Merge remote-tracking branch 'kumar/next' into next

Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt

@@ -0,0 +1,63 @@
+* FSL MPIC Message Registers
+
+This binding specifies what properties must be available in the device tree
+representation of the message register blocks found in some FSL MPIC
+implementations.
+
+Required properties:
+
+    - compatible: Specifies the compatibility list for the message register
+      block.  The type shall be <string-list> and the value shall be of the form
+      "fsl,mpic-v<version>-msgr", where <version> is the version number of
+      the MPIC containing the message registers.
+
+    - reg: Specifies the base physical address(s) and size(s) of the
+      message register block's addressable register space.  The type shall be
+      <prop-encoded-array>.
+
+    - interrupts: Specifies a list of interrupt-specifiers which are available
+      for receiving interrupts. Interrupt-specifier consists of two cells: first
+      cell is interrupt-number and second cell is level-sense. The type shall be
+      <prop-encoded-array>.
+
+Optional properties:
+
+    - mpic-msgr-receive-mask: Specifies what registers in the containing block
+      are allowed to receive interrupts. The value is a bit mask where a set
+      bit at bit 'n' indicates that message register 'n' can receive interrupts.
+      Note that "bit 'n'" is numbered from LSB for PPC hardware. The type shall
+      be <u32>. If not present, then all of the message registers in the block
+      are available.
+
+Aliases:
+
+    An alias should be created for every message register block.  They are not
+    required, though.  However, a particular implementation of this binding
+    may require aliases to be present.  Aliases are of the form
+    'mpic-msgr-block<n>', where <n> is an integer specifying the block's number.
+    Numbers shall start at 0.
+
+Example:
+
+	aliases {
+		mpic-msgr-block0 = &mpic_msgr_block0;
+		mpic-msgr-block1 = &mpic_msgr_block1;
+	};
+
+	mpic_msgr_block0: mpic-msgr-block@41400 {
+		compatible = "fsl,mpic-v3.1-msgr";
+		reg = <0x41400 0x200>;
+		// Message registers 0 and 2 in this block can receive interrupts on
+		// sources 0xb0 and 0xb2, respectively.
+		interrupts = <0xb0 2 0xb2 2>;
+		mpic-msgr-receive-mask = <0x5>;
+	};
+
+	mpic_msgr_block1: mpic-msgr-block@42400 {
+		compatible = "fsl,mpic-v3.1-msgr";
+		reg = <0x42400 0x200>;
+		// Message registers 0 and 2 in this block can receive interrupts on
+		// sources 0xb4 and 0xb6, respectively.
+		interrupts = <0xb4 2 0xb6 2>;
+		mpic-msgr-receive-mask = <0x5>;
+	};

Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt

@@ -6,8 +6,10 @@ Required properties:
   etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
   the parent type.
 
-- reg : should contain the address and the length of the shared message
-  interrupt register set.
+- reg : It may contain one or two regions. The first region should contain
+  the address and the length of the shared message interrupt register set.
+  The second region should contain the address of aliased MSIIR register for
+  platforms that have such an alias.
 
 - msi-available-ranges: use <start count> style section to define which
   msi interrupt can be used in the 256 msi interrupts. This property is

arch/powerpc/boot/Makefile

@@ -247,7 +247,7 @@ image-$(CONFIG_ASP834x)			+= dtbImage.asp834x-redboot
 image-$(CONFIG_MPC8540_ADS)		+= cuImage.mpc8540ads
 image-$(CONFIG_MPC8560_ADS)		+= cuImage.mpc8560ads
 image-$(CONFIG_MPC85xx_CDS)		+= cuImage.mpc8541cds \
-					   cuImage.mpc8548cds \
+					   cuImage.mpc8548cds_32b \
 					   cuImage.mpc8555cds
 image-$(CONFIG_MPC85xx_MDS)		+= cuImage.mpc8568mds
 image-$(CONFIG_MPC85xx_DS)		+= cuImage.mpc8544ds \

arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi

@@ -202,7 +202,7 @@
 /include/ "pq3-etsec1-timer-0.dtsi"
 
 	usb@22000 {
-		compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+		compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
 		reg = <0x22000 0x1000>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -210,7 +210,7 @@
 	};
 
 	usb@23000 {
-		compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+		compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
 		reg = <0x23000 0x1000>;
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi

@@ -89,6 +89,21 @@
 	};
 };
 
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <48 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,srio-rmu-handle = <&rmu>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+};
+
 &soc {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -134,6 +149,7 @@
 
 /include/ "pq3-sec2.1-0.dtsi"
 /include/ "pq3-mpic.dtsi"
+/include/ "pq3-rmu-0.dtsi"
 
 	global-utilities@e0000 {
 		compatible = "fsl,mpc8548-guts";

arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi

@@ -43,7 +43,9 @@
 		serial0 = &serial0;
 		serial1 = &serial1;
 		ethernet0 = &enet0;
-		ethernet1 = &enet2;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
 		pci0 = &pci0;
 		pci1 = &pci1;
 		pci2 = &pci2;

arch/powerpc/boot/dts/fsl/p1010si-post.dtsi

@@ -156,6 +156,9 @@
 
 /include/ "pq3-dma-0.dtsi"
 /include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
 /include/ "pq3-esdhc-0.dtsi"
 	sdhc@2e000 {
 		compatible = "fsl,p1010-esdhc", "fsl,esdhc";

arch/powerpc/boot/dts/fsl/p1020si-post.dtsi

@@ -142,7 +142,13 @@
 
 /include/ "pq3-dma-0.dtsi"
 /include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
 /include/ "pq3-usb2-dr-1.dtsi"
+	usb@23000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
 
