Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (137 commits)
  ARM: bcmring: convert to use sp804 clockevents
  ARM: bcmring: convert to sp804 clocksource
  ARM: 6912/1: bcmring: Add clkdev table in init_early
  clockevents: ARM sp804: obtain sp804 timer rate via clks
  clockevents: ARM sp804: allow clockevent name to be specified
  clocksource: ARM sp804: obtain sp804 timer rate via clks
  clocksource: ARM sp804: allow clocksource name to be specified
  clocksource: convert OMAP1 to 32-bit down counting clocksource
  clocksource: convert MXS timrotv2 to 32-bit down counting clocksource
  clocksource: convert SPEAr platforms 16-bit up counting clocksource
  clocksource: convert Integrator/AP 16-bit down counting clocksource
  clocksource: convert W90x900 24-bit down counting clocksource
  clocksource: convert ARM 32-bit down counting clocksources
  clocksource: convert ARM 32-bit up counting clocksources
  clocksource: add common mmio clocksource
  ARM: update sa1100 to reflect PXA updates
  ARM: omap1: convert to using readl/writel instead of volatile struct
  ARM: omap1: delete useless interrupt handler
  ARM: s5p: consolidate selection of timer register
  ARM: 6939/1: fix missing 'cpu_relax()' declaration
  ...

arch/arm/Kconfig

@@ -197,15 +197,21 @@ config ARM_PATCH_PHYS_VIRT
 	depends on !XIP_KERNEL && MMU
 	depends on !ARCH_REALVIEW || !SPARSEMEM
 	help
-	  Patch phys-to-virt translation functions at runtime according to
-	  the position of the kernel in system memory.
+	  Patch phys-to-virt and virt-to-phys translation functions at
+	  boot and module load time according to the position of the
+	  kernel in system memory.
 
-	  This can only be used with non-XIP with MMU kernels where
-	  the base of physical memory is at a 16MB boundary.
+	  This can only be used with non-XIP MMU kernels where the base
+	  of physical memory is at a 16MB boundary, or theoretically 64K
+	  for the MSM machine class.
 
 config ARM_PATCH_PHYS_VIRT_16BIT
 	def_bool y
 	depends on ARM_PATCH_PHYS_VIRT && ARCH_MSM
+	help
+	  This option extends the physical to virtual translation patching
+	  to allow physical memory down to a theoretical minimum of 64K
+	  boundaries.
 
 source "init/Kconfig"
 
@@ -297,6 +303,7 @@ config ARCH_BCMRING
 	depends on MMU
 	select CPU_V6
 	select ARM_AMBA
+	select ARM_TIMER_SP804
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
@@ -366,6 +373,7 @@ config ARCH_MXC
 	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select HAVE_SCHED_CLOCK
 	help
 	  Support for Freescale MXC/iMX-based family of processors
@@ -375,21 +383,13 @@ config ARCH_MXS
 	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	help
 	  Support for Freescale MXS-based family of processors
 
-config ARCH_STMP3XXX
-	bool "Freescale STMP3xxx"
-	select CPU_ARM926T
-	select CLKDEV_LOOKUP
-	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_CLOCKEVENTS
-	select USB_ARCH_HAS_EHCI
-	help
-	  Support for systems based on the Freescale 3xxx CPUs.
-
 config ARCH_NETX
 	bool "Hilscher NetX based"
+	select CLKSRC_MMIO
 	select CPU_ARM926T
 	select ARM_VIC
 	select GENERIC_CLOCKEVENTS
@@ -457,6 +457,7 @@ config ARCH_IXP2000
 config ARCH_IXP4XX
 	bool "IXP4xx-based"
 	depends on MMU
+	select CLKSRC_MMIO
 	select CPU_XSCALE
 	select GENERIC_GPIO
 	select GENERIC_CLOCKEVENTS
@@ -468,7 +469,7 @@ config ARCH_IXP4XX
 
 config ARCH_DOVE
 	bool "Marvell Dove"
-	select CPU_V6K
+	select CPU_V7
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
@@ -497,6 +498,7 @@ config ARCH_LOKI
 
 config ARCH_LPC32XX
 	bool "NXP LPC32XX"
+	select CLKSRC_MMIO
 	select CPU_ARM926T
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_IDE
@@ -554,23 +556,12 @@ config ARCH_KS8695
 	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
 	  System-on-Chip devices.
 
-config ARCH_NS9XXX
-	bool "NetSilicon NS9xxx"
-	select CPU_ARM926T
-	select GENERIC_GPIO
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
-	help
-	  Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
-	  System.
-
-	  <http://www.digi.com/products/microprocessors/index.jsp>
-
 config ARCH_W90X900
 	bool "Nuvoton W90X900 CPU"
 	select CPU_ARM926T
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	help
 	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
@@ -592,6 +583,7 @@ config ARCH_NUC93X
 config ARCH_TEGRA
 	bool "NVIDIA Tegra"
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
@@ -617,6 +609,7 @@ config ARCH_PXA
 	select ARCH_MTD_XIP
 	select ARCH_HAS_CPUFREQ
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
 	select HAVE_SCHED_CLOCK
@@ -667,6 +660,7 @@ config ARCH_RPC
 
 config ARCH_SA1100
 	bool "SA1100-based"
+	select CLKSRC_MMIO
 	select CPU_SA1100
 	select ISA
 	select ARCH_SPARSEMEM_ENABLE
@@ -803,6 +797,7 @@ config ARCH_SHARK
 
 config ARCH_TCC_926
 	bool "Telechips TCC ARM926-based systems"
+	select CLKSRC_MMIO
 	select CPU_ARM926T
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
@@ -813,6 +808,7 @@ config ARCH_TCC_926
 config ARCH_U300
 	bool "ST-Ericsson U300 Series"
 	depends on MMU
+	select CLKSRC_MMIO
 	select CPU_ARM926T
 	select HAVE_SCHED_CLOCK
 	select HAVE_TCM
@@ -854,6 +850,7 @@ config ARCH_DAVINCI
 	select HAVE_IDE
 	select CLKDEV_LOOKUP
 	select GENERIC_ALLOCATOR
+	select GENERIC_IRQ_CHIP
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
 	  Support for TI's DaVinci platform.
@@ -874,6 +871,7 @@ config PLAT_SPEAR
 	select ARM_AMBA
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
 	help
@@ -951,8 +949,6 @@ source "arch/arm/mach-netx/Kconfig"
 source "arch/arm/mach-nomadik/Kconfig"
 source "arch/arm/plat-nomadik/Kconfig"
 
-source "arch/arm/mach-ns9xxx/Kconfig"
-
 source "arch/arm/mach-nuc93x/Kconfig"
 
 source "arch/arm/plat-omap/Kconfig"
@@ -1005,8 +1001,6 @@ source "arch/arm/mach-exynos4/Kconfig"
 
 source "arch/arm/mach-shmobile/Kconfig"
 
-source "arch/arm/plat-stmp3xxx/Kconfig"
-
 source "arch/arm/mach-tegra/Kconfig"
 
 source "arch/arm/mach-u300/Kconfig"
@@ -1033,6 +1027,8 @@ config PLAT_IOP
 
 config PLAT_ORION
 	bool
+	select CLKSRC_MMIO
+	select GENERIC_IRQ_CHIP
 	select HAVE_SCHED_CLOCK
 
 config PLAT_PXA
@@ -1043,6 +1039,7 @@ config PLAT_VERSATILE
 
 config ARM_TIMER_SP804
 	bool
+	select CLKSRC_MMIO
 
 source arch/arm/mm/Kconfig
 
@@ -1318,8 +1315,7 @@ menu "Kernel Features"
 source "kernel/time/Kconfig"
 
 config SMP
-	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	bool "Symmetric Multi-Processing"
 	depends on CPU_V6K || CPU_V7
 	depends on GENERIC_CLOCKEVENTS
 	depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
@@ -1521,8 +1517,8 @@ config ARCH_SELECT_MEMORY_MODEL
 	def_bool ARCH_SPARSEMEM_ENABLE
 
 config HIGHMEM
-	bool "High Memory Support (EXPERIMENTAL)"
-	depends on MMU && EXPERIMENTAL
+	bool "High Memory Support"
+	depends on MMU
 	help
 	  The address space of ARM processors is only 4 Gigabytes large
 	  and it has to accommodate user address space, kernel address
@@ -1742,16 +1738,31 @@ config CMDLINE
 	  time by entering them here. As a minimum, you should specify the
 	  memory size and the root device (e.g., mem=64M root=/dev/nfs).
 
+choice
+	prompt "Kernel command line type" if CMDLINE != ""
+	default CMDLINE_FROM_BOOTLOADER
+
+config CMDLINE_FROM_BOOTLOADER
+	bool "Use bootloader kernel arguments if available"
+	help
+	  Uses the command-line options passed by the boot loader. If
+	  the boot loader doesn't provide any, the default kernel command
+	  string provided in CMDLINE will be used.
+
+config CMDLINE_EXTEND
+	bool "Extend bootloader kernel arguments"
+	help
+	  The command-line arguments provided by the boot loader will be
+	  appended to the default kernel command string.
+
 config CMDLINE_FORCE
 	bool "Always use the default kernel command string"
-	depends on CMDLINE != ""
 	help
 	  Always use the default kernel command string, even if the boot
 	  loader passes other arguments to the kernel.
 	  This is useful if you cannot or don't want to change the
 	  command-line options your boot loader passes to the kernel.
-
-	  If unsure, say N.
+endchoice
 
 config XIP_KERNEL
 	bool "Kernel Execute-In-Place from ROM"
@@ -2010,7 +2021,7 @@ menu "Power management options"
 source "kernel/power/Kconfig"
 
 config ARCH_SUSPEND_POSSIBLE
-	depends on !ARCH_S5P64X0 && !ARCH_S5P6442
+	depends on !ARCH_S5P64X0 && !ARCH_S5P6442 && !ARCH_S5PC100
 	depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
 		CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE
 	def_bool y

arch/arm/Makefile

@@ -158,13 +158,11 @@ machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
 machine-$(CONFIG_ARCH_MX1)		:= imx
 machine-$(CONFIG_ARCH_MX2)		:= imx
 machine-$(CONFIG_ARCH_MX25)		:= imx
-machine-$(CONFIG_ARCH_MX3)		:= mx3
+machine-$(CONFIG_ARCH_MX3)		:= imx
 machine-$(CONFIG_ARCH_MX5)		:= mx5
-machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 machine-$(CONFIG_ARCH_MXS)		:= mxs
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
-machine-$(CONFIG_ARCH_NS9XXX)		:= ns9xxx
 machine-$(CONFIG_ARCH_OMAP1)		:= omap1
 machine-$(CONFIG_ARCH_OMAP2)		:= omap2
 machine-$(CONFIG_ARCH_OMAP3)		:= omap2
@@ -185,8 +183,6 @@ machine-$(CONFIG_ARCH_EXYNOS4)		:= exynos4
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_SHMOBILE) 	:= shmobile
-machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
-machine-$(CONFIG_ARCH_STMP37XX)		:= stmp37xx
 machine-$(CONFIG_ARCH_TCC8K)		:= tcc8k
 machine-$(CONFIG_ARCH_TEGRA)		:= tegra
 machine-$(CONFIG_ARCH_U300)		:= u300
@@ -207,7 +203,6 @@ machine-$(CONFIG_MACH_SPEAR600)		:= spear6xx
 plat-$(CONFIG_ARCH_MXC)		:= mxc
 plat-$(CONFIG_ARCH_OMAP)	:= omap
 plat-$(CONFIG_ARCH_S3C64XX)	:= samsung
-plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 plat-$(CONFIG_ARCH_TCC_926)	:= tcc
 plat-$(CONFIG_PLAT_IOP)		:= iop
 plat-$(CONFIG_PLAT_NOMADIK)	:= nomadik

arch/arm/boot/compressed/Makefile

@@ -98,8 +98,6 @@ endif
 ccflags-y := -fpic -fno-builtin
 asflags-y := -Wa,-march=all
 
-# Provide size of uncompressed kernel to the decompressor via a linker symbol.
-LDFLAGS_vmlinux = --defsym _image_size=$(shell stat -c "%s" $(obj)/../Image)
 # Supply ZRELADDR to the decompressor via a linker symbol.
 ifneq ($(CONFIG_AUTO_ZRELADDR),y)
 LDFLAGS_vmlinux += --defsym zreladdr=$(ZRELADDR)
@@ -122,10 +120,23 @@ lib1funcs = $(obj)/lib1funcs.o
 $(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE
 	$(call cmd,shipped)
 
+# We need to prevent any GOTOFF relocs being used with references
+# to symbols in the .bss section since we cannot relocate them
+# independently from the rest at run time.  This can be achieved by
+# ensuring that no private .bss symbols exist, as global symbols
+# always have a GOT entry which is what we need.
+# The .data section is already discarded by the linker script so no need
+# to bother about it here.
+check_for_bad_syms = \
+bad_syms=$$($(CROSS_COMPILE)nm $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \
+[ -z "$$bad_syms" ] || \
+  ( echo "following symbols must have non local/private scope:" >&2; \
+    echo "$$bad_syms" >&2; rm -f $@; false )
+
 $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
 	 	$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE
 	$(call if_changed,ld)
-	@:
+	@$(check_for_bad_syms)
 
 $(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE
 	$(call if_changed,$(suffix_y))

arch/arm/boot/compressed/decompress.c

@@ -44,7 +44,7 @@ extern void error(char *);
 #include "../../../../lib/decompress_unlzma.c"
 #endif
 
-void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x))
+int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x))
 {
-	decompress(input, len, NULL, NULL, output, NULL, error);
+	return decompress(input, len, NULL, NULL, output, NULL, error);
 }

arch/arm/boot/compressed/head.S

@@ -179,7 +179,7 @@ not_angel:
 		bl	cache_on
 
 restart:	adr	r0, LC0
-		ldmia	r0, {r1, r2, r3, r6, r9, r11, r12}
+		ldmia	r0, {r1, r2, r3, r6, r10, r11, r12}
 		ldr	sp, [r0, #28]
 
 		/*
@@ -188,6 +188,20 @@ restart:	adr	r0, LC0
 		 */
 		sub	r0, r0, r1		@ calculate the delta offset
 		add	r6, r6, r0		@ _edata
+		add	r10, r10, r0		@ inflated kernel size location
+
+		/*
+		 * The kernel build system appends the size of the
+		 * decompressed kernel at the end of the compressed data
+		 * in little-endian form.
+		 */
+		ldrb	r9, [r10, #0]
+		ldrb	lr, [r10, #1]
+		orr	r9, r9, lr, lsl #8
+		ldrb	lr, [r10, #2]
+		ldrb	r10, [r10, #3]
+		orr	r9, r9, lr, lsl #16
+		orr	r9, r9, r10, lsl #24
 
 #ifndef CONFIG_ZBOOT_ROM
 		/* malloc space is above the relocated stack (64k max) */
@@ -347,10 +361,10 @@ LC0:		.word	LC0			@ r1
 		.word	__bss_start		@ r2
 		.word	_end			@ r3
 		.word	_edata			@ r6
-		.word	_image_size		@ r9
+		.word	input_data_end - 4	@ r10 (inflated size location)
 		.word	_got_start		@ r11
 		.word	_got_end		@ ip
-		.word	user_stack_end		@ sp
+		.word	.L_user_stack_end	@ sp
 		.size	LC0, . - LC0
 
 #ifdef CONFIG_ARCH_RPC
@@ -459,7 +473,11 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
 		orr	r1, r1, #3 << 10
 		add	r2, r3, #16384
 1:		cmp	r1, r9			@ if virt > start of RAM
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+		orrhs	r1, r1, #0x08		@ set cacheable
+#else
 		orrhs	r1, r1, #0x0c		@ set cacheable, bufferable
+#endif
 		cmp	r1, r10			@ if virt > end of RAM
 		bichs	r1, r1, #0x0c		@ clear cacheable, bufferable
 		str	r1, [r0], #4		@ 1:1 mapping
@@ -484,6 +502,12 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
 		mov	pc, lr
 ENDPROC(__setup_mmu)
 
+__arm926ejs_mmu_cache_on:
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+		mov	r0, #4			@ put dcache in WT mode
+		mcr	p15, 7, r0, c15, c0, 0
+#endif
+
 __armv4_mmu_cache_on:
 		mov	r12, lr
 #ifdef CONFIG_MMU
@@ -665,6 +689,12 @@ proc_types:
 		W(b)	__armv4_mpu_cache_off
 		W(b)	__armv4_mpu_cache_flush
 
+		.word	0x41069260		@ ARM926EJ-S (v5TEJ)
+		.word	0xff0ffff0
+		b	__arm926ejs_mmu_cache_on
+		b	__armv4_mmu_cache_off
+		b	__armv5tej_mmu_cache_flush
+
 		.word	0x00007000		@ ARM7 IDs
 		.word	0x0000f000
 		mov	pc, lr
@@ -747,12 +777,6 @@ proc_types:
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv6_mmu_cache_flush
 
-		.word	0x560f5810		@ Marvell PJ4 ARMv6
-		.word	0xff0ffff0
-		W(b)	__armv4_mmu_cache_on
-		W(b)	__armv4_mmu_cache_off
-		W(b)	__armv6_mmu_cache_flush
-
 		.word	0x000f0000		@ new CPU Id
 		.word	0x000f0000
 		W(b)	__armv7_mmu_cache_on
@@ -1078,5 +1102,5 @@ reloc_code_end:
 
 		.align
 		.section ".stack", "aw", %nobits
-user_stack:	.space	4096
-user_stack_end:
+.L_user_stack:	.space	4096
+.L_user_stack_end:

arch/arm/boot/compressed/misc.c

@@ -26,8 +26,6 @@ unsigned int __machine_arch_type;
 #include <linux/linkage.h>
 #include <asm/string.h>
 
-#include <asm/unaligned.h>
-
 
 static void putstr(const char *ptr);
 extern void error(char *x);
@@ -139,13 +137,12 @@ void *memcpy(void *__dest, __const void *__src, size_t __n)
 }
 
 /*
- * gzip delarations
+ * gzip declarations
  */
 extern char input_data[];
 extern char input_data_end[];
 
 unsigned char *output_data;
-unsigned long output_ptr;
 
 unsigned long free_mem_ptr;
 unsigned long free_mem_end_ptr;
@@ -170,15 +167,15 @@ asmlinkage void __div0(void)
 	error("Attempting division by 0!");
 }
 
-extern void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
+extern int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
 
 
-unsigned long
+void
 decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 		unsigned long free_mem_ptr_end_p,
 		int arch_id)
 {
-	unsigned char *tmp;
+	int ret;
 
 	output_data		= (unsigned char *)output_start;
 	free_mem_ptr		= free_mem_ptr_p;
@@ -187,12 +184,11 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 
 	arch_decomp_setup();
 
-	tmp = (unsigned char *) (((unsigned long)input_data_end) - 4);
-	output_ptr = get_unaligned_le32(tmp);
-
 	putstr("Uncompressing Linux...");
-	do_decompress(input_data, input_data_end - input_data,
-			output_data, error);
-	putstr(" done, booting the kernel.\n");
-	return output_ptr;
+	ret = do_decompress(input_data, input_data_end - input_data,
+			    output_data, error);
+	if (ret)
+		error("decompressor returned an error");
+	else
+		putstr(" done, booting the kernel.\n");
 }

arch/arm/common/gic.c

@@ -49,7 +49,7 @@ struct gic_chip_data {
  * Default make them NULL.
  */
 struct irq_chip gic_arch_extn = {
-	.irq_ack	= NULL,
+	.irq_eoi	= NULL,
 	.irq_mask	= NULL,
 	.irq_unmask	= NULL,
 	.irq_retrigger	= NULL,
@@ -84,21 +84,12 @@ static inline unsigned int gic_irq(struct irq_data *d)
 /*
  * Routines to acknowledge, disable and enable interrupts
  */
-static void gic_ack_irq(struct irq_data *d)
-{
-	spin_lock(&irq_controller_lock);
-	if (gic_arch_extn.irq_ack)
-		gic_arch_extn.irq_ack(d);
-	writel(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI);
-	spin_unlock(&irq_controller_lock);
-}
-
 static void gic_mask_irq(struct irq_data *d)
 {
 	u32 mask = 1 << (d->irq % 32);
 
 	spin_lock(&irq_controller_lock);
-	writel(mask, gic_dist_base(d) + GIC_DIST_ENABLE_CLEAR + (gic_irq(d) / 32) * 4);
+	writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_CLEAR + (gic_irq(d) / 32) * 4);
 	if (gic_arch_extn.irq_mask)
 		gic_arch_extn.irq_mask(d);
 	spin_unlock(&irq_controller_lock);
@@ -111,10 +102,21 @@ static void gic_unmask_irq(struct irq_data *d)
 	spin_lock(&irq_controller_lock);
 	if (gic_arch_extn.irq_unmask)
 		gic_arch_extn.irq_unmask(d);
-	writel(mask, gic_dist_base(d) + GIC_DIST_ENABLE_SET + (gic_irq(d) / 32) * 4);
+	writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_SET + (gic_irq(d) / 32) * 4);
 	spin_unlock(&irq_controller_lock);
 }
 
+static void gic_eoi_irq(struct irq_data *d)
+{
+	if (gic_arch_extn.irq_eoi) {
+		spin_lock(&irq_controller_lock);
+		gic_arch_extn.irq_eoi(d);
+		spin_unlock(&irq_controller_lock);
+	}
+
+	writel_relaxed(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI);
+}
+
 static int gic_set_type(struct irq_data *d, unsigned int type)
 {
 	void __iomem *base = gic_dist_base(d);
@@ -138,7 +140,7 @@ static int gic_set_type(struct irq_data *d, unsigned int type)
 	if (gic_arch_extn.irq_set_type)
 		gic_arch_extn.irq_set_type(d, type);
 
-	val = readl(base + GIC_DIST_CONFIG + confoff);
+	val = readl_relaxed(base + GIC_DIST_CONFIG + confoff);
 	if (type == IRQ_TYPE_LEVEL_HIGH)
 		val &= ~confmask;
 	else if (type == IRQ_TYPE_EDGE_RISING)
@@ -148,15 +150,15 @@ static int gic_set_type(struct irq_data *d, unsigned int type)
 	 * As recommended by the spec, disable the interrupt before changing
 	 * the configuration
 	 */
-	if (readl(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
-		writel(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
+	if (readl_relaxed(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
+		writel_relaxed(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
 		enabled = true;
 	}
 
-	writel(val, base + GIC_DIST_CONFIG + confoff);
+	writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);
 
 	if (enabled)
-		writel(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
+		writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
 
 	spin_unlock(&irq_controller_lock);
 
@@ -188,8 +190,8 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
 
 	spin_lock(&irq_controller_lock);
 	d->node = cpu;
-	val = readl(reg) & ~mask;
-	writel(val | bit, reg);
+	val = readl_relaxed(reg) & ~mask;
+	writel_relaxed(val | bit, reg);
 	spin_unlock(&irq_controller_lock);
 
 	return 0;
@@ -218,11 +220,10 @@ static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
 	unsigned int cascade_irq, gic_irq;
 	unsigned long status;
 
-	/* primary controller ack'ing */
-	chip->irq_ack(&desc->irq_data);
+	chained_irq_enter(chip, desc);
 
 	spin_lock(&irq_controller_lock);
-	status = readl(chip_data->cpu_base + GIC_CPU_INTACK);
+	status = readl_relaxed(chip_data->cpu_base + GIC_CPU_INTACK);
 	spin_unlock(&irq_controller_lock);
 
 	gic_irq = (status & 0x3ff);
@@ -236,15 +237,14 @@ static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
 		generic_handle_irq(cascade_irq);
 
  out:
-	/* primary controller unmasking */
-	chip->irq_unmask(&desc->irq_data);
+	chained_irq_exit(chip, desc);
 }
 
 static struct irq_chip gic_chip = {
 	.name			= "GIC",
-	.irq_ack		= gic_ack_irq,
 	.irq_mask		= gic_mask_irq,
 	.irq_unmask		= gic_unmask_irq,
+	.irq_eoi		= gic_eoi_irq,
 	.irq_set_type		= gic_set_type,
 	.irq_retrigger		= gic_retrigger,
 #ifdef CONFIG_SMP
@@ -272,13 +272,13 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
 	cpumask |= cpumask << 8;
 	cpumask |= cpumask << 16;
 
-	writel(0, base + GIC_DIST_CTRL);
+	writel_relaxed(0, base + GIC_DIST_CTRL);
 
 	/*
 	 * Find out how many interrupts are supported.
 	 * The GIC only supports up to 1020 interrupt sources.
 	 */
-	gic_irqs = readl(base + GIC_DIST_CTR) & 0x1f;
+	gic_irqs = readl_relaxed(base + GIC_DIST_CTR) & 0x1f;
 	gic_irqs = (gic_irqs + 1) * 32;
 	if (gic_irqs > 1020)
 		gic_irqs = 1020;
@@ -287,26 +287,26 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
 	 * Set all global interrupts to be level triggered, active low.
 	 */
 	for (i = 32; i < gic_irqs; i += 16)
-		writel(0, base + GIC_DIST_CONFIG + i * 4 / 16);
+		writel_relaxed(0, base + GIC_DIST_CONFIG + i * 4 / 16);
 
 	/*
 	 * Set all global interrupts to this CPU only.
 	 */
 	for (i = 32; i < gic_irqs; i += 4)
-		writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
+		writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
 
 	/*
 	 * Set priority on all global interrupts.
 	 */
 	for (i = 32; i < gic_irqs; i += 4)
-		writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
+		writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
 
 	/*
 	 * Disable all interrupts.  Leave the PPI and SGIs alone
 	 * as these enables are banked registers.
 	 */
 	for (i = 32; i < gic_irqs; i += 32)
-		writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
+		writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
 
 	/*
 	 * Limit number of interrupts registered to the platform maximum
@@ -319,12 +319,12 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
 	 * Setup the Linux IRQ subsystem.
 	 */
 	for (i = irq_start; i < irq_limit; i++) {
-		irq_set_chip_and_handler(i, &gic_chip, handle_level_irq);
+		irq_set_chip_and_handler(i, &gic_chip, handle_fasteoi_irq);
 		irq_set_chip_data(i, gic);
 		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 	}
 
