Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (119 commits)
  MIPS: Delete unused function add_temporary_entry.
  MIPS: Set default pci cache line size.
  MIPS: Flush huge TLB
  MIPS: Octeon: Remove SYS_SUPPORTS_HIGHMEM.
  MIPS: Octeon: Add support for OCTEON II PCIe
  MIPS: Octeon: Update PCI Latency timer and enable more error reporting.
  MIPS: Alchemy: Update cpu-feature-overrides
  MIPS: Alchemy: db1200: Improve PB1200 detection.
  MIPS: Alchemy: merge Au1000 and Au1300-style IRQ controller code.
  MIPS: Alchemy: chain IRQ controllers to MIPS IRQ controller
  MIPS: Alchemy: irq: register pm at irq init time
  MIPS: Alchemy: Touchscreen support on DB1100
  MIPS: Alchemy: Hook up IrDA on DB1000/DB1100
  net/irda: convert au1k_ir to platform driver.
  MIPS: Alchemy: remove unused board headers
  MTD: nand: make au1550nd.c a platform_driver
  MIPS: Netlogic: Mark Netlogic chips as SMT capable
  MIPS: Netlogic: Add support for XLP 3XX cores
  MIPS: Netlogic: Merge some of XLR/XLP wakup code
  MIPS: Netlogic: Add default XLP config.
  ...

Fix up trivial conflicts in arch/mips/kernel/{perf_event_mipsxx.c,
traps.c} and drivers/tty/serial/Makefile

arch/mips/Kconfig

@@ -719,7 +719,6 @@ config CAVIUM_OCTEON_SIMULATOR
 	select DMA_COHERENT
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_HOTPLUG_CPU
 	select SYS_HAS_CPU_CAVIUM_OCTEON
 	select HOLES_IN_ZONE
@@ -735,7 +734,6 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
 	select DMA_COHERENT
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_HOTPLUG_CPU
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_HAS_CPU_CAVIUM_OCTEON
@@ -764,7 +762,6 @@ config NLM_XLR_BOARD
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select NLM_COMMON
-	select NLM_XLR
 	select SYS_HAS_CPU_XLR
 	select SYS_SUPPORTS_SMP
 	select HW_HAS_PCI
@@ -779,6 +776,7 @@ config NLM_XLR_BOARD
 	select CEVT_R4K
 	select CSRC_R4K
 	select IRQ_CPU
+	select ARCH_SUPPORTS_MSI
 	select ZONE_DMA if 64BIT
 	select SYNC_R4K
 	select SYS_HAS_EARLY_PRINTK
@@ -786,6 +784,33 @@ config NLM_XLR_BOARD
 	  Support for systems based on Netlogic XLR and XLS processors.
 	  Say Y here if you have a XLR or XLS based board.
 
+config NLM_XLP_BOARD
+	bool "Netlogic XLP based systems"
+	depends on EXPERIMENTAL
+	select BOOT_ELF32
+	select NLM_COMMON
+	select SYS_HAS_CPU_XLP
+	select SYS_SUPPORTS_SMP
+	select HW_HAS_PCI
+	select SWAP_IO_SPACE
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select 64BIT_PHYS_ADDR
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select DMA_COHERENT
+	select NR_CPUS_DEFAULT_32
+	select CEVT_R4K
+	select CSRC_R4K
+	select IRQ_CPU
+	select ZONE_DMA if 64BIT
+	select SYNC_R4K
+	select SYS_HAS_EARLY_PRINTK
+	help
+	  This board is based on Netlogic XLP Processor.
+	  Say Y here if you have a XLP based board.
+
 endchoice
 
 source "arch/mips/alchemy/Kconfig"
@@ -1416,51 +1441,36 @@ config CPU_CAVIUM_OCTEON
 config CPU_BMIPS3300
 	bool "BMIPS3300"
 	depends on SYS_HAS_CPU_BMIPS3300
-	select DMA_NONCOHERENT
-	select IRQ_CPU
-	select SWAP_IO_SPACE
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select WEAK_ORDERING
+	select CPU_BMIPS
 	help
 	  Broadcom BMIPS3300 processors.
 
 config CPU_BMIPS4350
 	bool "BMIPS4350"
 	depends on SYS_HAS_CPU_BMIPS4350
-	select CPU_SUPPORTS_32BIT_KERNEL
-	select DMA_NONCOHERENT
-	select IRQ_CPU
-	select SWAP_IO_SPACE
+	select CPU_BMIPS
 	select SYS_SUPPORTS_SMP
 	select SYS_SUPPORTS_HOTPLUG_CPU
-	select WEAK_ORDERING
 	help
 	  Broadcom BMIPS4350 ("VIPER") processors.
 
 config CPU_BMIPS4380
 	bool "BMIPS4380"
 	depends on SYS_HAS_CPU_BMIPS4380
-	select CPU_SUPPORTS_32BIT_KERNEL
-	select DMA_NONCOHERENT
-	select IRQ_CPU
-	select SWAP_IO_SPACE
+	select CPU_BMIPS
 	select SYS_SUPPORTS_SMP
 	select SYS_SUPPORTS_HOTPLUG_CPU
-	select WEAK_ORDERING
 	help
 	  Broadcom BMIPS4380 processors.
 
 config CPU_BMIPS5000
 	bool "BMIPS5000"
 	depends on SYS_HAS_CPU_BMIPS5000
-	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_BMIPS
 	select CPU_SUPPORTS_HIGHMEM
-	select DMA_NONCOHERENT
-	select IRQ_CPU
-	select SWAP_IO_SPACE
+	select MIPS_CPU_SCACHE
 	select SYS_SUPPORTS_SMP
 	select SYS_SUPPORTS_HOTPLUG_CPU
-	select WEAK_ORDERING
 	help
 	  Broadcom BMIPS5000 processors.
 
@@ -1475,6 +1485,19 @@ config CPU_XLR
 	select CPU_SUPPORTS_HUGEPAGES
 	help
 	  Netlogic Microsystems XLR/XLS processors.
+
+config CPU_XLP
+	bool "Netlogic XLP SoC"
+	depends on SYS_HAS_CPU_XLP
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+	select CPU_HAS_LLSC
+	select WEAK_ORDERING
+	select WEAK_REORDERING_BEYOND_LLSC
+	select CPU_HAS_PREFETCH
+	help
+	  Netlogic Microsystems XLP processors.
 endchoice
 
 if CPU_LOONGSON2F
@@ -1521,6 +1544,15 @@ config CPU_LOONGSON2
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 
+config CPU_BMIPS
+	bool
+	select CPU_MIPS32
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select SWAP_IO_SPACE
+	select WEAK_ORDERING
+
 config SYS_HAS_CPU_LOONGSON2E
 	bool
 
@@ -1608,6 +1640,9 @@ config SYS_HAS_CPU_BMIPS5000
 config SYS_HAS_CPU_XLR
 	bool
 
+config SYS_HAS_CPU_XLP
+	bool
+
 #
 # CPU may reorder R->R, R->W, W->R, W->W
 # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
@@ -1995,6 +2030,9 @@ config CPU_HAS_SMARTMIPS
 config CPU_HAS_WB
 	bool
 
+config XKS01
+	bool
+
 #
 # Vectored interrupt mode is an R2 feature
 #

arch/mips/Makefile

@@ -157,6 +157,7 @@ ifeq (,$(findstring march=octeon, $(cflags-$(CONFIG_CPU_CAVIUM_OCTEON))))
 cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon
 endif
 cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1
+cflags-$(CONFIG_CPU_BMIPS)	+= -march=mips32 -Wa,-mips32 -Wa,--trap
 
 cflags-$(CONFIG_CPU_R4000_WORKAROUNDS)	+= $(call cc-option,-mfix-r4000,)
 cflags-$(CONFIG_CPU_R4400_WORKAROUNDS)	+= $(call cc-option,-mfix-r4400,)

arch/mips/alchemy/Kconfig

@@ -2,6 +2,10 @@
 config ALCHEMY_GPIOINT_AU1000
 	bool
 
+# au1300-style GPIO/INT controller
+config ALCHEMY_GPIOINT_AU1300
+	bool
+
 # select this in your board config if you don't want to use the gpio
 # namespace as documented in the manuals.  In this case however you need
 # to create the necessary gpio_* functions in your board code/headers!
@@ -22,43 +26,29 @@ config MIPS_MTX1
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
-config MIPS_BOSPORUS
-	bool "Alchemy Bosporus board"
-	select ALCHEMY_GPIOINT_AU1000
-	select DMA_NONCOHERENT
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_HAS_EARLY_PRINTK
-
 config MIPS_DB1000
-	bool "Alchemy DB1000 board"
+	bool "Alchemy DB1000/DB1500/DB1100 boards"
 	select ALCHEMY_GPIOINT_AU1000
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_HAS_EARLY_PRINTK
-
-config MIPS_DB1100
-	bool "Alchemy DB1100 board"
-	select ALCHEMY_GPIOINT_AU1000
-	select DMA_NONCOHERENT
+	select MIPS_DISABLE_OBSOLETE_IDE
+	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_DB1200
-	bool "Alchemy DB1200 board"
+	bool "Alchemy DB1200/PB1200 board"
 	select ALCHEMY_GPIOINT_AU1000
 	select DMA_COHERENT
 	select MIPS_DISABLE_OBSOLETE_IDE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
-config MIPS_DB1500
-	bool "Alchemy DB1500 board"
-	select ALCHEMY_GPIOINT_AU1000
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
+config MIPS_DB1300
+	bool "NetLogic DB1300 board"
+	select ALCHEMY_GPIOINT_AU1300
+	select DMA_COHERENT
 	select MIPS_DISABLE_OBSOLETE_IDE
-	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
@@ -66,27 +56,11 @@ config MIPS_DB1550
 	bool "Alchemy DB1550 board"
 	select ALCHEMY_GPIOINT_AU1000
 	select HW_HAS_PCI
-	select DMA_NONCOHERENT
+	select DMA_COHERENT
 	select MIPS_DISABLE_OBSOLETE_IDE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
-config MIPS_MIRAGE
-	bool "Alchemy Mirage board"
-	select DMA_NONCOHERENT
-	select ALCHEMY_GPIOINT_AU1000
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_HAS_EARLY_PRINTK
-
-config MIPS_PB1000
-	bool "Alchemy PB1000 board"
-	select ALCHEMY_GPIOINT_AU1000
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select SWAP_IO_SPACE
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_HAS_EARLY_PRINTK
-
 config MIPS_PB1100
 	bool "Alchemy PB1100 board"
 	select ALCHEMY_GPIOINT_AU1000
@@ -96,14 +70,6 @@ config MIPS_PB1100
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
-config MIPS_PB1200
-	bool "Alchemy PB1200 board"
-	select ALCHEMY_GPIOINT_AU1000
-	select DMA_NONCOHERENT
-	select MIPS_DISABLE_OBSOLETE_IDE
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_HAS_EARLY_PRINTK
-
 config MIPS_PB1500
 	bool "Alchemy PB1500 board"
 	select ALCHEMY_GPIOINT_AU1000

arch/mips/alchemy/Makefile

@@ -0,0 +1,3 @@
+obj-$(CONFIG_MIPS_GPR) += board-gpr.o
+obj-$(CONFIG_MIPS_MTX1) += board-mtx1.o
+obj-$(CONFIG_MIPS_XXS1500) += board-xxs1500.o

arch/mips/alchemy/Platform

@@ -4,62 +4,31 @@
 platform-$(CONFIG_MIPS_ALCHEMY)	+= alchemy/common/
 
 
-#
-# AMD Alchemy Pb1000 eval board
-#
-platform-$(CONFIG_MIPS_PB1000)	+= alchemy/devboards/
-cflags-$(CONFIG_MIPS_PB1000)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
-load-$(CONFIG_MIPS_PB1000)	+= 0xffffffff80100000
-
 #
 # AMD Alchemy Pb1100 eval board
 #
 platform-$(CONFIG_MIPS_PB1100)	+= alchemy/devboards/
-cflags-$(CONFIG_MIPS_PB1100)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
 load-$(CONFIG_MIPS_PB1100)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Pb1500 eval board
 #
 platform-$(CONFIG_MIPS_PB1500)	+= alchemy/devboards/
-cflags-$(CONFIG_MIPS_PB1500)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
 load-$(CONFIG_MIPS_PB1500)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Pb1550 eval board
 #
 platform-$(CONFIG_MIPS_PB1550)	+= alchemy/devboards/
-cflags-$(CONFIG_MIPS_PB1550)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
 load-$(CONFIG_MIPS_PB1550)	+= 0xffffffff80100000
 
 #
-# AMD Alchemy Pb1200 eval board
-#
-platform-$(CONFIG_MIPS_PB1200)	+= alchemy/devboards/
-cflags-$(CONFIG_MIPS_PB1200)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
-load-$(CONFIG_MIPS_PB1200)	+= 0xffffffff80100000
-
-#
-# AMD Alchemy Db1000 eval board
+# AMD Alchemy Db1000/Db1500/Db1100 eval boards
 #
 platform-$(CONFIG_MIPS_DB1000)	+= alchemy/devboards/
 cflags-$(CONFIG_MIPS_DB1000)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
 load-$(CONFIG_MIPS_DB1000)	+= 0xffffffff80100000
 
-#
-# AMD Alchemy Db1100 eval board
-#
-platform-$(CONFIG_MIPS_DB1100)	+= alchemy/devboards/
-cflags-$(CONFIG_MIPS_DB1100)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
-load-$(CONFIG_MIPS_DB1100)	+= 0xffffffff80100000
-
-#
-# AMD Alchemy Db1500 eval board
-#
-platform-$(CONFIG_MIPS_DB1500)	+= alchemy/devboards/
-cflags-$(CONFIG_MIPS_DB1500)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
-load-$(CONFIG_MIPS_DB1500)	+= 0xffffffff80100000
-
 #
 # AMD Alchemy Db1550 eval board
 #
@@ -68,42 +37,35 @@ cflags-$(CONFIG_MIPS_DB1550)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
 load-$(CONFIG_MIPS_DB1550)	+= 0xffffffff80100000
 
 #
-# AMD Alchemy Db1200 eval board
+# AMD Alchemy Db1200/Pb1200 eval boards
 #
 platform-$(CONFIG_MIPS_DB1200)	+= alchemy/devboards/
 cflags-$(CONFIG_MIPS_DB1200)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
 load-$(CONFIG_MIPS_DB1200)	+= 0xffffffff80100000
 
 #
-# AMD Alchemy Bosporus eval board
-#
-platform-$(CONFIG_MIPS_BOSPORUS) += alchemy/devboards/
-cflags-$(CONFIG_MIPS_BOSPORUS)	 += -I$(srctree)/arch/mips/include/asm/mach-db1x00
-load-$(CONFIG_MIPS_BOSPORUS)	 += 0xffffffff80100000
-
-#
-# AMD Alchemy Mirage eval board
+# NetLogic DBAu1300 development platform
 #
-platform-$(CONFIG_MIPS_MIRAGE)	+= alchemy/devboards/
-cflags-$(CONFIG_MIPS_MIRAGE)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
-load-$(CONFIG_MIPS_MIRAGE)	+= 0xffffffff80100000
+platform-$(CONFIG_MIPS_DB1300)	+= alchemy/devboards/
+cflags-$(CONFIG_MIPS_DB1300)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
+load-$(CONFIG_MIPS_DB1300)	+= 0xffffffff80100000
 
 #
-# 4G-Systems eval board
+# 4G-Systems MTX-1 "MeshCube" wireless router
 #
-platform-$(CONFIG_MIPS_MTX1)	+= alchemy/mtx-1/
+platform-$(CONFIG_MIPS_MTX1)	+= alchemy/
 load-$(CONFIG_MIPS_MTX1)	+= 0xffffffff80100000
 
 #
 # MyCable eval board
 #
-platform-$(CONFIG_MIPS_XXS1500)	+= alchemy/xxs1500/
+platform-$(CONFIG_MIPS_XXS1500)	+= alchemy/
 load-$(CONFIG_MIPS_XXS1500)	+= 0xffffffff80100000
 
 #
 # Trapeze ITS GRP board
 #
-platform-$(CONFIG_MIPS_GPR)	+= alchemy/gpr/
+platform-$(CONFIG_MIPS_GPR)	+= alchemy/
 load-$(CONFIG_MIPS_GPR)		+= 0xffffffff80100000
 
 # boards can specify their own <gpio.h> in one of their include dirs.

arch/mips/alchemy/gpr/platform.c → arch/mips/alchemy/board-gpr.c

@@ -1,5 +1,5 @@
 /*
- * GPR board platform device registration
+ * GPR board platform device registration (Au1550)
  *
  * Copyright (C) 2010 Wolfgang Grandegger <wg@denx.de>
  *
@@ -18,16 +18,89 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/leds.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
-
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
 #include <asm/mach-au1x00/au1000.h>
+#include <prom.h>
+
+const char *get_system_type(void)
+{
+	return "GPR";
+}
+
+void __init prom_init(void)
+{
+	unsigned char *memsize_str;
+	unsigned long memsize;
+
+	prom_argc = fw_arg0;
+	prom_argv = (char **)fw_arg1;
+	prom_envp = (char **)fw_arg2;
+
+	prom_init_cmdline();
+
+	memsize_str = prom_getenv("memsize");
+	if (!memsize_str)
+		memsize = 0x04000000;
+	else
+		strict_strtoul(memsize_str, 0, &memsize);
+	add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
+
+void prom_putchar(unsigned char c)
+{
+	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
+}
+
+static void gpr_reset(char *c)
+{
+	/* switch System-LED to orange (red# and green# on) */
+	alchemy_gpio_direction_output(4, 0);
+	alchemy_gpio_direction_output(5, 0);
+
+	/* trigger watchdog to reset board in 200ms */
+	printk(KERN_EMERG "Triggering watchdog soft reset...\n");
+	raw_local_irq_disable();
+	alchemy_gpio_direction_output(1, 0);
+	udelay(1);
+	alchemy_gpio_set_value(1, 1);
+	while (1)
+		cpu_wait();
+}
+
+static void gpr_power_off(void)
+{
+	while (1)
+		cpu_wait();
+}
+
+void __init board_setup(void)
+{
+	printk(KERN_INFO "Trapeze ITS GPR board\n");
+
+	pm_power_off = gpr_power_off;
+	_machine_halt = gpr_power_off;
+	_machine_restart = gpr_reset;
+
+	/* Enable UART1/3 */
+	alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
+	alchemy_uart_enable(AU1000_UART1_PHYS_ADDR);
+
+	/* Take away Reset of UMTS-card */
+	alchemy_gpio_direction_output(215, 1);
+}
 
 /*
  * Watchdog
@@ -152,7 +225,7 @@ static struct i2c_gpio_platform_data gpr_i2c_data = {
 	.scl_is_open_drain	= 1,
 	.udelay			= 2,		/* ~100 kHz */
 	.timeout		= HZ,
- };
+};
 
 static struct platform_device gpr_i2c_device = {
 	.name			= "i2c-gpio",
@@ -184,7 +257,7 @@ static int gpr_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
 	else if ((slot == 0) && (pin == 2))
 		return AU1550_PCI_INTB;
 
-	return -1;
+	return 0xff;
 }
 
 static struct alchemy_pci_platdata gpr_pci_pd = {

arch/mips/alchemy/mtx-1/platform.c → arch/mips/alchemy/board-mtx1.c

@@ -1,5 +1,5 @@
 /*
- * MTX-1 platform devices registration
+ * MTX-1 platform devices registration (Au1500)
  *
  * Copyright (C) 2007-2009, Florian Fainelli <florian@openwrt.org>
  *
@@ -19,6 +19,8 @@
  */
 
 #include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 #include <linux/gpio.h>
@@ -27,8 +29,85 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <mtd/mtd-abi.h>
-
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_eth.h>
+#include <prom.h>
+
+const char *get_system_type(void)
+{
+	return "MTX-1";
+}
+
+void __init prom_init(void)
+{
+	unsigned char *memsize_str;
+	unsigned long memsize;
+
+	prom_argc = fw_arg0;
+	prom_argv = (char **)fw_arg1;
+	prom_envp = (char **)fw_arg2;
+
+	prom_init_cmdline();
+
+	memsize_str = prom_getenv("memsize");
+	if (!memsize_str)
+		memsize = 0x04000000;
+	else
+		strict_strtoul(memsize_str, 0, &memsize);
+	add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
+
+void prom_putchar(unsigned char c)
+{
+	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
+}
+
+static void mtx1_reset(char *c)
+{
+	/* Jump to the reset vector */
+	__asm__ __volatile__("jr\t%0" : : "r"(0xbfc00000));
+}
+
+static void mtx1_power_off(void)
+{
+	while (1)
+		asm volatile (
+		"	.set	mips32					\n"
+		"	wait						\n"
+		"	.set	mips0					\n");
+}
+
+void __init board_setup(void)
+{
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	/* Enable USB power switch */
+	alchemy_gpio_direction_output(204, 0);
+#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
+
+	/* Initialize sys_pinfunc */
+	au_writel(SYS_PF_NI2, SYS_PINFUNC);
+
+	/* Initialize GPIO */
+	au_writel(~0, KSEG1ADDR(AU1000_SYS_PHYS_ADDR) + SYS_TRIOUTCLR);
+	alchemy_gpio_direction_output(0, 0);	/* Disable M66EN (PCI 66MHz) */
+	alchemy_gpio_direction_output(3, 1);	/* Disable PCI CLKRUN# */
+	alchemy_gpio_direction_output(1, 1);	/* Enable EXT_IO3 */
+	alchemy_gpio_direction_output(5, 0);	/* Disable eth PHY TX_ER */
+
+	/* Enable LED and set it to green */
+	alchemy_gpio_direction_output(211, 1);	/* green on */
+	alchemy_gpio_direction_output(212, 0);	/* red off */
+
+	pm_power_off = mtx1_power_off;
+	_machine_halt = mtx1_power_off;
+	_machine_restart = mtx1_reset;
+
+	printk(KERN_INFO "4G Systems MTX-1 Board\n");
+}
+
+/******************************************************************************/
 
 static struct gpio_keys_button mtx1_gpio_button[] = {
 	{
@@ -195,7 +274,6 @@ static struct platform_device mtx1_pci_host = {
 	.resource	= alchemy_pci_host_res,
 };
 
-
 static struct __initdata platform_device * mtx1_devs[] = {
 	&mtx1_pci_host,
 	&mtx1_gpio_leds,
@@ -206,13 +284,19 @@ static struct __initdata platform_device * mtx1_devs[] = {
 
 static struct au1000_eth_platform_data mtx1_au1000_eth0_pdata = {
 	.phy_search_highest_addr	= 1,
-	.phy1_search_mac0 		= 1,
+	.phy1_search_mac0		= 1,
 };
 
 static int __init mtx1_register_devices(void)
 {
 	int rc;
 
+	irq_set_irq_type(AU1500_GPIO204_INT, IRQ_TYPE_LEVEL_HIGH);
+	irq_set_irq_type(AU1500_GPIO201_INT, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(AU1500_GPIO202_INT, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(AU1500_GPIO203_INT, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(AU1500_GPIO205_INT, IRQ_TYPE_LEVEL_LOW);
+
 	au1xxx_override_eth_cfg(0, &mtx1_au1000_eth0_pdata);
 
 	rc = gpio_request(mtx1_gpio_button[0].gpio,
@@ -226,5 +310,4 @@ static int __init mtx1_register_devices(void)
 out:
 	return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs));
 }
-
 arch_initcall(mtx1_register_devices);

arch/mips/alchemy/board-xxs1500.c

@@ -0,0 +1,154 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	MyCable XXS1500 board support
+ *
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <prom.h>
+
+const char *get_system_type(void)
+{
+	return "XXS1500";
+}
+
+void __init prom_init(void)
+{
+	unsigned char *memsize_str;
+	unsigned long memsize;
+
+	prom_argc = fw_arg0;
+	prom_argv = (char **)fw_arg1;
+	prom_envp = (char **)fw_arg2;
+
+	prom_init_cmdline();
+
+	memsize_str = prom_getenv("memsize");
+	if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize))
+		memsize = 0x04000000;
+
+	add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
+
+void prom_putchar(unsigned char c)
+{
+	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
+}
+
+static void xxs1500_reset(char *c)
+{
+	/* Jump to the reset vector */
+	__asm__ __volatile__("jr\t%0" : : "r"(0xbfc00000));
+}
+
+static void xxs1500_power_off(void)
+{
+	while (1)
+		asm volatile (
+		"	.set	mips32					\n"
+		"	wait						\n"
+		"	.set	mips0					\n");
+}
+
+void __init board_setup(void)
+{
+	u32 pin_func;
+
+	pm_power_off = xxs1500_power_off;
+	_machine_halt = xxs1500_power_off;
+	_machine_restart = xxs1500_reset;
+
+	alchemy_gpio1_input_enable();
+	alchemy_gpio2_enable();
+
+	/* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */
+	pin_func  = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
+	pin_func |= SYS_PF_UR3;
+	au_writel(pin_func, SYS_PINFUNC);
+
+	/* Enable UART */
+	alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
+	/* Enable DTR (MCR bit 0) = USB power up */
+	__raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18));
+	wmb();
+}
+
+/******************************************************************************/
+
+static struct resource xxs1500_pcmcia_res[] = {
+	{
+		.name	= "pcmcia-io",
+		.flags	= IORESOURCE_MEM,
+		.start	= AU1000_PCMCIA_IO_PHYS_ADDR,
+		.end	= AU1000_PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1,
+	},
+	{
+		.name	= "pcmcia-attr",
+		.flags	= IORESOURCE_MEM,
+		.start	= AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		.end	= AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+	},
+	{
+		.name	= "pcmcia-mem",
+		.flags	= IORESOURCE_MEM,
+		.start	= AU1000_PCMCIA_MEM_PHYS_ADDR,
+		.end	= AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+	},
+};
+
+static struct platform_device xxs1500_pcmcia_dev = {
+	.name		= "xxs1500_pcmcia",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(xxs1500_pcmcia_res),
+	.resource	= xxs1500_pcmcia_res,
+};
+
+static struct platform_device *xxs1500_devs[] __initdata = {
+	&xxs1500_pcmcia_dev,
+};
+
+static int __init xxs1500_dev_init(void)
+{
+	irq_set_irq_type(AU1500_GPIO204_INT, IRQ_TYPE_LEVEL_HIGH);
+	irq_set_irq_type(AU1500_GPIO201_INT, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(AU1500_GPIO202_INT, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(AU1500_GPIO203_INT, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(AU1500_GPIO205_INT, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(AU1500_GPIO207_INT, IRQ_TYPE_LEVEL_LOW);
+
+	irq_set_irq_type(AU1500_GPIO0_INT, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(AU1500_GPIO1_INT, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(AU1500_GPIO2_INT, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(AU1500_GPIO3_INT, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(AU1500_GPIO4_INT, IRQ_TYPE_LEVEL_LOW); /* CF irq */
+	irq_set_irq_type(AU1500_GPIO5_INT, IRQ_TYPE_LEVEL_LOW);
+
+	return platform_add_devices(xxs1500_devs,
+				    ARRAY_SIZE(xxs1500_devs));
+}
+device_initcall(xxs1500_dev_init);

arch/mips/alchemy/common/Makefile

@@ -6,9 +6,7 @@
 #
 
 obj-y += prom.o time.o clocks.o platform.o power.o setup.o \
-	sleeper.o dma.o dbdma.o
-
-obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += irq.o
+	sleeper.o dma.o dbdma.o vss.o irq.o
 
 # optional gpiolib support
 ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),)

arch/mips/alchemy/common/dbdma.c

@@ -148,6 +148,50 @@ static dbdev_tab_t au1200_dbdev_tab[] __initdata = {
 	{ DSCR_CMD0_ALWAYS,   DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
 };
 
+static dbdev_tab_t au1300_dbdev_tab[] __initdata = {
+	{ AU1300_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8,  0x10100004, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN,  0, 8,  0x10100000, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8,  0x10101004, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART1_RX, DEV_FLAGS_IN,  0, 8,  0x10101000, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART2_TX, DEV_FLAGS_OUT, 0, 8,  0x10102004, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART2_RX, DEV_FLAGS_IN,  0, 8,  0x10102000, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8,  0x10103004, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART3_RX, DEV_FLAGS_IN,  0, 8,  0x10103000, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8,  0x10600000, 0, 0 },
+	{ AU1300_DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN,  4, 8,  0x10600004, 0, 0 },
+	{ AU1300_DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 8, 8,  0x10601000, 0, 0 },
+	{ AU1300_DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN,  8, 8,  0x10601004, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_AES_RX, DEV_FLAGS_IN ,   4, 32, 0x10300008, 0, 0 },
+	{ AU1300_DSCR_CMD0_AES_TX, DEV_FLAGS_OUT,   4, 32, 0x10300004, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT,  0, 16, 0x10a0001c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN,   0, 16, 0x10a0001c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT,  0, 16, 0x10a0101c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN,   0, 16, 0x10a0101c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT,  0, 16, 0x10a0201c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN,   0, 16, 0x10a0201c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT,  0, 16, 0x10a0301c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN,   0, 16, 0x10a0301c, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE,   0, 0,  0x00000000, 0, 0 },
+	{ AU1300_DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_SDMS_TX2, DEV_FLAGS_OUT, 4, 8,  0x10602000, 0, 0 },
+	{ AU1300_DSCR_CMD0_SDMS_RX2, DEV_FLAGS_IN,  4, 8,  0x10602004, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_UDMA, DEV_FLAGS_ANYUSE,  0, 32, 0x14001810, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
+	{ AU1300_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
+
+	{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+	{ DSCR_CMD0_ALWAYS,   DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+};
+
 /* 32 predefined plus 32 custom */
 #define DBDEV_TAB_SIZE		64
 
@@ -1019,8 +1063,7 @@ static int __init dbdma_setup(unsigned int irq, dbdev_tab_t *idtable)
 	dbdma_gptr->ddma_inten = 0xffff;
 	au_sync();
 
-	ret = request_irq(irq, dbdma_interrupt, IRQF_DISABLED, "dbdma",
-			  (void *)dbdma_gptr);
+	ret = request_irq(irq, dbdma_interrupt, 0, "dbdma", (void *)dbdma_gptr);
 	if (ret)
 		printk(KERN_ERR "Cannot grab DBDMA interrupt!\n");
 	else {
@@ -1038,6 +1081,8 @@ static int __init alchemy_dbdma_init(void)
 		return dbdma_setup(AU1550_DDMA_INT, au1550_dbdev_tab);
 	case ALCHEMY_CPU_AU1200:
 		return dbdma_setup(AU1200_DDMA_INT, au1200_dbdev_tab);
+	case ALCHEMY_CPU_AU1300:
+		return dbdma_setup(AU1300_DDMA_INT, au1300_dbdev_tab);
 	}
 	return 0;
 }

arch/mips/alchemy/common/gpiolib.c

@@ -27,6 +27,7 @@
  *	 CONFIG_ALCHEMY_GPIO_INDIRECT=n, otherwise compilation will fail!
  *	au1000 SoC have only one GPIO block : GPIO1
  *	Au1100, Au15x0, Au12x0 have a second one : GPIO2
+ *	Au1300 is totally different: 1 block with up to 128 GPIOs
  */
 
 #include <linux/init.h>
@@ -35,6 +36,7 @@
 #include <linux/types.h>
 #include <linux/gpio.h>
 #include <asm/mach-au1x00/gpio-au1000.h>
+#include <asm/mach-au1x00/gpio-au1300.h>
 
 static int gpio2_get(struct gpio_chip *chip, unsigned offset)
 {
@@ -115,6 +117,43 @@ struct gpio_chip alchemy_gpio_chip[] = {
 	},
 };
 
+static int alchemy_gpic_get(struct gpio_chip *chip, unsigned int off)
+{
+	return au1300_gpio_get_value(off + AU1300_GPIO_BASE);
+}
+
+static void alchemy_gpic_set(struct gpio_chip *chip, unsigned int off, int v)
+{
+	au1300_gpio_set_value(off + AU1300_GPIO_BASE, v);
+}
+
+static int alchemy_gpic_dir_input(struct gpio_chip *chip, unsigned int off)
+{
+	return au1300_gpio_direction_input(off + AU1300_GPIO_BASE);
+}
+
+static int alchemy_gpic_dir_output(struct gpio_chip *chip, unsigned int off,
+				   int v)
+{
+	return au1300_gpio_direction_output(off + AU1300_GPIO_BASE, v);
+}
+
+static int alchemy_gpic_gpio_to_irq(struct gpio_chip *chip, unsigned int off)
+{
+	return au1300_gpio_to_irq(off + AU1300_GPIO_BASE);
+}
+
+static struct gpio_chip au1300_gpiochip = {
+	.label			= "alchemy-gpic",
+	.direction_input	= alchemy_gpic_dir_input,
+	.direction_output	= alchemy_gpic_dir_output,
+	.get			= alchemy_gpic_get,
+	.set			= alchemy_gpic_set,
+	.to_irq			= alchemy_gpic_gpio_to_irq,
+	.base			= AU1300_GPIO_BASE,
+	.ngpio			= AU1300_GPIO_NUM,
+};
+
 static int __init alchemy_gpiochip_init(void)
 {
 	int ret = 0;
@@ -127,6 +166,9 @@ static int __init alchemy_gpiochip_init(void)
 		ret = gpiochip_add(&alchemy_gpio_chip[0]);
 		ret |= gpiochip_add(&alchemy_gpio_chip[1]);
 		break;
+	case ALCHEMY_CPU_AU1300:
+		ret = gpiochip_add(&au1300_gpiochip);
+		break;
 	}
 	return ret;
 }

arch/mips/alchemy/common/irq.c

@@ -25,19 +25,15 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/bitops.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
 #include <linux/slab.h>
 #include <linux/syscore_ops.h>
 
 #include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
 #include <asm/mach-au1x00/au1000.h>
-#ifdef CONFIG_MIPS_PB1000
-#include <asm/mach-pb1x00/pb1000.h>
-#endif
+#include <asm/mach-au1x00/gpio-au1300.h>
 
 /* Interrupt Controller register offsets */
 #define IC_CFG0RD	0x40
@@ -69,7 +65,17 @@
 #define IC_FALLINGCLR	0x7C
 #define IC_TESTBIT	0x80
 
-static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type);
+/* per-processor fixed function irqs */
+struct alchemy_irqmap {
+	int irq;	/* linux IRQ number */
+	int type;	/* IRQ_TYPE_ */
+	int prio;	/* irq priority, 0 highest, 3 lowest */
+	int internal;	/* GPIC: internal source (no ext. pin)? */
+};
+
+static int au1x_ic_settype(struct irq_data *d, unsigned int type);
+static int au1300_gpic_settype(struct irq_data *d, unsigned int type);
+
 
 /* NOTE on interrupt priorities: The original writers of this code said:
  *
@@ -77,176 +83,207 @@ static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type);
  * the USB devices-side packet complete interrupt (USB_DEV_REQ_INT)
  * needs the highest priority.
  */
-
-/* per-processor fixed function irqs */
-struct au1xxx_irqmap {
-	int im_irq;
-	int im_type;
-	int im_request;		/* set 1 to get higher priority */
+struct alchemy_irqmap au1000_irqmap[] __initdata = {
+	{ AU1000_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_UART2_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1000_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  0, 0 },
+	{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1000_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1000_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ -1, },
 };
 
-struct au1xxx_irqmap au1000_irqmap[] __initdata = {
-	{ AU1000_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_UART2_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1000_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  1 },
-	{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1000_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1000_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+struct alchemy_irqmap au1500_irqmap[] __initdata = {
+	{ AU1500_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1500_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1500_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1500_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1500_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  0, 0 },
+	{ AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1500_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1500_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ -1, },
 };
 
-struct au1xxx_irqmap au1500_irqmap[] __initdata = {
-	{ AU1500_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1500_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1500_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1500_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1500_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  1 },
-	{ AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1500_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1500_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+struct alchemy_irqmap au1100_irqmap[] __initdata = {
+	{ AU1100_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1100_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  0, 0 },
+	{ AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1100_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1100_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
 	{ -1, },
 };
 
-struct au1xxx_irqmap au1100_irqmap[] __initdata = {
-	{ AU1100_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1100_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  1 },
-	{ AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1100_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1100_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+struct alchemy_irqmap au1550_irqmap[] __initdata = {
+	{ AU1550_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1550_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1550_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_CRYPTO_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1550_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1550_PCI_RST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1550_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_PSC2_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_PSC3_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1550_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  0, 0 },
+	{ AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   1, 0 },
+	{ AU1550_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1550_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 	{ -1, },
 };
 
-struct au1xxx_irqmap au1550_irqmap[] __initdata = {
-	{ AU1550_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1550_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1550_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_CRYPTO_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1550_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1550_PCI_RST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1550_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_PSC2_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_PSC3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1550_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  1 },
-	{ AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
-	{ AU1550_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1550_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+struct alchemy_irqmap au1200_irqmap[] __initdata = {
+	{ AU1200_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_SWT_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_MAE_BE_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_MAE_FE_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_AES_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_CAMERA_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1200_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_USB_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
+	{ AU1200_MAE_BOTH_INT,	  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 	{ -1, },
 };
 
-struct au1xxx_irqmap au1200_irqmap[] __initdata = {
-	{ AU1200_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_SWT_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_MAE_BE_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_MAE_FE_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_AES_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_CAMERA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1200_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_USB_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ AU1200_MAE_BOTH_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
-	{ -1, },
+static struct alchemy_irqmap au1300_irqmap[] __initdata = {
+	/* multifunction: gpio pin or device */
+	{ AU1300_UART1_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_UART2_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_UART3_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_SD1_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_SD2_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_PSC0_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_PSC1_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_PSC2_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_PSC3_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_NAND_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	/* au1300 internal */
+	{ AU1300_DDMA_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_MMU_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_MPU_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_GPU_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_UDMA_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_TOY_INT,	 IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_RTC_INT,	 IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING,	0, 1, },
+	{ AU1300_UART0_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_SD0_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_USB_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_LCD_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_BSA_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_MPE_INT,	 IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_ITE_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_AES_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_CIM_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ -1, },	/* terminator */
 };
 
+/******************************************************************************/
 
 static void au1x_ic0_unmask(struct irq_data *d)
 {
@@ -265,14 +302,6 @@ static void au1x_ic1_unmask(struct irq_data *d)
 
 	__raw_writel(1 << bit, base + IC_MASKSET);
 	__raw_writel(1 << bit, base + IC_WAKESET);
-
-/* very hacky. does the pb1000 cpld auto-disable this int?
- * nowhere in the current kernel sources is it disabled.	--mlau
- */
-#if defined(CONFIG_MIPS_PB1000)
-	if (d->irq == AU1000_GPIO15_INT)
-		__raw_writel(0x4000, (void __iomem *)PB1000_MDR); /* enable int */
-#endif
 	wmb();
 }
 
@@ -470,40 +499,219 @@ static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type)
 	return ret;
 }
 