 /include/ "pq3-esdhc-0.dtsi"
 	sdhc@2e000 {

arch/powerpc/boot/dts/fsl/p1021si-post.dtsi

@@ -142,8 +142,15 @@
 
 /include/ "pq3-dma-0.dtsi"
 /include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
 
 /include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		sdhci,auto-cmd12;
+	};
+
 /include/ "pq3-sec3.3-0.dtsi"
 
 /include/ "pq3-mpic.dtsi"

arch/powerpc/boot/dts/fsl/p1022si-post.dtsi

@@ -35,7 +35,11 @@
 &lbc {
 	#address-cells = <2>;
 	#size-cells = <1>;
-	compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
+	/*
+	 * The localbus on the P1022 is not a simple-bus because of the eLBC
+	 * pin muxing when the DIU is enabled.
+	 */
+	compatible = "fsl,p1022-elbc", "fsl,elbc";
 	interrupts = <19 2 0 0>;
 };
 
@@ -199,7 +203,13 @@
 
 /include/ "pq3-dma-0.dtsi"
 /include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
 /include/ "pq3-usb2-dr-1.dtsi"
+	usb@23000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
 
 /include/ "pq3-esdhc-0.dtsi"
 	sdhc@2e000 {

arch/powerpc/boot/dts/fsl/p1023si-post.dtsi

@@ -142,6 +142,9 @@
 
 /include/ "pq3-dma-0.dtsi"
 /include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
 
 	crypto: crypto@300000 {
 		compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";

arch/powerpc/boot/dts/fsl/p2020si-post.dtsi

@@ -171,6 +171,9 @@
 
 /include/ "pq3-dma-0.dtsi"
 /include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
 /include/ "pq3-etsec1-0.dtsi"
 /include/ "pq3-etsec1-timer-0.dtsi"
 

arch/powerpc/boot/dts/fsl/p2041si-post.dtsi

@@ -309,12 +309,14 @@
 /include/ "qoriq-gpio-0.dtsi"
 /include/ "qoriq-usb2-mph-0.dtsi"
 		usb0: usb@210000 {
+			compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
 			phy_type = "utmi";
 			port0;
 		};
 
 /include/ "qoriq-usb2-dr-0.dtsi"
 		usb1: usb@211000 {
+			compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
 			dr_mode = "host";
 			phy_type = "utmi";
 		};

arch/powerpc/boot/dts/fsl/p3041si-post.dtsi

@@ -336,12 +336,14 @@
 /include/ "qoriq-gpio-0.dtsi"
 /include/ "qoriq-usb2-mph-0.dtsi"
 		usb0: usb@210000 {
+			compatible = "fsl-usb2-mph-v1.6", "fsl-usb2-mph";
 			phy_type = "utmi";
 			port0;
 		};
 
 /include/ "qoriq-usb2-dr-0.dtsi"
 		usb1: usb@211000 {
+			compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
 			dr_mode = "host";
 			phy_type = "utmi";
 		};

arch/powerpc/boot/dts/fsl/p3060si-post.dtsi

@@ -291,6 +291,12 @@
 /include/ "qoriq-duart-1.dtsi"
 /include/ "qoriq-gpio-0.dtsi"
 /include/ "qoriq-usb2-mph-0.dtsi"
+	usb@210000 {
+		compatible = "fsl-usb2-mph-v2.2", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+	};
 /include/ "qoriq-usb2-dr-0.dtsi"
+	usb@211000 {
+		compatible = "fsl-usb2-dr-v2.2", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+	};
 /include/ "qoriq-sec4.1-0.dtsi"
 };

arch/powerpc/boot/dts/fsl/p5020si-post.dtsi

@@ -339,12 +339,14 @@
 /include/ "qoriq-gpio-0.dtsi"
 /include/ "qoriq-usb2-mph-0.dtsi"
 		usb0: usb@210000 {
+			compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
 			phy_type = "utmi";
 			port0;
 		};
 
 /include/ "qoriq-usb2-dr-0.dtsi"
 		usb1: usb@211000 {
+			compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
 			dr_mode = "host";
 			phy_type = "utmi";
 		};

arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi

@@ -1,7 +1,7 @@
 /*
  * PQ3 eTSEC device tree stub [ @ offsets 0x24000 ]
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,7 @@ ethernet@24000 {
 	compatible = "gianfar";
 	reg = <0x24000 0x1000>;
 	ranges = <0x0 0x24000 0x1000>;
+	fsl,magic-packet;
 	local-mac-address = [ 00 00 00 00 00 00 ];
 	interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
 };

arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi

@@ -1,7 +1,7 @@
 /*
  * PQ3 eTSEC device tree stub [ @ offsets 0x25000 ]
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,7 @@ ethernet@25000 {
 	compatible = "gianfar";
 	reg = <0x25000 0x1000>;
 	ranges = <0x0 0x25000 0x1000>;
+	fsl,magic-packet;
 	local-mac-address = [ 00 00 00 00 00 00 ];
 	interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
 };

arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi

@@ -1,7 +1,7 @@
 /*
  * PQ3 eTSEC device tree stub [ @ offsets 0x26000 ]
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,7 @@ ethernet@26000 {
 	compatible = "gianfar";
 	reg = <0x26000 0x1000>;
 	ranges = <0x0 0x26000 0x1000>;
+	fsl,magic-packet;
 	local-mac-address = [ 00 00 00 00 00 00 ];
 	interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
 };

arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi

@@ -1,7 +1,7 @@
 /*
  * PQ3 eTSEC device tree stub [ @ offsets 0x27000 ]
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,7 @@ ethernet@27000 {
 	compatible = "gianfar";
 	reg = <0x27000 0x1000>;
 	ranges = <0x0 0x27000 0x1000>;
+	fsl,magic-packet;
 	local-mac-address = [ 00 00 00 00 00 00 ];
 	interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>;
 };

arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi

@@ -33,32 +33,32 @@
  */
 
 crypto@30000 {
-	compatible = "fsl,sec4.4", "fsl,sec4.0";
+	compatible = "fsl,sec-v4.4", "fsl,sec-v4.0";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	reg		 = <0x30000 0x10000>;
 	interrupts	 = <58 2 0 0>;
 
 	sec_jr0: jr@1000 {
-		compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+		compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
 		reg	   = <0x1000 0x1000>;
 		interrupts	 = <45 2 0 0>;
 	};
 
 	sec_jr1: jr@2000 {
-		compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+		compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
 		reg	   = <0x2000 0x1000>;
 		interrupts	 = <45 2 0 0>;
 	};
 
 	sec_jr2: jr@3000 {
-		compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+		compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
 		reg	   = <0x3000 0x1000>;
 		interrupts	 = <45 2 0 0>;
 	};
 
 	sec_jr3: jr@4000 {
-		compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+		compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
 		reg	   = <0x4000 0x1000>;
 		interrupts	 = <45 2 0 0>;
 	};

arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi

@@ -53,7 +53,7 @@ timer@41100 {
 
 msi0: msi@41600 {
 	compatible = "fsl,mpic-msi";
-	reg = <0x41600 0x200>;
+	reg = <0x41600 0x200 0x44140 4>;
 	msi-available-ranges = <0 0x100>;
 	interrupts = <
 		0xe0 0 0 0
@@ -68,7 +68,7 @@ msi0: msi@41600 {
 
 msi1: msi@41800 {
 	compatible = "fsl,mpic-msi";
-	reg = <0x41800 0x200>;
+	reg = <0x41800 0x200 0x45140 4>;
 	msi-available-ranges = <0 0x100>;
 	interrupts = <
 		0xe8 0 0 0
@@ -83,7 +83,7 @@ msi1: msi@41800 {
 
 msi2: msi@41a00 {
 	compatible = "fsl,mpic-msi";
-	reg = <0x41a00 0x200>;
+	reg = <0x41a00 0x200 0x46140 4>;
 	msi-available-ranges = <0 0x100>;
 	interrupts = <
 		0xf0 0 0 0

arch/powerpc/boot/dts/ge_imp3a.dts

@@ -0,0 +1,255 @@
+/*
+ * GE IMP3A Device Tree Source
+ *
+ * Copyright 2010-2011 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Based on: P2020 DS Device Tree Source
+ * Copyright 2009 Freescale Semiconductor Inc.
+ */
+
+/include/ "fsl/p2020si-pre.dtsi"
+
+/ {
+	model = "GE_IMP3A";
+	compatible = "ge,imp3a";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fef05000 {
+		reg = <0 0xfef05000 0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xff000000 0x01000000
+			  0x1 0x0 0x0 0xe0000000 0x08000000
+			  0x2 0x0 0x0 0xe8000000 0x08000000
+			  0x3 0x0 0x0 0xfc100000 0x00020000
+			  0x4 0x0 0x0 0xfc000000 0x00008000
+			  0x5 0x0 0x0 0xfc008000 0x00008000
+			  0x6 0x0 0x0 0xfee00000 0x00040000
+			  0x7 0x0 0x0 0xfee80000 0x00040000>;
+
+		/* nor@0,0 is a mirror of part of the memory in nor@1,0
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "ge,imp3a-firmware-mirror", "cfi-flash";
+			reg = <0x0 0x0 0x1000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x1000000>;
+				read-only;
+			};
+		};
+		*/
+
+		nor@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "ge,imp3a-paged-flash", "cfi-flash";
+			reg = <0x1 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "user";
+				reg = <0x0 0x7800000>;
+			};
+
+			partition@7800000 {
+				label = "firmware";
+				reg = <0x7800000 0x800000>;
+				read-only;
+			};
+		};
+
+		nvram@3,0 {
+			device_type = "nvram";
+			compatible = "simtek,stk14ca8";
+			reg = <0x3 0x0 0x20000>;
+		};
+
+		fpga@4,0 {
+			compatible = "ge,imp3a-fpga-regs";
+			reg = <0x4 0x0 0x20>;
+		};
+
+		gef_pic: pic@4,20 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			device_type = "interrupt-controller";
+			compatible = "ge,imp3a-fpga-pic", "gef,fpga-pic-1.00";
+			reg = <0x4 0x20 0x20>;
+			interrupts = <6 7 0 0>;
+		};
+
+		gef_gpio: gpio@4,400 {
+			#gpio-cells = <2>;
+			compatible = "ge,imp3a-gpio";
+			reg = <0x4 0x400 0x24>;
+			gpio-controller;
+		};
+
+		wdt@4,800 {
+			compatible = "ge,imp3a-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
+			reg = <0x4 0x800 0x8>;
+			interrupts = <10 4>;
+			interrupt-parent = <&gef_pic>;
+		};
+
+		/* Second watchdog available, driver currently supports one.
+		wdt@4,808 {
+			compatible = "gef,imp3a-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
+			reg = <0x4 0x808 0x8>;
+			interrupts = <9 4>;
+			interrupt-parent = <&gef_pic>;
+		};
+		*/
+
+		nand@6,0 {
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x6 0x0 0x40000>;
+		};
+
+		nand@7,0 {
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x7 0x0 0x40000>;
+		};
+	};
+
+	soc: soc@fef00000 {
+		ranges = <0x0 0 0xfef00000 0x100000>;
+
+		i2c@3000 {
+			hwmon@48 {
+				compatible = "national,lm92";
+				reg = <0x48>;
+			};
+
+			hwmon@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			rtc@51 {
+				compatible = "epson,rx8581";
+				reg = <0x51>;
+			};
+
+			eti@6b {
+				compatible = "dallas,ds1682";
+				reg = <0x6b>;
+			};
+		};
+
+		usb@22000 {
+			phy_type = "ulpi";
+			dr_mode = "host";
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0xc 0x4>;
+				reg = <0x1>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0xb 0x4>;
+				reg = <0x2>;
+			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@26520 {
+			status = "disabled";
+		};
+
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "gmii";
+		};
+
+		enet1: ethernet@25000 {
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "gmii";
+		};
+
+		enet2: ethernet@26000 {
+			status = "disabled";
+		};
+	};
+
+	pci0: pcie@fef08000 {
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xfe020000 0x0 0x10000>;
+		reg = <0 0xfef08000 0 0x1000>;
+
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	pci1: pcie@fef09000 {
+		reg = <0 0xfef09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xfe010000 0x0 0x10000>;
+
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+
+	};
+
+	pci2: pcie@fef0a000 {
+		reg = <0 0xfef0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xfe000000 0x0 0x10000>;
+
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+};
+
+/include/ "fsl/p2020si-post.dtsi"

