==
+	if (!cy_is_Z(cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) ==
 			PLX_9050)
-		cy_writeb(cinfo->ctl_addr + 0x4c, 0);
+		cy_writeb(cinfo->ctl_addr.p9050 + 0x4c, 0);
 	else
 #ifndef CONFIG_CYZ_INTR
-		if (!IS_CYC_Z(*cinfo))
+		if (!cy_is_Z(cinfo))
 #endif
-		cy_writew(cinfo->ctl_addr + 0x68,
-				readw(cinfo->ctl_addr + 0x68) & ~0x0900);
+		cy_writew(&cinfo->ctl_addr.p9060->intr_ctrl_stat,
+			readw(&cinfo->ctl_addr.p9060->intr_ctrl_stat) &
+			~0x0900);
 
 	iounmap(cinfo->base_addr);
-	if (cinfo->ctl_addr)
-		iounmap(cinfo->ctl_addr);
+	if (cinfo->ctl_addr.p9050)
+		iounmap(cinfo->ctl_addr.p9050);
 	if (cinfo->irq
 #ifndef CONFIG_CYZ_INTR
-		&& !IS_CYC_Z(*cinfo)
+		&& !cy_is_Z(cinfo)
 #endif /* CONFIG_CYZ_INTR */
 		)
 		free_irq(cinfo->irq, cinfo);
@@ -5240,7 +5200,7 @@ static int cyclades_proc_show(struct seq_file *m, void *v)
 					(cur_jifs - info->idle_stats.recv_idle)/
 					HZ, info->idle_stats.overruns,
 					/* FIXME: double check locking */
-					(long)info->port.tty->ldisc.ops->num);
+					(long)info->port.tty->ldisc->ops->num);
 			else
 				seq_printf(m, "%3d %8lu %10lu %8lu "
 					"%10lu %8lu %9lu %6ld\n",
@@ -5386,11 +5346,11 @@ static void __exit cy_cleanup_module(void)
 			/* clear interrupt */
 			cy_writeb(card->base_addr + Cy_ClrIntr, 0);
 			iounmap(card->base_addr);
-			if (card->ctl_addr)
-				iounmap(card->ctl_addr);
+			if (card->ctl_addr.p9050)
+				iounmap(card->ctl_addr.p9050);
 			if (card->irq
 #ifndef CONFIG_CYZ_INTR
-				&& !IS_CYC_Z(*card)
+				&& !cy_is_Z(card)
 #endif /* CONFIG_CYZ_INTR */
 				)
 				free_irq(card->irq, card);

drivers/char/epca.c

@@ -745,7 +745,7 @@ static int epca_carrier_raised(struct tty_port *port)
 	return 0;
 }
 
-static void epca_raise_dtr_rts(struct tty_port *port)
+static void epca_dtr_rts(struct tty_port *port, int onoff)
 {
 }
 
@@ -925,7 +925,7 @@ static const struct tty_operations pc_ops = {
 
 static const struct tty_port_operations epca_port_ops = {
 	.carrier_raised = epca_carrier_raised,
-	.raise_dtr_rts = epca_raise_dtr_rts,
+	.dtr_rts = epca_dtr_rts,
 };
 
 static int info_open(struct tty_struct *tty, struct file *filp)
@@ -1518,7 +1518,7 @@ static void doevent(int crd)
 		if (event & MODEMCHG_IND) {
 			/* A modem signal change has been indicated */
 			ch->imodem = mstat;
-			if (test_bit(ASYNC_CHECK_CD, &ch->port.flags)) {
+			if (test_bit(ASYNCB_CHECK_CD, &ch->port.flags)) {
 				/* We are now receiving dcd */
 				if (mstat & ch->dcd)
 					wake_up_interruptible(&ch->port.open_wait);
@@ -1765,9 +1765,9 @@ static void epcaparam(struct tty_struct *tty, struct channel *ch)
 		 * that the driver will wait on carrier detect.
 		 */
 		if (ts->c_cflag & CLOCAL)
-			clear_bit(ASYNC_CHECK_CD, &ch->port.flags);
+			clear_bit(ASYNCB_CHECK_CD, &ch->port.flags);
 		else
-			set_bit(ASYNC_CHECK_CD, &ch->port.flags);
+			set_bit(ASYNCB_CHECK_CD, &ch->port.flags);
 		mval = ch->m_dtr | ch->m_rts;
 	} /* End CBAUD not detected */
 	iflag = termios2digi_i(ch, ts->c_iflag);
@@ -2114,8 +2114,8 @@ static int pc_ioctl(struct tty_struct *tty, struct file *file,
 			tty_wait_until_sent(tty, 0);
 		} else {
 			/* ldisc lock already held in ioctl */
-			if (tty->ldisc.ops->flush_buffer)
-				tty->ldisc.ops->flush_buffer(tty);
+			if (tty->ldisc->ops->flush_buffer)
+				tty->ldisc->ops->flush_buffer(tty);
 		}
 		unlock_kernel();
 		/* Fall Thru */
@@ -2244,7 +2244,8 @@ static void do_softint(struct work_struct *work)
 			if (test_and_clear_bit(EPCA_EVENT_HANGUP, &ch->event)) {
 				tty_hangup(tty);
 				wake_up_interruptible(&ch->port.open_wait);
-				clear_bit(ASYNC_NORMAL_ACTIVE, &ch->port.flags);
+				clear_bit(ASYNCB_NORMAL_ACTIVE,
+						&ch->port.flags);
 			}
 		}
 		tty_kref_put(tty);

drivers/char/ip2/i2lib.c

@@ -868,11 +868,11 @@ i2Input(i2ChanStrPtr pCh)
 		amountToMove = count;
 	}
 	// Move the first block
-	pCh->pTTY->ldisc.ops->receive_buf( pCh->pTTY,
+	pCh->pTTY->ldisc->ops->receive_buf( pCh->pTTY,
 		 &(pCh->Ibuf[stripIndex]), NULL, amountToMove );
 	// If we needed to wrap, do the second data move
 	if (count > amountToMove) {
-		pCh->pTTY->ldisc.ops->receive_buf( pCh->pTTY,
+		pCh->pTTY->ldisc->ops->receive_buf( pCh->pTTY,
 		 pCh->Ibuf, NULL, count - amountToMove );
 	}
 	// Bump and wrap the stripIndex all at once by the amount of data read. This

drivers/char/ip2/ip2main.c

@@ -1315,8 +1315,8 @@ static inline void  isig(int sig, struct tty_struct *tty, int flush)
 	if (tty->pgrp)
 		kill_pgrp(tty->pgrp, sig, 1);
 	if (flush || !L_NOFLSH(tty)) {
-		if ( tty->ldisc.ops->flush_buffer )  
-			tty->ldisc.ops->flush_buffer(tty);
+		if ( tty->ldisc->ops->flush_buffer )  
+			tty->ldisc->ops->flush_buffer(tty);
 		i2InputFlush( tty->driver_data );
 	}
 }

drivers/char/isicom.c

@@ -329,7 +329,7 @@ static inline void drop_rts(struct isi_port *port)
 
 /* card->lock MUST NOT be held */
 
-static void isicom_raise_dtr_rts(struct tty_port *port)
+static void isicom_dtr_rts(struct tty_port *port, int on)
 {
 	struct isi_port *ip = container_of(port, struct isi_port, port);
 	struct isi_board *card = ip->card;
@@ -339,10 +339,17 @@ static void isicom_raise_dtr_rts(struct tty_port *port)
 	if (!lock_card(card))
 		return;
 
-	outw(0x8000 | (channel << card->shift_count) | 0x02, base);
-	outw(0x0f04, base);
-	InterruptTheCard(base);
-	ip->status |= (ISI_DTR | ISI_RTS);
+	if (on) {
+		outw(0x8000 | (channel << card->shift_count) | 0x02, base);
+		outw(0x0f04, base);
+		InterruptTheCard(base);
+		ip->status |= (ISI_DTR | ISI_RTS);
+	} else {
+		outw(0x8000 | (channel << card->shift_count) | 0x02, base);
+		outw(0x0C04, base);
+		InterruptTheCard(base);
+		ip->status &= ~(ISI_DTR | ISI_RTS);
+	}
 	unlock_card(card);
 }
 
@@ -1339,7 +1346,7 @@ static const struct tty_operations isicom_ops = {
 
 static const struct tty_port_operations isicom_port_ops = {
 	.carrier_raised		= isicom_carrier_raised,
-	.raise_dtr_rts		= isicom_raise_dtr_rts,
+	.dtr_rts		= isicom_dtr_rts,
 };
 
 static int __devinit reset_card(struct pci_dev *pdev,

drivers/char/istallion.c

@@ -1140,14 +1140,14 @@ static int stli_carrier_raised(struct tty_port *port)
 	return (portp->sigs & TIOCM_CD) ? 1 : 0;
 }
 
-static void stli_raise_dtr_rts(struct tty_port *port)
+static void stli_dtr_rts(struct tty_port *port, int on)
 {
 	struct stliport *portp = container_of(port, struct stliport, port);
 	struct stlibrd *brdp = stli_brds[portp->brdnr];
-	stli_mkasysigs(&portp->asig, 1, 1);
+	stli_mkasysigs(&portp->asig, on, on);
 	if (stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig,
 		sizeof(asysigs_t), 0) < 0)
-			printk(KERN_WARNING "istallion: dtr raise failed.\n");
+			printk(KERN_WARNING "istallion: dtr set failed.\n");
 }
 
 
@@ -4417,7 +4417,7 @@ static const struct tty_operations stli_ops = {
 
 static const struct tty_port_operations stli_port_ops = {
 	.carrier_raised = stli_carrier_raised,
-	.raise_dtr_rts = stli_raise_dtr_rts,
+	.dtr_rts = stli_dtr_rts,
 };
 
 /*****************************************************************************/

drivers/char/moxa.c

@@ -1184,6 +1184,11 @@ static int moxa_open(struct tty_struct *tty, struct file *filp)
 		return -ENODEV;
 	}
 
+	if (port % MAX_PORTS_PER_BOARD >= brd->numPorts) {
+		mutex_unlock(&moxa_openlock);
+		return -ENODEV;
+	}
+
 	ch = &brd->ports[port % MAX_PORTS_PER_BOARD];
 	ch->port.count++;
 	tty->driver_data = ch;

drivers/char/mxser.c

@@ -547,14 +547,18 @@ static int mxser_carrier_raised(struct tty_port *port)
 	return (inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD)?1:0;
 }
 
-static void mxser_raise_dtr_rts(struct tty_port *port)
+static void mxser_dtr_rts(struct tty_port *port, int on)
 {
 	struct mxser_port *mp = container_of(port, struct mxser_port, port);
 	unsigned long flags;
 
 	spin_lock_irqsave(&mp->slock, flags);
-	outb(inb(mp->ioaddr + UART_MCR) |
-		UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR);
+	if (on)
+		outb(inb(mp->ioaddr + UART_MCR) |
+			UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR);
+	else
+		outb(inb(mp->ioaddr + UART_MCR)&~(UART_MCR_DTR | UART_MCR_RTS),
+			mp->ioaddr + UART_MCR);
 	spin_unlock_irqrestore(&mp->slock, flags);
 }
 
@@ -2356,7 +2360,7 @@ static const struct tty_operations mxser_ops = {
 
 struct tty_port_operations mxser_port_ops = {
 	.carrier_raised = mxser_carrier_raised,
-	.raise_dtr_rts = mxser_raise_dtr_rts,
+	.dtr_rts = mxser_dtr_rts,
 };
 
 /*

drivers/char/n_hdlc.c

@@ -342,8 +342,8 @@ static int n_hdlc_tty_open (struct tty_struct *tty)
 #endif
 	
 	/* Flush any pending characters in the driver and discipline. */
-	if (tty->ldisc.ops->flush_buffer)
-		tty->ldisc.ops->flush_buffer(tty);
+	if (tty->ldisc->ops->flush_buffer)
+		tty->ldisc->ops->flush_buffer(tty);
 
 	tty_driver_flush_buffer(tty);
 		

drivers/char/n_tty.c

@@ -73,24 +73,6 @@
 #define ECHO_OP_SET_CANON_COL 0x81
 #define ECHO_OP_ERASE_TAB 0x82
 
-static inline unsigned char *alloc_buf(void)
-{
-	gfp_t prio = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL;
-
-	if (PAGE_SIZE != N_TTY_BUF_SIZE)
-		return kmalloc(N_TTY_BUF_SIZE, prio);
-	else
-		return (unsigned char *)__get_free_page(prio);
-}
-
-static inline void free_buf(unsigned char *buf)
-{
-	if (PAGE_SIZE != N_TTY_BUF_SIZE)
-		kfree(buf);
-	else
-		free_page((unsigned long) buf);
-}
-
 static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
 			       unsigned char __user *ptr)
 {
@@ -1558,11 +1540,11 @@ static void n_tty_close(struct tty_struct *tty)
 {
 	n_tty_flush_buffer(tty);
 	if (tty->read_buf) {
-		free_buf(tty->read_buf);
+		kfree(tty->read_buf);
 		tty->read_buf = NULL;
 	}
 	if (tty->echo_buf) {
-		free_buf(tty->echo_buf);
+		kfree(tty->echo_buf);
 		tty->echo_buf = NULL;
 	}
 }
@@ -1584,17 +1566,16 @@ static int n_tty_open(struct tty_struct *tty)
 
 	/* These are ugly. Currently a malloc failure here can panic */
 	if (!tty->read_buf) {
-		tty->read_buf = alloc_buf();
+		tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
 		if (!tty->read_buf)
 			return -ENOMEM;
 	}
 	if (!tty->echo_buf) {
-		tty->echo_buf = alloc_buf();
+		tty->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+
 		if (!tty->echo_buf)
 			return -ENOMEM;
 	}
-	memset(tty->read_buf, 0, N_TTY_BUF_SIZE);
-	memset(tty->echo_buf, 0, N_TTY_BUF_SIZE);
 	reset_buffer_flags(tty);
 	tty->column = 0;
 	n_tty_set_termios(tty, NULL);

drivers/char/pcmcia/synclink_cs.c

@@ -383,7 +383,7 @@ static void async_mode(MGSLPC_INFO *info);
 static void tx_timeout(unsigned long context);
 
 static int carrier_raised(struct tty_port *port);
-static void raise_dtr_rts(struct tty_port *port);
+static void dtr_rts(struct tty_port *port, int onoff);
 
 #if SYNCLINK_GENERIC_HDLC
 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
@@ -513,7 +513,7 @@ static void ldisc_receive_buf(struct tty_struct *tty,
 
 static const struct tty_port_operations mgslpc_port_ops = {
 	.carrier_raised = carrier_raised,
-	.raise_dtr_rts = raise_dtr_rts
+	.dtr_rts = dtr_rts
 };
 
 static int mgslpc_probe(struct pcmcia_device *link)
@@ -2528,13 +2528,16 @@ static int carrier_raised(struct tty_port *port)
 	return 0;
 }
 
-static void raise_dtr_rts(struct tty_port *port)
+static void dtr_rts(struct tty_port *port, int onoff)
 {
 	MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port);
 	unsigned long flags;
 
 	spin_lock_irqsave(&info->lock,flags);
-	info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+	if (onoff)
+		info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+	else
+		info->serial_signals &= ~SerialSignal_RTS + SerialSignal_DTR;
 	set_signals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 }

drivers/char/pty.c

@@ -30,7 +30,6 @@
 
 #include <asm/system.h>
 
-/* These are global because they are accessed in tty_io.c */
 #ifdef CONFIG_UNIX98_PTYS
 static struct tty_driver *ptm_driver;
 static struct tty_driver *pts_driver;
@@ -111,7 +110,7 @@ static int pty_write(struct tty_struct *tty, const unsigned char *buf,
 	c = to->receive_room;
 	if (c > count)
 		c = count;
-	to->ldisc.ops->receive_buf(to, buf, NULL, c);
+	to->ldisc->ops->receive_buf(to, buf, NULL, c);
 
 	return c;
 }
@@ -149,11 +148,11 @@ static int pty_chars_in_buffer(struct tty_struct *tty)
 	int count;
 
 	/* We should get the line discipline lock for "tty->link" */
-	if (!to || !to->ldisc.ops->chars_in_buffer)
+	if (!to || !to->ldisc->ops->chars_in_buffer)
 		return 0;
 
 	/* The ldisc must report 0 if no characters available to be read */
-	count = to->ldisc.ops->chars_in_buffer(to);
+	count = to->ldisc->ops->chars_in_buffer(to);
 
 	if (tty->driver->subtype == PTY_TYPE_SLAVE)
 		return count;
@@ -187,8 +186,8 @@ static void pty_flush_buffer(struct tty_struct *tty)
 	if (!to)
 		return;
 
-	if (to->ldisc.ops->flush_buffer)
-		to->ldisc.ops->flush_buffer(to);
+	if (to->ldisc->ops->flush_buffer)
+		to->ldisc->ops->flush_buffer(to);
 
 	if (to->packet) {
 		spin_lock_irqsave(&tty->ctrl_lock, flags);

drivers/char/rocket.c

@@ -872,11 +872,16 @@ static int carrier_raised(struct tty_port *port)
 	return (sGetChanStatusLo(&info->channel) & CD_ACT) ? 1 : 0;
 }
 
-static void raise_dtr_rts(struct tty_port *port)
+static void dtr_rts(struct tty_port *port, int on)
 {
 	struct r_port *info = container_of(port, struct r_port, port);
-	sSetDTR(&info->channel);
-	sSetRTS(&info->channel);
+	if (on) {
+		sSetDTR(&info->channel);
+		sSetRTS(&info->channel);
+	} else {
+		sClrDTR(&info->channel);
+		sClrRTS(&info->channel);
+	}
 }
 
 /*
@@ -934,7 +939,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp)
 	/*
 	 * Info->count is now 1; so it's safe to sleep now.
 	 */
-	if (!test_bit(ASYNC_INITIALIZED, &port->flags)) {
+	if (!test_bit(ASYNCB_INITIALIZED, &port->flags)) {
 		cp = &info->channel;
 		sSetRxTrigger(cp, TRIG_1);
 		if (sGetChanStatus(cp) & CD_ACT)
@@ -958,7 +963,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp)
 		sEnRxFIFO(cp);
 		sEnTransmit(cp);
 
-		set_bit(ASYNC_INITIALIZED, &info->port.flags);
+		set_bit(ASYNCB_INITIALIZED, &info->port.flags);
 
 		/*
 		 * Set up the tty->alt_speed kludge
@@ -1641,7 +1646,7 @@ static int rp_write(struct tty_struct *tty,
 	/*  Write remaining data into the port's xmit_buf */
 	while (1) {
 		/* Hung up ? */
-		if (!test_bit(ASYNC_NORMAL_ACTIVE, &info->port.flags))
+		if (!test_bit(ASYNCB_NORMAL_ACTIVE, &info->port.flags))
 			goto end;
 		c = min(count, XMIT_BUF_SIZE - info->xmit_cnt - 1);
 		c = min(c, XMIT_BUF_SIZE - info->xmit_head);
@@ -2250,7 +2255,7 @@ static const struct tty_operations rocket_ops = {
 
 static const struct tty_port_operations rocket_port_ops = {
 	.carrier_raised = carrier_raised,
-	.raise_dtr_rts = raise_dtr_rts,
+	.dtr_rts = dtr_rts,
 };
 
 /*

drivers/char/selection.c

@@ -327,7 +327,7 @@ int paste_selection(struct tty_struct *tty)
 		}
 		count = sel_buffer_lth - pasted;
 		count = min(count, tty->receive_room);
-		tty->ldisc.ops->receive_buf(tty, sel_buffer + pasted,
+		tty->ldisc->ops->receive_buf(tty, sel_buffer + pasted,
 								NULL, count);
 		pasted += count;
 	}

drivers/char/stallion.c

@@ -772,11 +772,11 @@ static int stl_carrier_raised(struct tty_port *port)
 	return (portp->sigs & TIOCM_CD) ? 1 : 0;
 }
 
-static void stl_raise_dtr_rts(struct tty_port *port)
+static void stl_dtr_rts(struct tty_port *port, int on)
 {
 	struct stlport *portp = container_of(port, struct stlport, port);
 	/* Takes brd_lock internally */
-	stl_setsignals(portp, 1, 1);
+	stl_setsignals(portp, on, on);
 }
 
 /*****************************************************************************/
@@ -2547,7 +2547,7 @@ static const struct tty_operations stl_ops = {
 
 static const struct tty_port_operations stl_port_ops = {
 	.carrier_raised = stl_carrier_raised,
-	.raise_dtr_rts = stl_raise_dtr_rts,
+	.dtr_rts = stl_dtr_rts,
 };
 
 /*****************************************************************************/

drivers/char/synclink.c

@@ -3247,13 +3247,16 @@ static int carrier_raised(struct tty_port *port)
 	return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
 }
 
-static void raise_dtr_rts(struct tty_port *port)
+static void dtr_rts(struct tty_port *port, int on)
 {
 	struct mgsl_struct *info = container_of(port, struct mgsl_struct, port);
 	unsigned long flags;
 
 	spin_lock_irqsave(&info->irq_spinlock,flags);
-	info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+	if (on)
+		info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+	else
+		info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
  	usc_set_serial_signals(info);
 	spin_unlock_irqrestore(&info->irq_spinlock,flags);
 }
@@ -4258,7 +4261,7 @@ static void mgsl_add_device( struct mgsl_struct *info )
 
 static const struct tty_port_operations mgsl_port_ops = {
 	.carrier_raised = carrier_raised,
-	.raise_dtr_rts = raise_dtr_rts,
+	.dtr_rts = dtr_rts,
 };
 
 

drivers/char/synclink_gt.c

@@ -214,6 +214,7 @@ struct slgt_desc
 #define set_desc_next(a,b) (a).next   = cpu_to_le32((unsigned int)(b))
 #define set_desc_count(a,b)(a).count  = cpu_to_le16((unsigned short)(b))
 #define set_desc_eof(a,b)  (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0))
+#define set_desc_status(a, b) (a).status = cpu_to_le16((unsigned short)(b))
 #define desc_count(a)      (le16_to_cpu((a).count))
 #define desc_status(a)     (le16_to_cpu((a).status))
 #define desc_complete(a)   (le16_to_cpu((a).status) & BIT15)
@@ -297,6 +298,7 @@ struct slgt_info {
 	u32 max_frame_size;       /* as set by device config */
 
 	unsigned int rbuf_fill_level;
+	unsigned int rx_pio;
 	unsigned int if_mode;
 	unsigned int base_clock;
 
@@ -331,6 +333,8 @@ struct slgt_info {
 	struct slgt_desc *rbufs;
 	unsigned int rbuf_current;
 	unsigned int rbuf_index;
+	unsigned int rbuf_fill_index;
+	unsigned short rbuf_fill_count;
 
 	unsigned int tbuf_count;
 	struct slgt_desc *tbufs;
@@ -2110,6 +2114,40 @@ static void ri_change(struct slgt_info *info, unsigned short status)
 	info->pending_bh |= BH_STATUS;
 }
 
+static void isr_rxdata(struct slgt_info *info)
+{
+	unsigned int count = info->rbuf_fill_count;
+	unsigned int i = info->rbuf_fill_index;
+	unsigned short reg;
+
+	while (rd_reg16(info, SSR) & IRQ_RXDATA) {
+		reg = rd_reg16(info, RDR);
+		DBGISR(("isr_rxdata %s RDR=%04X\n", info->device_name, reg));
+		if (desc_complete(info->rbufs[i])) {
+			/* all buffers full */
+			rx_stop(info);
+			info->rx_restart = 1;
+			continue;
+		}
+		info->rbufs[i].buf[count++] = (unsigned char)reg;
+		/* async mode saves status byte to buffer for each data byte */
+		if (info->params.mode == MGSL_MODE_ASYNC)
+			info->rbufs[i].buf[count++] = (unsigned char)(reg >> 8);
+		if (count == info->rbuf_fill_level || (reg & BIT10)) {
+			/* buffer full or end of frame */
+			set_desc_count(info->rbufs[i], count);
+			set_desc_status(info->rbufs[i], BIT15 | (reg >> 8));
+			info->rbuf_fill_count = count = 0;
+			if (++i == info->rbuf_count)
+				i = 0;
+			info->pending_bh |= BH_RECEIVE;
+		}
+	}
+
+	info->rbuf_fill_index = i;
+	info->rbuf_fill_count = count;
+}
+
 static void isr_serial(struct slgt_info *info)
 {
 	unsigned short status = rd_reg16(info, SSR);
@@ -2125,6 +2163,8 @@ static void isr_serial(struct slgt_info *info)
 			if (info->tx_count)
 				isr_txeom(info, status);
 		}
+		if (info->rx_pio && (status & IRQ_RXDATA))
+			isr_rxdata(info);
 		if ((status & IRQ_RXBREAK) && (status & RXBREAK)) {
 			info->icount.brk++;
 			/* process break detection if tty control allows */
@@ -2141,7 +2181,8 @@ static void isr_serial(struct slgt_info *info)
 	} else {
 		if (status & (IRQ_TXIDLE + IRQ_TXUNDER))
 			isr_txeom(info, status);
-
+		if (info->rx_pio && (status & IRQ_RXDATA))
+			isr_rxdata(info);
 		if (status & IRQ_RXIDLE) {
 			if (status & RXIDLE)
 				info->icount.rxidle++;
@@ -2642,6 +2683,10 @@ static int rx_enable(struct slgt_info *info, int enable)
 			return -EINVAL;
 		}
 		info->rbuf_fill_level = rbuf_fill_level;
+		if (rbuf_fill_level < 128)
+			info->rx_pio = 1; /* PIO mode */
+		else
+			info->rx_pio = 0; /* DMA mode */
 		rx_stop(info); /* restart receiver to use new fill level */
 	}
 
@@ -3099,13 +3144,16 @@ static int carrier_raised(struct tty_port *port)
 	return (info->signals & SerialSignal_DCD) ? 1 : 0;
 }
 
-static void raise_dtr_rts(struct tty_port *port)
+static void dtr_rts(struct tty_port *port, int on)
 {
 	unsigned long flags;
 	struct slgt_info *info = container_of(port, struct slgt_info, port);
 
 	spin_lock_irqsave(&info->lock,flags);
-	info->signals |= SerialSignal_RTS + SerialSignal_DTR;
+	if (on)
+		info->signals |= SerialSignal_RTS + SerialSignal_DTR;
+	else
+		info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
  	set_signals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 }
@@ -3419,7 +3467,7 @@ static void add_device(struct slgt_info *info)
 
 static const struct tty_port_operations slgt_port_ops = {
 	.carrier_raised = carrier_raised,
-	.raise_dtr_rts = raise_dtr_rts,
+	.dtr_rts = dtr_rts,
 };
 
 /*
@@ -3841,15 +3889,27 @@ static void rx_start(struct slgt_info *info)
 	rdma_reset(info);
 	reset_rbufs(info);
 
-	/* set 1st descriptor address */
-	wr_reg32(info, RDDAR, info->rbufs[0].pdesc);
-
-	if (info->params.mode != MGSL_MODE_ASYNC) {
-		/* enable rx DMA and DMA interrupt */
-		wr_reg32(info, RDCSR, (BIT2 + BIT0));
+	if (info->rx_pio) {
+		/* rx request when rx FIFO not empty */
+		wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) & ~BIT14));
+		slgt_irq_on(info, IRQ_RXDATA);
+		if (info->params.mode == MGSL_MODE_ASYNC) {
+			/* enable saving of rx status */
+			wr_reg32(info, RDCSR, BIT6);
+		}
 	} else {
-		/* enable saving of rx status, rx DMA and DMA interrupt */
-		wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0));
+		/* rx request when rx FIFO half full */
+		wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT14));
+		/* set 1st descriptor address */
+		wr_reg32(info, RDDAR, info->rbufs[0].pdesc);
+
+		if (info->params.mode != MGSL_MODE_ASYNC) {
+			/* enable rx DMA and DMA interrupt */
+			wr_reg32(info, RDCSR, (BIT2 + BIT0));
+		} else {
+			/* enable saving of rx status, rx DMA and DMA interrupt */
+			wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0));
+		}
 	}
 
 	slgt_irq_on(info, IRQ_RXOVER);
@@ -4467,6 +4527,8 @@ static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last
 static void reset_rbufs(struct slgt_info *info)
 {
 	free_rbufs(info, 0, info->rbuf_count - 1);
+	info->rbuf_fill_index = 0;
+	info->rbuf_fill_count = 0;
 }
 
 /*

drivers/char/synclinkmp.c

@@ -3277,13 +3277,16 @@ static int carrier_raised(struct tty_port *port)
 	return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
 }
 
-static void raise_dtr_rts(struct tty_port *port)
+static void dtr_rts(struct tty_port *port, int on)
 {
 	SLMP_INFO *info = container_of(port, SLMP_INFO, port);
 	unsigned long flags;
 
 	spin_lock_irqsave(&info->lock,flags);
-	info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+	if (on)
+		info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+	else
+		info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
  	set_signals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 }
@@ -3746,7 +3749,7 @@ static void add_device(SLMP_INFO *info)
 
 static const struct tty_port_operations port_ops = {
 	.carrier_raised = carrier_raised,
-	.raise_dtr_rts = raise_dtr_rts,
+	.dtr_rts = dtr_rts,
 };
 
 /* Allocate and initialize a device instance structure

drivers/char/tty_audit.c

@@ -29,10 +29,7 @@ static struct tty_audit_buf *tty_audit_buf_alloc(int major, int minor,
 	buf = kmalloc(sizeof(*buf), GFP_KERNEL);
 	if (!buf)
 		goto err;
-	if (PAGE_SIZE != N_TTY_BUF_SIZE)
-		buf->data = kmalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
-	else
-		buf->data = (unsigned char *)__get_free_page(GFP_KERNEL);
+	buf->data = kmalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
 	if (!buf->data)
 		goto err_buf;
 	atomic_set(&buf->count, 1);
@@ -52,10 +49,7 @@ err:
 static void tty_audit_buf_free(struct tty_audit_buf *buf)
 {
 	WARN_ON(buf->valid != 0);
-	if (PAGE_SIZE != N_TTY_BUF_SIZE)
-		kfree(buf->data);
-	else
-		free_page((unsigned long)buf->data);
+	kfree(buf->data);
 	kfree(buf);
 }
 

drivers/char/tty_io.c

@@ -295,7 +295,7 @@ struct tty_driver *tty_find_polling_driver(char *name, int *line)
 	struct tty_driver *p, *res = NULL;
 	int tty_line = 0;
 	int len;
-	char *str;
+	char *str, *stp;
 
 	for (str = name; *str; str++)
 		if ((*str >= '0' && *str <= '9') || *str == ',')
@@ -311,13 +311,14 @@ struct tty_driver *tty_find_polling_driver(char *name, int *line)
 	list_for_each_entry(p, &tty_drivers, tty_drivers) {
 		if (strncmp(name, p->name, len) != 0)
 			continue;
-		if (*str == ',')
-			str++;
-		if (*str == '\0')
-			str = NULL;
+		stp = str;
+		if (*stp == ',')
+			stp++;
+		if (*stp == '\0')
+			stp = NULL;
 
 		if (tty_line >= 0 && tty_line <= p->num && p->ops &&
-		    p->ops->poll_init && !p->ops->poll_init(p, tty_line, str)) {
+		    p->ops->poll_init && !p->ops->poll_init(p, tty_line, stp)) {
 			res = tty_driver_kref_get(p);
 			*line = tty_line;
 			break;
@@ -469,43 +470,6 @@ void tty_wakeup(struct tty_struct *tty)
 
 EXPORT_SYMBOL_GPL(tty_wakeup);
 
-/**
- *	tty_ldisc_flush	-	flush line discipline queue
- *	@tty: tty
- *
- *	Flush the line discipline queue (if any) for this tty. If there
- *	is no line discipline active this is a no-op.
- */
-
-void tty_ldisc_flush(struct tty_struct *tty)
-{
-	struct tty_ldisc *ld = tty_ldisc_ref(tty);
-	if (ld) {
-		if (ld->ops->flush_buffer)
-			ld->ops->flush_buffer(tty);
-		tty_ldisc_deref(ld);
-	}
-	tty_buffer_flush(tty);
-}
-
-EXPORT_SYMBOL_GPL(tty_ldisc_flush);
-
-/**
- *	tty_reset_termios	-	reset terminal state
- *	@tty: tty to reset
- *
- *	Restore a terminal to the driver default state
- */
-
-static void tty_reset_termios(struct tty_struct *tty)
-{
-	mutex_lock(&tty->termios_mutex);
-	*tty->termios = tty->driver->init_termios;
-	tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
-	tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
-	mutex_unlock(&tty->termios_mutex);
-}
-
 /**
  *	do_tty_hangup		-	actual handler for hangup events
  *	@work: tty device
@@ -535,7 +499,6 @@ static void do_tty_hangup(struct work_struct *work)
 	struct file *cons_filp = NULL;
 	struct file *filp, *f = NULL;
 	struct task_struct *p;
-	struct tty_ldisc *ld;
 	int    closecount = 0, n;
 	unsigned long flags;
 	int refs = 0;
@@ -566,40 +529,8 @@ static void do_tty_hangup(struct work_struct *work)
 		filp->f_op = &hung_up_tty_fops;
 	}
 	file_list_unlock();
-	/*
-	 * FIXME! What are the locking issues here? This may me overdoing
-	 * things... This question is especially important now that we've
-	 * removed the irqlock.
-	 */
-	ld = tty_ldisc_ref(tty);
-	if (ld != NULL) {
-		/* We may have no line discipline at this point */
-		if (ld->ops->flush_buffer)
-			ld->ops->flush_buffer(tty);
-		tty_driver_flush_buffer(tty);
-		if ((test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) &&
-		    ld->ops->write_wakeup)
-			ld->ops->write_wakeup(tty);
-		if (ld->ops->hangup)
-			ld->ops->hangup(tty);
-	}
-	/*
-	 * FIXME: Once we trust the LDISC code better we can wait here for
-	 * ldisc completion and fix the driver call race
-	 */
-	wake_up_interruptible_poll(&tty->write_wait, POLLOUT);
-	wake_up_interruptible_poll(&tty->read_wait, POLLIN);
-	/*
-	 * Shutdown the current line discipline, and reset it to
-	 * N_TTY.
-	 */
-	if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
-		tty_reset_termios(tty);
-	/* Defer ldisc switch */
-	/* tty_deferred_ldisc_switch(N_TTY);
 
-	  This should get done automatically when the port closes and
-	  tty_release is called */
+	tty_ldisc_hangup(tty);
 
 	read_lock(&tasklist_lock);
 	if (tty->session) {
@@ -628,12 +559,15 @@ static void do_tty_hangup(struct work_struct *work)
 	read_unlock(&tasklist_lock);
 
 	spin_lock_irqsave(&tty->ctrl_lock, flags);
-	tty->flags = 0;
+	clear_bit(TTY_THROTTLED, &tty->flags);
+	clear_bit(TTY_PUSH, &tty->flags);
+	clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
 	put_pid(tty->session);
 	put_pid(tty->pgrp);
 	tty->session = NULL;
 	tty->pgrp = NULL;
 	tty->ctrl_status = 0;
+	set_bit(TTY_HUPPED, &tty->flags);
 	spin_unlock_irqrestore(&tty->ctrl_lock, flags);
 
 	/* Account for the p->signal references we killed */
@@ -659,10 +593,7 @@ static void do_tty_hangup(struct work_struct *work)
 	 * can't yet guarantee all that.
 	 */
 	set_bit(TTY_HUPPED, &tty->flags);
-	if (ld) {
-		tty_ldisc_enable(tty);
-		tty_ldisc_deref(ld);
-	}
+	tty_ldisc_enable(tty);
 	unlock_kernel();
 	if (f)
 		fput(f);
@@ -2480,6 +2411,24 @@ static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int
 	return tty->ops->tiocmset(tty, file, set, clear);
 }
 
+struct tty_struct *tty_pair_get_tty(struct tty_struct *tty)
+{
+	if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
+	    tty->driver->subtype == PTY_TYPE_MASTER)
+		tty = tty->link;
+	return tty;
+}
+EXPORT_SYMBOL(tty_pair_get_tty);
+
+struct tty_struct *tty_pair_get_pty(struct tty_struct *tty)
+{
+	if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
+	    tty->driver->subtype == PTY_TYPE_MASTER)
+	    return tty;
+	return tty->link;
+}
+EXPORT_SYMBOL(tty_pair_get_pty);
+
 /*
  * Split this up, as gcc can choke on it otherwise..
  */
@@ -2495,11 +2444,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	if (tty_paranoia_check(tty, inode, "tty_ioctl"))
 		return -EINVAL;
 
-	real_tty = tty;
-	if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
-	    tty->driver->subtype == PTY_TYPE_MASTER)
-		real_tty = tty->link;
-
+	real_tty = tty_pair_get_tty(tty);
 
 	/*
 	 * Factor out some common prep work
@@ -2555,7 +2500,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	case TIOCGSID:
 		return tiocgsid(tty, real_tty, p);
 	case TIOCGETD:
-		return put_user(tty->ldisc.ops->num, (int __user *)p);
+		return put_user(tty->ldisc->ops->num, (int __user *)p);
 	case TIOCSETD:
 		return tiocsetd(tty, p);
 	/*
@@ -2770,6 +2715,7 @@ void initialize_tty_struct(struct tty_struct *tty,
 	tty->buf.head = tty->buf.tail = NULL;
 	tty_buffer_init(tty);
 	mutex_init(&tty->termios_mutex);
+	mutex_init(&tty->ldisc_mutex);
 	init_waitqueue_head(&tty->write_wait);
 	init_waitqueue_head(&tty->read_wait);
 	INIT_WORK(&tty->hangup_work, do_tty_hangup);

drivers/char/tty_ioctl.c

@@ -97,14 +97,19 @@ EXPORT_SYMBOL(tty_driver_flush_buffer);
  *	@tty: terminal
  *
  *	Indicate that a tty should stop transmitting data down the stack.
+ *	Takes the termios mutex to protect against parallel throttle/unthrottle
+ *	and also to ensure the driver can consistently reference its own
+ *	termios data at this point when implementing software flow control.
  */
 
 void tty_throttle(struct tty_struct *tty)
 {
+	mutex_lock(&tty->termios_mutex);
 	/* check TTY_THROTTLED first so it indicates our state */
 	if (!test_and_set_bit(TTY_THROTTLED, &tty->flags) &&
 	    tty->ops->throttle)
 		tty->ops->throttle(tty);
+	mutex_unlock(&tty->termios_mutex);
 }
 EXPORT_SYMBOL(tty_throttle);
 
