|
@@ -53,902 +53,901 @@ static unsigned int hid_mousepoll_interval;
|
|
|
module_param_named(mousepoll, hid_mousepoll_interval, uint, 0644);
|
|
|
MODULE_PARM_DESC(mousepoll, "Polling interval of mice");
|
|
|
|
|
|
-/*
|
|
|
- * Input submission and I/O error handler.
|
|
|
- */
|
|
|
+#define USB_VENDOR_ID_A4TECH 0x09da
|
|
|
+#define USB_DEVICE_ID_A4TECH_WCP32PU 0x0006
|
|
|
|
|
|
-static void hid_io_error(struct hid_device *hid);
|
|
|
+#define USB_VENDOR_ID_AASHIMA 0x06d6
|
|
|
+#define USB_DEVICE_ID_AASHIMA_GAMEPAD 0x0025
|
|
|
+#define USB_DEVICE_ID_AASHIMA_PREDATOR 0x0026
|
|
|
|
|
|
-/* Start up the input URB */
|
|
|
-static int hid_start_in(struct hid_device *hid)
|
|
|
-{
|
|
|
- unsigned long flags;
|
|
|
- int rc = 0;
|
|
|
- struct usbhid_device *usbhid = hid->driver_data;
|
|
|
+#define USB_VENDOR_ID_ACECAD 0x0460
|
|
|
+#define USB_DEVICE_ID_ACECAD_FLAIR 0x0004
|
|
|
+#define USB_DEVICE_ID_ACECAD_302 0x0008
|
|
|
|
|
|
- spin_lock_irqsave(&usbhid->inlock, flags);
|
|
|
- if (hid->open > 0 && !test_bit(HID_SUSPENDED, &usbhid->iofl) &&
|
|
|
- !test_and_set_bit(HID_IN_RUNNING, &usbhid->iofl)) {
|
|
|
- rc = usb_submit_urb(usbhid->urbin, GFP_ATOMIC);
|
|
|
- if (rc != 0)
|
|
|
- clear_bit(HID_IN_RUNNING, &usbhid->iofl);
|
|
|
- }
|
|
|
- spin_unlock_irqrestore(&usbhid->inlock, flags);
|
|
|
- return rc;
|
|
|
-}
|
|
|
+#define USB_VENDOR_ID_AIPTEK 0x08ca
|
|
|
+#define USB_DEVICE_ID_AIPTEK_01 0x0001
|
|
|
+#define USB_DEVICE_ID_AIPTEK_10 0x0010
|
|
|
+#define USB_DEVICE_ID_AIPTEK_20 0x0020
|
|
|
+#define USB_DEVICE_ID_AIPTEK_21 0x0021
|
|
|
+#define USB_DEVICE_ID_AIPTEK_22 0x0022
|
|
|
+#define USB_DEVICE_ID_AIPTEK_23 0x0023
|
|
|
+#define USB_DEVICE_ID_AIPTEK_24 0x0024
|
|
|
|
|
|
-/* I/O retry timer routine */
|
|
|
-static void hid_retry_timeout(unsigned long _hid)
|
|
|
-{
|
|
|
- struct hid_device *hid = (struct hid_device *) _hid;
|
|
|
- struct usbhid_device *usbhid = hid->driver_data;
|
|
|
+#define USB_VENDOR_ID_AIRCABLE 0x16CA
|
|
|
+#define USB_DEVICE_ID_AIRCABLE1 0x1502
|
|
|
|
|
|
- dev_dbg(&usbhid->intf->dev, "retrying intr urb\n");
|
|
|
- if (hid_start_in(hid))
|
|
|
- hid_io_error(hid);
|
|
|
-}
|
|
|
+#define USB_VENDOR_ID_ALCOR 0x058f
|
|
|
+#define USB_DEVICE_ID_ALCOR_USBRS232 0x9720
|
|
|
|
|
|
-/* Workqueue routine to reset the device or clear a halt */
|
|
|
-static void hid_reset(struct work_struct *work)
|
|
|
-{
|
|
|
- struct usbhid_device *usbhid =
|
|
|
- container_of(work, struct usbhid_device, reset_work);
|
|
|
- struct hid_device *hid = usbhid->hid;
|
|
|
- int rc_lock, rc = 0;
|
|
|
+#define USB_VENDOR_ID_ALPS 0x0433
|
|
|
+#define USB_DEVICE_ID_IBM_GAMEPAD 0x1101
|
|
|
|
|
|
- if (test_bit(HID_CLEAR_HALT, &usbhid->iofl)) {
|
|
|
- dev_dbg(&usbhid->intf->dev, "clear halt\n");
|
|
|
- rc = usb_clear_halt(hid_to_usb_dev(hid), usbhid->urbin->pipe);
|
|
|
- clear_bit(HID_CLEAR_HALT, &usbhid->iofl);
|
|
|
- hid_start_in(hid);
|
|
|
- }
|
|
|
+#define USB_VENDOR_ID_APPLE 0x05ac
|
|
|
+#define USB_DEVICE_ID_APPLE_MIGHTYMOUSE 0x0304
|
|
|
+#define USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI 0x020e
|
|
|
+#define USB_DEVICE_ID_APPLE_FOUNTAIN_ISO 0x020f
|
|
|
+#define USB_DEVICE_ID_APPLE_GEYSER_ANSI 0x0214
|
|
|
+#define USB_DEVICE_ID_APPLE_GEYSER_ISO 0x0215
|
|
|
+#define USB_DEVICE_ID_APPLE_GEYSER_JIS 0x0216
|
|
|
+#define USB_DEVICE_ID_APPLE_GEYSER3_ANSI 0x0217
|
|
|
+#define USB_DEVICE_ID_APPLE_GEYSER3_ISO 0x0218
|
|
|
+#define USB_DEVICE_ID_APPLE_GEYSER3_JIS 0x0219
|
|
|
+#define USB_DEVICE_ID_APPLE_GEYSER4_ANSI 0x021a
|
|
|
+#define USB_DEVICE_ID_APPLE_GEYSER4_ISO 0x021b
|
|
|
+#define USB_DEVICE_ID_APPLE_GEYSER4_JIS 0x021c
|
|
|
+#define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY 0x030a
|
|
|
+#define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY 0x030b
|
|
|
+#define USB_DEVICE_ID_APPLE_IR 0x8240
|
|
|
|
|
|
- else if (test_bit(HID_RESET_PENDING, &usbhid->iofl)) {
|
|
|
- dev_dbg(&usbhid->intf->dev, "resetting device\n");
|
|
|
- rc = rc_lock = usb_lock_device_for_reset(hid_to_usb_dev(hid), usbhid->intf);
|
|
|
- if (rc_lock >= 0) {
|
|
|
- rc = usb_reset_composite_device(hid_to_usb_dev(hid), usbhid->intf);
|
|
|
- if (rc_lock)
|
|
|
- usb_unlock_device(hid_to_usb_dev(hid));
|
|
|
- }
|
|
|
- clear_bit(HID_RESET_PENDING, &usbhid->iofl);
|
|
|
- }
|
|
|
+#define USB_VENDOR_ID_ATEN 0x0557
|
|
|
+#define USB_DEVICE_ID_ATEN_UC100KM 0x2004
|
|
|
+#define USB_DEVICE_ID_ATEN_CS124U 0x2202
|
|
|
+#define USB_DEVICE_ID_ATEN_2PORTKVM 0x2204
|
|
|
+#define USB_DEVICE_ID_ATEN_4PORTKVM 0x2205
|
|
|
+#define USB_DEVICE_ID_ATEN_4PORTKVMC 0x2208
|
|
|
|
|
|
- switch (rc) {
|
|
|
- case 0:
|
|
|
- if (!test_bit(HID_IN_RUNNING, &usbhid->iofl))
|
|
|
- hid_io_error(hid);
|
|
|
- break;
|
|
|
- default:
|
|
|
- err("can't reset device, %s-%s/input%d, status %d",
|
|
|
- hid_to_usb_dev(hid)->bus->bus_name,
|
|
|
- hid_to_usb_dev(hid)->devpath,
|
|
|
- usbhid->ifnum, rc);
|
|
|
- /* FALLTHROUGH */
|
|
|
- case -EHOSTUNREACH:
|
|
|
- case -ENODEV:
|
|
|
- case -EINTR:
|
|
|
- break;
|
|
|
- }
|
|
|
-}
|
|
|
+#define USB_VENDOR_ID_BERKSHIRE 0x0c98
|
|
|
+#define USB_DEVICE_ID_BERKSHIRE_PCWD 0x1140
|
|
|
|
|
|
-/* Main I/O error handler */
|
|
|
-static void hid_io_error(struct hid_device *hid)
|
|
|
-{
|
|
|
- unsigned long flags;
|
|
|
- struct usbhid_device *usbhid = hid->driver_data;
|
|
|
+#define USB_VENDOR_ID_CHERRY 0x046a
|
|
|
+#define USB_DEVICE_ID_CHERRY_CYMOTION 0x0023
|
|
|
|
|
|
- spin_lock_irqsave(&usbhid->inlock, flags);
|
|
|
+#define USB_VENDOR_ID_CHIC 0x05fe
|
|
|
+#define USB_DEVICE_ID_CHIC_GAMEPAD 0x0014
|
|
|
|
|
|
- /* Stop when disconnected */
|
|
|
- if (usb_get_intfdata(usbhid->intf) == NULL)
|
|
|
- goto done;
|
|
|
+#define USB_VENDOR_ID_CIDC 0x1677
|
|
|
|
|
|
- /* When an error occurs, retry at increasing intervals */
|
|
|
- if (usbhid->retry_delay == 0) {
|
|
|
- usbhid->retry_delay = 13; /* Then 26, 52, 104, 104, ... */
|
|
|
- usbhid->stop_retry = jiffies + msecs_to_jiffies(1000);
|
|
|
- } else if (usbhid->retry_delay < 100)
|
|
|
- usbhid->retry_delay *= 2;
|
|
|
+#define USB_VENDOR_ID_CODEMERCS 0x07c0
|
|
|
+#define USB_DEVICE_ID_CODEMERCS_IOW_FIRST 0x1500
|
|
|
+#define USB_DEVICE_ID_CODEMERCS_IOW_LAST 0x15ff
|
|
|
|
|
|
- if (time_after(jiffies, usbhid->stop_retry)) {
|
|
|
+#define USB_VENDOR_ID_CYPRESS 0x04b4
|
|
|
+#define USB_DEVICE_ID_CYPRESS_MOUSE 0x0001
|
|
|
+#define USB_DEVICE_ID_CYPRESS_HIDCOM 0x5500
|
|
|
+#define USB_DEVICE_ID_CYPRESS_ULTRAMOUSE 0x7417
|
|
|
|
|
|
- /* Retries failed, so do a port reset */
|
|
|
- if (!test_and_set_bit(HID_RESET_PENDING, &usbhid->iofl)) {
|
|
|
- schedule_work(&usbhid->reset_work);
|
|
|
- goto done;
|
|
|
- }
|
|
|
- }
|
|
|
+#define USB_VENDOR_ID_DELORME 0x1163
|
|
|
+#define USB_DEVICE_ID_DELORME_EARTHMATE 0x0100
|
|
|
+#define USB_DEVICE_ID_DELORME_EM_LT20 0x0200
|
|
|
|
|
|
- mod_timer(&usbhid->io_retry,
|
|
|
- jiffies + msecs_to_jiffies(usbhid->retry_delay));
|
|
|
-done:
|
|
|
- spin_unlock_irqrestore(&usbhid->inlock, flags);
|
|
|
-}
|
|
|
+#define USB_VENDOR_ID_ESSENTIAL_REALITY 0x0d7f
|
|
|
+#define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100
|
|
|
|
|
|
-/*
|
|
|
- * Input interrupt completion handler.
