|
|
@@ -0,0 +1,789 @@
|
|
|
+/*
|
|
|
+ * wm97xx-core.c -- Touch screen driver core for Wolfson WM9705, WM9712
|
|
|
+ * and WM9713 AC97 Codecs.
|
|
|
+ *
|
|
|
+ * Copyright 2003, 2004, 2005, 2006, 2007, 2008 Wolfson Microelectronics PLC.
|
|
|
+ * Author: Liam Girdwood
|
|
|
+ * liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
|
|
|
+ * Parts Copyright : Ian Molton <spyro@f2s.com>
|
|
|
+ * Andrew Zabolotny <zap@homelink.ru>
|
|
|
+ * Russell King <rmk@arm.linux.org.uk>
|
|
|
+ *
|
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
|
+ * under the terms of the GNU General Public License as published by the
|
|
|
+ * Free Software Foundation; either version 2 of the License, or (at your
|
|
|
+ * option) any later version.
|
|
|
+ *
|
|
|
+ * Notes:
|
|
|
+ *
|
|
|
+ * Features:
|
|
|
+ * - supports WM9705, WM9712, WM9713
|
|
|
+ * - polling mode
|
|
|
+ * - continuous mode (arch-dependent)
|
|
|
+ * - adjustable rpu/dpp settings
|
|
|
+ * - adjustable pressure current
|
|
|
+ * - adjustable sample settle delay
|
|
|
+ * - 4 and 5 wire touchscreens (5 wire is WM9712 only)
|
|
|
+ * - pen down detection
|
|
|
+ * - battery monitor
|
|
|
+ * - sample AUX adcs
|
|
|
+ * - power management
|
|
|
+ * - codec GPIO
|
|
|
+ * - codec event notification
|
|
|
+ * Todo
|
|
|
+ * - Support for async sampling control for noisy LCDs.
|
|
|
+ *
|
|
|
+ */
|
|
|
+
|
|
|
+#include <linux/module.h>
|
|
|
+#include <linux/moduleparam.h>
|
|
|
+#include <linux/version.h>
|
|
|
+#include <linux/kernel.h>
|
|
|
+#include <linux/init.h>
|
|
|
+#include <linux/delay.h>
|
|
|
+#include <linux/string.h>
|
|
|
+#include <linux/proc_fs.h>
|
|
|
+#include <linux/pm.h>
|
|
|
+#include <linux/interrupt.h>
|
|
|
+#include <linux/bitops.h>
|
|
|
+#include <linux/workqueue.h>
|
|
|
+#include <linux/wm97xx.h>
|
|
|
+#include <linux/uaccess.h>
|
|
|
+#include <linux/io.h>
|
|
|
+
|
|
|
+#define TS_NAME "wm97xx"
|
|
|
+#define WM_CORE_VERSION "1.00"
|
|
|
+#define DEFAULT_PRESSURE 0xb0c0
|
|
|
+
|
|
|
+
|
|
|
+/*
|
|
|
+ * Touchscreen absolute values
|
|
|
+ *
|
|
|
+ * These parameters are used to help the input layer discard out of
|
|
|
+ * range readings and reduce jitter etc.
|
|
|
+ *
|
|
|
+ * o min, max:- indicate the min and max values your touch screen returns
|
|
|
+ * o fuzz:- use a higher number to reduce jitter
|
|
|
+ *
|
|
|
+ * The default values correspond to Mainstone II in QVGA mode
|
|
|
+ *
|
|
|
+ * Please read
|
|
|
+ * Documentation/input/input-programming.txt for more details.
|
|
|
+ */
|
|
|
+
|
|
|
+static int abs_x[3] = {350, 3900, 5};
|
|
|
+module_param_array(abs_x, int, NULL, 0);
|
|
|
+MODULE_PARM_DESC(abs_x, "Touchscreen absolute X min, max, fuzz");
|
|
|
+
|
|
|
+static int abs_y[3] = {320, 3750, 40};
|
|
|
+module_param_array(abs_y, int, NULL, 0);
|
|
|
+MODULE_PARM_DESC(abs_y, "Touchscreen absolute Y min, max, fuzz");
|
|
|
+
|
|
|
+static int abs_p[3] = {0, 150, 4};
|
|
|
+module_param_array(abs_p, int, NULL, 0);
|
|
|
+MODULE_PARM_DESC(abs_p, "Touchscreen absolute Pressure min, max, fuzz");
|
|
|
+
|
|
|
+/*
|
|
|
+ * wm97xx IO access, all IO locking done by AC97 layer
|
|
|
+ */
|
|
|
+int wm97xx_reg_read(struct wm97xx *wm, u16 reg)
|
|
|
+{
|
|
|
+ if (wm->ac97)
|
|
|
+ return wm->ac97->bus->ops->read(wm->ac97, reg);
|
|
|
+ else
|
|
|
+ return -1;
|
|
|
+}
|
|
|
+EXPORT_SYMBOL_GPL(wm97xx_reg_read);
|
|
|
+
|
|
|
+void wm97xx_reg_write(struct wm97xx *wm, u16 reg, u16 val)
|
|
|
+{
|
|
|
+ /* cache digitiser registers */
|
|
|
+ if (reg >= AC97_WM9713_DIG1 && reg <= AC97_WM9713_DIG3)
|
|
|
+ wm->dig[(reg - AC97_WM9713_DIG1) >> 1] = val;
|
|
|
+
|
|
|
+ /* cache gpio regs */
|
|
|
+ if (reg >= AC97_GPIO_CFG && reg <= AC97_MISC_AFE)
|
|
|
+ wm->gpio[(reg - AC97_GPIO_CFG) >> 1] = val;
|
|
|
+
|
|
|
+ /* wm9713 irq reg */
|
|
|
+ if (reg == 0x5a)
|
|
|
+ wm->misc = val;
|
|
|
+
|
|
|
+ if (wm->ac97)
|
|
|
+ wm->ac97->bus->ops->write(wm->ac97, reg, val);
|
|
|
+}
|
|
|
+EXPORT_SYMBOL_GPL(wm97xx_reg_write);
|
|
|
+
|
|
|
+/**
|
|
|
+ * wm97xx_read_aux_adc - Read the aux adc.
|
|
|
+ * @wm: wm97xx device.
|
|
|
+ * @adcsel: codec ADC to be read
|
|
|
+ *
|
|
|
+ * Reads the selected AUX ADC.
|
|
|
+ */
|
|
|
+
|
|
|
+int wm97xx_read_aux_adc(struct wm97xx *wm, u16 adcsel)
|
|
|
+{
|
|
|
+ int power_adc = 0, auxval;
|
|
|
+ u16 power = 0;
|
|
|
+
|
|
|
+ /* get codec */
|
|
|
+ mutex_lock(&wm->codec_mutex);
|
|
|
+
|
|
|
+ /* When the touchscreen is not in use, we may have to power up
|
|
|
+ * the AUX ADC before we can use sample the AUX inputs->
|
|
|
+ */
|
|
|
+ if (wm->id == WM9713_ID2 &&
|
|
|
+ (power = wm97xx_reg_read(wm, AC97_EXTENDED_MID)) & 0x8000) {
|
|
|
+ power_adc = 1;
|
|
|
+ wm97xx_reg_write(wm, AC97_EXTENDED_MID, power & 0x7fff);
|
|
|
+ }
|
|
|
+
|
|
|
+ /* Prepare the codec for AUX reading */
|
|
|
+ wm->codec->aux_prepare(wm);
|
|
|
+
|
|
|
+ /* Turn polling mode on to read AUX ADC */
|
|
|
+ wm->pen_probably_down = 1;
|
|
|
+ wm->codec->poll_sample(wm, adcsel, &auxval);
|
|
|
+
|
|
|
+ if (power_adc)
|
|
|
+ wm97xx_reg_write(wm, AC97_EXTENDED_MID, power | 0x8000);
|
|
|
+
|
|
|
+ wm->codec->dig_restore(wm);
|
|
|
+
|
|
|
+ wm->pen_probably_down = 0;
|
|
|
+
|
|
|
+ mutex_unlock(&wm->codec_mutex);
|
|
|
+ return auxval & 0xfff;
|
|
|
+}
|
|
|
+EXPORT_SYMBOL_GPL(wm97xx_read_aux_adc);
|
|
|
+
|
|
|
+/**
|
|
|
+ * wm97xx_get_gpio - Get the status of a codec GPIO.
|
|
|
+ * @wm: wm97xx device.
|
|
|
+ * @gpio: gpio
|
|
|
+ *
|
|
|
+ * Get the status of a codec GPIO pin
|
|
|
+ */
|
|
|
+
|
|
|
+enum wm97xx_gpio_status wm97xx_get_gpio(struct wm97xx *wm, u32 gpio)
|
|
|
+{
|
|
|
+ u16 status;
|
|
|
+ enum wm97xx_gpio_status ret;
|
|
|
+
|
|
|
+ mutex_lock(&wm->codec_mutex);
|
|
|
+ status = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
|
|
|
+
|
|
|
+ if (status & gpio)
|
|
|
+ ret = WM97XX_GPIO_HIGH;
|
|
|
+ else
|
|
|
+ ret = WM97XX_GPIO_LOW;
|
|
|
+
|
|
|
+ mutex_unlock(&wm->codec_mutex);
|
|
|
+ return ret;
|
|
|
+}
|
|
|
+EXPORT_SYMBOL_GPL(wm97xx_get_gpio);
|
|
|
+
|
|
|
+/**
|
|
|
+ * wm97xx_set_gpio - Set the status of a codec GPIO.
|
|
|
+ * @wm: wm97xx device.