@@ -113,13 +118,21 @@ EXPORT_SYMBOL(tty_throttle);
  *	@tty: terminal
  *
  *	Indicate that a tty may continue transmitting data down the stack.
+ *	Takes the termios mutex to protect against parallel throttle/unthrottle
+ *	and also to ensure the driver can consistently reference its own
+ *	termios data at this point when implementing software flow control.
+ *
+ *	Drivers should however remember that the stack can issue a throttle,
+ *	then change flow control method, then unthrottle.
  */
 
 void tty_unthrottle(struct tty_struct *tty)
 {
+	mutex_lock(&tty->termios_mutex);
 	if (test_and_clear_bit(TTY_THROTTLED, &tty->flags) &&
 	    tty->ops->unthrottle)
 		tty->ops->unthrottle(tty);
+	mutex_unlock(&tty->termios_mutex);
 }
 EXPORT_SYMBOL(tty_unthrottle);
 
@@ -613,9 +626,25 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt)
 	return 0;
 }
 
+static void copy_termios(struct tty_struct *tty, struct ktermios *kterm)
+{
+	mutex_lock(&tty->termios_mutex);
+	memcpy(kterm, tty->termios, sizeof(struct ktermios));
+	mutex_unlock(&tty->termios_mutex);
+}
+
+static void copy_termios_locked(struct tty_struct *tty, struct ktermios *kterm)
+{
+	mutex_lock(&tty->termios_mutex);
+	memcpy(kterm, tty->termios_locked, sizeof(struct ktermios));
+	mutex_unlock(&tty->termios_mutex);
+}
+
 static int get_termio(struct tty_struct *tty, struct termio __user *termio)
 {
-	if (kernel_termios_to_user_termio(termio, tty->termios))
+	struct ktermios kterm;
+	copy_termios(tty, &kterm);
+	if (kernel_termios_to_user_termio(termio, &kterm))
 		return -EFAULT;
 	return 0;
 }
@@ -917,6 +946,8 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
 	struct tty_struct *real_tty;
 	void __user *p = (void __user *)arg;
 	int ret = 0;
+	struct ktermios kterm;
+	struct termiox ktermx;
 
 	if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
 	    tty->driver->subtype == PTY_TYPE_MASTER)
@@ -952,23 +983,20 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
 		return set_termios(real_tty, p, TERMIOS_OLD);
 #ifndef TCGETS2
 	case TCGETS:
-		mutex_lock(&real_tty->termios_mutex);
-		if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios))
+		copy_termios(real_tty, &kterm);
+		if (kernel_termios_to_user_termios((struct termios __user *)arg, &kterm))
 			ret = -EFAULT;
-		mutex_unlock(&real_tty->termios_mutex);
 		return ret;
 #else
 	case TCGETS:
-		mutex_lock(&real_tty->termios_mutex);
-		if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios))
+		copy_termios(real_tty, &kterm);
+		if (kernel_termios_to_user_termios_1((struct termios __user *)arg, &kterm))
 			ret = -EFAULT;
-		mutex_unlock(&real_tty->termios_mutex);
 		return ret;
 	case TCGETS2:
-		mutex_lock(&real_tty->termios_mutex);
-		if (kernel_termios_to_user_termios((struct termios2 __user *)arg, real_tty->termios))
+		copy_termios(real_tty, &kterm);
+		if (kernel_termios_to_user_termios((struct termios2 __user *)arg, &kterm))
 			ret = -EFAULT;
-		mutex_unlock(&real_tty->termios_mutex);
 		return ret;
 	case TCSETSF2:
 		return set_termios(real_tty, p,  TERMIOS_FLUSH | TERMIOS_WAIT);
@@ -987,34 +1015,36 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
 		return set_termios(real_tty, p, TERMIOS_TERMIO);
 #ifndef TCGETS2
 	case TIOCGLCKTRMIOS:
-		mutex_lock(&real_tty->termios_mutex);
-		if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked))
+		copy_termios_locked(real_tty, &kterm);
+		if (kernel_termios_to_user_termios((struct termios __user *)arg, &kterm))
 			ret = -EFAULT;
-		mutex_unlock(&real_tty->termios_mutex);
 		return ret;
 	case TIOCSLCKTRMIOS:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		mutex_lock(&real_tty->termios_mutex);
-		if (user_termios_to_kernel_termios(real_tty->termios_locked,
+		copy_termios_locked(real_tty, &kterm);
+		if (user_termios_to_kernel_termios(&kterm,
 					       (struct termios __user *) arg))
-			ret = -EFAULT;
+			return -EFAULT;
+		mutex_lock(&real_tty->termios_mutex);
+		memcpy(real_tty->termios_locked, &kterm, sizeof(struct ktermios));
 		mutex_unlock(&real_tty->termios_mutex);
-		return ret;
+		return 0;
 #else
 	case TIOCGLCKTRMIOS:
-		mutex_lock(&real_tty->termios_mutex);
-		if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios_locked))
+		copy_termios_locked(real_tty, &kterm);
+		if (kernel_termios_to_user_termios_1((struct termios __user *)arg, &kterm))
 			ret = -EFAULT;
-		mutex_unlock(&real_tty->termios_mutex);
 		return ret;
 	case TIOCSLCKTRMIOS:
 		if (!capable(CAP_SYS_ADMIN))
-			ret = -EPERM;
-		mutex_lock(&real_tty->termios_mutex);
-		if (user_termios_to_kernel_termios_1(real_tty->termios_locked,
+			return -EPERM;
+		copy_termios_locked(real_tty, &kterm);
+		if (user_termios_to_kernel_termios_1(&kterm,
 					       (struct termios __user *) arg))
-			ret = -EFAULT;
+			return -EFAULT;
+		mutex_lock(&real_tty->termios_mutex);
+		memcpy(real_tty->termios_locked, &kterm, sizeof(struct ktermios));
 		mutex_unlock(&real_tty->termios_mutex);
 		return ret;
 #endif
@@ -1023,9 +1053,10 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
 		if (real_tty->termiox == NULL)
 			return -EINVAL;
 		mutex_lock(&real_tty->termios_mutex);
-		if (copy_to_user(p, real_tty->termiox, sizeof(struct termiox)))
-			ret = -EFAULT;
+		memcpy(&ktermx, real_tty->termiox, sizeof(struct termiox));
 		mutex_unlock(&real_tty->termios_mutex);
+		if (copy_to_user(p, &ktermx, sizeof(struct termiox)))
+			ret = -EFAULT;
 		return ret;
 	case TCSETX:
 		return set_termiox(real_tty, p, 0);
@@ -1035,10 +1066,9 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
 		return set_termiox(real_tty, p, TERMIOS_FLUSH);
 #endif		
 	case TIOCGSOFTCAR:
-		mutex_lock(&real_tty->termios_mutex);
-		ret = put_user(C_CLOCAL(real_tty) ? 1 : 0,
+		copy_termios(real_tty, &kterm);
+		ret = put_user((kterm.c_cflag & CLOCAL) ? 1 : 0,
 						(int __user *)arg);
-		mutex_unlock(&real_tty->termios_mutex);
 		return ret;
 	case TIOCSSOFTCAR:
 		if (get_user(arg, (unsigned int __user *) arg))

drivers/char/tty_ldisc.c

@@ -115,19 +115,22 @@ EXPORT_SYMBOL(tty_unregister_ldisc);
 /**
  *	tty_ldisc_try_get	-	try and reference an ldisc
  *	@disc: ldisc number
- *	@ld: tty ldisc structure to complete
  *
  *	Attempt to open and lock a line discipline into place. Return
- *	the line discipline refcounted and assigned in ld. On an error
- *	report the error code back
+ *	the line discipline refcounted or an error.
  */
 
-static int tty_ldisc_try_get(int disc, struct tty_ldisc *ld)
+static struct tty_ldisc *tty_ldisc_try_get(int disc)
 {
 	unsigned long flags;
+	struct tty_ldisc *ld;
 	struct tty_ldisc_ops *ldops;
 	int err = -EINVAL;
-	
+
+	ld = kmalloc(sizeof(struct tty_ldisc), GFP_KERNEL);
+	if (ld == NULL)
+		return ERR_PTR(-ENOMEM);
+
 	spin_lock_irqsave(&tty_ldisc_lock, flags);
 	ld->ops = NULL;
 	ldops = tty_ldiscs[disc];
@@ -140,17 +143,19 @@ static int tty_ldisc_try_get(int disc, struct tty_ldisc *ld)
 			/* lock it */
 			ldops->refcount++;
 			ld->ops = ldops;
+			ld->refcount = 0;
 			err = 0;
 		}
 	}
 	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-	return err;
+	if (err)
+		return ERR_PTR(err);
+	return ld;
 }
 
 /**
  *	tty_ldisc_get		-	take a reference to an ldisc
  *	@disc: ldisc number
- *	@ld: tty line discipline structure to use
  *
  *	Takes a reference to a line discipline. Deals with refcounts and
  *	module locking counts. Returns NULL if the discipline is not available.
@@ -161,52 +166,54 @@ static int tty_ldisc_try_get(int disc, struct tty_ldisc *ld)
  *		takes tty_ldisc_lock to guard against ldisc races
  */
 
-static int tty_ldisc_get(int disc, struct tty_ldisc *ld)
+static struct tty_ldisc *tty_ldisc_get(int disc)
 {
-	int err;
+	struct tty_ldisc *ld;
 
 	if (disc < N_TTY || disc >= NR_LDISCS)
-		return -EINVAL;
-	err = tty_ldisc_try_get(disc, ld);
-	if (err < 0) {
+		return ERR_PTR(-EINVAL);
+	ld = tty_ldisc_try_get(disc);
+	if (IS_ERR(ld)) {
 		request_module("tty-ldisc-%d", disc);
-		err = tty_ldisc_try_get(disc, ld);
+		ld = tty_ldisc_try_get(disc);
 	}
-	return err;
+	return ld;
 }
 
 /**
  *	tty_ldisc_put		-	drop ldisc reference
- *	@disc: ldisc number
+ *	@ld: ldisc
  *
  *	Drop a reference to a line discipline. Manage refcounts and
- *	module usage counts
+ *	module usage counts. Free the ldisc once the recount hits zero.
  *
  *	Locking:
  *		takes tty_ldisc_lock to guard against ldisc races
  */
 
-static void tty_ldisc_put(struct tty_ldisc_ops *ld)
+static void tty_ldisc_put(struct tty_ldisc *ld)
 {
 	unsigned long flags;
-	int disc = ld->num;
+	int disc = ld->ops->num;
+	struct tty_ldisc_ops *ldo;
 
 	BUG_ON(disc < N_TTY || disc >= NR_LDISCS);
 
 	spin_lock_irqsave(&tty_ldisc_lock, flags);
-	ld = tty_ldiscs[disc];
-	BUG_ON(ld->refcount == 0);
-	ld->refcount--;
-	module_put(ld->owner);
+	ldo = tty_ldiscs[disc];
+	BUG_ON(ldo->refcount == 0);
+	ldo->refcount--;
+	module_put(ldo->owner);
 	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+	kfree(ld);
 }
 
-static void * tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos)
+static void *tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos)
 {
 	return (*pos < NR_LDISCS) ? pos : NULL;
 }
 
-static void * tty_ldiscs_seq_next(struct seq_file *m, void *v, loff_t *pos)
+static void *tty_ldiscs_seq_next(struct seq_file *m, void *v, loff_t *pos)
 {
 	(*pos)++;
 	return (*pos < NR_LDISCS) ? pos : NULL;
@@ -219,12 +226,13 @@ static void tty_ldiscs_seq_stop(struct seq_file *m, void *v)
 static int tty_ldiscs_seq_show(struct seq_file *m, void *v)
 {
 	int i = *(loff_t *)v;
-	struct tty_ldisc ld;
-	
-	if (tty_ldisc_get(i, &ld) < 0)
+	struct tty_ldisc *ld;
+
+	ld = tty_ldisc_try_get(i);
+	if (IS_ERR(ld))
 		return 0;
-	seq_printf(m, "%-10s %2d\n", ld.ops->name ? ld.ops->name : "???", i);
-	tty_ldisc_put(ld.ops);
+	seq_printf(m, "%-10s %2d\n", ld->ops->name ? ld->ops->name : "???", i);
+	tty_ldisc_put(ld);
 	return 0;
 }
 
@@ -263,8 +271,7 @@ const struct file_operations tty_ldiscs_proc_fops = {
 
 static void tty_ldisc_assign(struct tty_struct *tty, struct tty_ldisc *ld)
 {
-	ld->refcount = 0;
-	tty->ldisc = *ld;
+	tty->ldisc = ld;
 }
 
 /**
@@ -286,7 +293,7 @@ static int tty_ldisc_try(struct tty_struct *tty)
 	int ret = 0;
 
 	spin_lock_irqsave(&tty_ldisc_lock, flags);
-	ld = &tty->ldisc;
+	ld = tty->ldisc;
 	if (test_bit(TTY_LDISC, &tty->flags)) {
 		ld->refcount++;
 		ret = 1;
@@ -315,10 +322,9 @@ struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty)
 {
 	/* wait_event is a macro */
 	wait_event(tty_ldisc_wait, tty_ldisc_try(tty));
-	WARN_ON(tty->ldisc.refcount == 0);
-	return &tty->ldisc;
+	WARN_ON(tty->ldisc->refcount == 0);
+	return tty->ldisc;
 }
-
 EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);
 
 /**
@@ -335,10 +341,9 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);
 struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty)
 {
 	if (tty_ldisc_try(tty))
-		return &tty->ldisc;
+		return tty->ldisc;
 	return NULL;
 }
-
 EXPORT_SYMBOL_GPL(tty_ldisc_ref);
 
 /**
@@ -366,7 +371,6 @@ void tty_ldisc_deref(struct tty_ldisc *ld)
 		wake_up(&tty_ldisc_wait);
 	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
 }
-
 EXPORT_SYMBOL_GPL(tty_ldisc_deref);
 
 /**
@@ -388,6 +392,26 @@ void tty_ldisc_enable(struct tty_struct *tty)
 	wake_up(&tty_ldisc_wait);
 }
 
+/**
+ *	tty_ldisc_flush	-	flush line discipline queue
+ *	@tty: tty
+ *
+ *	Flush the line discipline queue (if any) for this tty. If there
+ *	is no line discipline active this is a no-op.
+ */
+
+void tty_ldisc_flush(struct tty_struct *tty)
+{
+	struct tty_ldisc *ld = tty_ldisc_ref(tty);
+	if (ld) {
+		if (ld->ops->flush_buffer)
+			ld->ops->flush_buffer(tty);
+		tty_ldisc_deref(ld);
+	}
+	tty_buffer_flush(tty);
+}
+EXPORT_SYMBOL_GPL(tty_ldisc_flush);
+
 /**
  *	tty_set_termios_ldisc		-	set ldisc field
  *	@tty: tty structure
@@ -407,6 +431,39 @@ static void tty_set_termios_ldisc(struct tty_struct *tty, int num)
 	mutex_unlock(&tty->termios_mutex);
 }
 
+/**
+ *	tty_ldisc_open		-	open a line discipline
+ *	@tty: tty we are opening the ldisc on
+ *	@ld: discipline to open
+ *
+ *	A helper opening method. Also a convenient debugging and check
+ *	point.
+ */
+
+static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld)
+{
+	WARN_ON(test_and_set_bit(TTY_LDISC_OPEN, &tty->flags));
+	if (ld->ops->open)
+		return ld->ops->open(tty);
+	return 0;
+}
+
+/**
+ *	tty_ldisc_close		-	close a line discipline
+ *	@tty: tty we are opening the ldisc on
+ *	@ld: discipline to close
+ *
+ *	A helper close method. Also a convenient debugging and check
+ *	point.
+ */
+
+static void tty_ldisc_close(struct tty_struct *tty, struct tty_ldisc *ld)
+{
+	WARN_ON(!test_bit(TTY_LDISC_OPEN, &tty->flags));
+	clear_bit(TTY_LDISC_OPEN, &tty->flags);
+	if (ld->ops->close)
+		ld->ops->close(tty);
+}
 
 /**
  *	tty_ldisc_restore	-	helper for tty ldisc change
@@ -420,66 +477,136 @@ static void tty_set_termios_ldisc(struct tty_struct *tty, int num)
 static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
 {
 	char buf[64];
-	struct tty_ldisc new_ldisc;
+	struct tty_ldisc *new_ldisc;
+	int r;
 
 	/* There is an outstanding reference here so this is safe */
-	tty_ldisc_get(old->ops->num, old);
+	old = tty_ldisc_get(old->ops->num);
+	WARN_ON(IS_ERR(old));
 	tty_ldisc_assign(tty, old);
 	tty_set_termios_ldisc(tty, old->ops->num);
-	if (old->ops->open && (old->ops->open(tty) < 0)) {
-		tty_ldisc_put(old->ops);
+	if (tty_ldisc_open(tty, old) < 0) {
+		tty_ldisc_put(old);
 		/* This driver is always present */
-		if (tty_ldisc_get(N_TTY, &new_ldisc) < 0)
+		new_ldisc = tty_ldisc_get(N_TTY);
+		if (IS_ERR(new_ldisc))
 			panic("n_tty: get");
-		tty_ldisc_assign(tty, &new_ldisc);
+		tty_ldisc_assign(tty, new_ldisc);
 		tty_set_termios_ldisc(tty, N_TTY);
-		if (new_ldisc.ops->open) {
-			int r = new_ldisc.ops->open(tty);
-				if (r < 0)
-				panic("Couldn't open N_TTY ldisc for "
-				      "%s --- error %d.",
-				      tty_name(tty, buf), r);
-		}
+		r = tty_ldisc_open(tty, new_ldisc);
+		if (r < 0)
+			panic("Couldn't open N_TTY ldisc for "
+			      "%s --- error %d.",
+			      tty_name(tty, buf), r);
 	}
 }
 
+/**
+ *	tty_ldisc_halt		-	shut down the line discipline
+ *	@tty: tty device
+ *
+ *	Shut down the line discipline and work queue for this tty device.
+ *	The TTY_LDISC flag being cleared ensures no further references can
+ *	be obtained while the delayed work queue halt ensures that no more
+ *	data is fed to the ldisc.
+ *
+ *	In order to wait for any existing references to complete see
+ *	tty_ldisc_wait_idle.
+ */
+
+static int tty_ldisc_halt(struct tty_struct *tty)
+{
+	clear_bit(TTY_LDISC, &tty->flags);
+	return cancel_delayed_work(&tty->buf.work);
+}
+
+/**
+ *	tty_ldisc_wait_idle	-	wait for the ldisc to become idle
+ *	@tty: tty to wait for
+ *
+ *	Wait for the line discipline to become idle. The discipline must
+ *	have been halted for this to guarantee it remains idle.
+ *
+ *	tty_ldisc_lock protects the ref counts currently.
+ */
+
+static int tty_ldisc_wait_idle(struct tty_struct *tty)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&tty_ldisc_lock, flags);
+	while (tty->ldisc->refcount) {
+		spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+		if (wait_event_timeout(tty_ldisc_wait,
+				tty->ldisc->refcount == 0, 5 * HZ) == 0)
+			return -EBUSY;
+		spin_lock_irqsave(&tty_ldisc_lock, flags);
+	}
+	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+	return 0;
+}
+
 /**
  *	tty_set_ldisc		-	set line discipline
  *	@tty: the terminal to set
  *	@ldisc: the line discipline
  *
  *	Set the discipline of a tty line. Must be called from a process
- *	context.
+ *	context. The ldisc change logic has to protect itself against any
+ *	overlapping ldisc change (including on the other end of pty pairs),
+ *	the close of one side of a tty/pty pair, and eventually hangup.
  *
- *	Locking: takes tty_ldisc_lock.
- *		 called functions take termios_mutex
+ *	Locking: takes tty_ldisc_lock, termios_mutex
  */
 
 int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 {
 	int retval;
-	struct tty_ldisc o_ldisc, new_ldisc;
-	int work;
-	unsigned long flags;
+	struct tty_ldisc *o_ldisc, *new_ldisc;
+	int work, o_work = 0;
 	struct tty_struct *o_tty;
 
-restart:
-	/* This is a bit ugly for now but means we can break the 'ldisc
-	   is part of the tty struct' assumption later */
-	retval = tty_ldisc_get(ldisc, &new_ldisc);
-	if (retval)
-		return retval;
+	new_ldisc = tty_ldisc_get(ldisc);
+	if (IS_ERR(new_ldisc))
+		return PTR_ERR(new_ldisc);
+
+	/*
+	 *	We need to look at the tty locking here for pty/tty pairs
+	 *	when both sides try to change in parallel.
+	 */
+
+	o_tty = tty->link;	/* o_tty is the pty side or NULL */
+
+
+	/*
+	 *	Check the no-op case
+	 */
+
+	if (tty->ldisc->ops->num == ldisc) {
+		tty_ldisc_put(new_ldisc);
+		return 0;
+	}
 
 	/*
 	 *	Problem: What do we do if this blocks ?
+	 *	We could deadlock here
 	 */
 
 	tty_wait_until_sent(tty, 0);
 
-	if (tty->ldisc.ops->num == ldisc) {
-		tty_ldisc_put(new_ldisc.ops);
-		return 0;
+	mutex_lock(&tty->ldisc_mutex);
+
+	/*
+	 *	We could be midstream of another ldisc change which has
+	 *	dropped the lock during processing. If so we need to wait.
+	 */
+
+	while (test_bit(TTY_LDISC_CHANGING, &tty->flags)) {
+		mutex_unlock(&tty->ldisc_mutex);
+		wait_event(tty_ldisc_wait,
+			test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0);
+		mutex_lock(&tty->ldisc_mutex);
 	}
+	set_bit(TTY_LDISC_CHANGING, &tty->flags);
 
 	/*
 	 *	No more input please, we are switching. The new ldisc
@@ -489,8 +616,6 @@ restart:
 	tty->receive_room = 0;
 
 	o_ldisc = tty->ldisc;
-	o_tty = tty->link;
-
 	/*
 	 *	Make sure we don't change while someone holds a
 	 *	reference to the line discipline. The TTY_LDISC bit
@@ -501,108 +626,181 @@ restart:
 	 *	with a userspace app continually trying to use the tty in
 	 *	parallel to the change and re-referencing the tty.
 	 */
-	clear_bit(TTY_LDISC, &tty->flags);
-	if (o_tty)
-		clear_bit(TTY_LDISC, &o_tty->flags);
 
-	spin_lock_irqsave(&tty_ldisc_lock, flags);
-	if (tty->ldisc.refcount || (o_tty && o_tty->ldisc.refcount)) {
-		if (tty->ldisc.refcount) {
-			/* Free the new ldisc we grabbed. Must drop the lock
-			   first. */
-			spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-			tty_ldisc_put(o_ldisc.ops);
-			/*
-			 * There are several reasons we may be busy, including
-			 * random momentary I/O traffic. We must therefore
-			 * retry. We could distinguish between blocking ops
-			 * and retries if we made tty_ldisc_wait() smarter.
-			 * That is up for discussion.
-			 */
-			if (wait_event_interruptible(tty_ldisc_wait, tty->ldisc.refcount == 0) < 0)
-				return -ERESTARTSYS;
-			goto restart;
-		}
-		if (o_tty && o_tty->ldisc.refcount) {
-			spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-			tty_ldisc_put(o_tty->ldisc.ops);
-			if (wait_event_interruptible(tty_ldisc_wait, o_tty->ldisc.refcount == 0) < 0)
-				return -ERESTARTSYS;
-			goto restart;
-		}
-	}
-	/*
-	 *	If the TTY_LDISC bit is set, then we are racing against
-	 *	another ldisc change
-	 */
-	if (test_bit(TTY_LDISC_CHANGING, &tty->flags)) {
-		struct tty_ldisc *ld;
-		spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-		tty_ldisc_put(new_ldisc.ops);
-		ld = tty_ldisc_ref_wait(tty);
-		tty_ldisc_deref(ld);
-		goto restart;
-	}
-	/*
-	 *	This flag is used to avoid two parallel ldisc changes. Once
-	 *	open and close are fine grained locked this may work better
-	 *	as a mutex shared with the open/close/hup paths
-	 */
-	set_bit(TTY_LDISC_CHANGING, &tty->flags);
+	work = tty_ldisc_halt(tty);
 	if (o_tty)
-		set_bit(TTY_LDISC_CHANGING, &o_tty->flags);
-	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-	
-	/*
-	 *	From this point on we know nobody has an ldisc
-	 *	usage reference, nor can they obtain one until
-	 *	we say so later on.
-	 */
+		o_work = tty_ldisc_halt(o_tty);
 
-	work = cancel_delayed_work(&tty->buf.work);
 	/*
-	 * Wait for ->hangup_work and ->buf.work handlers to terminate
-	 * MUST NOT hold locks here.
+	 * Wait for ->hangup_work and ->buf.work handlers to terminate.
+	 * We must drop the mutex here in case a hangup is also in process.
 	 */
+
+	mutex_unlock(&tty->ldisc_mutex);
+
 	flush_scheduled_work();
+
+	/* Let any existing reference holders finish */
+	retval = tty_ldisc_wait_idle(tty);
+	if (retval < 0) {
+		clear_bit(TTY_LDISC_CHANGING, &tty->flags);
+		tty_ldisc_put(new_ldisc);
+		return retval;
+	}
+
+	mutex_lock(&tty->ldisc_mutex);
+	if (test_bit(TTY_HUPPED, &tty->flags)) {
+		/* We were raced by the hangup method. It will have stomped
+		   the ldisc data and closed the ldisc down */
+		clear_bit(TTY_LDISC_CHANGING, &tty->flags);
+		mutex_unlock(&tty->ldisc_mutex);
+		tty_ldisc_put(new_ldisc);
+		return -EIO;
+	}
+
 	/* Shutdown the current discipline. */
-	if (o_ldisc.ops->close)
-		(o_ldisc.ops->close)(tty);
+	tty_ldisc_close(tty, o_ldisc);
 
 	/* Now set up the new line discipline. */
-	tty_ldisc_assign(tty, &new_ldisc);
+	tty_ldisc_assign(tty, new_ldisc);
 	tty_set_termios_ldisc(tty, ldisc);
-	if (new_ldisc.ops->open)
-		retval = (new_ldisc.ops->open)(tty);
+
+	retval = tty_ldisc_open(tty, new_ldisc);
 	if (retval < 0) {
-		tty_ldisc_put(new_ldisc.ops);
-		tty_ldisc_restore(tty, &o_ldisc);
+		/* Back to the old one or N_TTY if we can't */
+		tty_ldisc_put(new_ldisc);
+		tty_ldisc_restore(tty, o_ldisc);
 	}
+
 	/* At this point we hold a reference to the new ldisc and a
 	   a reference to the old ldisc. If we ended up flipping back
 	   to the existing ldisc we have two references to it */
 
-	if (tty->ldisc.ops->num != o_ldisc.ops->num && tty->ops->set_ldisc)
+	if (tty->ldisc->ops->num != o_ldisc->ops->num && tty->ops->set_ldisc)
 		tty->ops->set_ldisc(tty);
 
-	tty_ldisc_put(o_ldisc.ops);
+	tty_ldisc_put(o_ldisc);
 
 	/*
-	 *	Allow ldisc referencing to occur as soon as the driver
-	 *	ldisc callback completes.
+	 *	Allow ldisc referencing to occur again
 	 */
 
 	tty_ldisc_enable(tty);
 	if (o_tty)
 		tty_ldisc_enable(o_tty);
 
-	/* Restart it in case no characters kick it off. Safe if
+	/* Restart the work queue in case no characters kick it off. Safe if
 	   already running */
 	if (work)
 		schedule_delayed_work(&tty->buf.work, 1);
+	if (o_work)
+		schedule_delayed_work(&o_tty->buf.work, 1);
+	mutex_unlock(&tty->ldisc_mutex);
 	return retval;
 }
 
+/**
+ *	tty_reset_termios	-	reset terminal state
+ *	@tty: tty to reset
+ *
+ *	Restore a terminal to the driver default state.
+ */
+
+static void tty_reset_termios(struct tty_struct *tty)
+{
+	mutex_lock(&tty->termios_mutex);
+	*tty->termios = tty->driver->init_termios;
+	tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
+	tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
+	mutex_unlock(&tty->termios_mutex);
+}
+
+
+/**
+ *	tty_ldisc_reinit	-	reinitialise the tty ldisc
+ *	@tty: tty to reinit
+ *
+ *	Switch the tty back to N_TTY line discipline and leave the
+ *	ldisc state closed
+ */
+
+static void tty_ldisc_reinit(struct tty_struct *tty)
+{
+	struct tty_ldisc *ld;
+
+	tty_ldisc_close(tty, tty->ldisc);
+	tty_ldisc_put(tty->ldisc);
+	tty->ldisc = NULL;
+	/*
+	 *	Switch the line discipline back
+	 */
+	ld = tty_ldisc_get(N_TTY);
+	BUG_ON(IS_ERR(ld));
+	tty_ldisc_assign(tty, ld);
+	tty_set_termios_ldisc(tty, N_TTY);
+}
+
+/**
+ *	tty_ldisc_hangup		-	hangup ldisc reset
+ *	@tty: tty being hung up
+ *
+ *	Some tty devices reset their termios when they receive a hangup
+ *	event. In that situation we must also switch back to N_TTY properly
+ *	before we reset the termios data.
+ *
+ *	Locking: We can take the ldisc mutex as the rest of the code is
+ *	careful to allow for this.
+ *
+ *	In the pty pair case this occurs in the close() path of the
+ *	tty itself so we must be careful about locking rules.
+ */
+
+void tty_ldisc_hangup(struct tty_struct *tty)
+{
+	struct tty_ldisc *ld;
+
+	/*
+	 * FIXME! What are the locking issues here? This may me overdoing
+	 * things... This question is especially important now that we've
+	 * removed the irqlock.
+	 */
+	ld = tty_ldisc_ref(tty);
+	if (ld != NULL) {
+		/* We may have no line discipline at this point */
+		if (ld->ops->flush_buffer)
+			ld->ops->flush_buffer(tty);
+		tty_driver_flush_buffer(tty);
+		if ((test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) &&
+		    ld->ops->write_wakeup)
+			ld->ops->write_wakeup(tty);
+		if (ld->ops->hangup)
+			ld->ops->hangup(tty);
+		tty_ldisc_deref(ld);
+	}
+	/*
+	 * FIXME: Once we trust the LDISC code better we can wait here for
+	 * ldisc completion and fix the driver call race
+	 */
+	wake_up_interruptible_poll(&tty->write_wait, POLLOUT);
+	wake_up_interruptible_poll(&tty->read_wait, POLLIN);
+	/*
+	 * Shutdown the current line discipline, and reset it to
+	 * N_TTY.
+	 */
+	if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
+		/* Avoid racing set_ldisc */
+		mutex_lock(&tty->ldisc_mutex);
+		/* Switch back to N_TTY */
+		tty_ldisc_reinit(tty);
+		/* At this point we have a closed ldisc and we want to
+		   reopen it. We could defer this to the next open but
+		   it means auditing a lot of other paths so this is a FIXME */
+		WARN_ON(tty_ldisc_open(tty, tty->ldisc));
+		tty_ldisc_enable(tty);
+		mutex_unlock(&tty->ldisc_mutex);
+		tty_reset_termios(tty);
+	}
+}
 
 /**
  *	tty_ldisc_setup			-	open line discipline
@@ -610,24 +808,23 @@ restart:
  *	@o_tty: pair tty for pty/tty pairs
  *
  *	Called during the initial open of a tty/pty pair in order to set up the
- *	line discplines and bind them to the tty.
+ *	line disciplines and bind them to the tty. This has no locking issues
+ *	as the device isn't yet active.
  */
 
 int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty)
 {
-	struct tty_ldisc *ld = &tty->ldisc;
+	struct tty_ldisc *ld = tty->ldisc;
 	int retval;
 
-	if (ld->ops->open) {
-		retval = (ld->ops->open)(tty);
-		if (retval)
-			return retval;
-	}
-	if (o_tty && o_tty->ldisc.ops->open) {
-		retval = (o_tty->ldisc.ops->open)(o_tty);
+	retval = tty_ldisc_open(tty, ld);
+	if (retval)
+		return retval;
+
+	if (o_tty) {
+		retval = tty_ldisc_open(o_tty, o_tty->ldisc);
 		if (retval) {
-			if (ld->ops->close)
-				(ld->ops->close)(tty);
+			tty_ldisc_close(tty, ld);
 			return retval;
 		}
 		tty_ldisc_enable(o_tty);
@@ -635,32 +832,25 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty)
 	tty_ldisc_enable(tty);
 	return 0;
 }
-
 /**
  *	tty_ldisc_release		-	release line discipline
  *	@tty: tty being shut down
  *	@o_tty: pair tty for pty/tty pairs
  *
- *	Called during the final close of a tty/pty pair in order to shut down the
- *	line discpline layer.
+ *	Called during the final close of a tty/pty pair in order to shut down
+ *	the line discpline layer. On exit the ldisc assigned is N_TTY and the
+ *	ldisc has not been opened.
  */
 
 void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
 {
-	unsigned long flags;
-	struct tty_ldisc ld;
 	/*
 	 * Prevent flush_to_ldisc() from rescheduling the work for later.  Then
 	 * kill any delayed work. As this is the final close it does not
 	 * race with the set_ldisc code path.
 	 */
-	clear_bit(TTY_LDISC, &tty->flags);
-	cancel_delayed_work(&tty->buf.work);
-
-	/*
-	 * Wait for ->hangup_work and ->buf.work handlers to terminate
-	 */
 
+	tty_ldisc_halt(tty);
 	flush_scheduled_work();
 
 	/*
@@ -668,38 +858,19 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
 	 * side waiters as the file is closing so user count on the file
 	 * side is zero.
 	 */
-	spin_lock_irqsave(&tty_ldisc_lock, flags);
-	while (tty->ldisc.refcount) {
-		spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-		wait_event(tty_ldisc_wait, tty->ldisc.refcount == 0);
-		spin_lock_irqsave(&tty_ldisc_lock, flags);
-	}
-	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+
+	tty_ldisc_wait_idle(tty);
+
 	/*
 	 * Shutdown the current line discipline, and reset it to N_TTY.
 	 *
 	 * FIXME: this MUST get fixed for the new reflocking
 	 */
-	if (tty->ldisc.ops->close)
-		(tty->ldisc.ops->close)(tty);
-	tty_ldisc_put(tty->ldisc.ops);
 
-	/*
-	 *	Switch the line discipline back
-	 */
-	WARN_ON(tty_ldisc_get(N_TTY, &ld));
-	tty_ldisc_assign(tty, &ld);
-	tty_set_termios_ldisc(tty, N_TTY);
-	if (o_tty) {
-		/* FIXME: could o_tty be in setldisc here ? */
-		clear_bit(TTY_LDISC, &o_tty->flags);
-		if (o_tty->ldisc.ops->close)
-			(o_tty->ldisc.ops->close)(o_tty);
-		tty_ldisc_put(o_tty->ldisc.ops);
-		WARN_ON(tty_ldisc_get(N_TTY, &ld));
-		tty_ldisc_assign(o_tty, &ld);
-		tty_set_termios_ldisc(o_tty, N_TTY);
-	}
+	tty_ldisc_reinit(tty);
+	/* This will need doing differently if we need to lock */
+	if (o_tty)
+		tty_ldisc_release(o_tty, NULL);
 }
 
 /**
@@ -712,10 +883,10 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
 
 void tty_ldisc_init(struct tty_struct *tty)
 {
-	struct tty_ldisc ld;
-	if (tty_ldisc_get(N_TTY, &ld) < 0)
+	struct tty_ldisc *ld = tty_ldisc_get(N_TTY);
+	if (IS_ERR(ld))
 		panic("n_tty: init_tty");
-	tty_ldisc_assign(tty, &ld);
+	tty_ldisc_assign(tty, ld);
 }
 
 void tty_ldisc_begin(void)

drivers/char/tty_port.c

@@ -137,7 +137,7 @@ int tty_port_carrier_raised(struct tty_port *port)
 EXPORT_SYMBOL(tty_port_carrier_raised);
 
 /**
- *	tty_port_raise_dtr_rts	-	Riase DTR/RTS
+ *	tty_port_raise_dtr_rts	-	Raise DTR/RTS
  *	@port: tty port
  *
  *	Wrapper for the DTR/RTS raise logic. For the moment this is used
@@ -147,11 +147,27 @@ EXPORT_SYMBOL(tty_port_carrier_raised);
 
 void tty_port_raise_dtr_rts(struct tty_port *port)
 {
-	if (port->ops->raise_dtr_rts)
-		port->ops->raise_dtr_rts(port);
+	if (port->ops->dtr_rts)
+		port->ops->dtr_rts(port, 1);
 }
 EXPORT_SYMBOL(tty_port_raise_dtr_rts);
 
+/**
+ *	tty_port_lower_dtr_rts	-	Lower DTR/RTS
+ *	@port: tty port
+ *
+ *	Wrapper for the DTR/RTS raise logic. For the moment this is used
+ *	to hide some internal details. This will eventually become entirely
+ *	internal to the tty port.
+ */
+
+void tty_port_lower_dtr_rts(struct tty_port *port)
+{
+	if (port->ops->dtr_rts)
+		port->ops->dtr_rts(port, 0);
+}
+EXPORT_SYMBOL(tty_port_lower_dtr_rts);
+
 /**
  *	tty_port_block_til_ready	-	Waiting logic for tty open
  *	@port: the tty port being opened
@@ -167,7 +183,7 @@ EXPORT_SYMBOL(tty_port_raise_dtr_rts);
  *		- port flags and counts
  *
  *	The passed tty_port must implement the carrier_raised method if it can
- *	do carrier detect and the raise_dtr_rts method if it supports software
+ *	do carrier detect and the dtr_rts method if it supports software
  *	management of these lines. Note that the dtr/rts raise is done each
  *	iteration as a hangup may have previously dropped them while we wait.
  */
@@ -182,7 +198,8 @@ int tty_port_block_til_ready(struct tty_port *port,
 
 	/* block if port is in the process of being closed */
 	if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
-		interruptible_sleep_on(&port->close_wait);
+		wait_event_interruptible(port->close_wait,
+				!(port->flags & ASYNC_CLOSING));
 		if (port->flags & ASYNC_HUP_NOTIFY)
 			return -EAGAIN;
 		else
@@ -205,7 +222,6 @@ int tty_port_block_til_ready(struct tty_port *port,
 	   before the next open may complete */
 
 	retval = 0;
-	add_wait_queue(&port->open_wait, &wait);
 