|
|
|
- */
|
|
|
+#define USB_VENDOR_ID_GLAB 0x06c2
|
|
|
+#define USB_DEVICE_ID_4_PHIDGETSERVO_30 0x0038
|
|
|
+#define USB_DEVICE_ID_1_PHIDGETSERVO_30 0x0039
|
|
|
+#define USB_DEVICE_ID_0_0_4_IF_KIT 0x0040
|
|
|
+#define USB_DEVICE_ID_0_16_16_IF_KIT 0x0044
|
|
|
+#define USB_DEVICE_ID_8_8_8_IF_KIT 0x0045
|
|
|
+#define USB_DEVICE_ID_0_8_7_IF_KIT 0x0051
|
|
|
+#define USB_DEVICE_ID_0_8_8_IF_KIT 0x0053
|
|
|
+#define USB_DEVICE_ID_PHIDGET_MOTORCONTROL 0x0058
|
|
|
|
|
|
-static void hid_irq_in(struct urb *urb)
|
|
|
-{
|
|
|
- struct hid_device *hid = urb->context;
|
|
|
- struct usbhid_device *usbhid = hid->driver_data;
|
|
|
- int status;
|
|
|
+#define USB_VENDOR_ID_GRIFFIN 0x077d
|
|
|
+#define USB_DEVICE_ID_POWERMATE 0x0410
|
|
|
+#define USB_DEVICE_ID_SOUNDKNOB 0x04AA
|
|
|
|
|
|
- switch (urb->status) {
|
|
|
- case 0: /* success */
|
|
|
- usbhid->retry_delay = 0;
|
|
|
- hid_input_report(urb->context, HID_INPUT_REPORT,
|
|
|
- urb->transfer_buffer,
|
|
|
- urb->actual_length, 1);
|
|
|
- break;
|
|
|
- case -EPIPE: /* stall */
|
|
|
- clear_bit(HID_IN_RUNNING, &usbhid->iofl);
|
|
|
- set_bit(HID_CLEAR_HALT, &usbhid->iofl);
|
|
|
- schedule_work(&usbhid->reset_work);
|
|
|
- return;
|
|
|
- case -ECONNRESET: /* unlink */
|
|
|
- case -ENOENT:
|
|
|
- case -ESHUTDOWN: /* unplug */
|
|
|
- clear_bit(HID_IN_RUNNING, &usbhid->iofl);
|
|
|
- return;
|
|
|
- case -EILSEQ: /* protocol error or unplug */
|
|
|
- case -EPROTO: /* protocol error or unplug */
|
|
|
- case -ETIME: /* protocol error or unplug */
|
|
|
- case -ETIMEDOUT: /* Should never happen, but... */
|
|
|
- clear_bit(HID_IN_RUNNING, &usbhid->iofl);
|
|
|
- hid_io_error(hid);
|
|
|
- return;
|
|
|
- default: /* error */
|
|
|
- warn("input irq status %d received", urb->status);
|
|
|
- }
|
|
|
+#define USB_VENDOR_ID_GTCO 0x078c
|
|
|
+#define USB_DEVICE_ID_GTCO_90 0x0090
|
|
|
+#define USB_DEVICE_ID_GTCO_100 0x0100
|
|
|
+#define USB_DEVICE_ID_GTCO_101 0x0101
|
|
|
+#define USB_DEVICE_ID_GTCO_103 0x0103
|
|
|
+#define USB_DEVICE_ID_GTCO_104 0x0104
|
|
|
+#define USB_DEVICE_ID_GTCO_105 0x0105
|
|
|
+#define USB_DEVICE_ID_GTCO_106 0x0106
|
|
|
+#define USB_DEVICE_ID_GTCO_107 0x0107
|
|
|
+#define USB_DEVICE_ID_GTCO_108 0x0108
|
|
|
+#define USB_DEVICE_ID_GTCO_200 0x0200
|
|
|
+#define USB_DEVICE_ID_GTCO_201 0x0201
|
|
|
+#define USB_DEVICE_ID_GTCO_202 0x0202
|
|
|
+#define USB_DEVICE_ID_GTCO_203 0x0203
|
|
|
+#define USB_DEVICE_ID_GTCO_204 0x0204
|
|
|
+#define USB_DEVICE_ID_GTCO_205 0x0205
|
|
|
+#define USB_DEVICE_ID_GTCO_206 0x0206
|
|
|
+#define USB_DEVICE_ID_GTCO_207 0x0207
|
|
|
+#define USB_DEVICE_ID_GTCO_300 0x0300
|
|
|
+#define USB_DEVICE_ID_GTCO_301 0x0301
|
|
|
+#define USB_DEVICE_ID_GTCO_302 0x0302
|
|
|
+#define USB_DEVICE_ID_GTCO_303 0x0303
|
|
|
+#define USB_DEVICE_ID_GTCO_304 0x0304
|
|
|
+#define USB_DEVICE_ID_GTCO_305 0x0305
|
|
|
+#define USB_DEVICE_ID_GTCO_306 0x0306
|
|
|
+#define USB_DEVICE_ID_GTCO_307 0x0307
|
|
|
+#define USB_DEVICE_ID_GTCO_308 0x0308
|
|
|
+#define USB_DEVICE_ID_GTCO_309 0x0309
|
|
|
+#define USB_DEVICE_ID_GTCO_400 0x0400
|
|
|
+#define USB_DEVICE_ID_GTCO_401 0x0401
|
|
|
+#define USB_DEVICE_ID_GTCO_402 0x0402
|
|
|
+#define USB_DEVICE_ID_GTCO_403 0x0403
|
|
|
+#define USB_DEVICE_ID_GTCO_404 0x0404
|
|
|
+#define USB_DEVICE_ID_GTCO_405 0x0405
|
|
|
+#define USB_DEVICE_ID_GTCO_500 0x0500
|
|
|
+#define USB_DEVICE_ID_GTCO_501 0x0501
|
|
|
+#define USB_DEVICE_ID_GTCO_502 0x0502
|
|
|
+#define USB_DEVICE_ID_GTCO_503 0x0503
|
|
|
+#define USB_DEVICE_ID_GTCO_504 0x0504
|
|
|
+#define USB_DEVICE_ID_GTCO_1000 0x1000
|
|
|
+#define USB_DEVICE_ID_GTCO_1001 0x1001
|
|
|
+#define USB_DEVICE_ID_GTCO_1002 0x1002
|
|
|
+#define USB_DEVICE_ID_GTCO_1003 0x1003
|
|
|
+#define USB_DEVICE_ID_GTCO_1004 0x1004
|
|
|
+#define USB_DEVICE_ID_GTCO_1005 0x1005
|
|
|
+#define USB_DEVICE_ID_GTCO_1006 0x1006
|
|
|
|
|
|
- status = usb_submit_urb(urb, GFP_ATOMIC);
|
|
|
- if (status) {
|
|
|
- clear_bit(HID_IN_RUNNING, &usbhid->iofl);
|
|
|
- if (status != -EPERM) {
|
|
|
- err("can't resubmit intr, %s-%s/input%d, status %d",
|
|
|
- hid_to_usb_dev(hid)->bus->bus_name,
|
|
|
- hid_to_usb_dev(hid)->devpath,
|
|
|
- usbhid->ifnum, status);
|
|
|
- hid_io_error(hid);
|
|
|
- }
|
|
|
- }
|
|
|
-}
|
|
|
+#define USB_VENDOR_ID_HAPP 0x078b
|
|
|
+#define USB_DEVICE_ID_UGCI_DRIVING 0x0010
|
|
|
+#define USB_DEVICE_ID_UGCI_FLYING 0x0020
|
|
|
+#define USB_DEVICE_ID_UGCI_FIGHTING 0x0030
|
|
|
|
|
|
-static int hid_submit_out(struct hid_device *hid)
|
|
|
-{
|
|
|
- struct hid_report *report;
|
|
|
- struct usbhid_device *usbhid = hid->driver_data;
|
|
|
+#define USB_VENDOR_ID_IMATION 0x0718
|
|
|
+#define USB_DEVICE_ID_DISC_STAKKA 0xd000
|
|
|
|
|
|
- report = usbhid->out[usbhid->outtail];
|
|
|
+#define USB_VENDOR_ID_KBGEAR 0x084e
|
|
|
+#define USB_DEVICE_ID_KBGEAR_JAMSTUDIO 0x1001
|
|
|
|
|
|
- hid_output_report(report, usbhid->outbuf);
|
|
|
- usbhid->urbout->transfer_buffer_length = ((report->size - 1) >> 3) + 1 + (report->id > 0);
|
|
|
- usbhid->urbout->dev = hid_to_usb_dev(hid);
|
|
|
+#define USB_VENDOR_ID_LD 0x0f11
|
|
|
+#define USB_DEVICE_ID_LD_CASSY 0x1000
|
|
|
+#define USB_DEVICE_ID_LD_POCKETCASSY 0x1010
|
|
|
+#define USB_DEVICE_ID_LD_MOBILECASSY 0x1020
|
|
|
+#define USB_DEVICE_ID_LD_JWM 0x1080
|
|
|
+#define USB_DEVICE_ID_LD_DMMP 0x1081
|
|
|
+#define USB_DEVICE_ID_LD_UMIP 0x1090
|
|
|
+#define USB_DEVICE_ID_LD_XRAY1 0x1100
|
|
|
+#define USB_DEVICE_ID_LD_XRAY2 0x1101
|
|
|
+#define USB_DEVICE_ID_LD_VIDEOCOM 0x1200
|
|
|
+#define USB_DEVICE_ID_LD_COM3LAB 0x2000
|
|
|
+#define USB_DEVICE_ID_LD_TELEPORT 0x2010
|
|
|
+#define USB_DEVICE_ID_LD_NETWORKANALYSER 0x2020
|
|
|
+#define USB_DEVICE_ID_LD_POWERCONTROL 0x2030
|
|
|
+#define USB_DEVICE_ID_LD_MACHINETEST 0x2040
|
|
|
|
|
|
- dbg("submitting out urb");
|
|
|
+#define USB_VENDOR_ID_LOGITECH 0x046d
|
|
|
+#define USB_DEVICE_ID_LOGITECH_USB_RECEIVER 0xc101
|
|
|
+#define USB_DEVICE_ID_LOGITECH_USB_RECEIVER_2 0xc517
|
|
|
+#define USB_DEVICE_ID_DINOVO_EDGE 0xc714
|
|
|
|
|
|
- if (usb_submit_urb(usbhid->urbout, GFP_ATOMIC)) {
|
|
|
- err("usb_submit_urb(out) failed");
|
|
|
- return -1;
|
|
|
- }
|
|
|
+#define USB_VENDOR_ID_MCC 0x09db
|
|
|
+#define USB_DEVICE_ID_MCC_PMD1024LS 0x0076
|
|
|
+#define USB_DEVICE_ID_MCC_PMD1208LS 0x007a
|
|
|
|
|
|
- return 0;
|
|
|
-}
|
|
|
+#define USB_VENDOR_ID_MGE 0x0463
|
|
|
+#define USB_DEVICE_ID_MGE_UPS 0xffff
|
|
|
+#define USB_DEVICE_ID_MGE_UPS1 0x0001
|
|
|
+
|
|
|
+#define USB_VENDOR_ID_NEC 0x073e
|
|
|
+#define USB_DEVICE_ID_NEC_USB_GAME_PAD 0x0301
|
|
|
+
|
|
|
+#define USB_VENDOR_ID_ONTRAK 0x0a07
|
|
|
+#define USB_DEVICE_ID_ONTRAK_ADU100 0x0064
|
|
|
+
|
|
|
+#define USB_VENDOR_ID_PANJIT 0x134c
|
|
|
+
|
|
|
+#define USB_VENDOR_ID_PANTHERLORD 0x0810
|
|
|
+#define USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK 0x0001
|
|
|
+
|
|
|
+#define USB_VENDOR_ID_SAITEK 0x06a3
|
|
|
+#define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17
|
|
|
+
|
|
|
+#define USB_VENDOR_ID_SONY 0x054c
|
|
|
+#define USB_DEVICE_ID_SONY_PS3_CONTROLLER 0x0268
|
|
|
+
|
|
|
+#define USB_VENDOR_ID_SUN 0x0430
|
|
|
+#define USB_DEVICE_ID_RARITAN_KVM_DONGLE 0xcdab
|
|
|
+
|
|
|
+#define USB_VENDOR_ID_TOPMAX 0x0663
|
|
|
+#define USB_DEVICE_ID_TOPMAX_COBRAPAD 0x0103
|
|
|
+
|
|
|
+#define USB_VENDOR_ID_TURBOX 0x062a
|
|
|
+#define USB_DEVICE_ID_TURBOX_KEYBOARD 0x0201
|
|
|
+
|
|
|
+#define USB_VENDOR_ID_VERNIER 0x08f7
|
|
|
+#define USB_DEVICE_ID_VERNIER_LABPRO 0x0001
|
|
|
+#define USB_DEVICE_ID_VERNIER_GOTEMP 0x0002
|
|
|
+#define USB_DEVICE_ID_VERNIER_SKIP 0x0003
|
|
|
+#define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004
|
|
|
+
|
|
|
+#define USB_VENDOR_ID_WACOM 0x056a
|
|
|
+
|
|
|
+#define USB_VENDOR_ID_WISEGROUP 0x0925
|
|
|
+#define USB_DEVICE_ID_1_PHIDGETSERVO_20 0x8101
|
|
|
+#define USB_DEVICE_ID_4_PHIDGETSERVO_20 0x8104
|
|
|
+#define USB_DEVICE_ID_8_8_4_IF_KIT 0x8201
|
|
|
+#define USB_DEVICE_ID_DUAL_USB_JOYPAD 0x8866
|
|
|
+
|
|
|
+#define USB_VENDOR_ID_WISEGROUP_LTD 0x6677
|
|
|
+#define USB_DEVICE_ID_SMARTJOY_DUAL_PLUS 0x8802
|
|
|
+
|
|
|
+#define USB_VENDOR_ID_YEALINK 0x6993
|
|
|
+#define USB_DEVICE_ID_YEALINK_P1K_P4K_B2K 0xb001
|
|
|
+
|
|
|
+/*
|
|
|
+ * Alphabetically sorted blacklist by quirk type.
|
|
|
+ */
|
|
|
+
|
|
|
+static const struct hid_blacklist {
|
|
|
+ __u16 idVendor;
|
|
|
+ __u16 idProduct;
|
|
|
+ unsigned quirks;
|
|
|
+} hid_blacklist[] = {
|
|
|
+
|
|
|
+ { USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU, HID_QUIRK_2WHEEL_MOUSE_HACK_7 },
|
|
|
+ { USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE, HID_QUIRK_2WHEEL_MOUSE_HACK_5 },
|
|
|
+
|
|
|
+ { USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_USB_RECEIVER, HID_QUIRK_BAD_RELATIVE_KEYS },
|
|
|
+
|
|
|
+ { USB_VENDOR_ID_AASHIMA, USB_DEVICE_ID_AASHIMA_GAMEPAD, HID_QUIRK_BADPAD },
|
|
|
+ { USB_VENDOR_ID_AASHIMA, USB_DEVICE_ID_AASHIMA_PREDATOR, HID_QUIRK_BADPAD },
|
|
|
+ { USB_VENDOR_ID_ALPS, USB_DEVICE_ID_IBM_GAMEPAD, HID_QUIRK_BADPAD },
|
|
|
+ { USB_VENDOR_ID_CHIC, USB_DEVICE_ID_CHIC_GAMEPAD, HID_QUIRK_BADPAD },
|
|
|
+ { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
|
|
|
+ { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
|
|
|
+ { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
|
|
|
+ { USB_VENDOR_ID_NEC, USB_DEVICE_ID_NEC_USB_GAME_PAD, HID_QUIRK_BADPAD },
|
|
|
+ { USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RUMBLEPAD, HID_QUIRK_BADPAD },
|
|
|
+ { USB_VENDOR_ID_TOPMAX, USB_DEVICE_ID_TOPMAX_COBRAPAD, HID_QUIRK_BADPAD },
|
|
|
+
|
|
|
+ { USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION, HID_QUIRK_CYMOTION },
|
|
|
+
|
|
|
+ { USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_EDGE, HID_QUIRK_DUPLICATE_USAGES },
|
|
|
+
|
|
|
+ { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_01, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_10, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_20, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_21, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_22, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_23, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_AIRCABLE, USB_DEVICE_ID_AIRCABLE1, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IR, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_CIDC, 0x0103, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_HIDCOM, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_ULTRAMOUSE, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_4_PHIDGETSERVO_30, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_1_PHIDGETSERVO_30, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_0_4_IF_KIT, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_16_16_IF_KIT, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_8_8_8_IF_KIT, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_8_7_IF_KIT, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_8_8_IF_KIT, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_PHIDGET_MOTORCONTROL, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_90, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_100, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_101, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_103, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_104, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_105, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_106, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_107, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_108, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_200, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_201, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_202, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_203, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_204, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_205, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_206, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_207, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_300, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_301, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_302, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_303, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_304, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_305, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_306, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_307, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_308, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_309, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_400, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_401, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_402, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_403, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_404, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_405, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_500, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_501, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_502, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_503, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_504, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1000, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1001, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1002, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1003, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1004, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1005, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1006, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_IMATION, USB_DEVICE_ID_DISC_STAKKA, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOBILECASSY, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_JWM, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_DMMP, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_UMIP, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY1, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY2, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_VIDEOCOM, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_COM3LAB, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_TELEPORT, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1024LS, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1208LS, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS1, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 20, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 30, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 100, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 108, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 118, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 200, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 300, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 400, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 500, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_PANJIT, 0x0001, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_PANJIT, 0x0002, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_PANJIT, 0x0003, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_PANJIT, 0x0004, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_8_8_4_IF_KIT, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_YEALINK, USB_DEVICE_ID_YEALINK_P1K_P4K_B2K, HID_QUIRK_IGNORE },
|
|
|
|
|
|
-static int hid_submit_ctrl(struct hid_device *hid)
|
|
|
-{
|
|
|
- struct hid_report *report;
|
|
|
- unsigned char dir;
|
|
|
- int len;
|
|
|
- struct usbhid_device *usbhid = hid->driver_data;
|
|
|
+ { USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR, HID_QUIRK_IGNORE },
|
|
|
+ { USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_302, HID_QUIRK_IGNORE },
|
|
|
|
|
|
- report = usbhid->ctrl[usbhid->ctrltail].report;
|
|
|
- dir = usbhid->ctrl[usbhid->ctrltail].dir;
|
|
|
+ { USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_USB_RECEIVER_2, HID_QUIRK_LOGITECH_S510_DESCRIPTOR },
|
|
|
|
|
|
- len = ((report->size - 1) >> 3) + 1 + (report->id > 0);
|
|
|
- if (dir == USB_DIR_OUT) {
|
|
|
- hid_output_report(report, usbhid->ctrlbuf);
|
|
|
- usbhid->urbctrl->pipe = usb_sndctrlpipe(hid_to_usb_dev(hid), 0);
|
|
|
- usbhid->urbctrl->transfer_buffer_length = len;
|
|
|
- } else {
|
|
|
- int maxpacket, padlen;
|
|
|
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE, HID_QUIRK_MIGHTYMOUSE | HID_QUIRK_INVERT_HWHEEL },
|
|
|
|
|
|
- usbhid->urbctrl->pipe = usb_rcvctrlpipe(hid_to_usb_dev(hid), 0);
|
|
|
- maxpacket = usb_maxpacket(hid_to_usb_dev(hid), usbhid->urbctrl->pipe, 0);
|
|
|
- if (maxpacket > 0) {
|
|
|
- padlen = (len + maxpacket - 1) / maxpacket;
|
|
|
- padlen *= maxpacket;
|
|
|
- if (padlen > usbhid->bufsize)
|
|
|
- padlen = usbhid->bufsize;
|
|
|
- } else
|
|
|
- padlen = 0;
|
|
|
- usbhid->urbctrl->transfer_buffer_length = padlen;
|
|
|
- }
|
|
|
- usbhid->urbctrl->dev = hid_to_usb_dev(hid);
|
|
|
+ { USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS },
|
|
|
|
|
|
- usbhid->cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | dir;
|
|
|
- usbhid->cr->bRequest = (dir == USB_DIR_OUT) ? HID_REQ_SET_REPORT : HID_REQ_GET_REPORT;
|
|
|
- usbhid->cr->wValue = cpu_to_le16(((report->type + 1) << 8) | report->id);
|
|
|
- usbhid->cr->wIndex = cpu_to_le16(usbhid->ifnum);
|
|
|
- usbhid->cr->wLength = cpu_to_le16(len);
|
|
|
+ { USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER, HID_QUIRK_SONY_PS3_CONTROLLER },
|
|
|
|
|
|
- dbg("submitting ctrl urb: %s wValue=0x%04x wIndex=0x%04x wLength=%u",
|
|
|
- usbhid->cr->bRequest == HID_REQ_SET_REPORT ? "Set_Report" : "Get_Report",
|
|
|
- usbhid->cr->wValue, usbhid->cr->wIndex, usbhid->cr->wLength);
|
|
|
+ { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET },
|
|
|
+ { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS124U, HID_QUIRK_NOGET },
|
|
|
+ { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET },
|
|
|
+ { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
|
|
|
+ { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
|
|
|
+ { USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
|
|
|
+ { USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD, HID_QUIRK_NOGET },
|
|
|
+ { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
|
|
|
+ { USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SMARTJOY_DUAL_PLUS, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
|
|
|
|
|
|
- if (usb_submit_urb(usbhid->urbctrl, GFP_ATOMIC)) {
|
|
|
- err("usb_submit_urb(ctrl) failed");
|
|
|
- return -1;
|
|
|
- }
|
|
|
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
|
|
|
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
|
|
|
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
|
|
|
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
|
|
|
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_JIS, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
|
|
|
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ANSI, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
|
|
|
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
|
|
|
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
|
|
|
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
|
|
|
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
|
|
|
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
|
|
|
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
|
|
|
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
|
|
|
|
|
|
- return 0;
|
|
|
-}
|
|
|
+ { 0, 0 }
|
|
|
+};
|
|
|
|
|
|
/*
|
|
|
- * Output interrupt completion handler.