-asmlinkage void plat_irq_dispatch(void)
+/******************************************************************************/
+
+/*
+ * au1300_gpic_chgcfg - change PIN configuration.
+ * @gpio:	pin to change (0-based GPIO number from datasheet).
+ * @clr:	clear all bits set in 'clr'.
+ * @set:	set these bits.
+ *
+ * modifies a pins' configuration register, bits set in @clr will
+ * be cleared in the register, bits in @set will be set.
+ */
+static inline void au1300_gpic_chgcfg(unsigned int gpio,
+				      unsigned long clr,
+				      unsigned long set)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long l;
+
+	r += gpio * 4;	/* offset into pin config array */
+	l = __raw_readl(r + AU1300_GPIC_PINCFG);
+	l &= ~clr;
+	l |= set;
+	__raw_writel(l, r + AU1300_GPIC_PINCFG);
+	wmb();
+}
+
+/*
+ * au1300_pinfunc_to_gpio - assign a pin as GPIO input (GPIO ctrl).
+ * @pin:	pin (0-based GPIO number from datasheet).
+ *
+ * Assigns a GPIO pin to the GPIO controller, so its level can either
+ * be read or set through the generic GPIO functions.
+ * If you need a GPOUT, use au1300_gpio_set_value(pin, 0/1).
+ * REVISIT: is this function really necessary?
+ */
+void au1300_pinfunc_to_gpio(enum au1300_multifunc_pins gpio)
+{
+	au1300_gpio_direction_input(gpio + AU1300_GPIO_BASE);
+}
+EXPORT_SYMBOL_GPL(au1300_pinfunc_to_gpio);
+
+/*
+ * au1300_pinfunc_to_dev - assign a pin to the device function.
+ * @pin:	pin (0-based GPIO number from datasheet).
+ *
+ * Assigns a GPIO pin to its associated device function; the pin will be
+ * driven by the device and not through GPIO functions.
+ */
+void au1300_pinfunc_to_dev(enum au1300_multifunc_pins gpio)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit;
+
+	r += GPIC_GPIO_BANKOFF(gpio);
+	bit = GPIC_GPIO_TO_BIT(gpio);
+	__raw_writel(bit, r + AU1300_GPIC_DEVSEL);
+	wmb();
+}
+EXPORT_SYMBOL_GPL(au1300_pinfunc_to_dev);
+
+/*
+ * au1300_set_irq_priority -  set internal priority of IRQ.
+ * @irq:	irq to set priority (linux irq number).
+ * @p:		priority (0 = highest, 3 = lowest).
+ */
+void au1300_set_irq_priority(unsigned int irq, int p)
 {
-	unsigned int pending = read_c0_status() & read_c0_cause();
-	unsigned long s, off;
-
-	if (pending & CAUSEF_IP7) {
-		off = MIPS_CPU_IRQ_BASE + 7;
-		goto handle;
-	} else if (pending & CAUSEF_IP2) {
-		s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ0INT;
-		off = AU1000_INTC0_INT_BASE;
-	} else if (pending & CAUSEF_IP3) {
-		s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ1INT;
-		off = AU1000_INTC0_INT_BASE;
-	} else if (pending & CAUSEF_IP4) {
-		s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ0INT;
-		off = AU1000_INTC1_INT_BASE;
-	} else if (pending & CAUSEF_IP5) {
-		s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ1INT;
-		off = AU1000_INTC1_INT_BASE;
-	} else
-		goto spurious;
-
-	s = __raw_readl((void __iomem *)s);
-	if (unlikely(!s)) {
-spurious:
-		spurious_interrupt();
-		return;
+	irq -= ALCHEMY_GPIC_INT_BASE;
+	au1300_gpic_chgcfg(irq, GPIC_CFG_IL_MASK, GPIC_CFG_IL_SET(p));
+}
+EXPORT_SYMBOL_GPL(au1300_set_irq_priority);
+
+/*
+ * au1300_set_dbdma_gpio - assign a gpio to one of the DBDMA triggers.
+ * @dchan:	dbdma trigger select (0, 1).
+ * @gpio:	pin to assign as trigger.
+ *
+ * DBDMA controller has 2 external trigger sources; this function
+ * assigns a GPIO to the selected trigger.
+ */
+void au1300_set_dbdma_gpio(int dchan, unsigned int gpio)
+{
+	unsigned long r;
+
+	if ((dchan >= 0) && (dchan <= 1)) {
+		r = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL);
+		r &= ~(0xff << (8 * dchan));
+		r |= (gpio & 0x7f) << (8 * dchan);
+		__raw_writel(r, AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL);
+		wmb();
 	}
-	off += __ffs(s);
-handle:
-	do_IRQ(off);
 }
 
+static inline void gpic_pin_set_idlewake(unsigned int gpio, int allow)
+{
+	au1300_gpic_chgcfg(gpio, GPIC_CFG_IDLEWAKE,
+			   allow ? GPIC_CFG_IDLEWAKE : 0);
+}
+
+static void au1300_gpic_mask(struct irq_data *d)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit, irq = d->irq;
+
+	irq -= ALCHEMY_GPIC_INT_BASE;
+	r += GPIC_GPIO_BANKOFF(irq);
+	bit = GPIC_GPIO_TO_BIT(irq);
+	__raw_writel(bit, r + AU1300_GPIC_IDIS);
+	wmb();
+
+	gpic_pin_set_idlewake(irq, 0);
+}
+
+static void au1300_gpic_unmask(struct irq_data *d)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit, irq = d->irq;
+
+	irq -= ALCHEMY_GPIC_INT_BASE;
+
+	gpic_pin_set_idlewake(irq, 1);
+
+	r += GPIC_GPIO_BANKOFF(irq);
+	bit = GPIC_GPIO_TO_BIT(irq);
+	__raw_writel(bit, r + AU1300_GPIC_IEN);
+	wmb();
+}
+
+static void au1300_gpic_maskack(struct irq_data *d)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit, irq = d->irq;
+
+	irq -= ALCHEMY_GPIC_INT_BASE;
+	r += GPIC_GPIO_BANKOFF(irq);
+	bit = GPIC_GPIO_TO_BIT(irq);
+	__raw_writel(bit, r + AU1300_GPIC_IPEND);	/* ack */
+	__raw_writel(bit, r + AU1300_GPIC_IDIS);	/* mask */
+	wmb();
+
+	gpic_pin_set_idlewake(irq, 0);
+}
+
+static void au1300_gpic_ack(struct irq_data *d)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit, irq = d->irq;
+
+	irq -= ALCHEMY_GPIC_INT_BASE;
+	r += GPIC_GPIO_BANKOFF(irq);
+	bit = GPIC_GPIO_TO_BIT(irq);
+	__raw_writel(bit, r + AU1300_GPIC_IPEND);	/* ack */
+	wmb();
+}
+
+static struct irq_chip au1300_gpic = {
+	.name		= "GPIOINT",
+	.irq_ack	= au1300_gpic_ack,
+	.irq_mask	= au1300_gpic_mask,
+	.irq_mask_ack	= au1300_gpic_maskack,
+	.irq_unmask	= au1300_gpic_unmask,
+	.irq_set_type	= au1300_gpic_settype,
+};
+
+static int au1300_gpic_settype(struct irq_data *d, unsigned int type)
+{
+	unsigned long s;
+	unsigned char *name = NULL;
+	irq_flow_handler_t hdl = NULL;
+
+	switch (type) {
+	case IRQ_TYPE_LEVEL_HIGH:
+		s = GPIC_CFG_IC_LEVEL_HIGH;
+		name = "high";
+		hdl = handle_level_irq;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		s = GPIC_CFG_IC_LEVEL_LOW;
+		name = "low";
+		hdl = handle_level_irq;
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		s = GPIC_CFG_IC_EDGE_RISE;
+		name = "posedge";
+		hdl = handle_edge_irq;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		s = GPIC_CFG_IC_EDGE_FALL;
+		name = "negedge";
+		hdl = handle_edge_irq;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		s = GPIC_CFG_IC_EDGE_BOTH;
+		name = "bothedge";
+		hdl = handle_edge_irq;
+		break;
+	case IRQ_TYPE_NONE:
+		s = GPIC_CFG_IC_OFF;
+		name = "disabled";
+		hdl = handle_level_irq;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	__irq_set_chip_handler_name_locked(d->irq, &au1300_gpic, hdl, name);
+
+	au1300_gpic_chgcfg(d->irq - ALCHEMY_GPIC_INT_BASE, GPIC_CFG_IC_MASK, s);
+
+	return 0;
+}
+
+/******************************************************************************/
 
 static inline void ic_init(void __iomem *base)
 {
@@ -521,13 +729,159 @@ static inline void ic_init(void __iomem *base)
 	wmb();
 }
 
-static void __init au1000_init_irq(struct au1xxx_irqmap *map)
+static unsigned long alchemy_gpic_pmdata[ALCHEMY_GPIC_INT_NUM + 6];
+
+static inline void alchemy_ic_suspend_one(void __iomem *base, unsigned long *d)
+{
+	d[0] = __raw_readl(base + IC_CFG0RD);
+	d[1] = __raw_readl(base + IC_CFG1RD);
+	d[2] = __raw_readl(base + IC_CFG2RD);
+	d[3] = __raw_readl(base + IC_SRCRD);
+	d[4] = __raw_readl(base + IC_ASSIGNRD);
+	d[5] = __raw_readl(base + IC_WAKERD);
+	d[6] = __raw_readl(base + IC_MASKRD);
+	ic_init(base);		/* shut it up too while at it */
+}
+
+static inline void alchemy_ic_resume_one(void __iomem *base, unsigned long *d)
+{
+	ic_init(base);
+
+	__raw_writel(d[0], base + IC_CFG0SET);
+	__raw_writel(d[1], base + IC_CFG1SET);
+	__raw_writel(d[2], base + IC_CFG2SET);
+	__raw_writel(d[3], base + IC_SRCSET);
+	__raw_writel(d[4], base + IC_ASSIGNSET);
+	__raw_writel(d[5], base + IC_WAKESET);
+	wmb();
+
+	__raw_writel(d[6], base + IC_MASKSET);
+	wmb();
+}
+
+static int alchemy_ic_suspend(void)
+{
+	alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
+			       alchemy_gpic_pmdata);
+	alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
+			       &alchemy_gpic_pmdata[7]);
+	return 0;
+}
+
+static void alchemy_ic_resume(void)
+{
+	alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
+			      &alchemy_gpic_pmdata[7]);
+	alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
+			      alchemy_gpic_pmdata);
+}
+
+static int alchemy_gpic_suspend(void)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
+	int i;
+
+	/* save 4 interrupt mask status registers */
+	alchemy_gpic_pmdata[0] = __raw_readl(base + AU1300_GPIC_IEN + 0x0);
+	alchemy_gpic_pmdata[1] = __raw_readl(base + AU1300_GPIC_IEN + 0x4);
+	alchemy_gpic_pmdata[2] = __raw_readl(base + AU1300_GPIC_IEN + 0x8);
+	alchemy_gpic_pmdata[3] = __raw_readl(base + AU1300_GPIC_IEN + 0xc);
+
+	/* save misc register(s) */
+	alchemy_gpic_pmdata[4] = __raw_readl(base + AU1300_GPIC_DMASEL);
+
+	/* molto silenzioso */
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc);
+	wmb();
+
+	/* save pin/int-type configuration */
+	base += AU1300_GPIC_PINCFG;
+	for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++)
+		alchemy_gpic_pmdata[i + 5] = __raw_readl(base + (i << 2));
+
+	wmb();
+
+	return 0;
+}
+
+static void alchemy_gpic_resume(void)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
+	int i;
+
+	/* disable all first */
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc);
+	wmb();
+
+	/* restore pin/int-type configurations */
+	base += AU1300_GPIC_PINCFG;
+	for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++)
+		__raw_writel(alchemy_gpic_pmdata[i + 5], base + (i << 2));
+	wmb();
+
+	/* restore misc register(s) */
+	base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
+	__raw_writel(alchemy_gpic_pmdata[4], base + AU1300_GPIC_DMASEL);
+	wmb();
+
+	/* finally restore masks */
+	__raw_writel(alchemy_gpic_pmdata[0], base + AU1300_GPIC_IEN + 0x0);
+	__raw_writel(alchemy_gpic_pmdata[1], base + AU1300_GPIC_IEN + 0x4);
+	__raw_writel(alchemy_gpic_pmdata[2], base + AU1300_GPIC_IEN + 0x8);
+	__raw_writel(alchemy_gpic_pmdata[3], base + AU1300_GPIC_IEN + 0xc);
+	wmb();
+}
+
+static struct syscore_ops alchemy_ic_pmops = {
+	.suspend	= alchemy_ic_suspend,
+	.resume		= alchemy_ic_resume,
+};
+
+static struct syscore_ops alchemy_gpic_pmops = {
+	.suspend	= alchemy_gpic_suspend,
+	.resume		= alchemy_gpic_resume,
+};
+
+/******************************************************************************/
+
+/* create chained handlers for the 4 IC requests to the MIPS IRQ ctrl */
+#define DISP(name, base, addr)						      \
+static void au1000_##name##_dispatch(unsigned int irq, struct irq_desc *d)    \
+{									      \
+	unsigned long r = __raw_readl((void __iomem *)KSEG1ADDR(addr));	      \
+	if (likely(r))							      \
+		generic_handle_irq(base + __ffs(r));			      \
+	else								      \
+		spurious_interrupt();					      \
+}
+
+DISP(ic0r0, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ0INT)
+DISP(ic0r1, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ1INT)
+DISP(ic1r0, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ0INT)
+DISP(ic1r1, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ1INT)
+
+static void alchemy_gpic_dispatch(unsigned int irq, struct irq_desc *d)
+{
+	int i = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_PRIENC);
+	generic_handle_irq(ALCHEMY_GPIC_INT_BASE + i);
+}
+
+/******************************************************************************/
+
+static void __init au1000_init_irq(struct alchemy_irqmap *map)
 {
 	unsigned int bit, irq_nr;
 	void __iomem *base;
 
 	ic_init((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR));
 	ic_init((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR));
+	register_syscore_ops(&alchemy_ic_pmops);
 	mips_cpu_irq_init();
 
 	/* register all 64 possible IC0+IC1 irq sources as type "none".
@@ -544,8 +898,8 @@ static void __init au1000_init_irq(struct au1xxx_irqmap *map)
 	/*
 	 * Initialize IC0, which is fixed per processor.
 	 */
-	while (map->im_irq != -1) {
-		irq_nr = map->im_irq;
+	while (map->irq != -1) {
+		irq_nr = map->irq;
 
 		if (irq_nr >= AU1000_INTC1_INT_BASE) {
 			bit = irq_nr - AU1000_INTC1_INT_BASE;
@@ -554,16 +908,61 @@ static void __init au1000_init_irq(struct au1xxx_irqmap *map)
 			bit = irq_nr - AU1000_INTC0_INT_BASE;
 			base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
 		}
-		if (map->im_request)
+		if (map->prio == 0)
 			__raw_writel(1 << bit, base + IC_ASSIGNSET);
 
-		au1x_ic_settype(irq_get_irq_data(irq_nr), map->im_type);
+		au1x_ic_settype(irq_get_irq_data(irq_nr), map->type);
 		++map;
 	}
 
-	set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, au1000_ic0r0_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, au1000_ic0r1_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, au1000_ic1r0_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, au1000_ic1r1_dispatch);
+}
+
+static void __init alchemy_gpic_init_irq(const struct alchemy_irqmap *dints)
+{
+	int i;
+	void __iomem *bank_base;
+
+	register_syscore_ops(&alchemy_gpic_pmops);
+	mips_cpu_irq_init();
+
+	/* disable & ack all possible interrupt sources */
+	for (i = 0; i < 4; i++) {
+		bank_base = AU1300_GPIC_ADDR + (i * 4);
+		__raw_writel(~0UL, bank_base + AU1300_GPIC_IDIS);
+		wmb();
+		__raw_writel(~0UL, bank_base + AU1300_GPIC_IPEND);
+		wmb();
+	}
+
+	/* register an irq_chip for them, with 2nd highest priority */
+	for (i = ALCHEMY_GPIC_INT_BASE; i <= ALCHEMY_GPIC_INT_LAST; i++) {
+		au1300_set_irq_priority(i, 1);
+		au1300_gpic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE);
+	}
+
+	/* setup known on-chip sources */
+	while ((i = dints->irq) != -1) {
+		au1300_gpic_settype(irq_get_irq_data(i), dints->type);
+		au1300_set_irq_priority(i, dints->prio);
+
+		if (dints->internal)
+			au1300_pinfunc_to_dev(i - ALCHEMY_GPIC_INT_BASE);
+
+		dints++;
+	}
+
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, alchemy_gpic_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, alchemy_gpic_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, alchemy_gpic_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, alchemy_gpic_dispatch);
 }
 
+/******************************************************************************/
+
 void __init arch_init_irq(void)
 {
 	switch (alchemy_get_cputype()) {
@@ -582,65 +981,17 @@ void __init arch_init_irq(void)
 	case ALCHEMY_CPU_AU1200:
 		au1000_init_irq(au1200_irqmap);
 		break;
+	case ALCHEMY_CPU_AU1300:
+		alchemy_gpic_init_irq(au1300_irqmap);
+		break;
+	default:
+		pr_err("unknown Alchemy IRQ core\n");
+		break;
 	}
 }
 
-
-static unsigned long alchemy_ic_pmdata[7 * 2];
-
-static inline void alchemy_ic_suspend_one(void __iomem *base, unsigned long *d)
-{
-	d[0] = __raw_readl(base + IC_CFG0RD);
-	d[1] = __raw_readl(base + IC_CFG1RD);
-	d[2] = __raw_readl(base + IC_CFG2RD);
-	d[3] = __raw_readl(base + IC_SRCRD);
-	d[4] = __raw_readl(base + IC_ASSIGNRD);
-	d[5] = __raw_readl(base + IC_WAKERD);
-	d[6] = __raw_readl(base + IC_MASKRD);
-	ic_init(base);		/* shut it up too while at it */
-}
-
-static inline void alchemy_ic_resume_one(void __iomem *base, unsigned long *d)
-{
-	ic_init(base);
-
-	__raw_writel(d[0], base + IC_CFG0SET);
-	__raw_writel(d[1], base + IC_CFG1SET);
-	__raw_writel(d[2], base + IC_CFG2SET);
-	__raw_writel(d[3], base + IC_SRCSET);
-	__raw_writel(d[4], base + IC_ASSIGNSET);
-	__raw_writel(d[5], base + IC_WAKESET);
-	wmb();
-
-	__raw_writel(d[6], base + IC_MASKSET);
-	wmb();
-}
-
-static int alchemy_ic_suspend(void)
-{
-	alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
-			       alchemy_ic_pmdata);
-	alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
-			       &alchemy_ic_pmdata[7]);
-	return 0;
-}
-
-static void alchemy_ic_resume(void)
-{
-	alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
-			      &alchemy_ic_pmdata[7]);
-	alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
-			      alchemy_ic_pmdata);
-}
-
-static struct syscore_ops alchemy_ic_syscore_ops = {
-	.suspend	= alchemy_ic_suspend,
-	.resume		= alchemy_ic_resume,
-};
-
-static int __init alchemy_ic_pm_init(void)
+asmlinkage void plat_irq_dispatch(void)
 {
-	register_syscore_ops(&alchemy_ic_syscore_ops);
-	return 0;
+	unsigned long r = (read_c0_status() & read_c0_cause()) >> 8;
+	do_IRQ(MIPS_CPU_IRQ_BASE + __ffs(r & 0xff));
 }
-device_initcall(alchemy_ic_pm_init);

arch/mips/alchemy/common/platform.c

@@ -82,6 +82,12 @@ static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = {
 		PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT),
 		PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT),
 	},
+	[ALCHEMY_CPU_AU1300] = {
+		PORT(AU1300_UART0_PHYS_ADDR, AU1300_UART0_INT),
+		PORT(AU1300_UART1_PHYS_ADDR, AU1300_UART1_INT),
+		PORT(AU1300_UART2_PHYS_ADDR, AU1300_UART2_INT),
+		PORT(AU1300_UART3_PHYS_ADDR, AU1300_UART3_INT),
+	},
 };
 
 static struct platform_device au1xx0_uart_device = {
@@ -122,10 +128,12 @@ static unsigned long alchemy_ohci_data[][2] __initdata = {
 	[ALCHEMY_CPU_AU1100] = { AU1000_USB_OHCI_PHYS_ADDR, AU1100_USB_HOST_INT },
 	[ALCHEMY_CPU_AU1550] = { AU1550_USB_OHCI_PHYS_ADDR, AU1550_USB_HOST_INT },
 	[ALCHEMY_CPU_AU1200] = { AU1200_USB_OHCI_PHYS_ADDR, AU1200_USB_INT },
+	[ALCHEMY_CPU_AU1300] = { AU1300_USB_OHCI0_PHYS_ADDR, AU1300_USB_INT },
 };
 
 static unsigned long alchemy_ehci_data[][2] __initdata = {
 	[ALCHEMY_CPU_AU1200] = { AU1200_USB_EHCI_PHYS_ADDR, AU1200_USB_INT },
+	[ALCHEMY_CPU_AU1300] = { AU1300_USB_EHCI_PHYS_ADDR, AU1300_USB_INT },
 };
 
 static int __init _new_usbres(struct resource **r, struct platform_device **d)
@@ -169,8 +177,8 @@ static void __init alchemy_setup_usb(int ctype)
 		printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n");
 
 
-	/* setup EHCI0: Au1200 */
-	if (ctype == ALCHEMY_CPU_AU1200) {
+	/* setup EHCI0: Au1200/Au1300 */
+	if ((ctype == ALCHEMY_CPU_AU1200) || (ctype == ALCHEMY_CPU_AU1300)) {
 		if (_new_usbres(&res, &pdev))
 			return;
 
@@ -187,6 +195,25 @@ static void __init alchemy_setup_usb(int ctype)
 		if (platform_device_register(pdev))
 			printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n");
 	}
+
+	/* Au1300: OHCI1 */
+	if (ctype == ALCHEMY_CPU_AU1300) {
+		if (_new_usbres(&res, &pdev))
+			return;
+
+		res[0].start = AU1300_USB_OHCI1_PHYS_ADDR;
+		res[0].end = res[0].start + 0x100 - 1;
+		res[0].flags = IORESOURCE_MEM;
+		res[1].start = AU1300_USB_INT;
+		res[1].end = res[1].start;
+		res[1].flags = IORESOURCE_IRQ;
+		pdev->name = "au1xxx-ohci";
+		pdev->id = 1;
+		pdev->dev.dma_mask = &alchemy_ohci_dmamask;
+
+		if (platform_device_register(pdev))
+			printk(KERN_INFO "Alchemy USB: cannot add OHCI1\n");
+	}
 }
 
 /* Macro to help defining the Ethernet MAC resources */

arch/mips/alchemy/common/power.c

@@ -126,6 +126,9 @@ void au_sleep(void)
 	case ALCHEMY_CPU_AU1200:
 		alchemy_sleep_au1550();
 		break;
+	case ALCHEMY_CPU_AU1300:
+		alchemy_sleep_au1300();
+		break;
 	}
 
 	restore_core_regs();

arch/mips/alchemy/common/sleeper.S

@@ -153,6 +153,79 @@ LEAF(alchemy_sleep_au1550)
 
 END(alchemy_sleep_au1550)
 
+/* sleepcode for Au1300 memory controller type */
+LEAF(alchemy_sleep_au1300)
+
+	SETUP_SLEEP
+
+	/* cache following instructions, as memory gets put to sleep */
+	la	t0, 2f
+	la	t1, 4f
+	subu	t2, t1, t0
+
+	.set	mips3
+
+1:	cache	0x14, 0(t0)
+	subu	t2, t2, 32
+	bgez	t2, 1b
+	 addu	t0, t0, 32
+
+	.set	mips0
+
+2:	lui	a0, 0xb400		/* mem_xxx */
+
+	/* disable all ports in mem_sdportcfga */
+	sw	zero, 0x868(a0)		/* mem_sdportcfga */
+	sync
+
+	/* disable ODT */
+	li	t0, 0x03010000
+	sw	t0, 0x08d8(a0)		/* mem_sdcmd0 */
+	sw	t0, 0x08dc(a0)		/* mem_sdcmd1 */
+	sync
+
+	/* precharge */
+	li	t0, 0x23000400
+	sw	t0, 0x08dc(a0)		/* mem_sdcmd1 */
+	sw	t0, 0x08d8(a0)		/* mem_sdcmd0 */
+	sync
+
+	/* auto refresh */
+	sw	zero, 0x08c8(a0)	/* mem_sdautoref */
+	sync
+
+	/* block access to the DDR */
+	lw	t0, 0x0848(a0)		/* mem_sdconfigb */
+	li	t1, (1 << 7 | 0x3F)
+	or	t0, t0, t1
+	sw	t0, 0x0848(a0)		/* mem_sdconfigb */
+	sync
+
+	/* issue the Self Refresh command */
+	li	t0, 0x10000000
+	sw	t0, 0x08dc(a0)		/* mem_sdcmd1 */
+	sw	t0, 0x08d8(a0)		/* mem_sdcmd0 */
+	sync
+
+	/* wait for sdram to enter self-refresh mode */
+	lui	t0, 0x0300
+3:	lw	t1, 0x0850(a0)		/* mem_sdstat */
+	and	t2, t1, t0
+	bne	t2, t0, 3b
+	 nop
+
+	/* disable SDRAM clocks */
+	li	t0, ~(3<<28)
+	lw	t1, 0x0840(a0)		/* mem_sdconfiga */
+	and	t1, t1, t0		/* clear CE[1:0] */
+	sw	t1, 0x0840(a0)		/* mem_sdconfiga */
+	sync
+
+	DO_SLEEP
+4:
+
+END(alchemy_sleep_au1300)
+
 
 	/* This is where we return upon wakeup.
 	 * Reload all of the registers and return.

arch/mips/alchemy/common/time.c

@@ -92,7 +92,7 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = {
 
 static struct irqaction au1x_rtcmatch2_irqaction = {
 	.handler	= au1x_rtcmatch2_irq,
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.flags		= IRQF_TIMER,
 	.name		= "timer",
 	.dev_id		= &au1x_rtcmatch2_clockdev,
 };
@@ -178,6 +178,7 @@ static int alchemy_m2inttab[] __initdata = {
 	AU1100_RTC_MATCH2_INT,
 	AU1550_RTC_MATCH2_INT,
 	AU1200_RTC_MATCH2_INT,
+	AU1300_RTC_MATCH2_INT,
 };
 
 void __init plat_time_init(void)

arch/mips/alchemy/common/vss.c

@@ -0,0 +1,84 @@
+/*
+ * Au1300 media block power gating (VSS)
+ *
+ * This is a stop-gap solution until I have the clock framework integration
+ * ready. This stuff here really must be handled transparently when clocks
+ * for various media blocks are enabled/disabled.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#define VSS_GATE	0x00	/* gate wait timers */
+#define VSS_CLKRST	0x04	/* clock/block control */
+#define VSS_FTR		0x08	/* footers */
+
+#define VSS_ADDR(blk)	(KSEG1ADDR(AU1300_VSS_PHYS_ADDR) + (blk * 0x0c))
+
+static DEFINE_SPINLOCK(au1300_vss_lock);
+
+/* enable a block as outlined in the databook */
+static inline void __enable_block(int block)
+{
+	void __iomem *base = (void __iomem *)VSS_ADDR(block);
+
+	__raw_writel(3, base + VSS_CLKRST);	/* enable clock, assert reset */
+	wmb();
+
+	__raw_writel(0x01fffffe, base + VSS_GATE); /* maximum setup time */
+	wmb();
+
+	/* enable footers in sequence */
+	__raw_writel(0x01, base + VSS_FTR);
+	wmb();
+	__raw_writel(0x03, base + VSS_FTR);
+	wmb();
+	__raw_writel(0x07, base + VSS_FTR);
+	wmb();
+	__raw_writel(0x0f, base + VSS_FTR);
+	wmb();
+
+	__raw_writel(0x01ffffff, base + VSS_GATE); /* start FSM too */
+	wmb();
+
+	__raw_writel(2, base + VSS_CLKRST);	/* deassert reset */
+	wmb();
+
+	__raw_writel(0x1f, base + VSS_FTR);	/* enable isolation cells */
+	wmb();
+}
+
+/* disable a block as outlined in the databook */
+static inline void __disable_block(int block)
+{
+	void __iomem *base = (void __iomem *)VSS_ADDR(block);
+
+	__raw_writel(0x0f, base + VSS_FTR);	/* disable isolation cells */
+	wmb();
+	__raw_writel(0, base + VSS_GATE);	/* disable FSM */
+	wmb();
+	__raw_writel(3, base + VSS_CLKRST);	/* assert reset */
+	wmb();
+	__raw_writel(1, base + VSS_CLKRST);	/* disable clock */
+	wmb();
+	__raw_writel(0, base + VSS_FTR);	/* disable all footers */
+	wmb();
+}
+
+void au1300_vss_block_control(int block, int enable)
+{
+	unsigned long flags;
+
+	if (alchemy_get_cputype() != ALCHEMY_CPU_AU1300)
+		return;
+
+	/* only one block at a time */
+	spin_lock_irqsave(&au1300_vss_lock, flags);
+	if (enable)
+		__enable_block(block);
+	else
+		__disable_block(block);
+	spin_unlock_irqrestore(&au1300_vss_lock, flags);
+}
+EXPORT_SYMBOL_GPL(au1300_vss_block_control);

arch/mips/alchemy/devboards/Makefile

@@ -4,15 +4,10 @@
 
 obj-y += prom.o bcsr.o platform.o
 obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_MIPS_PB1000)	+= pb1000/
-obj-$(CONFIG_MIPS_PB1100)	+= pb1100/
-obj-$(CONFIG_MIPS_PB1200)	+= pb1200/
-obj-$(CONFIG_MIPS_PB1500)	+= pb1500/
-obj-$(CONFIG_MIPS_PB1550)	+= pb1550/
-obj-$(CONFIG_MIPS_DB1000)	+= db1x00/
-obj-$(CONFIG_MIPS_DB1100)	+= db1x00/
-obj-$(CONFIG_MIPS_DB1200)	+= db1200/
-obj-$(CONFIG_MIPS_DB1500)	+= db1x00/
-obj-$(CONFIG_MIPS_DB1550)	+= db1x00/
-obj-$(CONFIG_MIPS_BOSPORUS)	+= db1x00/
-obj-$(CONFIG_MIPS_MIRAGE)	+= db1x00/
+obj-$(CONFIG_MIPS_PB1100)	+= pb1100.o
+obj-$(CONFIG_MIPS_PB1500)	+= pb1500.o
+obj-$(CONFIG_MIPS_PB1550)	+= pb1550.o
+obj-$(CONFIG_MIPS_DB1000)	+= db1000.o
+obj-$(CONFIG_MIPS_DB1200)	+= db1200.o
+obj-$(CONFIG_MIPS_DB1300)	+= db1300.o
+obj-$(CONFIG_MIPS_DB1550)	+= db1550.o

arch/mips/alchemy/devboards/bcsr.c

@@ -97,14 +97,9 @@ static void bcsr_csc_handler(unsigned int irq, struct irq_desc *d)
 	enable_irq(irq);
 }
 
-/* NOTE: both the enable and mask bits must be cleared, otherwise the
- * CPLD generates tons of spurious interrupts (at least on my DB1200).
- *	-- mlau
- */
 static void bcsr_irq_mask(struct irq_data *d)
 {
 	unsigned short v = 1 << (d->irq - bcsr_csc_base);
-	__raw_writew(v, bcsr_virt + BCSR_REG_INTCLR);
 	__raw_writew(v, bcsr_virt + BCSR_REG_MASKCLR);
 	wmb();
 }
@@ -112,7 +107,6 @@ static void bcsr_irq_mask(struct irq_data *d)
 static void bcsr_irq_maskack(struct irq_data *d)
 {
 	unsigned short v = 1 << (d->irq - bcsr_csc_base);
-	__raw_writew(v, bcsr_virt + BCSR_REG_INTCLR);
 	__raw_writew(v, bcsr_virt + BCSR_REG_MASKCLR);
 	__raw_writew(v, bcsr_virt + BCSR_REG_INTSTAT);	/* ack */
 	wmb();
@@ -121,7 +115,6 @@ static void bcsr_irq_maskack(struct irq_data *d)
 static void bcsr_irq_unmask(struct irq_data *d)
 {
 	unsigned short v = 1 << (d->irq - bcsr_csc_base);
-	__raw_writew(v, bcsr_virt + BCSR_REG_INTSET);
 	__raw_writew(v, bcsr_virt + BCSR_REG_MASKSET);
 	wmb();
 }
@@ -137,9 +130,9 @@ void __init bcsr_init_irq(int csc_start, int csc_end, int hook_irq)
 {
 	unsigned int irq;
 
-	/* mask & disable & ack all */
-	__raw_writew(0xffff, bcsr_virt + BCSR_REG_INTCLR);
+	/* mask & enable & ack all */
 	__raw_writew(0xffff, bcsr_virt + BCSR_REG_MASKCLR);
+	__raw_writew(0xffff, bcsr_virt + BCSR_REG_INTSET);
 	__raw_writew(0xffff, bcsr_virt + BCSR_REG_INTSTAT);
 	wmb();
 

arch/mips/alchemy/devboards/db1000.c

@@ -0,0 +1,565 @@
+/*
+ * DBAu1000/1500/1100 board support
+ *
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/leds.h>
+#include <linux/mmc/host.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/ads7846.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1000_dma.h>
+#include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-db1x00/bcsr.h>
+#include <asm/reboot.h>
+#include <prom.h>
+#include "platform.h"
+
+#define F_SWAPPED (bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT)
+
+struct pci_dev;
+
+static const char *board_type_str(void)
+{
+	switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) {
+	case BCSR_WHOAMI_DB1000:
+		return "DB1000";
+	case BCSR_WHOAMI_DB1500:
+		return "DB1500";
+	case BCSR_WHOAMI_DB1100:
+		return "DB1100";
+	default:
+		return "(unknown)";
+	}
+}
+
+const char *get_system_type(void)
+{
+	return board_type_str();
+}
+
+void __init board_setup(void)
+{
+	/* initialize board register space */
+	bcsr_init(DB1000_BCSR_PHYS_ADDR,
+		  DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS);
+
+	printk(KERN_INFO "AMD Alchemy %s Board\n", board_type_str());
+}
+
+
+static int db1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+	if ((slot < 12) || (slot > 13) || pin == 0)
+		return -1;
+	if (slot == 12)
+		return (pin == 1) ? AU1500_PCI_INTA : 0xff;
+	if (slot == 13) {
+		switch (pin) {
+		case 1: return AU1500_PCI_INTA;
+		case 2: return AU1500_PCI_INTB;
+		case 3: return AU1500_PCI_INTC;
+		case 4: return AU1500_PCI_INTD;
+		}
+	}
+	return -1;
+}
+
+static struct resource alchemy_pci_host_res[] = {
+	[0] = {
+		.start	= AU1500_PCI_PHYS_ADDR,
+		.end	= AU1500_PCI_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct alchemy_pci_platdata db1500_pci_pd = {
+	.board_map_irq	= db1500_map_pci_irq,
+};
+
+static struct platform_device db1500_pci_host_dev = {
+	.dev.platform_data = &db1500_pci_pd,
+	.name		= "alchemy-pci",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(alchemy_pci_host_res),
+	.resource	= alchemy_pci_host_res,
+};
+
+static int __init db1500_pci_init(void)
+{
+	if (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) == BCSR_WHOAMI_DB1500)
+		return platform_device_register(&db1500_pci_host_dev);
+	return 0;
+}
+/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */
+arch_initcall(db1500_pci_init);
+
+
+static struct resource au1100_lcd_resources[] = {
+	[0] = {
+		.start	= AU1100_LCD_PHYS_ADDR,
+		.end	= AU1100_LCD_PHYS_ADDR + 0x800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1100_LCD_INT,
+		.end	= AU1100_LCD_INT,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device au1100_lcd_device = {
+	.name		= "au1100-lcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1100_lcd_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(au1100_lcd_resources),
+	.resource	= au1100_lcd_resources,
+};
+
+static struct resource alchemy_ac97c_res[] = {
+	[0] = {
+		.start	= AU1000_AC97_PHYS_ADDR,
+		.end	= AU1000_AC97_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMA_ID_AC97C_TX,
+		.end	= DMA_ID_AC97C_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMA_ID_AC97C_RX,
+		.end	= DMA_ID_AC97C_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device alchemy_ac97c_dev = {
+	.name		= "alchemy-ac97c",
+	.id		= -1,
+	.resource	= alchemy_ac97c_res,
+	.num_resources	= ARRAY_SIZE(alchemy_ac97c_res),
+};
+
+static struct platform_device alchemy_ac97c_dma_dev = {
+	.name		= "alchemy-pcm-dma",
+	.id		= 0,
+};
+
+static struct platform_device db1x00_codec_dev = {
+	.name		= "ac97-codec",
+	.id		= -1,
+};
+
+static struct platform_device db1x00_audio_dev = {
+	.name		= "db1000-audio",
+};
+
+/******************************************************************************/
+
+static irqreturn_t db1100_mmc_cd(int irq, void *ptr)
+{
+	void (*mmc_cd)(struct mmc_host *, unsigned long);
+	/* link against CONFIG_MMC=m */
+	mmc_cd = symbol_get(mmc_detect_change);
+	mmc_cd(ptr, msecs_to_jiffies(500));
+	symbol_put(mmc_detect_change);
+
+	return IRQ_HANDLED;
+}
+
+static int db1100_mmc_cd_setup(void *mmc_host, int en)
+{
+	int ret = 0;
+
+	if (en) {
+		irq_set_irq_type(AU1100_GPIO19_INT, IRQ_TYPE_EDGE_BOTH);
+		ret = request_irq(AU1100_GPIO19_INT, db1100_mmc_cd, 0,
+				  "sd0_cd", mmc_host);
+	} else
+		free_irq(AU1100_GPIO19_INT, mmc_host);
+	return ret;
+}
+
+static int db1100_mmc1_cd_setup(void *mmc_host, int en)
+{
+	int ret = 0;
+
+	if (en) {
+		irq_set_irq_type(AU1100_GPIO20_INT, IRQ_TYPE_EDGE_BOTH);
+		ret = request_irq(AU1100_GPIO20_INT, db1100_mmc_cd, 0,
+				  "sd1_cd", mmc_host);
+	} else
+		free_irq(AU1100_GPIO20_INT, mmc_host);
+	return ret;
+}
+
+static int db1100_mmc_card_readonly(void *mmc_host)
+{
+	/* testing suggests that this bit is inverted */
+	return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 0 : 1;
+}
+
+static int db1100_mmc_card_inserted(void *mmc_host)
+{
+	return !alchemy_gpio_get_value(19);
+}
+
+static void db1100_mmc_set_power(void *mmc_host, int state)
+{
+	if (state) {
+		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR);
+		msleep(400);	/* stabilization time */
+	} else
+		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0);
+}
+
+static void db1100_mmcled_set(struct led_classdev *led, enum led_brightness b)
+{
+	if (b != LED_OFF)
+		bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
+	else
+		bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
+}
+
+static struct led_classdev db1100_mmc_led = {
+	.brightness_set	= db1100_mmcled_set,
+};
+
+static int db1100_mmc1_card_readonly(void *mmc_host)
+{
+	return (bcsr_read(BCSR_BOARD) & BCSR_BOARD_SD1WP) ? 1 : 0;
+}
+
+static int db1100_mmc1_card_inserted(void *mmc_host)
+{
+	return !alchemy_gpio_get_value(20);
+}
+
+static void db1100_mmc1_set_power(void *mmc_host, int state)
+{
+	if (state) {
+		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR);
+		msleep(400);	/* stabilization time */
+	} else
+		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0);
+}
+
+static void db1100_mmc1led_set(struct led_classdev *led, enum led_brightness b)
+{
+	if (b != LED_OFF)
+		bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0);
+	else
+		bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1);
+}
+
+static struct led_classdev db1100_mmc1_led = {
+	.brightness_set	= db1100_mmc1led_set,
+};
+
+static struct au1xmmc_platform_data db1100_mmc_platdata[2] = {
+	[0] = {
+		.cd_setup	= db1100_mmc_cd_setup,
+		.set_power	= db1100_mmc_set_power,
+		.card_inserted	= db1100_mmc_card_inserted,
+		.card_readonly	= db1100_mmc_card_readonly,
+		.led		= &db1100_mmc_led,
+	},
+	[1] = {
+		.cd_setup	= db1100_mmc1_cd_setup,
+		.set_power	= db1100_mmc1_set_power,
+		.card_inserted	= db1100_mmc1_card_inserted,
+		.card_readonly	= db1100_mmc1_card_readonly,
+		.led		= &db1100_mmc1_led,
+	},
+};
+
+static struct resource au1100_mmc0_resources[] = {
+	[0] = {
+		.start	= AU1100_SD0_PHYS_ADDR,
+		.end	= AU1100_SD0_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1100_SD_INT,
+		.end	= AU1100_SD_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= DMA_ID_SD0_TX,
+		.end	= DMA_ID_SD0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= DMA_ID_SD0_RX,
+		.end	= DMA_ID_SD0_RX,
+		.flags	= IORESOURCE_DMA,
+	}
+};
+
+static u64 au1xxx_mmc_dmamask =  DMA_BIT_MASK(32);
+
+static struct platform_device db1100_mmc0_dev = {
+	.name		= "au1xxx-mmc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1xxx_mmc_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &db1100_mmc_platdata[0],
+	},
+	.num_resources	= ARRAY_SIZE(au1100_mmc0_resources),
+	.resource	= au1100_mmc0_resources,
+};
+
+static struct resource au1100_mmc1_res[] = {
+	[0] = {
+		.start	= AU1100_SD1_PHYS_ADDR,
+		.end	= AU1100_SD1_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1100_SD_INT,
+		.end	= AU1100_SD_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= DMA_ID_SD1_TX,
+		.end	= DMA_ID_SD1_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= DMA_ID_SD1_RX,
+		.end	= DMA_ID_SD1_RX,
+		.flags	= IORESOURCE_DMA,
+	}
+};
+
+static struct platform_device db1100_mmc1_dev = {
+	.name		= "au1xxx-mmc",
+	.id		= 1,
+	.dev = {
+		.dma_mask		= &au1xxx_mmc_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &db1100_mmc_platdata[1],
+	},
+	.num_resources	= ARRAY_SIZE(au1100_mmc1_res),
+	.resource	= au1100_mmc1_res,
+};
+
+/******************************************************************************/
+
+static void db1000_irda_set_phy_mode(int mode)
+{
+	unsigned short mask = BCSR_RESETS_IRDA_MODE_MASK | BCSR_RESETS_FIR_SEL;
+
+	switch (mode) {
+	case AU1000_IRDA_PHY_MODE_OFF:
+		bcsr_mod(BCSR_RESETS, mask, BCSR_RESETS_IRDA_MODE_OFF);
+		break;
+	case AU1000_IRDA_PHY_MODE_SIR:
+		bcsr_mod(BCSR_RESETS, mask, BCSR_RESETS_IRDA_MODE_FULL);
+		break;
+	case AU1000_IRDA_PHY_MODE_FIR:
+		bcsr_mod(BCSR_RESETS, mask, BCSR_RESETS_IRDA_MODE_FULL |
+					    BCSR_RESETS_FIR_SEL);
+		break;
+	}
+}
+
+static struct au1k_irda_platform_data db1000_irda_platdata = {
+	.set_phy_mode	= db1000_irda_set_phy_mode,
+};
+
+static struct resource au1000_irda_res[] = {
+	[0] = {
+		.start	= AU1000_IRDA_PHYS_ADDR,
+		.end	= AU1000_IRDA_PHYS_ADDR + 0x0fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1000_IRDA_TX_INT,
+		.end	= AU1000_IRDA_TX_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1000_IRDA_RX_INT,
+		.end	= AU1000_IRDA_RX_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device db1000_irda_dev = {
+	.name	= "au1000-irda",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &db1000_irda_platdata,
+	},
+	.resource	= au1000_irda_res,
+	.num_resources	= ARRAY_SIZE(au1000_irda_res),
+};
+
+/******************************************************************************/
+
+static struct ads7846_platform_data db1100_touch_pd = {
+	.model		= 7846,
+	.vref_mv	= 3300,
+	.gpio_pendown	= 21,
+};
+
+static struct spi_gpio_platform_data db1100_spictl_pd = {
+	.sck		= 209,
+	.mosi		= 208,
+	.miso		= 207,
+	.num_chipselect = 1,
+};
+
+static struct spi_board_info db1100_spi_info[] __initdata = {
+	[0] = {
+		.modalias	 = "ads7846",
+		.max_speed_hz	 = 3250000,
+		.bus_num	 = 0,
+		.chip_select	 = 0,
+		.mode		 = 0,
+		.irq		 = AU1100_GPIO21_INT,
+		.platform_data	 = &db1100_touch_pd,
+		.controller_data = (void *)210,	/* for spi_gpio: CS# GPIO210 */
+	},
+};
+
+static struct platform_device db1100_spi_dev = {
+	.name		= "spi_gpio",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &db1100_spictl_pd,
+	},
+};
+
+
+static struct platform_device *db1x00_devs[] = {
+	&db1x00_codec_dev,
+	&alchemy_ac97c_dma_dev,
+	&alchemy_ac97c_dev,
+	&db1x00_audio_dev,
+};
+
+static struct platform_device *db1000_devs[] = {
+	&db1000_irda_dev,
+};
+
+static struct platform_device *db1100_devs[] = {
+	&au1100_lcd_device,
+	&db1100_mmc0_dev,
+	&db1100_mmc1_dev,
+	&db1000_irda_dev,
+	&db1100_spi_dev,
+};
+
+static int __init db1000_dev_init(void)
+{
+	int board = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
+	int c0, c1, d0, d1, s0, s1;
+	unsigned long pfc;
+
+	if (board == BCSR_WHOAMI_DB1500) {
+		c0 = AU1500_GPIO2_INT;
+		c1 = AU1500_GPIO5_INT;
+		d0 = AU1500_GPIO0_INT;
+		d1 = AU1500_GPIO3_INT;
+		s0 = AU1500_GPIO1_INT;
+		s1 = AU1500_GPIO4_INT;
+	} else if (board == BCSR_WHOAMI_DB1100) {
+		c0 = AU1100_GPIO2_INT;
+		c1 = AU1100_GPIO5_INT;
+		d0 = AU1100_GPIO0_INT;
+		d1 = AU1100_GPIO3_INT;
+		s0 = AU1100_GPIO1_INT;
+		s1 = AU1100_GPIO4_INT;
+
+		gpio_direction_input(19);	/* sd0 cd# */
+		gpio_direction_input(20);	/* sd1 cd# */
+		gpio_direction_input(21);	/* touch pendown# */
+		gpio_direction_input(207);	/* SPI MISO */
+		gpio_direction_output(208, 0);	/* SPI MOSI */
+		gpio_direction_output(209, 1);	/* SPI SCK */
+		gpio_direction_output(210, 1);	/* SPI CS# */
+
+		/* spi_gpio on SSI0 pins */
+		pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
+		pfc |= (1 << 0);	/* SSI0 pins as GPIOs */
+		__raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
+		wmb();
+
+		spi_register_board_info(db1100_spi_info,
+					ARRAY_SIZE(db1100_spi_info));
+
+		platform_add_devices(db1100_devs, ARRAY_SIZE(db1100_devs));
+	} else if (board == BCSR_WHOAMI_DB1000) {
+		c0 = AU1000_GPIO2_INT;
+		c1 = AU1000_GPIO5_INT;
+		d0 = AU1000_GPIO0_INT;
+		d1 = AU1000_GPIO3_INT;
+		s0 = AU1000_GPIO1_INT;
+		s1 = AU1000_GPIO4_INT;
+		platform_add_devices(db1000_devs, ARRAY_SIZE(db1000_devs));
+	} else
+		return 0; /* unknown board, no further dev setup to do */
+
+	irq_set_irq_type(d0, IRQ_TYPE_EDGE_BOTH);
+	irq_set_irq_type(d1, IRQ_TYPE_EDGE_BOTH);
+	irq_set_irq_type(c0, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(c1, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(s0, IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(s1, IRQ_TYPE_LEVEL_LOW);
+
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+		c0, d0,	/*s0*/0, 0, 0);
+
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004000000,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004000000,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
+		c1, d1,	/*s1*/0, 0, 1);
+
+	platform_add_devices(db1x00_devs, ARRAY_SIZE(db1x00_devs));
+	db1x_register_norflash(32 << 20, 4 /* 32bit */, F_SWAPPED);
+	return 0;
+}
+device_initcall(db1000_dev_init);

arch/mips/alchemy/devboards/db1200/platform.c → arch/mips/alchemy/devboards/db1200.c

@@ -1,7 +1,7 @@
 /*
- * DBAu1200 board platform device registration
+ * DBAu1200/PBAu1200 board platform device registration
  *
- * Copyright (C) 2008-2009 Manuel Lauss
+ * Copyright (C) 2008-2011 Manuel Lauss
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -22,6 +22,7 @@
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/leds.h>
 #include <linux/mmc/host.h>
@@ -33,18 +34,116 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/smc91x.h>
-
+#include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1100_mmc.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
+#include <asm/mach-au1x00/au1200fb.h>
 #include <asm/mach-au1x00/au1550_spi.h>
 #include <asm/mach-db1x00/bcsr.h>
 #include <asm/mach-db1x00/db1200.h>
 
-#include "../platform.h"
+#include "platform.h"
+
+static const char *board_type_str(void)
+{
+	switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) {
+	case BCSR_WHOAMI_PB1200_DDR1:
+	case BCSR_WHOAMI_PB1200_DDR2:
+		return "PB1200";
+	case BCSR_WHOAMI_DB1200:
+		return "DB1200";
+	default:
+		return "(unknown)";
+	}
+}
+
+const char *get_system_type(void)
+{
+	return board_type_str();
+}
+
+static int __init detect_board(void)
+{
+	int bid;
+
+	/* try the DB1200 first */
+	bcsr_init(DB1200_BCSR_PHYS_ADDR,
+		  DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
+	if (BCSR_WHOAMI_DB1200 == BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) {
+		unsigned short t = bcsr_read(BCSR_HEXLEDS);
+		bcsr_write(BCSR_HEXLEDS, ~t);
+		if (bcsr_read(BCSR_HEXLEDS) != t) {
+			bcsr_write(BCSR_HEXLEDS, t);
+			return 0;
+		}
+	}
+
+	/* okay, try the PB1200 then */
+	bcsr_init(PB1200_BCSR_PHYS_ADDR,
+		  PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS);
+	bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
+	if ((bid == BCSR_WHOAMI_PB1200_DDR1) ||
+	    (bid == BCSR_WHOAMI_PB1200_DDR2)) {
+		unsigned short t = bcsr_read(BCSR_HEXLEDS);
+		bcsr_write(BCSR_HEXLEDS, ~t);
+		if (bcsr_read(BCSR_HEXLEDS) != t) {
+			bcsr_write(BCSR_HEXLEDS, t);
+			return 0;
+		}
+	}
+
+	return 1;	/* it's neither */
+}
+
+void __init board_setup(void)
+{
+	unsigned long freq0, clksrc, div, pfc;
+	unsigned short whoami;
+
+	if (detect_board()) {
+		printk(KERN_ERR "NOT running on a DB1200/PB1200 board!\n");
+		return;
+	}
+
+	whoami = bcsr_read(BCSR_WHOAMI);
+	printk(KERN_INFO "Alchemy/AMD/RMI %s Board, CPLD Rev %d"
+		"  Board-ID %d  Daughtercard ID %d\n", board_type_str(),
+		(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
+
+	/* SMBus/SPI on PSC0, Audio on PSC1 */
+	pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
+	pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
+	pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3);
+	pfc |= SYS_PINFUNC_P1C;	/* SPI is configured later */
+	__raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
+	wmb();
+
+	/* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from
+	 * CPU clock; all other clock generators off/unused.
+	 */
+	div = (get_au1x00_speed() + 25000000) / 50000000;
+	if (div & 1)
+		div++;
+	div = ((div >> 1) - 1) & 0xff;
+
+	freq0 = div << SYS_FC_FRDIV0_BIT;
+	__raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
+	wmb();
+	freq0 |= SYS_FC_FE0;	/* enable F0 */
+	__raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
+	wmb();
+
+	/* psc0_intclk comes 1:1 from F0 */
+	clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT;
+	__raw_writel(clksrc, (void __iomem *)SYS_CLKSRC);
+	wmb();
+}
+
+/******************************************************************************/
 
 static struct mtd_partition db1200_spiflash_parts[] = {
 	{
-		.name	= "DB1200 SPI flash",
+		.name	= "spi_flash",
 		.offset	= 0,
 		.size	= MTDPART_SIZ_FULL,
 	},
@@ -78,18 +177,9 @@ static struct spi_board_info db1200_spi_devs[] __initdata = {
 };
 
 static struct i2c_board_info db1200_i2c_devs[] __initdata = {
-	{
-		/* AT24C04-10 I2C eeprom */
-		I2C_BOARD_INFO("24c04", 0x52),
-	},
-	{
-		/* Philips NE1619 temp/voltage sensor (adm1025 drv) */
-		I2C_BOARD_INFO("ne1619", 0x2d),
-	},
-	{
-		/* I2S audio codec WM8731 */
-		I2C_BOARD_INFO("wm8731", 0x1b),
-	},
+	{ I2C_BOARD_INFO("24c04", 0x52),  }, /* AT24C04-10 I2C eeprom */
+	{ I2C_BOARD_INFO("ne1619", 0x2d), }, /* adm1025-compat hwmon */
+	{ I2C_BOARD_INFO("wm8731", 0x1b), }, /* I2S audio codec WM8731 */
 };
 
 /**********************************************************************/
@@ -206,7 +296,7 @@ static struct platform_device db1200_eth_dev = {
 static struct resource db1200_ide_res[] = {
 	[0] = {
 		.start	= DB1200_IDE_PHYS_ADDR,
-		.end 	= DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1,
+		.end	= DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -221,13 +311,13 @@ static struct resource db1200_ide_res[] = {
 	},
 };
 
-static u64 ide_dmamask = DMA_BIT_MASK(32);
+static u64 au1200_ide_dmamask = DMA_BIT_MASK(32);
 
 static struct platform_device db1200_ide_dev = {
 	.name		= "au1200-ide",
 	.id		= 0,
 	.dev = {
-		.dma_mask 		= &ide_dmamask,
+		.dma_mask		= &au1200_ide_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
 	},
 	.num_resources	= ARRAY_SIZE(db1200_ide_res),
@@ -236,13 +326,6 @@ static struct platform_device db1200_ide_dev = {
 
 /**********************************************************************/
 
-static struct platform_device db1200_rtc_dev = {
-	.name	= "rtc-au1xxx",
-	.id	= -1,
-};
-
-/**********************************************************************/
-
 /* SD carddetects:  they're supposed to be edge-triggered, but ack
  * doesn't seem to work (CPLD Rev 2).  Instead, the screaming one
  * is disabled and its counterpart enabled.  The 500ms timeout is
@@ -276,12 +359,12 @@ static int db1200_mmc_cd_setup(void *mmc_host, int en)
 
 	if (en) {
 		ret = request_irq(DB1200_SD0_INSERT_INT, db1200_mmc_cd,
-				  IRQF_DISABLED, "sd_insert", mmc_host);
+				  0, "sd_insert", mmc_host);
 		if (ret)
 			goto out;
 
 		ret = request_irq(DB1200_SD0_EJECT_INT, db1200_mmc_cd,
-				  IRQF_DISABLED, "sd_eject", mmc_host);
+				  0, "sd_eject", mmc_host);
 		if (ret) {
 			free_irq(DB1200_SD0_INSERT_INT, mmc_host);
 			goto out;
@@ -333,12 +416,109 @@ static struct led_classdev db1200_mmc_led = {
 	.brightness_set	= db1200_mmcled_set,
 };
 
-static struct au1xmmc_platform_data db1200mmc_platdata = {
-	.cd_setup	= db1200_mmc_cd_setup,
-	.set_power	= db1200_mmc_set_power,
-	.card_inserted	= db1200_mmc_card_inserted,
-	.card_readonly	= db1200_mmc_card_readonly,
-	.led		= &db1200_mmc_led,
+/* -- */
+
+static irqreturn_t pb1200_mmc1_cd(int irq, void *ptr)
+{
+	void(*mmc_cd)(struct mmc_host *, unsigned long);
+
+	if (irq == PB1200_SD1_INSERT_INT) {
+		disable_irq_nosync(PB1200_SD1_INSERT_INT);
+		enable_irq(PB1200_SD1_EJECT_INT);
+	} else {
+		disable_irq_nosync(PB1200_SD1_EJECT_INT);
+		enable_irq(PB1200_SD1_INSERT_INT);
+	}
+
+	/* link against CONFIG_MMC=m */
+	mmc_cd = symbol_get(mmc_detect_change);
+	if (mmc_cd) {
+		mmc_cd(ptr, msecs_to_jiffies(500));
+		symbol_put(mmc_detect_change);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int pb1200_mmc1_cd_setup(void *mmc_host, int en)
+{
+	int ret;
+
+	if (en) {
+		ret = request_irq(PB1200_SD1_INSERT_INT, pb1200_mmc1_cd, 0,
+				  "sd1_insert", mmc_host);
+		if (ret)
+			goto out;
+
+		ret = request_irq(PB1200_SD1_EJECT_INT, pb1200_mmc1_cd, 0,
+				  "sd1_eject", mmc_host);
+		if (ret) {
+			free_irq(PB1200_SD1_INSERT_INT, mmc_host);
+			goto out;
+		}
+
+		if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT)
+			enable_irq(PB1200_SD1_EJECT_INT);
+		else
+			enable_irq(PB1200_SD1_INSERT_INT);
+
+	} else {
+		free_irq(PB1200_SD1_INSERT_INT, mmc_host);
+		free_irq(PB1200_SD1_EJECT_INT, mmc_host);
+	}
+	ret = 0;
+out:
+	return ret;
+}
+
+static void pb1200_mmc1led_set(struct led_classdev *led,
+			enum led_brightness brightness)
+{
+	if (brightness != LED_OFF)
+			bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0);
+	else
+			bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1);
+}
+
+static struct led_classdev pb1200_mmc1_led = {
+	.brightness_set	= pb1200_mmc1led_set,
+};
+
+static void pb1200_mmc1_set_power(void *mmc_host, int state)
+{
+	if (state) {
+		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR);
+		msleep(400);	/* stabilization time */
+	} else
+		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0);
+}
+
+static int pb1200_mmc1_card_readonly(void *mmc_host)
+{
+	return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0;
+}
+
+static int pb1200_mmc1_card_inserted(void *mmc_host)
+{
+	return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0;
+}
+
+
+static struct au1xmmc_platform_data db1200_mmc_platdata[2] = {
+	[0] = {
+		.cd_setup	= db1200_mmc_cd_setup,
+		.set_power	= db1200_mmc_set_power,
+		.card_inserted	= db1200_mmc_card_inserted,
+		.card_readonly	= db1200_mmc_card_readonly,
+		.led		= &db1200_mmc_led,
+	},
+	[1] = {
+		.cd_setup	= pb1200_mmc1_cd_setup,
+		.set_power	= pb1200_mmc1_set_power,
+		.card_inserted	= pb1200_mmc1_card_inserted,
+		.card_readonly	= pb1200_mmc1_card_readonly,
+		.led		= &pb1200_mmc1_led,
+	},
 };
 
 static struct resource au1200_mmc0_resources[] = {
@@ -372,14 +552,76 @@ static struct platform_device db1200_mmc0_dev = {
 	.dev = {
 		.dma_mask		= &au1xxx_mmc_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &db1200mmc_platdata,
+		.platform_data		= &db1200_mmc_platdata[0],
 	},
 	.num_resources	= ARRAY_SIZE(au1200_mmc0_resources),
 	.resource	= au1200_mmc0_resources,
 };
 
+static struct resource au1200_mmc1_res[] = {
+	[0] = {
+		.start	= AU1100_SD1_PHYS_ADDR,
+		.end	= AU1100_SD1_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1200_SD_INT,
+		.end	= AU1200_SD_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1200_DSCR_CMD0_SDMS_TX1,
+		.end	= AU1200_DSCR_CMD0_SDMS_TX1,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1200_DSCR_CMD0_SDMS_RX1,
+		.end	= AU1200_DSCR_CMD0_SDMS_RX1,
+		.flags	= IORESOURCE_DMA,
+	}
+};
+
+static struct platform_device pb1200_mmc1_dev = {
+	.name		= "au1xxx-mmc",
+	.id		= 1,
+	.dev = {
+		.dma_mask		= &au1xxx_mmc_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &db1200_mmc_platdata[1],
+	},
+	.num_resources	= ARRAY_SIZE(au1200_mmc1_res),
+	.resource	= au1200_mmc1_res,
+};
+
 /**********************************************************************/
 
+static int db1200fb_panel_index(void)
+{
+	return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;
+}
+
+static int db1200fb_panel_init(void)
+{
+	/* Apply power */
+	bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+				BCSR_BOARD_LCDBL);
+	return 0;
+}
+
+static int db1200fb_panel_shutdown(void)
+{
+	/* Remove power */
+	bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+			     BCSR_BOARD_LCDBL, 0);
+	return 0;
+}
+
+static struct au1200fb_platdata db1200fb_pd = {
+	.panel_index	= db1200fb_panel_index,
+	.panel_init	= db1200fb_panel_init,
+	.panel_shutdown	= db1200fb_panel_shutdown,
+};
+
 static struct resource au1200_lcd_res[] = {
 	[0] = {
 		.start	= AU1200_LCD_PHYS_ADDR,
@@ -401,6 +643,7 @@ static struct platform_device au1200_lcd_dev = {
 	.dev = {
 		.dma_mask		= &au1200_lcd_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &db1200fb_pd,
 	},
 	.num_resources	= ARRAY_SIZE(au1200_lcd_res),
 	.resource	= au1200_lcd_res,
@@ -519,7 +762,6 @@ static struct platform_device *db1200_devs[] __initdata = {
 	&db1200_mmc0_dev,
 	&au1200_lcd_dev,
 	&db1200_eth_dev,
-	&db1200_rtc_dev,
 	&db1200_nand_dev,
 	&db1200_audiodma_dev,
 	&db1200_audio_dev,
@@ -527,11 +769,62 @@ static struct platform_device *db1200_devs[] __initdata = {
 	&db1200_sound_dev,
 };
 
+static struct platform_device *pb1200_devs[] __initdata = {
+	&pb1200_mmc1_dev,
+};
+
+/* Some peripheral base addresses differ on the PB1200 */
+static int __init pb1200_res_fixup(void)
+{
+	/* CPLD Revs earlier than 4 cause problems */
+	if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) {
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "PB1200 must be at CPLD rev 4. Please have\n");
+		printk(KERN_ERR "the board updated to latest revisions.\n");
+		printk(KERN_ERR "This software will not work reliably\n");
+		printk(KERN_ERR "on anything older than CPLD rev 4.!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		return 1;
+	}
+
+	db1200_nand_res[0].start = PB1200_NAND_PHYS_ADDR;
+	db1200_nand_res[0].end   = PB1200_NAND_PHYS_ADDR + 0xff;
+	db1200_ide_res[0].start = PB1200_IDE_PHYS_ADDR;
+	db1200_ide_res[0].end   = PB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1;
+	db1200_eth_res[0].start = PB1200_ETH_PHYS_ADDR;
+	db1200_eth_res[0].end   = PB1200_ETH_PHYS_ADDR + 0xff;
+	return 0;
+}
+
 static int __init db1200_dev_init(void)
 {
 	unsigned long pfc;
 	unsigned short sw;
-	int swapped;
+	int swapped, bid;
+
+	bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
+	if ((bid == BCSR_WHOAMI_PB1200_DDR1) ||
+	    (bid == BCSR_WHOAMI_PB1200_DDR2)) {
+		if (pb1200_res_fixup())
+			return -ENODEV;
+	}
+
+	/* GPIO7 is low-level triggered CPLD cascade */
+	irq_set_irq_type(AU1200_GPIO7_INT, IRQ_TYPE_LEVEL_LOW);
+	bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
+
+	/* insert/eject pairs: one of both is always screaming.  To avoid
+	 * issues they must not be automatically enabled when initially
+	 * requested.
+	 */
+	irq_set_status_flags(DB1200_SD0_INSERT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1200_SD0_EJECT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1200_PC0_INSERT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1200_PC0_EJECT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1200_PC1_INSERT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1200_PC1_EJECT_INT, IRQ_NOAUTOEN);
 
 	i2c_register_board_info(0, db1200_i2c_devs,
 				ARRAY_SIZE(db1200_i2c_devs));
@@ -540,6 +833,7 @@ static int __init db1200_dev_init(void)
 
 	/* SWITCHES:	S6.8 I2C/SPI selector  (OFF=I2C  ON=SPI)
 	 *		S6.7 AC97/I2S selector (OFF=AC97 ON=I2S)
+	 *		or S12 on the PB1200.
 	 */
 
 	/* NOTE: GPIO215 controls OTG VBUS supply.  In SPI mode however
@@ -554,7 +848,7 @@ static int __init db1200_dev_init(void)
 	gpio_request(215, "otg-vbus");
 	gpio_direction_output(215, 1);
 
-	printk(KERN_INFO "DB1200 device configuration:\n");
+	printk(KERN_INFO "%s device configuration:\n", board_type_str());
 
 	sw = bcsr_read(BCSR_SWITCHES);
 	if (sw & BCSR_SWITCHES_DIP_8) {
@@ -595,7 +889,7 @@ static int __init db1200_dev_init(void)
 
 	/* Audio PSC clock is supplied externally. (FIXME: platdata!!) */
 	__raw_writel(PSC_SEL_CLK_SERCLK,
-		(void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
+	    (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
 	wmb();
 
 	db1x_register_pcmcia_socket(
@@ -621,28 +915,13 @@ static int __init db1200_dev_init(void)
 	swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
 	db1x_register_norflash(64 << 20, 2, swapped);
 
-	return platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs));
-}
-device_initcall(db1200_dev_init);
-
-/* au1200fb calls these: STERBT EINEN TRAGISCHEN TOD!!! */
-int board_au1200fb_panel(void)
-{
-	return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;
-}
+	platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs));
 
-int board_au1200fb_panel_init(void)
-{
-	/* Apply power */
-	bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
-				BCSR_BOARD_LCDBL);
-	return 0;
-}
+	/* PB1200 is a DB1200 with a 2nd MMC and Camera connector */
+	if ((bid == BCSR_WHOAMI_PB1200_DDR1) ||
+	    (bid == BCSR_WHOAMI_PB1200_DDR2))
+		platform_add_devices(pb1200_devs, ARRAY_SIZE(pb1200_devs));
 
-int board_au1200fb_panel_shutdown(void)
-{
-	/* Remove power */
-	bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
-			     BCSR_BOARD_LCDBL, 0);
 	return 0;
 }
+device_initcall(db1200_dev_init);

arch/mips/alchemy/devboards/db1200/Makefile

@@ -1 +0,0 @@
-obj-y += setup.o platform.o

arch/mips/alchemy/devboards/db1200/setup.c

@@ -1,81 +0,0 @@
-/*
- * Alchemy/AMD/RMI DB1200 board setup.
- *
- * Licensed under the terms outlined in the file COPYING in the root of
- * this source archive.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-db1x00/bcsr.h>
-#include <asm/mach-db1x00/db1200.h>
-
-const char *get_system_type(void)
-{
-	return "Alchemy Db1200";
-}
-
-void __init board_setup(void)
-{
-	unsigned long freq0, clksrc, div, pfc;
-	unsigned short whoami;
-
-	bcsr_init(DB1200_BCSR_PHYS_ADDR,
-		  DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
-
-	whoami = bcsr_read(BCSR_WHOAMI);
-	printk(KERN_INFO "Alchemy/AMD/RMI DB1200 Board, CPLD Rev %d"
-		"  Board-ID %d  Daughtercard ID %d\n",
-		(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
-
-	/* SMBus/SPI on PSC0, Audio on PSC1 */
-	pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
-	pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
-	pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3);
-	pfc |= SYS_PINFUNC_P1C;	/* SPI is configured later */
-	__raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
-	wmb();
-
-	/* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from
-	 * CPU clock; all other clock generators off/unused.
-	 */
-	div = (get_au1x00_speed() + 25000000) / 50000000;
-	if (div & 1)
-		div++;
-	div = ((div >> 1) - 1) & 0xff;
-
-	freq0 = div << SYS_FC_FRDIV0_BIT;
-	__raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
-	wmb();
-	freq0 |= SYS_FC_FE0;	/* enable F0 */
-	__raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
-	wmb();
-
-	/* psc0_intclk comes 1:1 from F0 */
-	clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT;
-	__raw_writel(clksrc, (void __iomem *)SYS_CLKSRC);
-	wmb();
-}
-
-static int __init db1200_arch_init(void)
-{
-	/* GPIO7 is low-level triggered CPLD cascade */
-	irq_set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
-	bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
-
-	/* insert/eject pairs: one of both is always screaming.  To avoid
-	 * issues they must not be automatically enabled when initially
-	 * requested.
-	 */
-	irq_set_status_flags(DB1200_SD0_INSERT_INT, IRQ_NOAUTOEN);
-	irq_set_status_flags(DB1200_SD0_EJECT_INT, IRQ_NOAUTOEN);
-	irq_set_status_flags(DB1200_PC0_INSERT_INT, IRQ_NOAUTOEN);
-	irq_set_status_flags(DB1200_PC0_EJECT_INT, IRQ_NOAUTOEN);
-	irq_set_status_flags(DB1200_PC1_INSERT_INT, IRQ_NOAUTOEN);
-	irq_set_status_flags(DB1200_PC1_EJECT_INT, IRQ_NOAUTOEN);
-	return 0;
-}
-arch_initcall(db1200_arch_init);