 	/* The port lock protects the port counts */
 	spin_lock_irqsave(&port->lock, flags);
@@ -219,7 +235,7 @@ int tty_port_block_til_ready(struct tty_port *port,
 		if (tty->termios->c_cflag & CBAUD)
 			tty_port_raise_dtr_rts(port);
 
-		set_current_state(TASK_INTERRUPTIBLE);
+		prepare_to_wait(&port->open_wait, &wait, TASK_INTERRUPTIBLE);
 		/* Check for a hangup or uninitialised port. Return accordingly */
 		if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) {
 			if (port->flags & ASYNC_HUP_NOTIFY)
@@ -240,8 +256,7 @@ int tty_port_block_til_ready(struct tty_port *port,
 		}
 		schedule();
 	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&port->open_wait, &wait);
+	finish_wait(&port->open_wait, &wait);
 
 	/* Update counts. A parallel hangup will have set count to zero and
 	   we must not mess that up further */
@@ -292,6 +307,17 @@ int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct f
 	if (port->flags & ASYNC_INITIALIZED &&
 			port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
 		tty_wait_until_sent(tty, port->closing_wait);
+	if (port->drain_delay) {
+		unsigned int bps = tty_get_baud_rate(tty);
+		long timeout;
+
+		if (bps > 1200)
+			timeout = max_t(long, (HZ * 10 * port->drain_delay) / bps,
+								HZ / 10);
+		else
+			timeout = 2 * HZ;
+		schedule_timeout_interruptible(timeout);
+	}
 	return 1;
 }
 EXPORT_SYMBOL(tty_port_close_start);
@@ -302,6 +328,9 @@ void tty_port_close_end(struct tty_port *port, struct tty_struct *tty)
 
 	tty_ldisc_flush(tty);
 
+	if (tty->termios->c_cflag & HUPCL)
+		tty_port_lower_dtr_rts(port);
+
 	spin_lock_irqsave(&port->lock, flags);
 	tty->closing = 0;
 

drivers/serial/8250.c

@@ -287,6 +287,13 @@ static const struct serial8250_config uart_config[] = {
 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
 		.flags		= UART_CAP_FIFO,
 	},
+	[PORT_AR7] = {
+		.name		= "AR7",
+		.fifo_size	= 16,
+		.tx_loadsz	= 16,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
+		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
+	},
 };
 
 #if defined (CONFIG_SERIAL_8250_AU1X00)

drivers/serial/8250_pci.c

@@ -2776,6 +2776,9 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{	PCI_VENDOR_ID_OXSEMI, 0x950a,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_2_1130000 },
+	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_C950,
+		PCI_VENDOR_ID_OXSEMI, PCI_SUBDEVICE_ID_OXSEMI_C950, 0, 0,
+		pbn_b0_1_921600 },
 	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_4_115200 },

drivers/serial/Kconfig

@@ -833,6 +833,7 @@ config SERIAL_IMX
 	bool "IMX serial port support"
 	depends on ARM && (ARCH_IMX || ARCH_MXC)
 	select SERIAL_CORE
+	select RATIONAL
 	help
 	  If you have a machine based on a Motorola IMX CPU you
 	  can enable its onboard serial port by enabling this option.
@@ -1433,4 +1434,11 @@ config SPORT_BAUD_RATE
 	default 19200 if (SERIAL_SPORT_BAUD_RATE_19200)
 	default 9600 if (SERIAL_SPORT_BAUD_RATE_9600)
 
+config SERIAL_TIMBERDALE
+	tristate "Support for timberdale UART"
+	depends on MFD_TIMBERDALE
+	select SERIAL_CORE
+	---help---
+	Add support for UART controller on timberdale.
+
 endmenu

drivers/serial/Makefile

@@ -77,3 +77,4 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
 obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
 obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
 obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
+obj-$(CONFIG_SERIAL_TIMBERDALE)	+= timbuart.o

drivers/serial/bfin_5xx.c

@@ -330,6 +330,11 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
 		/* Clear TFI bit */
 		UART_PUT_LSR(uart, TFI);
 #endif
+		/* Anomaly notes:
+		 *  05000215 -	we always clear ETBEI within last UART TX
+		 *		interrupt to end a string. It is always set
+		 *		when start a new tx.
+		 */
 		UART_CLEAR_IER(uart, ETBEI);
 		return;
 	}
@@ -415,6 +420,7 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
 	set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail));
 	set_dma_x_count(uart->tx_dma_channel, uart->tx_count);
 	set_dma_x_modify(uart->tx_dma_channel, 1);
+	SSYNC();
 	enable_dma(uart->tx_dma_channel);
 
 	UART_SET_IER(uart, ETBEI);
@@ -473,27 +479,41 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
 void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
 {
 	int x_pos, pos;
-	unsigned long flags;
-
-	spin_lock_irqsave(&uart->port.lock, flags);
 
+	dma_disable_irq(uart->rx_dma_channel);
+	spin_lock_bh(&uart->port.lock);
+
+	/* 2D DMA RX buffer ring is used. Because curr_y_count and
+	 * curr_x_count can't be read as an atomic operation,
+	 * curr_y_count should be read before curr_x_count. When
+	 * curr_x_count is read, curr_y_count may already indicate
+	 * next buffer line. But, the position calculated here is
+	 * still indicate the old line. The wrong position data may
+	 * be smaller than current buffer tail, which cause garbages
+	 * are received if it is not prohibit.
+	 */
 	uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel);
 	x_pos = get_dma_curr_xcount(uart->rx_dma_channel);
 	uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows;
-	if (uart->rx_dma_nrows == DMA_RX_YCOUNT)
+	if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0)
 		uart->rx_dma_nrows = 0;
 	x_pos = DMA_RX_XCOUNT - x_pos;
 	if (x_pos == DMA_RX_XCOUNT)
 		x_pos = 0;
 
 	pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos;
-	if (pos != uart->rx_dma_buf.tail) {
+	/* Ignore receiving data if new position is in the same line of
+	 * current buffer tail and small.
+	 */
+	if (pos > uart->rx_dma_buf.tail ||
+		uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) {
 		uart->rx_dma_buf.head = pos;
 		bfin_serial_dma_rx_chars(uart);
 		uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
 	}
 
-	spin_unlock_irqrestore(&uart->port.lock, flags);
+	spin_unlock_bh(&uart->port.lock);
+	dma_enable_irq(uart->rx_dma_channel);
 
 	mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES);
 }
@@ -514,6 +534,11 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
 	if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) {
 		disable_dma(uart->tx_dma_channel);
 		clear_dma_irqstat(uart->tx_dma_channel);
+		/* Anomaly notes:
+		 *  05000215 -	we always clear ETBEI within last UART TX
+		 *		interrupt to end a string. It is always set
+		 *		when start a new tx.
+		 */
 		UART_CLEAR_IER(uart, ETBEI);
 		xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
 		uart->port.icount.tx += uart->tx_count;
@@ -532,11 +557,26 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)
 {
 	struct bfin_serial_port *uart = dev_id;
 	unsigned short irqstat;
+	int x_pos, pos;
 
 	spin_lock(&uart->port.lock);
 	irqstat = get_dma_curr_irqstat(uart->rx_dma_channel);
 	clear_dma_irqstat(uart->rx_dma_channel);
-	bfin_serial_dma_rx_chars(uart);
+
+	uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel);
+	x_pos = get_dma_curr_xcount(uart->rx_dma_channel);
+	uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows;
+	if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0)
+		uart->rx_dma_nrows = 0;
+
+	pos = uart->rx_dma_nrows * DMA_RX_XCOUNT;
+	if (pos > uart->rx_dma_buf.tail ||
+		uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) {
+		uart->rx_dma_buf.head = pos;
+		bfin_serial_dma_rx_chars(uart);
+		uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
+	}
+
 	spin_unlock(&uart->port.lock);
 
 	return IRQ_HANDLED;
@@ -789,8 +829,16 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 			__func__);
 	}
 
-	if (termios->c_cflag & CSTOPB)
-		lcr |= STB;
+	/* Anomaly notes:
+	 *  05000231 -  STOP bit is always set to 1 whatever the user is set.
+	 */
+	if (termios->c_cflag & CSTOPB) {
+		if (ANOMALY_05000231)
+			printk(KERN_WARNING "STOP bits other than 1 is not "
+				"supported in case of anomaly 05000231.\n");
+		else
+			lcr |= STB;
+	}
 	if (termios->c_cflag & PARENB)
 		lcr |= PEN;
 	if (!(termios->c_cflag & PARODD))
@@ -940,6 +988,10 @@ static void bfin_serial_reset_irda(struct uart_port *port)
 }
 
 #ifdef CONFIG_CONSOLE_POLL
+/* Anomaly notes:
+ *  05000099 -  Because we only use THRE in poll_put and DR in poll_get,
+ *		losing other bits of UART_LSR is not a problem here.
+ */
 static void bfin_serial_poll_put_char(struct uart_port *port, unsigned char chr)
 {
 	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
@@ -1245,12 +1297,17 @@ static __init void early_serial_write(struct console *con, const char *s,
 	}
 }
 
+/*
+ * This should have a .setup or .early_setup in it, but then things get called
+ * without the command line options, and the baud rate gets messed up - so
+ * don't let the common infrastructure play with things. (see calls to setup
+ * & earlysetup in ./kernel/printk.c:register_console()
+ */
 static struct __initdata console bfin_early_serial_console = {
 	.name = "early_BFuart",
 	.write = early_serial_write,
 	.device = uart_console_device,
 	.flags = CON_PRINTBUFFER,
-	.setup = bfin_serial_console_setup,
 	.index = -1,
 	.data  = &bfin_serial_reg,
 };

drivers/serial/bfin_sport_uart.c

@@ -101,15 +101,16 @@ static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value)
 {
 	pr_debug("%s value:%x\n", __func__, value);
 	/* Place a Start and Stop bit */
-	__asm__ volatile (
-		"R2 = b#01111111100;\n\t"
-		"R3 = b#10000000001;\n\t"
-		"%0 <<= 2;\n\t"
-		"%0 = %0 & R2;\n\t"
-		"%0 = %0 | R3;\n\t"
-		:"=r"(value)
-		:"0"(value)
-		:"R2", "R3");
+	__asm__ __volatile__ (
+		"R2 = b#01111111100;"
+		"R3 = b#10000000001;"
+		"%0 <<= 2;"
+		"%0 = %0 & R2;"
+		"%0 = %0 | R3;"
+		: "=d"(value)
+		: "d"(value)
+		: "ASTAT", "R2", "R3"
+	);
 	pr_debug("%s value:%x\n", __func__, value);
 
 	SPORT_PUT_TX(up, value);
@@ -118,27 +119,30 @@ static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value)
 static inline unsigned int rx_one_byte(struct sport_uart_port *up)
 {
 	unsigned int value, extract;
+	u32 tmp_mask1, tmp_mask2, tmp_shift, tmp;
 
 	value = SPORT_GET_RX32(up);
 	pr_debug("%s value:%x\n", __func__, value);
 
 	/* Extract 8 bits data */
-	__asm__ volatile (
-		"R5 = 0;\n\t"
-		"P0 = 8;\n\t"
-		"R1 = 0x1801(Z);\n\t"
-		"R3 = 0x0300(Z);\n\t"
-		"R4 = 0;\n\t"
-		"LSETUP(loop_s, loop_e) LC0 = P0;\nloop_s:\t"
-		"R2 = extract(%1, R1.L)(Z);\n\t"
-		"R2 <<= R4;\n\t"
-		"R5 = R5 | R2;\n\t"
-		"R1 = R1 - R3;\nloop_e:\t"
-		"R4 += 1;\n\t"
-		"%0 = R5;\n\t"
-		:"=r"(extract)
-		:"r"(value)
-		:"P0", "R1", "R2","R3","R4", "R5");
+	__asm__ __volatile__ (
+		"%[extr] = 0;"
+		"%[mask1] = 0x1801(Z);"
+		"%[mask2] = 0x0300(Z);"
+		"%[shift] = 0;"
+		"LSETUP(.Lloop_s, .Lloop_e) LC0 = %[lc];"
+		".Lloop_s:"
+		"%[tmp] = extract(%[val], %[mask1].L)(Z);"
+		"%[tmp] <<= %[shift];"
+		"%[extr] = %[extr] | %[tmp];"
+		"%[mask1] = %[mask1] - %[mask2];"
+		".Lloop_e:"
+		"%[shift] += 1;"
+		: [val]"=d"(value), [extr]"=d"(extract), [shift]"=d"(tmp_shift), [tmp]"=d"(tmp),
+		  [mask1]"=d"(tmp_mask1), [mask2]"=d"(tmp_mask2)
+		: "d"(value), [lc]"a"(8)
+		: "ASTAT", "LB0", "LC0", "LT0"
+	);
 
 	pr_debug("	extract:%x\n", extract);
 	return extract;
@@ -149,7 +153,7 @@ static int sport_uart_setup(struct sport_uart_port *up, int sclk, int baud_rate)
 	int tclkdiv, tfsdiv, rclkdiv;
 
 	/* Set TCR1 and TCR2 */
-	SPORT_PUT_TCR1(up, (LTFS | ITFS | TFSR | TLSBIT | ITCLK));
+	SPORT_PUT_TCR1(up, (LATFS | ITFS | TFSR | TLSBIT | ITCLK));
 	SPORT_PUT_TCR2(up, 10);
 	pr_debug("%s TCR1:%x, TCR2:%x\n", __func__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up));
 
@@ -419,7 +423,7 @@ static void sport_shutdown(struct uart_port *port)
 }
 
 static void sport_set_termios(struct uart_port *port,
-		struct termios *termios, struct termios *old)
+		struct ktermios *termios, struct ktermios *old)
 {
 	pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag);
 	uart_update_timeout(port, CS8 ,port->uartclk);

drivers/serial/icom.c

@@ -137,7 +137,12 @@ static LIST_HEAD(icom_adapter_head);
 static spinlock_t icom_lock;
 
 #ifdef ICOM_TRACE
-static inline void trace(struct icom_port *, char *, unsigned long) {};
+static inline void trace(struct icom_port *icom_port, char *trace_pt,
+			unsigned long trace_data)
+{
+	dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n",
+	icom_port->port, trace_pt, trace_data);
+}
 #else
 static inline void trace(struct icom_port *icom_port, char *trace_pt, unsigned long trace_data) {};
 #endif
@@ -408,7 +413,7 @@ static void load_code(struct icom_port *icom_port)
 	release_firmware(fw);
 
 	/* Set Hardware level */
-	if ((icom_port->adapter->version | ADAPTER_V2) == ADAPTER_V2)
+	if (icom_port->adapter->version == ADAPTER_V2)
 		writeb(V2_HARDWARE, &(icom_port->dram->misc_flags));
 
 	/* Start the processor in Adapter */
@@ -861,7 +866,7 @@ static irqreturn_t icom_interrupt(int irq, void *dev_id)
 	/* find icom_port for this interrupt */
 	icom_adapter = (struct icom_adapter *) dev_id;
 
-	if ((icom_adapter->version | ADAPTER_V2) == ADAPTER_V2) {
+	if (icom_adapter->version == ADAPTER_V2) {
 		int_reg = icom_adapter->base_addr + 0x8024;
 
 		adapter_interrupts = readl(int_reg);
@@ -1647,15 +1652,6 @@ static void __exit icom_exit(void)
 module_init(icom_init);
 module_exit(icom_exit);
 
-#ifdef ICOM_TRACE
-static inline void trace(struct icom_port *icom_port, char *trace_pt,
-		  unsigned long trace_data)
-{
-	dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n",
-		 icom_port->port, trace_pt, trace_data);
-}
-#endif
-
 MODULE_AUTHOR("Michael Anderson <mjanders@us.ibm.com>");
 MODULE_DESCRIPTION("IBM iSeries Serial IOA driver");
 MODULE_SUPPORTED_DEVICE

drivers/serial/imx.c

@@ -8,6 +8,9 @@
  *  Author: Sascha Hauer <sascha@saschahauer.de>
  *  Copyright (C) 2004 Pengutronix
  *
+ *  Copyright (C) 2009 emlix GmbH
+ *  Author: Fabian Godehardt (added IrDA support for iMX)
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -41,6 +44,8 @@
 #include <linux/serial_core.h>
 #include <linux/serial.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/rational.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -148,6 +153,7 @@
 #define  UCR4_DREN  	 (1<<0)  /* Recv data ready interrupt enable */
 #define  UFCR_RXTL_SHF   0       /* Receiver trigger level shift */
 #define  UFCR_RFDIV      (7<<7)  /* Reference freq divider mask */
+#define  UFCR_RFDIV_REG(x)	(((x) < 7 ? 6 - (x) : 6) << 7)
 #define  UFCR_TXTL_SHF   10      /* Transmitter trigger level shift */
 #define  USR1_PARITYERR  (1<<15) /* Parity error interrupt flag */
 #define  USR1_RTSS  	 (1<<14) /* RTS pin status */
@@ -211,10 +217,20 @@ struct imx_port {
 	struct timer_list	timer;
 	unsigned int		old_status;
 	int			txirq,rxirq,rtsirq;
-	int			have_rtscts:1;
+	unsigned int		have_rtscts:1;
+	unsigned int		use_irda:1;
+	unsigned int		irda_inv_rx:1;
+	unsigned int		irda_inv_tx:1;
+	unsigned short		trcv_delay; /* transceiver delay */
 	struct clk		*clk;
 };
 
+#ifdef CONFIG_IRDA
+#define USE_IRDA(sport)	((sport)->use_irda)
+#else
+#define USE_IRDA(sport)	(0)
+#endif
+
 /*
  * Handle any change of modem status signal since we were last called.
  */
@@ -268,6 +284,48 @@ static void imx_stop_tx(struct uart_port *port)
 	struct imx_port *sport = (struct imx_port *)port;
 	unsigned long temp;
 
+	if (USE_IRDA(sport)) {
+		/* half duplex - wait for end of transmission */
+		int n = 256;
+		while ((--n > 0) &&
+		      !(readl(sport->port.membase + USR2) & USR2_TXDC)) {
+			udelay(5);
+			barrier();
+		}
+		/*
+		 * irda transceiver - wait a bit more to avoid
+		 * cutoff, hardware dependent
+		 */
+		udelay(sport->trcv_delay);
+
+		/*
+		 * half duplex - reactivate receive mode,
+		 * flush receive pipe echo crap
+		 */
+		if (readl(sport->port.membase + USR2) & USR2_TXDC) {
+			temp = readl(sport->port.membase + UCR1);
+			temp &= ~(UCR1_TXMPTYEN | UCR1_TRDYEN);
+			writel(temp, sport->port.membase + UCR1);
+
+			temp = readl(sport->port.membase + UCR4);
+			temp &= ~(UCR4_TCEN);
+			writel(temp, sport->port.membase + UCR4);
+
+			while (readl(sport->port.membase + URXD0) &
+			       URXD_CHARRDY)
+				barrier();
+
+			temp = readl(sport->port.membase + UCR1);
+			temp |= UCR1_RRDYEN;
+			writel(temp, sport->port.membase + UCR1);
+
+			temp = readl(sport->port.membase + UCR4);
+			temp |= UCR4_DREN;
+			writel(temp, sport->port.membase + UCR4);
+		}
+		return;
+	}
+
 	temp = readl(sport->port.membase + UCR1);
 	writel(temp & ~UCR1_TXMPTYEN, sport->port.membase + UCR1);
 }
@@ -302,13 +360,15 @@ static inline void imx_transmit_buffer(struct imx_port *sport)
 		/* send xmit->buf[xmit->tail]
 		 * out the port here */
 		writel(xmit->buf[xmit->tail], sport->port.membase + URTX0);
-		xmit->tail = (xmit->tail + 1) &
-		         (UART_XMIT_SIZE - 1);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 		sport->port.icount.tx++;
 		if (uart_circ_empty(xmit))
 			break;
 	}
 
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(&sport->port);
+
 	if (uart_circ_empty(xmit))
 		imx_stop_tx(&sport->port);
 }
@@ -321,9 +381,30 @@ static void imx_start_tx(struct uart_port *port)
 	struct imx_port *sport = (struct imx_port *)port;
 	unsigned long temp;
 
+	if (USE_IRDA(sport)) {
+		/* half duplex in IrDA mode; have to disable receive mode */
+		temp = readl(sport->port.membase + UCR4);
+		temp &= ~(UCR4_DREN);
+		writel(temp, sport->port.membase + UCR4);
+
+		temp = readl(sport->port.membase + UCR1);
+		temp &= ~(UCR1_RRDYEN);
+		writel(temp, sport->port.membase + UCR1);
+	}
+
 	temp = readl(sport->port.membase + UCR1);
 	writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1);
 
+	if (USE_IRDA(sport)) {
+		temp = readl(sport->port.membase + UCR1);
+		temp |= UCR1_TRDYEN;
+		writel(temp, sport->port.membase + UCR1);
+
+		temp = readl(sport->port.membase + UCR4);
+		temp |= UCR4_TCEN;
+		writel(temp, sport->port.membase + UCR4);
+	}
+
 	if (readl(sport->port.membase + UTS) & UTS_TXEMPTY)
 		imx_transmit_buffer(sport);
 }
@@ -395,8 +476,7 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
 				continue;
 		}
 
-		if (uart_handle_sysrq_char
-		            (&sport->port, (unsigned char)rx))
+		if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx))
 			continue;
 
 		if (rx & (URXD_PRERR | URXD_OVRRUN | URXD_FRMERR) ) {
@@ -471,26 +551,26 @@ static unsigned int imx_tx_empty(struct uart_port *port)
  */
 static unsigned int imx_get_mctrl(struct uart_port *port)
 {
-        struct imx_port *sport = (struct imx_port *)port;
-        unsigned int tmp = TIOCM_DSR | TIOCM_CAR;
+	struct imx_port *sport = (struct imx_port *)port;
+	unsigned int tmp = TIOCM_DSR | TIOCM_CAR;
 
-        if (readl(sport->port.membase + USR1) & USR1_RTSS)
-                tmp |= TIOCM_CTS;
+	if (readl(sport->port.membase + USR1) & USR1_RTSS)
+		tmp |= TIOCM_CTS;
 
-        if (readl(sport->port.membase + UCR2) & UCR2_CTS)
-                tmp |= TIOCM_RTS;
+	if (readl(sport->port.membase + UCR2) & UCR2_CTS)
+		tmp |= TIOCM_RTS;
 
-        return tmp;
+	return tmp;
 }
 
 static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
-        struct imx_port *sport = (struct imx_port *)port;
+	struct imx_port *sport = (struct imx_port *)port;
 	unsigned long temp;
 
 	temp = readl(sport->port.membase + UCR2) & ~UCR2_CTS;
 
-        if (mctrl & TIOCM_RTS)
+	if (mctrl & TIOCM_RTS)
 		temp |= UCR2_CTS;
 
 	writel(temp, sport->port.membase + UCR2);
@@ -534,12 +614,7 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
 	if(!ufcr_rfdiv)
 		ufcr_rfdiv = 1;
 
-	if(ufcr_rfdiv >= 7)
-		ufcr_rfdiv = 6;
-	else
-		ufcr_rfdiv = 6 - ufcr_rfdiv;
-
-	val |= UFCR_RFDIV & (ufcr_rfdiv << 7);
+	val |= UFCR_RFDIV_REG(ufcr_rfdiv);
 
 	writel(val, sport->port.membase + UFCR);
 
@@ -558,8 +633,24 @@ static int imx_startup(struct uart_port *port)
 	 * requesting IRQs
 	 */
 	temp = readl(sport->port.membase + UCR4);
+
+	if (USE_IRDA(sport))
+		temp |= UCR4_IRSC;
+
 	writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
 
+	if (USE_IRDA(sport)) {
+		/* reset fifo's and state machines */
+		int i = 100;
+		temp = readl(sport->port.membase + UCR2);
+		temp &= ~UCR2_SRST;
+		writel(temp, sport->port.membase + UCR2);
+		while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) &&
+		    (--i > 0)) {
+			udelay(1);
+		}
+	}
+
 	/*
 	 * Allocate the IRQ(s) i.MX1 has three interrupts whereas later
 	 * chips only have one interrupt.
@@ -575,12 +666,16 @@ static int imx_startup(struct uart_port *port)
 		if (retval)
 			goto error_out2;
 
-		retval = request_irq(sport->rtsirq, imx_rtsint,
-			     (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
-			       IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-				DRIVER_NAME, sport);
-		if (retval)
-			goto error_out3;
+		/* do not use RTS IRQ on IrDA */
+		if (!USE_IRDA(sport)) {
+			retval = request_irq(sport->rtsirq, imx_rtsint,
+				     (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
+				       IRQF_TRIGGER_FALLING |
+				       IRQF_TRIGGER_RISING,
+					DRIVER_NAME, sport);
+			if (retval)
+				goto error_out3;
+		}
 	} else {
 		retval = request_irq(sport->port.irq, imx_int, 0,
 				DRIVER_NAME, sport);
@@ -597,18 +692,49 @@ static int imx_startup(struct uart_port *port)
 
 	temp = readl(sport->port.membase + UCR1);
 	temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN;
+
+	if (USE_IRDA(sport)) {
+		temp |= UCR1_IREN;
+		temp &= ~(UCR1_RTSDEN);
+	}
+
 	writel(temp, sport->port.membase + UCR1);
 
 	temp = readl(sport->port.membase + UCR2);
 	temp |= (UCR2_RXEN | UCR2_TXEN);
 	writel(temp, sport->port.membase + UCR2);
 
+	if (USE_IRDA(sport)) {
+		/* clear RX-FIFO */
+		int i = 64;
+		while ((--i > 0) &&
+			(readl(sport->port.membase + URXD0) & URXD_CHARRDY)) {
+			barrier();
+		}
+	}
+
 #if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
 	temp = readl(sport->port.membase + UCR3);
 	temp |= UCR3_RXDMUXSEL;
 	writel(temp, sport->port.membase + UCR3);
 #endif
 
+	if (USE_IRDA(sport)) {
+		temp = readl(sport->port.membase + UCR4);
+		if (sport->irda_inv_rx)
+			temp |= UCR4_INVR;
+		else
+			temp &= ~(UCR4_INVR);
+		writel(temp | UCR4_DREN, sport->port.membase + UCR4);
+
+		temp = readl(sport->port.membase + UCR3);
+		if (sport->irda_inv_tx)
+			temp |= UCR3_INVT;
+		else
+			temp &= ~(UCR3_INVT);
+		writel(temp, sport->port.membase + UCR3);
+	}
+
 	/*
 	 * Enable modem status interrupts
 	 */
@@ -616,6 +742,16 @@ static int imx_startup(struct uart_port *port)
 	imx_enable_ms(&sport->port);
 	spin_unlock_irqrestore(&sport->port.lock,flags);
 
+	if (USE_IRDA(sport)) {
+		struct imxuart_platform_data *pdata;
+		pdata = sport->port.dev->platform_data;
+		sport->irda_inv_rx = pdata->irda_inv_rx;
+		sport->irda_inv_tx = pdata->irda_inv_tx;
+		sport->trcv_delay = pdata->transceiver_delay;
+		if (pdata->irda_enable)
+			pdata->irda_enable(1);
+	}
+
 	return 0;
 
 error_out3:
@@ -633,6 +769,17 @@ static void imx_shutdown(struct uart_port *port)
 	struct imx_port *sport = (struct imx_port *)port;
 	unsigned long temp;
 
+	temp = readl(sport->port.membase + UCR2);
+	temp &= ~(UCR2_TXEN);
+	writel(temp, sport->port.membase + UCR2);
+
+	if (USE_IRDA(sport)) {
+		struct imxuart_platform_data *pdata;
+		pdata = sport->port.dev->platform_data;
+		if (pdata->irda_enable)
+			pdata->irda_enable(0);
+	}
+
 	/*
 	 * Stop our timer.
 	 */
@@ -642,7 +789,8 @@ static void imx_shutdown(struct uart_port *port)
 	 * Free the interrupts
 	 */
 	if (sport->txirq > 0) {
-		free_irq(sport->rtsirq, sport);
+		if (!USE_IRDA(sport))
+			free_irq(sport->rtsirq, sport);
 		free_irq(sport->txirq, sport);
 		free_irq(sport->rxirq, sport);
 	} else
@@ -654,6 +802,9 @@ static void imx_shutdown(struct uart_port *port)
 
 	temp = readl(sport->port.membase + UCR1);
 	temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
+	if (USE_IRDA(sport))
+		temp &= ~(UCR1_IREN);
+
 	writel(temp, sport->port.membase + UCR1);
 }
 
@@ -665,7 +816,9 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
 	unsigned long flags;
 	unsigned int ucr2, old_ucr1, old_txrxen, baud, quot;
 	unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
-	unsigned int div, num, denom, ufcr;
+	unsigned int div, ufcr;
+	unsigned long num, denom;
+	uint64_t tdiv64;
 
 	/*
 	 * If we don't support modem control lines, don't allow
@@ -761,38 +914,39 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
 			sport->port.membase + UCR2);
 	old_txrxen &= (UCR2_TXEN | UCR2_RXEN);
 
-	div = sport->port.uartclk / (baud * 16);
-	if (div > 7)
-		div = 7;
-	if (!div)
+	if (USE_IRDA(sport)) {
+		/*
+		 * use maximum available submodule frequency to
+		 * avoid missing short pulses due to low sampling rate
+		 */
 		div = 1;
-
-	num = baud;
-	denom = port->uartclk / div / 16;
-
-	/* shift num and denom right until they fit into 16 bits */
-	while (num > 0x10000 || denom > 0x10000) {
-		num >>= 1;
-		denom >>= 1;
+	} else {
+		div = sport->port.uartclk / (baud * 16);
+		if (div > 7)
+			div = 7;
+		if (!div)
+			div = 1;
 	}
-	if (num > 0)
-		num -= 1;
-	if (denom > 0)
-		denom -= 1;
 
-	writel(num, sport->port.membase + UBIR);
-	writel(denom, sport->port.membase + UBMR);
+	rational_best_approximation(16 * div * baud, sport->port.uartclk,
+		1 << 16, 1 << 16, &num, &denom);
 
-	if (div == 7)
-		div = 6; /* 6 in RFDIV means divide by 7 */
-	else
-		div = 6 - div;
+	tdiv64 = sport->port.uartclk;
+	tdiv64 *= num;
+	do_div(tdiv64, denom * 16 * div);
+	tty_encode_baud_rate(sport->port.info->port.tty,
+		(speed_t)tdiv64, (speed_t)tdiv64);
+
+	num -= 1;
+	denom -= 1;
 
 	ufcr = readl(sport->port.membase + UFCR);
-	ufcr = (ufcr & (~UFCR_RFDIV)) |
-	    (div << 7);
+	ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div);
 	writel(ufcr, sport->port.membase + UFCR);
 
+	writel(num, sport->port.membase + UBIR);
+	writel(denom, sport->port.membase + UBMR);
+
 #ifdef ONEMS
 	writel(sport->port.uartclk / div / 1000, sport->port.membase + ONEMS);
 #endif
@@ -1072,22 +1226,22 @@ static struct uart_driver imx_reg = {
 
 static int serial_imx_suspend(struct platform_device *dev, pm_message_t state)
 {
-        struct imx_port *sport = platform_get_drvdata(dev);
+	struct imx_port *sport = platform_get_drvdata(dev);
 
-        if (sport)
-                uart_suspend_port(&imx_reg, &sport->port);
+	if (sport)
+		uart_suspend_port(&imx_reg, &sport->port);
 
-        return 0;
+	return 0;
 }
 
 static int serial_imx_resume(struct platform_device *dev)
 {
-        struct imx_port *sport = platform_get_drvdata(dev);
+	struct imx_port *sport = platform_get_drvdata(dev);
 
-        if (sport)
-                uart_resume_port(&imx_reg, &sport->port);
+	if (sport)
+		uart_resume_port(&imx_reg, &sport->port);
 
-        return 0;
+	return 0;
 }
 
 static int serial_imx_probe(struct platform_device *pdev)
@@ -1143,19 +1297,29 @@ static int serial_imx_probe(struct platform_device *pdev)
 	imx_ports[pdev->id] = sport;
 
 	pdata = pdev->dev.platform_data;
-	if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
+	if (pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
 		sport->have_rtscts = 1;
 
+#ifdef CONFIG_IRDA
+	if (pdata && (pdata->flags & IMXUART_IRDA))
+		sport->use_irda = 1;
+#endif
+
 	if (pdata->init) {
 		ret = pdata->init(pdev);
 		if (ret)
 			goto clkput;
 	}
 
-	uart_add_one_port(&imx_reg, &sport->port);
+	ret = uart_add_one_port(&imx_reg, &sport->port);
+	if (ret)
+		goto deinit;
 	platform_set_drvdata(pdev, &sport->port);
 
 	return 0;
+deinit:
+	if (pdata->exit)
+		pdata->exit(pdev);
 clkput:
 	clk_put(sport->clk);
 	clk_disable(sport->clk);
@@ -1193,13 +1357,13 @@ static int serial_imx_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver serial_imx_driver = {
-        .probe          = serial_imx_probe,
-        .remove         = serial_imx_remove,
+	.probe		= serial_imx_probe,
+	.remove		= serial_imx_remove,
 
 	.suspend	= serial_imx_suspend,
 	.resume		= serial_imx_resume,
 	.driver		= {
-	        .name	= "imx-uart",
+		.name	= "imx-uart",
 		.owner	= THIS_MODULE,
 	},
 };

drivers/serial/jsm/jsm.h

@@ -61,6 +61,7 @@ enum {
 	if ((DBG_##nlevel & jsm_debug))			\
 	dev_printk(KERN_##klevel, pdev->dev, fmt, ## args)
 
+#define	MAXLINES	256
 #define MAXPORTS	8
 #define MAX_STOPS_SENT	5
 

drivers/serial/jsm/jsm_tty.c

@@ -33,6 +33,8 @@
 
 #include "jsm.h"
 
+static DECLARE_BITMAP(linemap, MAXLINES);
+
 static void jsm_carrier(struct jsm_channel *ch);
 
 static inline int jsm_get_mstat(struct jsm_channel *ch)
@@ -433,6 +435,7 @@ int __devinit jsm_tty_init(struct jsm_board *brd)
 int __devinit jsm_uart_port_init(struct jsm_board *brd)
 {
 	int i;
+	unsigned int line;
 	struct jsm_channel *ch;
 
 	if (!brd)
@@ -459,9 +462,15 @@ int __devinit jsm_uart_port_init(struct jsm_board *brd)
 		brd->channels[i]->uart_port.membase = brd->re_map_membase;
 		brd->channels[i]->uart_port.fifosize = 16;
 		brd->channels[i]->uart_port.ops = &jsm_ops;
-		brd->channels[i]->uart_port.line = brd->channels[i]->ch_portnum + brd->boardnum * 2;
+		line = find_first_zero_bit(linemap, MAXLINES);
+		if (line >= MAXLINES) {
+			printk(KERN_INFO "jsm: linemap is full, added device failed\n");
+			continue;
+		} else
+			set_bit((int)line, linemap);
+		brd->channels[i]->uart_port.line = line;
 		if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port))
-			printk(KERN_INFO "Added device failed\n");
+			printk(KERN_INFO "jsm: add device failed\n");
 		else
 			printk(KERN_INFO "Added device \n");
 	}
@@ -494,6 +503,7 @@ int jsm_remove_uart_port(struct jsm_board *brd)
 
 		ch = brd->channels[i];
 
