[PATCH] oss: remove deprecated PM interface from opl3sa2 driver

This change removes the old, deprecated interface from the opl3sa2 driver,
including the pm_{,un}register() calls, the local storage of the pmdev object
and the reference to the old header files.  This change is done to assist in
eradicating the users of the legacy interface so as to help facilitate the
removal of the interface itself.

Signed-off-by: Patrick Mochel <mochel@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

sound/oss/opl3sa2.c

@@ -69,8 +69,6 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/delay.h>
-#include <linux/pm.h>
-#include <linux/pm_legacy.h>
 #include "sound_config.h"
 
 #include "ad1848.h"
@@ -138,10 +136,6 @@ typedef struct {
 	/* PnP Stuff */
 	struct pnp_dev* pdev;
 	int activated;			/* Whether said devices have been activated */
-#endif
-#ifdef CONFIG_PM_LEGACY
-	unsigned int	in_suspend;
-	struct pm_dev	*pmdev;
 #endif
 	unsigned int	card;
 	int		chipset;	/* What's my version(s)? */
@@ -341,22 +335,6 @@ static void opl3sa2_mixer_reset(opl3sa2_state_t* devc)
 	}
 }
 
-/* Currently only used for power management */
-#ifdef CONFIG_PM_LEGACY
-static void opl3sa2_mixer_restore(opl3sa2_state_t* devc)
-{
-	if (devc) {
-		opl3sa2_set_volume(devc, devc->volume_l, devc->volume_r);
-		opl3sa2_set_mic(devc, devc->mic);
-
-		if (devc->chipset == CHIPSET_OPL3SA3) {
-			opl3sa3_set_bass(devc, devc->bass_l, devc->bass_r);
-			opl3sa3_set_treble(devc, devc->treble_l, devc->treble_r);
-		}
-	}
-}
-#endif /* CONFIG_PM_LEGACY */
-
 static inline void arg_to_vol_mono(unsigned int vol, int* value)
 {
 	int left;
@@ -832,84 +810,6 @@ static struct pnp_driver opl3sa2_driver = {
 
 /* End of component functions */
 
-#ifdef CONFIG_PM_LEGACY
-
-static DEFINE_SPINLOCK(opl3sa2_lock);
-
-/* Power Management support functions */
-static int opl3sa2_suspend(struct pm_dev *pdev, unsigned int pm_mode)
-{
-	unsigned long flags;
-	opl3sa2_state_t *p;
-
-	if (!pdev)
-		return -EINVAL;
-
-	spin_lock_irqsave(&opl3sa2_lock,flags);
-
-	p = (opl3sa2_state_t *) pdev->data;
-	switch (pm_mode) {
-	case 1:
-		pm_mode = OPL3SA2_PM_MODE1;
-		break;
-	case 2:
-		pm_mode = OPL3SA2_PM_MODE2;
-		break;
-	case 3:
-		pm_mode = OPL3SA2_PM_MODE3;
-		break;
-	default:
-		/* we don't know howto handle this... */
-		spin_unlock_irqrestore(&opl3sa2_lock, flags);
-		return -EBUSY;
-	}
-
-	p->in_suspend = 1;
-
-	/* its supposed to automute before suspending, so we won't bother */
-	opl3sa2_write(p->cfg_port, OPL3SA2_PM, pm_mode);
-	/* wait a while for the clock oscillator to stabilise */
-	mdelay(10);
-
-	spin_unlock_irqrestore(&opl3sa2_lock,flags);
-	return 0;
-}
-
-static int opl3sa2_resume(struct pm_dev *pdev)
-{
-	unsigned long flags;
-	opl3sa2_state_t *p;
-
- 	if (!pdev)
- 		return -EINVAL;
-
-	p = (opl3sa2_state_t *) pdev->data;
-	spin_lock_irqsave(&opl3sa2_lock,flags);
-
- 	/* I don't think this is necessary */
-	opl3sa2_write(p->cfg_port, OPL3SA2_PM, OPL3SA2_PM_MODE0);
-	opl3sa2_mixer_restore(p);
- 	p->in_suspend = 0;
-
-	spin_unlock_irqrestore(&opl3sa2_lock,flags);
-	return 0;
-}
-
-static int opl3sa2_pm_callback(struct pm_dev *pdev, pm_request_t rqst, void *data)
-{
-	unsigned long mode = (unsigned  long)data;
-
-	switch (rqst) {
-		case PM_SUSPEND:
-			return opl3sa2_suspend(pdev, mode);
-
-		case PM_RESUME:
-			return opl3sa2_resume(pdev);
-	}
-	return 0;
-}
-#endif /* CONFIG_PM_LEGACY */
-
 /*
  * Install OPL3-SA2 based card(s).
  *
@@ -1021,12 +921,6 @@ static int __init init_opl3sa2(void)
 
 		/* ewww =) */
 		opl3sa2_state[card].card = card;
-#ifdef CONFIG_PM_LEGACY
-		/* register our power management capabilities */
-		opl3sa2_state[card].pmdev = pm_register(PM_ISA_DEV, card, opl3sa2_pm_callback);
-		if (opl3sa2_state[card].pmdev)
-			opl3sa2_state[card].pmdev->data = &opl3sa2_state[card];
-#endif /* CONFIG_PM_LEGACY */
 
 		/*
 		 * Set the Yamaha 3D enhancement mode (aka Ymersion) if asked to and
@@ -1083,10 +977,6 @@ static void __exit cleanup_opl3sa2(void)
 	int card;
 
 	for(card = 0; card < opl3sa2_cards_num; card++) {
-#ifdef CONFIG_PM_LEGACY
-		if (opl3sa2_state[card].pmdev)
-			pm_unregister(opl3sa2_state[card].pmdev);
-#endif
 	        if (opl3sa2_state[card].cfg_mpu.slots[1] != -1) {
 			unload_opl3sa2_mpu(&opl3sa2_state[card].cfg_mpu);
  		}