V4L/DVB (8690): tuner-3036: remove driver

This driver is for VERY old i2c-over-parallel port teletext receiver
boxes. Rather then spending effort on converting this driver to V4L2,
and since it is extremely unlikely that anyone still uses one of these
devices, it was decided to drop it (after discussing this as well with
the original author, Phil Blundell).

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/Kconfig

@@ -579,13 +579,6 @@ config VIDEO_SAA5249
 	  To compile this driver as a module, choose M here: the
 	  module will be called saa5249.
 
-config TUNER_3036
-	tristate "SAB3036 tuner"
-	depends on I2C && VIDEO_V4L1
-	help
-	  Say Y here to include support for Philips SAB3036 compatible tuners.
-	  If in doubt, say N.
-
 config VIDEO_VINO
 	tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
 	depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2

drivers/media/video/Makefile

@@ -84,7 +84,6 @@ obj-$(CONFIG_VIDEO_CPIA2) += cpia2/
 obj-$(CONFIG_VIDEO_MXB) += mxb.o
 obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o
 obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o
-obj-$(CONFIG_TUNER_3036) += tuner-3036.o
 
 obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o
 obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o

drivers/media/video/tuner-3036.c

@@ -1,214 +0,0 @@
-/*
- * Driver for Philips SAB3036 "CITAC" tuner control chip.
- *
- * Author: Phil Blundell <philb@gnu.org>
- *
- * The SAB3036 is just about different enough from the chips that
- * tuner.c copes with to make it not worth the effort to crowbar
- * the support into that file.  So instead we have a separate driver.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-
-#include <linux/i2c.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-
-#include <media/tuner.h>
-
-static int debug;	/* insmod parameter */
-static int this_adap;
-
-static struct i2c_client client_template;
-
-/* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x60, 0x61, I2C_CLIENT_END };
-static unsigned short ignore = I2C_CLIENT_END;
-
-static struct i2c_client_address_data addr_data = {
-	.normal_i2c	= normal_i2c,
-	.probe		= &ignore,
-	.ignore		= &ignore,
-};
-
-/* ---------------------------------------------------------------------- */
-
-static unsigned char
-tuner_getstatus (struct i2c_client *c)
-{
-	unsigned char byte;
-	if (i2c_master_recv(c, &byte, 1) != 1)
-		printk(KERN_ERR "tuner-3036: I/O error.\n");
-	return byte;
-}
-
-#define TUNER_FL        0x80
-
-static int
-tuner_islocked (struct i2c_client *c)
-{
-	return (tuner_getstatus(c) & TUNER_FL);
-}
-
-/* ---------------------------------------------------------------------- */
-
-static void
-set_tv_freq(struct i2c_client *c, int freq)
-{
-	u16 div = ((freq * 20) / 16);
-	unsigned long give_up = jiffies + HZ;
-	unsigned char buffer[2];
-
-	if (debug)
-		printk(KERN_DEBUG "tuner: setting frequency %dMHz, divisor %x\n", freq / 16, div);
-
-	/* Select high tuning current */
-	buffer[0] = 0x29;
-	buffer[1] = 0x3e;
-
-	if (i2c_master_send(c, buffer, 2) != 2)
-		printk("tuner: i2c i/o error 1\n");
-
-	buffer[0] = 0x80 | ((div>>8) & 0x7f);
-	buffer[1] = div & 0xff;
-
-	if (i2c_master_send(c, buffer, 2) != 2)
-		printk("tuner: i2c i/o error 2\n");
-
-	while (!tuner_islocked(c) && time_before(jiffies, give_up))
-		schedule();
-
-	if (!tuner_islocked(c))
-		printk(KERN_WARNING "tuner: failed to achieve PLL lock\n");
-
-	/* Select low tuning current and engage AFC */
-	buffer[0] = 0x29;
-	buffer[1] = 0xb2;
-
-	if (i2c_master_send(c, buffer, 2) != 2)
-		printk("tuner: i2c i/o error 3\n");
-
-	if (debug)
-		printk(KERN_DEBUG "tuner: status %02x\n", tuner_getstatus(c));
-}
-
-/* ---------------------------------------------------------------------- */
-
-static int
-tuner_attach(struct i2c_adapter *adap, int addr, int kind)
-{
-	static unsigned char buffer[] = { 0x29, 0x32, 0x2a, 0, 0x2b, 0 };
-
-	struct i2c_client *client;
-
-	if (this_adap > 0)
-		return -1;
-	this_adap++;
-
-	client_template.adapter = adap;
-	client_template.addr = addr;
-
-	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == NULL)
-		return -ENOMEM;
-	memcpy(client, &client_template, sizeof(struct i2c_client));
-
-	printk("tuner: SAB3036 found, status %02x\n", tuner_getstatus(client));
-
-	i2c_attach_client(client);
-
-	if (i2c_master_send(client, buffer, 2) != 2)
-		printk("tuner: i2c i/o error 1\n");
-	if (i2c_master_send(client, buffer+2, 2) != 2)
-		printk("tuner: i2c i/o error 2\n");
-	if (i2c_master_send(client, buffer+4, 2) != 2)
-		printk("tuner: i2c i/o error 3\n");
-	return 0;
-}
-
-static int
-tuner_detach(struct i2c_client *c)
-{
-	return 0;
-}
-
-static int
-tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
-{
-	int *iarg = (int*)arg;
-
-	switch (cmd)
-	{
-		case VIDIOCSFREQ:
-			set_tv_freq(client, *iarg);
-			break;
-
-		default:
-			return -EINVAL;
-	}
-	return 0;
-}
-
-static int
-tuner_probe(struct i2c_adapter *adap)
-{
-	this_adap = 0;
-	if (adap->id == I2C_HW_B_LP)
-		return i2c_probe(adap, &addr_data, tuner_attach);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static struct i2c_driver
-i2c_driver_tuner =
-{
-	.driver = {
-		.name	=	"sab3036",
-	},
-	.id		=	I2C_DRIVERID_SAB3036,
-	.attach_adapter =	tuner_probe,
-	.detach_client  =	tuner_detach,
-	.command	=	tuner_command
-};
-
-static struct i2c_client client_template =
-{
-	.driver		= &i2c_driver_tuner,
-	.name		= "SAB3036",
-};
-
-static int __init
-tuner3036_init(void)
-{
-	return i2c_add_driver(&i2c_driver_tuner);
-}
-
-static void __exit
-tuner3036_exit(void)
-{
-	i2c_del_driver(&i2c_driver_tuner);
-}
-
-MODULE_DESCRIPTION("SAB3036 tuner driver");
-MODULE_AUTHOR("Philip Blundell <philb@gnu.org>");
-MODULE_LICENSE("GPL");
-
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug,"Enable debugging output");
-
-module_init(tuner3036_init);
-module_exit(tuner3036_exit);