arch/powerpc/boot/dts/mpc836x_mds.dts

@@ -405,6 +405,10 @@
 				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
+			tbi-phy@2 {
+				device_type = "tbi-phy";
+				reg = <0x2>;
+			};
 		};
 
 		qeic: interrupt-controller@80 {

arch/powerpc/boot/dts/mpc8536ds.dts

@@ -1,7 +1,7 @@
 /*
  * MPC8536 DS Device Tree Source
  *
- * Copyright 2008 Freescale Semiconductor, Inc.
+ * Copyright 2008, 2011 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -34,6 +34,10 @@
 
 	lbc: localbus@ffe05000 {
 		reg = <0 0xffe05000 0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
+			  0x2 0x0 0x0 0xffa00000 0x00040000
+			  0x3 0x0 0x0 0xffdf0000 0x00008000>;
 	};
 
 	board_soc: soc: soc@ffe00000 {

arch/powerpc/boot/dts/mpc8536ds.dtsi

@@ -32,6 +32,99 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			reg = <0x0 0x03000000>;
+			label = "ramdisk-nor";
+		};
+
+		partition@3000000 {
+			reg = <0x03000000 0x00e00000>;
+			label = "diagnostic-nor";
+			read-only;
+		};
+
+		partition@3e00000 {
+			reg = <0x03e00000 0x00200000>;
+			label = "dink-nor";
+			read-only;
+		};
+
+		partition@4000000 {
+			reg = <0x04000000 0x00400000>;
+			label = "kernel-nor";
+		};
+
+		partition@4400000 {
+			reg = <0x04400000 0x03b00000>;
+			label = "fs-nor";
+		};
+
+		partition@7f00000 {
+			reg = <0x07f00000 0x00080000>;
+			label = "dtb-nor";
+		};
+
+		partition@7f80000 {
+			reg = <0x07f80000 0x00080000>;
+			label = "u-boot-nor";
+			read-only;
+		};
+	};
+
+	nand@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8536-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x2 0x0 0x40000>;
+
+		partition@0 {
+			reg = <0x0 0x02000000>;
+			label = "u-boot-nand";
+			read-only;
+		};
+
+		partition@2000000 {
+			reg = <0x02000000 0x10000000>;
+			label = "fs-nand";
+		};
+
+		partition@12000000 {
+			reg = <0x12000000 0x08000000>;
+			label = "ramdisk-nand";
+		};
+
+		partition@1a000000 {
+			reg = <0x1a000000 0x04000000>;
+			label = "kernel-nand";
+		};
+
+		partition@1e000000 {
+			reg = <0x1e000000 0x01000000>;
+			label = "dtb-nand";
+		};
+
+		partition@1f000000 {
+			reg = <0x1f000000 0x21000000>;
+			label = "empty-nand";
+		};
+	};
+
+	board-control@3,0 {
+		compatible = "fsl,mpc8536ds-fpga-pixis";
+		reg = <0x3 0x0 0x8000>;
+	};
+};
+
 &board_soc {
 	i2c@3100 {
 		rtc@68 {

arch/powerpc/boot/dts/mpc8536ds_36b.dts

@@ -1,7 +1,7 @@
 /*
  * MPC8536DS Device Tree Source (36-bit address map)
  *
- * Copyright 2008-2009 Freescale Semiconductor, Inc.
+ * Copyright 2008-2009, 2011 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -33,7 +33,11 @@
 	};
 