-	writel(1, base + GIC_DIST_CTRL);
+	writel_relaxed(1, base + GIC_DIST_CTRL);
 }
 
 static void __cpuinit gic_cpu_init(struct gic_chip_data *gic)
@@ -337,17 +337,17 @@ static void __cpuinit gic_cpu_init(struct gic_chip_data *gic)
 	 * Deal with the banked PPI and SGI interrupts - disable all
 	 * PPI interrupts, ensure all SGI interrupts are enabled.
 	 */
-	writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
-	writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
+	writel_relaxed(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
+	writel_relaxed(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
 
 	/*
 	 * Set priority on PPI and SGI interrupts
 	 */
 	for (i = 0; i < 32; i += 4)
-		writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
+		writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
 
-	writel(0xf0, base + GIC_CPU_PRIMASK);
-	writel(1, base + GIC_CPU_CTRL);
+	writel_relaxed(0xf0, base + GIC_CPU_PRIMASK);
+	writel_relaxed(1, base + GIC_CPU_CTRL);
 }
 
 void __init gic_init(unsigned int gic_nr, unsigned int irq_start,
@@ -391,7 +391,13 @@ void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
 {
 	unsigned long map = *cpus_addr(*mask);
 
+	/*
+	 * Ensure that stores to Normal memory are visible to the
+	 * other CPUs before issuing the IPI.
+	 */
+	dsb();
+
 	/* this always happens on GIC0 */
-	writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
+	writel_relaxed(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
 }
 #endif

arch/arm/common/sa1111.c

@@ -185,14 +185,6 @@ static struct sa1111_dev_info sa1111_devices[] = {
 	},
 };
 
-void __init sa1111_adjust_zones(unsigned long *size, unsigned long *holes)
-{
-	unsigned int sz = SZ_1M >> PAGE_SHIFT;
-
-	size[1] = size[0] - sz;
-	size[0] = sz;
-}
-
 /*
  * SA1111 interrupt support.  Since clearing an IRQ while there are
  * active IRQs causes the interrupt output to pulse, the upper levels

arch/arm/common/timer-sp.c

@@ -18,53 +18,67 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
+#include <linux/clk.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
+#include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 
 #include <asm/hardware/arm_timer.h>
 
-/*
- * These timers are currently always setup to be clocked at 1MHz.
- */
-#define TIMER_FREQ_KHZ	(1000)
-#define TIMER_RELOAD	(TIMER_FREQ_KHZ * 1000 / HZ)
+static long __init sp804_get_clock_rate(const char *name)
+{
+	struct clk *clk;
+	long rate;
+	int err;
+
+	clk = clk_get_sys("sp804", name);
+	if (IS_ERR(clk)) {
+		pr_err("sp804: %s clock not found: %d\n", name,
+			(int)PTR_ERR(clk));
+		return PTR_ERR(clk);
+	}
 
-static void __iomem *clksrc_base;
+	err = clk_enable(clk);
+	if (err) {
+		pr_err("sp804: %s clock failed to enable: %d\n", name, err);
+		clk_put(clk);
+		return err;
+	}
 
-static cycle_t sp804_read(struct clocksource *cs)
-{
-	return ~readl(clksrc_base + TIMER_VALUE);
-}
+	rate = clk_get_rate(clk);
+	if (rate < 0) {
+		pr_err("sp804: %s clock failed to get rate: %ld\n", name, rate);
+		clk_disable(clk);
+		clk_put(clk);
+	}
 
-static struct clocksource clocksource_sp804 = {
-	.name		= "timer3",
-	.rating		= 200,
-	.read		= sp804_read,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
+	return rate;
+}
 
-void __init sp804_clocksource_init(void __iomem *base)
+void __init sp804_clocksource_init(void __iomem *base, const char *name)
 {
-	struct clocksource *cs = &clocksource_sp804;
+	long rate = sp804_get_clock_rate(name);
 
-	clksrc_base = base;
+	if (rate < 0)
+		return;
 
 	/* setup timer 0 as free-running clocksource */
-	writel(0, clksrc_base + TIMER_CTRL);
-	writel(0xffffffff, clksrc_base + TIMER_LOAD);
-	writel(0xffffffff, clksrc_base + TIMER_VALUE);
+	writel(0, base + TIMER_CTRL);
+	writel(0xffffffff, base + TIMER_LOAD);
+	writel(0xffffffff, base + TIMER_VALUE);
 	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
-		clksrc_base + TIMER_CTRL);
+		base + TIMER_CTRL);
 
-	clocksource_register_khz(cs, TIMER_FREQ_KHZ);
+	clocksource_mmio_init(base + TIMER_VALUE, name,
+		rate, 200, 32, clocksource_mmio_readl_down);
 }
 
 
 static void __iomem *clkevt_base;
+static unsigned long clkevt_reload;
 
 /*
  * IRQ handler for the timer
@@ -90,7 +104,7 @@ static void sp804_set_mode(enum clock_event_mode mode,
 
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		writel(TIMER_RELOAD, clkevt_base + TIMER_LOAD);
+		writel(clkevt_reload, clkevt_base + TIMER_LOAD);
 		ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
 		break;
 
@@ -120,7 +134,6 @@ static int sp804_set_next_event(unsigned long next,
 }
 
 static struct clock_event_device sp804_clockevent = {
-	.name		= "timer0",
 	.shift		= 32,
 	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_mode	= sp804_set_mode,
@@ -136,17 +149,24 @@ static struct irqaction sp804_timer_irq = {
 	.dev_id		= &sp804_clockevent,
 };
 
-void __init sp804_clockevents_init(void __iomem *base, unsigned int timer_irq)
+void __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
+	const char *name)
 {
 	struct clock_event_device *evt = &sp804_clockevent;
+	long rate = sp804_get_clock_rate(name);
+
+	if (rate < 0)
+		return;
 
 	clkevt_base = base;
+	clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
 
-	evt->irq = timer_irq;
-	evt->mult = div_sc(TIMER_FREQ_KHZ, NSEC_PER_MSEC, evt->shift);
+	evt->name = name;
+	evt->irq = irq;
+	evt->mult = div_sc(rate, NSEC_PER_SEC, evt->shift);
 	evt->max_delta_ns = clockevent_delta2ns(0xffffffff, evt);
 	evt->min_delta_ns = clockevent_delta2ns(0xf, evt);
 
-	setup_irq(timer_irq, &sp804_timer_irq);
+	setup_irq(irq, &sp804_timer_irq);
 	clockevents_register_device(evt);
 }

arch/arm/configs/dove_defconfig

@@ -8,8 +8,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_DOVE=y
 CONFIG_MACH_DOVE_DB=y
-CONFIG_CPU_V6=y
-CONFIG_CPU_32v6K=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_AEABI=y
@@ -44,7 +42,6 @@ CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
-# CONFIG_MISC_DEVICES is not set
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
@@ -59,12 +56,12 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -72,12 +69,10 @@ CONFIG_I2C_MV64XXX=y
 CONFIG_SPI=y
 CONFIG_SPI_ORION=y
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
 CONFIG_USB_STORAGE=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_MV=y
@@ -86,7 +81,6 @@ CONFIG_MV_XOR=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_UDF_FS=m
@@ -110,23 +104,19 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_TEA=y
 CONFIG_CRYPTO_TWOFISH=y
 CONFIG_CRYPTO_DEFLATE=y

arch/arm/configs/mx1_defconfig

@@ -15,6 +15,7 @@ CONFIG_ARCH_MXC=y
 CONFIG_ARCH_MX1=y
 CONFIG_ARCH_MX1ADS=y
 CONFIG_MACH_SCB9328=y
+CONFIG_MACH_APF9328=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y

arch/arm/configs/mx51_defconfig

@@ -13,7 +13,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX5=y
+CONFIG_ARCH_MX51=y
 CONFIG_MACH_MX51_BABBAGE=y
 CONFIG_MACH_MX51_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX51=y

arch/arm/configs/mxs_defconfig

@@ -0,0 +1,129 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_PERF_EVENTS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_BLK_DEV_INTEGRITY=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_MXS=y
+CONFIG_MACH_STMP378X_DEVB=y
+CONFIG_MACH_TX28=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_AEABI=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_FPE_NWFPE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_FLEXCAN=m
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_ENC28J60=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_TSC2007=m
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=m
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MXS=m
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=m
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_DISPLAY_SUPPORT=m
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_MXS=y
+CONFIG_RTC_CLASS=m
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_DMADEVICES=y
+CONFIG_MXS_DMA=y
+CONFIG_EXT3_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_FSCACHE=m
+CONFIG_FSCACHE_STATS=y
+CONFIG_CACHEFILES=m
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_TIMER_STATS=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_DEBUG_INFO=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC7=m

arch/arm/configs/ns9xxx_defconfig

@@ -1,56 +0,0 @@
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_NS9XXX=y
-CONFIG_MACH_CC9P9360DEV=y
-CONFIG_MACH_CC9P9360JS=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_MTD=m
-CONFIG_MTD_CONCAT=m
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_PHYSMAP=m
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=m
-CONFIG_I2C_GPIO=m
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_RTC_CLASS=m
-CONFIG_EXT2_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=m
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y

arch/arm/configs/realview-smp_defconfig

@@ -38,7 +38,7 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_MTD_PHYSMAP=y
 CONFIG_ARM_CHARLCD=y
 CONFIG_NETDEVICES=y
 CONFIG_SMSC_PHY=y

arch/arm/configs/realview_defconfig

@@ -37,7 +37,7 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_MTD_PHYSMAP=y
 CONFIG_ARM_CHARLCD=y
 CONFIG_NETDEVICES=y
 CONFIG_SMSC_PHY=y

arch/arm/configs/spear310_defconfig

@@ -1,52 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PLAT_SPEAR=y
-CONFIG_MACH_SPEAR310=y
-CONFIG_BINFMT_MISC=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=8192
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_PL061=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-CONFIG_TMPFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_CRC32 is not set

arch/arm/configs/spear320_defconfig

@@ -1,52 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PLAT_SPEAR=y
-CONFIG_MACH_SPEAR320=y
-CONFIG_BINFMT_MISC=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=8192
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_PL061=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-CONFIG_TMPFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_CRC32 is not set

arch/arm/configs/spear300_defconfig → arch/arm/configs/spear3xx_defconfig

@@ -7,6 +7,9 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_PLAT_SPEAR=y
+CONFIG_BOARD_SPEAR300_EVB=y
+CONFIG_BOARD_SPEAR310_EVB=y
+CONFIG_BOARD_SPEAR320_EVB=y
 CONFIG_BINFMT_MISC=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_RAM=y
@@ -24,7 +27,6 @@ CONFIG_MAX_RAW_DEVS=8192
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PL061=y
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_EXT2_FS=y

arch/arm/configs/spear600_defconfig → arch/arm/configs/spear6xx_defconfig

@@ -8,6 +8,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_PLAT_SPEAR=y
 CONFIG_ARCH_SPEAR6XX=y
+CONFIG_BOARD_SPEAR600_EVB=y
 CONFIG_BINFMT_MISC=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_RAM=y
@@ -22,7 +23,6 @@ CONFIG_MAX_RAW_DEVS=8192
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PL061=y
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_EXT2_FS=y

arch/arm/configs/stmp378x_defconfig

@@ -1,128 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-default"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_STMP3XXX=y
-CONFIG_ARCH_STMP378X=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_NET_SCHED=y
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=6144
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_INPUT_POLLDEV=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=m
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_OBJECTS_SELFTEST=y
-CONFIG_DEBUG_OBJECTS_FREE=y
-CONFIG_DEBUG_OBJECTS_TIMERS=y
-CONFIG_DEBUG_SLAB=y
-CONFIG_DEBUG_SLAB_LEAK=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_KOBJECT=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_BOOT_TRACER=y
-CONFIG_STACK_TRACER=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y

arch/arm/configs/stmp37xx_defconfig

@@ -1,108 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-default"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_STMP3XXX=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M lcd_panel=lms350 rdinit=/bin/sh ignore_loglevel"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_NET_SCHED=y
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=6144
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_INPUT_POLLDEV=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=m
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_BOOT_TRACER=y
-CONFIG_STACK_TRACER=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_DEBUG_LL=y
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y

arch/arm/configs/versatile_defconfig

@@ -32,7 +32,7 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
 CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_MTD_PHYSMAP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_EEPROM_LEGACY=m
 CONFIG_NETDEVICES=y

arch/arm/include/asm/dma.h

@@ -6,8 +6,10 @@
 /*
  * This is the maximum virtual address which can be DMA'd from.
  */
-#ifndef MAX_DMA_ADDRESS
+#ifndef ARM_DMA_ZONE_SIZE
 #define MAX_DMA_ADDRESS	0xffffffff
+#else
+#define MAX_DMA_ADDRESS	(PAGE_OFFSET + ARM_DMA_ZONE_SIZE)
 #endif
 
 #ifdef CONFIG_ISA_DMA_API

arch/arm/include/asm/elf.h

@@ -108,6 +108,7 @@ struct task_struct;
 int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
 #define ELF_CORE_COPY_TASK_REGS dump_task_regs
 
+#define CORE_DUMP_USE_REGSET
 #define ELF_EXEC_PAGESIZE	4096
 
 /* This is the location that an ET_DYN program is loaded if exec'ed.  Typical

arch/arm/include/asm/futex.h

@@ -3,16 +3,74 @@
 
 #ifdef __KERNEL__
 
+#if defined(CONFIG_CPU_USE_DOMAINS) && defined(CONFIG_SMP)
+/* ARM doesn't provide unprivileged exclusive memory accessors */
+#include <asm-generic/futex.h>
+#else
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+
+#define __futex_atomic_ex_table(err_reg)			\
+	"3:\n"							\
+	"	.pushsection __ex_table,\"a\"\n"		\
+	"	.align	3\n"					\
+	"	.long	1b, 4f, 2b, 4f\n"			\
+	"	.popsection\n"					\
+	"	.pushsection .fixup,\"ax\"\n"			\
+	"4:	mov	%0, " err_reg "\n"			\
+	"	b	3b\n"					\
+	"	.popsection"
+
 #ifdef CONFIG_SMP
 
-#include <asm-generic/futex.h>
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
+	smp_mb();						\
+	__asm__ __volatile__(					\
+	"1:	ldrex	%1, [%2]\n"				\
+	"	" insn "\n"					\
+	"2:	strex	%1, %0, [%2]\n"				\
+	"	teq	%1, #0\n"				\
+	"	bne	1b\n"					\
+	"	mov	%0, #0\n"				\
+	__futex_atomic_ex_table("%4")				\
+	: "=&r" (ret), "=&r" (oldval)				\
+	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
+	: "cc", "memory")
+
+static inline int
+futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
+			      u32 oldval, u32 newval)
+{
+	int ret;
+	u32 val;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
+		return -EFAULT;
+
+	smp_mb();
+	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
+	"1:	ldrex	%1, [%4]\n"
+	"	teq	%1, %2\n"
+	"	ite	eq	@ explicit IT needed for the 2b label\n"
+	"2:	strexeq	%0, %3, [%4]\n"
+	"	movne	%0, #0\n"
+	"	teq	%0, #0\n"
+	"	bne	1b\n"
+	__futex_atomic_ex_table("%5")
+	: "=&r" (ret), "=&r" (val)
+	: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
+	: "cc", "memory");
+	smp_mb();
+
+	*uval = val;
+	return ret;
+}
 
 #else /* !SMP, we can work around lack of atomic ops by disabling preemption */
 
-#include <linux/futex.h>
 #include <linux/preempt.h>
-#include <linux/uaccess.h>
-#include <asm/errno.h>
 #include <asm/domain.h>
 
 #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
@@ -21,19 +79,37 @@
 	"	" insn "\n"					\
 	"2:	" T(str) "	%0, [%2]\n"			\
 	"	mov	%0, #0\n"				\
-	"3:\n"							\
-	"	.pushsection __ex_table,\"a\"\n"		\
-	"	.align	3\n"					\
-	"	.long	1b, 4f, 2b, 4f\n"			\
-	"	.popsection\n"					\
-	"	.pushsection .fixup,\"ax\"\n"			\
-	"4:	mov	%0, %4\n"				\
-	"	b	3b\n"					\
-	"	.popsection"					\
+	__futex_atomic_ex_table("%4")				\
 	: "=&r" (ret), "=&r" (oldval)				\
 	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
 	: "cc", "memory")
 
+static inline int
+futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
+			      u32 oldval, u32 newval)
+{
+	int ret = 0;
+	u32 val;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
+		return -EFAULT;
+
+	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
+	"1:	" T(ldr) "	%1, [%4]\n"
+	"	teq	%1, %2\n"
+	"	it	eq	@ explicit IT needed for the 2b label\n"
+	"2:	" T(streq) "	%3, [%4]\n"
+	__futex_atomic_ex_table("%5")
+	: "+r" (ret), "=&r" (val)
+	: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
+	: "cc", "memory");
+
+	*uval = val;
+	return ret;
+}
+
+#endif /* !SMP */
+
 static inline int
 futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
 {
@@ -87,39 +163,6 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
 	return ret;
 }
 
-static inline int
-futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
-			      u32 oldval, u32 newval)
-{
-	int ret = 0;
-	u32 val;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
-		return -EFAULT;
-
-	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
-	"1:	" T(ldr) "	%1, [%4]\n"
-	"	teq	%1, %2\n"
-	"	it	eq	@ explicit IT needed for the 2b label\n"
-	"2:	" T(streq) "	%3, [%4]\n"
-	"3:\n"
-	"	.pushsection __ex_table,\"a\"\n"
-	"	.align	3\n"
-	"	.long	1b, 4f, 2b, 4f\n"
-	"	.popsection\n"
-	"	.pushsection .fixup,\"ax\"\n"
-	"4:	mov	%0, %5\n"
-	"	b	3b\n"
-	"	.popsection"
-	: "+r" (ret), "=&r" (val)
-	: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
-	: "cc", "memory");
-
-	*uval = val;
-	return ret;
-}
-
-#endif /* !SMP */
-
+#endif /* !(CPU_USE_DOMAINS && SMP) */
 #endif /* __KERNEL__ */
 #endif /* _ASM_ARM_FUTEX_H */

arch/arm/include/asm/hardware/timer-sp.h

@@ -1,2 +1,2 @@
-void sp804_clocksource_init(void __iomem *);
-void sp804_clockevents_init(void __iomem *, unsigned int);
+void sp804_clocksource_init(void __iomem *, const char *);
+void sp804_clockevents_init(void __iomem *, unsigned int, const char *);

arch/arm/include/asm/memory.h

@@ -209,14 +209,10 @@ static inline unsigned long __phys_to_virt(unsigned long x)
  * allocations.  This must be the smallest DMA mask in the system,
  * so a successful GFP_DMA allocation will always satisfy this.
  */
-#ifndef ISA_DMA_THRESHOLD
+#ifndef ARM_DMA_ZONE_SIZE
 #define ISA_DMA_THRESHOLD	(0xffffffffULL)
-#endif
-
-#ifndef arch_adjust_zones
-#define arch_adjust_zones(size,holes) do { } while (0)
-#elif !defined(CONFIG_ZONE_DMA)
-#error "custom arch_adjust_zones() requires CONFIG_ZONE_DMA"
+#else
+#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + ARM_DMA_ZONE_SIZE - 1)
 #endif
 
 /*

arch/arm/include/asm/ptrace.h

@@ -128,6 +128,12 @@ struct pt_regs {
 #define ARM_r0		uregs[0]
 #define ARM_ORIG_r0	uregs[17]
 
+/*
+ * The size of the user-visible VFP state as seen by PTRACE_GET/SETVFPREGS
+ * and core dumps.
+ */
+#define ARM_VFPREGS_SIZE ( 32 * 8 /*fpregs*/ + 4 /*fpscr*/ )
+
 #ifdef __KERNEL__
 
 #define user_mode(regs)	\

arch/arm/include/asm/sizes.h

@@ -16,44 +16,6 @@
 /*  Size definitions
  *  Copyright (C) ARM Limited 1998. All rights reserved.
  */
+#include <asm-generic/sizes.h>
 
-#ifndef __sizes_h
-#define __sizes_h                       1
-
-/* handy sizes */
-#define SZ_16				0x00000010
-#define SZ_32				0x00000020
-#define SZ_64				0x00000040
-#define SZ_128				0x00000080
-#define SZ_256				0x00000100
-#define SZ_512				0x00000200
-
-#define SZ_1K                           0x00000400
-#define SZ_2K                           0x00000800
-#define SZ_4K                           0x00001000
-#define SZ_8K                           0x00002000
-#define SZ_16K                          0x00004000
-#define SZ_32K                          0x00008000
-#define SZ_64K                          0x00010000
-#define SZ_128K                         0x00020000
-#define SZ_256K                         0x00040000
-#define SZ_512K                         0x00080000
-
-#define SZ_1M                           0x00100000
-#define SZ_2M                           0x00200000
-#define SZ_4M                           0x00400000
-#define SZ_8M                           0x00800000
-#define SZ_16M                          0x01000000
-#define SZ_32M                          0x02000000
-#define SZ_48M                          0x03000000
-#define SZ_64M                          0x04000000
-#define SZ_128M                         0x08000000
-#define SZ_256M                         0x10000000
-#define SZ_512M                         0x20000000
-
-#define SZ_1G                           0x40000000
-#define SZ_2G                           0x80000000
-
-#endif
-
-/*         END */
+#define SZ_48M	(SZ_32M + SZ_16M)

arch/arm/include/asm/smp.h

@@ -14,8 +14,6 @@
 #include <linux/cpumask.h>
 #include <linux/thread_info.h>
 
-#include <mach/smp.h>
-
 #ifndef CONFIG_SMP
 # error "<asm/smp.h> included in non-SMP build"
 #endif
@@ -47,9 +45,9 @@ extern void smp_init_cpus(void);
 
 
 /*
- * Raise an IPI cross call on CPUs in callmap.
+ * Provide a function to raise an IPI cross call on CPUs in callmap.
  */
-extern void smp_cross_call(const struct cpumask *mask, int ipi);
+extern void set_smp_cross_call(void (*)(const struct cpumask *, unsigned int));
 
 /*
  * Boot a secondary CPU, and assign it the specified idle task.

arch/arm/include/asm/spinlock.h

@@ -5,6 +5,8 @@
 #error SMP not supported on pre-ARMv6 CPUs
 #endif
 
+#include <asm/processor.h>
+
 /*
  * sev and wfe are ARMv6K extensions.  Uniprocessor ARMv6 may not have the K
  * extensions, so when running on UP, we have to patch these instructions away.

arch/arm/kernel/perf_event.c

@@ -560,11 +560,6 @@ static int armpmu_event_init(struct perf_event *event)
 	event->destroy = hw_perf_event_destroy;
 
 	if (!atomic_inc_not_zero(&active_events)) {
-		if (atomic_read(&active_events) > armpmu->num_events) {
-			atomic_dec(&active_events);
-			return -ENOSPC;
-		}
-
 		mutex_lock(&pmu_reserve_mutex);
 		if (atomic_read(&active_events) == 0) {
 			err = armpmu_reserve_hardware();

arch/arm/kernel/ptrace.c

@@ -21,6 +21,7 @@
 #include <linux/uaccess.h>
 #include <linux/perf_event.h>
 #include <linux/hw_breakpoint.h>
+#include <linux/regset.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -308,58 +309,6 @@ static int ptrace_write_user(struct task_struct *tsk, unsigned long off,
 	return put_user_reg(tsk, off >> 2, val);
 }
 
-/*
- * Get all user integer registers.
- */
-static int ptrace_getregs(struct task_struct *tsk, void __user *uregs)
-{
-	struct pt_regs *regs = task_pt_regs(tsk);
-
-	return copy_to_user(uregs, regs, sizeof(struct pt_regs)) ? -EFAULT : 0;
-}
-
-/*
- * Set all user integer registers.
- */
-static int ptrace_setregs(struct task_struct *tsk, void __user *uregs)
-{
-	struct pt_regs newregs;
-	int ret;
-
-	ret = -EFAULT;
-	if (copy_from_user(&newregs, uregs, sizeof(struct pt_regs)) == 0) {
-		struct pt_regs *regs = task_pt_regs(tsk);
-
-		ret = -EINVAL;
-		if (valid_user_regs(&newregs)) {
-			*regs = newregs;
-			ret = 0;
-		}
-	}
-
-	return ret;
-}
-
-/*
- * Get the child FPU state.
- */
-static int ptrace_getfpregs(struct task_struct *tsk, void __user *ufp)
-{
-	return copy_to_user(ufp, &task_thread_info(tsk)->fpstate,
-			    sizeof(struct user_fp)) ? -EFAULT : 0;
-}
-
-/*
- * Set the child FPU state.
- */
-static int ptrace_setfpregs(struct task_struct *tsk, void __user *ufp)
-{
-	struct thread_info *thread = task_thread_info(tsk);
-	thread->used_cp[1] = thread->used_cp[2] = 1;
-	return copy_from_user(&thread->fpstate, ufp,
-			      sizeof(struct user_fp)) ? -EFAULT : 0;
-}
-
 #ifdef CONFIG_IWMMXT
 
 /*
@@ -418,56 +367,6 @@ static int ptrace_setcrunchregs(struct task_struct *tsk, void __user *ufp)
 }
 #endif
 
-#ifdef CONFIG_VFP
-/*
- * Get the child VFP state.
- */
-static int ptrace_getvfpregs(struct task_struct *tsk, void __user *data)
-{
-	struct thread_info *thread = task_thread_info(tsk);
-	union vfp_state *vfp = &thread->vfpstate;
-	struct user_vfp __user *ufp = data;
-
-	vfp_sync_hwstate(thread);
-
-	/* copy the floating point registers */
-	if (copy_to_user(&ufp->fpregs, &vfp->hard.fpregs,
-			 sizeof(vfp->hard.fpregs)))
-		return -EFAULT;
-
-	/* copy the status and control register */
-	if (put_user(vfp->hard.fpscr, &ufp->fpscr))
-		return -EFAULT;
-
-	return 0;
-}
-
-/*
- * Set the child VFP state.
- */
-static int ptrace_setvfpregs(struct task_struct *tsk, void __user *data)
-{
-	struct thread_info *thread = task_thread_info(tsk);
-	union vfp_state *vfp = &thread->vfpstate;
-	struct user_vfp __user *ufp = data;
-
-	vfp_sync_hwstate(thread);
-
-	/* copy the floating point registers */
-	if (copy_from_user(&vfp->hard.fpregs, &ufp->fpregs,
-			   sizeof(vfp->hard.fpregs)))
-		return -EFAULT;
-
-	/* copy the status and control register */
-	if (get_user(vfp->hard.fpscr, &ufp->fpscr))
-		return -EFAULT;
-
-	vfp_flush_hwstate(thread);
-
-	return 0;
-}
-#endif
-
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 /*
  * Convert a virtual register number into an index for a thread_info
@@ -694,6 +593,219 @@ out:
 }
 #endif
 
+/* regset get/set implementations */
+
+static int gpr_get(struct task_struct *target,
+		   const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   void *kbuf, void __user *ubuf)
+{
+	struct pt_regs *regs = task_pt_regs(target);
+
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				   regs,
+				   0, sizeof(*regs));
+}
+
+static int gpr_set(struct task_struct *target,
+		   const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+	struct pt_regs newregs;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &newregs,
+				 0, sizeof(newregs));
+	if (ret)
+		return ret;
+
+	if (!valid_user_regs(&newregs))
+		return -EINVAL;
+
+	*task_pt_regs(target) = newregs;
+	return 0;
+}
+
+static int fpa_get(struct task_struct *target,
+		   const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   void *kbuf, void __user *ubuf)
+{
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				   &task_thread_info(target)->fpstate,
+				   0, sizeof(struct user_fp));
+}
+
+static int fpa_set(struct task_struct *target,
+		   const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   const void *kbuf, const void __user *ubuf)
+{
+	struct thread_info *thread = task_thread_info(target);
+
+	thread->used_cp[1] = thread->used_cp[2] = 1;
+
+	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+		&thread->fpstate,
+		0, sizeof(struct user_fp));
+}
+
+#ifdef CONFIG_VFP
+/*
+ * VFP register get/set implementations.
+ *
+ * With respect to the kernel, struct user_fp is divided into three chunks:
+ * 16 or 32 real VFP registers (d0-d15 or d0-31)
+ *	These are transferred to/from the real registers in the task's
+ *	vfp_hard_struct.  The number of registers depends on the kernel
+ *	configuration.
+ *
+ * 16 or 0 fake VFP registers (d16-d31 or empty)
+ *	i.e., the user_vfp structure has space for 32 registers even if
+ *	the kernel doesn't have them all.
+ *
+ *	vfp_get() reads this chunk as zero where applicable
+ *	vfp_set() ignores this chunk
+ *
+ * 1 word for the FPSCR
+ *
+ * The bounds-checking logic built into user_regset_copyout and friends
+ * means that we can make a simple sequence of calls to map the relevant data
+ * to/from the specified slice of the user regset structure.
+ */
+static int vfp_get(struct task_struct *target,
+		   const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   void *kbuf, void __user *ubuf)
+{
+	int ret;
+	struct thread_info *thread = task_thread_info(target);
+	struct vfp_hard_struct const *vfp = &thread->vfpstate.hard;
+	const size_t user_fpregs_offset = offsetof(struct user_vfp, fpregs);
+	const size_t user_fpscr_offset = offsetof(struct user_vfp, fpscr);
+
+	vfp_sync_hwstate(thread);
+
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  &vfp->fpregs,
+				  user_fpregs_offset,
+				  user_fpregs_offset + sizeof(vfp->fpregs));
+	if (ret)
+		return ret;
+
+	ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+				       user_fpregs_offset + sizeof(vfp->fpregs),
+				       user_fpscr_offset);
+	if (ret)
+		return ret;
+
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				   &vfp->fpscr,
+				   user_fpscr_offset,
+				   user_fpscr_offset + sizeof(vfp->fpscr));
+}
+
+/*
+ * For vfp_set() a read-modify-write is done on the VFP registers,
+ * in order to avoid writing back a half-modified set of registers on
+ * failure.
+ */
+static int vfp_set(struct task_struct *target,
+			  const struct user_regset *regset,
+			  unsigned int pos, unsigned int count,
+			  const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+	struct thread_info *thread = task_thread_info(target);
+	struct vfp_hard_struct new_vfp = thread->vfpstate.hard;
+	const size_t user_fpregs_offset = offsetof(struct user_vfp, fpregs);
+	const size_t user_fpscr_offset = offsetof(struct user_vfp, fpscr);
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				  &new_vfp.fpregs,
+				  user_fpregs_offset,
+				  user_fpregs_offset + sizeof(new_vfp.fpregs));
+	if (ret)
+		return ret;
+
+	ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+				user_fpregs_offset + sizeof(new_vfp.fpregs),
+				user_fpscr_offset);
+	if (ret)
+		return ret;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &new_vfp.fpscr,
+				 user_fpscr_offset,
+				 user_fpscr_offset + sizeof(new_vfp.fpscr));
+	if (ret)
+		return ret;
+
+	vfp_sync_hwstate(thread);
+	thread->vfpstate.hard = new_vfp;
+	vfp_flush_hwstate(thread);
+
+	return 0;
+}
+#endif /* CONFIG_VFP */
+
+enum arm_regset {
+	REGSET_GPR,
+	REGSET_FPR,
+#ifdef CONFIG_VFP
+	REGSET_VFP,
+#endif
+};
+
+static const struct user_regset arm_regsets[] = {
+	[REGSET_GPR] = {
+		.core_note_type = NT_PRSTATUS,
+		.n = ELF_NGREG,
+		.size = sizeof(u32),
+		.align = sizeof(u32),
+		.get = gpr_get,
+		.set = gpr_set
+	},
+	[REGSET_FPR] = {
+		/*
+		 * For the FPA regs in fpstate, the real fields are a mixture
+		 * of sizes, so pretend that the registers are word-sized:
+		 */
+		.core_note_type = NT_PRFPREG,
+		.n = sizeof(struct user_fp) / sizeof(u32),
+		.size = sizeof(u32),
+		.align = sizeof(u32),
+		.get = fpa_get,
+		.set = fpa_set
+	},
+#ifdef CONFIG_VFP
+	[REGSET_VFP] = {
+		/*
+		 * Pretend that the VFP regs are word-sized, since the FPSCR is
+		 * a single word dangling at the end of struct user_vfp:
+		 */
+		.core_note_type = NT_ARM_VFP,
+		.n = ARM_VFPREGS_SIZE / sizeof(u32),
+		.size = sizeof(u32),
+		.align = sizeof(u32),
+		.get = vfp_get,
+		.set = vfp_set
+	},
+#endif /* CONFIG_VFP */
+};
+
+static const struct user_regset_view user_arm_view = {
+	.name = "arm", .e_machine = ELF_ARCH, .ei_osabi = ELF_OSABI,
+	.regsets = arm_regsets, .n = ARRAY_SIZE(arm_regsets)
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+	return &user_arm_view;
+}
+
 long arch_ptrace(struct task_struct *child, long request,
 		 unsigned long addr, unsigned long data)
 {
@@ -710,19 +822,31 @@ long arch_ptrace(struct task_struct *child, long request,
 			break;
 
 		case PTRACE_GETREGS:
-			ret = ptrace_getregs(child, datap);
+			ret = copy_regset_to_user(child,
+						  &user_arm_view, REGSET_GPR,
+						  0, sizeof(struct pt_regs),
+						  datap);
 			break;
 
 		case PTRACE_SETREGS:
-			ret = ptrace_setregs(child, datap);
+			ret = copy_regset_from_user(child,
+						    &user_arm_view, REGSET_GPR,
+						    0, sizeof(struct pt_regs),
+						    datap);
 			break;
 
 		case PTRACE_GETFPREGS:
-			ret = ptrace_getfpregs(child, datap);
+			ret = copy_regset_to_user(child,
+						  &user_arm_view, REGSET_FPR,
+						  0, sizeof(union fp_state),
+						  datap);
 			break;
-		
+
 		case PTRACE_SETFPREGS:
-			ret = ptrace_setfpregs(child, datap);
+			ret = copy_regset_from_user(child,
+						    &user_arm_view, REGSET_FPR,
+						    0, sizeof(union fp_state),
+						    datap);
 			break;
 
 #ifdef CONFIG_IWMMXT
@@ -757,11 +881,17 @@ long arch_ptrace(struct task_struct *child, long request,
 
 #ifdef CONFIG_VFP
 		case PTRACE_GETVFPREGS:
-			ret = ptrace_getvfpregs(child, datap);
+			ret = copy_regset_to_user(child,
+						  &user_arm_view, REGSET_VFP,
+						  0, ARM_VFPREGS_SIZE,
+						  datap);
 			break;
 
 		case PTRACE_SETVFPREGS:
-			ret = ptrace_setvfpregs(child, datap);
+			ret = copy_regset_from_user(child,
+						    &user_arm_view, REGSET_VFP,
+						    0, ARM_VFPREGS_SIZE,
+						    datap);
 			break;
 #endif
 

arch/arm/kernel/setup.c

@@ -672,11 +672,16 @@ __tagtable(ATAG_REVISION, parse_tag_revision);
 
 static int __init parse_tag_cmdline(const struct tag *tag)
 {
-#ifndef CONFIG_CMDLINE_FORCE
-	strlcpy(default_command_line, tag->u.cmdline.cmdline, COMMAND_LINE_SIZE);
-#else
+#if defined(CONFIG_CMDLINE_EXTEND)
+	strlcat(default_command_line, " ", COMMAND_LINE_SIZE);
+	strlcat(default_command_line, tag->u.cmdline.cmdline,
+		COMMAND_LINE_SIZE);
+#elif defined(CONFIG_CMDLINE_FORCE)
 	pr_warning("Ignoring tag cmdline (using the default kernel command line)\n");
-#endif /* CONFIG_CMDLINE_FORCE */
+#else
+	strlcpy(default_command_line, tag->u.cmdline.cmdline,
+		COMMAND_LINE_SIZE);
+#endif
 	return 0;
 }
 

arch/arm/kernel/smp.c

@@ -376,6 +376,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	}
 }
 
+static void (*smp_cross_call)(const struct cpumask *, unsigned int);
+
+void __init set_smp_cross_call(void (*fn)(const struct cpumask *, unsigned int))
+{
+	smp_cross_call = fn;
+}
+
 void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 {
 	smp_cross_call(mask, IPI_CALL_FUNC);

arch/arm/mach-bcmring/arch.c

@@ -169,6 +169,7 @@ MACHINE_START(BCMRING, "BCMRING")
 	/* Maintainer: Broadcom Corporation */
 	.fixup = bcmring_fixup,
 	.map_io = bcmring_map_io,
+	.init_early = bcmring_init_early,
 	.init_irq = bcmring_init_irq,
 	.timer = &bcmring_timer,
 	.init_machine = bcmring_init_machine

arch/arm/mach-bcmring/core.c

@@ -28,8 +28,6 @@
 #include <linux/sysdev.h>
 #include <linux/interrupt.h>
 #include <linux/amba/bus.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
 #include <linux/clkdev.h>
 
 #include <mach/csp/mm_addr.h>
@@ -37,6 +35,7 @@
 #include <linux/io.h>
 #include <asm/irq.h>
 #include <asm/hardware/arm_timer.h>
+#include <asm/hardware/timer-sp.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/arch.h>
@@ -97,6 +96,35 @@ static struct clk dummy_apb_pclk = {
 	.mode = CLK_MODE_XTAL,
 };
 
+/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically  150-166 MHz */
+#if defined(CONFIG_ARCH_FPGA11107)
+/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */
+/* slow down Linux's sense of time */
+#define TIMER0_FREQUENCY_MHZ  (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER1_FREQUENCY_MHZ  (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_MHZ  (tmrHw_HIGH_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_KHZ   (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30)
+#else
+#define TIMER0_FREQUENCY_MHZ  tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER1_FREQUENCY_MHZ  tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_MHZ  tmrHw_HIGH_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_KHZ  (tmrHw_HIGH_FREQUENCY_HZ / 1000)
+#endif
+
+static struct clk sp804_timer012_clk = {
+	.name = "sp804-timer-0,1,2",
+	.type = CLK_TYPE_PRIMARY,
+	.mode = CLK_MODE_XTAL,
+	.rate_hz = TIMER1_FREQUENCY_MHZ * 1000000,
+};
+
+static struct clk sp804_timer3_clk = {
+	.name = "sp804-timer-3",
+	.type = CLK_TYPE_PRIMARY,
+	.mode = CLK_MODE_XTAL,
+	.rate_hz = TIMER3_FREQUENCY_KHZ * 1000,
+};
+
 static struct clk_lookup lookups[] = {
 	{			/* Bus clock */
 		.con_id = "apb_pclk",
@@ -107,6 +135,18 @@ static struct clk_lookup lookups[] = {
 	}, {			/* UART1 */
 		.dev_id = "uartb",
 		.clk = &uart_clk,
+	}, {			/* SP804 timer 0 */
+		.dev_id = "sp804",
+		.con_id = "timer0",
+		.clk = &sp804_timer012_clk,
+	}, {			/* SP804 timer 1 */
+		.dev_id = "sp804",
+		.con_id = "timer1",
+		.clk = &sp804_timer012_clk,
+	}, {			/* SP804 timer 3 */
+		.dev_id = "sp804",
+		.con_id = "timer3",
+		.clk = &sp804_timer3_clk,
 	}
 };
 
@@ -151,8 +191,6 @@ void __init bcmring_amba_init(void)
 
 	chipcHw_busInterfaceClockEnable(bus_clock);
 
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
 		amba_device_register(d, &iomem_resource);
@@ -162,170 +200,18 @@ void __init bcmring_amba_init(void)
 /*
  * Where is the timer (VA)?
  */
-#define TIMER0_VA_BASE		 MM_IO_BASE_TMR
-#define TIMER1_VA_BASE		(MM_IO_BASE_TMR + 0x20)
-#define TIMER2_VA_BASE		(MM_IO_BASE_TMR + 0x40)
-#define TIMER3_VA_BASE          (MM_IO_BASE_TMR + 0x60)
-
-/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically  150-166 MHz */
-#if defined(CONFIG_ARCH_FPGA11107)
-/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */
-/* slow down Linux's sense of time */
-#define TIMER0_FREQUENCY_MHZ  (tmrHw_LOW_FREQUENCY_MHZ * 30)
-#define TIMER1_FREQUENCY_MHZ  (tmrHw_LOW_FREQUENCY_MHZ * 30)
-#define TIMER3_FREQUENCY_MHZ  (tmrHw_HIGH_FREQUENCY_MHZ * 30)
-#define TIMER3_FREQUENCY_KHZ   (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30)
-#else
-#define TIMER0_FREQUENCY_MHZ  tmrHw_LOW_FREQUENCY_MHZ
-#define TIMER1_FREQUENCY_MHZ  tmrHw_LOW_FREQUENCY_MHZ
-#define TIMER3_FREQUENCY_MHZ  tmrHw_HIGH_FREQUENCY_MHZ
-#define TIMER3_FREQUENCY_KHZ  (tmrHw_HIGH_FREQUENCY_HZ / 1000)
-#endif
-
-#define TICKS_PER_uSEC     TIMER0_FREQUENCY_MHZ
-
-/*
- *  These are useconds NOT ticks.
- *
- */
-#define mSEC_1                          1000
-#define mSEC_5                          (mSEC_1 * 5)
-#define mSEC_10                         (mSEC_1 * 10)
-#define mSEC_25                         (mSEC_1 * 25)
-#define SEC_1                           (mSEC_1 * 1000)
-
-/*
- * How long is the timer interval?
- */
-#define TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_10)
-#if TIMER_INTERVAL >= 0x100000
-#define TIMER_RELOAD	(TIMER_INTERVAL >> 8)
-#define TIMER_DIVISOR	(TIMER_CTRL_DIV256)
-#define TICKS2USECS(x)	(256 * (x) / TICKS_PER_uSEC)
-#elif TIMER_INTERVAL >= 0x10000
-#define TIMER_RELOAD	(TIMER_INTERVAL >> 4)	/* Divide by 16 */
-#define TIMER_DIVISOR	(TIMER_CTRL_DIV16)
-#define TICKS2USECS(x)	(16 * (x) / TICKS_PER_uSEC)
-#else
-#define TIMER_RELOAD	(TIMER_INTERVAL)
-#define TIMER_DIVISOR	(TIMER_CTRL_DIV1)
-#define TICKS2USECS(x)	((x) / TICKS_PER_uSEC)
-#endif
-
-static void timer_set_mode(enum clock_event_mode mode,
-			   struct clock_event_device *clk)
-{
-	unsigned long ctrl;
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
-
-		ctrl = TIMER_CTRL_PERIODIC;
-		ctrl |=
-		    TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE |
-		    TIMER_CTRL_ENABLE;
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* period set, and timer enabled in 'next_event' hook */
-		ctrl = TIMER_CTRL_ONESHOT;
-		ctrl |= TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE;
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		ctrl = 0;
-	}
-
-	writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL);
-}
-
-static int timer_set_next_event(unsigned long evt,
-				struct clock_event_device *unused)
-{
-	unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL);
-
-	writel(evt, TIMER0_VA_BASE + TIMER_LOAD);
-	writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL);
-
-	return 0;
-}
-
-static struct clock_event_device timer0_clockevent = {
-	.name = "timer0",
-	.shift = 32,
-	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode = timer_set_mode,
-	.set_next_event = timer_set_next_event,
-};
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t bcmring_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &timer0_clockevent;
-
-	writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction bcmring_timer_irq = {
-	.name = "bcmring Timer Tick",
-	.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler = bcmring_timer_interrupt,
-};
-
-static cycle_t bcmring_get_cycles_timer1(struct clocksource *cs)
-{
-	return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
-}
-
-static cycle_t bcmring_get_cycles_timer3(struct clocksource *cs)
-{
-	return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
-}
-
-static struct clocksource clocksource_bcmring_timer1 = {
-	.name = "timer1",
-	.rating = 200,
-	.read = bcmring_get_cycles_timer1,
-	.mask = CLOCKSOURCE_MASK(32),
-	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static struct clocksource clocksource_bcmring_timer3 = {
-	.name = "timer3",
-	.rating = 100,
-	.read = bcmring_get_cycles_timer3,
-	.mask = CLOCKSOURCE_MASK(32),
-	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
+#define TIMER0_VA_BASE		((void __iomem *)MM_IO_BASE_TMR)
+#define TIMER1_VA_BASE		((void __iomem *)(MM_IO_BASE_TMR + 0x20))
+#define TIMER2_VA_BASE		((void __iomem *)(MM_IO_BASE_TMR + 0x40))
+#define TIMER3_VA_BASE          ((void __iomem *)(MM_IO_BASE_TMR + 0x60))
 
 static int __init bcmring_clocksource_init(void)
 {
 	/* setup timer1 as free-running clocksource */
-	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
-	writel(0xffffffff, TIMER1_VA_BASE + TIMER_LOAD);
-	writel(0xffffffff, TIMER1_VA_BASE + TIMER_VALUE);
-	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
-	       TIMER1_VA_BASE + TIMER_CTRL);
-
-	clocksource_register_khz(&clocksource_bcmring_timer1,
-				 TIMER1_FREQUENCY_MHZ * 1000);
+	sp804_clocksource_init(TIMER1_VA_BASE, "timer1");
 
 	/* setup timer3 as free-running clocksource */
-	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
-	writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD);
-	writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE);
-	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
-	       TIMER3_VA_BASE + TIMER_CTRL);
-
-	clocksource_register_khz(&clocksource_bcmring_timer3,
-				 TIMER3_FREQUENCY_KHZ);
+	sp804_clocksource_init(TIMER3_VA_BASE, "timer3");
 
 	return 0;
 }
@@ -347,21 +233,16 @@ void __init bcmring_init_timer(void)
 	/*
 	 * Make irqs happen for the system timer
 	 */
-	setup_irq(IRQ_TIMER0, &bcmring_timer_irq);
-
 	bcmring_clocksource_init();
 
-	timer0_clockevent.mult =
-	    div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
-	timer0_clockevent.max_delta_ns =
-	    clockevent_delta2ns(0xffffffff, &timer0_clockevent);
-	timer0_clockevent.min_delta_ns =
-	    clockevent_delta2ns(0xf, &timer0_clockevent);
-
-	timer0_clockevent.cpumask = cpumask_of(0);
-	clockevents_register_device(&timer0_clockevent);
+	sp804_clockevents_register(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
 }
 
 struct sys_timer bcmring_timer = {
 	.init = bcmring_init_timer,
 };
+
+void __init bcmring_init_early(void)
+{
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+}

arch/arm/mach-bcmring/core.h

@@ -25,6 +25,7 @@
 void __init bcmring_amba_init(void);
 void __init bcmring_map_io(void);
 void __init bcmring_init_irq(void);
+void __init bcmring_init_early(void);
 
 extern struct sys_timer bcmring_timer;
 #endif

arch/arm/mach-davinci/include/mach/memory.h

@@ -41,27 +41,11 @@
  */
 #define CONSISTENT_DMA_SIZE (14<<20)
 
-#ifndef __ASSEMBLY__
 /*
  * Restrict DMA-able region to workaround silicon bug.  The bug
  * restricts buffers available for DMA to video hardware to be
  * below 128M
  */
-static inline void
-__arch_adjust_zones(unsigned long *size, unsigned long *holes)
-{
-	unsigned int sz = (128<<20) >> PAGE_SHIFT;
-
-	size[1] = size[0] - sz;
-	size[0] = sz;
-}
-
-#define arch_adjust_zones(zone_size, holes) \
-        if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(zone_size, holes)
-
-#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + (128<<20) - 1)
-#define MAX_DMA_ADDRESS		(PAGE_OFFSET + (128<<20))
-
-#endif
+#define ARM_DMA_ZONE_SIZE	SZ_128M
 
 #endif /* __ASM_ARCH_MEMORY_H */

arch/arm/mach-davinci/include/mach/uncompress.h

@@ -25,8 +25,7 @@
 
 #include <mach/serial.h>
 
-static u32 *uart;
-static u32 *uart_info = (u32 *)(DAVINCI_UART_INFO);
+u32 *uart;
 
 /* PORT_16C550A, in polled non-fifo mode */
 static void putc(char c)
@@ -44,6 +43,8 @@ static inline void flush(void)
 
 static inline void set_uart_info(u32 phys, void * __iomem virt)
 {
+	u32 *uart_info = (u32 *)(DAVINCI_UART_INFO);
+
 	uart = (u32 *)phys;
 	uart_info[0] = phys;
 	uart_info[1] = (u32)virt;

arch/arm/mach-davinci/irq.c

@@ -29,8 +29,6 @@
 #include <mach/common.h>
 #include <asm/mach/irq.h>
 
-#define IRQ_BIT(irq)		((irq) & 0x1f)
-
 #define FIQ_REG0_OFFSET		0x0000
 #define FIQ_REG1_OFFSET		0x0004
 #define IRQ_REG0_OFFSET		0x0008
@@ -42,78 +40,33 @@
 #define IRQ_INTPRI0_REG_OFFSET	0x0030
 #define IRQ_INTPRI7_REG_OFFSET	0x004C
 
-static inline unsigned int davinci_irq_readl(int offset)
-{
-	return __raw_readl(davinci_intc_base + offset);
-}
-
 static inline void davinci_irq_writel(unsigned long value, int offset)
 {
 	__raw_writel(value, davinci_intc_base + offset);
 }
 
-/* Disable interrupt */
-static void davinci_mask_irq(struct irq_data *d)
+static __init void
+davinci_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
 {
-	unsigned int mask;
-	u32 l;
-
-	mask = 1 << IRQ_BIT(d->irq);
-
-	if (d->irq > 31) {
-		l = davinci_irq_readl(IRQ_ENT_REG1_OFFSET);
-		l &= ~mask;
-		davinci_irq_writel(l, IRQ_ENT_REG1_OFFSET);
-	} else {
-		l = davinci_irq_readl(IRQ_ENT_REG0_OFFSET);
-		l &= ~mask;
-		davinci_irq_writel(l, IRQ_ENT_REG0_OFFSET);
-	}
-}
-
-/* Enable interrupt */
-static void davinci_unmask_irq(struct irq_data *d)
-{
-	unsigned int mask;
-	u32 l;
-
-	mask = 1 << IRQ_BIT(d->irq);
-
-	if (d->irq > 31) {
-		l = davinci_irq_readl(IRQ_ENT_REG1_OFFSET);
-		l |= mask;
-		davinci_irq_writel(l, IRQ_ENT_REG1_OFFSET);
-	} else {
-		l = davinci_irq_readl(IRQ_ENT_REG0_OFFSET);
-		l |= mask;
-		davinci_irq_writel(l, IRQ_ENT_REG0_OFFSET);
-	}
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+
+	gc = irq_alloc_generic_chip("AINTC", 1, irq_start, base, handle_edge_irq);
+	ct = gc->chip_types;
+	ct->chip.irq_ack = irq_gc_ack;
+	ct->chip.irq_mask = irq_gc_mask_clr_bit;
+	ct->chip.irq_unmask = irq_gc_mask_set_bit;
+
+	ct->regs.ack = IRQ_REG0_OFFSET;
+	ct->regs.mask = IRQ_ENT_REG0_OFFSET;
+	irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
+			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
 }
 
-/* EOI interrupt */
-static void davinci_ack_irq(struct irq_data *d)
-{
-	unsigned int mask;
-
-	mask = 1 << IRQ_BIT(d->irq);
-
-	if (d->irq > 31)
-		davinci_irq_writel(mask, IRQ_REG1_OFFSET);
-	else
-		davinci_irq_writel(mask, IRQ_REG0_OFFSET);
-}
-
-static struct irq_chip davinci_irq_chip_0 = {
-	.name		= "AINTC",
-	.irq_ack	= davinci_ack_irq,
-	.irq_mask	= davinci_mask_irq,
-	.irq_unmask	= davinci_unmask_irq,
-};
-
 /* ARM Interrupt Controller Initialization */
 void __init davinci_irq_init(void)
 {
-	unsigned i;
+	unsigned i, j;
 	const u8 *davinci_def_priorities = davinci_soc_info.intc_irq_prios;
 
 	davinci_intc_type = DAVINCI_INTC_TYPE_AINTC;
@@ -144,7 +97,6 @@ void __init davinci_irq_init(void)
 	davinci_irq_writel(~0x0, IRQ_REG1_OFFSET);
 
 	for (i = IRQ_INTPRI0_REG_OFFSET; i <= IRQ_INTPRI7_REG_OFFSET; i += 4) {
-		unsigned	j;
 		u32		pri;
 
 		for (j = 0, pri = 0; j < 32; j += 4, davinci_def_priorities++)
@@ -152,13 +104,8 @@ void __init davinci_irq_init(void)
 		davinci_irq_writel(pri, i);
 	}
 
