|
@@ -1,8 +1,8 @@
|
|
/*
|
|
/*
|
|
* GPIO Chip driver for Analog Devices
|
|
* GPIO Chip driver for Analog Devices
|
|
- * ADP5588 I/O Expander and QWERTY Keypad Controller
|
|
|
|
|
|
+ * ADP5588/ADP5587 I/O Expander and QWERTY Keypad Controller
|
|
*
|
|
*
|
|
- * Copyright 2009 Analog Devices Inc.
|
|
|
|
|
|
+ * Copyright 2009-2010 Analog Devices Inc.
|
|
*
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
*/
|
|
@@ -13,21 +13,34 @@
|
|
#include <linux/init.h>
|
|
#include <linux/init.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/gpio.h>
|
|
|
|
+#include <linux/interrupt.h>
|
|
|
|
+#include <linux/irq.h>
|
|
|
|
|
|
#include <linux/i2c/adp5588.h>
|
|
#include <linux/i2c/adp5588.h>
|
|
|
|
|
|
-#define DRV_NAME "adp5588-gpio"
|
|
|
|
-#define MAXGPIO 18
|
|
|
|
-#define ADP_BANK(offs) ((offs) >> 3)
|
|
|
|
-#define ADP_BIT(offs) (1u << ((offs) & 0x7))
|
|
|
|
|
|
+#define DRV_NAME "adp5588-gpio"
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * Early pre 4.0 Silicon required to delay readout by at least 25ms,
|
|
|
|
+ * since the Event Counter Register updated 25ms after the interrupt
|
|
|
|
+ * asserted.
|
|
|
|
+ */
|
|
|
|
+#define WA_DELAYED_READOUT_REVID(rev) ((rev) < 4)
|
|
|
|
|
|
struct adp5588_gpio {
|
|
struct adp5588_gpio {
|
|
struct i2c_client *client;
|
|
struct i2c_client *client;
|
|
struct gpio_chip gpio_chip;
|
|
struct gpio_chip gpio_chip;
|
|
struct mutex lock; /* protect cached dir, dat_out */
|
|
struct mutex lock; /* protect cached dir, dat_out */
|
|
|
|
+ /* protect serialized access to the interrupt controller bus */
|
|
|
|
+ struct mutex irq_lock;
|
|
unsigned gpio_start;
|
|
unsigned gpio_start;
|
|
|
|
+ unsigned irq_base;
|
|
uint8_t dat_out[3];
|
|
uint8_t dat_out[3];
|
|
uint8_t dir[3];
|
|
uint8_t dir[3];
|
|
|
|
+ uint8_t int_lvl[3];
|
|
|
|
+ uint8_t int_en[3];
|
|
|
|
+ uint8_t irq_mask[3];
|
|
|
|
+ uint8_t irq_stat[3];
|
|
};
|
|
};
|
|
|
|
|
|
static int adp5588_gpio_read(struct i2c_client *client, u8 reg)
|
|
static int adp5588_gpio_read(struct i2c_client *client, u8 reg)
|
|
@@ -55,8 +68,8 @@ static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
|
|
struct adp5588_gpio *dev =
|
|
struct adp5588_gpio *dev =
|
|
container_of(chip, struct adp5588_gpio, gpio_chip);
|
|
container_of(chip, struct adp5588_gpio, gpio_chip);
|
|
|
|
|
|
- return !!(adp5588_gpio_read(dev->client, GPIO_DAT_STAT1 + ADP_BANK(off))
|
|
|
|
- & ADP_BIT(off));
|
|
|
|
|
|
+ return !!(adp5588_gpio_read(dev->client,
|
|
|
|
+ GPIO_DAT_STAT1 + ADP5588_BANK(off)) & ADP5588_BIT(off));
|
|
}
|
|
}
|
|
|
|
|
|
static void adp5588_gpio_set_value(struct gpio_chip *chip,
|
|
static void adp5588_gpio_set_value(struct gpio_chip *chip,
|
|
