Merge branch 'bnx2x'

Yuval Mintz says:

====================
bnx2x: Bug fixes patch series

This series contains several fixes, relating either to SR-IOV flows
or to critical sections protected by the rtnl lock.

Please consider applying these patches to `net'.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnx2x/bnx2x.h

@@ -1376,7 +1376,6 @@ enum {
 	BNX2X_SP_RTNL_RX_MODE,
 	BNX2X_SP_RTNL_HYPERVISOR_VLAN,
 	BNX2X_SP_RTNL_TX_STOP,
-	BNX2X_SP_RTNL_TX_RESUME,
 };
 
 struct bnx2x_prev_path_list {

drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c

@@ -2959,6 +2959,10 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode, bool keep_link)
 
 	bp->port.pmf = 0;
 
+	/* clear pending work in rtnl task */
+	bp->sp_rtnl_state = 0;
+	smp_mb();
+
 	/* Free SKBs, SGEs, TPA pool and driver internals */
 	bnx2x_free_skbs(bp);
 	if (CNIC_LOADED(bp))

drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c

@@ -778,11 +778,6 @@ void bnx2x_dcbx_set_params(struct bnx2x *bp, u32 state)
 
 		/* ets may affect cmng configuration: reinit it in hw */
 		bnx2x_set_local_cmng(bp);
-
-		set_bit(BNX2X_SP_RTNL_TX_RESUME, &bp->sp_rtnl_state);
-
-		schedule_delayed_work(&bp->sp_rtnl_task, 0);
-
 		return;
 	case BNX2X_DCBX_STATE_TX_RELEASED:
 		DP(BNX2X_MSG_DCB, "BNX2X_DCBX_STATE_TX_RELEASED\n");

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

@@ -577,7 +577,9 @@ void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
 	rc = bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp));
 	if (rc) {
 		BNX2X_ERR("DMAE returned failure %d\n", rc);
+#ifdef BNX2X_STOP_ON_ERROR
 		bnx2x_panic();
+#endif
 	}
 }
 
@@ -614,7 +616,9 @@ void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32)
 	rc = bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp));
 	if (rc) {
 		BNX2X_ERR("DMAE returned failure %d\n", rc);
+#ifdef BNX2X_STOP_ON_ERROR
 		bnx2x_panic();
+#endif
 	}
 }
 
@@ -5231,18 +5235,18 @@ static void bnx2x_eq_int(struct bnx2x *bp)
 
 		case EVENT_RING_OPCODE_STOP_TRAFFIC:
 			DP(BNX2X_MSG_SP | BNX2X_MSG_DCB, "got STOP TRAFFIC\n");
+			bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_PAUSED);
 			if (f_obj->complete_cmd(bp, f_obj,
 						BNX2X_F_CMD_TX_STOP))
 				break;
-			bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_PAUSED);
 			goto next_spqe;
 
 		case EVENT_RING_OPCODE_START_TRAFFIC:
 			DP(BNX2X_MSG_SP | BNX2X_MSG_DCB, "got START TRAFFIC\n");
+			bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_RELEASED);
 			if (f_obj->complete_cmd(bp, f_obj,
 						BNX2X_F_CMD_TX_START))
 				break;
-			bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_RELEASED);
 			goto next_spqe;
 
 		case EVENT_RING_OPCODE_FUNCTION_UPDATE:
@@ -9352,6 +9356,10 @@ static int bnx2x_process_kill(struct bnx2x *bp, bool global)
 	bnx2x_process_kill_chip_reset(bp, global);
 	barrier();
 
+	/* clear errors in PGB */
+	if (!CHIP_IS_E1x(bp))
+		REG_WR(bp, PGLUE_B_REG_LATCHED_ERRORS_CLR, 0x7f);
+
 	/* Recover after reset: */
 	/* MCP */
 	if (global && bnx2x_reset_mcp_comp(bp, val))
@@ -9706,11 +9714,10 @@ sp_rtnl_not_reset:
 			       &bp->sp_rtnl_state))
 		bnx2x_pf_set_vfs_vlan(bp);
 
-	if (test_and_clear_bit(BNX2X_SP_RTNL_TX_STOP, &bp->sp_rtnl_state))
+	if (test_and_clear_bit(BNX2X_SP_RTNL_TX_STOP, &bp->sp_rtnl_state)) {
 		bnx2x_dcbx_stop_hw_tx(bp);
-
-	if (test_and_clear_bit(BNX2X_SP_RTNL_TX_RESUME, &bp->sp_rtnl_state))
 		bnx2x_dcbx_resume_hw_tx(bp);
+	}
 
 	/* work which needs rtnl lock not-taken (as it takes the lock itself and
 	 * can be called from other contexts as well)

drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h

@@ -2864,6 +2864,17 @@
 #define PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ		 0x9430
 #define PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_WRITE		 0x9434
 #define PGLUE_B_REG_INTERNAL_VFID_ENABLE			 0x9438
+/* [W 7] Writing 1 to each bit in this register clears a corresponding error
+ * details register and enables logging new error details. Bit 0 - clears
+ * INCORRECT_RCV_DETAILS; Bit 1 - clears RX_ERR_DETAILS; Bit 2 - clears
+ * TX_ERR_WR_ADD_31_0 TX_ERR_WR_ADD_63_32 TX_ERR_WR_DETAILS
+ * TX_ERR_WR_DETAILS2 TX_ERR_RD_ADD_31_0 TX_ERR_RD_ADD_63_32
+ * TX_ERR_RD_DETAILS TX_ERR_RD_DETAILS2 TX_ERR_WR_DETAILS_ICPL; Bit 3 -
+ * clears VF_LENGTH_VIOLATION_DETAILS. Bit 4 - clears
+ * VF_GRC_SPACE_VIOLATION_DETAILS. Bit 5 - clears RX_TCPL_ERR_DETAILS. Bit 6
+ * - clears TCPL_IN_TWO_RCBS_DETAILS. */
+#define PGLUE_B_REG_LATCHED_ERRORS_CLR				 0x943c
+
 /* [R 9] Interrupt register #0 read */
 #define PGLUE_B_REG_PGLUE_B_INT_STS				 0x9298
 /* [RC 9] Interrupt register #0 read clear */

drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c

@@ -152,7 +152,7 @@ static int bnx2x_send_msg2pf(struct bnx2x *bp, u8 *done, dma_addr_t msg_mapping)
 	if (bp->old_bulletin.valid_bitmap & 1 << CHANNEL_DOWN) {
 		DP(BNX2X_MSG_IOV, "detecting channel down. Aborting message\n");
 		*done = PFVF_STATUS_SUCCESS;
-		return 0;
+		return -EINVAL;
 	}
 
 	/* Write message address */