-	/* set up genirq dispatch for ARM INTC */
-	for (i = 0; i < davinci_soc_info.intc_irq_num; i++) {
-		irq_set_chip(i, &davinci_irq_chip_0);
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-		if (i != IRQ_TINT1_TINT34)
-			irq_set_handler(i, handle_edge_irq);
-		else
-			irq_set_handler(i, handle_level_irq);
-	}
+	for (i = 0, j = 0; i < davinci_soc_info.intc_irq_num; i += 32, j += 0x04)
+		davinci_alloc_gc(davinci_intc_base + j, i, 32);
+
+	irq_set_handler(IRQ_TINT1_TINT34, handle_level_irq);
 }

arch/arm/mach-dove/common.c

@@ -16,10 +16,8 @@
 #include <linux/serial_8250.h>
 #include <linux/clk.h>
 #include <linux/mbus.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/mv643xx_i2c.h>
 #include <linux/ata_platform.h>
-#include <linux/spi/orion_spi.h>
+#include <linux/serial_8250.h>
 #include <linux/gpio.h>
 #include <asm/page.h>
 #include <asm/setup.h>
@@ -32,11 +30,12 @@
 #include <mach/bridge-regs.h>
 #include <asm/mach/arch.h>
 #include <linux/irq.h>
-#include <plat/mv_xor.h>
-#include <plat/ehci-orion.h>
 #include <plat/time.h>
+#include <plat/common.h>
 #include "common.h"
 
+static int get_tclk(void);
+
 /*****************************************************************************
  * I/O Address Mapping
  ****************************************************************************/
@@ -69,464 +68,107 @@ void __init dove_map_io(void)
 	iotable_init(dove_io_desc, ARRAY_SIZE(dove_io_desc));
 }
 
-/*****************************************************************************
- * EHCI
- ****************************************************************************/
-static struct orion_ehci_data dove_ehci_data = {
-	.dram		= &dove_mbus_dram_info,
-	.phy_version	= EHCI_PHY_NA,
-};
-
-static u64 ehci_dmamask = DMA_BIT_MASK(32);
-
 /*****************************************************************************
  * EHCI0
  ****************************************************************************/
-static struct resource dove_ehci0_resources[] = {
-	{
-		.start	= DOVE_USB0_PHYS_BASE,
-		.end	= DOVE_USB0_PHYS_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_DOVE_USB0,
-		.end	= IRQ_DOVE_USB0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dove_ehci0 = {
-	.name		= "orion-ehci",
-	.id		= 0,
-	.dev		= {
-		.dma_mask		= &ehci_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &dove_ehci_data,
-	},
-	.resource	= dove_ehci0_resources,
-	.num_resources	= ARRAY_SIZE(dove_ehci0_resources),
-};
-
 void __init dove_ehci0_init(void)
 {
-	platform_device_register(&dove_ehci0);
+	orion_ehci_init(&dove_mbus_dram_info,
+			DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0);
 }
 
 /*****************************************************************************
  * EHCI1
  ****************************************************************************/
-static struct resource dove_ehci1_resources[] = {
-	{
-		.start	= DOVE_USB1_PHYS_BASE,
-		.end	= DOVE_USB1_PHYS_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_DOVE_USB1,
-		.end	= IRQ_DOVE_USB1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dove_ehci1 = {
-	.name		= "orion-ehci",
-	.id		= 1,
-	.dev		= {
-		.dma_mask		= &ehci_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &dove_ehci_data,
-	},
-	.resource	= dove_ehci1_resources,
-	.num_resources	= ARRAY_SIZE(dove_ehci1_resources),
-};
-
 void __init dove_ehci1_init(void)
 {
-	platform_device_register(&dove_ehci1);
+	orion_ehci_1_init(&dove_mbus_dram_info,
+			  DOVE_USB1_PHYS_BASE, IRQ_DOVE_USB1);
 }
 
 /*****************************************************************************
  * GE00
  ****************************************************************************/
-struct mv643xx_eth_shared_platform_data dove_ge00_shared_data = {
-	.t_clk		= 0,
-	.dram		= &dove_mbus_dram_info,
-};
-
-static struct resource dove_ge00_shared_resources[] = {
-	{
-		.name	= "ge00 base",
-		.start	= DOVE_GE00_PHYS_BASE + 0x2000,
-		.end	= DOVE_GE00_PHYS_BASE + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dove_ge00_shared = {
-	.name		= MV643XX_ETH_SHARED_NAME,
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &dove_ge00_shared_data,
-	},
-	.num_resources	= 1,
-	.resource	= dove_ge00_shared_resources,
-};
-
-static struct resource dove_ge00_resources[] = {
-	{
-		.name	= "ge00 irq",
-		.start	= IRQ_DOVE_GE00_SUM,
-		.end	= IRQ_DOVE_GE00_SUM,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dove_ge00 = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= dove_ge00_resources,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
 void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
-	eth_data->shared = &dove_ge00_shared;
-	dove_ge00.dev.platform_data = eth_data;
-
-	platform_device_register(&dove_ge00_shared);
-	platform_device_register(&dove_ge00);
+	orion_ge00_init(eth_data, &dove_mbus_dram_info,
+			DOVE_GE00_PHYS_BASE, IRQ_DOVE_GE00_SUM,
+			0, get_tclk());
 }
 
 /*****************************************************************************
  * SoC RTC
  ****************************************************************************/
-static struct resource dove_rtc_resource[] = {
-	{
-		.start	= DOVE_RTC_PHYS_BASE,
-		.end	= DOVE_RTC_PHYS_BASE + 32 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_DOVE_RTC,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
 void __init dove_rtc_init(void)
 {
-	platform_device_register_simple("rtc-mv", -1, dove_rtc_resource, 2);
+	orion_rtc_init(DOVE_RTC_PHYS_BASE, IRQ_DOVE_RTC);
 }
 
 /*****************************************************************************
  * SATA
  ****************************************************************************/
-static struct resource dove_sata_resources[] = {
-	{
-		.name	= "sata base",
-		.start	= DOVE_SATA_PHYS_BASE,
-		.end	= DOVE_SATA_PHYS_BASE + 0x5000 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.name	= "sata irq",
-		.start	= IRQ_DOVE_SATA,
-		.end	= IRQ_DOVE_SATA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dove_sata = {
-	.name		= "sata_mv",
-	.id		= 0,
-	.dev		= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(dove_sata_resources),
-	.resource	= dove_sata_resources,
-};
-
 void __init dove_sata_init(struct mv_sata_platform_data *sata_data)
 {
-	sata_data->dram = &dove_mbus_dram_info;
-	dove_sata.dev.platform_data = sata_data;
-	platform_device_register(&dove_sata);
+	orion_sata_init(sata_data, &dove_mbus_dram_info,
+			DOVE_SATA_PHYS_BASE, IRQ_DOVE_SATA);
+
 }
 
 /*****************************************************************************
  * UART0
  ****************************************************************************/
-static struct plat_serial8250_port dove_uart0_data[] = {
-	{
-		.mapbase	= DOVE_UART0_PHYS_BASE,
-		.membase	= (char *)DOVE_UART0_VIRT_BASE,
-		.irq		= IRQ_DOVE_UART_0,
-		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= 0,
-	}, {
-	},
-};
-
-static struct resource dove_uart0_resources[] = {
-	{
-		.start		= DOVE_UART0_PHYS_BASE,
-		.end		= DOVE_UART0_PHYS_BASE + SZ_256 - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= IRQ_DOVE_UART_0,
-		.end		= IRQ_DOVE_UART_0,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dove_uart0 = {
-	.name			= "serial8250",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= dove_uart0_data,
-	},
-	.resource		= dove_uart0_resources,
-	.num_resources		= ARRAY_SIZE(dove_uart0_resources),
-};
-
 void __init dove_uart0_init(void)
 {
-	platform_device_register(&dove_uart0);
+	orion_uart0_init(DOVE_UART0_VIRT_BASE, DOVE_UART0_PHYS_BASE,
+			 IRQ_DOVE_UART_0, get_tclk());
 }
 
 /*****************************************************************************
  * UART1
  ****************************************************************************/
-static struct plat_serial8250_port dove_uart1_data[] = {
-	{
-		.mapbase	= DOVE_UART1_PHYS_BASE,
-		.membase	= (char *)DOVE_UART1_VIRT_BASE,
-		.irq		= IRQ_DOVE_UART_1,
-		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= 0,
-	}, {
-	},
-};
-
-static struct resource dove_uart1_resources[] = {
-	{
-		.start		= DOVE_UART1_PHYS_BASE,
-		.end		= DOVE_UART1_PHYS_BASE + SZ_256 - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= IRQ_DOVE_UART_1,
-		.end		= IRQ_DOVE_UART_1,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dove_uart1 = {
-	.name			= "serial8250",
-	.id			= 1,
-	.dev			= {
-		.platform_data	= dove_uart1_data,
-	},
-	.resource		= dove_uart1_resources,
-	.num_resources		= ARRAY_SIZE(dove_uart1_resources),
-};
-
 void __init dove_uart1_init(void)
 {
-	platform_device_register(&dove_uart1);
+	orion_uart1_init(DOVE_UART1_VIRT_BASE, DOVE_UART1_PHYS_BASE,
+			 IRQ_DOVE_UART_1, get_tclk());
 }
 
 /*****************************************************************************
  * UART2
  ****************************************************************************/
-static struct plat_serial8250_port dove_uart2_data[] = {
-	{
-		.mapbase	= DOVE_UART2_PHYS_BASE,
-		.membase	= (char *)DOVE_UART2_VIRT_BASE,
-		.irq		= IRQ_DOVE_UART_2,
-		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= 0,
-	}, {
-	},
-};
-
-static struct resource dove_uart2_resources[] = {
-	{
-		.start		= DOVE_UART2_PHYS_BASE,
-		.end		= DOVE_UART2_PHYS_BASE + SZ_256 - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= IRQ_DOVE_UART_2,
-		.end		= IRQ_DOVE_UART_2,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dove_uart2 = {
-	.name			= "serial8250",
-	.id			= 2,
-	.dev			= {
-		.platform_data	= dove_uart2_data,
-	},
-	.resource		= dove_uart2_resources,
-	.num_resources		= ARRAY_SIZE(dove_uart2_resources),
-};
-
 void __init dove_uart2_init(void)
 {
-	platform_device_register(&dove_uart2);
+	orion_uart2_init(DOVE_UART2_VIRT_BASE, DOVE_UART2_PHYS_BASE,
+			 IRQ_DOVE_UART_2, get_tclk());
 }
 
 /*****************************************************************************
  * UART3
  ****************************************************************************/
-static struct plat_serial8250_port dove_uart3_data[] = {
-	{
-		.mapbase	= DOVE_UART3_PHYS_BASE,
-		.membase	= (char *)DOVE_UART3_VIRT_BASE,
-		.irq		= IRQ_DOVE_UART_3,
-		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= 0,
-	}, {
-	},
-};
-
-static struct resource dove_uart3_resources[] = {
-	{
-		.start		= DOVE_UART3_PHYS_BASE,
-		.end		= DOVE_UART3_PHYS_BASE + SZ_256 - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= IRQ_DOVE_UART_3,
-		.end		= IRQ_DOVE_UART_3,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dove_uart3 = {
-	.name			= "serial8250",
-	.id			= 3,
-	.dev			= {
-		.platform_data	= dove_uart3_data,
-	},
-	.resource		= dove_uart3_resources,
-	.num_resources		= ARRAY_SIZE(dove_uart3_resources),
-};
-
 void __init dove_uart3_init(void)
 {
-	platform_device_register(&dove_uart3);
+	orion_uart3_init(DOVE_UART3_VIRT_BASE, DOVE_UART3_PHYS_BASE,
+			 IRQ_DOVE_UART_3, get_tclk());
 }
 
 /*****************************************************************************
- * SPI0
+ * SPI
  ****************************************************************************/
-static struct orion_spi_info dove_spi0_data = {
-	.tclk		= 0,
-};
-
-static struct resource dove_spi0_resources[] = {
-	{
-		.start	= DOVE_SPI0_PHYS_BASE,
-		.end	= DOVE_SPI0_PHYS_BASE + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_DOVE_SPI0,
-		.end	= IRQ_DOVE_SPI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dove_spi0 = {
-	.name		= "orion_spi",
-	.id		= 0,
-	.resource	= dove_spi0_resources,
-	.dev		= {
-		.platform_data	= &dove_spi0_data,
-	},
-	.num_resources	= ARRAY_SIZE(dove_spi0_resources),
-};
-
 void __init dove_spi0_init(void)
 {
-	platform_device_register(&dove_spi0);
+	orion_spi_init(DOVE_SPI0_PHYS_BASE, get_tclk());
 }
 
-/*****************************************************************************
- * SPI1
- ****************************************************************************/
-static struct orion_spi_info dove_spi1_data = {
-	.tclk		= 0,
-};
-
-static struct resource dove_spi1_resources[] = {
-	{
-		.start	= DOVE_SPI1_PHYS_BASE,
-		.end	= DOVE_SPI1_PHYS_BASE + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_DOVE_SPI1,
-		.end	= IRQ_DOVE_SPI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dove_spi1 = {
-	.name		= "orion_spi",
-	.id		= 1,
-	.resource	= dove_spi1_resources,
-	.dev		= {
-		.platform_data	= &dove_spi1_data,
-	},
-	.num_resources	= ARRAY_SIZE(dove_spi1_resources),
-};
-
 void __init dove_spi1_init(void)
 {
-	platform_device_register(&dove_spi1);
+	orion_spi_init(DOVE_SPI1_PHYS_BASE, get_tclk());
 }
 
 /*****************************************************************************
  * I2C
  ****************************************************************************/
-static struct mv64xxx_i2c_pdata dove_i2c_data = {
-	.freq_m		= 10, /* assumes 166 MHz TCLK gets 94.3kHz */
-	.freq_n		= 3,
-	.timeout	= 1000, /* Default timeout of 1 second */
-};
-
-static struct resource dove_i2c_resources[] = {
-	{
-		.name	= "i2c base",
-		.start	= DOVE_I2C_PHYS_BASE,
-		.end	= DOVE_I2C_PHYS_BASE + 0x20 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.name	= "i2c irq",
-		.start	= IRQ_DOVE_I2C,
-		.end	= IRQ_DOVE_I2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dove_i2c = {
-	.name		= MV64XXX_I2C_CTLR_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dove_i2c_resources),
-	.resource	= dove_i2c_resources,
-	.dev		= {
-		.platform_data = &dove_i2c_data,
-	},
-};
-
 void __init dove_i2c_init(void)
 {
-	platform_device_register(&dove_i2c);
+	orion_i2c_init(DOVE_I2C_PHYS_BASE, IRQ_DOVE_I2C, 10);
 }
 
 /*****************************************************************************
@@ -553,209 +195,23 @@ struct sys_timer dove_timer = {
 	.init = dove_timer_init,
 };
 
-/*****************************************************************************
- * XOR
- ****************************************************************************/
-static struct mv_xor_platform_shared_data dove_xor_shared_data = {
-	.dram		= &dove_mbus_dram_info,
-};
-
 /*****************************************************************************
  * XOR 0
  ****************************************************************************/
-static u64 dove_xor0_dmamask = DMA_BIT_MASK(32);
-
-static struct resource dove_xor0_shared_resources[] = {
-	{
-		.name	= "xor 0 low",
-		.start	= DOVE_XOR0_PHYS_BASE,
-		.end	= DOVE_XOR0_PHYS_BASE + 0xff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.name	= "xor 0 high",
-		.start	= DOVE_XOR0_HIGH_PHYS_BASE,
-		.end	= DOVE_XOR0_HIGH_PHYS_BASE + 0xff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dove_xor0_shared = {
-	.name		= MV_XOR_SHARED_NAME,
-	.id		= 0,
-	.dev		= {
-		.platform_data = &dove_xor_shared_data,
-	},
-	.num_resources	= ARRAY_SIZE(dove_xor0_shared_resources),
-	.resource	= dove_xor0_shared_resources,
-};
-
-static struct resource dove_xor00_resources[] = {
-	[0] = {
-		.start	= IRQ_DOVE_XOR_00,
-		.end	= IRQ_DOVE_XOR_00,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv_xor_platform_data dove_xor00_data = {
-	.shared		= &dove_xor0_shared,
-	.hw_id		= 0,
-	.pool_size	= PAGE_SIZE,
-};
-
-static struct platform_device dove_xor00_channel = {
-	.name		= MV_XOR_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dove_xor00_resources),
-	.resource	= dove_xor00_resources,
-	.dev		= {
-		.dma_mask		= &dove_xor0_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= &dove_xor00_data,
-	},
-};
-
-static struct resource dove_xor01_resources[] = {
-	[0] = {
-		.start	= IRQ_DOVE_XOR_01,
-		.end	= IRQ_DOVE_XOR_01,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv_xor_platform_data dove_xor01_data = {
-	.shared		= &dove_xor0_shared,
-	.hw_id		= 1,
-	.pool_size	= PAGE_SIZE,
-};
-
-static struct platform_device dove_xor01_channel = {
-	.name		= MV_XOR_NAME,
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(dove_xor01_resources),
-	.resource	= dove_xor01_resources,
-	.dev		= {
-		.dma_mask		= &dove_xor0_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= &dove_xor01_data,
-	},
-};
-
 void __init dove_xor0_init(void)
 {
-	platform_device_register(&dove_xor0_shared);
-
-	/*
-	 * two engines can't do memset simultaneously, this limitation
-	 * satisfied by removing memset support from one of the engines.
-	 */
-	dma_cap_set(DMA_MEMCPY, dove_xor00_data.cap_mask);
-	dma_cap_set(DMA_XOR, dove_xor00_data.cap_mask);
-	platform_device_register(&dove_xor00_channel);
-
-	dma_cap_set(DMA_MEMCPY, dove_xor01_data.cap_mask);
-	dma_cap_set(DMA_MEMSET, dove_xor01_data.cap_mask);
-	dma_cap_set(DMA_XOR, dove_xor01_data.cap_mask);
-	platform_device_register(&dove_xor01_channel);
+	orion_xor0_init(&dove_mbus_dram_info,
+			DOVE_XOR0_PHYS_BASE, DOVE_XOR0_HIGH_PHYS_BASE,
+			IRQ_DOVE_XOR_00, IRQ_DOVE_XOR_01);
 }
 
 /*****************************************************************************
  * XOR 1
  ****************************************************************************/
-static u64 dove_xor1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource dove_xor1_shared_resources[] = {
-	{
-		.name	= "xor 0 low",
-		.start	= DOVE_XOR1_PHYS_BASE,
-		.end	= DOVE_XOR1_PHYS_BASE + 0xff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.name	= "xor 0 high",
-		.start	= DOVE_XOR1_HIGH_PHYS_BASE,
-		.end	= DOVE_XOR1_HIGH_PHYS_BASE + 0xff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dove_xor1_shared = {
-	.name		= MV_XOR_SHARED_NAME,
-	.id		= 1,
-	.dev		= {
-		.platform_data = &dove_xor_shared_data,
-	},
-	.num_resources	= ARRAY_SIZE(dove_xor1_shared_resources),
-	.resource	= dove_xor1_shared_resources,
-};
-
-static struct resource dove_xor10_resources[] = {
-	[0] = {
-		.start	= IRQ_DOVE_XOR_10,
-		.end	= IRQ_DOVE_XOR_10,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv_xor_platform_data dove_xor10_data = {
-	.shared		= &dove_xor1_shared,
-	.hw_id		= 0,
-	.pool_size	= PAGE_SIZE,
-};
-
-static struct platform_device dove_xor10_channel = {
-	.name		= MV_XOR_NAME,
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(dove_xor10_resources),
-	.resource	= dove_xor10_resources,
-	.dev		= {
-		.dma_mask		= &dove_xor1_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= &dove_xor10_data,
-	},
-};
-
-static struct resource dove_xor11_resources[] = {
-	[0] = {
-		.start	= IRQ_DOVE_XOR_11,
-		.end	= IRQ_DOVE_XOR_11,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv_xor_platform_data dove_xor11_data = {
-	.shared		= &dove_xor1_shared,
-	.hw_id		= 1,
-	.pool_size	= PAGE_SIZE,
-};
-
-static struct platform_device dove_xor11_channel = {
-	.name		= MV_XOR_NAME,
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(dove_xor11_resources),
-	.resource	= dove_xor11_resources,
-	.dev		= {
-		.dma_mask		= &dove_xor1_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= &dove_xor11_data,
-	},
-};
-
 void __init dove_xor1_init(void)
 {
-	platform_device_register(&dove_xor1_shared);
-
-	/*
-	 * two engines can't do memset simultaneously, this limitation
-	 * satisfied by removing memset support from one of the engines.
-	 */
-	dma_cap_set(DMA_MEMCPY, dove_xor10_data.cap_mask);
-	dma_cap_set(DMA_XOR, dove_xor10_data.cap_mask);
-	platform_device_register(&dove_xor10_channel);
-
-	dma_cap_set(DMA_MEMCPY, dove_xor11_data.cap_mask);
-	dma_cap_set(DMA_MEMSET, dove_xor11_data.cap_mask);
-	dma_cap_set(DMA_XOR, dove_xor11_data.cap_mask);
-	platform_device_register(&dove_xor11_channel);
+	orion_xor1_init(DOVE_XOR1_PHYS_BASE, DOVE_XOR1_HIGH_PHYS_BASE,
+			IRQ_DOVE_XOR_10, IRQ_DOVE_XOR_11);
 }
 
 /*****************************************************************************
@@ -833,14 +289,6 @@ void __init dove_init(void)
 #endif
 	dove_setup_cpu_mbus();
 
-	dove_ge00_shared_data.t_clk = tclk;
-	dove_uart0_data[0].uartclk = tclk;
-	dove_uart1_data[0].uartclk = tclk;
-	dove_uart2_data[0].uartclk = tclk;
-	dove_uart3_data[0].uartclk = tclk;
-	dove_spi0_data.tclk = tclk;
-	dove_spi1_data.tclk = tclk;
-
 	/* internal devices that every board has */
 	dove_rtc_init();
 	dove_xor0_init();

arch/arm/mach-dove/mpp.c

@@ -11,24 +11,17 @@
 #include <linux/kernel.h>
 #include <linux/gpio.h>
 #include <linux/io.h>
-
+#include <plat/mpp.h>
 #include <mach/dove.h>
-
 #include "mpp.h"
 
-#define MPP_NR_REGS 4
-#define MPP_CTRL(i)	((i) == 3 ?				\
-			 DOVE_MPP_CTRL4_VIRT_BASE :		\
-			 DOVE_MPP_VIRT_BASE + (i) * 4)
-#define PMU_SIG_REGS 2
-#define PMU_SIG_CTRL(i)	(DOVE_PMU_SIG_CTRL + (i) * 4)
-
 struct dove_mpp_grp {
 	int start;
 	int end;
 };
 
-static struct dove_mpp_grp dove_mpp_grp[] = {
+/* Map a group to a range of GPIO pins in that group */
+static const struct dove_mpp_grp dove_mpp_grp[] = {
 	[MPP_24_39] = {
 		.start	= 24,
 		.end	= 39,
@@ -38,8 +31,8 @@ static struct dove_mpp_grp dove_mpp_grp[] = {
 		.end	= 45,
 	},
 	[MPP_46_51] = {
-		.start	= 40,
-		.end	= 45,
+		.start	= 46,
+		.end	= 51,
 	},
 	[MPP_58_61] = {
 		.start	= 58,
@@ -51,6 +44,8 @@ static struct dove_mpp_grp dove_mpp_grp[] = {
 	},
 };
 
+/* Enable gpio for a range of pins. mode should be a combination of
+   GPIO_OUTPUT_OK | GPIO_INPUT_OK */
 static void dove_mpp_gpio_mode(int start, int end, int gpio_mode)
 {
 	int i;
@@ -59,24 +54,17 @@ static void dove_mpp_gpio_mode(int start, int end, int gpio_mode)
 		orion_gpio_set_valid(i, gpio_mode);
 }
 
+/* Dump all the extra MPP registers. The platform code will dump the
+   registers for pins 0-23. */
 static void dove_mpp_dump_regs(void)
 {
-#ifdef DEBUG
-	int i;
+	pr_debug("PMU_CTRL4_CTRL: %08x\n",
+		 readl(DOVE_MPP_CTRL4_VIRT_BASE));
 
-	pr_debug("MPP_CTRL regs:");
-	for (i = 0; i < MPP_NR_REGS; i++)
-		printk(" %08x", readl(MPP_CTRL(i)));
-	printk("\n");
+	pr_debug("PMU_MPP_GENERAL_CTRL: %08x\n",
+		 readl(DOVE_PMU_MPP_GENERAL_CTRL));
 
-	pr_debug("PMU_SIG_CTRL regs:");
-	for (i = 0; i < PMU_SIG_REGS; i++)
-		printk(" %08x", readl(PMU_SIG_CTRL(i)));
-	printk("\n");
-
-	pr_debug("PMU_MPP_GENERAL_CTRL: %08x\n", readl(DOVE_PMU_MPP_GENERAL_CTRL));
 	pr_debug("MPP_GENERAL: %08x\n", readl(DOVE_MPP_GENERAL_VIRT_BASE));
-#endif
 }
 
 static void dove_mpp_cfg_nfc(int sel)
@@ -92,7 +80,7 @@ static void dove_mpp_cfg_nfc(int sel)
 
 static void dove_mpp_cfg_au1(int sel)
 {
-	u32 mpp_ctrl4		= readl(DOVE_MPP_CTRL4_VIRT_BASE);
+	u32 mpp_ctrl4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
 	u32 ssp_ctrl1 = readl(DOVE_SSP_CTRL_STATUS_1);
 	u32 mpp_gen_ctrl = readl(DOVE_MPP_GENERAL_VIRT_BASE);
 	u32 global_cfg_2 = readl(DOVE_GLOBAL_CONFIG_2);
@@ -128,82 +116,46 @@ static void dove_mpp_cfg_au1(int sel)
 	writel(global_cfg_2, DOVE_GLOBAL_CONFIG_2);
 }
 
-static void dove_mpp_conf_grp(int num, int sel, u32 *mpp_ctrl)
-{
-	int start = dove_mpp_grp[num].start;
-	int end = dove_mpp_grp[num].end;
-	int gpio_mode = sel ? GPIO_OUTPUT_OK | GPIO_INPUT_OK : 0;
-
-	*mpp_ctrl &= ~(0x1 << num);
-	*mpp_ctrl |= sel << num;
-
-	dove_mpp_gpio_mode(start, end, gpio_mode);
-}
-
-void __init dove_mpp_conf(unsigned int *mpp_list)
+/* Configure the group registers, enabling GPIO if sel indicates the
+   pin is to be used for GPIO */
+static void dove_mpp_conf_grp(unsigned int *mpp_grp_list)
 {
-	u32 mpp_ctrl[MPP_NR_REGS];
-	u32 pmu_mpp_ctrl = 0;
-	u32 pmu_sig_ctrl[PMU_SIG_REGS];
-	int i;
-
-	for (i = 0; i < MPP_NR_REGS; i++)
-		mpp_ctrl[i] = readl(MPP_CTRL(i));
-
-	for (i = 0; i < PMU_SIG_REGS; i++)
-		pmu_sig_ctrl[i] = readl(PMU_SIG_CTRL(i));
-
-	pmu_mpp_ctrl = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+	u32 mpp_ctrl4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
+	int gpio_mode;
 
-	dove_mpp_dump_regs();
-
-	for ( ; *mpp_list != MPP_END; mpp_list++) {
-		unsigned int num = MPP_NUM(*mpp_list);
-		unsigned int sel = MPP_SEL(*mpp_list);
-		int shift, gpio_mode;
-
-		if (num > MPP_MAX) {
-			pr_err("dove: invalid MPP number (%u)\n", num);
-			continue;
-		}
-
-		if (*mpp_list & MPP_NFC_MASK) {
-			dove_mpp_cfg_nfc(sel);
-			continue;
-		}
+	for ( ; *mpp_grp_list; mpp_grp_list++) {
+		unsigned int num = MPP_NUM(*mpp_grp_list);
+		unsigned int sel = MPP_SEL(*mpp_grp_list);
 
-		if (*mpp_list & MPP_AU1_MASK) {
-			dove_mpp_cfg_au1(sel);
+		if (num > MPP_GRP_MAX) {
+			pr_err("dove: invalid MPP GRP number (%u)\n", num);
 			continue;
 		}
 
-		if (*mpp_list & MPP_GRP_MASK) {
-			dove_mpp_conf_grp(num, sel, &mpp_ctrl[3]);
-			continue;
-		}
-
-		shift = (num & 7) << 2;
-		if (*mpp_list & MPP_PMU_MASK) {
-			pmu_mpp_ctrl |= (0x1 << num);
-			pmu_sig_ctrl[num / 8] &= ~(0xf << shift);
-			pmu_sig_ctrl[num / 8] |= 0xf << shift;
-			gpio_mode = 0;
-		} else {
-			mpp_ctrl[num / 8] &= ~(0xf << shift);
-			mpp_ctrl[num / 8] |= sel << shift;
-			gpio_mode = GPIO_OUTPUT_OK | GPIO_INPUT_OK;
-		}
+		mpp_ctrl4 &= ~(0x1 << num);
+		mpp_ctrl4 |= sel << num;
 
-		orion_gpio_set_valid(num, gpio_mode);
+		gpio_mode = sel ? GPIO_OUTPUT_OK | GPIO_INPUT_OK : 0;
+		dove_mpp_gpio_mode(dove_mpp_grp[num].start,
+				   dove_mpp_grp[num].end, gpio_mode);
 	}
+	writel(mpp_ctrl4, DOVE_MPP_CTRL4_VIRT_BASE);
+}
 
-	for (i = 0; i < MPP_NR_REGS; i++)
-		writel(mpp_ctrl[i], MPP_CTRL(i));
+/* Configure the various MPP pins on Dove */
+void __init dove_mpp_conf(unsigned int *mpp_list,
+			  unsigned int *mpp_grp_list,
+			  unsigned int grp_au1_52_57,
+			  unsigned int grp_nfc_64_71)
+{
+	dove_mpp_dump_regs();
 
-	for (i = 0; i < PMU_SIG_REGS; i++)
-		writel(pmu_sig_ctrl[i], PMU_SIG_CTRL(i));
+	/* Use platform code for pins 0-23 */
+	orion_mpp_conf(mpp_list, 0, MPP_MAX, DOVE_MPP_VIRT_BASE);
 
-	writel(pmu_mpp_ctrl, DOVE_PMU_MPP_GENERAL_CTRL);
+	dove_mpp_conf_grp(mpp_grp_list);
+	dove_mpp_cfg_au1(grp_au1_52_57);
+	dove_mpp_cfg_nfc(grp_nfc_64_71);
 
 	dove_mpp_dump_regs();
 }

arch/arm/mach-dove/mpp.h

@@ -1,178 +1,150 @@
 #ifndef __ARCH_DOVE_MPP_CODED_H
 #define __ARCH_DOVE_MPP_CODED_H
 
-#define MPP(_num, _mode, _pmu, _grp, _au1, _nfc) (	\
-/* MPP/group number */		((_num) & 0xff) |		\
-/* MPP select value */		(((_mode) & 0xf) << 8) |	\
-/* MPP PMU */			((!!(_pmu)) << 12) |		\
-/* group flag */		((!!(_grp)) << 13) |		\
-/* AU1 flag */			((!!(_au1)) << 14) |		\
-/* NFCE flag */			((!!(_nfc)) << 15))
-
-#define MPP_MAX	71
-
-#define MPP_NUM(x)    ((x) & 0xff)
-#define MPP_SEL(x)    (((x) >> 8) & 0xf)
-
-#define MPP_PMU_MASK		MPP(0, 0x0, 1, 0, 0, 0)
-#define MPP_GRP_MASK		MPP(0, 0x0, 0, 1, 0, 0)
-#define MPP_AU1_MASK		MPP(0, 0x0, 0, 0, 1, 0)
-#define MPP_NFC_MASK		MPP(0, 0x0, 0, 0, 0, 1)
-
-#define MPP_END			MPP(0xff, 0xf, 1, 1, 1, 1)
-
-#define MPP_PMU_DRIVE_0		0x1
-#define MPP_PMU_DRIVE_1		0x2
-#define MPP_PMU_SDI		0x3
-#define MPP_PMU_CPU_PWRDWN	0x4
-#define MPP_PMU_STBY_PWRDWN	0x5
-#define MPP_PMU_CORE_PWR_GOOD	0x8
-#define MPP_PMU_BAT_FAULT	0xa
-#define MPP_PMU_EXT0_WU		0xb
-#define MPP_PMU_EXT1_WU		0xc
-#define MPP_PMU_EXT2_WU		0xd
-#define MPP_PMU_BLINK		0xe
-#define MPP_PMU(_num, _mode)	MPP((_num), MPP_PMU_##_mode, 1, 0, 0, 0)
-
-#define MPP_PIN(_num, _mode)	MPP((_num), (_mode), 0, 0, 0, 0)
-#define MPP_GRP(_grp, _mode)	MPP((_grp), (_mode), 0, 1, 0, 0)
-#define MPP_GRP_AU1(_mode)	MPP(0, (_mode), 0, 0, 1, 0)
-#define MPP_GRP_NFC(_mode)	MPP(0, (_mode), 0, 0, 0, 1)
-
-#define MPP0_GPIO0		MPP_PIN(0, 0x0)
-#define MPP0_UA2_RTSn		MPP_PIN(0, 0x2)
-#define MPP0_SDIO0_CD		MPP_PIN(0, 0x3)
-#define MPP0_LCD0_PWM		MPP_PIN(0, 0xf)
-
-#define MPP1_GPIO1		MPP_PIN(1, 0x0)
-#define MPP1_UA2_CTSn		MPP_PIN(1, 0x2)
-#define MPP1_SDIO0_WP		MPP_PIN(1, 0x3)
-#define MPP1_LCD1_PWM		MPP_PIN(1, 0xf)
-
-#define MPP2_GPIO2		MPP_PIN(2, 0x0)
-#define MPP2_SATA_PRESENT	MPP_PIN(2, 0x1)
-#define MPP2_UA2_TXD		MPP_PIN(2, 0x2)
-#define MPP2_SDIO0_BUS_POWER	MPP_PIN(2, 0x3)
-#define MPP2_UA_RTSn1		MPP_PIN(2, 0x4)
-
-#define MPP3_GPIO3		MPP_PIN(3, 0x0)
-#define MPP3_SATA_ACT		MPP_PIN(3, 0x1)
-#define MPP3_UA2_RXD		MPP_PIN(3, 0x2)
-#define MPP3_SDIO0_LED_CTRL	MPP_PIN(3, 0x3)
-#define MPP3_UA_CTSn1		MPP_PIN(3, 0x4)
-#define MPP3_SPI_LCD_CS1	MPP_PIN(3, 0xf)
-
-#define MPP4_GPIO4		MPP_PIN(4, 0x0)
-#define MPP4_UA3_RTSn		MPP_PIN(4, 0x2)
-#define MPP4_SDIO1_CD		MPP_PIN(4, 0x3)
-#define MPP4_SPI_1_MISO		MPP_PIN(4, 0x4)
-
-#define MPP5_GPIO5		MPP_PIN(5, 0x0)
-#define MPP5_UA3_CTSn		MPP_PIN(5, 0x2)
-#define MPP5_SDIO1_WP		MPP_PIN(5, 0x3)
-#define MPP5_SPI_1_CS		MPP_PIN(5, 0x4)
-
-#define MPP6_GPIO6		MPP_PIN(6, 0x0)
-#define MPP6_UA3_TXD		MPP_PIN(6, 0x2)
-#define MPP6_SDIO1_BUS_POWER	MPP_PIN(6, 0x3)
-#define MPP6_SPI_1_MOSI		MPP_PIN(6, 0x4)
-
-#define MPP7_GPIO7		MPP_PIN(7, 0x0)
-#define MPP7_UA3_RXD		MPP_PIN(7, 0x2)
-#define MPP7_SDIO1_LED_CTRL	MPP_PIN(7, 0x3)
-#define MPP7_SPI_1_SCK		MPP_PIN(7, 0x4)
-
-#define MPP8_GPIO8		MPP_PIN(8, 0x0)
-#define MPP8_WD_RST_OUT		MPP_PIN(8, 0x1)
-
-#define MPP9_GPIO9		MPP_PIN(9, 0x0)
-#define MPP9_PEX1_CLKREQn	MPP_PIN(9, 0x5)
-
-#define MPP10_GPIO10		MPP_PIN(10, 0x0)
-#define MPP10_SSP_SCLK		MPP_PIN(10, 0x5)
-
-#define MPP11_GPIO11		MPP_PIN(11, 0x0)
-#define MPP11_SATA_PRESENT	MPP_PIN(11, 0x1)
-#define MPP11_SATA_ACT		MPP_PIN(11, 0x2)
-#define MPP11_SDIO0_LED_CTRL	MPP_PIN(11, 0x3)
-#define MPP11_SDIO1_LED_CTRL	MPP_PIN(11, 0x4)
-#define MPP11_PEX0_CLKREQn	MPP_PIN(11, 0x5)
-
-#define MPP12_GPIO12		MPP_PIN(12, 0x0)
-#define MPP12_SATA_ACT		MPP_PIN(12, 0x1)
-#define MPP12_UA2_RTSn		MPP_PIN(12, 0x2)
-#define MPP12_AD0_I2S_EXT_MCLK	MPP_PIN(12, 0x3)
-#define MPP12_SDIO1_CD		MPP_PIN(12, 0x4)
-
-#define MPP13_GPIO13		MPP_PIN(13, 0x0)
-#define MPP13_UA2_CTSn		MPP_PIN(13, 0x2)
-#define MPP13_AD1_I2S_EXT_MCLK	MPP_PIN(13, 0x3)
-#define MPP13_SDIO1WP		MPP_PIN(13, 0x4)
-#define MPP13_SSP_EXTCLK	MPP_PIN(13, 0x5)
-
-#define MPP14_GPIO14		MPP_PIN(14, 0x0)
-#define MPP14_UA2_TXD		MPP_PIN(14, 0x2)
-#define MPP14_SDIO1_BUS_POWER	MPP_PIN(14, 0x4)
-#define MPP14_SSP_RXD		MPP_PIN(14, 0x5)
-
-#define MPP15_GPIO15		MPP_PIN(15, 0x0)
-#define MPP15_UA2_RXD		MPP_PIN(15, 0x2)
-#define MPP15_SDIO1_LED_CTRL	MPP_PIN(15, 0x4)
-#define MPP15_SSP_SFRM		MPP_PIN(15, 0x5)
-
-#define MPP16_GPIO16		MPP_PIN(16, 0x0)
-#define MPP16_UA3_RTSn		MPP_PIN(16, 0x2)
-#define MPP16_SDIO0_CD		MPP_PIN(16, 0x3)
-#define MPP16_SPI_LCD_CS1	MPP_PIN(16, 0x4)
-#define MPP16_AC97_SDATA_IN1	MPP_PIN(16, 0x5)
-
-#define MPP17_GPIO17		MPP_PIN(17, 0x0)
-#define MPP17_AC97_SYSCLK_OUT	MPP_PIN(17, 0x1)
-#define MPP17_UA3_CTSn		MPP_PIN(17, 0x2)
-#define MPP17_SDIO0_WP		MPP_PIN(17, 0x3)
-#define MPP17_TW_SDA2		MPP_PIN(17, 0x4)
-#define MPP17_AC97_SDATA_IN2	MPP_PIN(17, 0x5)
-
-#define MPP18_GPIO18		MPP_PIN(18, 0x0)
-#define MPP18_UA3_TXD		MPP_PIN(18, 0x2)
-#define MPP18_SDIO0_BUS_POWER	MPP_PIN(18, 0x3)
-#define MPP18_LCD0_PWM		MPP_PIN(18, 0x4)
-#define MPP18_AC_SDATA_IN3	MPP_PIN(18, 0x5)
-
-#define MPP19_GPIO19		MPP_PIN(19, 0x0)
-#define MPP19_UA3_RXD		MPP_PIN(19, 0x2)
-#define MPP19_SDIO0_LED_CTRL	MPP_PIN(19, 0x3)
-#define MPP19_TW_SCK2		MPP_PIN(19, 0x4)
-
-#define MPP20_GPIO20		MPP_PIN(20, 0x0)
-#define MPP20_AC97_SYSCLK_OUT	MPP_PIN(20, 0x1)
-#define MPP20_SPI_LCD_MISO	MPP_PIN(20, 0x2)
-#define MPP20_SDIO1_CD		MPP_PIN(20, 0x3)
-#define MPP20_SDIO0_CD		MPP_PIN(20, 0x5)
-#define MPP20_SPI_1_MISO	MPP_PIN(20, 0x6)
-
-#define MPP21_GPIO21		MPP_PIN(21, 0x0)
-#define MPP21_UA1_RTSn		MPP_PIN(21, 0x1)
-#define MPP21_SPI_LCD_CS0	MPP_PIN(21, 0x2)
-#define MPP21_SDIO1_WP		MPP_PIN(21, 0x3)
-#define MPP21_SSP_SFRM		MPP_PIN(21, 0x4)
-#define MPP21_SDIO0_WP		MPP_PIN(21, 0x5)
-#define MPP21_SPI_1_CS		MPP_PIN(21, 0x6)
-
-#define MPP22_GPIO22		MPP_PIN(22, 0x0)
-#define MPP22_UA1_CTSn		MPP_PIN(22, 0x1)
-#define MPP22_SPI_LCD_MOSI	MPP_PIN(22, 0x2)
-#define MPP22_SDIO1_BUS_POWER	MPP_PIN(22, 0x3)
-#define MPP22_SSP_TXD		MPP_PIN(22, 0x4)
-#define MPP22_SDIO0_BUS_POWER	MPP_PIN(22, 0x5)
-#define MPP22_SPI_1_MOSI	MPP_PIN(22, 0x6)
-
-#define MPP23_GPIO23		MPP_PIN(23, 0x0)
-#define MPP23_SPI_LCD_SCK	MPP_PIN(23, 0x2)
-#define MPP23_SDIO1_LED_CTRL	MPP_PIN(23, 0x3)
-#define MPP23_SSP_SCLK		MPP_PIN(23, 0x4)
-#define MPP23_SDIO0_LED_CTRL	MPP_PIN(23, 0x5)
-#define MPP23_SPI_1_SCK		MPP_PIN(23, 0x6)
+#define MPP(_num, _sel, _in, _out) ( \
+	/* MPP number */		((_num) & 0xff) | \
+	/* MPP select value */		(((_sel) & 0xf) << 8) | \
+	/* may be input signal */	((!!(_in)) << 12) | \
+	/* may be output signal */	((!!(_out)) << 13))
+
+#define MPP0_GPIO0		MPP(0, 0x0, 1, 1)
+#define MPP0_UA2_RTSn		MPP(0, 0x2, 0, 0)
+#define MPP0_SDIO0_CD		MPP(0, 0x3, 0, 0)
+#define MPP0_LCD0_PWM		MPP(0, 0xf, 0, 0)
+
+#define MPP1_GPIO1		MPP(1, 0x0, 1, 1)
+#define MPP1_UA2_CTSn		MPP(1, 0x2, 0, 0)
+#define MPP1_SDIO0_WP		MPP(1, 0x3, 0, 0)
+#define MPP1_LCD1_PWM		MPP(1, 0xf, 0, 0)
+
+#define MPP2_GPIO2		MPP(2, 0x0, 1, 1)
+#define MPP2_SATA_PRESENT	MPP(2, 0x1, 0, 0)
+#define MPP2_UA2_TXD		MPP(2, 0x2, 0, 0)
+#define MPP2_SDIO0_BUS_POWER	MPP(2, 0x3, 0, 0)
+#define MPP2_UA_RTSn1		MPP(2, 0x4, 0, 0)
+
+#define MPP3_GPIO3		MPP(3, 0x0, 1, 1)
+#define MPP3_SATA_ACT		MPP(3, 0x1, 0, 0)
+#define MPP3_UA2_RXD		MPP(3, 0x2, 0, 0)
+#define MPP3_SDIO0_LED_CTRL	MPP(3, 0x3, 0, 0)
+#define MPP3_UA_CTSn1		MPP(3, 0x4, 0, 0)
+#define MPP3_SPI_LCD_CS1	MPP(3, 0xf, 0, 0)
+
+#define MPP4_GPIO4		MPP(4, 0x0, 1, 1)
+#define MPP4_UA3_RTSn		MPP(4, 0x2, 0, 0)
+#define MPP4_SDIO1_CD		MPP(4, 0x3, 0, 0)
+#define MPP4_SPI_1_MISO		MPP(4, 0x4, 0, 0)
+
+#define MPP5_GPIO5		MPP(5, 0x0, 1, 1)
+#define MPP5_UA3_CTSn		MPP(5, 0x2, 0, 0)
+#define MPP5_SDIO1_WP		MPP(5, 0x3, 0, 0)
+#define MPP5_SPI_1_CS		MPP(5, 0x4, 0, 0)
+
+#define MPP6_GPIO6		MPP(6, 0x0, 1, 1)
+#define MPP6_UA3_TXD		MPP(6, 0x2, 0, 0)
+#define MPP6_SDIO1_BUS_POWER	MPP(6, 0x3, 0, 0)
+#define MPP6_SPI_1_MOSI		MPP(6, 0x4, 0, 0)
+
+#define MPP7_GPIO7		MPP(7, 0x0, 1, 1)
+#define MPP7_UA3_RXD		MPP(7, 0x2, 0, 0)
+#define MPP7_SDIO1_LED_CTRL	MPP(7, 0x3, 0, 0)
+#define MPP7_SPI_1_SCK		MPP(7, 0x4, 0, 0)
+
+#define MPP8_GPIO8		MPP(8, 0x0, 1, 1)
+#define MPP8_WD_RST_OUT		MPP(8, 0x1, 0, 0)
+
+#define MPP9_GPIO9		MPP(9, 0x0, 1, 1)
+#define MPP9_PEX1_CLKREQn	MPP(9, 0x5, 0, 0)
+
+#define MPP10_GPIO10		MPP(10, 0x0, 1, 1)
+#define MPP10_SSP_SCLK		MPP(10, 0x5, 0, 0)
+
+#define MPP11_GPIO11		MPP(11, 0x0, 1, 1)
+#define MPP11_SATA_PRESENT	MPP(11, 0x1, 0, 0)
+#define MPP11_SATA_ACT		MPP(11, 0x2, 0, 0)
+#define MPP11_SDIO0_LED_CTRL	MPP(11, 0x3, 0, 0)
+#define MPP11_SDIO1_LED_CTRL	MPP(11, 0x4, 0, 0)
+#define MPP11_PEX0_CLKREQn	MPP(11, 0x5, 0, 0)
+
+#define MPP12_GPIO12		MPP(12, 0x0, 1, 1)
+#define MPP12_SATA_ACT		MPP(12, 0x1, 0, 0)
+#define MPP12_UA2_RTSn		MPP(12, 0x2, 0, 0)
+#define MPP12_AD0_I2S_EXT_MCLK	MPP(12, 0x3, 0, 0)
+#define MPP12_SDIO1_CD		MPP(12, 0x4, 0, 0)
+
+#define MPP13_GPIO13		MPP(13, 0x0, 1, 1)
+#define MPP13_UA2_CTSn		MPP(13, 0x2, 0, 0)
+#define MPP13_AD1_I2S_EXT_MCLK	MPP(13, 0x3, 0, 0)
+#define MPP13_SDIO1WP		MPP(13, 0x4, 0, 0)
+#define MPP13_SSP_EXTCLK	MPP(13, 0x5, 0, 0)
+
+#define MPP14_GPIO14		MPP(14, 0x0, 1, 1)
+#define MPP14_UA2_TXD		MPP(14, 0x2, 0, 0)
+#define MPP14_SDIO1_BUS_POWER	MPP(14, 0x4, 0, 0)
+#define MPP14_SSP_RXD		MPP(14, 0x5, 0, 0)
+
+#define MPP15_GPIO15		MPP(15, 0x0, 1, 1)
+#define MPP15_UA2_RXD		MPP(15, 0x2, 0, 0)
+#define MPP15_SDIO1_LED_CTRL	MPP(15, 0x4, 0, 0)
+#define MPP15_SSP_SFRM		MPP(15, 0x5, 0, 0)
+
+#define MPP16_GPIO16		MPP(16, 0x0, 1, 1)
+#define MPP16_UA3_RTSn		MPP(16, 0x2, 0, 0)
+#define MPP16_SDIO0_CD		MPP(16, 0x3, 0, 0)
+#define MPP16_SPI_LCD_CS1	MPP(16, 0x4, 0, 0)
+#define MPP16_AC97_SDATA_IN1	MPP(16, 0x5, 0, 0)
+
+#define MPP17_GPIO17		MPP(17, 0x0, 1, 1)
+#define MPP17_AC97_SYSCLK_OUT	MPP(17, 0x1, 0, 0)
+#define MPP17_UA3_CTSn		MPP(17, 0x2, 0, 0)
+#define MPP17_SDIO0_WP		MPP(17, 0x3, 0, 0)
+#define MPP17_TW_SDA2		MPP(17, 0x4, 0, 0)
+#define MPP17_AC97_SDATA_IN2	MPP(17, 0x5, 0, 0)
+
+#define MPP18_GPIO18		MPP(18, 0x0, 1, 1)
+#define MPP18_UA3_TXD		MPP(18, 0x2, 0, 0)
+#define MPP18_SDIO0_BUS_POWER	MPP(18, 0x3, 0, 0)
+#define MPP18_LCD0_PWM		MPP(18, 0x4, 0, 0)
+#define MPP18_AC_SDATA_IN3	MPP(18, 0x5, 0, 0)
+
+#define MPP19_GPIO19		MPP(19, 0x0, 1, 1)
+#define MPP19_UA3_RXD		MPP(19, 0x2, 0, 0)
+#define MPP19_SDIO0_LED_CTRL	MPP(19, 0x3, 0, 0)
+#define MPP19_TW_SCK2		MPP(19, 0x4, 0, 0)
+
+#define MPP20_GPIO20		MPP(20, 0x0, 1, 1)
+#define MPP20_AC97_SYSCLK_OUT	MPP(20, 0x1, 0, 0)
+#define MPP20_SPI_LCD_MISO	MPP(20, 0x2, 0, 0)
+#define MPP20_SDIO1_CD		MPP(20, 0x3, 0, 0)
+#define MPP20_SDIO0_CD		MPP(20, 0x5, 0, 0)
+#define MPP20_SPI_1_MISO	MPP(20, 0x6, 0, 0)
+
+#define MPP21_GPIO21		MPP(21, 0x0, 1, 1)
+#define MPP21_UA1_RTSn		MPP(21, 0x1, 0, 0)
+#define MPP21_SPI_LCD_CS0	MPP(21, 0x2, 0, 0)
+#define MPP21_SDIO1_WP		MPP(21, 0x3, 0, 0)
+#define MPP21_SSP_SFRM		MPP(21, 0x4, 0, 0)
+#define MPP21_SDIO0_WP		MPP(21, 0x5, 0, 0)
+#define MPP21_SPI_1_CS		MPP(21, 0x6, 0, 0)
+
+#define MPP22_GPIO22		MPP(22, 0x0, 1, 1)
+#define MPP22_UA1_CTSn		MPP(22, 0x1, 0, 0)
+#define MPP22_SPI_LCD_MOSI	MPP(22, 0x2, 0, 0)
+#define MPP22_SDIO1_BUS_POWER	MPP(22, 0x3, 0, 0)
+#define MPP22_SSP_TXD		MPP(22, 0x4, 0, 0)
+#define MPP22_SDIO0_BUS_POWER	MPP(22, 0x5, 0, 0)
+#define MPP22_SPI_1_MOSI	MPP(22, 0x6, 0, 0)
+
+#define MPP23_GPIO23		MPP(23, 0x0, 1, 1)
+#define MPP23_SPI_LCD_SCK	MPP(23, 0x2, 0, 0)
+#define MPP23_SDIO1_LED_CTRL	MPP(23, 0x3, 0, 0)
+#define MPP23_SSP_SCLK		MPP(23, 0x4, 0, 0)
+#define MPP23_SDIO0_LED_CTRL	MPP(23, 0x5, 0, 0)
+#define MPP23_SPI_1_SCK		MPP(23, 0x6, 0, 0)
+
+#define MPP_MAX			23
+
+#define MPP_GRP(_grp, _mode)	MPP((_grp), (_mode), 0, 0)
 
 /* for MPP groups _num is a group index */
 enum dove_mpp_grp_idx {
@@ -181,40 +153,44 @@ enum dove_mpp_grp_idx {
 	MPP_46_51 = 1,
 	MPP_58_61 = 5,
 	MPP_62_63 = 4,
+	MPP_GRP_MAX = 5,
 };
 
-#define MPP24_39_GPIO		MPP_GRP(MPP_24_39, 0x1)
-#define MPP24_39_CAM		MPP_GRP(MPP_24_39, 0x0)
+#define MPP_GRP_24_39_GPIO		MPP_GRP(MPP_24_39, 0x1)
+#define MPP_GRP_24_39_CAM		MPP_GRP(MPP_24_39, 0x0)
 
-#define MPP40_45_GPIO		MPP_GRP(MPP_40_45, 0x1)
-#define MPP40_45_SD0		MPP_GRP(MPP_40_45, 0x0)
+#define MPP_GRP_40_45_GPIO		MPP_GRP(MPP_40_45, 0x1)
+#define MPP_GRP_40_45_SD0		MPP_GRP(MPP_40_45, 0x0)
 
-#define MPP46_51_GPIO		MPP_GRP(MPP_46_51, 0x1)
-#define MPP46_51_SD1		MPP_GRP(MPP_46_51, 0x0)
+#define MPP_GRP_46_51_GPIO		MPP_GRP(MPP_46_51, 0x1)
+#define MPP_GRP_46_51_SD1		MPP_GRP(MPP_46_51, 0x0)
 
-#define MPP58_61_GPIO		MPP_GRP(MPP_58_61, 0x1)
-#define MPP58_61_SPI		MPP_GRP(MPP_58_61, 0x0)
+#define MPP_GRP_58_61_GPIO		MPP_GRP(MPP_58_61, 0x1)
+#define MPP_GRP_58_61_SPI		MPP_GRP(MPP_58_61, 0x0)
 
-#define MPP62_63_GPIO		MPP_GRP(MPP_62_63, 0x1)
-#define MPP62_63_UA1		MPP_GRP(MPP_62_63, 0x0)
+#define MPP_GRP_62_63_GPIO		MPP_GRP(MPP_62_63, 0x1)
+#define MPP_GRP_62_63_UA1		MPP_GRP(MPP_62_63, 0x0)
 
 /* The MPP[64:71] control differs from other groups */
-#define MPP64_71_GPO		MPP_GRP_NFC(0x1)
-#define MPP64_71_NFC		MPP_GRP_NFC(0x0)
+#define MPP_GRP_NFC_64_71_GPO		0x1
+#define MPP_GRP_NFC_64_71_NFC		0x0
 
 /*
  * The MPP[52:57] functionality is encoded by 4 bits in different
  * registers. The _num field in this case encodes those bits in
  * correspodence with Table 135 of 88AP510 Functional specification
  */
-#define MPP52_57_AU1		MPP_GRP_AU1(0x0)
-#define MPP52_57_AU1_GPIO57	MPP_GRP_AU1(0x2)
-#define MPP52_57_GPIO		MPP_GRP_AU1(0xa)
-#define MPP52_57_TW_GPIO	MPP_GRP_AU1(0xb)
-#define MPP52_57_AU1_SSP	MPP_GRP_AU1(0xc)
-#define MPP52_57_SSP_GPIO	MPP_GRP_AU1(0xe)
-#define MPP52_57_SSP_TW		MPP_GRP_AU1(0xf)
-
-void dove_mpp_conf(unsigned int *mpp_list);
+#define MPP_GRP_AU1_52_57_AU1		0x0
+#define MPP_GRP_AU1_52_57_AU1_GPIO57	0x2
+#define MPP_GRP_AU1_52_57_GPIO		0xa
+#define MPP_GRP_AU1_52_57_TW_GPIO	0xb
+#define MPP_GRP_AU1_52_57_AU1_SSP	0xc
+#define MPP_GRP_AU1_52_57_SSP_GPIO	0xe
+#define MPP_GRP_AU1_52_57_SSP_TW	0xf
+
+void dove_mpp_conf(unsigned int *mpp_list,
+		   unsigned int *mpp_grp_list,
+		   unsigned int grp_au1_52_57,
+		   unsigned int grp_nfc_64_71);
 
 #endif	/* __ARCH_DOVE_MPP_CODED_H */

arch/arm/mach-ep93xx/gpio.c

@@ -356,29 +356,6 @@ static int ep93xx_gpio_set_debounce(struct gpio_chip *chip,
 	return 0;
 }
 
-static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
-{
-	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
-	u8 data_reg, data_dir_reg;
-	int gpio, i;
-
-	data_reg = __raw_readb(ep93xx_chip->data_reg);
-	data_dir_reg = __raw_readb(ep93xx_chip->data_dir_reg);
-
-	gpio = ep93xx_chip->chip.base;
-	for (i = 0; i < chip->ngpio; i++, gpio++) {
-		int is_out = data_dir_reg & (1 << i);
-		int irq = gpio_to_irq(gpio);
-
-		seq_printf(s, " %s%d gpio-%-3d (%-12s) %s %s %s\n",
-				chip->label, i, gpio,
-				gpiochip_is_requested(chip, i) ? : "",
-				is_out ? "out" : "in ",
-				(data_reg & (1<<  i)) ? "hi" : "lo",
-				(!is_out && irq>= 0) ? "(interrupt)" : "");
-	}
-}
-
 #define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio)			\
 	{								\
 		.chip = {						\
@@ -387,7 +364,6 @@ static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 			.direction_output = ep93xx_gpio_direction_output, \
 			.get		  = ep93xx_gpio_get,		\
 			.set		  = ep93xx_gpio_set,		\
-			.dbg_show	  = ep93xx_gpio_dbg_show,	\
 			.base		  = base_gpio,			\
 			.ngpio		  = 8,				\
 		},							\

arch/arm/mach-exynos4/include/mach/smp.h

@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/smp.h
- *
- * Cloned from arch/arm/mach-realview/include/mach/smp.h
-*/
-
-#ifndef ASM_ARCH_SMP_H
-#define ASM_ARCH_SMP_H __FILE__
-
-#include <asm/hardware/gic.h>
-
-/*
- * We use IRQ1 as the IPI
- */
-static inline void smp_cross_call(const struct cpumask *mask, int ipi)
-{
-	gic_raise_softirq(mask, ipi);
-}
-
-#endif

arch/arm/mach-exynos4/irq-combiner.c

@@ -59,8 +59,7 @@ static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
 	unsigned int cascade_irq, combiner_irq;
 	unsigned long status;
 
-	/* primary controller ack'ing */
-	chip->irq_ack(&desc->irq_data);
+	chained_irq_enter(chip, desc);
 
 	spin_lock(&irq_controller_lock);
 	status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
@@ -79,8 +78,7 @@ static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
 		generic_handle_irq(cascade_irq);
 
  out:
-	/* primary controller unmasking */
-	chip->irq_unmask(&desc->irq_data);
+	chained_irq_exit(chip, desc);
 }
 
 static struct irq_chip combiner_chip = {

arch/arm/mach-exynos4/platsmp.c

@@ -22,6 +22,7 @@
 #include <linux/io.h>
 
 #include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
 #include <asm/smp_scu.h>
 #include <asm/unified.h>
 
@@ -104,7 +105,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * the boot monitor to read the system wide flags register,
 	 * and branch to the address found there.
 	 */
-	smp_cross_call(cpumask_of(cpu), 1);
+	gic_raise_softirq(cpumask_of(cpu), 1);
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
@@ -147,6 +148,8 @@ void __init smp_init_cpus(void)
 
 	for (i = 0; i < ncores; i++)
 		set_cpu_possible(i, true);
+
+	set_smp_cross_call(gic_raise_softirq);
 }
 
 void __init platform_smp_prepare_cpus(unsigned int max_cpus)

arch/arm/mach-gemini/include/mach/uncompress.h

@@ -16,7 +16,7 @@
 #include <linux/serial_reg.h>
 #include <mach/hardware.h>
 
-static volatile unsigned long *UART = (unsigned long *)GEMINI_UART_BASE;
+static volatile unsigned long * const UART = (unsigned long *)GEMINI_UART_BASE;
 
 /*
  * The following code assumes the serial port has already been

arch/arm/mach-h720x/include/mach/memory.h

@@ -13,7 +13,6 @@
  * There should not be more than (0xd0000000 - 0xc0000000)
  * bytes of RAM.
  */
-#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_256M - 1)
-#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_256M)
+#define ARM_DMA_ZONE_SIZE	SZ_256M
 
 #endif

arch/arm/mach-imx/Kconfig

@@ -1,5 +1,15 @@
 config IMX_HAVE_DMA_V1
 	bool
+#
+# ARCH_MX31 and ARCH_MX35 are left for compatibility
+# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
+# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
+# more sensible) names are used: SOC_IMX31 and SOC_IMX35
+config ARCH_MX31
+	bool
+
+config ARCH_MX35
+	bool
 
 config SOC_IMX1
 	bool
@@ -31,6 +41,24 @@ config SOC_IMX27
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
 
+config SOC_IMX31
+	bool
+	select CPU_V6
+	select IMX_HAVE_PLATFORM_MXC_RNGA
+	select ARCH_MXC_AUDMUX_V2
+	select ARCH_MX31
+	select MXC_AVIC
+
+config SOC_IMX35
+	bool
+	select CPU_V6
+	select ARCH_MXC_IOMUX_V3
+	select ARCH_MXC_AUDMUX_V2
+	select HAVE_EPIT
+	select ARCH_MX35
+	select MXC_AVIC
+
+
 if ARCH_MX1
 
 comment "MX1 platforms:"
@@ -40,6 +68,7 @@ config MACH_MXLADS
 config ARCH_MX1ADS
 	bool "MX1ADS platform"
 	select MACH_MXLADS
+	select SOC_IMX1
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	help
@@ -51,6 +80,13 @@ config MACH_SCB9328
 	help
 	  Say Y here if you are using a Synertronixx scb9328 board
 
+config MACH_APF9328
+	bool "APF9328"
+	select SOC_IMX1
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Say Yes here if you are using the Armadeus APF9328 development board
+
 endif
 
 if ARCH_MX2
@@ -129,6 +165,7 @@ choice
 
 config MACH_EUKREA_MBIMXSD25_BASEBOARD
 	bool "Eukrea MBIMXSD development board"
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	help
 	  This adds board specific devices that can be found on Eukrea's
@@ -254,6 +291,7 @@ config MACH_MX27_3DS
 config MACH_IMX27_VISSTRIM_M10
 	bool "Vista Silicon i.MX27 Visstrim_m10"
 	select SOC_IMX27
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
@@ -314,3 +352,251 @@ config MACH_IMX27IPCAM
 	  configurations for the board and its peripherals.
 
 endif
+
+if ARCH_MX3
+
+comment "MX31 platforms:"
+
+config MACH_MX31ADS
+	bool "Support MX31ADS platforms"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	default y
+	help
+	  Include support for MX31ADS platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX31ADS_WM1133_EV1
+	bool "Support Wolfson Microelectronics 1133-EV1 module"
+	depends on MACH_MX31ADS
+	depends on MFD_WM8350_I2C
+	depends on REGULATOR_WM8350
+	select MFD_WM8350_CONFIG_MODE_0
+	select MFD_WM8352_CONFIG_MODE_0
+	help
+	  Include support for the Wolfson Microelectronics 1133-EV1 PMU
+	  and audio module for the MX31ADS platform.
+
+config MACH_MX31LILLY
+	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for mx31 based LILLY1131 modules. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_MX31LITE
+	bool "Support MX31 LITEKIT (LogicPD)"
+	select SOC_IMX31
+	select MXC_ULPI if USB_ULPI
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_RTC
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Include support for MX31 LITEKIT platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_PCM037
+	bool "Support Phytec pcm037 (i.MX31) platforms"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_W1
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for Phytec pcm037 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_PCM037_EET
+	bool "Support pcm037 EET board extensions"
+	depends on MACH_PCM037
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Add support for PCM037 EET baseboard extensions. If you are using the
+	  OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
+	  command-line parameter.
+
+config MACH_MX31_3DS
+	bool "Support MX31PDK (3DS)"
+	select SOC_IMX31
+	select MXC_DEBUG_BOARD
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for MX31PDK (3DS) platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX31_3DS_MXC_NAND_USE_BBT
+	bool "Make the MXC NAND driver use the in flash Bad Block Table"
+	depends on MACH_MX31_3DS
+	depends on MTD_NAND_MXC
+	help
+	  Enable this if you want that the MXC NAND driver uses the in flash
+	  Bad Block Table to know what blocks are bad instead of scanning the
+	  entire flash looking for bad block markers.
+
+config MACH_MX31MOBOARD
+	bool "Support mx31moboard platforms (EPFL Mobots group)"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for mx31moboard platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_QONG
+	bool "Support Dave/DENX QongEVB-LITE platform"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Include support for Dave/DENX QongEVB-LITE platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_ARMADILLO5X0
+	bool "Support Atmark Armadillo-500 Development Base Board"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for Atmark Armadillo-500 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_KZM_ARM11_01
+	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Include support for KZM-ARM11-01. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_BUG
+	bool "Support Buglabs BUGBase platform"
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_IMX_UART
+	default y
+	help
+	  Include support for BUGBase 1.3 platform. This includes specific
+	  configurations for the board and its peripherals.
+
+comment "MX35 platforms:"
+
+config MACH_PCM043
+	bool "Support Phytec pcm043 (i.MX35) platforms"
+	select SOC_IMX35
+	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for Phytec pcm043 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_MX35_3DS
+	bool "Support MX35PDK platform"
+	select SOC_IMX35
+	select MXC_DEBUG_BOARD
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	help
+	  Include support for MX35PDK platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_EUKREA_CPUIMX35
+	bool "Support Eukrea CPUIMX35 Platform"
+	select SOC_IMX35
+	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for Eukrea CPUIMX35 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX35
+	default MACH_EUKREA_MBIMXSD35_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD35_BASEBOARD
+	bool "Eukrea MBIMXSD development board"
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMXSD evaluation board.
+
+endchoice
+
+config MACH_VPR200
+	bool "Support VPR200 platform"
+	select SOC_IMX35
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	help
+	  Include support for VPR200 platform. This includes specific
+	  configurations for the board and its peripherals.
+
+endif

arch/arm/mach-imx/Makefile

@@ -1,9 +1,3 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
 obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o
 
 obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
@@ -14,18 +8,27 @@ obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o ehci-imx25.o
 obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o
 obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
 
+obj-$(CONFIG_SOC_IMX31) += mm-imx31.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx35.o cpu-imx35.o clock-imx35.o ehci-imx35.o
+obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
+
 # Support for CMOS sensor interface
-obj-$(CONFIG_MX1_VIDEO)	+= mx1-camera-fiq.o mx1-camera-fiq-ksym.o
+obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
 
+# i.MX1 based machines
 obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
 obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
+obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o
 
+# i.MX21 based machines
 obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
 
+# i.MX25 based machines
 obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-eukrea_cpuimx25.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
 
+# i.MX27 based machines
 obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
 obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
@@ -37,3 +40,24 @@ obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
 obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
 obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
 obj-$(CONFIG_MACH_IMX27IPCAM) += mach-imx27ipcam.o
+
+# i.MX31 based machines
+obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o
+obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o
+obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o
+obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o
+obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o
+obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \
+		mx31moboard-marxbot.o mx31moboard-smartbot.o
+obj-$(CONFIG_MACH_QONG) += mach-qong.o
+obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
+obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
+obj-$(CONFIG_MACH_BUG) += mach-bug.o
+
+# i.MX35 based machines
+obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
+obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
+obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o

arch/arm/mach-imx/Makefile.boot

@@ -13,3 +13,7 @@ initrd_phys-$(CONFIG_ARCH_MX25)	:= 0x80800000
 zreladdr-$(CONFIG_MACH_MX27)	:= 0xA0008000
 params_phys-$(CONFIG_MACH_MX27)	:= 0xA0000100
 initrd_phys-$(CONFIG_MACH_MX27)	:= 0xA0800000
+
+zreladdr-$(CONFIG_ARCH_MX3)	:= 0x80008000
+params_phys-$(CONFIG_ARCH_MX3)	:= 0x80000100
+initrd_phys-$(CONFIG_ARCH_MX3)	:= 0x80800000

arch/arm/mach-imx/cache-l2x0.c

@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Sascha Hauer <s.hauer@pengutronix.de>
+ * Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+
+#include <asm/hardware/cache-l2x0.h>
+
+#include <mach/hardware.h>
+
+static int mxc_init_l2x0(void)
+{
+	void __iomem *l2x0_base;
+	void __iomem *clkctl_base;
+
+	if (!cpu_is_mx31() && !cpu_is_mx35())
+		return 0;
+
+/*
+ * First of all, we must repair broken chip settings. There are some
+ * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
+ * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
+ * Workaraound is to setup the correct register setting prior enabling the
+ * L2 cache. This should not hurt already working CPUs, as they are using the
+ * same value.
+ */
+#define L2_MEM_VAL 0x10
+
+	clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
+	if (clkctl_base != NULL) {
+		writel(0x00000515, clkctl_base + L2_MEM_VAL);
+		iounmap(clkctl_base);
+	} else {
+		pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
+	}
+
+	l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
+	if (IS_ERR(l2x0_base)) {
+		printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
+				PTR_ERR(l2x0_base));
+		return 0;
+	}
+
+	l2x0_init(l2x0_base, 0x00030024, 0x00000000);
+
+	return 0;
+}
+arch_initcall(mxc_init_l2x0);

arch/arm/mach-mx3/clock-imx31.c → arch/arm/mach-imx/clock-imx31.c

@@ -32,7 +32,7 @@
 #include <mach/mx31.h>
 #include <mach/common.h>
 
-#include "crm_regs.h"
+#include "crmregs-imx31.h"
 
 #define PRE_DIV_MIN_FREQ    10000000 /* Minimum Frequency after Predivider */
 
@@ -627,4 +627,3 @@ int __init mx31_clocks_init(unsigned long fref)
 
 	return 0;
 }
-

arch/arm/mach-mx3/clock-imx35.c → arch/arm/mach-imx/clock-imx35.c

@@ -547,4 +547,3 @@ int __init mx35_clocks_init()
 
 	return 0;
 }
-

arch/arm/mach-mx3/cpu.c → arch/arm/mach-imx/cpu-imx31.c

@@ -1,5 +1,5 @@
 /*
- * MX3 CPU type detection
+ * MX31 CPU type detection
  *
  * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
  *
@@ -17,14 +17,12 @@
 unsigned int mx31_cpu_rev;
 EXPORT_SYMBOL(mx31_cpu_rev);
 
-struct mx3_cpu_type {
+static struct {
 	u8 srev;
 	const char *name;
 	const char *v;
 	unsigned int rev;
-};
-
-static struct mx3_cpu_type mx31_cpu_type[] __initdata = {
+} mx31_cpu_type[] __initdata = {
 	{ .srev = 0x00, .name = "i.MX31(L)", .v = "1.0",  .rev = IMX_CHIP_REVISION_1_0	},
 	{ .srev = 0x10, .name = "i.MX31",    .v = "1.1",  .rev = IMX_CHIP_REVISION_1_1	},
 	{ .srev = 0x11, .name = "i.MX31L",   .v = "1.1",  .rev = IMX_CHIP_REVISION_1_1	},
@@ -57,33 +55,3 @@ void __init mx31_read_cpu_rev(void)
 
 	printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev);
 }
-
-unsigned int mx35_cpu_rev;
-EXPORT_SYMBOL(mx35_cpu_rev);
-
-void __init mx35_read_cpu_rev(void)
-{
-	u32 rev;
-	char *srev;
-
-	rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
-	switch (rev) {
-	case 0x00:
-		mx35_cpu_rev = IMX_CHIP_REVISION_1_0;
-		srev = "1.0";
-		break;
-	case 0x10:
-		mx35_cpu_rev = IMX_CHIP_REVISION_2_0;
-		srev = "2.0";
-		break;
-	case 0x11:
-		mx35_cpu_rev = IMX_CHIP_REVISION_2_1;
-		srev = "2.1";
-		break;
-	default:
-		mx35_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
-		srev = "unknown";
-	}
-
-	printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev);
-}

arch/arm/mach-imx/cpu-imx35.c

@@ -0,0 +1,44 @@
+/*
+ * MX35 CPU type detection
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/iim.h>
+
+unsigned int mx35_cpu_rev;
+EXPORT_SYMBOL(mx35_cpu_rev);
+
+void __init mx35_read_cpu_rev(void)
+{
+	u32 rev;
+	char *srev;
+
+	rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
+	switch (rev) {
+	case 0x00:
+		mx35_cpu_rev = IMX_CHIP_REVISION_1_0;
+		srev = "1.0";
+		break;
+	case 0x10:
+		mx35_cpu_rev = IMX_CHIP_REVISION_2_0;
+		srev = "2.0";
+		break;
+	case 0x11:
+		mx35_cpu_rev = IMX_CHIP_REVISION_2_1;
+		srev = "2.1";
+		break;
+	default:
+		mx35_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
+		srev = "unknown";
+	}
+
+	printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev);
+}

arch/arm/mach-imx/devices-imx1.h

@@ -9,21 +9,21 @@
 #include <mach/mx1.h>
 #include <mach/devices-common.h>
 
-extern const struct imx_imx_fb_data imx1_imx_fb_data __initconst;
+extern const struct imx_imx_fb_data imx1_imx_fb_data;
 #define imx1_add_imx_fb(pdata) \
     imx_add_imx_fb(&imx1_imx_fb_data, pdata)
 
-extern const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst;
+extern const struct imx_imx_i2c_data imx1_imx_i2c_data;
 #define imx1_add_imx_i2c(pdata)		\
 	imx_add_imx_i2c(&imx1_imx_i2c_data, pdata)
 
-extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[];
 #define imx1_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_3irq(&imx1_imx_uart_data[id], pdata)
 #define imx1_add_imx_uart0(pdata)	imx1_add_imx_uart(0, pdata)
 #define imx1_add_imx_uart1(pdata)	imx1_add_imx_uart(1, pdata)
 
-extern const struct imx_spi_imx_data imx1_cspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx1_cspi_data[];
 #define imx1_add_cspi(id, pdata)   \
 	imx_add_spi_imx(&imx1_cspi_data[id], pdata)
 

arch/arm/mach-imx/devices-imx21.h

@@ -9,31 +9,31 @@
 #include <mach/mx21.h>
 #include <mach/devices-common.h>
 
-extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data __initconst;
+extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data;
 #define imx21_add_imx21_hcd(pdata)	\
 	imx_add_imx21_hcd(&imx21_imx21_hcd_data, pdata)
 
-extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst;
+extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data;
 #define imx21_add_imx2_wdt(pdata)	\
 	imx_add_imx2_wdt(&imx21_imx2_wdt_data)
 
-extern const struct imx_imx_fb_data imx21_imx_fb_data __initconst;
+extern const struct imx_imx_fb_data imx21_imx_fb_data;
 #define imx21_add_imx_fb(pdata)	\
 	imx_add_imx_fb(&imx21_imx_fb_data, pdata)
 
-extern const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst;
+extern const struct imx_imx_i2c_data imx21_imx_i2c_data;
 #define imx21_add_imx_i2c(pdata)	\
 	imx_add_imx_i2c(&imx21_imx_i2c_data, pdata)
 
-extern const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst;
+extern const struct imx_imx_keypad_data imx21_imx_keypad_data;
 #define imx21_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx21_imx_keypad_data, pdata)
 
-extern const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst;
+extern const struct imx_imx_ssi_data imx21_imx_ssi_data[];
 #define imx21_add_imx_ssi(id, pdata)	\
 	imx_add_imx_ssi(&imx21_imx_ssi_data[id], pdata)
 
-extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[];
 #define imx21_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx21_imx_uart_data[id], pdata)
 #define imx21_add_imx_uart0(pdata)	imx21_add_imx_uart(0, pdata)
@@ -41,19 +41,19 @@ extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst;
 #define imx21_add_imx_uart2(pdata)	imx21_add_imx_uart(2, pdata)
 #define imx21_add_imx_uart3(pdata)	imx21_add_imx_uart(3, pdata)
 
-extern const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst;
+extern const struct imx_mxc_mmc_data imx21_mxc_mmc_data[];
 #define imx21_add_mxc_mmc(id, pdata)	\
 	imx_add_mxc_mmc(&imx21_mxc_mmc_data[id], pdata)
 
-extern const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst;
+extern const struct imx_mxc_nand_data imx21_mxc_nand_data;
 #define imx21_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx21_mxc_nand_data, pdata)
 
-extern const struct imx_mxc_w1_data imx21_mxc_w1_data __initconst;
+extern const struct imx_mxc_w1_data imx21_mxc_w1_data;
 #define imx21_add_mxc_w1(pdata)	\
 	imx_add_mxc_w1(&imx21_mxc_w1_data)
 
-extern const struct imx_spi_imx_data imx21_cspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx21_cspi_data[];
 #define imx21_add_cspi(id, pdata)	\
 	imx_add_spi_imx(&imx21_cspi_data[id], pdata)
 #define imx21_add_spi_imx0(pdata)	imx21_add_cspi(0, pdata)

arch/arm/mach-imx/devices-imx25.h

@@ -9,48 +9,48 @@
 #include <mach/mx25.h>
 #include <mach/devices-common.h>
 
-extern const struct imx_fec_data imx25_fec_data __initconst;
+extern const struct imx_fec_data imx25_fec_data;
 #define imx25_add_fec(pdata)	\
 	imx_add_fec(&imx25_fec_data, pdata)
 
-extern const struct imx_flexcan_data imx25_flexcan_data[] __initconst;
+extern const struct imx_flexcan_data imx25_flexcan_data[];
 #define imx25_add_flexcan(id, pdata)	\
 	imx_add_flexcan(&imx25_flexcan_data[id], pdata)
 #define imx25_add_flexcan0(pdata)	imx25_add_flexcan(0, pdata)
 #define imx25_add_flexcan1(pdata)	imx25_add_flexcan(1, pdata)
 
-extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst;
+extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data;
 #define imx25_add_fsl_usb2_udc(pdata)	\
 	imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata)
 
-extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data __initconst;
+extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data;
 #define imx25_add_imxdi_rtc(pdata)	\
 	imx_add_imxdi_rtc(&imx25_imxdi_rtc_data)
 
-extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data __initconst;
+extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data;
 #define imx25_add_imx2_wdt(pdata)	\
 	imx_add_imx2_wdt(&imx25_imx2_wdt_data)
 
-extern const struct imx_imx_fb_data imx25_imx_fb_data __initconst;
+extern const struct imx_imx_fb_data imx25_imx_fb_data;
 #define imx25_add_imx_fb(pdata)	\
 	imx_add_imx_fb(&imx25_imx_fb_data, pdata)
 
