[ARM] 4510/1: S3C: split debug-macro support into plat-s3c

Move the common parts of the debug macros into include/asm-arm/plat-s3c
ready to be used for the common S3C support.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

include/asm-arm/arch-s3c2410/debug-macro.S

@@ -13,13 +13,15 @@
 */
 
 #include <asm/arch/map.h>
-#include <asm/plat-s3c/regs-serial.h>
 #include <asm/arch/regs-gpio.h>
 
+#include <asm/plat-s3c/regs-serial.h>
+#include <asm/plat-s3c/debug-macro.S>
+
 #define S3C2410_UART1_OFF (0x4000)
 #define SHIFT_2440TXF (14-9)
 
-		.macro addruart, rx
+	.macro addruart, rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1
 		ldreq	\rx, = S3C24XX_PA_UART
@@ -27,18 +29,9 @@
 #if CONFIG_DEBUG_S3C2410_UART != 0
 		add	\rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C2410_UART)
 #endif
-		.endm
+	.endm
 
-		.macro	senduart,rd,rx
-		strb 	\rd, [\rx, # S3C2410_UTXH ]
-		.endm
-
-		.macro	busyuart, rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFCON ]
-		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
-		beq	1001f				@
-		@ FIFO enabled...
-1003:
+	.macro fifo_full rd, rx
 		@ check for arm920 vs arm926. currently assume all arm926
 		@ devices have an 64 byte FIFO identical to the s3c2440
 		mrc	p15, 0, \rd, c0, c0
@@ -57,25 +50,9 @@
 		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
 		moveq	\rd, \rd, lsr #SHIFT_2440TXF
 		tst	\rd, #S3C2410_UFSTAT_TXFULL
-		bne	1003b
-		b	1002f
-
-1001:
-		@ busy waiting for non fifo
-		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
-		tst	\rd, #S3C2410_UTRSTAT_TXFE
-		beq	1001b
+	.endm
 
-1002:		@ exit busyuart
-		.endm
-
-		.macro	waituart,rd,rx
-
-		ldr	\rd, [ \rx, # S3C2410_UFCON ]
-		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
-		beq	1001f				@
-		@ FIFO enabled...
-1003:
+	.macro fifo_level rd, rx
 		mrc	p15, 0, \rd, c1, c0
 		tst	\rd, #1
 		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
@@ -88,15 +65,4 @@
 		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
 		andne	\rd, \rd, #S3C2410_UFSTAT_TXMASK
 		andeq	\rd, \rd, #S3C2440_UFSTAT_TXMASK
-		teq	\rd, #0
-		bne	1003b
-		b	1002f
-
-1001:
-		@ idle waiting for non fifo
-		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
-		tst	\rd, #S3C2410_UTRSTAT_TXFE
-		beq	1001b
-
-1002:		@ exit busyuart
-		.endm
+	.endm

include/asm-arm/plat-s3c/debug-macro.S

@@ -0,0 +1,57 @@
+/* linux/include/asm-arm/plat-s3c/debug-macro.S
+ *
+ * Copyright 2005, 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <asm/plat-s3c/regs-serial.h>
+
+#define S3C2410_UART1_OFF (0x4000)
+
+	.macro	senduart,rd,rx
+		strb 	\rd, [\rx, # S3C2410_UTXH ]
+	.endm
+
+	.macro	busyuart, rd, rx
+		ldr	\rd, [ \rx, # S3C2410_UFCON ]
+		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
+		beq	1001f				@
+		@ FIFO enabled...
+1003:
+		fifo_full \rd, \rx
+		bne	1003b
+		b	1002f
+
+1001:
+		@ busy waiting for non fifo
+		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
+		tst	\rd, #S3C2410_UTRSTAT_TXFE
+		beq	1001b
+
+1002:		@ exit busyuart
+	.endm
+
+	.macro	waituart,rd,rx
+
+		ldr	\rd, [ \rx, # S3C2410_UFCON ]
+		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
+		beq	1001f				@
+		@ FIFO enabled...
+1003:
+		fifo_level \rd, \rx
+		teq	\rd, #0
+		bne	1003b
+		b	1002f
+1001:
+		@ idle waiting for non fifo
+		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
+		tst	\rd, #S3C2410_UTRSTAT_TXFE
+		beq	1001b
+
+1002:		@ exit busyuart
+	.endm