arch/mips/alchemy/devboards/db1300.c

@@ -0,0 +1,785 @@
+/*
+ * DBAu1300 init and platform device setup.
+ *
+ * (c) 2009 Manuel Lauss <manuel.lauss@googlemail.com>
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/init.h>
+#include <linux/input.h>	/* KEY_* codes */
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/ata_platform.h>
+#include <linux/mmc/host.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-au1x00/au1200fb.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
+#include <asm/mach-db1x00/db1300.h>
+#include <asm/mach-db1x00/bcsr.h>
+#include <asm/mach-au1x00/prom.h>
+
+#include "platform.h"
+
+static struct i2c_board_info db1300_i2c_devs[] __initdata = {
+	{ I2C_BOARD_INFO("wm8731", 0x1b), },	/* I2S audio codec */
+	{ I2C_BOARD_INFO("ne1619", 0x2d), },	/* adm1025-compat hwmon */
+};
+
+/* multifunction pins to assign to GPIO controller */
+static int db1300_gpio_pins[] __initdata = {
+	AU1300_PIN_LCDPWM0, AU1300_PIN_PSC2SYNC1, AU1300_PIN_WAKE1,
+	AU1300_PIN_WAKE2, AU1300_PIN_WAKE3, AU1300_PIN_FG3AUX,
+	AU1300_PIN_EXTCLK1,
+	-1,	/* terminator */
+};
+
+/* multifunction pins to assign to device functions */
+static int db1300_dev_pins[] __initdata = {
+	/* wake-from-str pins 0-3 */
+	AU1300_PIN_WAKE0,
+	/* external clock sources for PSC0 */
+	AU1300_PIN_EXTCLK0,
+	/* 8bit MMC interface on SD0: 6-9 */
+	AU1300_PIN_SD0DAT4, AU1300_PIN_SD0DAT5, AU1300_PIN_SD0DAT6,
+	AU1300_PIN_SD0DAT7,
+	/* UART1 pins: 11-18 */
+	AU1300_PIN_U1RI, AU1300_PIN_U1DCD, AU1300_PIN_U1DSR,
+	AU1300_PIN_U1CTS, AU1300_PIN_U1RTS, AU1300_PIN_U1DTR,
+	AU1300_PIN_U1RX, AU1300_PIN_U1TX,
+	/* UART0 pins: 19-24 */
+	AU1300_PIN_U0RI, AU1300_PIN_U0DCD, AU1300_PIN_U0DSR,
+	AU1300_PIN_U0CTS, AU1300_PIN_U0RTS, AU1300_PIN_U0DTR,
+	/* UART2: 25-26 */
+	AU1300_PIN_U2RX, AU1300_PIN_U2TX,
+	/* UART3: 27-28 */
+	AU1300_PIN_U3RX, AU1300_PIN_U3TX,
+	/* LCD controller PWMs, ext pixclock: 30-31 */
+	AU1300_PIN_LCDPWM1, AU1300_PIN_LCDCLKIN,
+	/* SD1 interface: 32-37 */
+	AU1300_PIN_SD1DAT0, AU1300_PIN_SD1DAT1, AU1300_PIN_SD1DAT2,
+	AU1300_PIN_SD1DAT3, AU1300_PIN_SD1CMD, AU1300_PIN_SD1CLK,
+	/* SD2 interface: 38-43 */
+	AU1300_PIN_SD2DAT0, AU1300_PIN_SD2DAT1, AU1300_PIN_SD2DAT2,
+	AU1300_PIN_SD2DAT3, AU1300_PIN_SD2CMD, AU1300_PIN_SD2CLK,
+	/* PSC0/1 clocks: 44-45 */
+	AU1300_PIN_PSC0CLK, AU1300_PIN_PSC1CLK,
+	/* PSCs: 46-49/50-53/54-57/58-61 */
+	AU1300_PIN_PSC0SYNC0, AU1300_PIN_PSC0SYNC1, AU1300_PIN_PSC0D0,
+	AU1300_PIN_PSC0D1,
+	AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0,
+	AU1300_PIN_PSC1D1,
+	AU1300_PIN_PSC2SYNC0,                       AU1300_PIN_PSC2D0,
+	AU1300_PIN_PSC2D1,
+	AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0,
+	AU1300_PIN_PSC3D1,
+	/* PCMCIA interface: 62-70 */
+	AU1300_PIN_PCE2, AU1300_PIN_PCE1, AU1300_PIN_PIOS16,
+	AU1300_PIN_PIOR, AU1300_PIN_PWE, AU1300_PIN_PWAIT,
+	AU1300_PIN_PREG, AU1300_PIN_POE, AU1300_PIN_PIOW,
+	/* camera interface H/V sync inputs: 71-72 */
+	AU1300_PIN_CIMLS, AU1300_PIN_CIMFS,
+	/* PSC2/3 clocks: 73-74 */
+	AU1300_PIN_PSC2CLK, AU1300_PIN_PSC3CLK,
+	-1,	/* terminator */
+};
+
+static void __init db1300_gpio_config(void)
+{
+	int *i;
+
+	i = &db1300_dev_pins[0];
+	while (*i != -1)
+		au1300_pinfunc_to_dev(*i++);
+
+	i = &db1300_gpio_pins[0];
+	while (*i != -1)
+		au1300_gpio_direction_input(*i++);/* implies pin_to_gpio */
+
+	au1300_set_dbdma_gpio(1, AU1300_PIN_FG3AUX);
+}
+
+char *get_system_type(void)
+{
+	return "DB1300";
+}
+
+/**********************************************************************/
+
+static void au1300_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+				 unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long ioaddr = (unsigned long)this->IO_ADDR_W;
+
+	ioaddr &= 0xffffff00;
+
+	if (ctrl & NAND_CLE) {
+		ioaddr += MEM_STNAND_CMD;
+	} else if (ctrl & NAND_ALE) {
+		ioaddr += MEM_STNAND_ADDR;
+	} else {
+		/* assume we want to r/w real data  by default */
+		ioaddr += MEM_STNAND_DATA;
+	}
+	this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr;
+	if (cmd != NAND_CMD_NONE) {
+		__raw_writeb(cmd, this->IO_ADDR_W);
+		wmb();
+	}
+}
+
+static int au1300_nand_device_ready(struct mtd_info *mtd)
+{
+	return __raw_readl((void __iomem *)MEM_STSTAT) & 1;
+}
+
+static const char *db1300_part_probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition db1300_nand_parts[] = {
+	{
+		.name	= "NAND FS 0",
+		.offset	= 0,
+		.size	= 8 * 1024 * 1024,
+	},
+	{
+		.name	= "NAND FS 1",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL
+	},
+};
+
+struct platform_nand_data db1300_nand_platdata = {
+	.chip = {
+		.nr_chips	= 1,
+		.chip_offset	= 0,
+		.nr_partitions	= ARRAY_SIZE(db1300_nand_parts),
+		.partitions	= db1300_nand_parts,
+		.chip_delay	= 20,
+		.part_probe_types = db1300_part_probes,
+	},
+	.ctrl = {
+		.dev_ready	= au1300_nand_device_ready,
+		.cmd_ctrl	= au1300_nand_cmd_ctrl,
+	},
+};
+
+static struct resource db1300_nand_res[] = {
+	[0] = {
+		.start	= DB1300_NAND_PHYS_ADDR,
+		.end	= DB1300_NAND_PHYS_ADDR + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device db1300_nand_dev = {
+	.name		= "gen_nand",
+	.num_resources	= ARRAY_SIZE(db1300_nand_res),
+	.resource	= db1300_nand_res,
+	.id		= -1,
+	.dev		= {
+		.platform_data = &db1300_nand_platdata,
+	}
+};
+
+/**********************************************************************/
+
+static struct resource db1300_eth_res[] = {
+	[0] = {
+		.start		= DB1300_ETH_PHYS_ADDR,
+		.end		= DB1300_ETH_PHYS_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= DB1300_ETH_INT,
+		.end		= DB1300_ETH_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config db1300_eth_config = {
+	.phy_interface		= PHY_INTERFACE_MODE_MII,
+	.irq_polarity		= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type		= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags			= SMSC911X_USE_32BIT,
+};
+
+static struct platform_device db1300_eth_dev = {
+	.name			= "smsc911x",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(db1300_eth_res),
+	.resource		= db1300_eth_res,
+	.dev = {
+		.platform_data	= &db1300_eth_config,
+	},
+};
+
+/**********************************************************************/
+
+static struct resource au1300_psc1_res[] = {
+	[0] = {
+		.start	= AU1300_PSC1_PHYS_ADDR,
+		.end	= AU1300_PSC1_PHYS_ADDR + 0x0fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1300_PSC1_INT,
+		.end	= AU1300_PSC1_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1300_DSCR_CMD0_PSC1_TX,
+		.end	= AU1300_DSCR_CMD0_PSC1_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1300_DSCR_CMD0_PSC1_RX,
+		.end	= AU1300_DSCR_CMD0_PSC1_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1300_ac97_dev = {
+	.name		= "au1xpsc_ac97",
+	.id		= 1,	/* PSC ID. match with AC97 codec ID! */
+	.num_resources	= ARRAY_SIZE(au1300_psc1_res),
+	.resource	= au1300_psc1_res,
+};
+
+/**********************************************************************/
+
+static struct resource au1300_psc2_res[] = {
+	[0] = {
+		.start	= AU1300_PSC2_PHYS_ADDR,
+		.end	= AU1300_PSC2_PHYS_ADDR + 0x0fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1300_PSC2_INT,
+		.end	= AU1300_PSC2_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1300_DSCR_CMD0_PSC2_TX,
+		.end	= AU1300_DSCR_CMD0_PSC2_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1300_DSCR_CMD0_PSC2_RX,
+		.end	= AU1300_DSCR_CMD0_PSC2_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1300_i2s_dev = {
+	.name		= "au1xpsc_i2s",
+	.id		= 2,	/* PSC ID */
+	.num_resources	= ARRAY_SIZE(au1300_psc2_res),
+	.resource	= au1300_psc2_res,
+};
+
+/**********************************************************************/
+
+static struct resource au1300_psc3_res[] = {
+	[0] = {
+		.start	= AU1300_PSC3_PHYS_ADDR,
+		.end	= AU1300_PSC3_PHYS_ADDR + 0x0fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1300_PSC3_INT,
+		.end	= AU1300_PSC3_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1300_DSCR_CMD0_PSC3_TX,
+		.end	= AU1300_DSCR_CMD0_PSC3_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1300_DSCR_CMD0_PSC3_RX,
+		.end	= AU1300_DSCR_CMD0_PSC3_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1300_i2c_dev = {
+	.name		= "au1xpsc_smbus",
+	.id		= 0,	/* bus number */
+	.num_resources	= ARRAY_SIZE(au1300_psc3_res),
+	.resource	= au1300_psc3_res,
+};
+
+/**********************************************************************/
+
+/* proper key assignments when facing the LCD panel.  For key assignments
+ * according to the schematics swap up with down and left with right.
+ * I chose to use it to emulate the arrow keys of a keyboard.
+ */
+static struct gpio_keys_button db1300_5waysw_arrowkeys[] = {
+	{
+		.code			= KEY_DOWN,
+		.gpio			= AU1300_PIN_LCDPWM0,
+		.type			= EV_KEY,
+		.debounce_interval	= 1,
+		.active_low		= 1,
+		.desc			= "5waysw-down",
+	},
+	{
+		.code			= KEY_UP,
+		.gpio			= AU1300_PIN_PSC2SYNC1,
+		.type			= EV_KEY,
+		.debounce_interval	= 1,
+		.active_low		= 1,
+		.desc			= "5waysw-up",
+	},
+	{
+		.code			= KEY_RIGHT,
+		.gpio			= AU1300_PIN_WAKE3,
+		.type			= EV_KEY,
+		.debounce_interval	= 1,
+		.active_low		= 1,
+		.desc			= "5waysw-right",
+	},
+	{
+		.code			= KEY_LEFT,
+		.gpio			= AU1300_PIN_WAKE2,
+		.type			= EV_KEY,
+		.debounce_interval	= 1,
+		.active_low		= 1,
+		.desc			= "5waysw-left",
+	},
+	{
+		.code			= KEY_ENTER,
+		.gpio			= AU1300_PIN_WAKE1,
+		.type			= EV_KEY,
+		.debounce_interval	= 1,
+		.active_low		= 1,
+		.desc			= "5waysw-push",
+	},
+};
+
+static struct gpio_keys_platform_data db1300_5waysw_data = {
+	.buttons	= db1300_5waysw_arrowkeys,
+	.nbuttons	= ARRAY_SIZE(db1300_5waysw_arrowkeys),
+	.rep		= 1,
+	.name		= "db1300-5wayswitch",
+};
+
+static struct platform_device db1300_5waysw_dev = {
+	.name		= "gpio-keys",
+	.dev	= {
+		.platform_data	= &db1300_5waysw_data,
+	},
+};
+
+/**********************************************************************/
+
+static struct pata_platform_info db1300_ide_info = {
+	.ioport_shift	= DB1300_IDE_REG_SHIFT,
+};
+
+#define IDE_ALT_START	(14 << DB1300_IDE_REG_SHIFT)
+static struct resource db1300_ide_res[] = {
+	[0] = {
+		.start	= DB1300_IDE_PHYS_ADDR,
+		.end	= DB1300_IDE_PHYS_ADDR + IDE_ALT_START - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DB1300_IDE_PHYS_ADDR + IDE_ALT_START,
+		.end	= DB1300_IDE_PHYS_ADDR + DB1300_IDE_PHYS_LEN - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= DB1300_IDE_INT,
+		.end	= DB1300_IDE_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device db1300_ide_dev = {
+	.dev	= {
+		.platform_data	= &db1300_ide_info,
+	},
+	.name		= "pata_platform",
+	.resource	= db1300_ide_res,
+	.num_resources	= ARRAY_SIZE(db1300_ide_res),
+};
+
+/**********************************************************************/
+
+static irqreturn_t db1300_mmc_cd(int irq, void *ptr)
+{
+	void(*mmc_cd)(struct mmc_host *, unsigned long);
+
+	/* disable the one currently screaming. No other way to shut it up */
+	if (irq == DB1300_SD1_INSERT_INT) {
+		disable_irq_nosync(DB1300_SD1_INSERT_INT);
+		enable_irq(DB1300_SD1_EJECT_INT);
+	} else {
+		disable_irq_nosync(DB1300_SD1_EJECT_INT);
+		enable_irq(DB1300_SD1_INSERT_INT);
+	}
+
+	/* link against CONFIG_MMC=m.  We can only be called once MMC core has
+	 * initialized the controller, so symbol_get() should always succeed.
+	 */
+	mmc_cd = symbol_get(mmc_detect_change);
+	mmc_cd(ptr, msecs_to_jiffies(500));
+	symbol_put(mmc_detect_change);
+
+	return IRQ_HANDLED;
+}
+
+static int db1300_mmc_card_readonly(void *mmc_host)
+{
+	/* it uses SD1 interface, but the DB1200's SD0 bit in the CPLD */
+	return bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP;
+}
+
+static int db1300_mmc_card_inserted(void *mmc_host)
+{
+	return bcsr_read(BCSR_SIGSTAT) & (1 << 12); /* insertion irq signal */
+}
+
+static int db1300_mmc_cd_setup(void *mmc_host, int en)
+{
+	int ret;
+
+	if (en) {
+		ret = request_irq(DB1300_SD1_INSERT_INT, db1300_mmc_cd, 0,
+				  "sd_insert", mmc_host);
+		if (ret)
+			goto out;
+
+		ret = request_irq(DB1300_SD1_EJECT_INT, db1300_mmc_cd, 0,
+				  "sd_eject", mmc_host);
+		if (ret) {
+			free_irq(DB1300_SD1_INSERT_INT, mmc_host);
+			goto out;
+		}
+
+		if (db1300_mmc_card_inserted(mmc_host))
+			enable_irq(DB1300_SD1_EJECT_INT);
+		else
+			enable_irq(DB1300_SD1_INSERT_INT);
+
+	} else {
+		free_irq(DB1300_SD1_INSERT_INT, mmc_host);
+		free_irq(DB1300_SD1_EJECT_INT, mmc_host);
+	}
+	ret = 0;
+out:
+	return ret;
+}
+
+static void db1300_mmcled_set(struct led_classdev *led,
+			      enum led_brightness brightness)
+{
+	if (brightness != LED_OFF)
+		bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
+	else
+		bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
+}
+
+static struct led_classdev db1300_mmc_led = {
+	.brightness_set	= db1300_mmcled_set,
+};
+
+struct au1xmmc_platform_data db1300_sd1_platdata = {
+	.cd_setup	= db1300_mmc_cd_setup,
+	.card_inserted	= db1300_mmc_card_inserted,
+	.card_readonly	= db1300_mmc_card_readonly,
+	.led		= &db1300_mmc_led,
+};
+
+static struct resource au1300_sd1_res[] = {
+	[0] = {
+		.start	= AU1300_SD1_PHYS_ADDR,
+		.end	= AU1300_SD1_PHYS_ADDR,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1300_SD1_INT,
+		.end	= AU1300_SD1_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1300_DSCR_CMD0_SDMS_TX1,
+		.end	= AU1300_DSCR_CMD0_SDMS_TX1,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1300_DSCR_CMD0_SDMS_RX1,
+		.end	= AU1300_DSCR_CMD0_SDMS_RX1,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1300_sd1_dev = {
+	.dev = {
+		.platform_data	= &db1300_sd1_platdata,
+	},
+	.name		= "au1xxx-mmc",
+	.id		= 1,
+	.resource	= au1300_sd1_res,
+	.num_resources	= ARRAY_SIZE(au1300_sd1_res),
+};
+
+/**********************************************************************/
+
+static int db1300_movinand_inserted(void *mmc_host)
+{
+	return 0; /* disable for now, it doesn't work yet */
+}
+
+static int db1300_movinand_readonly(void *mmc_host)
+{
+	return 0;
+}
+
+static void db1300_movinand_led_set(struct led_classdev *led,
+				    enum led_brightness brightness)
+{
+	if (brightness != LED_OFF)
+		bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0);
+	else
+		bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1);
+}
+
+static struct led_classdev db1300_movinand_led = {
+	.brightness_set		= db1300_movinand_led_set,
+};
+
+struct au1xmmc_platform_data db1300_sd0_platdata = {
+	.card_inserted		= db1300_movinand_inserted,
+	.card_readonly		= db1300_movinand_readonly,
+	.led			= &db1300_movinand_led,
+	.mask_host_caps		= MMC_CAP_NEEDS_POLL,
+};
+
+static struct resource au1300_sd0_res[] = {
+	[0] = {
+		.start	= AU1100_SD0_PHYS_ADDR,
+		.end	= AU1100_SD0_PHYS_ADDR,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1300_SD0_INT,
+		.end	= AU1300_SD0_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1300_DSCR_CMD0_SDMS_TX0,
+		.end	= AU1300_DSCR_CMD0_SDMS_TX0,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1300_DSCR_CMD0_SDMS_RX0,
+		.end	= AU1300_DSCR_CMD0_SDMS_RX0,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1300_sd0_dev = {
+	.dev = {
+		.platform_data	= &db1300_sd0_platdata,
+	},
+	.name		= "au1xxx-mmc",
+	.id		= 0,
+	.resource	= au1300_sd0_res,
+	.num_resources	= ARRAY_SIZE(au1300_sd0_res),
+};
+
+/**********************************************************************/
+
+static struct platform_device db1300_wm9715_dev = {
+	.name		= "wm9712-codec",
+	.id		= 1,	/* ID of PSC for AC97 audio, see asoc glue! */
+};
+
+static struct platform_device db1300_ac97dma_dev = {
+	.name		= "au1xpsc-pcm",
+	.id		= 1,	/* PSC ID */
+};
+
+static struct platform_device db1300_i2sdma_dev = {
+	.name		= "au1xpsc-pcm",
+	.id		= 2,	/* PSC ID */
+};
+
+static struct platform_device db1300_sndac97_dev = {
+	.name		= "db1300-ac97",
+};
+
+static struct platform_device db1300_sndi2s_dev = {
+	.name		= "db1300-i2s",
+};
+
+/**********************************************************************/
+
+static int db1300fb_panel_index(void)
+{
+	return 9;	/* DB1300_800x480 */
+}
+
+static int db1300fb_panel_init(void)
+{
+	/* Apply power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */
+	bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD,
+			     BCSR_BOARD_LCDBL);
+	return 0;
+}
+
+static int db1300fb_panel_shutdown(void)
+{
+	/* Remove power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */
+	bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDBL,
+			     BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD);
+	return 0;
+}
+
+static struct au1200fb_platdata db1300fb_pd = {
+	.panel_index	= db1300fb_panel_index,
+	.panel_init	= db1300fb_panel_init,
+	.panel_shutdown	= db1300fb_panel_shutdown,
+};
+
+static struct resource au1300_lcd_res[] = {
+	[0] = {
+		.start	= AU1200_LCD_PHYS_ADDR,
+		.end	= AU1200_LCD_PHYS_ADDR + 0x800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1300_LCD_INT,
+		.end	= AU1300_LCD_INT,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static u64 au1300_lcd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device db1300_lcd_dev = {
+	.name		= "au1200-lcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1300_lcd_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &db1300fb_pd,
+	},
+	.num_resources	= ARRAY_SIZE(au1300_lcd_res),
+	.resource	= au1300_lcd_res,
+};
+
+/**********************************************************************/
+
+static struct platform_device *db1300_dev[] __initdata = {
+	&db1300_eth_dev,
+	&db1300_i2c_dev,
+	&db1300_5waysw_dev,
+	&db1300_nand_dev,
+	&db1300_ide_dev,
+	&db1300_sd0_dev,
+	&db1300_sd1_dev,
+	&db1300_lcd_dev,
+	&db1300_ac97_dev,
+	&db1300_i2s_dev,
+	&db1300_wm9715_dev,
+	&db1300_ac97dma_dev,
+	&db1300_i2sdma_dev,
+	&db1300_sndac97_dev,
+	&db1300_sndi2s_dev,
+};
+
+static int __init db1300_device_init(void)
+{
+	int swapped, cpldirq;
+
+	/* setup CPLD IRQ muxer */
+	cpldirq = au1300_gpio_to_irq(AU1300_PIN_EXTCLK1);
+	irq_set_irq_type(cpldirq, IRQ_TYPE_LEVEL_HIGH);
+	bcsr_init_irq(DB1300_FIRST_INT, DB1300_LAST_INT, cpldirq);
+
+	/* insert/eject IRQs: one always triggers so don't enable them
+	 * when doing request_irq() on them.  DB1200 has this bug too.
+	 */
+	irq_set_status_flags(DB1300_SD1_INSERT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1300_SD1_EJECT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1300_CF_INSERT_INT, IRQ_NOAUTOEN);
+	irq_set_status_flags(DB1300_CF_EJECT_INT, IRQ_NOAUTOEN);
+
+	/*
+	 * setup board
+	 */
+	prom_get_ethernet_addr(&db1300_eth_config.mac[0]);
+
+	i2c_register_board_info(0, db1300_i2c_devs,
+				ARRAY_SIZE(db1300_i2c_devs));
+
+	/* Audio PSC clock is supplied by codecs (PSC1, 2) */
+	__raw_writel(PSC_SEL_CLK_SERCLK,
+	    (void __iomem *)KSEG1ADDR(AU1300_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
+	wmb();
+	__raw_writel(PSC_SEL_CLK_SERCLK,
+	    (void __iomem *)KSEG1ADDR(AU1300_PSC2_PHYS_ADDR) + PSC_SEL_OFFSET);
+	wmb();
+	/* I2C uses internal 48MHz EXTCLK1 */
+	__raw_writel(PSC_SEL_CLK_INTCLK,
+	    (void __iomem *)KSEG1ADDR(AU1300_PSC3_PHYS_ADDR) + PSC_SEL_OFFSET);
+	wmb();
+
+	/* enable power to USB ports */
+	bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_USBHPWR | BCSR_RESETS_OTGPWR);
+
+	/* although it is socket #0, it uses the CPLD bits which previous boards
+	 * have used for socket #1.
+	 */
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x00400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x00400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x00010000 - 1,
+		DB1300_CF_INT, DB1300_CF_INSERT_INT, 0, DB1300_CF_EJECT_INT, 1);
+
+	swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
+	db1x_register_norflash(64 << 20, 2, swapped);
+
+	return platform_add_devices(db1300_dev, ARRAY_SIZE(db1300_dev));
+}
+device_initcall(db1300_device_init);
+
+
+void __init board_setup(void)
+{
+	unsigned short whoami;
+
+	db1300_gpio_config();
+	bcsr_init(DB1300_BCSR_PHYS_ADDR,
+		  DB1300_BCSR_PHYS_ADDR + DB1300_BCSR_HEXLED_OFS);
+
+	whoami = bcsr_read(BCSR_WHOAMI);
+	printk(KERN_INFO "NetLogic DBAu1300 Development Platform.\n\t"
+		"BoardID %d   CPLD Rev %d   DaughtercardID %d\n",
+		BCSR_WHOAMI_BOARD(whoami), BCSR_WHOAMI_CPLD(whoami),
+		BCSR_WHOAMI_DCID(whoami));
+
+	/* enable UARTs, YAMON only enables #2 */
+	alchemy_uart_enable(AU1300_UART0_PHYS_ADDR);
+	alchemy_uart_enable(AU1300_UART1_PHYS_ADDR);
+	alchemy_uart_enable(AU1300_UART3_PHYS_ADDR);
+}

arch/mips/alchemy/devboards/db1550.c

@@ -0,0 +1,498 @@
+/*
+ * Alchemy Db1550 board support
+ *
+ * (c) 2011 Manuel Lauss <manuel.lauss@googlemail.com>
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_eth.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
+#include <asm/mach-au1x00/au1550_spi.h>
+#include <asm/mach-db1x00/bcsr.h>
+#include <prom.h>
+#include "platform.h"
+
+
+const char *get_system_type(void)
+{
+	return "DB1550";
+}
+
+static void __init db1550_hw_setup(void)
+{
+	void __iomem *base;
+
+	alchemy_gpio_direction_output(203, 0);	/* red led on */
+
+	/* complete SPI setup: link psc0_intclk to a 48MHz source,
+	 * and assign GPIO16 to PSC0_SYNC1 (SPI cs# line)
+	 */
+	base = (void __iomem *)SYS_CLKSRC;
+	__raw_writel(__raw_readl(base) | 0x000001e0, base);
+	base = (void __iomem *)SYS_PINFUNC;
+	__raw_writel(__raw_readl(base) | 1, base);
+	wmb();
+
+	/* reset the AC97 codec now, the reset time in the psc-ac97 driver
+	 * is apparently too short although it's ridiculous as it is.
+	 */
+	base = (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR);
+	__raw_writel(PSC_SEL_CLK_SERCLK | PSC_SEL_PS_AC97MODE,
+		     base + PSC_SEL_OFFSET);
+	__raw_writel(PSC_CTRL_DISABLE, base + PSC_CTRL_OFFSET);
+	wmb();
+	__raw_writel(PSC_AC97RST_RST, base + PSC_AC97RST_OFFSET);
+	wmb();
+
+	alchemy_gpio_direction_output(202, 0);	/* green led on */
+}
+
+void __init board_setup(void)
+{
+	unsigned short whoami;
+
+	bcsr_init(DB1550_BCSR_PHYS_ADDR,
+		  DB1550_BCSR_PHYS_ADDR + DB1550_BCSR_HEXLED_OFS);
+
+	whoami = bcsr_read(BCSR_WHOAMI);
+	printk(KERN_INFO "Alchemy/AMD DB1550 Board, CPLD Rev %d"
+		"  Board-ID %d  Daughtercard ID %d\n",
+		(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
+
+	db1550_hw_setup();
+}
+
+/*****************************************************************************/
+
+static struct mtd_partition db1550_spiflash_parts[] = {
+	{
+		.name	= "spi_flash",
+		.offset	= 0,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct flash_platform_data db1550_spiflash_data = {
+	.name		= "s25fl010",
+	.parts		= db1550_spiflash_parts,
+	.nr_parts	= ARRAY_SIZE(db1550_spiflash_parts),
+	.type		= "m25p10",
+};
+
+static struct spi_board_info db1550_spi_devs[] __initdata = {
+	{
+		/* TI TMP121AIDBVR temp sensor */
+		.modalias	= "tmp121",
+		.max_speed_hz	= 2400000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,
+	},
+	{
+		/* Spansion S25FL001D0FMA SPI flash */
+		.modalias	= "m25p80",
+		.max_speed_hz	= 2400000,
+		.bus_num	= 0,
+		.chip_select	= 1,
+		.mode		= SPI_MODE_0,
+		.platform_data	= &db1550_spiflash_data,
+	},
+};
+
+static struct i2c_board_info db1550_i2c_devs[] __initdata = {
+	{ I2C_BOARD_INFO("24c04",  0x52),}, /* AT24C04-10 I2C eeprom */
+	{ I2C_BOARD_INFO("ne1619", 0x2d),}, /* adm1025-compat hwmon */
+	{ I2C_BOARD_INFO("wm8731", 0x1b),}, /* I2S audio codec WM8731 */
+};
+
+/**********************************************************************/
+
+static void au1550_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+				 unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long ioaddr = (unsigned long)this->IO_ADDR_W;
+
+	ioaddr &= 0xffffff00;
+
+	if (ctrl & NAND_CLE) {
+		ioaddr += MEM_STNAND_CMD;
+	} else if (ctrl & NAND_ALE) {
+		ioaddr += MEM_STNAND_ADDR;
+	} else {
+		/* assume we want to r/w real data  by default */
+		ioaddr += MEM_STNAND_DATA;
+	}
+	this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr;
+	if (cmd != NAND_CMD_NONE) {
+		__raw_writeb(cmd, this->IO_ADDR_W);
+		wmb();
+	}
+}
+
+static int au1550_nand_device_ready(struct mtd_info *mtd)
+{
+	return __raw_readl((void __iomem *)MEM_STSTAT) & 1;
+}
+
+static const char *db1550_part_probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition db1550_nand_parts[] = {
+	{
+		.name	= "NAND FS 0",
+		.offset	= 0,
+		.size	= 8 * 1024 * 1024,
+	},
+	{
+		.name	= "NAND FS 1",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL
+	},
+};
+
+struct platform_nand_data db1550_nand_platdata = {
+	.chip = {
+		.nr_chips	= 1,
+		.chip_offset	= 0,
+		.nr_partitions	= ARRAY_SIZE(db1550_nand_parts),
+		.partitions	= db1550_nand_parts,
+		.chip_delay	= 20,
+		.part_probe_types = db1550_part_probes,
+	},
+	.ctrl = {
+		.dev_ready	= au1550_nand_device_ready,
+		.cmd_ctrl	= au1550_nand_cmd_ctrl,
+	},
+};
+
+static struct resource db1550_nand_res[] = {
+	[0] = {
+		.start	= 0x20000000,
+		.end	= 0x200000ff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device db1550_nand_dev = {
+	.name		= "gen_nand",
+	.num_resources	= ARRAY_SIZE(db1550_nand_res),
+	.resource	= db1550_nand_res,
+	.id		= -1,
+	.dev		= {
+		.platform_data = &db1550_nand_platdata,
+	}
+};
+
+/**********************************************************************/
+
+static struct resource au1550_psc0_res[] = {
+	[0] = {
+		.start	= AU1550_PSC0_PHYS_ADDR,
+		.end	= AU1550_PSC0_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1550_PSC0_INT,
+		.end	= AU1550_PSC0_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1550_DSCR_CMD0_PSC0_TX,
+		.end	= AU1550_DSCR_CMD0_PSC0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1550_DSCR_CMD0_PSC0_RX,
+		.end	= AU1550_DSCR_CMD0_PSC0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static void db1550_spi_cs_en(struct au1550_spi_info *spi, int cs, int pol)
+{
+	if (cs)
+		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SPISEL);
+	else
+		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SPISEL, 0);
+}
+
+static struct au1550_spi_info db1550_spi_platdata = {
+	.mainclk_hz	= 48000000,	/* PSC0 clock: max. 2.4MHz SPI clk */
+	.num_chipselect = 2,
+	.activate_cs	= db1550_spi_cs_en,
+};
+
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device db1550_spi_dev = {
+	.dev	= {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &db1550_spi_platdata,
+	},
+	.name		= "au1550-spi",
+	.id		= 0,	/* bus number */
+	.num_resources	= ARRAY_SIZE(au1550_psc0_res),
+	.resource	= au1550_psc0_res,
+};
+
+/**********************************************************************/
+
+static struct resource au1550_psc1_res[] = {
+	[0] = {
+		.start	= AU1550_PSC1_PHYS_ADDR,
+		.end	= AU1550_PSC1_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1550_PSC1_INT,
+		.end	= AU1550_PSC1_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1550_DSCR_CMD0_PSC1_TX,
+		.end	= AU1550_DSCR_CMD0_PSC1_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1550_DSCR_CMD0_PSC1_RX,
+		.end	= AU1550_DSCR_CMD0_PSC1_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1550_ac97_dev = {
+	.name		= "au1xpsc_ac97",
+	.id		= 1,	/* PSC ID */
+	.num_resources	= ARRAY_SIZE(au1550_psc1_res),
+	.resource	= au1550_psc1_res,
+};
+
+
+static struct resource au1550_psc2_res[] = {
+	[0] = {
+		.start	= AU1550_PSC2_PHYS_ADDR,
+		.end	= AU1550_PSC2_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1550_PSC2_INT,
+		.end	= AU1550_PSC2_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1550_DSCR_CMD0_PSC2_TX,
+		.end	= AU1550_DSCR_CMD0_PSC2_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1550_DSCR_CMD0_PSC2_RX,
+		.end	= AU1550_DSCR_CMD0_PSC2_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1550_i2c_dev = {
+	.name		= "au1xpsc_smbus",
+	.id		= 0,	/* bus number */
+	.num_resources	= ARRAY_SIZE(au1550_psc2_res),
+	.resource	= au1550_psc2_res,
+};
+
+/**********************************************************************/
+
+static struct resource au1550_psc3_res[] = {
+	[0] = {
+		.start	= AU1550_PSC3_PHYS_ADDR,
+		.end	= AU1550_PSC3_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1550_PSC3_INT,
+		.end	= AU1550_PSC3_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AU1550_DSCR_CMD0_PSC3_TX,
+		.end	= AU1550_DSCR_CMD0_PSC3_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= AU1550_DSCR_CMD0_PSC3_RX,
+		.end	= AU1550_DSCR_CMD0_PSC3_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1550_i2s_dev = {
+	.name		= "au1xpsc_i2s",
+	.id		= 3,	/* PSC ID */
+	.num_resources	= ARRAY_SIZE(au1550_psc3_res),
+	.resource	= au1550_psc3_res,
+};
+
+/**********************************************************************/
+
+static struct platform_device db1550_stac_dev = {
+	.name		= "ac97-codec",
+	.id		= 1,	/* on PSC1 */
+};
+
+static struct platform_device db1550_ac97dma_dev = {
+	.name		= "au1xpsc-pcm",
+	.id		= 1,	/* on PSC3 */
+};
+
+static struct platform_device db1550_i2sdma_dev = {
+	.name		= "au1xpsc-pcm",
+	.id		= 3,	/* on PSC3 */
+};
+
+static struct platform_device db1550_sndac97_dev = {
+	.name		= "db1550-ac97",
+};
+
+static struct platform_device db1550_sndi2s_dev = {
+	.name		= "db1550-i2s",
+};
+
+/**********************************************************************/
+
+static int db1550_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+	if ((slot < 11) || (slot > 13) || pin == 0)
+		return -1;
+	if (slot == 11)
+		return (pin == 1) ? AU1550_PCI_INTC : 0xff;
+	if (slot == 12) {
+		switch (pin) {
+		case 1: return AU1550_PCI_INTB;
+		case 2: return AU1550_PCI_INTC;
+		case 3: return AU1550_PCI_INTD;
+		case 4: return AU1550_PCI_INTA;
+		}
+	}
+	if (slot == 13) {
+		switch (pin) {
+		case 1: return AU1550_PCI_INTA;
+		case 2: return AU1550_PCI_INTB;
+		case 3: return AU1550_PCI_INTC;
+		case 4: return AU1550_PCI_INTD;
+		}
+	}
+	return -1;
+}
+
+static struct resource alchemy_pci_host_res[] = {
+	[0] = {
+		.start	= AU1500_PCI_PHYS_ADDR,
+		.end	= AU1500_PCI_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct alchemy_pci_platdata db1550_pci_pd = {
+	.board_map_irq	= db1550_map_pci_irq,
+};
+
+static struct platform_device db1550_pci_host_dev = {
+	.dev.platform_data = &db1550_pci_pd,
+	.name		= "alchemy-pci",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(alchemy_pci_host_res),
+	.resource	= alchemy_pci_host_res,
+};
+
+/**********************************************************************/
+
+static struct platform_device *db1550_devs[] __initdata = {
+	&db1550_nand_dev,
+	&db1550_i2c_dev,
+	&db1550_ac97_dev,
+	&db1550_spi_dev,
+	&db1550_i2s_dev,
+	&db1550_stac_dev,
+	&db1550_ac97dma_dev,
+	&db1550_i2sdma_dev,
+	&db1550_sndac97_dev,
+	&db1550_sndi2s_dev,
+};
+
+/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */
+static int __init db1550_pci_init(void)
+{
+	return platform_device_register(&db1550_pci_host_dev);
+}
+arch_initcall(db1550_pci_init);
+
+static int __init db1550_dev_init(void)
+{
+	int swapped;
+
+	irq_set_irq_type(AU1550_GPIO0_INT, IRQ_TYPE_EDGE_BOTH);  /* CD0# */
+	irq_set_irq_type(AU1550_GPIO1_INT, IRQ_TYPE_EDGE_BOTH);  /* CD1# */
+	irq_set_irq_type(AU1550_GPIO3_INT, IRQ_TYPE_LEVEL_LOW);  /* CARD0# */
+	irq_set_irq_type(AU1550_GPIO5_INT, IRQ_TYPE_LEVEL_LOW);  /* CARD1# */
+	irq_set_irq_type(AU1550_GPIO21_INT, IRQ_TYPE_LEVEL_LOW); /* STSCHG0# */
+	irq_set_irq_type(AU1550_GPIO22_INT, IRQ_TYPE_LEVEL_LOW); /* STSCHG1# */
+
+	i2c_register_board_info(0, db1550_i2c_devs,
+				ARRAY_SIZE(db1550_i2c_devs));
+	spi_register_board_info(db1550_spi_devs,
+				ARRAY_SIZE(db1550_i2c_devs));
+
+	/* Audio PSC clock is supplied by codecs (PSC1, 3) FIXME: platdata!! */
+	__raw_writel(PSC_SEL_CLK_SERCLK,
+	    (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
+	wmb();
+	__raw_writel(PSC_SEL_CLK_SERCLK,
+	    (void __iomem *)KSEG1ADDR(AU1550_PSC3_PHYS_ADDR) + PSC_SEL_OFFSET);
+	wmb();
+	/* SPI/I2C use internally supplied 50MHz source */
+	__raw_writel(PSC_SEL_CLK_INTCLK,
+	    (void __iomem *)KSEG1ADDR(AU1550_PSC0_PHYS_ADDR) + PSC_SEL_OFFSET);
+	wmb();
+	__raw_writel(PSC_SEL_CLK_INTCLK,
+	    (void __iomem *)KSEG1ADDR(AU1550_PSC2_PHYS_ADDR) + PSC_SEL_OFFSET);
+	wmb();
+
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+		AU1550_GPIO3_INT, AU1550_GPIO0_INT,
+		/*AU1550_GPIO21_INT*/0, 0, 0);
+
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004000000,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004000000,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
+		AU1550_GPIO5_INT, AU1550_GPIO1_INT,
+		/*AU1550_GPIO22_INT*/0, 0, 1);
+
+	swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT;
+	db1x_register_norflash(128 << 20, 4, swapped);
+
+	return platform_add_devices(db1550_devs, ARRAY_SIZE(db1550_devs));
+}
+device_initcall(db1550_dev_init);

arch/mips/alchemy/devboards/db1x00/Makefile

@@ -1,8 +0,0 @@
-#
-#  Copyright 2000, 2008 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc. <source@mvista.com>
-#
-# Makefile for the Alchemy Semiconductor DBAu1xx0 boards.
-#
-
-obj-y := board_setup.o platform.o

arch/mips/alchemy/devboards/db1x00/board_setup.c

@@ -1,229 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Alchemy Db1x00 board setup.
- *
- * Copyright 2000, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/pm.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-au1x00/au1xxx_eth.h>
-#include <asm/mach-db1x00/db1x00.h>
-#include <asm/mach-db1x00/bcsr.h>
-#include <asm/reboot.h>
-
-#include <prom.h>
-
-#ifdef CONFIG_MIPS_BOSPORUS
-char irq_tab_alchemy[][5] __initdata = {
-	[11] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 11 - miniPCI  */
-	[12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - SN1741   */
-	[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
-};
-
-/*
- * Micrel/Kendin 5 port switch attached to MAC0,
- * MAC0 is associated with PHY address 5 (== WAN port)
- * MAC1 is not associated with any PHY, since it's connected directly
- * to the switch.
- * no interrupts are used
- */
-static struct au1000_eth_platform_data eth0_pdata = {
-	.phy_static_config	= 1,
-	.phy_addr		= 5,
-};
-
-static void bosporus_power_off(void)
-{
-	while (1)
-		asm volatile (".set mips3 ; wait ; .set mips0");
-}
-
-const char *get_system_type(void)
-{
-	return "Alchemy Bosporus Gateway Reference";
-}
-#endif
-
-
-#ifdef CONFIG_MIPS_MIRAGE
-static void mirage_power_off(void)
-{
-	alchemy_gpio_direction_output(210, 1);
-}
-
-const char *get_system_type(void)
-{
-	return "Alchemy Mirage";
-}
-#endif
-
-
-#if defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE)
-static void mips_softreset(void)
-{
-	asm volatile ("jr\t%0" : : "r"(0xbfc00000));
-}
-
-#else
-
-const char *get_system_type(void)
-{
-	return "Alchemy Db1x00";
-}
-#endif
-
-
-void __init board_setup(void)
-{
-	unsigned long bcsr1, bcsr2;
-
-	bcsr1 = DB1000_BCSR_PHYS_ADDR;
-	bcsr2 = DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS;
-
-#ifdef CONFIG_MIPS_DB1000
-	printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1500
-	printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1100
-	printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
-#endif
-#ifdef CONFIG_MIPS_BOSPORUS
-	au1xxx_override_eth_cfg(0, &eth0_pdata);
-
-	printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
-#endif
-#ifdef CONFIG_MIPS_MIRAGE
-	printk(KERN_INFO "AMD Alchemy Mirage Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1550
-	printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n");
-
-	bcsr1 = DB1550_BCSR_PHYS_ADDR;
-	bcsr2 = DB1550_BCSR_PHYS_ADDR + DB1550_BCSR_HEXLED_OFS;
-#endif
-
-	/* initialize board register space */
-	bcsr_init(bcsr1, bcsr2);
-
-#if defined(CONFIG_IRDA) && defined(CONFIG_AU1000_FIR)
-	{
-		u32 pin_func;
-
-		/* Set IRFIRSEL instead of GPIO15 */
-		pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
-		au_writel(pin_func, SYS_PINFUNC);
-		/* Power off until the driver is in use */
-		bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
-			 BCSR_RESETS_IRDA_MODE_OFF);
-	}
-#endif
-	bcsr_write(BCSR_PCMCIA, 0);	/* turn off PCMCIA power */
-
-	/* Enable GPIO[31:0] inputs */
-	alchemy_gpio1_input_enable();
-
-#ifdef CONFIG_MIPS_MIRAGE
-	{
-		u32 pin_func;
-
-		/* GPIO[20] is output */
-		alchemy_gpio_direction_output(20, 0);
-
-		/* Set GPIO[210:208] instead of SSI_0 */
-		pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
-
-		/* Set GPIO[215:211] for LEDs */
-		pin_func |= 5 << 2;
-
-		/* Set GPIO[214:213] for more LEDs */
-		pin_func |= 5 << 12;
-
-		/* Set GPIO[207:200] instead of PCMCIA/LCD */
-		pin_func |= SYS_PF_LCD | SYS_PF_PC;
-		au_writel(pin_func, SYS_PINFUNC);
-
-		/*
-		 * Enable speaker amplifier.  This should
-		 * be part of the audio driver.
-		 */
-		alchemy_gpio_direction_output(209, 1);
-
-		pm_power_off = mirage_power_off;
-		_machine_halt = mirage_power_off;
-		_machine_restart = (void(*)(char *))mips_softreset;
-	}
-#endif
-
-#ifdef CONFIG_MIPS_BOSPORUS
-	pm_power_off = bosporus_power_off;
-	_machine_halt = bosporus_power_off;
-	_machine_restart = (void(*)(char *))mips_softreset;
-#endif
-	au_sync();
-}
-
-static int __init db1x00_init_irq(void)
-{
-#if defined(CONFIG_MIPS_MIRAGE)
-	irq_set_irq_type(AU1500_GPIO7_INT, IRQF_TRIGGER_RISING); /* TS pendown */
-#elif defined(CONFIG_MIPS_DB1550)
-	irq_set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW);  /* CD0# */
-	irq_set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW);  /* CD1# */
-	irq_set_irq_type(AU1550_GPIO3_INT, IRQF_TRIGGER_LOW);  /* CARD0# */
-	irq_set_irq_type(AU1550_GPIO5_INT, IRQF_TRIGGER_LOW);  /* CARD1# */
-	irq_set_irq_type(AU1550_GPIO21_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
-	irq_set_irq_type(AU1550_GPIO22_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
-#elif defined(CONFIG_MIPS_DB1500)
-	irq_set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
-	irq_set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
-	irq_set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
-	irq_set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
-	irq_set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
-	irq_set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
-#elif defined(CONFIG_MIPS_DB1100)
-	irq_set_irq_type(AU1100_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
-	irq_set_irq_type(AU1100_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
-	irq_set_irq_type(AU1100_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
-	irq_set_irq_type(AU1100_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
-	irq_set_irq_type(AU1100_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
-	irq_set_irq_type(AU1100_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
-#elif defined(CONFIG_MIPS_DB1000)
-	irq_set_irq_type(AU1000_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
-	irq_set_irq_type(AU1000_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
-	irq_set_irq_type(AU1000_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
-	irq_set_irq_type(AU1000_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
-	irq_set_irq_type(AU1000_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
-	irq_set_irq_type(AU1000_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
-#endif
-	return 0;
-}
-arch_initcall(db1x00_init_irq);