 	lbc: localbus@ffe05000 {
-		reg = <0 0xffe05000 0 0x1000>;
+		reg = <0xf 0xffe05000 0 0x1000>;
+
+		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
+			  0x2 0x0 0xf 0xffa00000 0x00040000
+			  0x3 0x0 0xf 0xffdf0000 0x00008000>;
 	};
 
 	board_soc: soc: soc@fffe00000 {

arch/powerpc/boot/dts/mpc8548cds.dts

@@ -1,306 +0,0 @@
-/*
- * MPC8548 CDS Device Tree Source
- *
- * Copyright 2006, 2008 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/mpc8548si-pre.dtsi"
-
-/ {
-	model = "MPC8548CDS";
-	compatible = "MPC8548CDS", "MPC85xxCDS";
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0 0x0 0x8000000>;	// 128M at 0x0
-	};
-
-	lbc: localbus@e0005000 {
-		reg = <0 0xe0005000 0 0x1000>;
-	};
-
-	soc: soc8548@e0000000 {
-		ranges = <0 0x0 0xe0000000 0x100000>;
-
-		i2c@3000 {
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-
-			eeprom@56 {
-				compatible = "atmel,24c64";
-				reg = <0x56>;
-			};
-
-			eeprom@57 {
-				compatible = "atmel,24c64";
-				reg = <0x57>;
-			};
-		};
-
-		i2c@3100 {
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-		};
-
-		mdio@24520 {
-			phy0: ethernet-phy@0 {
-				interrupts = <5 1 0 0>;
-				reg = <0x0>;
-				device_type = "ethernet-phy";
-			};
-			phy1: ethernet-phy@1 {
-				interrupts = <5 1 0 0>;
-				reg = <0x1>;
-				device_type = "ethernet-phy";
-			};
-			phy2: ethernet-phy@2 {
-				interrupts = <5 1 0 0>;
-				reg = <0x2>;
-				device_type = "ethernet-phy";
-			};
-			phy3: ethernet-phy@3 {
-				interrupts = <5 1 0 0>;
-				reg = <0x3>;
-				device_type = "ethernet-phy";
-			};
-			tbi0: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		enet1: ethernet@25000 {
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-		};
-
-		mdio@25520 {
-			tbi1: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		enet2: ethernet@26000 {
-			tbi-handle = <&tbi2>;
-			phy-handle = <&phy2>;
-		};
-
-		mdio@26520 {
-			tbi2: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		enet3: ethernet@27000 {
-			tbi-handle = <&tbi3>;
-			phy-handle = <&phy3>;
-		};
-
-		mdio@27520 {
-			tbi3: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-	};
-
-	pci0: pci@e0008000 {
-		reg = <0 0xe0008000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000
-			  0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>;
-		clock-frequency = <66666666>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x4 (PCIX Slot 2) */
-			0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-			0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-			0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-			0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-			/* IDSEL 0x5 (PCIX Slot 3) */
-			0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
-			0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
-			0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
-			0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
-
-			/* IDSEL 0x6 (PCIX Slot 4) */
-			0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
-			0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
-			0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
-			0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
-			/* IDSEL 0x8 (PCIX Slot 5) */
-			0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-			0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-			0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-			0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-			/* IDSEL 0xC (Tsi310 bridge) */
-			0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-			0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-			0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-			0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-			/* IDSEL 0x14 (Slot 2) */
-			0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-			0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-			0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-			0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-			/* IDSEL 0x15 (Slot 3) */
-			0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
-			0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
-			0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
-			0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
-
-			/* IDSEL 0x16 (Slot 4) */
-			0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
-			0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
-			0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
-			0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
-			/* IDSEL 0x18 (Slot 5) */
-			0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-			0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-			0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-			0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-			/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
-			0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-			0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-			0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-			0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
-
-		pci_bridge@1c {
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			interrupt-map = <
-
-				/* IDSEL 0x00 (PrPMC Site) */
-				0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-				0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-				0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-				0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-				/* IDSEL 0x04 (VIA chip) */
-				0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-				0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-				0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-				0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-				/* IDSEL 0x05 (8139) */
-				0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
-
-				/* IDSEL 0x06 (Slot 6) */
-				0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
-				0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
-				0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
-				0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
-				/* IDESL 0x07 (Slot 7) */
-				0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
-				0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0
-				0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
-				0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>;
-
-			reg = <0xe000 0x0 0x0 0x0 0x0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x80000>;
-			clock-frequency = <33333333>;
-
-			isa@4 {
-				device_type = "isa";
-				#interrupt-cells = <2>;
-				#size-cells = <1>;
-				#address-cells = <2>;
-				reg = <0x2000 0x0 0x0 0x0 0x0>;
-				ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
-				interrupt-parent = <&i8259>;
-
-				i8259: interrupt-controller@20 {
-					interrupt-controller;
-					device_type = "interrupt-controller";
-					reg = <0x1 0x20 0x2
-					       0x1 0xa0 0x2
-					       0x1 0x4d0 0x2>;
-					#address-cells = <0>;
-					#interrupt-cells = <2>;
-					compatible = "chrp,iic";
-					interrupts = <0 1 0 0>;
-					interrupt-parent = <&mpic>;
-				};
-
-				rtc@70 {
-					compatible = "pnpPNP,b00";
-					reg = <0x1 0x70 0x2>;
-				};
-			};
-		};
-	};
-
-	pci1: pci@e0009000 {
-		reg = <0 0xe0009000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000
-			  0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>;
-		clock-frequency = <66666666>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x15 */
-			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
-			0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-			0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-			0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
-	};
-
-	pci2: pcie@e000a000 {
-		reg = <0 0xe000a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "fsl/mpc8548si-post.dtsi"

