V4L/DVB (7046): Finalise support for the Pinnacle HD 8000i

Correctly set the atatch structures, enable IR, configure the
xc5000 tuner includes.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/dvb/frontends/xc5000.c

@@ -22,7 +22,7 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <linux/delay.h>
 #include <linux/dvb/frontend.h>
 #include <linux/i2c.h>

drivers/media/video/cx88/cx88-dvb.c

@@ -380,6 +380,7 @@ static struct s5h1409_config pinnacle_pctv_hd_800i_config = {
 	.qam_if	       = 44000,
 	.inversion     = S5H1409_INVERSION_OFF,
 	.status_mode   = S5H1409_DEMODLOCKING,
+	.mpeg_timing   = S5H1409_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK,
 };
 
 static struct xc5000_config pinnacle_pctv_hd_800i_tuner_config = {
@@ -643,9 +644,6 @@ static int dvb_register(struct cx8802_dev *dev)
 		}
 		break;
 	case CX88_BOARD_PINNACLE_PCTV_HD_800i:
-		/* Parallel mpeg data port and punctured clock mode */
-		dev->ts_gen_cntrl = 0x04;
-
 		dev->dvb.frontend = dvb_attach(s5h1409_attach,
 					       &pinnacle_pctv_hd_800i_config,
 					       &dev->core->i2c_adap);

drivers/media/video/cx88/cx88-input.c

@@ -224,6 +224,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 	case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
 	case CX88_BOARD_HAUPPAUGE_HVR1100:
 	case CX88_BOARD_HAUPPAUGE_HVR3000:
+	case CX88_BOARD_PINNACLE_PCTV_HD_800i:
 		ir_codes = ir_codes_hauppauge_new;
 		ir_type = IR_TYPE_RC5;
 		ir->sampling = 1;
@@ -443,6 +444,7 @@ void cx88_ir_irq(struct cx88_core *core)
 	case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
 	case CX88_BOARD_HAUPPAUGE_HVR1100:
 	case CX88_BOARD_HAUPPAUGE_HVR3000:
+	case CX88_BOARD_PINNACLE_PCTV_HD_800i:
 		ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7);
 		ir_dprintk("biphase decoded: %x\n", ircode);
 		if ((ircode & 0xfffff000) != 0x3000)

drivers/media/video/cx88/cx88-mpeg.c

@@ -118,8 +118,12 @@ static int cx8802_start_dma(struct cx8802_dev    *dev,
 		case CX88_BOARD_HAUPPAUGE_HVR1300:
 			break;
 		case CX88_BOARD_PINNACLE_PCTV_HD_800i:
-			/* Enable MPEG parallel port */
-			cx_write(MO_PINMUX_IO, 0x80);
+			/* Enable MPEG parallel IO and video signal pins */
+			cx_write(MO_PINMUX_IO, 0x88);
+			cx_write(TS_HW_SOP_CNTRL, (0x47 << 16) | (188 << 4));
+			dev->ts_gen_cntrl = 5;
+			cx_write(TS_SOP_STAT, 0);
+			cx_write(TS_VALERR_CNTRL, 0);
 			udelay(100);
 			break;
 		default: