Merge branch 'linus' into tracing/core

Merge reason: tracing/core was on a .30-rc1 base and was missing out on
              on a handful of tracing fixes present in .30-rc5-almost.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

.gitignore

@@ -49,6 +49,7 @@ include/linux/compile.h
 include/linux/version.h
 include/linux/utsrelease.h
 include/linux/bounds.h
+include/generated
 
 # stgit generated dirs
 patches-*

Documentation/ABI/testing/debugfs-pktcdvd

@@ -1,4 +1,4 @@
-What:           /debug/pktcdvd/pktcdvd[0-7]
+What:           /sys/kernel/debug/pktcdvd/pktcdvd[0-7]
 Date:           Oct. 2006
 KernelVersion:  2.6.20
 Contact:        Thomas Maier <balagi@justmail.de>
@@ -10,10 +10,10 @@ debugfs interface
 The pktcdvd module (packet writing driver) creates
 these files in debugfs:
 
-/debug/pktcdvd/pktcdvd[0-7]/
+/sys/kernel/debug/pktcdvd/pktcdvd[0-7]/
     info            (0444) Lots of driver statistics and infos.
 
 Example:
 -------
 
-cat /debug/pktcdvd/pktcdvd0/info
+cat /sys/kernel/debug/pktcdvd/pktcdvd0/info

Documentation/ABI/testing/sysfs-firmware-acpi

@@ -69,9 +69,13 @@ Description:
 		gpe1F:	     0	invalid
 		gpe_all:    1192
 		sci:	1194
+		sci_not:     0	
 
-		sci - The total number of times the ACPI SCI
-		has claimed an interrupt.
+		sci - The number of times the ACPI SCI
+		has been called and claimed an interrupt.
+
+		sci_not - The number of times the ACPI SCI
+		has been called and NOT claimed an interrupt.
 
 		gpe_all - count of SCI caused by GPEs.
 

Documentation/DocBook/Makefile

@@ -144,7 +144,8 @@ quiet_cmd_db2pdf = PDF     $@
 	$(call cmd,db2pdf)
 
 
-main_idx = Documentation/DocBook/index.html
+index = index.html
+main_idx = Documentation/DocBook/$(index)
 build_main_index = rm -rf $(main_idx) && \
 		   echo '<h1>Linux Kernel HTML Documentation</h1>' >> $(main_idx) && \
 		   echo '<h2>Kernel Version: $(KERNELVERSION)</h2>' >> $(main_idx) && \
@@ -233,7 +234,7 @@ clean-files := $(DOCBOOKS) \
 	$(patsubst %.xml, %.pdf,  $(DOCBOOKS)) \
 	$(patsubst %.xml, %.html, $(DOCBOOKS)) \
 	$(patsubst %.xml, %.9,    $(DOCBOOKS)) \
-	$(C-procfs-example)
+	$(C-procfs-example) $(index)
 
 clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man
 

Documentation/DocBook/kernel-api.tmpl

@@ -190,16 +190,20 @@ X!Ekernel/module.c
 !Edrivers/pci/pci.c
 !Edrivers/pci/pci-driver.c
 !Edrivers/pci/remove.c
-!Edrivers/pci/pci-acpi.c
 !Edrivers/pci/search.c
 !Edrivers/pci/msi.c
 !Edrivers/pci/bus.c
+!Edrivers/pci/access.c
+!Edrivers/pci/irq.c
+!Edrivers/pci/htirq.c
 <!-- FIXME: Removed for now since no structured comments in source
 X!Edrivers/pci/hotplug.c
 -->
 !Edrivers/pci/probe.c
+!Edrivers/pci/slot.c
 !Edrivers/pci/rom.c
 !Edrivers/pci/iov.c
+!Idrivers/pci/pci-sysfs.c
      </sect1>
      <sect1><title>PCI Hotplug Support Library</title>
 !Edrivers/pci/hotplug/pci_hotplug_core.c

Documentation/block/biodoc.txt

@@ -1040,23 +1040,21 @@ Front merges are handled by the binary trees in AS and deadline schedulers.
 iii. Plugging the queue to batch requests in anticipation of opportunities for
      merge/sort optimizations
 
-This is just the same as in 2.4 so far, though per-device unplugging
-support is anticipated for 2.5. Also with a priority-based i/o scheduler,
-such decisions could be based on request priorities.
-
 Plugging is an approach that the current i/o scheduling algorithm resorts to so
 that it collects up enough requests in the queue to be able to take
 advantage of the sorting/merging logic in the elevator. If the
 queue is empty when a request comes in, then it plugs the request queue
-(sort of like plugging the bottom of a vessel to get fluid to build up)
+(sort of like plugging the bath tub of a vessel to get fluid to build up)
 till it fills up with a few more requests, before starting to service
 the requests. This provides an opportunity to merge/sort the requests before
 passing them down to the device. There are various conditions when the queue is
 unplugged (to open up the flow again), either through a scheduled task or
 could be on demand. For example wait_on_buffer sets the unplugging going
-(by running tq_disk) so the read gets satisfied soon. So in the read case,
-the queue gets explicitly unplugged as part of waiting for completion,
-in fact all queues get unplugged as a side-effect.
+through sync_buffer() running blk_run_address_space(mapping). Or the caller
+can do it explicity through blk_unplug(bdev). So in the read case,
+the queue gets explicitly unplugged as part of waiting for completion on that
+buffer. For page driven IO, the address space ->sync_page() takes care of
+doing the blk_run_address_space().
 
 Aside:
   This is kind of controversial territory, as it's not clear if plugging is
@@ -1067,11 +1065,6 @@ Aside:
   multi-page bios being queued in one shot, we may not need to wait to merge
   a big request from the broken up pieces coming by.
 
-  Per-queue granularity unplugging (still a Todo) may help reduce some of the
-  concerns with just a single tq_disk flush approach. Something like
-  blk_kick_queue() to unplug a specific queue (right away ?)
-  or optionally, all queues, is in the plan.
-
 4.4 I/O contexts
 I/O contexts provide a dynamically allocated per process data area. They may
 be used in I/O schedulers, and in the block layer (could be used for IO statis,

Documentation/cgroups/memory.txt

@@ -6,15 +6,14 @@ used here with the memory controller that is used in hardware.
 
 Salient features
 
-a. Enable control of both RSS (mapped) and Page Cache (unmapped) pages
+a. Enable control of Anonymous, Page Cache (mapped and unmapped) and
+   Swap Cache memory pages.
 b. The infrastructure allows easy addition of other types of memory to control
 c. Provides *zero overhead* for non memory controller users
 d. Provides a double LRU: global memory pressure causes reclaim from the
    global LRU; a cgroup on hitting a limit, reclaims from the per
    cgroup LRU
 
-NOTE: Swap Cache (unmapped) is not accounted now.
-
 Benefits and Purpose of the memory controller
 
 The memory controller isolates the memory behaviour of a group of tasks
@@ -290,34 +289,44 @@ will be charged as a new owner of it.
   moved to the parent. If you want to avoid that, force_empty will be useful.
 
 5.2 stat file
-  memory.stat file includes following statistics (now)
-	cache			- # of pages from page-cache and shmem.
-	rss			- # of pages from anonymous memory.
-	pgpgin			- # of event of charging
-	pgpgout			- # of event of uncharging
-	active_anon		- # of pages on active lru of anon, shmem.
-	inactive_anon 		- # of pages on active lru of anon, shmem
-	active_file		- # of pages on active lru of file-cache
-	inactive_file		- # of pages on inactive lru of file cache
-	unevictable		- # of pages cannot be reclaimed.(mlocked etc)
-
-	Below is depend on CONFIG_DEBUG_VM.
-	inactive_ratio		- VM internal parameter. (see mm/page_alloc.c)
-	recent_rotated_anon	- VM internal parameter. (see mm/vmscan.c)
-	recent_rotated_file	- VM internal parameter. (see mm/vmscan.c)
-	recent_scanned_anon 	- VM internal parameter. (see mm/vmscan.c)
-	recent_scanned_file 	- VM internal parameter. (see mm/vmscan.c)
-
-  Memo:
+
+memory.stat file includes following statistics
+
+cache		- # of bytes of page cache memory.
+rss		- # of bytes of anonymous and swap cache memory.
+pgpgin		- # of pages paged in (equivalent to # of charging events).
+pgpgout		- # of pages paged out (equivalent to # of uncharging events).
+active_anon	- # of bytes of anonymous and  swap cache memory on active
+		  lru list.
+inactive_anon	- # of bytes of anonymous memory and swap cache memory on
+		  inactive lru list.
+active_file	- # of bytes of file-backed memory on active lru list.
+inactive_file	- # of bytes of file-backed memory on inactive lru list.
+unevictable	- # of bytes of memory that cannot be reclaimed (mlocked etc).
+
+The following additional stats are dependent on CONFIG_DEBUG_VM.
+
+inactive_ratio		- VM internal parameter. (see mm/page_alloc.c)
+recent_rotated_anon	- VM internal parameter. (see mm/vmscan.c)
+recent_rotated_file	- VM internal parameter. (see mm/vmscan.c)
+recent_scanned_anon	- VM internal parameter. (see mm/vmscan.c)
+recent_scanned_file	- VM internal parameter. (see mm/vmscan.c)
+
+Memo:
 	recent_rotated means recent frequency of lru rotation.
 	recent_scanned means recent # of scans to lru.
 	showing for better debug please see the code for meanings.
 
+Note:
+	Only anonymous and swap cache memory is listed as part of 'rss' stat.
+	This should not be confused with the true 'resident set size' or the
+	amount of physical memory used by the cgroup. Per-cgroup rss
+	accounting is not done yet.
 
 5.3 swappiness
   Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
 
-  Following cgroup's swapiness can't be changed.
+  Following cgroups' swapiness can't be changed.
   - root cgroup (uses /proc/sys/vm/swappiness).
   - a cgroup which uses hierarchy and it has child cgroup.
   - a cgroup which uses hierarchy and not the root of hierarchy.

Documentation/cgroups/resource_counter.txt

@@ -47,13 +47,18 @@ to work with it.
 
 2. Basic accounting routines
 
- a. void res_counter_init(struct res_counter *rc)
+ a. void res_counter_init(struct res_counter *rc,
+				struct res_counter *rc_parent)
 
  	Initializes the resource counter. As usual, should be the first
 	routine called for a new counter.
 
- b. int res_counter_charge[_locked]
-			(struct res_counter *rc, unsigned long val)
+	The struct res_counter *parent can be used to define a hierarchical
+	child -> parent relationship directly in the res_counter structure,
+	NULL can be used to define no relationship.
+
+ c. int res_counter_charge(struct res_counter *rc, unsigned long val,
+				struct res_counter **limit_fail_at)
 
 	When a resource is about to be allocated it has to be accounted
 	with the appropriate resource counter (controller should determine
@@ -67,15 +72,25 @@ to work with it.
 	  * if the charging is performed first, then it should be uncharged
 	    on error path (if the one is called).
 
- c. void res_counter_uncharge[_locked]
+	If the charging fails and a hierarchical dependency exists, the
+	limit_fail_at parameter is set to the particular res_counter element
+	where the charging failed.
+
+ d. int res_counter_charge_locked
+			(struct res_counter *rc, unsigned long val)
+
+	The same as res_counter_charge(), but it must not acquire/release the
+	res_counter->lock internally (it must be called with res_counter->lock
+	held).
+
+ e. void res_counter_uncharge[_locked]
 			(struct res_counter *rc, unsigned long val)
 
 	When a resource is released (freed) it should be de-accounted
 	from the resource counter it was accounted to.  This is called
 	"uncharging".
 
-    The _locked routines imply that the res_counter->lock is taken.
-
+	The _locked routines imply that the res_counter->lock is taken.
 
  2.1 Other accounting routines
 

Documentation/driver-model/platform.txt

@@ -169,3 +169,62 @@ three different ways to find such a match:
       be probed later if another device registers.  (Which is OK, since
       this interface is only for use with non-hotpluggable devices.)
 
+
+Early Platform Devices and Drivers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The early platform interfaces provide platform data to platform device
+drivers early on during the system boot. The code is built on top of the
+early_param() command line parsing and can be executed very early on.
+
+Example: "earlyprintk" class early serial console in 6 steps
+
+1. Registering early platform device data
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code registers platform device data using the function
+early_platform_add_devices(). In the case of early serial console this
+should be hardware configuration for the serial port. Devices registered
+at this point will later on be matched against early platform drivers.
+
+2. Parsing kernel command line
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code calls parse_early_param() to parse the kernel
+command line. This will execute all matching early_param() callbacks.
+User specified early platform devices will be registered at this point.
+For the early serial console case the user can specify port on the
+kernel command line as "earlyprintk=serial.0" where "earlyprintk" is
+the class string, "serial" is the name of the platfrom driver and
+0 is the platform device id. If the id is -1 then the dot and the
+id can be omitted.
+
+3. Installing early platform drivers belonging to a certain class
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code may optionally force registration of all early
+platform drivers belonging to a certain class using the function
+early_platform_driver_register_all(). User specified devices from
+step 2 have priority over these. This step is omitted by the serial
+driver example since the early serial driver code should be disabled
+unless the user has specified port on the kernel command line.
+
+4. Early platform driver registration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Compiled-in platform drivers making use of early_platform_init() are
+automatically registered during step 2 or 3. The serial driver example
+should use early_platform_init("earlyprintk", &platform_driver).
+
+5. Probing of early platform drivers belonging to a certain class
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code calls early_platform_driver_probe() to match
+registered early platform devices associated with a certain class with
+registered early platform drivers. Matched devices will get probed().
+This step can be executed at any point during the early boot. As soon
+as possible may be good for the serial port case.
+
+6. Inside the early platform driver probe()
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The driver code needs to take special care during early boot, especially
+when it comes to memory allocation and interrupt registration. The code
+in the probe() function can use is_early_platform_device() to check if
+it is called at early platform device or at the regular platform device
+time. The early serial driver performs register_console() at this point.
+
+For further information, see <linux/platform_device.h>.

Documentation/filesystems/Locking

@@ -512,16 +512,24 @@ locking rules:
 		BKL	mmap_sem	PageLocked(page)
 open:		no	yes
 close:		no	yes
-fault:		no	yes
-page_mkwrite:	no	yes		no
+fault:		no	yes		can return with page locked
+page_mkwrite:	no	yes		can return with page locked
 access:		no	yes
 
-	->page_mkwrite() is called when a previously read-only page is
-about to become writeable. The file system is responsible for
-protecting against truncate races. Once appropriate action has been
-taking to lock out truncate, the page range should be verified to be
-within i_size. The page mapping should also be checked that it is not
-NULL.
+	->fault() is called when a previously not present pte is about
+to be faulted in. The filesystem must find and return the page associated
+with the passed in "pgoff" in the vm_fault structure. If it is possible that
+the page may be truncated and/or invalidated, then the filesystem must lock
+the page, then ensure it is not already truncated (the page lock will block
+subsequent truncate), and then return with VM_FAULT_LOCKED, and the page
+locked. The VM will unlock the page.
+
+	->page_mkwrite() is called when a previously read-only pte is
+about to become writeable. The filesystem again must ensure that there are
+no truncate/invalidate races, and then return with the page locked. If
+the page has been truncated, the filesystem should not look up a new page
+like the ->fault() handler, but simply return with VM_FAULT_NOPAGE, which
+will cause the VM to retry the fault.
 
 	->access() is called when get_user_pages() fails in
 acces_process_vm(), typically used to debug a process through

Documentation/filesystems/caching/cachefiles.txt

@@ -407,7 +407,7 @@ A NOTE ON SECURITY
 ==================
 
 CacheFiles makes use of the split security in the task_struct.  It allocates
-its own task_security structure, and redirects current->act_as to point to it
+its own task_security structure, and redirects current->cred to point to it
 when it acts on behalf of another process, in that process's context.
 
 The reason it does this is that it calls vfs_mkdir() and suchlike rather than
@@ -429,9 +429,9 @@ This means it may lose signals or ptrace events for example, and affects what
 the process looks like in /proc.
 
 So CacheFiles makes use of a logical split in the security between the
-objective security (task->sec) and the subjective security (task->act_as).  The
-objective security holds the intrinsic security properties of a process and is
-never overridden.  This is what appears in /proc, and is what is used when a
+objective security (task->real_cred) and the subjective security (task->cred).
+The objective security holds the intrinsic security properties of a process and
+is never overridden.  This is what appears in /proc, and is what is used when a
 process is the target of an operation by some other process (SIGKILL for
 example).
 

Documentation/filesystems/pohmelfs/design_notes.txt

@@ -56,9 +56,10 @@ workloads and can fully utilize the bandwidth to the servers when doing bulk
 data transfers.
 
 POHMELFS clients operate with a working set of servers and are capable of balancing read-only
-operations (like lookups or directory listings) between them.
+operations (like lookups or directory listings) between them according to IO priorities.
 Administrators can add or remove servers from the set at run-time via special commands (described
-in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers.
+in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers, which are connected
+with write permission turned on. IO priority and permissions can be changed in run-time.
 
 POHMELFS is capable of full data channel encryption and/or strong crypto hashing.
 One can select any kernel supported cipher, encryption mode, hash type and operation mode

Documentation/filesystems/pohmelfs/info.txt

@@ -1,6 +1,8 @@
 POHMELFS usage information.
 
-Mount options:
+Mount options.
+All but index, number of crypto threads and maximum IO size can changed via remount.
+
 idx=%u
  Each mountpoint is associated with a special index via this option.
  Administrator can add or remove servers from the given index, so all mounts,
@@ -52,16 +54,27 @@ mcache_timeout=%u
 
 Usage examples.
 
-Add (or remove if it already exists) server server1.net:1025 into the working set with index $idx
+Add server server1.net:1025 into the working set with index $idx
 with appropriate hash algorithm and key file and cipher algorithm, mode and key file:
-$cfg -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key
+$cfg A add -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key
 
 Mount filesystem with given index $idx to /mnt mountpoint.
 Client will connect to all servers specified in the working set via previous command:
 mount -t pohmel -o idx=$idx q /mnt
 
-One can add or remove servers from working set after mounting too.
+Change permissions to read-only (-I 1 option, '-I 2' - write-only, 3 - rw):
+$cfg A modify -a server1.net -p 1025 -i $idx -I 1
+
+Change IO priority to 123 (node with the highest priority gets read requests).
+$cfg A modify -a server1.net -p 1025 -i $idx -P 123
 
+One can check currect status of all connections in the mountstats file:
+# cat /proc/$PID/mountstats
+...
+device none mounted on /mnt with fstype pohmel
+idx addr(:port) socket_type protocol active priority permissions
+0 server1.net:1026 1 6 1 250 1
+0 server2.net:1025 1 6 1 123 3
 
 Server installation.
 

Documentation/filesystems/vfs.txt

@@ -277,8 +277,7 @@ or bottom half).
   unfreeze_fs: called when VFS is unlocking a filesystem and making it writable
   	again.
 
-  statfs: called when the VFS needs to get filesystem statistics. This
-	is called with the kernel lock held
+  statfs: called when the VFS needs to get filesystem statistics.
 
   remount_fs: called when the filesystem is remounted. This is called
 	with the kernel lock held

Documentation/input/bcm5974.txt

@@ -0,0 +1,65 @@
+BCM5974 Driver (bcm5974)
+------------------------
+	Copyright (C) 2008-2009	Henrik Rydberg <rydberg@euromail.se>
+
+The USB initialization and package decoding was made by Scott Shawcroft as
+part of the touchd user-space driver project:
+	Copyright (C) 2008	Scott Shawcroft (scott.shawcroft@gmail.com)
+
+The BCM5974 driver is based on the appletouch driver:
+	Copyright (C) 2001-2004	Greg Kroah-Hartman (greg@kroah.com)
+	Copyright (C) 2005	Johannes Berg (johannes@sipsolutions.net)
+	Copyright (C) 2005	Stelian Pop (stelian@popies.net)
+	Copyright (C) 2005	Frank Arnold (frank@scirocco-5v-turbo.de)
+	Copyright (C) 2005	Peter Osterlund (petero2@telia.com)
+	Copyright (C) 2005	Michael Hanselmann (linux-kernel@hansmi.ch)
+	Copyright (C) 2006	Nicolas Boichat (nicolas@boichat.ch)
+
+This driver adds support for the multi-touch trackpad on the new Apple
+Macbook Air and Macbook Pro laptops. It replaces the appletouch driver on
+those computers, and integrates well with the synaptics driver of the Xorg
+system.
+
+Known to work on Macbook Air, Macbook Pro Penryn and the new unibody
+Macbook 5 and Macbook Pro 5.
+
+Usage
+-----
+
+The driver loads automatically for the supported usb device ids, and
+becomes available both as an event device (/dev/input/event*) and as a
+mouse via the mousedev driver (/dev/input/mice).
+
+USB Race
+--------
+
+The Apple multi-touch trackpads report both mouse and keyboard events via
+different interfaces of the same usb device. This creates a race condition
+with the HID driver, which, if not told otherwise, will find the standard
+HID mouse and keyboard, and claim the whole device. To remedy, the usb
+product id must be listed in the mouse_ignore list of the hid driver.
+
+Debug output
+------------
+
+To ease the development for new hardware version, verbose packet output can
+be switched on with the debug kernel module parameter. The range [1-9]
+yields different levels of verbosity. Example (as root):
+
+echo -n 9 > /sys/module/bcm5974/parameters/debug
+
+tail -f /var/log/debug
+
+echo -n 0 > /sys/module/bcm5974/parameters/debug
+
+Trivia
+------
+
+The driver was developed at the ubuntu forums in June 2008 [1], and now has
+a more permanent home at bitmath.org [2].
+
+Links
+-----
+
+[1] http://ubuntuforums.org/showthread.php?t=840040
+[2] http://http://bitmath.org/code/

Documentation/input/multi-touch-protocol.txt

@@ -0,0 +1,140 @@
+Multi-touch (MT) Protocol
+-------------------------
+	Copyright (C) 2009	Henrik Rydberg <rydberg@euromail.se>
+
+
+Introduction
+------------
+
+In order to utilize the full power of the new multi-touch devices, a way to
+report detailed finger data to user space is needed. This document
+describes the multi-touch (MT) protocol which allows kernel drivers to
+report details for an arbitrary number of fingers.
+
+
+Usage
+-----
+
+Anonymous finger details are sent sequentially as separate packets of ABS
+events. Only the ABS_MT events are recognized as part of a finger
+packet. The end of a packet is marked by calling the input_mt_sync()
+function, which generates a SYN_MT_REPORT event. The end of multi-touch
+transfer is marked by calling the usual input_sync() function.
+
+A set of ABS_MT events with the desired properties is defined. The events
+are divided into categories, to allow for partial implementation.  The
+minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
+ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked.  If the
+device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
+of the approaching finger. Anisotropy and direction may be specified with
+ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with
+more granular information may specify general shapes as blobs, i.e., as a
+sequence of rectangular shapes grouped together by an
+ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify
+whether the touching tool is a finger or a pen or something else.
+
+
+Event Semantics
+---------------
+
+The word "contact" is used to describe a tool which is in direct contact
+with the surface. A finger, a pen or a rubber all classify as contacts.
+
+ABS_MT_TOUCH_MAJOR
+
+The length of the major axis of the contact. The length should be given in
+surface units. If the surface has an X times Y resolution, the largest
+possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal.
+
+ABS_MT_TOUCH_MINOR
+
+The length, in surface units, of the minor axis of the contact. If the
+contact is circular, this event can be omitted.
+
+ABS_MT_WIDTH_MAJOR
+
+The length, in surface units, of the major axis of the approaching
+tool. This should be understood as the size of the tool itself. The
+orientation of the contact and the approaching tool are assumed to be the
+same.
+
+ABS_MT_WIDTH_MINOR
+
+The length, in surface units, of the minor axis of the approaching
+tool. Omit if circular.
+
+The above four values can be used to derive additional information about
+the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
+the notion of pressure. The fingers of the hand and the palm all have
+different characteristic widths [1].
+
+ABS_MT_ORIENTATION
+
+The orientation of the ellipse. The value should describe half a revolution
+clockwise around the touch center. The scale of the value is arbitrary, but
+zero should be returned for an ellipse aligned along the Y axis of the
+surface. As an example, an index finger placed straight onto the axis could
+return zero orientation, something negative when twisted to the left, and
+something positive when twisted to the right. This value can be omitted if
+the touching object is circular, or if the information is not available in
+the kernel driver.
+
+ABS_MT_POSITION_X
+
+The surface X coordinate of the center of the touching ellipse.
+
+ABS_MT_POSITION_Y
+
+The surface Y coordinate of the center of the touching ellipse.
+
+ABS_MT_TOOL_TYPE
+
+The type of approaching tool. A lot of kernel drivers cannot distinguish
+between different tool types, such as a finger or a pen. In such cases, the
+event should be omitted. The protocol currently supports MT_TOOL_FINGER and
+MT_TOOL_PEN [2].
+
+ABS_MT_BLOB_ID
+
+The BLOB_ID groups several packets together into one arbitrarily shaped
+contact. This is a low-level anonymous grouping, and should not be confused
+with the high-level contactID, explained below. Most kernel drivers will
+not have this capability, and can safely omit the event.
+
+
+Finger Tracking
+---------------
+
+The kernel driver should generate an arbitrary enumeration of the set of
+anonymous contacts currently on the surface. The order in which the packets
+appear in the event stream is not important.
+
+The process of finger tracking, i.e., to assign a unique contactID to each
+initiated contact on the surface, is left to user space; preferably the
+multi-touch X driver [3]. In that driver, the contactID stays the same and
+unique until the contact vanishes (when the finger leaves the surface). The
+problem of assigning a set of anonymous fingers to a set of identified
+fingers is a euclidian bipartite matching problem at each event update, and
+relies on a sufficiently rapid update rate.
+
+Notes
+-----
+
+In order to stay compatible with existing applications, the data
+reported in a finger packet must not be recognized as single-touch
+events. In addition, all finger data must bypass input filtering,
+since subsequent events of the same type refer to different fingers.
+
+The first kernel driver to utilize the MT protocol is the bcm5974 driver,
+where examples can be found.
+
+[1] With the extension ABS_MT_APPROACH_X and ABS_MT_APPROACH_Y, the
+difference between the contact position and the approaching tool position
+could be used to derive tilt.
+[2] The list can of course be extended.
+[3] The multi-touch X driver is currently in the prototyping stage. At the
+time of writing (April 2009), the MT protocol is not yet merged, and the
+prototype implements finger matching, basic mouse support and two-finger
+scrolling. The project aims at improving the quality of current multi-touch
+functionality available in the synaptics X driver, and in addition
+implement more advanced gestures.

Documentation/isdn/00-INDEX

@@ -2,8 +2,14 @@
 	- this file (info on ISDN implementation for Linux)
 CREDITS
 	- list of the kind folks that brought you this stuff.
+HiSax.cert
+	- information about the ITU approval certification of the HiSax driver.
 INTERFACE
-	- description of Linklevel and Hardwarelevel ISDN interface.
+	- description of isdn4linux Link Level and Hardware Level interfaces.
+INTERFACE.fax
+	- description of the fax subinterface of isdn4linux.
+INTERFACE.CAPI
+	- description of kernel CAPI Link Level to Hardware Level interface.
 README
 	- general info on what you need and what to do for Linux ISDN.
 README.FAQ
@@ -12,6 +18,8 @@ README.audio
 	- info for running audio over ISDN.
 README.fax
 	- info for using Fax over ISDN.
+README.gigaset
+	- info on the drivers for Siemens Gigaset ISDN adapters.
 README.icn
 	- info on the ICN-ISDN-card and its driver.
 README.HiSax
@@ -37,7 +45,8 @@ README.diversion
 README.sc
 	- info on driver for Spellcaster cards.
 README.x25
-    _ info for running X.25 over ISDN.
+	- info for running X.25 over ISDN.
 README.hysdn
-        - info on driver for Hypercope active HYSDN cards
- 
+	- info on driver for Hypercope active HYSDN cards
+README.mISDN
+	- info on the Modular ISDN subsystem (mISDN).

Documentation/isdn/INTERFACE.CAPI

@@ -0,0 +1,213 @@
+Kernel CAPI Interface to Hardware Drivers
+-----------------------------------------
+
+1. Overview
+
+From the CAPI 2.0 specification:
+COMMON-ISDN-API (CAPI) is an application programming interface standard used
+to access ISDN equipment connected to basic rate interfaces (BRI) and primary
+rate interfaces (PRI).
+
+Kernel CAPI operates as a dispatching layer between CAPI applications and CAPI
+hardware drivers. Hardware drivers register ISDN devices (controllers, in CAPI
+lingo) with Kernel CAPI to indicate their readiness to provide their service
+to CAPI applications. CAPI applications also register with Kernel CAPI,
+requesting association with a CAPI device. Kernel CAPI then dispatches the
+application registration to an available device, forwarding it to the
+corresponding hardware driver. Kernel CAPI then forwards CAPI messages in both
+directions between the application and the hardware driver.
+
+Format and semantics of CAPI messages are specified in the CAPI 2.0 standard.
+This standard is freely available from http://www.capi.org.
+
+
+2. Driver and Device Registration
+
+CAPI drivers optionally register themselves with Kernel CAPI by calling the
+Kernel CAPI function register_capi_driver() with a pointer to a struct
+capi_driver. This structure must be filled with the name and revision of the
+driver, and optionally a pointer to a callback function, add_card(). The
+registration can be revoked by calling the function unregister_capi_driver()
+with a pointer to the same struct capi_driver.
+
+CAPI drivers must register each of the ISDN devices they control with Kernel
+CAPI by calling the Kernel CAPI function attach_capi_ctr() with a pointer to a
+struct capi_ctr before they can be used. This structure must be filled with
+the names of the driver and controller, and a number of callback function
+pointers which are subsequently used by Kernel CAPI for communicating with the
+driver. The registration can be revoked by calling the function
+detach_capi_ctr() with a pointer to the same struct capi_ctr.
+
+Before the device can be actually used, the driver must fill in the device
+information fields 'manu', 'version', 'profile' and 'serial' in the capi_ctr
+structure of the device, and signal its readiness by calling capi_ctr_ready().
+From then on, Kernel CAPI may call the registered callback functions for the
+device.
+
+If the device becomes unusable for any reason (shutdown, disconnect ...), the
+driver has to call capi_ctr_reseted(). This will prevent further calls to the
+callback functions by Kernel CAPI.
+
+
+3. Application Registration and Communication
+
+Kernel CAPI forwards registration requests from applications (calls to CAPI
+operation CAPI_REGISTER) to an appropriate hardware driver by calling its
+register_appl() callback function. A unique Application ID (ApplID, u16) is
+allocated by Kernel CAPI and passed to register_appl() along with the
+parameter structure provided by the application. This is analogous to the
+open() operation on regular files or character devices.
+
+After a successful return from register_appl(), CAPI messages from the
+application may be passed to the driver for the device via calls to the
+send_message() callback function. The CAPI message to send is stored in the
+data portion of an skb. Conversely, the driver may call Kernel CAPI's
+capi_ctr_handle_message() function to pass a received CAPI message to Kernel
+CAPI for forwarding to an application, specifying its ApplID.
+
+Deregistration requests (CAPI operation CAPI_RELEASE) from applications are
+forwarded as calls to the release_appl() callback function, passing the same
+ApplID as with register_appl(). After return from release_appl(), no CAPI
+messages for that application may be passed to or from the device anymore.
+
+
+4. Data Structures
+
+4.1 struct capi_driver
+
+This structure describes a Kernel CAPI driver itself. It is used in the
+register_capi_driver() and unregister_capi_driver() functions, and contains
+the following non-private fields, all to be set by the driver before calling
+register_capi_driver():
+
+char name[32]
+	the name of the driver, as a zero-terminated ASCII string
+char revision[32]
+	the revision number of the driver, as a zero-terminated ASCII string
+int (*add_card)(struct capi_driver *driver, capicardparams *data)
+	a callback function pointer (may be NULL)
+
+
+4.2 struct capi_ctr
+
+This structure describes an ISDN device (controller) handled by a Kernel CAPI
+driver. After registration via the attach_capi_ctr() function it is passed to
+all controller specific lower layer interface and callback functions to
+identify the controller to operate on.
+
+It contains the following non-private fields:
+
+- to be set by the driver before calling attach_capi_ctr():
+
+struct module *owner
+	pointer to the driver module owning the device
+
+void *driverdata
+	an opaque pointer to driver specific data, not touched by Kernel CAPI
+
+char name[32]
+	the name of the controller, as a zero-terminated ASCII string
+
+char *driver_name
+	the name of the driver, as a zero-terminated ASCII string
+
+int (*load_firmware)(struct capi_ctr *ctrlr, capiloaddata *ldata)
+	(optional) pointer to a callback function for sending firmware and
+	configuration data to the device
+
+void (*reset_ctr)(struct capi_ctr *ctrlr)
+	pointer to a callback function for performing a reset on the device,
+	releasing all registered applications
+
+void (*register_appl)(struct capi_ctr *ctrlr, u16 applid,
+			capi_register_params *rparam)
+void (*release_appl)(struct capi_ctr *ctrlr, u16 applid)
+	pointers to callback functions for registration and deregistration of
+	applications with the device
+
+u16  (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb)
+	pointer to a callback function for sending a CAPI message to the
+	device
+
+char *(*procinfo)(struct capi_ctr *ctrlr)
+	pointer to a callback function returning the entry for the device in
+	the CAPI controller info table, /proc/capi/controller
+
+read_proc_t *ctr_read_proc
+	pointer to the read_proc callback function for the device's proc file
+	system entry, /proc/capi/controllers/<n>; will be called with a
+	pointer to the device's capi_ctr structure as the last (data) argument
+
+- to be filled in before calling capi_ctr_ready():
+
+u8 manu[CAPI_MANUFACTURER_LEN]
+	value to return for CAPI_GET_MANUFACTURER
+
+capi_version version
+	value to return for CAPI_GET_VERSION
+
+capi_profile profile
+	value to return for CAPI_GET_PROFILE
+
+u8 serial[CAPI_SERIAL_LEN]
+	value to return for CAPI_GET_SERIAL
+
+
+5. Lower Layer Interface Functions
+
+(declared in <linux/isdn/capilli.h>)
+
+void register_capi_driver(struct capi_driver *drvr)
+void unregister_capi_driver(struct capi_driver *drvr)
+	register/unregister a driver with Kernel CAPI
+
+int attach_capi_ctr(struct capi_ctr *ctrlr)
+int detach_capi_ctr(struct capi_ctr *ctrlr)
+	register/unregister a device (controller) with Kernel CAPI
+
+void capi_ctr_ready(struct capi_ctr *ctrlr)
+void capi_ctr_reseted(struct capi_ctr *ctrlr)
+	signal controller ready/not ready
+
+void capi_ctr_suspend_output(struct capi_ctr *ctrlr)
+void capi_ctr_resume_output(struct capi_ctr *ctrlr)
+	signal suspend/resume
+
+void capi_ctr_handle_message(struct capi_ctr * ctrlr, u16 applid,
+				struct sk_buff *skb)
+	pass a received CAPI message to Kernel CAPI
+	for forwarding to the specified application
+
+
+6. Helper Functions and Macros
+
+Library functions (from <linux/isdn/capilli.h>):
+
+void capilib_new_ncci(struct list_head *head, u16 applid,
+			u32 ncci, u32 winsize)
+void capilib_free_ncci(struct list_head *head, u16 applid, u32 ncci)
+void capilib_release_appl(struct list_head *head, u16 applid)
+void capilib_release(struct list_head *head)
+void capilib_data_b3_conf(struct list_head *head, u16 applid,
+			u32 ncci, u16 msgid)
+u16  capilib_data_b3_req(struct list_head *head, u16 applid,
+			u32 ncci, u16 msgid)
+
+
+Macros to extract/set element values from/in a CAPI message header
+(from <linux/isdn/capiutil.h>):
+
+Get Macro		Set Macro			Element (Type)
+
+CAPIMSG_LEN(m)		CAPIMSG_SETLEN(m, len)		Total Length (u16)
+CAPIMSG_APPID(m)	CAPIMSG_SETAPPID(m, applid)	ApplID (u16)
+CAPIMSG_COMMAND(m)	CAPIMSG_SETCOMMAND(m,cmd)	Command (u8)
+CAPIMSG_SUBCOMMAND(m)	CAPIMSG_SETSUBCOMMAND(m, cmd)	Subcommand (u8)
+CAPIMSG_CMD(m)		-				Command*256
+							+ Subcommand (u16)
+CAPIMSG_MSGID(m)	CAPIMSG_SETMSGID(m, msgid)	Message Number (u16)
+
+CAPIMSG_CONTROL(m)	CAPIMSG_SETCONTROL(m, contr)	Controller/PLCI/NCCI
+							(u32)
+CAPIMSG_DATALEN(m)	CAPIMSG_SETDATALEN(m, len)	Data Length (u16)
+

Documentation/kbuild/makefiles.txt

@@ -316,6 +316,16 @@ more details, with real examples.
 		#arch/m68k/fpsp040/Makefile
 		ldflags-y := -x
 
+    subdir-ccflags-y, subdir-asflags-y
+	The two flags listed above are similar to ccflags-y and as-falgs-y.
+	The difference is that the subdir- variants has effect for the kbuild
+	file where tey are present and all subdirectories.
+	Options specified using subdir-* are added to the commandline before
+	the options specified using the non-subdir variants.
+
+	Example:
+		subdir-ccflags-y := -Werror
+
     CFLAGS_$@, AFLAGS_$@
 
 	CFLAGS_$@ and AFLAGS_$@ only apply to commands in current

Documentation/kernel-doc-nano-HOWTO.txt

@@ -269,7 +269,10 @@ Use the argument mechanism to document members or constants.
 
 Inside a struct description, you can use the "private:" and "public:"
 comment tags.  Structure fields that are inside a "private:" area
-are not listed in the generated output documentation.
+are not listed in the generated output documentation.  The "private:"
+and "public:" tags must begin immediately following a "/*" comment
+marker.  They may optionally include comments between the ":" and the
+ending "*/" marker.
 
 Example:
 
@@ -283,7 +286,7 @@ Example:
 struct my_struct {
     int a;
     int b;
-/* private: */
+/* private: internal use only */
     int c;
 };
 

Documentation/kernel-parameters.txt

@@ -134,7 +134,7 @@ and is between 256 and 4096 characters. It is defined in the file
 ./include/asm/setup.h as COMMAND_LINE_SIZE.
 
 
-	acpi=		[HW,ACPI,X86-64,i386]
+	acpi=		[HW,ACPI,X86]
 			Advanced Configuration and Power Interface
 			Format: { force | off | ht | strict | noirq | rsdt }
 			force -- enable ACPI if default was off
@@ -218,7 +218,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			acpi_osi="!string2"	# remove built-in string2
 			acpi_osi=		# disable all strings
 
-	acpi_pm_good	[X86-32,X86-64]
+	acpi_pm_good	[X86]
 			Override the pmtimer bug detection: force the kernel
 			to assume that this machine's pmtimer latches its value
 			and always returns good values.
@@ -231,6 +231,35 @@ and is between 256 and 4096 characters. It is defined in the file
  			power state again in power transition.
  			1 : disable the power state check
 
+	acpi_sci=	[HW,ACPI] ACPI System Control Interrupt trigger mode
+			Format: { level | edge | high | low }
+
+	acpi_serialize	[HW,ACPI] force serialization of AML methods
+
+	acpi_skip_timer_override [HW,ACPI]
+			Recognize and ignore IRQ0/pin2 Interrupt Override.
+			For broken nForce2 BIOS resulting in XT-PIC timer.
+
+	acpi_sleep=	[HW,ACPI] Sleep options
+			Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,
+				  old_ordering, s4_nonvs }
+			See Documentation/power/video.txt for information on
+			s3_bios and s3_mode.
+			s3_beep is for debugging; it makes the PC's speaker beep
+			as soon as the kernel's real-mode entry point is called.
+			s4_nohwsig prevents ACPI hardware signature from being
+			used during resume from hibernation.
+			old_ordering causes the ACPI 1.0 ordering of the _PTS
+			control method, with respect to putting devices into
+			low power states, to be enforced (the ACPI 2.0 ordering
+			of _PTS is used by default).
+			s4_nonvs prevents the kernel from saving/restoring the
+			ACPI NVS memory during hibernation.
+
+	acpi_use_timer_override [HW,ACPI]
+			Use timer override. For some broken Nvidia NF5 boards
+			that require a timer override, but don't have HPET
+
 	acpi_enforce_resources=	[ACPI]
 			{ strict | lax | no }
 			Check for resource conflicts between native drivers
@@ -250,6 +279,9 @@ and is between 256 and 4096 characters. It is defined in the file
 	ad1848=		[HW,OSS]
 			Format: <io>,<irq>,<dma>,<dma2>,<type>
 
+	add_efi_memmap	[EFI; X86] Include EFI memory map in
+			kernel's map of available physical RAM.
+
 	advansys=	[HW,SCSI]
 			See header of drivers/scsi/advansys.c.
 
