staging: rtl8192e: Remove RTL8192P and RTL8192U ifdefs

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/rtl8192e/r8190_rtl8256.c

@@ -59,13 +59,6 @@ void PHY_SetRF8256Bandwidth(struct net_device* dev , HT_CHANNEL_WIDTH Bandwidth)
 					rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3ff);
 					rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x0e1);
 
-					//cosa add for sd3's request 01/23/2008
-					#if 0
-					if(priv->chan == 3 || priv->chan == 9) //I need to set priv->chan whenever current channel changes
-						rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x59b);
-					else
-						rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x5ab);
-					#endif
 				}
 				else
 				{
@@ -241,41 +234,6 @@ void PHY_SetRF8256CCKTxPower(struct net_device*	dev, u8	powerlevel)
 {
 	u32	TxAGC=0;
 	struct r8192_priv *priv = ieee80211_priv(dev);
-#ifdef RTL8190P
-	u8				byte0, byte1;
-
-	TxAGC |= ((powerlevel<<8)|powerlevel);
-	TxAGC += priv->CCKTxPowerLevelOriginalOffset;
-
-	if(priv->bDynamicTxLowPower == true  //cosa 04282008 for cck long range
-		/*pMgntInfo->bScanInProgress == TRUE*/ ) //cosa 05/22/2008 for scan
-	{
-		if(priv->CustomerID == RT_CID_819x_Netcore)
-			TxAGC = 0x2222;
-		else
-		TxAGC += ((priv->CckPwEnl<<8)|priv->CckPwEnl);
-	}
-
-	byte0 = (u8)(TxAGC & 0xff);
-	byte1 = (u8)((TxAGC & 0xff00)>>8);
-	if(byte0 > 0x24)
-		byte0 = 0x24;
-	if(byte1 > 0x24)
-		byte1 = 0x24;
-	if(priv->rf_type == RF_2T4R)	//Only 2T4R you have to care the Antenna Tx Power offset
-	{	// check antenna C over the max index 0x24
-			if(priv->RF_C_TxPwDiff > 0)
-			{
-				if( (byte0 + (u8)priv->RF_C_TxPwDiff) > 0x24)
-					byte0 = 0x24 - priv->RF_C_TxPwDiff;
-				if( (byte1 + (u8)priv->RF_C_TxPwDiff) > 0x24)
-					byte1 = 0x24 - priv->RF_C_TxPwDiff;
-			}
-		}
-	TxAGC = (byte1<<8) |byte0;
-	write_nic_dword(priv, CCK_TXAGC, TxAGC);
-#else
-	#ifdef RTL8192E
 
 	TxAGC = powerlevel;
 	if(priv->bDynamicTxLowPower == true)//cosa 04282008 for cck long range
@@ -288,86 +246,13 @@ void PHY_SetRF8256CCKTxPower(struct net_device*	dev, u8	powerlevel)
 	if(TxAGC > 0x24)
 		TxAGC = 0x24;
 	rtl8192_setBBreg(dev, rTxAGC_CCK_Mcs32, bTxAGCRateCCK, TxAGC);
-	#endif
-#endif
 }
 
 
 void PHY_SetRF8256OFDMTxPower(struct net_device* dev, u8 powerlevel)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
-	//Joseph TxPower for 8192 testing
-#ifdef RTL8190P
-	u32				TxAGC1=0, TxAGC2=0, TxAGC2_tmp = 0;
-	u8				i, byteVal1[4], byteVal2[4], byteVal3[4];
-
-	if(priv->bDynamicTxHighPower == true)     //Add by Jacken 2008/03/06
-	{
-		TxAGC1 |= ((powerlevel<<24)|(powerlevel<<16)|(powerlevel<<8)|powerlevel);
-		//for tx power track
-		TxAGC2_tmp = TxAGC1;
-
-		TxAGC1 += priv->MCSTxPowerLevelOriginalOffset[0];
-		TxAGC2 =0x03030303;
-
-		//for tx power track
-		TxAGC2_tmp += priv->MCSTxPowerLevelOriginalOffset[1];
-	}
-	else
-	{
-		TxAGC1 |= ((powerlevel<<24)|(powerlevel<<16)|(powerlevel<<8)|powerlevel);
-		TxAGC2 = TxAGC1;
-
-		TxAGC1 += priv->MCSTxPowerLevelOriginalOffset[0];
-		TxAGC2 += priv->MCSTxPowerLevelOriginalOffset[1];
-
-		TxAGC2_tmp = TxAGC2;
-
-	}
-	for(i=0; i<4; i++)
-	{
-		byteVal1[i] = (u8)(  (TxAGC1 & (0xff<<(i*8))) >>(i*8) );
-		if(byteVal1[i] > 0x24)
-			byteVal1[i] = 0x24;
-		byteVal2[i] = (u8)(  (TxAGC2 & (0xff<<(i*8))) >>(i*8) );
-		if(byteVal2[i] > 0x24)
-			byteVal2[i] = 0x24;
-
-		//for tx power track
-		byteVal3[i] = (u8)(  (TxAGC2_tmp & (0xff<<(i*8))) >>(i*8) );
-		if(byteVal3[i] > 0x24)
-			byteVal3[i] = 0x24;
-	}
-
-	if(priv->rf_type == RF_2T4R)	//Only 2T4R you have to care the Antenna Tx Power offset
-	{	// check antenna C over the max index 0x24
-		if(priv->RF_C_TxPwDiff > 0)
-		{
-			for(i=0; i<4; i++)
-			{
-				if( (byteVal1[i] + (u8)priv->RF_C_TxPwDiff) > 0x24)
-					byteVal1[i] = 0x24 - priv->RF_C_TxPwDiff;
-				if( (byteVal2[i] + (u8)priv->RF_C_TxPwDiff) > 0x24)
-					byteVal2[i] = 0x24 - priv->RF_C_TxPwDiff;
-				if( (byteVal3[i] + (u8)priv->RF_C_TxPwDiff) > 0x24)
-					byteVal3[i] = 0x24 - priv->RF_C_TxPwDiff;
-			}
-		}
-	}
-
-	TxAGC1 = (byteVal1[3]<<24) | (byteVal1[2]<<16) |(byteVal1[1]<<8) |byteVal1[0];
-	TxAGC2 = (byteVal2[3]<<24) | (byteVal2[2]<<16) |(byteVal2[1]<<8) |byteVal2[0];
 
-	//for tx power track
-	TxAGC2_tmp = (byteVal3[3]<<24) | (byteVal3[2]<<16) |(byteVal3[1]<<8) |byteVal3[0];
-	priv->Pwr_Track = TxAGC2_tmp;
-	//DbgPrint("TxAGC2_tmp = 0x%x\n", TxAGC2_tmp);
-
-	//DbgPrint("TxAGC1/TxAGC2 = 0x%x/0x%x\n", TxAGC1, TxAGC2);
-	write_nic_dword(priv, MCS_TXAGC, TxAGC1);
-	write_nic_dword(priv, MCS_TXAGC+4, TxAGC2);
-#else
-#ifdef RTL8192E
 	u32 writeVal, powerBase0, powerBase1, writeVal_tmp;
 	u8 index = 0;
 	u16 RegOffset[6] = {0xe00, 0xe04, 0xe10, 0xe14, 0xe18, 0xe1c};
@@ -410,9 +295,6 @@ void PHY_SetRF8256OFDMTxPower(struct net_device* dev, u8 powerlevel)
 		}
 		rtl8192_setBBreg(dev, RegOffset[index], 0x7f7f7f7f, writeVal);
 	}
-
-#endif
-#endif
 }
 
 #define MAX_DOZE_WAITING_TIMES_9x 64
@@ -443,56 +325,7 @@ SetRFPowerState8190(
 						//RXTX enable control: On
 					//for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
 					//	PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x2);
-#ifdef RTL8190P
-				if(priv->rf_type == RF_2T4R)
-				{
-					//enable RF-Chip A/B
-					rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x1); // 0x860[4]
-					//enable RF-Chip C/D
-					rtl8192_setBBreg(dev, rFPGA0_XC_RFInterfaceOE, BIT4, 0x1); // 0x868[4]
-					//analog to digital on
-					rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0xf);// 0x88c[11:8]
-					//digital to analog on
-					rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x1e0, 0xf); // 0x880[8:5]
-					//rx antenna on
-					rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0xf);// 0xc04[3:0]
-					//rx antenna on
-					rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0xf);// 0xd04[3:0]
-					//analog to digital part2 on
-					rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x1e00, 0xf); // 0x880[12:9]
-				}
-				else if(priv->rf_type == RF_1T2R)	//RF-C, RF-D
-				{
-					//enable RF-Chip C/D
-					rtl8192_setBBreg(dev, rFPGA0_XC_RFInterfaceOE, BIT4, 0x1); // 0x868[4]
-					//analog to digital on
-					rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xc00, 0x3);// 0x88c[11:10]
-					//digital to analog on
-					rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x180, 0x3); // 0x880[8:7]
-					//rx antenna on
-					rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xc, 0x3);// 0xc04[3:2]
-					//rx antenna on
-					rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xc, 0x3);// 0xd04[3:2]
-					//analog to digital part2 on
-					rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x1800, 0x3); // 0x880[12:11]
-				}
-				else if(priv->rf_type == RF_1T1R)	//RF-C
-				{
-					//enable RF-Chip C/D
-					rtl8192_setBBreg(dev, rFPGA0_XC_RFInterfaceOE, BIT4, 0x1); // 0x868[4]
-					//analog to digital on
-					rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x400, 0x1);// 0x88c[10]
-					//digital to analog on
-					rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x80, 0x1); // 0x880[7]
-					//rx antenna on
-					rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x4, 0x1);// 0xc04[2]
-					//rx antenna on
-					rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x4, 0x1);// 0xd04[2]
-					//analog to digital part2 on
-					rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x800, 0x1); // 0x880[11]
-				}
 
