[PATCH] AVR32: Use __raw MMIO access for internal peripherals

The read[bwl] and write[bwl] functions are meant for accessing PCI
devices. How this is achieved on AVR32 is unknown, as there are no
systems with a PCI bridge available yet.

On-chip peripheral access, however, should not depend on how we end
up implementing PCI access, so using __raw_read[bwl]/__raw_write[bwl]
is the right thing to do for on-chip peripherals. This patch converts
the drivers for the static memory controller, interrupt controller,
PIO controller and system manager to use __raw MMIO access.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

arch/avr32/mach-at32ap/hsmc.h

@@ -120,8 +120,8 @@
 
 /* Register access macros */
 #define hsmc_readl(port,reg)						\
-	readl((port)->regs + HSMC_##reg)
+	__raw_readl((port)->regs + HSMC_##reg)
 #define hsmc_writel(port,reg,value)					\
-	writel((value), (port)->regs + HSMC_##reg)
+	__raw_writel((value), (port)->regs + HSMC_##reg)
 
 #endif /* __ASM_AVR32_HSMC_H__ */

arch/avr32/mach-at32ap/intc.h

@@ -321,7 +321,9 @@
 #define INTC_MKBF(name, value)       (((value) & ((1 << INTC_##name##_SIZE) - 1)) << INTC_##name##_OFFSET)
 #define INTC_GETBF(name, value)      (((value) >> INTC_##name##_OFFSET) & ((1 << INTC_##name##_SIZE) - 1))
 
-#define intc_readl(port,reg)         readl((port)->regs + INTC_##reg)
-#define intc_writel(port,reg,value)  writel((value), (port)->regs + INTC_##reg)
+#define intc_readl(port,reg)					\
+	__raw_readl((port)->regs + INTC_##reg)
+#define intc_writel(port,reg,value)				\
+	__raw_writel((value), (port)->regs + INTC_##reg)
 
 #endif /* __ASM_AVR32_PERIHP_INTC_H__ */

arch/avr32/mach-at32ap/pio.h

@@ -170,8 +170,10 @@
 #define PIO_BFINS(name,value,old)              (((old) & ~(((1 << PIO_##name##_SIZE) - 1) << PIO_##name##_OFFSET)) | PIO_BF(name,value))
 
 /* Register access macros */
-#define pio_readl(port,reg)                    readl((port)->regs + PIO_##reg)
-#define pio_writel(port,reg,value)             writel((value), (port)->regs + PIO_##reg)
+#define pio_readl(port,reg)					\
+	__raw_readl((port)->regs + PIO_##reg)
+#define pio_writel(port,reg,value)				\
+	__raw_writel((value), (port)->regs + PIO_##reg)
 
 void at32_init_pio(struct platform_device *pdev);
 

arch/avr32/mach-at32ap/sm.h

@@ -234,7 +234,9 @@
 #define SM_BFINS(name,value,old)                (((old) & ~(((1 << SM_##name##_SIZE) - 1) << SM_##name##_OFFSET)) | SM_BF(name,value))
 
 /* Register access macros */
-#define sm_readl(port,reg)                      readl((port)->regs + SM_##reg)
-#define sm_writel(port,reg,value)               writel((value), (port)->regs + SM_##reg)
+#define sm_readl(port,reg)					\
+	__raw_readl((port)->regs + SM_##reg)
+#define sm_writel(port,reg,value)				\
+	__raw_writel((value), (port)->regs + SM_##reg)
 
 #endif /* __ASM_AVR32_SM_H__ */