@@ -459,7 +491,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			Also note the kernel might malfunction if you disable
 			some critical bits.
 
-	code_bytes	[IA32/X86_64] How many bytes of object code to print
+	code_bytes	[X86] How many bytes of object code to print
 			in an oops report.
 			Range: 0 - 8192
 			Default: 64
@@ -592,7 +624,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			MTRR settings.  This parameter disables that behavior,
 			possibly causing your machine to run very slowly.
 
-	disable_timer_pin_1 [i386,x86-64]
+	disable_timer_pin_1 [X86]
 			Disable PIN 1 of APIC timer
 			Can be useful to work around chipset bugs.
 
@@ -624,7 +656,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			UART at the specified I/O port or MMIO address.
 			The options are the same as for ttyS, above.
 
-	earlyprintk=	[X86-32,X86-64,SH,BLACKFIN]
+	earlyprintk=	[X86,SH,BLACKFIN]
 			earlyprintk=vga
 			earlyprintk=serial[,ttySn[,baudrate]]
 			earlyprintk=dbgp
@@ -659,7 +691,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			See Documentation/block/as-iosched.txt and
 			Documentation/block/deadline-iosched.txt for details.
 
-	elfcorehdr=	[IA64,PPC,SH,X86-32,X86_64]
+	elfcorehdr=	[IA64,PPC,SH,X86]
 			Specifies physical address of start of kernel core
 			image elf header. Generally kexec loader will
 			pass this option to capture kernel.
@@ -938,7 +970,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			See comment before marvel_specify_io7 in
 			arch/alpha/kernel/core_marvel.c.
 
-	io_delay=	[X86-32,X86-64] I/O delay method
+	io_delay=	[X86] I/O delay method
 		0x80
 			Standard port 0x80 based delay
 		0xed
@@ -1000,7 +1032,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	keepinitrd	[HW,ARM]
 
-	kernelcore=nn[KMG]	[KNL,X86-32,IA-64,PPC,X86-64] This parameter
+	kernelcore=nn[KMG]	[KNL,X86,IA-64,PPC] This parameter
 			specifies the amount of memory usable by the kernel
 			for non-movable allocations.  The requested amount is
 			spread evenly throughout all nodes in the system. The
@@ -1034,7 +1066,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			Configure the RouterBoard 532 series on-chip
 			Ethernet adapter MAC address.
 
-	kstack=N	[X86-32,X86-64] Print N words from the kernel stack
+	kstack=N	[X86] Print N words from the kernel stack
 			in oops dumps.
 
 	l2cr=		[PPC]
@@ -1044,7 +1076,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	lapic		[X86-32,APIC] Enable the local APIC even if BIOS
 			disabled it.
 
-	lapic_timer_c2_ok	[X86-32,x86-64,APIC] trust the local apic timer
+	lapic_timer_c2_ok	[X86,APIC] trust the local apic timer
 			in C2 power state.
 
 	libata.dma=	[LIBATA] DMA control
@@ -1229,7 +1261,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			[KNL,SH] Allow user to override the default size for
 			per-device physically contiguous DMA buffers.
 
-	memmap=exactmap	[KNL,X86-32,X86_64] Enable setting of an exact
+	memmap=exactmap	[KNL,X86] Enable setting of an exact
 			E820 memory map, as specified by the user.
 			Such memmap=exactmap lines can be constructed based on
 			BIOS output or other requirements. See the memmap=nn@ss
@@ -1320,7 +1352,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	mousedev.yres=	[MOUSE] Vertical screen resolution, used for devices
 			reporting absolute coordinates, such as tablets
 
-	movablecore=nn[KMG]	[KNL,X86-32,IA-64,PPC,X86-64] This parameter
+	movablecore=nn[KMG]	[KNL,X86,IA-64,PPC] This parameter
 			is similar to kernelcore except it specifies the
 			amount of memory used for migratable allocations.
 			If both kernelcore and movablecore is specified,
@@ -1422,7 +1454,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			when a NMI is triggered.
 			Format: [state][,regs][,debounce][,die]
 
-	nmi_watchdog=	[KNL,BUGS=X86-32,X86-64] Debugging features for SMP kernels
+	nmi_watchdog=	[KNL,BUGS=X86] Debugging features for SMP kernels
 			Format: [panic,][num]
 			Valid num: 0,1,2
 			0 - turn nmi_watchdog off
@@ -1475,11 +1507,11 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	nodsp		[SH] Disable hardware DSP at boot time.
 
-	noefi		[X86-32,X86-64] Disable EFI runtime services support.
+	noefi		[X86] Disable EFI runtime services support.
 
 	noexec		[IA-64]
 
-	noexec		[X86-32,X86-64]
+	noexec		[X86]
 			On X86-32 available only on PAE configured kernels.
 			noexec=on: enable non-executable mappings (default)
 			noexec=off: disable non-executable mappings
@@ -1525,7 +1557,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	noirqdebug	[X86-32] Disables the code which attempts to detect and
 			disable unhandled interrupt sources.
 
-	no_timer_check	[X86-32,X86_64,APIC] Disables the code which tests for
+	no_timer_check	[X86,APIC] Disables the code which tests for
 			broken timer IRQ sources.
 
 	noisapnp	[ISAPNP] Disables ISA PnP code.
@@ -1588,6 +1620,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	nowb		[ARM]
 
+	nox2apic	[X86-64,APIC] Do not enable x2APIC mode.
+
 	nptcg=		[IA64] Override max number of concurrent global TLB
 			purges which is reported from either PAL_VM_SUMMARY or
 			SAL PALO.
@@ -1689,7 +1723,7 @@ and is between 256 and 4096 characters. It is defined in the file
 				disable the use of PCIE advanced error reporting.
 		nodomains	[PCI] Disable support for multiple PCI
 				root domains (aka PCI segments, in ACPI-speak).
-		nommconf	[X86-32,X86_64] Disable use of MMCONFIG for PCI
+		nommconf	[X86] Disable use of MMCONFIG for PCI
 				Configuration
 		nomsi		[MSI] If the PCI_MSI kernel config parameter is
 				enabled, this kernel boot option can be used to
@@ -1838,6 +1872,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			autoconfiguration.
 			Ranges are in pairs (memory base and size).
 
+	ports=		[IP_VS_FTP] IPVS ftp helper module
+			Default is 21.
+			Up to 8 (IP_VS_APP_MAX_PORTS) ports
+			may be specified.
+			Format: <port>,<port>....
+
 	print-fatal-signals=
 			[KNL] debug: print fatal signals
 			print-fatal-signals=1: print segfault info to
@@ -2380,7 +2420,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			reported either.
 
 	unknown_nmi_panic
-			[X86-32,X86-64]
+			[X86]
 			Set unknown_nmi_panic=1 early on boot.
 
 	usbcore.autosuspend=
@@ -2447,12 +2487,12 @@ and is between 256 and 4096 characters. It is defined in the file
 					medium is write-protected).
 			Example: quirks=0419:aaf5:rl,0421:0433:rc
 
-	vdso=		[X86-32,SH,x86-64]
+	vdso=		[X86,SH]
 			vdso=2: enable compat VDSO (default with COMPAT_VDSO)
 			vdso=1: enable VDSO (default)
 			vdso=0: disable VDSO mapping
 
-	vdso32=		[X86-32,X86-64]
+	vdso32=		[X86]
 			vdso32=2: enable compat VDSO (default with COMPAT_VDSO)
 			vdso32=1: enable 32-bit VDSO (default)
 			vdso32=0: disable 32-bit VDSO mapping

Documentation/laptops/thinkpad-acpi.txt

@@ -1,7 +1,7 @@
 		     ThinkPad ACPI Extras Driver
 
-                            Version 0.22
-                        November 23rd,  2008
+                            Version 0.23
+                          April 10th, 2009
 
                Borislav Deianov <borislav@users.sf.net>
              Henrique de Moraes Holschuh <hmh@hmh.eng.br>

Documentation/lguest/.gitignore

@@ -0,0 +1 @@
+lguest

Documentation/lguest/lguest.txt

@@ -3,11 +3,11 @@
  /,    /`      - or, A Young Coder's Illustrated Hypervisor
  \\"--\\    http://lguest.ozlabs.org
 
-Lguest is designed to be a minimal hypervisor for the Linux kernel, for
-Linux developers and users to experiment with virtualization with the
-minimum of complexity.  Nonetheless, it should have sufficient
-features to make it useful for specific tasks, and, of course, you are
-encouraged to fork and enhance it (see drivers/lguest/README).
+Lguest is designed to be a minimal 32-bit x86 hypervisor for the Linux kernel,
+for Linux developers and users to experiment with virtualization with the
+minimum of complexity.  Nonetheless, it should have sufficient features to
+make it useful for specific tasks, and, of course, you are encouraged to fork
+and enhance it (see drivers/lguest/README).
 
 Features:
 
@@ -37,6 +37,7 @@ Running Lguest:
      "Paravirtualized guest support" = Y
         "Lguest guest support" = Y
      "High Memory Support" = off/4GB
+     "PAE (Physical Address Extension) Support" = N
      "Alignment value to which kernel should be aligned" = 0x100000
         (CONFIG_PARAVIRT=y, CONFIG_LGUEST_GUEST=y, CONFIG_HIGHMEM64G=n and
          CONFIG_PHYSICAL_ALIGN=0x100000)

Documentation/lockdep-design.txt

@@ -54,9 +54,9 @@ locking error messages, inside curlies. A contrived example:
 The bit position indicates STATE, STATE-read, for each of the states listed
 above, and the character displayed in each indicates:
 
-   '.'  acquired while irqs disabled
-   '+'  acquired in irq context
-   '-'  acquired with irqs enabled
+   '.'  acquired while irqs disabled and not in irq context
+   '-'  acquired in irq context
+   '+'  acquired with irqs enabled
    '?'  acquired in irq context with irqs enabled.
 
 Unused mutexes cannot be part of the cause of an error.

Documentation/logo.txt

@@ -1,4 +1,13 @@
-Tux is taking a three month sabbatical to work as a barber, so Tuz is
-standing in.  He's taken pains to ensure you'll hardly notice.
+This is the full-colour version of the currently unofficial Linux logo
+("currently unofficial" just means that there has been no paperwork and
+that I have not really announced it yet).  It was created by Larry Ewing,
+and is freely usable as long as you acknowledge Larry as the original
+artist. 
+
+Note that there are black-and-white versions of this available that
+scale down to smaller sizes and are better for letterheads or whatever
+you want to use it for: for the full range of logos take a look at
+Larry's web-page:
+
+	http://www.isc.tamu.edu/~lewing/linux/
 
-Image by Andrew McGown and Josh Bush.  Image is licensed CC BY-SA.

Documentation/networking/bonding.txt

@@ -1242,7 +1242,7 @@ monitoring is enabled, and vice-versa.
 To add ARP targets:
 # echo +192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target
 # echo +192.168.0.101 > /sys/class/net/bond0/bonding/arp_ip_target
-	NOTE:  up to 10 target addresses may be specified.
+	NOTE:  up to 16 target addresses may be specified.
 
 To remove an ARP target:
 # echo -192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target

Documentation/powerpc/booting-without-of.txt

@@ -43,12 +43,11 @@ Table of Contents
     2) Representing devices without a current OF specification
       a) PHY nodes
       b) Interrupt controllers
-      c) CFI or JEDEC memory-mapped NOR flash
-      d) 4xx/Axon EMAC ethernet nodes
-      e) Xilinx IP cores
-      f) USB EHCI controllers
-      g) MDIO on GPIOs
-      h) SPI busses
+      c) 4xx/Axon EMAC ethernet nodes
+      d) Xilinx IP cores
+      e) USB EHCI controllers
+      f) MDIO on GPIOs
+      g) SPI busses
 
   VII - Marvell Discovery mv64[345]6x System Controller chips
     1) The /system-controller node
@@ -999,7 +998,7 @@ compatibility.
       translation of SOC addresses for memory mapped SOC registers.
     - bus-frequency: Contains the bus frequency for the SOC node.
       Typically, the value of this field is filled in by the boot
-      loader. 
+      loader.
 
 
   Recommended properties:
@@ -1287,71 +1286,7 @@ platforms are moved over to use the flattened-device-tree model.
 		device_type = "open-pic";
 	};
 
-   c) CFI or JEDEC memory-mapped NOR flash
-
-    Flash chips (Memory Technology Devices) are often used for solid state
-    file systems on embedded devices.
-
-     - compatible : should contain the specific model of flash chip(s)
-       used, if known, followed by either "cfi-flash" or "jedec-flash"
-     - reg : Address range of the flash chip
-     - bank-width : Width (in bytes) of the flash bank.  Equal to the
-       device width times the number of interleaved chips.
-     - device-width : (optional) Width of a single flash chip.  If
-       omitted, assumed to be equal to 'bank-width'.
-     - #address-cells, #size-cells : Must be present if the flash has
-       sub-nodes representing partitions (see below).  In this case
-       both #address-cells and #size-cells must be equal to 1.
-
-    For JEDEC compatible devices, the following additional properties
-    are defined:
-
-     - vendor-id : Contains the flash chip's vendor id (1 byte).
-     - device-id : Contains the flash chip's device id (1 byte).
-
-    In addition to the information on the flash bank itself, the
-    device tree may optionally contain additional information
-    describing partitions of the flash address space.  This can be
-    used on platforms which have strong conventions about which
-    portions of the flash are used for what purposes, but which don't
-    use an on-flash partition table such as RedBoot.
-
-    Each partition is represented as a sub-node of the flash device.
-    Each node's name represents the name of the corresponding
-    partition of the flash device.
-
-    Flash partitions
-     - reg : The partition's offset and size within the flash bank.
-     - label : (optional) The label / name for this flash partition.
-       If omitted, the label is taken from the node name (excluding
-       the unit address).
-     - read-only : (optional) This parameter, if present, is a hint to
-       Linux that this flash partition should only be mounted
-       read-only.  This is usually used for flash partitions
-       containing early-boot firmware images or data which should not
-       be clobbered.
-
-    Example:
-
-	flash@ff000000 {
-		compatible = "amd,am29lv128ml", "cfi-flash";
-		reg = <ff000000 01000000>;
-		bank-width = <4>;
-		device-width = <1>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		fs@0 {
-			label = "fs";
-			reg = <0 f80000>;
-		};
-		firmware@f80000 {
-			label ="firmware";
-			reg = <f80000 80000>;
-			read-only;
-		};
-	};
-
-    d) 4xx/Axon EMAC ethernet nodes
+    c) 4xx/Axon EMAC ethernet nodes
 
     The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
     the Axon bridge.  To operate this needs to interact with a ths
@@ -1499,7 +1434,7 @@ platforms are moved over to use the flattened-device-tree model.
 			   available.
 			   For Axon: 0x0000012a
 
-   e) Xilinx IP cores
+   d) Xilinx IP cores
 
    The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
    in Xilinx Spartan and Virtex FPGAs.  The devices cover the whole range
@@ -1761,7 +1696,7 @@ platforms are moved over to use the flattened-device-tree model.
       listed above, nodes for these devices should include a phy-handle
       property, and may include other common network device properties
       like local-mac-address.
-      
+
       iv) Xilinx Uartlite
 
       Xilinx uartlite devices are simple fixed speed serial ports.
@@ -1793,7 +1728,7 @@ platforms are moved over to use the flattened-device-tree model.
        - reg-offset : A value of 3 is required
        - reg-shift : A value of 2 is required
 
-    f) USB EHCI controllers
+    e) USB EHCI controllers
 
     Required properties:
       - compatible : should be "usb-ehci".
@@ -1819,7 +1754,7 @@ platforms are moved over to use the flattened-device-tree model.
 		   big-endian;
 	   };
 
-   g) MDIO on GPIOs
+   f) MDIO on GPIOs
 
    Currently defined compatibles:
    - virtual,gpio-mdio
@@ -1839,7 +1774,7 @@ platforms are moved over to use the flattened-device-tree model.
 			 &qe_pio_c 6>;
 	};
 
-    h) SPI (Serial Peripheral Interface) busses
+    g) SPI (Serial Peripheral Interface) busses
 
     SPI busses can be described with a node for the SPI master device
     and a set of child nodes for each SPI slave on the bus.  For this

Documentation/powerpc/dts-bindings/fsl/i2c.txt

@@ -7,8 +7,10 @@ Required properties :
 
 Recommended properties :
 
- - compatible : Should be "fsl-i2c" for parts compatible with
-   Freescale I2C specifications.
+ - compatible : compatibility list with 2 entries, the first should
+   be "fsl,CHIP-i2c" where CHIP is the name of a compatible processor,
+   e.g. mpc8313, mpc8543, mpc8544, mpc5200 or mpc5200b. The second one
+   should be "fsl-i2c".
  - interrupts : <a b> where a is the interrupt number and b is a
    field that represents an encoding of the sense and level
    information for the interrupt.  This should be encoded based on
@@ -16,17 +18,31 @@ Recommended properties :
    controller you have.
  - interrupt-parent : the phandle for the interrupt controller that
    services interrupts for this device.
- - dfsrr : boolean; if defined, indicates that this I2C device has
-   a digital filter sampling rate register
- - fsl5200-clocking : boolean; if defined, indicated that this device
-   uses the FSL 5200 clocking mechanism.
-
-Example :
-	i2c@3000 {
-		interrupt-parent = <40000>;
-		interrupts = <1b 3>;
-		reg = <3000 18>;
-		device_type = "i2c";
-		compatible  = "fsl-i2c";
-		dfsrr;
+ - fsl,preserve-clocking : boolean; if defined, the clock settings
+   from the bootloader are preserved (not touched).
+ - clock-frequency : desired I2C bus clock frequency in Hz.
+
+Examples :
+
+	i2c@3d00 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+		cell-index = <0>;
+		reg = <0x3d00 0x40>;
+		interrupts = <2 15 0>;
+		interrupt-parent = <&mpc5200_pic>;
+		fsl,preserve-clocking;
 	};
+
+	i2c@3100 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cell-index = <1>;
+		compatible = "fsl,mpc8544-i2c", "fsl-i2c";
+		reg = <0x3100 0x100>;
+		interrupts = <43 2>;
+		interrupt-parent = <&mpic>;
+		clock-frequency = <400000>;
+	};
+

Documentation/powerpc/dts-bindings/mtd-physmap.txt

@@ -0,0 +1,80 @@
+CFI or JEDEC memory-mapped NOR flash
+
+Flash chips (Memory Technology Devices) are often used for solid state
+file systems on embedded devices.
+
+ - compatible : should contain the specific model of flash chip(s)
+   used, if known, followed by either "cfi-flash" or "jedec-flash"
+ - reg : Address range(s) of the flash chip(s)
+   It's possible to (optionally) define multiple "reg" tuples so that
+   non-identical NOR chips can be described in one flash node.
+ - bank-width : Width (in bytes) of the flash bank.  Equal to the
+   device width times the number of interleaved chips.
+ - device-width : (optional) Width of a single flash chip.  If
+   omitted, assumed to be equal to 'bank-width'.
+ - #address-cells, #size-cells : Must be present if the flash has
+   sub-nodes representing partitions (see below).  In this case
+   both #address-cells and #size-cells must be equal to 1.
+
+For JEDEC compatible devices, the following additional properties
+are defined:
+
+ - vendor-id : Contains the flash chip's vendor id (1 byte).
+ - device-id : Contains the flash chip's device id (1 byte).
+
+In addition to the information on the flash bank itself, the
+device tree may optionally contain additional information
+describing partitions of the flash address space.  This can be
+used on platforms which have strong conventions about which
+portions of the flash are used for what purposes, but which don't
+use an on-flash partition table such as RedBoot.
+
+Each partition is represented as a sub-node of the flash device.
+Each node's name represents the name of the corresponding
+partition of the flash device.
+
+Flash partitions
+ - reg : The partition's offset and size within the flash bank.
+ - label : (optional) The label / name for this flash partition.
+   If omitted, the label is taken from the node name (excluding
+   the unit address).
+ - read-only : (optional) This parameter, if present, is a hint to
+   Linux that this flash partition should only be mounted
+   read-only.  This is usually used for flash partitions
+   containing early-boot firmware images or data which should not
+   be clobbered.
+
+Example:
+
+	flash@ff000000 {
+		compatible = "amd,am29lv128ml", "cfi-flash";
+		reg = <ff000000 01000000>;
+		bank-width = <4>;
+		device-width = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		fs@0 {
+			label = "fs";
+			reg = <0 f80000>;
+		};
+		firmware@f80000 {
+			label ="firmware";
+			reg = <f80000 80000>;
+			read-only;
+		};
+	};
+
+Here an example with multiple "reg" tuples:
+
+	flash@f0000000,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "intel,PC48F4400P0VB", "cfi-flash";
+		reg = <0 0x00000000 0x02000000
+		       0 0x02000000 0x02000000>;
+		bank-width = <2>;
+		partition@0 {
+			label = "test-part1";
+			reg = <0 0x04000000>;
+		};
+	};

Documentation/sound/alsa/HD-Audio.txt

@@ -169,7 +169,7 @@ PCI SSID look-up.
 What `model` option values are available depends on the codec chip.
 Check your codec chip from the codec proc file (see "Codec Proc-File"
 section below).  It will show the vendor/product name of your codec
-chip.  Then, see Documentation/sound/alsa/HD-Audio-Modelstxt file,
+chip.  Then, see Documentation/sound/alsa/HD-Audio-Models.txt file,
 the section of HD-audio driver.  You can find a list of codecs
 and `model` options belonging to each codec.  For example, for Realtek
 ALC262 codec chip, pass `model=ultra` for devices that are compatible
@@ -177,7 +177,7 @@ with Samsung Q1 Ultra.
 
 Thus, the first thing you can do for any brand-new, unsupported and
 non-working HD-audio hardware is to check HD-audio codec and several
-different `model` option values.  If you have a luck, some of them
+different `model` option values.  If you have any luck, some of them
 might suit with your device well.
 
 Some codecs such as ALC880 have a special model option `model=test`.

Documentation/spi/spi-summary

@@ -511,10 +511,16 @@ SPI MASTER METHODS
 	This sets up the device clock rate, SPI mode, and word sizes.
 	Drivers may change the defaults provided by board_info, and then
 	call spi_setup(spi) to invoke this routine.  It may sleep.
+
 	Unless each SPI slave has its own configuration registers, don't
 	change them right away ... otherwise drivers could corrupt I/O
 	that's in progress for other SPI devices.
 
+		** BUG ALERT:  for some reason the first version of
+		** many spi_master drivers seems to get this wrong.
+		** When you code setup(), ASSUME that the controller
+		** is actively processing transfers for another device.
+
     master->transfer(struct spi_device *spi, struct spi_message *message)
     	This must not sleep.  Its responsibility is arrange that the
 	transfer happens and its complete() callback is issued.  The two

Documentation/sysctl/net.txt

@@ -95,7 +95,7 @@ of struct cmsghdr structures with appended data.
 
 There is only one file in this directory.
 unix_dgram_qlen limits the max number of datagrams queued in Unix domain
-socket's buffer. It will not take effect unless PF_UNIX flag is spicified.
+socket's buffer. It will not take effect unless PF_UNIX flag is specified.
 
 
 3. /proc/sys/net/ipv4 - IPV4 settings

Documentation/sysctl/vm.txt

@@ -90,6 +90,10 @@ will itself start writeback.
 If dirty_bytes is written, dirty_ratio becomes a function of its value
 (dirty_bytes / the amount of dirtyable system memory).
 
+Note: the minimum value allowed for dirty_bytes is two pages (in bytes); any
+value lower than this limit will be ignored and the old configuration will be
+retained.
+
 ==============================================================
 
 dirty_expire_centisecs

Documentation/tomoyo.txt

@@ -0,0 +1,55 @@
+--- What is TOMOYO? ---
+
+TOMOYO is a name-based MAC extension (LSM module) for the Linux kernel.
+
+LiveCD-based tutorials are available at
+http://tomoyo.sourceforge.jp/en/1.6.x/1st-step/ubuntu8.04-live/
+http://tomoyo.sourceforge.jp/en/1.6.x/1st-step/centos5-live/ .
+Though these tutorials use non-LSM version of TOMOYO, they are useful for you
+to know what TOMOYO is.
+
+--- How to enable TOMOYO? ---
+
+Build the kernel with CONFIG_SECURITY_TOMOYO=y and pass "security=tomoyo" on
+kernel's command line.
+
+Please see http://tomoyo.sourceforge.jp/en/2.2.x/ for details.
+
+--- Where is documentation? ---
+
+User <-> Kernel interface documentation is available at
+http://tomoyo.sourceforge.jp/en/2.2.x/policy-reference.html .
+
+Materials we prepared for seminars and symposiums are available at
+http://sourceforge.jp/projects/tomoyo/docs/?category_id=532&language_id=1 .
+Below lists are chosen from three aspects.
+
+What is TOMOYO?
+  TOMOYO Linux Overview
+    http://sourceforge.jp/projects/tomoyo/docs/lca2009-takeda.pdf
+  TOMOYO Linux: pragmatic and manageable security for Linux
+    http://sourceforge.jp/projects/tomoyo/docs/freedomhectaipei-tomoyo.pdf
+  TOMOYO Linux: A Practical Method to Understand and Protect Your Own Linux Box
+    http://sourceforge.jp/projects/tomoyo/docs/PacSec2007-en-no-demo.pdf
+
+What can TOMOYO do?
+  Deep inside TOMOYO Linux
+    http://sourceforge.jp/projects/tomoyo/docs/lca2009-kumaneko.pdf
+  The role of "pathname based access control" in security.
+    http://sourceforge.jp/projects/tomoyo/docs/lfj2008-bof.pdf
+
+History of TOMOYO?
+  Realities of Mainlining
+    http://sourceforge.jp/projects/tomoyo/docs/lfj2008.pdf
+
+--- What is future plan? ---
+
+We believe that inode based security and name based security are complementary
+and both should be used together. But unfortunately, so far, we cannot enable
+multiple LSM modules at the same time. We feel sorry that you have to give up
+SELinux/SMACK/AppArmor etc. when you want to use TOMOYO.
+
+We hope that LSM becomes stackable in future. Meanwhile, you can use non-LSM
+version of TOMOYO, available at http://tomoyo.sourceforge.jp/en/1.6.x/ .
+LSM version of TOMOYO is a subset of non-LSM version of TOMOYO. We are planning
+to port non-LSM version's functionalities to LSM versions.

Documentation/vm/00-INDEX

@@ -1,5 +1,7 @@
 00-INDEX
 	- this file.
+active_mm.txt
+	- An explanation from Linus about tsk->active_mm vs tsk->mm.
 balance
 	- various information on memory balancing.
 hugetlbpage.txt

Documentation/vm/active_mm.txt

@@ -0,0 +1,83 @@
+List:       linux-kernel
+Subject:    Re: active_mm
+From:       Linus Torvalds <torvalds () transmeta ! com>
+Date:       1999-07-30 21:36:24
+
+Cc'd to linux-kernel, because I don't write explanations all that often,
+and when I do I feel better about more people reading them.
+
+On Fri, 30 Jul 1999, David Mosberger wrote:
+>
+> Is there a brief description someplace on how "mm" vs. "active_mm" in
+> the task_struct are supposed to be used?  (My apologies if this was
+> discussed on the mailing lists---I just returned from vacation and
+> wasn't able to follow linux-kernel for a while).
+
+Basically, the new setup is:
+
+ - we have "real address spaces" and "anonymous address spaces". The
+   difference is that an anonymous address space doesn't care about the
+   user-level page tables at all, so when we do a context switch into an
+   anonymous address space we just leave the previous address space
+   active.
+
+   The obvious use for a "anonymous address space" is any thread that
+   doesn't need any user mappings - all kernel threads basically fall into
+   this category, but even "real" threads can temporarily say that for
+   some amount of time they are not going to be interested in user space,
+   and that the scheduler might as well try to avoid wasting time on
+   switching the VM state around. Currently only the old-style bdflush
+   sync does that.
+
+ - "tsk->mm" points to the "real address space". For an anonymous process,
+   tsk->mm will be NULL, for the logical reason that an anonymous process
+   really doesn't _have_ a real address space at all.
+
+ - however, we obviously need to keep track of which address space we
+   "stole" for such an anonymous user. For that, we have "tsk->active_mm",
+   which shows what the currently active address space is.
+
+   The rule is that for a process with a real address space (ie tsk->mm is
+   non-NULL) the active_mm obviously always has to be the same as the real
+   one.
+
+   For a anonymous process, tsk->mm == NULL, and tsk->active_mm is the
+   "borrowed" mm while the anonymous process is running. When the
+   anonymous process gets scheduled away, the borrowed address space is
+   returned and cleared.
+
+To support all that, the "struct mm_struct" now has two counters: a
+"mm_users" counter that is how many "real address space users" there are,
+and a "mm_count" counter that is the number of "lazy" users (ie anonymous
+users) plus one if there are any real users.
+
+Usually there is at least one real user, but it could be that the real
+user exited on another CPU while a lazy user was still active, so you do
+actually get cases where you have a address space that is _only_ used by
+lazy users. That is often a short-lived state, because once that thread
+gets scheduled away in favour of a real thread, the "zombie" mm gets
+released because "mm_users" becomes zero.
+
+Also, a new rule is that _nobody_ ever has "init_mm" as a real MM any
+more. "init_mm" should be considered just a "lazy context when no other
+context is available", and in fact it is mainly used just at bootup when
+no real VM has yet been created. So code that used to check
+
+	if (current->mm == &init_mm)
+
+should generally just do
+
+	if (!current->mm)
+
+instead (which makes more sense anyway - the test is basically one of "do
+we have a user context", and is generally done by the page fault handler
+and things like that).
+
+Anyway, I put a pre-patch-2.3.13-1 on ftp.kernel.org just a moment ago,
+because it slightly changes the interfaces to accomodate the alpha (who
+would have thought it, but the alpha actually ends up having one of the
+ugliest context switch codes - unlike the other architectures where the MM
+and register state is separate, the alpha PALcode joins the two, and you
+need to switch both together).
+
+(From http://marc.info/?l=linux-kernel&m=93337278602211&w=2)

Documentation/vm/unevictable-lru.txt

@@ -1,588 +1,691 @@
-
-This document describes the Linux memory management "Unevictable LRU"
-infrastructure and the use of this infrastructure to manage several types
-of "unevictable" pages.  The document attempts to provide the overall
-rationale behind this mechanism and the rationale for some of the design
-decisions that drove the implementation.  The latter design rationale is
-discussed in the context of an implementation description.  Admittedly, one
-can obtain the implementation details--the "what does it do?"--by reading the
-code.  One hopes that the descriptions below add value by provide the answer
-to "why does it do that?".
-
-Unevictable LRU Infrastructure:
-
-The Unevictable LRU adds an additional LRU list to track unevictable pages
-and to hide these pages from vmscan.  This mechanism is based on a patch by
-Larry Woodman of Red Hat to address several scalability problems with page
+			==============================
+			UNEVICTABLE LRU INFRASTRUCTURE
+			==============================
+
+========
+CONTENTS
+========
+
+ (*) The Unevictable LRU
+
+     - The unevictable page list.
+     - Memory control group interaction.
+     - Marking address spaces unevictable.
+     - Detecting Unevictable Pages.
+     - vmscan's handling of unevictable pages.
+
+ (*) mlock()'d pages.
+
+     - History.
+     - Basic management.
+     - mlock()/mlockall() system call handling.
+     - Filtering special vmas.
+     - munlock()/munlockall() system call handling.
+     - Migrating mlocked pages.
+     - mmap(MAP_LOCKED) system call handling.
+     - munmap()/exit()/exec() system call handling.
+     - try_to_unmap().
+     - try_to_munlock() reverse map scan.
+     - Page reclaim in shrink_*_list().
+
+
+============
+INTRODUCTION
+============
+
+This document describes the Linux memory manager's "Unevictable LRU"
+infrastructure and the use of this to manage several types of "unevictable"
+pages.
+
+The document attempts to provide the overall rationale behind this mechanism
+and the rationale for some of the design decisions that drove the
+implementation.  The latter design rationale is discussed in the context of an
+implementation description.  Admittedly, one can obtain the implementation
+details - the "what does it do?" - by reading the code.  One hopes that the
+descriptions below add value by provide the answer to "why does it do that?".
+
+
+===================
+THE UNEVICTABLE LRU
+===================
+
+The Unevictable LRU facility adds an additional LRU list to track unevictable
+pages and to hide these pages from vmscan.  This mechanism is based on a patch
+by Larry Woodman of Red Hat to address several scalability problems with page
 reclaim in Linux.  The problems have been observed at customer sites on large
-memory x86_64 systems.  For example, a non-numal x86_64 platform with 128GB
-of main memory will have over 32 million 4k pages in a single zone.  When a
-large fraction of these pages are not evictable for any reason [see below],
-vmscan will spend a lot of time scanning the LRU lists looking for the small
-fraction of pages that are evictable.  This can result in a situation where
-all cpus are spending 100% of their time in vmscan for hours or days on end,
-with the system completely unresponsive.
-
-The Unevictable LRU infrastructure addresses the following classes of
-unevictable pages:
-
-+ page owned by ramfs
-+ page mapped into SHM_LOCKed shared memory regions
-+ page mapped into VM_LOCKED [mlock()ed] vmas
-
-The infrastructure might be able to handle other conditions that make pages
+memory x86_64 systems.
+
+To illustrate this with an example, a non-NUMA x86_64 platform with 128GB of
+main memory will have over 32 million 4k pages in a single zone.  When a large
+fraction of these pages are not evictable for any reason [see below], vmscan
+will spend a lot of time scanning the LRU lists looking for the small fraction
+of pages that are evictable.  This can result in a situation where all CPUs are
+spending 100% of their time in vmscan for hours or days on end, with the system
+completely unresponsive.
+
+The unevictable list addresses the following classes of unevictable pages:
+
+ (*) Those owned by ramfs.
+
+ (*) Those mapped into SHM_LOCK'd shared memory regions.
+
+ (*) Those mapped into VM_LOCKED [mlock()ed] VMAs.
+
+The infrastructure may also be able to handle other conditions that make pages
 unevictable, either by definition or by circumstance, in the future.
 
 
-The Unevictable LRU List
+THE UNEVICTABLE PAGE LIST
+-------------------------
 
 The Unevictable LRU infrastructure consists of an additional, per-zone, LRU list
 called the "unevictable" list and an associated page flag, PG_unevictable, to
-indicate that the page is being managed on the unevictable list.  The
-PG_unevictable flag is analogous to, and mutually exclusive with, the PG_active
-flag in that it indicates on which LRU list a page resides when PG_lru is set.
-The unevictable LRU list is source configurable based on the UNEVICTABLE_LRU
-Kconfig option.
+indicate that the page is being managed on the unevictable list.
+
+The PG_unevictable flag is analogous to, and mutually exclusive with, the
+PG_active flag in that it indicates on which LRU list a page resides when
+PG_lru is set.  The unevictable list is compile-time configurable based on the
+UNEVICTABLE_LRU Kconfig option.
 
 The Unevictable LRU infrastructure maintains unevictable pages on an additional
 LRU list for a few reasons:
 
-1) We get to "treat unevictable pages just like we treat other pages in the
-   system, which means we get to use the same code to manipulate them, the
-   same code to isolate them (for migrate, etc.), the same code to keep track
-   of the statistics, etc..." [Rik van Riel]
+ (1) We get to "treat unevictable pages just like we treat other pages in the
+     system - which means we get to use the same code to manipulate them, the
+     same code to isolate them (for migrate, etc.), the same code to keep track
+     of the statistics, etc..." [Rik van Riel]
+
+ (2) We want to be able to migrate unevictable pages between nodes for memory
+     defragmentation, workload management and memory hotplug.  The linux kernel
+     can only migrate pages that it can successfully isolate from the LRU
+     lists.  If we were to maintain pages elsewhere than on an LRU-like list,
+     where they can be found by isolate_lru_page(), we would prevent their
+     migration, unless we reworked migration code to find the unevictable pages
+     itself.
 
-2) We want to be able to migrate unevictable pages between nodes--for memory
-   defragmentation, workload management and memory hotplug.  The linux kernel
-   can only migrate pages that it can successfully isolate from the lru lists.
-   If we were to maintain pages elsewise than on an lru-like list, where they
-   can be found by isolate_lru_page(), we would prevent their migration, unless
-   we reworked migration code to find the unevictable pages.
 
+The unevictable list does not differentiate between file-backed and anonymous,
+swap-backed pages.  This differentiation is only important while the pages are,
+in fact, evictable.
 
-The unevictable LRU list does not differentiate between file backed and swap
-backed [anon] pages.  This differentiation is only important while the pages
-are, in fact, evictable.
+The unevictable list benefits from the "arrayification" of the per-zone LRU
+lists and statistics originally proposed and posted by Christoph Lameter.
 
-The unevictable LRU list benefits from the "arrayification" of the per-zone
-LRU lists and statistics originally proposed and posted by Christoph Lameter.
+The unevictable list does not use the LRU pagevec mechanism. Rather,
+unevictable pages are placed directly on the page's zone's unevictable list
+under the zone lru_lock.  This allows us to prevent the stranding of pages on
+the unevictable list when one task has the page isolated from the LRU and other
+tasks are changing the "evictability" state of the page.
 
-The unevictable list does not use the lru pagevec mechanism. Rather,
-unevictable pages are placed directly on the page's zone's unevictable
-list under the zone lru_lock.  The reason for this is to prevent stranding
-of pages on the unevictable list when one task has the page isolated from the
-lru and other tasks are changing the "evictability" state of the page.
 
+MEMORY CONTROL GROUP INTERACTION
+--------------------------------
 
-Unevictable LRU and Memory Controller Interaction
+The unevictable LRU facility interacts with the memory control group [aka
+memory controller; see Documentation/cgroups/memory.txt] by extending the
+lru_list enum.
+
+The memory controller data structure automatically gets a per-zone unevictable
+list as a result of the "arrayification" of the per-zone LRU lists (one per
+lru_list enum element).  The memory controller tracks the movement of pages to
+and from the unevictable list.
 