-#elif defined RTL8192E
 				// turn on RF
 				if((priv->ieee80211->eRFPowerState == eRfOff) && RT_IN_PS_LEVEL(pPSC, RT_RF_OFF_LEVL_HALT_NIC))
 				{ // The current RF state is OFF and the RF OFF level is halting the NIC, re-initialize the NIC.
@@ -561,7 +394,6 @@ SetRFPowerState8190(
 
 				}
 
-				#endif
 						break;
 
 				//
@@ -603,17 +435,7 @@ SetRFPowerState8190(
 						}
 				}
 
-				//if(Adapter->HardwareType == HARDWARE_TYPE_RTL8190P)
-#ifdef RTL8190P
-				{
-					PHY_SetRtl8190pRfOff(dev);
-				}
-				//else if(Adapter->HardwareType == HARDWARE_TYPE_RTL8192E)
-#elif defined RTL8192E
-				{
-					PHY_SetRtl8192eRfOff(dev);
-				}
-#endif
+				PHY_SetRtl8192eRfOff(dev);
 			}
 								break;
 
@@ -649,13 +471,6 @@ SetRFPowerState8190(
 						}
 					}
 
-				//if(Adapter->HardwareType == HARDWARE_TYPE_RTL8190P)
-#if defined RTL8190P
-				{
-					PHY_SetRtl8190pRfOff(dev);
-				}
-				//else if(Adapter->HardwareType == HARDWARE_TYPE_RTL8192E)
-#elif defined RTL8192E
 				{
 					//if(pPSC->RegRfPsLevel & RT_RF_OFF_LEVL_HALT_NIC && !RT_IN_PS_LEVEL(pPSC, RT_RF_OFF_LEVL_HALT_NIC) && priv->ieee80211->RfOffReason > RF_CHANGE_BY_PS)
 					if (pPSC->RegRfPsLevel & RT_RF_OFF_LEVL_HALT_NIC && !RT_IN_PS_LEVEL(pPSC, RT_RF_OFF_LEVL_HALT_NIC))
@@ -687,14 +502,7 @@ SetRFPowerState8190(
 						PHY_SetRtl8192eRfOff(dev);
 					}
 				}
-#else
-				else
-				{
-					RT_TRACE(COMP_DBG,DBG_TRACE,("It is not 8190Pci and 8192PciE \n"));
-				}
-				#endif
-
-					break;
+				break;
 
 			default:
 					bResult = false;
@@ -742,11 +550,7 @@ SetRFPowerState(
 	bool bResult = false;
 
 	RT_TRACE(COMP_RF,"---------> SetRFPowerState(): eRFPowerState(%d)\n", eRFPowerState);
-#ifdef RTL8192E
 	if(eRFPowerState == priv->ieee80211->eRFPowerState && priv->bHwRfOffAction == 0)
-#else
-	if(eRFPowerState == priv->ieee80211->eRFPowerState)
-#endif
 	{
 		RT_TRACE(COMP_POWER, "<--------- SetRFPowerState(): discard the request for eRFPowerState(%d) is the same.\n", eRFPowerState);
 		return bResult;

drivers/staging/rtl8192e/r8190_rtl8256.h

@@ -10,11 +10,7 @@
 #ifndef RTL8225_H
 #define RTL8225_H
 
-#ifdef RTL8190P
-#define RTL819X_TOTAL_RF_PATH 4
-#else
 #define RTL819X_TOTAL_RF_PATH 2 /* for 8192E */
-#endif
 
 void PHY_SetRF8256Bandwidth(struct net_device *dev,
 				   HT_CHANNEL_WIDTH Bandwidth);

drivers/staging/rtl8192e/r8192E_core.c

@@ -1,6 +1,6 @@
 /******************************************************************************
  * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
- * Linux device driver for RTL8190P / RTL8192E
+ * Linux device driver for RTL8192E
  *
  * Based on the r8180 driver, which is:
  * Copyright 2004-2005 Andrea Merello <andreamrl@tiscali.it>, et al.
@@ -90,21 +90,12 @@ u32 rt_global_debug_component =
 				COMP_ERR ; //always open err flags on
 
 static DEFINE_PCI_DEVICE_TABLE(rtl8192_pci_id_tbl) = {
-#ifdef RTL8190P
-	/* Realtek */
-	/* Dlink */
-	{ PCI_DEVICE(0x10ec, 0x8190) },
-	/* Corega */
-	{ PCI_DEVICE(0x07aa, 0x0045) },
-	{ PCI_DEVICE(0x07aa, 0x0046) },
-#else
 	/* Realtek */
 	{ PCI_DEVICE(0x10ec, 0x8192) },
 
 	/* Corega */
 	{ PCI_DEVICE(0x07aa, 0x0044) },
 	{ PCI_DEVICE(0x07aa, 0x0047) },
-#endif
 	{}
 };
 
@@ -887,9 +878,7 @@ void rtl8192_halt_adapter(struct net_device *dev, bool reset)
 	if (!reset) {
 		mdelay(150);
 
-#ifdef RTL8192E
 		priv->bHwRfOffAction = 2;
-#endif
 
 		/*
 		 * Call MgntActSet_RF_State instead to
@@ -1396,12 +1385,8 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff* skb)
 	if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40) {
 		if (tcb_desc->bPacketBW) {
 			pTxFwInfo->TxBandwidth = 1;
-#ifdef RTL8190P
-			pTxFwInfo->TxSubCarrier = 3;
-#else
 			/* use duplicated mode */
 			pTxFwInfo->TxSubCarrier = 0;
-#endif
 		} else {
 			pTxFwInfo->TxBandwidth = 0;
 			pTxFwInfo->TxSubCarrier = priv->nCur40MhzPrimeSC;
@@ -2285,15 +2270,9 @@ static void rtl8192_read_eeprom_info(struct r8192_priv *priv)
 {
 	struct net_device *dev = priv->ieee80211->dev;
 	u8			tempval;
-#ifdef RTL8192E
 	u8			ICVer8192, ICVer8256;
-#endif
 	u16			i,usValue, IC_Version;
 	u16			EEPROMId;
-#ifdef RTL8190P
-   	u8			offset;
-    	u8      		EepromTxPower[100];
-#endif
 	u8 bMac_Tmp_Addr[6] = {0x00, 0xe0, 0x4c, 0x00, 0x00, 0x01};
 	RT_TRACE(COMP_INIT, "====> rtl8192_read_eeprom_info\n");
 
@@ -2328,10 +2307,6 @@ static void rtl8192_read_eeprom_info(struct r8192_priv *priv)
 		priv->eeprom_ChannelPlan = usValue&0xff;
 		IC_Version = ((usValue&0xff00)>>8);
 
-#ifdef RTL8190P
-		priv->card_8192_version = (VERSION_8190)(IC_Version);
-#else
-	#ifdef RTL8192E
 		ICVer8192 = (IC_Version&0xf);		//bit0~3; 1:A cut, 2:B cut, 3:C cut...
 		ICVer8256 = ((IC_Version&0xf0)>>4);//bit4~6, bit7 reserved for other RF chip; 1:A cut, 2:B cut, 3:C cut...
 		RT_TRACE(COMP_INIT, "\nICVer8192 = 0x%x\n", ICVer8192);
@@ -2341,8 +2316,7 @@ static void rtl8192_read_eeprom_info(struct r8192_priv *priv)
 			if(ICVer8256 == 0x5) //E-cut
 				priv->card_8192_version= VERSION_8190_BE;
 		}
-	#endif
-#endif
+
 		switch(priv->card_8192_version)
 		{
 			case VERSION_8190_BD:
@@ -2476,82 +2450,7 @@ static void rtl8192_read_eeprom_info(struct r8192_priv *priv)
 			RT_TRACE(COMP_INIT, "OFDM 2.4G Tx Power Level, Index %d = 0x%02x\n", i+1, priv->EEPROMTxPowerLevelOFDM24G[i+1]);
 		}
 		}
-		else if(priv->epromtype== EPROM_93c56)
-		{
-		#ifdef RTL8190P
-			// Read CrystalCap from EEPROM
-			if(!priv->AutoloadFailFlag)
-			{
-				priv->EEPROMAntPwDiff = EEPROM_Default_AntTxPowerDiff;
-				priv->EEPROMCrystalCap = (u8)(((eprom_read(dev, (EEPROM_C56_CrystalCap>>1))) & 0xf000)>>12);
-			}
-			else
-			{
-				priv->EEPROMAntPwDiff = EEPROM_Default_AntTxPowerDiff;
-				priv->EEPROMCrystalCap = EEPROM_Default_TxPwDiff_CrystalCap;
-			}
-			RT_TRACE(COMP_INIT,"EEPROMAntPwDiff = %d\n", priv->EEPROMAntPwDiff);
-			RT_TRACE(COMP_INIT, "EEPROMCrystalCap = %d\n", priv->EEPROMCrystalCap);
-
-			// Get Tx Power Level by Channel
-			if(!priv->AutoloadFailFlag)
-			{
-				    // Read Tx power of Channel 1 ~ 14 from EEPROM.
-			       for(i = 0; i < 12; i+=2)
-				{
-					if (i <6)
-						offset = EEPROM_C56_RfA_CCK_Chnl1_TxPwIndex + i;
-					else
-						offset = EEPROM_C56_RfC_CCK_Chnl1_TxPwIndex + i - 6;
-					usValue = eprom_read(dev, (offset>>1));
-				       *((u16*)(&EepromTxPower[i])) = usValue;
-				}
-
-			       for(i = 0; i < 12; i++)
-			       	{
-			       		if (i <= 2)
-						priv->EEPROMRfACCKChnl1TxPwLevel[i] = EepromTxPower[i];
-					else if ((i >=3 )&&(i <= 5))
-						priv->EEPROMRfAOfdmChnlTxPwLevel[i-3] = EepromTxPower[i];
-					else if ((i >=6 )&&(i <= 8))
-						priv->EEPROMRfCCCKChnl1TxPwLevel[i-6] = EepromTxPower[i];
-					else
-						priv->EEPROMRfCOfdmChnlTxPwLevel[i-9] = EepromTxPower[i];
-				}
-			}
-			else
-			{
-				priv->EEPROMRfACCKChnl1TxPwLevel[0] = EEPROM_Default_TxPowerLevel;
-				priv->EEPROMRfACCKChnl1TxPwLevel[1] = EEPROM_Default_TxPowerLevel;
-				priv->EEPROMRfACCKChnl1TxPwLevel[2] = EEPROM_Default_TxPowerLevel;
 