-extern const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx25_imx_i2c_data[];
 #define imx25_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata)
 #define imx25_add_imx_i2c0(pdata)	imx25_add_imx_i2c(0, pdata)
 #define imx25_add_imx_i2c1(pdata)	imx25_add_imx_i2c(1, pdata)
 #define imx25_add_imx_i2c2(pdata)	imx25_add_imx_i2c(2, pdata)
 
-extern const struct imx_imx_keypad_data imx25_imx_keypad_data __initconst;
+extern const struct imx_imx_keypad_data imx25_imx_keypad_data;
 #define imx25_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx25_imx_keypad_data, pdata)
 
-extern const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst;
+extern const struct imx_imx_ssi_data imx25_imx_ssi_data[];
 #define imx25_add_imx_ssi(id, pdata)	\
 	imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata)
 
-extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[];
 #define imx25_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata)
 #define imx25_add_imx_uart0(pdata)	imx25_add_imx_uart(0, pdata)
@@ -59,33 +59,32 @@ extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst;
 #define imx25_add_imx_uart3(pdata)	imx25_add_imx_uart(3, pdata)
 #define imx25_add_imx_uart4(pdata)	imx25_add_imx_uart(4, pdata)
 
-extern const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst;
+extern const struct imx_mx2_camera_data imx25_mx2_camera_data;
 #define imx25_add_mx2_camera(pdata)	\
 	imx_add_mx2_camera(&imx25_mx2_camera_data, pdata)
 
-extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data __initconst;
+extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data;
 #define imx25_add_mxc_ehci_otg(pdata)	\
 	imx_add_mxc_ehci(&imx25_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data __initconst;
+extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data;
 #define imx25_add_mxc_ehci_hs(pdata)	\
 	imx_add_mxc_ehci(&imx25_mxc_ehci_hs_data, pdata)
 
-extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst;
+extern const struct imx_mxc_nand_data imx25_mxc_nand_data;
 #define imx25_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
 
-extern const struct imx_sdhci_esdhc_imx_data
-imx25_sdhci_esdhc_imx_data[] __initconst;
+extern const struct imx_sdhci_esdhc_imx_data imx25_sdhci_esdhc_imx_data[];
 #define imx25_add_sdhci_esdhc_imx(id, pdata)	\
 	imx_add_sdhci_esdhc_imx(&imx25_sdhci_esdhc_imx_data[id], pdata)
 
-extern const struct imx_spi_imx_data imx25_cspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx25_cspi_data[];
 #define imx25_add_spi_imx(id, pdata)	\
 	imx_add_spi_imx(&imx25_cspi_data[id], pdata)
 #define imx25_add_spi_imx0(pdata)	imx25_add_spi_imx(0, pdata)
 #define imx25_add_spi_imx1(pdata)	imx25_add_spi_imx(1, pdata)
 #define imx25_add_spi_imx2(pdata)	imx25_add_spi_imx(2, pdata)
 
-extern struct imx_mxc_pwm_data imx25_mxc_pwm_data[] __initconst;
+extern struct imx_mxc_pwm_data imx25_mxc_pwm_data[];
 #define imx25_add_mxc_pwm(id)	\
 	imx_add_mxc_pwm(&imx25_mxc_pwm_data[id])

arch/arm/mach-imx/devices-imx27.h

@@ -9,35 +9,35 @@
 #include <mach/mx27.h>
 #include <mach/devices-common.h>
 
-extern const struct imx_fec_data imx27_fec_data __initconst;
+extern const struct imx_fec_data imx27_fec_data;
 #define imx27_add_fec(pdata)	\
 	imx_add_fec(&imx27_fec_data, pdata)
 
-extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst;
+extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data;
 #define imx27_add_fsl_usb2_udc(pdata)	\
 	imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata)
 
-extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst;
+extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data;
 #define imx27_add_imx2_wdt(pdata)	\
 	imx_add_imx2_wdt(&imx27_imx2_wdt_data)
 
-extern const struct imx_imx_fb_data imx27_imx_fb_data __initconst;
+extern const struct imx_imx_fb_data imx27_imx_fb_data;
 #define imx27_add_imx_fb(pdata)	\
 	imx_add_imx_fb(&imx27_imx_fb_data, pdata)
 
-extern const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx27_imx_i2c_data[];
 #define imx27_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx27_imx_i2c_data[id], pdata)
 
-extern const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst;
+extern const struct imx_imx_keypad_data imx27_imx_keypad_data;
 #define imx27_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx27_imx_keypad_data, pdata)
 
-extern const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst;
+extern const struct imx_imx_ssi_data imx27_imx_ssi_data[];
 #define imx27_add_imx_ssi(id, pdata)    \
 	imx_add_imx_ssi(&imx27_imx_ssi_data[id], pdata)
 
-extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[];
 #define imx27_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx27_imx_uart_data[id], pdata)
 #define imx27_add_imx_uart0(pdata)	imx27_add_imx_uart(0, pdata)
@@ -47,30 +47,30 @@ extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst;
 #define imx27_add_imx_uart4(pdata)	imx27_add_imx_uart(4, pdata)
 #define imx27_add_imx_uart5(pdata)	imx27_add_imx_uart(5, pdata)
 
-extern const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst;
+extern const struct imx_mx2_camera_data imx27_mx2_camera_data;
 #define imx27_add_mx2_camera(pdata)	\
 	imx_add_mx2_camera(&imx27_mx2_camera_data, pdata)
 
-extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst;
+extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data;
 #define imx27_add_mxc_ehci_otg(pdata)	\
 	imx_add_mxc_ehci(&imx27_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[] __initconst;
+extern const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[];
 #define imx27_add_mxc_ehci_hs(id, pdata)	\
 	imx_add_mxc_ehci(&imx27_mxc_ehci_hs_data[id - 1], pdata)
 
-extern const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst;
+extern const struct imx_mxc_mmc_data imx27_mxc_mmc_data[];
 #define imx27_add_mxc_mmc(id, pdata)	\
 	imx_add_mxc_mmc(&imx27_mxc_mmc_data[id], pdata)
 
-extern const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst;
+extern const struct imx_mxc_nand_data imx27_mxc_nand_data;
 #define imx27_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx27_mxc_nand_data, pdata)
 
-extern const struct imx_mxc_w1_data imx27_mxc_w1_data __initconst;
+extern const struct imx_mxc_w1_data imx27_mxc_w1_data;
 #define imx27_add_mxc_w1(pdata)	\
 	imx_add_mxc_w1(&imx27_mxc_w1_data)
 
-extern const struct imx_spi_imx_data imx27_cspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx27_cspi_data[];
 #define imx27_add_cspi(id, pdata)	\
 	imx_add_spi_imx(&imx27_cspi_data[id], pdata)
 #define imx27_add_spi_imx0(pdata)	imx27_add_cspi(0, pdata)

arch/arm/mach-mx3/devices-imx31.h → arch/arm/mach-imx/devices-imx31.h

@@ -9,30 +9,30 @@
 #include <mach/mx31.h>
 #include <mach/devices-common.h>
 
-extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst;
+extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data;
 #define imx31_add_fsl_usb2_udc(pdata)	\
 	imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata)
 
-extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data __initconst;
+extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data;
 #define imx31_add_imx2_wdt(pdata)       \
 	imx_add_imx2_wdt(&imx31_imx2_wdt_data)
 
-extern const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx31_imx_i2c_data[];
 #define imx31_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata)
 #define imx31_add_imx_i2c0(pdata)	imx31_add_imx_i2c(0, pdata)
 #define imx31_add_imx_i2c1(pdata)	imx31_add_imx_i2c(1, pdata)
 #define imx31_add_imx_i2c2(pdata)	imx31_add_imx_i2c(2, pdata)
 
-extern const struct imx_imx_keypad_data imx31_imx_keypad_data __initconst;
+extern const struct imx_imx_keypad_data imx31_imx_keypad_data;
 #define imx31_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx31_imx_keypad_data, pdata)
 
-extern const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst;
+extern const struct imx_imx_ssi_data imx31_imx_ssi_data[];
 #define imx31_add_imx_ssi(id, pdata)    \
 	imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata)
 
-extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[];
 #define imx31_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx31_imx_uart_data[id], pdata)
 #define imx31_add_imx_uart0(pdata)	imx31_add_imx_uart(0, pdata)
@@ -41,26 +41,38 @@ extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst;
 #define imx31_add_imx_uart3(pdata)	imx31_add_imx_uart(3, pdata)
 #define imx31_add_imx_uart4(pdata)	imx31_add_imx_uart(4, pdata)
 
-extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data __initconst;
+extern const struct imx_ipu_core_data imx31_ipu_core_data;
+#define imx31_add_ipu_core(pdata)	\
+	imx_add_ipu_core(&imx31_ipu_core_data, pdata)
+#define imx31_alloc_mx3_camera(pdata)	\
+	imx_alloc_mx3_camera(&imx31_ipu_core_data, pdata)
+#define imx31_add_mx3_sdc_fb(pdata)	\
+	imx_add_mx3_sdc_fb(&imx31_ipu_core_data, pdata)
+
+extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data;
 #define imx31_add_mxc_ehci_otg(pdata)	\
 	imx_add_mxc_ehci(&imx31_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[] __initconst;
+extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[];
 #define imx31_add_mxc_ehci_hs(id, pdata)	\
 	imx_add_mxc_ehci(&imx31_mxc_ehci_hs_data[id - 1], pdata)
 
-extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst;
+extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[];
 #define imx31_add_mxc_mmc(id, pdata)	\
 	imx_add_mxc_mmc(&imx31_mxc_mmc_data[id], pdata)
 
-extern const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst;
+extern const struct imx_mxc_nand_data imx31_mxc_nand_data;
 #define imx31_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx31_mxc_nand_data, pdata)
 
-extern const struct imx_mxc_w1_data imx31_mxc_w1_data __initconst;
+extern const struct imx_mxc_rtc_data imx31_mxc_rtc_data;
+#define imx31_add_mxc_rtc(pdata)	\
+	imx_add_mxc_rtc(&imx31_mxc_rtc_data)
+
+extern const struct imx_mxc_w1_data imx31_mxc_w1_data;
 #define imx31_add_mxc_w1(pdata)	\
 	imx_add_mxc_w1(&imx31_mxc_w1_data)
 
-extern const struct imx_spi_imx_data imx31_cspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx31_cspi_data[];
 #define imx31_add_cspi(id, pdata)	\
 	imx_add_spi_imx(&imx31_cspi_data[id], pdata)
 #define imx31_add_spi_imx0(pdata)	imx31_add_cspi(0, pdata)

arch/arm/mach-mx3/devices-imx35.h → arch/arm/mach-imx/devices-imx35.h

@@ -9,67 +9,74 @@
 #include <mach/mx35.h>
 #include <mach/devices-common.h>
 
-extern const struct imx_fec_data imx35_fec_data __initconst;
+extern const struct imx_fec_data imx35_fec_data;
 #define imx35_add_fec(pdata)	\
 	imx_add_fec(&imx35_fec_data, pdata)
 
-extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst;
+extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data;
 #define imx35_add_fsl_usb2_udc(pdata)	\
 	imx_add_fsl_usb2_udc(&imx35_fsl_usb2_udc_data, pdata)
 
-extern const struct imx_flexcan_data imx35_flexcan_data[] __initconst;
+extern const struct imx_flexcan_data imx35_flexcan_data[];
 #define imx35_add_flexcan(id, pdata)	\
 	imx_add_flexcan(&imx35_flexcan_data[id], pdata)
 #define imx35_add_flexcan0(pdata)	imx35_add_flexcan(0, pdata)
 #define imx35_add_flexcan1(pdata)	imx35_add_flexcan(1, pdata)
 
-extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data __initconst;
+extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data;
 #define imx35_add_imx2_wdt(pdata)       \
 	imx_add_imx2_wdt(&imx35_imx2_wdt_data)
 
-extern const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst;
+extern const struct imx_imx_i2c_data imx35_imx_i2c_data[];
 #define imx35_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx35_imx_i2c_data[id], pdata)
 #define imx35_add_imx_i2c0(pdata)	imx35_add_imx_i2c(0, pdata)
 #define imx35_add_imx_i2c1(pdata)	imx35_add_imx_i2c(1, pdata)
 #define imx35_add_imx_i2c2(pdata)	imx35_add_imx_i2c(2, pdata)
 
-extern const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst;
+extern const struct imx_imx_keypad_data imx35_imx_keypad_data;
 #define imx35_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx35_imx_keypad_data, pdata)
 
-extern const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst;
+extern const struct imx_imx_ssi_data imx35_imx_ssi_data[];
 #define imx35_add_imx_ssi(id, pdata)    \
 	imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata)
 
-extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst;
+extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[];
 #define imx35_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx35_imx_uart_data[id], pdata)
 #define imx35_add_imx_uart0(pdata)	imx35_add_imx_uart(0, pdata)
 #define imx35_add_imx_uart1(pdata)	imx35_add_imx_uart(1, pdata)
 #define imx35_add_imx_uart2(pdata)	imx35_add_imx_uart(2, pdata)
 
-extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data __initconst;
+extern const struct imx_ipu_core_data imx35_ipu_core_data;
+#define imx35_add_ipu_core(pdata)	\
+	imx_add_ipu_core(&imx35_ipu_core_data, pdata)
+#define imx35_alloc_mx3_camera(pdata)	\
+	imx_alloc_mx3_camera(&imx35_ipu_core_data, pdata)
+#define imx35_add_mx3_sdc_fb(pdata)	\
+	imx_add_mx3_sdc_fb(&imx35_ipu_core_data, pdata)
+
+extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data;
 #define imx35_add_mxc_ehci_otg(pdata)	\
 	imx_add_mxc_ehci(&imx35_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst;
+extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data;
 #define imx35_add_mxc_ehci_hs(pdata)	\
 	imx_add_mxc_ehci(&imx35_mxc_ehci_hs_data, pdata)
 
-extern const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst;
+extern const struct imx_mxc_nand_data imx35_mxc_nand_data;
 #define imx35_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx35_mxc_nand_data, pdata)
 
-extern const struct imx_mxc_w1_data imx35_mxc_w1_data __initconst;
+extern const struct imx_mxc_w1_data imx35_mxc_w1_data;
 #define imx35_add_mxc_w1(pdata)	\
 	imx_add_mxc_w1(&imx35_mxc_w1_data)
 
-extern const struct imx_sdhci_esdhc_imx_data
-imx35_sdhci_esdhc_imx_data[] __initconst;
+extern const struct imx_sdhci_esdhc_imx_data imx35_sdhci_esdhc_imx_data[];
 #define imx35_add_sdhci_esdhc_imx(id, pdata)	\
 	imx_add_sdhci_esdhc_imx(&imx35_sdhci_esdhc_imx_data[id], pdata)
 
-extern const struct imx_spi_imx_data imx35_cspi_data[] __initconst;
+extern const struct imx_spi_imx_data imx35_cspi_data[];
 #define imx35_add_cspi(id, pdata)	\
 	imx_add_spi_imx(&imx35_cspi_data[id], pdata)
 #define imx35_add_spi_imx0(pdata)	imx35_add_cspi(0, pdata)

arch/arm/mach-mx3/ehci-imx31.c → arch/arm/mach-imx/ehci-imx31.c

@@ -80,4 +80,3 @@ int mx31_initialize_usb_hw(int port, unsigned int flags)
 
 	return 0;
 }
-

arch/arm/mach-mx3/ehci-imx35.c → arch/arm/mach-imx/ehci-imx35.c

@@ -77,4 +77,3 @@ int mx35_initialize_usb_hw(int port, unsigned int flags)
 
 	return 0;
 }
-

arch/arm/mach-imx/eukrea_mbimx27-baseboard.c

@@ -32,7 +32,6 @@
 #include <mach/common.h>
 #include <mach/iomux-mx27.h>
 #include <mach/hardware.h>
-#include <mach/spi.h>
 #include <mach/audmux.h>
 
 #include "devices-imx27.h"

arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c

@@ -22,7 +22,6 @@
 #include <linux/gpio.h>
 #include <linux/leds.h>
 #include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <video/platform_lcd.h>
 
@@ -32,9 +31,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/mx25.h>
-#include <mach/imx-uart.h>
 #include <mach/audmux.h>
-#include <mach/esdhc.h>
 
 #include "devices-imx25.h"
 
@@ -208,23 +205,14 @@ static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
 	},
 };
 
-static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
+static const struct gpio_keys_platform_data
+		eukrea_mbimxsd_button_data __initconst = {
 	.buttons	= eukrea_mbimxsd_gpio_buttons,
 	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
 };
 
-static struct platform_device eukrea_mbimxsd_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &eukrea_mbimxsd_button_data,
-	}
-};
-
 static struct platform_device *platform_devices[] __initdata = {
 	&eukrea_mbimxsd_leds_gpio,
-	&eukrea_mbimxsd_button_device,
 	&eukrea_mbimxsd_lcd_powerdev,
 };
 
@@ -299,4 +287,5 @@ void __init eukrea_mbimxsd25_baseboard_init(void)
 				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
 }

arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c → arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c

@@ -26,7 +26,6 @@
 #include <linux/interrupt.h>
 #include <linux/leds.h>
 #include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <video/platform_lcd.h>
 #include <linux/i2c.h>
@@ -38,15 +37,10 @@
 
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx35.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
 #include <mach/audmux.h>
-#include <mach/esdhc.h>
 
 #include "devices-imx35.h"
-#include "devices.h"
 
 static const struct fb_videomode fb_modedb[] = {
 	{
@@ -101,12 +95,11 @@ static const struct fb_videomode fb_modedb[] = {
 	},
 };
 
-static struct ipu_platform_data mx3_ipu_data = {
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
 
-static struct mx3fb_platform_data mx3fb_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
 	.name		= "CMO-QVGA",
 	.mode		= fb_modedb,
 	.num_modes	= ARRAY_SIZE(fb_modedb),
@@ -223,23 +216,14 @@ static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
 	},
 };
 
-static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
+static const struct gpio_keys_platform_data
+		eukrea_mbimxsd_button_data __initconst = {
 	.buttons	= eukrea_mbimxsd_gpio_buttons,
 	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
 };
 
-static struct platform_device eukrea_mbimxsd_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &eukrea_mbimxsd_button_data,
-	}
-};
-
 static struct platform_device *platform_devices[] __initdata = {
 	&eukrea_mbimxsd_leds_gpio,
-	&eukrea_mbimxsd_button_device,
 	&eukrea_mbimxsd_lcd_powerdev,
 };
 
@@ -292,8 +276,8 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
 #endif
 
 	imx35_add_imx_uart1(&uart_pdata);
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+	imx35_add_ipu_core(&mx3_ipu_data);
+	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
 
 	imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
 
@@ -315,4 +299,5 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
 				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
 }

arch/arm/mach-imx/mach-apf9328.c

@@ -0,0 +1,144 @@
+/*
+ * linux/arch/arm/mach-imx/mach-apf9328.c
+ *
+ * Copyright (c) 2005-2011 ARMadeus systems <support@armadeus.com>
+ *
+ * This work is based on mach-scb9328.c which is:
+ * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
+ * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/dm9000.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/iomux-mx1.h>
+
+#include "devices-imx1.h"
+
+static const int apf9328_pins[] __initconst = {
+	/* UART1 */
+	PC9_PF_UART1_CTS,
+	PC10_PF_UART1_RTS,
+	PC11_PF_UART1_TXD,
+	PC12_PF_UART1_RXD,
+	/* UART2 */
+	PB28_PF_UART2_CTS,
+	PB29_PF_UART2_RTS,
+	PB30_PF_UART2_TXD,
+	PB31_PF_UART2_RXD,
+};
+
+/*
+ * The APF9328 can have up to 32MB NOR Flash
+ */
+static struct resource flash_resource = {
+	.start	= MX1_CS0_PHYS,
+	.end	= MX1_CS0_PHYS + SZ_32M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data apf9328_flash_data = {
+	.width  = 2,
+};
+
+static struct platform_device apf9328_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev = {
+		.platform_data = &apf9328_flash_data,
+	},
+	.resource = &flash_resource,
+	.num_resources = 1,
+};
+
+/*
+ * APF9328 has a DM9000 Ethernet controller
+ */
+static struct dm9000_plat_data dm9000_setup = {
+	.flags          = DM9000_PLATF_16BITONLY
+};
+
+static struct resource dm9000_resources[] = {
+	{
+		.start  = MX1_CS4_PHYS + 0x00C00000,
+		.end    = MX1_CS4_PHYS + 0x00C00001,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = MX1_CS4_PHYS + 0x00C00002,
+		.end    = MX1_CS4_PHYS + 0x00C00003,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = IRQ_GPIOB(14),
+		.end    = IRQ_GPIOB(14),
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct platform_device dm9000x_device = {
+	.name		= "dm9000",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dm9000_resources),
+	.resource	= dm9000_resources,
+	.dev		= {
+		.platform_data = &dm9000_setup,
+	}
+};
+
+/* --- SERIAL RESSOURCE --- */
+static const struct imxuart_platform_data uart0_pdata __initconst = {
+	.flags = 0,
+};
+
+static const struct imxuart_platform_data uart1_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&apf9328_flash_device,
+	&dm9000x_device,
+};
+
+static void __init apf9328_init(void)
+{
+	mxc_gpio_setup_multiple_pins(apf9328_pins,
+			ARRAY_SIZE(apf9328_pins),
+			"APF9328");
+
+	imx1_add_imx_uart0(&uart0_pdata);
+	imx1_add_imx_uart1(&uart1_pdata);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init apf9328_timer_init(void)
+{
+	mx1_clocks_init(32768);
+}
+
+static struct sys_timer apf9328_timer = {
+	.init	= apf9328_timer_init,
+};
+
+MACHINE_START(APF9328, "Armadeus APF9328")
+	/* Maintainer: Gwenhael Goavec-Merou, ARMadeus Systems */
+	.map_io       = mx1_map_io,
+	.init_early   = imx1_init_early,
+	.init_irq     = mx1_init_irq,
+	.timer        = &apf9328_timer,
+	.init_machine = apf9328_init,
+MACHINE_END

arch/arm/mach-mx3/mach-armadillo5x0.c → arch/arm/mach-imx/mach-armadillo5x0.c

@@ -34,7 +34,6 @@
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
 #include <linux/input.h>
-#include <linux/gpio_keys.h>
 #include <linux/i2c.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
@@ -49,13 +48,10 @@
 
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
-#include "crm_regs.h"
+#include "crmregs-imx31.h"
 
 static int armadillo5x0_pins[] = {
 	/* UART1 */
@@ -280,20 +276,12 @@ static struct gpio_keys_button armadillo5x0_buttons[] = {
 	}
 };
 
-static struct gpio_keys_platform_data armadillo5x0_button_data = {
+static const struct gpio_keys_platform_data
+		armadillo5x0_button_data __initconst = {
 	.buttons	= armadillo5x0_buttons,
 	.nbuttons	= ARRAY_SIZE(armadillo5x0_buttons),
 };
 
-static struct platform_device armadillo5x0_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &armadillo5x0_button_data,
-	}
-};
-
 /*
  * NAND Flash
  */
@@ -383,12 +371,11 @@ static const struct fb_videomode fb_modedb[] = {
 	},
 };
 
-static struct ipu_platform_data mx3_ipu_data = {
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
 
-static struct mx3fb_platform_data mx3fb_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
 	.name		= "CRT-VGA",
 	.mode		= fb_modedb,
 	.num_modes	= ARRAY_SIZE(fb_modedb),
@@ -496,7 +483,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 
 static struct platform_device *devices[] __initdata = {
 	&armadillo5x0_smc911x_device,
-	&armadillo5x0_button_device,
 };
 
 /*
@@ -508,6 +494,7 @@ static void __init armadillo5x0_init(void)
 			ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+	imx_add_gpio_keys(&armadillo5x0_button_data);
 	imx31_add_imx_i2c1(NULL);
 
 	/* Register UART */
@@ -521,8 +508,8 @@ static void __init armadillo5x0_init(void)
 	imx31_add_mxc_mmc(0, &sdhc_pdata);
 
 	/* Register FB */
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+	imx31_add_ipu_core(&mx3_ipu_data);
+	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
 
 	/* Register NOR Flash */
 	mxc_register_device(&armadillo5x0_nor_flash,

arch/arm/mach-mx3/mach-bug.c → arch/arm/mach-imx/mach-bug.c

@@ -20,7 +20,6 @@
 #include <linux/platform_device.h>
 
 #include <mach/iomux-mx3.h>
-#include <mach/imx-uart.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
 

arch/arm/mach-imx/mach-cpuimx27.c

@@ -38,7 +38,6 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx27.h>
-#include <mach/mxc_nand.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx27.h"

arch/arm/mach-mx3/mach-cpuimx35.c → arch/arm/mach-imx/mach-cpuimx35.c

@@ -41,10 +41,8 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/iomux-mx35.h>
-#include <mach/mxc_nand.h>
 
 #include "devices-imx35.h"
-#include "devices.h"
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,

arch/arm/mach-imx/mach-eukrea_cpuimx25.c

@@ -36,8 +36,6 @@
 #include <asm/mach/map.h>
 #include <mach/common.h>
 #include <mach/mx25.h>
-#include <mach/mxc_nand.h>
-#include <mach/imxfb.h>
 #include <mach/iomux-mx25.h>
 
 #include "devices-imx25.h"

arch/arm/mach-imx/mach-imx27_visstrim_m10.c

@@ -27,7 +27,6 @@
 #include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
-#include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
@@ -130,19 +129,12 @@ static struct gpio_keys_button visstrim_gpio_keys[] = {
 	}
 };
 
-static struct gpio_keys_platform_data visstrim_gpio_keys_platform_data = {
+static const struct gpio_keys_platform_data
+		visstrim_gpio_keys_platform_data __initconst = {
 	.buttons	= visstrim_gpio_keys,
 	.nbuttons	= ARRAY_SIZE(visstrim_gpio_keys),
 };
 
-static struct platform_device visstrim_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &visstrim_gpio_keys_platform_data,
-	},
-};
-
 /* Visstrim_SM10 has a microSD slot connected to sdhc1 */
 static int visstrim_m10_sdhc1_init(struct device *dev,
 		irq_handler_t detect_irq, void *data)
@@ -186,7 +178,6 @@ static struct platform_device visstrim_m10_nor_mtd_device = {
 };
 
 static struct platform_device *platform_devices[] __initdata = {
-	&visstrim_gpio_keys_device,
 	&visstrim_m10_nor_mtd_device,
 };
 