|
|
|
+ * Input submission and I/O error handler.
|
|
|
*/
|
|
|
|
|
|
-static void hid_irq_out(struct urb *urb)
|
|
|
+static void hid_io_error(struct hid_device *hid);
|
|
|
+
|
|
|
+/* Start up the input URB */
|
|
|
+static int hid_start_in(struct hid_device *hid)
|
|
|
{
|
|
|
- struct hid_device *hid = urb->context;
|
|
|
- struct usbhid_device *usbhid = hid->driver_data;
|
|
|
unsigned long flags;
|
|
|
- int unplug = 0;
|
|
|
-
|
|
|
- switch (urb->status) {
|
|
|
- case 0: /* success */
|
|
|
- break;
|
|
|
- case -ESHUTDOWN: /* unplug */
|
|
|
- unplug = 1;
|
|
|
- case -EILSEQ: /* protocol error or unplug */
|
|
|
- case -EPROTO: /* protocol error or unplug */
|
|
|
- case -ECONNRESET: /* unlink */
|
|
|
- case -ENOENT:
|
|
|
- break;
|
|
|
- default: /* error */
|
|
|
- warn("output irq status %d received", urb->status);
|
|
|
- }
|
|
|
-
|
|
|
- spin_lock_irqsave(&usbhid->outlock, flags);
|
|
|
-
|
|
|
- if (unplug)
|
|
|
- usbhid->outtail = usbhid->outhead;
|
|
|
- else
|
|
|
- usbhid->outtail = (usbhid->outtail + 1) & (HID_OUTPUT_FIFO_SIZE - 1);
|
|
|
+ int rc = 0;
|
|
|
+ struct usbhid_device *usbhid = hid->driver_data;
|
|
|
|
|
|
- if (usbhid->outhead != usbhid->outtail) {
|
|
|
- if (hid_submit_out(hid)) {
|
|
|
- clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
|
|
|
- wake_up(&hid->wait);
|
|
|
- }
|
|
|
- spin_unlock_irqrestore(&usbhid->outlock, flags);
|
|
|
- return;
|
|
|
+ spin_lock_irqsave(&usbhid->inlock, flags);
|
|
|
+ if (hid->open > 0 && !test_bit(HID_SUSPENDED, &usbhid->iofl) &&
|
|
|
+ !test_and_set_bit(HID_IN_RUNNING, &usbhid->iofl)) {
|
|
|
+ rc = usb_submit_urb(usbhid->urbin, GFP_ATOMIC);
|
|
|
+ if (rc != 0)
|
|
|
+ clear_bit(HID_IN_RUNNING, &usbhid->iofl);
|
|
|
}
|
|
|
-
|
|
|
- clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
|
|
|
- spin_unlock_irqrestore(&usbhid->outlock, flags);
|
|
|
- wake_up(&hid->wait);
|
|
|
+ spin_unlock_irqrestore(&usbhid->inlock, flags);
|
|
|
+ return rc;
|
|
|
}
|
|
|
|
|
|
-/*
|
|
|
- * Control pipe completion handler.
|
|
|
- */
|
|
|
-
|
|
|
-static void hid_ctrl(struct urb *urb)
|
|
|
+/* I/O retry timer routine */
|
|
|
+static void hid_retry_timeout(unsigned long _hid)
|
|
|
{
|
|
|
- struct hid_device *hid = urb->context;
|
|
|
+ struct hid_device *hid = (struct hid_device *) _hid;
|
|
|
struct usbhid_device *usbhid = hid->driver_data;
|
|
|
- unsigned long flags;
|
|
|
- int unplug = 0;
|
|
|
-
|
|
|
- spin_lock_irqsave(&usbhid->ctrllock, flags);
|
|
|
-
|
|
|
- switch (urb->status) {
|
|
|
- case 0: /* success */
|
|
|
- if (usbhid->ctrl[usbhid->ctrltail].dir == USB_DIR_IN)
|
|
|
- hid_input_report(urb->context, usbhid->ctrl[usbhid->ctrltail].report->type,
|
|
|
- urb->transfer_buffer, urb->actual_length, 0);
|
|
|
- break;
|
|
|
- case -ESHUTDOWN: /* unplug */
|
|
|
- unplug = 1;
|
|
|
- case -EILSEQ: /* protocol error or unplug */
|
|
|
- case -EPROTO: /* protocol error or unplug */
|
|
|
- case -ECONNRESET: /* unlink */
|
|
|
- case -ENOENT:
|
|
|
- case -EPIPE: /* report not available */
|
|
|
- break;
|
|
|
- default: /* error */
|
|
|
- warn("ctrl urb status %d received", urb->status);
|
|
|
- }
|
|
|
-
|
|
|
- if (unplug)
|
|
|
- usbhid->ctrltail = usbhid->ctrlhead;
|
|
|
- else
|
|
|
- usbhid->ctrltail = (usbhid->ctrltail + 1) & (HID_CONTROL_FIFO_SIZE - 1);
|
|
|
-
|
|
|
- if (usbhid->ctrlhead != usbhid->ctrltail) {
|
|
|
- if (hid_submit_ctrl(hid)) {
|
|
|
- clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
|
|
|
- wake_up(&hid->wait);
|
|
|
- }
|
|
|
- spin_unlock_irqrestore(&usbhid->ctrllock, flags);
|
|
|
- return;
|
|
|
- }
|
|
|
|
|
|
- clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
|
|
|
- spin_unlock_irqrestore(&usbhid->ctrllock, flags);
|
|
|
- wake_up(&hid->wait);
|
|
|
+ dev_dbg(&usbhid->intf->dev, "retrying intr urb\n");
|
|
|
+ if (hid_start_in(hid))
|
|
|
+ hid_io_error(hid);
|
|
|
}
|
|
|
|
|
|
-void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir)
|
|
|
+/* Workqueue routine to reset the device or clear a halt */
|
|
|
+static void hid_reset(struct work_struct *work)
|
|
|
{
|
|
|
- int head;
|
|
|
- unsigned long flags;
|
|
|
- struct usbhid_device *usbhid = hid->driver_data;
|
|
|
-
|
|
|
- if ((hid->quirks & HID_QUIRK_NOGET) && dir == USB_DIR_IN)
|
|
|
- return;
|
|
|
-
|
|
|
- if (usbhid->urbout && dir == USB_DIR_OUT && report->type == HID_OUTPUT_REPORT) {
|
|
|
+ struct usbhid_device *usbhid =
|
|
|
+ container_of(work, struct usbhid_device, reset_work);
|
|
|
+ struct hid_device *hid = usbhid->hid;
|
|
|
+ int rc_lock, rc = 0;
|
|
|
|
|
|
- spin_lock_irqsave(&usbhid->outlock, flags);
|
|
|
+ if (test_bit(HID_CLEAR_HALT, &usbhid->iofl)) {
|
|
|
+ dev_dbg(&usbhid->intf->dev, "clear halt\n");
|
|
|
+ rc = usb_clear_halt(hid_to_usb_dev(hid), usbhid->urbin->pipe);
|
|
|
+ clear_bit(HID_CLEAR_HALT, &usbhid->iofl);
|
|
|
+ hid_start_in(hid);
|
|
|
+ }
|
|
|
|
|
|
- if ((head = (usbhid->outhead + 1) & (HID_OUTPUT_FIFO_SIZE - 1)) == usbhid->outtail) {
|
|
|
- spin_unlock_irqrestore(&usbhid->outlock, flags);
|
|
|
- warn("output queue full");
|
|
|
- return;
|
|
|
+ else if (test_bit(HID_RESET_PENDING, &usbhid->iofl)) {
|
|
|
+ dev_dbg(&usbhid->intf->dev, "resetting device\n");
|
|
|
+ rc = rc_lock = usb_lock_device_for_reset(hid_to_usb_dev(hid), usbhid->intf);
|
|
|
+ if (rc_lock >= 0) {
|
|
|
+ rc = usb_reset_composite_device(hid_to_usb_dev(hid), usbhid->intf);
|
|
|
+ if (rc_lock)
|
|
|
+ usb_unlock_device(hid_to_usb_dev(hid));
|
|
|
}
|
|
|
-
|
|
|
- usbhid->out[usbhid->outhead] = report;
|
|
|
- usbhid->outhead = head;
|
|
|
-
|
|
|
- if (!test_and_set_bit(HID_OUT_RUNNING, &usbhid->iofl))
|
|
|
- if (hid_submit_out(hid))
|
|
|
- clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
|
|
|
-
|
|
|
- spin_unlock_irqrestore(&usbhid->outlock, flags);
|
|
|
- return;
|
|
|
+ clear_bit(HID_RESET_PENDING, &usbhid->iofl);
|
|
|
}
|
|
|
|
|
|
- spin_lock_irqsave(&usbhid->ctrllock, flags);
|
|
|
-
|
|
|
- if ((head = (usbhid->ctrlhead + 1) & (HID_CONTROL_FIFO_SIZE - 1)) == usbhid->ctrltail) {
|
|
|
- spin_unlock_irqrestore(&usbhid->ctrllock, flags);
|
|
|
- warn("control queue full");
|
|
|
- return;
|
|
|
+ switch (rc) {
|
|
|
+ case 0:
|
|
|
+ if (!test_bit(HID_IN_RUNNING, &usbhid->iofl))
|
|
|
+ hid_io_error(hid);
|
|
|
+ break;
|
|
|
+ default:
|
|
|
+ err("can't reset device, %s-%s/input%d, status %d",
|
|
|
+ hid_to_usb_dev(hid)->bus->bus_name,
|
|
|
+ hid_to_usb_dev(hid)->devpath,
|
|
|
+ usbhid->ifnum, rc);
|
|
|
+ /* FALLTHROUGH */
|
|
|
+ case -EHOSTUNREACH:
|
|
|
+ case -ENODEV:
|
|
|
+ case -EINTR:
|
|
|
+ break;
|
|
|
}
|
|
|
-
|
|
|
- usbhid->ctrl[usbhid->ctrlhead].report = report;
|
|
|
- usbhid->ctrl[usbhid->ctrlhead].dir = dir;
|
|
|
- usbhid->ctrlhead = head;
|
|
|
-
|
|
|
- if (!test_and_set_bit(HID_CTRL_RUNNING, &usbhid->iofl))
|
|
|
- if (hid_submit_ctrl(hid))
|
|
|
- clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
|
|
|
-
|
|
|
- spin_unlock_irqrestore(&usbhid->ctrllock, flags);
|
|
|
}
|
|
|
|
|
|
-static int usb_hidinput_input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
|
|
|
+/* Main I/O error handler */
|
|
|
+static void hid_io_error(struct hid_device *hid)
|
|
|
{
|
|
|
- struct hid_device *hid = dev->private;
|
|
|
- struct hid_field *field;
|
|
|
- int offset;
|
|
|
-
|
|
|
- if (type == EV_FF)
|
|
|
- return input_ff_event(dev, type, code, value);
|
|
|
-
|
|
|
- if (type != EV_LED)
|
|
|
- return -1;
|
|
|
+ unsigned long flags;
|
|
|
+ struct usbhid_device *usbhid = hid->driver_data;
|
|
|
|
|
|
- if ((offset = hidinput_find_field(hid, type, code, &field)) == -1) {
|
|
|
- warn("event field not found");
|
|
|
- return -1;
|
|
|
- }
|
|
|
+ spin_lock_irqsave(&usbhid->inlock, flags);
|
|
|
|
|
|
- hid_set_field(field, offset, value);
|
|
|
- usbhid_submit_report(hid, field->report, USB_DIR_OUT);
|
|
|
+ /* Stop when disconnected */
|
|
|
+ if (usb_get_intfdata(usbhid->intf) == NULL)
|
|
|
+ goto done;
|
|
|
|
|
|
- return 0;
|
|
|
-}
|
|
|
+ /* When an error occurs, retry at increasing intervals */
|
|
|
+ if (usbhid->retry_delay == 0) {
|
|
|
+ usbhid->retry_delay = 13; /* Then 26, 52, 104, 104, ... */
|
|
|
+ usbhid->stop_retry = jiffies + msecs_to_jiffies(1000);
|
|
|
+ } else if (usbhid->retry_delay < 100)
|
|
|
+ usbhid->retry_delay *= 2;
|
|
|
|
|
|
-int usbhid_wait_io(struct hid_device *hid)
|
|
|
-{
|
|
|
- struct usbhid_device *usbhid = hid->driver_data;
|
|
|
+ if (time_after(jiffies, usbhid->stop_retry)) {
|
|
|
|
|
|
- if (!wait_event_timeout(hid->wait, (!test_bit(HID_CTRL_RUNNING, &usbhid->iofl) &&
|
|
|
- !test_bit(HID_OUT_RUNNING, &usbhid->iofl)),
|
|
|
- 10*HZ)) {
|
|
|
- dbg("timeout waiting for ctrl or out queue to clear");
|
|
|
- return -1;
|
|
|
+ /* Retries failed, so do a port reset */
|
|
|
+ if (!test_and_set_bit(HID_RESET_PENDING, &usbhid->iofl)) {
|
|
|
+ schedule_work(&usbhid->reset_work);
|
|
|
+ goto done;
|
|
|
+ }
|
|
|
}
|
|
|
|
|
|
- return 0;
|
|
|
+ mod_timer(&usbhid->io_retry,
|
|
|
+ jiffies + msecs_to_jiffies(usbhid->retry_delay));
|
|
|
+done:
|
|
|
+ spin_unlock_irqrestore(&usbhid->inlock, flags);
|
|
|
}
|
|
|
|
|
|
-static int hid_set_idle(struct usb_device *dev, int ifnum, int report, int idle)
|
|
|
-{
|
|
|
- return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
|
|
|
- HID_REQ_SET_IDLE, USB_TYPE_CLASS | USB_RECIP_INTERFACE, (idle << 8) | report,
|
|
|
- ifnum, NULL, 0, USB_CTRL_SET_TIMEOUT);
|
|
|
-}
|
|
|
+/*
|
|
|
+ * Input interrupt completion handler.