-				priv->EEPROMRfAOfdmChnlTxPwLevel[0] = EEPROM_Default_TxPowerLevel;
-				priv->EEPROMRfAOfdmChnlTxPwLevel[1] = EEPROM_Default_TxPowerLevel;
-				priv->EEPROMRfAOfdmChnlTxPwLevel[2] = EEPROM_Default_TxPowerLevel;
-
-				priv->EEPROMRfCCCKChnl1TxPwLevel[0] = EEPROM_Default_TxPowerLevel;
-				priv->EEPROMRfCCCKChnl1TxPwLevel[1] = EEPROM_Default_TxPowerLevel;
-				priv->EEPROMRfCCCKChnl1TxPwLevel[2] = EEPROM_Default_TxPowerLevel;
-
-				priv->EEPROMRfCOfdmChnlTxPwLevel[0] = EEPROM_Default_TxPowerLevel;
-				priv->EEPROMRfCOfdmChnlTxPwLevel[1] = EEPROM_Default_TxPowerLevel;
-				priv->EEPROMRfCOfdmChnlTxPwLevel[2] = EEPROM_Default_TxPowerLevel;
-			}
-			RT_TRACE(COMP_INIT, "priv->EEPROMRfACCKChnl1TxPwLevel[0] = 0x%x\n", priv->EEPROMRfACCKChnl1TxPwLevel[0]);
-			RT_TRACE(COMP_INIT, "priv->EEPROMRfACCKChnl1TxPwLevel[1] = 0x%x\n", priv->EEPROMRfACCKChnl1TxPwLevel[1]);
-			RT_TRACE(COMP_INIT, "priv->EEPROMRfACCKChnl1TxPwLevel[2] = 0x%x\n", priv->EEPROMRfACCKChnl1TxPwLevel[2]);
-			RT_TRACE(COMP_INIT, "priv->EEPROMRfAOfdmChnlTxPwLevel[0] = 0x%x\n", priv->EEPROMRfAOfdmChnlTxPwLevel[0]);
-			RT_TRACE(COMP_INIT, "priv->EEPROMRfAOfdmChnlTxPwLevel[1] = 0x%x\n", priv->EEPROMRfAOfdmChnlTxPwLevel[1]);
-			RT_TRACE(COMP_INIT, "priv->EEPROMRfAOfdmChnlTxPwLevel[2] = 0x%x\n", priv->EEPROMRfAOfdmChnlTxPwLevel[2]);
-			RT_TRACE(COMP_INIT, "priv->EEPROMRfCCCKChnl1TxPwLevel[0] = 0x%x\n", priv->EEPROMRfCCCKChnl1TxPwLevel[0]);
-			RT_TRACE(COMP_INIT, "priv->EEPROMRfCCCKChnl1TxPwLevel[1] = 0x%x\n", priv->EEPROMRfCCCKChnl1TxPwLevel[1]);
-			RT_TRACE(COMP_INIT, "priv->EEPROMRfCCCKChnl1TxPwLevel[2] = 0x%x\n", priv->EEPROMRfCCCKChnl1TxPwLevel[2]);
-			RT_TRACE(COMP_INIT, "priv->EEPROMRfCOfdmChnlTxPwLevel[0] = 0x%x\n", priv->EEPROMRfCOfdmChnlTxPwLevel[0]);
-			RT_TRACE(COMP_INIT, "priv->EEPROMRfCOfdmChnlTxPwLevel[1] = 0x%x\n", priv->EEPROMRfCOfdmChnlTxPwLevel[1]);
-			RT_TRACE(COMP_INIT, "priv->EEPROMRfCOfdmChnlTxPwLevel[2] = 0x%x\n", priv->EEPROMRfCOfdmChnlTxPwLevel[2]);
-#endif
-
-		}
 		//
 		// Update HAL variables.
 		//
@@ -2711,13 +2610,7 @@ static void rtl8192_read_eeprom_info(struct r8192_priv *priv)
 	switch(priv->CustomerID)
 	{
 		case RT_CID_DEFAULT:
-		#ifdef RTL8190P
-			priv->LedStrategy = HW_LED;
-		#else
-			#ifdef RTL8192E
 			priv->LedStrategy = SW_LED_MODE1;
-			#endif
-		#endif
 			break;
 
 		case RT_CID_819x_CAMEO:
@@ -2745,13 +2638,7 @@ static void rtl8192_read_eeprom_info(struct r8192_priv *priv)
 			//break;
 
 		default:
-		#ifdef RTL8190P
-			priv->LedStrategy = HW_LED;
-		#else
-			#ifdef RTL8192E
 			priv->LedStrategy = SW_LED_MODE1;
-			#endif
-		#endif
 			break;
 	}
 
@@ -2917,13 +2804,8 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
 	RT_STATUS rtStatus = RT_STATUS_SUCCESS;
 	//u8 eRFPath;
 	u8 tmpvalue;
-#ifdef RTL8192E
 	u8 ICVersion,SwitchingRegulatorOutput;
-#endif
 	bool bfirmwareok = true;
-#ifdef RTL8190P
-	u8 ucRegRead;
-#endif
 	u32	tmpRegA, tmpRegC, TempCCk;
 	int	i =0;
 
@@ -2932,7 +2814,7 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
         rtl8192_pci_resetdescring(dev);
 	// 2007/11/02 MH Before initalizing RF. We can not use FW to do RF-R/W.
 	priv->Rf_Mode = RF_OP_By_SW_3wire;
-#ifdef RTL8192E
+
         //dPLL on
         if(priv->ResetProgress == RESET_TYPE_NORESET)
         {
@@ -2941,7 +2823,7 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
             // Joseph increae the time to prevent firmware download fail
             mdelay(500);
         }
-#endif
+
 	//PlatformSleepUs(10000);
 	// For any kind of InitializeAdapter process, we shall use system now!!
 	priv->pFirmware->firmware_status = FW_STATUS_0_INIT;
@@ -2959,16 +2841,9 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
 	else
 		RT_TRACE(COMP_ERR, "ERROR in %s(): undefined firmware state(%d)\n", __FUNCTION__,   priv->pFirmware->firmware_status);
 
-#ifdef RTL8190P
-	//2008.06.03, for WOL 90 hw bug
-	ulRegRead &= (~(CPU_GEN_GPIO_UART));
-#endif
-
 	write_nic_dword(priv, CPU_GEN, ulRegRead);
 	//mdelay(100);
 
-#ifdef RTL8192E
-
 	//3//
 	//3 //Fix the issue of E-cut high temperature issue
 	//3//
@@ -2987,8 +2862,6 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
 			write_nic_byte(priv, SWREGULATOR, 0xb8);
 		}
 	}
-#endif
-
 
 	//3//
 	//3// Initialize BB before MAC
@@ -3042,16 +2915,9 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
 	write_nic_byte(priv, CMDR, CR_RE|CR_TE);
 
 	//2Set Tx dma burst
-#ifdef RTL8190P
-	write_nic_byte(priv, PCIF, ((MXDMA2_NoLimit<<MXDMA2_RX_SHIFT) |
-			(MXDMA2_NoLimit<<MXDMA2_TX_SHIFT) |
-			(1<<MULRW_SHIFT)));
-#else
-	#ifdef RTL8192E
 	write_nic_byte(priv, PCIF, ((MXDMA2_NoLimit<<MXDMA2_RX_SHIFT) |
 				   (MXDMA2_NoLimit<<MXDMA2_TX_SHIFT) ));
-	#endif
-#endif
+
 	//set IDR0 here
 	write_nic_dword(priv, MAC0, ((u32*)dev->dev_addr)[0]);
 	write_nic_word(priv, MAC4, ((u16*)(dev->dev_addr + 4))[0]);
@@ -3185,20 +3051,8 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
 	rtl8192_setBBreg(dev, rFPGA0_RFMOD, bCCKEn, 0x1);
 	rtl8192_setBBreg(dev, rFPGA0_RFMOD, bOFDMEn, 0x1);
 
-#ifdef RTL8192E
 	//Enable Led
 	write_nic_byte(priv, 0x87, 0x0);
-#endif
-#ifdef RTL8190P
-	//2008.06.03, for WOL
-	ucRegRead = read_nic_byte(priv, GPE);
-	ucRegRead |= BIT0;
-	write_nic_byte(priv, GPE, ucRegRead);
-
-	ucRegRead = read_nic_byte(priv, GPO);
-	ucRegRead &= ~BIT0;
-	write_nic_byte(priv, GPO, ucRegRead);
-#endif
 
 	//2=======================================================
 	// RF Power Save
@@ -3236,69 +3090,12 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
 	}
 }
 #endif
-	if(1){
-#ifdef RTL8192E
-			// We can force firmware to do RF-R/W
-			if(priv->ieee80211->FwRWRF)
-				priv->Rf_Mode = RF_OP_By_FW;
-			else
-				priv->Rf_Mode = RF_OP_By_SW_3wire;
-#else
-			priv->Rf_Mode = RF_OP_By_SW_3wire;
-#endif
-	}
-#ifdef RTL8190P
-	if(priv->ResetProgress == RESET_TYPE_NORESET)
-	{
-		dm_initialize_txpower_tracking(dev);
-
-		tmpRegA= rtl8192_QueryBBReg(dev,rOFDM0_XATxIQImbalance,bMaskDWord);
-		tmpRegC= rtl8192_QueryBBReg(dev,rOFDM0_XCTxIQImbalance,bMaskDWord);
-
-		if(priv->rf_type == RF_2T4R){
-		for(i = 0; i<TxBBGainTableLength; i++)
-		{
-			if(tmpRegA == priv->txbbgain_table[i].txbbgain_value)
-			{
-				priv->rfa_txpowertrackingindex= (u8)i;
-				priv->rfa_txpowertrackingindex_real= (u8)i;
-				priv->rfa_txpowertracking_default = priv->rfa_txpowertrackingindex;
-				break;
-			}
-		}
-		}
-		for(i = 0; i<TxBBGainTableLength; i++)
-		{
-			if(tmpRegC == priv->txbbgain_table[i].txbbgain_value)
-			{
-				priv->rfc_txpowertrackingindex= (u8)i;
-				priv->rfc_txpowertrackingindex_real= (u8)i;
-				priv->rfc_txpowertracking_default = priv->rfc_txpowertrackingindex;
-				break;
-			}
-		}
-		TempCCk = rtl8192_QueryBBReg(dev, rCCK0_TxFilter1, bMaskByte2);
+	// We can force firmware to do RF-R/W
+	if(priv->ieee80211->FwRWRF)
+		priv->Rf_Mode = RF_OP_By_FW;
+	else
+		priv->Rf_Mode = RF_OP_By_SW_3wire;
 
-		for(i=0 ; i<CCKTxBBGainTableLength ; i++)
-		{
-			if(TempCCk == priv->cck_txbbgain_table[i].ccktxbb_valuearray[0])
-			{
-				priv->CCKPresentAttentuation_20Mdefault =(u8) i;
-				break;
-			}
-		}
-		priv->CCKPresentAttentuation_40Mdefault = 0;
-		priv->CCKPresentAttentuation_difference = 0;
-		priv->CCKPresentAttentuation = priv->CCKPresentAttentuation_20Mdefault;
-		RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex_initial = %d\n", priv->rfa_txpowertrackingindex);
-		RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex_real__initial = %d\n", priv->rfa_txpowertrackingindex_real);
-		RT_TRACE(COMP_POWER_TRACKING, "priv->rfc_txpowertrackingindex_initial = %d\n", priv->rfc_txpowertrackingindex);
-		RT_TRACE(COMP_POWER_TRACKING, "priv->rfc_txpowertrackingindex_real_initial = %d\n", priv->rfc_txpowertrackingindex_real);
-		RT_TRACE(COMP_POWER_TRACKING, "priv->CCKPresentAttentuation_difference_initial = %d\n", priv->CCKPresentAttentuation_difference);
-		RT_TRACE(COMP_POWER_TRACKING, "priv->CCKPresentAttentuation_initial = %d\n", priv->CCKPresentAttentuation);
-	}
-#else
-	#ifdef RTL8192E
 	if(priv->ResetProgress == RESET_TYPE_NORESET)
 	{
 		dm_initialize_txpower_tracking(dev);
@@ -3338,8 +3135,7 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
 			priv->btxpower_tracking = FALSE;//TEMPLY DISABLE
 		}
 	}
-	#endif
-#endif
+
 	rtl8192_irq_enable(dev);
 	priv->being_init_adapter = false;
 	return rtStatus;
@@ -4260,10 +4056,10 @@ static int _rtl8192_up(struct net_device *dev)
 		return -1;
 	}
 	RT_TRACE(COMP_INIT, "start adapter finished\n");
-#ifdef RTL8192E
+
 	if(priv->ieee80211->eRFPowerState!=eRfOn)
 		MgntActSet_RF_State(dev, eRfOn, priv->ieee80211->RfOffReason);
-#endif
+
 	if(priv->ieee80211->state != IEEE80211_LINKED)
 	ieee80211_softmac_start_protocol(priv->ieee80211);
 	ieee80211_reset_queue(priv->ieee80211);
@@ -4603,67 +4399,6 @@ static long rtl819x_translate_todbm(u8 signal_strength_index)// 0-100 index.
 	return signal_power;
 }
 
-static void
-rtl8190_process_cck_rxpathsel(
-	struct r8192_priv * priv,
-	struct ieee80211_rx_stats * pprevious_stats
-	)
-{
-#ifdef RTL8190P	//Only 90P 2T4R need to check
-	char				last_cck_adc_pwdb[4]={0,0,0,0};
-	u8				i;
-//cosa add for Rx path selection
-		if(priv->rf_type == RF_2T4R && DM_RxPathSelTable.Enable)
-		{
-			if(pprevious_stats->bIsCCK &&
-				(pprevious_stats->bPacketToSelf ||pprevious_stats->bPacketBeacon))
-			{
-				/* record the cck adc_pwdb to the sliding window. */
-				if(priv->stats.cck_adc_pwdb.TotalNum++ >= PHY_RSSI_SLID_WIN_MAX)
-				{
-					priv->stats.cck_adc_pwdb.TotalNum = PHY_RSSI_SLID_WIN_MAX;
-					for(i=RF90_PATH_A; i<RF90_PATH_MAX; i++)
-					{
-						last_cck_adc_pwdb[i] = priv->stats.cck_adc_pwdb.elements[i][priv->stats.cck_adc_pwdb.index];
-						priv->stats.cck_adc_pwdb.TotalVal[i] -= last_cck_adc_pwdb[i];
-					}
-				}
-				for(i=RF90_PATH_A; i<RF90_PATH_MAX; i++)
-				{
-					priv->stats.cck_adc_pwdb.TotalVal[i] += pprevious_stats->cck_adc_pwdb[i];
-					priv->stats.cck_adc_pwdb.elements[i][priv->stats.cck_adc_pwdb.index] = pprevious_stats->cck_adc_pwdb[i];
-				}
-				priv->stats.cck_adc_pwdb.index++;
-				if(priv->stats.cck_adc_pwdb.index >= PHY_RSSI_SLID_WIN_MAX)
-					priv->stats.cck_adc_pwdb.index = 0;
-
-				for(i=RF90_PATH_A; i<RF90_PATH_MAX; i++)
-				{
-					DM_RxPathSelTable.cck_pwdb_sta[i] = priv->stats.cck_adc_pwdb.TotalVal[i]/priv->stats.cck_adc_pwdb.TotalNum;
-				}
-
-				for(i=RF90_PATH_A; i<RF90_PATH_MAX; i++)
-				{
-					if(pprevious_stats->cck_adc_pwdb[i]  > (char)priv->undecorated_smoothed_cck_adc_pwdb[i])
-					{
-						priv->undecorated_smoothed_cck_adc_pwdb[i] =
-							( (priv->undecorated_smoothed_cck_adc_pwdb[i]*(Rx_Smooth_Factor-1)) +
-							(pprevious_stats->cck_adc_pwdb[i])) /(Rx_Smooth_Factor);
-						priv->undecorated_smoothed_cck_adc_pwdb[i] = priv->undecorated_smoothed_cck_adc_pwdb[i] + 1;
-					}
-					else
-					{
-						priv->undecorated_smoothed_cck_adc_pwdb[i] =
-							( (priv->undecorated_smoothed_cck_adc_pwdb[i]*(Rx_Smooth_Factor-1)) +
-							(pprevious_stats->cck_adc_pwdb[i])) /(Rx_Smooth_Factor);
-					}
-				}
-			}
-		}
-#endif
-}
-
-
 /* 2008/01/22 MH We can not delcare RSSI/EVM total value of sliding window to
 	be a local static. Otherwise, it may increase when we return from S3/S4. The
 	value will be kept in memory or disk. We must delcare the value in adapter
@@ -4730,8 +4465,6 @@ static void rtl8192_process_phyinfo(struct r8192_priv * priv, u8* buffer,struct
 	if(!bcheck)
 		return;
 
-	rtl8190_process_cck_rxpathsel(priv,pprevious_stats);
-
 	// <2> Showed on UI for engineering
 	// hardware does not provide rssi information for each rf path in CCK
 	if(!pprevious_stats->bIsCCK && pprevious_stats->bPacketToSelf)
@@ -5019,23 +4752,6 @@ static void rtl8192_query_rxphystatus(
 		// (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive)
 		//
 		u8 report;//, cck_agc_rpt;
-#ifdef RTL8190P
-		u8 tmp_pwdb;
-		char cck_adc_pwdb[4];
-#endif
-
-#ifdef RTL8190P	//Only 90P 2T4R need to check
-		if(priv->rf_type == RF_2T4R && DM_RxPathSelTable.Enable && bpacket_match_bssid)
-		{
-			for(i=RF90_PATH_A; i<RF90_PATH_MAX; i++)
-			{
-				tmp_pwdb = pcck_buf->adc_pwdb_X[i];
-				cck_adc_pwdb[i] = (char)tmp_pwdb;
-				cck_adc_pwdb[i] /= 2;
-				pstats->cck_adc_pwdb[i] = precord_stats->cck_adc_pwdb[i] = cck_adc_pwdb[i];
-			}
-		}
-#endif
 
 		if (!priv->phy_reg824_bit9)
 		{
@@ -5126,11 +4842,7 @@ static void rtl8192_query_rxphystatus(
 
 			//Fixed by Jacken from Bryant 2008-03-20
 			//Original value is 106
-#ifdef RTL8190P	   //Modify by Jacken 2008/03/31
-			rx_pwr[i] = ((pofdm_buf->trsw_gain_X[i]&0x3F)*2) - 106;
-#else
 			rx_pwr[i] = ((pofdm_buf->trsw_gain_X[i]&0x3F)*2) - 110;
-#endif
 
 			//Get Rx snr value in DB
 			tmp_rxsnr = pofdm_buf->rxsnr_X[i];
@@ -5699,9 +5411,7 @@ static void rtl8192_cancel_deferred_work(struct r8192_priv* priv)
 	cancel_delayed_work(&priv->update_beacon_wq);
 	cancel_delayed_work(&priv->ieee80211->hw_wakeup_wq);
 	cancel_delayed_work(&priv->ieee80211->hw_sleep_wq);
-#ifdef RTL8192E
 	cancel_delayed_work(&priv->gpio_change_rf_wq);
-#endif
 	cancel_work_sync(&priv->reset_wq);
 	cancel_work_sync(&priv->qos_activate);
 	//cancel_work_sync(&priv->SetBWModeWorkItem);

drivers/staging/rtl8192e/r8192E_dm.c

@@ -25,24 +25,10 @@ Major Change History:
 //
 // Indicate different AP vendor for IOT issue.
 //
-#ifdef  RTL8190P
-static const u32 edca_setting_DL[HT_IOT_PEER_MAX] =
-{ 0x5e4322, 	0x5e4322, 	0x5e4322,  	0x604322, 	0xa44f, 	0x5e4322,	0x5e4322};
-static const u32 edca_setting_UL[HT_IOT_PEER_MAX] =
-{ 0x5e4322, 	0xa44f, 	0x5e4322,  	0x604322, 	0x5e4322, 	0x5e4322,	0x5e4322};
-#else
-#ifdef RTL8192E
 static const u32 edca_setting_DL[HT_IOT_PEER_MAX] =
 { 0x5e4322, 	0x5e4322, 	0x5e4322, 	0x604322, 	0xa44f, 	0x5e4322,	0x5e4322};
 static const u32 edca_setting_UL[HT_IOT_PEER_MAX] =
 { 0x5e4322, 	0xa44f,		0x5e4322,  	0x604322, 	0x5e4322, 	0x5e4322, 	0x5e4322};
-#else
-static const u32 edca_setting_DL[HT_IOT_PEER_MAX] =
-{ 0x5e4322, 	0x5e4322, 	0x5e4322, 	0x604322, 	0xa44f, 	0x5ea44f, 	0x5e4322};
-static const u32 edca_setting_UL[HT_IOT_PEER_MAX] =
-{ 0x5e4322, 	0xa44f, 	0x5e4322, 	0x604322, 	0x5ea44f, 	0x5ea44f, 	0x5e4322};
-#endif
-#endif
 
 #define RTK_UL_EDCA 0xa44f
 #define RTK_DL_EDCA 0x5e4322
@@ -82,9 +68,7 @@ extern	void dm_fsync_timer_callback(unsigned long data);
 extern	void dm_check_fsync(struct net_device *dev);
 extern	void dm_initialize_txpower_tracking(struct net_device *dev);
 
-#ifdef RTL8192E
 extern  void    dm_gpio_change_rf_callback(struct work_struct *work);
-#endif
 
 
 // DM --> Rate Adaptive
@@ -97,14 +81,6 @@ static	void	dm_bandwidth_autoswitch(	struct net_device *dev);
 // DM --> TX power control
 static	void	dm_check_txpower_tracking(struct net_device *dev);
 
-// DM --> BB init gain restore
-#ifndef RTL8192U
-static	void	dm_bb_initialgain_restore(struct net_device *dev);
-
-// DM --> BB init gain backup
-static	void	dm_bb_initialgain_backup(struct net_device *dev);
-#endif
-
 // DM --> Dynamic Init Gain by RSSI
 static	void	dm_dig_init(struct net_device *dev);
 static	void	dm_ctrl_initgain_byrssi(struct net_device *dev);
@@ -166,9 +142,7 @@ void init_hal_dm(struct net_device *dev)
 	dm_init_fsync(dev);
 	dm_init_rxpath_selection(dev);
 	dm_init_ctstoself(dev);
-#ifdef RTL8192E
 	INIT_DELAYED_WORK(&priv->gpio_change_rf_wq,  dm_gpio_change_rf_callback);
-#endif
 
 }
 
@@ -503,7 +477,6 @@ static void dm_bandwidth_autoswitch(struct net_device * dev)
 }
 
 //OFDM default at 0db, index=6.
-#ifndef RTL8190P
 static const u32 OFDMSwingTable[OFDM_Table_Length] = {
 	0x7f8001fe,	// 0, +6db
 	0x71c001c7,	// 1, +5db
@@ -554,7 +527,7 @@ static const u8 CCKSwingTable_Ch14[CCK_Table_length][8] = {
 	{0x11, 0x11, 0x0f, 0x09, 0x00, 0x00, 0x00, 0x00},	// 10, -10db
 	{0x0f, 0x0f, 0x0d, 0x08, 0x00, 0x00, 0x00, 0x00}	// 11, -11db
 };
-#endif
+
 #define		Pw_Track_Flag				0x11d
 #define		Tssi_Mea_Value				0x13c
 #define		Tssi_Report_Value1			0x134
@@ -571,9 +544,6 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev)
 	u32						Value;
 	u8						Pwr_Flag;
 	u16					Avg_TSSI_Meas, TSSI_13dBm, Avg_TSSI_Meas_from_driver=0;
-#ifdef RTL8192U
-	RT_STATUS 				rtStatus = RT_STATUS_SUCCESS;
-#endif
 //	bool rtStatus = true;
 	u32						delta=0;
 	RT_TRACE(COMP_POWER_TRACKING,"%s()\n",__FUNCTION__);
@@ -595,15 +565,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev)
 	tx_cmd.Op		= TXCMD_SET_TX_PWR_TRACKING;
 	tx_cmd.Length	= 4;
 	tx_cmd.Value		= Value;
-#ifdef RTL8192U
-	rtStatus = SendTxCommandPacket(dev, &tx_cmd, 12);
-	if (rtStatus == RT_STATUS_FAILURE)
-	{
-		RT_TRACE(COMP_POWER_TRACKING, "Set configuration with tx cmd queue fail!\n");
-	}
-#else
 	cmpk_message_handle_tx(dev, (u8*)&tx_cmd, DESC_PACKET_TYPE_INIT, sizeof(DCMD_TXCMD_T));
-#endif
 	mdelay(1);
 
 	for(i = 0;i <= 30; i++)
@@ -679,10 +641,6 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev)
 			RT_TRACE(COMP_POWER_TRACKING, "tx power track is done\n");
 			RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex = %d\n", priv->rfa_txpowertrackingindex);
 			RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex_real = %d\n", priv->rfa_txpowertrackingindex_real);
-#ifdef RTL8190P
-			RT_TRACE(COMP_POWER_TRACKING, "priv->rfc_txpowertrackingindex = %d\n", priv->rfc_txpowertrackingindex);
-			RT_TRACE(COMP_POWER_TRACKING, "priv->rfc_txpowertrackingindex_real = %d\n", priv->rfc_txpowertrackingindex_real);
-#endif
 			RT_TRACE(COMP_POWER_TRACKING, "priv->CCKPresentAttentuation_difference = %d\n", priv->CCKPresentAttentuation_difference);
 			RT_TRACE(COMP_POWER_TRACKING, "priv->CCKPresentAttentuation = %d\n", priv->CCKPresentAttentuation);
 			return;
@@ -798,10 +756,6 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev)
 			}
 		RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex = %d\n", priv->rfa_txpowertrackingindex);
 		RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex_real = %d\n", priv->rfa_txpowertrackingindex_real);
-#ifdef RTL8190P
-		RT_TRACE(COMP_POWER_TRACKING, "priv->rfc_txpowertrackingindex = %d\n", priv->rfc_txpowertrackingindex);
-		RT_TRACE(COMP_POWER_TRACKING, "priv->rfc_txpowertrackingindex_real = %d\n", priv->rfc_txpowertrackingindex_real);
-#endif
 		RT_TRACE(COMP_POWER_TRACKING, "priv->CCKPresentAttentuation_difference = %d\n", priv->CCKPresentAttentuation_difference);
 		RT_TRACE(COMP_POWER_TRACKING, "priv->CCKPresentAttentuation = %d\n", priv->CCKPresentAttentuation);
 
@@ -827,7 +781,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev)
 		priv->ieee80211->bdynamic_txpower_enable = TRUE;
 		write_nic_byte(priv, Pw_Track_Flag, 0);
 }
-#ifndef RTL8190P
+
 static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev)
 {
 #define ThermalMeterVal	9
@@ -941,22 +895,17 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev)
 	}
 	priv->txpower_count = 0;
 }
-#endif
+
 void dm_txpower_trackingcallback(struct work_struct *work)
 {
 	struct delayed_work *dwork = container_of(work,struct delayed_work,work);
        struct r8192_priv *priv = container_of(dwork,struct r8192_priv,txpower_tracking_wq);
        struct net_device *dev = priv->ieee80211->dev;
 
-#ifdef RTL8190P
-	dm_TXPowerTrackingCallback_TSSI(dev);
-#else
-	//if(priv->bDcut == TRUE)
 	if(priv->IC_Cut >= IC_VersionCut_D)
 		dm_TXPowerTrackingCallback_TSSI(dev);
 	else
 		dm_TXPowerTrackingCallback_ThermalMeter(dev);
-#endif
 }
 
 
@@ -1073,7 +1022,7 @@ static void dm_InitializeTXPowerTracking_TSSI(struct net_device *dev)
 	priv->btxpower_trackingInit = FALSE;
 