arch/mips/alchemy/devboards/db1x00/platform.c

@@ -1,316 +0,0 @@
-/*
- * DBAu1xxx board platform device registration
- *
- * Copyright (C) 2009 Manuel Lauss
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-au1x00/au1000_dma.h>
-#include <asm/mach-db1x00/bcsr.h>
-#include "../platform.h"
-
-struct pci_dev;
-
-/* DB1xxx PCMCIA interrupt sources:
- * CD0/1 	GPIO0/3
- * STSCHG0/1	GPIO1/4
- * CARD0/1	GPIO2/5
- * Db1550:	0/1, 21/22, 3/5
- */
-
-#define DB1XXX_HAS_PCMCIA
-#define F_SWAPPED (bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT)
-
-#if defined(CONFIG_MIPS_DB1000)
-#define DB1XXX_PCMCIA_CD0	AU1000_GPIO0_INT
-#define DB1XXX_PCMCIA_STSCHG0	AU1000_GPIO1_INT
-#define DB1XXX_PCMCIA_CARD0	AU1000_GPIO2_INT
-#define DB1XXX_PCMCIA_CD1	AU1000_GPIO3_INT
-#define DB1XXX_PCMCIA_STSCHG1	AU1000_GPIO4_INT
-#define DB1XXX_PCMCIA_CARD1	AU1000_GPIO5_INT
-#define BOARD_FLASH_SIZE	0x02000000 /* 32MB */
-#define BOARD_FLASH_WIDTH	4 /* 32-bits */
-#elif defined(CONFIG_MIPS_DB1100)
-#define DB1XXX_PCMCIA_CD0	AU1100_GPIO0_INT
-#define DB1XXX_PCMCIA_STSCHG0	AU1100_GPIO1_INT
-#define DB1XXX_PCMCIA_CARD0	AU1100_GPIO2_INT
-#define DB1XXX_PCMCIA_CD1	AU1100_GPIO3_INT
-#define DB1XXX_PCMCIA_STSCHG1	AU1100_GPIO4_INT
-#define DB1XXX_PCMCIA_CARD1	AU1100_GPIO5_INT
-#define BOARD_FLASH_SIZE	0x02000000 /* 32MB */
-#define BOARD_FLASH_WIDTH	4 /* 32-bits */
-#elif defined(CONFIG_MIPS_DB1500)
-#define DB1XXX_PCMCIA_CD0	AU1500_GPIO0_INT
-#define DB1XXX_PCMCIA_STSCHG0	AU1500_GPIO1_INT
-#define DB1XXX_PCMCIA_CARD0	AU1500_GPIO2_INT
-#define DB1XXX_PCMCIA_CD1	AU1500_GPIO3_INT
-#define DB1XXX_PCMCIA_STSCHG1	AU1500_GPIO4_INT
-#define DB1XXX_PCMCIA_CARD1	AU1500_GPIO5_INT
-#define BOARD_FLASH_SIZE	0x02000000 /* 32MB */
-#define BOARD_FLASH_WIDTH	4 /* 32-bits */
-#elif defined(CONFIG_MIPS_DB1550)
-#define DB1XXX_PCMCIA_CD0	AU1550_GPIO0_INT
-#define DB1XXX_PCMCIA_STSCHG0	AU1550_GPIO21_INT
-#define DB1XXX_PCMCIA_CARD0	AU1550_GPIO3_INT
-#define DB1XXX_PCMCIA_CD1	AU1550_GPIO1_INT
-#define DB1XXX_PCMCIA_STSCHG1	AU1550_GPIO22_INT
-#define DB1XXX_PCMCIA_CARD1	AU1550_GPIO5_INT
-#define BOARD_FLASH_SIZE	0x08000000 /* 128MB */
-#define BOARD_FLASH_WIDTH	4 /* 32-bits */
-#else
-/* other board: no PCMCIA */
-#undef DB1XXX_HAS_PCMCIA
-#undef F_SWAPPED
-#define F_SWAPPED 0
-#if defined(CONFIG_MIPS_BOSPORUS)
-#define BOARD_FLASH_SIZE	0x01000000 /* 16MB */
-#define BOARD_FLASH_WIDTH	2 /* 16-bits */
-#elif defined(CONFIG_MIPS_MIRAGE)
-#define BOARD_FLASH_SIZE	0x04000000 /* 64MB */
-#define BOARD_FLASH_WIDTH	4 /* 32-bits */
-#endif
-#endif
-
-#ifdef CONFIG_PCI
-#ifdef CONFIG_MIPS_DB1500
-static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
-{
-	if ((slot < 12) || (slot > 13) || pin == 0)
-		return -1;
-	if (slot == 12)
-		return (pin == 1) ? AU1500_PCI_INTA : 0xff;
-	if (slot == 13) {
-		switch (pin) {
-		case 1: return AU1500_PCI_INTA;
-		case 2: return AU1500_PCI_INTB;
-		case 3: return AU1500_PCI_INTC;
-		case 4: return AU1500_PCI_INTD;
-		}
-	}
-	return -1;
-}
-#endif
-
-#ifdef CONFIG_MIPS_DB1550
-static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
-{
-	if ((slot < 11) || (slot > 13) || pin == 0)
-		return -1;
-	if (slot == 11)
-		return (pin == 1) ? AU1550_PCI_INTC : 0xff;
-	if (slot == 12) {
-		switch (pin) {
-		case 1: return AU1550_PCI_INTB;
-		case 2: return AU1550_PCI_INTC;
-		case 3: return AU1550_PCI_INTD;
-		case 4: return AU1550_PCI_INTA;
-		}
-	}
-	if (slot == 13) {
-		switch (pin) {
-		case 1: return AU1550_PCI_INTA;
-		case 2: return AU1550_PCI_INTB;
-		case 3: return AU1550_PCI_INTC;
-		case 4: return AU1550_PCI_INTD;
-		}
-	}
-	return -1;
-}
-#endif
-
-#ifdef CONFIG_MIPS_BOSPORUS
-static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
-{
-	if ((slot < 11) || (slot > 13) || pin == 0)
-		return -1;
-	if (slot == 12)
-		return (pin == 1) ? AU1500_PCI_INTA : 0xff;
-	if (slot == 11) {
-		switch (pin) {
-		case 1: return AU1500_PCI_INTA;
-		case 2: return AU1500_PCI_INTB;
-		default: return 0xff;
-		}
-	}
-	if (slot == 13) {
-		switch (pin) {
-		case 1: return AU1500_PCI_INTA;
-		case 2: return AU1500_PCI_INTB;
-		case 3: return AU1500_PCI_INTC;
-		case 4: return AU1500_PCI_INTD;
-		}
-	}
-	return -1;
-}
-#endif
-
-#ifdef CONFIG_MIPS_MIRAGE
-static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
-{
-	if ((slot < 11) || (slot > 13) || pin == 0)
-		return -1;
-	if (slot == 11)
-		return (pin == 1) ? AU1500_PCI_INTD : 0xff;
-	if (slot == 12)
-		return (pin == 3) ? AU1500_PCI_INTC : 0xff;
-	if (slot == 13) {
-		switch (pin) {
-		case 1: return AU1500_PCI_INTA;
-		case 2: return AU1500_PCI_INTB;
-		default: return 0xff;
-		}
-	}
-	return -1;
-}
-#endif
-
-static struct resource alchemy_pci_host_res[] = {
-	[0] = {
-		.start	= AU1500_PCI_PHYS_ADDR,
-		.end	= AU1500_PCI_PHYS_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct alchemy_pci_platdata db1xxx_pci_pd = {
-	.board_map_irq	= db1xxx_map_pci_irq,
-};
-
-static struct platform_device db1xxx_pci_host_dev = {
-	.dev.platform_data = &db1xxx_pci_pd,
-	.name		= "alchemy-pci",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(alchemy_pci_host_res),
-	.resource	= alchemy_pci_host_res,
-};
-
-static int __init db15x0_pci_init(void)
-{
-	return platform_device_register(&db1xxx_pci_host_dev);
-}
-/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */
-arch_initcall(db15x0_pci_init);
-#endif
-
-#ifdef CONFIG_MIPS_DB1100
-static struct resource au1100_lcd_resources[] = {
-	[0] = {
-		.start	= AU1100_LCD_PHYS_ADDR,
-		.end	= AU1100_LCD_PHYS_ADDR + 0x800 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AU1100_LCD_INT,
-		.end	= AU1100_LCD_INT,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device au1100_lcd_device = {
-	.name		= "au1100-lcd",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &au1100_lcd_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(au1100_lcd_resources),
-	.resource	= au1100_lcd_resources,
-};
-#endif
-
-static struct resource alchemy_ac97c_res[] = {
-	[0] = {
-		.start	= AU1000_AC97_PHYS_ADDR,
-		.end	= AU1000_AC97_PHYS_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMA_ID_AC97C_TX,
-		.end	= DMA_ID_AC97C_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMA_ID_AC97C_RX,
-		.end	= DMA_ID_AC97C_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device alchemy_ac97c_dev = {
-	.name		= "alchemy-ac97c",
-	.id		= -1,
-	.resource	= alchemy_ac97c_res,
-	.num_resources	= ARRAY_SIZE(alchemy_ac97c_res),
-};
-
-static struct platform_device alchemy_ac97c_dma_dev = {
-	.name		= "alchemy-pcm-dma",
-	.id		= 0,
-};
-
-static struct platform_device db1x00_codec_dev = {
-	.name		= "ac97-codec",
-	.id		= -1,
-};
-
-static struct platform_device db1x00_audio_dev = {
-	.name		= "db1000-audio",
-};
-
-static int __init db1xxx_dev_init(void)
-{
-#ifdef DB1XXX_HAS_PCMCIA
-	db1x_register_pcmcia_socket(
-		AU1000_PCMCIA_ATTR_PHYS_ADDR,
-		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
-		AU1000_PCMCIA_MEM_PHYS_ADDR,
-		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
-		AU1000_PCMCIA_IO_PHYS_ADDR,
-		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-		DB1XXX_PCMCIA_CARD0, DB1XXX_PCMCIA_CD0,
-		/*DB1XXX_PCMCIA_STSCHG0*/0, 0, 0);
-
-	db1x_register_pcmcia_socket(
-		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
-		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
-		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004000000,
-		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
-		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004000000,
-		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
-		DB1XXX_PCMCIA_CARD1, DB1XXX_PCMCIA_CD1,
-		/*DB1XXX_PCMCIA_STSCHG1*/0, 0, 1);
-#endif
-#ifdef CONFIG_MIPS_DB1100
-	platform_device_register(&au1100_lcd_device);
-#endif
-	db1x_register_norflash(BOARD_FLASH_SIZE, BOARD_FLASH_WIDTH, F_SWAPPED);
-
-	platform_device_register(&db1x00_codec_dev);
-	platform_device_register(&alchemy_ac97c_dma_dev);
-	platform_device_register(&alchemy_ac97c_dev);
-	platform_device_register(&db1x00_audio_dev);
-
-	return 0;
-}
-device_initcall(db1xxx_dev_init);

arch/mips/alchemy/devboards/pb1000/Makefile

@@ -1,8 +0,0 @@
-#
-#  Copyright 2000, 2008 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc. <source@mvista.com>
-#
-# Makefile for the Alchemy Semiconductor Pb1000 board.
-#
-
-obj-y := board_setup.o

arch/mips/alchemy/devboards/pb1000/board_setup.c

@@ -1,209 +0,0 @@
-/*
- * Copyright 2000, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/pm.h>
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-pb1x00/pb1000.h>
-#include <asm/reboot.h>
-#include <prom.h>
-
-#include "../platform.h"
-
-const char *get_system_type(void)
-{
-	return "Alchemy Pb1000";
-}
-
-static void board_reset(char *c)
-{
-	asm volatile ("jr %0" : : "r" (0xbfc00000));
-}
-
-static void board_power_off(void)
-{
-	while (1)
-		asm volatile (
-		"	.set	mips32					\n"
-		"	wait						\n"
-		"	.set	mips0					\n");
-}
-
-void __init board_setup(void)
-{
-	u32 pin_func, static_cfg0;
-	u32 sys_freqctrl, sys_clksrc;
-	u32 prid = read_c0_prid();
-
-	sys_freqctrl = 0;
-	sys_clksrc = 0;
-
-	/* Set AUX clock to 12 MHz * 8 = 96 MHz */
-	au_writel(8, SYS_AUXPLL);
-	alchemy_gpio1_input_enable();
-	udelay(100);
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-	/* Zero and disable FREQ2 */
-	sys_freqctrl = au_readl(SYS_FREQCTRL0);
-	sys_freqctrl &= ~0xFFF00000;
-	au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
-	/* Zero and disable USBH/USBD clocks */
-	sys_clksrc = au_readl(SYS_CLKSRC);
-	sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
-		        SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
-	au_writel(sys_clksrc, SYS_CLKSRC);
-
-	sys_freqctrl = au_readl(SYS_FREQCTRL0);
-	sys_freqctrl &= ~0xFFF00000;
-
-	sys_clksrc = au_readl(SYS_CLKSRC);
-	sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
-		        SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
-
-	switch (prid & 0x000000FF) {
-	case 0x00: /* DA */
-	case 0x01: /* HA */
-	case 0x02: /* HB */
-		/* CPU core freq to 48 MHz to slow it way down... */
-		au_writel(4, SYS_CPUPLL);
-
-		/*
-		 * Setup 48 MHz FREQ2 from CPUPLL for USB Host
-		 * FRDIV2 = 3 -> div by 8 of 384 MHz -> 48 MHz
-		 */
-		sys_freqctrl |= (3 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2;
-		au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
-		/* CPU core freq to 384 MHz */
-		au_writel(0x20, SYS_CPUPLL);
-
-		printk(KERN_INFO "Au1000: 48 MHz OHCI workaround enabled\n");
-		break;
-
-	default: /* HC and newer */
-		/* FREQ2 = aux / 2 = 48 MHz */
-		sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) |
-				 SYS_FC_FE2 | SYS_FC_FS2;
-		au_writel(sys_freqctrl, SYS_FREQCTRL0);
-		break;
-	}
-
-	/*
-	 * Route 48 MHz FREQ2 into USB Host and/or Device
-	 */
-	sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT;
-	au_writel(sys_clksrc, SYS_CLKSRC);
-
-	/* Configure pins GPIO[14:9] as GPIO */
-	pin_func = au_readl(SYS_PINFUNC) & ~(SYS_PF_UR3 | SYS_PF_USB);
-
-	/* 2nd USB port is USB host */
-	pin_func |= SYS_PF_USB;
-
-	au_writel(pin_func, SYS_PINFUNC);
-
-	alchemy_gpio_direction_input(11);
-	alchemy_gpio_direction_input(13);
-	alchemy_gpio_direction_output(4, 0);
-	alchemy_gpio_direction_output(5, 0);
-#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
-
-	/* Make GPIO 15 an input (for interrupt line) */
-	pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_IRF;
-	/* We don't need I2S, so make it available for GPIO[31:29] */
-	pin_func |= SYS_PF_I2S;
-	au_writel(pin_func, SYS_PINFUNC);
-
-	alchemy_gpio_direction_input(15);
-
-	static_cfg0 = au_readl(MEM_STCFG0) & ~0xc00;
-	au_writel(static_cfg0, MEM_STCFG0);
-
-	/* configure RCE2* for LCD */
-	au_writel(0x00000004, MEM_STCFG2);
-
-	/* MEM_STTIME2 */
-	au_writel(0x09000000, MEM_STTIME2);
-
-	/* Set 32-bit base address decoding for RCE2* */
-	au_writel(0x10003ff0, MEM_STADDR2);
-
-	/*
-	 * PCI CPLD setup
-	 * Expand CE0 to cover PCI
-	 */
-	au_writel(0x11803e40, MEM_STADDR1);
-
-	/* Burst visibility on */
-	au_writel(au_readl(MEM_STCFG0) | 0x1000, MEM_STCFG0);
-
-	au_writel(0x83, MEM_STCFG1);	     /* ewait enabled, flash timing */
-	au_writel(0x33030a10, MEM_STTIME1);  /* slower timing for FPGA */
-
-	/* Setup the static bus controller */
-	au_writel(0x00000002, MEM_STCFG3);  /* type = PCMCIA */
-	au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
-	au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
-
-	/*
-	 * Enable Au1000 BCLK switching - note: sed1356 must not use
-	 * its BCLK (Au1000 LCLK) for any timings
-	 */
-	switch (prid & 0x000000FF) {
-	case 0x00: /* DA */
-	case 0x01: /* HA */
-	case 0x02: /* HB */
-		break;
-	default:  /* HC and newer */
-		/*
-		 * Enable sys bus clock divider when IDLE state or no bus
-		 * activity.
-		 */
-		au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
-		break;
-	}
-
-	pm_power_off = board_power_off;
-	_machine_halt = board_power_off;
-	_machine_restart = board_reset;
-}
-
-static int __init pb1000_init_irq(void)
-{
-	irq_set_irq_type(AU1000_GPIO15_INT, IRQF_TRIGGER_LOW);
-	return 0;
-}
-arch_initcall(pb1000_init_irq);
-
-static int __init pb1000_device_init(void)
-{
-	return db1x_register_norflash(8 * 1024 * 1024, 4, 0);
-}
-device_initcall(pb1000_device_init);

arch/mips/alchemy/devboards/pb1100/board_setup.c → arch/mips/alchemy/devboards/pb1100.c

@@ -1,42 +1,37 @@
 /*
- * Copyright 2002, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
+ * Pb1100 board platform device registration
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
+ * Copyright (C) 2009 Manuel Lauss
  *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
  *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
-#include <linux/delay.h>
 #include <linux/interrupt.h>
-
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-db1x00/bcsr.h>
-
 #include <prom.h>
-
+#include "platform.h"
 
 const char *get_system_type(void)
 {
-	return "Alchemy Pb1100";
+	return "PB1100";
 }
 
 void __init board_setup(void)
@@ -115,13 +110,58 @@ void __init board_setup(void)
 	}
 }
 
-static int __init pb1100_init_irq(void)
+/******************************************************************************/
+
+static struct resource au1100_lcd_resources[] = {
+	[0] = {
+		.start	= AU1100_LCD_PHYS_ADDR,
+		.end	= AU1100_LCD_PHYS_ADDR + 0x800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1100_LCD_INT,
+		.end	= AU1100_LCD_INT,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device au1100_lcd_device = {
+	.name		= "au1100-lcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &au1100_lcd_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(au1100_lcd_resources),
+	.resource	= au1100_lcd_resources,
+};
+
+static int __init pb1100_dev_init(void)
 {
+	int swapped;
+
 	irq_set_irq_type(AU1100_GPIO9_INT, IRQF_TRIGGER_LOW); /* PCCD# */
 	irq_set_irq_type(AU1100_GPIO10_INT, IRQF_TRIGGER_LOW); /* PCSTSCHG# */
 	irq_set_irq_type(AU1100_GPIO11_INT, IRQF_TRIGGER_LOW); /* PCCard# */
 	irq_set_irq_type(AU1100_GPIO13_INT, IRQF_TRIGGER_LOW); /* DC_IRQ# */
 
+	/* PCMCIA. single socket, identical to Pb1500 */
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+		AU1100_GPIO11_INT, AU1100_GPIO9_INT,	 /* card / insert */
+		/*AU1100_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */
+
+	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1000_SWAPBOOT;
+	db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
+	platform_device_register(&au1100_lcd_device);
+
 	return 0;
 }
-arch_initcall(pb1100_init_irq);
+device_initcall(pb1100_dev_init);

arch/mips/alchemy/devboards/pb1100/Makefile

@@ -1,8 +0,0 @@
-#
-#  Copyright 2000, 2001, 2008 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc. <source@mvista.com>
-#
-# Makefile for the Alchemy Semiconductor Pb1100 board.
-#
-
-obj-y := board_setup.o platform.o

arch/mips/alchemy/devboards/pb1100/platform.c

@@ -1,77 +0,0 @@
-/*
- * Pb1100 board platform device registration
- *
- * Copyright (C) 2009 Manuel Lauss
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-db1x00/bcsr.h>
-
-#include "../platform.h"
-
-static struct resource au1100_lcd_resources[] = {
-	[0] = {
-		.start	= AU1100_LCD_PHYS_ADDR,
-		.end	= AU1100_LCD_PHYS_ADDR + 0x800 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AU1100_LCD_INT,
-		.end	= AU1100_LCD_INT,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device au1100_lcd_device = {
-	.name		= "au1100-lcd",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &au1100_lcd_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(au1100_lcd_resources),
-	.resource	= au1100_lcd_resources,
-};
-
-static int __init pb1100_dev_init(void)
-{
-	int swapped;
-
-	/* PCMCIA. single socket, identical to Pb1500 */
-	db1x_register_pcmcia_socket(
-		AU1000_PCMCIA_ATTR_PHYS_ADDR,
-		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
-		AU1000_PCMCIA_MEM_PHYS_ADDR,
-		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
-		AU1000_PCMCIA_IO_PHYS_ADDR,
-		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-		AU1100_GPIO11_INT, AU1100_GPIO9_INT,	 /* card / insert */
-		/*AU1100_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */
-
-	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1000_SWAPBOOT;
-	db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
-	platform_device_register(&au1100_lcd_device);
-
-	return 0;
-}
-device_initcall(pb1100_dev_init);

arch/mips/alchemy/devboards/pb1200/Makefile

@@ -1,5 +0,0 @@
-#
-# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards.
-#
-
-obj-y := board_setup.o platform.o

arch/mips/alchemy/devboards/pb1200/board_setup.c

@@ -1,174 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Alchemy Pb1200/Db1200 board setup.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-db1x00/bcsr.h>
-
-#ifdef CONFIG_MIPS_PB1200
-#include <asm/mach-pb1x00/pb1200.h>
-#endif
-
-#ifdef CONFIG_MIPS_DB1200
-#include <asm/mach-db1x00/db1200.h>
-#define PB1200_INT_BEGIN DB1200_INT_BEGIN
-#define PB1200_INT_END DB1200_INT_END
-#endif
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
-	return "Alchemy Pb1200";
-}
-
-void __init board_setup(void)
-{
-	printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
-	bcsr_init(PB1200_BCSR_PHYS_ADDR,
-		  PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS);
-
-#if 0
-	{
-		u32 pin_func;
-
-		/*
-		 * Enable PSC1 SYNC for AC97.  Normaly done in audio driver,
-		 * but it is board specific code, so put it here.
-		 */
-		pin_func = au_readl(SYS_PINFUNC);
-		au_sync();
-		pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
-		au_writel(pin_func, SYS_PINFUNC);
-
-		au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */
-		au_sync();
-	}
-#endif
-
-#if defined(CONFIG_I2C_AU1550)
-	{
-		u32 freq0, clksrc;
-		u32 pin_func;
-
-		/* Select SMBus in CPLD */
-		bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
-
-		pin_func = au_readl(SYS_PINFUNC);
-		au_sync();
-		pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
-		/* Set GPIOs correctly */
-		pin_func |= 2 << 17;
-		au_writel(pin_func, SYS_PINFUNC);
-		au_sync();
-
-		/* The I2C driver depends on 50 MHz clock */
-		freq0 = au_readl(SYS_FREQCTRL0);
-		au_sync();
-		freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
-		freq0 |= 3 << SYS_FC_FRDIV1_BIT;
-		/* 396 MHz / (3 + 1) * 2 == 49.5 MHz */
-		au_writel(freq0, SYS_FREQCTRL0);
-		au_sync();
-		freq0 |= SYS_FC_FE1;
-		au_writel(freq0, SYS_FREQCTRL0);
-		au_sync();
-
-		clksrc = au_readl(SYS_CLKSRC);
-		au_sync();
-		clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK);
-		/* Bit 22 is EXTCLK0 for PSC0 */
-		clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT;
-		au_writel(clksrc, SYS_CLKSRC);
-		au_sync();
-	}
-#endif
-
-	/*
-	 * The Pb1200 development board uses external MUX for PSC0 to
-	 * support SMB/SPI. bcsr_resets bit 12: 0=SMB 1=SPI
-	 */
-#ifdef CONFIG_I2C_AU1550
-	bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
-#endif
-	au_sync();
-}
-
-static int __init pb1200_init_irq(void)
-{
-	/* We have a problem with CPLD rev 3. */
-	if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) {
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
-		printk(KERN_ERR "updated to latest revision. This software will\n");
-		printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		panic("Game over.  Your score is 0.");
-	}
-
-	irq_set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
-	bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1200_GPIO7_INT);
-
-	return 0;
-}
-arch_initcall(pb1200_init_irq);
-
-
-int board_au1200fb_panel(void)
-{
-	return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;
-}
-
-int board_au1200fb_panel_init(void)
-{
-	/* Apply power */
-	bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
-				BCSR_BOARD_LCDBL);
-	/* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */
-	return 0;
-}
-
-int board_au1200fb_panel_shutdown(void)
-{
-	/* Remove power */
-	bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
-			     BCSR_BOARD_LCDBL, 0);
-	/* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */
-	return 0;
-}

arch/mips/alchemy/devboards/pb1200/platform.c

@@ -1,339 +0,0 @@
-/*
- * Pb1200/DBAu1200 board platform device registration
- *
- * Copyright (C) 2008 MontaVista Software Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-au1x00/au1100_mmc.h>
-#include <asm/mach-au1x00/au1xxx_dbdma.h>
-#include <asm/mach-db1x00/bcsr.h>
-#include <asm/mach-pb1x00/pb1200.h>
-
-#include "../platform.h"
-
-static int mmc_activity;
-
-static void pb1200mmc0_set_power(void *mmc_host, int state)
-{
-	if (state)
-		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR);
-	else
-		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0);
-
-	msleep(1);
-}
-
-static int pb1200mmc0_card_readonly(void *mmc_host)
-{
-	return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0;
-}
-
-static int pb1200mmc0_card_inserted(void *mmc_host)
-{
-	return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0;
-}
-
-static void pb1200_mmcled_set(struct led_classdev *led,
-			enum led_brightness brightness)
-{
-	if (brightness != LED_OFF) {
-		if (++mmc_activity == 1)
-			bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
-	} else {
-		if (--mmc_activity == 0)
-			bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
-	}
-}
-
-static struct led_classdev pb1200mmc_led = {
-	.brightness_set	= pb1200_mmcled_set,
-};
-
-static void pb1200mmc1_set_power(void *mmc_host, int state)
-{
-	if (state)
-		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR);
-	else
-		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0);
-
-	msleep(1);
-}
-
-static int pb1200mmc1_card_readonly(void *mmc_host)
-{
-	return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0;
-}
-
-static int pb1200mmc1_card_inserted(void *mmc_host)
-{
-	return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0;
-}
-
-static struct au1xmmc_platform_data pb1200mmc_platdata[2] = {
-	[0] = {
-		.set_power	= pb1200mmc0_set_power,
-		.card_inserted	= pb1200mmc0_card_inserted,
-		.card_readonly	= pb1200mmc0_card_readonly,
-		.cd_setup	= NULL,		/* use poll-timer in driver */
-		.led		= &pb1200mmc_led,
-	},
-	[1] = {
-		.set_power	= pb1200mmc1_set_power,
-		.card_inserted	= pb1200mmc1_card_inserted,
-		.card_readonly	= pb1200mmc1_card_readonly,
-		.cd_setup	= NULL,		/* use poll-timer in driver */
-		.led		= &pb1200mmc_led,
-	},
-};
-
-static u64 au1xxx_mmc_dmamask =  DMA_BIT_MASK(32);
-
-static struct resource au1200_mmc0_res[] = {
-	[0] = {
-		.start	= AU1100_SD0_PHYS_ADDR,
-		.end	= AU1100_SD0_PHYS_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AU1200_SD_INT,
-		.end	= AU1200_SD_INT,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= AU1200_DSCR_CMD0_SDMS_TX0,
-		.end	= AU1200_DSCR_CMD0_SDMS_TX0,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= AU1200_DSCR_CMD0_SDMS_RX0,
-		.end	= AU1200_DSCR_CMD0_SDMS_RX0,
-		.flags	= IORESOURCE_DMA,
-	}
-};
-
-static struct platform_device pb1200_mmc0_dev = {
-	.name		= "au1xxx-mmc",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &au1xxx_mmc_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &pb1200mmc_platdata[0],
-	},
-	.num_resources	= ARRAY_SIZE(au1200_mmc0_res),
-	.resource	= au1200_mmc0_res,
-};
-
-static struct resource au1200_mmc1_res[] = {
-	[0] = {
-		.start	= AU1100_SD1_PHYS_ADDR,
-		.end	= AU1100_SD1_PHYS_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AU1200_SD_INT,
-		.end	= AU1200_SD_INT,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= AU1200_DSCR_CMD0_SDMS_TX1,
-		.end	= AU1200_DSCR_CMD0_SDMS_TX1,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= AU1200_DSCR_CMD0_SDMS_RX1,
-		.end	= AU1200_DSCR_CMD0_SDMS_RX1,
-		.flags	= IORESOURCE_DMA,
-	}
-};
-
-static struct platform_device pb1200_mmc1_dev = {
-	.name		= "au1xxx-mmc",
-	.id		= 1,
-	.dev = {
-		.dma_mask		= &au1xxx_mmc_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &pb1200mmc_platdata[1],
-	},
-	.num_resources	= ARRAY_SIZE(au1200_mmc1_res),
-	.resource	= au1200_mmc1_res,
-};
-
-
-static struct resource ide_resources[] = {
-	[0] = {
-		.start	= IDE_PHYS_ADDR,
-		.end 	= IDE_PHYS_ADDR + IDE_PHYS_LEN - 1,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
-		.start	= IDE_INT,
-		.end	= IDE_INT,
-		.flags	= IORESOURCE_IRQ
-	},
-	[2] = {
-		.start	= AU1200_DSCR_CMD0_DMA_REQ1,
-		.end	= AU1200_DSCR_CMD0_DMA_REQ1,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static u64 ide_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device ide_device = {
-	.name		= "au1200-ide",
-	.id		= 0,
-	.dev = {
-		.dma_mask 		= &ide_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(ide_resources),
-	.resource	= ide_resources
-};
-
-static struct smc91x_platdata smc_data = {
-	.flags	= SMC91X_NOWAIT | SMC91X_USE_16BIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource smc91c111_resources[] = {
-	[0] = {
-		.name	= "smc91x-regs",
-		.start	= SMC91C111_PHYS_ADDR,
-		.end	= SMC91C111_PHYS_ADDR + 0xf,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
-		.start	= SMC91C111_INT,
-		.end	= SMC91C111_INT,
-		.flags	= IORESOURCE_IRQ
-	},
-};
-
-static struct platform_device smc91c111_device = {
-	.dev	= {
-		.platform_data	= &smc_data,
-	},
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc91c111_resources),
-	.resource	= smc91c111_resources
-};
-
-static struct resource au1200_psc0_res[] = {
-	[0] = {
-		.start	= AU1550_PSC0_PHYS_ADDR,
-		.end	= AU1550_PSC0_PHYS_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AU1200_PSC0_INT,
-		.end	= AU1200_PSC0_INT,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= AU1200_DSCR_CMD0_PSC0_TX,
-		.end	= AU1200_DSCR_CMD0_PSC0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= AU1200_DSCR_CMD0_PSC0_RX,
-		.end	= AU1200_DSCR_CMD0_PSC0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device pb1200_i2c_dev = {
-	.name		= "au1xpsc_smbus",
-	.id		= 0,	/* bus number */
-	.num_resources	= ARRAY_SIZE(au1200_psc0_res),
-	.resource	= au1200_psc0_res,
-};
-
-static struct resource au1200_lcd_res[] = {
-	[0] = {
-		.start	= AU1200_LCD_PHYS_ADDR,
-		.end	= AU1200_LCD_PHYS_ADDR + 0x800 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AU1200_LCD_INT,
-		.end	= AU1200_LCD_INT,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device au1200_lcd_dev = {
-	.name		= "au1200-lcd",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &au1200_lcd_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(au1200_lcd_res),
-	.resource	= au1200_lcd_res,
-};
-
-static struct platform_device *board_platform_devices[] __initdata = {
-	&ide_device,
-	&smc91c111_device,
-	&pb1200_i2c_dev,
-	&pb1200_mmc0_dev,
-	&pb1200_mmc1_dev,
-	&au1200_lcd_dev,
-};
-
-static int __init board_register_devices(void)
-{
-	int swapped;
-
-	db1x_register_pcmcia_socket(
-		AU1000_PCMCIA_ATTR_PHYS_ADDR,
-		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
-		AU1000_PCMCIA_MEM_PHYS_ADDR,
-		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
-		AU1000_PCMCIA_IO_PHYS_ADDR,
-		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-		PB1200_PC0_INT, PB1200_PC0_INSERT_INT,
-		/*PB1200_PC0_STSCHG_INT*/0, PB1200_PC0_EJECT_INT, 0);
-
-	db1x_register_pcmcia_socket(
-		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
-		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
-		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x008000000,
-		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x008400000 - 1,
-		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x008000000,
-		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x008010000 - 1,
-		PB1200_PC1_INT, PB1200_PC1_INSERT_INT,
-		/*PB1200_PC1_STSCHG_INT*/0, PB1200_PC1_EJECT_INT, 1);
-
-	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1200_SWAPBOOT;
-	db1x_register_norflash(128 * 1024 * 1024, 2, swapped);
-
-	return platform_add_devices(board_platform_devices,
-				    ARRAY_SIZE(board_platform_devices));
-}
-device_initcall(board_register_devices);

arch/mips/alchemy/devboards/pb1500/board_setup.c → arch/mips/alchemy/devboards/pb1500.c

@@ -1,41 +1,37 @@
 /*
- * Copyright 2000, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
+ * Pb1500 board support.
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
+ * Copyright (C) 2009 Manuel Lauss
  *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
  *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-
+#include <linux/platform_device.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-db1x00/bcsr.h>
-
 #include <prom.h>
+#include "platform.h"
 
 const char *get_system_type(void)
 {
-	return "Alchemy Pb1500";
+	return "PB1500";
 }
 
 void __init board_setup(void)
@@ -123,17 +119,80 @@ void __init board_setup(void)
 	}
 }
 
-static int __init pb1500_init_irq(void)
+/******************************************************************************/
+
+static int pb1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
 {
-	irq_set_irq_type(AU1500_GPIO9_INT, IRQF_TRIGGER_LOW);   /* CD0# */
-	irq_set_irq_type(AU1500_GPIO10_INT, IRQF_TRIGGER_LOW);  /* CARD0 */
-	irq_set_irq_type(AU1500_GPIO11_INT, IRQF_TRIGGER_LOW);  /* STSCHG0# */
+	if ((slot < 12) || (slot > 13) || pin == 0)
+		return -1;
+	if (slot == 12)
+		return (pin == 1) ? AU1500_PCI_INTA : 0xff;
+	if (slot == 13) {
+		switch (pin) {
+		case 1: return AU1500_PCI_INTA;
+		case 2: return AU1500_PCI_INTB;
+		case 3: return AU1500_PCI_INTC;
+		case 4: return AU1500_PCI_INTD;
+		}
+	}
+	return -1;
+}
+
+static struct resource alchemy_pci_host_res[] = {
+	[0] = {
+		.start	= AU1500_PCI_PHYS_ADDR,
+		.end	= AU1500_PCI_PHYS_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct alchemy_pci_platdata pb1500_pci_pd = {
+	.board_map_irq	= pb1500_map_pci_irq,
+	.pci_cfg_set	= PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
+			  PCI_CONFIG_CH |
+#if defined(__MIPSEB__)
+			  PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
+#else
+			  0,
+#endif
+};
+
+static struct platform_device pb1500_pci_host = {
+	.dev.platform_data = &pb1500_pci_pd,
+	.name		= "alchemy-pci",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(alchemy_pci_host_res),
+	.resource	= alchemy_pci_host_res,
+};
+
+static int __init pb1500_dev_init(void)
+{
+	int swapped;
+
+	irq_set_irq_type(AU1500_GPIO9_INT,   IRQF_TRIGGER_LOW);   /* CD0# */
+	irq_set_irq_type(AU1500_GPIO10_INT,  IRQF_TRIGGER_LOW);  /* CARD0 */
+	irq_set_irq_type(AU1500_GPIO11_INT,  IRQF_TRIGGER_LOW);  /* STSCHG0# */
 	irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
 	irq_set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
 	irq_set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
 	irq_set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
 	irq_set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
 
+	/* PCMCIA. single socket, identical to Pb1100 */
+	db1x_register_pcmcia_socket(
+		AU1000_PCMCIA_ATTR_PHYS_ADDR,
+		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+		AU1000_PCMCIA_MEM_PHYS_ADDR,
+		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+		AU1000_PCMCIA_IO_PHYS_ADDR,
+		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+		AU1500_GPIO11_INT, AU1500_GPIO9_INT,	 /* card / insert */
+		/*AU1500_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */
+
+	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1000_SWAPBOOT;
+	db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
+	platform_device_register(&pb1500_pci_host);
+
 	return 0;
 }
-arch_initcall(pb1500_init_irq);
+arch_initcall(pb1500_dev_init);

arch/mips/alchemy/devboards/pb1500/Makefile

@@ -1,8 +0,0 @@
-#
-#  Copyright 2000, 2001, 2008 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc. <source@mvista.com>
-#
-# Makefile for the Alchemy Semiconductor Pb1500 board.
-#
-
-obj-y := board_setup.o platform.o

arch/mips/alchemy/devboards/pb1500/platform.c

@@ -1,94 +0,0 @@
-/*
- * Pb1500 board platform device registration
- *
- * Copyright (C) 2009 Manuel Lauss
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-db1x00/bcsr.h>
-
-#include "../platform.h"
-
-static int pb1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
-{
-	if ((slot < 12) || (slot > 13) || pin == 0)
-		return -1;
-	if (slot == 12)
-		return (pin == 1) ? AU1500_PCI_INTA : 0xff;
-	if (slot == 13) {
-		switch (pin) {
-		case 1: return AU1500_PCI_INTA;
-		case 2: return AU1500_PCI_INTB;
-		case 3: return AU1500_PCI_INTC;
-		case 4: return AU1500_PCI_INTD;
-		}
-	}
-	return -1;
-}
-
-static struct resource alchemy_pci_host_res[] = {
-	[0] = {
-		.start	= AU1500_PCI_PHYS_ADDR,
-		.end	= AU1500_PCI_PHYS_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct alchemy_pci_platdata pb1500_pci_pd = {
-	.board_map_irq	= pb1500_map_pci_irq,
-	.pci_cfg_set	= PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
-			  PCI_CONFIG_CH |
-#if defined(__MIPSEB__)
-			  PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
-#else
-			  0,
-#endif
-};
-
-static struct platform_device pb1500_pci_host = {
-	.dev.platform_data = &pb1500_pci_pd,
-	.name		= "alchemy-pci",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(alchemy_pci_host_res),
-	.resource	= alchemy_pci_host_res,
-};
-
-static int __init pb1500_dev_init(void)
-{
-	int swapped;
-
-	/* PCMCIA. single socket, identical to Pb1100 */
-	db1x_register_pcmcia_socket(
-		AU1000_PCMCIA_ATTR_PHYS_ADDR,
-		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
-		AU1000_PCMCIA_MEM_PHYS_ADDR,
-		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
-		AU1000_PCMCIA_IO_PHYS_ADDR,
-		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-		AU1500_GPIO11_INT, AU1500_GPIO9_INT,	 /* card / insert */
-		/*AU1500_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */
-
-	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1000_SWAPBOOT;
-	db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
-	platform_device_register(&pb1500_pci_host);
-
-	return 0;
-}
-arch_initcall(pb1500_dev_init);

arch/mips/alchemy/devboards/pb1550/platform.c → arch/mips/alchemy/devboards/pb1550.c

@@ -1,7 +1,7 @@
 /*
- * Pb1550 board platform device registration
+ * Pb1550 board support.
  *
- * Copyright (C) 2009 Manuel Lauss
+ * Copyright (C) 2009-2011 Manuel Lauss
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,13 +20,44 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
-#include <asm/mach-pb1x00/pb1550.h>
+#include <asm/mach-au1x00/au1550nd.h>
+#include <asm/mach-au1x00/gpio.h>
 #include <asm/mach-db1x00/bcsr.h>
+#include "platform.h"
 
-#include "../platform.h"
+const char *get_system_type(void)
+{
+	return "PB1550";
+}
+
+void __init board_setup(void)
+{
+	u32 pin_func;
+
+	bcsr_init(PB1550_BCSR_PHYS_ADDR,
+		  PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS);
+
+	alchemy_gpio2_enable();
+
+	/*
+	 * Enable PSC1 SYNC for AC'97.  Normaly done in audio driver,
+	 * but it is board specific code, so put it here.
+	 */
+	pin_func = au_readl(SYS_PINFUNC);
+	au_sync();
+	pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
+	au_writel(pin_func, SYS_PINFUNC);
+
+	bcsr_write(BCSR_PCMCIA, 0);	/* turn off PCMCIA power */
+
+	printk(KERN_INFO "AMD Alchemy Pb1550 Board\n");
+}
+
+/******************************************************************************/
 
 static int pb1550_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
 {
@@ -101,10 +132,79 @@ static struct platform_device pb1550_i2c_dev = {
 	.resource	= au1550_psc2_res,
 };
 
+static struct mtd_partition pb1550_nand_parts[] = {
+	[0] = {
+		.name	= "NAND FS 0",
+		.offset	= 0,
+		.size	= 8 * 1024 * 1024,
+	},
+	[1] = {
+		.name	= "NAND FS 1",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct au1550nd_platdata pb1550_nand_pd = {
+	.parts		= pb1550_nand_parts,
+	.num_parts	= ARRAY_SIZE(pb1550_nand_parts),
+	.devwidth	= 0,	/* x8 NAND default, needs fixing up */
+};
+
+static struct resource pb1550_nand_res[] = {
+	[0] = {
+		.start	= 0x20000000,
+		.end	= 0x20000fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device pb1550_nand_dev = {
+	.name		= "au1550-nand",
+	.id		= -1,
+	.resource	= pb1550_nand_res,
+	.num_resources	= ARRAY_SIZE(pb1550_nand_res),
+	.dev		= {
+		.platform_data	= &pb1550_nand_pd,
+	},
+};
+
+static void __init pb1550_nand_setup(void)
+{
+	int boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) |
+			    ((bcsr_read(BCSR_STATUS) >> 6) & 0x1);
+
+	switch (boot_swapboot) {
+	case 0:
+	case 2:
+	case 8:
+	case 0xC:
+	case 0xD:
+		/* x16 NAND Flash */
+		pb1550_nand_pd.devwidth = 1;
+		/* fallthrough */
+	case 1:
+	case 9:
+	case 3:
+	case 0xE:
+	case 0xF:
+		/* x8 NAND, already set up */
+		platform_device_register(&pb1550_nand_dev);
+	}
+}
+
 static int __init pb1550_dev_init(void)
 {
 	int swapped;
 
+	irq_set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW);
+	irq_set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW);
+	irq_set_irq_type(AU1550_GPIO201_205_INT, IRQF_TRIGGER_HIGH);
+
+	/* enable both PCMCIA card irqs in the shared line */
+	alchemy_gpio2_enable_int(201);
+	alchemy_gpio2_enable_int(202);
+
 	/* Pb1550, like all others, also has statuschange irqs; however they're
 	* wired up on one of the Au1550's shared GPIO201_205 line, which also
 	* services the PCMCIA card interrupts.  So we ignore statuschange and
@@ -130,6 +230,10 @@ static int __init pb1550_dev_init(void)
 		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x008010000 - 1,
 		AU1550_GPIO201_205_INT, AU1550_GPIO1_INT, 0, 0, 1);
 