+		clear_bit((int)(ch->uart_port.line), linemap);
 		uart_remove_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port);
 	}
 

drivers/serial/timbuart.c

@@ -0,0 +1,526 @@
+/*
+ * timbuart.c timberdale FPGA UART driver
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Timberdale FPGA UART
+ */
+
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+
+#include "timbuart.h"
+
+struct timbuart_port {
+	struct uart_port	port;
+	struct tasklet_struct	tasklet;
+	int			usedma;
+	u8			last_ier;
+	struct platform_device  *dev;
+};
+
+static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800,
+	921600, 1843200, 3250000};
+
+static void timbuart_mctrl_check(struct uart_port *port, u8 isr, u8 *ier);
+
+static irqreturn_t timbuart_handleinterrupt(int irq, void *devid);
+
+static void timbuart_stop_rx(struct uart_port *port)
+{
+	/* spin lock held by upper layer, disable all RX interrupts */
+	u8 ier = ioread8(port->membase + TIMBUART_IER) & ~RXFLAGS;
+	iowrite8(ier, port->membase + TIMBUART_IER);
+}
+
+static void timbuart_stop_tx(struct uart_port *port)
+{
+	/* spinlock held by upper layer, disable TX interrupt */
+	u8 ier = ioread8(port->membase + TIMBUART_IER) & ~TXBAE;
+	iowrite8(ier, port->membase + TIMBUART_IER);
+}
+
+static void timbuart_start_tx(struct uart_port *port)
+{
+	struct timbuart_port *uart =
+		container_of(port, struct timbuart_port, port);
+
+	/* do not transfer anything here -> fire off the tasklet */
+	tasklet_schedule(&uart->tasklet);
+}
+
+static void timbuart_flush_buffer(struct uart_port *port)
+{
+	u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | TIMBUART_CTRL_FLSHTX;
+
+	iowrite8(ctl, port->membase + TIMBUART_CTRL);
+	iowrite8(TXBF, port->membase + TIMBUART_ISR);
+}
+
+static void timbuart_rx_chars(struct uart_port *port)
+{
+	struct tty_struct *tty = port->info->port.tty;
+
+	while (ioread8(port->membase + TIMBUART_ISR) & RXDP) {
+		u8 ch = ioread8(port->membase + TIMBUART_RXFIFO);
+		port->icount.rx++;
+		tty_insert_flip_char(tty, ch, TTY_NORMAL);
+	}
+
+	spin_unlock(&port->lock);
+	tty_flip_buffer_push(port->info->port.tty);
+	spin_lock(&port->lock);
+
+	dev_dbg(port->dev, "%s - total read %d bytes\n",
+		__func__, port->icount.rx);
+}
+
+static void timbuart_tx_chars(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->info->xmit;
+
+	while (!(ioread8(port->membase + TIMBUART_ISR) & TXBF) &&
+		!uart_circ_empty(xmit)) {
+		iowrite8(xmit->buf[xmit->tail],
+			port->membase + TIMBUART_TXFIFO);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+	}
+
+	dev_dbg(port->dev,
+		"%s - total written %d bytes, CTL: %x, RTS: %x, baud: %x\n",
+		 __func__,
+		port->icount.tx,
+		ioread8(port->membase + TIMBUART_CTRL),
+		port->mctrl & TIOCM_RTS,
+		ioread8(port->membase + TIMBUART_BAUDRATE));
+}
+
+static void timbuart_handle_tx_port(struct uart_port *port, u8 isr, u8 *ier)
+{
+	struct timbuart_port *uart =
+		container_of(port, struct timbuart_port, port);
+	struct circ_buf *xmit = &port->info->xmit;
+
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+		return;
+
+	if (port->x_char)
+		return;
+
+	if (isr & TXFLAGS) {
+		timbuart_tx_chars(port);
+		/* clear all TX interrupts */
+		iowrite8(TXFLAGS, port->membase + TIMBUART_ISR);
+
+		if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+			uart_write_wakeup(port);
+	} else
+		/* Re-enable any tx interrupt */
+		*ier |= uart->last_ier & TXFLAGS;
+
+	/* enable interrupts if there are chars in the transmit buffer,
+	 * Or if we delivered some bytes and want the almost empty interrupt
+	 * we wake up the upper layer later when we got the interrupt
+	 * to give it some time to go out...
+	 */
+	if (!uart_circ_empty(xmit))
+		*ier |= TXBAE;
+
+	dev_dbg(port->dev, "%s - leaving\n", __func__);
+}
+
+void timbuart_handle_rx_port(struct uart_port *port, u8 isr, u8 *ier)
+{
+	if (isr & RXFLAGS) {
+		/* Some RX status is set */
+		if (isr & RXBF) {
+			u8 ctl = ioread8(port->membase + TIMBUART_CTRL) |
+				TIMBUART_CTRL_FLSHRX;
+			iowrite8(ctl, port->membase + TIMBUART_CTRL);
+			port->icount.overrun++;
+		} else if (isr & (RXDP))
+			timbuart_rx_chars(port);
+
+		/* ack all RX interrupts */
+		iowrite8(RXFLAGS, port->membase + TIMBUART_ISR);
+	}
+
+	/* always have the RX interrupts enabled */
+	*ier |= RXBAF | RXBF | RXTT;
+
+	dev_dbg(port->dev, "%s - leaving\n", __func__);
+}
+
+void timbuart_tasklet(unsigned long arg)
+{
+	struct timbuart_port *uart = (struct timbuart_port *)arg;
+	u8 isr, ier = 0;
+
+	spin_lock(&uart->port.lock);
+
+	isr = ioread8(uart->port.membase + TIMBUART_ISR);
+	dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr);
+
+	if (!uart->usedma)
+		timbuart_handle_tx_port(&uart->port, isr, &ier);
+
+	timbuart_mctrl_check(&uart->port, isr, &ier);
+
+	if (!uart->usedma)
+		timbuart_handle_rx_port(&uart->port, isr, &ier);
+
+	iowrite8(ier, uart->port.membase + TIMBUART_IER);
+
+	spin_unlock(&uart->port.lock);
+	dev_dbg(uart->port.dev, "%s leaving\n", __func__);
+}
+
+static unsigned int timbuart_tx_empty(struct uart_port *port)
+{
+	u8 isr = ioread8(port->membase + TIMBUART_ISR);
+
+	return (isr & TXBAE) ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int timbuart_get_mctrl(struct uart_port *port)
+{
+	u8 cts = ioread8(port->membase + TIMBUART_CTRL);
+	dev_dbg(port->dev, "%s - cts %x\n", __func__, cts);
+
+	if (cts & TIMBUART_CTRL_CTS)
+		return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+	else
+		return TIOCM_DSR | TIOCM_CAR;
+}
+
+static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	dev_dbg(port->dev, "%s - %x\n", __func__, mctrl);
+
+	if (mctrl & TIOCM_RTS)
+		iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
+	else
+		iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
+}
+
+static void timbuart_mctrl_check(struct uart_port *port, u8 isr, u8 *ier)
+{
+	unsigned int cts;
+
+	if (isr & CTS_DELTA) {
+		/* ack */
+		iowrite8(CTS_DELTA, port->membase + TIMBUART_ISR);
+		cts = timbuart_get_mctrl(port);
+		uart_handle_cts_change(port, cts & TIOCM_CTS);
+		wake_up_interruptible(&port->info->delta_msr_wait);
+	}
+
+	*ier |= CTS_DELTA;
+}
+
+static void timbuart_enable_ms(struct uart_port *port)
+{
+	/* N/A */
+}
+
+static void timbuart_break_ctl(struct uart_port *port, int ctl)
+{
+	/* N/A */
+}
+
+static int timbuart_startup(struct uart_port *port)
+{
+	struct timbuart_port *uart =
+		container_of(port, struct timbuart_port, port);
+
+	dev_dbg(port->dev, "%s\n", __func__);
+
+	iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL);
+	iowrite8(0xff, port->membase + TIMBUART_ISR);
+	/* Enable all but TX interrupts */
+	iowrite8(RXBAF | RXBF | RXTT | CTS_DELTA,
+		port->membase + TIMBUART_IER);
+
+	return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED,
+		"timb-uart", uart);
+}
+
+static void timbuart_shutdown(struct uart_port *port)
+{
+	struct timbuart_port *uart =
+		container_of(port, struct timbuart_port, port);
+	dev_dbg(port->dev, "%s\n", __func__);
+	free_irq(port->irq, uart);
+	iowrite8(0, port->membase + TIMBUART_IER);
+}
+
+static int get_bindex(int baud)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(baudrates); i++)
+		if (baud <= baudrates[i])
+			return i;
+
+	return -1;
+}
+
+static void timbuart_set_termios(struct uart_port *port,
+	struct ktermios *termios,
+	struct ktermios *old)
+{
+	unsigned int baud;
+	short bindex;
+	unsigned long flags;
+
+	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
+	bindex = get_bindex(baud);
+	dev_dbg(port->dev, "%s - bindex %d\n", __func__, bindex);
+
+	if (bindex < 0)
+		bindex = 0;
+	baud = baudrates[bindex];
+
+	/* The serial layer calls into this once with old = NULL when setting
+	   up initially */
+	if (old)
+		tty_termios_copy_hw(termios, old);
+	tty_termios_encode_baud_rate(termios, baud, baud);
+
+	spin_lock_irqsave(&port->lock, flags);
+	iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE);
+	uart_update_timeout(port, termios->c_cflag, baud);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *timbuart_type(struct uart_port *port)
+{
+	return port->type == PORT_UNKNOWN ? "timbuart" : NULL;
+}
+
+/* We do not request/release mappings of the registers here,
+ * currently it's done in the proble function.
+ */
+static void timbuart_release_port(struct uart_port *port)
+{
+	struct platform_device *pdev = to_platform_device(port->dev);
+	int size =
+		resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));
+
+	if (port->flags & UPF_IOREMAP) {
+		iounmap(port->membase);
+		port->membase = NULL;
+	}
+
+	release_mem_region(port->mapbase, size);
+}
+
+static int timbuart_request_port(struct uart_port *port)
+{
+	struct platform_device *pdev = to_platform_device(port->dev);
+	int size =
+		resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));
+
+	if (!request_mem_region(port->mapbase, size, "timb-uart"))
+		return -EBUSY;
+
+	if (port->flags & UPF_IOREMAP) {
+		port->membase = ioremap(port->mapbase, size);
+		if (port->membase == NULL) {
+			release_mem_region(port->mapbase, size);
+			return -ENOMEM;
+		}
+	}
+
+	return 0;
+}
+
+static irqreturn_t timbuart_handleinterrupt(int irq, void *devid)
+{
+	struct timbuart_port *uart = (struct timbuart_port *)devid;
+
+	if (ioread8(uart->port.membase + TIMBUART_IPR)) {
+		uart->last_ier = ioread8(uart->port.membase + TIMBUART_IER);
+
+		/* disable interrupts, the tasklet enables them again */
+		iowrite8(0, uart->port.membase + TIMBUART_IER);
+
+		/* fire off bottom half */
+		tasklet_schedule(&uart->tasklet);
+
+		return IRQ_HANDLED;
+	} else
+		return IRQ_NONE;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void timbuart_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE) {
+		port->type = PORT_TIMBUART;
+		timbuart_request_port(port);
+	}
+}
+
+static int timbuart_verify_port(struct uart_port *port,
+	struct serial_struct *ser)
+{
+	/* we don't want the core code to modify any port params */
+	return -EINVAL;
+}
+
+static struct uart_ops timbuart_ops = {
+	.tx_empty = timbuart_tx_empty,
+	.set_mctrl = timbuart_set_mctrl,
+	.get_mctrl = timbuart_get_mctrl,
+	.stop_tx = timbuart_stop_tx,
+	.start_tx = timbuart_start_tx,
+	.flush_buffer = timbuart_flush_buffer,
+	.stop_rx = timbuart_stop_rx,
+	.enable_ms = timbuart_enable_ms,
+	.break_ctl = timbuart_break_ctl,
+	.startup = timbuart_startup,
+	.shutdown = timbuart_shutdown,
+	.set_termios = timbuart_set_termios,
+	.type = timbuart_type,
+	.release_port = timbuart_release_port,
+	.request_port = timbuart_request_port,
+	.config_port = timbuart_config_port,
+	.verify_port = timbuart_verify_port
+};
+
+static struct uart_driver timbuart_driver = {
+	.owner = THIS_MODULE,
+	.driver_name = "timberdale_uart",
+	.dev_name = "ttyTU",
+	.major = TIMBUART_MAJOR,
+	.minor = TIMBUART_MINOR,
+	.nr = 1
+};
+
+static int timbuart_probe(struct platform_device *dev)
+{
+	int err;
+	struct timbuart_port *uart;
+	struct resource *iomem;
+
+	dev_dbg(&dev->dev, "%s\n", __func__);
+
+	uart = kzalloc(sizeof(*uart), GFP_KERNEL);
+	if (!uart) {
+		err = -EINVAL;
+		goto err_mem;
+	}
+
+	uart->usedma = 0;
+
+	uart->port.uartclk = 3250000 * 16;
+	uart->port.fifosize  = TIMBUART_FIFO_SIZE;
+	uart->port.regshift  = 2;
+	uart->port.iotype  = UPIO_MEM;
+	uart->port.ops = &timbuart_ops;
+	uart->port.irq = 0;
+	uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
+	uart->port.line  = 0;
+	uart->port.dev	= &dev->dev;
+
+	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!iomem) {
+		err = -ENOMEM;
+		goto err_register;
+	}
+	uart->port.mapbase = iomem->start;
+	uart->port.membase = NULL;
+
+	uart->port.irq = platform_get_irq(dev, 0);
+	if (uart->port.irq < 0) {
+		err = -EINVAL;
+		goto err_register;
+	}
+
+	tasklet_init(&uart->tasklet, timbuart_tasklet, (unsigned long)uart);
+
+	err = uart_register_driver(&timbuart_driver);
+	if (err)
+		goto err_register;
+
+	err = uart_add_one_port(&timbuart_driver, &uart->port);
+	if (err)
+		goto err_add_port;
+
+	platform_set_drvdata(dev, uart);
+
+	return 0;
+
+err_add_port:
+	uart_unregister_driver(&timbuart_driver);
+err_register:
+	kfree(uart);
+err_mem:
+	printk(KERN_ERR "timberdale: Failed to register Timberdale UART: %d\n",
+		err);
+
+	return err;
+}
+
+static int timbuart_remove(struct platform_device *dev)
+{
+	struct timbuart_port *uart = platform_get_drvdata(dev);
+
+	tasklet_kill(&uart->tasklet);
+	uart_remove_one_port(&timbuart_driver, &uart->port);
+	uart_unregister_driver(&timbuart_driver);
+	kfree(uart);
+
+	return 0;
+}
+
+static struct platform_driver timbuart_platform_driver = {
+	.driver = {
+		.name	= "timb-uart",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= timbuart_probe,
+	.remove		= timbuart_remove,
+};
+
+/*--------------------------------------------------------------------------*/
+
+static int __init timbuart_init(void)
+{
+	return platform_driver_register(&timbuart_platform_driver);
+}
+
+static void __exit timbuart_exit(void)
+{
+	platform_driver_unregister(&timbuart_platform_driver);
+}
+
+module_init(timbuart_init);
+module_exit(timbuart_exit);
+
+MODULE_DESCRIPTION("Timberdale UART driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:timb-uart");
+

drivers/serial/timbuart.h

@@ -0,0 +1,58 @@
+/*
+ * timbuart.c timberdale FPGA GPIO driver
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Timberdale FPGA UART
+ */
+
+#ifndef _TIMBUART_H
+#define _TIMBUART_H
+
+#define TIMBUART_FIFO_SIZE	2048
+
+#define TIMBUART_RXFIFO		0x08
+#define TIMBUART_TXFIFO		0x0c
+#define TIMBUART_IER		0x10
+#define TIMBUART_IPR		0x14
+#define TIMBUART_ISR		0x18
+#define TIMBUART_CTRL		0x1c
+#define TIMBUART_BAUDRATE	0x20
+
+#define TIMBUART_CTRL_RTS	0x01
+#define TIMBUART_CTRL_CTS	0x02
+#define TIMBUART_CTRL_FLSHTX	0x40
+#define TIMBUART_CTRL_FLSHRX	0x80
+
+#define TXBF		0x01
+#define TXBAE		0x02
+#define CTS_DELTA	0x04
+#define RXDP		0x08
+#define RXBAF		0x10
+#define RXBF		0x20
+#define RXTT		0x40
+#define RXBNAE		0x80
+#define TXBE		0x100
+
+#define RXFLAGS (RXDP | RXBAF | RXBF | RXTT | RXBNAE)
+#define TXFLAGS (TXBF | TXBAE)
+
+#define TIMBUART_MAJOR 204
+#define TIMBUART_MINOR 192
+
+#endif /* _TIMBUART_H */
+

drivers/usb/class/cdc-acm.c

@@ -16,7 +16,8 @@
  *	v0.9  - thorough cleaning, URBification, almost a rewrite
  *	v0.10 - some more cleanups
  *	v0.11 - fixed flow control, read error doesn't stop reads
- *	v0.12 - added TIOCM ioctls, added break handling, made struct acm kmalloced
+ *	v0.12 - added TIOCM ioctls, added break handling, made struct acm
+ *		kmalloced
  *	v0.13 - added termios, added hangup
  *	v0.14 - sized down struct acm
  *	v0.15 - fixed flow control again - characters could be lost
@@ -62,7 +63,7 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/cdc.h>
 #include <asm/byteorder.h>
@@ -87,7 +88,10 @@ static struct acm *acm_table[ACM_TTY_MINORS];
 
 static DEFINE_MUTEX(open_mutex);
 
-#define ACM_READY(acm)	(acm && acm->dev && acm->used)
+#define ACM_READY(acm)	(acm && acm->dev && acm->port.count)
+
+static const struct tty_port_operations acm_port_ops = {
+};
 
 #ifdef VERBOSE_DEBUG
 #define verbose	1
@@ -99,13 +103,15 @@ static DEFINE_MUTEX(open_mutex);
  * Functions for ACM control messages.
  */
 
-static int acm_ctrl_msg(struct acm *acm, int request, int value, void *buf, int len)
+static int acm_ctrl_msg(struct acm *acm, int request, int value,
+							void *buf, int len)
 {
 	int retval = usb_control_msg(acm->dev, usb_sndctrlpipe(acm->dev, 0),
 		request, USB_RT_ACM, value,
 		acm->control->altsetting[0].desc.bInterfaceNumber,
 		buf, len, 5000);
-	dbg("acm_control_msg: rq: 0x%02x val: %#x len: %#x result: %d", request, value, len, retval);
+	dbg("acm_control_msg: rq: 0x%02x val: %#x len: %#x result: %d",
+						request, value, len, retval);
 	return retval < 0 ? retval : 0;
 }
 
@@ -150,9 +156,8 @@ static int acm_wb_is_avail(struct acm *acm)
 
 	n = ACM_NW;
 	spin_lock_irqsave(&acm->write_lock, flags);
-	for (i = 0; i < ACM_NW; i++) {
+	for (i = 0; i < ACM_NW; i++)
 		n -= acm->wb[i].use;
-	}
 	spin_unlock_irqrestore(&acm->write_lock, flags);
 	return n;
 }
@@ -183,7 +188,8 @@ static int acm_start_wb(struct acm *acm, struct acm_wb *wb)
 	wb->urb->transfer_buffer_length = wb->len;
 	wb->urb->dev = acm->dev;
 
-	if ((rc = usb_submit_urb(wb->urb, GFP_ATOMIC)) < 0) {
+	rc = usb_submit_urb(wb->urb, GFP_ATOMIC);
+	if (rc < 0) {
 		dbg("usb_submit_urb(write bulk) failed: %d", rc);
 		acm_write_done(acm, wb);
 	}
@@ -262,6 +268,7 @@ static void acm_ctrl_irq(struct urb *urb)
 {
 	struct acm *acm = urb->context;
 	struct usb_cdc_notification *dr = urb->transfer_buffer;
+	struct tty_struct *tty;
 	unsigned char *data;
 	int newctrl;
 	int retval;
@@ -287,40 +294,45 @@ static void acm_ctrl_irq(struct urb *urb)
 
 	data = (unsigned char *)(dr + 1);
 	switch (dr->bNotificationType) {
+	case USB_CDC_NOTIFY_NETWORK_CONNECTION:
+		dbg("%s network", dr->wValue ?
+					"connected to" : "disconnected from");
+		break;
 
-		case USB_CDC_NOTIFY_NETWORK_CONNECTION:
-
-			dbg("%s network", dr->wValue ? "connected to" : "disconnected from");
-			break;
-
-		case USB_CDC_NOTIFY_SERIAL_STATE:
-
-			newctrl = get_unaligned_le16(data);
+	case USB_CDC_NOTIFY_SERIAL_STATE:
+		tty = tty_port_tty_get(&acm->port);
+		newctrl = get_unaligned_le16(data);
 
-			if (acm->tty && !acm->clocal && (acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) {
+		if (tty) {
+			if (!acm->clocal &&
+				(acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) {
 				dbg("calling hangup");
-				tty_hangup(acm->tty);
+				tty_hangup(tty);
 			}
+			tty_kref_put(tty);
+		}
 
-			acm->ctrlin = newctrl;
-
-			dbg("input control lines: dcd%c dsr%c break%c ring%c framing%c parity%c overrun%c",
-				acm->ctrlin & ACM_CTRL_DCD ? '+' : '-',	acm->ctrlin & ACM_CTRL_DSR ? '+' : '-',
-				acm->ctrlin & ACM_CTRL_BRK ? '+' : '-',	acm->ctrlin & ACM_CTRL_RI  ? '+' : '-',
-				acm->ctrlin & ACM_CTRL_FRAMING ? '+' : '-',	acm->ctrlin & ACM_CTRL_PARITY ? '+' : '-',
-				acm->ctrlin & ACM_CTRL_OVERRUN ? '+' : '-');
+		acm->ctrlin = newctrl;
 
+		dbg("input control lines: dcd%c dsr%c break%c ring%c framing%c parity%c overrun%c",
+			acm->ctrlin & ACM_CTRL_DCD ? '+' : '-',
+			acm->ctrlin & ACM_CTRL_DSR ? '+' : '-',
+			acm->ctrlin & ACM_CTRL_BRK ? '+' : '-',
+			acm->ctrlin & ACM_CTRL_RI  ? '+' : '-',
+			acm->ctrlin & ACM_CTRL_FRAMING ? '+' : '-',
+			acm->ctrlin & ACM_CTRL_PARITY ? '+' : '-',
+			acm->ctrlin & ACM_CTRL_OVERRUN ? '+' : '-');
 			break;
 
-		default:
-			dbg("unknown notification %d received: index %d len %d data0 %d data1 %d",
-				dr->bNotificationType, dr->wIndex,
-				dr->wLength, data[0], data[1]);
-			break;
+	default:
+		dbg("unknown notification %d received: index %d len %d data0 %d data1 %d",
+			dr->bNotificationType, dr->wIndex,
+			dr->wLength, data[0], data[1]);
+		break;
 	}
 exit:
 	usb_mark_last_busy(acm->dev);
-	retval = usb_submit_urb (urb, GFP_ATOMIC);
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
 		dev_err(&urb->dev->dev, "%s - usb_submit_urb failed with "
 			"result %d", __func__, retval);
@@ -371,15 +383,14 @@ static void acm_rx_tasklet(unsigned long _acm)
 {
 	struct acm *acm = (void *)_acm;
 	struct acm_rb *buf;
-	struct tty_struct *tty = acm->tty;
+	struct tty_struct *tty;
 	struct acm_ru *rcv;
 	unsigned long flags;
 	unsigned char throttled;
 
 	dbg("Entering acm_rx_tasklet");
 
-	if (!ACM_READY(acm))
-	{
+	if (!ACM_READY(acm)) {
 		dbg("acm_rx_tasklet: ACM not ready");
 		return;
 	}
@@ -387,12 +398,13 @@ static void acm_rx_tasklet(unsigned long _acm)
 	spin_lock_irqsave(&acm->throttle_lock, flags);
 	throttled = acm->throttle;
 	spin_unlock_irqrestore(&acm->throttle_lock, flags);
-	if (throttled)
-	{
+	if (throttled) {
 		dbg("acm_rx_tasklet: throttled");
 		return;
 	}
 
+	tty = tty_port_tty_get(&acm->port);
+
 next_buffer:
 	spin_lock_irqsave(&acm->read_lock, flags);
 	if (list_empty(&acm->filled_read_bufs)) {
@@ -406,20 +418,22 @@ next_buffer:
 
 	dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d", buf, buf->size);
 
-	tty_buffer_request_room(tty, buf->size);
-	spin_lock_irqsave(&acm->throttle_lock, flags);
-	throttled = acm->throttle;
-	spin_unlock_irqrestore(&acm->throttle_lock, flags);
-	if (!throttled)
-		tty_insert_flip_string(tty, buf->base, buf->size);
-	tty_flip_buffer_push(tty);
-
-	if (throttled) {
-		dbg("Throttling noticed");
-		spin_lock_irqsave(&acm->read_lock, flags);
-		list_add(&buf->list, &acm->filled_read_bufs);
-		spin_unlock_irqrestore(&acm->read_lock, flags);
-		return;
+	if (tty) {
+		spin_lock_irqsave(&acm->throttle_lock, flags);
+		throttled = acm->throttle;
+		spin_unlock_irqrestore(&acm->throttle_lock, flags);
+		if (!throttled) {
+			tty_buffer_request_room(tty, buf->size);
+			tty_insert_flip_string(tty, buf->base, buf->size);
+			tty_flip_buffer_push(tty);
+		} else {
+			tty_kref_put(tty);
+			dbg("Throttling noticed");
+			spin_lock_irqsave(&acm->read_lock, flags);
+			list_add(&buf->list, &acm->filled_read_bufs);
+			spin_unlock_irqrestore(&acm->read_lock, flags);
+			return;
+		}
 	}
 
 	spin_lock_irqsave(&acm->read_lock, flags);
@@ -428,6 +442,8 @@ next_buffer:
 	goto next_buffer;
 
 urbs:
+	tty_kref_put(tty);
+
 	while (!list_empty(&acm->spare_read_bufs)) {
 		spin_lock_irqsave(&acm->read_lock, flags);
 		if (list_empty(&acm->spare_read_urbs)) {
@@ -454,10 +470,11 @@ urbs:
 		rcv->urb->transfer_dma = buf->dma;
 		rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
-		/* This shouldn't kill the driver as unsuccessful URBs are returned to the
-		   free-urbs-pool and resubmited ASAP */
+		/* This shouldn't kill the driver as unsuccessful URBs are
+		   returned to the free-urbs-pool and resubmited ASAP */
 		spin_lock_irqsave(&acm->read_lock, flags);
-		if (acm->susp_count || usb_submit_urb(rcv->urb, GFP_ATOMIC) < 0) {
+		if (acm->susp_count ||
+				usb_submit_urb(rcv->urb, GFP_ATOMIC) < 0) {
 			list_add(&buf->list, &acm->spare_read_bufs);
 			list_add(&rcv->list, &acm->spare_read_urbs);
 			acm->processing = 0;
@@ -499,11 +516,14 @@ static void acm_write_bulk(struct urb *urb)
 static void acm_softint(struct work_struct *work)
 {
 	struct acm *acm = container_of(work, struct acm, work);
+	struct tty_struct *tty;
 
 	dev_vdbg(&acm->data->dev, "tx work\n");
 	if (!ACM_READY(acm))
 		return;
-	tty_wakeup(acm->tty);
+	tty = tty_port_tty_get(&acm->port);
+	tty_wakeup(tty);
+	tty_kref_put(tty);
 }
 
 static void acm_waker(struct work_struct *waker)
@@ -543,8 +563,9 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 		rv = 0;
 
 	set_bit(TTY_NO_WRITE_SPLIT, &tty->flags);
+
 	tty->driver_data = acm;
-	acm->tty = tty;
+	tty_port_tty_set(&acm->port, tty);
 
 	if (usb_autopm_get_interface(acm->control) < 0)
 		goto early_bail;
@@ -552,11 +573,10 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 		acm->control->needs_remote_wakeup = 1;
 
 	mutex_lock(&acm->mutex);
-	if (acm->used++) {
+	if (acm->port.count++) {
 		usb_autopm_put_interface(acm->control);
 		goto done;
-        }
-
+	}
 
 	acm->ctrlurb->dev = acm->dev;
 	if (usb_submit_urb(acm->ctrlurb, GFP_KERNEL)) {
@@ -567,22 +587,22 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 	if (0 > acm_set_control(acm, acm->ctrlout = ACM_CTRL_DTR | ACM_CTRL_RTS) &&
 	    (acm->ctrl_caps & USB_CDC_CAP_LINE))
 		goto full_bailout;
+
 	usb_autopm_put_interface(acm->control);
 
 	INIT_LIST_HEAD(&acm->spare_read_urbs);
 	INIT_LIST_HEAD(&acm->spare_read_bufs);
 	INIT_LIST_HEAD(&acm->filled_read_bufs);
-	for (i = 0; i < acm->rx_buflimit; i++) {
+
+	for (i = 0; i < acm->rx_buflimit; i++)
 		list_add(&(acm->ru[i].list), &acm->spare_read_urbs);
-	}
-	for (i = 0; i < acm->rx_buflimit; i++) {
+	for (i = 0; i < acm->rx_buflimit; i++)
 		list_add(&(acm->rb[i].list), &acm->spare_read_bufs);
-	}
 
 	acm->throttle = 0;
 
 	tasklet_schedule(&acm->urb_task);
-
+	rv = tty_port_block_til_ready(&acm->port, tty, filp);
 done:
 	mutex_unlock(&acm->mutex);
 err_out:
@@ -593,16 +613,17 @@ full_bailout:
 	usb_kill_urb(acm->ctrlurb);
 bail_out:
 	usb_autopm_put_interface(acm->control);
-	acm->used--;
+	acm->port.count--;
 	mutex_unlock(&acm->mutex);
 early_bail:
 	mutex_unlock(&open_mutex);
+	tty_port_tty_set(&acm->port, NULL);
 	return -EIO;
 }
 
 static void acm_tty_unregister(struct acm *acm)
 {
-	int i,nr;
+	int i, nr;
 
 	nr = acm->rx_buflimit;
 	tty_unregister_device(acm_tty_driver, acm->minor);
@@ -619,41 +640,56 @@ static void acm_tty_unregister(struct acm *acm)
 
 static int acm_tty_chars_in_buffer(struct tty_struct *tty);
 
+static void acm_port_down(struct acm *acm, int drain)
+{
+	int i, nr = acm->rx_buflimit;
+	mutex_lock(&open_mutex);
+	if (acm->dev) {
+		usb_autopm_get_interface(acm->control);
+		acm_set_control(acm, acm->ctrlout = 0);
+		/* try letting the last writes drain naturally */
+		if (drain) {
+			wait_event_interruptible_timeout(acm->drain_wait,
+				(ACM_NW == acm_wb_is_avail(acm)) || !acm->dev,
+					ACM_CLOSE_TIMEOUT * HZ);
+		}
+		usb_kill_urb(acm->ctrlurb);
+		for (i = 0; i < ACM_NW; i++)
+			usb_kill_urb(acm->wb[i].urb);
+		for (i = 0; i < nr; i++)
+			usb_kill_urb(acm->ru[i].urb);
+		acm->control->needs_remote_wakeup = 0;
+		usb_autopm_put_interface(acm->control);
+	}
+	mutex_unlock(&open_mutex);
+}
+
+static void acm_tty_hangup(struct tty_struct *tty)
+{
+	struct acm *acm = tty->driver_data;
+	tty_port_hangup(&acm->port);
+	acm_port_down(acm, 0);
+}
+
 static void acm_tty_close(struct tty_struct *tty, struct file *filp)
 {
 	struct acm *acm = tty->driver_data;
-	int i,nr;
 
-	if (!acm || !acm->used)
+	/* Perform the closing process and see if we need to do the hardware
+	   shutdown */
+	if (tty_port_close_start(&acm->port, tty, filp) == 0)
 		return;
-
-	nr = acm->rx_buflimit;
+	acm_port_down(acm, 0);
+	tty_port_close_end(&acm->port, tty);
 	mutex_lock(&open_mutex);
-	if (!--acm->used) {
-		if (acm->dev) {
-			usb_autopm_get_interface(acm->control);
-			acm_set_control(acm, acm->ctrlout = 0);
-
-			/* try letting the last writes drain naturally */
-			wait_event_interruptible_timeout(acm->drain_wait,
-					(ACM_NW == acm_wb_is_avail(acm))
-						|| !acm->dev,
-					ACM_CLOSE_TIMEOUT * HZ);
-
-			usb_kill_urb(acm->ctrlurb);
-			for (i = 0; i < ACM_NW; i++)
-				usb_kill_urb(acm->wb[i].urb);
-			for (i = 0; i < nr; i++)
-				usb_kill_urb(acm->ru[i].urb);
-			acm->control->needs_remote_wakeup = 0;
-			usb_autopm_put_interface(acm->control);
-		} else
-			acm_tty_unregister(acm);
-	}
+	tty_port_tty_set(&acm->port, NULL);
+	if (!acm->dev)
+		acm_tty_unregister(acm);
 	mutex_unlock(&open_mutex);
 }
 
-static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int count)
+static int acm_tty_write(struct tty_struct *tty,
+					const unsigned char *buf, int count)
 {
 	struct acm *acm = tty->driver_data;
 	int stat;
@@ -669,7 +705,8 @@ static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int c
 		return 0;
 
 	spin_lock_irqsave(&acm->write_lock, flags);
-	if ((wbn = acm_wb_alloc(acm)) < 0) {
+	wbn = acm_wb_alloc(acm);
+	if (wbn < 0) {
 		spin_unlock_irqrestore(&acm->write_lock, flags);
 		return 0;
 	}
@@ -681,7 +718,8 @@ static int acm_tty_write(struct tty_struct *tty, const unsigned char *buf, int c
 	wb->len = count;
 	spin_unlock_irqrestore(&acm->write_lock, flags);
 
-	if ((stat = acm_write_start(acm, wbn)) < 0)
+	stat = acm_write_start(acm, wbn);
+	if (stat < 0)
 		return stat;
 	return count;
 }
@@ -767,8 +805,10 @@ static int acm_tty_tiocmset(struct tty_struct *tty, struct file *file,
 		return -EINVAL;
 
 	newctrl = acm->ctrlout;
-	set = (set & TIOCM_DTR ? ACM_CTRL_DTR : 0) | (set & TIOCM_RTS ? ACM_CTRL_RTS : 0);
-	clear = (clear & TIOCM_DTR ? ACM_CTRL_DTR : 0) | (clear & TIOCM_RTS ? ACM_CTRL_RTS : 0);
+	set = (set & TIOCM_DTR ? ACM_CTRL_DTR : 0) |
+					(set & TIOCM_RTS ? ACM_CTRL_RTS : 0);
+	clear = (clear & TIOCM_DTR ? ACM_CTRL_DTR : 0) |
+					(clear & TIOCM_RTS ? ACM_CTRL_RTS : 0);
 
 	newctrl = (newctrl & ~clear) | set;
 
@@ -777,7 +817,8 @@ static int acm_tty_tiocmset(struct tty_struct *tty, struct file *file,
 	return acm_set_control(acm, acm->ctrlout = newctrl);
 }
 
-static int acm_tty_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
+static int acm_tty_ioctl(struct tty_struct *tty, struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
 	struct acm *acm = tty->driver_data;
 
@@ -799,7 +840,8 @@ static const __u8 acm_tty_size[] = {
 	5, 6, 7, 8
 };
 
-static void acm_tty_set_termios(struct tty_struct *tty, struct ktermios *termios_old)
+static void acm_tty_set_termios(struct tty_struct *tty,
+						struct ktermios *termios_old)
 {
 	struct acm *acm = tty->driver_data;
 	struct ktermios *termios = tty->termios;
@@ -809,19 +851,23 @@ static void acm_tty_set_termios(struct tty_struct *tty, struct ktermios *termios
 	if (!ACM_READY(acm))
 		return;
 
+	/* FIXME: Needs to support the tty_baud interface */
+	/* FIXME: Broken on sparc */
 	newline.dwDTERate = cpu_to_le32p(acm_tty_speed +
 		(termios->c_cflag & CBAUD & ~CBAUDEX) + (termios->c_cflag & CBAUDEX ? 15 : 0));
 	newline.bCharFormat = termios->c_cflag & CSTOPB ? 2 : 0;
 	newline.bParityType = termios->c_cflag & PARENB ?
-		(termios->c_cflag & PARODD ? 1 : 2) + (termios->c_cflag & CMSPAR ? 2 : 0) : 0;
+				(termios->c_cflag & PARODD ? 1 : 2) +
+				(termios->c_cflag & CMSPAR ? 2 : 0) : 0;
 	newline.bDataBits = acm_tty_size[(termios->c_cflag & CSIZE) >> 4];
-
+	/* FIXME: Needs to clear unsupported bits in the termios */
 	acm->clocal = ((termios->c_cflag & CLOCAL) != 0);
 
 	if (!newline.dwDTERate) {
 		newline.dwDTERate = acm->line.dwDTERate;
 		newctrl &= ~ACM_CTRL_DTR;
-	} else  newctrl |=  ACM_CTRL_DTR;
+	} else
+		newctrl |=  ACM_CTRL_DTR;
 
 	if (newctrl != acm->ctrlout)
 		acm_set_control(acm, acm->ctrlout = newctrl);
@@ -846,9 +892,8 @@ static void acm_write_buffers_free(struct acm *acm)
 	struct acm_wb *wb;
 	struct usb_device *usb_dev = interface_to_usbdev(acm->control);
 
-	for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++) {
+	for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++)
 		usb_buffer_free(usb_dev, acm->writesize, wb->buf, wb->dmah);
-	}
 }
 
 static void acm_read_buffers_free(struct acm *acm)
@@ -857,7 +902,8 @@ static void acm_read_buffers_free(struct acm *acm)
 	int i, n = acm->rx_buflimit;
 
 	for (i = 0; i < n; i++)
-		usb_buffer_free(usb_dev, acm->readsize, acm->rb[i].base, acm->rb[i].dma);
+		usb_buffer_free(usb_dev, acm->readsize,
+					acm->rb[i].base, acm->rb[i].dma);
 }
 
 /* Little helper: write buffers allocate */
@@ -882,8 +928,8 @@ static int acm_write_buffers_alloc(struct acm *acm)
 	return 0;
 }
 
-static int acm_probe (struct usb_interface *intf,
-		      const struct usb_device_id *id)
+static int acm_probe(struct usb_interface *intf,
+		     const struct usb_device_id *id)
 {
 	struct usb_cdc_union_desc *union_header = NULL;
 	struct usb_cdc_country_functional_desc *cfd = NULL;
@@ -897,7 +943,7 @@ static int acm_probe (struct usb_interface *intf,
 	struct usb_device *usb_dev = interface_to_usbdev(intf);
 	struct acm *acm;
 	int minor;
-	int ctrlsize,readsize;
+	int ctrlsize, readsize;
 	u8 *buf;
 	u8 ac_management_function = 0;
 	u8 call_management_function = 0;
@@ -917,7 +963,7 @@ static int acm_probe (struct usb_interface *intf,
 		control_interface = usb_ifnum_to_if(usb_dev, 0);
 		goto skip_normal_probe;
 	}
-	
+
 	/* normal probing*/
 	if (!buffer) {
 		dev_err(&intf->dev, "Weird descriptor references\n");
@@ -925,8 +971,10 @@ static int acm_probe (struct usb_interface *intf,
 	}
 
 	if (!buflen) {
-		if (intf->cur_altsetting->endpoint->extralen && intf->cur_altsetting->endpoint->extra) {
-			dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint\n");
+		if (intf->cur_altsetting->endpoint->extralen &&
+				intf->cur_altsetting->endpoint->extra) {
+			dev_dbg(&intf->dev,
+				"Seeking extra descriptors on endpoint\n");
 			buflen = intf->cur_altsetting->endpoint->extralen;
 			buffer = intf->cur_altsetting->endpoint->extra;
 		} else {
@@ -937,47 +985,43 @@ static int acm_probe (struct usb_interface *intf,
 	}
 
 	while (buflen > 0) {
-		if (buffer [1] != USB_DT_CS_INTERFACE) {
+		if (buffer[1] != USB_DT_CS_INTERFACE) {
 			dev_err(&intf->dev, "skipping garbage\n");
 			goto next_desc;
 		}
 