|
|
|
+ * @gpio: gpio
|
|
|
+ *
|
|
|
+ *
|
|
|
+ * Set the status of a codec GPIO pin
|
|
|
+ */
|
|
|
+
|
|
|
+void wm97xx_set_gpio(struct wm97xx *wm, u32 gpio,
|
|
|
+ enum wm97xx_gpio_status status)
|
|
|
+{
|
|
|
+ u16 reg;
|
|
|
+
|
|
|
+ mutex_lock(&wm->codec_mutex);
|
|
|
+ reg = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
|
|
|
+
|
|
|
+ if (status & WM97XX_GPIO_HIGH)
|
|
|
+ reg |= gpio;
|
|
|
+ else
|
|
|
+ reg &= ~gpio;
|
|
|
+
|
|
|
+ if (wm->id == WM9712_ID2)
|
|
|
+ wm97xx_reg_write(wm, AC97_GPIO_STATUS, reg << 1);
|
|
|
+ else
|
|
|
+ wm97xx_reg_write(wm, AC97_GPIO_STATUS, reg);
|
|
|
+ mutex_unlock(&wm->codec_mutex);
|
|
|
+}
|
|
|
+EXPORT_SYMBOL_GPL(wm97xx_set_gpio);
|
|
|
+
|
|
|
+/*
|
|
|
+ * Codec GPIO pin configuration, this sets pin direction, polarity,
|
|
|
+ * stickyness and wake up.
|
|
|
+ */
|
|
|
+void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio, enum wm97xx_gpio_dir dir,
|
|
|
+ enum wm97xx_gpio_pol pol, enum wm97xx_gpio_sticky sticky,
|
|
|
+ enum wm97xx_gpio_wake wake)
|
|
|
+{
|
|
|
+ u16 reg;
|
|
|
+
|
|
|
+ mutex_lock(&wm->codec_mutex);
|
|
|
+ reg = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
|
|
|
+
|
|
|
+ if (pol == WM97XX_GPIO_POL_HIGH)
|
|
|
+ reg |= gpio;
|
|
|
+ else
|
|
|
+ reg &= ~gpio;
|
|
|
+
|
|
|
+ wm97xx_reg_write(wm, AC97_GPIO_POLARITY, reg);
|
|
|
+ reg = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
|
|
|
+
|
|
|
+ if (sticky == WM97XX_GPIO_STICKY)
|
|
|
+ reg |= gpio;
|
|
|
+ else
|
|
|
+ reg &= ~gpio;
|
|
|
+
|
|
|
+ wm97xx_reg_write(wm, AC97_GPIO_STICKY, reg);
|
|
|
+ reg = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
|
|
|
+
|
|
|
+ if (wake == WM97XX_GPIO_WAKE)
|
|
|
+ reg |= gpio;
|
|
|
+ else
|
|
|
+ reg &= ~gpio;
|
|
|
+
|
|
|
+ wm97xx_reg_write(wm, AC97_GPIO_WAKEUP, reg);
|
|
|
+ reg = wm97xx_reg_read(wm, AC97_GPIO_CFG);
|
|
|
+
|
|
|
+ if (dir == WM97XX_GPIO_IN)
|
|
|
+ reg |= gpio;
|
|
|
+ else
|
|
|
+ reg &= ~gpio;
|
|
|
+
|
|
|
+ wm97xx_reg_write(wm, AC97_GPIO_CFG, reg);
|
|
|
+ mutex_unlock(&wm->codec_mutex);
|
|
|
+}
|
|
|
+EXPORT_SYMBOL_GPL(wm97xx_config_gpio);
|
|
|
+
|
|
|
+/*
|
|
|
+ * Handle a pen down interrupt.
|
|
|
+ */
|
|
|
+static void wm97xx_pen_irq_worker(struct work_struct *work)
|
|
|
+{
|
|
|
+ struct wm97xx *wm = container_of(work, struct wm97xx, pen_event_work);
|
|
|
+ int pen_was_down = wm->pen_is_down;
|
|
|
+
|
|
|
+ /* do we need to enable the touch panel reader */
|
|
|
+ if (wm->id == WM9705_ID2) {
|
|
|
+ if (wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD) &
|
|
|
+ WM97XX_PEN_DOWN)
|
|
|
+ wm->pen_is_down = 1;
|
|
|
+ else
|
|
|
+ wm->pen_is_down = 0;
|
|
|
+ } else {
|
|
|
+ u16 status, pol;
|
|
|
+ mutex_lock(&wm->codec_mutex);
|
|
|
+ status = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
|
|
|
+ pol = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
|
|
|
+
|
|
|
+ if (WM97XX_GPIO_13 & pol & status) {
|
|
|
+ wm->pen_is_down = 1;
|
|
|
+ wm97xx_reg_write(wm, AC97_GPIO_POLARITY, pol &
|
|
|
+ ~WM97XX_GPIO_13);
|
|
|
+ } else {
|
|
|
+ wm->pen_is_down = 0;
|
|
|
+ wm97xx_reg_write(wm, AC97_GPIO_POLARITY, pol |
|
|
|
+ WM97XX_GPIO_13);
|
|
|
+ }
|
|
|
+
|
|
|
+ if (wm->id == WM9712_ID2)
|
|
|
+ wm97xx_reg_write(wm, AC97_GPIO_STATUS, (status &
|
|
|
+ ~WM97XX_GPIO_13) << 1);
|
|
|
+ else
|
|
|
+ wm97xx_reg_write(wm, AC97_GPIO_STATUS, status &
|
|
|
+ ~WM97XX_GPIO_13);
|
|
|
+ mutex_unlock(&wm->codec_mutex);
|
|
|
+ }
|
|
|
+
|
|
|
+ /* If the system is not using continuous mode or it provides a
|
|
|
+ * pen down operation then we need to schedule polls while the
|
|
|
+ * pen is down. Otherwise the machine driver is responsible
|
|
|
+ * for scheduling reads.