|
|
|
+ */
|
|
|
|
|
|
-static int hid_get_class_descriptor(struct usb_device *dev, int ifnum,
|
|
|
- unsigned char type, void *buf, int size)
|
|
|
+static void hid_irq_in(struct urb *urb)
|
|
|
{
|
|
|
- int result, retries = 4;
|
|
|
-
|
|
|
- memset(buf, 0, size);
|
|
|
+ struct hid_device *hid = urb->context;
|
|
|
+ struct usbhid_device *usbhid = hid->driver_data;
|
|
|
+ int status;
|
|
|
|
|
|
- do {
|
|
|
- result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
|
|
|
- USB_REQ_GET_DESCRIPTOR, USB_RECIP_INTERFACE | USB_DIR_IN,
|
|
|
- (type << 8), ifnum, buf, size, USB_CTRL_GET_TIMEOUT);
|
|
|
- retries--;
|
|
|
- } while (result < size && retries);
|
|
|
- return result;
|
|
|
-}
|
|
|
+ switch (urb->status) {
|
|
|
+ case 0: /* success */
|
|
|
+ usbhid->retry_delay = 0;
|
|
|
+ hid_input_report(urb->context, HID_INPUT_REPORT,
|
|
|
+ urb->transfer_buffer,
|
|
|
+ urb->actual_length, 1);
|
|
|
+ break;
|
|
|
+ case -EPIPE: /* stall */
|
|
|
+ clear_bit(HID_IN_RUNNING, &usbhid->iofl);
|
|
|
+ set_bit(HID_CLEAR_HALT, &usbhid->iofl);
|
|
|
+ schedule_work(&usbhid->reset_work);
|
|
|
+ return;
|
|
|
+ case -ECONNRESET: /* unlink */
|
|
|
+ case -ENOENT:
|
|
|
+ case -ESHUTDOWN: /* unplug */
|
|
|
+ clear_bit(HID_IN_RUNNING, &usbhid->iofl);
|
|
|
+ return;
|
|
|
+ case -EILSEQ: /* protocol error or unplug */
|
|
|
+ case -EPROTO: /* protocol error or unplug */
|
|
|
+ case -ETIME: /* protocol error or unplug */
|
|
|
+ case -ETIMEDOUT: /* Should never happen, but... */
|
|
|
+ clear_bit(HID_IN_RUNNING, &usbhid->iofl);
|
|
|
+ hid_io_error(hid);
|
|
|
+ return;
|
|
|
+ default: /* error */
|
|
|
+ warn("input irq status %d received", urb->status);
|
|
|
+ }
|
|
|
|
|
|
-int usbhid_open(struct hid_device *hid)
|
|
|
-{
|
|
|
- ++hid->open;
|
|
|
- if (hid_start_in(hid))
|
|
|
- hid_io_error(hid);
|
|
|
- return 0;
|
|
|
+ status = usb_submit_urb(urb, GFP_ATOMIC);
|
|
|
+ if (status) {
|
|
|
+ clear_bit(HID_IN_RUNNING, &usbhid->iofl);
|
|
|
+ if (status != -EPERM) {
|
|
|
+ err("can't resubmit intr, %s-%s/input%d, status %d",
|
|
|
+ hid_to_usb_dev(hid)->bus->bus_name,
|
|
|
+ hid_to_usb_dev(hid)->devpath,
|
|
|
+ usbhid->ifnum, status);
|
|
|
+ hid_io_error(hid);
|
|
|
+ }
|
|
|
+ }
|
|
|
}
|
|
|
|
|
|
-void usbhid_close(struct hid_device *hid)
|
|
|
+static int hid_submit_out(struct hid_device *hid)
|
|
|
{
|
|
|
+ struct hid_report *report;
|
|
|
struct usbhid_device *usbhid = hid->driver_data;
|
|
|
|
|
|
- if (!--hid->open)
|
|
|
- usb_kill_urb(usbhid->urbin);
|
|
|
-}
|
|
|
+ report = usbhid->out[usbhid->outtail];
|
|
|
|
|
|
-#define USB_VENDOR_ID_PANJIT 0x134c
|
|
|
+ hid_output_report(report, usbhid->outbuf);
|
|
|
+ usbhid->urbout->transfer_buffer_length = ((report->size - 1) >> 3) + 1 + (report->id > 0);
|
|
|
+ usbhid->urbout->dev = hid_to_usb_dev(hid);
|
|
|
|
|
|
-#define USB_VENDOR_ID_TURBOX 0x062a
|
|
|
-#define USB_DEVICE_ID_TURBOX_KEYBOARD 0x0201
|
|
|
-#define USB_VENDOR_ID_CIDC 0x1677
|
|
|
+ dbg("submitting out urb");
|
|
|
|
|
|
-/*
|
|
|
- * Initialize all reports
|
|
|
- */
|
|
|
+ if (usb_submit_urb(usbhid->urbout, GFP_ATOMIC)) {
|
|
|
+ err("usb_submit_urb(out) failed");
|
|
|
+ return -1;
|
|
|
+ }
|
|
|
|
|
|
-void usbhid_init_reports(struct hid_device *hid)
|
|
|
+ return 0;
|
|
|
+}
|
|
|
+
|
|
|
+static int hid_submit_ctrl(struct hid_device *hid)
|
|
|
{
|
|
|
struct hid_report *report;
|
|
|
+ unsigned char dir;
|
|
|
+ int len;
|
|
|
struct usbhid_device *usbhid = hid->driver_data;
|
|
|
- int err, ret;
|
|
|
|
|
|
- list_for_each_entry(report, &hid->report_enum[HID_INPUT_REPORT].report_list, list)
|
|
|
- usbhid_submit_report(hid, report, USB_DIR_IN);
|
|
|
+ report = usbhid->ctrl[usbhid->ctrltail].report;
|
|
|
+ dir = usbhid->ctrl[usbhid->ctrltail].dir;
|
|
|
|
|
|
- list_for_each_entry(report, &hid->report_enum[HID_FEATURE_REPORT].report_list, list)
|
|
|
- usbhid_submit_report(hid, report, USB_DIR_IN);
|
|
|
+ len = ((report->size - 1) >> 3) + 1 + (report->id > 0);
|
|
|
+ if (dir == USB_DIR_OUT) {
|
|
|
+ hid_output_report(report, usbhid->ctrlbuf);
|
|
|
+ usbhid->urbctrl->pipe = usb_sndctrlpipe(hid_to_usb_dev(hid), 0);
|
|
|
+ usbhid->urbctrl->transfer_buffer_length = len;
|
|
|
+ } else {
|
|
|
+ int maxpacket, padlen;
|
|
|
|
|
|
- err = 0;
|
|
|
- ret = usbhid_wait_io(hid);
|
|
|
- while (ret) {
|
|
|
- err |= ret;
|
|
|
- if (test_bit(HID_CTRL_RUNNING, &usbhid->iofl))
|
|
|
- usb_kill_urb(usbhid->urbctrl);
|
|
|
- if (test_bit(HID_OUT_RUNNING, &usbhid->iofl))
|
|
|
- usb_kill_urb(usbhid->urbout);
|
|
|
- ret = usbhid_wait_io(hid);
|
|
|
+ usbhid->urbctrl->pipe = usb_rcvctrlpipe(hid_to_usb_dev(hid), 0);
|
|
|
+ maxpacket = usb_maxpacket(hid_to_usb_dev(hid), usbhid->urbctrl->pipe, 0);
|
|
|
+ if (maxpacket > 0) {
|
|
|
+ padlen = (len + maxpacket - 1) / maxpacket;
|
|
|
+ padlen *= maxpacket;
|
|
|
+ if (padlen > usbhid->bufsize)
|
|
|
+ padlen = usbhid->bufsize;
|
|
|
+ } else
|
|
|
+ padlen = 0;
|
|
|
+ usbhid->urbctrl->transfer_buffer_length = padlen;
|
|
|
}
|
|
|
+ usbhid->urbctrl->dev = hid_to_usb_dev(hid);
|
|
|
|
|
|
- if (err)
|
|
|
- warn("timeout initializing reports");
|
|
|
-}
|
|
|
-
|
|
|
-#define USB_VENDOR_ID_GTCO 0x078c
|
|
|
-#define USB_DEVICE_ID_GTCO_90 0x0090
|
|
|
-#define USB_DEVICE_ID_GTCO_100 0x0100
|
|
|
-#define USB_DEVICE_ID_GTCO_101 0x0101
|
|
|
-#define USB_DEVICE_ID_GTCO_103 0x0103
|
|
|
-#define USB_DEVICE_ID_GTCO_104 0x0104
|
|
|
-#define USB_DEVICE_ID_GTCO_105 0x0105
|
|
|
-#define USB_DEVICE_ID_GTCO_106 0x0106
|
|
|
-#define USB_DEVICE_ID_GTCO_107 0x0107
|
|
|
-#define USB_DEVICE_ID_GTCO_108 0x0108
|
|
|
-#define USB_DEVICE_ID_GTCO_200 0x0200
|
|
|
-#define USB_DEVICE_ID_GTCO_201 0x0201
|
|
|
-#define USB_DEVICE_ID_GTCO_202 0x0202
|
|
|
-#define USB_DEVICE_ID_GTCO_203 0x0203
|
|
|