-		switch (buffer [2]) {
-			case USB_CDC_UNION_TYPE: /* we've found it */
-				if (union_header) {
-					dev_err(&intf->dev, "More than one "
-						"union descriptor, "
-						"skipping ...\n");
-					goto next_desc;
-				}
-				union_header = (struct usb_cdc_union_desc *)
-							buffer;
-				break;
-			case USB_CDC_COUNTRY_TYPE: /* export through sysfs*/
-				cfd = (struct usb_cdc_country_functional_desc *)buffer;
-				break;
-			case USB_CDC_HEADER_TYPE: /* maybe check version */ 
-				break; /* for now we ignore it */ 
-			case USB_CDC_ACM_TYPE:
-				ac_management_function = buffer[3];
-				break;
-			case USB_CDC_CALL_MANAGEMENT_TYPE:
-				call_management_function = buffer[3];
-				call_interface_num = buffer[4];
-				if ((call_management_function & 3) != 3)
-					dev_err(&intf->dev, "This device "
-						"cannot do calls on its own. "
-						"It is no modem.\n");
-				break;
-			default:
-				/* there are LOTS more CDC descriptors that
-				 * could legitimately be found here.
-				 */
-				dev_dbg(&intf->dev, "Ignoring descriptor: "
-						"type %02x, length %d\n",
-						buffer[2], buffer[0]);
-				break;
+		switch (buffer[2]) {
+		case USB_CDC_UNION_TYPE: /* we've found it */
+			if (union_header) {
+				dev_err(&intf->dev, "More than one "
+					"union descriptor, skipping ...\n");
+				goto next_desc;
 			}
+			union_header = (struct usb_cdc_union_desc *)buffer;
+			break;
+		case USB_CDC_COUNTRY_TYPE: /* export through sysfs*/
+			cfd = (struct usb_cdc_country_functional_desc *)buffer;
+			break;
+		case USB_CDC_HEADER_TYPE: /* maybe check version */
+			break; /* for now we ignore it */
+		case USB_CDC_ACM_TYPE:
+			ac_management_function = buffer[3];
+			break;
+		case USB_CDC_CALL_MANAGEMENT_TYPE:
+			call_management_function = buffer[3];
+			call_interface_num = buffer[4];
+			if ((call_management_function & 3) != 3)
+				dev_err(&intf->dev, "This device cannot do calls on its own. It is not a modem.\n");
+			break;
+		default:
+			/* there are LOTS more CDC descriptors that
+			 * could legitimately be found here.
+			 */
+			dev_dbg(&intf->dev, "Ignoring descriptor: "
+					"type %02x, length %d\n",
+					buffer[2], buffer[0]);
+			break;
+		}
 next_desc:
 		buflen -= buffer[0];
 		buffer += buffer[0];
@@ -985,33 +1029,36 @@ next_desc:
 
 	if (!union_header) {
 		if (call_interface_num > 0) {
-			dev_dbg(&intf->dev,"No union descriptor, using call management descriptor\n");
+			dev_dbg(&intf->dev, "No union descriptor, using call management descriptor\n");
 			data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = call_interface_num));
 			control_interface = intf;
 		} else {
-			dev_dbg(&intf->dev,"No union descriptor, giving up\n");
+			dev_dbg(&intf->dev,
+					"No union descriptor, giving up\n");
 			return -ENODEV;
 		}
 	} else {
 		control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
 		data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0));
 		if (!control_interface || !data_interface) {
-			dev_dbg(&intf->dev,"no interfaces\n");
+			dev_dbg(&intf->dev, "no interfaces\n");
 			return -ENODEV;
 		}
 	}
-	
+
 	if (data_interface_num != call_interface_num)
-		dev_dbg(&intf->dev,"Separate call control interface. That is not fully supported.\n");
+		dev_dbg(&intf->dev, "Separate call control interface. That is not fully supported.\n");
 
 skip_normal_probe:
 
 	/*workaround for switched interfaces */
-	if (data_interface->cur_altsetting->desc.bInterfaceClass != CDC_DATA_INTERFACE_TYPE) {
-		if (control_interface->cur_altsetting->desc.bInterfaceClass == CDC_DATA_INTERFACE_TYPE) {
+	if (data_interface->cur_altsetting->desc.bInterfaceClass
+						!= CDC_DATA_INTERFACE_TYPE) {
+		if (control_interface->cur_altsetting->desc.bInterfaceClass
+						== CDC_DATA_INTERFACE_TYPE) {
 			struct usb_interface *t;
-			dev_dbg(&intf->dev,"Your device has switched interfaces.\n");
-
+			dev_dbg(&intf->dev,
+				"Your device has switched interfaces.\n");
 			t = control_interface;
 			control_interface = data_interface;
 			data_interface = t;
@@ -1023,9 +1070,9 @@ skip_normal_probe:
 	/* Accept probe requests only for the control interface */
 	if (intf != control_interface)
 		return -ENODEV;
-	
+
 	if (usb_interface_claimed(data_interface)) { /* valid in this context */
-		dev_dbg(&intf->dev,"The data interface isn't available\n");
+		dev_dbg(&intf->dev, "The data interface isn't available\n");
 		return -EBUSY;
 	}
 
@@ -1042,8 +1089,8 @@ skip_normal_probe:
 	if (!usb_endpoint_dir_in(epread)) {
 		/* descriptors are swapped */
 		struct usb_endpoint_descriptor *t;
-		dev_dbg(&intf->dev,"The data interface has switched endpoints\n");
-		
+		dev_dbg(&intf->dev,
+			"The data interface has switched endpoints\n");
 		t = epread;
 		epread = epwrite;
 		epwrite = t;
@@ -1056,13 +1103,15 @@ skip_normal_probe:
 		return -ENODEV;
 	}
 
-	if (!(acm = kzalloc(sizeof(struct acm), GFP_KERNEL))) {
+	acm = kzalloc(sizeof(struct acm), GFP_KERNEL);
+	if (acm == NULL) {
 		dev_dbg(&intf->dev, "out of memory (acm kzalloc)\n");
 		goto alloc_fail;
 	}
 
 	ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize);
-	readsize = le16_to_cpu(epread->wMaxPacketSize)* ( quirks == SINGLE_RX_URB ? 1 : 2);
+	readsize = le16_to_cpu(epread->wMaxPacketSize) *
+				(quirks == SINGLE_RX_URB ? 1 : 2);
 	acm->writesize = le16_to_cpu(epwrite->wMaxPacketSize) * 20;
 	acm->control = control_interface;
 	acm->data = data_interface;
@@ -1082,6 +1131,8 @@ skip_normal_probe:
 	spin_lock_init(&acm->read_lock);
 	mutex_init(&acm->mutex);
 	acm->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress);
+	tty_port_init(&acm->port);
+	acm->port.ops = &acm_port_ops;
 
 	buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
 	if (!buf) {
@@ -1103,8 +1154,10 @@ skip_normal_probe:
 	for (i = 0; i < num_rx_buf; i++) {
 		struct acm_ru *rcv = &(acm->ru[i]);
 
-		if (!(rcv->urb = usb_alloc_urb(0, GFP_KERNEL))) {
-			dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)\n");
+		rcv->urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (rcv->urb == NULL) {
+			dev_dbg(&intf->dev,
+				"out of memory (read urbs usb_alloc_urb)\n");
 			goto alloc_fail7;
 		}
 
@@ -1117,26 +1170,29 @@ skip_normal_probe:
 		rb->base = usb_buffer_alloc(acm->dev, readsize,
 				GFP_KERNEL, &rb->dma);
 		if (!rb->base) {
-			dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)\n");
+			dev_dbg(&intf->dev,
+				"out of memory (read bufs usb_buffer_alloc)\n");
 			goto alloc_fail7;
 		}
 	}
-	for(i = 0; i < ACM_NW; i++)
-	{
+	for (i = 0; i < ACM_NW; i++) {
 		struct acm_wb *snd = &(acm->wb[i]);
 
-		if (!(snd->urb = usb_alloc_urb(0, GFP_KERNEL))) {
-			dev_dbg(&intf->dev, "out of memory (write urbs usb_alloc_urb)");
+		snd->urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (snd->urb == NULL) {
+			dev_dbg(&intf->dev,
+				"out of memory (write urbs usb_alloc_urb)");
 			goto alloc_fail7;
 		}
 
-		usb_fill_bulk_urb(snd->urb, usb_dev, usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
-				NULL, acm->writesize, acm_write_bulk, snd);
+		usb_fill_bulk_urb(snd->urb, usb_dev,
+			usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
+			NULL, acm->writesize, acm_write_bulk, snd);
 		snd->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 		snd->instance = acm;
 	}
 
-	usb_set_intfdata (intf, acm);
+	usb_set_intfdata(intf, acm);
 
 	i = device_create_file(&intf->dev, &dev_attr_bmCapabilities);
 	if (i < 0)
@@ -1147,7 +1203,8 @@ skip_normal_probe:
 		if (!acm->country_codes)
 			goto skip_countries;
 		acm->country_code_size = cfd->bLength - 4;
-		memcpy(acm->country_codes, (u8 *)&cfd->wCountyCode0, cfd->bLength - 4);
+		memcpy(acm->country_codes, (u8 *)&cfd->wCountyCode0,
+							cfd->bLength - 4);
 		acm->country_rel_date = cfd->iCountryCodeRelDate;
 
 		i = device_create_file(&intf->dev, &dev_attr_wCountryCodes);
@@ -1156,7 +1213,8 @@ skip_normal_probe:
 			goto skip_countries;
 		}
 
-		i = device_create_file(&intf->dev, &dev_attr_iCountryCodeRelDate);
+		i = device_create_file(&intf->dev,
+						&dev_attr_iCountryCodeRelDate);
 		if (i < 0) {
 			kfree(acm->country_codes);
 			goto skip_countries;
@@ -1164,8 +1222,10 @@ skip_normal_probe:
 	}
 
 skip_countries:
-	usb_fill_int_urb(acm->ctrlurb, usb_dev, usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress),
-			 acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm, epctrl->bInterval);
+	usb_fill_int_urb(acm->ctrlurb, usb_dev,
+			usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress),
+			acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm,
+			epctrl->bInterval);
 	acm->ctrlurb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 	acm->ctrlurb->transfer_dma = acm->ctrl_dma;
 
@@ -1212,7 +1272,7 @@ static void stop_data_traffic(struct acm *acm)
 	tasklet_disable(&acm->urb_task);
 
 	usb_kill_urb(acm->ctrlurb);
-	for(i = 0; i < ACM_NW; i++)
+	for (i = 0; i < ACM_NW; i++)
 		usb_kill_urb(acm->wb[i].urb);
 	for (i = 0; i < acm->rx_buflimit; i++)
 		usb_kill_urb(acm->ru[i].urb);
@@ -1227,13 +1287,14 @@ static void acm_disconnect(struct usb_interface *intf)
 {
 	struct acm *acm = usb_get_intfdata(intf);
 	struct usb_device *usb_dev = interface_to_usbdev(intf);
+	struct tty_struct *tty;
 
 	/* sibling interface is already cleaning up */
 	if (!acm)
 		return;
 
 	mutex_lock(&open_mutex);
-	if (acm->country_codes){
+	if (acm->country_codes) {
 		device_remove_file(&acm->control->dev,
 				&dev_attr_wCountryCodes);
 		device_remove_file(&acm->control->dev,
@@ -1247,22 +1308,25 @@ static void acm_disconnect(struct usb_interface *intf)
 	stop_data_traffic(acm);
 
 	acm_write_buffers_free(acm);
-	usb_buffer_free(usb_dev, acm->ctrlsize, acm->ctrl_buffer, acm->ctrl_dma);
+	usb_buffer_free(usb_dev, acm->ctrlsize, acm->ctrl_buffer,
+								acm->ctrl_dma);
 	acm_read_buffers_free(acm);
 
 	usb_driver_release_interface(&acm_driver, intf == acm->control ?
 					acm->data : acm->control);
 
-	if (!acm->used) {
+	if (acm->port.count == 0) {
 		acm_tty_unregister(acm);
 		mutex_unlock(&open_mutex);
 		return;
 	}
 
 	mutex_unlock(&open_mutex);
-
-	if (acm->tty)
-		tty_hangup(acm->tty);
+	tty = tty_port_tty_get(&acm->port);
+	if (tty) {
+		tty_hangup(tty);
+		tty_kref_put(tty);
+	}
 }
 
 #ifdef CONFIG_PM
@@ -1297,7 +1361,7 @@ static int acm_suspend(struct usb_interface *intf, pm_message_t message)
 	*/
 	mutex_lock(&acm->mutex);
 
-	if (acm->used)
+	if (acm->port.count)
 		stop_data_traffic(acm);
 
 	mutex_unlock(&acm->mutex);
@@ -1319,7 +1383,7 @@ static int acm_resume(struct usb_interface *intf)
 		return 0;
 
 	mutex_lock(&acm->mutex);
-	if (acm->used) {
+	if (acm->port.count) {
 		rv = usb_submit_urb(acm->ctrlurb, GFP_NOIO);
 		if (rv < 0)
 			goto err_out;
@@ -1398,7 +1462,7 @@ static struct usb_device_id acm_ids[] = {
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_ACM_PROTO_AT_GSM) },
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
-		USB_CDC_ACM_PROTO_AT_3G	) },
+		USB_CDC_ACM_PROTO_AT_3G) },
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_ACM_PROTO_AT_CDMA) },
 
@@ -1406,7 +1470,7 @@ static struct usb_device_id acm_ids[] = {
 	{ }
 };
 
-MODULE_DEVICE_TABLE (usb, acm_ids);
+MODULE_DEVICE_TABLE(usb, acm_ids);
 
 static struct usb_driver acm_driver = {
 	.name =		"cdc_acm",
@@ -1429,6 +1493,7 @@ static struct usb_driver acm_driver = {
 static const struct tty_operations acm_ops = {
 	.open =			acm_tty_open,
 	.close =		acm_tty_close,
+	.hangup =		acm_tty_hangup,
 	.write =		acm_tty_write,
 	.write_room =		acm_tty_write_room,
 	.ioctl =		acm_tty_ioctl,
@@ -1460,7 +1525,8 @@ static int __init acm_init(void)
 	acm_tty_driver->subtype = SERIAL_TYPE_NORMAL,
 	acm_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
 	acm_tty_driver->init_termios = tty_std_termios;
-	acm_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+	acm_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD |
+								HUPCL | CLOCAL;
 	tty_set_operations(acm_tty_driver, &acm_ops);
 
 	retval = tty_register_driver(acm_tty_driver);
@@ -1492,7 +1558,7 @@ static void __exit acm_exit(void)
 module_init(acm_init);
 module_exit(acm_exit);
 
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_CHARDEV_MAJOR(ACM_TTY_MAJOR);

drivers/usb/class/cdc-acm.h

@@ -89,8 +89,8 @@ struct acm {
 	struct usb_device *dev;				/* the corresponding usb device */
 	struct usb_interface *control;			/* control interface */
 	struct usb_interface *data;			/* data interface */
-	struct tty_struct *tty;				/* the corresponding tty */
-	struct urb *ctrlurb;			/* urbs */
+	struct tty_port port;			 	/* our tty port data */
+	struct urb *ctrlurb;				/* urbs */
 	u8 *ctrl_buffer;				/* buffers of urbs */
 	dma_addr_t ctrl_dma;				/* dma handles of buffers */
 	u8 *country_codes;				/* country codes from device */
@@ -120,7 +120,6 @@ struct acm {
 	unsigned int ctrlout;				/* output control lines (DTR, RTS) */
 	unsigned int writesize;				/* max packet size for the output bulk endpoint */
 	unsigned int readsize,ctrlsize;			/* buffer sizes for freeing */
-	unsigned int used;				/* someone has this acm's device open */
 	unsigned int minor;				/* acm minor number */
 	unsigned char throttle;				/* throttled by tty layer */
 	unsigned char clocal;				/* termios CLOCAL */

drivers/usb/serial/belkin_sa.c

@@ -93,8 +93,7 @@ static int  belkin_sa_startup(struct usb_serial *serial);
 static void belkin_sa_shutdown(struct usb_serial *serial);
 static int  belkin_sa_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void belkin_sa_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void belkin_sa_close(struct usb_serial_port *port);
 static void belkin_sa_read_int_callback(struct urb *urb);
 static void belkin_sa_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios * old);
@@ -244,8 +243,7 @@ exit:
 } /* belkin_sa_open */
 
 
-static void belkin_sa_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void belkin_sa_close(struct usb_serial_port *port)
 {
 	dbg("%s port %d", __func__, port->number);
 

drivers/usb/serial/ch341.c

@@ -262,13 +262,33 @@ error:	kfree(priv);
 	return r;
 }
 
-static void ch341_close(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static int ch341_carrier_raised(struct usb_serial_port *port)
+{
+	struct ch341_private *priv = usb_get_serial_port_data(port);
+	if (priv->line_status & CH341_BIT_DCD)
+		return 1;
+	return 0;
+}
+
+static void ch341_dtr_rts(struct usb_serial_port *port, int on)
 {
 	struct ch341_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
-	unsigned int c_cflag;
 
+	dbg("%s - port %d", __func__, port->number);
+	/* drop DTR and RTS */
+	spin_lock_irqsave(&priv->lock, flags);
+	if (on)
+		priv->line_control |= CH341_BIT_RTS | CH341_BIT_DTR;
+	else
+		priv->line_control &= ~(CH341_BIT_RTS | CH341_BIT_DTR);
+	spin_unlock_irqrestore(&priv->lock, flags);
+	ch341_set_handshake(port->serial->dev, priv->line_control);
+	wake_up_interruptible(&priv->delta_msr_wait);
+}
+
+static void ch341_close(struct usb_serial_port *port)
+{
 	dbg("%s - port %d", __func__, port->number);
 
 	/* shutdown our urbs */
@@ -276,18 +296,6 @@ static void ch341_close(struct tty_struct *tty, struct usb_serial_port *port,
 	usb_kill_urb(port->write_urb);
 	usb_kill_urb(port->read_urb);
 	usb_kill_urb(port->interrupt_in_urb);
-
-	if (tty) {
-		c_cflag = tty->termios->c_cflag;
-		if (c_cflag & HUPCL) {
-			/* drop DTR and RTS */
-			spin_lock_irqsave(&priv->lock, flags);
-			priv->line_control = 0;
-			spin_unlock_irqrestore(&priv->lock, flags);
-			ch341_set_handshake(port->serial->dev, 0);
-		}
-	}
-	wake_up_interruptible(&priv->delta_msr_wait);
 }
 
 
@@ -302,7 +310,6 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
 	dbg("ch341_open()");
 
 	priv->baud_rate = DEFAULT_BAUD_RATE;
-	priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
 
 	r = ch341_configure(serial->dev, priv);
 	if (r)
@@ -322,7 +329,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
 	if (r) {
 		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
 			" error %d\n", __func__, r);
-		ch341_close(tty, port, NULL);
+		ch341_close(port);
 		return -EPROTO;
 	}
 
@@ -343,9 +350,6 @@ static void ch341_set_termios(struct tty_struct *tty,
 
 	dbg("ch341_set_termios()");
 
-	if (!tty || !tty->termios)
-		return;
-
 	baud_rate = tty_get_baud_rate(tty);
 
 	priv->baud_rate = baud_rate;
@@ -568,6 +572,8 @@ static struct usb_serial_driver ch341_device = {
 	.usb_driver        = &ch341_driver,
 	.num_ports         = 1,
 	.open              = ch341_open,
+	.dtr_rts	   = ch341_dtr_rts,
+	.carrier_raised	   = ch341_carrier_raised,
 	.close             = ch341_close,
 	.ioctl             = ch341_ioctl,
 	.set_termios       = ch341_set_termios,

drivers/usb/serial/console.c

@@ -169,7 +169,9 @@ static int usb_console_setup(struct console *co, char *options)
 			kfree(tty);
 		}
 	}
-
+	/* So we know not to kill the hardware on a hangup on this
+	   port. We have also bumped the use count by one so it won't go
+	   idle */
 	port->console = 1;
 	retval = 0;
 
@@ -182,7 +184,7 @@ free_tty:
 	kfree(tty);
 reset_open_count:
 	port->port.count = 0;
-goto out;
+	goto out;
 }
 
 static void usb_console_write(struct console *co,

drivers/usb/serial/cp210x.c

@@ -1,5 +1,5 @@
 /*
- * Silicon Laboratories CP2101/CP2102 USB to RS232 serial adaptor driver
+ * Silicon Laboratories CP210x USB to RS232 serial adaptor driver
  *
  * Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk)
  *
@@ -27,44 +27,46 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v0.08"
-#define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver"
+#define DRIVER_VERSION "v0.09"
+#define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver"
 
 /*
  * Function Prototypes
  */
-static int cp2101_open(struct tty_struct *, struct usb_serial_port *,
+static int cp210x_open(struct tty_struct *, struct usb_serial_port *,
 							struct file *);
-static void cp2101_cleanup(struct usb_serial_port *);
-static void cp2101_close(struct tty_struct *, struct usb_serial_port *,
-							struct file*);
-static void cp2101_get_termios(struct tty_struct *,
+static void cp210x_cleanup(struct usb_serial_port *);
+static void cp210x_close(struct usb_serial_port *);
+static void cp210x_get_termios(struct tty_struct *,
 	struct usb_serial_port *port);
-static void cp2101_get_termios_port(struct usb_serial_port *port,
+static void cp210x_get_termios_port(struct usb_serial_port *port,
 	unsigned int *cflagp, unsigned int *baudp);
-static void cp2101_set_termios(struct tty_struct *, struct usb_serial_port *,
+static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
 							struct ktermios*);
-static int cp2101_tiocmget(struct tty_struct *, struct file *);
-static int cp2101_tiocmset(struct tty_struct *, struct file *,
+static int cp210x_tiocmget(struct tty_struct *, struct file *);
+static int cp210x_tiocmset(struct tty_struct *, struct file *,
 		unsigned int, unsigned int);
-static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *,
+static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *,
 		unsigned int, unsigned int);
-static void cp2101_break_ctl(struct tty_struct *, int);
-static int cp2101_startup(struct usb_serial *);
-static void cp2101_shutdown(struct usb_serial *);
+static void cp210x_break_ctl(struct tty_struct *, int);
+static int cp210x_startup(struct usb_serial *);
+static void cp210x_shutdown(struct usb_serial *);
 
 static int debug;
 
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
 	{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
+	{ USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
 	{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
+	{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
 	{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
 	{ USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
 	{ USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
 	{ USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
 	{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
 	{ USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
+	{ USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
 	{ USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
 	{ USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
 	{ USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
@@ -85,10 +87,12 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
 	{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
 	{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
+	{ USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
 	{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
 	{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
 	{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */
 	{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
+	{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
 	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
 	{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
@@ -99,7 +103,9 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */
 	{ USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
 	{ USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
+	{ USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
 	{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
+	{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
 	{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
 	{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
@@ -108,53 +114,70 @@ static struct usb_device_id id_table [] = {
 
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver cp2101_driver = {
-	.name		= "cp2101",
+static struct usb_driver cp210x_driver = {
+	.name		= "cp210x",
 	.probe		= usb_serial_probe,
 	.disconnect	= usb_serial_disconnect,
 	.id_table	= id_table,
 	.no_dynamic_id	= 	1,
 };
 
-static struct usb_serial_driver cp2101_device = {
+static struct usb_serial_driver cp210x_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
-		.name = 	"cp2101",
+		.name = 	"cp210x",
 	},
-	.usb_driver		= &cp2101_driver,
+	.usb_driver		= &cp210x_driver,
 	.id_table		= id_table,
 	.num_ports		= 1,
-	.open			= cp2101_open,
-	.close			= cp2101_close,
-	.break_ctl		= cp2101_break_ctl,
-	.set_termios		= cp2101_set_termios,
-	.tiocmget 		= cp2101_tiocmget,
-	.tiocmset		= cp2101_tiocmset,
-	.attach			= cp2101_startup,
-	.shutdown		= cp2101_shutdown,
+	.open			= cp210x_open,
+	.close			= cp210x_close,
+	.break_ctl		= cp210x_break_ctl,
+	.set_termios		= cp210x_set_termios,
+	.tiocmget 		= cp210x_tiocmget,
+	.tiocmset		= cp210x_tiocmset,
+	.attach			= cp210x_startup,
+	.shutdown		= cp210x_shutdown,
 };
 
 /* Config request types */
 #define REQTYPE_HOST_TO_DEVICE	0x41
 #define REQTYPE_DEVICE_TO_HOST	0xc1
 
-/* Config SET requests. To GET, add 1 to the request number */
-#define CP2101_UART 		0x00	/* Enable / Disable */
-#define CP2101_BAUDRATE		0x01	/* (BAUD_RATE_GEN_FREQ / baudrate) */
-#define CP2101_BITS		0x03	/* 0x(0)(databits)(parity)(stopbits) */
-#define CP2101_BREAK		0x05	/* On / Off */
-#define CP2101_CONTROL		0x07	/* Flow control line states */
-#define CP2101_MODEMCTL		0x13	/* Modem controls */
-#define CP2101_CONFIG_6		0x19	/* 6 bytes of config data ??? */
-
-/* CP2101_UART */
+/* Config request codes */
+#define CP210X_IFC_ENABLE	0x00
+#define CP210X_SET_BAUDDIV	0x01
+#define CP210X_GET_BAUDDIV	0x02
+#define CP210X_SET_LINE_CTL	0x03
+#define CP210X_GET_LINE_CTL	0x04
+#define CP210X_SET_BREAK	0x05
+#define CP210X_IMM_CHAR		0x06
+#define CP210X_SET_MHS		0x07
+#define CP210X_GET_MDMSTS	0x08
+#define CP210X_SET_XON		0x09
+#define CP210X_SET_XOFF		0x0A
+#define CP210X_SET_EVENTMASK	0x0B
+#define CP210X_GET_EVENTMASK	0x0C
+#define CP210X_SET_CHAR		0x0D
+#define CP210X_GET_CHARS	0x0E
+#define CP210X_GET_PROPS	0x0F
+#define CP210X_GET_COMM_STATUS	0x10
+#define CP210X_RESET		0x11
+#define CP210X_PURGE		0x12
+#define CP210X_SET_FLOW		0x13
+#define CP210X_GET_FLOW		0x14
+#define CP210X_EMBED_EVENTS	0x15
+#define CP210X_GET_EVENTSTATE	0x16
+#define CP210X_SET_CHARS	0x19
+
+/* CP210X_IFC_ENABLE */
 #define UART_ENABLE		0x0001
 #define UART_DISABLE		0x0000
 
-/* CP2101_BAUDRATE */
+/* CP210X_(SET|GET)_BAUDDIV */
 #define BAUD_RATE_GEN_FREQ	0x384000
 
-/* CP2101_BITS */
+/* CP210X_(SET|GET)_LINE_CTL */
 #define BITS_DATA_MASK		0X0f00
 #define BITS_DATA_5		0X0500
 #define BITS_DATA_6		0X0600
@@ -174,11 +197,11 @@ static struct usb_serial_driver cp2101_device = {
 #define BITS_STOP_1_5		0x0001
 #define BITS_STOP_2		0x0002
 
-/* CP2101_BREAK */
+/* CP210X_SET_BREAK */
 #define BREAK_ON		0x0000
 #define BREAK_OFF		0x0001
 
-/* CP2101_CONTROL */
+/* CP210X_(SET_MHS|GET_MDMSTS) */
 #define CONTROL_DTR		0x0001
 #define CONTROL_RTS		0x0002
 #define CONTROL_CTS		0x0010
@@ -189,13 +212,13 @@ static struct usb_serial_driver cp2101_device = {
 #define CONTROL_WRITE_RTS	0x0200
 
 /*
- * cp2101_get_config
- * Reads from the CP2101 configuration registers
+ * cp210x_get_config
+ * Reads from the CP210x configuration registers
  * 'size' is specified in bytes.
  * 'data' is a pointer to a pre-allocated array of integers large
  * enough to hold 'size' bytes (with 4 bytes to each integer)
  */
-static int cp2101_get_config(struct usb_serial_port *port, u8 request,
+static int cp210x_get_config(struct usb_serial_port *port, u8 request,
 		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
@@ -211,9 +234,6 @@ static int cp2101_get_config(struct usb_serial_port *port, u8 request,
 		return -ENOMEM;
 	}
 
-	/* For get requests, the request number must be incremented */
-	request++;
-
 	/* Issue the request, attempting to read 'size' bytes */
 	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 				request, REQTYPE_DEVICE_TO_HOST, 0x0000,
@@ -236,12 +256,12 @@ static int cp2101_get_config(struct usb_serial_port *port, u8 request,
 }
 
 /*
- * cp2101_set_config
- * Writes to the CP2101 configuration registers
+ * cp210x_set_config
+ * Writes to the CP210x configuration registers
  * Values less than 16 bits wide are sent directly
  * 'size' is specified in bytes.
  */
-static int cp2101_set_config(struct usb_serial_port *port, u8 request,
+static int cp210x_set_config(struct usb_serial_port *port, u8 request,
 		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
@@ -292,21 +312,21 @@ static int cp2101_set_config(struct usb_serial_port *port, u8 request,
 }
 
 /*
- * cp2101_set_config_single
- * Convenience function for calling cp2101_set_config on single data values
+ * cp210x_set_config_single
+ * Convenience function for calling cp210x_set_config on single data values
  * without requiring an integer pointer
  */
-static inline int cp2101_set_config_single(struct usb_serial_port *port,
+static inline int cp210x_set_config_single(struct usb_serial_port *port,
 		u8 request, unsigned int data)
 {
-	return cp2101_set_config(port, request, &data, 2);
+	return cp210x_set_config(port, request, &data, 2);
 }
 
 /*
- * cp2101_quantise_baudrate
+ * cp210x_quantise_baudrate
  * Quantises the baud rate as per AN205 Table 1
  */
-static unsigned int cp2101_quantise_baudrate(unsigned int baud) {
+static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
 	if      (baud <= 56)       baud = 0;
 	else if (baud <= 300)      baud = 300;
 	else if (baud <= 600)      baud = 600;
@@ -343,7 +363,7 @@ static unsigned int cp2101_quantise_baudrate(unsigned int baud) {
 	return baud;
 }
 
-static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port,
+static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port,
 				struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
@@ -351,7 +371,7 @@ static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port,
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (cp2101_set_config_single(port, CP2101_UART, UART_ENABLE)) {
+	if (cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_ENABLE)) {
 		dev_err(&port->dev, "%s - Unable to enable UART\n",
 				__func__);
 		return -EPROTO;
@@ -373,17 +393,17 @@ static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port,
 	}
 
 	/* Configure the termios structure */
-	cp2101_get_termios(tty, port);
+	cp210x_get_termios(tty, port);
 
 	/* Set the DTR and RTS pins low */
-	cp2101_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data
+	cp210x_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data
 			: port,
 		NULL, TIOCM_DTR | TIOCM_RTS, 0);
 
 	return 0;
 }
 
-static void cp2101_cleanup(struct usb_serial_port *port)
+static void cp210x_cleanup(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 
@@ -398,8 +418,7 @@ static void cp2101_cleanup(struct usb_serial_port *port)
 	}
 }
 
-static void cp2101_close(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filp)
+static void cp210x_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 
@@ -410,23 +429,23 @@ static void cp2101_close(struct tty_struct *tty, struct usb_serial_port *port,
 
 	mutex_lock(&port->serial->disc_mutex);
 	if (!port->serial->disconnected)
-		cp2101_set_config_single(port, CP2101_UART, UART_DISABLE);
+		cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE);
 	mutex_unlock(&port->serial->disc_mutex);
 }
 
 /*
- * cp2101_get_termios
+ * cp210x_get_termios
  * Reads the baud rate, data bits, parity, stop bits and flow control mode
  * from the device, corrects any unsupported values, and configures the
  * termios structure to reflect the state of the device
  */
-static void cp2101_get_termios(struct tty_struct *tty,
+static void cp210x_get_termios(struct tty_struct *tty,
 	struct usb_serial_port *port)
 {
 	unsigned int baud;
 
 	if (tty) {
-		cp2101_get_termios_port(tty->driver_data,
+		cp210x_get_termios_port(tty->driver_data,
 			&tty->termios->c_cflag, &baud);
 		tty_encode_baud_rate(tty, baud, baud);
 	}
@@ -434,15 +453,15 @@ static void cp2101_get_termios(struct tty_struct *tty,
 	else {
 		unsigned int cflag;
 		cflag = 0;
-		cp2101_get_termios_port(port, &cflag, &baud);
+		cp210x_get_termios_port(port, &cflag, &baud);
 	}
 }
 
 /*
- * cp2101_get_termios_port
- * This is the heart of cp2101_get_termios which always uses a &usb_serial_port.
+ * cp210x_get_termios_port
+ * This is the heart of cp210x_get_termios which always uses a &usb_serial_port.
  */
-static void cp2101_get_termios_port(struct usb_serial_port *port,
+static void cp210x_get_termios_port(struct usb_serial_port *port,
 	unsigned int *cflagp, unsigned int *baudp)
 {
 	unsigned int cflag, modem_ctl[4];
@@ -451,17 +470,17 @@ static void cp2101_get_termios_port(struct usb_serial_port *port,
 
 	dbg("%s - port %d", __func__, port->number);
 
-	cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2);
+	cp210x_get_config(port, CP210X_GET_BAUDDIV, &baud, 2);
 	/* Convert to baudrate */
 	if (baud)
-		baud = cp2101_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud);
+		baud = cp210x_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud);
 
 	dbg("%s - baud rate = %d", __func__, baud);
 	*baudp = baud;
 
 	cflag = *cflagp;
 
-	cp2101_get_config(port, CP2101_BITS, &bits, 2);
+	cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
 	cflag &= ~CSIZE;
 	switch (bits & BITS_DATA_MASK) {
 	case BITS_DATA_5:
@@ -486,14 +505,14 @@ static void cp2101_get_termios_port(struct usb_serial_port *port,
 		cflag |= CS8;
 		bits &= ~BITS_DATA_MASK;
 		bits |= BITS_DATA_8;
-		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 		break;
 	default:
 		dbg("%s - Unknown number of data bits, using 8", __func__);
 		cflag |= CS8;
 		bits &= ~BITS_DATA_MASK;
 		bits |= BITS_DATA_8;
-		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 		break;
 	}
 
@@ -516,20 +535,20 @@ static void cp2101_get_termios_port(struct usb_serial_port *port,
 				__func__);
 		cflag &= ~PARENB;
 		bits &= ~BITS_PARITY_MASK;
-		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 		break;
 	case BITS_PARITY_SPACE:
 		dbg("%s - parity = SPACE (not supported, disabling parity)",
 				__func__);
 		cflag &= ~PARENB;
 		bits &= ~BITS_PARITY_MASK;
-		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 		break;
 	default:
 		dbg("%s - Unknown parity mode, disabling parity", __func__);
 		cflag &= ~PARENB;
 		bits &= ~BITS_PARITY_MASK;
-		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 		break;
 	}
 
@@ -542,7 +561,7 @@ static void cp2101_get_termios_port(struct usb_serial_port *port,
 		dbg("%s - stop bits = 1.5 (not supported, using 1 stop bit)",
 								__func__);
 		bits &= ~BITS_STOP_MASK;
-		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 		break;
 	case BITS_STOP_2:
 		dbg("%s - stop bits = 2", __func__);
@@ -552,11 +571,11 @@ static void cp2101_get_termios_port(struct usb_serial_port *port,
 		dbg("%s - Unknown number of stop bits, using 1 stop bit",
 								__func__);
 		bits &= ~BITS_STOP_MASK;
-		cp2101_set_config(port, CP2101_BITS, &bits, 2);
+		cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
 		break;
 	}
 
-	cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+	cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
 	if (modem_ctl[0] & 0x0008) {
 		dbg("%s - flow control = CRTSCTS", __func__);
 		cflag |= CRTSCTS;
@@ -568,7 +587,7 @@ static void cp2101_get_termios_port(struct usb_serial_port *port,
 	*cflagp = cflag;
 }
 
-static void cp2101_set_termios(struct tty_struct *tty,
+static void cp210x_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	unsigned int cflag, old_cflag;
@@ -583,13 +602,13 @@ static void cp2101_set_termios(struct tty_struct *tty,
 	tty->termios->c_cflag &= ~CMSPAR;
 	cflag = tty->termios->c_cflag;
 	old_cflag = old_termios->c_cflag;
-	baud = cp2101_quantise_baudrate(tty_get_baud_rate(tty));
+	baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty));
 
 	/* If the baud rate is to be updated*/
 	if (baud != tty_termios_baud_rate(old_termios) && baud != 0) {
 		dbg("%s - Setting baud rate to %d baud", __func__,
 				baud);
-		if (cp2101_set_config_single(port, CP2101_BAUDRATE,
+		if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV,
 					((BAUD_RATE_GEN_FREQ + baud/2) / baud))) {
 			dbg("Baud rate requested not supported by device\n");
 			baud = tty_termios_baud_rate(old_termios);
@@ -600,7 +619,7 @@ static void cp2101_set_termios(struct tty_struct *tty,
 
 	/* If the number of data bits is to be updated */
 	if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
-		cp2101_get_config(port, CP2101_BITS, &bits, 2);
+		cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
 		bits &= ~BITS_DATA_MASK;
 		switch (cflag & CSIZE) {
 		case CS5:
@@ -624,19 +643,19 @@ static void cp2101_set_termios(struct tty_struct *tty,
 			dbg("%s - data bits = 9", __func__);
 			break;*/
 		default:
-			dbg("cp2101 driver does not "
+			dbg("cp210x driver does not "
 					"support the number of bits requested,"
 					" using 8 bit mode\n");
 				bits |= BITS_DATA_8;
 				break;
 		}
-		if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
+		if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
 			dbg("Number of data bits requested "
 					"not supported by device\n");
 	}
 
 	if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) {
-		cp2101_get_config(port, CP2101_BITS, &bits, 2);
+		cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
 		bits &= ~BITS_PARITY_MASK;
 		if (cflag & PARENB) {
 			if (cflag & PARODD) {
@@ -647,13 +666,13 @@ static void cp2101_set_termios(struct tty_struct *tty,
 				dbg("%s - parity = EVEN", __func__);
 			}
 		}
-		if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
+		if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
 			dbg("Parity mode not supported "
 					"by device\n");
 	}
 
 	if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
-		cp2101_get_config(port, CP2101_BITS, &bits, 2);
+		cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
 		bits &= ~BITS_STOP_MASK;
 		if (cflag & CSTOPB) {
 			bits |= BITS_STOP_2;
@@ -662,13 +681,13 @@ static void cp2101_set_termios(struct tty_struct *tty,
 			bits |= BITS_STOP_1;
 			dbg("%s - stop bits = 1", __func__);
 		}
-		if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
+		if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
 			dbg("Number of stop bits requested "
 					"not supported by device\n");
 	}
 
 	if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
-		cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+		cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
 		dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
 				__func__, modem_ctl[0], modem_ctl[1],
 				modem_ctl[2], modem_ctl[3]);
@@ -688,19 +707,19 @@ static void cp2101_set_termios(struct tty_struct *tty,
 		dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
 				__func__, modem_ctl[0], modem_ctl[1],
 				modem_ctl[2], modem_ctl[3]);
-		cp2101_set_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+		cp210x_set_config(port, CP210X_SET_FLOW, modem_ctl, 16);
 	}
 
 }
 
-static int cp2101_tiocmset (struct tty_struct *tty, struct file *file,
+static int cp210x_tiocmset (struct tty_struct *tty, struct file *file,
 		unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	return cp2101_tiocmset_port(port, file, set, clear);
+	return cp210x_tiocmset_port(port, file, set, clear);
 }
 