|
|
|
+ */
|
|
|
+ if (!wm->mach_ops->acc_enabled || wm->mach_ops->acc_pen_down) {
|
|
|
+ if (wm->pen_is_down && !pen_was_down) {
|
|
|
+ /* Data is not availiable immediately on pen down */
|
|
|
+ queue_delayed_work(wm->ts_workq, &wm->ts_reader, 1);
|
|
|
+ }
|
|
|
+
|
|
|
+ /* Let ts_reader report the pen up for debounce. */
|
|
|
+ if (!wm->pen_is_down && pen_was_down)
|
|
|
+ wm->pen_is_down = 1;
|
|
|
+ }
|
|
|
+
|
|
|
+ if (!wm->pen_is_down && wm->mach_ops->acc_enabled)
|
|
|
+ wm->mach_ops->acc_pen_up(wm);
|
|
|
+
|
|
|
+ wm->mach_ops->irq_enable(wm, 1);
|
|
|
+}
|
|
|
+
|
|
|
+/*
|
|
|
+ * Codec PENDOWN irq handler
|
|
|
+ *
|
|
|
+ * We have to disable the codec interrupt in the handler because it
|
|
|
+ * can take upto 1ms to clear the interrupt source. We schedule a task
|
|
|
+ * in a work queue to do the actual interaction with the chip (it
|
|
|
+ * doesn't matter if we end up reenqueing it before it is executed
|
|
|
+ * since we don't touch the chip until it has run). The interrupt is
|
|
|
+ * then enabled again in the slow handler when the source has been
|
|
|
+ * cleared.
|
|
|
+ */
|
|
|
+static irqreturn_t wm97xx_pen_interrupt(int irq, void *dev_id)
|
|
|
+{
|
|
|
+ struct wm97xx *wm = dev_id;
|
|
|
+
|
|
|
+ wm->mach_ops->irq_enable(wm, 0);
|
|
|
+ queue_work(wm->ts_workq, &wm->pen_event_work);
|
|
|
+
|
|
|
+ return IRQ_HANDLED;
|
|
|
+}
|
|
|
+
|
|
|
+/*
|
|
|
+ * initialise pen IRQ handler and workqueue
|
|
|
+ */
|
|
|
+static int wm97xx_init_pen_irq(struct wm97xx *wm)
|
|
|
+{
|
|
|
+ u16 reg;
|
|
|
+
|
|
|
+ /* If an interrupt is supplied an IRQ enable operation must also be
|
|
|
+ * provided. */
|
|
|
+ BUG_ON(!wm->mach_ops->irq_enable);
|
|
|
+
|
|
|
+ if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED,
|
|
|
+ "wm97xx-pen", wm)) {
|
|
|
+ dev_err(wm->dev,
|
|
|
+ "Failed to register pen down interrupt, polling");
|
|
|
+ wm->pen_irq = 0;
|
|
|
+ return -EINVAL;
|
|
|
+ }
|
|
|
+
|
|
|
+ /* Configure GPIO as interrupt source on WM971x */
|
|
|
+ if (wm->id != WM9705_ID2) {
|
|
|
+ BUG_ON(!wm->mach_ops->irq_gpio);
|
|
|
+ reg = wm97xx_reg_read(wm, AC97_MISC_AFE);
|
|
|
+ wm97xx_reg_write(wm, AC97_MISC_AFE,
|
|
|
+ reg & ~(wm->mach_ops->irq_gpio));
|
|
|
+ reg = wm97xx_reg_read(wm, 0x5a);
|
|
|
+ wm97xx_reg_write(wm, 0x5a, reg & ~0x0001);
|
|
|
+ }
|
|
|
+
|
|
|
+ return 0;
|
|
|
+}
|
|
|
+
|
|
|
+static int wm97xx_read_samples(struct wm97xx *wm)
|
|
|
+{
|
|
|
+ struct wm97xx_data data;
|
|
|
+ int rc;
|
|
|
+
|
|
|
+ mutex_lock(&wm->codec_mutex);
|
|
|
+
|
|
|
+ if (wm->mach_ops && wm->mach_ops->acc_enabled)
|
|
|
+ rc = wm->mach_ops->acc_pen_down(wm);
|
|
|
+ else
|
|
|
+ rc = wm->codec->poll_touch(wm, &data);
|
|
|
+
|
|
|
+ if (rc & RC_PENUP) {
|
|
|
+ if (wm->pen_is_down) {
|
|
|
+ wm->pen_is_down = 0;
|
|
|
+ dev_dbg(wm->dev, "pen up\n");
|
|
|
+ input_report_abs(wm->input_dev, ABS_PRESSURE, 0);
|
|
|
+ input_sync(wm->input_dev);
|
|
|
+ } else if (!(rc & RC_AGAIN)) {
|
|
|
+ /* We need high frequency updates only while
|
|
|
+ * pen is down, the user never will be able to
|
|
|
+ * touch screen faster than a few times per
|
|
|
+ * second... On the other hand, when the user
|
|
|
+ * is actively working with the touchscreen we
|
|
|
+ * don't want to lose the quick response. So we
|
|
|
+ * will slowly increase sleep time after the
|
|
|
+ * pen is up and quicky restore it to ~one task
|
|
|
+ * switch when pen is down again.