+	/* NAND setup */
+	gpio_direction_input(206);	/* GPIO206 high */
+	pb1550_nand_setup();
+
 	swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_PB1550_SWAPBOOT;
 	db1x_register_norflash(128 * 1024 * 1024, 4, swapped);
 	platform_device_register(&pb1550_pci_host);

arch/mips/alchemy/devboards/pb1550/Makefile

@@ -1,8 +0,0 @@
-#
-#  Copyright 2000, 2008 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc. <source@mvista.com>
-#
-# Makefile for the Alchemy Semiconductor Pb1550 board.
-#
-
-obj-y := board_setup.o platform.o

arch/mips/alchemy/devboards/pb1550/board_setup.c

@@ -1,80 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Alchemy Pb1550 board setup.
- *
- * Copyright 2000, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-pb1x00/pb1550.h>
-#include <asm/mach-db1x00/bcsr.h>
-#include <asm/mach-au1x00/gpio.h>
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
-	return "Alchemy Pb1550";
-}
-
-void __init board_setup(void)
-{
-	u32 pin_func;
-
-	bcsr_init(PB1550_BCSR_PHYS_ADDR,
-		  PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS);
-
-	alchemy_gpio2_enable();
-
-	/*
-	 * Enable PSC1 SYNC for AC'97.  Normaly done in audio driver,
-	 * but it is board specific code, so put it here.
-	 */
-	pin_func = au_readl(SYS_PINFUNC);
-	au_sync();
-	pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
-	au_writel(pin_func, SYS_PINFUNC);
-
-	bcsr_write(BCSR_PCMCIA, 0);	/* turn off PCMCIA power */
-
-	printk(KERN_INFO "AMD Alchemy Pb1550 Board\n");
-}
-
-static int __init pb1550_init_irq(void)
-{
-	irq_set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1550_GPIO201_205_INT, IRQF_TRIGGER_HIGH);
-
-	/* enable both PCMCIA card irqs in the shared line */
-	alchemy_gpio2_enable_int(201);
-	alchemy_gpio2_enable_int(202);
-
-	return 0;
-}
-arch_initcall(pb1550_init_irq);

arch/mips/alchemy/devboards/platform.c

@@ -13,6 +13,13 @@
 #include <asm/reboot.h>
 #include <asm/mach-db1x00/bcsr.h>
 
+
+static struct platform_device db1x00_rtc_dev = {
+	.name	= "rtc-au1xxx",
+	.id	= -1,
+};
+
+
 static void db1x_power_off(void)
 {
 	bcsr_write(BCSR_RESETS, 0);
@@ -25,7 +32,7 @@ static void db1x_reset(char *c)
 	bcsr_write(BCSR_SYSTEM, 0);
 }
 
-static int __init db1x_poweroff_setup(void)
+static int __init db1x_late_setup(void)
 {
 	if (!pm_power_off)
 		pm_power_off = db1x_power_off;
@@ -34,9 +41,11 @@ static int __init db1x_poweroff_setup(void)
 	if (!_machine_restart)
 		_machine_restart = db1x_reset;
 
+	platform_device_register(&db1x00_rtc_dev);
+
 	return 0;
 }
-late_initcall(db1x_poweroff_setup);
+device_initcall(db1x_late_setup);
 
 /* register a pcmcia socket */
 int __init db1x_register_pcmcia_socket(phys_addr_t pcmcia_attr_start,

arch/mips/alchemy/devboards/prom.c

@@ -33,10 +33,9 @@
 #include <asm/mach-au1x00/au1000.h>
 #include <prom.h>
 
-#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_DB1000) || \
-    defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_DB1100) || \
-    defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_DB1500) || \
-    defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE)
+#if defined(CONFIG_MIPS_DB1000) || \
+    defined(CONFIG_MIPS_PB1100) || \
+    defined(CONFIG_MIPS_PB1500)
 #define ALCHEMY_BOARD_DEFAULT_MEMSIZE	0x04000000
 
 #else	/* Au1550/Au1200-based develboards */
@@ -62,5 +61,9 @@ void __init prom_init(void)
 
 void prom_putchar(unsigned char c)
 {
+#ifdef CONFIG_MIPS_DB1300
+	alchemy_uart_putchar(AU1300_UART2_PHYS_ADDR, c);
+#else
 	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
+#endif
 }

arch/mips/alchemy/gpr/Makefile

@@ -1,8 +0,0 @@
-#
-#  Copyright 2003 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc. <source@mvista.com>
-#
-# Makefile for Trapeze ITS GPR board.
-#
-
-obj-y += board_setup.o init.o platform.o

arch/mips/alchemy/gpr/board_setup.c

@@ -1,75 +0,0 @@
-/*
- * Copyright 2010 Wolfgang Grandegger <wg@denx.de>
- *
- * Copyright 2000-2003, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/pm.h>
-
-#include <asm/reboot.h>
-#include <asm/mach-au1x00/au1000.h>
-
-#include <prom.h>
-
-static void gpr_reset(char *c)
-{
-	/* switch System-LED to orange (red# and green# on) */
-	alchemy_gpio_direction_output(4, 0);
-	alchemy_gpio_direction_output(5, 0);
-
-	/* trigger watchdog to reset board in 200ms */
-	printk(KERN_EMERG "Triggering watchdog soft reset...\n");
-	raw_local_irq_disable();
-	alchemy_gpio_direction_output(1, 0);
-	udelay(1);
-	alchemy_gpio_set_value(1, 1);
-	while (1)
-		cpu_wait();
-}
-
-static void gpr_power_off(void)
-{
-	while (1)
-		cpu_wait();
-}
-
-void __init board_setup(void)
-{
-	printk(KERN_INFO "Trapeze ITS GPR board\n");
-
-	pm_power_off = gpr_power_off;
-	_machine_halt = gpr_power_off;
-	_machine_restart = gpr_reset;
-
-	/* Enable UART1/3 */
-	alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
-	alchemy_uart_enable(AU1000_UART1_PHYS_ADDR);
-
-	/* Take away Reset of UMTS-card */
-	alchemy_gpio_direction_output(215, 1);
-}

arch/mips/alchemy/gpr/init.c

@@ -1,63 +0,0 @@
-/*
- * Copyright 2010 Wolfgang Grandegger <wg@denx.de>
- *
- * Copyright 2003, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <asm/bootinfo.h>
-#include <asm/mach-au1x00/au1000.h>
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
-	return "GPR";
-}
-
-void __init prom_init(void)
-{
-	unsigned char *memsize_str;
-	unsigned long memsize;
-
-	prom_argc = fw_arg0;
-	prom_argv = (char **)fw_arg1;
-	prom_envp = (char **)fw_arg2;
-
-	prom_init_cmdline();
-
-	memsize_str = prom_getenv("memsize");
-	if (!memsize_str)
-		memsize = 0x04000000;
-	else
-		strict_strtoul(memsize_str, 0, &memsize);
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
-
-void prom_putchar(unsigned char c)
-{
-	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
-}

arch/mips/alchemy/mtx-1/Makefile

@@ -1,9 +0,0 @@
-#
-#  Copyright 2003 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc. <source@mvista.com>
-#       Bruno Randolf <bruno.randolf@4g-systems.biz>
-#
-# Makefile for 4G Systems MTX-1 board.
-#
-
-obj-y += init.o board_setup.o platform.o

arch/mips/alchemy/mtx-1/board_setup.c

@@ -1,94 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	4G Systems MTX-1 board setup.
- *
- * Copyright 2003, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *         Bruno Randolf <bruno.randolf@4g-systems.biz>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/pm.h>
-
-#include <asm/reboot.h>
-#include <asm/mach-au1x00/au1000.h>
-
-#include <prom.h>
-
-static void mtx1_reset(char *c)
-{
-	/* Jump to the reset vector */
-	__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-}
-
-static void mtx1_power_off(void)
-{
-	while (1)
-		asm volatile (
-		"	.set	mips32					\n"
-		"	wait						\n"
-		"	.set	mips0					\n");
-}
-
-void __init board_setup(void)
-{
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-	/* Enable USB power switch */
-	alchemy_gpio_direction_output(204, 0);
-#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
-
-	/* Initialize sys_pinfunc */
-	au_writel(SYS_PF_NI2, SYS_PINFUNC);
-
-	/* Initialize GPIO */
-	au_writel(~0, KSEG1ADDR(AU1000_SYS_PHYS_ADDR) + SYS_TRIOUTCLR);
-	alchemy_gpio_direction_output(0, 0);	/* Disable M66EN (PCI 66MHz) */
-	alchemy_gpio_direction_output(3, 1);	/* Disable PCI CLKRUN# */
-	alchemy_gpio_direction_output(1, 1);	/* Enable EXT_IO3 */
-	alchemy_gpio_direction_output(5, 0);	/* Disable eth PHY TX_ER */
-
-	/* Enable LED and set it to green */
-	alchemy_gpio_direction_output(211, 1);	/* green on */
-	alchemy_gpio_direction_output(212, 0);	/* red off */
-
-	pm_power_off = mtx1_power_off;
-	_machine_halt = mtx1_power_off;
-	_machine_restart = mtx1_reset;
-
-	printk(KERN_INFO "4G Systems MTX-1 Board\n");
-}
-
-static int __init mtx1_init_irq(void)
-{
-	irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
-	irq_set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
-
-	return 0;
-}
-arch_initcall(mtx1_init_irq);

arch/mips/alchemy/mtx-1/init.c

@@ -1,66 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	4G Systems MTX-1 board setup
- *
- * Copyright 2003, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *         Bruno Randolf <bruno.randolf@4g-systems.biz>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/mach-au1x00/au1000.h>
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
-	return "MTX-1";
-}
-
-void __init prom_init(void)
-{
-	unsigned char *memsize_str;
-	unsigned long memsize;
-
-	prom_argc = fw_arg0;
-	prom_argv = (char **)fw_arg1;
-	prom_envp = (char **)fw_arg2;
-
-	prom_init_cmdline();
-
-	memsize_str = prom_getenv("memsize");
-	if (!memsize_str)
-		memsize = 0x04000000;
-	else
-		strict_strtoul(memsize_str, 0, &memsize);
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
-
-void prom_putchar(unsigned char c)
-{
-	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
-}

arch/mips/alchemy/xxs1500/Makefile

@@ -1,8 +0,0 @@
-#
-#  Copyright 2003 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc. <source@mvista.com>
-#
-# Makefile for MyCable XXS1500 board.
-#
-
-obj-y += init.o board_setup.o platform.o

arch/mips/alchemy/xxs1500/board_setup.c

@@ -1,93 +0,0 @@
-/*
- * Copyright 2000-2003, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/pm.h>
-
-#include <asm/reboot.h>
-#include <asm/mach-au1x00/au1000.h>
-
-#include <prom.h>
-
-static void xxs1500_reset(char *c)
-{
-	/* Jump to the reset vector */
-	__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-}
-
-static void xxs1500_power_off(void)
-{
-	while (1)
-		asm volatile (
-		"	.set	mips32					\n"
-		"	wait						\n"
-		"	.set	mips0					\n");
-}
-
-void __init board_setup(void)
-{
-	u32 pin_func;
-
-	pm_power_off = xxs1500_power_off;
-	_machine_halt = xxs1500_power_off;
-	_machine_restart = xxs1500_reset;
-
-	alchemy_gpio1_input_enable();
-	alchemy_gpio2_enable();
-
-	/* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */
-	pin_func  = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
-	pin_func |= SYS_PF_UR3;
-	au_writel(pin_func, SYS_PINFUNC);
-
-	/* Enable UART */
-	alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
-	/* Enable DTR (MCR bit 0) = USB power up */
-	__raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18));
-	wmb();
-}
-
-static int __init xxs1500_init_irq(void)
-{
-	irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
-	irq_set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1500_GPIO207_INT, IRQF_TRIGGER_LOW);
-
-	irq_set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW);
-	irq_set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* CF irq */
-	irq_set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW);
-
-	return 0;
-}
-arch_initcall(xxs1500_init_irq);

arch/mips/alchemy/xxs1500/init.c

@@ -1,63 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	XXS1500 board setup
- *
- * Copyright 2003, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <asm/bootinfo.h>
-#include <asm/mach-au1x00/au1000.h>
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
-	return "XXS1500";
-}
-
-void __init prom_init(void)
-{
-	unsigned char *memsize_str;
-	unsigned long memsize;
-
-	prom_argc = fw_arg0;
-	prom_argv = (char **)fw_arg1;
-	prom_envp = (char **)fw_arg2;
-
-	prom_init_cmdline();
-
-	memsize_str = prom_getenv("memsize");
-	if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize))
-		memsize = 0x04000000;
-
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
-
-void prom_putchar(unsigned char c)
-{
-	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
-}

arch/mips/alchemy/xxs1500/platform.c

@@ -1,63 +0,0 @@
-/*
- * XXS1500 board platform device registration
- *
- * Copyright (C) 2009 Manuel Lauss
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-static struct resource xxs1500_pcmcia_res[] = {
-	{
-		.name	= "pcmcia-io",
-		.flags	= IORESOURCE_MEM,
-		.start	= AU1000_PCMCIA_IO_PHYS_ADDR,
-		.end	= AU1000_PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1,
-	},
-	{
-		.name	= "pcmcia-attr",
-		.flags	= IORESOURCE_MEM,
-		.start	= AU1000_PCMCIA_ATTR_PHYS_ADDR,
-		.end	= AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
-	},
-	{
-		.name	= "pcmcia-mem",
-		.flags	= IORESOURCE_MEM,
-		.start	= AU1000_PCMCIA_MEM_PHYS_ADDR,
-		.end	= AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
-	},
-};
-
-static struct platform_device xxs1500_pcmcia_dev = {
-	.name		= "xxs1500_pcmcia",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(xxs1500_pcmcia_res),
-	.resource	= xxs1500_pcmcia_res,
-};
-
-static struct platform_device *xxs1500_devs[] __initdata = {
-	&xxs1500_pcmcia_dev,
-};
-
-static int __init xxs1500_dev_init(void)
-{
-	return platform_add_devices(xxs1500_devs,
-				    ARRAY_SIZE(xxs1500_devs));
-}
-device_initcall(xxs1500_dev_init);

arch/mips/ar7/gpio.c

@@ -217,7 +217,7 @@ struct titan_gpio_cfg {
 	u32 func;
 };
 
-static struct titan_gpio_cfg titan_gpio_table[] = {
+static const struct titan_gpio_cfg titan_gpio_table[] = {
 	/* reg, start bit, mux value */
 	{4, 24, 1},
 	{4, 26, 1},

arch/mips/ar7/platform.c

@@ -462,6 +462,40 @@ static struct gpio_led fb_fon_leds[] = {
 	},
 };
 
+static struct gpio_led gt701_leds[] = {
+	{
+		.name			= "inet:green",
+		.gpio			= 13,
+		.active_low		= 1,
+	},
+	{
+		.name			= "usb",
+		.gpio			= 12,
+		.active_low		= 1,
+	},
+	{
+		.name			= "inet:red",
+		.gpio			= 9,
+		.active_low		= 1,
+	},
+	{
+		.name			= "power:red",
+		.gpio			= 7,
+		.active_low		= 1,
+	},
+	{
+		.name			= "power:green",
+		.gpio			= 8,
+		.active_low		= 1,
+		.default_trigger	= "default-on",
+	},
+        {
+                .name                   = "ethernet",
+                .gpio                   = 10,
+                .active_low             = 1,
+        },
+};
+
 static struct gpio_led_platform_data ar7_led_data;
 
 static struct platform_device ar7_gpio_leds = {
@@ -503,6 +537,9 @@ static void __init detect_leds(void)
 	} else if (strstr(prid, "CYWM") || strstr(prid, "CYWL")) {
 		ar7_led_data.num_leds = ARRAY_SIZE(titan_leds);
 		ar7_led_data.leds = titan_leds;
+	} else if (strstr(prid, "GT701")) {
+		ar7_led_data.num_leds = ARRAY_SIZE(gt701_leds);
+		ar7_led_data.leds = gt701_leds;
 	}
 }
 
@@ -536,7 +573,7 @@ static int __init ar7_register_uarts(void)
 
 	bus_clk = clk_get(NULL, "bus");
 	if (IS_ERR(bus_clk))
-		panic("unable to get bus clk\n");
+		panic("unable to get bus clk");
 
 	uart_port.type		= PORT_AR7;
 	uart_port.uartclk	= clk_get_rate(bus_clk) / 2;

arch/mips/ar7/prom.c

@@ -69,7 +69,7 @@ struct psbl_rec {
 	u32	ffs_size;
 };
 
-static __initdata char psp_env_version[] = "TIENV0.8";
+static const char psp_env_version[] __initconst = "TIENV0.8";
 
 struct psp_env_chunk {
 	u8	num;
@@ -84,7 +84,7 @@ struct psp_var_map_entry {
 	char	*value;
 };
 
-static struct psp_var_map_entry psp_var_map[] = {
+static const struct psp_var_map_entry psp_var_map[] = {
 	{  1,	"cpufrequency" },
 	{  2,	"memsize" },
 	{  3,	"flashsize" },

arch/mips/ar7/setup.c

@@ -96,7 +96,7 @@ void __init plat_mem_setup(void)
 
 	io_base = (unsigned long)ioremap(AR7_REGS_BASE, 0x10000);
 	if (!io_base)
-		panic("Can't remap IO base!\n");
+		panic("Can't remap IO base!");
 	set_io_port_base(io_base);
 
 	prom_meminit();

arch/mips/ath79/Kconfig

@@ -2,13 +2,26 @@ if ATH79
 
 menu "Atheros AR71XX/AR724X/AR913X machine selection"
 
+config ATH79_MACH_AP121
+	bool "Atheros AP121 reference board"
+	select SOC_AR933X
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_SPI
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Atheros AP121 reference board.
+
 config ATH79_MACH_AP81
 	bool "Atheros AP81 reference board"
 	select SOC_AR913X
-	select ATH79_DEV_AR913X_WMAC
 	select ATH79_DEV_GPIO_BUTTONS
 	select ATH79_DEV_LEDS_GPIO
 	select ATH79_DEV_SPI
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Atheros AP81 reference board.
@@ -19,10 +32,21 @@ config ATH79_MACH_PB44
 	select ATH79_DEV_GPIO_BUTTONS
 	select ATH79_DEV_LEDS_GPIO
 	select ATH79_DEV_SPI
+	select ATH79_DEV_USB
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Atheros PB44 reference board.
 
+config ATH79_MACH_UBNT_XM
+	bool "Ubiquiti Networks XM (rev 1.0) board"
+	select SOC_AR724X
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_SPI
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Ubiquiti Networks XM (rev 1.0) board.
+
 endmenu
 
 config SOC_AR71XX
@@ -33,14 +57,15 @@ config SOC_AR71XX
 config SOC_AR724X
 	select USB_ARCH_HAS_EHCI
 	select USB_ARCH_HAS_OHCI
+	select HW_HAS_PCI
 	def_bool n
 
 config SOC_AR913X
 	select USB_ARCH_HAS_EHCI
 	def_bool n
 
-config ATH79_DEV_AR913X_WMAC
-	depends on SOC_AR913X
+config SOC_AR933X
+	select USB_ARCH_HAS_EHCI
 	def_bool n
 
 config ATH79_DEV_GPIO_BUTTONS
@@ -52,4 +77,11 @@ config ATH79_DEV_LEDS_GPIO
 config ATH79_DEV_SPI
 	def_bool n
 
+config ATH79_DEV_USB
+	def_bool n
+
+config ATH79_DEV_WMAC
+	depends on (SOC_AR913X || SOC_AR933X)
+	def_bool n
+
 endif

arch/mips/ath79/Makefile

@@ -16,13 +16,16 @@ obj-$(CONFIG_EARLY_PRINTK)		+= early_printk.o
 # Devices
 #
 obj-y					+= dev-common.o
-obj-$(CONFIG_ATH79_DEV_AR913X_WMAC)	+= dev-ar913x-wmac.o
 obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS)	+= dev-gpio-buttons.o
 obj-$(CONFIG_ATH79_DEV_LEDS_GPIO)	+= dev-leds-gpio.o
 obj-$(CONFIG_ATH79_DEV_SPI)		+= dev-spi.o
+obj-$(CONFIG_ATH79_DEV_USB)		+= dev-usb.o
+obj-$(CONFIG_ATH79_DEV_WMAC)		+= dev-wmac.o
 
 #
 # Machines
 #
+obj-$(CONFIG_ATH79_MACH_AP121)		+= mach-ap121.o
 obj-$(CONFIG_ATH79_MACH_AP81)		+= mach-ap81.o
 obj-$(CONFIG_ATH79_MACH_PB44)		+= mach-pb44.o
+obj-$(CONFIG_ATH79_MACH_UBNT_XM)	+= mach-ubnt-xm.o

arch/mips/ath79/clock.c

@@ -110,6 +110,59 @@ static void __init ar913x_clocks_init(void)
 	ath79_uart_clk.rate = ath79_ahb_clk.rate;
 }
 
+static void __init ar933x_clocks_init(void)
+{
+	u32 clock_ctrl;
+	u32 cpu_config;
+	u32 freq;
+	u32 t;
+
+	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
+	if (t & AR933X_BOOTSTRAP_REF_CLK_40)
+		ath79_ref_clk.rate = (40 * 1000 * 1000);
+	else
+		ath79_ref_clk.rate = (25 * 1000 * 1000);
+
+	clock_ctrl = ath79_pll_rr(AR933X_PLL_CLOCK_CTRL_REG);
+	if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) {
+		ath79_cpu_clk.rate = ath79_ref_clk.rate;
+		ath79_ahb_clk.rate = ath79_ref_clk.rate;
+		ath79_ddr_clk.rate = ath79_ref_clk.rate;
+	} else {
+		cpu_config = ath79_pll_rr(AR933X_PLL_CPU_CONFIG_REG);
+
+		t = (cpu_config >> AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
+		    AR933X_PLL_CPU_CONFIG_REFDIV_MASK;
+		freq = ath79_ref_clk.rate / t;
+
+		t = (cpu_config >> AR933X_PLL_CPU_CONFIG_NINT_SHIFT) &
+		    AR933X_PLL_CPU_CONFIG_NINT_MASK;
+		freq *= t;
+
+		t = (cpu_config >> AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
+		    AR933X_PLL_CPU_CONFIG_OUTDIV_MASK;
+		if (t == 0)
+			t = 1;
+
+		freq >>= t;
+
+		t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT) &
+		     AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK) + 1;
+		ath79_cpu_clk.rate = freq / t;
+
+		t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT) &
+		      AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK) + 1;
+		ath79_ddr_clk.rate = freq / t;
+
+		t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT) &
+		     AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1;
+		ath79_ahb_clk.rate = freq / t;
+	}
+
+	ath79_wdt_clk.rate = ath79_ref_clk.rate;
+	ath79_uart_clk.rate = ath79_ref_clk.rate;
+}
+
 void __init ath79_clocks_init(void)
 {
 	if (soc_is_ar71xx())
@@ -118,6 +171,8 @@ void __init ath79_clocks_init(void)
 		ar724x_clocks_init();
 	else if (soc_is_ar913x())
 		ar913x_clocks_init();
+	else if (soc_is_ar933x())
+		ar933x_clocks_init();
 	else
 		BUG();
 

arch/mips/ath79/common.c

@@ -30,6 +30,7 @@ u32 ath79_ddr_freq;
 EXPORT_SYMBOL_GPL(ath79_ddr_freq);
 
 enum ath79_soc_type ath79_soc;
+unsigned int ath79_soc_rev;
 
 void __iomem *ath79_pll_base;
 void __iomem *ath79_reset_base;
@@ -64,6 +65,8 @@ void ath79_device_reset_set(u32 mask)
 		reg = AR724X_RESET_REG_RESET_MODULE;
 	else if (soc_is_ar913x())
 		reg = AR913X_RESET_REG_RESET_MODULE;
+	else if (soc_is_ar933x())
+		reg = AR933X_RESET_REG_RESET_MODULE;
 	else
 		BUG();
 
@@ -86,6 +89,8 @@ void ath79_device_reset_clear(u32 mask)
 		reg = AR724X_RESET_REG_RESET_MODULE;
 	else if (soc_is_ar913x())
 		reg = AR913X_RESET_REG_RESET_MODULE;
+	else if (soc_is_ar933x())
+		reg = AR933X_RESET_REG_RESET_MODULE;
 	else
 		BUG();
 

arch/mips/ath79/dev-ar913x-wmac.c

@@ -1,60 +0,0 @@
-/*
- *  Atheros AR913X SoC built-in WMAC device support
- *
- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include "dev-ar913x-wmac.h"
-
-static struct ath9k_platform_data ar913x_wmac_data;
-
-static struct resource ar913x_wmac_resources[] = {
-	{
-		.start	= AR913X_WMAC_BASE,
-		.end	= AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= ATH79_CPU_IRQ_IP2,
-		.end	= ATH79_CPU_IRQ_IP2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ar913x_wmac_device = {
-	.name		= "ath9k",
-	.id		= -1,
-	.resource	= ar913x_wmac_resources,
-	.num_resources	= ARRAY_SIZE(ar913x_wmac_resources),
-	.dev = {
-		.platform_data = &ar913x_wmac_data,
-	},
-};
-
-void __init ath79_register_ar913x_wmac(u8 *cal_data)
-{
-	if (cal_data)
-		memcpy(ar913x_wmac_data.eeprom_data, cal_data,
-		       sizeof(ar913x_wmac_data.eeprom_data));
-
-	/* reset the WMAC */
-	ath79_device_reset_set(AR913X_RESET_AMBA2WMAC);
-	mdelay(10);
-
-	ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC);
-	mdelay(10);
-
-	platform_device_register(&ar913x_wmac_device);
-}

arch/mips/ath79/dev-common.c

@@ -20,6 +20,7 @@
 
 #include <asm/mach-ath79/ath79.h>
 #include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ar933x_uart_platform.h>
 #include "common.h"
 #include "dev-common.h"
 
@@ -54,6 +55,30 @@ static struct platform_device ath79_uart_device = {
 	},
 };
 
+static struct resource ar933x_uart_resources[] = {
+	{
+		.start	= AR933X_UART_BASE,
+		.end	= AR933X_UART_BASE + AR71XX_UART_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= ATH79_MISC_IRQ_UART,
+		.end	= ATH79_MISC_IRQ_UART,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct ar933x_uart_platform_data ar933x_uart_data;
+static struct platform_device ar933x_uart_device = {
+	.name		= "ar933x-uart",
+	.id		= -1,
+	.resource	= ar933x_uart_resources,
+	.num_resources	= ARRAY_SIZE(ar933x_uart_resources),
+	.dev = {
+		.platform_data	= &ar933x_uart_data,
+	},
+};
+
 void __init ath79_register_uart(void)
 {
 	struct clk *clk;
@@ -62,8 +87,17 @@ void __init ath79_register_uart(void)
 	if (IS_ERR(clk))
 		panic("unable to get UART clock, err=%ld", PTR_ERR(clk));
 
-	ath79_uart_data[0].uartclk = clk_get_rate(clk);
-	platform_device_register(&ath79_uart_device);
+	if (soc_is_ar71xx() ||
+	    soc_is_ar724x() ||
+	    soc_is_ar913x()) {
+		ath79_uart_data[0].uartclk = clk_get_rate(clk);
+		platform_device_register(&ath79_uart_device);
+	} else if (soc_is_ar933x()) {
+		ar933x_uart_data.uartclk = clk_get_rate(clk);
+		platform_device_register(&ar933x_uart_device);
+	} else {
+		BUG();
+	}
 }
 
 static struct platform_device ath79_wdt_device = {

arch/mips/ath79/dev-usb.c

@@ -0,0 +1,197 @@
+/*
+ *  Atheros AR7XXX/AR9XXX USB Host Controller device
+ *
+ *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Parts of this file are based on Atheros' 2.6.15 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include "common.h"
+#include "dev-usb.h"
+
+static struct resource ath79_ohci_resources[] = {
+	[0] = {
+		/* .start and .end fields are filled dynamically */
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= ATH79_MISC_IRQ_OHCI,
+		.end	= ATH79_MISC_IRQ_OHCI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 ath79_ohci_dmamask = DMA_BIT_MASK(32);
+static struct platform_device ath79_ohci_device = {
+	.name		= "ath79-ohci",
+	.id		= -1,
+	.resource	= ath79_ohci_resources,
+	.num_resources	= ARRAY_SIZE(ath79_ohci_resources),
+	.dev = {
+		.dma_mask		= &ath79_ohci_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource ath79_ehci_resources[] = {
+	[0] = {
+		/* .start and .end fields are filled dynamically */
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= ATH79_CPU_IRQ_USB,
+		.end	= ATH79_CPU_IRQ_USB,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 ath79_ehci_dmamask = DMA_BIT_MASK(32);
+static struct platform_device ath79_ehci_device = {
+	.name		= "ath79-ehci",
+	.id		= -1,
+	.resource	= ath79_ehci_resources,
+	.num_resources	= ARRAY_SIZE(ath79_ehci_resources),
+	.dev = {
+		.dma_mask		= &ath79_ehci_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+#define AR71XX_USB_RESET_MASK	(AR71XX_RESET_USB_HOST | \
+				 AR71XX_RESET_USB_PHY | \
+				 AR71XX_RESET_USB_OHCI_DLL)
+
+static void __init ath79_usb_setup(void)
+{
+	void __iomem *usb_ctrl_base;
+
+	ath79_device_reset_set(AR71XX_USB_RESET_MASK);
+	mdelay(1000);
+	ath79_device_reset_clear(AR71XX_USB_RESET_MASK);
+
+	usb_ctrl_base = ioremap(AR71XX_USB_CTRL_BASE, AR71XX_USB_CTRL_SIZE);
+
+	/* Turning on the Buff and Desc swap bits */
+	__raw_writel(0xf0000, usb_ctrl_base + AR71XX_USB_CTRL_REG_CONFIG);
+
+	/* WAR for HW bug. Here it adjusts the duration between two SOFS */
+	__raw_writel(0x20c00, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ);
+
+	iounmap(usb_ctrl_base);
+
+	mdelay(900);
+
+	ath79_ohci_resources[0].start = AR71XX_OHCI_BASE;
+	ath79_ohci_resources[0].end = AR71XX_OHCI_BASE + AR71XX_OHCI_SIZE - 1;
+	platform_device_register(&ath79_ohci_device);
+
+	ath79_ehci_resources[0].start = AR71XX_EHCI_BASE;
+	ath79_ehci_resources[0].end = AR71XX_EHCI_BASE + AR71XX_EHCI_SIZE - 1;
+	ath79_ehci_device.name = "ar71xx-ehci";
+	platform_device_register(&ath79_ehci_device);
+}
+
+static void __init ar7240_usb_setup(void)
+{
+	void __iomem *usb_ctrl_base;
+
+	ath79_device_reset_clear(AR7240_RESET_OHCI_DLL);
+	ath79_device_reset_set(AR7240_RESET_USB_HOST);
+
+	mdelay(1000);
+
+	ath79_device_reset_set(AR7240_RESET_OHCI_DLL);
+	ath79_device_reset_clear(AR7240_RESET_USB_HOST);
+
+	usb_ctrl_base = ioremap(AR7240_USB_CTRL_BASE, AR7240_USB_CTRL_SIZE);
+
+	/* WAR for HW bug. Here it adjusts the duration between two SOFS */
+	__raw_writel(0x3, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ);
+
+	iounmap(usb_ctrl_base);
+
+	ath79_ohci_resources[0].start = AR7240_OHCI_BASE;
+	ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1;
+	platform_device_register(&ath79_ohci_device);
+}
+
+static void __init ar724x_usb_setup(void)
+{
+	ath79_device_reset_set(AR724X_RESET_USBSUS_OVERRIDE);
+	mdelay(10);
+
+	ath79_device_reset_clear(AR724X_RESET_USB_HOST);
+	mdelay(10);
+
+	ath79_device_reset_clear(AR724X_RESET_USB_PHY);
+	mdelay(10);
+
+	ath79_ehci_resources[0].start = AR724X_EHCI_BASE;
+	ath79_ehci_resources[0].end = AR724X_EHCI_BASE + AR724X_EHCI_SIZE - 1;
+	ath79_ehci_device.name = "ar724x-ehci";
+	platform_device_register(&ath79_ehci_device);
+}
+
+static void __init ar913x_usb_setup(void)
+{
+	ath79_device_reset_set(AR913X_RESET_USBSUS_OVERRIDE);
+	mdelay(10);
+
+	ath79_device_reset_clear(AR913X_RESET_USB_HOST);
+	mdelay(10);
+
+	ath79_device_reset_clear(AR913X_RESET_USB_PHY);
+	mdelay(10);
+
+	ath79_ehci_resources[0].start = AR913X_EHCI_BASE;
+	ath79_ehci_resources[0].end = AR913X_EHCI_BASE + AR913X_EHCI_SIZE - 1;
+	ath79_ehci_device.name = "ar913x-ehci";
+	platform_device_register(&ath79_ehci_device);
+}
+
+static void __init ar933x_usb_setup(void)
+{
+	ath79_device_reset_set(AR933X_RESET_USBSUS_OVERRIDE);
+	mdelay(10);
+
+	ath79_device_reset_clear(AR933X_RESET_USB_HOST);
+	mdelay(10);
+
+	ath79_device_reset_clear(AR933X_RESET_USB_PHY);
+	mdelay(10);
+
+	ath79_ehci_resources[0].start = AR933X_EHCI_BASE;
+	ath79_ehci_resources[0].end = AR933X_EHCI_BASE + AR933X_EHCI_SIZE - 1;
+	ath79_ehci_device.name = "ar933x-ehci";
+	platform_device_register(&ath79_ehci_device);
+}
+
+void __init ath79_register_usb(void)
+{
+	if (soc_is_ar71xx())
+		ath79_usb_setup();
+	else if (soc_is_ar7240())
+		ar7240_usb_setup();
+	else if (soc_is_ar7241() || soc_is_ar7242())
+		ar724x_usb_setup();
+	else if (soc_is_ar913x())
+		ar913x_usb_setup();
+	else if (soc_is_ar933x())
+		ar933x_usb_setup();
+	else
+		BUG();
+}

arch/mips/ath79/dev-ar913x-wmac.h → arch/mips/ath79/dev-usb.h

@@ -1,5 +1,5 @@
 /*
- *  Atheros AR913X SoC built-in WMAC device support
+ *  Atheros AR71XX/AR724X/AR913X USB Host Controller support
  *
  *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
@@ -9,9 +9,9 @@
  *  by the Free Software Foundation.
  */
 
-#ifndef _ATH79_DEV_AR913X_WMAC_H
-#define _ATH79_DEV_AR913X_WMAC_H
+#ifndef _ATH79_DEV_USB_H
+#define _ATH79_DEV_USB_H
 
-void ath79_register_ar913x_wmac(u8 *cal_data);
+void ath79_register_usb(void);
 
-#endif /* _ATH79_DEV_AR913X_WMAC_H */
+#endif /* _ATH79_DEV_USB_H */

arch/mips/ath79/dev-wmac.c

@@ -0,0 +1,109 @@
+/*
+ *  Atheros AR913X/AR933X SoC built-in WMAC device support
+ *
+ *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include "dev-wmac.h"
+
+static struct ath9k_platform_data ath79_wmac_data;
+
+static struct resource ath79_wmac_resources[] = {
+	{
+		/* .start and .end fields are filled dynamically */
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= ATH79_CPU_IRQ_IP2,
+		.end	= ATH79_CPU_IRQ_IP2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ath79_wmac_device = {
+	.name		= "ath9k",
+	.id		= -1,
+	.resource	= ath79_wmac_resources,
+	.num_resources	= ARRAY_SIZE(ath79_wmac_resources),
+	.dev = {
+		.platform_data = &ath79_wmac_data,
+	},
+};
+
+static void __init ar913x_wmac_setup(void)
+{
+	/* reset the WMAC */
+	ath79_device_reset_set(AR913X_RESET_AMBA2WMAC);
+	mdelay(10);
+
+	ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC);
+	mdelay(10);
+
+	ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
+	ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
+}
+
+
+static int ar933x_wmac_reset(void)
+{
+	ath79_device_reset_clear(AR933X_RESET_WMAC);
+	ath79_device_reset_set(AR933X_RESET_WMAC);
+
+	return 0;
+}
+
+static int ar933x_r1_get_wmac_revision(void)
+{
+	return ath79_soc_rev;
+}
+
+static void __init ar933x_wmac_setup(void)
+{
+	u32 t;
+
+	ar933x_wmac_reset();
+
+	ath79_wmac_device.name = "ar933x_wmac";
+
+	ath79_wmac_resources[0].start = AR933X_WMAC_BASE;
+	ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1;
+
+	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
+	if (t & AR933X_BOOTSTRAP_REF_CLK_40)
+		ath79_wmac_data.is_clk_25mhz = false;
+	else
+		ath79_wmac_data.is_clk_25mhz = true;
+
+	if (ath79_soc_rev == 1)
+		ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision;
+
+	ath79_wmac_data.external_reset = ar933x_wmac_reset;
+}
+
+void __init ath79_register_wmac(u8 *cal_data)
+{
+	if (soc_is_ar913x())
+		ar913x_wmac_setup();
+	if (soc_is_ar933x())
+		ar933x_wmac_setup();
+	else
+		BUG();
+
+	if (cal_data)
+		memcpy(ath79_wmac_data.eeprom_data, cal_data,
+		       sizeof(ath79_wmac_data.eeprom_data));
+
+	platform_device_register(&ath79_wmac_device);
+}

arch/mips/ath79/dev-wmac.h

@@ -0,0 +1,17 @@
+/*
+ *  Atheros AR913X/AR933X SoC built-in WMAC device support
+ *
+ *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _ATH79_DEV_WMAC_H
+#define _ATH79_DEV_WMAC_H
+
+void ath79_register_wmac(u8 *cal_data);
+
+#endif /* _ATH79_DEV_WMAC_H */

arch/mips/ath79/early_printk.c

@@ -1,7 +1,7 @@
 /*
- *  Atheros AR71XX/AR724X/AR913X SoC early printk support
+ *  Atheros AR7XXX/AR9XXX SoC early printk support
  *
- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
  *
  *  This program is free software; you can redistribute it and/or modify it
@@ -10,27 +10,85 @@
  */
 
 #include <linux/io.h>
+#include <linux/errno.h>
 #include <linux/serial_reg.h>
 #include <asm/addrspace.h>
 
+#include <asm/mach-ath79/ath79.h>
 #include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ar933x_uart.h>
 
-static inline void prom_wait_thre(void __iomem *base)
+static void (*_prom_putchar) (unsigned char);
+
+static inline void prom_putchar_wait(void __iomem *reg, u32 mask, u32 val)
 {
-	u32 lsr;
+	u32 t;
 
 	do {
-		lsr = __raw_readl(base + UART_LSR * 4);
-		if (lsr & UART_LSR_THRE)
+		t = __raw_readl(reg);
+		if ((t & mask) == val)
 			break;
 	} while (1);
 }
 
-void prom_putchar(unsigned char ch)
+static void prom_putchar_ar71xx(unsigned char ch)
 {
 	void __iomem *base = (void __iomem *)(KSEG1ADDR(AR71XX_UART_BASE));
 
-	prom_wait_thre(base);
+	prom_putchar_wait(base + UART_LSR * 4, UART_LSR_THRE, UART_LSR_THRE);
 	__raw_writel(ch, base + UART_TX * 4);
-	prom_wait_thre(base);
+	prom_putchar_wait(base + UART_LSR * 4, UART_LSR_THRE, UART_LSR_THRE);
+}
+
+static void prom_putchar_ar933x(unsigned char ch)
+{
+	void __iomem *base = (void __iomem *)(KSEG1ADDR(AR933X_UART_BASE));
+
+	prom_putchar_wait(base + AR933X_UART_DATA_REG, AR933X_UART_DATA_TX_CSR,
+			  AR933X_UART_DATA_TX_CSR);
+	__raw_writel(AR933X_UART_DATA_TX_CSR | ch, base + AR933X_UART_DATA_REG);
+	prom_putchar_wait(base + AR933X_UART_DATA_REG, AR933X_UART_DATA_TX_CSR,
+			  AR933X_UART_DATA_TX_CSR);
+}
+
+static void prom_putchar_dummy(unsigned char ch)
+{
+	/* nothing to do */
+}
+
+static void prom_putchar_init(void)
+{
+	void __iomem *base;
+	u32 id;
+
+	base = (void __iomem *)(KSEG1ADDR(AR71XX_RESET_BASE));
+	id = __raw_readl(base + AR71XX_RESET_REG_REV_ID);
+	id &= REV_ID_MAJOR_MASK;
+
+	switch (id) {
+	case REV_ID_MAJOR_AR71XX:
+	case REV_ID_MAJOR_AR7240:
+	case REV_ID_MAJOR_AR7241:
+	case REV_ID_MAJOR_AR7242:
+	case REV_ID_MAJOR_AR913X:
+		_prom_putchar = prom_putchar_ar71xx;
+		break;
+
+	case REV_ID_MAJOR_AR9330:
+	case REV_ID_MAJOR_AR9331:
+		_prom_putchar = prom_putchar_ar933x;
+		break;
+
+	default:
+		_prom_putchar = prom_putchar_dummy;
+		break;
+	}
+}
+
+void prom_putchar(unsigned char ch)
+{
+	if (!_prom_putchar)
+		prom_putchar_init();
+
+	_prom_putchar(ch);
 }

arch/mips/ath79/gpio.c

@@ -153,6 +153,8 @@ void __init ath79_gpio_init(void)
 		ath79_gpio_count = AR724X_GPIO_COUNT;
 	else if (soc_is_ar913x())
 		ath79_gpio_count = AR913X_GPIO_COUNT;
+	else if (soc_is_ar933x())
+		ath79_gpio_count = AR933X_GPIO_COUNT;
 	else
 		BUG();
 

arch/mips/ath79/irq.c

@@ -46,6 +46,15 @@ static void ath79_misc_irq_handler(unsigned int irq, struct irq_desc *desc)
 	else if (pending & MISC_INT_TIMER)
 		generic_handle_irq(ATH79_MISC_IRQ_TIMER);
 