-#define USB_DEVICE_ID_GTCO_204 0x0204
|
|
|
-#define USB_DEVICE_ID_GTCO_205 0x0205
|
|
|
-#define USB_DEVICE_ID_GTCO_206 0x0206
|
|
|
-#define USB_DEVICE_ID_GTCO_207 0x0207
|
|
|
-#define USB_DEVICE_ID_GTCO_300 0x0300
|
|
|
-#define USB_DEVICE_ID_GTCO_301 0x0301
|
|
|
-#define USB_DEVICE_ID_GTCO_302 0x0302
|
|
|
-#define USB_DEVICE_ID_GTCO_303 0x0303
|
|
|
-#define USB_DEVICE_ID_GTCO_304 0x0304
|
|
|
-#define USB_DEVICE_ID_GTCO_305 0x0305
|
|
|
-#define USB_DEVICE_ID_GTCO_306 0x0306
|
|
|
-#define USB_DEVICE_ID_GTCO_307 0x0307
|
|
|
-#define USB_DEVICE_ID_GTCO_308 0x0308
|
|
|
-#define USB_DEVICE_ID_GTCO_309 0x0309
|
|
|
-#define USB_DEVICE_ID_GTCO_400 0x0400
|
|
|
-#define USB_DEVICE_ID_GTCO_401 0x0401
|
|
|
-#define USB_DEVICE_ID_GTCO_402 0x0402
|
|
|
-#define USB_DEVICE_ID_GTCO_403 0x0403
|
|
|
-#define USB_DEVICE_ID_GTCO_404 0x0404
|
|
|
-#define USB_DEVICE_ID_GTCO_405 0x0405
|
|
|
-#define USB_DEVICE_ID_GTCO_500 0x0500
|
|
|
-#define USB_DEVICE_ID_GTCO_501 0x0501
|
|
|
-#define USB_DEVICE_ID_GTCO_502 0x0502
|
|
|
-#define USB_DEVICE_ID_GTCO_503 0x0503
|
|
|
-#define USB_DEVICE_ID_GTCO_504 0x0504
|
|
|
-#define USB_DEVICE_ID_GTCO_1000 0x1000
|
|
|
-#define USB_DEVICE_ID_GTCO_1001 0x1001
|
|
|
-#define USB_DEVICE_ID_GTCO_1002 0x1002
|
|
|
-#define USB_DEVICE_ID_GTCO_1003 0x1003
|
|
|
-#define USB_DEVICE_ID_GTCO_1004 0x1004
|
|
|
-#define USB_DEVICE_ID_GTCO_1005 0x1005
|
|
|
-#define USB_DEVICE_ID_GTCO_1006 0x1006
|
|
|
-
|
|
|
-#define USB_VENDOR_ID_WACOM 0x056a
|
|
|
-
|
|
|
-#define USB_VENDOR_ID_ACECAD 0x0460
|
|
|
-#define USB_DEVICE_ID_ACECAD_FLAIR 0x0004
|
|
|
-#define USB_DEVICE_ID_ACECAD_302 0x0008
|
|
|
-
|
|
|
-#define USB_VENDOR_ID_KBGEAR 0x084e
|
|
|
-#define USB_DEVICE_ID_KBGEAR_JAMSTUDIO 0x1001
|
|
|
+ usbhid->cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | dir;
|
|
|
+ usbhid->cr->bRequest = (dir == USB_DIR_OUT) ? HID_REQ_SET_REPORT : HID_REQ_GET_REPORT;
|
|
|
+ usbhid->cr->wValue = cpu_to_le16(((report->type + 1) << 8) | report->id);
|
|
|
+ usbhid->cr->wIndex = cpu_to_le16(usbhid->ifnum);
|
|
|
+ usbhid->cr->wLength = cpu_to_le16(len);
|
|
|
|
|
|
-#define USB_VENDOR_ID_AIPTEK 0x08ca
|
|
|
-#define USB_DEVICE_ID_AIPTEK_01 0x0001
|
|
|
-#define USB_DEVICE_ID_AIPTEK_10 0x0010
|
|
|
-#define USB_DEVICE_ID_AIPTEK_20 0x0020
|
|
|
-#define USB_DEVICE_ID_AIPTEK_21 0x0021
|
|
|
-#define USB_DEVICE_ID_AIPTEK_22 0x0022
|
|
|
-#define USB_DEVICE_ID_AIPTEK_23 0x0023
|
|
|
-#define USB_DEVICE_ID_AIPTEK_24 0x0024
|
|
|
+ dbg("submitting ctrl urb: %s wValue=0x%04x wIndex=0x%04x wLength=%u",
|
|
|
+ usbhid->cr->bRequest == HID_REQ_SET_REPORT ? "Set_Report" : "Get_Report",
|
|
|
+ usbhid->cr->wValue, usbhid->cr->wIndex, usbhid->cr->wLength);
|
|
|
|
|
|
-#define USB_VENDOR_ID_GRIFFIN 0x077d
|
|
|
-#define USB_DEVICE_ID_POWERMATE 0x0410
|
|
|
-#define USB_DEVICE_ID_SOUNDKNOB 0x04AA
|
|
|
+ if (usb_submit_urb(usbhid->urbctrl, GFP_ATOMIC)) {
|
|
|
+ err("usb_submit_urb(ctrl) failed");
|
|
|
+ return -1;
|
|
|
+ }
|
|
|
|
|
|
-#define USB_VENDOR_ID_ATEN 0x0557
|
|
|
-#define USB_DEVICE_ID_ATEN_UC100KM 0x2004
|
|
|
-#define USB_DEVICE_ID_ATEN_CS124U 0x2202
|
|
|
-#define USB_DEVICE_ID_ATEN_2PORTKVM 0x2204
|
|
|
-#define USB_DEVICE_ID_ATEN_4PORTKVM 0x2205
|
|
|
-#define USB_DEVICE_ID_ATEN_4PORTKVMC 0x2208
|
|
|
+ return 0;
|
|
|
+}
|
|
|
|
|
|
-#define USB_VENDOR_ID_TOPMAX 0x0663
|
|
|
-#define USB_DEVICE_ID_TOPMAX_COBRAPAD 0x0103
|
|
|
+/*
|
|
|
+ * Output interrupt completion handler.
|
|
|
+ */
|
|
|
|
|
|
-#define USB_VENDOR_ID_HAPP 0x078b
|
|
|
-#define USB_DEVICE_ID_UGCI_DRIVING 0x0010
|
|
|
-#define USB_DEVICE_ID_UGCI_FLYING 0x0020
|
|
|
-#define USB_DEVICE_ID_UGCI_FIGHTING 0x0030
|
|
|
+static void hid_irq_out(struct urb *urb)
|
|
|
+{
|
|
|
+ struct hid_device *hid = urb->context;
|
|
|
+ struct usbhid_device *usbhid = hid->driver_data;
|
|
|
+ unsigned long flags;
|
|
|
+ int unplug = 0;
|
|
|
|
|
|
-#define USB_VENDOR_ID_MGE 0x0463
|
|
|
-#define USB_DEVICE_ID_MGE_UPS 0xffff
|
|
|
-#define USB_DEVICE_ID_MGE_UPS1 0x0001
|
|
|
+ switch (urb->status) {
|
|
|
+ case 0: /* success */
|
|
|
+ break;
|
|
|
+ case -ESHUTDOWN: /* unplug */
|
|
|
+ unplug = 1;
|
|
|
+ case -EILSEQ: /* protocol error or unplug */
|
|
|
+ case -EPROTO: /* protocol error or unplug */
|
|
|
+ case -ECONNRESET: /* unlink */
|
|
|
+ case -ENOENT:
|
|
|
+ break;
|
|
|
+ default: /* error */
|
|
|
+ warn("output irq status %d received", urb->status);
|
|
|
+ }
|
|
|
|
|
|
-#define USB_VENDOR_ID_ONTRAK 0x0a07
|
|
|
-#define USB_DEVICE_ID_ONTRAK_ADU100 0x0064
|
|
|
+ spin_lock_irqsave(&usbhid->outlock, flags);
|
|
|
|
|
|
-#define USB_VENDOR_ID_ESSENTIAL_REALITY 0x0d7f
|
|
|
-#define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100
|
|
|
+ if (unplug)
|
|
|
+ usbhid->outtail = usbhid->outhead;
|
|
|
+ else
|
|
|
+ usbhid->outtail = (usbhid->outtail + 1) & (HID_OUTPUT_FIFO_SIZE - 1);
|
|
|
|
|
|
-#define USB_VENDOR_ID_A4TECH 0x09da
|
|
|
-#define USB_DEVICE_ID_A4TECH_WCP32PU 0x0006
|
|
|
+ if (usbhid->outhead != usbhid->outtail) {
|
|
|
+ if (hid_submit_out(hid)) {
|
|
|
+ clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
|
|
|
+ wake_up(&hid->wait);
|
|
|
+ }
|
|
|
+ spin_unlock_irqrestore(&usbhid->outlock, flags);
|
|
|
+ return;
|
|
|
+ }
|
|
|
|
|
|
-#define USB_VENDOR_ID_AASHIMA 0x06d6
|
|
|
-#define USB_DEVICE_ID_AASHIMA_GAMEPAD 0x0025
|
|
|
-#define USB_DEVICE_ID_AASHIMA_PREDATOR 0x0026
|
|
|
+ clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
|
|
|
+ spin_unlock_irqrestore(&usbhid->outlock, flags);
|
|
|
+ wake_up(&hid->wait);
|
|
|
+}
|
|
|
|
|
|
-#define USB_VENDOR_ID_CYPRESS 0x04b4
|
|
|
-#define USB_DEVICE_ID_CYPRESS_MOUSE 0x0001
|
|
|
-#define USB_DEVICE_ID_CYPRESS_HIDCOM 0x5500
|
|
|
-#define USB_DEVICE_ID_CYPRESS_ULTRAMOUSE 0x7417
|
|
|
+/*
|
|
|
+ * Control pipe completion handler.