@@ -66,8 +79,8 @@ static void adp5588_gpio_set_value(struct gpio_chip *chip,
|
|
struct adp5588_gpio *dev =
|
|
struct adp5588_gpio *dev =
|
|
container_of(chip, struct adp5588_gpio, gpio_chip);
|
|
container_of(chip, struct adp5588_gpio, gpio_chip);
|
|
|
|
|
|
- bank = ADP_BANK(off);
|
|
|
|
- bit = ADP_BIT(off);
|
|
|
|
|
|
+ bank = ADP5588_BANK(off);
|
|
|
|
+ bit = ADP5588_BIT(off);
|
|
|
|
|
|
mutex_lock(&dev->lock);
|
|
mutex_lock(&dev->lock);
|
|
if (val)
|
|
if (val)
|
|
@@ -87,10 +100,10 @@ static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off)
|
|
struct adp5588_gpio *dev =
|
|
struct adp5588_gpio *dev =
|
|
container_of(chip, struct adp5588_gpio, gpio_chip);
|
|
container_of(chip, struct adp5588_gpio, gpio_chip);
|
|
|
|
|
|
- bank = ADP_BANK(off);
|
|
|
|
|
|
+ bank = ADP5588_BANK(off);
|
|
|
|
|
|
mutex_lock(&dev->lock);
|
|
mutex_lock(&dev->lock);
|
|
- dev->dir[bank] &= ~ADP_BIT(off);
|
|
|
|
|
|
+ dev->dir[bank] &= ~ADP5588_BIT(off);
|
|
ret = adp5588_gpio_write(dev->client, GPIO_DIR1 + bank, dev->dir[bank]);
|
|
ret = adp5588_gpio_write(dev->client, GPIO_DIR1 + bank, dev->dir[bank]);
|
|
mutex_unlock(&dev->lock);
|
|
mutex_unlock(&dev->lock);
|
|
|
|
|
|
@@ -105,8 +118,8 @@ static int adp5588_gpio_direction_output(struct gpio_chip *chip,
|
|
struct adp5588_gpio *dev =
|
|
struct adp5588_gpio *dev =
|
|
container_of(chip, struct adp5588_gpio, gpio_chip);
|
|
container_of(chip, struct adp5588_gpio, gpio_chip);
|
|
|
|
|
|
- bank = ADP_BANK(off);
|
|
|
|
- bit = ADP_BIT(off);
|
|
|
|
|
|
+ bank = ADP5588_BANK(off);
|
|
|
|
+ bit = ADP5588_BIT(off);
|
|
|
|
|
|
mutex_lock(&dev->lock);
|
|
mutex_lock(&dev->lock);
|
|
dev->dir[bank] |= bit;
|
|
dev->dir[bank] |= bit;
|
|
@@ -125,6 +138,213 @@ static int adp5588_gpio_direction_output(struct gpio_chip *chip,
|
|
return ret;
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
|
|
|
|
+#ifdef CONFIG_GPIO_ADP5588_IRQ
|
|
|
|
+static int adp5588_gpio_to_irq(struct gpio_chip *chip, unsigned off)
|
|
|
|
+{
|
|
|
|
+ struct adp5588_gpio *dev =
|
|
|
|
+ container_of(chip, struct adp5588_gpio, gpio_chip);
|
|
|
|
+ return dev->irq_base + off;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void adp5588_irq_bus_lock(unsigned int irq)
|
|
|
|
+{
|
|
|
|
+ struct adp5588_gpio *dev = get_irq_chip_data(irq);
|
|
|
|
+ mutex_lock(&dev->irq_lock);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+ /*
|
|
|
|
+ * genirq core code can issue chip->mask/unmask from atomic context.
|
|
|
|
+ * This doesn't work for slow busses where an access needs to sleep.
|
|
|
|
+ * bus_sync_unlock() is therefore called outside the atomic context,
|
|
|
|
+ * syncs the current irq mask state with the slow external controller
|
|
|
|
+ * and unlocks the bus.