@@ -255,6 +246,7 @@ static void __init visstrim_m10_board_init(void)
 	imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata);
 	imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata);
 	imx27_add_fec(NULL);
+	imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
 

arch/arm/mach-mx3/mach-kzm_arm11_01.c → arch/arm/mach-imx/mach-kzm_arm11_01.c

@@ -39,7 +39,6 @@
 #include <mach/iomux-mx3.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 #define KZM_ARM11_IO_ADDRESS(x) (IOMEM(					\
 	IMX_IO_P2V_MODULE(x, MX31_CS4) ?:				\

arch/arm/mach-imx/mach-mx1ads.c

@@ -25,7 +25,6 @@
 
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/i2c.h>
 #include <mach/iomux-mx1.h>
 #include <mach/irqs.h>
 

arch/arm/mach-imx/mach-mx21ads.c

@@ -25,7 +25,6 @@
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
 #include <mach/iomux-mx21.h>
-#include <mach/mxc_nand.h>
 
 #include "devices-imx21.h"
 

arch/arm/mach-imx/mach-mx25_3ds.c

@@ -29,7 +29,6 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
-#include <linux/input/matrix_keypad.h>
 #include <linux/usb/otg.h>
 
 #include <mach/hardware.h>
@@ -103,6 +102,8 @@ static iomux_v3_cfg_t mx25pdk_pads[] = {
 	MX25_PAD_SD1_DATA1__SD1_DATA1,
 	MX25_PAD_SD1_DATA2__SD1_DATA2,
 	MX25_PAD_SD1_DATA3__SD1_DATA3,
+	MX25_PAD_A14__GPIO_2_0, /* WriteProtect */
+	MX25_PAD_A15__GPIO_2_1, /* CardDetect */
 
 	/* I2C1 */
 	MX25_PAD_I2C1_CLK__I2C1_CLK,
@@ -208,6 +209,14 @@ static const struct imxi2c_platform_data mx25_3ds_i2c0_data __initconst = {
 	.bitrate = 100000,
 };
 
+#define SD1_GPIO_WP	IMX_GPIO_NR(2, 0)
+#define SD1_GPIO_CD	IMX_GPIO_NR(2, 1)
+
+static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = {
+	.wp_gpio = SD1_GPIO_WP,
+	.cd_gpio = SD1_GPIO_CD,
+};
+
 static void __init mx25pdk_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
@@ -225,7 +234,7 @@ static void __init mx25pdk_init(void)
 	imx25_add_fec(&mx25_fec_pdata);
 	imx25_add_imx_keypad(&mx25pdk_keymap_data);
 
-	imx25_add_sdhci_esdhc_imx(0, NULL);
+	imx25_add_sdhci_esdhc_imx(0, &mx25pdk_esdhc_pdata);
 	imx25_add_imx_i2c0(&mx25_3ds_i2c0_data);
 }
 

arch/arm/mach-imx/mach-mx27ads.c

@@ -29,7 +29,6 @@
 #include <asm/mach/map.h>
 #include <mach/gpio.h>
 #include <mach/iomux-mx27.h>
-#include <mach/mxc_nand.h>
 
 #include "devices-imx27.h"
 

arch/arm/mach-mx3/mach-mx31_3ds.c → arch/arm/mach-imx/mach-mx31_3ds.c

@@ -39,13 +39,8 @@
 #include <mach/iomux-mx3.h>
 #include <mach/3ds_debugboard.h>
 #include <mach/ulpi.h>
-#include <mach/mmc.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
-#include <mach/mx3_camera.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 /* CPLD IRQ line for external uart, external ethernet etc */
 #define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
@@ -178,22 +173,37 @@ static struct gpio mx31_3ds_camera_gpios[] = {
 	{ MX31_3DS_GPIO_CAMERA_RST, GPIOF_OUT_INIT_HIGH, "camera-reset" },
 };
 
-static int __init mx31_3ds_camera_alloc_dma(void)
+static const struct mx3_camera_pdata mx31_3ds_camera_pdata __initconst = {
+	.flags = MX3_CAMERA_DATAWIDTH_10,
+	.mclk_10khz = 2600,
+};
+
+static int __init mx31_3ds_init_camera(void)
 {
-	int dma;
+	int dma, ret = -ENOMEM;
+	struct platform_device *pdev =
+		imx31_alloc_mx3_camera(&mx31_3ds_camera_pdata);
+
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
 
 	if (!mx3_camera_base)
-		return -ENOMEM;
+		goto err;
 
-	dma = dma_declare_coherent_memory(&mx3_camera.dev,
+	dma = dma_declare_coherent_memory(&pdev->dev,
 					mx3_camera_base, mx3_camera_base,
 					MX31_3DS_CAMERA_BUF_SIZE,
 					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
 
 	if (!(dma & DMA_MEMORY_MAP))
-		return -ENOMEM;
+		goto err;
 
-	return 0;
+	ret = platform_device_add(pdev);
+	if (ret)
+err:
+		platform_device_put(pdev);
+
+	return ret;
 }
 
 static int mx31_3ds_camera_power(struct device *dev, int on)
@@ -241,12 +251,6 @@ static struct platform_device mx31_3ds_ov2640 = {
 	},
 };
 
-struct mx3_camera_pdata mx31_3ds_camera_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
-	.flags		= MX3_CAMERA_DATAWIDTH_10,
-	.mclk_10khz	= 2600,
-};
-
 /*
  * FB support
  */
@@ -273,8 +277,7 @@ static struct ipu_platform_data mx3_ipu_data = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
 
-static struct mx3fb_platform_data mx3fb_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
 	.name		= "Epson-VGA",
 	.mode		= fb_modedb,
 	.num_modes	= ARRAY_SIZE(fb_modedb),
@@ -723,8 +726,8 @@ static void __init mx31_3ds_init(void)
 	imx31_add_mxc_mmc(0, &sdhc1_pdata);
 
 	imx31_add_spi_imx0(&spi0_pdata);
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+	imx31_add_ipu_core(&mx3_ipu_data);
+	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
 
 	/* CSI */
 	/* Camera power: default - off */
@@ -735,10 +738,7 @@ static void __init mx31_3ds_init(void)
 		iclink_ov2640.power = NULL;
 	}
 
-	if (!mx31_3ds_camera_alloc_dma())
-		mxc_register_device(&mx3_camera, &mx31_3ds_camera_pdata);
-	else
-		pr_err("Failed to allocate dma memory for camera");
+	mx31_3ds_init_camera();
 }
 
 static void __init mx31_3ds_timer_init(void)

arch/arm/mach-mx3/mach-mx31ads.c → arch/arm/mach-imx/mach-mx31ads.c

@@ -38,7 +38,6 @@
 #endif
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 /* PBC Board interrupt status register */
 #define PBC_INTSTATUS           0x000016

arch/arm/mach-mx3/mach-mx31lilly.c → arch/arm/mach-imx/mach-mx31lilly.c

@@ -46,7 +46,6 @@
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 /*
  * This file contains module-specific initialization routines for LILLY-1131.

arch/arm/mach-mx3/mach-mx31lite.c → arch/arm/mach-imx/mach-mx31lite.c

@@ -44,7 +44,6 @@
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 /*
  * This file contains the module-specific initialization routines.

arch/arm/mach-mx3/mach-mx31moboard.c → arch/arm/mach-imx/mach-mx31moboard.c

@@ -27,6 +27,7 @@
 #include <linux/mfd/mc13783.h>
 #include <linux/spi/spi.h>
 #include <linux/types.h>
+#include <linux/memblock.h>
 
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
@@ -39,13 +40,9 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx3.h>
-#include <mach/ipu.h>
-#include <mach/mx3_camera.h>
-#include <mach/spi.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 static unsigned int moboard_pins[] = {
 	/* UART0 */
@@ -102,7 +99,7 @@ static unsigned int moboard_pins[] = {
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
-	.width  	= 2,
+	.width	= 2,
 };
 
 static struct resource mx31moboard_flash_resource = {
@@ -194,8 +191,8 @@ static struct regulator_init_data sdhc_vreg_data = {
 
 static struct regulator_consumer_supply cam_consumers[] = {
 	{
-		.dev	= &mx3_camera.dev,
-		.supply	= "cam_vcc",
+		.dev_name = "mx3_camera.0",
+		.supply = "cam_vcc",
 	},
 };
 
@@ -430,9 +427,9 @@ static int __init moboard_usbh2_init(void)
 
 static struct gpio_led mx31moboard_leds[] = {
 	{
-		.name 	= "coreboard-led-0:red:running",
+		.name	= "coreboard-led-0:red:running",
 		.default_trigger = "heartbeat",
-		.gpio 	= IOMUX_TO_GPIO(MX31_PIN_SVEN0),
+		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SVEN0),
 	}, {
 		.name	= "coreboard-led-1:red",
 		.gpio	= IOMUX_TO_GPIO(MX31_PIN_STX0),
@@ -446,7 +443,7 @@ static struct gpio_led mx31moboard_leds[] = {
 };
 
 static struct gpio_led_platform_data mx31moboard_led_pdata = {
-	.num_leds 	= ARRAY_SIZE(mx31moboard_leds),
+	.num_leds	= ARRAY_SIZE(mx31moboard_leds),
 	.leds		= mx31moboard_leds,
 };
 
@@ -458,7 +455,7 @@ static struct platform_device mx31moboard_leds_device = {
 	},
 };
 
-static struct ipu_platform_data mx3_ipu_data = {
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
 
@@ -467,37 +464,39 @@ static struct platform_device *devices[] __initdata = {
 	&mx31moboard_leds_device,
 };
 
-static struct mx3_camera_pdata camera_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
+static struct mx3_camera_pdata camera_pdata __initdata = {
 	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
 	.mclk_10khz	= 4800,
 };
 
-#define CAMERA_BUF_SIZE	(4*1024*1024)
+static phys_addr_t mx3_camera_base __initdata;
+#define MX3_CAMERA_BUF_SIZE SZ_4M
 
-static int __init mx31moboard_cam_alloc_dma(const size_t buf_size)
+static int __init mx31moboard_init_cam(void)
 {
-	dma_addr_t dma_handle;
-	void *buf;
-	int dma;
-
-	if (buf_size < 2 * 1024 * 1024)
-		return -EINVAL;
+	int dma, ret = -ENOMEM;
+	struct platform_device *pdev;
 
-	buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
-	if (!buf) {
-		pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
-		return -ENOMEM;
-	}
+	imx31_add_ipu_core(&mx3_ipu_data);
 
-	memset(buf, 0, buf_size);
+	pdev = imx31_alloc_mx3_camera(&camera_pdata);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
 
-	dma = dma_declare_coherent_memory(&mx3_camera.dev,
-					dma_handle, dma_handle, buf_size,
+	dma = dma_declare_coherent_memory(&pdev->dev,
+					mx3_camera_base, mx3_camera_base,
+					MX3_CAMERA_BUF_SIZE,
 					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+	if (!(dma & DMA_MEMORY_MAP))
+		goto err;
+
+	ret = platform_device_add(pdev);
+	if (ret)
+err:
+		platform_device_put(pdev);
+
+	return ret;
 
-	/* The way we call dma_declare_coherent_memory only a malloc can fail */
-	return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
 }
 
 static int mx31moboard_baseboard;
@@ -529,9 +528,7 @@ static void __init mx31moboard_init(void)
 
 	imx31_add_mxc_mmc(0, &sdhc1_pdata);
 
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	if (!mx31moboard_cam_alloc_dma(CAMERA_BUF_SIZE))
-		mxc_register_device(&mx3_camera, &camera_pdata);
+	mx31moboard_init_cam();
 
 	usb_xcvr_reset();
 
@@ -565,9 +562,19 @@ struct sys_timer mx31moboard_timer = {
 	.init	= mx31moboard_timer_init,
 };
 
+static void __init mx31moboard_reserve(void)
+{
+	/* reserve 4 MiB for mx3-camera */
+	mx3_camera_base = memblock_alloc(MX3_CAMERA_BUF_SIZE,
+			MX3_CAMERA_BUF_SIZE);
+	memblock_free(mx3_camera_base, MX3_CAMERA_BUF_SIZE);
+	memblock_remove(mx3_camera_base, MX3_CAMERA_BUF_SIZE);
+}
+
 MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	/* Maintainer: Valentin Longchamp, EPFL Mobots group */
 	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.reserve = mx31moboard_reserve,
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,

arch/arm/mach-mx3/mach-mx35_3ds.c → arch/arm/mach-imx/mach-mx35_3ds.c

@@ -42,7 +42,6 @@
 #include <mach/3ds_debugboard.h>
 
 #include "devices-imx35.h"
-#include "devices.h"
 
 #define EXPIO_PARENT_INT	(MXC_INTERNAL_IRQS + GPIO_PORTA + 1)
 

arch/arm/mach-imx/mach-mxt_td60.c

@@ -29,7 +29,6 @@
 #include <asm/mach/map.h>
 #include <linux/gpio.h>
 #include <mach/iomux-mx27.h>
-#include <mach/mxc_nand.h>
 #include <linux/i2c/pca953x.h>
 
 #include "devices-imx27.h"

arch/arm/mach-imx/mach-pca100.c

@@ -37,7 +37,6 @@
 #include <mach/iomux-mx27.h>
 #include <asm/mach/time.h>
 #include <mach/audmux.h>
-#include <mach/mxc_nand.h>
 #include <mach/irqs.h>
 #include <mach/ulpi.h>
 

arch/arm/mach-mx3/mach-pcm037.c → arch/arm/mach-imx/mach-pcm037.c

@@ -31,6 +31,7 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
 #include <linux/gfp.h>
+#include <linux/memblock.h>
 
 #include <media/soc_camera.h>
 
@@ -41,13 +42,9 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx3.h>
-#include <mach/ipu.h>
-#include <mach/mx3_camera.h>
-#include <mach/mx3fb.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 #include "pcm037.h"
 
 static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
@@ -404,35 +401,35 @@ static const struct imxmmc_platform_data sdhc_pdata __initconst = {
 	.exit = pcm970_sdhc1_exit,
 };
 
-struct mx3_camera_pdata camera_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
+struct mx3_camera_pdata camera_pdata __initdata = {
 	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
 	.mclk_10khz	= 2000,
 };
 
-static int __init pcm037_camera_alloc_dma(const size_t buf_size)
-{
-	dma_addr_t dma_handle;
-	void *buf;
-	int dma;
-
-	if (buf_size < 2 * 1024 * 1024)
-		return -EINVAL;
+static phys_addr_t mx3_camera_base __initdata;
+#define MX3_CAMERA_BUF_SIZE SZ_4M
 
-	buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
-	if (!buf) {
-		pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
-		return -ENOMEM;
-	}
+static int __init pcm037_init_camera(void)
+{
+	int dma, ret = -ENOMEM;
+	struct platform_device *pdev = imx31_alloc_mx3_camera(&camera_pdata);
 
-	memset(buf, 0, buf_size);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
 
-	dma = dma_declare_coherent_memory(&mx3_camera.dev,
-					dma_handle, dma_handle, buf_size,
+	dma = dma_declare_coherent_memory(&pdev->dev,
+					mx3_camera_base, mx3_camera_base,
+					MX3_CAMERA_BUF_SIZE,
 					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+	if (!(dma & DMA_MEMORY_MAP))
+		goto err;
+
+	ret = platform_device_add(pdev);
+	if (ret)
+err:
+		platform_device_put(pdev);
 
-	/* The way we call dma_declare_coherent_memory only a malloc can fail */
-	return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+	return ret;
 }
 
 static struct platform_device *devices[] __initdata = {
@@ -442,7 +439,7 @@ static struct platform_device *devices[] __initdata = {
 	&pcm037_mt9v022,
 };
 
-static struct ipu_platform_data mx3_ipu_data = {
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
 
@@ -500,7 +497,6 @@ static const struct fb_videomode fb_modedb[] = {
 };
 
 static struct mx3fb_platform_data mx3fb_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
 	.name		= "Sharp-LQ035Q7DH06-QVGA",
 	.mode		= fb_modedb,
 	.num_modes	= ARRAY_SIZE(fb_modedb),
@@ -638,8 +634,8 @@ static void __init pcm037_init(void)
 
 	imx31_add_mxc_nand(&pcm037_nand_board_info);
 	imx31_add_mxc_mmc(0, &sdhc_pdata);
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+	imx31_add_ipu_core(&mx3_ipu_data);
+	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
 
 	/* CSI */
 	/* Camera power: default - off */
@@ -649,8 +645,7 @@ static void __init pcm037_init(void)
 	else
 		iclink_mt9t031.power = NULL;
 
-	if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
-		mxc_register_device(&mx3_camera, &camera_pdata);
+	pcm037_init_camera();
 
 	platform_device_register(&pcm970_sja1000);
 
@@ -680,9 +675,19 @@ struct sys_timer pcm037_timer = {
 	.init	= pcm037_timer_init,
 };
 
+static void __init pcm037_reserve(void)
+{
+	/* reserve 4 MiB for mx3-camera */
+	mx3_camera_base = memblock_alloc(MX3_CAMERA_BUF_SIZE,
+			MX3_CAMERA_BUF_SIZE);
+	memblock_free(mx3_camera_base, MX3_CAMERA_BUF_SIZE);
+	memblock_remove(mx3_camera_base, MX3_CAMERA_BUF_SIZE);
+}
+
 MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	/* Maintainer: Pengutronix */
 	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.reserve = pcm037_reserve,
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,

arch/arm/mach-mx3/mach-pcm037_eet.c → arch/arm/mach-imx/mach-pcm037_eet.c

@@ -7,19 +7,16 @@
  * published by the Free Software Foundation.
  */
 #include <linux/gpio.h>
-#include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
-#include <mach/spi.h>
 
 #include <asm/mach-types.h>
 
 #include "pcm037.h"
-#include "devices.h"
 #include "devices-imx31.h"
 
 static unsigned int pcm037_eet_pins[] = {
@@ -156,20 +153,13 @@ static struct gpio_keys_button pcm037_gpio_keys[] = {
 	},
 };
 
-static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = {
+static const struct gpio_keys_platform_data
+		pcm037_gpio_keys_platform_data __initconst = {
 	.buttons	= pcm037_gpio_keys,
 	.nbuttons	= ARRAY_SIZE(pcm037_gpio_keys),
 	.rep		= 0, /* No auto-repeat */
 };
 
-static struct platform_device pcm037_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &pcm037_gpio_keys_platform_data,
-	},
-};
-
 static int __init eet_init_devices(void)
 {
 	if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
@@ -182,9 +172,8 @@ static int __init eet_init_devices(void)
 	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
 	imx31_add_spi_imx0(&pcm037_spi1_pdata);
 
-	platform_device_register(&pcm037_gpio_keys_device);
+	imx_add_gpio_keys(&pcm037_gpio_keys_platform_data);
 
 	return 0;
 }
-
 late_initcall(eet_init_devices);

arch/arm/mach-imx/mach-pcm038.c

@@ -36,7 +36,6 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx27.h>
-#include <mach/mxc_nand.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx27.h"

arch/arm/mach-mx3/mach-pcm043.c → arch/arm/mach-imx/mach-pcm043.c

@@ -36,14 +36,10 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/iomux-mx35.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
 #include <mach/ulpi.h>
 #include <mach/audmux.h>
-#include <mach/esdhc.h>
 
 #include "devices-imx35.h"
-#include "devices.h"
 
 static const struct fb_videomode fb_modedb[] = {
 	{
@@ -81,12 +77,11 @@ static const struct fb_videomode fb_modedb[] = {
 	},
 };
 
-static struct ipu_platform_data mx3_ipu_data = {
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
 
-static struct mx3fb_platform_data mx3fb_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
 	.name		= "Sharp-LQ035Q7",
 	.mode		= fb_modedb,
 	.num_modes	= ARRAY_SIZE(fb_modedb),
@@ -127,12 +122,12 @@ static struct at24_platform_data board_eeprom = {
 };
 
 static struct i2c_board_info pcm043_i2c_devices[] = {
-       {
+	{
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
 	}, {
 		I2C_BOARD_INFO("pcf8563", 0x51),
-	}
+	},
 };
 
 static struct platform_device *devices[] __initdata = {
@@ -390,8 +385,8 @@ static void __init pcm043_init(void)
 
 	imx35_add_imx_i2c0(&pcm043_i2c0_data);
 
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+	imx35_add_ipu_core(&mx3_ipu_data);
+	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
 
 	if (otg_mode_host) {
 		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |

arch/arm/mach-mx3/mach-qong.c → arch/arm/mach-imx/mach-qong.c

@@ -33,24 +33,23 @@
 #include <mach/iomux-mx3.h>
 
 #include "devices-imx31.h"
-#include "devices.h"
 
 /* FPGA defines */
 #define QONG_FPGA_VERSION(major, minor, rev)	\
 	(((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
 
-#define QONG_FPGA_BASEADDR 		MX31_CS1_BASE_ADDR
-#define QONG_FPGA_PERIPH_SIZE 		(1 << 24)
+#define QONG_FPGA_BASEADDR		MX31_CS1_BASE_ADDR
+#define QONG_FPGA_PERIPH_SIZE		(1 << 24)
 
 #define QONG_FPGA_CTRL_BASEADDR		QONG_FPGA_BASEADDR
-#define QONG_FPGA_CTRL_SIZE 		0x10
+#define QONG_FPGA_CTRL_SIZE		0x10
 /* FPGA control registers */
 #define QONG_FPGA_CTRL_VERSION		0x00
 
 #define QONG_DNET_ID		1
 #define QONG_DNET_BASEADDR	\
 	(QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE)
-#define QONG_DNET_SIZE 		0x00001000
+#define QONG_DNET_SIZE		0x00001000
 
 #define QONG_FPGA_IRQ		IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1)
 
@@ -166,15 +165,15 @@ static struct platform_nand_data qong_nand_data = {
 		.options		= 0,
 	},
 	.ctrl = {
-		.cmd_ctrl 		= qong_nand_cmd_ctrl,
+		.cmd_ctrl		= qong_nand_cmd_ctrl,
 		.dev_ready		= qong_nand_device_ready,
 		.select_chip		= qong_nand_select_chip,
 	}
 };
 
 static struct resource qong_nand_resource = {
-	.start  	= MX31_CS3_BASE_ADDR,
-	.end    	= MX31_CS3_BASE_ADDR + SZ_32M - 1,
+	.start		= MX31_CS3_BASE_ADDR,
+	.end		= MX31_CS3_BASE_ADDR + SZ_32M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 

arch/arm/mach-mx3/mach-vpr200.c → arch/arm/mach-imx/mach-vpr200.c

@@ -32,16 +32,12 @@
 #include <mach/common.h>
 #include <mach/iomux-mx35.h>
 #include <mach/irqs.h>
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
 #include <linux/mfd/mc13xxx.h>
-#include <linux/gpio_keys.h>
 
 #include "devices-imx35.h"
-#include "devices.h"
 
 #define GPIO_LCDPWR	IMX_GPIO_NR(1, 2)
 #define GPIO_PMIC_INT	IMX_GPIO_NR(2, 0)
@@ -91,12 +87,11 @@ static const struct fb_videomode fb_modedb[] = {
 	}
 };
 
-static struct ipu_platform_data mx3_ipu_data = {
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
 	.irq_base = MXC_IPU_IRQ_START,
 };
 
-static struct mx3fb_platform_data mx3fb_pdata = {
-	.dma_dev	= &mx3_ipu.dev,
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
 	.name		= "PT0708048",
 	.mode		= fb_modedb,
 	.num_modes	= ARRAY_SIZE(fb_modedb),
@@ -141,18 +136,12 @@ static struct gpio_keys_button vpr200_gpio_keys_table[] = {
 	{KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE},
 };
 
-static struct gpio_keys_platform_data vpr200_gpio_keys_data = {
+static const struct gpio_keys_platform_data
+		vpr200_gpio_keys_data __initconst = {
 	.buttons = vpr200_gpio_keys_table,
 	.nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table),
 };
 
-static struct platform_device vpr200_device_gpiokeys = {
-	.name = "gpio-keys",
-	.dev = {
-		.platform_data = &vpr200_gpio_keys_data,
-	}
-};
-
 static struct mc13xxx_platform_data vpr200_pmic = {
 	.flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
 };
@@ -271,7 +260,6 @@ static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
 
 static struct platform_device *devices[] __initdata = {
 	&vpr200_flash,
-	&vpr200_device_gpiokeys,
 };
 
 /*
@@ -283,6 +271,7 @@ static void __init vpr200_board_init(void)
 
 	imx35_add_fec(NULL);
 	imx35_add_imx2_wdt(NULL);
+	imx_add_gpio_keys(&vpr200_gpio_keys_data);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
@@ -299,8 +288,8 @@ static void __init vpr200_board_init(void)
 	imx35_add_imx_uart0(NULL);
 	imx35_add_imx_uart2(NULL);
 
-	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
-	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+	imx35_add_ipu_core(&mx3_ipu_data);
+	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
 
 	imx35_add_fsl_usb2_udc(&otg_device_pdata);
 	imx35_add_mxc_ehci_hs(&usb_host_pdata);

arch/arm/mach-imx/mm-imx31.c

@@ -0,0 +1,66 @@
+/*
+ *  Copyright (C) 1999,2000 Arm Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - add MX31 specific definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-v3.h>
+#include <mach/gpio.h>
+#include <mach/irqs.h>
+
+static struct map_desc mx31_io_desc[] __initdata = {
+	imx_map_entry(MX31, X_MEMC, MT_DEVICE),
+	imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx31_map_io(void)
+{
+	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
+}
+
+void __init imx31_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX31);
+	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
+}
+
+static struct mxc_gpio_port imx31_gpio_ports[] = {
+	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3),
+};
+
+void __init mx31_init_irq(void)
+{
+	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
+	mxc_gpio_init(imx31_gpio_ports,	ARRAY_SIZE(imx31_gpio_ports));
+}

arch/arm/mach-imx/mm-imx35.c

@@ -0,0 +1,63 @@
+/*
+ *  Copyright (C) 1999,2000 Arm Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - add MX31 specific definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-v3.h>
+#include <mach/gpio.h>
+#include <mach/irqs.h>
+
+static struct map_desc mx35_io_desc[] __initdata = {
+	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
+	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+void __init mx35_map_io(void)
+{
+	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
+}
+
+void __init imx35_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX35);
+	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
+}
+
+static struct mxc_gpio_port imx35_gpio_ports[] = {
+	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3),
+};
+
+void __init mx35_init_irq(void)
+{
+	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
+	mxc_gpio_init(imx35_gpio_ports,	ARRAY_SIZE(imx35_gpio_ports));
+}