-static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *file,
+static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *file,
 		unsigned int set, unsigned int clear)
 {
 	unsigned int control = 0;
@@ -726,10 +745,10 @@ static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *file,
 
 	dbg("%s - control = 0x%.4x", __func__, control);
 
-	return cp2101_set_config(port, CP2101_CONTROL, &control, 2);
+	return cp210x_set_config(port, CP210X_SET_MHS, &control, 2);
 }
 
-static int cp2101_tiocmget (struct tty_struct *tty, struct file *file)
+static int cp210x_tiocmget (struct tty_struct *tty, struct file *file)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	unsigned int control;
@@ -737,7 +756,7 @@ static int cp2101_tiocmget (struct tty_struct *tty, struct file *file)
 
 	dbg("%s - port %d", __func__, port->number);
 
-	cp2101_get_config(port, CP2101_CONTROL, &control, 1);
+	cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1);
 
 	result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
 		|((control & CONTROL_RTS) ? TIOCM_RTS : 0)
@@ -751,7 +770,7 @@ static int cp2101_tiocmget (struct tty_struct *tty, struct file *file)
 	return result;
 }
 
-static void cp2101_break_ctl (struct tty_struct *tty, int break_state)
+static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	unsigned int state;
@@ -763,17 +782,17 @@ static void cp2101_break_ctl (struct tty_struct *tty, int break_state)
 		state = BREAK_ON;
 	dbg("%s - turning break %s", __func__,
 			state == BREAK_OFF ? "off" : "on");
-	cp2101_set_config(port, CP2101_BREAK, &state, 2);
+	cp210x_set_config(port, CP210X_SET_BREAK, &state, 2);
 }
 
-static int cp2101_startup(struct usb_serial *serial)
+static int cp210x_startup(struct usb_serial *serial)
 {
-	/* CP2101 buffers behave strangely unless device is reset */
+	/* cp210x buffers behave strangely unless device is reset */
 	usb_reset_device(serial->dev);
 	return 0;
 }
 
-static void cp2101_shutdown(struct usb_serial *serial)
+static void cp210x_shutdown(struct usb_serial *serial)
 {
 	int i;
 
@@ -781,21 +800,21 @@ static void cp2101_shutdown(struct usb_serial *serial)
 
 	/* Stop reads and writes on all ports */
 	for (i = 0; i < serial->num_ports; ++i)
-		cp2101_cleanup(serial->port[i]);
+		cp210x_cleanup(serial->port[i]);
 }
 
-static int __init cp2101_init(void)
+static int __init cp210x_init(void)
 {
 	int retval;
 
-	retval = usb_serial_register(&cp2101_device);
+	retval = usb_serial_register(&cp210x_device);
 	if (retval)
 		return retval; /* Failed to register */
 
-	retval = usb_register(&cp2101_driver);
+	retval = usb_register(&cp210x_driver);
 	if (retval) {
 		/* Failed to register */
-		usb_serial_deregister(&cp2101_device);
+		usb_serial_deregister(&cp210x_device);
 		return retval;
 	}
 
@@ -805,14 +824,14 @@ static int __init cp2101_init(void)
 	return 0;
 }
 
-static void __exit cp2101_exit(void)
+static void __exit cp210x_exit(void)
 {
-	usb_deregister(&cp2101_driver);
-	usb_serial_deregister(&cp2101_device);
+	usb_deregister(&cp210x_driver);
+	usb_serial_deregister(&cp210x_device);
 }
 
-module_init(cp2101_init);
-module_exit(cp2101_exit);
+module_init(cp210x_init);
+module_exit(cp210x_exit);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);

drivers/usb/serial/cyberjack.c

@@ -61,8 +61,7 @@ static int cyberjack_startup(struct usb_serial *serial);
 static void cyberjack_shutdown(struct usb_serial *serial);
 static int  cyberjack_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void cyberjack_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void cyberjack_close(struct usb_serial_port *port);
 static int cyberjack_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count);
 static int cyberjack_write_room(struct tty_struct *tty);
@@ -185,8 +184,7 @@ static int  cyberjack_open(struct tty_struct *tty,
 	return result;
 }
 
-static void cyberjack_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void cyberjack_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 

drivers/usb/serial/cypress_m8.c

@@ -174,8 +174,8 @@ static int  cypress_ca42v2_startup(struct usb_serial *serial);
 static void cypress_shutdown(struct usb_serial *serial);
 static int  cypress_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void cypress_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void cypress_close(struct usb_serial_port *port);
+static void cypress_dtr_rts(struct usb_serial_port *port, int on);
 static int  cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count);
 static void cypress_send(struct usb_serial_port *port);
@@ -218,6 +218,7 @@ static struct usb_serial_driver cypress_earthmate_device = {
 	.shutdown =			cypress_shutdown,
 	.open =				cypress_open,
 	.close =			cypress_close,
+	.dtr_rts =			cypress_dtr_rts,
 	.write =			cypress_write,
 	.write_room =			cypress_write_room,
 	.ioctl =			cypress_ioctl,
@@ -244,6 +245,7 @@ static struct usb_serial_driver cypress_hidcom_device = {
 	.shutdown =			cypress_shutdown,
 	.open =				cypress_open,
 	.close =			cypress_close,
+	.dtr_rts =			cypress_dtr_rts,
 	.write =			cypress_write,
 	.write_room =			cypress_write_room,
 	.ioctl =			cypress_ioctl,
@@ -270,6 +272,7 @@ static struct usb_serial_driver cypress_ca42v2_device = {
 	.shutdown =			cypress_shutdown,
 	.open =				cypress_open,
 	.close =			cypress_close,
+	.dtr_rts =			cypress_dtr_rts,
 	.write =			cypress_write,
 	.write_room =			cypress_write_room,
 	.ioctl =			cypress_ioctl,
@@ -656,11 +659,7 @@ static int cypress_open(struct tty_struct *tty,
 	priv->rx_flags = 0;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/* raise both lines and set termios */
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->line_control = CONTROL_DTR | CONTROL_RTS;
-	priv->cmd_ctrl = 1;
-	spin_unlock_irqrestore(&priv->lock, flags);
+	/* Set termios */
 	result = cypress_write(tty, port, NULL, 0);
 
 	if (result) {
@@ -694,76 +693,42 @@ static int cypress_open(struct tty_struct *tty,
 							__func__, result);
 		cypress_set_dead(port);
 	}
-
+	port->port.drain_delay = 256;
 	return result;
 } /* cypress_open */
 
+static void cypress_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct cypress_private *priv = usb_get_serial_port_data(port);
+	/* drop dtr and rts */
+	priv = usb_get_serial_port_data(port);
+	spin_lock_irq(&priv->lock);
+	if (on == 0)
+		priv->line_control = 0;
+	else 
+		priv->line_control = CONTROL_DTR | CONTROL_RTS;
+	priv->cmd_ctrl = 1;
+	spin_unlock_irq(&priv->lock);
+	cypress_write(NULL, port, NULL, 0);
+}
 
-static void cypress_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void cypress_close(struct usb_serial_port *port)
 {
 	struct cypress_private *priv = usb_get_serial_port_data(port);
-	unsigned int c_cflag;
-	int bps;
-	long timeout;
-	wait_queue_t wait;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/* wait for data to drain from buffer */
-	spin_lock_irq(&priv->lock);
-	timeout = CYPRESS_CLOSING_WAIT;
-	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&tty->write_wait, &wait);
-	for (;;) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (cypress_buf_data_avail(priv->buf) == 0
-		|| timeout == 0 || signal_pending(current)
-		/* without mutex, allowed due to harmless failure mode */
-		|| port->serial->disconnected)
-			break;
-		spin_unlock_irq(&priv->lock);
-		timeout = schedule_timeout(timeout);
-		spin_lock_irq(&priv->lock);
-	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&tty->write_wait, &wait);
-	/* clear out any remaining data in the buffer */
-	cypress_buf_clear(priv->buf);
-	spin_unlock_irq(&priv->lock);
-
 	/* writing is potentially harmful, lock must be taken */
 	mutex_lock(&port->serial->disc_mutex);
 	if (port->serial->disconnected) {
 		mutex_unlock(&port->serial->disc_mutex);
 		return;
 	}
-	/* wait for characters to drain from device */
-	if (tty) {
-		bps = tty_get_baud_rate(tty);
-		if (bps > 1200)
-			timeout = max((HZ * 2560) / bps, HZ / 10);
-		else
-			timeout = 2 * HZ;
-		schedule_timeout_interruptible(timeout);
-	}
-
+	cypress_buf_clear(priv->buf);
 	dbg("%s - stopping urbs", __func__);
 	usb_kill_urb(port->interrupt_in_urb);
 	usb_kill_urb(port->interrupt_out_urb);
 
-	if (tty) {
-		c_cflag = tty->termios->c_cflag;
-		if (c_cflag & HUPCL) {
-			/* drop dtr and rts */
-			priv = usb_get_serial_port_data(port);
-			spin_lock_irq(&priv->lock);
-			priv->line_control = 0;
-			priv->cmd_ctrl = 1;
-			spin_unlock_irq(&priv->lock);
-			cypress_write(tty, port, NULL, 0);
-		}
-	}
 
 	if (stats)
 		dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",

drivers/usb/serial/digi_acceleport.c

@@ -422,7 +422,6 @@ struct digi_port {
 	int dp_throttled;
 	int dp_throttle_restart;
 	wait_queue_head_t dp_flush_wait;
-	int dp_in_close;			/* close in progress */
 	wait_queue_head_t dp_close_wait;	/* wait queue for close */
 	struct work_struct dp_wakeup_work;
 	struct usb_serial_port *dp_port;
@@ -456,8 +455,9 @@ static int digi_write_room(struct tty_struct *tty);
 static int digi_chars_in_buffer(struct tty_struct *tty);
 static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
 	struct file *filp);
-static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
-	struct file *filp);
+static void digi_close(struct usb_serial_port *port);
+static int digi_carrier_raised(struct usb_serial_port *port);
+static void digi_dtr_rts(struct usb_serial_port *port, int on);
 static int digi_startup_device(struct usb_serial *serial);
 static int digi_startup(struct usb_serial *serial);
 static void digi_shutdown(struct usb_serial *serial);
@@ -510,6 +510,8 @@ static struct usb_serial_driver digi_acceleport_2_device = {
 	.num_ports =			3,
 	.open =				digi_open,
 	.close =			digi_close,
+	.dtr_rts =			digi_dtr_rts,
+	.carrier_raised =		digi_carrier_raised,
 	.write =			digi_write,
 	.write_room =			digi_write_room,
 	.write_bulk_callback = 		digi_write_bulk_callback,
@@ -1328,6 +1330,19 @@ static int digi_chars_in_buffer(struct tty_struct *tty)
 
 }
 
+static void digi_dtr_rts(struct usb_serial_port *port, int on)
+{
+	/* Adjust DTR and RTS */
+	digi_set_modem_signals(port, on * (TIOCM_DTR|TIOCM_RTS), 1);
+}
+
+static int digi_carrier_raised(struct usb_serial_port *port)
+{
+	struct digi_port *priv = usb_get_serial_port_data(port);
+	if (priv->dp_modem_signals & TIOCM_CD)
+		return 1;
+	return 0;
+}
 
 static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
 				struct file *filp)
@@ -1336,7 +1351,6 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
 	unsigned char buf[32];
 	struct digi_port *priv = usb_get_serial_port_data(port);
 	struct ktermios not_termios;
-	unsigned long flags = 0;
 
 	dbg("digi_open: TOP: port=%d, open_count=%d",
 		priv->dp_port_num, port->port.count);
@@ -1345,26 +1359,6 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
 	if (digi_startup_device(port->serial) != 0)
 		return -ENXIO;
 
-	spin_lock_irqsave(&priv->dp_port_lock, flags);
-
-	/* don't wait on a close in progress for non-blocking opens */
-	if (priv->dp_in_close && (filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0) {
-		spin_unlock_irqrestore(&priv->dp_port_lock, flags);
-		return -EAGAIN;
-	}
-
-	/* wait for a close in progress to finish */
-	while (priv->dp_in_close) {
-		cond_wait_interruptible_timeout_irqrestore(
-			&priv->dp_close_wait, DIGI_RETRY_TIMEOUT,
-			&priv->dp_port_lock, flags);
-		if (signal_pending(current))
-			return -EINTR;
-		spin_lock_irqsave(&priv->dp_port_lock, flags);
-	}
-
-	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
-
 	/* read modem signals automatically whenever they change */
 	buf[0] = DIGI_CMD_READ_INPUT_SIGNALS;
 	buf[1] = priv->dp_port_num;
@@ -1387,16 +1381,11 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
 		not_termios.c_iflag = ~tty->termios->c_iflag;
 		digi_set_termios(tty, port, &not_termios);
 	}
-
-	/* set DTR and RTS */
-	digi_set_modem_signals(port, TIOCM_DTR|TIOCM_RTS, 1);
-
 	return 0;
 }
 
 
-static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static void digi_close(struct usb_serial_port *port)
 {
 	DEFINE_WAIT(wait);
 	int ret;
@@ -1411,28 +1400,9 @@ static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
 	if (port->serial->disconnected)
 		goto exit;
 
-	/* do cleanup only after final close on this port */
-	spin_lock_irq(&priv->dp_port_lock);
-	priv->dp_in_close = 1;
-	spin_unlock_irq(&priv->dp_port_lock);
-
-	/* tell line discipline to process only XON/XOFF */
-	tty->closing = 1;
-
-	/* wait for output to drain */
-	if ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0)
-		tty_wait_until_sent(tty, DIGI_CLOSE_TIMEOUT);
-
-	/* flush driver and line discipline buffers */
-	tty_driver_flush_buffer(tty);
-	tty_ldisc_flush(tty);
-
 	if (port->serial->dev) {
-		/* wait for transmit idle */
-		if ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) == 0)
-			digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
-		/* drop DTR and RTS */
-		digi_set_modem_signals(port, 0, 0);
+		/* FIXME: Transmit idle belongs in the wait_unti_sent path */
+		digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT);
 
 		/* disable input flow control */
 		buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL;
@@ -1477,11 +1447,9 @@ static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
 		/* shutdown any outstanding bulk writes */
 		usb_kill_urb(port->write_urb);
 	}
-	tty->closing = 0;
 exit:
 	spin_lock_irq(&priv->dp_port_lock);
 	priv->dp_write_urb_in_use = 0;
-	priv->dp_in_close = 0;
 	wake_up_interruptible(&priv->dp_close_wait);
 	spin_unlock_irq(&priv->dp_port_lock);
 	mutex_unlock(&port->serial->disc_mutex);
@@ -1560,7 +1528,6 @@ static int digi_startup(struct usb_serial *serial)
 		priv->dp_throttled = 0;
 		priv->dp_throttle_restart = 0;
 		init_waitqueue_head(&priv->dp_flush_wait);
-		priv->dp_in_close = 0;
 		init_waitqueue_head(&priv->dp_close_wait);
 		INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
 		priv->dp_port = serial->port[i];

drivers/usb/serial/empeg.c

@@ -81,8 +81,7 @@ static int debug;
 /* function prototypes for an empeg-car player */
 static int  empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
 						struct file *filp);
-static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port,
-						struct file *filp);
+static void empeg_close(struct usb_serial_port *port);
 static int  empeg_write(struct tty_struct *tty, struct usb_serial_port *port,
 						const unsigned char *buf,
 						int count);
@@ -181,8 +180,7 @@ static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
 }
 
 
-static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static void empeg_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 

drivers/usb/serial/ftdi_sio.c

@@ -89,6 +89,7 @@ struct ftdi_private {
 	int force_rtscts;	/* if non-zero, force RTS-CTS to always
 				   be enabled */
 
+	unsigned int latency;		/* latency setting in use */
 	spinlock_t tx_lock;	/* spinlock for transmit state */
 	unsigned long tx_bytes;
 	unsigned long tx_outstanding_bytes;
@@ -719,8 +720,8 @@ static int  ftdi_sio_port_probe(struct usb_serial_port *port);
 static int  ftdi_sio_port_remove(struct usb_serial_port *port);
 static int  ftdi_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void ftdi_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void ftdi_close(struct usb_serial_port *port);
+static void ftdi_dtr_rts(struct usb_serial_port *port, int on);
 static int  ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count);
 static int  ftdi_write_room(struct tty_struct *tty);
@@ -758,6 +759,7 @@ static struct usb_serial_driver ftdi_sio_device = {
 	.port_remove =		ftdi_sio_port_remove,
 	.open =			ftdi_open,
 	.close =		ftdi_close,
+	.dtr_rts =		ftdi_dtr_rts,
 	.throttle =		ftdi_throttle,
 	.unthrottle =		ftdi_unthrottle,
 	.write =		ftdi_write,
@@ -1037,7 +1039,54 @@ static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
 	return rv;
 }
 
+static int write_latency_timer(struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	struct usb_device *udev = port->serial->dev;
+	char buf[1];
+	int rv = 0;
+	int l = priv->latency;
+
+	if (priv->flags & ASYNC_LOW_LATENCY)
+		l = 1;
+
+	dbg("%s: setting latency timer = %i", __func__, l);
+
+	rv = usb_control_msg(udev,
+			     usb_sndctrlpipe(udev, 0),
+			     FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
+			     FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
+			     l, priv->interface,
+			     buf, 0, WDR_TIMEOUT);
+
+	if (rv < 0)
+		dev_err(&port->dev, "Unable to write latency timer: %i\n", rv);
+	return rv;
+}
+
+static int read_latency_timer(struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	struct usb_device *udev = port->serial->dev;
+	unsigned short latency = 0;
+	int rv = 0;
+
 
+	dbg("%s", __func__);
+
+	rv = usb_control_msg(udev,
+			     usb_rcvctrlpipe(udev, 0),
+			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
+			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
+			     0, priv->interface,
+			     (char *) &latency, 1, WDR_TIMEOUT);
+
+	if (rv < 0) {
+		dev_err(&port->dev, "Unable to read latency timer: %i\n", rv);
+		return -EIO;
+	}
+	return latency;
+}
 
 static int get_serial_info(struct usb_serial_port *port,
 				struct serial_struct __user *retinfo)
@@ -1097,6 +1146,7 @@ static int set_serial_info(struct tty_struct *tty,
 	priv->custom_divisor = new_serial.custom_divisor;
 
 	tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	write_latency_timer(port);
 
 check_and_exit:
 	if ((old_priv.flags & ASYNC_SPD_MASK) !=
@@ -1192,27 +1242,13 @@ static ssize_t show_latency_timer(struct device *dev,
 {
 	struct usb_serial_port *port = to_usb_serial_port(dev);
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	struct usb_device *udev = port->serial->dev;
-	unsigned short latency = 0;
-	int rv = 0;
-
-
-	dbg("%s", __func__);
-
-	rv = usb_control_msg(udev,
-			     usb_rcvctrlpipe(udev, 0),
-			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
-			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
-			     0, priv->interface,
-			     (char *) &latency, 1, WDR_TIMEOUT);
-
-	if (rv < 0) {
-		dev_err(dev, "Unable to read latency timer: %i\n", rv);
-		return -EIO;
-	}
-	return sprintf(buf, "%i\n", latency);
+	if (priv->flags & ASYNC_LOW_LATENCY)
+		return sprintf(buf, "1\n");
+	else
+		return sprintf(buf, "%i\n", priv->latency);
 }
 
+
 /* Write a new value of the latency timer, in units of milliseconds. */
 static ssize_t store_latency_timer(struct device *dev,
 			struct device_attribute *attr, const char *valbuf,
@@ -1220,25 +1256,13 @@ static ssize_t store_latency_timer(struct device *dev,
 {
 	struct usb_serial_port *port = to_usb_serial_port(dev);
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	struct usb_device *udev = port->serial->dev;
-	char buf[1];
 	int v = simple_strtoul(valbuf, NULL, 10);
 	int rv = 0;
 
-	dbg("%s: setting latency timer = %i", __func__, v);
-
-	rv = usb_control_msg(udev,
-			     usb_sndctrlpipe(udev, 0),
-			     FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
-			     FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
-			     v, priv->interface,
-			     buf, 0, WDR_TIMEOUT);
-
-	if (rv < 0) {
-		dev_err(dev, "Unable to write latency timer: %i\n", rv);
+	priv->latency = v;
+	rv = write_latency_timer(port);
+	if (rv < 0)
 		return -EIO;
-	}
-
 	return count;
 }
 
@@ -1392,6 +1416,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 	usb_set_serial_port_data(port, priv);
 
 	ftdi_determine_type(port);
+	read_latency_timer(port);
 	create_sysfs_attrs(port);
 	return 0;
 }
@@ -1514,6 +1539,8 @@ static int ftdi_open(struct tty_struct *tty,
 	if (tty)
 		tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
+	write_latency_timer(port);
+
 	/* No error checking for this (will get errors later anyway) */
 	/* See ftdi_sio.h for description of what is reset */
 	usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
@@ -1529,11 +1556,6 @@ static int ftdi_open(struct tty_struct *tty,
 	if (tty)
 		ftdi_set_termios(tty, port, tty->termios);
 
-	/* FIXME: Flow control might be enabled, so it should be checked -
-	   we have no control of defaults! */
-	/* Turn on RTS and DTR since we are not flow controlling by default */
-	set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
-
 	/* Not throttled */
 	spin_lock_irqsave(&priv->rx_lock, flags);
 	priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
@@ -1558,6 +1580,30 @@ static int ftdi_open(struct tty_struct *tty,
 } /* ftdi_open */
 
 
+static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	char buf[1];
+
+	mutex_lock(&port->serial->disc_mutex);
+	if (!port->serial->disconnected) {
+		/* Disable flow control */
+		if (!on && usb_control_msg(port->serial->dev,
+			    usb_sndctrlpipe(port->serial->dev, 0),
+			    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
+			    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
+			    0, priv->interface, buf, 0,
+			    WDR_TIMEOUT) < 0) {
+			    dev_err(&port->dev, "error from flowcontrol urb\n");
+		}
+		/* drop RTS and DTR */
+		if (on)
+			set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+		else
+			clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+	}
+	mutex_unlock(&port->serial->disc_mutex);
+}
 
 /*
  * usbserial:__serial_close  only calls ftdi_close if the point is open
@@ -1567,31 +1613,12 @@ static int ftdi_open(struct tty_struct *tty,
  *
  */
 
-static void ftdi_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void ftdi_close(struct usb_serial_port *port)
 { /* ftdi_close */
-	unsigned int c_cflag = tty->termios->c_cflag;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	char buf[1];
 
 	dbg("%s", __func__);
 
-	mutex_lock(&port->serial->disc_mutex);
-	if (c_cflag & HUPCL && !port->serial->disconnected) {
-		/* Disable flow control */
-		if (usb_control_msg(port->serial->dev,
-				    usb_sndctrlpipe(port->serial->dev, 0),
-				    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
-				    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
-				    0, priv->interface, buf, 0,
-				    WDR_TIMEOUT) < 0) {
-			dev_err(&port->dev, "error from flowcontrol urb\n");
-		}
-
-		/* drop RTS and DTR */
-		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
-	} /* Note change no line if hupcl is off */
-	mutex_unlock(&port->serial->disc_mutex);
 
 	/* cancel any scheduled reading */
 	cancel_delayed_work_sync(&priv->rx_work);

drivers/usb/serial/garmin_gps.c

@@ -993,8 +993,7 @@ static int garmin_open(struct tty_struct *tty,
 }
 
 
-static void garmin_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void garmin_close(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);

drivers/usb/serial/generic.c

@@ -184,8 +184,7 @@ int usb_serial_generic_resume(struct usb_serial *serial)
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_resume);
 
-void usb_serial_generic_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+void usb_serial_generic_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 	generic_cleanup(port);

drivers/usb/serial/io_edgeport.c

@@ -207,8 +207,7 @@ static void edge_bulk_out_cmd_callback(struct urb *urb);
 /* function prototypes for the usbserial callbacks */
 static int edge_open(struct tty_struct *tty, struct usb_serial_port *port,
 					struct file *filp);
-static void edge_close(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filp);
+static void edge_close(struct usb_serial_port *port);
 static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count);
 static int edge_write_room(struct tty_struct *tty);
@@ -965,7 +964,7 @@ static int edge_open(struct tty_struct *tty,
 
 	if (!edge_port->txfifo.fifo) {
 		dbg("%s - no memory", __func__);
-		edge_close(tty, port, filp);
+		edge_close(port);
 		return -ENOMEM;
 	}
 
@@ -975,7 +974,7 @@ static int edge_open(struct tty_struct *tty,
 
 	if (!edge_port->write_urb) {
 		dbg("%s - no memory", __func__);
-		edge_close(tty, port, filp);
+		edge_close(port);
 		return -ENOMEM;
 	}
 
@@ -1099,8 +1098,7 @@ static void block_until_tx_empty(struct edgeport_port *edge_port)
  * edge_close
  *	this function is called by the tty driver when a port is closed
  *****************************************************************************/
-static void edge_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void edge_close(struct usb_serial_port *port)
 {
 	struct edgeport_serial *edge_serial;
 	struct edgeport_port *edge_port;

drivers/usb/serial/io_ti.c

@@ -2009,8 +2009,7 @@ release_es_lock:
 	return status;
 }
 
-static void edge_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void edge_close(struct usb_serial_port *port)
 {
 	struct edgeport_serial *edge_serial;
 	struct edgeport_port *edge_port;

drivers/usb/serial/ipaq.c

@@ -76,8 +76,7 @@ static int initial_wait;
 /* Function prototypes for an ipaq */
 static int  ipaq_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void ipaq_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void ipaq_close(struct usb_serial_port *port);
 static int  ipaq_calc_num_ports(struct usb_serial *serial);
 static int  ipaq_startup(struct usb_serial *serial);
 static void ipaq_shutdown(struct usb_serial *serial);
@@ -714,8 +713,7 @@ error:
 }
 
 
-static void ipaq_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void ipaq_close(struct usb_serial_port *port)
 {
 	struct ipaq_private	*priv = usb_get_serial_port_data(port);
 

drivers/usb/serial/ipw.c

@@ -302,23 +302,17 @@ static int ipw_open(struct tty_struct *tty,
 	return 0;
 }
 
-static void ipw_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void ipw_dtr_rts(struct usb_serial_port *port, int on)
 {
 	struct usb_device *dev = port->serial->dev;
 	int result;
 
-	if (tty_hung_up_p(filp)) {
-		dbg("%s: tty_hung_up_p ...", __func__);
-		return;
-	}
-
 	/*--1: drop the dtr */
 	dbg("%s:dropping dtr", __func__);
 	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 			 IPW_SIO_SET_PIN,
 			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
-			 IPW_PIN_CLRDTR,
+			 on ? IPW_PIN_SETDTR : IPW_PIN_CLRDTR,
 			 0,
 			 NULL,
 			 0,
@@ -332,7 +326,7 @@ static void ipw_close(struct tty_struct *tty,
 	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 			 IPW_SIO_SET_PIN, USB_TYPE_VENDOR |
 			 		USB_RECIP_INTERFACE | USB_DIR_OUT,
-			 IPW_PIN_CLRRTS,
+			 on ? IPW_PIN_SETRTS : IPW_PIN_CLRRTS,
 			 0,
 			 NULL,
 			 0,
@@ -340,7 +334,12 @@ static void ipw_close(struct tty_struct *tty,
 	if (result < 0)
 		dev_err(&port->dev,
 				"dropping rts failed (error = %d)\n", result);
+}
 
+static void ipw_close(struct usb_serial_port *port)
+{
+	struct usb_device *dev = port->serial->dev;
+	int result;
 
 	/*--3: purge */
 	dbg("%s:sending purge", __func__);
@@ -461,6 +460,7 @@ static struct usb_serial_driver ipw_device = {
 	.num_ports =		1,
 	.open =			ipw_open,
 	.close =		ipw_close,
+	.dtr_rts =		ipw_dtr_rts,
 	.port_probe = 		ipw_probe,
 	.port_remove =		ipw_disconnect,
 	.write =		ipw_write,

drivers/usb/serial/ir-usb.c

@@ -88,8 +88,7 @@ static int xbof = -1;
 static int  ir_startup (struct usb_serial *serial);
 static int  ir_open(struct tty_struct *tty, struct usb_serial_port *port,
 					struct file *filep);
-static void ir_close(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filep);
+static void ir_close(struct usb_serial_port *port);
 static int  ir_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count);
 static void ir_write_bulk_callback (struct urb *urb);
@@ -346,8 +345,7 @@ static int ir_open(struct tty_struct *tty,
 	return result;
 }
 
-static void ir_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file * filp)
+static void ir_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 

drivers/usb/serial/iuu_phoenix.c

@@ -40,7 +40,7 @@ static int debug;
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v0.5"
+#define DRIVER_VERSION "v0.10"
 #define DRIVER_DESC "Infinity USB Unlimited Phoenix driver"
 
 static struct usb_device_id id_table[] = {
@@ -70,7 +70,6 @@ static void read_rxcmd_callback(struct urb *urb);
 struct iuu_private {
 	spinlock_t lock;	/* store irq state */
 	wait_queue_head_t delta_msr_wait;
-	u8 line_control;
 	u8 line_status;
 	u8 termios_initialized;
 	int tiostatus;		/* store IUART SIGNAL for tiocmget call */
@@ -651,32 +650,33 @@ static int iuu_bulk_write(struct usb_serial_port *port)
 	unsigned long flags;
 	int result;
 	int i;
+	int buf_len;
 	char *buf_ptr = port->write_urb->transfer_buffer;
 	dbg("%s - enter", __func__);
 
+	spin_lock_irqsave(&priv->lock, flags);
 	*buf_ptr++ = IUU_UART_ESC;
 	*buf_ptr++ = IUU_UART_TX;
 	*buf_ptr++ = priv->writelen;
 
-	memcpy(buf_ptr, priv->writebuf,
-	       priv->writelen);
+	memcpy(buf_ptr, priv->writebuf, priv->writelen);
+	buf_len = priv->writelen;
+	priv->writelen = 0;
+	spin_unlock_irqrestore(&priv->lock, flags);
 	if (debug == 1) {
-		for (i = 0; i < priv->writelen; i++)
+		for (i = 0; i < buf_len; i++)
 			sprintf(priv->dbgbuf + i*2 ,
 				"%02X", priv->writebuf[i]);
-		priv->dbgbuf[priv->writelen+i*2] = 0;
+		priv->dbgbuf[buf_len+i*2] = 0;
 		dbg("%s - writing %i chars : %s", __func__,
-		    priv->writelen, priv->dbgbuf);
+		    buf_len, priv->dbgbuf);
 	}
 	usb_fill_bulk_urb(port->write_urb, port->serial->dev,
 			  usb_sndbulkpipe(port->serial->dev,
 					  port->bulk_out_endpointAddress),
-			  port->write_urb->transfer_buffer, priv->writelen + 3,
+			  port->write_urb->transfer_buffer, buf_len + 3,
 			  iuu_rxcmd, port);
 	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->writelen = 0;
-	spin_unlock_irqrestore(&priv->lock, flags);
 	usb_serial_port_softint(port);
 	return result;
 }
@@ -770,14 +770,10 @@ static int iuu_uart_write(struct tty_struct *tty, struct usb_serial_port *port,
 		return -ENOMEM;
 
 	spin_lock_irqsave(&priv->lock, flags);
-	if (priv->writelen > 0) {
-		/* buffer already filled but not commited */
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return 0;
-	}
+
 	/* fill the buffer */
-	memcpy(priv->writebuf, buf, count);
-	priv->writelen = count;
+	memcpy(priv->writebuf + priv->writelen, buf, count);
+	priv->writelen += count;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	return count;
@@ -819,7 +815,7 @@ static int iuu_uart_on(struct usb_serial_port *port)
 	buf[0] = IUU_UART_ENABLE;
 	buf[1] = (u8) ((IUU_BAUD_9600 >> 8) & 0x00FF);
 	buf[2] = (u8) (0x00FF & IUU_BAUD_9600);
-	buf[3] = (u8) (0x0F0 & IUU_TWO_STOP_BITS) | (0x07 & IUU_PARITY_EVEN);
+	buf[3] = (u8) (0x0F0 & IUU_ONE_STOP_BIT) | (0x07 & IUU_PARITY_EVEN);
 
 	status = bulk_immediate(port, buf, 4);
 	if (status != IUU_OPERATION_OK) {
@@ -946,19 +942,59 @@ static int iuu_uart_baud(struct usb_serial_port *port, u32 baud,
 	return status;
 }
 
-static int set_control_lines(struct usb_device *dev, u8 value)
+static void iuu_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
-	return 0;
+	const u32 supported_mask = CMSPAR|PARENB|PARODD;
+
+	unsigned int cflag = tty->termios->c_cflag;
+	int status;
+	u32 actual;
+	u32 parity;
+	int csize = CS7;
+	int baud = 9600;	/* Fixed for the moment */
+	u32 newval = cflag & supported_mask;
+
+	/* compute the parity parameter */
+	parity = 0;
+	if (cflag & CMSPAR) {	/* Using mark space */
+		if (cflag & PARODD)
+			parity |= IUU_PARITY_SPACE;
+		else
+			parity |= IUU_PARITY_MARK;
+	} else if (!(cflag & PARENB)) {
+		parity |= IUU_PARITY_NONE;
+		csize = CS8;
+	} else if (cflag & PARODD)
+		parity |= IUU_PARITY_ODD;
+	else
+		parity |= IUU_PARITY_EVEN;
+
+	parity |= (cflag & CSTOPB ? IUU_TWO_STOP_BITS : IUU_ONE_STOP_BIT);
+
+	/* set it */
+	status = iuu_uart_baud(port,
+			(clockmode == 2) ? 16457 : 9600 * boost / 100,
+			&actual, parity);
+
+	/* set the termios value to the real one, so the user now what has
+	 * changed. We support few fields so its easies to copy the old hw
+	 * settings back over and then adjust them
+	 */
+ 	if (old_termios)
+ 		tty_termios_copy_hw(tty->termios, old_termios);
+	if (status != 0)	/* Set failed - return old bits */
+		return;
+	/* Re-encode speed, parity and csize */
+	tty_encode_baud_rate(tty, baud, baud);
+	tty->termios->c_cflag &= ~(supported_mask|CSIZE);
+	tty->termios->c_cflag |= newval | csize;
 }
 
-static void iuu_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void iuu_close(struct usb_serial_port *port)
 {
 	/* iuu_led (port,255,0,0,0); */
 	struct usb_serial *serial;
-	struct iuu_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-	unsigned int c_cflag;
 
 	serial = port->serial;
 	if (!serial)
@@ -968,17 +1004,6 @@ static void iuu_close(struct tty_struct *tty,
 
 	iuu_uart_off(port);
 	if (serial->dev) {
-		if (tty) {
-			c_cflag = tty->termios->c_cflag;
-			if (c_cflag & HUPCL) {
-				/* drop DTR and RTS */
-				priv = usb_get_serial_port_data(port);
-				spin_lock_irqsave(&priv->lock, flags);
-				priv->line_control = 0;
-				spin_unlock_irqrestore(&priv->lock, flags);
-				set_control_lines(port->serial->dev, 0);
-			}
-		}
 		/* free writebuf */
 		/* shutdown our urbs */
 		dbg("%s - shutting down urbs", __func__);
@@ -1154,7 +1179,7 @@ static int iuu_open(struct tty_struct *tty,
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting read urb,"
 			" error %d\n", __func__, result);
-		iuu_close(tty, port, NULL);
+		iuu_close(port);
 		return -EPROTO;
 	} else {
 		dbg("%s - rxcmd OK", __func__);
@@ -1175,6 +1200,7 @@ static struct usb_serial_driver iuu_device = {
 	.read_bulk_callback = iuu_uart_read_callback,
 	.tiocmget = iuu_tiocmget,
 	.tiocmset = iuu_tiocmset,
+	.set_termios = iuu_set_termios,
 	.attach = iuu_startup,
 	.shutdown = iuu_shutdown,
 };

drivers/usb/serial/keyspan.c

@@ -1298,8 +1298,16 @@ static inline void stop_urb(struct urb *urb)
 		usb_kill_urb(urb);
 }
 
-static void keyspan_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void keyspan_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
+
+	p_priv->rts_state = on;
+	p_priv->dtr_state = on;
+	keyspan_send_setup(port, 0);
+}
+
+static void keyspan_close(struct usb_serial_port *port)
 {
 	int			i;
 	struct usb_serial	*serial = port->serial;
@@ -1336,7 +1344,6 @@ static void keyspan_close(struct tty_struct *tty,
 			stop_urb(p_priv->out_urbs[i]);
 		}
 	}
-	tty_port_tty_set(&port->port, NULL);
 }
 
 /* download the firmware to a pre-renumeration device */

drivers/usb/serial/keyspan.h

@@ -38,9 +38,8 @@
 static int  keyspan_open		(struct tty_struct *tty,
 					 struct usb_serial_port *port,
 					 struct file *filp);
-static void keyspan_close		(struct tty_struct *tty,
-					 struct usb_serial_port *port,
-					 struct file *filp);
+static void keyspan_close		(struct usb_serial_port *port);
+static void keyspan_dtr_rts		(struct usb_serial_port *port, int on);
 static int  keyspan_startup		(struct usb_serial *serial);
 static void keyspan_shutdown		(struct usb_serial *serial);
 static int  keyspan_write_room		(struct tty_struct *tty);
@@ -562,6 +561,7 @@ static struct usb_serial_driver keyspan_1port_device = {
 	.num_ports		= 1,
 	.open			= keyspan_open,
 	.close			= keyspan_close,
+	.dtr_rts		= keyspan_dtr_rts,
 	.write			= keyspan_write,
 	.write_room		= keyspan_write_room,
 	.set_termios		= keyspan_set_termios,
@@ -582,6 +582,7 @@ static struct usb_serial_driver keyspan_2port_device = {
 	.num_ports		= 2,
 	.open			= keyspan_open,
 	.close			= keyspan_close,
+	.dtr_rts		= keyspan_dtr_rts,
 	.write			= keyspan_write,
 	.write_room		= keyspan_write_room,
 	.set_termios		= keyspan_set_termios,
@@ -602,6 +603,7 @@ static struct usb_serial_driver keyspan_4port_device = {
 	.num_ports		= 4,
 	.open			= keyspan_open,
 	.close			= keyspan_close,
+	.dtr_rts		= keyspan_dtr_rts,
 	.write			= keyspan_write,
 	.write_room		= keyspan_write_room,
 	.set_termios		= keyspan_set_termios,

drivers/usb/serial/keyspan_pda.c

@@ -651,6 +651,35 @@ static int keyspan_pda_chars_in_buffer(struct tty_struct *tty)
 }
 
