ARM: OMAP3+: dpll: use DPLLs recalc function instead of omap2_get_dpll_rate

This is a continuation of Mike Turquette's patch "OMAP3+: use
DPLL's round_rate when setting rate".

omap3_noncore_dpll_set_rate() and omap3_noncore_dpll_enable() call
omap2_get_dpll_rate() explicitly. It may be necessary for some
DPLLs to use a different function and so use the DPLLs recalc()
function pointer instead.

An example is the DPLL_ABE on OMAP4 which can have a 4X multiplier
in addition to the usual MN multipler and dividers and therefore
uses a different round_rate and recalc function.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Cc: Mike Turquette <mturquette@ti.com>
Cc: Misael Lopez Cruz <misael.lopez@ti.com>
[paul@pwsan.com: merged this patch with Mike's "use clock's recalc in DPLL
 handling" patch; also reported by Misael]
Signed-off-by: Paul Walmsley <paul@pwsan.com>

arch/arm/mach-omap2/dpll3xxx.c

@@ -390,7 +390,8 @@ int omap3_noncore_dpll_enable(struct clk *clk)
 	 * propagating?
 	 */
 	if (!r)
-		clk->rate = omap2_get_dpll_rate(clk);
+		clk->rate = (clk->recalc) ? clk->recalc(clk) :
+			omap2_get_dpll_rate(clk);
 
 	return r;
 }
@@ -424,6 +425,7 @@ void omap3_noncore_dpll_disable(struct clk *clk)
 int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 {
 	struct clk *new_parent = NULL;
+	unsigned long hw_rate;
 	u16 freqsel = 0;
 	struct dpll_data *dd;
 	int ret;
@@ -435,7 +437,8 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 	if (!dd)
 		return -EINVAL;
 
-	if (rate == omap2_get_dpll_rate(clk))
+	hw_rate = (clk->recalc) ? clk->recalc(clk) : omap2_get_dpll_rate(clk);
+	if (rate == hw_rate)
 		return 0;
 
 	/*