arch/powerpc/boot/dts/mpc8548cds.dtsi

@@ -0,0 +1,306 @@
+/*
+ * MPC8548CDS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x01000000>;
+		bank-width = <2>;
+		device-width = <2>;
+
+		partition@0 {
+			reg = <0x0 0x0b00000>;
+			label = "ramdisk-nor";
+		};
+
+		partition@300000 {
+			reg = <0x0b00000 0x0400000>;
+			label = "kernel-nor";
+		};
+
+		partition@700000 {
+			reg = <0x0f00000 0x060000>;
+			label = "dtb-nor";
+		};
+
+		partition@760000 {
+			reg = <0x0f60000 0x020000>;
+			label = "env-nor";
+			read-only;
+		};
+
+		partition@780000 {
+			reg = <0x0f80000 0x080000>;
+			label = "u-boot-nor";
+			read-only;
+		};
+	};
+
+	board-control@1,0 {
+		compatible = "fsl,mpc8548cds-fpga";
+		reg = <0x1 0x0 0x1000>;
+	};
+};
+
+&board_soc {
+	i2c@3000 {
+		eeprom@50 {
+			compatible = "atmel,24c64";
+			reg = <0x50>;
+		};
+
+		eeprom@56 {
+			compatible = "atmel,24c64";
+			reg = <0x56>;
+		};
+
+		eeprom@57 {
+			compatible = "atmel,24c64";
+			reg = <0x57>;
+		};
+	};
+
+	i2c@3100 {
+		eeprom@50 {
+			compatible = "atmel,24c64";
+			reg = <0x50>;
+		};
+	};
+
+	enet0: ethernet@24000 {
+		tbi-handle = <&tbi0>;
+		phy-handle = <&phy0>;
+	};
+
+	mdio@24520 {
+		phy0: ethernet-phy@0 {
+			interrupts = <5 1 0 0>;
+			reg = <0x0>;
+			device_type = "ethernet-phy";
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <5 1 0 0>;
+			reg = <0x1>;
+			device_type = "ethernet-phy";
+		};
+		phy2: ethernet-phy@2 {
+			interrupts = <5 1 0 0>;
+			reg = <0x2>;
+			device_type = "ethernet-phy";
+		};
+		phy3: ethernet-phy@3 {
+			interrupts = <5 1 0 0>;
+			reg = <0x3>;
+			device_type = "ethernet-phy";
+		};
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet1: ethernet@25000 {
+		tbi-handle = <&tbi1>;
+		phy-handle = <&phy1>;
+	};
+
+	mdio@25520 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet2: ethernet@26000 {
+		tbi-handle = <&tbi2>;
+		phy-handle = <&phy2>;
+	};
+
+	mdio@26520 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet3: ethernet@27000 {
+		tbi-handle = <&tbi3>;
+		phy-handle = <&phy3>;
+	};
+
+	mdio@27520 {
+		tbi3: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+};
+
+&board_pci0 {
+	interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+	interrupt-map = <
+		/* IDSEL 0x4 (PCIX Slot 2) */
+		0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+		0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+		0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+		0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+		/* IDSEL 0x5 (PCIX Slot 3) */
+		0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
+		0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
+		0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
+		0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
+
+		/* IDSEL 0x6 (PCIX Slot 4) */
+		0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+		0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+		0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+		0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+		/* IDSEL 0x8 (PCIX Slot 5) */
+		0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+		0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+		0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+		0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+		/* IDSEL 0xC (Tsi310 bridge) */
+		0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+		0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+		0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+		0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+		/* IDSEL 0x14 (Slot 2) */
+		0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+		0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+		0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+		0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+		/* IDSEL 0x15 (Slot 3) */
+		0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
+		0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
+		0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
+		0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
+
+		/* IDSEL 0x16 (Slot 4) */
+		0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+		0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+		0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+		0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+		/* IDSEL 0x18 (Slot 5) */
+		0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+		0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+		0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+		0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+		/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
+		0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+		0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+		0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+		0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
+
+	pci_bridge@1c {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x00 (PrPMC Site) */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+			/* IDSEL 0x04 (VIA chip) */
+			0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+			0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+			0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+			0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+			/* IDSEL 0x05 (8139) */
+			0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x06 (Slot 6) */
+			0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+			0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDESL 0x07 (Slot 7) */
+			0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0
+			0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>;
+
+		reg = <0xe000 0x0 0x0 0x0 0x0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		ranges = <0x2000000 0x0 0x80000000
+			  0x2000000 0x0 0x80000000
+			  0x0 0x20000000
+			  0x1000000 0x0 0x0
+			  0x1000000 0x0 0x0
+			  0x0 0x80000>;
+		clock-frequency = <33333333>;
+
+		isa@4 {
+			device_type = "isa";
+			#interrupt-cells = <2>;
+			#size-cells = <1>;
+			#address-cells = <2>;
+			reg = <0x2000 0x0 0x0 0x0 0x0>;
+			ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
+			interrupt-parent = <&i8259>;
+
+			i8259: interrupt-controller@20 {
+				interrupt-controller;
+				device_type = "interrupt-controller";
+				reg = <0x1 0x20 0x2
+				       0x1 0xa0 0x2
+				       0x1 0x4d0 0x2>;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				compatible = "chrp,iic";
+				interrupts = <0 1 0 0>;
+				interrupt-parent = <&mpic>;
+			};
+
+			rtc@70 {
+				compatible = "pnpPNP,b00";
+				reg = <0x1 0x70 0x2>;
+			};
+		};
+	};
+};