 
+static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct usb_serial *serial = port->serial;
+
+	if (serial->dev) {
+		if (on)
+			keyspan_pda_set_modem_info(serial, (1<<7) | (1<< 2));
+		else
+			keyspan_pda_set_modem_info(serial, 0);
+	}
+}
+
+static int keyspan_pda_carrier_raised(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	unsigned char modembits;
+
+	/* If we can read the modem status and the DCD is low then
+	   carrier is not raised yet */
+	if (keyspan_pda_get_modem_info(serial, &modembits) >= 0) {
+		if (!(modembits & (1>>6)))
+			return 0;
+	}
+	/* Carrier raised, or we failed (eg disconnected) so
+	   progress accordingly */
+	return 1;
+}
+
+
 static int keyspan_pda_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp)
 {
@@ -682,13 +711,6 @@ static int keyspan_pda_open(struct tty_struct *tty,
 	priv->tx_room = room;
 	priv->tx_throttled = room ? 0 : 1;
 
-	/* the normal serial device seems to always turn on DTR and RTS here,
-	   so do the same */
-	if (tty && (tty->termios->c_cflag & CBAUD))
-		keyspan_pda_set_modem_info(serial, (1<<7) | (1<<2));
-	else
-		keyspan_pda_set_modem_info(serial, 0);
-
 	/*Start reading from the device*/
 	port->interrupt_in_urb->dev = serial->dev;
 	rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
@@ -700,19 +722,11 @@ static int keyspan_pda_open(struct tty_struct *tty,
 error:
 	return rc;
 }
-
-
-static void keyspan_pda_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void keyspan_pda_close(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 
 	if (serial->dev) {
-		/* the normal serial device seems to always shut
-		   off DTR and RTS now */
-		if (tty->termios->c_cflag & HUPCL)
-			keyspan_pda_set_modem_info(serial, 0);
-
 		/* shutdown our bulk reads and writes */
 		usb_kill_urb(port->write_urb);
 		usb_kill_urb(port->interrupt_in_urb);
@@ -839,6 +853,8 @@ static struct usb_serial_driver keyspan_pda_device = {
 	.usb_driver = 		&keyspan_pda_driver,
 	.id_table =		id_table_std,
 	.num_ports =		1,
+	.dtr_rts =		keyspan_pda_dtr_rts,
+	.carrier_raised	=	keyspan_pda_carrier_raised,
 	.open =			keyspan_pda_open,
 	.close =		keyspan_pda_close,
 	.write =		keyspan_pda_write,

drivers/usb/serial/kl5kusb105.c

@@ -76,8 +76,7 @@ static int  klsi_105_startup(struct usb_serial *serial);
 static void klsi_105_shutdown(struct usb_serial *serial);
 static int  klsi_105_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void klsi_105_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void klsi_105_close(struct usb_serial_port *port);
 static int  klsi_105_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count);
 static void klsi_105_write_bulk_callback(struct urb *urb);
@@ -447,8 +446,7 @@ exit:
 } /* klsi_105_open */
 
 
-static void klsi_105_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void klsi_105_close(struct usb_serial_port *port)
 {
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
 	int rc;

drivers/usb/serial/kobil_sct.c

@@ -72,8 +72,7 @@ static int  kobil_startup(struct usb_serial *serial);
 static void kobil_shutdown(struct usb_serial *serial);
 static int  kobil_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void kobil_close(struct tty_struct *tty, struct usb_serial_port *port,
-			struct file *filp);
+static void kobil_close(struct usb_serial_port *port);
 static int  kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
 			 const unsigned char *buf, int count);
 static int  kobil_write_room(struct tty_struct *tty);
@@ -209,7 +208,7 @@ static void kobil_shutdown(struct usb_serial *serial)
 
 	for (i = 0; i < serial->num_ports; ++i) {
 		while (serial->port[i]->port.count > 0)
-			kobil_close(NULL, serial->port[i], NULL);
+			kobil_close(serial->port[i]);
 		kfree(usb_get_serial_port_data(serial->port[i]));
 		usb_set_serial_port_data(serial->port[i], NULL);
 	}
@@ -346,11 +345,11 @@ static int kobil_open(struct tty_struct *tty,
 }
 
 
-static void kobil_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void kobil_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 
+	/* FIXME: Add rts/dtr methods */
 	if (port->write_urb) {
 		usb_kill_urb(port->write_urb);
 		usb_free_urb(port->write_urb);

drivers/usb/serial/mct_u232.c

@@ -95,8 +95,8 @@ static int  mct_u232_startup(struct usb_serial *serial);
 static void mct_u232_shutdown(struct usb_serial *serial);
 static int  mct_u232_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void mct_u232_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void mct_u232_close(struct usb_serial_port *port);
+static void mct_u232_dtr_rts(struct usb_serial_port *port, int on);
 static void mct_u232_read_int_callback(struct urb *urb);
 static void mct_u232_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
@@ -140,6 +140,7 @@ static struct usb_serial_driver mct_u232_device = {
 	.num_ports =	     1,
 	.open =		     mct_u232_open,
 	.close =	     mct_u232_close,
+	.dtr_rts =	     mct_u232_dtr_rts,
 	.throttle =	     mct_u232_throttle,
 	.unthrottle =	     mct_u232_unthrottle,
 	.read_int_callback = mct_u232_read_int_callback,
@@ -496,29 +497,29 @@ error:
 	return retval;
 } /* mct_u232_open */
 
-
-static void mct_u232_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void mct_u232_dtr_rts(struct usb_serial_port *port, int on)
 {
-	unsigned int c_cflag;
 	unsigned int control_state;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
-	dbg("%s port %d", __func__, port->number);
 
-	if (tty) {
-		c_cflag = tty->termios->c_cflag;
-		mutex_lock(&port->serial->disc_mutex);
-		if (c_cflag & HUPCL && !port->serial->disconnected) {
-			/* drop DTR and RTS */
-			spin_lock_irq(&priv->lock);
+	mutex_lock(&port->serial->disc_mutex);
+	if (!port->serial->disconnected) {
+		/* drop DTR and RTS */
+		spin_lock_irq(&priv->lock);
+		if (on)
+			priv->control_state |= TIOCM_DTR | TIOCM_RTS;
+		else
 			priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
-			control_state = priv->control_state;
-			spin_unlock_irq(&priv->lock);
-			mct_u232_set_modem_ctrl(port->serial, control_state);
-		}
-		mutex_unlock(&port->serial->disc_mutex);
+		control_state = priv->control_state;
+		spin_unlock_irq(&priv->lock);
+		mct_u232_set_modem_ctrl(port->serial, control_state);
 	}
+	mutex_unlock(&port->serial->disc_mutex);
+}
 
+static void mct_u232_close(struct usb_serial_port *port)
+{
+	dbg("%s port %d", __func__, port->number);
 
 	if (port->serial->dev) {
 		/* shutdown our urbs */

drivers/usb/serial/mos7720.c

@@ -533,8 +533,7 @@ static int mos7720_chars_in_buffer(struct tty_struct *tty)
 	return chars;
 }
 
-static void mos7720_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void mos7720_close(struct usb_serial_port *port)
 {
 	struct usb_serial *serial;
 	struct moschip_port *mos7720_port;

drivers/usb/serial/mos7840.c

@@ -1135,54 +1135,12 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty)
 
 }
 
-/************************************************************************
- *
- * mos7840_block_until_tx_empty
- *
- *	This function will block the close until one of the following:
- *		1. TX count are 0
- *		2. The mos7840 has stopped
- *		3. A timeout of 3 seconds without activity has expired
- *
- ************************************************************************/
-static void mos7840_block_until_tx_empty(struct tty_struct *tty,
-				struct moschip_port *mos7840_port)
-{
-	int timeout = HZ / 10;
-	int wait = 30;
-	int count;
-
-	while (1) {
-
-		count = mos7840_chars_in_buffer(tty);
-
-		/* Check for Buffer status */
-		if (count <= 0)
-			return;
-
-		/* Block the thread for a while */
-		interruptible_sleep_on_timeout(&mos7840_port->wait_chase,
-					       timeout);
-
-		/* No activity.. count down section */
-		wait--;
-		if (wait == 0) {
-			dbg("%s - TIMEOUT", __func__);
-			return;
-		} else {
-			/* Reset timeout value back to seconds */
-			wait = 30;
-		}
-	}
-}
-
 /*****************************************************************************
  * mos7840_close
  *	this function is called by the tty driver when a port is closed
  *****************************************************************************/
 
-static void mos7840_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void mos7840_close(struct usb_serial_port *port)
 {
 	struct usb_serial *serial;
 	struct moschip_port *mos7840_port;
@@ -1223,10 +1181,6 @@ static void mos7840_close(struct tty_struct *tty,
 		}
 	}
 
-	if (serial->dev)
-		/* flush and block until tx is empty */
-		mos7840_block_until_tx_empty(tty, mos7840_port);
-
 	/* While closing port, shutdown all bulk read, write  *
 	 * and interrupt read if they exists                  */
 	if (serial->dev) {

drivers/usb/serial/navman.c

@@ -98,8 +98,7 @@ static int navman_open(struct tty_struct *tty,
 	return result;
 }
 
-static void navman_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void navman_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 

drivers/usb/serial/omninet.c

@@ -66,8 +66,7 @@ static int debug;
 /* function prototypes */
 static int  omninet_open(struct tty_struct *tty, struct usb_serial_port *port,
 							struct file *filp);
-static void omninet_close(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *filp);
+static void omninet_close(struct usb_serial_port *port);
 static void omninet_read_bulk_callback(struct urb *urb);
 static void omninet_write_bulk_callback(struct urb *urb);
 static int  omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -189,8 +188,7 @@ static int omninet_open(struct tty_struct *tty,
 	return result;
 }
 
-static void omninet_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void omninet_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 	usb_kill_urb(port->read_urb);

drivers/usb/serial/opticon.c

@@ -173,8 +173,7 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port,
 	return result;
 }
 
-static void opticon_close(struct tty_struct *tty, struct usb_serial_port *port,
-			  struct file *filp)
+static void opticon_close(struct usb_serial_port *port)
 {
 	struct opticon_private *priv = usb_get_serial_data(port->serial);
 

drivers/usb/serial/option.c

@@ -45,8 +45,9 @@
 /* Function prototypes */
 static int  option_open(struct tty_struct *tty, struct usb_serial_port *port,
 							struct file *filp);
-static void option_close(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *filp);
+static void option_close(struct usb_serial_port *port);
+static void option_dtr_rts(struct usb_serial_port *port, int on);
+
 static int  option_startup(struct usb_serial *serial);
 static void option_shutdown(struct usb_serial *serial);
 static int  option_write_room(struct tty_struct *tty);
@@ -61,7 +62,7 @@ static void option_set_termios(struct tty_struct *tty,
 static int  option_tiocmget(struct tty_struct *tty, struct file *file);
 static int  option_tiocmset(struct tty_struct *tty, struct file *file,
 				unsigned int set, unsigned int clear);
-static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *port);
+static int  option_send_setup(struct usb_serial_port *port);
 static int  option_suspend(struct usb_serial *serial, pm_message_t message);
 static int  option_resume(struct usb_serial *serial);
 
@@ -551,6 +552,7 @@ static struct usb_serial_driver option_1port_device = {
 	.num_ports         = 1,
 	.open              = option_open,
 	.close             = option_close,
+	.dtr_rts	   = option_dtr_rts,
 	.write             = option_write,
 	.write_room        = option_write_room,
 	.chars_in_buffer   = option_chars_in_buffer,
@@ -630,7 +632,7 @@ static void option_set_termios(struct tty_struct *tty,
 	dbg("%s", __func__);
 	/* Doesn't support option setting */
 	tty_termios_copy_hw(tty->termios, old_termios);
-	option_send_setup(tty, port);
+	option_send_setup(port);
 }
 
 static int option_tiocmget(struct tty_struct *tty, struct file *file)
@@ -669,7 +671,7 @@ static int option_tiocmset(struct tty_struct *tty, struct file *file,
 		portdata->rts_state = 0;
 	if (clear & TIOCM_DTR)
 		portdata->dtr_state = 0;
-	return option_send_setup(tty, port);
+	return option_send_setup(port);
 }
 
 /* Write */
@@ -897,10 +899,6 @@ static int option_open(struct tty_struct *tty,
 
 	dbg("%s", __func__);
 
-	/* Set some sane defaults */
-	portdata->rts_state = 1;
-	portdata->dtr_state = 1;
-
 	/* Reset low level data toggle and start reading from endpoints */
 	for (i = 0; i < N_IN_URB; i++) {
 		urb = portdata->in_urbs[i];
@@ -936,37 +934,43 @@ static int option_open(struct tty_struct *tty,
 				usb_pipeout(urb->pipe), 0); */
 	}
 
-	option_send_setup(tty, port);
+	option_send_setup(port);
 
 	return 0;
 }
 
-static void option_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void option_dtr_rts(struct usb_serial_port *port, int on)
 {
-	int i;
 	struct usb_serial *serial = port->serial;
 	struct option_port_private *portdata;
 
 	dbg("%s", __func__);
 	portdata = usb_get_serial_port_data(port);
+	mutex_lock(&serial->disc_mutex);
+	portdata->rts_state = on;
+	portdata->dtr_state = on;
+	if (serial->dev)
+		option_send_setup(port);
+	mutex_unlock(&serial->disc_mutex);
+}
 
-	portdata->rts_state = 0;
-	portdata->dtr_state = 0;
 
-	if (serial->dev) {
-		mutex_lock(&serial->disc_mutex);
-		if (!serial->disconnected)
-			option_send_setup(tty, port);
-		mutex_unlock(&serial->disc_mutex);
+static void option_close(struct usb_serial_port *port)
+{
+	int i;
+	struct usb_serial *serial = port->serial;
+	struct option_port_private *portdata;
+
+	dbg("%s", __func__);
+	portdata = usb_get_serial_port_data(port);
 
+	if (serial->dev) {
 		/* Stop reading/writing urbs */
 		for (i = 0; i < N_IN_URB; i++)
 			usb_kill_urb(portdata->in_urbs[i]);
 		for (i = 0; i < N_OUT_URB; i++)
 			usb_kill_urb(portdata->out_urbs[i]);
 	}
-	tty_port_tty_set(&port->port, NULL);
 }
 
 /* Helper functions used by option_setup_urbs */
@@ -1032,28 +1036,24 @@ static void option_setup_urbs(struct usb_serial *serial)
  * This is exactly the same as SET_CONTROL_LINE_STATE from the PSTN
  * CDC.
 */
-static int option_send_setup(struct tty_struct *tty,
-						struct usb_serial_port *port)
+static int option_send_setup(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct option_port_private *portdata;
 	int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
+	int val = 0;
 	dbg("%s", __func__);
 
 	portdata = usb_get_serial_port_data(port);
 
-	if (tty) {
-		int val = 0;
-		if (portdata->dtr_state)
-			val |= 0x01;
-		if (portdata->rts_state)
-			val |= 0x02;
+	if (portdata->dtr_state)
+		val |= 0x01;
+	if (portdata->rts_state)
+		val |= 0x02;
 
-		return usb_control_msg(serial->dev,
-			usb_rcvctrlpipe(serial->dev, 0),
-			0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT);
-	}
-	return 0;
+	return usb_control_msg(serial->dev,
+		usb_rcvctrlpipe(serial->dev, 0),
+		0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT);
 }
 
 static int option_startup(struct usb_serial *serial)

drivers/usb/serial/oti6858.c

@@ -143,8 +143,7 @@ struct oti6858_control_pkt {
 /* function prototypes */
 static int oti6858_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void oti6858_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void oti6858_close(struct usb_serial_port *port);
 static void oti6858_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
 static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
@@ -622,67 +621,30 @@ static int oti6858_open(struct tty_struct *tty,
 	if (result != 0) {
 		dev_err(&port->dev, "%s(): usb_submit_urb() failed"
 			       " with error %d\n", __func__, result);
-		oti6858_close(tty, port, NULL);
+		oti6858_close(port);
 		return -EPROTO;
 	}
 
 	/* setup termios */
 	if (tty)
 		oti6858_set_termios(tty, port, &tmp_termios);
-
+	port->port.drain_delay = 256;	/* FIXME: check the FIFO length */
 	return 0;
 }
 
-static void oti6858_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void oti6858_close(struct usb_serial_port *port)
 {
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
-	long timeout;
-	wait_queue_t wait;
 
 	dbg("%s(port = %d)", __func__, port->number);
 
-	/* wait for data to drain from the buffer */
 	spin_lock_irqsave(&priv->lock, flags);
-	timeout = 30 * HZ;	/* PL2303_CLOSING_WAIT */
-	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&tty->write_wait, &wait);
-	dbg("%s(): entering wait loop", __func__);
-	for (;;) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (oti6858_buf_data_avail(priv->buf) == 0
-		|| timeout == 0 || signal_pending(current)
-		|| port->serial->disconnected)
-			break;
-		spin_unlock_irqrestore(&priv->lock, flags);
-		timeout = schedule_timeout(timeout);
-		spin_lock_irqsave(&priv->lock, flags);
-	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&tty->write_wait, &wait);
-	dbg("%s(): after wait loop", __func__);
-
 	/* clear out any remaining data in the buffer */
 	oti6858_buf_clear(priv->buf);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/* wait for characters to drain from the device */
-	/* (this is long enough for the entire 256 byte */
-	/* pl2303 hardware buffer to drain with no flow */
-	/* control for data rates of 1200 bps or more, */
-	/* for lower rates we should really know how much */
-	/* data is in the buffer to compute a delay */
-	/* that is not unnecessarily long) */
-	/* FIXME
-	bps = tty_get_baud_rate(tty);
-	if (bps > 1200)
-		timeout = max((HZ*2560)/bps,HZ/10);
-	else
-	*/
-		timeout = 2*HZ;
-	schedule_timeout_interruptible(timeout);
-	dbg("%s(): after schedule_timeout_interruptible()", __func__);
+	dbg("%s(): after buf_clear()", __func__);
 
 	/* cancel scheduled setup */
 	cancel_delayed_work(&priv->delayed_setup_work);
@@ -694,15 +656,6 @@ static void oti6858_close(struct tty_struct *tty,
 	usb_kill_urb(port->write_urb);
 	usb_kill_urb(port->read_urb);
 	usb_kill_urb(port->interrupt_in_urb);
-
-	/*
-	if (tty && (tty->termios->c_cflag) & HUPCL) {
-		// drop DTR and RTS
-		spin_lock_irqsave(&priv->lock, flags);
-		priv->pending_setup.control &= ~CONTROL_MASK;
-		spin_unlock_irqrestore(&priv->lock, flags);
-	}
-	*/
 }
 
 static int oti6858_tiocmset(struct tty_struct *tty, struct file *file,

drivers/usb/serial/pl2303.c

@@ -652,69 +652,41 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	kfree(buf);
 }
 
-static void pl2303_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void pl2303_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct pl2303_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 control;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	/* Change DTR and RTS */
+	if (on)
+		priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+	else
+		priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
+	control = priv->line_control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	set_control_lines(port->serial->dev, control);
+}
+
+static void pl2303_close(struct usb_serial_port *port)
 {
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
-	unsigned int c_cflag;
-	int bps;
-	long timeout;
-	wait_queue_t wait;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/* wait for data to drain from the buffer */
 	spin_lock_irqsave(&priv->lock, flags);
-	timeout = PL2303_CLOSING_WAIT;
-	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&tty->write_wait, &wait);
-	for (;;) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (pl2303_buf_data_avail(priv->buf) == 0 ||
-		    timeout == 0 || signal_pending(current) ||
-		    port->serial->disconnected)
-			break;
-		spin_unlock_irqrestore(&priv->lock, flags);
-		timeout = schedule_timeout(timeout);
-		spin_lock_irqsave(&priv->lock, flags);
-	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&tty->write_wait, &wait);
 	/* clear out any remaining data in the buffer */
 	pl2303_buf_clear(priv->buf);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/* wait for characters to drain from the device */
-	/* (this is long enough for the entire 256 byte */
-	/* pl2303 hardware buffer to drain with no flow */
-	/* control for data rates of 1200 bps or more, */
-	/* for lower rates we should really know how much */
-	/* data is in the buffer to compute a delay */
-	/* that is not unnecessarily long) */
-	bps = tty_get_baud_rate(tty);
-	if (bps > 1200)
-		timeout = max((HZ*2560)/bps, HZ/10);
-	else
-		timeout = 2*HZ;
-	schedule_timeout_interruptible(timeout);
-
 	/* shutdown our urbs */
 	dbg("%s - shutting down urbs", __func__);
 	usb_kill_urb(port->write_urb);
 	usb_kill_urb(port->read_urb);
 	usb_kill_urb(port->interrupt_in_urb);
 
-	if (tty) {
-		c_cflag = tty->termios->c_cflag;
-		if (c_cflag & HUPCL) {
-			/* drop DTR and RTS */
-			spin_lock_irqsave(&priv->lock, flags);
-			priv->line_control = 0;
-			spin_unlock_irqrestore(&priv->lock, flags);
-			set_control_lines(port->serial->dev, 0);
-		}
-	}
 }
 
 static int pl2303_open(struct tty_struct *tty,
@@ -748,7 +720,7 @@ static int pl2303_open(struct tty_struct *tty,
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting read urb,"
 			" error %d\n", __func__, result);
-		pl2303_close(tty, port, NULL);
+		pl2303_close(port);
 		return -EPROTO;
 	}
 
@@ -758,9 +730,10 @@ static int pl2303_open(struct tty_struct *tty,
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
 			" error %d\n", __func__, result);
-		pl2303_close(tty, port, NULL);
+		pl2303_close(port);
 		return -EPROTO;
 	}
+	port->port.drain_delay = 256;
 	return 0;
 }
 
@@ -821,6 +794,14 @@ static int pl2303_tiocmget(struct tty_struct *tty, struct file *file)
 	return result;
 }
 
+static int pl2303_carrier_raised(struct usb_serial_port *port)
+{
+	struct pl2303_private *priv = usb_get_serial_port_data(port);
+	if (priv->line_status & UART_DCD)
+		return 1;
+	return 0;
+}
+
 static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 {
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
@@ -1125,6 +1106,8 @@ static struct usb_serial_driver pl2303_device = {
 	.num_ports =		1,
 	.open =			pl2303_open,
 	.close =		pl2303_close,
+	.dtr_rts = 		pl2303_dtr_rts,
+	.carrier_raised =	pl2303_carrier_raised,
 	.write =		pl2303_write,
 	.ioctl =		pl2303_ioctl,
 	.break_ctl =		pl2303_break_ctl,

drivers/usb/serial/sierra.c

@@ -26,12 +26,10 @@
 #include <linux/module.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
-#include <linux/usb/ch9.h>
 
 #define SWIMS_USB_REQUEST_SetPower	0x00
 #define SWIMS_USB_REQUEST_SetNmea	0x07
 
-/* per port private data */
 #define N_IN_URB	4
 #define N_OUT_URB	4
 #define IN_BUFLEN	4096
@@ -39,6 +37,12 @@
 static int debug;
 static int nmea;
 
+/* Used in interface blacklisting */
+struct sierra_iface_info {
+	const u32 infolen;	/* number of interface numbers on blacklist */
+	const u8  *ifaceinfo;	/* pointer to the array holding the numbers */
+};
+
 static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
 {
 	int result;
@@ -85,6 +89,23 @@ static int sierra_calc_num_ports(struct usb_serial *serial)
 	return result;
 }
 
+static int is_blacklisted(const u8 ifnum,
+				const struct sierra_iface_info *blacklist)
+{
+	const u8  *info;
+	int i;
+
+	if (blacklist) {
+		info = blacklist->ifaceinfo;
+
+		for (i = 0; i < blacklist->infolen; i++) {
+			if (info[i] == ifnum)
+				return 1;
+		}
+	}
+	return 0;
+}
+
 static int sierra_calc_interface(struct usb_serial *serial)
 {
 	int interface;
@@ -153,9 +174,25 @@ static int sierra_probe(struct usb_serial *serial,
 	 */
 	usb_set_serial_data(serial, (void *)num_ports);
 
+	/* ifnum could have changed - by calling usb_set_interface */
+	ifnum = sierra_calc_interface(serial);
+
+	if (is_blacklisted(ifnum,
+				(struct sierra_iface_info *)id->driver_info)) {
+		dev_dbg(&serial->dev->dev,
+			"Ignoring blacklisted interface #%d\n", ifnum);
+		return -ENODEV;
+	}
+
 	return result;
 }
 
+static const u8 direct_ip_non_serial_ifaces[] = { 7, 8, 9, 10, 11 };
+static const struct sierra_iface_info direct_ip_interface_blacklist = {
+	.infolen = ARRAY_SIZE(direct_ip_non_serial_ifaces),
+	.ifaceinfo = direct_ip_non_serial_ifaces,
+};
+
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1199, 0x0017) },	/* Sierra Wireless EM5625 */
 	{ USB_DEVICE(0x1199, 0x0018) },	/* Sierra Wireless MC5720 */
@@ -188,9 +225,11 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1199, 0x6833) },	/* Sierra Wireless MC8781 */
 	{ USB_DEVICE(0x1199, 0x683A) },	/* Sierra Wireless MC8785 */
 	{ USB_DEVICE(0x1199, 0x683B) },	/* Sierra Wireless MC8785 Composite */
-	{ USB_DEVICE(0x1199, 0x683C) },	/* Sierra Wireless MC8790 */
-	{ USB_DEVICE(0x1199, 0x683D) },	/* Sierra Wireless MC8790 */
-	{ USB_DEVICE(0x1199, 0x683E) },	/* Sierra Wireless MC8790 */
+	/* Sierra Wireless MC8790, MC8791, MC8792 Composite */
+	{ USB_DEVICE(0x1199, 0x683C) },
+	{ USB_DEVICE(0x1199, 0x683D) },	/* Sierra Wireless MC8791 Composite */
+	/* Sierra Wireless MC8790, MC8791, MC8792 */
+	{ USB_DEVICE(0x1199, 0x683E) },
 	{ USB_DEVICE(0x1199, 0x6850) },	/* Sierra Wireless AirCard 880 */
 	{ USB_DEVICE(0x1199, 0x6851) },	/* Sierra Wireless AirCard 881 */
 	{ USB_DEVICE(0x1199, 0x6852) },	/* Sierra Wireless AirCard 880 E */
@@ -211,6 +250,10 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
 	{ USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
 
+	{ USB_DEVICE(0x1199, 0x68A3), 	/* Sierra Wireless Direct IP modems */
+	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+	},
+
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, id_table);
@@ -229,7 +272,6 @@ struct sierra_port_private {
 
 	/* Input endpoints and buffers for this port */
 	struct urb *in_urbs[N_IN_URB];
-	char *in_buffer[N_IN_URB];
 
 	/* Settings for the port */
 	int rts_state;	/* Handshaking pins (outputs) */
@@ -240,57 +282,50 @@ struct sierra_port_private {
 	int ri_state;
 };
 
-static int sierra_send_setup(struct tty_struct *tty,
-						struct usb_serial_port *port)
+static int sierra_send_setup(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct sierra_port_private *portdata;
 	__u16 interface = 0;
+	int val = 0;
 
 	dev_dbg(&port->dev, "%s", __func__);
 
 	portdata = usb_get_serial_port_data(port);
 
-	if (tty) {
-		int val = 0;
-		if (portdata->dtr_state)
-			val |= 0x01;
-		if (portdata->rts_state)
-			val |= 0x02;
-
-		/* If composite device then properly report interface */
-		if (serial->num_ports == 1) {
-			interface = sierra_calc_interface(serial);
-
-			/* Control message is sent only to interfaces with
-			 * interrupt_in endpoints
-			 */
-			if (port->interrupt_in_urb) {
-				/* send control message */
-				return usb_control_msg(serial->dev,
-					usb_rcvctrlpipe(serial->dev, 0),
-					0x22, 0x21, val, interface,
-					NULL, 0, USB_CTRL_SET_TIMEOUT);
-			}
-		}
-
-		/* Otherwise the need to do non-composite mapping */
-		else {
-			if (port->bulk_out_endpointAddress == 2)
-				interface = 0;
-			else if (port->bulk_out_endpointAddress == 4)
-				interface = 1;
-			else if (port->bulk_out_endpointAddress == 5)
-				interface = 2;
+	if (portdata->dtr_state)
+		val |= 0x01;
+	if (portdata->rts_state)
+		val |= 0x02;
 
+	/* If composite device then properly report interface */
+	if (serial->num_ports == 1) {
+		interface = sierra_calc_interface(serial);
+		/* Control message is sent only to interfaces with
+		 * interrupt_in endpoints
+		 */
+		if (port->interrupt_in_urb) {
+			/* send control message */
 			return usb_control_msg(serial->dev,
 				usb_rcvctrlpipe(serial->dev, 0),
 				0x22, 0x21, val, interface,
 				NULL, 0, USB_CTRL_SET_TIMEOUT);
-
 		}
 	}
 
+	/* Otherwise the need to do non-composite mapping */
+	else {
+		if (port->bulk_out_endpointAddress == 2)
+			interface = 0;
+		else if (port->bulk_out_endpointAddress == 4)
+			interface = 1;
+		else if (port->bulk_out_endpointAddress == 5)
+			interface = 2;
+		return usb_control_msg(serial->dev,
+			usb_rcvctrlpipe(serial->dev, 0),
+			0x22, 0x21, val, interface,
+			NULL, 0, USB_CTRL_SET_TIMEOUT);
+	}
 	return 0;
 }
 
@@ -299,7 +334,7 @@ static void sierra_set_termios(struct tty_struct *tty,
 {
 	dev_dbg(&port->dev, "%s", __func__);
 	tty_termios_copy_hw(tty->termios, old_termios);
-	sierra_send_setup(tty, port);
+	sierra_send_setup(port);
 }
 
 static int sierra_tiocmget(struct tty_struct *tty, struct file *file)
@@ -338,7 +373,18 @@ static int sierra_tiocmset(struct tty_struct *tty, struct file *file,
 		portdata->rts_state = 0;
 	if (clear & TIOCM_DTR)
 		portdata->dtr_state = 0;
-	return sierra_send_setup(tty, port);
+	return sierra_send_setup(port);
+}
+
+static void sierra_release_urb(struct urb *urb)
+{
+	struct usb_serial_port *port;
+	if (urb) {
+		port =  urb->context;
+		dev_dbg(&port->dev, "%s: %p\n", __func__, urb);
+		kfree(urb->transfer_buffer);
+		usb_free_urb(urb);
+	}
 }
 
 static void sierra_outdat_callback(struct urb *urb)
@@ -465,7 +511,7 @@ static void sierra_indat_callback(struct urb *urb)
 				" received", __func__);
 
 		/* Resubmit urb so we continue receiving */
-		if (port->port.count && status != -ESHUTDOWN) {
+		if (port->port.count && status != -ESHUTDOWN && status != -EPERM) {
 			err = usb_submit_urb(urb, GFP_ATOMIC);
 			if (err)
 				dev_err(&port->dev, "resubmit read urb failed."
@@ -557,67 +603,99 @@ static int sierra_write_room(struct tty_struct *tty)
 	return 2048;
 }
 
-static int sierra_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void sierra_stop_rx_urbs(struct usb_serial_port *port)
 {
-	struct sierra_port_private *portdata;
-	struct usb_serial *serial = port->serial;
 	int i;
-	struct urb *urb;
-	int result;
+	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
 
-	portdata = usb_get_serial_port_data(port);
+	for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++)
+		usb_kill_urb(portdata->in_urbs[i]);
 
-	dev_dbg(&port->dev, "%s", __func__);
+	usb_kill_urb(port->interrupt_in_urb);
+}
 
-	/* Set some sane defaults */
-	portdata->rts_state = 1;
-	portdata->dtr_state = 1;
+static int sierra_submit_rx_urbs(struct usb_serial_port *port, gfp_t mem_flags)
+{
+	int ok_cnt;
+	int err = -EINVAL;
+	int i;
+	struct urb *urb;
+	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
 
-	/* Reset low level data toggle and start reading from endpoints */
-	for (i = 0; i < N_IN_URB; i++) {
+	ok_cnt = 0;
+	for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) {
 		urb = portdata->in_urbs[i];
 		if (!urb)
 			continue;
-		if (urb->dev != serial->dev) {
-			dev_dbg(&port->dev, "%s: dev %p != %p",
-				 __func__, urb->dev, serial->dev);
-			continue;
+		err = usb_submit_urb(urb, mem_flags);
+		if (err) {
+			dev_err(&port->dev, "%s: submit urb failed: %d\n",
+				__func__, err);
+		} else {
+			ok_cnt++;
 		}
+	}
 
-		/*
-		 * make sure endpoint data toggle is synchronized with the
-		 * device
-		 */
-		usb_clear_halt(urb->dev, urb->pipe);
-
-		result = usb_submit_urb(urb, GFP_KERNEL);
-		if (result) {
-			dev_err(&port->dev, "submit urb %d failed (%d) %d\n",
-				i, result, urb->transfer_buffer_length);
+	if (ok_cnt && port->interrupt_in_urb) {
+		err = usb_submit_urb(port->interrupt_in_urb, mem_flags);
+		if (err) {
+			dev_err(&port->dev, "%s: submit intr urb failed: %d\n",
+				__func__, err);
 		}
 	}
 
-	sierra_send_setup(tty, port);
+	if (ok_cnt > 0) /* at least one rx urb submitted */
+		return 0;
+	else
+		return err;
+}
+
+static struct urb *sierra_setup_urb(struct usb_serial *serial, int endpoint,
+					int dir, void *ctx, int len,
+					gfp_t mem_flags,
+					usb_complete_t callback)
+{
+	struct urb	*urb;
+	u8		*buf;
+
+	if (endpoint == -1)
+		return NULL;
 
-	/* start up the interrupt endpoint if we have one */
-	if (port->interrupt_in_urb) {
-		result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
-		if (result)
-			dev_err(&port->dev, "submit irq_in urb failed %d\n",
-				result);
+	urb = usb_alloc_urb(0, mem_flags);
+	if (urb == NULL) {
+		dev_dbg(&serial->dev->dev, "%s: alloc for endpoint %d failed\n",
+			__func__, endpoint);
+		return NULL;
 	}
-	return 0;
+
+	buf = kmalloc(len, mem_flags);
+	if (buf) {
+		/* Fill URB using supplied data */
+		usb_fill_bulk_urb(urb, serial->dev,
+			usb_sndbulkpipe(serial->dev, endpoint) | dir,
+			buf, len, callback, ctx);
+
+		/* debug */
+		dev_dbg(&serial->dev->dev, "%s %c u : %p d:%p\n", __func__,
+				dir == USB_DIR_IN ? 'i' : 'o', urb, buf);
+	} else {
+		dev_dbg(&serial->dev->dev, "%s %c u:%p d:%p\n", __func__,
+				dir == USB_DIR_IN ? 'i' : 'o', urb, buf);
+
+		sierra_release_urb(urb);
+		urb = NULL;
+	}
+
+	return urb;
 }
 
-static void sierra_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void sierra_close(struct usb_serial_port *port)
 {
 	int i;
 	struct usb_serial *serial = port->serial;
 	struct sierra_port_private *portdata;
 
-	dev_dbg(&port->dev, "%s", __func__);
+	dev_dbg(&port->dev, "%s\n", __func__);
 	portdata = usb_get_serial_port_data(port);
 
 	portdata->rts_state = 0;
@@ -626,25 +704,83 @@ static void sierra_close(struct tty_struct *tty,
 	if (serial->dev) {
 		mutex_lock(&serial->disc_mutex);
 		if (!serial->disconnected)
-			sierra_send_setup(tty, port);
+			sierra_send_setup(port);
 		mutex_unlock(&serial->disc_mutex);
 
-		/* Stop reading/writing urbs */
-		for (i = 0; i < N_IN_URB; i++)
-			usb_kill_urb(portdata->in_urbs[i]);
+		/* Stop reading urbs */
+		sierra_stop_rx_urbs(port);
+		/* .. and release them */
+		for (i = 0; i < N_IN_URB; i++) {
+			sierra_release_urb(portdata->in_urbs[i]);
+			portdata->in_urbs[i] = NULL;
+		}
 	}
+}
 
-	usb_kill_urb(port->interrupt_in_urb);
-	tty_port_tty_set(&port->port, NULL);
+static int sierra_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
+{
+	struct sierra_port_private *portdata;
+	struct usb_serial *serial = port->serial;
+	int i;
+	int err;
+	int endpoint;
+	struct urb *urb;
+
+	portdata = usb_get_serial_port_data(port);
+
+	dev_dbg(&port->dev, "%s", __func__);
+
+	/* Set some sane defaults */
+	portdata->rts_state = 1;
+	portdata->dtr_state = 1;
+
+
+	endpoint = port->bulk_in_endpointAddress;
+	for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) {
+		urb = sierra_setup_urb(serial, endpoint, USB_DIR_IN, port,
+					IN_BUFLEN, GFP_KERNEL,
+					sierra_indat_callback);
+		portdata->in_urbs[i] = urb;
+	}
+	/* clear halt condition */
+	usb_clear_halt(serial->dev,
+			usb_sndbulkpipe(serial->dev, endpoint) | USB_DIR_IN);
+
+	err = sierra_submit_rx_urbs(port, GFP_KERNEL);
+	if (err) {
+		/* get rid of everything as in close */
+		sierra_close(port);
+		return err;
+	}
+	sierra_send_setup(port);
+
+	return 0;
+}
+
+
+static void sierra_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct usb_serial *serial = port->serial;
+	struct sierra_port_private *portdata;
+
+	portdata = usb_get_serial_port_data(port);
+	portdata->rts_state = on;
+	portdata->dtr_state = on;
+
+	if (serial->dev) {
+		mutex_lock(&serial->disc_mutex);
+		if (!serial->disconnected)
+			sierra_send_setup(port);
+		mutex_unlock(&serial->disc_mutex);
+	}
 }
 
 static int sierra_startup(struct usb_serial *serial)
 {
 	struct usb_serial_port *port;
 	struct sierra_port_private *portdata;
-	struct urb *urb;
 	int i;
-	int j;
 
 	dev_dbg(&serial->dev->dev, "%s", __func__);
 