-The memory controller data structure automatically gets a per zone unevictable
-lru list as a result of the "arrayification" of the per-zone LRU lists.  The
-memory controller tracks the movement of pages to and from the unevictable list.
 When a memory control group comes under memory pressure, the controller will
 not attempt to reclaim pages on the unevictable list.  This has a couple of
-effects.  Because the pages are "hidden" from reclaim on the unevictable list,
-the reclaim process can be more efficient, dealing only with pages that have
-a chance of being reclaimed.  On the other hand, if too many of the pages
-charged to the control group are unevictable, the evictable portion of the
-working set of the tasks in the control group may not fit into the available
-memory.  This can cause the control group to thrash or to oom-kill tasks.
-
-
-Unevictable LRU:  Detecting Unevictable Pages
-
-The function page_evictable(page, vma) in vmscan.c determines whether a
-page is evictable or not.  For ramfs pages and pages in SHM_LOCKed regions,
-page_evictable() tests a new address space flag, AS_UNEVICTABLE, in the page's
-address space using a wrapper function.  Wrapper functions are used to set,
-clear and test the flag to reduce the requirement for #ifdef's throughout the
-source code.  AS_UNEVICTABLE is set on ramfs inode/mapping when it is created.
-This flag remains for the life of the inode.
-
-For shared memory regions, AS_UNEVICTABLE is set when an application
-successfully SHM_LOCKs the region and is removed when the region is
-SHM_UNLOCKed.  Note that shmctl(SHM_LOCK, ...) does not populate the page
-tables for the region as does, for example, mlock().   So, we make no special
-effort to push any pages in the SHM_LOCKed region to the unevictable list.
-Vmscan will do this when/if it encounters the pages during reclaim.  On
-SHM_UNLOCK, shmctl() scans the pages in the region and "rescues" them from the
-unevictable list if no other condition keeps them unevictable.  If a SHM_LOCKed
-region is destroyed, the pages are also "rescued" from the unevictable list in
-the process of freeing them.
-
-page_evictable() detects mlock()ed pages by testing an additional page flag,
-PG_mlocked via the PageMlocked() wrapper.  If the page is NOT mlocked, and a
-non-NULL vma is supplied, page_evictable() will check whether the vma is
+effects:
+
+ (1) Because the pages are "hidden" from reclaim on the unevictable list, the
+     reclaim process can be more efficient, dealing only with pages that have a
+     chance of being reclaimed.
+
+ (2) On the other hand, if too many of the pages charged to the control group
+     are unevictable, the evictable portion of the working set of the tasks in
+     the control group may not fit into the available memory.  This can cause
+     the control group to thrash or to OOM-kill tasks.
+
+
+MARKING ADDRESS SPACES UNEVICTABLE
+----------------------------------
+
+For facilities such as ramfs none of the pages attached to the address space
+may be evicted.  To prevent eviction of any such pages, the AS_UNEVICTABLE
+address space flag is provided, and this can be manipulated by a filesystem
+using a number of wrapper functions:
+
+ (*) void mapping_set_unevictable(struct address_space *mapping);
+
+	Mark the address space as being completely unevictable.
+
+ (*) void mapping_clear_unevictable(struct address_space *mapping);
+
+	Mark the address space as being evictable.
+
+ (*) int mapping_unevictable(struct address_space *mapping);
+
+	Query the address space, and return true if it is completely
+	unevictable.
+
+These are currently used in two places in the kernel:
+
+ (1) By ramfs to mark the address spaces of its inodes when they are created,
+     and this mark remains for the life of the inode.
+
+ (2) By SYSV SHM to mark SHM_LOCK'd address spaces until SHM_UNLOCK is called.
+
+     Note that SHM_LOCK is not required to page in the locked pages if they're
+     swapped out; the application must touch the pages manually if it wants to
+     ensure they're in memory.
+
+
+DETECTING UNEVICTABLE PAGES
+---------------------------
+
+The function page_evictable() in vmscan.c determines whether a page is
+evictable or not using the query function outlined above [see section "Marking
+address spaces unevictable"] to check the AS_UNEVICTABLE flag.
+
+For address spaces that are so marked after being populated (as SHM regions
+might be), the lock action (eg: SHM_LOCK) can be lazy, and need not populate
+the page tables for the region as does, for example, mlock(), nor need it make
+any special effort to push any pages in the SHM_LOCK'd area to the unevictable
+list.  Instead, vmscan will do this if and when it encounters the pages during
+a reclamation scan.
+
+On an unlock action (such as SHM_UNLOCK), the unlocker (eg: shmctl()) must scan
+the pages in the region and "rescue" them from the unevictable list if no other
+condition is keeping them unevictable.  If an unevictable region is destroyed,
+the pages are also "rescued" from the unevictable list in the process of
+freeing them.
+
+page_evictable() also checks for mlocked pages by testing an additional page
+flag, PG_mlocked (as wrapped by PageMlocked()).  If the page is NOT mlocked,
+and a non-NULL VMA is supplied, page_evictable() will check whether the VMA is
 VM_LOCKED via is_mlocked_vma().  is_mlocked_vma() will SetPageMlocked() and
 update the appropriate statistics if the vma is VM_LOCKED.  This method allows
 efficient "culling" of pages in the fault path that are being faulted in to
-VM_LOCKED vmas.
+VM_LOCKED VMAs.
 
 
-Unevictable Pages and Vmscan [shrink_*_list()]
+VMSCAN'S HANDLING OF UNEVICTABLE PAGES
+--------------------------------------
 
 If unevictable pages are culled in the fault path, or moved to the unevictable
-list at mlock() or mmap() time, vmscan will never encounter the pages until
-they have become evictable again, for example, via munlock() and have been
-"rescued" from the unevictable list.  However, there may be situations where we
-decide, for the sake of expediency, to leave a unevictable page on one of the
-regular active/inactive LRU lists for vmscan to deal with.  Vmscan checks for
-such pages in all of the shrink_{active|inactive|page}_list() functions and
-will "cull" such pages that it encounters--that is, it diverts those pages to
-the unevictable list for the zone being scanned.
-
-There may be situations where a page is mapped into a VM_LOCKED vma, but the
-page is not marked as PageMlocked.  Such pages will make it all the way to
+list at mlock() or mmap() time, vmscan will not encounter the pages until they
+have become evictable again (via munlock() for example) and have been "rescued"
+from the unevictable list.  However, there may be situations where we decide,
+for the sake of expediency, to leave a unevictable page on one of the regular
+active/inactive LRU lists for vmscan to deal with.  vmscan checks for such
+pages in all of the shrink_{active|inactive|page}_list() functions and will
+"cull" such pages that it encounters: that is, it diverts those pages to the
+unevictable list for the zone being scanned.
+
+There may be situations where a page is mapped into a VM_LOCKED VMA, but the
+page is not marked as PG_mlocked.  Such pages will make it all the way to
 shrink_page_list() where they will be detected when vmscan walks the reverse
-map in try_to_unmap().  If try_to_unmap() returns SWAP_MLOCK, shrink_page_list()
-will cull the page at that point.
+map in try_to_unmap().  If try_to_unmap() returns SWAP_MLOCK,
+shrink_page_list() will cull the page at that point.
 
-To "cull" an unevictable page, vmscan simply puts the page back on the lru
-list using putback_lru_page()--the inverse operation to isolate_lru_page()--
-after dropping the page lock.  Because the condition which makes the page
-unevictable may change once the page is unlocked, putback_lru_page() will
-recheck the unevictable state of a page that it places on the unevictable lru
-list.  If the page has become unevictable, putback_lru_page() removes it from
-the list and retries, including the page_unevictable() test.  Because such a
-race is a rare event and movement of pages onto the unevictable list should be
-rare, these extra evictabilty checks should not occur in the majority of calls
-to putback_lru_page().
+To "cull" an unevictable page, vmscan simply puts the page back on the LRU list
+using putback_lru_page() - the inverse operation to isolate_lru_page() - after
+dropping the page lock.  Because the condition which makes the page unevictable
+may change once the page is unlocked, putback_lru_page() will recheck the
+unevictable state of a page that it places on the unevictable list.  If the
+page has become unevictable, putback_lru_page() removes it from the list and
+retries, including the page_unevictable() test.  Because such a race is a rare
+event and movement of pages onto the unevictable list should be rare, these
+extra evictabilty checks should not occur in the majority of calls to
+putback_lru_page().
 
 
-Mlocked Page:  Prior Work
+=============
+MLOCKED PAGES
+=============
 
-The "Unevictable Mlocked Pages" infrastructure is based on work originally
+The unevictable page list is also useful for mlock(), in addition to ramfs and
+SYSV SHM.  Note that mlock() is only available in CONFIG_MMU=y situations; in
+NOMMU situations, all mappings are effectively mlocked.
+
+
+HISTORY
+-------
+
+The "Unevictable mlocked Pages" infrastructure is based on work originally
 posted by Nick Piggin in an RFC patch entitled "mm: mlocked pages off LRU".
-Nick posted his patch as an alternative to a patch posted by Christoph
-Lameter to achieve the same objective--hiding mlocked pages from vmscan.
-In Nick's patch, he used one of the struct page lru list link fields as a count
-of VM_LOCKED vmas that map the page.  This use of the link field for a count
-prevented the management of the pages on an LRU list.  Thus, mlocked pages were
-not migratable as isolate_lru_page() could not find them and the lru list link
-field was not available to the migration subsystem.  Nick resolved this by
-putting mlocked pages back on the lru list before attempting to isolate them,
-thus abandoning the count of VM_LOCKED vmas.  When Nick's patch was integrated
-with the Unevictable LRU work, the count was replaced by walking the reverse
-map to determine whether any VM_LOCKED vmas mapped the page.  More on this
-below.
-
-
-Mlocked Pages:  Basic Management
-
-Mlocked pages--pages mapped into a VM_LOCKED vma--represent one class of
-unevictable pages.  When such a page has been "noticed" by the memory
-management subsystem, the page is marked with the PG_mlocked [PageMlocked()]
-flag.  A PageMlocked() page will be placed on the unevictable LRU list when
-it is added to the LRU.   Pages can be "noticed" by memory management in
-several places:
-
-1) in the mlock()/mlockall() system call handlers.
-2) in the mmap() system call handler when mmap()ing a region with the
-   MAP_LOCKED flag, or mmap()ing a region in a task that has called
-   mlockall() with the MCL_FUTURE flag.  Both of these conditions result
-   in the VM_LOCKED flag being set for the vma.
-3) in the fault path, if mlocked pages are "culled" in the fault path,
-   and when a VM_LOCKED stack segment is expanded.
-4) as mentioned above, in vmscan:shrink_page_list() when attempting to
-   reclaim a page in a VM_LOCKED vma via try_to_unmap().
-
-Mlocked pages become unlocked and rescued from the unevictable list when:
-
-1) mapped in a range unlocked via the munlock()/munlockall() system calls.
-2) munmapped() out of the last VM_LOCKED vma that maps the page, including
-   unmapping at task exit.
-3) when the page is truncated from the last VM_LOCKED vma of an mmap()ed file.
-4) before a page is COWed in a VM_LOCKED vma.
-
-
-Mlocked Pages:  mlock()/mlockall() System Call Handling
+Nick posted his patch as an alternative to a patch posted by Christoph Lameter
+to achieve the same objective: hiding mlocked pages from vmscan.
+
+In Nick's patch, he used one of the struct page LRU list link fields as a count
+of VM_LOCKED VMAs that map the page.  This use of the link field for a count
+prevented the management of the pages on an LRU list, and thus mlocked pages
+were not migratable as isolate_lru_page() could not find them, and the LRU list
+link field was not available to the migration subsystem.
+
+Nick resolved this by putting mlocked pages back on the lru list before
+attempting to isolate them, thus abandoning the count of VM_LOCKED VMAs.  When
+Nick's patch was integrated with the Unevictable LRU work, the count was
+replaced by walking the reverse map to determine whether any VM_LOCKED VMAs
+mapped the page.  More on this below.
+
+
+BASIC MANAGEMENT
+----------------
+
+mlocked pages - pages mapped into a VM_LOCKED VMA - are a class of unevictable
+pages.  When such a page has been "noticed" by the memory management subsystem,
+the page is marked with the PG_mlocked flag.  This can be manipulated using the
+PageMlocked() functions.
+
+A PG_mlocked page will be placed on the unevictable list when it is added to
+the LRU.  Such pages can be "noticed" by memory management in several places:
+
+ (1) in the mlock()/mlockall() system call handlers;
+
+ (2) in the mmap() system call handler when mmapping a region with the
+     MAP_LOCKED flag;
+
+ (3) mmapping a region in a task that has called mlockall() with the MCL_FUTURE
+     flag
+
+ (4) in the fault path, if mlocked pages are "culled" in the fault path,
+     and when a VM_LOCKED stack segment is expanded; or
+
+ (5) as mentioned above, in vmscan:shrink_page_list() when attempting to
+     reclaim a page in a VM_LOCKED VMA via try_to_unmap()
+
+all of which result in the VM_LOCKED flag being set for the VMA if it doesn't
+already have it set.
+
+mlocked pages become unlocked and rescued from the unevictable list when:
+
+ (1) mapped in a range unlocked via the munlock()/munlockall() system calls;
+
+ (2) munmap()'d out of the last VM_LOCKED VMA that maps the page, including
+     unmapping at task exit;
+
+ (3) when the page is truncated from the last VM_LOCKED VMA of an mmapped file;
+     or
+
+ (4) before a page is COW'd in a VM_LOCKED VMA.
+
+
+mlock()/mlockall() SYSTEM CALL HANDLING
+---------------------------------------
 
 Both [do_]mlock() and [do_]mlockall() system call handlers call mlock_fixup()
-for each vma in the range specified by the call.  In the case of mlockall(),
+for each VMA in the range specified by the call.  In the case of mlockall(),
 this is the entire active address space of the task.  Note that mlock_fixup()
-is used for both mlock()ing and munlock()ing a range of memory.  A call to
-mlock() an already VM_LOCKED vma, or to munlock() a vma that is not VM_LOCKED
-is treated as a no-op--mlock_fixup() simply returns.
-
-If the vma passes some filtering described in "Mlocked Pages:  Filtering Vmas"
-below, mlock_fixup() will attempt to merge the vma with its neighbors or split
-off a subset of the vma if the range does not cover the entire vma.  Once the
-vma has been merged or split or neither, mlock_fixup() will call
-__mlock_vma_pages_range() to fault in the pages via get_user_pages() and
-to mark the pages as mlocked via mlock_vma_page().
-
-Note that the vma being mlocked might be mapped with PROT_NONE.  In this case,
-get_user_pages() will be unable to fault in the pages.  That's OK.  If pages
-do end up getting faulted into this VM_LOCKED vma, we'll handle them in the
+is used for both mlocking and munlocking a range of memory.  A call to mlock()
+an already VM_LOCKED VMA, or to munlock() a VMA that is not VM_LOCKED is
+treated as a no-op, and mlock_fixup() simply returns.
+
+If the VMA passes some filtering as described in "Filtering Special Vmas"
+below, mlock_fixup() will attempt to merge the VMA with its neighbors or split
+off a subset of the VMA if the range does not cover the entire VMA.  Once the
+VMA has been merged or split or neither, mlock_fixup() will call
+__mlock_vma_pages_range() to fault in the pages via get_user_pages() and to
+mark the pages as mlocked via mlock_vma_page().
+
+Note that the VMA being mlocked might be mapped with PROT_NONE.  In this case,
+get_user_pages() will be unable to fault in the pages.  That's okay.  If pages
+do end up getting faulted into this VM_LOCKED VMA, we'll handle them in the
 fault path or in vmscan.
 
 Also note that a page returned by get_user_pages() could be truncated or
-migrated out from under us, while we're trying to mlock it.  To detect
-this, __mlock_vma_pages_range() tests the page_mapping after acquiring
-the page lock.  If the page is still associated with its mapping, we'll
-go ahead and call mlock_vma_page().  If the mapping is gone, we just
-unlock the page and move on.  Worse case, this results in page mapped
-in a VM_LOCKED vma remaining on a normal LRU list without being
-PageMlocked().  Again, vmscan will detect and cull such pages.
-
-mlock_vma_page(), called with the page locked [N.B., not "mlocked"], will
-TestSetPageMlocked() for each page returned by get_user_pages().  We use
-TestSetPageMlocked() because the page might already be mlocked by another
-task/vma and we don't want to do extra work.  We especially do not want to
-count an mlocked page more than once in the statistics.  If the page was
-already mlocked, mlock_vma_page() is done.
+migrated out from under us, while we're trying to mlock it.  To detect this,
+__mlock_vma_pages_range() checks page_mapping() after acquiring the page lock.
+If the page is still associated with its mapping, we'll go ahead and call
+mlock_vma_page().  If the mapping is gone, we just unlock the page and move on.
+In the worst case, this will result in a page mapped in a VM_LOCKED VMA
+remaining on a normal LRU list without being PageMlocked().  Again, vmscan will
+detect and cull such pages.
+
+mlock_vma_page() will call TestSetPageMlocked() for each page returned by
+get_user_pages().  We use TestSetPageMlocked() because the page might already
+be mlocked by another task/VMA and we don't want to do extra work.  We
+especially do not want to count an mlocked page more than once in the
+statistics.  If the page was already mlocked, mlock_vma_page() need do nothing
+more.
 
 If the page was NOT already mlocked, mlock_vma_page() attempts to isolate the
 page from the LRU, as it is likely on the appropriate active or inactive list
-at that time.  If the isolate_lru_page() succeeds, mlock_vma_page() will
-putback the page--putback_lru_page()--which will notice that the page is now
-mlocked and divert the page to the zone's unevictable LRU list.  If
+at that time.  If the isolate_lru_page() succeeds, mlock_vma_page() will put
+back the page - by calling putback_lru_page() - which will notice that the page
+is now mlocked and divert the page to the zone's unevictable list.  If
 mlock_vma_page() is unable to isolate the page from the LRU, vmscan will handle
-it later if/when it attempts to reclaim the page.
+it later if and when it attempts to reclaim the page.
 
 
-Mlocked Pages:  Filtering Special Vmas
+FILTERING SPECIAL VMAS
+----------------------
 
-mlock_fixup() filters several classes of "special" vmas:
+mlock_fixup() filters several classes of "special" VMAs:
 
-1) vmas with VM_IO|VM_PFNMAP set are skipped entirely.  The pages behind
+1) VMAs with VM_IO or VM_PFNMAP set are skipped entirely.  The pages behind
    these mappings are inherently pinned, so we don't need to mark them as
-   mlocked.  In any case, most of the pages have no struct page in which to
-   so mark the page.  Because of this, get_user_pages() will fail for these
-   vmas, so there is no sense in attempting to visit them.
-
-2) vmas mapping hugetlbfs page are already effectively pinned into memory.
-   We don't need nor want to mlock() these pages.  However, to preserve the
-   prior behavior of mlock()--before the unevictable/mlock changes--
-   mlock_fixup() will call make_pages_present() in the hugetlbfs vma range
-   to allocate the huge pages and populate the ptes.
-
-3) vmas with VM_DONTEXPAND|VM_RESERVED are generally user space mappings of
-   kernel pages, such as the vdso page, relay channel pages, etc.  These pages
+   mlocked.  In any case, most of the pages have no struct page in which to so
+   mark the page.  Because of this, get_user_pages() will fail for these VMAs,
+   so there is no sense in attempting to visit them.
+
+2) VMAs mapping hugetlbfs page are already effectively pinned into memory.  We
+   neither need nor want to mlock() these pages.  However, to preserve the
+   prior behavior of mlock() - before the unevictable/mlock changes -
+   mlock_fixup() will call make_pages_present() in the hugetlbfs VMA range to
+   allocate the huge pages and populate the ptes.
+
+3) VMAs with VM_DONTEXPAND or VM_RESERVED are generally userspace mappings of
+   kernel pages, such as the VDSO page, relay channel pages, etc.  These pages
    are inherently unevictable and are not managed on the LRU lists.
-   mlock_fixup() treats these vmas the same as hugetlbfs vmas.  It calls
+   mlock_fixup() treats these VMAs the same as hugetlbfs VMAs.  It calls
    make_pages_present() to populate the ptes.
 
-Note that for all of these special vmas, mlock_fixup() does not set the
+Note that for all of these special VMAs, mlock_fixup() does not set the
 VM_LOCKED flag.  Therefore, we won't have to deal with them later during
-munlock() or munmap()--for example, at task exit.  Neither does mlock_fixup()
-account these vmas against the task's "locked_vm".
-
-Mlocked Pages:  Downgrading the Mmap Semaphore.
-
-mlock_fixup() must be called with the mmap semaphore held for write, because
-it may have to merge or split vmas.  However, mlocking a large region of
-memory can take a long time--especially if vmscan must reclaim pages to
-satisfy the regions requirements.  Faulting in a large region with the mmap
-semaphore held for write can hold off other faults on the address space, in
-the case of a multi-threaded task.  It can also hold off scans of the task's
-address space via /proc.  While testing under heavy load, it was observed that
-the ps(1) command could be held off for many minutes while a large segment was
-mlock()ed down.
-
-To address this issue, and to make the system more responsive during mlock()ing
-of large segments, mlock_fixup() downgrades the mmap semaphore to read mode
-during the call to __mlock_vma_pages_range().  This works fine.  However, the
-callers of mlock_fixup() expect the semaphore to be returned in write mode.
-So, mlock_fixup() "upgrades" the semphore to write mode.  Linux does not
-support an atomic upgrade_sem() call, so mlock_fixup() must drop the semaphore
-and reacquire it in write mode.  In a multi-threaded task, it is possible for
-the task memory map to change while the semaphore is dropped.  Therefore,
-mlock_fixup() looks up the vma at the range start address after reacquiring
-the semaphore in write mode and verifies that it still covers the original
-range.  If not, mlock_fixup() returns an error [-EAGAIN].  All callers of
-mlock_fixup() have been changed to deal with this new error condition.
-
-Note:  when munlocking a region, all of the pages should already be resident--
-unless we have racing threads mlocking() and munlocking() regions.  So,
-unlocking should not have to wait for page allocations nor faults  of any kind.
-Therefore mlock_fixup() does not downgrade the semaphore for munlock().
-
-
-Mlocked Pages:  munlock()/munlockall() System Call Handling
-
-The munlock() and munlockall() system calls are handled by the same functions--
-do_mlock[all]()--as the mlock() and mlockall() system calls with the unlock
-vs lock operation indicated by an argument.  So, these system calls are also
-handled by mlock_fixup().  Again, if called for an already munlock()ed vma,
-mlock_fixup() simply returns.  Because of the vma filtering discussed above,
-VM_LOCKED will not be set in any "special" vmas.  So, these vmas will be
+munlock(), munmap() or task exit.  Neither does mlock_fixup() account these
+VMAs against the task's "locked_vm".
+
+
+munlock()/munlockall() SYSTEM CALL HANDLING
+-------------------------------------------
+
+The munlock() and munlockall() system calls are handled by the same functions -
+do_mlock[all]() - as the mlock() and mlockall() system calls with the unlock vs
+lock operation indicated by an argument.  So, these system calls are also
+handled by mlock_fixup().  Again, if called for an already munlocked VMA,
+mlock_fixup() simply returns.  Because of the VMA filtering discussed above,
+VM_LOCKED will not be set in any "special" VMAs.  So, these VMAs will be
 ignored for munlock.
 
-If the vma is VM_LOCKED, mlock_fixup() again attempts to merge or split off
-the specified range.  The range is then munlocked via the function
-__mlock_vma_pages_range()--the same function used to mlock a vma range--
+If the VMA is VM_LOCKED, mlock_fixup() again attempts to merge or split off the
+specified range.  The range is then munlocked via the function
+__mlock_vma_pages_range() - the same function used to mlock a VMA range -
 passing a flag to indicate that munlock() is being performed.
 
-Because the vma access protections could have been changed to PROT_NONE after
+Because the VMA access protections could have been changed to PROT_NONE after
 faulting in and mlocking pages, get_user_pages() was unreliable for visiting
-these pages for munlocking.  Because we don't want to leave pages mlocked(),
+these pages for munlocking.  Because we don't want to leave pages mlocked,
 get_user_pages() was enhanced to accept a flag to ignore the permissions when
-fetching the pages--all of which should be resident as a result of previous
-mlock()ing.
+fetching the pages - all of which should be resident as a result of previous
+mlocking.
 
 For munlock(), __mlock_vma_pages_range() unlocks individual pages by calling
 munlock_vma_page().  munlock_vma_page() unconditionally clears the PG_mlocked
-flag using TestClearPageMlocked().  As with mlock_vma_page(), munlock_vma_page()
-use the Test*PageMlocked() function to handle the case where the page might
-have already been unlocked by another task.  If the page was mlocked,
-munlock_vma_page() updates that zone statistics for the number of mlocked
-pages.  Note, however, that at this point we haven't checked whether the page
-is mapped by other VM_LOCKED vmas.
-
-We can't call try_to_munlock(), the function that walks the reverse map to check
-for other VM_LOCKED vmas, without first isolating the page from the LRU.
+flag using TestClearPageMlocked().  As with mlock_vma_page(),
+munlock_vma_page() use the Test*PageMlocked() function to handle the case where
+the page might have already been unlocked by another task.  If the page was
+mlocked, munlock_vma_page() updates that zone statistics for the number of
+mlocked pages.  Note, however, that at this point we haven't checked whether
+the page is mapped by other VM_LOCKED VMAs.
+
+We can't call try_to_munlock(), the function that walks the reverse map to
+check for other VM_LOCKED VMAs, without first isolating the page from the LRU.
 try_to_munlock() is a variant of try_to_unmap() and thus requires that the page
-not be on an lru list.  [More on these below.]  However, the call to
-isolate_lru_page() could fail, in which case we couldn't try_to_munlock().
-So, we go ahead and clear PG_mlocked up front, as this might be the only chance
-we have.  If we can successfully isolate the page, we go ahead and
+not be on an LRU list [more on these below].  However, the call to
+isolate_lru_page() could fail, in which case we couldn't try_to_munlock().  So,
+we go ahead and clear PG_mlocked up front, as this might be the only chance we
+have.  If we can successfully isolate the page, we go ahead and
 try_to_munlock(), which will restore the PG_mlocked flag and update the zone
-page statistics if it finds another vma holding the page mlocked.  If we fail
+page statistics if it finds another VMA holding the page mlocked.  If we fail
 to isolate the page, we'll have left a potentially mlocked page on the LRU.
-This is fine, because we'll catch it later when/if vmscan tries to reclaim the
-page.  This should be relatively rare.
-
-Mlocked Pages:  Migrating Them...
-
-A page that is being migrated has been isolated from the lru lists and is
-held locked across unmapping of the page, updating the page's mapping
-[address_space] entry and copying the contents and state, until the
-page table entry has been replaced with an entry that refers to the new
-page.  Linux supports migration of mlocked pages and other unevictable
-pages.  This involves simply moving the PageMlocked and PageUnevictable states
-from the old page to the new page.
-
-Note that page migration can race with mlocking or munlocking of the same
-page.  This has been discussed from the mlock/munlock perspective in the
-respective sections above.  Both processes [migration, m[un]locking], hold
-the page locked.  This provides the first level of synchronization.  Page
-migration zeros out the page_mapping of the old page before unlocking it,
-so m[un]lock can skip these pages by testing the page mapping under page
-lock.
-
-When completing page migration, we place the new and old pages back onto the
-lru after dropping the page lock.  The "unneeded" page--old page on success,
-new page on failure--will be freed when the reference count held by the
-migration process is released.  To ensure that we don't strand pages on the
-unevictable list because of a race between munlock and migration, page
-migration uses the putback_lru_page() function to add migrated pages back to
-the lru.
-
-
-Mlocked Pages:  mmap(MAP_LOCKED) System Call Handling
+This is fine, because we'll catch it later if and if vmscan tries to reclaim
+the page.  This should be relatively rare.
+
+
+MIGRATING MLOCKED PAGES
+-----------------------
+
+A page that is being migrated has been isolated from the LRU lists and is held
+locked across unmapping of the page, updating the page's address space entry
+and copying the contents and state, until the page table entry has been
+replaced with an entry that refers to the new page.  Linux supports migration
+of mlocked pages and other unevictable pages.  This involves simply moving the
+PG_mlocked and PG_unevictable states from the old page to the new page.
+
+Note that page migration can race with mlocking or munlocking of the same page.
+This has been discussed from the mlock/munlock perspective in the respective
+sections above.  Both processes (migration and m[un]locking) hold the page
+locked.  This provides the first level of synchronization.  Page migration
+zeros out the page_mapping of the old page before unlocking it, so m[un]lock
+can skip these pages by testing the page mapping under page lock.
+
+To complete page migration, we place the new and old pages back onto the LRU
+after dropping the page lock.  The "unneeded" page - old page on success, new
+page on failure - will be freed when the reference count held by the migration
+process is released.  To ensure that we don't strand pages on the unevictable
+list because of a race between munlock and migration, page migration uses the
+putback_lru_page() function to add migrated pages back to the LRU.
+
+
+mmap(MAP_LOCKED) SYSTEM CALL HANDLING
+-------------------------------------
 
 In addition the the mlock()/mlockall() system calls, an application can request
-that a region of memory be mlocked using the MAP_LOCKED flag with the mmap()
+that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap()
 call.  Furthermore, any mmap() call or brk() call that expands the heap by a
 task that has previously called mlockall() with the MCL_FUTURE flag will result
-in the newly mapped memory being mlocked.  Before the unevictable/mlock changes,
-the kernel simply called make_pages_present() to allocate pages and populate
-the page table.
+in the newly mapped memory being mlocked.  Before the unevictable/mlock
+changes, the kernel simply called make_pages_present() to allocate pages and
+populate the page table.
 
 To mlock a range of memory under the unevictable/mlock infrastructure, the
 mmap() handler and task address space expansion functions call
 mlock_vma_pages_range() specifying the vma and the address range to mlock.
-mlock_vma_pages_range() filters vmas like mlock_fixup(), as described above in
-"Mlocked Pages:  Filtering Vmas".  It will clear the VM_LOCKED flag, which will
-have already been set by the caller, in filtered vmas.  Thus these vma's need
-not be visited for munlock when the region is unmapped.
+mlock_vma_pages_range() filters VMAs like mlock_fixup(), as described above in
+"Filtering Special VMAs".  It will clear the VM_LOCKED flag, which will have
+already been set by the caller, in filtered VMAs.  Thus these VMA's need not be
+visited for munlock when the region is unmapped.
 
-For "normal" vmas, mlock_vma_pages_range() calls __mlock_vma_pages_range() to
+For "normal" VMAs, mlock_vma_pages_range() calls __mlock_vma_pages_range() to
 fault/allocate the pages and mlock them.  Again, like mlock_fixup(),
 mlock_vma_pages_range() downgrades the mmap semaphore to read mode before
-attempting to fault/allocate and mlock the pages; and "upgrades" the semaphore
+attempting to fault/allocate and mlock the pages and "upgrades" the semaphore
 back to write mode before returning.
 
-The callers of mlock_vma_pages_range() will have already added the memory
-range to be mlocked to the task's "locked_vm".  To account for filtered vmas,
+The callers of mlock_vma_pages_range() will have already added the memory range
+to be mlocked to the task's "locked_vm".  To account for filtered VMAs,
 mlock_vma_pages_range() returns the number of pages NOT mlocked.  All of the
-callers then subtract a non-negative return value from the task's locked_vm.
-A negative return value represent an error--for example, from get_user_pages()
-attempting to fault in a vma with PROT_NONE access.  In this case, we leave
-the memory range accounted as locked_vm, as the protections could be changed
-later and pages allocated into that region.
+callers then subtract a non-negative return value from the task's locked_vm.  A
+negative return value represent an error - for example, from get_user_pages()
+attempting to fault in a VMA with PROT_NONE access.  In this case, we leave the
+memory range accounted as locked_vm, as the protections could be changed later
+and pages allocated into that region.
 
 
-Mlocked Pages:  munmap()/exit()/exec() System Call Handling
+munmap()/exit()/exec() SYSTEM CALL HANDLING
+-------------------------------------------
 
 When unmapping an mlocked region of memory, whether by an explicit call to
 munmap() or via an internal unmap from exit() or exec() processing, we must
-munlock the pages if we're removing the last VM_LOCKED vma that maps the pages.
+munlock the pages if we're removing the last VM_LOCKED VMA that maps the pages.
 Before the unevictable/mlock changes, mlocking did not mark the pages in any
 way, so unmapping them required no processing.
 
 To munlock a range of memory under the unevictable/mlock infrastructure, the
-munmap() hander and task address space tear down function call
+munmap() handler and task address space call tear down function
 munlock_vma_pages_all().  The name reflects the observation that one always
-specifies the entire vma range when munlock()ing during unmap of a region.
-Because of the vma filtering when mlocking() regions, only "normal" vmas that
+specifies the entire VMA range when munlock()ing during unmap of a region.
+Because of the VMA filtering when mlocking() regions, only "normal" VMAs that
 actually contain mlocked pages will be passed to munlock_vma_pages_all().
 
-munlock_vma_pages_all() clears the VM_LOCKED vma flag and, like mlock_fixup()
+munlock_vma_pages_all() clears the VM_LOCKED VMA flag and, like mlock_fixup()
 for the munlock case, calls __munlock_vma_pages_range() to walk the page table
-for the vma's memory range and munlock_vma_page() each resident page mapped by
-the vma.  This effectively munlocks the page, only if this is the last
-VM_LOCKED vma that maps the page.
-
+for the VMA's memory range and munlock_vma_page() each resident page mapped by
+the VMA.  This effectively munlocks the page, only if this is the last
+VM_LOCKED VMA that maps the page.
 
-Mlocked Page:  try_to_unmap()
 
-[Note:  the code changes represented by this section are really quite small
-compared to the text to describe what happening and why, and to discuss the
-implications.]
+try_to_unmap()
+--------------
 
-Pages can, of course, be mapped into multiple vmas.  Some of these vmas may
+Pages can, of course, be mapped into multiple VMAs.  Some of these VMAs may
 have VM_LOCKED flag set.  It is possible for a page mapped into one or more
-VM_LOCKED vmas not to have the PG_mlocked flag set and therefore reside on one
-of the active or inactive LRU lists.  This could happen if, for example, a
-task in the process of munlock()ing the page could not isolate the page from
-the LRU.  As a result, vmscan/shrink_page_list() might encounter such a page
-as described in "Unevictable Pages and Vmscan [shrink_*_list()]".  To
-handle this situation, try_to_unmap() has been enhanced to check for VM_LOCKED
-vmas while it is walking a page's reverse map.
+VM_LOCKED VMAs not to have the PG_mlocked flag set and therefore reside on one
+of the active or inactive LRU lists.  This could happen if, for example, a task
+in the process of munlocking the page could not isolate the page from the LRU.
+As a result, vmscan/shrink_page_list() might encounter such a page as described
+in section "vmscan's handling of unevictable pages".  To handle this situation,
+try_to_unmap() checks for VM_LOCKED VMAs while it is walking a page's reverse
+map.
 
 try_to_unmap() is always called, by either vmscan for reclaim or for page
-migration, with the argument page locked and isolated from the LRU.  BUG_ON()
-assertions enforce this requirement.  Separate functions handle anonymous and
-mapped file pages, as these types of pages have different reverse map
-mechanisms.
-
-	try_to_unmap_anon()
-
-To unmap anonymous pages, each vma in the list anchored in the anon_vma must be
-visited--at least until a VM_LOCKED vma is encountered.  If the page is being
-unmapped for migration, VM_LOCKED vmas do not stop the process because mlocked
-pages are migratable.  However, for reclaim, if the page is mapped into a
-VM_LOCKED vma, the scan stops.  try_to_unmap() attempts to acquire the mmap
-semphore of the mm_struct to which the vma belongs in read mode.  If this is
-successful, try_to_unmap() will mlock the page via mlock_vma_page()--we
-wouldn't have gotten to try_to_unmap() if the page were already mlocked--and
-will return SWAP_MLOCK, indicating that the page is unevictable.  If the
-mmap semaphore cannot be acquired, we are not sure whether the page is really
-unevictable or not.  In this case, try_to_unmap() will return SWAP_AGAIN.
-
-	try_to_unmap_file() -- linear mappings
-
-Unmapping of a mapped file page works the same, except that the scan visits
-all vmas that maps the page's index/page offset in the page's mapping's
-reverse map priority search tree.  It must also visit each vma in the page's
-mapping's non-linear list, if the list is non-empty.  As for anonymous pages,
-on encountering a VM_LOCKED vma for a mapped file page, try_to_unmap() will
-attempt to acquire the associated mm_struct's mmap semaphore to mlock the page,
-returning SWAP_MLOCK if this is successful, and SWAP_AGAIN, if not.
-
-	try_to_unmap_file() -- non-linear mappings
-
-If a page's mapping contains a non-empty non-linear mapping vma list, then
-try_to_un{map|lock}() must also visit each vma in that list to determine
-whether the page is mapped in a VM_LOCKED vma.  Again, the scan must visit
-all vmas in the non-linear list to ensure that the pages is not/should not be
-mlocked.  If a VM_LOCKED vma is found in the list, the scan could terminate.
-However, there is no easy way to determine whether the page is actually mapped
-in a given vma--either for unmapping or testing whether the VM_LOCKED vma
-actually pins the page.
-
-So, try_to_unmap_file() handles non-linear mappings by scanning a certain
-number of pages--a "cluster"--in each non-linear vma associated with the page's
-mapping, for each file mapped page that vmscan tries to unmap.  If this happens
-to unmap the page we're trying to unmap, try_to_unmap() will notice this on
-return--(page_mapcount(page) == 0)--and return SWAP_SUCCESS.  Otherwise, it
-will return SWAP_AGAIN, causing vmscan to recirculate this page.  We take
-advantage of the cluster scan in try_to_unmap_cluster() as follows:
-
-For each non-linear vma, try_to_unmap_cluster() attempts to acquire the mmap
-semaphore of the associated mm_struct for read without blocking.  If this
-attempt is successful and the vma is VM_LOCKED, try_to_unmap_cluster() will
-retain the mmap semaphore for the scan; otherwise it drops it here.  Then,
-for each page in the cluster, if we're holding the mmap semaphore for a locked
-vma, try_to_unmap_cluster() calls mlock_vma_page() to mlock the page.  This
-call is a no-op if the page is already locked, but will mlock any pages in
-the non-linear mapping that happen to be unlocked.  If one of the pages so
-mlocked is the page passed in to try_to_unmap(), try_to_unmap_cluster() will
-return SWAP_MLOCK, rather than the default SWAP_AGAIN.  This will allow vmscan
-to cull the page, rather than recirculating it on the inactive list.  Again,
-if try_to_unmap_cluster() cannot acquire the vma's mmap sem, it returns
-SWAP_AGAIN, indicating that the page is mapped by a VM_LOCKED vma, but
-couldn't be mlocked.
-
-
-Mlocked pages:  try_to_munlock() Reverse Map Scan
-
-TODO/FIXME:  a better name might be page_mlocked()--analogous to the
-page_referenced() reverse map walker.
-
-When munlock_vma_page()--see "Mlocked Pages:  munlock()/munlockall()
-System Call Handling" above--tries to munlock a page, it needs to
-determine whether or not the page is mapped by any VM_LOCKED vma, without
-actually attempting to unmap all ptes from the page.  For this purpose, the
-unevictable/mlock infrastructure introduced a variant of try_to_unmap() called
-try_to_munlock().
+migration, with the argument page locked and isolated from the LRU.  Separate
+functions handle anonymous and mapped file pages, as these types of pages have
+different reverse map mechanisms.
+
+ (*) try_to_unmap_anon()
+
+     To unmap anonymous pages, each VMA in the list anchored in the anon_vma
+     must be visited - at least until a VM_LOCKED VMA is encountered.  If the
+     page is being unmapped for migration, VM_LOCKED VMAs do not stop the
+     process because mlocked pages are migratable.  However, for reclaim, if
+     the page is mapped into a VM_LOCKED VMA, the scan stops.
+
+     try_to_unmap_anon() attempts to acquire in read mode the mmap semphore of
+     the mm_struct to which the VMA belongs.  If this is successful, it will
+     mlock the page via mlock_vma_page() - we wouldn't have gotten to
+     try_to_unmap_anon() if the page were already mlocked - and will return
+     SWAP_MLOCK, indicating that the page is unevictable.
+
+     If the mmap semaphore cannot be acquired, we are not sure whether the page
+     is really unevictable or not.  In this case, try_to_unmap_anon() will
+     return SWAP_AGAIN.
+
+ (*) try_to_unmap_file() - linear mappings
+
+     Unmapping of a mapped file page works the same as for anonymous mappings,
+     except that the scan visits all VMAs that map the page's index/page offset
+     in the page's mapping's reverse map priority search tree.  It also visits
+     each VMA in the page's mapping's non-linear list, if the list is
+     non-empty.
+
+     As for anonymous pages, on encountering a VM_LOCKED VMA for a mapped file
+     page, try_to_unmap_file() will attempt to acquire the associated
+     mm_struct's mmap semaphore to mlock the page, returning SWAP_MLOCK if this
+     is successful, and SWAP_AGAIN, if not.
+
+ (*) try_to_unmap_file() - non-linear mappings
+
+     If a page's mapping contains a non-empty non-linear mapping VMA list, then
+     try_to_un{map|lock}() must also visit each VMA in that list to determine
+     whether the page is mapped in a VM_LOCKED VMA.  Again, the scan must visit
+     all VMAs in the non-linear list to ensure that the pages is not/should not
+     be mlocked.
+
+     If a VM_LOCKED VMA is found in the list, the scan could terminate.
+     However, there is no easy way to determine whether the page is actually
+     mapped in a given VMA - either for unmapping or testing whether the
+     VM_LOCKED VMA actually pins the page.
+
+     try_to_unmap_file() handles non-linear mappings by scanning a certain
+     number of pages - a "cluster" - in each non-linear VMA associated with the
+     page's mapping, for each file mapped page that vmscan tries to unmap.  If
+     this happens to unmap the page we're trying to unmap, try_to_unmap() will
+     notice this on return (page_mapcount(page) will be 0) and return
+     SWAP_SUCCESS.  Otherwise, it will return SWAP_AGAIN, causing vmscan to
+     recirculate this page.  We take advantage of the cluster scan in
+     try_to_unmap_cluster() as follows:
+
+	For each non-linear VMA, try_to_unmap_cluster() attempts to acquire the
+	mmap semaphore of the associated mm_struct for read without blocking.
+
+	If this attempt is successful and the VMA is VM_LOCKED,
+	try_to_unmap_cluster() will retain the mmap semaphore for the scan;
+	otherwise it drops it here.
+
+	Then, for each page in the cluster, if we're holding the mmap semaphore
+	for a locked VMA, try_to_unmap_cluster() calls mlock_vma_page() to
+	mlock the page.  This call is a no-op if the page is already locked,
+	but will mlock any pages in the non-linear mapping that happen to be
+	unlocked.
+
+	If one of the pages so mlocked is the page passed in to try_to_unmap(),
+	try_to_unmap_cluster() will return SWAP_MLOCK, rather than the default
+	SWAP_AGAIN.  This will allow vmscan to cull the page, rather than
+	recirculating it on the inactive list.
+
+	Again, if try_to_unmap_cluster() cannot acquire the VMA's mmap sem, it
+	returns SWAP_AGAIN, indicating that the page is mapped by a VM_LOCKED
+	VMA, but couldn't be mlocked.
+
+
+try_to_munlock() REVERSE MAP SCAN
+---------------------------------
+
+ [!] TODO/FIXME: a better name might be page_mlocked() - analogous to the
+     page_referenced() reverse map walker.
+
+When munlock_vma_page() [see section "munlock()/munlockall() System Call
+Handling" above] tries to munlock a page, it needs to determine whether or not
+the page is mapped by any VM_LOCKED VMA without actually attempting to unmap
+all PTEs from the page.  For this purpose, the unevictable/mlock infrastructure
+introduced a variant of try_to_unmap() called try_to_munlock().
 
 try_to_munlock() calls the same functions as try_to_unmap() for anonymous and
 mapped file pages with an additional argument specifing unlock versus unmap
 processing.  Again, these functions walk the respective reverse maps looking
-for VM_LOCKED vmas.  When such a vma is found for anonymous pages and file
+for VM_LOCKED VMAs.  When such a VMA is found for anonymous pages and file
 pages mapped in linear VMAs, as in the try_to_unmap() case, the functions
 attempt to acquire the associated mmap semphore, mlock the page via
 mlock_vma_page() and return SWAP_MLOCK.  This effectively undoes the
 pre-clearing of the page's PG_mlocked done by munlock_vma_page.
 