 }
-#ifndef RTL8190P
+
 static void dm_InitializeTXPowerTracking_ThermalMeter(struct net_device *dev)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
@@ -1088,21 +1037,15 @@ static void dm_InitializeTXPowerTracking_ThermalMeter(struct net_device *dev)
 	priv->txpower_count       = 0;
 	priv->btxpower_trackingInit = FALSE;
 }
-#endif
 
 void dm_initialize_txpower_tracking(struct net_device *dev)
 {
-#ifndef RTL8190P
 	struct r8192_priv *priv = ieee80211_priv(dev);
-#endif
-#ifdef RTL8190P
-	dm_InitializeTXPowerTracking_TSSI(dev);
-#else
+
 	if(priv->IC_Cut >= IC_VersionCut_D)
 		dm_InitializeTXPowerTracking_TSSI(dev);
 	else
 		dm_InitializeTXPowerTracking_ThermalMeter(dev);
-#endif
 }
 
 
@@ -1123,7 +1066,6 @@ static void dm_CheckTXPowerTracking_TSSI(struct net_device *dev)
 	}
 }
 
-#ifndef RTL8190P
 static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
@@ -1156,24 +1098,15 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
 		TM_Trigger = 0;
 	}
 }
-#endif
 
 static void dm_check_txpower_tracking(struct net_device *dev)
 {
-#ifndef RTL8190P
 	struct r8192_priv *priv = ieee80211_priv(dev);
-	//static u32 tx_power_track_counter = 0;
-#endif
-#ifdef  RTL8190P
-	dm_CheckTXPowerTracking_TSSI(dev);
-#else
-	//if(priv->bDcut == TRUE)
+
 	if(priv->IC_Cut >= IC_VersionCut_D)
 		dm_CheckTXPowerTracking_TSSI(dev);
 	else
 		dm_CheckTXPowerTracking_ThermalMeter(dev);
-#endif
-
 }
 
 
@@ -1226,7 +1159,7 @@ static void dm_CCKTxPowerAdjust_TSSI(struct net_device *dev, bool  bInCH14)
 
 
 }
-#ifndef RTL8190P
+
 static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev,	bool  bInCH14)
 {
 	u32 TempVal;
@@ -1288,158 +1221,17 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev,	bool  bInCH
 			rCCK0_DebugPort, TempVal);
 	}
 }
-#endif
-
 
 void dm_cck_txpower_adjust(struct net_device *dev, bool binch14)
 {
-#ifndef RTL8190P
 	struct r8192_priv *priv = ieee80211_priv(dev);
-#endif
-#ifdef RTL8190P
-	dm_CCKTxPowerAdjust_TSSI(dev, binch14);
-#else
+
 	if(priv->IC_Cut >= IC_VersionCut_D)
 		dm_CCKTxPowerAdjust_TSSI(dev, binch14);
 	else
 		dm_CCKTxPowerAdjust_ThermalMeter(dev, binch14);
-#endif
-}
-
-
-#ifndef  RTL8192U
-static void dm_txpower_reset_recovery(
-	struct net_device *dev
-)
-{
-	struct r8192_priv *priv = ieee80211_priv(dev);
-
-	RT_TRACE(COMP_POWER_TRACKING, "Start Reset Recovery ==>\n");
-	rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex].txbbgain_value);
-	RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: Fill in 0xc80 is %08x\n",priv->txbbgain_table[priv->rfa_txpowertrackingindex].txbbgain_value);
-	RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: Fill in RFA_txPowerTrackingIndex is %x\n",priv->rfa_txpowertrackingindex);
-	RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery : RF A I/Q Amplify Gain is %ld\n",priv->txbbgain_table[priv->rfa_txpowertrackingindex].txbb_iq_amplifygain);
-	RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: CCK Attenuation is %d dB\n",priv->CCKPresentAttentuation);
-	dm_cck_txpower_adjust(dev,priv->bcck_in_ch14);
-
-	rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex].txbbgain_value);
-	RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: Fill in 0xc90 is %08x\n",priv->txbbgain_table[priv->rfc_txpowertrackingindex].txbbgain_value);
-	RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: Fill in RFC_txPowerTrackingIndex is %x\n",priv->rfc_txpowertrackingindex);
-	RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery : RF C I/Q Amplify Gain is %ld\n",priv->txbbgain_table[priv->rfc_txpowertrackingindex].txbb_iq_amplifygain);
-
 }
 
-void dm_restore_dynamic_mechanism_state(struct net_device *dev)
-{
-	struct r8192_priv *priv = ieee80211_priv(dev);
-	u32 	reg_ratr = priv->rate_adaptive.last_ratr;
-
-	if(!priv->up)
-	{
-		RT_TRACE(COMP_RATE, "<---- dm_restore_dynamic_mechanism_state(): driver is going to unload\n");
-		return;
-	}
-
-	//
-	// Restore previous state for rate adaptive
-	//
-	if(priv->rate_adaptive.rate_adaptive_disabled)
-		return;
-	// TODO: Only 11n mode is implemented currently,
-	if( !(priv->ieee80211->mode==WIRELESS_MODE_N_24G ||
-		 priv->ieee80211->mode==WIRELESS_MODE_N_5G))
-		 return;
-	{
-			/* 2007/11/15 MH Copy from 8190PCI. */
-			u32 ratr_value;
-			ratr_value = reg_ratr;
-			if(priv->rf_type == RF_1T2R)	// 1T2R, Spatial Stream 2 should be disabled
-			{
-				ratr_value &=~ (RATE_ALL_OFDM_2SS);
-			}
-			write_nic_dword(priv, RATR0, ratr_value);
-			write_nic_byte(priv, UFWP, 1);
-	}
-	//Resore TX Power Tracking Index
-	if(priv->btxpower_trackingInit && priv->btxpower_tracking){
-		dm_txpower_reset_recovery(dev);
-	}
-
-	//
-	//Restore BB Initial Gain
-	//
-	dm_bb_initialgain_restore(dev);
-
-}
-
-static void dm_bb_initialgain_restore(struct net_device *dev)
-{
-	struct r8192_priv *priv = ieee80211_priv(dev);
-	u32 bit_mask = 0x7f; //Bit0~ Bit6
-
-	if(dm_digtable.dig_algorithm == DIG_ALGO_BY_RSSI)
-		return;
-
-	//Disable Initial Gain
-	//PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x800);
-	rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8);	// Only clear byte 1 and rewrite.
-	rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, bit_mask, (u32)priv->initgain_backup.xaagccore1);
-	rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, bit_mask, (u32)priv->initgain_backup.xbagccore1);
-	rtl8192_setBBreg(dev, rOFDM0_XCAGCCore1, bit_mask, (u32)priv->initgain_backup.xcagccore1);
-	rtl8192_setBBreg(dev, rOFDM0_XDAGCCore1, bit_mask, (u32)priv->initgain_backup.xdagccore1);
-	bit_mask  = bMaskByte2;
-	rtl8192_setBBreg(dev, rCCK0_CCA, bit_mask, (u32)priv->initgain_backup.cca);
-
-	RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc50 is %x\n",priv->initgain_backup.xaagccore1);
-	RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc58 is %x\n",priv->initgain_backup.xbagccore1);
-	RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc60 is %x\n",priv->initgain_backup.xcagccore1);
-	RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc68 is %x\n",priv->initgain_backup.xdagccore1);
-	RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xa0a is %x\n",priv->initgain_backup.cca);
-	//Enable Initial Gain
-	//PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x100);
-	rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1);	// Only clear byte 1 and rewrite.
-
-}
-
-
-void dm_backup_dynamic_mechanism_state(struct net_device *dev)
-{
-	struct r8192_priv *priv = ieee80211_priv(dev);
-
-	// Fsync to avoid reset
-	priv->bswitch_fsync  = false;
-	//Backup BB InitialGain
-	dm_bb_initialgain_backup(dev);
-
-}
-
-
-static void dm_bb_initialgain_backup(struct net_device *dev)
-{
-	struct r8192_priv *priv = ieee80211_priv(dev);
-	u32 bit_mask = bMaskByte0; //Bit0~ Bit6
-
-	if(dm_digtable.dig_algorithm == DIG_ALGO_BY_RSSI)
-		return;
-
-	//PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x800);
-	rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8);	// Only clear byte 1 and rewrite.
-	priv->initgain_backup.xaagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, bit_mask);
-	priv->initgain_backup.xbagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, bit_mask);
-	priv->initgain_backup.xcagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, bit_mask);
-	priv->initgain_backup.xdagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XDAGCCore1, bit_mask);
-	bit_mask  = bMaskByte2;
-	priv->initgain_backup.cca = (u8)rtl8192_QueryBBReg(dev, rCCK0_CCA, bit_mask);
-
-	RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xc50 is %x\n",priv->initgain_backup.xaagccore1);
-	RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xc58 is %x\n",priv->initgain_backup.xbagccore1);
-	RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xc60 is %x\n",priv->initgain_backup.xcagccore1);
-	RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xc68 is %x\n",priv->initgain_backup.xdagccore1);
-	RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xa0a is %x\n",priv->initgain_backup.cca);
-
-}
-
-#endif
 