|
|
|
|
+ */
|
|
|
|
+
|
|
|
|
+static void adp5588_irq_bus_sync_unlock(unsigned int irq)
|
|
|
|
+{
|
|
|
|
+ struct adp5588_gpio *dev = get_irq_chip_data(irq);
|
|
|
|
+ int i;
|
|
|
|
+
|
|
|
|
+ for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++)
|
|
|
|
+ if (dev->int_en[i] ^ dev->irq_mask[i]) {
|
|
|
|
+ dev->int_en[i] = dev->irq_mask[i];
|
|
|
|
+ adp5588_gpio_write(dev->client, GPIO_INT_EN1 + i,
|
|
|
|
+ dev->int_en[i]);
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ mutex_unlock(&dev->irq_lock);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void adp5588_irq_mask(unsigned int irq)
|
|
|
|
+{
|
|
|
|
+ struct adp5588_gpio *dev = get_irq_chip_data(irq);
|
|
|
|
+ unsigned gpio = irq - dev->irq_base;
|
|
|
|
+
|
|
|
|
+ dev->irq_mask[ADP5588_BANK(gpio)] &= ~ADP5588_BIT(gpio);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void adp5588_irq_unmask(unsigned int irq)
|
|
|
|
+{
|
|
|
|
+ struct adp5588_gpio *dev = get_irq_chip_data(irq);
|
|
|
|
+ unsigned gpio = irq - dev->irq_base;
|
|
|
|
+
|
|
|
|
+ dev->irq_mask[ADP5588_BANK(gpio)] |= ADP5588_BIT(gpio);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int adp5588_irq_set_type(unsigned int irq, unsigned int type)
|
|
|
|
+{
|
|
|
|
+ struct adp5588_gpio *dev = get_irq_chip_data(irq);
|
|
|
|
+ uint16_t gpio = irq - dev->irq_base;
|
|
|
|
+ unsigned bank, bit;
|
|
|
|
+
|
|
|
|
+ if ((type & IRQ_TYPE_EDGE_BOTH)) {
|
|
|
|
+ dev_err(&dev->client->dev, "irq %d: unsupported type %d\n",
|
|
|
|
+ irq, type);
|
|
|
|
+ return -EINVAL;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ bank = ADP5588_BANK(gpio);
|
|
|
|
+ bit = ADP5588_BIT(gpio);
|
|
|
|
+
|
|
|
|
+ if (type & IRQ_TYPE_LEVEL_HIGH)
|
|
|
|
+ dev->int_lvl[bank] |= bit;
|
|
|
|
+ else if (type & IRQ_TYPE_LEVEL_LOW)
|
|
|
|
+ dev->int_lvl[bank] &= ~bit;
|
|
|
|
+ else
|
|
|
|
+ return -EINVAL;
|
|
|
|
+
|
|
|
|
+ adp5588_gpio_direction_input(&dev->gpio_chip, gpio);
|
|
|
|
+ adp5588_gpio_write(dev->client, GPIO_INT_LVL1 + bank,
|
|
|
|
+ dev->int_lvl[bank]);
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static struct irq_chip adp5588_irq_chip = {
|
|
|
|
+ .name = "adp5588",
|
|
|
|
+ .mask = adp5588_irq_mask,
|
|
|
|
+ .unmask = adp5588_irq_unmask,
|
|
|
|
+ .bus_lock = adp5588_irq_bus_lock,
|
|
|
|
+ .bus_sync_unlock = adp5588_irq_bus_sync_unlock,
|
|
|
|
+ .set_type = adp5588_irq_set_type,
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static int adp5588_gpio_read_intstat(struct i2c_client *client, u8 *buf)
|
|
|
|
+{
|
|
|
|
+ int ret = i2c_smbus_read_i2c_block_data(client, GPIO_INT_STAT1, 3, buf);
|
|
|
|
+
|
|
|
|
+ if (ret < 0)
|
|
|
|
+ dev_err(&client->dev, "Read INT_STAT Error\n");
|
|
|
|
+
|
|
|
|
+ return ret;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static irqreturn_t adp5588_irq_handler(int irq, void *devid)
|
|
|
|
+{
|
|
|
|
+ struct adp5588_gpio *dev = devid;
|
|
|
|
+ unsigned status, bank, bit, pending;
|
|
|
|
+ int ret;
|
|
|
|
+ status = adp5588_gpio_read(dev->client, INT_STAT);
|
|
|
|
+
|
|
|
|
+ if (status & ADP5588_GPI_INT) {
|
|
|
|
+ ret = adp5588_gpio_read_intstat(dev->client, dev->irq_stat);
|
|
|
|
+ if (ret < 0)
|
|
|
|
+ memset(dev->irq_stat, 0, ARRAY_SIZE(dev->irq_stat));
|
|
|
|
+
|
|
|
|
+ for (bank = 0; bank <= ADP5588_BANK(ADP5588_MAXGPIO);