-If try_to_unmap() is unable to acquire a VM_LOCKED vma's associated mmap
-semaphore, it will return SWAP_AGAIN.  This will allow shrink_page_list()
-to recycle the page on the inactive list and hope that it has better luck
-with the page next time.
-
-For file pages mapped into non-linear vmas, the try_to_munlock() logic works
-slightly differently.  On encountering a VM_LOCKED non-linear vma that might
-map the page, try_to_munlock() returns SWAP_AGAIN without actually mlocking
-the page.  munlock_vma_page() will just leave the page unlocked and let
-vmscan deal with it--the usual fallback position.
-
-Note that try_to_munlock()'s reverse map walk must visit every vma in a pages'
-reverse map to determine that a page is NOT mapped into any VM_LOCKED vma.
-However, the scan can terminate when it encounters a VM_LOCKED vma and can
-successfully acquire the vma's mmap semphore for read and mlock the page.
-Although try_to_munlock() can be called many [very many!] times when
-munlock()ing a large region or tearing down a large address space that has been
-mlocked via mlockall(), overall this is a fairly rare event.
-
-Mlocked Page:  Page Reclaim in shrink_*_list()
-
-shrink_active_list() culls any obviously unevictable pages--i.e.,
-!page_evictable(page, NULL)--diverting these to the unevictable lru
-list.  However, shrink_active_list() only sees unevictable pages that
-made it onto the active/inactive lru lists.  Note that these pages do not
-have PageUnevictable set--otherwise, they would be on the unevictable list and
-shrink_active_list would never see them.
+If try_to_unmap() is unable to acquire a VM_LOCKED VMA's associated mmap
+semaphore, it will return SWAP_AGAIN.  This will allow shrink_page_list() to
+recycle the page on the inactive list and hope that it has better luck with the
+page next time.
+
+For file pages mapped into non-linear VMAs, the try_to_munlock() logic works
+slightly differently.  On encountering a VM_LOCKED non-linear VMA that might
+map the page, try_to_munlock() returns SWAP_AGAIN without actually mlocking the
+page.  munlock_vma_page() will just leave the page unlocked and let vmscan deal
+with it - the usual fallback position.
+
+Note that try_to_munlock()'s reverse map walk must visit every VMA in a page's
+reverse map to determine that a page is NOT mapped into any VM_LOCKED VMA.
+However, the scan can terminate when it encounters a VM_LOCKED VMA and can
+successfully acquire the VMA's mmap semphore for read and mlock the page.
+Although try_to_munlock() might be called a great many times when munlocking a
+large region or tearing down a large address space that has been mlocked via
+mlockall(), overall this is a fairly rare event.
+
+
+PAGE RECLAIM IN shrink_*_list()
+-------------------------------
+
+shrink_active_list() culls any obviously unevictable pages - i.e.
+!page_evictable(page, NULL) - diverting these to the unevictable list.
+However, shrink_active_list() only sees unevictable pages that made it onto the
+active/inactive lru lists.  Note that these pages do not have PageUnevictable
+set - otherwise they would be on the unevictable list and shrink_active_list
+would never see them.
 
 Some examples of these unevictable pages on the LRU lists are:
 
-1) ramfs pages that have been placed on the lru lists when first allocated.
+ (1) ramfs pages that have been placed on the LRU lists when first allocated.
+
+ (2) SHM_LOCK'd shared memory pages.  shmctl(SHM_LOCK) does not attempt to
+     allocate or fault in the pages in the shared memory region.  This happens
+     when an application accesses the page the first time after SHM_LOCK'ing
+     the segment.
 
-2) SHM_LOCKed shared memory pages.  shmctl(SHM_LOCK) does not attempt to
-   allocate or fault in the pages in the shared memory region.  This happens
-   when an application accesses the page the first time after SHM_LOCKing
-   the segment.
+ (3) mlocked pages that could not be isolated from the LRU and moved to the
+     unevictable list in mlock_vma_page().
 
-3) Mlocked pages that could not be isolated from the lru and moved to the
-   unevictable list in mlock_vma_page().
+ (4) Pages mapped into multiple VM_LOCKED VMAs, but try_to_munlock() couldn't
+     acquire the VMA's mmap semaphore to test the flags and set PageMlocked.
+     munlock_vma_page() was forced to let the page back on to the normal LRU
+     list for vmscan to handle.
 
-3) Pages mapped into multiple VM_LOCKED vmas, but try_to_munlock() couldn't
-   acquire the vma's mmap semaphore to test the flags and set PageMlocked.
-   munlock_vma_page() was forced to let the page back on to the normal
-   LRU list for vmscan to handle.
+shrink_inactive_list() also diverts any unevictable pages that it finds on the
+inactive lists to the appropriate zone's unevictable list.
 
-shrink_inactive_list() also culls any unevictable pages that it finds on
-the inactive lists, again diverting them to the appropriate zone's unevictable
-lru list.  shrink_inactive_list() should only see SHM_LOCKed pages that became
-SHM_LOCKed after shrink_active_list() had moved them to the inactive list, or
-pages mapped into VM_LOCKED vmas that munlock_vma_page() couldn't isolate from
-the lru to recheck via try_to_munlock().  shrink_inactive_list() won't notice
-the latter, but will pass on to shrink_page_list().
+shrink_inactive_list() should only see SHM_LOCK'd pages that became SHM_LOCK'd
+after shrink_active_list() had moved them to the inactive list, or pages mapped
+into VM_LOCKED VMAs that munlock_vma_page() couldn't isolate from the LRU to
+recheck via try_to_munlock().  shrink_inactive_list() won't notice the latter,
+but will pass on to shrink_page_list().
 
 shrink_page_list() again culls obviously unevictable pages that it could
 encounter for similar reason to shrink_inactive_list().  Pages mapped into
-VM_LOCKED vmas but without PG_mlocked set will make it all the way to
+VM_LOCKED VMAs but without PG_mlocked set will make it all the way to
 try_to_unmap().  shrink_page_list() will divert them to the unevictable list
 when try_to_unmap() returns SWAP_MLOCK, as discussed above.

MAINTAINERS

@@ -461,7 +461,7 @@ F:	arch/x86/include/asm/amd_iommu*.h
 
 AMD MICROCODE UPDATE SUPPORT
 P:	Andreas Herrmann
-M:	andeas.herrmann3@amd.com
+M:	andreas.herrmann3@amd.com
 L:	amd64-microcode@amd64.org
 S:	Supported
 F:	arch/x86/kernel/microcode_amd.c
@@ -543,6 +543,14 @@ S:	Maintained
 F:	arch/arm/lib/floppydma.S
 F:	arch/arm/include/asm/floppy.h
 
+ARM PORT
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/
+
 ARM PRIMECELL MMCI PL180/1 DRIVER
 S:	Orphan
 F:	drivers/mmc/host/mmci.*
@@ -592,6 +600,13 @@ M:	kernel@wantstofly.org
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/CLKDEV SUPPORT
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+F:	arch/arm/common/clkdev.c
+F:	arch/arm/include/asm/clkdev.h
+
 ARM/COMPULAB CM-X270/EM-X270 and CM-X300 MACHINE SUPPORT
 P:	Mike Rapoport
 M:	mike@compulab.co.il
@@ -610,6 +625,15 @@ L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 T:	git git://gitorious.org/linux-gemini/mainline.git
 S:	Maintained
 
+ARM/EBSA110 MACHINE SUPPORT
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/mach-ebsa110/
+F:	drivers/net/arm/am79c961a.*
+
 ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
 P:	Daniel Ribeiro
 M:	drwyrm@gmail.com
@@ -627,6 +651,15 @@ M:	paulius.zaleckas@teltonika.lt
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/FOOTBRIDGE ARCHITECTURE
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/include/asm/hardware/dec21285.h
+F:	arch/arm/mach-footbridge/
+
 ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
 P:	Sascha Hauer
 M:	kernel@pengutronix.de
@@ -767,19 +800,27 @@ M:	kernel@wantstofly.org
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/RISCPC ARCHITECTURE
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/common/time-acorn.c
+F:	arch/arm/include/asm/hardware/entry-macro-iomd.S
+F:	arch/arm/include/asm/hardware/ioc.h
+F:	arch/arm/include/asm/hardware/iomd.h
+F:	arch/arm/include/asm/hardware/memc.h
+F:	arch/arm/mach-rpc/
+F:	drivers/net/arm/ether*
+F:	drivers/scsi/arm/
+
 ARM/SHARK MACHINE SUPPORT
 P:	Alexander Schulz
 M:	alex@shark-linux.de
 W:	http://www.shark-linux.de/shark.html
 S:	Maintained
 
-ARM/STRONGARM110 PORT
-P:	Russell King
-M:	rmk@arm.linux.org.uk
-L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
-W:	http://www.arm.linux.org.uk/
-S:	Maintained
-
 ARM/S3C2410 ARM ARCHITECTURE
 P:	Ben Dooks
 M:	ben-linux@fluff.org
@@ -813,6 +854,14 @@ L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:	http://www.mcuos.com
 S:	Maintained
 
+ARM/VFP SUPPORT
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/vfp/
+
 ARPD SUPPORT
 P:	Jonathan Layes
 L:	netdev@vger.kernel.org
@@ -1238,6 +1287,14 @@ S:	Maintained
 F:	Documentation/video4linux/bttv/
 F:	drivers/media/video/bt8xx/bttv*
 
+CACHEFILES: FS-CACHE BACKEND FOR CACHING ON MOUNTED FILESYSTEMS
+P:	David Howells
+M:	dhowells@redhat.com
+L:	linux-cachefs@redhat.com
+S:	Supported
+F:	Documentation/filesystems/caching/cachefiles.txt
+F:	fs/cachefiles/
+
 CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER
 P:	Jonathan Corbet
 M:	corbet@lwn.net
@@ -1280,12 +1337,9 @@ L:	cbe-oss-dev@ozlabs.org
 W:	http://www.ibm.com/developerworks/power/cell/
 S:	Supported
 F:	arch/powerpc/include/asm/cell*.h
-F:	arch/powerpc/include/asm/lv1call.h
-F:	arch/powerpc/include/asm/ps3*.h
 F:	arch/powerpc/include/asm/spu*.h
 F:	arch/powerpc/oprofile/*cell*
 F:	arch/powerpc/platforms/cell/
-F:	arch/powerpc/platforms/ps3/
 
 CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
 P:	David Vrabel
@@ -1372,6 +1426,11 @@ S:	Maintained
 F:	Documentation/input/cs461x.txt
 F:	sound/pci/cs46xx/
 
+CLK API
+P:	Russell King
+M:	linux@arm.linux.org.uk
+F:	include/linux/clk.h
+
 CODA FILE SYSTEM
 P:	Jan Harkes
 M:	jaharkes@cs.cmu.edu
@@ -1576,7 +1635,8 @@ F:	drivers/infiniband/hw/cxgb3/
 
 CYBERPRO FB DRIVER
 P:	Russell King
-M:	rmk@arm.linux.org.uk
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
 F:	drivers/video/cyber2000fb.*
@@ -1894,7 +1954,7 @@ F:	fs/ecryptfs/
 EDAC-CORE
 P:	Doug Thompson
 M:	dougthompson@xmission.com
-L:	bluesmoke-devel@lists.sourceforge.net
+L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Supported
 F:	Documentation/edac.txt
@@ -1906,7 +1966,7 @@ P:	Mark Gross
 P:	Doug Thompson
 M:	mark.gross@intel.com
 M:	dougthompson@xmission.com
-L:	bluesmoke-devel@lists.sourceforge.net
+L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/e752x_edac.c
@@ -1914,7 +1974,7 @@ F:	drivers/edac/e752x_edac.c
 EDAC-E7XXX
 P:	Doug Thompson
 M:	dougthompson@xmission.com
-L:	bluesmoke-devel@lists.sourceforge.net
+L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/e7xxx_edac.c
@@ -1922,7 +1982,7 @@ F:	drivers/edac/e7xxx_edac.c
 EDAC-I82443BXGX
 P:	Tim Small
 M:	tim@buttersideup.com
-L:	bluesmoke-devel@lists.sourceforge.net
+L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i82443bxgx_edac.c
@@ -1930,7 +1990,7 @@ F:	drivers/edac/i82443bxgx_edac.c
 EDAC-I3000
 P:	Jason Uhlenkott
 M:	juhlenko@akamai.com
-L:	bluesmoke-devel@lists.sourceforge.net
+L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i3000_edac.c
@@ -1938,7 +1998,7 @@ F:	drivers/edac/i3000_edac.c
 EDAC-I5000
 P:	Doug Thompson
 M:	dougthompson@xmission.com
-L:	bluesmoke-devel@lists.sourceforge.net
+L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i5000_edac.c
@@ -1946,7 +2006,7 @@ F:	drivers/edac/i5000_edac.c
 EDAC-I5400
 P:	Mauro Carvalho Chehab
 M:	mchehab@redhat.com
-L:	bluesmoke-devel@lists.sourceforge.net
+L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i5400_edac.c
@@ -1956,7 +2016,7 @@ P:	Ranganathan Desikan
 P:	Arvind R.
 M:	rdesikan@jetzbroadband.com
 M:	arvind@acarlab.com
-L:	bluesmoke-devel@lists.sourceforge.net
+L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i82975x_edac.c
@@ -1964,7 +2024,7 @@ F:	drivers/edac/i82975x_edac.c
 EDAC-PASEMI
 P:	Egor Martovetsky
 M:	egor@pasemi.com
-L:	bluesmoke-devel@lists.sourceforge.net
+L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/pasemi_edac.c
@@ -1972,7 +2032,7 @@ F:	drivers/edac/pasemi_edac.c
 EDAC-R82600
 P:	Tim Small
 M:	tim@buttersideup.com
-L:	bluesmoke-devel@lists.sourceforge.net
+L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/r82600_edac.c
@@ -2002,6 +2062,8 @@ F:	drivers/infiniband/hw/ehca/
 EMBEDDED LINUX
 P:	Paul Gortmaker
 M:	paul.gortmaker@windriver.com
+P:	Matt Mackall
+M:	mpm@selenic.com
 P:	David Woodhouse
 M:	dwmw2@infradead.org
 L:	linux-embedded@vger.kernel.org
@@ -2270,6 +2332,15 @@ F:	Documentation/power/freezing-of-tasks.txt
 F:	include/linux/freezer.h
 F:	kernel/freezer.c
 
+FS-CACHE: LOCAL CACHING FOR NETWORK FILESYSTEMS
+P:	David Howells
+M:	dhowells@redhat.com
+L:	linux-cachefs@redhat.com
+S:	Supported
+F:	Documentation/filesystems/caching/
+F:	fs/fscache/
+F:	include/linux/fscache*.h
+
 FTRACE
 P:	Steven Rostedt
 M:	rostedt@goodmis.org
@@ -2490,7 +2561,6 @@ F:	kernel/power/
 F:	include/linux/suspend.h
 F:	include/linux/freezer.h
 F:	include/linux/pm.h
-F:	include/asm-*/suspend*.h
 F:	arch/*/include/asm/suspend*.h
 
 HID CORE LAYER
@@ -2592,8 +2662,8 @@ S:	Maintained
 F:	fs/hpfs/
 
 HSO 3G MODEM DRIVER
-P:	Denis Joseph Barrow
-M:	d.barow@option.com
+P:	Jan Dumon
+M:	j.dumon@option.com
 W:	http://www.pharscape.org
 S:	Maintained
 F:	drivers/net/usb/hso.c
@@ -2688,7 +2758,7 @@ IDE SUBSYSTEM
 P:	Bartlomiej Zolnierkiewicz
 M:	bzolnier@gmail.com
 L:	linux-ide@vger.kernel.org
-T:	quilt kernel.org/pub/linux/kernel/people/bart/pata-2.6/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6.git
 S:	Maintained
 F:	Documentation/ide/
 F:	drivers/ide/
@@ -3268,7 +3338,7 @@ P:	Eduard - Gabriel Munteanu
 M:	eduard.munteanu@linux360.ro
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
-F:	Documentation/vm/kmemtrace.txt
+F:	Documentation/trace/kmemtrace.txt
 F:	include/trace/kmemtrace.h
 F:	kernel/trace/kmemtrace.c
 
@@ -3364,11 +3434,10 @@ L:	linuxppc-dev@ozlabs.org
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED MPC5XXX
-P:	Sylvain Munaut
-M:	tnt@246tNt.com
 P:	Grant Likely
 M:	grant.likely@secretlab.ca
 L:	linuxppc-dev@ozlabs.org
+T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED PPC4XX
@@ -3378,7 +3447,7 @@ P:	Matt Porter
 M:	mporter@kernel.crashing.org
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@ozlabs.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
@@ -3386,6 +3455,7 @@ P:	Grant Likely
 M:	grant.likely@secretlab.ca
 W:	http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex
 L:	linuxppc-dev@ozlabs.org
+T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED PPC8XX
@@ -3680,6 +3750,7 @@ L:	microblaze-uclinux@itee.uq.edu.au
 W:	http://www.monstr.eu/fdt/
 T:	git git://git.monstr.eu/linux-2.6-microblaze.git
 S:	Supported
+F:	arch/microblaze/
 
 MICROTEK X6 SCANNER
 P:	Oliver Neukum
@@ -3916,19 +3987,12 @@ F:	Documentation/blockdev/nbd.txt
 F:	drivers/block/nbd.c
 F:	include/linux/nbd.h
 
-NETWORK DEVICE DRIVERS
-P:	Jeff Garzik
-M:	jgarzik@pobox.com
-L:	netdev@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
-S:	Maintained
-F:	drivers/net/
-
 NETWORKING [GENERAL]
-P:	Networking Team
-M:	netdev@vger.kernel.org
+P:	David S. Miller
+M:	davem@davemloft.net
 L:	netdev@vger.kernel.org
-W:	http://linux-net.osdl.org/
+W:	http://www.linuxfoundation.org/en/Net
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
 S:	Maintained
 F:	net/
 F:	include/net/
@@ -3969,6 +4033,13 @@ F:	net/wireless/
 F:	include/net/ieee80211*
 F:	include/net/wireless.h
 
+NETWORKING DRIVERS
+L:	netdev@vger.kernel.org
+W:	http://www.linuxfoundation.org/en/Net
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
+S:	Odd Fixes
+F:	drivers/net/
+
 NETXEN (1/10) GbE SUPPORT
 P:	Dhananjay Phadke
 M:	dhananjay@netxen.com
@@ -4118,7 +4189,7 @@ P:	Joel Becker
 M:	joel.becker@oracle.com
 L:	ocfs2-devel@oss.oracle.com (moderated for non-subscribers)
 W:	http://oss.oracle.com/projects/ocfs2/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git
 S:	Supported
 F:	Documentation/filesystems/ocfs2.txt
 F:	Documentation/filesystems/dlmfs.txt
@@ -4440,7 +4511,9 @@ F:	arch/powerpc/include/asm/ps3*.h
 F:	arch/powerpc/platforms/ps3/
 F:	drivers/*/ps3*
 F:	drivers/ps3/
+F:	drivers/rtc/rtc-ps3.c
 F:	drivers/usb/host/*ps3.c
+F:	sound/ppc/snd_ps3*
 
 PS3VRAM DRIVER
 P:	Jim Paris
@@ -4448,6 +4521,19 @@ M:	jim@jtan.com
 L:	cbe-oss-dev@ozlabs.org
 S:	Maintained
 
+PTRACE SUPPORT
+P:	Roland McGrath
+M:	roland@redhat.com
+P:	Oleg Nesterov
+M:	oleg@redhat.com
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	include/asm-generic/syscall.h
+F:	include/linux/ptrace.h
+F:	include/linux/regset.h
+F:	include/linux/tracehook.h
+F:	kernel/ptrace.c
+
 PVRUSB2 VIDEO4LINUX DRIVER
 P:	Mike Isely
 M:	isely@pobox.com
@@ -4593,13 +4679,13 @@ F:	kernel/rcutorture.c
 
 RDC R-321X SoC
 P:	Florian Fainelli
-M:	florian.fainelli@telecomint.eu
+M:	florian@openwrt.org
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
 RDC R6040 FAST ETHERNET DRIVER
 P:	Florian Fainelli
-M:	florian.fainelli@telecomint.eu
+M:	florian@openwrt.org
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/r6040.c
@@ -4978,8 +5064,8 @@ S:	Maintained for 2.6.
 F:	Documentation/sgi-visws.txt
 
 SGI XP/XPC/XPNET DRIVER
-P:	Dean Nelson
-M:	dcn@sgi.com
+P:	Robin Holt
+M:	holt@sgi.com
 S:	Maintained
 F:	drivers/misc/sgi-xp/
 
@@ -5186,7 +5272,12 @@ M:	perex@perex.cz
 P:	Takashi Iwai
 M:	tiwai@suse.de
 L:	alsa-devel@alsa-project.org (subscribers-only)
+W:	http://www.alsa-project.org/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
+T:	git git://git.alsa-project.org/alsa-kernel.git
 S:	Maintained
+F:	Documentation/sound/
+F:	include/sound/
 F:	sound/
 
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
@@ -5313,7 +5404,9 @@ L:	linux-sh@vger.kernel.org
 W:	http://www.linux-sh.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git
 S:	Supported
+F:	Documentation/sh/
 F:	arch/sh/
+F:	drivers/sh/
 
 SUSPEND TO RAM
 P:	Len Brown
@@ -5331,7 +5424,6 @@ F:	kernel/power/
 F:	include/linux/suspend.h
 F:	include/linux/freezer.h
 F:	include/linux/pm.h
-F:	include/asm-*/suspend.h
 
 SVGA HANDLING
 P:	Martin Mares
@@ -5565,7 +5657,7 @@ L:	uclinux-dev@uclinux.org  (subscribers-only)
 S:	Maintained
 F:	arch/m68knommu/
 
-UCLINUX FOR RENESAS H8/300
+UCLINUX FOR RENESAS H8/300 (H8300)
 P:	Yoshinori Sato
 M:	ysato@users.sourceforge.jp
 W:	http://uclinux-h8.sourceforge.jp/

Makefile

@@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 30
-EXTRAVERSION = -rc1
-NAME = Temporary Tasmanian Devil
+EXTRAVERSION = -rc4
+NAME = Vindictive Armadillo
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -169,7 +169,7 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
 				  -e s/arm.*/arm/ -e s/sa110/arm/ \
 				  -e s/s390x/s390/ -e s/parisc64/parisc/ \
 				  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
-				  -e s/sh.*/sh/ )
+				  -e s/sh[234].*/sh/ )
 
 # Cross compiling and selecting different set of gcc/bin-utils
 # ---------------------------------------------------------------------------
@@ -210,6 +210,11 @@ ifeq ($(ARCH),sparc64)
        SRCARCH := sparc
 endif
 
+# Additional ARCH settings for sh
+ifeq ($(ARCH),sh64)
+       SRCARCH := sh
+endif
+
 # Where to locate arch specific headers
 hdr-arch  := $(SRCARCH)
 
@@ -1195,7 +1200,7 @@ CLEAN_FILES +=	vmlinux System.map \
                 .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
 
 # Directories & files removed with 'make mrproper'
-MRPROPER_DIRS  += include/config include2 usr/include
+MRPROPER_DIRS  += include/config include2 usr/include include/generated
 MRPROPER_FILES += .config .config.old include/asm .version .old_version \
                   include/linux/autoconf.h include/linux/version.h      \
                   include/linux/utsrelease.h                            \
@@ -1288,7 +1293,7 @@ help:
 	@echo  '  dir/            - Build all files in dir and below'
 	@echo  '  dir/file.[ois]  - Build specified target only'
 	@echo  '  dir/file.ko     - Build module including final link'
-	@echo  '  prepare         - Set up for building external modules'
+	@echo  '  modules_prepare - Set up for building external modules'
 	@echo  '  tags/TAGS	  - Generate tags file for editors'
 	@echo  '  cscope	  - Generate cscope index'
 	@echo  '  kernelrelease	  - Output the release version string'
@@ -1416,7 +1421,9 @@ $(clean-dirs):
 	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
 
 clean:	rm-dirs := $(MODVERDIR)
-clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
+clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers \
+                   $(KBUILD_EXTMOD)/Module.markers \
+                   $(KBUILD_EXTMOD)/modules.order
 clean: $(clean-dirs)
 	$(call cmd,rmdirs)
 	$(call cmd,rmfiles)

arch/alpha/include/asm/barrier.h

@@ -16,11 +16,13 @@ __asm__ __volatile__("wmb": : :"memory")
 __asm__ __volatile__("mb": : :"memory")
 
 #ifdef CONFIG_SMP
+#define __ASM_SMP_MB	"\tmb\n"
 #define smp_mb()	mb()
 #define smp_rmb()	rmb()
 #define smp_wmb()	wmb()
 #define smp_read_barrier_depends()	read_barrier_depends()
 #else
+#define __ASM_SMP_MB
 #define smp_mb()	barrier()
 #define smp_rmb()	barrier()
 #define smp_wmb()	barrier()

arch/alpha/include/asm/futex.h

@@ -1,6 +1,116 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
+#ifndef _ASM_ALPHA_FUTEX_H
+#define _ASM_ALPHA_FUTEX_H
 
-#include <asm-generic/futex.h>
+#ifdef __KERNEL__
 
-#endif
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+#include <asm/barrier.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
+	__asm__ __volatile__(					\
+		__ASM_SMP_MB					\
+	"1:	ldl_l	%0,0(%2)\n"				\
+		insn						\
+	"2:	stl_c	%1,0(%2)\n"				\
+	"	beq	%1,4f\n"				\
+	"	mov	$31,%1\n"				\
+	"3:	.subsection 2\n"				\
+	"4:	br	1b\n"					\
+	"	.previous\n"					\
+	"	.section __ex_table,\"a\"\n"			\
+	"	.long	1b-.\n"					\
+	"	lda	$31,3b-1b(%1)\n"			\
+	"	.long	2b-.\n"					\
+	"	lda	$31,3b-2b(%1)\n"			\
+	"	.previous\n"					\
+	:	"=&r" (oldval), "=&r"(ret)			\
+	:	"r" (uaddr), "r"(oparg)				\
+	:	"memory")
+
+static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret;
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	pagefault_disable();
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_atomic_op("mov %3,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ADD:
+		__futex_atomic_op("addl %0,%3,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_atomic_op("or %0,%3,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_atomic_op("andnot %0,%3,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_atomic_op("xor %0,%3,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	pagefault_enable();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+	int prev, cmp;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	__asm__ __volatile__ (
+		__ASM_SMP_MB
+	"1:	ldl_l	%0,0(%2)\n"
+	"	cmpeq	%0,%3,%1\n"
+	"	beq	%1,3f\n"
+	"	mov	%4,%1\n"
+	"2:	stl_c	%1,0(%2)\n"
+	"	beq	%1,4f\n"
+	"3:	.subsection 2\n"
+	"4:	br	1b\n"
+	"	.previous\n"
+	"	.section __ex_table,\"a\"\n"
+	"	.long	1b-.\n"
+	"	lda	$31,3b-1b(%0)\n"
+	"	.long	2b-.\n"
+	"	lda	$31,3b-2b(%0)\n"
+	"	.previous\n"
+	:	"=&r"(prev), "=&r"(cmp)
+	:	"r"(uaddr), "r"((long)oldval), "r"(newval)
+	:	"memory");
+
+	return prev;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_ALPHA_FUTEX_H */

arch/alpha/include/asm/percpu.h

@@ -73,6 +73,6 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 
 #endif /* SMP */
 
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu_var(name)
+#include <asm-generic/percpu.h>
 
 #endif /* __ALPHA_PERCPU_H */

arch/alpha/include/asm/uaccess.h

@@ -507,5 +507,7 @@ struct exception_table_entry
 	(pc) + (_fixup)->fixup.bits.nextinsn;			\
 })
 
+#define ARCH_HAS_SORT_EXTABLE
+#define ARCH_HAS_SEARCH_EXTABLE
 
 #endif /* __ALPHA_UACCESS_H */

arch/alpha/kernel/Makefile

@@ -8,7 +8,7 @@ EXTRA_CFLAGS	:= -Werror -Wno-sign-compare
 
 obj-y    := entry.o traps.o process.o init_task.o osf_sys.o irq.o \
 	    irq_alpha.o signal.o setup.o ptrace.o time.o \
-	    alpha_ksyms.o systbls.o err_common.o io.o binfmt_loader.o
+	    alpha_ksyms.o systbls.o err_common.o io.o
 
 obj-$(CONFIG_VGA_HOSE)	+= console.o
 obj-$(CONFIG_SMP)	+= smp.o
@@ -43,6 +43,10 @@ else
 # Misc support
 obj-$(CONFIG_ALPHA_SRM)		+= srmcons.o
 
+ifdef CONFIG_BINFMT_AOUT
+obj-y	+= binfmt_loader.o
+endif
+
 # Core logic support
 obj-$(CONFIG_ALPHA_APECS)	+= core_apecs.o
 obj-$(CONFIG_ALPHA_CIA)		+= core_cia.o

arch/alpha/kernel/binfmt_loader.c

@@ -46,6 +46,6 @@ static struct linux_binfmt loader_format = {
 
 static int __init init_loader_binfmt(void)
 {
-	return register_binfmt(&loader_format);
+	return insert_binfmt(&loader_format);
 }
 arch_initcall(init_loader_binfmt);

arch/alpha/kernel/err_ev6.c

@@ -229,7 +229,7 @@ ev6_process_logout_frame(struct el_common *mchk_header, int print)
 }
 
 void
-ev6_machine_check(u64 vector, u64 la_ptr)
+ev6_machine_check(unsigned long vector, unsigned long la_ptr)
 {
 	struct el_common *mchk_header = (struct el_common *)la_ptr;
 

arch/alpha/kernel/err_ev7.c

@@ -117,7 +117,7 @@ ev7_collect_logout_frame_subpackets(struct el_subpacket *el_ptr,
 }
 
 void
-ev7_machine_check(u64 vector, u64 la_ptr)
+ev7_machine_check(unsigned long vector, unsigned long la_ptr)
 {
 	struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr;
 	char *saved_err_prefix = err_print_prefix;
@@ -246,7 +246,7 @@ ev7_process_pal_subpacket(struct el_subpacket *header)
 
 	switch(header->type) {
 	case EL_TYPE__PAL__LOGOUT_FRAME:
-		printk("%s*** MCHK occurred on LPID %ld (RBOX %llx)\n",
+		printk("%s*** MCHK occurred on LPID %lld (RBOX %llx)\n",
 		       err_print_prefix,
 		       packet->by_type.logout.whami, 
 		       packet->by_type.logout.rbox_whami);

arch/alpha/kernel/err_impl.h

@@ -60,26 +60,26 @@ extern struct ev7_lf_subpackets *
 ev7_collect_logout_frame_subpackets(struct el_subpacket *,
 				    struct ev7_lf_subpackets *);
 extern void ev7_register_error_handlers(void);
-extern void ev7_machine_check(u64, u64);
+extern void ev7_machine_check(unsigned long, unsigned long);
 
 /*
  * err_ev6.c
  */
 extern void ev6_register_error_handlers(void);
 extern int ev6_process_logout_frame(struct el_common *, int);
-extern void ev6_machine_check(u64, u64);
+extern void ev6_machine_check(unsigned long, unsigned long);
 
 /*
  * err_marvel.c
  */
-extern void marvel_machine_check(u64, u64);
+extern void marvel_machine_check(unsigned long, unsigned long);
 extern void marvel_register_error_handlers(void);
 
 /*
  * err_titan.c
  */
 extern int titan_process_logout_frame(struct el_common *, int);
-extern void titan_machine_check(u64, u64);
+extern void titan_machine_check(unsigned long, unsigned long);
 extern void titan_register_error_handlers(void);
 extern int privateer_process_logout_frame(struct el_common *, int);
-extern void privateer_machine_check(u64, u64);
+extern void privateer_machine_check(unsigned long, unsigned long);

arch/alpha/kernel/err_marvel.c

@@ -1042,7 +1042,7 @@ marvel_process_logout_frame(struct ev7_lf_subpackets *lf_subpackets, int print)
 }
 
 void
-marvel_machine_check(u64 vector, u64 la_ptr)
+marvel_machine_check(unsigned long vector, unsigned long la_ptr)
 {
 	struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr;
 	int (*process_frame)(struct ev7_lf_subpackets *, int) = NULL;

arch/alpha/kernel/err_titan.c

@@ -380,7 +380,7 @@ titan_process_logout_frame(struct el_common *mchk_header, int print)
 }
 
 void
-titan_machine_check(u64 vector, u64 la_ptr)
+titan_machine_check(unsigned long vector, unsigned long la_ptr)
 {
 	struct el_common *mchk_header = (struct el_common *)la_ptr;
 	struct el_TITAN_sysdata_mcheck *tmchk =
@@ -702,7 +702,7 @@ privateer_process_logout_frame(struct el_common *mchk_header, int print)
 }
 
 void
-privateer_machine_check(u64 vector, u64 la_ptr)
+privateer_machine_check(unsigned long vector, unsigned long la_ptr)
 {
 	struct el_common *mchk_header = (struct el_common *)la_ptr;
 	struct el_TITAN_sysdata_mcheck *tmchk =

arch/alpha/kernel/head.S

@@ -7,10 +7,11 @@
  * the kernel global pointer and jump to the kernel entry-point.
  */
 
+#include <linux/init.h>
 #include <asm/system.h>
 #include <asm/asm-offsets.h>
 
-.section .text.head, "ax"
+__HEAD
 .globl swapper_pg_dir
 .globl _stext
 swapper_pg_dir=SWAPPER_PGD

arch/alpha/kernel/proto.h

@@ -36,7 +36,6 @@ extern void cia_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
 extern struct pci_ops irongate_pci_ops;
 extern int irongate_pci_clr_err(void);
 extern void irongate_init_arch(void);
-extern void irongate_machine_check(u64, u64);
 #define irongate_pci_tbi ((void *)0)
 
 /* core_lca.c */
@@ -49,7 +48,7 @@ extern void lca_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
 extern struct pci_ops marvel_pci_ops;
 extern void marvel_init_arch(void);
 extern void marvel_kill_arch(int);
-extern void marvel_machine_check(u64, u64);
+extern void marvel_machine_check(unsigned long, unsigned long);
 extern void marvel_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
 extern int marvel_pa_to_nid(unsigned long);
 extern int marvel_cpuid_to_nid(int);
@@ -86,7 +85,7 @@ extern void t2_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
 extern struct pci_ops titan_pci_ops;
 extern void titan_init_arch(void);
 extern void titan_kill_arch(int);
-extern void titan_machine_check(u64, u64);
+extern void titan_machine_check(unsigned long, unsigned long);
 extern void titan_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
 extern struct _alpha_agp_info *titan_agp_info(void);
 

arch/alpha/kernel/vmlinux.lds.S

@@ -16,7 +16,7 @@ SECTIONS
 
 	_text = .;	/* Text and read-only data */
 	.text : {
-	*(.text.head)
+		HEAD_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT

arch/alpha/mm/extable.c

@@ -3,11 +3,49 @@
  */
 
 #include <linux/module.h>
+#include <linux/sort.h>
 #include <asm/uaccess.h>
 
+static inline unsigned long ex_to_addr(const struct exception_table_entry *x)
+{
+	return (unsigned long)&x->insn + x->insn;
+}
+
+static void swap_ex(void *a, void *b, int size)
+{
+	struct exception_table_entry *ex_a = a, *ex_b = b;
+	unsigned long addr_a = ex_to_addr(ex_a), addr_b = ex_to_addr(ex_b);
+	unsigned int t = ex_a->fixup.unit;
+
+	ex_a->fixup.unit = ex_b->fixup.unit;
+	ex_b->fixup.unit = t;
+	ex_a->insn = (int)(addr_b - (unsigned long)&ex_a->insn);
+	ex_b->insn = (int)(addr_a - (unsigned long)&ex_b->insn);
+}
+
+/*
+ * The exception table needs to be sorted so that the binary
+ * search that we use to find entries in it works properly.
+ * This is used both for the kernel exception table and for
+ * the exception tables of modules that get loaded.
+ */
+static int cmp_ex(const void *a, const void *b)
+{
+	const struct exception_table_entry *x = a, *y = b;
+
+	/* avoid overflow */
+	if (ex_to_addr(x) > ex_to_addr(y))
+		return 1;
+	if (ex_to_addr(x) < ex_to_addr(y))
+		return -1;
+	return 0;
+}
+
 void sort_extable(struct exception_table_entry *start,
 		  struct exception_table_entry *finish)
 {
+	sort(start, finish - start, sizeof(struct exception_table_entry),
+	     cmp_ex, swap_ex);
 }
 
 const struct exception_table_entry *
@@ -20,7 +58,7 @@ search_extable(const struct exception_table_entry *first,
 		unsigned long mid_value;
 
 		mid = (last - first) / 2 + first;
-		mid_value = (unsigned long)&mid->insn + mid->insn;
+		mid_value = ex_to_addr(mid);
                 if (mid_value == value)
                         return mid;
                 else if (mid_value < value)

arch/arm/Kconfig

@@ -486,8 +486,6 @@ config ARCH_PXA
 	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
-	select COMMON_CLKDEV
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
@@ -585,6 +583,8 @@ config ARCH_DAVINCI
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
 	select ZONE_DMA
+	select HAVE_IDE
+	select COMMON_CLKDEV
 	help
 	  Support for TI's DaVinci platform.
 
@@ -740,6 +740,56 @@ if !MMU
 source "arch/arm/Kconfig-nommu"
 endif
 
+config ARM_ERRATA_411920
+	bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
+	depends on CPU_V6 && !SMP
+	help
+	  Invalidation of the Instruction Cache operation can
+	  fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
+	  It does not affect the MPCore. This option enables the ARM Ltd.
+	  recommended workaround.
+
+config ARM_ERRATA_430973
+	bool "ARM errata: Stale prediction on replaced interworking branch"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 430973 Cortex-A8
+	  (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb
+	  interworking branch is replaced with another code sequence at the
+	  same virtual address, whether due to self-modifying code or virtual
+	  to physical address re-mapping, Cortex-A8 does not recover from the
+	  stale interworking branch prediction. This results in Cortex-A8
+	  executing the new code sequence in the incorrect ARM or Thumb state.
+	  The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
+	  and also flushes the branch target cache at every context switch.
+	  Note that setting specific bits in the ACTLR register may not be
+	  available in non-secure mode.
+
+config ARM_ERRATA_458693
+	bool "ARM errata: Processor deadlock when a false hazard is created"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 458693 Cortex-A8 (r2p0)
+	  erratum. For very specific sequences of memory operations, it is
+	  possible for a hazard condition intended for a cache line to instead
+	  be incorrectly associated with a different cache line. This false
+	  hazard might then cause a processor deadlock. The workaround enables
+	  the L1 caching of the NEON accesses and disables the PLD instruction
+	  in the ACTLR register. Note that setting specific bits in the ACTLR
+	  register may not be available in non-secure mode.
+
+config ARM_ERRATA_460075
+	bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 460075 Cortex-A8 (r2p0)
+	  erratum. Any asynchronous access to the L2 cache may encounter a
+	  situation in which recent store transactions to the L2 cache are lost
+	  and overwritten with stale memory contents from external memory. The
+	  workaround disables the write-allocate mode for the L2 cache via the
+	  ACTLR register. Note that setting specific bits in the ACTLR register
+	  may not be available in non-secure mode.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
@@ -1171,12 +1221,6 @@ config CPU_FREQ_IMX
 
 	  If in doubt, say N.
 