|
|
|
+ */
|
|
|
+ if (wm->ts_reader_interval < HZ / 10)
|
|
|
+ wm->ts_reader_interval++;
|
|
|
+ }
|
|
|
+
|
|
|
+ } else if (rc & RC_VALID) {
|
|
|
+ dev_dbg(wm->dev,
|
|
|
+ "pen down: x=%x:%d, y=%x:%d, pressure=%x:%d\n",
|
|
|
+ data.x >> 12, data.x & 0xfff, data.y >> 12,
|
|
|
+ data.y & 0xfff, data.p >> 12, data.p & 0xfff);
|
|
|
+ input_report_abs(wm->input_dev, ABS_X, data.x & 0xfff);
|
|
|
+ input_report_abs(wm->input_dev, ABS_Y, data.y & 0xfff);
|
|
|
+ input_report_abs(wm->input_dev, ABS_PRESSURE, data.p & 0xfff);
|
|
|
+ input_sync(wm->input_dev);
|
|
|
+ wm->pen_is_down = 1;
|
|
|
+ wm->ts_reader_interval = wm->ts_reader_min_interval;
|
|
|
+ } else if (rc & RC_PENDOWN) {
|
|
|
+ dev_dbg(wm->dev, "pen down\n");
|
|
|
+ wm->pen_is_down = 1;
|
|
|
+ wm->ts_reader_interval = wm->ts_reader_min_interval;
|
|
|
+ }
|
|
|
+
|
|
|
+ mutex_unlock(&wm->codec_mutex);
|
|
|
+ return rc;
|
|
|
+}
|
|
|
+
|
|
|
+/*
|
|
|
+* The touchscreen sample reader.
|
|
|
+*/
|
|
|
+static void wm97xx_ts_reader(struct work_struct *work)
|
|
|
+{
|
|
|
+ int rc;
|
|
|
+ struct wm97xx *wm = container_of(work, struct wm97xx, ts_reader.work);
|
|
|
+
|
|
|
+ BUG_ON(!wm->codec);
|
|
|
+
|
|
|
+ do {
|
|
|
+ rc = wm97xx_read_samples(wm);
|
|
|
+ } while (rc & RC_AGAIN);
|
|
|
+
|
|
|
+ if (wm->pen_is_down || !wm->pen_irq)
|
|
|
+ queue_delayed_work(wm->ts_workq, &wm->ts_reader,
|
|
|
+ wm->ts_reader_interval);
|
|
|
+}
|
|
|
+
|
|
|
+/**
|
|
|
+ * wm97xx_ts_input_open - Open the touch screen input device.
|
|
|
+ * @idev: Input device to be opened.
|
|
|
+ *
|
|
|
+ * Called by the input sub system to open a wm97xx touchscreen device.
|
|
|
+ * Starts the touchscreen thread and touch digitiser.
|
|
|
+ */
|
|
|
+static int wm97xx_ts_input_open(struct input_dev *idev)
|
|
|
+{
|
|
|
+ struct wm97xx *wm = input_get_drvdata(idev);
|
|
|
+
|
|
|
+ wm->ts_workq = create_singlethread_workqueue("kwm97xx");
|
|
|
+ if (wm->ts_workq == NULL) {
|
|
|
+ dev_err(wm->dev,
|
|
|
+ "Failed to create workqueue\n");
|
|
|
+ return -EINVAL;
|
|
|
+ }
|
|
|
+
|
|
|
+ /* start digitiser */
|
|
|
+ if (wm->mach_ops && wm->mach_ops->acc_enabled)
|
|
|
+ wm->codec->acc_enable(wm, 1);
|
|
|
+ wm->codec->dig_enable(wm, 1);
|
|
|
+
|
|
|
+ INIT_DELAYED_WORK(&wm->ts_reader, wm97xx_ts_reader);
|
|
|
+ INIT_WORK(&wm->pen_event_work, wm97xx_pen_irq_worker);
|
|
|
+
|
|
|
+ wm->ts_reader_min_interval = HZ >= 100 ? HZ / 100 : 1;
|
|
|
+ if (wm->ts_reader_min_interval < 1)
|
|
|
+ wm->ts_reader_min_interval = 1;
|
|
|
+ wm->ts_reader_interval = wm->ts_reader_min_interval;
|
|
|
+
|
|
|
+ wm->pen_is_down = 0;
|
|
|
+ if (wm->pen_irq)
|
|
|
+ wm97xx_init_pen_irq(wm);
|
|
|
+ else
|
|
|
+ dev_err(wm->dev, "No IRQ specified\n");
|
|
|
+
|
|
|
+ /* If we either don't have an interrupt for pen down events or
|
|
|
+ * failed to acquire it then we need to poll.