|
|
|
|
+ bank++, bit = 0) {
|
|
|
|
+ pending = dev->irq_stat[bank] & dev->irq_mask[bank];
|
|
|
|
+
|
|
|
|
+ while (pending) {
|
|
|
|
+ if (pending & (1 << bit)) {
|
|
|
|
+ handle_nested_irq(dev->irq_base +
|
|
|
|
+ (bank << 3) + bit);
|
|
|
|
+ pending &= ~(1 << bit);
|
|
|
|
+
|
|
|
|
+ }
|
|
|
|
+ bit++;
|
|
|
|
+ }
|
|
|
|
+ }
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ adp5588_gpio_write(dev->client, INT_STAT, status); /* Status is W1C */
|
|
|
|
+
|
|
|
|
+ return IRQ_HANDLED;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int adp5588_irq_setup(struct adp5588_gpio *dev)
|
|
|
|
+{
|
|
|
|
+ struct i2c_client *client = dev->client;
|
|
|
|
+ struct adp5588_gpio_platform_data *pdata = client->dev.platform_data;
|
|
|
|
+ unsigned gpio;
|
|
|
|
+ int ret;
|
|
|
|
+
|
|
|
|
+ adp5588_gpio_write(client, CFG, ADP5588_AUTO_INC);
|
|
|
|
+ adp5588_gpio_write(client, INT_STAT, -1); /* status is W1C */
|
|
|
|
+ adp5588_gpio_read_intstat(client, dev->irq_stat); /* read to clear */
|
|
|
|
+
|
|
|
|
+ dev->irq_base = pdata->irq_base;
|
|
|
|
+ mutex_init(&dev->irq_lock);
|
|
|
|
+
|
|
|
|
+ for (gpio = 0; gpio < dev->gpio_chip.ngpio; gpio++) {
|
|
|
|
+ int irq = gpio + dev->irq_base;
|
|
|
|
+ set_irq_chip_data(irq, dev);
|
|
|
|
+ set_irq_chip_and_handler(irq, &adp5588_irq_chip,
|
|
|
|
+ handle_level_irq);
|
|
|
|
+ set_irq_nested_thread(irq, 1);
|
|
|
|
+#ifdef CONFIG_ARM
|
|
|
|
+ /*
|
|
|
|
+ * ARM needs us to explicitly flag the IRQ as VALID,
|
|
|
|
+ * once we do so, it will also set the noprobe.
|
|
|
|
+ */
|
|
|
|
+ set_irq_flags(irq, IRQF_VALID);
|
|
|
|
+#else
|
|
|
|
+ set_irq_noprobe(irq);
|
|
|
|
+#endif
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ ret = request_threaded_irq(client->irq,
|
|
|
|
+ NULL,
|
|
|
|
+ adp5588_irq_handler,
|
|
|
|
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
|
|
|
|
+ dev_name(&client->dev), dev);
|
|
|
|
+ if (ret) {
|
|
|
|
+ dev_err(&client->dev, "failed to request irq %d\n",
|
|
|
|
+ client->irq);
|
|
|
|
+ goto out;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ dev->gpio_chip.to_irq = adp5588_gpio_to_irq;
|
|
|
|
+ adp5588_gpio_write(client, CFG,
|
|
|
|
+ ADP5588_AUTO_INC | ADP5588_INT_CFG | ADP5588_GPI_INT);
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+
|
|
|
|
+out:
|
|
|
|
+ dev->irq_base = 0;
|
|
|
|
+ return ret;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void adp5588_irq_teardown(struct adp5588_gpio *dev)
|
|
|
|
+{
|
|
|
|
+ if (dev->irq_base)
|
|
|
|
+ free_irq(dev->client->irq, dev);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+#else
|
|
|
|
+static int adp5588_irq_setup(struct adp5588_gpio *dev)
|
|
|
|
+{
|
|
|
|
+ struct i2c_client *client = dev->client;
|
|
|
|
+ dev_warn(&client->dev, "interrupt support not compiled in\n");
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void adp5588_irq_teardown(struct adp5588_gpio *dev)
|
|
|
|
+{
|
|
|
|
+}
|
|
|
|
+#endif /* CONFIG_GPIO_ADP5588_IRQ */
|
|
|
|
+
|
|
static int __devinit adp5588_gpio_probe(struct i2c_client *client,
|
|
static int __devinit adp5588_gpio_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
const struct i2c_device_id *id)
|
|
{
|
|
{
|
|
@@ -160,37 +380,46 @@ static int __devinit adp5588_gpio_probe(struct i2c_client *client,
|
|
gc->can_sleep = 1;