-config CPU_FREQ_PXA
-	bool
-	depends on CPU_FREQ && ARCH_PXA && PXA25x
-	default y
-	select CPU_FREQ_DEFAULT_GOV_USERSPACE
-
 endif
 
 source "drivers/cpuidle/Kconfig"

arch/arm/common/vic.c

@@ -85,12 +85,11 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
 
 	for (i = 0; i < 32; i++) {
-		unsigned int irq = irq_start + i;
-
-		set_irq_chip(irq, &vic_chip);
-		set_irq_chip_data(irq, base);
-
 		if (vic_sources & (1 << i)) {
+			unsigned int irq = irq_start + i;
+
+			set_irq_chip(irq, &vic_chip);
+			set_irq_chip_data(irq, base);
 			set_irq_handler(irq, handle_level_irq);
 			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 		}

arch/arm/configs/davinci_all_defconfig

@@ -0,0 +1,1784 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 15 08:16:53 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_DAVINCI=y
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI DaVinci Implementations
+#
+
+#
+# DaVinci Core Type
+#
+CONFIG_ARCH_DAVINCI_DM644x=y
+
+#
+# DaVinci Board Type
+#
+CONFIG_MACH_DAVINCI_EVM=y
+CONFIG_DAVINCI_MUX=y
+CONFIG_DAVINCI_MUX_DEBUG=y
+CONFIG_DAVINCI_MUX_WARNINGS=y
+CONFIG_DAVINCI_RESET_CLOCKS=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+# CONFIG_LEDS_CPU is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=m
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=m
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=m
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_DAVINCI=m
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=m
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_TIMINGS=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=m
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+CONFIG_BLK_DEV_PALMCHIP_BK3710=m
+CONFIG_BLK_DEV_IDEDMA=y
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_LXT_PHY=y
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+CONFIG_LSI_ET1011C_PHY=y
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DAVINCI=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+CONFIG_GPIO_PCF857X=m
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_DAVINCI_WATCHDOG=m
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=m
+# CONFIG_SND_DAVINCI_SOC is not set
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=m
+# CONFIG_HID_KYE is not set
+CONFIG_HID_GYRATION=m
+# CONFIG_HID_KENSINGTON is not set
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=m
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_SOC=y
+
+#
+# DaVinci 35x and 644x USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_MUSB_PIO_ONLY=y
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_G_PRINTER=m
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

arch/arm/configs/imx27ads_defconfig

@@ -1,826 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Fri Jun 20 16:29:34 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-CONFIG_ARCH_MX2=y
-# CONFIG_ARCH_MX3 is not set
-
-#
-# MX2 family CPU support
-#
-CONFIG_MACH_MX27=y
-
-#
-# MX2 Platforms
-#
-CONFIG_MACH_MX27ADS=y
-# CONFIG_MACH_PCM038 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_FEC_OLD is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_IMX is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y

arch/arm/configs/mx31ads_defconfig → arch/arm/configs/mx1_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Fri Jun 20 16:21:11 2008
+# Linux kernel version: 2.6.30-rc1
+# Wed Apr  8 11:11:33 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -12,6 +12,7 @@ CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -21,9 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -43,15 +43,24 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -59,26 +68,26 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -88,11 +97,10 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -100,12 +108,10 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -119,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -129,11 +135,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -145,55 +150,55 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_ARCH_MX1ADS=y
 
 #
 # Freescale MXC Implementations
 #
+CONFIG_ARCH_MX1=y
 # CONFIG_ARCH_MX2 is not set
-CONFIG_ARCH_MX3=y
+# CONFIG_ARCH_MX3 is not set
 
 #
-# MX3 Options
+# MX1 platforms:
 #
-CONFIG_MACH_MX31ADS=y
-# CONFIG_MACH_PCM037 is not set
+CONFIG_MACH_MXLADS=y
+CONFIG_MACH_SCB9328=y
+CONFIG_MXC_IRQ_PRIOR=y
+# CONFIG_MXC_PWM is not set
 
 #
 # Processor Type
 #
 CONFIG_CPU_32=y
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
 CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
 CONFIG_CPU_CP15_MMU=y
 
@@ -203,7 +208,7 @@ CONFIG_CPU_CP15_MMU=y
 CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_OUTER_CACHE is not set
 
 #
@@ -220,25 +225,32 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -250,6 +262,11 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
 #
 # Floating point emulation
 #
@@ -257,24 +274,30 @@ CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
 #
 # At least one emulation must be selected
 #
-CONFIG_VFP=y
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -283,11 +306,6 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -306,12 +324,11 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -324,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -333,7 +351,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -344,14 +364,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -366,16 +380,16 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -399,36 +413,31 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 # CONFIG_MTD_JEDECPROBE is not set
 CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
 # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
+# CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -446,16 +455,14 @@ CONFIG_MTD_RAM=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
 #
 # UBI - Unsorted block images
 #
@@ -476,23 +483,51 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -502,7 +537,10 @@ CONFIG_MII=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -542,46 +580,124 @@ CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# GPIO Support
+# Memory mapped GPIO expanders:
 #
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
 
 #
 # SPI GPIO expanders:
 #
-# CONFIG_W1 is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=y
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -604,36 +720,131 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
-# Sound
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_IMX=y
+CONFIG_USB_IMX=y
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
 #
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -642,6 +853,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -660,15 +876,13 @@ CONFIG_INOTIFY_USER=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -687,25 +901,30 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
@@ -724,9 +943,9 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -734,8 +953,31 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_USER is not set
 
 #
@@ -743,15 +985,28 @@ CONFIG_FRAME_POINTER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -766,7 +1021,7 @@ CONFIG_CRYPTO=y
 #
 # Block modes
 #
-# CONFIG_CRYPTO_CBC is not set
+CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_CTR is not set
 # CONFIG_CRYPTO_CTS is not set
 # CONFIG_CRYPTO_ECB is not set
@@ -785,8 +1040,12 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -803,7 +1062,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
+CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_SALSA20 is not set
@@ -816,24 +1075,31 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
-# CONFIG_CRYPTO_HW is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

arch/arm/configs/pcm038_defconfig → arch/arm/configs/mx27_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Fri Jun 20 16:38:36 2008
+# Linux kernel version: 2.6.30-rc1
+# Wed Apr  8 10:18:06 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -12,6 +12,7 @@ CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -21,9 +22,8 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -40,47 +40,58 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_RT_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -88,11 +99,10 @@ CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -100,12 +110,10 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -119,7 +127,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -129,11 +137,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -145,46 +152,44 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # Freescale MXC Implementations
 #
+# CONFIG_ARCH_MX1 is not set
 CONFIG_ARCH_MX2=y
 # CONFIG_ARCH_MX3 is not set
-
-#
-# MX2 family CPU support
-#
+# CONFIG_MACH_MX21 is not set
 CONFIG_MACH_MX27=y
 
 #
-# MX2 Platforms
+# MX2 platforms:
 #
-# CONFIG_MACH_MX27ADS is not set
+CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
 CONFIG_MACH_PCM970_BASEBOARD=y
+CONFIG_MXC_IRQ_PRIOR=y
+CONFIG_MXC_PWM=y
 
 #
 # Processor Type
@@ -209,6 +214,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
 # CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -224,25 +230,32 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -254,6 +267,11 @@ CONFIG_CMDLINE=""
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
 #
 # Floating point emulation
 #
@@ -261,24 +279,33 @@ CONFIG_CMDLINE=""
 #
 # At least one emulation must be selected
 #
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
 # CONFIG_VFP is not set
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -293,7 +320,7 @@ CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
 # CONFIG_IP_PNP_BOOTP is not set
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
@@ -323,6 +350,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -332,26 +360,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -366,12 +391,15 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -426,9 +454,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -451,6 +477,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
 #
 # UBI - Unsorted block images
 #
@@ -477,7 +508,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -491,12 +522,20 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_FEC_OLD=y
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -505,7 +544,10 @@ CONFIG_FEC_OLD=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -541,12 +583,15 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -559,6 +604,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -573,42 +619,55 @@ CONFIG_DEVKMEM=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 # CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -622,47 +681,83 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# GPIO Support
+# Memory mapped GPIO expanders:
 #
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
+#
+# PCI GPIO expanders:
+#
+
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=y
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -683,7 +778,7 @@ CONFIG_VIDEO_MEDIA=y
 #
 # CONFIG_MEDIA_ATTACH is not set
 CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
 CONFIG_MEDIA_TUNER_SIMPLE=y
 CONFIG_MEDIA_TUNER_TDA8290=y
 CONFIG_MEDIA_TUNER_TDA9887=y
@@ -692,16 +787,17 @@ CONFIG_MEDIA_TUNER_TEA5767=y
 CONFIG_MEDIA_TUNER_MT20XX=y
 CONFIG_MEDIA_TUNER_XC2028=y
 CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
 CONFIG_VIDEO_V4L2=y
 CONFIG_VIDEO_V4L1=y
 CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_SAA5246A is not set
 # CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
 # CONFIG_SOC_CAMERA is not set
 # CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
@@ -714,9 +810,10 @@ CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
@@ -732,8 +829,12 @@ CONFIG_FB=y
 #
 # Frame buffer hardware drivers
 #
+CONFIG_FB_IMX=y
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -761,14 +862,29 @@ CONFIG_FONT_8x8=y
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -800,42 +916,56 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -843,6 +973,11 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -861,15 +996,13 @@ CONFIG_RTC_DRV_PCF8563=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -889,25 +1022,27 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -972,12 +1107,41 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_USER is not set
 
 #
@@ -985,24 +1149,26 @@ CONFIG_FRAME_POINTER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

arch/arm/configs/viper_defconfig

@@ -298,7 +298,6 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
 
 #
 # Floating point emulation

arch/arm/include/asm/tlb.h

@@ -36,6 +36,8 @@
 struct mmu_gather {
 	struct mm_struct	*mm;
 	unsigned int		fullmm;
+	unsigned long		range_start;
+	unsigned long		range_end;
 };
 
 DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
@@ -63,7 +65,19 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
 	put_cpu_var(mmu_gathers);
 }
 
-#define tlb_remove_tlb_entry(tlb,ptep,address)	do { } while (0)
+/*
+ * Memorize the range for the TLB flush.
+ */
+static inline void
+tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr)
+{
+	if (!tlb->fullmm) {
+		if (addr < tlb->range_start)
+			tlb->range_start = addr;
+		if (addr + PAGE_SIZE > tlb->range_end)
+			tlb->range_end = addr + PAGE_SIZE;
+	}
+}
 
 /*
  * In the case of tlb vma handling, we can optimise these away in the
@@ -73,15 +87,18 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
 static inline void
 tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 {
-	if (!tlb->fullmm)
+	if (!tlb->fullmm) {
 		flush_cache_range(vma, vma->vm_start, vma->vm_end);
+		tlb->range_start = TASK_SIZE;
+		tlb->range_end = 0;
+	}
 }
 
 static inline void
 tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 {
-	if (!tlb->fullmm)
-		flush_tlb_range(vma, vma->vm_start, vma->vm_end);
+	if (!tlb->fullmm && tlb->range_end > 0)
+		flush_tlb_range(vma, tlb->range_start, tlb->range_end);
 }
 
 #define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)

arch/arm/include/asm/unistd.h

@@ -387,6 +387,8 @@
 #define __NR_dup3			(__NR_SYSCALL_BASE+358)
 #define __NR_pipe2			(__NR_SYSCALL_BASE+359)
 #define __NR_inotify_init1		(__NR_SYSCALL_BASE+360)
+#define __NR_preadv			(__NR_SYSCALL_BASE+361)
+#define __NR_pwritev			(__NR_SYSCALL_BASE+362)
 
 /*
  * The following SWIs are ARM private.

arch/arm/kernel/calls.S

@@ -370,6 +370,8 @@
 		CALL(sys_dup3)
 		CALL(sys_pipe2)
 /* 360 */	CALL(sys_inotify_init1)
+		CALL(sys_preadv)
+		CALL(sys_pwritev)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted

arch/arm/kernel/sys_oabi-compat.c

@@ -83,6 +83,7 @@
 #include <linux/net.h>
 #include <linux/ipc.h>
 #include <linux/uaccess.h>
+#include <linux/slab.h>
 
 struct oldabi_stat64 {
 	unsigned long long st_dev;
@@ -176,21 +177,12 @@ asmlinkage long sys_oabi_fstatat64(int dfd,
 				   int flag)
 {
 	struct kstat stat;
-	int error = -EINVAL;
+	int error;
 
-	if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
-		goto out;
-
-	if (flag & AT_SYMLINK_NOFOLLOW)
-		error = vfs_lstat_fd(dfd, filename, &stat);
-	else
-		error = vfs_stat_fd(dfd, filename, &stat);
-
-	if (!error)
-	error = cp_oldabi_stat64(&stat, statbuf);
-
-out:
-	return error;
+	error = vfs_fstatat(dfd, filename, &stat, flag);
+	if (error)
+		return error;
+	return cp_oldabi_stat64(&stat, statbuf);
 }
 
 struct oabi_flock64 {

arch/arm/mach-at91/at91rm9200_time.c

@@ -85,7 +85,7 @@ static struct irqaction at91rm9200_timer_irq = {
 	.handler	= at91rm9200_timer_interrupt
 };
 
-static cycle_t read_clk32k(void)
+static cycle_t read_clk32k(struct clocksource *cs)
 {
 	return read_CRTR();
 }

arch/arm/mach-at91/at91sam926x_time.c

@@ -31,7 +31,7 @@ static u32 pit_cnt;		/* access only w/system irq blocked */
  * Clocksource:  just a monotonic counter of MCK/16 cycles.
  * We don't care whether or not PIT irqs are enabled.
  */
-static cycle_t read_pit_clk(void)
+static cycle_t read_pit_clk(struct clocksource *cs)
 {
 	unsigned long flags;
 	u32 elapsed;

arch/arm/mach-davinci/Kconfig

@@ -4,19 +4,56 @@ menu "TI DaVinci Implementations"
 
 comment "DaVinci Core Type"
 
-config ARCH_DAVINCI644x
-	default y
+config ARCH_DAVINCI_DM644x
 	bool "DaVinci 644x based system"
 
 comment "DaVinci Board Type"
 
 config MACH_DAVINCI_EVM
-	bool "TI DaVinci EVM"
+	bool "TI DM644x EVM"
 	default y
-	depends on ARCH_DAVINCI644x
+	depends on ARCH_DAVINCI_DM644x
 	help
 	  Configure this option to specify the whether the board used
-	  for development is a DaVinci EVM
+	  for development is a DM644x EVM
+
+
+config DAVINCI_MUX
+	bool "DAVINCI multiplexing support"
+	depends on ARCH_DAVINCI
+	default y
+	help
+	  Pin multiplexing support for DAVINCI boards. If your bootloader
+	  sets the multiplexing correctly, say N. Otherwise, or if unsure,
+	  say Y.
+
+config DAVINCI_MUX_DEBUG
+        bool "Multiplexing debug output"
+        depends on DAVINCI_MUX
+        help
+          Makes the multiplexing functions print out a lot of debug info.
+          This is useful if you want to find out the correct values of the
+          multiplexing registers.
+
+config DAVINCI_MUX_WARNINGS
+        bool "Warn about pins the bootloader didn't set up"
+        depends on DAVINCI_MUX
+        help
+          Choose Y here to warn whenever driver initialization logic needs
+          to change the pin multiplexing setup.  When there are no warnings
+          printed, it's safe to deselect DAVINCI_MUX for your product.
+
+config DAVINCI_RESET_CLOCKS
+	bool "Reset unused clocks during boot"
+	depends on ARCH_DAVINCI
+	help
+	  Say Y if you want to reset unused clocks during boot.
+	  This option saves power, but assumes all drivers are
+	  using the clock framework. Broken drivers that do not
+	  yet use clock framework may not work with this option.
+	  If you are booting from another operating system, you
+	  probably do not want this option enabled until your
+	  device drivers work properly.
 
 endmenu
 

arch/arm/mach-davinci/Makefile

@@ -5,7 +5,12 @@
 
 # Common objects
 obj-y 			:= time.o irq.o clock.o serial.o io.o id.o psc.o \
-			   gpio.o mux.o devices.o usb.o
+			   gpio.o devices.o dma.o usb.o
+
+obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
+
+# Chip specific
+obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o
 
 # Board specific
-obj-$(CONFIG_MACH_DAVINCI_EVM)  += board-evm.o
+obj-$(CONFIG_MACH_DAVINCI_EVM)  	+= board-dm644x-evm.o

arch/arm/mach-davinci/board-evm.c → arch/arm/mach-davinci/board-dm644x-evm.c

@@ -15,15 +15,20 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
+#include <linux/memory.h>
+#include <linux/etherdevice.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c/pcf857x.h>
 #include <linux/i2c/at24.h>
 
 #include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
+#include <linux/phy.h>
+#include <linux/clk.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -32,25 +37,34 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/hardware.h>
+#include <mach/dm644x.h>
 #include <mach/common.h>
 #include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/mux.h>
+#include <mach/psc.h>
+#include <mach/nand.h>
 
-/* other misc. init functions */
-void __init davinci_psc_init(void);
-void __init davinci_irq_init(void);
-void __init davinci_map_common_io(void);
-void __init davinci_init_common_hw(void);
+#define DM644X_EVM_PHY_MASK		(0x2)
+#define DM644X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
 
-#if defined(CONFIG_MTD_PHYSMAP) || \
-    defined(CONFIG_MTD_PHYSMAP_MODULE)
+#define DAVINCI_CFC_ATA_BASE		  0x01C66000
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE   0x01e00000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE  0x02000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE  0x04000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE  0x06000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE  0x08000000
+
+#define LXT971_PHY_ID	(0x001378e2)
+#define LXT971_PHY_MASK	(0xfffffff0)
 
 static struct mtd_partition davinci_evm_norflash_partitions[] = {
-	/* bootloader (U-Boot, etc) in first 4 sectors */
+	/* bootloader (UBL, U-Boot, etc) in first 5 sectors */
 	{
 		.name		= "bootloader",
 		.offset		= 0,
-		.size		= 4 * SZ_64K,
+		.size		= 5 * SZ_64K,
 		.mask_flags	= MTD_WRITEABLE, /* force read-only */
 	},
 	/* bootloader params in the next 1 sectors */
@@ -100,10 +114,89 @@ static struct platform_device davinci_evm_norflash_device = {
 	.resource	= &davinci_evm_norflash_resource,
 };
 
-#endif
+/* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks).
+ * It may used instead of the (default) NOR chip to boot, using TI's
+ * tools to install the secondary boot loader (UBL) and U-Boot.
+ */
+struct mtd_partition davinci_evm_nandflash_partition[] = {
+	/* Bootloader layout depends on whose u-boot is installed, but we
+	 * can hide all the details.
+	 *  - block 0 for u-boot environment ... in mainline u-boot
+	 *  - block 1 for UBL (plus up to four backup copies in blocks 2..5)
+	 *  - blocks 6...? for u-boot
+	 *  - blocks 16..23 for u-boot environment ... in TI's u-boot
+	 */
+	{
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= SZ_256K + SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	/* Kernel */
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+		.mask_flags	= 0,
+	},
+	/* File system (older GIT kernels started this on the 5MB mark) */
+	{
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+	/* A few blocks at end hold a flash BBT ... created by TI's CCS
+	 * using flashwriter_nand.out, but ignored by TI's versions of
+	 * Linux and u-boot.  We boot faster by using them.
+	 */
+};
 
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
-    defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+static struct davinci_nand_pdata davinci_evm_nandflash_data = {
+	.parts		= davinci_evm_nandflash_partition,
+	.nr_parts	= ARRAY_SIZE(davinci_evm_nandflash_partition),
+	.ecc_mode	= NAND_ECC_HW,
+	.options	= NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_evm_nandflash_resource[] = {
+	{
+		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_evm_nandflash_device = {
+	.name		= "davinci_nand",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &davinci_evm_nandflash_data,
+	},
+	.num_resources	= ARRAY_SIZE(davinci_evm_nandflash_resource),
+	.resource	= davinci_evm_nandflash_resource,
+};
+
+static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device davinci_fb_device = {
+	.name		= "davincifb",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &davinci_fb_dma_mask,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+	},
+	.num_resources = 0,
+};
+
+static struct platform_device rtc_dev = {
+	.name           = "rtc_davinci_evm",
+	.id             = -1,
+};
 
 static struct resource ide_resources[] = {
 	{
@@ -118,7 +211,7 @@ static struct resource ide_resources[] = {
 	},
 };
 
-static u64 ide_dma_mask = DMA_BIT_MASK(32);
+static u64 ide_dma_mask = DMA_32BIT_MASK;
 
 static struct platform_device ide_dev = {
 	.name           = "palm_bk3710",
@@ -127,12 +220,10 @@ static struct platform_device ide_dev = {
 	.num_resources  = ARRAY_SIZE(ide_resources),
 	.dev = {
 		.dma_mask		= &ide_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
+		.coherent_dma_mask      = DMA_32BIT_MASK,
 	},
 };
 
-#endif
-
 /*----------------------------------------------------------------------*/
 
 /*
@@ -311,7 +402,9 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
 	gpio_request(gpio + 7, "nCF_SEL");
 	gpio_direction_output(gpio + 7, 1);
 
-	/* irlml6401 sustains over 3A, switches 5V in under 8 msec */
+	/* irlml6401 switches over 1A, in under 8 msec;
+	 * now it can be managed by nDRV_VBUS ...
+	 */
 	setup_usb(500, 8);
 
 	return 0;
@@ -343,13 +436,119 @@ static struct pcf857x_platform_data pcf_data_u35 = {
  *  - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
  *  - ... newer boards may have more
  */
+static struct memory_accessor *at24_mem_acc;
+
+static void at24_setup(struct memory_accessor *mem_acc, void *context)
+{
+	DECLARE_MAC_BUF(mac_str);
+	char mac_addr[6];
+
+	at24_mem_acc = mem_acc;
+
+	/* Read MAC addr from EEPROM */
+	if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) {
+		printk(KERN_INFO "Read MAC addr from EEPROM: %s\n",
+		       print_mac(mac_str, mac_addr));
+	}
+}
+
 static struct at24_platform_data eeprom_info = {
 	.byte_len	= (256*1024) / 8,
 	.page_size	= 64,
 	.flags		= AT24_FLAG_ADDR16,
+	.setup          = at24_setup,
 };
 
+int dm6446evm_eeprom_read(void *buf, off_t off, size_t count)
+{
+	if (at24_mem_acc)
+		return at24_mem_acc->read(at24_mem_acc, buf, off, count);
+	return -ENODEV;
+}
+EXPORT_SYMBOL(dm6446evm_eeprom_read);
+
+int dm6446evm_eeprom_write(void *buf, off_t off, size_t count)
+{
+	if (at24_mem_acc)
+		return at24_mem_acc->write(at24_mem_acc, buf, off, count);
+	return -ENODEV;
+}
+EXPORT_SYMBOL(dm6446evm_eeprom_write);
+
+/*
+ * MSP430 supports RTC, card detection, input from IR remote, and
+ * a bit more.  It triggers interrupts on GPIO(7) from pressing
+ * buttons on the IR remote, and for card detect switches.
+ */
+static struct i2c_client *dm6446evm_msp;
+
+static int dm6446evm_msp_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	dm6446evm_msp = client;
+	return 0;
+}
+
+static int dm6446evm_msp_remove(struct i2c_client *client)
+{
+	dm6446evm_msp = NULL;
+	return 0;
+}
+
+static const struct i2c_device_id dm6446evm_msp_ids[] = {
+	{ "dm6446evm_msp", 0, },
+	{ /* end of list */ },
+};
+
+static struct i2c_driver dm6446evm_msp_driver = {
+	.driver.name	= "dm6446evm_msp",
+	.id_table	= dm6446evm_msp_ids,
+	.probe		= dm6446evm_msp_probe,
+	.remove		= dm6446evm_msp_remove,
+};
+
+static int dm6444evm_msp430_get_pins(void)
+{
+	static const char txbuf[2] = { 2, 4, };
+	char buf[4];
+	struct i2c_msg msg[2] = {
+		{
+			.addr = dm6446evm_msp->addr,
+			.flags = 0,
+			.len = 2,
+			.buf = (void __force *)txbuf,
+		},
+		{
+			.addr = dm6446evm_msp->addr,
+			.flags = I2C_M_RD,
+			.len = 4,
+			.buf = buf,
+		},
+	};
+	int status;
+
+	if (!dm6446evm_msp)
+		return -ENXIO;
+
+	/* Command 4 == get input state, returns port 2 and port3 data
+	 *   S Addr W [A] len=2 [A] cmd=4 [A]
+	 *   RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P
+	 */
+	status = i2c_transfer(dm6446evm_msp->adapter, msg, 2);
+	if (status < 0)
+		return status;
+
+	dev_dbg(&dm6446evm_msp->dev,
+		"PINS: %02x %02x %02x %02x\n",
+		buf[0], buf[1], buf[2], buf[3]);
+
+	return (buf[3] << 8) | buf[2];
+}
+
 static struct i2c_board_info __initdata i2c_info[] =  {
+	{
+		I2C_BOARD_INFO("dm6446evm_msp", 0x23),
+	},
 	{
 		I2C_BOARD_INFO("pcf8574", 0x38),
 		.platform_data	= &pcf_data_u2,
@@ -368,7 +567,6 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 	},
 	/* ALSO:
 	 * - tvl320aic33 audio codec (0x1b)
-	 * - msp430 microcontroller (0x23)
 	 * - tvp5146 video decoder (0x5d)
 	 */
 };
@@ -384,51 +582,109 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 static void __init evm_init_i2c(void)
 {
 	davinci_init_i2c(&i2c_pdata);
+	i2c_add_driver(&dm6446evm_msp_driver);
 	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
 }
 
 static struct platform_device *davinci_evm_devices[] __initdata = {
-#if defined(CONFIG_MTD_PHYSMAP) || \
-    defined(CONFIG_MTD_PHYSMAP_MODULE)
-	&davinci_evm_norflash_device,
-#endif
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
-    defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
-	&ide_dev,
-#endif
+	&davinci_fb_device,
+	&rtc_dev,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
 };
 
 static void __init
 davinci_evm_map_io(void)
 {
 	davinci_map_common_io();
+	dm644x_init();
 }
 
-static __init void davinci_evm_init(void)
+static int davinci_phy_fixup(struct phy_device *phydev)
 {
-	davinci_psc_init();
+	unsigned int control;
+	/* CRITICAL: Fix for increasing PHY signal drive strength for
+	 * TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY
+	 * signal strength was low causing  TX to fail randomly. The
+	 * fix is to Set bit 11 (Increased MII drive strength) of PHY
+	 * register 26 (Digital Config register) on this phy. */
+	control = phy_read(phydev, 26);
+	phy_write(phydev, 26, (control | 0x800));
+	return 0;
+}
 
 #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
     defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+#define HAS_ATA 1
+#else
+#define HAS_ATA 0
+#endif
+
 #if defined(CONFIG_MTD_PHYSMAP) || \
     defined(CONFIG_MTD_PHYSMAP_MODULE)
-	printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, "
-	       "but share pins.\n\t Disable IDE for NOR support.\n");
+#define HAS_NOR 1
+#else
+#define HAS_NOR 0
 #endif
+
+#if defined(CONFIG_MTD_NAND_DAVINCI) || \
+    defined(CONFIG_MTD_NAND_DAVINCI_MODULE)
+#define HAS_NAND 1
+#else
+#define HAS_NAND 0
 #endif
 
+static __init void davinci_evm_init(void)
+{
+	struct clk *aemif_clk;
+
+	aemif_clk = clk_get(NULL, "aemif");
+	clk_enable(aemif_clk);
+
+	if (HAS_ATA) {
+		if (HAS_NAND || HAS_NOR)
+			pr_warning("WARNING: both IDE and Flash are "
+				"enabled, but they share AEMIF pins.\n"
+				"\tDisable IDE for NAND/NOR support.\n");
+		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+		davinci_cfg_reg(DM644X_ATAEN);
+		davinci_cfg_reg(DM644X_HDIREN);
+		platform_device_register(&ide_dev);
+	} else if (HAS_NAND || HAS_NOR) {
+		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+		davinci_cfg_reg(DM644X_ATAEN_DISABLE);
+
+		/* only one device will be jumpered and detected */
+		if (HAS_NAND) {
+			platform_device_register(&davinci_evm_nandflash_device);
+			evm_leds[7].default_trigger = "nand-disk";
+			if (HAS_NOR)
+				pr_warning("WARNING: both NAND and NOR flash "
+					"are enabled; disable one of them.\n");
+		} else if (HAS_NOR)
+			platform_device_register(&davinci_evm_norflash_device);
+	}
+
 	platform_add_devices(davinci_evm_devices,
 			     ARRAY_SIZE(davinci_evm_devices));
 	evm_init_i2c();
+
+	davinci_serial_init(&uart_config);
+
+	/* Register the fixup for PHY on DaVinci */
+	phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
+					davinci_phy_fixup);
+
 }
 
 static __init void davinci_evm_irq_init(void)
 {
-	davinci_init_common_hw();
 	davinci_irq_init();
 }
 
-MACHINE_START(DAVINCI_EVM, "DaVinci EVM")
+MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
 	/* Maintainer: MontaVista Software <source@mvista.com> */
 	.phys_io      = IO_PHYS,
 	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,

arch/arm/mach-davinci/clock.c

@@ -1,7 +1,8 @@
 /*
- * TI DaVinci clock config file
+ * Clock and PLL control for DaVinci devices
  *
- * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2006-2007 Texas Instruments.
+ * Copyright (C) 2008-2009 Deep Root Systems, LLC
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -13,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/errno.h>
+#include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
@@ -21,98 +23,50 @@
 #include <mach/hardware.h>
 
 #include <mach/psc.h>
+#include <mach/cputype.h>
 #include "clock.h"
 
-/* PLL/Reset register offsets */
-#define PLLM		0x110
-
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
 static DEFINE_SPINLOCK(clockfw_lock);
 
-static unsigned int commonrate;
-static unsigned int armrate;
-static unsigned int fixedrate = 27000000;	/* 27 MHZ */
-
-extern void davinci_psc_config(unsigned int domain, unsigned int id, char enable);
-
-/*
- * Returns a clock. Note that we first try to use device id on the bus
- * and clock name. If this fails, we try to use clock name only.
- */
-struct clk *clk_get(struct device *dev, const char *id)
+static unsigned psc_domain(struct clk *clk)
 {
-	struct clk *p, *clk = ERR_PTR(-ENOENT);
-	int idno;
-
-	if (dev == NULL || dev->bus != &platform_bus_type)
-		idno = -1;
-	else
-		idno = to_platform_device(dev)->id;
-
-	mutex_lock(&clocks_mutex);
-
-	list_for_each_entry(p, &clocks, node) {
-		if (p->id == idno &&
-		    strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
-			clk = p;
-			goto found;
-		}
-	}
-
-	list_for_each_entry(p, &clocks, node) {
-		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
-			clk = p;
-			break;
-		}
-	}
-
-found:
-	mutex_unlock(&clocks_mutex);
-
-	return clk;
+	return (clk->flags & PSC_DSP)
+		? DAVINCI_GPSC_DSPDOMAIN
+		: DAVINCI_GPSC_ARMDOMAIN;
 }
-EXPORT_SYMBOL(clk_get);
 
-void clk_put(struct clk *clk)
+static void __clk_enable(struct clk *clk)
 {
-	if (clk && !IS_ERR(clk))
-		module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
-
-static int __clk_enable(struct clk *clk)
-{
-	if (clk->flags & ALWAYS_ENABLED)
-		return 0;
-
-	davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 1);
-	return 0;
+	if (clk->parent)
+		__clk_enable(clk->parent);
+	if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
+		davinci_psc_config(psc_domain(clk), clk->lpsc, 1);
 }
 
 static void __clk_disable(struct clk *clk)
 {
-	if (clk->usecount)
+	if (WARN_ON(clk->usecount == 0))
 		return;
-
-	davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 0);
+	if (--clk->usecount == 0 && !(clk->flags & CLK_PLL))
+		davinci_psc_config(psc_domain(clk), clk->lpsc, 0);
+	if (clk->parent)
+		__clk_disable(clk->parent);
 }
 
 int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
-	int ret = 0;
 
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
 
-	if (clk->usecount++ == 0) {
-		spin_lock_irqsave(&clockfw_lock, flags);
-		ret = __clk_enable(clk);
-		spin_unlock_irqrestore(&clockfw_lock, flags);
-	}
+	spin_lock_irqsave(&clockfw_lock, flags);
+	__clk_enable(clk);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
 
-	return ret;
+	return 0;
 }
 EXPORT_SYMBOL(clk_enable);
 
@@ -123,11 +77,9 @@ void clk_disable(struct clk *clk)
 	if (clk == NULL || IS_ERR(clk))
 		return;
 
-	if (clk->usecount > 0 && !(--clk->usecount)) {
-		spin_lock_irqsave(&clockfw_lock, flags);
-		__clk_disable(clk);
-		spin_unlock_irqrestore(&clockfw_lock, flags);
-	}
+	spin_lock_irqsave(&clockfw_lock, flags);
+	__clk_disable(clk);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);
 
@@ -136,7 +88,7 @@ unsigned long clk_get_rate(struct clk *clk)
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
 
-	return *(clk->rate);
+	return clk->rate;
 }
 EXPORT_SYMBOL(clk_get_rate);
 
@@ -145,7 +97,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
 
-	return *(clk->rate);
+	return clk->rate;
 }
 EXPORT_SYMBOL(clk_round_rate);
 
@@ -164,10 +116,23 @@ int clk_register(struct clk *clk)
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
 
+	if (WARN(clk->parent && !clk->parent->rate,
+			"CLK: %s parent %s has no rate!\n",
+			clk->name, clk->parent->name))
+		return -EINVAL;
+
 	mutex_lock(&clocks_mutex);
-	list_add(&clk->node, &clocks);
+	list_add_tail(&clk->node, &clocks);
 	mutex_unlock(&clocks_mutex);
 
+	/* If rate is already set, use it */
+	if (clk->rate)
+		return 0;
+
+	/* Otherwise, default to parent rate */
+	if (clk->parent)
+		clk->rate = clk->parent->rate;
+
 	return 0;
 }
 EXPORT_SYMBOL(clk_register);
@@ -183,84 +148,150 @@ void clk_unregister(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_unregister);
 
-static struct clk davinci_clks[] = {
-	{
-		.name = "ARMCLK",
-		.rate = &armrate,
-		.lpsc = -1,
-		.flags = ALWAYS_ENABLED,
-	},
-	{
-		.name = "UART",
-		.rate = &fixedrate,
-		.lpsc = DAVINCI_LPSC_UART0,
-	},
-	{
-		.name = "EMACCLK",
-		.rate = &commonrate,
-		.lpsc = DAVINCI_LPSC_EMAC_WRAPPER,
-	},
-	{
-		.name = "I2CCLK",
-		.rate = &fixedrate,
-		.lpsc = DAVINCI_LPSC_I2C,
-	},
-	{
-		.name = "IDECLK",
-		.rate = &commonrate,
-		.lpsc = DAVINCI_LPSC_ATA,
-	},
-	{
-		.name = "McBSPCLK",
-		.rate = &commonrate,
-		.lpsc = DAVINCI_LPSC_McBSP,
-	},
-	{
-		.name = "MMCSDCLK",
-		.rate = &commonrate,
-		.lpsc = DAVINCI_LPSC_MMC_SD,
-	},
-	{
-		.name = "SPICLK",
-		.rate = &commonrate,
-		.lpsc = DAVINCI_LPSC_SPI,
-	},
-	{
-		.name = "gpio",
-		.rate = &commonrate,
-		.lpsc = DAVINCI_LPSC_GPIO,
-	},
-	{
-		.name = "usb",
-		.rate = &commonrate,
-		.lpsc = DAVINCI_LPSC_USB,
-	},
-	{
-		.name = "AEMIFCLK",
-		.rate = &commonrate,
-		.lpsc = DAVINCI_LPSC_AEMIF,
-		.usecount = 1,
+#ifdef CONFIG_DAVINCI_RESET_CLOCKS
+/*
+ * Disable any unused clocks left on by the bootloader
+ */
+static int __init clk_disable_unused(void)
+{
+	struct clk *ck;
+
+	spin_lock_irq(&clockfw_lock);
+	list_for_each_entry(ck, &clocks, node) {
+		if (ck->usecount > 0)
+			continue;
+		if (!(ck->flags & CLK_PSC))
+			continue;
+
+		/* ignore if in Disabled or SwRstDisable states */
+		if (!davinci_psc_is_clk_active(ck->lpsc))
+			continue;
+
+		pr_info("Clocks: disable unused %s\n", ck->name);
+		davinci_psc_config(psc_domain(ck), ck->lpsc, 0);
 	}
-};
+	spin_unlock_irq(&clockfw_lock);
+
+	return 0;
+}
+late_initcall(clk_disable_unused);
+#endif
 
-int __init davinci_clk_init(void)
+static void clk_sysclk_recalc(struct clk *clk)
 {
-	struct clk *clkp;
-	int count = 0;
-	u32 pll_mult;
-
-	pll_mult = davinci_readl(DAVINCI_PLL_CNTRL0_BASE + PLLM);
-	commonrate = ((pll_mult + 1) * 27000000) / 6;
-	armrate = ((pll_mult + 1) * 27000000) / 2;
-
-	for (clkp = davinci_clks; count < ARRAY_SIZE(davinci_clks);
-	     count++, clkp++) {
-		clk_register(clkp);
-
-		/* Turn on clocks that have been enabled in the
-		 * table above */
-		if (clkp->usecount)
-			clk_enable(clkp);
+	u32 v, plldiv;
+	struct pll_data *pll;
+
+	/* If this is the PLL base clock, no more calculations needed */
+	if (clk->pll_data)
+		return;
+
+	if (WARN_ON(!clk->parent))
+		return;
+
+	clk->rate = clk->parent->rate;
+
+	/* Otherwise, the parent must be a PLL */
+	if (WARN_ON(!clk->parent->pll_data))
+		return;
+
+	pll = clk->parent->pll_data;
+
+	/* If pre-PLL, source clock is before the multiplier and divider(s) */
+	if (clk->flags & PRE_PLL)
+		clk->rate = pll->input_rate;
+
+	if (!clk->div_reg)
+		return;
+
+	v = __raw_readl(pll->base + clk->div_reg);
+	if (v & PLLDIV_EN) {
+		plldiv = (v & PLLDIV_RATIO_MASK) + 1;
+		if (plldiv)
+			clk->rate /= plldiv;
+	}
+}
+
+static void __init clk_pll_init(struct clk *clk)
+{
+	u32 ctrl, mult = 1, prediv = 1, postdiv = 1;
+	u8 bypass;
+	struct pll_data *pll = clk->pll_data;
+
+	pll->base = IO_ADDRESS(pll->phys_base);
+	ctrl = __raw_readl(pll->base + PLLCTL);
+	clk->rate = pll->input_rate = clk->parent->rate;
+
+	if (ctrl & PLLCTL_PLLEN) {
+		bypass = 0;
+		mult = __raw_readl(pll->base + PLLM);
+		mult = (mult & PLLM_PLLM_MASK) + 1;
+	} else
+		bypass = 1;
+
+	if (pll->flags & PLL_HAS_PREDIV) {
+		prediv = __raw_readl(pll->base + PREDIV);
+		if (prediv & PLLDIV_EN)
+			prediv = (prediv & PLLDIV_RATIO_MASK) + 1;
+		else
+			prediv = 1;
+	}
+
+	/* pre-divider is fixed, but (some?) chips won't report that */
+	if (cpu_is_davinci_dm355() && pll->num == 1)
+		prediv = 8;
+
+	if (pll->flags & PLL_HAS_POSTDIV) {
+		postdiv = __raw_readl(pll->base + POSTDIV);
+		if (postdiv & PLLDIV_EN)
+			postdiv = (postdiv & PLLDIV_RATIO_MASK) + 1;
+		else
+			postdiv = 1;
+	}
+
+	if (!bypass) {
+		clk->rate /= prediv;
+		clk->rate *= mult;
+		clk->rate /= postdiv;
+	}
+
+	pr_debug("PLL%d: input = %lu MHz [ ",
+		 pll->num, clk->parent->rate / 1000000);
+	if (bypass)
+		pr_debug("bypass ");
+	if (prediv > 1)
+		pr_debug("/ %d ", prediv);
+	if (mult > 1)
+		pr_debug("* %d ", mult);
+	if (postdiv > 1)
+		pr_debug("/ %d ", postdiv);
+	pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000);
+}
+
+int __init davinci_clk_init(struct davinci_clk *clocks)
+  {
+	struct davinci_clk *c;
+	struct clk *clk;
+
+	for (c = clocks; c->lk.clk; c++) {
+		clk = c->lk.clk;
+
+		if (clk->pll_data)
+			clk_pll_init(clk);
+
+		/* Calculate rates for PLL-derived clocks */
+		else if (clk->flags & CLK_PLL)
+			clk_sysclk_recalc(clk);
+
+		if (clk->lpsc)
+			clk->flags |= CLK_PSC;
+
+		clkdev_add(&c->lk);
+		clk_register(clk);
+
+		/* Turn on clocks that Linux doesn't otherwise manage */
+		if (clk->flags & ALWAYS_ENABLED)
+			clk_enable(clk);
 	}
 
 	return 0;
@@ -285,12 +316,52 @@ static void davinci_ck_stop(struct seq_file *m, void *v)
 {
 }
 
-static int davinci_ck_show(struct seq_file *m, void *v)
+#define CLKNAME_MAX	10		/* longest clock name */
+#define NEST_DELTA	2
+#define NEST_MAX	4
+
+static void
+dump_clock(struct seq_file *s, unsigned nest, struct clk *parent)
 {
-	struct clk *cp;
+	char		*state;
+	char		buf[CLKNAME_MAX + NEST_DELTA * NEST_MAX];
+	struct clk	*clk;
+	unsigned	i;
+
+	if (parent->flags & CLK_PLL)
+		state = "pll";
+	else if (parent->flags & CLK_PSC)
+		state = "psc";
+	else
+		state = "";
+
+	/* <nest spaces> name <pad to end> */
+	memset(buf, ' ', sizeof(buf) - 1);
+	buf[sizeof(buf) - 1] = 0;
+	i = strlen(parent->name);
+	memcpy(buf + nest, parent->name,
+			min(i, (unsigned)(sizeof(buf) - 1 - nest)));
+
+	seq_printf(s, "%s users=%2d %-3s %9ld Hz\n",
+		   buf, parent->usecount, state, clk_get_rate(parent));
+	/* REVISIT show device associations too */
+
+	/* cost is now small, but not linear... */
+	list_for_each_entry(clk, &clocks, node) {
+		if (clk->parent == parent)
+			dump_clock(s, nest + NEST_DELTA, clk);
+	}
+}
 
-	list_for_each_entry(cp, &clocks, node)
-		seq_printf(m,"%s %d %d\n", cp->name, *(cp->rate), cp->usecount);
+static int davinci_ck_show(struct seq_file *m, void *v)
+{
+	/* Show clock tree; we know the main oscillator is first.
+	 * We trust nonzero usecounts equate to PSC enables...
+	 */
+	mutex_lock(&clocks_mutex);
+	if (!list_empty(&clocks))
+		dump_clock(m, 0, list_first_entry(&clocks, struct clk, node));
+	mutex_unlock(&clocks_mutex);
 
 	return 0;
 }
@@ -321,4 +392,4 @@ static int __init davinci_ck_proc_init(void)
 
 }
 __initcall(davinci_ck_proc_init);
-#endif	/* CONFIG_DEBUG_PROC_FS */
+#endif /* CONFIG_DEBUG_PROC_FS */

arch/arm/mach-davinci/clock.h

@@ -1,7 +1,8 @@
 /*
  * TI DaVinci clock definitions
  *
- * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2006-2007 Texas Instruments.
+ * Copyright (C) 2008-2009 Deep Root Systems, LLC
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,23 +12,85 @@
 #ifndef __ARCH_ARM_DAVINCI_CLOCK_H
 #define __ARCH_ARM_DAVINCI_CLOCK_H
 
+#include <linux/list.h>
+#include <asm/clkdev.h>
+
+#define DAVINCI_PLL1_BASE 0x01c40800
+#define DAVINCI_PLL2_BASE 0x01c40c00
+#define MAX_PLL 2
+
+/* PLL/Reset register offsets */
+#define PLLCTL          0x100
+#define PLLCTL_PLLEN    BIT(0)
+#define PLLCTL_CLKMODE  BIT(8)
+
+#define PLLM		0x110
+#define PLLM_PLLM_MASK  0xff
+
+#define PREDIV          0x114
+#define PLLDIV1         0x118
+#define PLLDIV2         0x11c
+#define PLLDIV3         0x120
+#define POSTDIV         0x128
+#define BPDIV           0x12c
+#define PLLCMD		0x138
+#define PLLSTAT		0x13c
+#define PLLALNCTL	0x140
+#define PLLDCHANGE	0x144
+#define PLLCKEN		0x148
+#define PLLCKSTAT	0x14c
+#define PLLSYSTAT	0x150
+#define PLLDIV4         0x160
+#define PLLDIV5         0x164
+#define PLLDIV6         0x168
+#define PLLDIV7         0x16c
+#define PLLDIV8         0x170
+#define PLLDIV9         0x174
+#define PLLDIV_EN       BIT(15)
+#define PLLDIV_RATIO_MASK 0x1f
+
+struct pll_data {
+	u32 phys_base;
+	void __iomem *base;
+	u32 num;
+	u32 flags;
+	u32 input_rate;
+};
+#define PLL_HAS_PREDIV          0x01
+#define PLL_HAS_POSTDIV         0x02
+
 struct clk {
 	struct list_head	node;
 	struct module		*owner;
 	const char		*name;
-	unsigned int		*rate;
-	int			id;
-	__s8			usecount;
-	__u8			flags;
-	__u8			lpsc;
+	unsigned long		rate;
+	u8			usecount;
+	u8			flags;
+	u8			lpsc;
+	struct clk              *parent;
+	struct pll_data         *pll_data;
+	u32                     div_reg;
 };
 
 /* Clock flags */
-#define RATE_CKCTL		1
-#define RATE_FIXED		2
-#define RATE_PROPAGATES		4
-#define VIRTUAL_CLOCK		8
-#define ALWAYS_ENABLED		16
-#define ENABLE_REG_32BIT	32
+#define ALWAYS_ENABLED		BIT(1)
+#define CLK_PSC                 BIT(2)
+#define PSC_DSP                 BIT(3) /* PSC uses DSP domain, not ARM */
+#define CLK_PLL			BIT(4) /* PLL-derived clock */
+#define PRE_PLL                 BIT(5) /* source is before PLL mult/div */
+
+struct davinci_clk {
+	struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck) 		\
+	{				\
+		.lk = {			\
+			.dev_id = dev,	\
+			.con_id = con,	\
+			.clk = ck,	\
+		},			\
+	}
 
+int davinci_clk_init(struct davinci_clk *clocks);
 #endif

arch/arm/mach-davinci/devices.c

@@ -21,6 +21,10 @@
 #include <mach/hardware.h>
 #include <mach/i2c.h>
 #include <mach/irqs.h>
+#include <mach/cputype.h>
+#include <mach/mux.h>
+
+#define DAVINCI_I2C_BASE	     0x01C21000
 
 static struct resource i2c_resources[] = {
 	{
@@ -43,6 +47,9 @@ static struct platform_device davinci_i2c_device = {
 
 void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
 {
+	if (cpu_is_davinci_dm644x())
+		davinci_cfg_reg(DM644X_I2C);
+
 	davinci_i2c_device.dev.platform_data = pdata;
 	(void) platform_device_register(&davinci_i2c_device);
 }

arch/arm/mach-davinci/dm644x.c

@@ -0,0 +1,461 @@
+/*
+ * TI DaVinci DM644x chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <mach/dm644x.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/irqs.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+
+#include "clock.h"
+#include "mux.h"
+
+/*
+ * Device specific clocks
+ */
+#define DM644X_REF_FREQ		27000000
+
+static struct pll_data pll1_data = {
+	.num       = 1,
+	.phys_base = DAVINCI_PLL1_BASE,
+};
+
+static struct pll_data pll2_data = {
+	.num       = 2,
+	.phys_base = DAVINCI_PLL2_BASE,
+};
+
+static struct clk ref_clk = {
+	.name = "ref_clk",
+	.rate = DM644X_REF_FREQ,
+};
+
+static struct clk pll1_clk = {
+	.name = "pll1",
+	.parent = &ref_clk,
+	.pll_data = &pll1_data,
+	.flags = CLK_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+	.name = "pll1_sysclk1",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+	.name = "pll1_sysclk2",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+	.name = "pll1_sysclk3",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk5 = {
+	.name = "pll1_sysclk5",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV5,
+};
+
+static struct clk pll1_aux_clk = {
+	.name = "pll1_aux_clk",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclkbp = {
+	.name = "pll1_sysclkbp",
+	.parent = &pll1_clk,
+	.flags = CLK_PLL | PRE_PLL,
+	.div_reg = BPDIV
+};
+
+static struct clk pll2_clk = {
+	.name = "pll2",
+	.parent = &ref_clk,
+	.pll_data = &pll2_data,
+	.flags = CLK_PLL,
+};
+
+static struct clk pll2_sysclk1 = {
+	.name = "pll2_sysclk1",
+	.parent = &pll2_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV1,
+};
+
+static struct clk pll2_sysclk2 = {
+	.name = "pll2_sysclk2",
+	.parent = &pll2_clk,
+	.flags = CLK_PLL,
+	.div_reg = PLLDIV2,
+};
+
+static struct clk pll2_sysclkbp = {
+	.name = "pll2_sysclkbp",
+	.parent = &pll2_clk,
+	.flags = CLK_PLL | PRE_PLL,
+	.div_reg = BPDIV
+};
+
+static struct clk dsp_clk = {
+	.name = "dsp",
+	.parent = &pll1_sysclk1,
+	.lpsc = DAVINCI_LPSC_GEM,
+	.flags = PSC_DSP,
+	.usecount = 1,			/* REVISIT how to disable? */
+};
+
+static struct clk arm_clk = {
+	.name = "arm",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_ARM,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk vicp_clk = {
+	.name = "vicp",
+	.parent = &pll1_sysclk2,
+	.lpsc = DAVINCI_LPSC_IMCOP,
+	.flags = PSC_DSP,
+	.usecount = 1,			/* REVISIT how to disable? */
+};
+
+static struct clk vpss_master_clk = {
+	.name = "vpss_master",
+	.parent = &pll1_sysclk3,
+	.lpsc = DAVINCI_LPSC_VPSSMSTR,
+	.flags = CLK_PSC,
+};
+
+static struct clk vpss_slave_clk = {
+	.name = "vpss_slave",
+	.parent = &pll1_sysclk3,
+	.lpsc = DAVINCI_LPSC_VPSSSLV,
+};
+
+static struct clk uart0_clk = {
+	.name = "uart0",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+	.name = "uart1",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+	.name = "uart2",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_UART2,
+};
+
+static struct clk emac_clk = {
+	.name = "emac",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_EMAC_WRAPPER,
+};
+
+static struct clk i2c_clk = {
+	.name = "i2c",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_I2C,
+};
+
+static struct clk ide_clk = {
+	.name = "ide",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_ATA,
+};
+
+static struct clk asp_clk = {
+	.name = "asp0",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_McBSP,
+};
+
+static struct clk mmcsd_clk = {
+	.name = "mmcsd",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_MMC_SD,
+};
+
+static struct clk spi_clk = {
+	.name = "spi",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_SPI,
+};
+
+static struct clk gpio_clk = {
+	.name = "gpio",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_GPIO,
+};
+
+static struct clk usb_clk = {
+	.name = "usb",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_USB,
+};
+
+static struct clk vlynq_clk = {
+	.name = "vlynq",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_VLYNQ,
+};
+
+static struct clk aemif_clk = {
+	.name = "aemif",
+	.parent = &pll1_sysclk5,
+	.lpsc = DAVINCI_LPSC_AEMIF,
+};
+
+static struct clk pwm0_clk = {
+	.name = "pwm0",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_PWM0,
+};
+
+static struct clk pwm1_clk = {
+	.name = "pwm1",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_PWM1,
+};
+
+static struct clk pwm2_clk = {
+	.name = "pwm2",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_PWM2,
+};
+
+static struct clk timer0_clk = {
+	.name = "timer0",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+	.name = "timer1",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+	.name = "timer2",
+	.parent = &pll1_aux_clk,
+	.lpsc = DAVINCI_LPSC_TIMER2,
+	.usecount = 1,              /* REVISIT: why cant' this be disabled? */
+};
+
+struct davinci_clk dm644x_clks[] = {
+	CLK(NULL, "ref", &ref_clk),
+	CLK(NULL, "pll1", &pll1_clk),
+	CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
+	CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
+	CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
+	CLK(NULL, "pll1_sysclk5", &pll1_sysclk5),
+	CLK(NULL, "pll1_aux", &pll1_aux_clk),
+	CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
+	CLK(NULL, "pll2", &pll2_clk),
+	CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+	CLK(NULL, "pll2_sysclk2", &pll2_sysclk2),
+	CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
+	CLK(NULL, "dsp", &dsp_clk),
+	CLK(NULL, "arm", &arm_clk),
+	CLK(NULL, "vicp", &vicp_clk),
+	CLK(NULL, "vpss_master", &vpss_master_clk),
+	CLK(NULL, "vpss_slave", &vpss_slave_clk),
+	CLK(NULL, "arm", &arm_clk),
+	CLK(NULL, "uart0", &uart0_clk),
+	CLK(NULL, "uart1", &uart1_clk),
+	CLK(NULL, "uart2", &uart2_clk),
+	CLK("davinci_emac.1", NULL, &emac_clk),
+	CLK("i2c_davinci.1", NULL, &i2c_clk),
+	CLK("palm_bk3710", NULL, &ide_clk),
+	CLK("soc-audio.0", NULL, &asp_clk),
+	CLK("davinci_mmc.0", NULL, &mmcsd_clk),
+	CLK(NULL, "spi", &spi_clk),
+	CLK(NULL, "gpio", &gpio_clk),
+	CLK(NULL, "usb", &usb_clk),
+	CLK(NULL, "vlynq", &vlynq_clk),
+	CLK(NULL, "aemif", &aemif_clk),
+	CLK(NULL, "pwm0", &pwm0_clk),
+	CLK(NULL, "pwm1", &pwm1_clk),
+	CLK(NULL, "pwm2", &pwm2_clk),
+	CLK(NULL, "timer0", &timer0_clk),
+	CLK(NULL, "timer1", &timer1_clk),
+	CLK("watchdog", NULL, &timer2_clk),
+	CLK(NULL, NULL, NULL),
+};
+
+#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE)
+
+static struct resource dm644x_emac_resources[] = {
+	{
+		.start	= DM644X_EMAC_BASE,
+		.end	= DM644X_EMAC_BASE + 0x47ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_EMACINT,
+		.end   = IRQ_EMACINT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dm644x_emac_device = {
+       .name		= "davinci_emac",
+       .id		= 1,
+       .num_resources	= ARRAY_SIZE(dm644x_emac_resources),
+       .resource	= dm644x_emac_resources,
+};
+
+#endif
+
+/*
+ * Device specific mux setup
+ *
+ *	soc	description	mux  mode   mode  mux	 dbg
+ *				reg  offset mask  mode
+ */
+static const struct mux_config dm644x_pins[] = {
+MUX_CFG(DM644X, HDIREN,		0,   16,    1,	  1,	 true)
+MUX_CFG(DM644X, ATAEN,		0,   17,    1,	  1,	 true)
+MUX_CFG(DM644X, ATAEN_DISABLE,	0,   17,    1,	  0,	 true)
+
+MUX_CFG(DM644X, HPIEN_DISABLE,	0,   29,    1,	  0,	 true)
+
+MUX_CFG(DM644X, AEAW,		0,   0,     31,	  31,	 true)
+
+MUX_CFG(DM644X, MSTK,		1,   9,     1,	  0,	 false)
+
+MUX_CFG(DM644X, I2C,		1,   7,     1,	  1,	 false)
+
+MUX_CFG(DM644X, MCBSP,		1,   10,    1,	  1,	 false)
+
+MUX_CFG(DM644X, UART1,		1,   1,     1,	  1,	 true)
+MUX_CFG(DM644X, UART2,		1,   2,     1,	  1,	 true)
+
+MUX_CFG(DM644X, PWM0,		1,   4,     1,	  1,	 false)
+
+MUX_CFG(DM644X, PWM1,		1,   5,     1,	  1,	 false)
+
+MUX_CFG(DM644X, PWM2,		1,   6,     1,	  1,	 false)
+
+MUX_CFG(DM644X, VLYNQEN,	0,   15,    1,	  1,	 false)
+MUX_CFG(DM644X, VLSCREN,	0,   14,    1,	  1,	 false)
+MUX_CFG(DM644X, VLYNQWD,	0,   12,    3,	  3,	 false)
+
+MUX_CFG(DM644X, EMACEN,		0,   31,    1,	  1,	 true)
+
+MUX_CFG(DM644X, GPIO3V,		0,   31,    1,	  0,	 true)
+
+MUX_CFG(DM644X, GPIO0,		0,   24,    1,	  0,	 true)
+MUX_CFG(DM644X, GPIO3,		0,   25,    1,	  0,	 false)
+MUX_CFG(DM644X, GPIO43_44,	1,   7,     1,	  0,	 false)
+MUX_CFG(DM644X, GPIO46_47,	0,   22,    1,	  0,	 true)
+
+MUX_CFG(DM644X, RGB666,		0,   22,    1,	  1,	 true)
+
+MUX_CFG(DM644X, LOEEN,		0,   24,    1,	  1,	 true)
+MUX_CFG(DM644X, LFLDEN,		0,   25,    1,	  1,	 false)
+};
+
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm644x_no_event[] = {
+	 0,  1, 12, 13, 14,
+	15, 25, 30, 31, 45,
+	46, 47, 55, 56, 57,
+	58, 59, 60, 61, 62,
+	63,
+	-1
+};
+
+static struct edma_soc_info dm644x_edma_info = {
+	.n_channel	= 64,
+	.n_region	= 4,
+	.n_slot		= 128,
+	.n_tc		= 2,
+	.noevent	= dma_chan_dm644x_no_event,
+};
+
+static struct resource edma_resources[] = {
+	{
+		.name	= "edma_cc",
+		.start	= 0x01c00000,
+		.end	= 0x01c00000 + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc0",
+		.start	= 0x01c10000,
+		.end	= 0x01c10000 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc1",
+		.start	= 0x01c10400,
+		.end	= 0x01c10400 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_CCINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_CCERRINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	/* not using TC*_ERR */
+};
+
+static struct platform_device dm644x_edma_device = {
+	.name			= "edma",
+	.id			= -1,
+	.dev.platform_data	= &dm644x_edma_info,
+	.num_resources		= ARRAY_SIZE(edma_resources),
+	.resource		= edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+void __init dm644x_init(void)
+{
+	davinci_clk_init(dm644x_clks);
+	davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins));
+}
+
+static int __init dm644x_init_devices(void)
+{
+	if (!cpu_is_davinci_dm644x())
+		return 0;
+
+	platform_device_register(&dm644x_edma_device);
+	return 0;
+}
+postcore_initcall(dm644x_init_devices);

arch/arm/mach-davinci/dma.c

@@ -0,0 +1,1135 @@
+/*
+ * EDMA3 support for DaVinci
+ *
+ * Copyright (C) 2006-2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/compiler.h>
+#include <linux/io.h>
+
+#include <mach/cputype.h>
+#include <mach/memory.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/edma.h>
+#include <mach/mux.h>
+
+
+/* Offsets matching "struct edmacc_param" */
+#define PARM_OPT		0x00
+#define PARM_SRC		0x04
+#define PARM_A_B_CNT		0x08
+#define PARM_DST		0x0c
+#define PARM_SRC_DST_BIDX	0x10
+#define PARM_LINK_BCNTRLD	0x14
+#define PARM_SRC_DST_CIDX	0x18
+#define PARM_CCNT		0x1c
+
+#define PARM_SIZE		0x20
+
+/* Offsets for EDMA CC global channel registers and their shadows */
+#define SH_ER		0x00	/* 64 bits */
+#define SH_ECR		0x08	/* 64 bits */
+#define SH_ESR		0x10	/* 64 bits */
+#define SH_CER		0x18	/* 64 bits */
+#define SH_EER		0x20	/* 64 bits */
+#define SH_EECR		0x28	/* 64 bits */
+#define SH_EESR		0x30	/* 64 bits */
+#define SH_SER		0x38	/* 64 bits */
+#define SH_SECR		0x40	/* 64 bits */
+#define SH_IER		0x50	/* 64 bits */
+#define SH_IECR		0x58	/* 64 bits */
+#define SH_IESR		0x60	/* 64 bits */
+#define SH_IPR		0x68	/* 64 bits */
+#define SH_ICR		0x70	/* 64 bits */
+#define SH_IEVAL	0x78
+#define SH_QER		0x80
+#define SH_QEER		0x84
+#define SH_QEECR	0x88
+#define SH_QEESR	0x8c
+#define SH_QSER		0x90
+#define SH_QSECR	0x94
+#define SH_SIZE		0x200
+
+/* Offsets for EDMA CC global registers */
+#define EDMA_REV	0x0000
+#define EDMA_CCCFG	0x0004
+#define EDMA_QCHMAP	0x0200	/* 8 registers */
+#define EDMA_DMAQNUM	0x0240	/* 8 registers (4 on OMAP-L1xx) */
+#define EDMA_QDMAQNUM	0x0260
+#define EDMA_QUETCMAP	0x0280
+#define EDMA_QUEPRI	0x0284
+#define EDMA_EMR	0x0300	/* 64 bits */
+#define EDMA_EMCR	0x0308	/* 64 bits */
+#define EDMA_QEMR	0x0310
+#define EDMA_QEMCR	0x0314
+#define EDMA_CCERR	0x0318
+#define EDMA_CCERRCLR	0x031c
+#define EDMA_EEVAL	0x0320
+#define EDMA_DRAE	0x0340	/* 4 x 64 bits*/
+#define EDMA_QRAE	0x0380	/* 4 registers */
+#define EDMA_QUEEVTENTRY	0x0400	/* 2 x 16 registers */
+#define EDMA_QSTAT	0x0600	/* 2 registers */
+#define EDMA_QWMTHRA	0x0620
+#define EDMA_QWMTHRB	0x0624
+#define EDMA_CCSTAT	0x0640
+
+#define EDMA_M		0x1000	/* global channel registers */
+#define EDMA_ECR	0x1008
+#define EDMA_ECRH	0x100C
+#define EDMA_SHADOW0	0x2000	/* 4 regions shadowing global channels */
+#define EDMA_PARM	0x4000	/* 128 param entries */
+
+#define DAVINCI_DMA_3PCC_BASE	0x01C00000
+
+#define PARM_OFFSET(param_no)	(EDMA_PARM + ((param_no) << 5))
+
+#define EDMA_MAX_DMACH           64
+#define EDMA_MAX_PARAMENTRY     512
+#define EDMA_MAX_EVQUE            2	/* FIXME too small */
+
+
+/*****************************************************************************/
+
+static void __iomem *edmacc_regs_base;
+
+static inline unsigned int edma_read(int offset)
+{
+	return (unsigned int)__raw_readl(edmacc_regs_base + offset);
+}
+
+static inline void edma_write(int offset, int val)
+{
+	__raw_writel(val, edmacc_regs_base + offset);
+}
+static inline void edma_modify(int offset, unsigned and, unsigned or)
+{
+	unsigned val = edma_read(offset);
+	val &= and;
+	val |= or;
+	edma_write(offset, val);
+}
+static inline void edma_and(int offset, unsigned and)
+{
+	unsigned val = edma_read(offset);
+	val &= and;
+	edma_write(offset, val);
+}
+static inline void edma_or(int offset, unsigned or)
+{
+	unsigned val = edma_read(offset);
+	val |= or;
+	edma_write(offset, val);
+}
+static inline unsigned int edma_read_array(int offset, int i)
+{
+	return edma_read(offset + (i << 2));
+}
+static inline void edma_write_array(int offset, int i, unsigned val)
+{
+	edma_write(offset + (i << 2), val);
+}
+static inline void edma_modify_array(int offset, int i,
+		unsigned and, unsigned or)
+{
+	edma_modify(offset + (i << 2), and, or);
+}
+static inline void edma_or_array(int offset, int i, unsigned or)
+{
+	edma_or(offset + (i << 2), or);
+}
+static inline void edma_or_array2(int offset, int i, int j, unsigned or)
+{
+	edma_or(offset + ((i*2 + j) << 2), or);
+}
+static inline void edma_write_array2(int offset, int i, int j, unsigned val)
+{
+	edma_write(offset + ((i*2 + j) << 2), val);
+}
+static inline unsigned int edma_shadow0_read(int offset)
+{
+	return edma_read(EDMA_SHADOW0 + offset);
+}
+static inline unsigned int edma_shadow0_read_array(int offset, int i)
+{
+	return edma_read(EDMA_SHADOW0 + offset + (i << 2));
+}
+static inline void edma_shadow0_write(int offset, unsigned val)
+{
+	edma_write(EDMA_SHADOW0 + offset, val);
+}
+static inline void edma_shadow0_write_array(int offset, int i, unsigned val)
+{
+	edma_write(EDMA_SHADOW0 + offset + (i << 2), val);
+}
+static inline unsigned int edma_parm_read(int offset, int param_no)
+{
+	return edma_read(EDMA_PARM + offset + (param_no << 5));
+}
+static inline void edma_parm_write(int offset, int param_no, unsigned val)
+{
+	edma_write(EDMA_PARM + offset + (param_no << 5), val);
+}
+static inline void edma_parm_modify(int offset, int param_no,
+		unsigned and, unsigned or)
+{
+	edma_modify(EDMA_PARM + offset + (param_no << 5), and, or);
+}
+static inline void edma_parm_and(int offset, int param_no, unsigned and)
+{
+	edma_and(EDMA_PARM + offset + (param_no << 5), and);
+}
+static inline void edma_parm_or(int offset, int param_no, unsigned or)
+{
+	edma_or(EDMA_PARM + offset + (param_no << 5), or);
+}
+
+/*****************************************************************************/
+
+/* actual number of DMA channels and slots on this silicon */
+static unsigned num_channels;
+static unsigned num_slots;
+
+static struct dma_interrupt_data {
+	void (*callback)(unsigned channel, unsigned short ch_status,
+			 void *data);
+	void *data;
+} intr_data[EDMA_MAX_DMACH];
+
+/* The edma_inuse bit for each PaRAM slot is clear unless the
+ * channel is in use ... by ARM or DSP, for QDMA, or whatever.
+ */
+static DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY);
+
+/* The edma_noevent bit for each channel is clear unless
+ * it doesn't trigger DMA events on this platform.  It uses a
+ * bit of SOC-specific initialization code.
+ */
+static DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH);
+
+/* dummy param set used to (re)initialize parameter RAM slots */
+static const struct edmacc_param dummy_paramset = {
+	.link_bcntrld = 0xffff,
+	.ccnt = 1,
+};
+
+static const int __initconst
+queue_tc_mapping[EDMA_MAX_EVQUE + 1][2] = {
+/* {event queue no, TC no} */
+	{0, 0},
+	{1, 1},
+	{-1, -1}
+};
+
+static const int __initconst
+queue_priority_mapping[EDMA_MAX_EVQUE + 1][2] = {
+	/* {event queue no, Priority} */
+	{0, 3},
+	{1, 7},
+	{-1, -1}
+};
+
+/*****************************************************************************/
+
+static void map_dmach_queue(unsigned ch_no, enum dma_event_q queue_no)
+{
+	int bit = (ch_no & 0x7) * 4;
+
+	/* default to low priority queue */
+	if (queue_no == EVENTQ_DEFAULT)
+		queue_no = EVENTQ_1;
+
+	queue_no &= 7;
+	edma_modify_array(EDMA_DMAQNUM, (ch_no >> 3),
+			~(0x7 << bit), queue_no << bit);
+}
+
+static void __init map_queue_tc(int queue_no, int tc_no)
+{
+	int bit = queue_no * 4;
+	edma_modify(EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit));
+}
+
+static void __init assign_priority_to_queue(int queue_no, int priority)
+{
+	int bit = queue_no * 4;
+	edma_modify(EDMA_QUEPRI, ~(0x7 << bit), ((priority & 0x7) << bit));
+}
+
+static inline void
+setup_dma_interrupt(unsigned lch,
+	void (*callback)(unsigned channel, u16 ch_status, void *data),
+	void *data)
+{
+	if (!callback) {
+		edma_shadow0_write_array(SH_IECR, lch >> 5,
+				(1 << (lch & 0x1f)));
+	}
+
+	intr_data[lch].callback = callback;
+	intr_data[lch].data = data;
+
+	if (callback) {
+		edma_shadow0_write_array(SH_ICR, lch >> 5,
+				(1 << (lch & 0x1f)));
+		edma_shadow0_write_array(SH_IESR, lch >> 5,
+				(1 << (lch & 0x1f)));
+	}
+}
+
+/******************************************************************************
+ *
+ * DMA interrupt handler
+ *
+ *****************************************************************************/
+static irqreturn_t dma_irq_handler(int irq, void *data)
+{
+	int i;
+	unsigned int cnt = 0;
+
+	dev_dbg(data, "dma_irq_handler\n");
+
+	if ((edma_shadow0_read_array(SH_IPR, 0) == 0)
+	    && (edma_shadow0_read_array(SH_IPR, 1) == 0))
+		return IRQ_NONE;
+
+	while (1) {
+		int j;
+		if (edma_shadow0_read_array(SH_IPR, 0))
+			j = 0;
+		else if (edma_shadow0_read_array(SH_IPR, 1))
+			j = 1;
+		else
+			break;
+		dev_dbg(data, "IPR%d %08x\n", j,
+				edma_shadow0_read_array(SH_IPR, j));
+		for (i = 0; i < 32; i++) {
+			int k = (j << 5) + i;
+			if (edma_shadow0_read_array(SH_IPR, j) & (1 << i)) {
+				/* Clear the corresponding IPR bits */
+				edma_shadow0_write_array(SH_ICR, j, (1 << i));
+				if (intr_data[k].callback) {
+					intr_data[k].callback(k, DMA_COMPLETE,
+						intr_data[k].data);
+				}
+			}
+		}
+		cnt++;
+		if (cnt > 10)
+			break;
+	}
+	edma_shadow0_write(SH_IEVAL, 1);
+	return IRQ_HANDLED;
+}
+
+/******************************************************************************
+ *
+ * DMA error interrupt handler
+ *
+ *****************************************************************************/
+static irqreturn_t dma_ccerr_handler(int irq, void *data)
+{
+	int i;
+	unsigned int cnt = 0;
+
+	dev_dbg(data, "dma_ccerr_handler\n");
+
+	if ((edma_read_array(EDMA_EMR, 0) == 0) &&
+	    (edma_read_array(EDMA_EMR, 1) == 0) &&
+	    (edma_read(EDMA_QEMR) == 0) && (edma_read(EDMA_CCERR) == 0))
+		return IRQ_NONE;
+
+	while (1) {
+		int j = -1;
+		if (edma_read_array(EDMA_EMR, 0))
+			j = 0;
+		else if (edma_read_array(EDMA_EMR, 1))
+			j = 1;
+		if (j >= 0) {
+			dev_dbg(data, "EMR%d %08x\n", j,
+					edma_read_array(EDMA_EMR, j));
+			for (i = 0; i < 32; i++) {
+				int k = (j << 5) + i;
+				if (edma_read_array(EDMA_EMR, j) & (1 << i)) {
+					/* Clear the corresponding EMR bits */
+					edma_write_array(EDMA_EMCR, j, 1 << i);
+					/* Clear any SER */
+					edma_shadow0_write_array(SH_SECR, j,
+							(1 << i));
+					if (intr_data[k].callback) {
+						intr_data[k].callback(k,
+								DMA_CC_ERROR,
+								intr_data
+								[k].data);
+					}
+				}
+			}
+		} else if (edma_read(EDMA_QEMR)) {
+			dev_dbg(data, "QEMR %02x\n",
+				edma_read(EDMA_QEMR));
+			for (i = 0; i < 8; i++) {
+				if (edma_read(EDMA_QEMR) & (1 << i)) {
+					/* Clear the corresponding IPR bits */
+					edma_write(EDMA_QEMCR, 1 << i);
+					edma_shadow0_write(SH_QSECR, (1 << i));
+
+					/* NOTE:  not reported!! */
+				}
+			}
+		} else if (edma_read(EDMA_CCERR)) {
+			dev_dbg(data, "CCERR %08x\n",
+				edma_read(EDMA_CCERR));
+			/* FIXME:  CCERR.BIT(16) ignored!  much better
+			 * to just write CCERRCLR with CCERR value...
+			 */
+			for (i = 0; i < 8; i++) {
+				if (edma_read(EDMA_CCERR) & (1 << i)) {
+					/* Clear the corresponding IPR bits */
+					edma_write(EDMA_CCERRCLR, 1 << i);
+
+					/* NOTE:  not reported!! */
+				}
+			}
+		}
+		if ((edma_read_array(EDMA_EMR, 0) == 0)
+		    && (edma_read_array(EDMA_EMR, 1) == 0)
+		    && (edma_read(EDMA_QEMR) == 0)
+		    && (edma_read(EDMA_CCERR) == 0)) {
+			break;
+		}
+		cnt++;
+		if (cnt > 10)
+			break;
+	}
+	edma_write(EDMA_EEVAL, 1);
+	return IRQ_HANDLED;
+}
+
+/******************************************************************************
+ *
+ * Transfer controller error interrupt handlers
+ *
+ *****************************************************************************/
+
+#define tc_errs_handled	false	/* disabled as long as they're NOPs */
+
+static irqreturn_t dma_tc0err_handler(int irq, void *data)
+{
+	dev_dbg(data, "dma_tc0err_handler\n");
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t dma_tc1err_handler(int irq, void *data)
+{
+	dev_dbg(data, "dma_tc1err_handler\n");
+	return IRQ_HANDLED;
+}
+
+/*-----------------------------------------------------------------------*/
+
+/* Resource alloc/free:  dma channels, parameter RAM slots */
+
+/**
+ * edma_alloc_channel - allocate DMA channel and paired parameter RAM
+ * @channel: specific channel to allocate; negative for "any unmapped channel"
+ * @callback: optional; to be issued on DMA completion or errors
+ * @data: passed to callback
+ * @eventq_no: an EVENTQ_* constant, used to choose which Transfer
+ *	Controller (TC) executes requests using this channel.  Use
+ *	EVENTQ_DEFAULT unless you really need a high priority queue.
+ *
+ * This allocates a DMA channel and its associated parameter RAM slot.
+ * The parameter RAM is initialized to hold a dummy transfer.
+ *
+ * Normal use is to pass a specific channel number as @channel, to make
+ * use of hardware events mapped to that channel.  When the channel will
+ * be used only for software triggering or event chaining, channels not
+ * mapped to hardware events (or mapped to unused events) are preferable.
+ *
+ * DMA transfers start from a channel using edma_start(), or by
+ * chaining.  When the transfer described in that channel's parameter RAM
+ * slot completes, that slot's data may be reloaded through a link.
+ *
+ * DMA errors are only reported to the @callback associated with the
+ * channel driving that transfer, but transfer completion callbacks can
+ * be sent to another channel under control of the TCC field in
+ * the option word of the transfer's parameter RAM set.  Drivers must not
+ * use DMA transfer completion callbacks for channels they did not allocate.
+ * (The same applies to TCC codes used in transfer chaining.)
+ *
+ * Returns the number of the channel, else negative errno.
+ */
+int edma_alloc_channel(int channel,
+		void (*callback)(unsigned channel, u16 ch_status, void *data),
+		void *data,
+		enum dma_event_q eventq_no)
+{
+	if (channel < 0) {
+		channel = 0;
+		for (;;) {
+			channel = find_next_bit(edma_noevent,
+					num_channels, channel);
+			if (channel == num_channels)
+				return -ENOMEM;
+			if (!test_and_set_bit(channel, edma_inuse))
+				break;
+			channel++;
+		}
+	} else if (channel >= num_channels) {
+		return -EINVAL;
+	} else if (test_and_set_bit(channel, edma_inuse)) {
+		return -EBUSY;
+	}
+
+	/* ensure access through shadow region 0 */
+	edma_or_array2(EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f));
+
+	/* ensure no events are pending */
+	edma_stop(channel);
+	memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel),
+			&dummy_paramset, PARM_SIZE);
+
+	if (callback)
+		setup_dma_interrupt(channel, callback, data);
+
+	map_dmach_queue(channel, eventq_no);
+
+	return channel;
+}
+EXPORT_SYMBOL(edma_alloc_channel);
+
+
+/**
+ * edma_free_channel - deallocate DMA channel
+ * @channel: dma channel returned from edma_alloc_channel()
+ *
+ * This deallocates the DMA channel and associated parameter RAM slot
+ * allocated by edma_alloc_channel().
+ *
+ * Callers are responsible for ensuring the channel is inactive, and
+ * will not be reactivated by linking, chaining, or software calls to
+ * edma_start().
+ */
+void edma_free_channel(unsigned channel)
+{
+	if (channel >= num_channels)
+		return;
+
+	setup_dma_interrupt(channel, NULL, NULL);
+	/* REVISIT should probably take out of shadow region 0 */
+
+	memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel),
+			&dummy_paramset, PARM_SIZE);
+	clear_bit(channel, edma_inuse);
+}
+EXPORT_SYMBOL(edma_free_channel);
+
+/**
+ * edma_alloc_slot - allocate DMA parameter RAM
+ * @slot: specific slot to allocate; negative for "any unused slot"
+ *
+ * This allocates a parameter RAM slot, initializing it to hold a
+ * dummy transfer.  Slots allocated using this routine have not been
+ * mapped to a hardware DMA channel, and will normally be used by
+ * linking to them from a slot associated with a DMA channel.
+ *
+ * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific
+ * slots may be allocated on behalf of DSP firmware.
+ *
+ * Returns the number of the slot, else negative errno.
+ */
+int edma_alloc_slot(int slot)
+{
+	if (slot < 0) {
+		slot = num_channels;
+		for (;;) {
+			slot = find_next_zero_bit(edma_inuse,
+					num_slots, slot);
+			if (slot == num_slots)
+				return -ENOMEM;
+			if (!test_and_set_bit(slot, edma_inuse))
+				break;
+		}
+	} else if (slot < num_channels || slot >= num_slots) {
+		return -EINVAL;
+	} else if (test_and_set_bit(slot, edma_inuse)) {
+		return -EBUSY;
+	}
+
+	memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot),
+			&dummy_paramset, PARM_SIZE);
+
+	return slot;
+}
+EXPORT_SYMBOL(edma_alloc_slot);
+
+/**
+ * edma_free_slot - deallocate DMA parameter RAM
+ * @slot: parameter RAM slot returned from edma_alloc_slot()
+ *
+ * This deallocates the parameter RAM slot allocated by edma_alloc_slot().
+ * Callers are responsible for ensuring the slot is inactive, and will
+ * not be activated.
+ */
+void edma_free_slot(unsigned slot)
+{
+	if (slot < num_channels || slot >= num_slots)
+		return;
+
+	memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot),
+			&dummy_paramset, PARM_SIZE);
+	clear_bit(slot, edma_inuse);
+}
+EXPORT_SYMBOL(edma_free_slot);
+
+/*-----------------------------------------------------------------------*/
+
+/* Parameter RAM operations (i) -- read/write partial slots */
+
+/**
+ * edma_set_src - set initial DMA source address in parameter RAM slot
+ * @slot: parameter RAM slot being configured
+ * @src_port: physical address of source (memory, controller FIFO, etc)
+ * @addressMode: INCR, except in very rare cases
+ * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
+ *	width to use when addressing the fifo (e.g. W8BIT, W32BIT)
+ *
+ * Note that the source address is modified during the DMA transfer
+ * according to edma_set_src_index().
+ */
+void edma_set_src(unsigned slot, dma_addr_t src_port,
+				enum address_mode mode, enum fifo_width width)
+{
+	if (slot < num_slots) {
+		unsigned int i = edma_parm_read(PARM_OPT, slot);
+
+		if (mode) {
+			/* set SAM and program FWID */
+			i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8));
+		} else {
+			/* clear SAM */
+			i &= ~SAM;
+		}
+		edma_parm_write(PARM_OPT, slot, i);
+
+		/* set the source port address
+		   in source register of param structure */
+		edma_parm_write(PARM_SRC, slot, src_port);
+	}
+}
+EXPORT_SYMBOL(edma_set_src);
+
+/**
+ * edma_set_dest - set initial DMA destination address in parameter RAM slot
+ * @slot: parameter RAM slot being configured
+ * @dest_port: physical address of destination (memory, controller FIFO, etc)
+ * @addressMode: INCR, except in very rare cases
+ * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
+ *	width to use when addressing the fifo (e.g. W8BIT, W32BIT)
+ *
+ * Note that the destination address is modified during the DMA transfer
+ * according to edma_set_dest_index().
+ */
+void edma_set_dest(unsigned slot, dma_addr_t dest_port,
+				 enum address_mode mode, enum fifo_width width)
+{
+	if (slot < num_slots) {
+		unsigned int i = edma_parm_read(PARM_OPT, slot);
+
+		if (mode) {
+			/* set DAM and program FWID */
+			i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8));
+		} else {
+			/* clear DAM */
+			i &= ~DAM;
+		}
+		edma_parm_write(PARM_OPT, slot, i);
+		/* set the destination port address
+		   in dest register of param structure */
+		edma_parm_write(PARM_DST, slot, dest_port);
+	}
+}
+EXPORT_SYMBOL(edma_set_dest);
+
+/**
+ * edma_get_position - returns the current transfer points
+ * @slot: parameter RAM slot being examined
+ * @src: pointer to source port position
+ * @dst: pointer to destination port position
+ *
+ * Returns current source and destination addresses for a particular
+ * parameter RAM slot.  Its channel should not be active when this is called.
+ */
+void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst)
+{
+	struct edmacc_param temp;
+
+	edma_read_slot(slot, &temp);
+	if (src != NULL)
+		*src = temp.src;
+	if (dst != NULL)
+		*dst = temp.dst;
+}
+EXPORT_SYMBOL(edma_get_position);
+
+/**
+ * edma_set_src_index - configure DMA source address indexing
+ * @slot: parameter RAM slot being configured
+ * @src_bidx: byte offset between source arrays in a frame
+ * @src_cidx: byte offset between source frames in a block
+ *
+ * Offsets are specified to support either contiguous or discontiguous
+ * memory transfers, or repeated access to a hardware register, as needed.
+ * When accessing hardware registers, both offsets are normally zero.
+ */
+void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx)
+{
+	if (slot < num_slots) {
+		edma_parm_modify(PARM_SRC_DST_BIDX, slot,
+				0xffff0000, src_bidx);
+		edma_parm_modify(PARM_SRC_DST_CIDX, slot,
+				0xffff0000, src_cidx);
+	}
+}
+EXPORT_SYMBOL(edma_set_src_index);
+
+/**
+ * edma_set_dest_index - configure DMA destination address indexing
+ * @slot: parameter RAM slot being configured
+ * @dest_bidx: byte offset between destination arrays in a frame
+ * @dest_cidx: byte offset between destination frames in a block
+ *
+ * Offsets are specified to support either contiguous or discontiguous
+ * memory transfers, or repeated access to a hardware register, as needed.
+ * When accessing hardware registers, both offsets are normally zero.
+ */
+void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx)
+{
+	if (slot < num_slots) {
+		edma_parm_modify(PARM_SRC_DST_BIDX, slot,
+				0x0000ffff, dest_bidx << 16);
+		edma_parm_modify(PARM_SRC_DST_CIDX, slot,
+				0x0000ffff, dest_cidx << 16);
+	}
+}
+EXPORT_SYMBOL(edma_set_dest_index);
+
+/**
+ * edma_set_transfer_params - configure DMA transfer parameters
+ * @slot: parameter RAM slot being configured
+ * @acnt: how many bytes per array (at least one)
+ * @bcnt: how many arrays per frame (at least one)
+ * @ccnt: how many frames per block (at least one)
+ * @bcnt_rld: used only for A-Synchronized transfers; this specifies
+ *	the value to reload into bcnt when it decrements to zero
+ * @sync_mode: ASYNC or ABSYNC
+ *
+ * See the EDMA3 documentation to understand how to configure and link
+ * transfers using the fields in PaRAM slots.  If you are not doing it
+ * all at once with edma_write_slot(), you will use this routine
+ * plus two calls each for source and destination, setting the initial
+ * address and saying how to index that address.
+ *
+ * An example of an A-Synchronized transfer is a serial link using a
+ * single word shift register.  In that case, @acnt would be equal to
+ * that word size; the serial controller issues a DMA synchronization
+ * event to transfer each word, and memory access by the DMA transfer
+ * controller will be word-at-a-time.
+ *
+ * An example of an AB-Synchronized transfer is a device using a FIFO.
+ * In that case, @acnt equals the FIFO width and @bcnt equals its depth.
+ * The controller with the FIFO issues DMA synchronization events when
+ * the FIFO threshold is reached, and the DMA transfer controller will
+ * transfer one frame to (or from) the FIFO.  It will probably use
+ * efficient burst modes to access memory.
+ */
+void edma_set_transfer_params(unsigned slot,
+		u16 acnt, u16 bcnt, u16 ccnt,
+		u16 bcnt_rld, enum sync_dimension sync_mode)
+{
+	if (slot < num_slots) {
+		edma_parm_modify(PARM_LINK_BCNTRLD, slot,
+				0x0000ffff, bcnt_rld << 16);
+		if (sync_mode == ASYNC)
+			edma_parm_and(PARM_OPT, slot, ~SYNCDIM);
+		else
+			edma_parm_or(PARM_OPT, slot, SYNCDIM);
+		/* Set the acount, bcount, ccount registers */
+		edma_parm_write(PARM_A_B_CNT, slot, (bcnt << 16) | acnt);
+		edma_parm_write(PARM_CCNT, slot, ccnt);
+	}
+}
+EXPORT_SYMBOL(edma_set_transfer_params);
+
+/**
+ * edma_link - link one parameter RAM slot to another
+ * @from: parameter RAM slot originating the link
+ * @to: parameter RAM slot which is the link target
+ *
+ * The originating slot should not be part of any active DMA transfer.
+ */
+void edma_link(unsigned from, unsigned to)
+{
+	if (from >= num_slots)
+		return;
+	if (to >= num_slots)
+		return;
+	edma_parm_modify(PARM_LINK_BCNTRLD, from, 0xffff0000, PARM_OFFSET(to));
+}
+EXPORT_SYMBOL(edma_link);
+
+/**
+ * edma_unlink - cut link from one parameter RAM slot
+ * @from: parameter RAM slot originating the link
+ *
+ * The originating slot should not be part of any active DMA transfer.
+ * Its link is set to 0xffff.
+ */
+void edma_unlink(unsigned from)
+{
+	if (from >= num_slots)
+		return;
+	edma_parm_or(PARM_LINK_BCNTRLD, from, 0xffff);
+}
+EXPORT_SYMBOL(edma_unlink);
+
+/*-----------------------------------------------------------------------*/
+
+/* Parameter RAM operations (ii) -- read/write whole parameter sets */
+
+/**
+ * edma_write_slot - write parameter RAM data for slot
+ * @slot: number of parameter RAM slot being modified
+ * @param: data to be written into parameter RAM slot
+ *
+ * Use this to assign all parameters of a transfer at once.  This
+ * allows more efficient setup of transfers than issuing multiple
+ * calls to set up those parameters in small pieces, and provides
+ * complete control over all transfer options.
+ */
+void edma_write_slot(unsigned slot, const struct edmacc_param *param)
+{
+	if (slot >= num_slots)
+		return;
+	memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), param, PARM_SIZE);
+}
+EXPORT_SYMBOL(edma_write_slot);
+
+/**
+ * edma_read_slot - read parameter RAM data from slot
+ * @slot: number of parameter RAM slot being copied
+ * @param: where to store copy of parameter RAM data
+ *
+ * Use this to read data from a parameter RAM slot, perhaps to
+ * save them as a template for later reuse.
+ */
+void edma_read_slot(unsigned slot, struct edmacc_param *param)
+{
+	if (slot >= num_slots)
+		return;
+	memcpy_fromio(param, edmacc_regs_base + PARM_OFFSET(slot), PARM_SIZE);
+}
+EXPORT_SYMBOL(edma_read_slot);
+
+/*-----------------------------------------------------------------------*/
+
+/* Various EDMA channel control operations */
+
+/**
+ * edma_pause - pause dma on a channel
+ * @channel: on which edma_start() has been called
+ *
+ * This temporarily disables EDMA hardware events on the specified channel,
+ * preventing them from triggering new transfers on its behalf
+ */
+void edma_pause(unsigned channel)
+{
+	if (channel < num_channels) {
+		unsigned int mask = (1 << (channel & 0x1f));
+
+		edma_shadow0_write_array(SH_EECR, channel >> 5, mask);
+	}
+}
+EXPORT_SYMBOL(edma_pause);
+
+/**
+ * edma_resume - resumes dma on a paused channel
+ * @channel: on which edma_pause() has been called
+ *
+ * This re-enables EDMA hardware events on the specified channel.
+ */
+void edma_resume(unsigned channel)
+{
+	if (channel < num_channels) {
+		unsigned int mask = (1 << (channel & 0x1f));
+
+		edma_shadow0_write_array(SH_EESR, channel >> 5, mask);
+	}
+}
+EXPORT_SYMBOL(edma_resume);
+
+/**
+ * edma_start - start dma on a channel
+ * @channel: channel being activated
+ *
+ * Channels with event associations will be triggered by their hardware
+ * events, and channels without such associations will be triggered by
+ * software.  (At this writing there is no interface for using software
+ * triggers except with channels that don't support hardware triggers.)
+ *
+ * Returns zero on success, else negative errno.
+ */
+int edma_start(unsigned channel)
+{
+	if (channel < num_channels) {
+		int j = channel >> 5;
+		unsigned int mask = (1 << (channel & 0x1f));
+
+		/* EDMA channels without event association */
+		if (test_bit(channel, edma_noevent)) {
+			pr_debug("EDMA: ESR%d %08x\n", j,
+				edma_shadow0_read_array(SH_ESR, j));
+			edma_shadow0_write_array(SH_ESR, j, mask);
+			return 0;
+		}
+
+		/* EDMA channel with event association */
+		pr_debug("EDMA: ER%d %08x\n", j,
+			edma_shadow0_read_array(SH_ER, j));
+		/* Clear any pending error */
+		edma_write_array(EDMA_EMCR, j, mask);
+		/* Clear any SER */
+		edma_shadow0_write_array(SH_SECR, j, mask);
+		edma_shadow0_write_array(SH_EESR, j, mask);
+		pr_debug("EDMA: EER%d %08x\n", j,
+			edma_shadow0_read_array(SH_EER, j));
+		return 0;
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(edma_start);
+
+/**
+ * edma_stop - stops dma on the channel passed
+ * @channel: channel being deactivated
+ *
+ * When @lch is a channel, any active transfer is paused and
+ * all pending hardware events are cleared.  The current transfer
+ * may not be resumed, and the channel's Parameter RAM should be
+ * reinitialized before being reused.
+ */
+void edma_stop(unsigned channel)
+{
+	if (channel < num_channels) {
+		int j = channel >> 5;
+		unsigned int mask = (1 << (channel & 0x1f));
+
+		edma_shadow0_write_array(SH_EECR, j, mask);
+		edma_shadow0_write_array(SH_ECR, j, mask);
+		edma_shadow0_write_array(SH_SECR, j, mask);
+		edma_write_array(EDMA_EMCR, j, mask);
+
+		pr_debug("EDMA: EER%d %08x\n", j,
+				edma_shadow0_read_array(SH_EER, j));
+
+		/* REVISIT:  consider guarding against inappropriate event
+		 * chaining by overwriting with dummy_paramset.
+		 */
+	}
+}
+EXPORT_SYMBOL(edma_stop);
+
+/******************************************************************************
+ *
+ * It cleans ParamEntry qand bring back EDMA to initial state if media has
+ * been removed before EDMA has finished.It is usedful for removable media.
+ * Arguments:
+ *      ch_no     - channel no
+ *
+ * Return: zero on success, or corresponding error no on failure
+ *
+ * FIXME this should not be needed ... edma_stop() should suffice.
+ *
+ *****************************************************************************/
+
+void edma_clean_channel(unsigned channel)
+{
+	if (channel < num_channels) {
+		int j = (channel >> 5);
+		unsigned int mask = 1 << (channel & 0x1f);
+
+		pr_debug("EDMA: EMR%d %08x\n", j,
+				edma_read_array(EDMA_EMR, j));
+		edma_shadow0_write_array(SH_ECR, j, mask);
+		/* Clear the corresponding EMR bits */
+		edma_write_array(EDMA_EMCR, j, mask);
+		/* Clear any SER */
+		edma_shadow0_write_array(SH_SECR, j, mask);
+		edma_write(EDMA_CCERRCLR, (1 << 16) | 0x3);
+	}
+}
+EXPORT_SYMBOL(edma_clean_channel);
+
+/*
+ * edma_clear_event - clear an outstanding event on the DMA channel
+ * Arguments:
+ *	channel - channel number
+ */
+void edma_clear_event(unsigned channel)
+{
+	if (channel >= num_channels)
+		return;
+	if (channel < 32)
+		edma_write(EDMA_ECR, 1 << channel);
+	else
+		edma_write(EDMA_ECRH, 1 << (channel - 32));
+}
+EXPORT_SYMBOL(edma_clear_event);
+
+/*-----------------------------------------------------------------------*/
+
+static int __init edma_probe(struct platform_device *pdev)
+{
+	struct edma_soc_info	*info = pdev->dev.platform_data;
+	int			i;
+	int			status;
+	const s8		*noevent;
+	int			irq = 0, err_irq = 0;
+	struct resource		*r;
+	resource_size_t		len;
+
+	if (!info)
+		return -ENODEV;
+
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "edma_cc");
+	if (!r)
+		return -ENODEV;
+
+	len = r->end - r->start + 1;
+
+	r = request_mem_region(r->start, len, r->name);
+	if (!r)
+		return -EBUSY;
+
+	edmacc_regs_base = ioremap(r->start, len);
+	if (!edmacc_regs_base) {
+		status = -EBUSY;
+		goto fail1;
+	}
+
+	num_channels = min_t(unsigned, info->n_channel, EDMA_MAX_DMACH);
+	num_slots = min_t(unsigned, info->n_slot, EDMA_MAX_PARAMENTRY);
+
+	dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", edmacc_regs_base);
+
+	for (i = 0; i < num_slots; i++)
+		memcpy_toio(edmacc_regs_base + PARM_OFFSET(i),
+				&dummy_paramset, PARM_SIZE);
+
+	noevent = info->noevent;
+	if (noevent) {
+		while (*noevent != -1)
+			set_bit(*noevent++, edma_noevent);
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	status = request_irq(irq, dma_irq_handler, 0, "edma", &pdev->dev);
+	if (status < 0) {
+		dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+			irq, status);
+		goto fail;
+	}
+
+	err_irq = platform_get_irq(pdev, 1);
+	status = request_irq(err_irq, dma_ccerr_handler, 0,
+				"edma_error", &pdev->dev);
+	if (status < 0) {
+		dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+			err_irq, status);
+		goto fail;
+	}
+
+	if (tc_errs_handled) {
+		status = request_irq(IRQ_TCERRINT0, dma_tc0err_handler, 0,
+					"edma_tc0", &pdev->dev);
+		if (status < 0) {
+			dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+				IRQ_TCERRINT0, status);
+			return status;
+		}
+		status = request_irq(IRQ_TCERRINT, dma_tc1err_handler, 0,
+					"edma_tc1", &pdev->dev);
+		if (status < 0) {
+			dev_dbg(&pdev->dev, "request_irq %d --> %d\n",
+				IRQ_TCERRINT, status);
+			return status;
+		}
+	}
+
+	/* Everything lives on transfer controller 1 until otherwise specified.
+	 * This way, long transfers on the low priority queue
+	 * started by the codec engine will not cause audio defects.
+	 */
+	for (i = 0; i < num_channels; i++)
+		map_dmach_queue(i, EVENTQ_1);
+
+	/* Event queue to TC mapping */
+	for (i = 0; queue_tc_mapping[i][0] != -1; i++)
+		map_queue_tc(queue_tc_mapping[i][0], queue_tc_mapping[i][1]);
+
+	/* Event queue priority mapping */
+	for (i = 0; queue_priority_mapping[i][0] != -1; i++)
+		assign_priority_to_queue(queue_priority_mapping[i][0],
+					 queue_priority_mapping[i][1]);
+
+	for (i = 0; i < info->n_region; i++) {
+		edma_write_array2(EDMA_DRAE, i, 0, 0x0);
+		edma_write_array2(EDMA_DRAE, i, 1, 0x0);
+		edma_write_array(EDMA_QRAE, i, 0x0);
+	}
+
+	return 0;
+
+fail:
+	if (err_irq)
+		free_irq(err_irq, NULL);
+	if (irq)
+		free_irq(irq, NULL);
+	iounmap(edmacc_regs_base);
+fail1:
+	release_mem_region(r->start, len);
+	return status;
+}
+
+
+static struct platform_driver edma_driver = {
+	.driver.name	= "edma",
+};
+
+static int __init edma_init(void)
+{
+	return platform_driver_probe(&edma_driver, edma_probe);
+}
+arch_initcall(edma_init);
+