+	else if (pending & MISC_INT_TIMER2)
+		generic_handle_irq(ATH79_MISC_IRQ_TIMER2);
+
+	else if (pending & MISC_INT_TIMER3)
+		generic_handle_irq(ATH79_MISC_IRQ_TIMER3);
+
+	else if (pending & MISC_INT_TIMER4)
+		generic_handle_irq(ATH79_MISC_IRQ_TIMER4);
+
 	else if (pending & MISC_INT_OHCI)
 		generic_handle_irq(ATH79_MISC_IRQ_OHCI);
 
@@ -58,6 +67,9 @@ static void ath79_misc_irq_handler(unsigned int irq, struct irq_desc *desc)
 	else if (pending & MISC_INT_WDOG)
 		generic_handle_irq(ATH79_MISC_IRQ_WDOG);
 
+	else if (pending & MISC_INT_ETHSW)
+		generic_handle_irq(ATH79_MISC_IRQ_ETHSW);
+
 	else
 		spurious_interrupt();
 }
@@ -117,7 +129,7 @@ static void __init ath79_misc_irq_init(void)
 
 	if (soc_is_ar71xx() || soc_is_ar913x())
 		ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
-	else if (soc_is_ar724x())
+	else if (soc_is_ar724x() || soc_is_ar933x())
 		ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
 	else
 		BUG();
@@ -174,6 +186,9 @@ void __init arch_init_irq(void)
 	} else if (soc_is_ar913x()) {
 		ath79_ip2_flush_reg = AR913X_DDR_REG_FLUSH_WMAC;
 		ath79_ip3_flush_reg = AR913X_DDR_REG_FLUSH_USB;
+	} else if (soc_is_ar933x()) {
+		ath79_ip2_flush_reg = AR933X_DDR_REG_FLUSH_WMAC;
+		ath79_ip3_flush_reg = AR933X_DDR_REG_FLUSH_USB;
 	} else
 		BUG();
 

arch/mips/ath79/mach-ap121.c

@@ -0,0 +1,92 @@
+/*
+ *  Atheros AP121 board support
+ *
+ *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include "machtypes.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+
+#define AP121_GPIO_LED_WLAN		0
+#define AP121_GPIO_LED_USB		1
+
+#define AP121_GPIO_BTN_JUMPSTART	11
+#define AP121_GPIO_BTN_RESET		12
+
+#define AP121_KEYS_POLL_INTERVAL	20	/* msecs */
+#define AP121_KEYS_DEBOUNCE_INTERVAL	(3 * AP121_KEYS_POLL_INTERVAL)
+
+#define AP121_CAL_DATA_ADDR	0x1fff1000
+
+static struct gpio_led ap121_leds_gpio[] __initdata = {
+	{
+		.name		= "ap121:green:usb",
+		.gpio		= AP121_GPIO_LED_USB,
+		.active_low	= 0,
+	},
+	{
+		.name		= "ap121:green:wlan",
+		.gpio		= AP121_GPIO_LED_WLAN,
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_keys_button ap121_gpio_keys[] __initdata = {
+	{
+		.desc		= "jumpstart button",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= AP121_GPIO_BTN_JUMPSTART,
+		.active_low	= 1,
+	},
+	{
+		.desc		= "reset button",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= AP121_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}
+};
+
+static struct spi_board_info ap121_spi_info[] = {
+	{
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.max_speed_hz	= 25000000,
+		.modalias	= "mx25l1606e",
+	}
+};
+
+static struct ath79_spi_platform_data ap121_spi_data = {
+	.bus_num	= 0,
+	.num_chipselect	= 1,
+};
+
+static void __init ap121_setup(void)
+{
+	u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
+				 ap121_leds_gpio);
+	ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(ap121_gpio_keys),
+					ap121_gpio_keys);
+
+	ath79_register_spi(&ap121_spi_data, ap121_spi_info,
+			   ARRAY_SIZE(ap121_spi_info));
+	ath79_register_usb();
+	ath79_register_wmac(cal_data);
+}
+
+MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
+	     ap121_setup);

arch/mips/ath79/mach-ap81.c

@@ -10,10 +10,11 @@
  */
 
 #include "machtypes.h"
-#include "dev-ar913x-wmac.h"
+#include "dev-wmac.h"
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 #include "dev-spi.h"
+#include "dev-usb.h"
 
 #define AP81_GPIO_LED_STATUS	1
 #define AP81_GPIO_LED_AOSS	3
@@ -91,7 +92,8 @@ static void __init ap81_setup(void)
 					ap81_gpio_keys);
 	ath79_register_spi(&ap81_spi_data, ap81_spi_info,
 			   ARRAY_SIZE(ap81_spi_info));
-	ath79_register_ar913x_wmac(cal_data);
+	ath79_register_wmac(cal_data);
+	ath79_register_usb();
 }
 
 MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",

arch/mips/ath79/mach-pb44.c

@@ -18,6 +18,7 @@
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 #include "dev-spi.h"
+#include "dev-usb.h"
 
 #define PB44_GPIO_I2C_SCL	0
 #define PB44_GPIO_I2C_SDA	1
@@ -112,6 +113,7 @@ static void __init pb44_init(void)
 					pb44_gpio_keys);
 	ath79_register_spi(&pb44_spi_data, pb44_spi_info,
 			   ARRAY_SIZE(pb44_spi_info));
+	ath79_register_usb();
 }
 
 MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",

arch/mips/ath79/mach-ubnt-xm.c

@@ -0,0 +1,119 @@
+/*
+ *  Ubiquiti Networks XM (rev 1.0) board support
+ *
+ *  Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+ *
+ *  Derived from: mach-pb44.c
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#ifdef CONFIG_PCI
+#include <linux/ath9k_platform.h>
+#include <asm/mach-ath79/pci-ath724x.h>
+#endif /* CONFIG_PCI */
+
+#include "machtypes.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+
+#define UBNT_XM_GPIO_LED_L1		0
+#define UBNT_XM_GPIO_LED_L2		1
+#define UBNT_XM_GPIO_LED_L3		11
+#define UBNT_XM_GPIO_LED_L4		7
+
+#define UBNT_XM_GPIO_BTN_RESET		12
+
+#define UBNT_XM_KEYS_POLL_INTERVAL	20
+#define UBNT_XM_KEYS_DEBOUNCE_INTERVAL	(3 * UBNT_XM_KEYS_POLL_INTERVAL)
+
+#define UBNT_XM_PCI_IRQ			48
+#define UBNT_XM_EEPROM_ADDR		(u8 *) KSEG1ADDR(0x1fff1000)
+
+static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
+	{
+		.name		= "ubnt-xm:red:link1",
+		.gpio		= UBNT_XM_GPIO_LED_L1,
+		.active_low	= 0,
+	}, {
+		.name		= "ubnt-xm:orange:link2",
+		.gpio		= UBNT_XM_GPIO_LED_L2,
+		.active_low	= 0,
+	}, {
+		.name		= "ubnt-xm:green:link3",
+		.gpio		= UBNT_XM_GPIO_LED_L3,
+		.active_low	= 0,
+	}, {
+		.name		= "ubnt-xm:green:link4",
+		.gpio		= UBNT_XM_GPIO_LED_L4,
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_keys_button ubnt_xm_gpio_keys[] __initdata = {
+	{
+		.desc			= "reset",
+		.type			= EV_KEY,
+		.code			= KEY_RESTART,
+		.debounce_interval	= UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
+		.gpio			= UBNT_XM_GPIO_BTN_RESET,
+		.active_low		= 1,
+	}
+};
+
+static struct spi_board_info ubnt_xm_spi_info[] = {
+	{
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.max_speed_hz	= 25000000,
+		.modalias	= "mx25l6405d",
+	}
+};
+
+static struct ath79_spi_platform_data ubnt_xm_spi_data = {
+	.bus_num		= 0,
+	.num_chipselect		= 1,
+};
+
+#ifdef CONFIG_PCI
+static struct ath9k_platform_data ubnt_xm_eeprom_data;
+
+static struct ath724x_pci_data ubnt_xm_pci_data[] = {
+	{
+		.irq	= UBNT_XM_PCI_IRQ,
+		.pdata	= &ubnt_xm_eeprom_data,
+	},
+};
+#endif /* CONFIG_PCI */
+
+static void __init ubnt_xm_init(void)
+{
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
+				 ubnt_xm_leds_gpio);
+
+	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(ubnt_xm_gpio_keys),
+					ubnt_xm_gpio_keys);
+
+	ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
+			   ARRAY_SIZE(ubnt_xm_spi_info));
+
+#ifdef CONFIG_PCI
+	memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
+	       sizeof(ubnt_xm_eeprom_data.eeprom_data));
+
+	ath724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
+#endif /* CONFIG_PCI */
+
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_XM,
+	     "UBNT-XM",
+	     "Ubiquiti Networks XM (rev 1.0) board",
+	     ubnt_xm_init);

arch/mips/ath79/machtypes.h

@@ -16,8 +16,10 @@
 
 enum ath79_mach_type {
 	ATH79_MACH_GENERIC = 0,
+	ATH79_MACH_AP121,		/* Atheros AP121 reference board */
 	ATH79_MACH_AP81,		/* Atheros AP81 reference board */
 	ATH79_MACH_PB44,		/* Atheros PB44 reference board */
+	ATH79_MACH_UBNT_XM,		/* Ubiquiti Networks XM board rev 1.0 */
 };
 
 #endif /* _ATH79_MACHTYPE_H */

arch/mips/ath79/setup.c

@@ -101,19 +101,31 @@ static void __init ath79_detect_sys_type(void)
 	case REV_ID_MAJOR_AR7240:
 		ath79_soc = ATH79_SOC_AR7240;
 		chip = "7240";
-		rev = (id & AR724X_REV_ID_REVISION_MASK);
+		rev = id & AR724X_REV_ID_REVISION_MASK;
 		break;
 
 	case REV_ID_MAJOR_AR7241:
 		ath79_soc = ATH79_SOC_AR7241;
 		chip = "7241";
-		rev = (id & AR724X_REV_ID_REVISION_MASK);
+		rev = id & AR724X_REV_ID_REVISION_MASK;
 		break;
 
 	case REV_ID_MAJOR_AR7242:
 		ath79_soc = ATH79_SOC_AR7242;
 		chip = "7242";
-		rev = (id & AR724X_REV_ID_REVISION_MASK);
+		rev = id & AR724X_REV_ID_REVISION_MASK;
+		break;
+
+	case REV_ID_MAJOR_AR9330:
+		ath79_soc = ATH79_SOC_AR9330;
+		chip = "9330";
+		rev = id & AR933X_REV_ID_REVISION_MASK;
+		break;
+
+	case REV_ID_MAJOR_AR9331:
+		ath79_soc = ATH79_SOC_AR9331;
+		chip = "9331";
+		rev = id & AR933X_REV_ID_REVISION_MASK;
 		break;
 
 	case REV_ID_MAJOR_AR913X:
@@ -134,9 +146,11 @@ static void __init ath79_detect_sys_type(void)
 		break;
 
 	default:
-		panic("ath79: unknown SoC, id:0x%08x\n", id);
+		panic("ath79: unknown SoC, id:0x%08x", id);
 	}
 
+	ath79_soc_rev = rev;
+
 	sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev);
 	pr_info("SoC: %s\n", ath79_sys_type);
 }

arch/mips/bcm47xx/setup.c

@@ -289,7 +289,7 @@ static void __init bcm47xx_register_ssb(void)
 	err = ssb_bus_ssbbus_register(&(bcm47xx_bus.ssb), SSB_ENUM_BASE,
 				      bcm47xx_get_invariants);
 	if (err)
-		panic("Failed to initialize SSB bus (err %d)\n", err);
+		panic("Failed to initialize SSB bus (err %d)", err);
 
 	mcore = &bcm47xx_bus.ssb.mipscore;
 	if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
@@ -314,7 +314,7 @@ static void __init bcm47xx_register_bcma(void)
 
 	err = bcma_host_soc_register(&bcm47xx_bus.bcma);
 	if (err)
-		panic("Failed to initialize BCMA bus (err %d)\n", err);
+		panic("Failed to initialize BCMA bus (err %d)", err);
 }
 #endif
 

arch/mips/bcm63xx/Kconfig

@@ -20,6 +20,10 @@ config BCM63XX_CPU_6348
 config BCM63XX_CPU_6358
 	bool "support 6358 CPU"
 	select HW_HAS_PCI
+
+config BCM63XX_CPU_6368
+	bool "support 6368 CPU"
+	select HW_HAS_PCI
 endmenu
 
 source "arch/mips/bcm63xx/boards/Kconfig"

arch/mips/bcm63xx/boards/board_bcm963xx.c

@@ -709,15 +709,9 @@ void __init board_prom_init(void)
 	char cfe_version[32];
 	u32 val;
 
-	/* read base address of boot chip select (0)
-	 * 6345 does not have MPI but boots from standard
-	 * MIPS Flash address */
-	if (BCMCPU_IS_6345())
-		val = 0x1fc00000;
-	else {
-		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-		val &= MPI_CSBASE_BASE_MASK;
-	}
+	/* read base address of boot chip select (0) */
+	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+	val &= MPI_CSBASE_BASE_MASK;
 	boot_addr = (u8 *)KSEG1ADDR(val);
 
 	/* dump cfe version */
@@ -797,18 +791,6 @@ void __init board_prom_init(void)
 	}
 
 	bcm_gpio_writel(val, GPIO_MODE_REG);
-
-	/* Generate MAC address for WLAN and
-	 * register our SPROM */
-#ifdef CONFIG_SSB_PCIHOST
-	if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
-		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-		if (ssb_arch_register_fallback_sprom(
-				&bcm63xx_get_fallback_sprom) < 0)
-			printk(KERN_ERR PFX "failed to register fallback SPROM\n");
-	}
-#endif
 }
 
 /*
@@ -895,13 +877,23 @@ int __init board_register_devices(void)
 	if (board.has_dsp)
 		bcm63xx_dsp_register(&board.dsp);
 
-	/* read base address of boot chip select (0) */
-	if (BCMCPU_IS_6345())
-		val = 0x1fc00000;
-	else {
-		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-		val &= MPI_CSBASE_BASE_MASK;
+	/* Generate MAC address for WLAN and register our SPROM,
+	 * do this after registering enet devices
+	 */
+#ifdef CONFIG_SSB_PCIHOST
+	if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
+		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+		if (ssb_arch_register_fallback_sprom(
+				&bcm63xx_get_fallback_sprom) < 0)
+			pr_err(PFX "failed to register fallback SPROM\n");
 	}
+#endif
+
+	/* read base address of boot chip select (0) */
+	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+	val &= MPI_CSBASE_BASE_MASK;
+
 	mtd_resources[0].start = val;
 	mtd_resources[0].end = 0x1FFFFFFF;
 

arch/mips/bcm63xx/clk.c

@@ -10,6 +10,7 @@
 #include <linux/mutex.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
 #include <bcm63xx_cpu.h>
 #include <bcm63xx_io.h>
 #include <bcm63xx_regs.h>
@@ -112,6 +113,34 @@ static struct clk clk_ephy = {
 	.set	= ephy_set,
 };
 
+/*
+ * Ethernet switch clock
+ */
+static void enetsw_set(struct clk *clk, int enable)
+{
+	if (!BCMCPU_IS_6368())
+		return;
+	bcm_hwclock_set(CKCTL_6368_ROBOSW_CLK_EN |
+			CKCTL_6368_SWPKT_USB_EN |
+			CKCTL_6368_SWPKT_SAR_EN, enable);
+	if (enable) {
+		u32 val;
+
+		/* reset switch core afer clock change */
+		val = bcm_perf_readl(PERF_SOFTRESET_6368_REG);
+		val &= ~SOFTRESET_6368_ENETSW_MASK;
+		bcm_perf_writel(val, PERF_SOFTRESET_6368_REG);
+		msleep(10);
+		val |= SOFTRESET_6368_ENETSW_MASK;
+		bcm_perf_writel(val, PERF_SOFTRESET_6368_REG);
+		msleep(10);
+	}
+}
+
+static struct clk clk_enetsw = {
+	.set	= enetsw_set,
+};
+
 /*
  * PCM clock
  */
@@ -131,9 +160,10 @@ static struct clk clk_pcm = {
  */
 static void usbh_set(struct clk *clk, int enable)
 {
-	if (!BCMCPU_IS_6348())
-		return;
-	bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
+	if (BCMCPU_IS_6348())
+		bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
+	else if (BCMCPU_IS_6368())
+		bcm_hwclock_set(CKCTL_6368_USBH_CLK_EN, enable);
 }
 
 static struct clk clk_usbh = {
@@ -161,6 +191,36 @@ static struct clk clk_spi = {
 	.set	= spi_set,
 };
 
+/*
+ * XTM clock
+ */
+static void xtm_set(struct clk *clk, int enable)
+{
+	if (!BCMCPU_IS_6368())
+		return;
+
+	bcm_hwclock_set(CKCTL_6368_SAR_CLK_EN |
+			CKCTL_6368_SWPKT_SAR_EN, enable);
+
+	if (enable) {
+		u32 val;
+
+		/* reset sar core afer clock change */
+		val = bcm_perf_readl(PERF_SOFTRESET_6368_REG);
+		val &= ~SOFTRESET_6368_SAR_MASK;
+		bcm_perf_writel(val, PERF_SOFTRESET_6368_REG);
+		mdelay(1);
+		val |= SOFTRESET_6368_SAR_MASK;
+		bcm_perf_writel(val, PERF_SOFTRESET_6368_REG);
+		mdelay(1);
+	}
+}
+
+
+static struct clk clk_xtm = {
+	.set	= xtm_set,
+};
+
 /*
  * Internal peripheral clock
  */
@@ -204,12 +264,16 @@ struct clk *clk_get(struct device *dev, const char *id)
 		return &clk_enet0;
 	if (!strcmp(id, "enet1"))
 		return &clk_enet1;
+	if (!strcmp(id, "enetsw"))
+		return &clk_enetsw;
 	if (!strcmp(id, "ephy"))
 		return &clk_ephy;
 	if (!strcmp(id, "usbh"))
 		return &clk_usbh;
 	if (!strcmp(id, "spi"))
 		return &clk_spi;
+	if (!strcmp(id, "xtm"))
+		return &clk_xtm;
 	if (!strcmp(id, "periph"))
 		return &clk_periph;
 	if (BCMCPU_IS_6358() && !strcmp(id, "pcm"))

arch/mips/bcm63xx/cpu.c

@@ -29,166 +29,47 @@ static u16 bcm63xx_cpu_rev;
 static unsigned int bcm63xx_cpu_freq;
 static unsigned int bcm63xx_memory_size;
 
-/*
- * 6338 register sets and irqs
- */
-static const unsigned long bcm96338_regs_base[] = {
-	[RSET_DSL_LMEM]		= BCM_6338_DSL_LMEM_BASE,
-	[RSET_PERF]		= BCM_6338_PERF_BASE,
-	[RSET_TIMER]		= BCM_6338_TIMER_BASE,
-	[RSET_WDT]		= BCM_6338_WDT_BASE,
-	[RSET_UART0]		= BCM_6338_UART0_BASE,
-	[RSET_UART1]		= BCM_6338_UART1_BASE,
-	[RSET_GPIO]		= BCM_6338_GPIO_BASE,
-	[RSET_SPI]		= BCM_6338_SPI_BASE,
-	[RSET_OHCI0]		= BCM_6338_OHCI0_BASE,
-	[RSET_OHCI_PRIV]	= BCM_6338_OHCI_PRIV_BASE,
-	[RSET_USBH_PRIV]	= BCM_6338_USBH_PRIV_BASE,
-	[RSET_UDC0]		= BCM_6338_UDC0_BASE,
-	[RSET_MPI]		= BCM_6338_MPI_BASE,
-	[RSET_PCMCIA]		= BCM_6338_PCMCIA_BASE,
-	[RSET_SDRAM]		= BCM_6338_SDRAM_BASE,
-	[RSET_DSL]		= BCM_6338_DSL_BASE,
-	[RSET_ENET0]		= BCM_6338_ENET0_BASE,
-	[RSET_ENET1]		= BCM_6338_ENET1_BASE,
-	[RSET_ENETDMA]		= BCM_6338_ENETDMA_BASE,
-	[RSET_MEMC]		= BCM_6338_MEMC_BASE,
-	[RSET_DDR]		= BCM_6338_DDR_BASE,
+static const unsigned long bcm6338_regs_base[] = {
+	__GEN_CPU_REGS_TABLE(6338)
 };
 
-static const int bcm96338_irqs[] = {
-	[IRQ_TIMER]		= BCM_6338_TIMER_IRQ,
-	[IRQ_UART0]		= BCM_6338_UART0_IRQ,
-	[IRQ_DSL]		= BCM_6338_DSL_IRQ,
-	[IRQ_ENET0]		= BCM_6338_ENET0_IRQ,
-	[IRQ_ENET_PHY]		= BCM_6338_ENET_PHY_IRQ,
-	[IRQ_ENET0_RXDMA]	= BCM_6338_ENET0_RXDMA_IRQ,
-	[IRQ_ENET0_TXDMA]	= BCM_6338_ENET0_TXDMA_IRQ,
+static const int bcm6338_irqs[] = {
+	__GEN_CPU_IRQ_TABLE(6338)
 };
 
-/*
- * 6345 register sets and irqs
- */
-static const unsigned long bcm96345_regs_base[] = {
-	[RSET_DSL_LMEM]		= BCM_6345_DSL_LMEM_BASE,
-	[RSET_PERF]		= BCM_6345_PERF_BASE,
-	[RSET_TIMER]		= BCM_6345_TIMER_BASE,
-	[RSET_WDT]		= BCM_6345_WDT_BASE,
-	[RSET_UART0]		= BCM_6345_UART0_BASE,
-	[RSET_UART1]		= BCM_6345_UART1_BASE,
-	[RSET_GPIO]		= BCM_6345_GPIO_BASE,
-	[RSET_SPI]		= BCM_6345_SPI_BASE,
-	[RSET_UDC0]		= BCM_6345_UDC0_BASE,
-	[RSET_OHCI0]		= BCM_6345_OHCI0_BASE,
-	[RSET_OHCI_PRIV]	= BCM_6345_OHCI_PRIV_BASE,
-	[RSET_USBH_PRIV]	= BCM_6345_USBH_PRIV_BASE,
-	[RSET_MPI]		= BCM_6345_MPI_BASE,
-	[RSET_PCMCIA]		= BCM_6345_PCMCIA_BASE,
-	[RSET_DSL]		= BCM_6345_DSL_BASE,
-	[RSET_ENET0]		= BCM_6345_ENET0_BASE,
-	[RSET_ENET1]		= BCM_6345_ENET1_BASE,
-	[RSET_ENETDMA]		= BCM_6345_ENETDMA_BASE,
-	[RSET_EHCI0]		= BCM_6345_EHCI0_BASE,
-	[RSET_SDRAM]		= BCM_6345_SDRAM_BASE,
-	[RSET_MEMC]		= BCM_6345_MEMC_BASE,
-	[RSET_DDR]		= BCM_6345_DDR_BASE,
+static const unsigned long bcm6345_regs_base[] = {
+	__GEN_CPU_REGS_TABLE(6345)
 };
 
-static const int bcm96345_irqs[] = {
-	[IRQ_TIMER]		= BCM_6345_TIMER_IRQ,
-	[IRQ_UART0]		= BCM_6345_UART0_IRQ,
-	[IRQ_DSL]		= BCM_6345_DSL_IRQ,
-	[IRQ_ENET0]		= BCM_6345_ENET0_IRQ,
-	[IRQ_ENET_PHY]		= BCM_6345_ENET_PHY_IRQ,
-	[IRQ_ENET0_RXDMA]	= BCM_6345_ENET0_RXDMA_IRQ,
-	[IRQ_ENET0_TXDMA]	= BCM_6345_ENET0_TXDMA_IRQ,
+static const int bcm6345_irqs[] = {
+	__GEN_CPU_IRQ_TABLE(6345)
 };
 
-/*
- * 6348 register sets and irqs
- */
-static const unsigned long bcm96348_regs_base[] = {
-	[RSET_DSL_LMEM]		= BCM_6348_DSL_LMEM_BASE,
-	[RSET_PERF]		= BCM_6348_PERF_BASE,
-	[RSET_TIMER]		= BCM_6348_TIMER_BASE,
-	[RSET_WDT]		= BCM_6348_WDT_BASE,
-	[RSET_UART0]		= BCM_6348_UART0_BASE,
-	[RSET_UART1]		= BCM_6348_UART1_BASE,
-	[RSET_GPIO]		= BCM_6348_GPIO_BASE,
-	[RSET_SPI]		= BCM_6348_SPI_BASE,
-	[RSET_OHCI0]		= BCM_6348_OHCI0_BASE,
-	[RSET_OHCI_PRIV]	= BCM_6348_OHCI_PRIV_BASE,
-	[RSET_USBH_PRIV]	= BCM_6348_USBH_PRIV_BASE,
-	[RSET_MPI]		= BCM_6348_MPI_BASE,
-	[RSET_PCMCIA]		= BCM_6348_PCMCIA_BASE,
-	[RSET_SDRAM]		= BCM_6348_SDRAM_BASE,
-	[RSET_DSL]		= BCM_6348_DSL_BASE,
-	[RSET_ENET0]		= BCM_6348_ENET0_BASE,
-	[RSET_ENET1]		= BCM_6348_ENET1_BASE,
-	[RSET_ENETDMA]		= BCM_6348_ENETDMA_BASE,
-	[RSET_MEMC]		= BCM_6348_MEMC_BASE,
-	[RSET_DDR]		= BCM_6348_DDR_BASE,
+static const unsigned long bcm6348_regs_base[] = {
+	__GEN_CPU_REGS_TABLE(6348)
 };
 
-static const int bcm96348_irqs[] = {
-	[IRQ_TIMER]		= BCM_6348_TIMER_IRQ,
-	[IRQ_UART0]		= BCM_6348_UART0_IRQ,
-	[IRQ_DSL]		= BCM_6348_DSL_IRQ,
-	[IRQ_ENET0]		= BCM_6348_ENET0_IRQ,
-	[IRQ_ENET1]		= BCM_6348_ENET1_IRQ,
-	[IRQ_ENET_PHY]		= BCM_6348_ENET_PHY_IRQ,
-	[IRQ_OHCI0]		= BCM_6348_OHCI0_IRQ,
-	[IRQ_PCMCIA]		= BCM_6348_PCMCIA_IRQ,
-	[IRQ_ENET0_RXDMA]	= BCM_6348_ENET0_RXDMA_IRQ,
-	[IRQ_ENET0_TXDMA]	= BCM_6348_ENET0_TXDMA_IRQ,
-	[IRQ_ENET1_RXDMA]	= BCM_6348_ENET1_RXDMA_IRQ,
-	[IRQ_ENET1_TXDMA]	= BCM_6348_ENET1_TXDMA_IRQ,
-	[IRQ_PCI]		= BCM_6348_PCI_IRQ,
+static const int bcm6348_irqs[] = {
+	__GEN_CPU_IRQ_TABLE(6348)
+
 };
 
-/*
- * 6358 register sets and irqs
- */
-static const unsigned long bcm96358_regs_base[] = {
-	[RSET_DSL_LMEM]		= BCM_6358_DSL_LMEM_BASE,
-	[RSET_PERF]		= BCM_6358_PERF_BASE,
-	[RSET_TIMER]		= BCM_6358_TIMER_BASE,
-	[RSET_WDT]		= BCM_6358_WDT_BASE,
-	[RSET_UART0]		= BCM_6358_UART0_BASE,
-	[RSET_UART1]		= BCM_6358_UART1_BASE,
-	[RSET_GPIO]		= BCM_6358_GPIO_BASE,
-	[RSET_SPI]		= BCM_6358_SPI_BASE,
-	[RSET_OHCI0]		= BCM_6358_OHCI0_BASE,
-	[RSET_EHCI0]		= BCM_6358_EHCI0_BASE,
-	[RSET_OHCI_PRIV]	= BCM_6358_OHCI_PRIV_BASE,
-	[RSET_USBH_PRIV]	= BCM_6358_USBH_PRIV_BASE,
-	[RSET_MPI]		= BCM_6358_MPI_BASE,
-	[RSET_PCMCIA]		= BCM_6358_PCMCIA_BASE,
-	[RSET_SDRAM]		= BCM_6358_SDRAM_BASE,
-	[RSET_DSL]		= BCM_6358_DSL_BASE,
-	[RSET_ENET0]		= BCM_6358_ENET0_BASE,
-	[RSET_ENET1]		= BCM_6358_ENET1_BASE,
-	[RSET_ENETDMA]		= BCM_6358_ENETDMA_BASE,
-	[RSET_MEMC]		= BCM_6358_MEMC_BASE,
-	[RSET_DDR]		= BCM_6358_DDR_BASE,
+static const unsigned long bcm6358_regs_base[] = {
+	__GEN_CPU_REGS_TABLE(6358)
+};
+
+static const int bcm6358_irqs[] = {
+	__GEN_CPU_IRQ_TABLE(6358)
+
 };
 
-static const int bcm96358_irqs[] = {
-	[IRQ_TIMER]		= BCM_6358_TIMER_IRQ,
-	[IRQ_UART0]		= BCM_6358_UART0_IRQ,
-	[IRQ_UART1]		= BCM_6358_UART1_IRQ,
-	[IRQ_DSL]		= BCM_6358_DSL_IRQ,
-	[IRQ_ENET0]		= BCM_6358_ENET0_IRQ,
-	[IRQ_ENET1]		= BCM_6358_ENET1_IRQ,
-	[IRQ_ENET_PHY]		= BCM_6358_ENET_PHY_IRQ,
-	[IRQ_OHCI0]		= BCM_6358_OHCI0_IRQ,
-	[IRQ_EHCI0]		= BCM_6358_EHCI0_IRQ,
-	[IRQ_PCMCIA]		= BCM_6358_PCMCIA_IRQ,
-	[IRQ_ENET0_RXDMA]	= BCM_6358_ENET0_RXDMA_IRQ,
-	[IRQ_ENET0_TXDMA]	= BCM_6358_ENET0_TXDMA_IRQ,
-	[IRQ_ENET1_RXDMA]	= BCM_6358_ENET1_RXDMA_IRQ,
-	[IRQ_ENET1_TXDMA]	= BCM_6358_ENET1_TXDMA_IRQ,
-	[IRQ_PCI]		= BCM_6358_PCI_IRQ,
+static const unsigned long bcm6368_regs_base[] = {
+	__GEN_CPU_REGS_TABLE(6368)
+};
+
+static const int bcm6368_irqs[] = {
+	__GEN_CPU_IRQ_TABLE(6368)
+
 };
 
 u16 __bcm63xx_get_cpu_id(void)
@@ -217,20 +98,19 @@ unsigned int bcm63xx_get_memory_size(void)
 
 static unsigned int detect_cpu_clock(void)
 {
-	unsigned int tmp, n1 = 0, n2 = 0, m1 = 0;
-
-	/* BCM6338 has a fixed 240 Mhz frequency */
-	if (BCMCPU_IS_6338())
+	switch (bcm63xx_get_cpu_id()) {
+	case BCM6338_CPU_ID:
+		/* BCM6338 has a fixed 240 Mhz frequency */
 		return 240000000;
 
-	/* BCM6345 has a fixed 140Mhz frequency */
-	if (BCMCPU_IS_6345())
+	case BCM6345_CPU_ID:
+		/* BCM6345 has a fixed 140Mhz frequency */
 		return 140000000;
 
-	/*
-	 * frequency depends on PLL configuration:
-	 */
-	if (BCMCPU_IS_6348()) {
+	case BCM6348_CPU_ID:
+	{
+		unsigned int tmp, n1, n2, m1;
+
 		/* 16MHz * (N1 + 1) * (N2 + 2) / (M1_CPU + 1) */
 		tmp = bcm_perf_readl(PERF_MIPSPLLCTL_REG);
 		n1 = (tmp & MIPSPLLCTL_N1_MASK) >> MIPSPLLCTL_N1_SHIFT;
@@ -239,17 +119,47 @@ static unsigned int detect_cpu_clock(void)
 		n1 += 1;
 		n2 += 2;
 		m1 += 1;
+		return (16 * 1000000 * n1 * n2) / m1;
 	}
 
-	if (BCMCPU_IS_6358()) {
+	case BCM6358_CPU_ID:
+	{
+		unsigned int tmp, n1, n2, m1;
+
 		/* 16MHz * N1 * N2 / M1_CPU */
 		tmp = bcm_ddr_readl(DDR_DMIPSPLLCFG_REG);
 		n1 = (tmp & DMIPSPLLCFG_N1_MASK) >> DMIPSPLLCFG_N1_SHIFT;
 		n2 = (tmp & DMIPSPLLCFG_N2_MASK) >> DMIPSPLLCFG_N2_SHIFT;
 		m1 = (tmp & DMIPSPLLCFG_M1_MASK) >> DMIPSPLLCFG_M1_SHIFT;
+		return (16 * 1000000 * n1 * n2) / m1;
 	}
 
-	return (16 * 1000000 * n1 * n2) / m1;
+	case BCM6368_CPU_ID:
+	{
+		unsigned int tmp, p1, p2, ndiv, m1;
+
+		/* (64MHz / P1) * P2 * NDIV / M1_CPU */
+		tmp = bcm_ddr_readl(DDR_DMIPSPLLCFG_6368_REG);
+
+		p1 = (tmp & DMIPSPLLCFG_6368_P1_MASK) >>
+			DMIPSPLLCFG_6368_P1_SHIFT;
+
+		p2 = (tmp & DMIPSPLLCFG_6368_P2_MASK) >>
+			DMIPSPLLCFG_6368_P2_SHIFT;
+
+		ndiv = (tmp & DMIPSPLLCFG_6368_NDIV_MASK) >>
+			DMIPSPLLCFG_6368_NDIV_SHIFT;
+
+		tmp = bcm_ddr_readl(DDR_DMIPSPLLDIV_6368_REG);
+		m1 = (tmp & DMIPSPLLDIV_6368_MDIV_MASK) >>
+			DMIPSPLLDIV_6368_MDIV_SHIFT;
+
+		return (((64 * 1000000) / p1) * p2 * ndiv) / m1;
+	}
+
+	default:
+		BUG();
+	}
 }
 
 /*
@@ -260,8 +170,10 @@ static unsigned int detect_memory_size(void)
 	unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
 	u32 val;
 
-	if (BCMCPU_IS_6345())
-		return (8 * 1024 * 1024);
+	if (BCMCPU_IS_6345()) {
+		val = bcm_sdram_readl(SDRAM_MBASE_REG);
+		return (val * 8 * 1024 * 1024);
+	}
 
 	if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
 		val = bcm_sdram_readl(SDRAM_CFG_REG);
@@ -271,7 +183,7 @@ static unsigned int detect_memory_size(void)
 		banks = (val & SDRAM_CFG_BANK_MASK) ? 2 : 1;
 	}
 
-	if (BCMCPU_IS_6358()) {
+	if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) {
 		val = bcm_memc_readl(MEMC_CFG_REG);
 		rows = (val & MEMC_CFG_ROW_MASK) >> MEMC_CFG_ROW_SHIFT;
 		cols = (val & MEMC_CFG_COL_MASK) >> MEMC_CFG_COL_SHIFT;
@@ -301,24 +213,33 @@ void __init bcm63xx_cpu_init(void)
 	case CPU_BMIPS3300:
 		if ((read_c0_prid() & 0xff00) == PRID_IMP_BMIPS3300_ALT) {
 			expected_cpu_id = BCM6348_CPU_ID;
-			bcm63xx_regs_base = bcm96348_regs_base;
-			bcm63xx_irqs = bcm96348_irqs;
+			bcm63xx_regs_base = bcm6348_regs_base;
+			bcm63xx_irqs = bcm6348_irqs;
 		} else {
 			__cpu_name[cpu] = "Broadcom BCM6338";
 			expected_cpu_id = BCM6338_CPU_ID;
-			bcm63xx_regs_base = bcm96338_regs_base;
-			bcm63xx_irqs = bcm96338_irqs;
+			bcm63xx_regs_base = bcm6338_regs_base;
+			bcm63xx_irqs = bcm6338_irqs;
 		}
 		break;
 	case CPU_BMIPS32:
 		expected_cpu_id = BCM6345_CPU_ID;
-		bcm63xx_regs_base = bcm96345_regs_base;
-		bcm63xx_irqs = bcm96345_irqs;
+		bcm63xx_regs_base = bcm6345_regs_base;
+		bcm63xx_irqs = bcm6345_irqs;
 		break;
 	case CPU_BMIPS4350:
-		expected_cpu_id = BCM6358_CPU_ID;
-		bcm63xx_regs_base = bcm96358_regs_base;
-		bcm63xx_irqs = bcm96358_irqs;
+		switch (read_c0_prid() & 0xf0) {
+		case 0x10:
+			expected_cpu_id = BCM6358_CPU_ID;
+			bcm63xx_regs_base = bcm6358_regs_base;
+			bcm63xx_irqs = bcm6358_irqs;
+			break;
+		case 0x30:
+			expected_cpu_id = BCM6368_CPU_ID;
+			bcm63xx_regs_base = bcm6368_regs_base;
+			bcm63xx_irqs = bcm6368_irqs;
+			break;
+		}
 		break;
 	}
 

arch/mips/bcm63xx/dev-uart.c

@@ -54,7 +54,7 @@ int __init bcm63xx_uart_register(unsigned int id)
 	if (id >= ARRAY_SIZE(bcm63xx_uart_devices))
 		return -ENODEV;
 
-	if (id == 1 && !BCMCPU_IS_6358())
+	if (id == 1 && (!BCMCPU_IS_6358() && !BCMCPU_IS_6368()))
 		return -ENODEV;
 
 	if (id == 0) {

arch/mips/bcm63xx/gpio.c

@@ -4,7 +4,7 @@
  * for more details.
  *
  * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
- * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2008-2011 Florian Fainelli <florian@openwrt.org>
  */
 
 #include <linux/kernel.h>
@@ -18,6 +18,34 @@
 #include <bcm63xx_io.h>
 #include <bcm63xx_regs.h>
 
+#ifndef BCMCPU_RUNTIME_DETECT
+#define gpio_out_low_reg	GPIO_DATA_LO_REG
+#ifdef CONFIG_BCM63XX_CPU_6345
+#ifdef gpio_out_low_reg
+#undef gpio_out_low_reg
+#define gpio_out_low_reg	GPIO_DATA_LO_REG_6345
+#endif /* gpio_out_low_reg */
+#endif /* CONFIG_BCM63XX_CPU_6345 */
+
+static inline void bcm63xx_gpio_out_low_reg_init(void)
+{
+}
+#else /* ! BCMCPU_RUNTIME_DETECT */
+static u32 gpio_out_low_reg;
+
+static void bcm63xx_gpio_out_low_reg_init(void)
+{
+	switch (bcm63xx_get_cpu_id()) {
+	case BCM6345_CPU_ID:
+		gpio_out_low_reg = GPIO_DATA_LO_REG_6345;
+		break;
+	default:
+		gpio_out_low_reg = GPIO_DATA_LO_REG;
+		break;
+	}
+}
+#endif /* ! BCMCPU_RUNTIME_DETECT */
+
 static DEFINE_SPINLOCK(bcm63xx_gpio_lock);
 static u32 gpio_out_low, gpio_out_high;
 