arch/powerpc/boot/dts/mpc8548cds_32b.dts

@@ -0,0 +1,86 @@
+/*
+ * MPC8548 CDS Device Tree Source (32-bit address map)
+ *
+ * Copyright 2006, 2008, 2011-2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/mpc8548si-pre.dtsi"
+
+/ {
+	model = "MPC8548CDS";
+	compatible = "MPC8548CDS", "MPC85xxCDS";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0x0 0x8000000>;	// 128M at 0x0
+	};
+
+	board_lbc: lbc: localbus@e0005000 {
+		reg = <0 0xe0005000 0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xff000000 0x01000000
+			  0x1 0x0 0x0 0xf8004000 0x00001000>;
+
+	};
+
+	board_soc: soc: soc8548@e0000000 {
+		ranges = <0 0x0 0xe0000000 0x100000>;
+	};
+
+	board_pci0: pci0: pci@e0008000 {
+		reg = <0 0xe0008000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>;
+		clock-frequency = <66666666>;
+	};
+
+	pci1: pci@e0009000 {
+		reg = <0 0xe0009000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x15 */
+			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
+			0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+			0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+			0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
+	};
+
+	pci2: pcie@e000a000 {
+		reg = <0 0xe000a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	rio: rapidio@e00c0000 {
+		reg = <0x0 0xe00c0000 0x0 0x20000>;
+		port1 {
+			ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
+		};
+	};
+};
+
+/*
+ * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask.
+ */
+
+/include/ "fsl/mpc8548si-post.dtsi"
+/include/ "mpc8548cds.dtsi"

arch/powerpc/boot/dts/mpc8548cds_36b.dts

@@ -0,0 +1,86 @@
+/*
+ * MPC8548 CDS Device Tree Source (36-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/mpc8548si-pre.dtsi"
+
+/ {
+	model = "MPC8548CDS";
+	compatible = "MPC8548CDS", "MPC85xxCDS";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0x0 0x8000000>;	// 128M at 0x0
+	};
+
+	board_lbc: lbc: localbus@fe0005000 {
+		reg = <0xf 0xe0005000 0 0x1000>;
+
+		ranges = <0x0 0x0 0xf 0xff000000 0x01000000
+			  0x1 0x0 0xf 0xf8004000 0x00001000>;
+
+	};
+
+	board_soc: soc: soc8548@fe0000000 {
+		ranges = <0 0xf 0xe0000000 0x100000>;
+	};
+
+	board_pci0: pci0: pci@fe0008000 {
+		reg = <0xf 0xe0008000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0xf 0xe2000000 0x0 0x800000>;
+		clock-frequency = <66666666>;
+	};
+
+	pci1: pci@fe0009000 {
+		reg = <0xf 0xe0009000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0xf 0xe2800000 0x0 0x800000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x15 */
+			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
+			0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+			0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+			0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
+	};
+
+	pci2: pcie@fe000a000 {
+		reg = <0xf 0xe000a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xe3000000 0x0 0x100000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	rio: rapidio@fe00c0000 {
+		reg = <0xf 0xe00c0000 0x0 0x20000>;
+		port1 {
+			ranges = <0x0 0x0 0xc 0x40000000 0x0 0x20000000>;
+		};
+	};
+};
+
+/*
+ * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask.
+ */
+
+/include/ "fsl/mpc8548si-post.dtsi"
+/include/ "mpc8548cds.dtsi"

arch/powerpc/boot/dts/mpc8572ds.dtsi

@@ -41,37 +41,47 @@
 		bank-width = <2>;
 		device-width = <1>;
 
-		ramdisk@0 {
+		partition@0 {
 			reg = <0x0 0x03000000>;
-			read-only;
+			label = "ramdisk-nor";
 		};
 
-		diagnostic@3000000 {
+		partition@3000000 {
 			reg = <0x03000000 0x00e00000>;
+			label = "diagnostic-nor";
 			read-only;
 		};
 
-		dink@3e00000 {
+		partition@3e00000 {
 			reg = <0x03e00000 0x00200000>;
+			label = "dink-nor";
 			read-only;
 		};
 
-		kernel@4000000 {
+		partition@4000000 {
 			reg = <0x04000000 0x00400000>;
-			read-only;
+			label = "kernel-nor";
 		};
 
-		jffs2@4400000 {
+		partition@4400000 {
 			reg = <0x04400000 0x03b00000>;
+			label = "fs-nor";
+		};
+
+		partition@7f00000 {
+			reg = <0x07f00000 0x00060000>;
+			label = "dtb-nor";
 		};
 
-		dtb@7f00000 {
-			reg = <0x07f00000 0x00080000>;
+		partition@7f60000 {
+			reg = <0x07f60000 0x00020000>;
+			label = "env-nor";
 			read-only;
 		};
 
-		u-boot@7f80000 {
+		partition@7f80000 {
 			reg = <0x07f80000 0x00080000>;
+			label = "u-boot-nor";
 			read-only;
 		};
 	};
@@ -83,31 +93,35 @@
 			     "fsl,elbc-fcm-nand";
 		reg = <0x2 0x0 0x40000>;
 
-		u-boot@0 {
+		partition@0 {
 			reg = <0x0 0x02000000>;
+			label = "u-boot-nand";
 			read-only;
 		};
 