|
|
|
+ */
|
|
|
|
|
|
-#define USB_VENDOR_ID_BERKSHIRE 0x0c98
|
|
|
-#define USB_DEVICE_ID_BERKSHIRE_PCWD 0x1140
|
|
|
+static void hid_ctrl(struct urb *urb)
|
|
|
+{
|
|
|
+ struct hid_device *hid = urb->context;
|
|
|
+ struct usbhid_device *usbhid = hid->driver_data;
|
|
|
+ unsigned long flags;
|
|
|
+ int unplug = 0;
|
|
|
|
|
|
-#define USB_VENDOR_ID_ALPS 0x0433
|
|
|
-#define USB_DEVICE_ID_IBM_GAMEPAD 0x1101
|
|
|
+ spin_lock_irqsave(&usbhid->ctrllock, flags);
|
|
|
|
|
|
-#define USB_VENDOR_ID_SAITEK 0x06a3
|
|
|
-#define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17
|
|
|
+ switch (urb->status) {
|
|
|
+ case 0: /* success */
|
|
|
+ if (usbhid->ctrl[usbhid->ctrltail].dir == USB_DIR_IN)
|
|
|
+ hid_input_report(urb->context, usbhid->ctrl[usbhid->ctrltail].report->type,
|
|
|
+ urb->transfer_buffer, urb->actual_length, 0);
|
|
|
+ break;
|
|
|
+ case -ESHUTDOWN: /* unplug */
|
|
|
+ unplug = 1;
|
|
|
+ case -EILSEQ: /* protocol error or unplug */
|
|
|
+ case -EPROTO: /* protocol error or unplug */
|
|
|
+ case -ECONNRESET: /* unlink */
|
|
|
+ case -ENOENT:
|
|
|
+ case -EPIPE: /* report not available */
|
|
|
+ break;
|
|
|
+ default: /* error */
|
|
|
+ warn("ctrl urb status %d received", urb->status);
|
|
|
+ }
|
|
|
|
|
|
-#define USB_VENDOR_ID_NEC 0x073e
|
|
|
-#define USB_DEVICE_ID_NEC_USB_GAME_PAD 0x0301
|
|
|
+ if (unplug)
|
|
|
+ usbhid->ctrltail = usbhid->ctrlhead;
|
|
|
+ else
|
|
|
+ usbhid->ctrltail = (usbhid->ctrltail + 1) & (HID_CONTROL_FIFO_SIZE - 1);
|
|
|
|
|
|
-#define USB_VENDOR_ID_CHIC 0x05fe
|
|
|
-#define USB_DEVICE_ID_CHIC_GAMEPAD 0x0014
|
|
|
+ if (usbhid->ctrlhead != usbhid->ctrltail) {
|
|
|
+ if (hid_submit_ctrl(hid)) {
|
|
|
+ clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
|
|
|
+ wake_up(&hid->wait);
|
|
|
+ }
|
|
|
+ spin_unlock_irqrestore(&usbhid->ctrllock, flags);
|
|
|
+ return;
|
|
|
+ }
|
|
|
|
|
|
-#define USB_VENDOR_ID_GLAB 0x06c2
|
|
|
-#define USB_DEVICE_ID_4_PHIDGETSERVO_30 0x0038
|
|
|
-#define USB_DEVICE_ID_1_PHIDGETSERVO_30 0x0039
|
|
|
-#define USB_DEVICE_ID_0_0_4_IF_KIT 0x0040
|
|
|
-#define USB_DEVICE_ID_0_16_16_IF_KIT 0x0044
|
|
|
-#define USB_DEVICE_ID_8_8_8_IF_KIT 0x0045
|
|
|
-#define USB_DEVICE_ID_0_8_7_IF_KIT 0x0051
|
|
|
-#define USB_DEVICE_ID_0_8_8_IF_KIT 0x0053
|
|
|
-#define USB_DEVICE_ID_PHIDGET_MOTORCONTROL 0x0058
|
|
|
+ clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
|
|
|
+ spin_unlock_irqrestore(&usbhid->ctrllock, flags);
|
|
|
+ wake_up(&hid->wait);
|
|
|
+}
|
|
|
|
|
|
-#define USB_VENDOR_ID_WISEGROUP 0x0925
|
|
|
-#define USB_DEVICE_ID_1_PHIDGETSERVO_20 0x8101
|
|
|
-#define USB_DEVICE_ID_4_PHIDGETSERVO_20 0x8104
|
|
|
-#define USB_DEVICE_ID_8_8_4_IF_KIT 0x8201
|
|
|
-#define USB_DEVICE_ID_DUAL_USB_JOYPAD 0x8866
|
|
|
+void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir)
|
|
|
+{
|
|
|
+ int head;
|
|
|
+ unsigned long flags;
|
|
|
+ struct usbhid_device *usbhid = hid->driver_data;
|
|
|
|
|
|
-#define USB_VENDOR_ID_WISEGROUP_LTD 0x6677
|
|
|
-#define USB_DEVICE_ID_SMARTJOY_DUAL_PLUS 0x8802
|
|
|
+ if ((hid->quirks & HID_QUIRK_NOGET) && dir == USB_DIR_IN)
|
|
|
+ return;
|
|
|
|
|
|
-#define USB_VENDOR_ID_CODEMERCS 0x07c0
|
|
|
-#define USB_DEVICE_ID_CODEMERCS_IOW_FIRST 0x1500
|
|
|
-#define USB_DEVICE_ID_CODEMERCS_IOW_LAST 0x15ff
|
|
|
+ if (usbhid->urbout && dir == USB_DIR_OUT && report->type == HID_OUTPUT_REPORT) {
|
|
|
|
|
|
-#define USB_VENDOR_ID_DELORME 0x1163
|
|
|
-#define USB_DEVICE_ID_DELORME_EARTHMATE 0x0100
|
|
|
-#define USB_DEVICE_ID_DELORME_EM_LT20 0x0200
|
|
|
+ spin_lock_irqsave(&usbhid->outlock, flags);
|
|
|
|
|
|
-#define USB_VENDOR_ID_MCC 0x09db
|
|
|
-#define USB_DEVICE_ID_MCC_PMD1024LS 0x0076
|
|
|
-#define USB_DEVICE_ID_MCC_PMD1208LS 0x007a
|
|
|
+ if ((head = (usbhid->outhead + 1) & (HID_OUTPUT_FIFO_SIZE - 1)) == usbhid->outtail) {
|
|
|
+ spin_unlock_irqrestore(&usbhid->outlock, flags);
|
|
|
+ warn("output queue full");
|
|
|
+ return;
|
|
|
+ }
|
|
|
|
|
|
-#define USB_VENDOR_ID_VERNIER 0x08f7
|
|
|
-#define USB_DEVICE_ID_VERNIER_LABPRO 0x0001
|
|
|
-#define USB_DEVICE_ID_VERNIER_GOTEMP 0x0002
|
|
|
-#define USB_DEVICE_ID_VERNIER_SKIP 0x0003
|
|
|
-#define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004
|
|
|
+ usbhid->out[usbhid->outhead] = report;
|
|
|
+ usbhid->outhead = head;
|
|
|
|
|
|
-#define USB_VENDOR_ID_LD 0x0f11
|
|
|
-#define USB_DEVICE_ID_LD_CASSY 0x1000
|
|
|
-#define USB_DEVICE_ID_LD_POCKETCASSY 0x1010
|
|
|
-#define USB_DEVICE_ID_LD_MOBILECASSY 0x1020
|
|
|
-#define USB_DEVICE_ID_LD_JWM 0x1080
|
|
|
-#define USB_DEVICE_ID_LD_DMMP 0x1081
|
|
|
-#define USB_DEVICE_ID_LD_UMIP 0x1090
|
|
|
-#define USB_DEVICE_ID_LD_XRAY1 0x1100
|
|
|
-#define USB_DEVICE_ID_LD_XRAY2 0x1101
|
|
|
-#define USB_DEVICE_ID_LD_VIDEOCOM 0x1200
|
|
|
-#define USB_DEVICE_ID_LD_COM3LAB 0x2000
|
|
|
-#define USB_DEVICE_ID_LD_TELEPORT 0x2010
|
|
|
-#define USB_DEVICE_ID_LD_NETWORKANALYSER 0x2020
|
|
|
-#define USB_DEVICE_ID_LD_POWERCONTROL 0x2030
|
|
|
-#define USB_DEVICE_ID_LD_MACHINETEST 0x2040
|
|
|
+ if (!test_and_set_bit(HID_OUT_RUNNING, &usbhid->iofl))
|
|
|
+ if (hid_submit_out(hid))
|
|
|
+ clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
|
|
|
|
|
|
-#define USB_VENDOR_ID_APPLE 0x05ac
|
|
|
-#define USB_DEVICE_ID_APPLE_MIGHTYMOUSE 0x0304
|
|
|
-#define USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI 0x020e
|
|
|
-#define USB_DEVICE_ID_APPLE_FOUNTAIN_ISO 0x020f
|
|
|
-#define USB_DEVICE_ID_APPLE_GEYSER_ANSI 0x0214
|
|
|
-#define USB_DEVICE_ID_APPLE_GEYSER_ISO 0x0215
|
|
|
-#define USB_DEVICE_ID_APPLE_GEYSER_JIS 0x0216
|
|
|
-#define USB_DEVICE_ID_APPLE_GEYSER3_ANSI 0x0217
|
|
|
-#define USB_DEVICE_ID_APPLE_GEYSER3_ISO 0x0218
|
|
|
-#define USB_DEVICE_ID_APPLE_GEYSER3_JIS 0x0219
|
|
|
-#define USB_DEVICE_ID_APPLE_GEYSER4_ANSI 0x021a
|
|
|
-#define USB_DEVICE_ID_APPLE_GEYSER4_ISO 0x021b
|
|
|
-#define USB_DEVICE_ID_APPLE_GEYSER4_JIS 0x021c
|
|
|
-#define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY 0x030a
|
|
|
-#define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY 0x030b
|
|
|
-#define USB_DEVICE_ID_APPLE_IR 0x8240
|
|
|
+ spin_unlock_irqrestore(&usbhid->outlock, flags);
|
|
|
+ return;
|
|
|
+ }
|
|
|
|
|
|
-#define USB_VENDOR_ID_CHERRY 0x046a
|
|
|
-#define USB_DEVICE_ID_CHERRY_CYMOTION 0x0023
|
|
|
+ spin_lock_irqsave(&usbhid->ctrllock, flags);
|
|
|
|
|
|
-#define USB_VENDOR_ID_YEALINK 0x6993
|
|
|
-#define USB_DEVICE_ID_YEALINK_P1K_P4K_B2K 0xb001
|
|
|
+ if ((head = (usbhid->ctrlhead + 1) & (HID_CONTROL_FIFO_SIZE - 1)) == usbhid->ctrltail) {
|
|
|
+ spin_unlock_irqrestore(&usbhid->ctrllock, flags);
|
|
|
+ warn("control queue full");
|
|
|
+ return;
|
|
|
+ }
|
|
|
|
|
|
-#define USB_VENDOR_ID_ALCOR 0x058f
|
|
|
-#define USB_DEVICE_ID_ALCOR_USBRS232 0x9720
|
|
|
+ usbhid->ctrl[usbhid->ctrlhead].report = report;
|
|
|
+ usbhid->ctrl[usbhid->ctrlhead].dir = dir;
|
|
|
+ usbhid->ctrlhead = head;
|
|
|
|
|
|
-#define USB_VENDOR_ID_SUN 0x0430
|
|
|
-#define USB_DEVICE_ID_RARITAN_KVM_DONGLE 0xcdab
|
|
|
+ if (!test_and_set_bit(HID_CTRL_RUNNING, &usbhid->iofl))
|
|
|
+ if (hid_submit_ctrl(hid))
|
|
|
+ clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
|
|
|
|
|
|
-#define USB_VENDOR_ID_AIRCABLE 0x16CA
|
|
|
-#define USB_DEVICE_ID_AIRCABLE1 0x1502
|
|
|
+ spin_unlock_irqrestore(&usbhid->ctrllock, flags);
|
|
|
+}
|
|
|
|
|
|
-#define USB_VENDOR_ID_LOGITECH 0x046d
|
|
|
-#define USB_DEVICE_ID_LOGITECH_USB_RECEIVER 0xc101
|
|
|
-#define USB_DEVICE_ID_LOGITECH_USB_RECEIVER_2 0xc517
|
|
|
-#define USB_DEVICE_ID_DINOVO_EDGE 0xc714
|
|
|
+static int usb_hidinput_input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
|
|
|
+{
|
|
|
+ struct hid_device *hid = dev->private;
|
|
|
+ struct hid_field *field;
|
|
|
+ int offset;
|
|
|
|
|
|
-#define USB_VENDOR_ID_IMATION 0x0718
|
|
|
-#define USB_DEVICE_ID_DISC_STAKKA 0xd000
|
|
|
+ if (type == EV_FF)
|
|
|
+ return input_ff_event(dev, type, code, value);
|
|
|
|
|
|
-#define USB_VENDOR_ID_PANTHERLORD 0x0810
|
|
|
-#define USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK 0x0001
|
|
|
+ if (type != EV_LED)
|
|
|
+ return -1;
|
|
|
|
|
|
-#define USB_VENDOR_ID_SONY 0x054c
|
|
|
-#define USB_DEVICE_ID_SONY_PS3_CONTROLLER 0x0268
|
|
|
+ if ((offset = hidinput_find_field(hid, type, code, &field)) == -1) {
|
|
|
+ warn("event field not found");
|
|
|
+ return -1;
|
|
|
+ }
|
|
|
|
|
|
-/*
|
|
|
- * Alphabetically sorted blacklist by quirk type.