arch/arm/mach-davinci/gpio.c

@@ -20,6 +20,7 @@
 #include <linux/irq.h>
 #include <linux/bitops.h>
 
+#include <mach/cputype.h>
 #include <mach/irqs.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
@@ -36,9 +37,10 @@ struct davinci_gpio {
 
 static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
 
+static unsigned __initdata ngpio;
 
 /* create a non-inlined version */
-static struct gpio_controller *__iomem __init gpio2controller(unsigned gpio)
+static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio)
 {
 	return __gpio_to_controller(gpio);
 }
@@ -114,9 +116,30 @@ static int __init davinci_gpio_setup(void)
 {
 	int i, base;
 
-	for (i = 0, base = 0;
-			i < ARRAY_SIZE(chips);
-			i++, base += 32) {
+	/* The gpio banks conceptually expose a segmented bitmap,
+	 * and "ngpio" is one more than the largest zero-based
+	 * bit index that's valid.
+	 */
+	if (cpu_is_davinci_dm355()) {		/* or dm335() */
+		ngpio = 104;
+	} else if (cpu_is_davinci_dm644x()) {	/* or dm337() */
+		ngpio = 71;
+	} else if (cpu_is_davinci_dm646x()) {
+		/* NOTE:  each bank has several "reserved" bits,
+		 * unusable as GPIOs.  Only 33 of the GPIO numbers
+		 * are usable, and we're not rejecting the others.
+		 */
+		ngpio = 43;
+	} else {
+		/* if cpu_is_davinci_dm643x() ngpio = 111 */
+		pr_err("GPIO setup:  how many GPIOs?\n");
+		return -EINVAL;
+	}
+
+	if (WARN_ON(DAVINCI_N_GPIO < ngpio))
+		ngpio = DAVINCI_N_GPIO;
+
+	for (i = 0, base = 0; base < ngpio; i++, base += 32) {
 		chips[i].chip.label = "DaVinci";
 
 		chips[i].chip.direction_input = davinci_direction_in;
@@ -125,7 +148,7 @@ static int __init davinci_gpio_setup(void)
 		chips[i].chip.set = davinci_gpio_set;
 
 		chips[i].chip.base = base;
-		chips[i].chip.ngpio = DAVINCI_N_GPIO - base;
+		chips[i].chip.ngpio = ngpio - base;
 		if (chips[i].chip.ngpio > 32)
 			chips[i].chip.ngpio = 32;
 
@@ -143,11 +166,11 @@ pure_initcall(davinci_gpio_setup);
  * We expect irqs will normally be set up as input pins, but they can also be
  * used as output pins ... which is convenient for testing.
  *
- * NOTE:  GPIO0..GPIO7 also have direct INTC hookups, which work in addition
- * to their GPIOBNK0 irq (but with a bit less overhead).  But we don't have
- * a good way to hook those up ...
+ * NOTE:  The first few GPIOs also have direct INTC hookups in addition
+ * to their GPIOBNK0 irq, with a bit less overhead but less flexibility
+ * on triggering (e.g. no edge options).  We don't try to use those.
  *
- * All those INTC hookups (GPIO0..GPIO7 plus five IRQ banks) can also
+ * All those INTC hookups (direct, plus several IRQ banks) can also
  * serve as EDMA event triggers.
  */
 
@@ -235,29 +258,42 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 }
 
 /*
- * NOTE:  for suspend/resume, probably best to make a sysdev (and class)
- * with its suspend/resume calls hooking into the results of the set_wake()
+ * NOTE:  for suspend/resume, probably best to make a platform_device with
+ * suspend_late/resume_resume calls hooking into results of the set_wake()
  * calls ... so if no gpios are wakeup events the clock can be disabled,
  * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0
- * can be set appropriately for GPIOV33 pins.
+ * (dm6446) can be set appropriately for GPIOV33 pins.
  */
 
 static int __init davinci_gpio_irq_setup(void)
 {
 	unsigned	gpio, irq, bank;
+	unsigned	bank_irq;
 	struct clk	*clk;
+	u32		binten = 0;
+
+	if (cpu_is_davinci_dm355()) {		/* or dm335() */
+		bank_irq = IRQ_DM355_GPIOBNK0;
+	} else if (cpu_is_davinci_dm644x()) {
+		bank_irq = IRQ_GPIOBNK0;
+	} else if (cpu_is_davinci_dm646x()) {
+		bank_irq = IRQ_DM646X_GPIOBNK0;
+	} else {
+		printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
+		return -EINVAL;
+	}
 
 	clk = clk_get(NULL, "gpio");
 	if (IS_ERR(clk)) {
 		printk(KERN_ERR "Error %ld getting gpio clock?\n",
 		       PTR_ERR(clk));
-		return 0;
+		return PTR_ERR(clk);
 	}
-
 	clk_enable(clk);
 
-	for (gpio = 0, irq = gpio_to_irq(0), bank = IRQ_GPIOBNK0;
-	     gpio < DAVINCI_N_GPIO; bank++) {
+	for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
+			gpio < ngpio;
+			bank++, bank_irq++) {
 		struct gpio_controller	*__iomem g = gpio2controller(gpio);
 		unsigned		i;
 
@@ -265,28 +301,28 @@ static int __init davinci_gpio_irq_setup(void)
 		__raw_writel(~0, &g->clr_rising);
 
 		/* set up all irqs in this bank */
-		set_irq_chained_handler(bank, gpio_irq_handler);
-		set_irq_chip_data(bank, g);
-		set_irq_data(bank, (void *)irq);
+		set_irq_chained_handler(bank_irq, gpio_irq_handler);
+		set_irq_chip_data(bank_irq, g);
+		set_irq_data(bank_irq, (void *)irq);
 
-		for (i = 0; i < 16 && gpio < DAVINCI_N_GPIO;
-		     i++, irq++, gpio++) {
+		for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
 			set_irq_chip(irq, &gpio_irqchip);
 			set_irq_chip_data(irq, g);
 			set_irq_handler(irq, handle_simple_irq);
 			set_irq_flags(irq, IRQF_VALID);
 		}
+
+		binten |= BIT(bank);
 	}
 
 	/* BINTEN -- per-bank interrupt enable. genirq would also let these
 	 * bits be set/cleared dynamically.
 	 */
-	__raw_writel(0x1f, (void *__iomem)
+	__raw_writel(binten, (void *__iomem)
 		     IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08));
 
 	printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
 
 	return 0;
 }
-
 arch_initcall(davinci_gpio_irq_setup);

arch/arm/mach-davinci/id.c

@@ -15,7 +15,9 @@
 #include <linux/init.h>
 #include <linux/io.h>
 
-#define JTAG_ID_BASE		0x01c40028
+#define JTAG_ID_BASE		IO_ADDRESS(0x01c40028)
+
+static unsigned int davinci_revision;
 
 struct davinci_id {
 	u8	variant;	/* JTAG ID bits 31:28 */
@@ -33,6 +35,20 @@ static struct davinci_id davinci_ids[] __initdata = {
 		.manufacturer = 0x017,
 		.type	      = 0x64460000,
 	},
+	{
+		/* DM646X */
+		.part_no      = 0xb770,
+		.variant      = 0x0,
+		.manufacturer = 0x017,
+		.type         = 0x64670000,
+	},
+	{
+		/* DM355 */
+		.part_no	= 0xb73b,
+		.variant	= 0x0,
+		.manufacturer	= 0x00f,
+		.type		= 0x03550000,
+	},
 };
 
 /*
@@ -42,7 +58,7 @@ static u16 __init davinci_get_part_no(void)
 {
 	u32 dev_id, part_no;
 
-	dev_id = davinci_readl(JTAG_ID_BASE);
+	dev_id = __raw_readl(JTAG_ID_BASE);
 
 	part_no = ((dev_id >> 12) & 0xffff);
 
@@ -56,13 +72,19 @@ static u8 __init davinci_get_variant(void)
 {
 	u32 variant;
 
-	variant = davinci_readl(JTAG_ID_BASE);
+	variant = __raw_readl(JTAG_ID_BASE);
 
 	variant = (variant >> 28) & 0xf;
 
 	return variant;
 }
 
+unsigned int davinci_rev(void)
+{
+	return davinci_revision >> 16;
+}
+EXPORT_SYMBOL(davinci_rev);
+
 void __init davinci_check_revision(void)
 {
 	int i;
@@ -75,7 +97,7 @@ void __init davinci_check_revision(void)
 	/* First check only the major version in a safe way */
 	for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
 		if (part_no == (davinci_ids[i].part_no)) {
-			system_rev = davinci_ids[i].type;
+			davinci_revision = davinci_ids[i].type;
 			break;
 		}
 	}
@@ -84,10 +106,11 @@ void __init davinci_check_revision(void)
 	for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
 		if (part_no == davinci_ids[i].part_no &&
 		    variant == davinci_ids[i].variant) {
-			system_rev = davinci_ids[i].type;
+			davinci_revision = davinci_ids[i].type;
 			break;
 		}
 	}
 
-	printk("DaVinci DM%04x variant 0x%x\n", system_rev >> 16, variant);
+	printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n",
+	       davinci_rev(), variant);
 }

arch/arm/mach-davinci/include/mach/board-dm6446evm.h

@@ -0,0 +1,20 @@
+/*
+ * DaVinci DM6446 EVM board specific headers
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or ifndef.
+ */
+
+#ifndef _MACH_DAVINCI_DM6446EVM_H
+#define _MACH_DAVINCI_DM6446EVM_H
+
+#include <linux/types.h>
+
+int dm6446evm_eeprom_read(char *buf, off_t off, size_t count);
+int dm6446evm_eeprom_write(char *buf, off_t off, size_t count);
+
+#endif

arch/arm/mach-davinci/include/mach/clkdev.h

@@ -0,0 +1,13 @@
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+static inline int __clk_get(struct clk *clk)
+{
+	return 1;
+}
+
+static inline void __clk_put(struct clk *clk)
+{
+}
+
+#endif

arch/arm/mach-davinci/include/mach/clock.h

@@ -17,6 +17,5 @@ struct clk;
 
 extern int clk_register(struct clk *clk);
 extern void clk_unregister(struct clk *clk);
-extern int davinci_clk_init(void);
 
 #endif

arch/arm/mach-davinci/include/mach/common.h

@@ -16,6 +16,12 @@ struct sys_timer;
 
 extern struct sys_timer davinci_timer;
 
+extern void davinci_irq_init(void);
+extern void davinci_map_common_io(void);
+
+/* parameters describe VBUS sourcing for host mode */
+extern void setup_usb(unsigned mA, unsigned potpgt_msec);
+
 /* parameters describe VBUS sourcing for host mode */
 extern void setup_usb(unsigned mA, unsigned potpgt_msec);
 

arch/arm/mach-davinci/include/mach/cputype.h

@@ -0,0 +1,49 @@
+/*
+ * DaVinci CPU type detection
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * Defines the cpu_is_*() macros for runtime detection of DaVinci
+ * device type.  In addtion, if support for a given device is not
+ * compiled in to the kernel, the macros return 0 so that
+ * resulting code can be optimized out.
+ *
+ * 2009 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef _ASM_ARCH_CPU_H
+#define _ASM_ARCH_CPU_H
+
+extern unsigned int davinci_rev(void);
+
+#define IS_DAVINCI_CPU(type, id)			\
+static inline int is_davinci_dm ##type(void)	        \
+{							\
+	return (davinci_rev() == (id)) ? 1 : 0;	        \
+}
+
+IS_DAVINCI_CPU(644x, 0x6446)
+IS_DAVINCI_CPU(646x, 0x6467)
+IS_DAVINCI_CPU(355, 0x355)
+
+#ifdef CONFIG_ARCH_DAVINCI_DM644x
+#define cpu_is_davinci_dm644x() is_davinci_dm644x()
+#else
+#define cpu_is_davinci_dm644x() 0
+#endif
+
+#ifdef CONFIG_ARCH_DAVINCI_DM646x
+#define cpu_is_davinci_dm646x() is_davinci_dm646x()
+#else
+#define cpu_is_davinci_dm646x() 0
+#endif
+
+#ifdef CONFIG_ARCH_DAVINCI_DM355
+#define cpu_is_davinci_dm355() is_davinci_dm355()
+#else
+#define cpu_is_davinci_dm355() 0
+#endif
+
+#endif

arch/arm/mach-davinci/include/mach/dm644x.h

@@ -0,0 +1,37 @@
+/*
+ * This file contains the processor specific definitions
+ * of the TI DM644x.
+ *
+ * Copyright (C) 2008 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#ifndef __ASM_ARCH_DM644X_H
+#define __ASM_ARCH_DM644X_H
+
+#include <linux/platform_device.h>
+#include <mach/hardware.h>
+
+#define DM644X_EMAC_BASE		(0x01C80000)
+#define DM644X_EMAC_CNTRL_OFFSET	(0x0000)
+#define DM644X_EMAC_CNTRL_MOD_OFFSET	(0x1000)
+#define DM644X_EMAC_CNTRL_RAM_OFFSET	(0x2000)
+#define DM644X_EMAC_MDIO_OFFSET		(0x4000)
+#define DM644X_EMAC_CNTRL_RAM_SIZE	(0x2000)
+
+void __init dm644x_init(void);
+
+#endif /* __ASM_ARCH_DM644X_H */

arch/arm/mach-davinci/include/mach/edma.h

@@ -0,0 +1,228 @@
+/*
+ *  TI DAVINCI dma definitions
+ *
+ *  Copyright (C) 2006-2009 Texas Instruments.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/*
+ * This EDMA3 programming framework exposes two basic kinds of resource:
+ *
+ *  Channel	Triggers transfers, usually from a hardware event but
+ *		also manually or by "chaining" from DMA completions.
+ *		Each channel is coupled to a Parameter RAM (PaRAM) slot.
+ *
+ *  Slot	Each PaRAM slot holds a DMA transfer descriptor (PaRAM
+ *		"set"), source and destination addresses, a link to a
+ *		next PaRAM slot (if any), options for the transfer, and
+ *		instructions for updating those addresses.  There are
+ *		more than twice as many slots as event channels.
+ *
+ * Each PaRAM set describes a sequence of transfers, either for one large
+ * buffer or for several discontiguous smaller buffers.  An EDMA transfer
+ * is driven only from a channel, which performs the transfers specified
+ * in its PaRAM slot until there are no more transfers.  When that last
+ * transfer completes, the "link" field may be used to reload the channel's
+ * PaRAM slot with a new transfer descriptor.
+ *
+ * The EDMA Channel Controller (CC) maps requests from channels into physical
+ * Transfer Controller (TC) requests when the channel triggers (by hardware
+ * or software events, or by chaining).  The two physical DMA channels provided
+ * by the TCs are thus shared by many logical channels.
+ *
+ * DaVinci hardware also has a "QDMA" mechanism which is not currently
+ * supported through this interface.  (DSP firmware uses it though.)
+ */
+
+#ifndef EDMA_H_
+#define EDMA_H_
+
+/* PaRAM slots are laid out like this */
+struct edmacc_param {
+	unsigned int opt;
+	unsigned int src;
+	unsigned int a_b_cnt;
+	unsigned int dst;
+	unsigned int src_dst_bidx;
+	unsigned int link_bcntrld;
+	unsigned int src_dst_cidx;
+	unsigned int ccnt;
+};
+
+#define CCINT0_INTERRUPT     16
+#define CCERRINT_INTERRUPT   17
+#define TCERRINT0_INTERRUPT   18
+#define TCERRINT1_INTERRUPT   19
+
+/* fields in edmacc_param.opt */
+#define SAM		BIT(0)
+#define DAM		BIT(1)
+#define SYNCDIM		BIT(2)
+#define STATIC		BIT(3)
+#define EDMA_FWID	(0x07 << 8)
+#define TCCMODE		BIT(11)
+#define EDMA_TCC(t)	((t) << 12)
+#define TCINTEN		BIT(20)
+#define ITCINTEN	BIT(21)
+#define TCCHEN		BIT(22)
+#define ITCCHEN		BIT(23)
+
+#define TRWORD (0x7<<2)
+#define PAENTRY (0x1ff<<5)
+
+/* Drivers should avoid using these symbolic names for dm644x
+ * channels, and use platform_device IORESOURCE_DMA resources
+ * instead.  (Other DaVinci chips have different peripherals
+ * and thus have different DMA channel mappings.)
+ */
+#define DAVINCI_DMA_MCBSP_TX              2
+#define DAVINCI_DMA_MCBSP_RX              3
+#define DAVINCI_DMA_VPSS_HIST             4
+#define DAVINCI_DMA_VPSS_H3A              5
+#define DAVINCI_DMA_VPSS_PRVU             6
+#define DAVINCI_DMA_VPSS_RSZ              7
+#define DAVINCI_DMA_IMCOP_IMXINT          8
+#define DAVINCI_DMA_IMCOP_VLCDINT         9
+#define DAVINCI_DMA_IMCO_PASQINT         10
+#define DAVINCI_DMA_IMCOP_DSQINT         11
+#define DAVINCI_DMA_SPI_SPIX             16
+#define DAVINCI_DMA_SPI_SPIR             17
+#define DAVINCI_DMA_UART0_URXEVT0        18
+#define DAVINCI_DMA_UART0_UTXEVT0        19
+#define DAVINCI_DMA_UART1_URXEVT1        20
+#define DAVINCI_DMA_UART1_UTXEVT1        21
+#define DAVINCI_DMA_UART2_URXEVT2        22
+#define DAVINCI_DMA_UART2_UTXEVT2        23
+#define DAVINCI_DMA_MEMSTK_MSEVT         24
+#define DAVINCI_DMA_MMCRXEVT             26
+#define DAVINCI_DMA_MMCTXEVT             27
+#define DAVINCI_DMA_I2C_ICREVT           28
+#define DAVINCI_DMA_I2C_ICXEVT           29
+#define DAVINCI_DMA_GPIO_GPINT0          32
+#define DAVINCI_DMA_GPIO_GPINT1          33
+#define DAVINCI_DMA_GPIO_GPINT2          34
+#define DAVINCI_DMA_GPIO_GPINT3          35
+#define DAVINCI_DMA_GPIO_GPINT4          36
+#define DAVINCI_DMA_GPIO_GPINT5          37
+#define DAVINCI_DMA_GPIO_GPINT6          38
+#define DAVINCI_DMA_GPIO_GPINT7          39
+#define DAVINCI_DMA_GPIO_GPBNKINT0       40
+#define DAVINCI_DMA_GPIO_GPBNKINT1       41
+#define DAVINCI_DMA_GPIO_GPBNKINT2       42
+#define DAVINCI_DMA_GPIO_GPBNKINT3       43
+#define DAVINCI_DMA_GPIO_GPBNKINT4       44
+#define DAVINCI_DMA_TIMER0_TINT0         48
+#define DAVINCI_DMA_TIMER1_TINT1         49
+#define DAVINCI_DMA_TIMER2_TINT2         50
+#define DAVINCI_DMA_TIMER3_TINT3         51
+#define DAVINCI_DMA_PWM0                 52
+#define DAVINCI_DMA_PWM1                 53
+#define DAVINCI_DMA_PWM2                 54
+
+/*ch_status paramater of callback function possible values*/
+#define DMA_COMPLETE 1
+#define DMA_CC_ERROR 2
+#define DMA_TC1_ERROR 3
+#define DMA_TC2_ERROR 4
+
+enum address_mode {
+	INCR = 0,
+	FIFO = 1
+};
+
+enum fifo_width {
+	W8BIT = 0,
+	W16BIT = 1,
+	W32BIT = 2,
+	W64BIT = 3,
+	W128BIT = 4,
+	W256BIT = 5
+};
+
+enum dma_event_q {
+	EVENTQ_0 = 0,
+	EVENTQ_1 = 1,
+	EVENTQ_DEFAULT = -1
+};
+
+enum sync_dimension {
+	ASYNC = 0,
+	ABSYNC = 1
+};
+
+#define EDMA_CHANNEL_ANY		-1	/* for edma_alloc_channel() */
+#define EDMA_SLOT_ANY			-1	/* for edma_alloc_slot() */
+
+/* alloc/free DMA channels and their dedicated parameter RAM slots */
+int edma_alloc_channel(int channel,
+	void (*callback)(unsigned channel, u16 ch_status, void *data),
+	void *data, enum dma_event_q);
+void edma_free_channel(unsigned channel);
+
+/* alloc/free parameter RAM slots */
+int edma_alloc_slot(int slot);
+void edma_free_slot(unsigned slot);
+
+/* calls that operate on part of a parameter RAM slot */
+void edma_set_src(unsigned slot, dma_addr_t src_port,
+				enum address_mode mode, enum fifo_width);
+void edma_set_dest(unsigned slot, dma_addr_t dest_port,
+				 enum address_mode mode, enum fifo_width);
+void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst);
+void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx);
+void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx);
+void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt,
+		u16 bcnt_rld, enum sync_dimension sync_mode);
+void edma_link(unsigned from, unsigned to);
+void edma_unlink(unsigned from);
+
+/* calls that operate on an entire parameter RAM slot */
+void edma_write_slot(unsigned slot, const struct edmacc_param *params);
+void edma_read_slot(unsigned slot, struct edmacc_param *params);
+
+/* channel control operations */
+int edma_start(unsigned channel);
+void edma_stop(unsigned channel);
+void edma_clean_channel(unsigned channel);
+void edma_clear_event(unsigned channel);
+void edma_pause(unsigned channel);
+void edma_resume(unsigned channel);
+
+/* UNRELATED TO DMA */
+int davinci_alloc_iram(unsigned size);
+void davinci_free_iram(unsigned addr, unsigned size);
+
+/* platform_data for EDMA driver */
+struct edma_soc_info {
+
+	/* how many dma resources of each type */
+	unsigned	n_channel;
+	unsigned	n_region;
+	unsigned	n_slot;
+	unsigned	n_tc;
+
+	/* list of channels with no even trigger; terminated by "-1" */
+	const s8	*noevent;
+};
+
+#endif

arch/arm/mach-davinci/include/mach/gpio.h

@@ -15,9 +15,11 @@
 
 #include <linux/io.h>
 #include <asm-generic/gpio.h>
-#include <mach/hardware.h>
+
 #include <mach/irqs.h>
 
+#define DAVINCI_GPIO_BASE 0x01C67000
+
 /*
  * basic gpio routines
  *
@@ -26,23 +28,18 @@
  * go through boot loaders.
  *
  * the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are
+ * need to pay attention to PINMUX registers to be sure those pins are
  * used as gpios, not with other peripherals.
  *
  * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation,
- * and maybe for later updates, code should write GPIO(N) or:
- *  - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53)
- *  - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70)
- *
- * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc
- * for now, that's != GPIO(N)
+ * and maybe for later updates, code may write GPIO(N).  These may be
+ * all 1.8V signals, all 3.3V ones, or a mix of the two.  A given chip
+ * may not support all the GPIOs in that range.
  *
  * GPIOs can also be on external chips, numbered after the ones built-in
  * to the DaVinci chip.  For now, they won't be usable as IRQ sources.
  */
-#define	GPIO(X)		(X)		/* 0 <= X <= 70 */
-#define	GPIOV18(X)	(X)		/* 1.8V i/o; 0 <= X <= 53 */
-#define	GPIOV33(X)	((X)+54)	/* 3.3V i/o; 0 <= X <= 17 */
+#define	GPIO(X)		(X)		/* 0 <= X <= (DAVINCI_N_GPIO - 1) */
 
 struct gpio_controller {
 	u32	dir;
@@ -71,12 +68,14 @@ __gpio_to_controller(unsigned gpio)
 {
 	void *__iomem ptr;
 