|
|
|
+ */
|
|
|
+ if (wm->pen_irq == 0)
|
|
|
+ queue_delayed_work(wm->ts_workq, &wm->ts_reader,
|
|
|
+ wm->ts_reader_interval);
|
|
|
+
|
|
|
+ return 0;
|
|
|
+}
|
|
|
+
|
|
|
+/**
|
|
|
+ * wm97xx_ts_input_close - Close the touch screen input device.
|
|
|
+ * @idev: Input device to be closed.
|
|
|
+ *
|
|
|
+ * Called by the input sub system to close a wm97xx touchscreen
|
|
|
+ * device. Kills the touchscreen thread and stops the touch
|
|
|
+ * digitiser.
|
|
|
+ */
|
|
|
+
|
|
|
+static void wm97xx_ts_input_close(struct input_dev *idev)
|
|
|
+{
|
|
|
+ struct wm97xx *wm = input_get_drvdata(idev);
|
|
|
+ u16 reg;
|
|
|
+
|
|
|
+ if (wm->pen_irq) {
|
|
|
+ /* Return the interrupt to GPIO usage (disabling it) */
|
|
|
+ if (wm->id != WM9705_ID2) {
|
|
|
+ BUG_ON(!wm->mach_ops->irq_gpio);
|
|
|
+ reg = wm97xx_reg_read(wm, AC97_MISC_AFE);
|
|
|
+ wm97xx_reg_write(wm, AC97_MISC_AFE,
|
|
|
+ reg | wm->mach_ops->irq_gpio);
|
|
|
+ }
|
|
|
+
|
|
|
+ free_irq(wm->pen_irq, wm);
|
|
|
+ }
|
|
|
+
|
|
|
+ wm->pen_is_down = 0;
|
|
|
+
|
|
|
+ /* Balance out interrupt disables/enables */
|
|
|
+ if (cancel_work_sync(&wm->pen_event_work))
|
|
|
+ wm->mach_ops->irq_enable(wm, 1);
|
|
|
+
|
|
|
+ /* ts_reader rearms itself so we need to explicitly stop it
|
|
|
+ * before we destroy the workqueue.
|
|
|
+ */
|
|
|
+ cancel_delayed_work_sync(&wm->ts_reader);
|
|
|
+
|
|
|
+ destroy_workqueue(wm->ts_workq);
|
|
|
+
|
|
|
+ /* stop digitiser */
|
|
|
+ wm->codec->dig_enable(wm, 0);
|
|
|
+ if (wm->mach_ops && wm->mach_ops->acc_enabled)
|
|
|
+ wm->codec->acc_enable(wm, 0);
|
|
|
+}
|
|
|
+
|
|
|
+static int wm97xx_probe(struct device *dev)
|
|
|
+{
|
|
|
+ struct wm97xx *wm;
|
|
|
+ int ret = 0, id = 0;
|
|
|
+
|
|
|
+ wm = kzalloc(sizeof(struct wm97xx), GFP_KERNEL);
|
|
|
+ if (!wm)
|
|
|
+ return -ENOMEM;
|
|
|
+ mutex_init(&wm->codec_mutex);
|
|
|
+
|
|
|
+ wm->dev = dev;
|
|
|
+ dev->driver_data = wm;
|
|
|
+ wm->ac97 = to_ac97_t(dev);
|
|
|
+
|
|
|
+ /* check that we have a supported codec */
|
|
|
+ id = wm97xx_reg_read(wm, AC97_VENDOR_ID1);
|
|
|
+ if (id != WM97XX_ID1) {
|
|
|
+ dev_err(dev, "Device with vendor %04x is not a wm97xx\n", id);
|
|
|
+ ret = -ENODEV;
|
|
|
+ goto alloc_err;
|
|
|
+ }
|
|
|
+
|
|
|
+ wm->id = wm97xx_reg_read(wm, AC97_VENDOR_ID2);
|
|
|
+
|
|
|
+ dev_info(wm->dev, "detected a wm97%02x codec\n", wm->id & 0xff);
|
|
|
+
|
|
|
+ switch (wm->id & 0xff) {
|
|
|
+#ifdef CONFIG_TOUCHSCREEN_WM9705
|
|
|
+ case 0x05:
|
|
|
+ wm->codec = &wm9705_codec;
|
|
|
+ break;
|
|
|
+#endif
|
|
|
+#ifdef CONFIG_TOUCHSCREEN_WM9712
|
|
|
+ case 0x12:
|
|
|
+ wm->codec = &wm9712_codec;
|
|
|
+ break;
|
|
|
+#endif
|
|
|
+#ifdef CONFIG_TOUCHSCREEN_WM9713
|
|
|
+ case 0x13:
|
|
|
+ wm->codec = &wm9713_codec;
|
|
|
+ break;
|
|
|
+#endif
|
|
|
+ default:
|
|
|
+ dev_err(wm->dev, "Support for wm97%02x not compiled in.\n",
|
|
|
+ wm->id & 0xff);
|
|
|
+ ret = -ENODEV;
|
|
|
+ goto alloc_err;
|
|
|
+ }
|
|
|
+
|
|
|
+ wm->input_dev = input_allocate_device();
|
|
|
+ if (wm->input_dev == NULL) {
|
|
|
+ ret = -ENOMEM;
|
|
|
+ goto alloc_err;
|
|
|
+ }
|
|
|
+
|
|
|
