USB: S3C: Move usb-control.h to platform include

The usb-control.h is needed by ohci-s3c2410.c for both S3C24XX and S3C64XX
architectures, so move it to <plat/usb-control.h>

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

arch/arm/mach-s3c2410/usb-simtec.c

@@ -29,13 +29,14 @@
 
 #include <mach/bast-map.h>
 #include <mach/bast-irq.h>
-#include <mach/usb-control.h>
 #include <mach/regs-gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
+#include <plat/usb-control.h>
 #include <plat/devs.h>
+
 #include "usb-simtec.h"
 
 /* control power and monitor over-current events on various Simtec

arch/arm/mach-s3c2410/include/mach/usb-control.h → arch/arm/plat-s3c/include/plat/usb-control.h

@@ -1,9 +1,9 @@
-/* arch/arm/mach-s3c2410/include/mach/usb-control.h
+/* arch/arm/plat-s3c/include/plat/usb-control.h
  *
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2410 - usb port information
+ * S3C - USB host port information
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,7 +11,7 @@
 */
 
 #ifndef __ASM_ARCH_USBCONTROL_H
-#define __ASM_ARCH_USBCONTROL_H "arch/arm/mach-s3c2410/include/mach/usb-control.h"
+#define __ASM_ARCH_USBCONTROL_H
 
 #define S3C_HCDFLG_USED	(1)
 

drivers/usb/host/ohci-s3c2410.c

@@ -21,8 +21,7 @@
 
 #include <linux/platform_device.h>
 #include <linux/clk.h>
-
-#include <mach/usb-control.h>
+#include <plat/usb-control.h>
 
 #define valid_port(idx) ((idx) == 1 || (idx) == 2)