[SCSI] bnx2i: Bug fixes related to MTU change issue when there are active iscsi sessions

bnx2i driver has to wait and cleanup all iscsi endpoints before
returning from bnx2i_stop(). This is to make sure all chip resources
are freed before chip is reset.

As the requirements for 1G and 10G chipsets is different, added
per-device 'hba_shutdown_tmo' parameter to adapter structure

If the connections are not torn down by the daemon within this timeout
period, 'cid's will be leaked in 10G device. 1G devices are more
flexible and do not leak any resources because the whole chip ports
gets reset when MTU is changed or ethtool selftest is run

fixed a minor issue in bnx2i_ep_poll() which unnecessarily forced
error return code when driver timed out waiting for TCP connect
request to complete

Signed-off-by: Anil Veerabhadrappa <anilgv@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

drivers/scsi/bnx2i/bnx2i.h

@@ -362,6 +362,7 @@ struct bnx2i_hba {
 	u32 num_ccell;
 
 	int ofld_conns_active;
+	wait_queue_head_t eh_wait;
 
 	int max_active_conns;
 	struct iscsi_cid_queue cid_que;
@@ -381,6 +382,7 @@ struct bnx2i_hba {
 	spinlock_t lock;	/* protects hba structure access */
 	struct mutex net_dev_lock;/* sync net device access */
 
+	int hba_shutdown_tmo;
 	/*
 	 * PCI related info.
 	 */

drivers/scsi/bnx2i/bnx2i_init.c

@@ -177,11 +177,22 @@ void bnx2i_stop(void *handle)
 	struct bnx2i_hba *hba = handle;
 
 	/* check if cleanup happened in GOING_DOWN context */
-	clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
 	if (!test_and_clear_bit(ADAPTER_STATE_GOING_DOWN,
 				&hba->adapter_state))
 		iscsi_host_for_each_session(hba->shost,
 					    bnx2i_drop_session);
+
+	/* Wait for all endpoints to be torn down, Chip will be reset once
+	 *  control returns to network driver. So it is required to cleanup and
+	 * release all connection resources before returning from this routine.
+	 */
+	wait_event_interruptible_timeout(hba->eh_wait,
+					 (hba->ofld_conns_active == 0),
+					 hba->hba_shutdown_tmo);
+	/* This flag should be cleared last so that ep_disconnect() gracefully
+	 * cleans up connection context
+	 */
+	clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
 }
 
 /**

drivers/scsi/bnx2i/bnx2i_iscsi.c

@@ -820,6 +820,11 @@ struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic)
 
 	spin_lock_init(&hba->lock);
 	mutex_init(&hba->net_dev_lock);
+	init_waitqueue_head(&hba->eh_wait);
+	if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type))
+		hba->hba_shutdown_tmo = 240 * HZ;
+	else	/* 5706/5708/5709 */
+		hba->hba_shutdown_tmo = 30 * HZ;
 
 	if (iscsi_host_add(shost, &hba->pcidev->dev))
 		goto free_dump_mem;
@@ -1658,8 +1663,8 @@ static struct iscsi_endpoint *bnx2i_ep_connect(struct Scsi_Host *shost,
 		 */
 		hba = bnx2i_check_route(dst_addr);
 
-	if (!hba) {
-		rc = -ENOMEM;
+	if (!hba || test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state)) {
+		rc = -EINVAL;
 		goto check_busy;
 	}
 
@@ -1804,7 +1809,7 @@ static int bnx2i_ep_poll(struct iscsi_endpoint *ep, int timeout_ms)
 					       (bnx2i_ep->state ==
 						EP_STATE_CONNECT_COMPL)),
 					      msecs_to_jiffies(timeout_ms));
-	if (!rc || (bnx2i_ep->state == EP_STATE_OFLD_FAILED))
+	if (bnx2i_ep->state == EP_STATE_OFLD_FAILED)
 		rc = -1;
 
 	if (rc > 0)
@@ -1957,6 +1962,8 @@ return_bnx2i_ep:
 
 	if (!hba->ofld_conns_active)
 		bnx2i_unreg_dev_all();
+
+	wake_up_interruptible(&hba->eh_wait);
 }