ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3)

Let's have a single platform data structure for the OMAP's High-Speed
USB host subsystem instead of having 3 separate ones i.e. one for
board data, one for USB Host (UHH) module and one for USB-TLL module.

This makes the code much simpler and avoids creating multiple copies of
platform data.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>

arch/arm/mach-omap2/board-3430sdp.c

@@ -424,7 +424,7 @@ static void enable_board_wakeup_source(void)
 		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,

arch/arm/mach-omap2/board-3630sdp.c

@@ -53,7 +53,7 @@ static void enable_board_wakeup_source(void)
 		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,

arch/arm/mach-omap2/board-am3517crane.c

@@ -40,7 +40,7 @@ static struct omap_board_mux board_mux[] __initdata = {
 };
 #endif
 
-static struct usbhs_omap_board_data usbhs_bdata __initdata = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

arch/arm/mach-omap2/board-am3517evm.c

@@ -274,7 +274,7 @@ static __init void am3517_evm_mcbsp1_init(void)
 	omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0);
 }
 
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
 		defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)

arch/arm/mach-omap2/board-cm-t35.c

@@ -418,7 +418,7 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct usbhs_omap_board_data usbhs_bdata __initdata = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

arch/arm/mach-omap2/board-cm-t3517.c

@@ -166,7 +166,7 @@ static inline void cm_t3517_init_rtc(void) {}
 #define HSUSB2_RESET_GPIO	(147)
 #define USB_HUB_RESET_GPIO	(152)
 
-static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = {
+static struct usbhs_omap_platform_data cm_t3517_ehci_pdata __initdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

arch/arm/mach-omap2/board-devkit8000.c

@@ -435,7 +435,7 @@ static struct platform_device *devkit8000_devices[] __initdata = {
 	&omap_dm9000_dev,
 };
 
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,

arch/arm/mach-omap2/board-igep0020.c

@@ -526,7 +526,7 @@ static void __init igep_i2c_init(void)
 	omap3_pmic_init("twl4030", &igep_twldata);
 }
 
-static const struct usbhs_omap_board_data igep2_usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -537,7 +537,7 @@ static const struct usbhs_omap_board_data igep2_usbhs_bdata __initconst = {
 	.reset_gpio_port[2] = -EINVAL,
 };
 
-static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

arch/arm/mach-omap2/board-omap3beagle.c

@@ -430,7 +430,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = {
 	&madc_hwmon,
 };
 
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,

arch/arm/mach-omap2/board-omap3evm.c

@@ -538,7 +538,7 @@ static int __init omap3_evm_i2c_init(void)
 	return 0;
 }
 
-static struct usbhs_omap_board_data usbhs_bdata __initdata = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,

arch/arm/mach-omap2/board-omap3pandora.c

@@ -567,7 +567,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
 	&pandora_backlight,
 };
 
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,

arch/arm/mach-omap2/board-omap3stalker.c

@@ -361,7 +361,7 @@ static struct platform_device *omap3_stalker_devices[] __initdata = {
 	&keys_gpio,
 };
 
-static struct usbhs_omap_board_data usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -309,7 +309,7 @@ static struct platform_device *omap3_touchbook_devices[] __initdata = {
 	&keys_gpio,
 };
 
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,

arch/arm/mach-omap2/board-omap4panda.c

@@ -139,7 +139,7 @@ static struct platform_device *panda_devices[] __initdata = {
 	&btwilink_device,
 };
 
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

arch/arm/mach-omap2/board-overo.c

@@ -457,7 +457,7 @@ static int __init overo_spi_init(void)
 	return 0;
 }
 
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

arch/arm/mach-omap2/board-zoom.c

@@ -92,7 +92,7 @@ static struct mtd_partition zoom_nand_partitions[] = {
 	},
 };
 
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
 	.port_mode[0]		= OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1]		= OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[2]		= OMAP_USBHS_PORT_MODE_UNUSED,

arch/arm/mach-omap2/usb-host.c

@@ -37,11 +37,6 @@
 #define	USBHS_UHH_HWMODNAME	"usb_host_hs"
 #define USBHS_TLL_HWMODNAME	"usb_tll_hs"
 
