Merge branch 'for_3.2/pm-cleanup' of git://gitorious.org/khilman/linux-omap-pm into cleanup

arch/arm/mach-omap2/pm.c

@@ -136,8 +136,8 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
 
 	ret = pwrdm_set_next_pwrst(pwrdm, state);
 	if (ret) {
-		printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
-		       pwrdm->name);
+		pr_err("%s: unable to set state of powerdomain: %s\n",
+		       __func__, pwrdm->name);
 		goto err;
 	}
 
@@ -161,11 +161,11 @@ err:
 }
 
 /*
- * This API is to be called during init to put the various voltage
+ * This API is to be called during init to set the various voltage
  * domains to the voltage as per the opp table. Typically we boot up
  * at the nominal voltage. So this function finds out the rate of
  * the clock associated with the voltage domain, finds out the correct
- * opp entry and puts the voltage domain to the voltage specifies
+ * opp entry and sets the voltage domain to the voltage specified
  * in the opp entry
  */
 static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
@@ -177,21 +177,20 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
 	unsigned long freq, bootup_volt;
 
 	if (!vdd_name || !clk_name || !dev) {
-		printk(KERN_ERR "%s: Invalid parameters!\n", __func__);
+		pr_err("%s: invalid parameters\n", __func__);
 		goto exit;
 	}
 
 	voltdm = omap_voltage_domain_lookup(vdd_name);
 	if (IS_ERR(voltdm)) {
-		printk(KERN_ERR "%s: Unable to get vdd pointer for vdd_%s\n",
+		pr_err("%s: unable to get vdd pointer for vdd_%s\n",
 			__func__, vdd_name);
 		goto exit;
 	}
 
 	clk =  clk_get(NULL, clk_name);
 	if (IS_ERR(clk)) {
-		printk(KERN_ERR "%s: unable to get clk %s\n",
-			__func__, clk_name);
+		pr_err("%s: unable to get clk %s\n", __func__, clk_name);
 		goto exit;
 	}
 
@@ -200,14 +199,14 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
 
 	opp = opp_find_freq_ceil(dev, &freq);
 	if (IS_ERR(opp)) {
-		printk(KERN_ERR "%s: unable to find boot up OPP for vdd_%s\n",
+		pr_err("%s: unable to find boot up OPP for vdd_%s\n",
 			__func__, vdd_name);
 		goto exit;
 	}
 
 	bootup_volt = opp_get_voltage(opp);
 	if (!bootup_volt) {
-		printk(KERN_ERR "%s: unable to find voltage corresponding"
+		pr_err("%s: unable to find voltage corresponding "
 			"to the bootup OPP for vdd_%s\n", __func__, vdd_name);
 		goto exit;
 	}
@@ -216,8 +215,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
 	return 0;
 
 exit:
-	printk(KERN_ERR "%s: Unable to put vdd_%s to its init voltage\n\n",
-		__func__, vdd_name);
+	pr_err("%s: unable to set vdd_%s\n", __func__, vdd_name);
 	return -EINVAL;
 }
 

arch/arm/mach-omap2/pm24xx.c

@@ -53,8 +53,6 @@
 #include "powerdomain.h"
 #include "clockdomain.h"
 
-static int omap2_pm_debug;
-
 #ifdef CONFIG_SUSPEND
 static suspend_state_t suspend_state = PM_SUSPEND_ON;
 static inline bool is_suspending(void)
@@ -96,7 +94,6 @@ static int omap2_fclks_active(void)
 static void omap2_enter_full_retention(void)
 {
 	u32 l;
-	struct timespec ts_preidle, ts_postidle, ts_idle;
 
 	/* There is 1 reference hold for all children of the oscillator
 	 * clock, the following will remove it. If no one else uses the
@@ -124,10 +121,6 @@ static void omap2_enter_full_retention(void)
 
 	omap2_gpio_prepare_for_idle(0);
 
-	if (omap2_pm_debug) {
-		getnstimeofday(&ts_preidle);
-	}
-
 	/* One last check for pending IRQs to avoid extra latency due
 	 * to sleeping unnecessarily. */
 	if (omap_irq_pending())
@@ -155,13 +148,6 @@ static void omap2_enter_full_retention(void)
 		console_unlock();
 
 no_sleep:
-	if (omap2_pm_debug) {
-		unsigned long long tmp;
-
-		getnstimeofday(&ts_postidle);
-		ts_idle = timespec_sub(ts_postidle, ts_preidle);
-		tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
-	}
 	omap2_gpio_resume_after_idle();
 
 	clk_enable(osc_ck);
@@ -219,7 +205,6 @@ static int omap2_allow_mpu_retention(void)
 static void omap2_enter_mpu_retention(void)
 {
 	int only_idle = 0;
-	struct timespec ts_preidle, ts_postidle, ts_idle;
 
 	/* Putting MPU into the WFI state while a transfer is active
 	 * seems to cause the I2C block to timeout. Why? Good question. */
@@ -246,19 +231,7 @@ static void omap2_enter_mpu_retention(void)
 		only_idle = 1;
 	}
 
-	if (omap2_pm_debug) {
-		getnstimeofday(&ts_preidle);
-	}
-
 	omap2_sram_idle();
-
-	if (omap2_pm_debug) {
-		unsigned long long tmp;
-
-		getnstimeofday(&ts_postidle);
-		ts_idle = timespec_sub(ts_postidle, ts_preidle);
-		tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
-	}
 }
 
 static int omap2_can_sleep(void)

arch/arm/mach-omap2/pm34xx.c

@@ -55,7 +55,7 @@
 static suspend_state_t suspend_state = PM_SUSPEND_ON;
 static inline bool is_suspending(void)
 {
-	return (suspend_state != PM_SUSPEND_ON);
+	return (suspend_state != PM_SUSPEND_ON) && console_suspend_enabled;
 }
 #else
 static inline bool is_suspending(void)