 void dm_change_dynamic_initgain_thresh(struct net_device *dev, u32 dm_type, u32	dm_value)
 {
@@ -1660,19 +1452,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
 		{
 			/* 2008/01/11 MH 40MHZ 90/92 register are not the same. */
 			// 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
-			#ifdef RTL8190P
-			write_nic_byte(priv, rOFDM0_RxDetector1, 0x40);
-			#else
-				write_nic_byte(priv, (rOFDM0_XATxAFE+3), 0x00);
-				#endif
-			/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
-				write_nic_byte(pAdapter, rOFDM0_RxDetector1, 0x40);
-			*/
-			//else if (pAdapter->HardwareType == HARDWARE_TYPE_RTL8192E)
-
-
-			//else
-				//PlatformEFIOWrite1Byte(pAdapter, rOFDM0_RxDetector1, 0x40);
+			write_nic_byte(priv, (rOFDM0_XATxAFE+3), 0x00);
 		}
 		else
 			write_nic_byte(priv, rOFDM0_RxDetector1, 0x42);
@@ -1730,19 +1510,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
 		{
 			/* 2008/01/11 MH 40MHZ 90/92 register are not the same. */
 			// 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
-			#ifdef RTL8190P
-			write_nic_byte(priv, rOFDM0_RxDetector1, 0x42);
-			#else
-				write_nic_byte(priv, (rOFDM0_XATxAFE+3), 0x20);
-				#endif
-			/*
-			else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
-				write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
-			*/
-			//else if (pAdapter->HardwareType == HARDWARE_TYPE_RTL8192E)
-
-			//else
-				//PlatformEFIOWrite1Byte(pAdapter, rOFDM0_RxDetector1, 0x42);
+			write_nic_byte(priv, (rOFDM0_XATxAFE+3), 0x20);
 		}
 		else
 			write_nic_byte(priv, rOFDM0_RxDetector1, 0x44);
@@ -1790,16 +1558,7 @@ static void dm_ctrl_initgain_byrssi_highpwr(
 		// 3.1 Higher PD_TH for OFDM for high power state.
 		if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
 		{
-			#ifdef RTL8190P
-			write_nic_byte(priv, rOFDM0_RxDetector1, 0x41);
-			#else
-				write_nic_byte(priv, (rOFDM0_XATxAFE+3), 0x10);
-				#endif
-
-			/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
-				write_nic_byte(priv, rOFDM0_RxDetector1, 0x41);
-			*/
-
+			write_nic_byte(priv, (rOFDM0_XATxAFE+3), 0x10);
 		}
 		else
 			write_nic_byte(priv, rOFDM0_RxDetector1, 0x43);
@@ -1818,15 +1577,7 @@ static void dm_ctrl_initgain_byrssi_highpwr(
 			// 3.2 Recover PD_TH for OFDM for normal power region.
 			if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
 			{
-				#ifdef RTL8190P
-				write_nic_byte(priv, rOFDM0_RxDetector1, 0x42);
-				#else
-					write_nic_byte(priv, (rOFDM0_XATxAFE+3), 0x20);
-					#endif
-				/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
-					write_nic_byte(priv, rOFDM0_RxDetector1, 0x42);
-				*/
-
+				write_nic_byte(priv, (rOFDM0_XATxAFE+3), 0x20);
 			}
 			else
 				write_nic_byte(priv, rOFDM0_RxDetector1, 0x44);
@@ -1959,14 +1710,7 @@ static void dm_pd_th(
 				{
 					/* 2008/01/11 MH 40MHZ 90/92 register are not the same. */
 					// 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
-					#ifdef RTL8190P
-					write_nic_byte(priv, rOFDM0_RxDetector1, 0x40);
-					#else
-						write_nic_byte(priv, (rOFDM0_XATxAFE+3), 0x00);
-						#endif
-					/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
-						write_nic_byte(dev, rOFDM0_RxDetector1, 0x40);
-					*/
+					write_nic_byte(priv, (rOFDM0_XATxAFE+3), 0x00);
 				}
 				else
 					write_nic_byte(priv, rOFDM0_RxDetector1, 0x42);
@@ -1978,14 +1722,7 @@ static void dm_pd_th(
 				{
 					/* 2008/01/11 MH 40MHZ 90/92 register are not the same. */
 					// 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same.
-					#ifdef RTL8190P
-					write_nic_byte(priv, rOFDM0_RxDetector1, 0x42);
-					#else
-						write_nic_byte(priv, (rOFDM0_XATxAFE+3), 0x20);
-						#endif
-					/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
-						write_nic_byte(priv, rOFDM0_RxDetector1, 0x42);
-					*/
+					write_nic_byte(priv, (rOFDM0_XATxAFE+3), 0x20);
 				}
 				else
 					write_nic_byte(priv, rOFDM0_RxDetector1, 0x44);
@@ -1995,14 +1732,7 @@ static void dm_pd_th(
 				// Higher PD_TH for OFDM for high power state.
 				if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)
 				{
-					#ifdef RTL8190P
-					write_nic_byte(priv, rOFDM0_RxDetector1, 0x41);
-					#else
-						write_nic_byte(priv, (rOFDM0_XATxAFE+3), 0x10);
-						#endif
-					/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
-						write_nic_byte(priv, rOFDM0_RxDetector1, 0x41);
-					*/
+					write_nic_byte(priv, (rOFDM0_XATxAFE+3), 0x10);
 				}
 				else
 					write_nic_byte(priv, rOFDM0_RxDetector1, 0x43);
@@ -2243,51 +1973,21 @@ static void dm_ctstoself(struct net_device *dev)
 /* Copy 8187B template for 9xseries */
 static void dm_check_rfctrl_gpio(struct net_device * dev)
 {
-#ifdef RTL8192E
 	struct r8192_priv *priv = ieee80211_priv(dev);
-#endif
 
 	// Walk around for DTM test, we will not enable HW - radio on/off because r/w
 	// page 1 register before Lextra bus is enabled cause system fails when resuming
 	// from S4. 20080218, Emily
 
 	// Stop to execute workitem to prevent S3/S4 bug.
-#ifdef RTL8190P
-	return;
-#endif
-#ifdef RTL8192U
-	return;
-#endif
-#ifdef RTL8192E
-		queue_delayed_work(priv->priv_wq,&priv->gpio_change_rf_wq,0);
-#endif
-
+	queue_delayed_work(priv->priv_wq,&priv->gpio_change_rf_wq,0);
 }
 
 /* Check if PBC button is pressed. */
 static	void	dm_check_pbc_gpio(struct net_device *dev)
 {
-#ifdef RTL8192U
-	struct r8192_priv *priv = ieee80211_priv(dev);
-	u8 tmp1byte;
-
-
-	tmp1byte = read_nic_byte(priv, GPI);
-	if(tmp1byte == 0xff)
-		return;
-
-	if (tmp1byte&BIT6 || tmp1byte&BIT0)
-	{
-		// Here we only set bPbcPressed to TRUE
-		// After trigger PBC, the variable will be set to FALSE
-		RT_TRACE(COMP_IO, "CheckPbcGPIO - PBC is pressed\n");
-	}
-#endif
-
 }
 
-#ifdef RTL8192E
-
 /* PCI will not support workitem call back HW radio on-off control. */
 void dm_gpio_change_rf_callback(struct work_struct *work)
 {
@@ -2328,8 +2028,6 @@ void dm_gpio_change_rf_callback(struct work_struct *work)
 	}
 }
 
-#endif
-
 /* Check if Current RF RX path is enabled */
 void dm_rf_pathcheck_workitemcallback(struct work_struct *work)
 {
@@ -2655,11 +2353,7 @@ static void dm_init_fsync (struct net_device *dev)
 	priv->ieee80211->fsync_time_interval = 500;
 	priv->ieee80211->fsync_rate_bitmap = 0x0f000800;
 	priv->ieee80211->fsync_rssi_threshold = 30;
-#ifdef RTL8190P
-	priv->ieee80211->bfsync_enable = true;
-#else
 	priv->ieee80211->bfsync_enable = false;
-#endif
 	priv->ieee80211->fsync_multiple_timeinterval = 3;
 	priv->ieee80211->fsync_firstdiff_ratethreshold= 100;
 	priv->ieee80211->fsync_seconddiff_ratethreshold= 200;
@@ -2741,20 +2435,12 @@ void dm_fsync_timer_callback(unsigned long data)
 			priv->bswitch_fsync = !priv->bswitch_fsync;
 			if(priv->bswitch_fsync)
 			{
-			#ifdef RTL8190P
-				write_nic_byte(priv,0xC36, 0x00);
-			#else
 				write_nic_byte(priv,0xC36, 0x1c);
-			#endif
 				write_nic_byte(priv, 0xC3e, 0x90);
 			}
 			else
 			{
-			#ifdef RTL8190P
-				write_nic_byte(priv, 0xC36, 0x40);
-			#else
 				write_nic_byte(priv, 0xC36, 0x5c);
-			#endif
 				write_nic_byte(priv, 0xC3e, 0x96);
 			}
 		}
@@ -2763,11 +2449,7 @@ void dm_fsync_timer_callback(unsigned long data)
 			if(priv->bswitch_fsync)
 			{
 				priv->bswitch_fsync  = false;
-			#ifdef RTL8190P
-				write_nic_byte(priv, 0xC36, 0x40);
-			#else
 				write_nic_byte(priv, 0xC36, 0x5c);
-			#endif
 				write_nic_byte(priv, 0xC3e, 0x96);
 			}
 		}
@@ -2790,19 +2472,11 @@ void dm_fsync_timer_callback(unsigned long data)
 		if(priv->bswitch_fsync)
 		{
 			priv->bswitch_fsync  = false;
-		#ifdef RTL8190P
-			write_nic_byte(priv, 0xC36, 0x40);
-		#else
 			write_nic_byte(priv, 0xC36, 0x5c);
-		#endif
 			write_nic_byte(priv, 0xC3e, 0x96);
 		}
 		priv->ContiuneDiffCount = 0;
-	#ifdef RTL8190P
-		write_nic_dword(priv, rOFDM0_RxDetector2, 0x164052cd);
-	#else
 		write_nic_dword(priv, rOFDM0_RxDetector2, 0x465c52cd);
-	#endif
 	}
 	RT_TRACE(COMP_HALDM, "ContiuneDiffCount %d\n", priv->ContiuneDiffCount);
 	RT_TRACE(COMP_HALDM, "rateRecord %d rateCount %d, rateCountdiff %d bSwitchFsync %d\n", priv->rate_record, rate_count, rate_count_diff , priv->bswitch_fsync);
@@ -2829,20 +2503,14 @@ static void dm_EndSWFsync(struct net_device *dev)
 	{
 		priv->bswitch_fsync  = false;
 