|
|
|
- */
|
|
|
+ hid_set_field(field, offset, value);
|
|
|
+ usbhid_submit_report(hid, field->report, USB_DIR_OUT);
|
|
|
|
|
|
-static const struct hid_blacklist {
|
|
|
- __u16 idVendor;
|
|
|
- __u16 idProduct;
|
|
|
- unsigned quirks;
|
|
|
-} hid_blacklist[] = {
|
|
|
+ return 0;
|
|
|
+}
|
|
|
|
|
|
- { USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_EDGE, HID_QUIRK_DUPLICATE_USAGES },
|
|
|
+int usbhid_wait_io(struct hid_device *hid)
|
|
|
+{
|
|
|
+ struct usbhid_device *usbhid = hid->driver_data;
|
|
|
|
|
|
- { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_01, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_10, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_20, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_21, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_22, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_23, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_AIRCABLE, USB_DEVICE_ID_AIRCABLE1, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_HIDCOM, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_ULTRAMOUSE, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_4_PHIDGETSERVO_30, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_1_PHIDGETSERVO_30, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_0_4_IF_KIT, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_16_16_IF_KIT, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_8_8_8_IF_KIT, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_8_7_IF_KIT, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_8_8_IF_KIT, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_PHIDGET_MOTORCONTROL, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_90, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_100, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_101, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_103, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_104, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_105, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_106, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_107, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_108, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_200, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_201, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_202, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_203, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_204, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_205, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_206, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_207, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_300, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_301, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_302, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_303, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_304, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_305, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_306, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_307, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_308, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_309, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_400, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_401, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_402, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_403, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_404, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_405, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_500, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_501, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_502, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_503, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_504, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1000, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1001, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1002, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1003, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1004, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1005, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1006, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_IMATION, USB_DEVICE_ID_DISC_STAKKA, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOBILECASSY, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_JWM, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_DMMP, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_UMIP, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY1, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY2, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_VIDEOCOM, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_COM3LAB, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_TELEPORT, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1024LS, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1208LS, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS1, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 20, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 30, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 100, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 108, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 118, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 200, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 300, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 400, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 500, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_8_8_4_IF_KIT, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_YEALINK, USB_DEVICE_ID_YEALINK_P1K_P4K_B2K, HID_QUIRK_IGNORE },
|
|
|
+ if (!wait_event_timeout(hid->wait, (!test_bit(HID_CTRL_RUNNING, &usbhid->iofl) &&
|
|
|
+ !test_bit(HID_OUT_RUNNING, &usbhid->iofl)),
|
|
|
+ 10*HZ)) {
|
|
|
+ dbg("timeout waiting for ctrl or out queue to clear");
|
|
|
+ return -1;
|
|
|
+ }
|
|
|
|
|
|
- { USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_302, HID_QUIRK_IGNORE },
|
|
|
+ return 0;
|
|
|
+}
|
|
|
|
|
|
- { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET },
|
|
|
- { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS124U, HID_QUIRK_NOGET },
|
|
|
- { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET },
|
|
|
- { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
|
|
|
- { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
|
|
|
- { USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
|
|
|
- { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
|
|
|
- { USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SMARTJOY_DUAL_PLUS, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
|
|
|
+static int hid_set_idle(struct usb_device *dev, int ifnum, int report, int idle)
|
|
|
+{
|
|
|
+ return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
|
|
|
+ HID_REQ_SET_IDLE, USB_TYPE_CLASS | USB_RECIP_INTERFACE, (idle << 8) | report,
|
|
|
+ ifnum, NULL, 0, USB_CTRL_SET_TIMEOUT);
|
|
|
+}
|
|
|
|
|
|
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE, HID_QUIRK_MIGHTYMOUSE | HID_QUIRK_INVERT_HWHEEL },
|
|
|
- { USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU, HID_QUIRK_2WHEEL_MOUSE_HACK_7 },
|
|
|
- { USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE, HID_QUIRK_2WHEEL_MOUSE_HACK_5 },
|
|
|
+static int hid_get_class_descriptor(struct usb_device *dev, int ifnum,
|
|
|
+ unsigned char type, void *buf, int size)
|
|
|
+{
|
|
|
+ int result, retries = 4;
|
|
|
|
|
|
- { USB_VENDOR_ID_AASHIMA, USB_DEVICE_ID_AASHIMA_GAMEPAD, HID_QUIRK_BADPAD },
|
|
|
- { USB_VENDOR_ID_AASHIMA, USB_DEVICE_ID_AASHIMA_PREDATOR, HID_QUIRK_BADPAD },
|
|
|
- { USB_VENDOR_ID_ALPS, USB_DEVICE_ID_IBM_GAMEPAD, HID_QUIRK_BADPAD },
|
|
|
- { USB_VENDOR_ID_CHIC, USB_DEVICE_ID_CHIC_GAMEPAD, HID_QUIRK_BADPAD },
|
|
|
- { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
|
|
|
- { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
|
|
|
- { USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
|
|
|
- { USB_VENDOR_ID_NEC, USB_DEVICE_ID_NEC_USB_GAME_PAD, HID_QUIRK_BADPAD },
|
|
|
- { USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RUMBLEPAD, HID_QUIRK_BADPAD },
|
|
|
- { USB_VENDOR_ID_TOPMAX, USB_DEVICE_ID_TOPMAX_COBRAPAD, HID_QUIRK_BADPAD },
|
|
|
+ memset(buf, 0, size);
|
|
|
|
|
|
- { USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION, HID_QUIRK_CYMOTION },
|
|
|
+ do {
|
|
|
+ result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
|
|
|
+ USB_REQ_GET_DESCRIPTOR, USB_RECIP_INTERFACE | USB_DIR_IN,
|
|
|
+ (type << 8), ifnum, buf, size, USB_CTRL_GET_TIMEOUT);
|
|
|
+ retries--;
|
|
|
+ } while (result < size && retries);
|
|
|
+ return result;
|
|
|
+}
|
|
|
|
|
|
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
|
|
|
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
|
|
|
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
|
|
|
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
|
|
|
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_JIS, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
|
|
|
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ANSI, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
|
|
|
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
|
|
|
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
|
|
|
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
|
|
|
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
|
|
|
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
|
|
|
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
|
|
|
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
|
|
|
+int usbhid_open(struct hid_device *hid)
|
|
|
+{
|
|
|
+ ++hid->open;
|
|
|
+ if (hid_start_in(hid))
|
|
|
+ hid_io_error(hid);
|
|
|
+ return 0;
|
|
|
+}
|
|
|
|
|
|
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IR, HID_QUIRK_IGNORE },
|
|
|
+void usbhid_close(struct hid_device *hid)
|
|
|
+{
|
|
|
+ struct usbhid_device *usbhid = hid->driver_data;
|
|
|
|
|
|
- { USB_VENDOR_ID_PANJIT, 0x0001, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_PANJIT, 0x0002, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_PANJIT, 0x0003, HID_QUIRK_IGNORE },
|
|
|
- { USB_VENDOR_ID_PANJIT, 0x0004, HID_QUIRK_IGNORE },
|
|
|
+ if (!--hid->open)
|
|
|
+ usb_kill_urb(usbhid->urbin);
|
|
|
+}
|
|
|
|
|
|
- { USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD, HID_QUIRK_NOGET },
|
|
|
+/*
|
|
|
+ * Initialize all reports
|
|
|
+ */
|
|
|
|
|
|
- { USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_USB_RECEIVER, HID_QUIRK_BAD_RELATIVE_KEYS },
|
|
|
- { USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_USB_RECEIVER_2, HID_QUIRK_LOGITECH_S510_DESCRIPTOR },
|
|
|
+void usbhid_init_reports(struct hid_device *hid)
|
|
|
+{
|
|
|
+ struct hid_report *report;
|
|
|
+ struct usbhid_device *usbhid = hid->driver_data;
|
|
|
+ int err, ret;
|
|
|
|
|
|
- { USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS },
|
|
|
+ list_for_each_entry(report, &hid->report_enum[HID_INPUT_REPORT].report_list, list)
|
|
|
+ usbhid_submit_report(hid, report, USB_DIR_IN);
|
|
|
|
|
|
- { USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER, HID_QUIRK_SONY_PS3_CONTROLLER },
|
|
|
+ list_for_each_entry(report, &hid->report_enum[HID_FEATURE_REPORT].report_list, list)
|
|
|
+ usbhid_submit_report(hid, report, USB_DIR_IN);
|
|
|
|
|
|
- { USB_VENDOR_ID_CIDC, 0x0103, HID_QUIRK_IGNORE },
|
|
|
+ err = 0;
|
|
|
+ ret = usbhid_wait_io(hid);
|
|
|
+ while (ret) {
|
|
|
+ err |= ret;
|
|
|
+ if (test_bit(HID_CTRL_RUNNING, &usbhid->iofl))
|
|
|
+ usb_kill_urb(usbhid->urbctrl);
|
|
|
+ if (test_bit(HID_OUT_RUNNING, &usbhid->iofl))
|
|
|
+ usb_kill_urb(usbhid->urbout);
|
|
|
+ ret = usbhid_wait_io(hid);
|
|
|
+ }
|
|
|
|
|
|
- { 0, 0 }
|
|
|
-};
|
|
|
+ if (err)
|
|
|
+ warn("timeout initializing reports");
|
|
|
+}
|
|
|
|
|
|
/*
|
|
|
* Traverse the supplied list of reports and find the longest
|