@@ -666,34 +802,8 @@ static int sierra_startup(struct usb_serial *serial)
 			return -ENOMEM;
 		}
 		spin_lock_init(&portdata->lock);
-		for (j = 0; j < N_IN_URB; j++) {
-			portdata->in_buffer[j] = kmalloc(IN_BUFLEN, GFP_KERNEL);
-			if (!portdata->in_buffer[j]) {
-				for (--j; j >= 0; j--)
-					kfree(portdata->in_buffer[j]);
-				kfree(portdata);
-				return -ENOMEM;
-			}
-		}
-
+		/* Set the port private data pointer */
 		usb_set_serial_port_data(port, portdata);
-
-		/* initialize the in urbs */
-		for (j = 0; j < N_IN_URB; ++j) {
-			urb = usb_alloc_urb(0, GFP_KERNEL);
-			if (urb == NULL) {
-				dev_dbg(&port->dev, "%s: alloc for in "
-					"port failed.", __func__);
-				continue;
-			}
-			/* Fill URB using supplied data. */
-			usb_fill_bulk_urb(urb, serial->dev,
-					  usb_rcvbulkpipe(serial->dev,
-						port->bulk_in_endpointAddress),
-					  portdata->in_buffer[j], IN_BUFLEN,
-					  sierra_indat_callback, port);
-			portdata->in_urbs[j] = urb;
-		}
 	}
 
 	return 0;
@@ -701,7 +811,7 @@ static int sierra_startup(struct usb_serial *serial)
 
 static void sierra_shutdown(struct usb_serial *serial)
 {
-	int i, j;
+	int i;
 	struct usb_serial_port *port;
 	struct sierra_port_private *portdata;
 
@@ -714,12 +824,6 @@ static void sierra_shutdown(struct usb_serial *serial)
 		portdata = usb_get_serial_port_data(port);
 		if (!portdata)
 			continue;
-
-		for (j = 0; j < N_IN_URB; j++) {
-			usb_kill_urb(portdata->in_urbs[j]);
-			usb_free_urb(portdata->in_urbs[j]);
-			kfree(portdata->in_buffer[j]);
-		}
 		kfree(portdata);
 		usb_set_serial_port_data(port, NULL);
 	}
@@ -737,6 +841,7 @@ static struct usb_serial_driver sierra_device = {
 	.probe		   = sierra_probe,
 	.open              = sierra_open,
 	.close             = sierra_close,
+	.dtr_rts	   = sierra_dtr_rts,
 	.write             = sierra_write,
 	.write_room        = sierra_write_room,
 	.set_termios       = sierra_set_termios,

drivers/usb/serial/spcp8x5.c

@@ -446,66 +446,47 @@ static void spcp8x5_set_workMode(struct usb_device *dev, u16 value,
 			"RTSCTS usb_control_msg(enable flowctrl) = %d\n", ret);
 }
 
+static int spcp8x5_carrier_raised(struct usb_serial_port *port)
+{
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	if (priv->line_status & MSR_STATUS_LINE_DCD)
+		return 1;
+	return 0;
+}
+
+static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	u8 control;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (on)
+		priv->line_control = MCR_CONTROL_LINE_DTR
+						| MCR_CONTROL_LINE_RTS;
+	else
+		priv->line_control &= ~ (MCR_CONTROL_LINE_DTR
+						| MCR_CONTROL_LINE_RTS);
+	control = priv->line_control;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
+}
+
 /* close the serial port. We should wait for data sending to device 1st and
  * then kill all urb. */
-static void spcp8x5_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void spcp8x5_close(struct usb_serial_port *port)
 {
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
-	unsigned int c_cflag;
-	int bps;
-	long timeout;
-	wait_queue_t wait;
 	int result;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/* wait for data to drain from the buffer */
 	spin_lock_irqsave(&priv->lock, flags);
-	timeout = SPCP8x5_CLOSING_WAIT;
-	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&tty->write_wait, &wait);
-	for (;;) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (ringbuf_avail_data(priv->buf) == 0 ||
-		    timeout == 0 || signal_pending(current))
-			break;
-		spin_unlock_irqrestore(&priv->lock, flags);
-		timeout = schedule_timeout(timeout);
-		spin_lock_irqsave(&priv->lock, flags);
-	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&tty->write_wait, &wait);
-
 	/* clear out any remaining data in the buffer */
 	clear_ringbuf(priv->buf);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/* wait for characters to drain from the device (this is long enough
-	 * for the entire all byte spcp8x5 hardware buffer to drain with no
-	 * flow control for data rates of 1200 bps or more, for lower rates we
-	 * should really know how much data is in the buffer to compute a delay
-	 * that is not unnecessarily long) */
-	bps = tty_get_baud_rate(tty);
-	if (bps > 1200)
-		timeout = max((HZ*2560) / bps, HZ/10);
-	else
-		timeout = 2*HZ;
-	set_current_state(TASK_INTERRUPTIBLE);
-	schedule_timeout(timeout);
-
-	/* clear control lines */
-	if (tty) {
-		c_cflag = tty->termios->c_cflag;
-		if (c_cflag & HUPCL) {
-			spin_lock_irqsave(&priv->lock, flags);
-			priv->line_control = 0;
-			spin_unlock_irqrestore(&priv->lock, flags);
-			spcp8x5_set_ctrlLine(port->serial->dev, 0 , priv->type);
-		}
-	}
-
 	/* kill urb */
 	if (port->write_urb != NULL) {
 		result = usb_unlink_urb(port->write_urb);
@@ -665,13 +646,6 @@ static int spcp8x5_open(struct tty_struct *tty,
 	if (ret)
 		return ret;
 
-	spin_lock_irqsave(&priv->lock, flags);
-	if (tty && (tty->termios->c_cflag & CBAUD))
-		priv->line_control = MCR_DTR | MCR_RTS;
-	else
-		priv->line_control = 0;
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type);
 
 	/* Setup termios */
@@ -691,9 +665,10 @@ static int spcp8x5_open(struct tty_struct *tty,
 	port->read_urb->dev = serial->dev;
 	ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (ret) {
-		spcp8x5_close(tty, port, NULL);
+		spcp8x5_close(port);
 		return -EPROTO;
 	}
+	port->port.drain_delay = 256;
 	return 0;
 }
 
@@ -1033,6 +1008,8 @@ static struct usb_serial_driver spcp8x5_device = {
 	.num_ports		= 1,
 	.open 			= spcp8x5_open,
 	.close 			= spcp8x5_close,
+	.dtr_rts		= spcp8x5_dtr_rts,
+	.carrier_raised		= spcp8x5_carrier_raised,
 	.write 			= spcp8x5_write,
 	.set_termios 		= spcp8x5_set_termios,
 	.ioctl 			= spcp8x5_ioctl,

drivers/usb/serial/symbolserial.c

@@ -152,8 +152,7 @@ static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port,
 	return result;
 }
 
-static void symbol_close(struct tty_struct *tty, struct usb_serial_port *port,
-			  struct file *filp)
+static void symbol_close(struct usb_serial_port *port)
 {
 	struct symbol_private *priv = usb_get_serial_data(port->serial);
 

drivers/usb/serial/ti_usb_3410_5052.c

@@ -100,8 +100,7 @@ static int ti_startup(struct usb_serial *serial);
 static void ti_shutdown(struct usb_serial *serial);
 static int ti_open(struct tty_struct *tty, struct usb_serial_port *port,
 		struct file *file);
-static void ti_close(struct tty_struct *tty, struct usb_serial_port *port,
-		struct file *file);
+static void ti_close(struct usb_serial_port *port);
 static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
 		const unsigned char *data, int count);
 static int ti_write_room(struct tty_struct *tty);
@@ -647,8 +646,7 @@ release_lock:
 }
 
 
-static void ti_close(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *file)
+static void ti_close(struct usb_serial_port *port)
 {
 	struct ti_device *tdev;
 	struct ti_port *tport;

drivers/usb/serial/usb-serial.c

@@ -238,9 +238,11 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
 			goto bailout_interface_put;
 		mutex_unlock(&serial->disc_mutex);
 	}
-
 	mutex_unlock(&port->mutex);
-	return 0;
+	/* Now do the correct tty layer semantics */
+	retval = tty_port_block_til_ready(&port->port, tty, filp);
+	if (retval == 0)
+		return 0;
 
 bailout_interface_put:
 	usb_autopm_put_interface(serial->interface);
@@ -259,64 +261,89 @@ bailout_serial_put:
 	return retval;
 }
 
-static void serial_close(struct tty_struct *tty, struct file *filp)
+/**
+ *	serial_do_down		-	shut down hardware
+ *	@port: port to shut down
+ *
+ *	Shut down a USB port unless it is the console. We never shut down the
+ *	console hardware as it will always be in use.
+ *
+ *	Don't free any resources at this point
+ */
+static void serial_do_down(struct usb_serial_port *port)
 {
-	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial_driver *drv = port->serial->type;
 	struct usb_serial *serial;
 	struct module *owner;
-	int count;
 
-	if (!port)
+	/* The console is magical, do not hang up the console hardware
+	   or there will be tears */
+	if (port->console)
 		return;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	mutex_lock(&port->mutex);
 	serial = port->serial;
 	owner = serial->type->driver.owner;
 
-	if (port->port.count == 0) {
-		mutex_unlock(&port->mutex);
-		return;
-	}
-
-	if (port->port.count == 1)
-		/* only call the device specific close if this
-		 * port is being closed by the last owner. Ensure we do
-		 * this before we drop the port count. The call is protected
-		 * by the port mutex
-		 */
-		serial->type->close(tty, port, filp);
-
-	if (port->port.count == (port->console ? 2 : 1)) {
-		struct tty_struct *tty = tty_port_tty_get(&port->port);
-		if (tty) {
-			/* We must do this before we drop the port count to
-			   zero. */
-			if (tty->driver_data)
-				tty->driver_data = NULL;
-			tty_port_tty_set(&port->port, NULL);
-			tty_kref_put(tty);
-		}
-	}
+	if (drv->close)
+		drv->close(port);
 
-	--port->port.count;
-	count = port->port.count;
 	mutex_unlock(&port->mutex);
-	put_device(&port->dev);
+}
+
+/**
+ *	serial_do_free		-	free resources post close/hangup
+ *	@port: port to free up
+ *
+ *	Do the resource freeing and refcount dropping for the port. We must
+ *	be careful about ordering and we must avoid freeing up the console.
+ */
 
+static void serial_do_free(struct usb_serial_port *port)
+{
+	struct usb_serial *serial;
+	struct module *owner;
+
+	/* The console is magical, do not hang up the console hardware
+	   or there will be tears */
+	if (port->console)
+		return;
+
+	serial = port->serial;
+	owner = serial->type->driver.owner;
+	put_device(&port->dev);
 	/* Mustn't dereference port any more */
-	if (count == 0) {
-		mutex_lock(&serial->disc_mutex);
-		if (!serial->disconnected)
-			usb_autopm_put_interface(serial->interface);
-		mutex_unlock(&serial->disc_mutex);
-	}
+	mutex_lock(&serial->disc_mutex);
+	if (!serial->disconnected)
+		usb_autopm_put_interface(serial->interface);
+	mutex_unlock(&serial->disc_mutex);
 	usb_serial_put(serial);
-
 	/* Mustn't dereference serial any more */
-	if (count == 0)
-		module_put(owner);
+	module_put(owner);
+}
+
+static void serial_close(struct tty_struct *tty, struct file *filp)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	dbg("%s - port %d", __func__, port->number);
+
+
+	if (tty_port_close_start(&port->port, tty, filp) == 0)
+		return;
+
+	serial_do_down(port);		
+	tty_port_close_end(&port->port, tty);
+	tty_port_tty_set(&port->port, NULL);
+	serial_do_free(port);
+}
+
+static void serial_hangup(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	serial_do_down(port);
+	tty_port_hangup(&port->port);
+	serial_do_free(port);
 }
 
 static int serial_write(struct tty_struct *tty, const unsigned char *buf,
@@ -648,6 +675,29 @@ static struct usb_serial_driver *search_serial_device(
 	return NULL;
 }
 
+static int serial_carrier_raised(struct tty_port *port)
+{
+	struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
+	struct usb_serial_driver *drv = p->serial->type;
+	if (drv->carrier_raised)
+		return drv->carrier_raised(p);
+	/* No carrier control - don't block */
+	return 1;	
+}
+
+static void serial_dtr_rts(struct tty_port *port, int on)
+{
+	struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
+	struct usb_serial_driver *drv = p->serial->type;
+	if (drv->dtr_rts)
+		drv->dtr_rts(p, on);
+}
+
+static const struct tty_port_operations serial_port_ops = {
+	.carrier_raised = serial_carrier_raised,
+	.dtr_rts = serial_dtr_rts,
+};
+
 int usb_serial_probe(struct usb_interface *interface,
 			       const struct usb_device_id *id)
 {
@@ -841,6 +891,7 @@ int usb_serial_probe(struct usb_interface *interface,
 		if (!port)
 			goto probe_error;
 		tty_port_init(&port->port);
+		port->port.ops = &serial_port_ops;
 		port->serial = serial;
 		spin_lock_init(&port->lock);
 		mutex_init(&port->mutex);
@@ -1071,6 +1122,9 @@ void usb_serial_disconnect(struct usb_interface *interface)
 		if (port) {
 			struct tty_struct *tty = tty_port_tty_get(&port->port);
 			if (tty) {
+				/* The hangup will occur asynchronously but
+				   the object refcounts will sort out all the
+				   cleanup */
 				tty_hangup(tty);
 				tty_kref_put(tty);
 			}
@@ -1135,6 +1189,7 @@ static const struct tty_operations serial_ops = {
 	.open =			serial_open,
 	.close =		serial_close,
 	.write =		serial_write,
+	.hangup = 		serial_hangup,
 	.write_room =		serial_write_room,
 	.ioctl =		serial_ioctl,
 	.set_termios =		serial_set_termios,
@@ -1147,6 +1202,7 @@ static const struct tty_operations serial_ops = {
 	.proc_fops =		&serial_proc_fops,
 };
 
+
 struct tty_driver *usb_serial_tty_driver;
 
 static int __init usb_serial_init(void)

drivers/usb/serial/visor.c

@@ -38,8 +38,7 @@
 /* function prototypes for a handspring visor */
 static int  visor_open(struct tty_struct *tty, struct usb_serial_port *port,
 					struct file *filp);
-static void visor_close(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filp);
+static void visor_close(struct usb_serial_port *port);
 static int  visor_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count);
 static int  visor_write_room(struct tty_struct *tty);
@@ -324,8 +323,7 @@ exit:
 }
 
 
-static void visor_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void visor_close(struct usb_serial_port *port)
 {
 	struct visor_private *priv = usb_get_serial_port_data(port);
 	unsigned char *transfer_buffer;

drivers/usb/serial/whiteheat.c

@@ -147,8 +147,7 @@ static int  whiteheat_attach(struct usb_serial *serial);
 static void whiteheat_shutdown(struct usb_serial *serial);
 static int  whiteheat_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-static void whiteheat_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static void whiteheat_close(struct usb_serial_port *port);
 static int  whiteheat_write(struct tty_struct *tty,
 			struct usb_serial_port *port,
 			const unsigned char *buf, int count);
@@ -712,8 +711,7 @@ exit:
 }
 
 
-static void whiteheat_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static void whiteheat_close(struct usb_serial_port *port)
 {
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
 	struct whiteheat_urb_wrap *wrap;
@@ -723,31 +721,7 @@ static void whiteheat_close(struct tty_struct *tty,
 
 	dbg("%s - port %d", __func__, port->number);
 
-	mutex_lock(&port->serial->disc_mutex);
-	/* filp is NULL when called from usb_serial_disconnect */
-	if ((filp && (tty_hung_up_p(filp))) || port->serial->disconnected) {
-		mutex_unlock(&port->serial->disc_mutex);
-		return;
-	}
-	mutex_unlock(&port->serial->disc_mutex);
-
-	tty->closing = 1;
-
-/*
- * Not currently in use; tty_wait_until_sent() calls
- * serial_chars_in_buffer() which deadlocks on the second semaphore
- * acquisition. This should be fixed at some point. Greg's been
- * notified.
-	if ((filp->f_flags & (O_NDELAY | O_NONBLOCK)) == 0) {
-		tty_wait_until_sent(tty, CLOSING_DELAY);
-	}
-*/
-
-	tty_driver_flush_buffer(tty);
-	tty_ldisc_flush(tty);
-
 	firm_report_tx_done(port);
-
 	firm_close(port);
 
 	/* shutdown our bulk reads and writes */
@@ -775,10 +749,7 @@ static void whiteheat_close(struct tty_struct *tty,
 	}
 	spin_unlock_irq(&info->lock);
 	mutex_unlock(&info->deathwarrant);
-
 	stop_command_port(port->serial);
-
-	tty->closing = 0;
 }
 
 

fs/devpts/inode.c

@@ -557,8 +557,10 @@ static int __init init_devpts_fs(void)
 	int err = register_filesystem(&devpts_fs_type);
 	if (!err) {
 		devpts_mnt = kern_mount(&devpts_fs_type);
-		if (IS_ERR(devpts_mnt))
+		if (IS_ERR(devpts_mnt)) {
 			err = PTR_ERR(devpts_mnt);
+			unregister_filesystem(&devpts_fs_type);
+		}
 	}
 	return err;
 }

include/linux/cyclades.h

@@ -142,19 +142,6 @@ struct CYZ_BOOT_CTRL {
 
 
 #ifndef DP_WINDOW_SIZE
-/* #include "cyclomz.h" */
-/****************** ****************** *******************/
-/*
- *	The data types defined below are used in all ZFIRM interface
- *	data structures. They accomodate differences between HW
- *	architectures and compilers.
- */
-
-typedef __u64  ucdouble;		/* 64 bits, unsigned */
-typedef __u32  uclong;			/* 32 bits, unsigned */
-typedef __u16  ucshort;		/* 16 bits, unsigned */
-typedef __u8   ucchar;			/* 8 bits, unsigned */
-
 /*
  *	Memory Window Sizes
  */
@@ -507,16 +494,20 @@ struct ZFW_CTRL {
 
 /* Per card data structure */
 struct cyclades_card {
-    void __iomem *base_addr;
-    void __iomem *ctl_addr;
-    int irq;
-    unsigned int num_chips;	/* 0 if card absent, -1 if Z/PCI, else Y */
-    unsigned int first_line;	/* minor number of first channel on card */
-    unsigned int nports;	/* Number of ports in the card */
-    int bus_index;		/* address shift - 0 for ISA, 1 for PCI */
-    int intr_enabled;		/* FW Interrupt flag - 0 disabled, 1 enabled */
-    spinlock_t card_lock;
-    struct cyclades_port *ports;
+	void __iomem *base_addr;
+	union {
+		void __iomem *p9050;
+		struct RUNTIME_9060 __iomem *p9060;
+	} ctl_addr;
+	int irq;
+	unsigned int num_chips;	/* 0 if card absent, -1 if Z/PCI, else Y */
+	unsigned int first_line;	/* minor number of first channel on card */
+	unsigned int nports;	/* Number of ports in the card */
+	int bus_index;		/* address shift - 0 for ISA, 1 for PCI */
+	int intr_enabled;		/* FW Interrupt flag - 0 disabled, 1 enabled */
+	u32 hw_ver;
+	spinlock_t card_lock;
+	struct cyclades_port *ports;
 };
 
 /***************************************

include/linux/pci_ids.h

@@ -1996,10 +1996,12 @@
 #define PCI_DEVICE_ID_OXSEMI_PCIe952_1_U	0xC118
 #define PCI_DEVICE_ID_OXSEMI_PCIe952_1_GU	0xC11C
 #define PCI_DEVICE_ID_OXSEMI_16PCI954	0x9501
+#define PCI_DEVICE_ID_OXSEMI_C950	0x950B
 #define PCI_DEVICE_ID_OXSEMI_16PCI95N	0x9511
 #define PCI_DEVICE_ID_OXSEMI_16PCI954PP	0x9513
 #define PCI_DEVICE_ID_OXSEMI_16PCI952	0x9521
 #define PCI_DEVICE_ID_OXSEMI_16PCI952PP	0x9523
+#define PCI_SUBDEVICE_ID_OXSEMI_C950	0x0001
 
 #define PCI_VENDOR_ID_CHELSIO		0x1425
 

include/linux/rational.h

@@ -0,0 +1,19 @@
+/*
+ * rational fractions
+ *
+ * Copyright (C) 2009 emlix GmbH, Oskar Schirmer <os@emlix.com>
+ *
+ * helper functions when coping with rational numbers,
+ * e.g. when calculating optimum numerator/denominator pairs for
+ * pll configuration taking into account restricted register size
+ */
+
+#ifndef _LINUX_RATIONAL_H
+#define _LINUX_RATIONAL_H
+
+void rational_best_approximation(
+	unsigned long given_numerator, unsigned long given_denominator,
+	unsigned long max_numerator, unsigned long max_denominator,
+	unsigned long *best_numerator, unsigned long *best_denominator);
+
+#endif /* _LINUX_RATIONAL_H */

include/linux/serial.h

@@ -96,54 +96,76 @@ struct serial_uart_config {
 
 /*
  * Definitions for async_struct (and serial_struct) flags field
+ *
+ * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
  */
-#define ASYNC_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes 
-				   on the callout port */
-#define ASYNC_FOURPORT  0x0002	/* Set OU1, OUT2 per AST Fourport settings */
-#define ASYNC_SAK	0x0004	/* Secure Attention Key (Orange book) */
-#define ASYNC_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */
-
-#define ASYNC_SPD_MASK	0x1030
-#define ASYNC_SPD_HI	0x0010	/* Use 56000 instead of 38400 bps */
-
-#define ASYNC_SPD_VHI	0x0020  /* Use 115200 instead of 38400 bps */
-#define ASYNC_SPD_CUST	0x0030  /* Use user-specified divisor */
-
-#define ASYNC_SKIP_TEST	0x0040 /* Skip UART test during autoconfiguration */
-#define ASYNC_AUTO_IRQ  0x0080 /* Do automatic IRQ during autoconfiguration */
-#define ASYNC_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */
-#define ASYNC_PGRP_LOCKOUT    0x0200 /* Lock out cua opens based on pgrp */
-#define ASYNC_CALLOUT_NOHUP   0x0400 /* Don't do hangups for cua device */
-
-#define ASYNC_HARDPPS_CD	0x0800	/* Call hardpps when CD goes high  */
-
-#define ASYNC_SPD_SHI	0x1000	/* Use 230400 instead of 38400 bps */
-#define ASYNC_SPD_WARP	0x1010	/* Use 460800 instead of 38400 bps */
-
-#define ASYNC_LOW_LATENCY 0x2000 /* Request low latency behaviour */
-
-#define ASYNC_BUGGY_UART  0x4000 /* This is a buggy UART, skip some safety
-				  * checks.  Note: can be dangerous! */
-
-#define ASYNC_AUTOPROBE	 0x8000 /* Port was autoprobed by PCI or PNP code */
-
-#define ASYNC_FLAGS	0x7FFF	/* Possible legal async flags */
-#define ASYNC_USR_MASK	0x3430	/* Legal flags that non-privileged
-				 * users can set or reset */
-
-/* Internal flags used only by kernel/chr_drv/serial.c */
-#define ASYNC_INITIALIZED	0x80000000 /* Serial port was initialized */
-#define ASYNC_NORMAL_ACTIVE	0x20000000 /* Normal device is active */
-#define ASYNC_BOOT_AUTOCONF	0x10000000 /* Autoconfigure port on bootup */
-#define ASYNC_CLOSING		0x08000000 /* Serial port is closing */
-#define ASYNC_CTS_FLOW		0x04000000 /* Do CTS flow control */
-#define ASYNC_CHECK_CD		0x02000000 /* i.e., CLOCAL */
-#define ASYNC_SHARE_IRQ		0x01000000 /* for multifunction cards
-					     --- no longer used */
-#define ASYNC_CONS_FLOW		0x00800000 /* flow control for console  */
-
-#define ASYNC_BOOT_ONLYMCA	0x00400000 /* Probe only if MCA bus */
-#define ASYNC_INTERNAL_FLAGS	0xFFC00000 /* Internal flags */
+#define ASYNCB_HUP_NOTIFY	 0 /* Notify getty on hangups and closes
+				    * on the callout port */
+#define ASYNCB_FOURPORT		 1 /* Set OU1, OUT2 per AST Fourport settings */
+#define ASYNCB_SAK		 2 /* Secure Attention Key (Orange book) */
+#define ASYNCB_SPLIT_TERMIOS	 3 /* Separate termios for dialin/callout */
+#define ASYNCB_SPD_HI		 4 /* Use 56000 instead of 38400 bps */
+#define ASYNCB_SPD_VHI		 5 /* Use 115200 instead of 38400 bps */
+#define ASYNCB_SKIP_TEST	 6 /* Skip UART test during autoconfiguration */
+#define ASYNCB_AUTO_IRQ		 7 /* Do automatic IRQ during
+				    * autoconfiguration */
+#define ASYNCB_SESSION_LOCKOUT	 8 /* Lock out cua opens based on session */
+#define ASYNCB_PGRP_LOCKOUT	 9 /* Lock out cua opens based on pgrp */
+#define ASYNCB_CALLOUT_NOHUP	10 /* Don't do hangups for cua device */
+#define ASYNCB_HARDPPS_CD	11 /* Call hardpps when CD goes high  */
+#define ASYNCB_SPD_SHI		12 /* Use 230400 instead of 38400 bps */
+#define ASYNCB_LOW_LATENCY	13 /* Request low latency behaviour */
+#define ASYNCB_BUGGY_UART	14 /* This is a buggy UART, skip some safety
+				    * checks.  Note: can be dangerous! */
+#define ASYNCB_AUTOPROBE	15 /* Port was autoprobed by PCI or PNP code */
+#define ASYNCB_LAST_USER	15
+
+/* Internal flags used only by kernel */
+#define ASYNCB_INITIALIZED	31 /* Serial port was initialized */
+#define ASYNCB_NORMAL_ACTIVE	29 /* Normal device is active */
+#define ASYNCB_BOOT_AUTOCONF	28 /* Autoconfigure port on bootup */
+#define ASYNCB_CLOSING		27 /* Serial port is closing */
+#define ASYNCB_CTS_FLOW		26 /* Do CTS flow control */
+#define ASYNCB_CHECK_CD		25 /* i.e., CLOCAL */
+#define ASYNCB_SHARE_IRQ	24 /* for multifunction cards, no longer used */
+#define ASYNCB_CONS_FLOW	23 /* flow control for console  */
+#define ASYNCB_BOOT_ONLYMCA	22 /* Probe only if MCA bus */
+#define ASYNCB_FIRST_KERNEL	22
+
+#define ASYNC_HUP_NOTIFY	(1U << ASYNCB_HUP_NOTIFY)
+#define ASYNC_FOURPORT		(1U << ASYNCB_FOURPORT)
+#define ASYNC_SAK		(1U << ASYNCB_SAK)
+#define ASYNC_SPLIT_TERMIOS	(1U << ASYNCB_SPLIT_TERMIOS)
+#define ASYNC_SPD_HI		(1U << ASYNCB_SPD_HI)
+#define ASYNC_SPD_VHI		(1U << ASYNCB_SPD_VHI)
+#define ASYNC_SKIP_TEST		(1U << ASYNCB_SKIP_TEST)
+#define ASYNC_AUTO_IRQ		(1U << ASYNCB_AUTO_IRQ)
+#define ASYNC_SESSION_LOCKOUT	(1U << ASYNCB_SESSION_LOCKOUT)
+#define ASYNC_PGRP_LOCKOUT	(1U << ASYNCB_PGRP_LOCKOUT)
+#define ASYNC_CALLOUT_NOHUP	(1U << ASYNCB_CALLOUT_NOHUP)
+#define ASYNC_HARDPPS_CD	(1U << ASYNCB_HARDPPS_CD)
+#define ASYNC_SPD_SHI		(1U << ASYNCB_SPD_SHI)
+#define ASYNC_LOW_LATENCY	(1U << ASYNCB_LOW_LATENCY)
+#define ASYNC_BUGGY_UART	(1U << ASYNCB_BUGGY_UART)
+#define ASYNC_AUTOPROBE		(1U << ASYNCB_AUTOPROBE)
+
+#define ASYNC_FLAGS		((1U << ASYNCB_LAST_USER) - 1)
+#define ASYNC_USR_MASK		(ASYNC_SPD_HI|ASYNC_SPD_VHI| \
+		ASYNC_CALLOUT_NOHUP|ASYNC_SPD_SHI|ASYNC_LOW_LATENCY)
+#define ASYNC_SPD_CUST		(ASYNC_SPD_HI|ASYNC_SPD_VHI)
+#define ASYNC_SPD_WARP		(ASYNC_SPD_HI|ASYNC_SPD_SHI)
+#define ASYNC_SPD_MASK		(ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
+
+#define ASYNC_INITIALIZED	(1U << ASYNCB_INITIALIZED)
+#define ASYNC_NORMAL_ACTIVE	(1U << ASYNCB_NORMAL_ACTIVE)
+#define ASYNC_BOOT_AUTOCONF	(1U << ASYNCB_BOOT_AUTOCONF)
+#define ASYNC_CLOSING		(1U << ASYNCB_CLOSING)
+#define ASYNC_CTS_FLOW		(1U << ASYNCB_CTS_FLOW)
+#define ASYNC_CHECK_CD		(1U << ASYNCB_CHECK_CD)
+#define ASYNC_SHARE_IRQ		(1U << ASYNCB_SHARE_IRQ)
+#define ASYNC_CONS_FLOW		(1U << ASYNCB_CONS_FLOW)
+#define ASYNC_BOOT_ONLYMCA	(1U << ASYNCB_BOOT_ONLYMCA)
+#define ASYNC_INTERNAL_FLAGS	(~((1U << ASYNCB_FIRST_KERNEL) - 1))
 
 /*
  * Multiport serial configuration structure --- external structure

include/linux/serial_core.h

@@ -41,7 +41,8 @@
 #define PORT_XSCALE	15
 #define PORT_RM9000	16	/* PMC-Sierra RM9xxx internal UART */
 #define PORT_OCTEON	17	/* Cavium OCTEON internal UART */
-#define PORT_MAX_8250	17	/* max port ID */
+#define PORT_AR7	18	/* Texas Instruments AR7 internal UART */
+#define PORT_MAX_8250	18	/* max port ID */
 
 /*
  * ARM specific type numbers.  These are not currently guaranteed
@@ -167,6 +168,9 @@
 /* MAX3100 */
 #define PORT_MAX3100    86
 
+/* Timberdale UART */
+#define PORT_TIMBUART	87
+
 #ifdef __KERNEL__
 
 #include <linux/compiler.h>

include/linux/tty.h

@@ -185,7 +185,7 @@ struct tty_port;
 struct tty_port_operations {
 	/* Return 1 if the carrier is raised */
 	int (*carrier_raised)(struct tty_port *port);
-	void (*raise_dtr_rts)(struct tty_port *port);
+	void (*dtr_rts)(struct tty_port *port, int raise);
 };
 	
 struct tty_port {
@@ -201,6 +201,9 @@ struct tty_port {
 	unsigned char		*xmit_buf;	/* Optional buffer */
 	int			close_delay;	/* Close port delay */
 	int			closing_wait;	/* Delay for output */
+	int			drain_delay;	/* Set to zero if no pure time
+						   based drain is needed else
+						   set to size of fifo */
 };
 
 /*
@@ -223,8 +226,11 @@ struct tty_struct {
 	struct tty_driver *driver;
 	const struct tty_operations *ops;
 	int index;
-	/* The ldisc objects are protected by tty_ldisc_lock at the moment */
-	struct tty_ldisc ldisc;
+
+	/* Protects ldisc changes: Lock tty not pty */
+	struct mutex ldisc_mutex;
+	struct tty_ldisc *ldisc;
+
 	struct mutex termios_mutex;
 	spinlock_t ctrl_lock;
 	/* Termios values are protected by the termios mutex */
@@ -311,6 +317,7 @@ struct tty_struct {
 #define TTY_CLOSING 		7	/* ->close() in progress */
 #define TTY_LDISC 		9	/* Line discipline attached */
 #define TTY_LDISC_CHANGING 	10	/* Line discipline changing */
+#define TTY_LDISC_OPEN	 	11	/* Line discipline is open */
 #define TTY_HW_COOK_OUT 	14	/* Hardware can do output cooking */
 #define TTY_HW_COOK_IN 		15	/* Hardware can do input cooking */
 #define TTY_PTY_LOCK 		16	/* pty private */
@@ -403,6 +410,7 @@ extern int tty_termios_hw_change(struct ktermios *a, struct ktermios *b);
 extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *);
 extern void tty_ldisc_deref(struct tty_ldisc *);
 extern struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *);
+extern void tty_ldisc_hangup(struct tty_struct *tty);
 extern const struct file_operations tty_ldiscs_proc_fops;
 
 extern void tty_wakeup(struct tty_struct *tty);
@@ -425,6 +433,9 @@ extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,
 extern void tty_release_dev(struct file *filp);
 extern int tty_init_termios(struct tty_struct *tty);
 
+extern struct tty_struct *tty_pair_get_tty(struct tty_struct *tty);
+extern struct tty_struct *tty_pair_get_pty(struct tty_struct *tty);
+
 extern struct mutex tty_mutex;
 
 extern void tty_write_unlock(struct tty_struct *tty);
@@ -438,6 +449,7 @@ extern struct tty_struct *tty_port_tty_get(struct tty_port *port);
 extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty);
 extern int tty_port_carrier_raised(struct tty_port *port);
 extern void tty_port_raise_dtr_rts(struct tty_port *port);
+extern void tty_port_lower_dtr_rts(struct tty_port *port);
 extern void tty_port_hangup(struct tty_port *port);
 extern int tty_port_block_til_ready(struct tty_port *port,
 				struct tty_struct *tty, struct file *filp);

include/linux/tty_driver.h

@@ -127,7 +127,8 @@
  * 	the line discipline are close to full, and it should somehow
  * 	signal that no more characters should be sent to the tty.
  *
- *	Optional: Always invoke via tty_throttle();
+ *	Optional: Always invoke via tty_throttle(), called under the
+ *	termios lock.
  * 
  * void (*unthrottle)(struct tty_struct * tty);
  *
@@ -135,7 +136,8 @@
  * 	that characters can now be sent to the tty without fear of
  * 	overrunning the input buffers of the line disciplines.
  * 
- *	Optional: Always invoke via tty_unthrottle();
+ *	Optional: Always invoke via tty_unthrottle(), called under the
+ *	termios lock.
  *
  * void (*stop)(struct tty_struct *tty);
  *

include/linux/usb/serial.h

@@ -224,8 +224,7 @@ struct usb_serial_driver {
 	/* Called by console with tty = NULL and by tty */
 	int  (*open)(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp);
-	void (*close)(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+	void (*close)(struct usb_serial_port *port);
 	int  (*write)(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count);
 	/* Called only by the tty layer */
@@ -241,6 +240,10 @@ struct usb_serial_driver {
 	int  (*tiocmget)(struct tty_struct *tty, struct file *file);
 	int  (*tiocmset)(struct tty_struct *tty, struct file *file,
 			 unsigned int set, unsigned int clear);
+	/* Called by the tty layer for port level work. There may or may not
+	   be an attached tty at this point */
+	void (*dtr_rts)(struct usb_serial_port *port, int on);
+	int  (*carrier_raised)(struct usb_serial_port *port);
 	/* USB events */
 	void (*read_int_callback)(struct urb *urb);
 	void (*write_int_callback)(struct urb *urb);
@@ -283,8 +286,7 @@ extern int usb_serial_generic_open(struct tty_struct *tty,
 		struct usb_serial_port *port, struct file *filp);
 extern int usb_serial_generic_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count);
-extern void usb_serial_generic_close(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+extern void usb_serial_generic_close(struct usb_serial_port *port);
 extern int usb_serial_generic_resume(struct usb_serial *serial);
 extern int usb_serial_generic_write_room(struct tty_struct *tty);
 extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty);

lib/Kconfig

@@ -10,6 +10,9 @@ menu "Library routines"
 config BITREVERSE
 	tristate
 
+config RATIONAL
+	boolean
+
 config GENERIC_FIND_FIRST_BIT
 	bool
 

lib/Makefile

@@ -50,6 +50,7 @@ ifneq ($(CONFIG_HAVE_DEC_LOCK),y)
 endif
 
 obj-$(CONFIG_BITREVERSE) += bitrev.o
+obj-$(CONFIG_RATIONAL)	+= rational.o
 obj-$(CONFIG_CRC_CCITT)	+= crc-ccitt.o
 obj-$(CONFIG_CRC16)	+= crc16.o
 obj-$(CONFIG_CRC_T10DIF)+= crc-t10dif.o

lib/rational.c

@@ -0,0 +1,62 @@
+/*
+ * rational fractions
+ *
+ * Copyright (C) 2009 emlix GmbH, Oskar Schirmer <os@emlix.com>
+ *
+ * helper functions when coping with rational numbers
+ */
+
+#include <linux/rational.h>
+
+/*
+ * calculate best rational approximation for a given fraction
+ * taking into account restricted register size, e.g. to find
+ * appropriate values for a pll with 5 bit denominator and
+ * 8 bit numerator register fields, trying to set up with a
+ * frequency ratio of 3.1415, one would say:
+ *
+ * rational_best_approximation(31415, 10000,
+ *		(1 << 8) - 1, (1 << 5) - 1, &n, &d);
+ *
+ * you may look at given_numerator as a fixed point number,
+ * with the fractional part size described in given_denominator.
+ *
+ * for theoretical background, see:
+ * http://en.wikipedia.org/wiki/Continued_fraction
+ */
+
+void rational_best_approximation(
+	unsigned long given_numerator, unsigned long given_denominator,
+	unsigned long max_numerator, unsigned long max_denominator,
+	unsigned long *best_numerator, unsigned long *best_denominator)
+{
+	unsigned long n, d, n0, d0, n1, d1;
+	n = given_numerator;
+	d = given_denominator;
+	n0 = d1 = 0;
+	n1 = d0 = 1;
+	for (;;) {
+		unsigned long t, a;
+		if ((n1 > max_numerator) || (d1 > max_denominator)) {
+			n1 = n0;
+			d1 = d0;
+			break;
+		}
+		if (d == 0)
+			break;
+		t = d;
+		a = n / d;
+		d = n % d;
+		n = t;
+		t = n0 + a * n1;
+		n0 = n1;
+		n1 = t;
+		t = d0 + a * d1;
+		d0 = d1;
+		d1 = t;
+	}
+	*best_numerator = n1;
+	*best_denominator = d1;
+}
+
+EXPORT_SYMBOL(rational_best_approximation);