|
|
gc->can_sleep = 1;
|
|
|
|
|
|
gc->base = pdata->gpio_start;
|
|
gc->base = pdata->gpio_start;
|
|
- gc->ngpio = MAXGPIO;
|
|
|
|
|
|
+ gc->ngpio = ADP5588_MAXGPIO;
|
|
gc->label = client->name;
|
|
gc->label = client->name;
|
|
gc->owner = THIS_MODULE;
|
|
gc->owner = THIS_MODULE;
|
|
|
|
|
|
mutex_init(&dev->lock);
|
|
mutex_init(&dev->lock);
|
|
|
|
|
|
-
|
|
|
|
ret = adp5588_gpio_read(dev->client, DEV_ID);
|
|
ret = adp5588_gpio_read(dev->client, DEV_ID);
|
|
if (ret < 0)
|
|
if (ret < 0)
|
|
goto err;
|
|
goto err;
|
|
|
|
|
|
revid = ret & ADP5588_DEVICE_ID_MASK;
|
|
revid = ret & ADP5588_DEVICE_ID_MASK;
|
|
|
|
|
|
- for (i = 0, ret = 0; i <= ADP_BANK(MAXGPIO); i++) {
|
|
|
|
|
|
+ for (i = 0, ret = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
|
|
dev->dat_out[i] = adp5588_gpio_read(client, GPIO_DAT_OUT1 + i);
|
|
dev->dat_out[i] = adp5588_gpio_read(client, GPIO_DAT_OUT1 + i);
|
|
dev->dir[i] = adp5588_gpio_read(client, GPIO_DIR1 + i);
|
|
dev->dir[i] = adp5588_gpio_read(client, GPIO_DIR1 + i);
|
|
ret |= adp5588_gpio_write(client, KP_GPIO1 + i, 0);
|
|
ret |= adp5588_gpio_write(client, KP_GPIO1 + i, 0);
|
|
ret |= adp5588_gpio_write(client, GPIO_PULL1 + i,
|
|
ret |= adp5588_gpio_write(client, GPIO_PULL1 + i,
|
|
(pdata->pullup_dis_mask >> (8 * i)) & 0xFF);
|
|
(pdata->pullup_dis_mask >> (8 * i)) & 0xFF);
|
|
-
|
|
|
|
|
|
+ ret |= adp5588_gpio_write(client, GPIO_INT_EN1 + i, 0);
|
|
if (ret)
|
|
if (ret)
|
|
goto err;
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
|
|
|
|
+ if (pdata->irq_base) {
|
|
|
|
+ if (WA_DELAYED_READOUT_REVID(revid)) {
|
|
|
|
+ dev_warn(&client->dev, "GPIO int not supported\n");
|
|
|
|
+ } else {
|
|
|
|
+ ret = adp5588_irq_setup(dev);
|
|
|
|
+ if (ret)
|
|
|
|
+ goto err;
|
|
|
|
+ }
|
|
|
|
+ }
|
|
|
|
+
|
|
ret = gpiochip_add(&dev->gpio_chip);
|
|
ret = gpiochip_add(&dev->gpio_chip);
|
|
if (ret)
|
|
if (ret)
|
|
- goto err;
|
|
|
|
|
|
+ goto err_irq;
|
|
|
|
|
|
- dev_info(&client->dev, "gpios %d..%d on a %s Rev. %d\n",
|
|
|
|
|
|
+ dev_info(&client->dev, "gpios %d..%d (IRQ Base %d) on a %s Rev. %d\n",
|
|
gc->base, gc->base + gc->ngpio - 1,
|
|
gc->base, gc->base + gc->ngpio - 1,
|
|
- client->name, revid);
|
|
|
|
|
|
+ pdata->irq_base, client->name, revid);
|
|
|
|
|
|
if (pdata->setup) {
|
|
if (pdata->setup) {
|
|
ret = pdata->setup(client, gc->base, gc->ngpio, pdata->context);
|
|
ret = pdata->setup(client, gc->base, gc->ngpio, pdata->context);
|
|
@@ -199,8 +428,11 @@ static int __devinit adp5588_gpio_probe(struct i2c_client *client,
|
|
}
|
|
}
|
|
|
|
|
|
i2c_set_clientdata(client, dev);
|
|
i2c_set_clientdata(client, dev);
|
|
|
|
+
|
|
return 0;
|
|
return 0;
|
|
|
|
|
|
|
|
+err_irq:
|
|
|
|
+ adp5588_irq_teardown(dev);
|
|
err:
|
|
err:
|
|
kfree(dev);
|
|
kfree(dev);
|
|
return ret;
|
|
return ret;
|
|
@@ -222,6 +454,9 @@ static int __devexit adp5588_gpio_remove(struct i2c_client *client)
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
|
|
+ if (dev->irq_base)
|
|
|
|
+ free_irq(dev->client->irq, dev);
|
|
|
|
+
|
|
ret = gpiochip_remove(&dev->gpio_chip);
|
|
ret = gpiochip_remove(&dev->gpio_chip);
|
|
if (ret) {
|
|
if (ret) {
|
|
dev_err(&client->dev, "gpiochip_remove failed %d\n", ret);
|
|
dev_err(&client->dev, "gpiochip_remove failed %d\n", ret);
|