@@ -33,7 +61,7 @@ static void bcm63xx_gpio_set(struct gpio_chip *chip,
 		BUG();
 
 	if (gpio < 32) {
-		reg = GPIO_DATA_LO_REG;
+		reg = gpio_out_low_reg;
 		mask = 1 << gpio;
 		v = &gpio_out_low;
 	} else {
@@ -60,7 +88,7 @@ static int bcm63xx_gpio_get(struct gpio_chip *chip, unsigned gpio)
 		BUG();
 
 	if (gpio < 32) {
-		reg = GPIO_DATA_LO_REG;
+		reg = gpio_out_low_reg;
 		mask = 1 << gpio;
 	} else {
 		reg = GPIO_DATA_HI_REG;
@@ -125,8 +153,11 @@ static struct gpio_chip bcm63xx_gpio_chip = {
 
 int __init bcm63xx_gpio_init(void)
 {
-	gpio_out_low = bcm_gpio_readl(GPIO_DATA_LO_REG);
-	gpio_out_high = bcm_gpio_readl(GPIO_DATA_HI_REG);
+	bcm63xx_gpio_out_low_reg_init();
+
+	gpio_out_low = bcm_gpio_readl(gpio_out_low_reg);
+	if (!BCMCPU_IS_6345())
+		gpio_out_high = bcm_gpio_readl(GPIO_DATA_HI_REG);
 	bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count();
 	pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio);
 

arch/mips/bcm63xx/irq.c

@@ -19,19 +19,187 @@
 #include <bcm63xx_io.h>
 #include <bcm63xx_irq.h>
 
+static void __dispatch_internal(void) __maybe_unused;
+static void __dispatch_internal_64(void) __maybe_unused;
+static void __internal_irq_mask_32(unsigned int irq) __maybe_unused;
+static void __internal_irq_mask_64(unsigned int irq) __maybe_unused;
+static void __internal_irq_unmask_32(unsigned int irq) __maybe_unused;
+static void __internal_irq_unmask_64(unsigned int irq) __maybe_unused;
+
+#ifndef BCMCPU_RUNTIME_DETECT
+#ifdef CONFIG_BCM63XX_CPU_6338
+#define irq_stat_reg		PERF_IRQSTAT_6338_REG
+#define irq_mask_reg		PERF_IRQMASK_6338_REG
+#define irq_bits		32
+#define is_ext_irq_cascaded	0
+#define ext_irq_start		0
+#define ext_irq_end		0
+#define ext_irq_count		4
+#define ext_irq_cfg_reg1	PERF_EXTIRQ_CFG_REG_6338
+#define ext_irq_cfg_reg2	0
+#endif
+#ifdef CONFIG_BCM63XX_CPU_6345
+#define irq_stat_reg		PERF_IRQSTAT_6345_REG
+#define irq_mask_reg		PERF_IRQMASK_6345_REG
+#define irq_bits		32
+#define is_ext_irq_cascaded	0
+#define ext_irq_start		0
+#define ext_irq_end		0
+#define ext_irq_count		0
+#define ext_irq_cfg_reg1	0
+#define ext_irq_cfg_reg2	0
+#endif
+#ifdef CONFIG_BCM63XX_CPU_6348
+#define irq_stat_reg		PERF_IRQSTAT_6348_REG
+#define irq_mask_reg		PERF_IRQMASK_6348_REG
+#define irq_bits		32
+#define is_ext_irq_cascaded	0
+#define ext_irq_start		0
+#define ext_irq_end		0
+#define ext_irq_count		4
+#define ext_irq_cfg_reg1	PERF_EXTIRQ_CFG_REG_6348
+#define ext_irq_cfg_reg2	0
+#endif
+#ifdef CONFIG_BCM63XX_CPU_6358
+#define irq_stat_reg		PERF_IRQSTAT_6358_REG
+#define irq_mask_reg		PERF_IRQMASK_6358_REG
+#define irq_bits		32
+#define is_ext_irq_cascaded	1
+#define ext_irq_start		(BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE)
+#define ext_irq_end		(BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE)
+#define ext_irq_count		4
+#define ext_irq_cfg_reg1	PERF_EXTIRQ_CFG_REG_6358
+#define ext_irq_cfg_reg2	0
+#endif
+#ifdef CONFIG_BCM63XX_CPU_6368
+#define irq_stat_reg		PERF_IRQSTAT_6368_REG
+#define irq_mask_reg		PERF_IRQMASK_6368_REG
+#define irq_bits		64
+#define is_ext_irq_cascaded	1
+#define ext_irq_start		(BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE)
+#define ext_irq_end		(BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE)
+#define ext_irq_count		6
+#define ext_irq_cfg_reg1	PERF_EXTIRQ_CFG_REG_6368
+#define ext_irq_cfg_reg2	PERF_EXTIRQ_CFG_REG2_6368
+#endif
+
+#if irq_bits == 32
+#define dispatch_internal			__dispatch_internal
+#define internal_irq_mask			__internal_irq_mask_32
+#define internal_irq_unmask			__internal_irq_unmask_32
+#else
+#define dispatch_internal			__dispatch_internal_64
+#define internal_irq_mask			__internal_irq_mask_64
+#define internal_irq_unmask			__internal_irq_unmask_64
+#endif
+
+#define irq_stat_addr	(bcm63xx_regset_address(RSET_PERF) + irq_stat_reg)
+#define irq_mask_addr	(bcm63xx_regset_address(RSET_PERF) + irq_mask_reg)
+
+static inline void bcm63xx_init_irq(void)
+{
+}
+#else /* ! BCMCPU_RUNTIME_DETECT */
+
+static u32 irq_stat_addr, irq_mask_addr;
+static void (*dispatch_internal)(void);
+static int is_ext_irq_cascaded;
+static unsigned int ext_irq_count;
+static unsigned int ext_irq_start, ext_irq_end;
+static unsigned int ext_irq_cfg_reg1, ext_irq_cfg_reg2;
+static void (*internal_irq_mask)(unsigned int irq);
+static void (*internal_irq_unmask)(unsigned int irq);
+
+static void bcm63xx_init_irq(void)
+{
+	int irq_bits;
+
+	irq_stat_addr = bcm63xx_regset_address(RSET_PERF);
+	irq_mask_addr = bcm63xx_regset_address(RSET_PERF);
+
+	switch (bcm63xx_get_cpu_id()) {
+	case BCM6338_CPU_ID:
+		irq_stat_addr += PERF_IRQSTAT_6338_REG;
+		irq_mask_addr += PERF_IRQMASK_6338_REG;
+		irq_bits = 32;
+		break;
+	case BCM6345_CPU_ID:
+		irq_stat_addr += PERF_IRQSTAT_6345_REG;
+		irq_mask_addr += PERF_IRQMASK_6345_REG;
+		irq_bits = 32;
+		break;
+	case BCM6348_CPU_ID:
+		irq_stat_addr += PERF_IRQSTAT_6348_REG;
+		irq_mask_addr += PERF_IRQMASK_6348_REG;
+		irq_bits = 32;
+		ext_irq_count = 4;
+		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
+		break;
+	case BCM6358_CPU_ID:
+		irq_stat_addr += PERF_IRQSTAT_6358_REG;
+		irq_mask_addr += PERF_IRQMASK_6358_REG;
+		irq_bits = 32;
+		ext_irq_count = 4;
+		is_ext_irq_cascaded = 1;
+		ext_irq_start = BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE;
+		ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE;
+		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
+		break;
+	case BCM6368_CPU_ID:
+		irq_stat_addr += PERF_IRQSTAT_6368_REG;
+		irq_mask_addr += PERF_IRQMASK_6368_REG;
+		irq_bits = 64;
+		ext_irq_count = 6;
+		is_ext_irq_cascaded = 1;
+		ext_irq_start = BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE;
+		ext_irq_end = BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE;
+		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6368;
+		ext_irq_cfg_reg2 = PERF_EXTIRQ_CFG_REG2_6368;
+		break;
+	default:
+		BUG();
+	}
+
+	if (irq_bits == 32) {
+		dispatch_internal = __dispatch_internal;
+		internal_irq_mask = __internal_irq_mask_32;
+		internal_irq_unmask = __internal_irq_unmask_32;
+	} else {
+		dispatch_internal = __dispatch_internal_64;
+		internal_irq_mask = __internal_irq_mask_64;
+		internal_irq_unmask = __internal_irq_unmask_64;
+	}
+}
+#endif /* ! BCMCPU_RUNTIME_DETECT */
+
+static inline u32 get_ext_irq_perf_reg(int irq)
+{
+	if (irq < 4)
+		return ext_irq_cfg_reg1;
+	return ext_irq_cfg_reg2;
+}
+
+static inline void handle_internal(int intbit)
+{
+	if (is_ext_irq_cascaded &&
+	    intbit >= ext_irq_start && intbit <= ext_irq_end)
+		do_IRQ(intbit - ext_irq_start + IRQ_EXTERNAL_BASE);
+	else
+		do_IRQ(intbit + IRQ_INTERNAL_BASE);
+}
+
 /*
  * dispatch internal devices IRQ (uart, enet, watchdog, ...). do not
  * prioritize any interrupt relatively to another. the static counter
  * will resume the loop where it ended the last time we left this
  * function.
  */
-static void bcm63xx_irq_dispatch_internal(void)
+static void __dispatch_internal(void)
 {
 	u32 pending;
 	static int i;
 
-	pending = bcm_perf_readl(PERF_IRQMASK_REG) &
-		bcm_perf_readl(PERF_IRQSTAT_REG);
+	pending = bcm_readl(irq_stat_addr) & bcm_readl(irq_mask_addr);
 
 	if (!pending)
 		return ;
@@ -41,7 +209,28 @@ static void bcm63xx_irq_dispatch_internal(void)
 
 		i = (i + 1) & 0x1f;
 		if (pending & (1 << to_call)) {
-			do_IRQ(to_call + IRQ_INTERNAL_BASE);
+			handle_internal(to_call);
+			break;
+		}
+	}
+}
+
+static void __dispatch_internal_64(void)
+{
+	u64 pending;
+	static int i;
+
+	pending = bcm_readq(irq_stat_addr) & bcm_readq(irq_mask_addr);
+
+	if (!pending)
+		return ;
+
+	while (1) {
+		int to_call = i;
+
+		i = (i + 1) & 0x3f;
+		if (pending & (1ull << to_call)) {
+			handle_internal(to_call);
 			break;
 		}
 	}
@@ -60,15 +249,17 @@ asmlinkage void plat_irq_dispatch(void)
 		if (cause & CAUSEF_IP7)
 			do_IRQ(7);
 		if (cause & CAUSEF_IP2)
-			bcm63xx_irq_dispatch_internal();
-		if (cause & CAUSEF_IP3)
-			do_IRQ(IRQ_EXT_0);
-		if (cause & CAUSEF_IP4)
-			do_IRQ(IRQ_EXT_1);
-		if (cause & CAUSEF_IP5)
-			do_IRQ(IRQ_EXT_2);
-		if (cause & CAUSEF_IP6)
-			do_IRQ(IRQ_EXT_3);
+			dispatch_internal();
+		if (!is_ext_irq_cascaded) {
+			if (cause & CAUSEF_IP3)
+				do_IRQ(IRQ_EXT_0);
+			if (cause & CAUSEF_IP4)
+				do_IRQ(IRQ_EXT_1);
+			if (cause & CAUSEF_IP5)
+				do_IRQ(IRQ_EXT_2);
+			if (cause & CAUSEF_IP6)
+				do_IRQ(IRQ_EXT_3);
+		}
 	} while (1);
 }
 
@@ -76,24 +267,50 @@ asmlinkage void plat_irq_dispatch(void)
  * internal IRQs operations: only mask/unmask on PERF irq mask
  * register.
  */
-static inline void bcm63xx_internal_irq_mask(struct irq_data *d)
+static void __internal_irq_mask_32(unsigned int irq)
 {
-	unsigned int irq = d->irq - IRQ_INTERNAL_BASE;
 	u32 mask;
 
-	mask = bcm_perf_readl(PERF_IRQMASK_REG);
+	mask = bcm_readl(irq_mask_addr);
 	mask &= ~(1 << irq);
-	bcm_perf_writel(mask, PERF_IRQMASK_REG);
+	bcm_writel(mask, irq_mask_addr);
 }
 
-static void bcm63xx_internal_irq_unmask(struct irq_data *d)
+static void __internal_irq_mask_64(unsigned int irq)
+{
+	u64 mask;
+
+	mask = bcm_readq(irq_mask_addr);
+	mask &= ~(1ull << irq);
+	bcm_writeq(mask, irq_mask_addr);
+}
+
+static void __internal_irq_unmask_32(unsigned int irq)
 {
-	unsigned int irq = d->irq - IRQ_INTERNAL_BASE;
 	u32 mask;
 
-	mask = bcm_perf_readl(PERF_IRQMASK_REG);
+	mask = bcm_readl(irq_mask_addr);
 	mask |= (1 << irq);
-	bcm_perf_writel(mask, PERF_IRQMASK_REG);
+	bcm_writel(mask, irq_mask_addr);
+}
+
+static void __internal_irq_unmask_64(unsigned int irq)
+{
+	u64 mask;
+
+	mask = bcm_readq(irq_mask_addr);
+	mask |= (1ull << irq);
+	bcm_writeq(mask, irq_mask_addr);
+}
+
+static void bcm63xx_internal_irq_mask(struct irq_data *d)
+{
+	internal_irq_mask(d->irq - IRQ_INTERNAL_BASE);
+}
+
+static void bcm63xx_internal_irq_unmask(struct irq_data *d)
+{
+	internal_irq_unmask(d->irq - IRQ_INTERNAL_BASE);
 }
 
 /*
@@ -102,94 +319,131 @@ static void bcm63xx_internal_irq_unmask(struct irq_data *d)
  */
 static void bcm63xx_external_irq_mask(struct irq_data *d)
 {
-	unsigned int irq = d->irq - IRQ_EXT_BASE;
-	u32 reg;
+	unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
+	u32 reg, regaddr;
 
-	reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
-	reg &= ~EXTIRQ_CFG_MASK(irq);
-	bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
+	regaddr = get_ext_irq_perf_reg(irq);
+	reg = bcm_perf_readl(regaddr);
+
+	if (BCMCPU_IS_6348())
+		reg &= ~EXTIRQ_CFG_MASK_6348(irq % 4);
+	else
+		reg &= ~EXTIRQ_CFG_MASK(irq % 4);
+
+	bcm_perf_writel(reg, regaddr);
+	if (is_ext_irq_cascaded)
+		internal_irq_mask(irq + ext_irq_start);
 }
 
 static void bcm63xx_external_irq_unmask(struct irq_data *d)
 {
-	unsigned int irq = d->irq - IRQ_EXT_BASE;
-	u32 reg;
+	unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
+	u32 reg, regaddr;
 
-	reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
-	reg |= EXTIRQ_CFG_MASK(irq);
-	bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
+	regaddr = get_ext_irq_perf_reg(irq);
+	reg = bcm_perf_readl(regaddr);
+
+	if (BCMCPU_IS_6348())
+		reg |= EXTIRQ_CFG_MASK_6348(irq % 4);
+	else
+		reg |= EXTIRQ_CFG_MASK(irq % 4);
+
+	bcm_perf_writel(reg, regaddr);
+
+	if (is_ext_irq_cascaded)
+		internal_irq_unmask(irq + ext_irq_start);
 }
 
 static void bcm63xx_external_irq_clear(struct irq_data *d)
 {
-	unsigned int irq = d->irq - IRQ_EXT_BASE;
-	u32 reg;
+	unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
+	u32 reg, regaddr;
 
-	reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
-	reg |= EXTIRQ_CFG_CLEAR(irq);
-	bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
-}
+	regaddr = get_ext_irq_perf_reg(irq);
+	reg = bcm_perf_readl(regaddr);
 
-static unsigned int bcm63xx_external_irq_startup(struct irq_data *d)
-{
-	set_c0_status(0x100 << (d->irq - IRQ_MIPS_BASE));
-	irq_enable_hazard();
-	bcm63xx_external_irq_unmask(d);
-	return 0;
-}
+	if (BCMCPU_IS_6348())
+		reg |= EXTIRQ_CFG_CLEAR_6348(irq % 4);
+	else
+		reg |= EXTIRQ_CFG_CLEAR(irq % 4);
 
-static void bcm63xx_external_irq_shutdown(struct irq_data *d)
-{
-	bcm63xx_external_irq_mask(d);
-	clear_c0_status(0x100 << (d->irq - IRQ_MIPS_BASE));
-	irq_disable_hazard();
+	bcm_perf_writel(reg, regaddr);
 }
 
 static int bcm63xx_external_irq_set_type(struct irq_data *d,
 					 unsigned int flow_type)
 {
-	unsigned int irq = d->irq - IRQ_EXT_BASE;
-	u32 reg;
+	unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
+	u32 reg, regaddr;
+	int levelsense, sense, bothedge;
 
 	flow_type &= IRQ_TYPE_SENSE_MASK;
 
 	if (flow_type == IRQ_TYPE_NONE)
 		flow_type = IRQ_TYPE_LEVEL_LOW;
 
-	reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
+	levelsense = sense = bothedge = 0;
 	switch (flow_type) {
 	case IRQ_TYPE_EDGE_BOTH:
-		reg &= ~EXTIRQ_CFG_LEVELSENSE(irq);
-		reg |= EXTIRQ_CFG_BOTHEDGE(irq);
+		bothedge = 1;
 		break;
 
 	case IRQ_TYPE_EDGE_RISING:
-		reg &= ~EXTIRQ_CFG_LEVELSENSE(irq);
-		reg |= EXTIRQ_CFG_SENSE(irq);
-		reg &= ~EXTIRQ_CFG_BOTHEDGE(irq);
+		sense = 1;
 		break;
 
 	case IRQ_TYPE_EDGE_FALLING:
-		reg &= ~EXTIRQ_CFG_LEVELSENSE(irq);
-		reg &= ~EXTIRQ_CFG_SENSE(irq);
-		reg &= ~EXTIRQ_CFG_BOTHEDGE(irq);
 		break;
 
 	case IRQ_TYPE_LEVEL_HIGH:
-		reg |= EXTIRQ_CFG_LEVELSENSE(irq);
-		reg |= EXTIRQ_CFG_SENSE(irq);
+		levelsense = 1;
+		sense = 1;
 		break;
 
 	case IRQ_TYPE_LEVEL_LOW:
-		reg |= EXTIRQ_CFG_LEVELSENSE(irq);
-		reg &= ~EXTIRQ_CFG_SENSE(irq);
+		levelsense = 1;
 		break;
 
 	default:
 		printk(KERN_ERR "bogus flow type combination given !\n");
 		return -EINVAL;
 	}
-	bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
+
+	regaddr = get_ext_irq_perf_reg(irq);
+	reg = bcm_perf_readl(regaddr);
+	irq %= 4;
+
+	if (BCMCPU_IS_6348()) {
+		if (levelsense)
+			reg |= EXTIRQ_CFG_LEVELSENSE_6348(irq);
+		else
+			reg &= ~EXTIRQ_CFG_LEVELSENSE_6348(irq);
+		if (sense)
+			reg |= EXTIRQ_CFG_SENSE_6348(irq);
+		else
+			reg &= ~EXTIRQ_CFG_SENSE_6348(irq);
+		if (bothedge)
+			reg |= EXTIRQ_CFG_BOTHEDGE_6348(irq);
+		else
+			reg &= ~EXTIRQ_CFG_BOTHEDGE_6348(irq);
+	}
+
+	if (BCMCPU_IS_6338() || BCMCPU_IS_6358() || BCMCPU_IS_6368()) {
+		if (levelsense)
+			reg |= EXTIRQ_CFG_LEVELSENSE(irq);
+		else
+			reg &= ~EXTIRQ_CFG_LEVELSENSE(irq);
+		if (sense)
+			reg |= EXTIRQ_CFG_SENSE(irq);
+		else
+			reg &= ~EXTIRQ_CFG_SENSE(irq);
+		if (bothedge)
+			reg |= EXTIRQ_CFG_BOTHEDGE(irq);
+		else
+			reg &= ~EXTIRQ_CFG_BOTHEDGE(irq);
+	}
+
+	bcm_perf_writel(reg, regaddr);
 
 	irqd_set_trigger_type(d, flow_type);
 	if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
@@ -208,9 +462,6 @@ static struct irq_chip bcm63xx_internal_irq_chip = {
 
 static struct irq_chip bcm63xx_external_irq_chip = {
 	.name		= "bcm63xx_epic",
-	.irq_startup	= bcm63xx_external_irq_startup,
-	.irq_shutdown	= bcm63xx_external_irq_shutdown,
-
 	.irq_ack	= bcm63xx_external_irq_clear,
 
 	.irq_mask	= bcm63xx_external_irq_mask,
@@ -225,18 +476,30 @@ static struct irqaction cpu_ip2_cascade_action = {
 	.flags		= IRQF_NO_THREAD,
 };
 
+static struct irqaction cpu_ext_cascade_action = {
+	.handler	= no_action,
+	.name		= "cascade_extirq",
+	.flags		= IRQF_NO_THREAD,
+};
+
 void __init arch_init_irq(void)
 {
 	int i;
 
+	bcm63xx_init_irq();
 	mips_cpu_irq_init();
 	for (i = IRQ_INTERNAL_BASE; i < NR_IRQS; ++i)
 		irq_set_chip_and_handler(i, &bcm63xx_internal_irq_chip,
 					 handle_level_irq);
 
-	for (i = IRQ_EXT_BASE; i < IRQ_EXT_BASE + 4; ++i)
+	for (i = IRQ_EXTERNAL_BASE; i < IRQ_EXTERNAL_BASE + ext_irq_count; ++i)
 		irq_set_chip_and_handler(i, &bcm63xx_external_irq_chip,
 					 handle_edge_irq);
 
-	setup_irq(IRQ_MIPS_BASE + 2, &cpu_ip2_cascade_action);
+	if (!is_ext_irq_cascaded) {
+		for (i = 3; i < 3 + ext_irq_count; ++i)
+			setup_irq(MIPS_CPU_IRQ_BASE + i, &cpu_ext_cascade_action);
+	}
+
+	setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action);
 }

arch/mips/bcm63xx/prom.c

@@ -32,9 +32,12 @@ void __init prom_init(void)
 		mask = CKCTL_6345_ALL_SAFE_EN;
 	else if (BCMCPU_IS_6348())
 		mask = CKCTL_6348_ALL_SAFE_EN;
-	else
-		/* BCMCPU_IS_6358() */
+	else if (BCMCPU_IS_6358())
 		mask = CKCTL_6358_ALL_SAFE_EN;
+	else if (BCMCPU_IS_6368())
+		mask = CKCTL_6368_ALL_SAFE_EN;
+	else
+		mask = 0;
 
 	reg = bcm_perf_readl(PERF_CKCTL_REG);
 	reg &= ~mask;

arch/mips/bcm63xx/setup.c

@@ -63,13 +63,33 @@ static void bcm6348_a1_reboot(void)
 
 void bcm63xx_machine_reboot(void)
 {
-	u32 reg;
+	u32 reg, perf_regs[2] = { 0, 0 };
+	unsigned int i;
 
 	/* mask and clear all external irq */
-	reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
-	reg &= ~EXTIRQ_CFG_MASK_ALL;
-	reg |= EXTIRQ_CFG_CLEAR_ALL;
-	bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
+	switch (bcm63xx_get_cpu_id()) {
+	case BCM6338_CPU_ID:
+		perf_regs[0] = PERF_EXTIRQ_CFG_REG_6338;
+		break;
+	case BCM6348_CPU_ID:
+		perf_regs[0] = PERF_EXTIRQ_CFG_REG_6348;
+		break;
+	case BCM6358_CPU_ID:
+		perf_regs[0] = PERF_EXTIRQ_CFG_REG_6358;
+		break;
+	}
+
+	for (i = 0; i < 2; i++) {
+		reg = bcm_perf_readl(perf_regs[i]);
+		if (BCMCPU_IS_6348()) {
+			reg &= ~EXTIRQ_CFG_MASK_ALL_6348;
+			reg |= EXTIRQ_CFG_CLEAR_ALL_6348;
+		} else {
+			reg &= ~EXTIRQ_CFG_MASK_ALL;
+			reg |= EXTIRQ_CFG_CLEAR_ALL;
+		}
+		bcm_perf_writel(reg, perf_regs[i]);
+	}
 
 	if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() == 0xa1))
 		bcm6348_a1_reboot();
@@ -124,4 +144,4 @@ int __init bcm63xx_register_devices(void)
 	return board_register_devices();
 }
 
-arch_initcall(bcm63xx_register_devices);
+device_initcall(bcm63xx_register_devices);

arch/mips/boot/compressed/uart-alchemy.c

@@ -2,6 +2,9 @@
 
 void putc(char c)
 {
-	/* all current (Jan. 2010) in-kernel boards */
+#ifdef CONFIG_MIPS_DB1300
+	alchemy_uart_putchar(AU1300_UART2_PHYS_ADDR, c);
+#else
 	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
+#endif
 }

arch/mips/cavium-octeon/Kconfig

@@ -86,10 +86,6 @@ config ARCH_SPARSEMEM_ENABLE
 	def_bool y
 	select SPARSEMEM_STATIC
 
-config CAVIUM_OCTEON_HELPER
-	def_bool y
-	depends on OCTEON_ETHERNET || PCI
-
 config IOMMU_HELPER
 	bool
 

arch/mips/cavium-octeon/dma-octeon.c

@@ -61,6 +61,16 @@ static phys_addr_t octeon_gen1_dma_to_phys(struct device *dev, dma_addr_t daddr)
 	return daddr;
 }
 
+static dma_addr_t octeon_gen2_phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	return octeon_hole_phys_to_dma(paddr);
+}
+
+static phys_addr_t octeon_gen2_dma_to_phys(struct device *dev, dma_addr_t daddr)
+{
+	return octeon_hole_dma_to_phys(daddr);
+}
+
 static dma_addr_t octeon_big_phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
 	if (paddr >= 0x410000000ull && paddr < 0x420000000ull)
@@ -262,11 +272,11 @@ void __init plat_swiotlb_setup(void)
 
 	for (i = 0 ; i < boot_mem_map.nr_map; i++) {
 		struct boot_mem_map_entry *e = &boot_mem_map.map[i];
-		if (e->type != BOOT_MEM_RAM)
+		if (e->type != BOOT_MEM_RAM && e->type != BOOT_MEM_INIT_RAM)
 			continue;
 
 		/* These addresses map low for PCI. */
-		if (e->addr > 0x410000000ull)
+		if (e->addr > 0x410000000ull && !OCTEON_IS_MODEL(OCTEON_CN6XXX))
 			continue;
 
 		addr_size += e->size;
@@ -295,6 +305,11 @@ void __init plat_swiotlb_setup(void)
 		 */
 		swiotlbsize = 64 * (1<<20);
 	}
+#endif
+#ifdef CONFIG_USB_OCTEON_OHCI
+	/* OCTEON II ohci is only 32-bit. */
+	if (OCTEON_IS_MODEL(OCTEON_CN6XXX) && max_addr >= 0x100000000ul)
+		swiotlbsize = 64 * (1<<20);
 #endif
 	swiotlb_nslabs = swiotlbsize >> IO_TLB_SHIFT;
 	swiotlb_nslabs = ALIGN(swiotlb_nslabs, IO_TLB_SEGSIZE);
@@ -330,6 +345,10 @@ struct dma_map_ops *octeon_pci_dma_map_ops;
 void __init octeon_pci_dma_init(void)
 {
 	switch (octeon_dma_bar_type) {
+	case OCTEON_DMA_BAR_TYPE_PCIE2:
+		_octeon_pci_dma_map_ops.phys_to_dma = octeon_gen2_phys_to_dma;
+		_octeon_pci_dma_map_ops.dma_to_phys = octeon_gen2_dma_to_phys;
+		break;
 	case OCTEON_DMA_BAR_TYPE_PCIE:
 		_octeon_pci_dma_map_ops.phys_to_dma = octeon_gen1_phys_to_dma;
 		_octeon_pci_dma_map_ops.dma_to_phys = octeon_gen1_dma_to_phys;

arch/mips/cavium-octeon/executive/Makefile

@@ -10,5 +10,10 @@
 #
 
 obj-y += cvmx-bootmem.o cvmx-l2c.o cvmx-sysinfo.o octeon-model.o
+obj-y += cvmx-pko.o cvmx-spi.o cvmx-cmd-queue.o \
+	cvmx-helper-board.o cvmx-helper.o cvmx-helper-xaui.o \
+	cvmx-helper-rgmii.o cvmx-helper-sgmii.o cvmx-helper-npi.o \
+	cvmx-helper-loop.o cvmx-helper-spi.o cvmx-helper-util.o \
+	cvmx-interrupt-decodes.o cvmx-interrupt-rsl.o
 
-obj-$(CONFIG_CAVIUM_OCTEON_HELPER) += cvmx-helper-errata.o cvmx-helper-jtag.o
+obj-y += cvmx-helper-errata.o cvmx-helper-jtag.o

drivers/staging/octeon/cvmx-cmd-queue.c → arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c

@@ -34,13 +34,13 @@
 
 #include <asm/octeon/octeon.h>
 
-#include "cvmx-config.h"
-#include "cvmx-fpa.h"
-#include "cvmx-cmd-queue.h"
+#include <asm/octeon/cvmx-config.h>
+#include <asm/octeon/cvmx-fpa.h>
+#include <asm/octeon/cvmx-cmd-queue.h>
 
 #include <asm/octeon/cvmx-npei-defs.h>
 #include <asm/octeon/cvmx-pexp-defs.h>
-#include "cvmx-pko-defs.h"
+#include <asm/octeon/cvmx-pko-defs.h>
 
 /**
  * This application uses this pointer to access the global queue

drivers/staging/octeon/cvmx-helper-board.c → arch/mips/cavium-octeon/executive/cvmx-helper-board.c

@@ -34,16 +34,16 @@
 #include <asm/octeon/octeon.h>
 #include <asm/octeon/cvmx-bootinfo.h>
 
-#include "cvmx-config.h"
+#include <asm/octeon/cvmx-config.h>
 
-#include "cvmx-mdio.h"
+#include <asm/octeon/cvmx-mdio.h>
 
-#include "cvmx-helper.h"
-#include "cvmx-helper-util.h"
-#include "cvmx-helper-board.h"
+#include <asm/octeon/cvmx-helper.h>
+#include <asm/octeon/cvmx-helper-util.h>
+#include <asm/octeon/cvmx-helper-board.h>
 
-#include "cvmx-gmxx-defs.h"
-#include "cvmx-asxx-defs.h"
+#include <asm/octeon/cvmx-gmxx-defs.h>
+#include <asm/octeon/cvmx-asxx-defs.h>
 
 /**
  * cvmx_override_board_link_get(int ipd_port) is a function
@@ -117,6 +117,10 @@ int cvmx_helper_board_get_mii_address(int ipd_port)
 	case CVMX_BOARD_TYPE_EBH5200:
 	case CVMX_BOARD_TYPE_EBH5201:
 	case CVMX_BOARD_TYPE_EBT5200:
+		/* Board has 2 management ports */
+		if ((ipd_port >= CVMX_HELPER_BOARD_MGMT_IPD_PORT) &&
+		    (ipd_port < (CVMX_HELPER_BOARD_MGMT_IPD_PORT + 2)))
+			return ipd_port - CVMX_HELPER_BOARD_MGMT_IPD_PORT;
 		/*
 		 * Board has 4 SGMII ports. The PHYs start right after the MII
 		 * ports MII0 = 0, MII1 = 1, SGMII = 2-5.
@@ -128,6 +132,9 @@ int cvmx_helper_board_get_mii_address(int ipd_port)
 	case CVMX_BOARD_TYPE_EBH5600:
 	case CVMX_BOARD_TYPE_EBH5601:
 	case CVMX_BOARD_TYPE_EBH5610:
+		/* Board has 1 management port */
+		if (ipd_port == CVMX_HELPER_BOARD_MGMT_IPD_PORT)
+			return 0;
 		/*
 		 * Board has 8 SGMII ports. 4 connect out, two connect
 		 * to a switch, and 2 loop to each other
@@ -147,6 +154,19 @@ int cvmx_helper_board_get_mii_address(int ipd_port)
 			return ipd_port - 16 + 1;
 		else
 			return -1;
+	case CVMX_BOARD_TYPE_NIC_XLE_10G:
+	case CVMX_BOARD_TYPE_NIC10E:
+		return -1;
+	case CVMX_BOARD_TYPE_NIC4E:
+		if (ipd_port >= 0 && ipd_port <= 3)
+			return (ipd_port + 0x1f) & 0x1f;
+		else
+			return -1;
+	case CVMX_BOARD_TYPE_NIC2E:
+		if (ipd_port >= 0 && ipd_port <= 1)
+			return ipd_port + 1;
+		else
+			return -1;
 	case CVMX_BOARD_TYPE_BBGW_REF:
 		/*
 		 * No PHYs are connected to Octeon, everything is
@@ -493,7 +513,6 @@ int cvmx_helper_board_link_set_phy(int phy_addr,
 		cvmx_mdio_phy_reg_control_t reg_control;
 		cvmx_mdio_phy_reg_status_t reg_status;
 		cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
-		cvmx_mdio_phy_reg_extended_status_t reg_extended_status;
 		cvmx_mdio_phy_reg_control_1000_t reg_control_1000;
 
 		reg_status.u16 =
@@ -508,9 +527,6 @@ int cvmx_helper_board_link_set_phy(int phy_addr,
 		reg_autoneg_adver.s.advert_100base_tx_full = 0;
 		reg_autoneg_adver.s.advert_100base_tx_half = 0;
 		if (reg_status.s.capable_extended_status) {
-			reg_extended_status.u16 =
-			    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
-					   CVMX_MDIO_PHY_REG_EXTENDED_STATUS);
 			reg_control_1000.u16 =
 			    cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff,
 					   CVMX_MDIO_PHY_REG_CONTROL_1000);

drivers/staging/octeon/cvmx-helper-loop.c → arch/mips/cavium-octeon/executive/cvmx-helper-loop.c

@@ -31,10 +31,10 @@
  */
 #include <asm/octeon/octeon.h>
 
-#include "cvmx-config.h"
+#include <asm/octeon/cvmx-config.h>
 
-#include "cvmx-helper.h"
-#include "cvmx-pip-defs.h"
+#include <asm/octeon/cvmx-helper.h>
+#include <asm/octeon/cvmx-pip-defs.h>
 
 /**
  * Probe a LOOP interface and determine the number of ports

drivers/staging/octeon/cvmx-helper-npi.c → arch/mips/cavium-octeon/executive/cvmx-helper-npi.c

@@ -31,11 +31,11 @@
  */
 #include <asm/octeon/octeon.h>
 
-#include "cvmx-config.h"
+#include <asm/octeon/cvmx-config.h>
 
-#include "cvmx-helper.h"
+#include <asm/octeon/cvmx-helper.h>
 
-#include "cvmx-pip-defs.h"
+#include <asm/octeon/cvmx-pip-defs.h>
 
 /**
  * Probe a NPI interface and determine the number of ports

drivers/staging/octeon/cvmx-helper-rgmii.c → arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c

@@ -31,18 +31,18 @@
  */
 #include <asm/octeon/octeon.h>
 
-#include "cvmx-config.h"
+#include <asm/octeon/cvmx-config.h>
 
 
-#include "cvmx-mdio.h"
-#include "cvmx-pko.h"
-#include "cvmx-helper.h"
-#include "cvmx-helper-board.h"
+#include <asm/octeon/cvmx-mdio.h>
+#include <asm/octeon/cvmx-pko.h>
+#include <asm/octeon/cvmx-helper.h>
+#include <asm/octeon/cvmx-helper-board.h>
 
 #include <asm/octeon/cvmx-npi-defs.h>
-#include "cvmx-gmxx-defs.h"
-#include "cvmx-asxx-defs.h"
-#include "cvmx-dbg-defs.h"
+#include <asm/octeon/cvmx-gmxx-defs.h>
+#include <asm/octeon/cvmx-asxx-defs.h>
+#include <asm/octeon/cvmx-dbg-defs.h>
 
 void __cvmx_interrupt_gmxx_enable(int interface);
 void __cvmx_interrupt_asxx_enable(int block);
@@ -326,6 +326,7 @@ int __cvmx_helper_rgmii_link_set(int ipd_port,
 		       cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(interface)) &
 				     ~(1 << index));
 
+	memset(pko_mem_queue_qos_save, 0, sizeof(pko_mem_queue_qos_save));
 	/* Disable all queues so that TX should become idle */
 	for (i = 0; i < cvmx_pko_get_num_queues(ipd_port); i++) {
 		int queue = cvmx_pko_get_base_queue(ipd_port) + i;

drivers/staging/octeon/cvmx-helper-sgmii.c → arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c

@@ -32,14 +32,14 @@
 
 #include <asm/octeon/octeon.h>
 
-#include "cvmx-config.h"
+#include <asm/octeon/cvmx-config.h>
 
-#include "cvmx-mdio.h"
-#include "cvmx-helper.h"
-#include "cvmx-helper-board.h"
+#include <asm/octeon/cvmx-mdio.h>
+#include <asm/octeon/cvmx-helper.h>
+#include <asm/octeon/cvmx-helper-board.h>
 
-#include "cvmx-gmxx-defs.h"
-#include "cvmx-pcsx-defs.h"
+#include <asm/octeon/cvmx-gmxx-defs.h>
+#include <asm/octeon/cvmx-pcsx-defs.h>
 
 void __cvmx_interrupt_gmxx_enable(int interface);
 void __cvmx_interrupt_pcsx_intx_en_reg_enable(int index, int block);
@@ -326,6 +326,10 @@ static int __cvmx_helper_sgmii_hardware_init(int interface, int num_ports)
 	return 0;
 }
 
+int __cvmx_helper_sgmii_enumerate(int interface)
+{
+	return 4;
+}
 /**
  * Probe a SGMII interface and determine the number of ports
  * connected to it. The SGMII interface should still be down after
@@ -347,7 +351,7 @@ int __cvmx_helper_sgmii_probe(int interface)
 	mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
 	mode.s.en = 1;
 	cvmx_write_csr(CVMX_GMXX_INF_MODE(interface), mode.u64);
-	return 4;
+	return __cvmx_helper_sgmii_enumerate(interface);
 }
 
 /**

drivers/staging/octeon/cvmx-helper-spi.c → arch/mips/cavium-octeon/executive/cvmx-helper-spi.c

@@ -35,12 +35,12 @@ void __cvmx_interrupt_stxx_int_msk_enable(int index);
  */
 #include <asm/octeon/octeon.h>
 
-#include "cvmx-config.h"
-#include "cvmx-spi.h"
-#include "cvmx-helper.h"
+#include <asm/octeon/cvmx-config.h>
+#include <asm/octeon/cvmx-spi.h>
+#include <asm/octeon/cvmx-helper.h>
 
-#include "cvmx-pip-defs.h"
-#include "cvmx-pko-defs.h"
+#include <asm/octeon/cvmx-pip-defs.h>
+#include <asm/octeon/cvmx-pko-defs.h>
 
 /*
  * CVMX_HELPER_SPI_TIMEOUT is used to determine how long the SPI
@@ -51,6 +51,16 @@ void __cvmx_interrupt_stxx_int_msk_enable(int index);
 #define CVMX_HELPER_SPI_TIMEOUT 10
 #endif
 
+int __cvmx_helper_spi_enumerate(int interface)
+{
+	if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) &&
+	    cvmx_spi4000_is_present(interface)) {
+		return 10;
+	} else {
+		return 16;
+	}
+}
+
 /**
  * Probe a SPI interface and determine the number of ports
  * connected to it. The SPI interface should still be down after