+ /* set up touch configuration */
|
|
|
+ wm->input_dev->name = "wm97xx touchscreen";
|
|
|
+ wm->input_dev->open = wm97xx_ts_input_open;
|
|
|
+ wm->input_dev->close = wm97xx_ts_input_close;
|
|
|
+ set_bit(EV_ABS, wm->input_dev->evbit);
|
|
|
+ set_bit(ABS_X, wm->input_dev->absbit);
|
|
|
+ set_bit(ABS_Y, wm->input_dev->absbit);
|
|
|
+ set_bit(ABS_PRESSURE, wm->input_dev->absbit);
|
|
|
+ input_set_abs_params(wm->input_dev, ABS_X, abs_x[0], abs_x[1],
|
|
|
+ abs_x[2], 0);
|
|
|
+ input_set_abs_params(wm->input_dev, ABS_Y, abs_y[0], abs_y[1],
|
|
|
+ abs_y[2], 0);
|
|
|
+ input_set_abs_params(wm->input_dev, ABS_PRESSURE, abs_p[0], abs_p[1],
|
|
|
+ abs_p[2], 0);
|
|
|
+ input_set_drvdata(wm->input_dev, wm);
|
|
|
+ wm->input_dev->dev.parent = dev;
|
|
|
+ ret = input_register_device(wm->input_dev);
|
|
|
+ if (ret < 0)
|
|
|
+ goto dev_alloc_err;
|
|
|
+
|
|
|
+ /* set up physical characteristics */
|
|
|
+ wm->codec->phy_init(wm);
|
|
|
+
|
|
|
+ /* load gpio cache */
|
|
|
+ wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG);
|
|
|
+ wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
|
|
|
+ wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
|
|
|
+ wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
|
|
|
+ wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
|
|
|
+ wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);
|
|
|
+
|
|
|
+ /* register our battery device */
|
|
|
+ wm->battery_dev = platform_device_alloc("wm97xx-battery", -1);
|
|
|
+ if (!wm->battery_dev) {
|
|
|
+ ret = -ENOMEM;
|
|
|
+ goto batt_err;
|
|
|
+ }
|
|
|
+ platform_set_drvdata(wm->battery_dev, wm);
|
|
|
+ wm->battery_dev->dev.parent = dev;
|
|
|
+ ret = platform_device_add(wm->battery_dev);
|
|
|
+ if (ret < 0)
|
|
|
+ goto batt_reg_err;
|
|
|
+
|
|
|
+ /* register our extended touch device (for machine specific
|
|
|
+ * extensions) */
|
|
|
+ wm->touch_dev = platform_device_alloc("wm97xx-touch", -1);
|
|
|
+ if (!wm->touch_dev) {
|
|
|
+ ret = -ENOMEM;
|
|
|
+ goto touch_err;
|
|
|
+ }
|
|
|
+ platform_set_drvdata(wm->touch_dev, wm);
|
|
|
+ wm->touch_dev->dev.parent = dev;
|
|
|
+ ret = platform_device_add(wm->touch_dev);
|
|
|
+ if (ret < 0)
|
|
|
+ goto touch_reg_err;
|
|
|
+
|
|
|
+ return ret;
|
|
|
+
|
|
|
+ touch_reg_err:
|
|
|
+ platform_device_put(wm->touch_dev);
|
|
|
+ touch_err:
|
|
|
+ platform_device_unregister(wm->battery_dev);
|
|
|
+ wm->battery_dev = NULL;
|
|
|
+ batt_reg_err:
|
|
|
+ platform_device_put(wm->battery_dev);
|
|
|
+ batt_err:
|
|
|
+ input_unregister_device(wm->input_dev);
|
|
|
+ wm->input_dev = NULL;
|
|
|
+ dev_alloc_err:
|
|
|
+ input_free_device(wm->input_dev);
|
|
|
+ alloc_err:
|
|
|
+ kfree(wm);
|
|
|
+
|
|
|
+ return ret;
|
|
|
+}
|
|
|
+
|
|
|
+static int wm97xx_remove(struct device *dev)
|
|
|
+{
|
|
|
+ struct wm97xx *wm = dev_get_drvdata(dev);
|
|
|
+
|
|
|
+ platform_device_unregister(wm->battery_dev);
|
|
|
+ platform_device_unregister(wm->touch_dev);
|
|
|
+ input_unregister_device(wm->input_dev);
|
|
|
+ kfree(wm);
|
|
|
+
|
|
|
+ return 0;
|
|
|
+}
|
|
|
+
|
|
|
+#ifdef CONFIG_PM
|
|
|
+static int wm97xx_suspend(struct device *dev, pm_message_t state)