-static struct usbhs_omap_platform_data		usbhs_data;
-static struct usbtll_omap_platform_data		usbtll_data;
-static struct ehci_hcd_omap_platform_data	ehci_data;
-static struct ohci_hcd_omap_platform_data	ohci_data;
-
 static struct omap_device_pm_latency omap_uhhtll_latency[] = {
 	  {
 		.deactivate_func = omap_device_idle_hwmods,
@@ -485,32 +480,18 @@ void __init setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 	}
 }
 
-void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
+void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
 {
 	struct omap_hwmod	*uhh_hwm, *tll_hwm;
 	struct platform_device	*pdev;
 	int			bus_id = -1;
-	int			i;
-
-	for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
-		usbhs_data.port_mode[i] = pdata->port_mode[i];
-		usbtll_data.port_mode[i] = pdata->port_mode[i];
-		ohci_data.port_mode[i] = pdata->port_mode[i];
-		ehci_data.port_mode[i] = pdata->port_mode[i];
-		ehci_data.reset_gpio_port[i] = pdata->reset_gpio_port[i];
-		ehci_data.regulator[i] = pdata->regulator[i];
-	}
-	ehci_data.phy_reset = pdata->phy_reset;
-	ohci_data.es2_compatibility = pdata->es2_compatibility;
-	usbhs_data.ehci_data = &ehci_data;
-	usbhs_data.ohci_data = &ohci_data;
 
 	if (cpu_is_omap34xx()) {
 		setup_ehci_io_mux(pdata->port_mode);
 		setup_ohci_io_mux(pdata->port_mode);
 
 		if (omap_rev() <= OMAP3430_REV_ES2_1)
-			usbhs_data.single_ulpi_bypass = true;
+			pdata->single_ulpi_bypass = true;
 
 	} else if (cpu_is_omap44xx()) {
 		setup_4430ehci_io_mux(pdata->port_mode);
@@ -530,7 +511,7 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 	}
 
 	pdev = omap_device_build(OMAP_USBTLL_DEVICE, bus_id, tll_hwm,
-				&usbtll_data, sizeof(usbtll_data),
+				pdata, sizeof(*pdata),
 				omap_uhhtll_latency,
 				ARRAY_SIZE(omap_uhhtll_latency), false);
 	if (IS_ERR(pdev)) {
@@ -540,7 +521,7 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 	}
 
 	pdev = omap_device_build(OMAP_USBHS_DEVICE, bus_id, uhh_hwm,
-				&usbhs_data, sizeof(usbhs_data),
+				pdata, sizeof(*pdata),
 				omap_uhhtll_latency,
 				ARRAY_SIZE(omap_uhhtll_latency), false);
 	if (IS_ERR(pdev)) {
@@ -552,7 +533,7 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 
 #else
 
-void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
+void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
 {
 }
 

arch/arm/mach-omap2/usb.h

@@ -53,26 +53,8 @@
 #define USBPHY_OTGSESSEND_EN	(1 << 20)
 #define USBPHY_DATA_POLARITY	(1 << 23)
 
-struct usbhs_omap_board_data {
-	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
-
-	/* have to be valid if phy_reset is true and portx is in phy mode */
-	int	reset_gpio_port[OMAP3_HS_USB_PORTS];
-
-	/* Set this to true for ES2.x silicon */
-	unsigned			es2_compatibility:1;
-
-	unsigned			phy_reset:1;
-
-	/*
-	 * Regulators for USB PHYs.
-	 * Each PHY can have a separate regulator.
-	 */
-	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
-};
-
 extern void usb_musb_init(struct omap_musb_board_data *board_data);
-extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
+extern void usbhs_init(struct usbhs_omap_platform_data *pdata);
 
 extern void am35x_musb_reset(void);
 extern void am35x_musb_phy_power(u8 on);