-		#ifdef RTL8190P
-			write_nic_byte(priv, 0xC36, 0x40);
-		#else
-		write_nic_byte(priv, 0xC36, 0x5c);
-#endif
+		write_nic_byte(priv, 0xC36, 0x40);
 
 		write_nic_byte(priv, 0xC3e, 0x96);
 	}
 
 	priv->ContiuneDiffCount = 0;
-#ifndef RTL8190P
-	write_nic_dword(priv, rOFDM0_RxDetector2, 0x465c52cd);
-#endif
 
+	write_nic_dword(priv, rOFDM0_RxDetector2, 0x465c52cd);
 }
 
 static void dm_StartSWFsync(struct net_device *dev)
@@ -2880,10 +2548,7 @@ static void dm_StartSWFsync(struct net_device *dev)
 	priv->fsync_timer.expires = jiffies + MSECS(priv->ieee80211->fsync_time_interval);
 	add_timer(&priv->fsync_timer);
 
-#ifndef RTL8190P
 	write_nic_dword(priv, rOFDM0_RxDetector2, 0x465c12cd);
-#endif
-
 }
 
 static void dm_EndHWFsync(struct net_device *dev)
@@ -2952,11 +2617,7 @@ void dm_check_fsync(struct net_device *dev)
 		{
 			if(reg_c38_State != RegC38_Fsync_AP_BCM)
 			{	//For broadcom AP we write different default value
-				#ifdef RTL8190P
-					write_nic_byte(priv, rOFDM0_RxDetector3, 0x15);
-				#else
-					write_nic_byte(priv, rOFDM0_RxDetector3, 0x95);
-				#endif
+				write_nic_byte(priv, rOFDM0_RxDetector3, 0x95);
 
 				reg_c38_State = RegC38_Fsync_AP_BCM;
 			}
@@ -2987,11 +2648,7 @@ void dm_check_fsync(struct net_device *dev)
 				{
 					if(reg_c38_State != RegC38_NonFsync_Other_AP)
 					{
-						#ifdef RTL8190P
-							write_nic_byte(priv, rOFDM0_RxDetector3, 0x10);
-						#else
-							write_nic_byte(priv, rOFDM0_RxDetector3, 0x90);
-						#endif
+						write_nic_byte(priv, rOFDM0_RxDetector3, 0x90);
 
 						reg_c38_State = RegC38_NonFsync_Other_AP;
 					}

drivers/staging/rtl8192e/r8192E_hw.h

@@ -95,27 +95,13 @@ typedef enum _RT_RF_TYPE_819xU{
 #define EEPROM_Default_TxPower			0x1010
 #define EEPROM_ICVersion_ChannelPlan	0x7C	//0x7C:ChannelPlan, 0x7D:IC_Version
 #define EEPROM_Customer_ID			0x7B	//0x7B:CustomerID
-#ifdef RTL8190P
-#define EEPROM_RFInd_PowerDiff			0x14
-#define EEPROM_ThermalMeter			0x15
-#define EEPROM_TxPwDiff_CrystalCap		0x16
-#define EEPROM_TxPwIndex_CCK			0x18	//0x18~0x25
-#define EEPROM_TxPwIndex_OFDM_24G	0x26	//0x26~0x33
-#define EEPROM_TxPwIndex_OFDM_5G		0x34	//0x34~0x7B
-#define EEPROM_C56_CrystalCap			0x17	//0x17
-#define EEPROM_C56_RfA_CCK_Chnl1_TxPwIndex	0x80	//0x80
-#define EEPROM_C56_RfA_HT_OFDM_TxPwIndex	0x81	//0x81~0x83
-#define EEPROM_C56_RfC_CCK_Chnl1_TxPwIndex	0xbc	//0xb8
-#define EEPROM_C56_RfC_HT_OFDM_TxPwIndex	0xb9	//0xb9~0xbb
-#else
-#ifdef RTL8192E
+
 #define EEPROM_RFInd_PowerDiff			0x28
 #define EEPROM_ThermalMeter			0x29
 #define EEPROM_TxPwDiff_CrystalCap		0x2A	//0x2A~0x2B
 #define EEPROM_TxPwIndex_CCK			0x2C	//0x23
 #define EEPROM_TxPwIndex_OFDM_24G	0x3A	//0x24~0x26
-#endif
-#endif
+
 #define EEPROM_Default_TxPowerLevel		0x10
 //#define EEPROM_ChannelPlan			0x7c	//0x7C
 #define EEPROM_IC_VER				0x7d	//0x7D

drivers/staging/rtl8192e/r8192_pm.c

@@ -25,9 +25,6 @@ int rtl8192E_suspend (struct pci_dev *pdev, pm_message_t state)
 {
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct r8192_priv *priv = ieee80211_priv(dev);
-#ifdef RTL8190P
-	u8	ucRegRead;
-#endif
 	u32	ulRegRead;
 
         RT_TRACE(COMP_POWER, "============> r8192E suspend call.\n");
@@ -49,12 +46,6 @@ int rtl8192E_suspend (struct pci_dev *pdev, pm_message_t state)
 		write_nic_dword(priv, WFCRC0, 0xffffffff);
 		write_nic_dword(priv, WFCRC1, 0xffffffff);
 		write_nic_dword(priv, WFCRC2, 0xffffffff);
-#ifdef RTL8190P
-		//GPIO 0 = TRUE
-		ucRegRead = read_nic_byte(priv, GPO);
-		ucRegRead |= BIT0;
-		write_nic_byte(priv, GPO, ucRegRead);
-#endif
 		//Write PMR register
 		write_nic_byte(priv, PMR, 0x5);
 		//Disable tx, enanble rx

drivers/staging/rtl8192e/r819xE_cmdpkt.c

@@ -40,9 +40,6 @@ RT_STATUS cmpk_message_handle_tx(
 {
 
 	RT_STATUS 	    rt_status = RT_STATUS_SUCCESS;
-#ifdef RTL8192U
-	return rt_status;
-#else
 	struct r8192_priv   *priv = ieee80211_priv(dev);
 	u16		    frag_threshold;
 	u16		    frag_length = 0, frag_offset = 0;
@@ -74,11 +71,7 @@ RT_STATUS cmpk_message_handle_tx(
             /* Allocate skb buffer to contain firmware info and tx descriptor info
              * add 4 to avoid packet appending overflow.
              * */
-#ifdef RTL8192U
-            skb  = dev_alloc_skb(USB_HWDESC_HEADER_LEN + frag_length + 4);
-#else
             skb  = dev_alloc_skb(frag_length + priv->ieee80211->tx_headroom + 4);
-#endif
             if(skb == NULL) {
                 rt_status = RT_STATUS_FAILURE;
                 goto Failed;
@@ -91,10 +84,6 @@ RT_STATUS cmpk_message_handle_tx(
             tcb_desc->bLastIniPkt = bLastIniPkt;
             tcb_desc->pkt_size = frag_length;
 
-#ifdef RTL8192U
-            skb_reserve(skb, USB_HWDESC_HEADER_LEN);
-#endif
-
             //seg_ptr = skb_put(skb, frag_length + priv->ieee80211->tx_headroom);
             seg_ptr = skb_put(skb, priv->ieee80211->tx_headroom);
 
@@ -126,9 +115,6 @@ RT_STATUS cmpk_message_handle_tx(
 Failed:
 	//spin_unlock_irqrestore(&priv->tx_lock,flags);
 	return rt_status;
-
-
-#endif
 }
 
 static void

drivers/staging/rtl8192e/r819xE_phy.h

@@ -6,25 +6,6 @@
 #define MAX_RFDEPENDCMD_CNT 16
 #define MAX_POSTCMD_CNT 16
 
-#ifdef RTL8190P
-#define MACPHY_Array_PGLength 21
-#define Rtl819XMACPHY_Array_PG Rtl8190PciMACPHY_Array_PG
-#define Rtl819XMACPHY_Array Rtl8190PciMACPHY_Array
-#define RadioC_ArrayLength 246
-#define RadioD_ArrayLength 78
-#define Rtl819XRadioA_Array Rtl8190PciRadioA_Array
-#define Rtl819XRadioB_Array Rtl8190PciRadioB_Array
-#define Rtl819XRadioC_Array Rtl8190PciRadioC_Array
-#define Rtl819XRadioD_Array Rtl8190PciRadioD_Array
-#define Rtl819XAGCTAB_Array Rtl8190PciAGCTAB_Array
-#define PHY_REGArrayLength 280
-#define Rtl819XPHY_REGArray Rtl8190PciPHY_REGArray
-#define PHY_REG_1T2RArrayLength 280
-#define Rtl819XPHY_REG_1T2RArray Rtl8190PciPHY_REG_1T2RArray
-#endif
-
-
-#ifdef RTL8192E
 #define MACPHY_Array_PGLength 30
 #define Rtl819XMACPHY_Array_PG Rtl8192PciEMACPHY_Array_PG
 #define Rtl819XMACPHY_Array Rtl8192PciEMACPHY_Array
@@ -39,7 +20,6 @@
 #define Rtl819XPHY_REGArray Rtl8192PciEPHY_REGArray
 #define PHY_REG_1T2RArrayLength 296
 #define Rtl819XPHY_REG_1T2RArray Rtl8192PciEPHY_REG_1T2RArray
-#endif
 
 #define AGCTAB_ArrayLength 384
 #define MACPHY_ArrayLength 18