|
|
|
+{
|
|
|
+ struct wm97xx *wm = dev_get_drvdata(dev);
|
|
|
+
|
|
|
+ if (wm->input_dev->users)
|
|
|
+ cancel_delayed_work_sync(&wm->ts_reader);
|
|
|
+
|
|
|
+ return 0;
|
|
|
+}
|
|
|
+
|
|
|
+static int wm97xx_resume(struct device *dev)
|
|
|
+{
|
|
|
+ struct wm97xx *wm = dev_get_drvdata(dev);
|
|
|
+
|
|
|
+ /* restore digitiser and gpios */
|
|
|
+ if (wm->id == WM9713_ID2) {
|
|
|
+ wm97xx_reg_write(wm, AC97_WM9713_DIG1, wm->dig[0]);
|
|
|
+ wm97xx_reg_write(wm, 0x5a, wm->misc);
|
|
|
+ if (wm->input_dev->users) {
|
|
|
+ u16 reg;
|
|
|
+ reg = wm97xx_reg_read(wm, AC97_EXTENDED_MID) & 0x7fff;
|
|
|
+ wm97xx_reg_write(wm, AC97_EXTENDED_MID, reg);
|
|
|
+ }
|
|
|
+ }
|
|
|
+
|
|
|
+ wm97xx_reg_write(wm, AC97_WM9713_DIG2, wm->dig[1]);
|
|
|
+ wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig[2]);
|
|
|
+
|
|
|
+ wm97xx_reg_write(wm, AC97_GPIO_CFG, wm->gpio[0]);
|
|
|
+ wm97xx_reg_write(wm, AC97_GPIO_POLARITY, wm->gpio[1]);
|
|
|
+ wm97xx_reg_write(wm, AC97_GPIO_STICKY, wm->gpio[2]);
|
|
|
+ wm97xx_reg_write(wm, AC97_GPIO_WAKEUP, wm->gpio[3]);
|
|
|
+ wm97xx_reg_write(wm, AC97_GPIO_STATUS, wm->gpio[4]);
|
|
|
+ wm97xx_reg_write(wm, AC97_MISC_AFE, wm->gpio[5]);
|
|
|
+
|
|
|
+ if (wm->input_dev->users && !wm->pen_irq) {
|
|
|
+ wm->ts_reader_interval = wm->ts_reader_min_interval;
|
|
|
+ queue_delayed_work(wm->ts_workq, &wm->ts_reader,
|
|
|
+ wm->ts_reader_interval);
|
|
|
+ }
|
|
|
+
|
|
|
+ return 0;
|
|
|
+}
|
|
|
+
|
|
|
+#else
|
|
|
+#define wm97xx_suspend NULL
|
|
|
+#define wm97xx_resume NULL
|
|
|
+#endif
|
|
|
+
|
|
|
+/*
|
|
|
+ * Machine specific operations
|
|
|
+ */
|
|
|
+int wm97xx_register_mach_ops(struct wm97xx *wm,
|
|
|
+ struct wm97xx_mach_ops *mach_ops)
|
|
|
+{
|
|
|
+ mutex_lock(&wm->codec_mutex);
|
|
|
+ if (wm->mach_ops) {
|
|
|
+ mutex_unlock(&wm->codec_mutex);
|
|
|
+ return -EINVAL;
|
|
|
+ }
|
|
|
+ wm->mach_ops = mach_ops;
|
|
|
+ mutex_unlock(&wm->codec_mutex);
|
|
|
+
|
|
|
+ return 0;
|
|
|
+}
|
|
|
+EXPORT_SYMBOL_GPL(wm97xx_register_mach_ops);
|
|
|
+
|
|
|
+void wm97xx_unregister_mach_ops(struct wm97xx *wm)
|
|
|
+{
|
|
|
+ mutex_lock(&wm->codec_mutex);
|
|
|
+ wm->mach_ops = NULL;
|
|
|
+ mutex_unlock(&wm->codec_mutex);
|
|
|
+}
|
|
|
+EXPORT_SYMBOL_GPL(wm97xx_unregister_mach_ops);
|
|
|
+
|
|
|
+static struct device_driver wm97xx_driver = {
|
|
|
+ .name = "ac97",
|
|
|
+ .bus = &ac97_bus_type,
|
|
|
+ .owner = THIS_MODULE,
|
|
|
+ .probe = wm97xx_probe,
|
|
|
+ .remove = wm97xx_remove,
|
|
|
+ .suspend = wm97xx_suspend,
|
|
|
+ .resume = wm97xx_resume,
|
|
|
+};
|
|
|
+
|
|
|
+static int __init wm97xx_init(void)
|
|
|
+{
|
|
|
+ return driver_register(&wm97xx_driver);
|
|
|
+}
|
|
|
+
|
|
|
+static void __exit wm97xx_exit(void)
|
|
|
+{
|
|
|
+ driver_unregister(&wm97xx_driver);
|
|
|
+}
|
|
|
+
|
|
|
+module_init(wm97xx_init);
|
|
|
+module_exit(wm97xx_exit);
|
|
|
+
|
|
|
+/* Module information */
|
|
|
+MODULE_AUTHOR("Liam Girdwood <liam.girdwood@wolfsonmicro.com>");
|
|
|
+MODULE_DESCRIPTION("WM97xx Core - Touch Screen / AUX ADC / GPIO Driver");
|
|
|
+MODULE_LICENSE("GPL");
|
Dmitry Torokhov