-	if (gpio < 32)
+	if (gpio < 32 * 1)
 		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
-	else if (gpio < 64)
+	else if (gpio < 32 * 2)
 		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
-	else if (gpio < DAVINCI_N_GPIO)
+	else if (gpio < 32 * 3)
 		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+	else if (gpio < 32 * 4)
+		ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88);
 	else
 		ptr = NULL;
 	return ptr;

arch/arm/mach-davinci/include/mach/hardware.h

@@ -1,9 +1,9 @@
 /*
- * Common hardware definitions
+ * Hardware definitions common to all DaVinci family processors
  *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ * Author: Kevin Hilman, Deep Root Systems, LLC
  *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
  * the terms of the GNU General Public License version 2. This program
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
@@ -12,41 +12,16 @@
 #define __ASM_ARCH_HARDWARE_H
 
 /*
- * Base register addresses
+ * Before you add anything to ths file:
+ *
+ * This header is for defines common to ALL DaVinci family chips.
+ * Anything that is chip specific should go in <chipname>.h,
+ * and the chip/board init code should then explicitly include
+ * <chipname>.h
  */
-#define DAVINCI_DMA_3PCC_BASE			(0x01C00000)
-#define DAVINCI_DMA_3PTC0_BASE			(0x01C10000)
-#define DAVINCI_DMA_3PTC1_BASE			(0x01C10400)
-#define DAVINCI_I2C_BASE			(0x01C21000)
-#define DAVINCI_PWM0_BASE			(0x01C22000)
-#define DAVINCI_PWM1_BASE			(0x01C22400)
-#define DAVINCI_PWM2_BASE			(0x01C22800)
-#define DAVINCI_SYSTEM_MODULE_BASE		(0x01C40000)
-#define DAVINCI_PLL_CNTRL0_BASE			(0x01C40800)
-#define DAVINCI_PLL_CNTRL1_BASE			(0x01C40C00)
-#define DAVINCI_PWR_SLEEP_CNTRL_BASE		(0x01C41000)
-#define DAVINCI_SYSTEM_DFT_BASE			(0x01C42000)
-#define DAVINCI_IEEE1394_BASE			(0x01C60000)
-#define DAVINCI_USB_OTG_BASE			(0x01C64000)
-#define DAVINCI_CFC_ATA_BASE			(0x01C66000)
-#define DAVINCI_SPI_BASE			(0x01C66800)
-#define DAVINCI_GPIO_BASE			(0x01C67000)
-#define DAVINCI_UHPI_BASE			(0x01C67800)
-#define DAVINCI_VPSS_REGS_BASE			(0x01C70000)
-#define DAVINCI_EMAC_CNTRL_REGS_BASE		(0x01C80000)
-#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE	(0x01C81000)
-#define DAVINCI_EMAC_WRAPPER_RAM_BASE		(0x01C82000)
-#define DAVINCI_MDIO_CNTRL_REGS_BASE		(0x01C84000)
-#define DAVINCI_IMCOP_BASE			(0x01CC0000)
-#define DAVINCI_ASYNC_EMIF_CNTRL_BASE		(0x01E00000)
-#define DAVINCI_VLYNQ_BASE			(0x01E01000)
-#define DAVINCI_MCBSP_BASE			(0x01E02000)
-#define DAVINCI_MMC_SD_BASE			(0x01E10000)
-#define DAVINCI_MS_BASE				(0x01E20000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	(0x02000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE	(0x04000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE	(0x06000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE	(0x08000000)
-#define DAVINCI_VLYNQ_REMOTE_BASE		(0x0C000000)
+#define DAVINCI_SYSTEM_MODULE_BASE        0x01C40000
+
+/* System control register offsets */
+#define DM64XX_VDD3P3V_PWDN	0x48
 
 #endif /* __ASM_ARCH_HARDWARE_H */

arch/arm/mach-davinci/include/mach/io.h

@@ -40,22 +40,12 @@
 #else
 #define IOMEM(x)                ((void __force __iomem *)(x))
 
-/*
- * Functions to access the DaVinci IO region
- *
- * NOTE: - Use davinci_read/write[bwl] for physical register addresses
- *	 - Use __raw_read/write[bwl]() for virtual register addresses
- *	 - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
- *	 - DO NOT use hardcoded virtual addresses to allow changing the
- *	   IO address space again if needed
- */
-#define davinci_readb(a)	__raw_readb(IO_ADDRESS(a))
-#define davinci_readw(a)	__raw_readw(IO_ADDRESS(a))
-#define davinci_readl(a)	__raw_readl(IO_ADDRESS(a))
+#define __arch_ioremap(p, s, t)	davinci_ioremap(p, s, t)
+#define __arch_iounmap(v)	davinci_iounmap(v)
 
-#define davinci_writeb(v, a)	__raw_writeb(v, IO_ADDRESS(a))
-#define davinci_writew(v, a)	__raw_writew(v, IO_ADDRESS(a))
-#define davinci_writel(v, a)	__raw_writel(v, IO_ADDRESS(a))
+void __iomem *davinci_ioremap(unsigned long phys, size_t size,
+			      unsigned int type);
+void davinci_iounmap(volatile void __iomem *addr);
 
 #endif /* __ASSEMBLER__ */
 #endif /* __ASM_ARCH_IO_H */

arch/arm/mach-davinci/include/mach/irqs.h

@@ -96,10 +96,111 @@
 #define IRQ_EMUINT       63
 
 #define DAVINCI_N_AINTC_IRQ	64
-#define DAVINCI_N_GPIO		71
+#define DAVINCI_N_GPIO		104
 
 #define NR_IRQS			(DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO)
 
 #define ARCH_TIMER_IRQ IRQ_TINT1_TINT34
 
+/* DaVinci DM6467-specific Interrupts */
+#define IRQ_DM646X_VP_VERTINT0  0
+#define IRQ_DM646X_VP_VERTINT1  1
+#define IRQ_DM646X_VP_VERTINT2  2
+#define IRQ_DM646X_VP_VERTINT3  3
+#define IRQ_DM646X_VP_ERRINT    4
+#define IRQ_DM646X_RESERVED_1   5
+#define IRQ_DM646X_RESERVED_2   6
+#define IRQ_DM646X_WDINT        7
+#define IRQ_DM646X_CRGENINT0    8
+#define IRQ_DM646X_CRGENINT1    9
+#define IRQ_DM646X_TSIFINT0     10
+#define IRQ_DM646X_TSIFINT1     11
+#define IRQ_DM646X_VDCEINT      12
+#define IRQ_DM646X_USBINT       13
+#define IRQ_DM646X_USBDMAINT    14
+#define IRQ_DM646X_PCIINT       15
+#define IRQ_DM646X_TCERRINT2    20
+#define IRQ_DM646X_TCERRINT3    21
+#define IRQ_DM646X_IDE          22
+#define IRQ_DM646X_HPIINT       23
+#define IRQ_DM646X_EMACRXTHINT  24
+#define IRQ_DM646X_EMACRXINT    25
+#define IRQ_DM646X_EMACTXINT    26
+#define IRQ_DM646X_EMACMISCINT  27
+#define IRQ_DM646X_MCASP0TXINT  28
+#define IRQ_DM646X_MCASP0RXINT  29
+#define IRQ_DM646X_RESERVED_3   31
+#define IRQ_DM646X_MCASP1TXINT  32
+#define IRQ_DM646X_VLQINT       38
+#define IRQ_DM646X_UARTINT2     42
+#define IRQ_DM646X_SPINT0       43
+#define IRQ_DM646X_SPINT1       44
+#define IRQ_DM646X_DSP2ARMINT   45
+#define IRQ_DM646X_RESERVED_4   46
+#define IRQ_DM646X_PSCINT       47
+#define IRQ_DM646X_GPIO0        48
+#define IRQ_DM646X_GPIO1        49
+#define IRQ_DM646X_GPIO2        50
+#define IRQ_DM646X_GPIO3        51
+#define IRQ_DM646X_GPIO4        52
+#define IRQ_DM646X_GPIO5        53
+#define IRQ_DM646X_GPIO6        54
+#define IRQ_DM646X_GPIO7        55
+#define IRQ_DM646X_GPIOBNK0     56
+#define IRQ_DM646X_GPIOBNK1     57
+#define IRQ_DM646X_GPIOBNK2     58
+#define IRQ_DM646X_DDRINT       59
+#define IRQ_DM646X_AEMIFINT     60
+
+/* DaVinci DM355-specific Interrupts */
+#define IRQ_DM355_CCDC_VDINT0	0
+#define IRQ_DM355_CCDC_VDINT1	1
+#define IRQ_DM355_CCDC_VDINT2	2
+#define IRQ_DM355_IPIPE_HST	3
+#define IRQ_DM355_H3AINT	4
+#define IRQ_DM355_IPIPE_SDR	5
+#define IRQ_DM355_IPIPEIFINT	6
+#define IRQ_DM355_OSDINT	7
+#define IRQ_DM355_VENCINT	8
+#define IRQ_DM355_IMCOPINT	11
+#define IRQ_DM355_RTOINT	13
+#define IRQ_DM355_TINT4		13
+#define IRQ_DM355_TINT2_TINT12	13
+#define IRQ_DM355_UARTINT2	14
+#define IRQ_DM355_TINT5		14
+#define IRQ_DM355_TINT2_TINT34	14
+#define IRQ_DM355_TINT6		15
+#define IRQ_DM355_TINT3_TINT12	15
+#define IRQ_DM355_SPINT1_0	17
+#define IRQ_DM355_SPINT1_1	18
+#define IRQ_DM355_SPINT2_0	19
+#define IRQ_DM355_SPINT2_1	21
+#define IRQ_DM355_TINT7		22
+#define IRQ_DM355_TINT3_TINT34	22
+#define IRQ_DM355_SDIOINT0	23
+#define IRQ_DM355_MMCINT0	26
+#define IRQ_DM355_MSINT		26
+#define IRQ_DM355_MMCINT1	27
+#define IRQ_DM355_PWMINT3	28
+#define IRQ_DM355_SDIOINT1	31
+#define IRQ_DM355_SPINT0_0	42
+#define IRQ_DM355_SPINT0_1	43
+#define IRQ_DM355_GPIO0		44
+#define IRQ_DM355_GPIO1		45
+#define IRQ_DM355_GPIO2		46
+#define IRQ_DM355_GPIO3		47
+#define IRQ_DM355_GPIO4		48
+#define IRQ_DM355_GPIO5		49
+#define IRQ_DM355_GPIO6		50
+#define IRQ_DM355_GPIO7		51
+#define IRQ_DM355_GPIO8		52
+#define IRQ_DM355_GPIO9		53
+#define IRQ_DM355_GPIOBNK0	54
+#define IRQ_DM355_GPIOBNK1	55
+#define IRQ_DM355_GPIOBNK2	56
+#define IRQ_DM355_GPIOBNK3	57
+#define IRQ_DM355_GPIOBNK4	58
+#define IRQ_DM355_GPIOBNK5	59
+#define IRQ_DM355_GPIOBNK6	60
+
 #endif /* __ASM_ARCH_IRQS_H */

arch/arm/mach-davinci/include/mach/mux.h

@@ -1,55 +1,183 @@
 /*
- * DaVinci pin multiplexing defines
+ * Table of the DAVINCI register configurations for the PINMUX combinations
  *
  * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
  *
+ * Based on linux/include/asm-arm/arch-omap/mux.h:
+ * Copyright (C) 2003 - 2005 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
  * 2007 (c) MontaVista Software, Inc. This file is licensed under
  * the terms of the GNU General Public License version 2. This program
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
+ *
+ * Copyright (C) 2008 Texas Instruments.
  */
-#ifndef __ASM_ARCH_MUX_H
-#define __ASM_ARCH_MUX_H
-
-#define DAVINCI_MUX_AEAW0	0
-#define DAVINCI_MUX_AEAW1	1
-#define DAVINCI_MUX_AEAW2	2
-#define DAVINCI_MUX_AEAW3	3
-#define DAVINCI_MUX_AEAW4	4
-#define DAVINCI_MUX_AECS4	10
-#define DAVINCI_MUX_AECS5	11
-#define DAVINCI_MUX_VLYNQWD0	12
-#define DAVINCI_MUX_VLYNQWD1	13
-#define DAVINCI_MUX_VLSCREN	14
-#define DAVINCI_MUX_VLYNQEN	15
-#define DAVINCI_MUX_HDIREN	16
-#define DAVINCI_MUX_ATAEN	17
-#define DAVINCI_MUX_RGB666	22
-#define DAVINCI_MUX_RGB888	23
-#define DAVINCI_MUX_LOEEN	24
-#define DAVINCI_MUX_LFLDEN	25
-#define DAVINCI_MUX_CWEN	26
-#define DAVINCI_MUX_CFLDEN	27
-#define DAVINCI_MUX_HPIEN	29
-#define DAVINCI_MUX_1394EN	30
-#define DAVINCI_MUX_EMACEN	31
-
-#define DAVINCI_MUX_LEVEL2	32
-#define DAVINCI_MUX_UART0	(DAVINCI_MUX_LEVEL2 + 0)
-#define DAVINCI_MUX_UART1	(DAVINCI_MUX_LEVEL2 + 1)
-#define DAVINCI_MUX_UART2	(DAVINCI_MUX_LEVEL2 + 2)
-#define DAVINCI_MUX_U2FLO	(DAVINCI_MUX_LEVEL2 + 3)
-#define DAVINCI_MUX_PWM0	(DAVINCI_MUX_LEVEL2 + 4)
-#define DAVINCI_MUX_PWM1	(DAVINCI_MUX_LEVEL2 + 5)
-#define DAVINCI_MUX_PWM2	(DAVINCI_MUX_LEVEL2 + 6)
-#define DAVINCI_MUX_I2C		(DAVINCI_MUX_LEVEL2 + 7)
-#define DAVINCI_MUX_SPI		(DAVINCI_MUX_LEVEL2 + 8)
-#define DAVINCI_MUX_MSTK	(DAVINCI_MUX_LEVEL2 + 9)
-#define DAVINCI_MUX_ASP		(DAVINCI_MUX_LEVEL2 + 10)
-#define DAVINCI_MUX_CLK0	(DAVINCI_MUX_LEVEL2 + 16)
-#define DAVINCI_MUX_CLK1	(DAVINCI_MUX_LEVEL2 + 17)
-#define DAVINCI_MUX_TIMIN	(DAVINCI_MUX_LEVEL2 + 18)
-
-extern void davinci_mux_peripheral(unsigned int mux, unsigned int enable);
-
-#endif /* __ASM_ARCH_MUX_H */
+
+#ifndef __INC_MACH_MUX_H
+#define __INC_MACH_MUX_H
+
+/* System module registers */
+#define PINMUX0			0x00
+#define PINMUX1			0x04
+/* dm355 only */
+#define PINMUX2			0x08
+#define PINMUX3			0x0c
+#define PINMUX4			0x10
+#define INTMUX			0x18
+#define EVTMUX			0x1c
+
+struct mux_config {
+	const char *name;
+	const char *mux_reg_name;
+	const unsigned char mux_reg;
+	const unsigned char mask_offset;
+	const unsigned char mask;
+	const unsigned char mode;
+	bool debug;
+};
+
+enum davinci_dm644x_index {
+	/* ATA and HDDIR functions */
+	DM644X_HDIREN,
+	DM644X_ATAEN,
+	DM644X_ATAEN_DISABLE,
+
+	/* HPI functions */
+	DM644X_HPIEN_DISABLE,
+
+	/* AEAW functions */
+	DM644X_AEAW,
+
+	/* Memory Stick */
+	DM644X_MSTK,
+
+	/* I2C */
+	DM644X_I2C,
+
+	/* ASP function */
+	DM644X_MCBSP,
+
+	/* UART1 */
+	DM644X_UART1,
+
+	/* UART2 */
+	DM644X_UART2,
+
+	/* PWM0 */
+	DM644X_PWM0,
+
+	/* PWM1 */
+	DM644X_PWM1,
+
+	/* PWM2 */
+	DM644X_PWM2,
+
+	/* VLYNQ function */
+	DM644X_VLYNQEN,
+	DM644X_VLSCREN,
+	DM644X_VLYNQWD,
+
+	/* EMAC and MDIO function */
+	DM644X_EMACEN,
+
+	/* GPIO3V[0:16] pins */
+	DM644X_GPIO3V,
+
+	/* GPIO pins */
+	DM644X_GPIO0,
+	DM644X_GPIO3,
+	DM644X_GPIO43_44,
+	DM644X_GPIO46_47,
+
+	/* VPBE */
+	DM644X_RGB666,
+
+	/* LCD */
+	DM644X_LOEEN,
+	DM644X_LFLDEN,
+};
+
+enum davinci_dm646x_index {
+	/* ATA function */
+	DM646X_ATAEN,
+
+	/* AUDIO Clock */
+	DM646X_AUDCK1,
+	DM646X_AUDCK0,
+
+	/* CRGEN Control */
+	DM646X_CRGMUX,
+
+	/* VPIF Control */
+	DM646X_STSOMUX_DISABLE,
+	DM646X_STSIMUX_DISABLE,
+	DM646X_PTSOMUX_DISABLE,
+	DM646X_PTSIMUX_DISABLE,
+
+	/* TSIF Control */
+	DM646X_STSOMUX,
+	DM646X_STSIMUX,
+	DM646X_PTSOMUX_PARALLEL,
+	DM646X_PTSIMUX_PARALLEL,
+	DM646X_PTSOMUX_SERIAL,
+	DM646X_PTSIMUX_SERIAL,
+};
+
+enum davinci_dm355_index {
+	/* MMC/SD 0 */
+	DM355_MMCSD0,
+
+	/* MMC/SD 1 */
+	DM355_SD1_CLK,
+	DM355_SD1_CMD,
+	DM355_SD1_DATA3,
+	DM355_SD1_DATA2,
+	DM355_SD1_DATA1,
+	DM355_SD1_DATA0,
+
+	/* I2C */
+	DM355_I2C_SDA,
+	DM355_I2C_SCL,
+
+	/* ASP0 function */
+	DM355_MCBSP0_BDX,
+	DM355_MCBSP0_X,
+	DM355_MCBSP0_BFSX,
+	DM355_MCBSP0_BDR,
+	DM355_MCBSP0_R,
+	DM355_MCBSP0_BFSR,
+
+	/* SPI0 */
+	DM355_SPI0_SDI,
+	DM355_SPI0_SDENA0,
+	DM355_SPI0_SDENA1,
+
+	/* IRQ muxing */
+	DM355_INT_EDMA_CC,
+	DM355_INT_EDMA_TC0_ERR,
+	DM355_INT_EDMA_TC1_ERR,
+
+	/* EDMA event muxing */
+	DM355_EVT8_ASP1_TX,
+	DM355_EVT9_ASP1_RX,
+	DM355_EVT26_MMC0_RX,
+};
+
+#ifdef CONFIG_DAVINCI_MUX
+/* setup pin muxing */
+extern void davinci_mux_init(void);
+extern int davinci_mux_register(const struct mux_config *pins,
+				unsigned long size);
+extern int davinci_cfg_reg(unsigned long reg_cfg);
+#else
+/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
+static inline void davinci_mux_init(void) {}
+static inline int davinci_mux_register(const struct mux_config *pins,
+				       unsigned long size) { return 0; }
+static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
+#endif
+
+#endif /* __INC_MACH_MUX_H */

arch/arm/mach-davinci/include/mach/psc.h

@@ -38,8 +38,6 @@
 #define DAVINCI_LPSC_TPTC1          4
 #define DAVINCI_LPSC_EMAC           5
 #define DAVINCI_LPSC_EMAC_WRAPPER   6
-#define DAVINCI_LPSC_MDIO           7
-#define DAVINCI_LPSC_IEEE1394       8
 #define DAVINCI_LPSC_USB            9
 #define DAVINCI_LPSC_ATA            10
 #define DAVINCI_LPSC_VLYNQ          11
@@ -47,7 +45,6 @@
 #define DAVINCI_LPSC_DDR_EMIF       13
 #define DAVINCI_LPSC_AEMIF          14
 #define DAVINCI_LPSC_MMC_SD         15
-#define DAVINCI_LPSC_MEMSTICK       16
 #define DAVINCI_LPSC_McBSP          17
 #define DAVINCI_LPSC_I2C            18
 #define DAVINCI_LPSC_UART0          19
@@ -73,4 +70,54 @@
 #define DAVINCI_LPSC_GEM            39
 #define DAVINCI_LPSC_IMCOP          40
 
+#define DM355_LPSC_TIMER3		5
+#define DM355_LPSC_SPI1			6
+#define DM355_LPSC_MMC_SD1		7
+#define DM355_LPSC_McBSP1		8
+#define DM355_LPSC_PWM3			10
+#define DM355_LPSC_SPI2			11
+#define DM355_LPSC_RTO			12
+#define DM355_LPSC_VPSS_DAC		41
+
+/*
+ * LPSC Assignments
+ */
+#define DM646X_LPSC_ARM            0
+#define DM646X_LPSC_C64X_CPU       1
+#define DM646X_LPSC_HDVICP0        2
+#define DM646X_LPSC_HDVICP1        3
+#define DM646X_LPSC_TPCC           4
+#define DM646X_LPSC_TPTC0          5
+#define DM646X_LPSC_TPTC1          6
+#define DM646X_LPSC_TPTC2          7
+#define DM646X_LPSC_TPTC3          8
+#define DM646X_LPSC_PCI            13
+#define DM646X_LPSC_EMAC           14
+#define DM646X_LPSC_VDCE           15
+#define DM646X_LPSC_VPSSMSTR       16
+#define DM646X_LPSC_VPSSSLV        17
+#define DM646X_LPSC_TSIF0          18
+#define DM646X_LPSC_TSIF1          19
+#define DM646X_LPSC_DDR_EMIF       20
+#define DM646X_LPSC_AEMIF          21
+#define DM646X_LPSC_McASP0         22
+#define DM646X_LPSC_McASP1         23
+#define DM646X_LPSC_CRGEN0         24
+#define DM646X_LPSC_CRGEN1         25
+#define DM646X_LPSC_UART0          26
+#define DM646X_LPSC_UART1          27
+#define DM646X_LPSC_UART2          28
+#define DM646X_LPSC_PWM0           29
+#define DM646X_LPSC_PWM1           30
+#define DM646X_LPSC_I2C            31
+#define DM646X_LPSC_SPI            32
+#define DM646X_LPSC_GPIO           33
+#define DM646X_LPSC_TIMER0         34
+#define DM646X_LPSC_TIMER1         35
+#define DM646X_LPSC_ARM_INTC       45
+
+extern int davinci_psc_is_clk_active(unsigned int id);
+extern void davinci_psc_config(unsigned int domain, unsigned int id,
+			       char enable);
+
 #endif /* __ASM_ARCH_PSC_H */

arch/arm/mach-davinci/include/mach/serial.h

@@ -13,8 +13,23 @@
 
 #include <mach/io.h>
 
-#define DAVINCI_UART0_BASE   (IO_PHYS + 0x20000)
-#define DAVINCI_UART1_BASE   (IO_PHYS + 0x20400)
-#define DAVINCI_UART2_BASE   (IO_PHYS + 0x20800)
+#define DAVINCI_MAX_NR_UARTS	3
+#define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
+#define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
+#define DAVINCI_UART2_BASE	(IO_PHYS + 0x20800)
+
+#define DM355_UART2_BASE	(IO_PHYS + 0x206000)
+
+/* DaVinci UART register offsets */
+#define UART_DAVINCI_PWREMU		0x0c
+#define UART_DM646X_SCR			0x10
+#define UART_DM646X_SCR_TX_WATERMARK	0x08
+
+struct davinci_uart_config {
+	/* Bit field of UARTs present; bit 0 --> UART1 */
+	unsigned int enabled_uarts;
+};
+
+extern void davinci_serial_init(struct davinci_uart_config *);
 
 #endif /* __ASM_ARCH_SERIAL_H */

arch/arm/mach-davinci/io.c

@@ -51,7 +51,26 @@ void __init davinci_map_common_io(void)
 	davinci_check_revision();
 }
 
-void __init davinci_init_common_hw(void)
+#define BETWEEN(p, st, sz)	((p) >= (st) && (p) < ((st) + (sz)))
+#define XLATE(p, pst, vst)	((void __iomem *)((p) - (pst) + (vst)))
+
+/*
+ * Intercept ioremap() requests for addresses in our fixed mapping regions.
+ */
+void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type)
+{
+	if (BETWEEN(p, IO_PHYS, IO_SIZE))
+		return XLATE(p, IO_PHYS, IO_VIRT);
+
+	return __arm_ioremap(p, size, type);
+}
+EXPORT_SYMBOL(davinci_ioremap);
+
+void davinci_iounmap(volatile void __iomem *addr)
 {
-	davinci_clk_init();
+	unsigned long virt = (unsigned long)addr;
+
+	if (virt >= VMALLOC_START && virt < VMALLOC_END)
+		__iounmap(addr);
 }
+EXPORT_SYMBOL(davinci_iounmap);

arch/arm/mach-davinci/irq.c

@@ -25,6 +25,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/cputype.h>
 #include <asm/mach/irq.h>
 
 #define IRQ_BIT(irq)		((irq) & 0x1f)
@@ -40,14 +41,18 @@
 #define IRQ_INTPRI0_REG_OFFSET	0x0030
 #define IRQ_INTPRI7_REG_OFFSET	0x004C
 
+const u8 *davinci_def_priorities;
+
+#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
+
 static inline unsigned int davinci_irq_readl(int offset)
 {
-	return davinci_readl(DAVINCI_ARM_INTC_BASE + offset);
+	return __raw_readl(INTC_BASE + offset);
 }
 
 static inline void davinci_irq_writel(unsigned long value, int offset)
 {
-	davinci_writel(value, DAVINCI_ARM_INTC_BASE + offset);
+	__raw_writel(value, INTC_BASE + offset);
 }
 
 /* Disable interrupt */
@@ -108,9 +113,8 @@ static struct irq_chip davinci_irq_chip_0 = {
 	.unmask = davinci_unmask_irq,
 };
 
-
 /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
-static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
+static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
 	[IRQ_VDINT0]		= 2,
 	[IRQ_VDINT1]		= 6,
 	[IRQ_VDINT2]		= 6,
@@ -177,11 +181,149 @@ static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
 	[IRQ_EMUINT]		= 7,
 };
 
+static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+	[IRQ_DM646X_VP_VERTINT0]        = 7,
+	[IRQ_DM646X_VP_VERTINT1]        = 7,
+	[IRQ_DM646X_VP_VERTINT2]        = 7,
+	[IRQ_DM646X_VP_VERTINT3]        = 7,
+	[IRQ_DM646X_VP_ERRINT]          = 7,
+	[IRQ_DM646X_RESERVED_1]         = 7,
+	[IRQ_DM646X_RESERVED_2]         = 7,
+	[IRQ_DM646X_WDINT]              = 7,
+	[IRQ_DM646X_CRGENINT0]          = 7,
+	[IRQ_DM646X_CRGENINT1]          = 7,
+	[IRQ_DM646X_TSIFINT0]           = 7,
+	[IRQ_DM646X_TSIFINT1]           = 7,
+	[IRQ_DM646X_VDCEINT]            = 7,
+	[IRQ_DM646X_USBINT]             = 7,
+	[IRQ_DM646X_USBDMAINT]          = 7,
+	[IRQ_DM646X_PCIINT]             = 7,
+	[IRQ_CCINT0]                    = 7,    /* dma */
+	[IRQ_CCERRINT]                  = 7,    /* dma */
+	[IRQ_TCERRINT0]                 = 7,    /* dma */
+	[IRQ_TCERRINT]                  = 7,    /* dma */
+	[IRQ_DM646X_TCERRINT2]          = 7,
+	[IRQ_DM646X_TCERRINT3]          = 7,
+	[IRQ_DM646X_IDE]                = 7,
+	[IRQ_DM646X_HPIINT]             = 7,
+	[IRQ_DM646X_EMACRXTHINT]        = 7,
+	[IRQ_DM646X_EMACRXINT]          = 7,
+	[IRQ_DM646X_EMACTXINT]          = 7,
+	[IRQ_DM646X_EMACMISCINT]        = 7,
+	[IRQ_DM646X_MCASP0TXINT]        = 7,
+	[IRQ_DM646X_MCASP0RXINT]        = 7,
+	[IRQ_AEMIFINT]                  = 7,
+	[IRQ_DM646X_RESERVED_3]         = 7,
+	[IRQ_DM646X_MCASP1TXINT]        = 7,    /* clockevent */
+	[IRQ_TINT0_TINT34]              = 7,    /* clocksource */
+	[IRQ_TINT1_TINT12]              = 7,    /* DSP timer */
+	[IRQ_TINT1_TINT34]              = 7,    /* system tick */
+	[IRQ_PWMINT0]                   = 7,
+	[IRQ_PWMINT1]                   = 7,
+	[IRQ_DM646X_VLQINT]             = 7,
+	[IRQ_I2C]                       = 7,
+	[IRQ_UARTINT0]                  = 7,
+	[IRQ_UARTINT1]                  = 7,
+	[IRQ_DM646X_UARTINT2]           = 7,
+	[IRQ_DM646X_SPINT0]             = 7,
+	[IRQ_DM646X_SPINT1]             = 7,
+	[IRQ_DM646X_DSP2ARMINT]         = 7,
+	[IRQ_DM646X_RESERVED_4]         = 7,
+	[IRQ_DM646X_PSCINT]             = 7,
+	[IRQ_DM646X_GPIO0]              = 7,
+	[IRQ_DM646X_GPIO1]              = 7,
+	[IRQ_DM646X_GPIO2]              = 7,
+	[IRQ_DM646X_GPIO3]              = 7,
+	[IRQ_DM646X_GPIO4]              = 7,
+	[IRQ_DM646X_GPIO5]              = 7,
+	[IRQ_DM646X_GPIO6]              = 7,
+	[IRQ_DM646X_GPIO7]              = 7,
+	[IRQ_DM646X_GPIOBNK0]           = 7,
+	[IRQ_DM646X_GPIOBNK1]           = 7,
+	[IRQ_DM646X_GPIOBNK2]           = 7,
+	[IRQ_DM646X_DDRINT]             = 7,
+	[IRQ_DM646X_AEMIFINT]           = 7,
+	[IRQ_COMMTX]                    = 7,
+	[IRQ_COMMRX]                    = 7,
+	[IRQ_EMUINT]                    = 7,
+};
+
+static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+	[IRQ_DM355_CCDC_VDINT0]		= 2,
+	[IRQ_DM355_CCDC_VDINT1]		= 6,
+	[IRQ_DM355_CCDC_VDINT2]		= 6,
+	[IRQ_DM355_IPIPE_HST]		= 6,
+	[IRQ_DM355_H3AINT]		= 6,
+	[IRQ_DM355_IPIPE_SDR]		= 6,
+	[IRQ_DM355_IPIPEIFINT]		= 6,
+	[IRQ_DM355_OSDINT]		= 7,
+	[IRQ_DM355_VENCINT]		= 6,
+	[IRQ_ASQINT]			= 6,
+	[IRQ_IMXINT]			= 6,
+	[IRQ_USBINT]			= 4,
+	[IRQ_DM355_RTOINT]		= 4,
+	[IRQ_DM355_UARTINT2]		= 7,
+	[IRQ_DM355_TINT6]		= 7,
+	[IRQ_CCINT0]			= 5,	/* dma */
+	[IRQ_CCERRINT]			= 5,	/* dma */
+	[IRQ_TCERRINT0]			= 5,	/* dma */
+	[IRQ_TCERRINT]			= 5,	/* dma */
+	[IRQ_DM355_SPINT2_1]		= 7,
+	[IRQ_DM355_TINT7]		= 4,
+	[IRQ_DM355_SDIOINT0]		= 7,
+	[IRQ_MBXINT]			= 7,
+	[IRQ_MBRINT]			= 7,
+	[IRQ_MMCINT]			= 7,
+	[IRQ_DM355_MMCINT1]		= 7,
+	[IRQ_DM355_PWMINT3]		= 7,
+	[IRQ_DDRINT]			= 7,
+	[IRQ_AEMIFINT]			= 7,
+	[IRQ_DM355_SDIOINT1]		= 4,
+	[IRQ_TINT0_TINT12]		= 2,	/* clockevent */
+	[IRQ_TINT0_TINT34]		= 2,	/* clocksource */
+	[IRQ_TINT1_TINT12]		= 7,	/* DSP timer */
+	[IRQ_TINT1_TINT34]		= 7,	/* system tick */
+	[IRQ_PWMINT0]			= 7,
+	[IRQ_PWMINT1]			= 7,
+	[IRQ_PWMINT2]			= 7,
+	[IRQ_I2C]			= 3,
+	[IRQ_UARTINT0]			= 3,
+	[IRQ_UARTINT1]			= 3,
+	[IRQ_DM355_SPINT0_0]		= 3,
+	[IRQ_DM355_SPINT0_1]		= 3,
+	[IRQ_DM355_GPIO0]		= 3,
+	[IRQ_DM355_GPIO1]		= 7,
+	[IRQ_DM355_GPIO2]		= 4,
+	[IRQ_DM355_GPIO3]		= 4,
+	[IRQ_DM355_GPIO4]		= 7,
+	[IRQ_DM355_GPIO5]		= 7,
+	[IRQ_DM355_GPIO6]		= 7,
+	[IRQ_DM355_GPIO7]		= 7,
+	[IRQ_DM355_GPIO8]		= 7,
+	[IRQ_DM355_GPIO9]		= 7,
+	[IRQ_DM355_GPIOBNK0]		= 7,
+	[IRQ_DM355_GPIOBNK1]		= 7,
+	[IRQ_DM355_GPIOBNK2]		= 7,
+	[IRQ_DM355_GPIOBNK3]		= 7,
+	[IRQ_DM355_GPIOBNK4]		= 7,
+	[IRQ_DM355_GPIOBNK5]		= 7,
+	[IRQ_DM355_GPIOBNK6]		= 7,
+	[IRQ_COMMTX]			= 7,
+	[IRQ_COMMRX]			= 7,
+	[IRQ_EMUINT]			= 7,
+};
+
 /* ARM Interrupt Controller Initialization */
 void __init davinci_irq_init(void)
 {
 	unsigned i;
-	const u8 *priority = default_priorities;
+
+	if (cpu_is_davinci_dm644x())
+		davinci_def_priorities = dm644x_default_priorities;
+	else if (cpu_is_davinci_dm646x())
+		davinci_def_priorities = dm646x_default_priorities;
+	else if (cpu_is_davinci_dm355())
+		davinci_def_priorities = dm355_default_priorities;
 
 	/* Clear all interrupt requests */
 	davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
@@ -209,8 +351,8 @@ void __init davinci_irq_init(void)
 		unsigned	j;
 		u32		pri;
 
-		for (j = 0, pri = 0; j < 32; j += 4, priority++)
-			pri |= (*priority & 0x07) << j;
+		for (j = 0, pri = 0; j < 32; j += 4, davinci_def_priorities++)
+			pri |= (*davinci_def_priorities & 0x07) << j;
 		davinci_irq_writel(pri, i);
 	}
 

arch/arm/mach-davinci/mux.c

@@ -1,41 +1,103 @@
 /*
- * DaVinci pin multiplexing configurations
+ * Utility to set the DAVINCI MUX register from a table in mux.h
  *
  * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
  *
+ * Based on linux/arch/arm/plat-omap/mux.c:
+ * Copyright (C) 2003 - 2005 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
  * 2007 (c) MontaVista Software, Inc. This file is licensed under
  * the terms of the GNU General Public License version 2. This program
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
+ *
+ * Copyright (C) 2008 Texas Instruments.
  */
 #include <linux/io.h>
+#include <linux/module.h>
 #include <linux/spinlock.h>
 
 #include <mach/hardware.h>
-
 #include <mach/mux.h>
 
-/* System control register offsets */
-#define PINMUX0         0x00
-#define PINMUX1         0x04
+static const struct mux_config *mux_table;
+static unsigned long pin_table_sz;
+
+int __init davinci_mux_register(const struct mux_config *pins,
+				unsigned long size)
+{
+	mux_table = pins;
+	pin_table_sz = size;
 
-static DEFINE_SPINLOCK(mux_lock);
+	return 0;
+}
 
-void davinci_mux_peripheral(unsigned int mux, unsigned int enable)
+/*
+ * Sets the DAVINCI MUX register based on the table
+ */
+int __init_or_module davinci_cfg_reg(const unsigned long index)
 {
-	u32 pinmux, muxreg = PINMUX0;
+	static DEFINE_SPINLOCK(mux_spin_lock);
+	void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+	unsigned long flags;
+	const struct mux_config *cfg;
+	unsigned int reg_orig = 0, reg = 0;
+	unsigned int mask, warn = 0;
+
+	if (!mux_table)
+		BUG();
+
+	if (index >= pin_table_sz) {
+		printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
+		       index, pin_table_sz);
+		dump_stack();
+		return -ENODEV;
+	}
+
+	cfg = &mux_table[index];
+
+	if (cfg->name == NULL) {
+		printk(KERN_ERR "No entry for the specified index\n");
+		return -ENODEV;
+	}
+
+	/* Update the mux register in question */
+	if (cfg->mask) {
+		unsigned	tmp1, tmp2;
+
+		spin_lock_irqsave(&mux_spin_lock, flags);
+		reg_orig = __raw_readl(base + cfg->mux_reg);
+
+		mask = (cfg->mask << cfg->mask_offset);
+		tmp1 = reg_orig & mask;
+		reg = reg_orig & ~mask;
+
+		tmp2 = (cfg->mode << cfg->mask_offset);
+		reg |= tmp2;
+
+		if (tmp1 != tmp2)
+			warn = 1;
+
+		__raw_writel(reg, base + cfg->mux_reg);
+		spin_unlock_irqrestore(&mux_spin_lock, flags);
+	}
+
+	if (warn) {
+#ifdef CONFIG_DAVINCI_MUX_WARNINGS
+		printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
+#endif
+	}
 
-	if (mux >= DAVINCI_MUX_LEVEL2) {
-		muxreg = PINMUX1;
-		mux -= DAVINCI_MUX_LEVEL2;
+#ifdef CONFIG_DAVINCI_MUX_DEBUG
+	if (cfg->debug || warn) {
+		printk(KERN_WARNING "MUX: Setting register %s\n", cfg->name);
+		printk(KERN_WARNING "	   %s (0x%08x) = 0x%08x -> 0x%08x\n",
+		       cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
 	}
+#endif
 
-	spin_lock(&mux_lock);
-	pinmux = davinci_readl(DAVINCI_SYSTEM_MODULE_BASE + muxreg);
-	if (enable)
-		pinmux |= (1 << mux);
-	else
-		pinmux &= ~(1 << mux);
-	davinci_writel(pinmux, DAVINCI_SYSTEM_MODULE_BASE + muxreg);
-	spin_unlock(&mux_lock);
+	return 0;
 }
+EXPORT_SYMBOL(davinci_cfg_reg);

arch/arm/mach-davinci/mux.h

@@ -0,0 +1,51 @@
+/*
+ * Pin-multiplex helper macros for TI DaVinci family devices
+ *
+ * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Copyright (C) 2008 Texas Instruments.
+ */
+#ifndef _MACH_DAVINCI_MUX_H_
+#define _MACH_DAVINCI_MUX_H_
+
+#include <mach/mux.h>
+
+#define MUX_CFG(soc, desc, muxreg, mode_offset, mode_mask, mux_mode, dbg)\
+[soc##_##desc] = {							\
+			.name =  #desc,					\
+			.debug = dbg,					\
+			.mux_reg_name = "PINMUX"#muxreg,		\
+			.mux_reg = PINMUX##muxreg,			\
+			.mask_offset = mode_offset,			\
+			.mask = mode_mask,				\
+			.mode = mux_mode,				\
+		},
+
+#define INT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg)	\
+[soc##_##desc] = {							\
+			.name =  #desc,					\
+			.debug = dbg,					\
+			.mux_reg_name = "INTMUX",			\
+			.mux_reg = INTMUX,				\
+			.mask_offset = mode_offset,			\
+			.mask = mode_mask,				\
+			.mode = mux_mode,				\
+		},
+
+#define EVT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg)	\
+[soc##_##desc] = {							\
+			.name =  #desc,					\
+			.debug = dbg,					\
+			.mux_reg_name = "EVTMUX",			\
+			.mux_reg = EVTMUX,				\
+			.mask_offset = mode_offset,			\
+			.mask = mode_mask,				\
+			.mode = mux_mode,				\
+		},
+
+#endif /* _MACH_DAVINCI_MUX_H */