-		jffs2@2000000 {
+		partition@2000000 {
 			reg = <0x02000000 0x10000000>;
+			label = "fs-nand";
 		};
 
-		ramdisk@12000000 {
+		partition@12000000 {
 			reg = <0x12000000 0x08000000>;
-			read-only;
+			label = "ramdisk-nand";
 		};
 
-		kernel@1a000000 {
+		partition@1a000000 {
 			reg = <0x1a000000 0x04000000>;
+			label = "kernel-nand";
 		};
 
-		dtb@1e000000 {
+		partition@1e000000 {
 			reg = <0x1e000000 0x01000000>;
-			read-only;
+			label = "dtb-nand";
 		};
 
-		empty@1f000000 {
+		partition@1f000000 {
 			reg = <0x1f000000 0x21000000>;
+			label = "empty-nand";
 		};
 	};
 

arch/powerpc/boot/dts/p1010rdb.dtsi

@@ -138,7 +138,7 @@
 			#size-cells = <1>;
 			compatible = "spansion,s25sl12801";
 			reg = <0>;
-			spi-max-frequency = <50000000>;
+			spi-max-frequency = <40000000>;
 
 			partition@0 {
 				/* 1MB for u-boot Bootloader Image */
@@ -196,7 +196,7 @@
 		};
 
 		tbi-phy@3 {
-			device-type = "tbi-phy";
+			device_type = "tbi-phy";
 			reg = <0x3>;
 		};
 	};

arch/powerpc/boot/dts/p1020rdb-pc.dtsi

@@ -0,0 +1,247 @@
+/*
+ * P1020 RDB-PC Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x1000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 256KB for Vitesse 7385 Switch firmware */
+			reg = <0x0 0x00040000>;
+			label = "NOR Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@80000 {
+			/* 3.5 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00380000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 11MB for JFFS2 based Root file System */
+			reg = <0x00400000 0x00b00000>;
+			label = "NOR JFFS2 Root File System";
+		};
+
+		partition@f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x00f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,p1020-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x1 0x0 0x40000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND DTB Image";
+		};
+
+		partition@200000 {
+			/* 4MB for Linux Kernel Image */
+			reg = <0x00200000 0x00400000>;
+			label = "NAND Linux Kernel Image";
+		};
+
+		partition@600000 {
+			/* 4MB for Compressed Root file System Image */
+			reg = <0x00600000 0x00400000>;
+			label = "NAND Compressed RFS Image";
+		};
+
+		partition@a00000 {
+			/* 7MB for JFFS2 based Root file System */
+			reg = <0x00a00000 0x00700000>;
+			label = "NAND JFFS2 Root File System";
+		};
+
+		partition@1100000 {
+			/* 15MB for JFFS2 based Root file System */
+			reg = <0x01100000 0x00f00000>;
+			label = "NAND Writable User area";
+		};
+	};
+
+	L2switch@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "vitesse-7385";
+		reg = <0x2 0x0 0x20000>;
+	};
+
+	cpld@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cpld";
+		reg = <0x3 0x0 0x20000>;
+		read-only;
+	};
+};
+
+&soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "pericom,pt7c4338";
+			reg = <0x68>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801";
+			reg = <0>;
+			spi-max-frequency = <40000000>; /* input clock */
+
+			partition@u-boot {
+				/* 512KB for u-boot Bootloader Image */
+				reg = <0x0 0x00080000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			partition@dtb {
+				/* 512KB for DTB Image*/
+				reg = <0x00080000 0x00080000>;
+				label = "dtb";
+			};
+
+			partition@kernel {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00100000 0x00400000>;
+				label = "kernel";
+			};
+
+			partition@fs {
+				/* 4MB for Compressed RFS Image */
+				reg = <0x00500000 0x00400000>;
+				label = "file system";
+			};
+
+			partition@jffs-fs {
+				/* 7MB for JFFS2 based RFS */
+				reg = <0x00900000 0x00700000>;
+				label = "file system jffs2";
+			};
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	/* USB2 is shared with localbus, so it must be disabled
+	   by default. We can't put 'status = "disabled";' here
+	   since U-Boot doesn't clear the status property when
+	   it enables USB2. OTOH, U-Boot does create a new node
+	   when there isn't any. So, just comment it out.
+	usb@23000 {
+		phy_type = "ulpi";
+	};
+	*/
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupt-parent = <&mpic>;
+			interrupts = <3 1>;
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupt-parent = <&mpic>;
+			interrupts = <2 1>;
+			reg = <0x1>;
+		};
+
+		tbi0: tbi-phy@11 {
+			device_type = "tbi-phy";
+			reg = <0x11>;
+		};
+	};
+
+	mdio@25000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		fixed-link = <1 1 1000 0 0>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};

arch/powerpc/boot/dts/p1020rdb-pc_32b.dts

@@ -0,0 +1,90 @@
+/*
+ * P1020 RDB-PC Device Tree Source (32-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020RDB-PC";
+	compatible = "fsl,P1020RDB-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xff800000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000
+			  0x3 0x0 0x0 0xffa00000 0x00020000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020rdb-pc.dtsi"
+/include/ "fsl/p1020si-post.dtsi"

arch/powerpc/boot/dts/p1020rdb-pc_36b.dts

@@ -0,0 +1,90 @@
+/*
+ * P1020 RDB-PC Device Tree Source (36-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020RDB-PC";
+	compatible = "fsl,P1020RDB-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+			  0x1 0x0 0xf 0xff800000 0x00040000
+			  0x2 0x0 0xf 0xffb00000 0x00040000
+			  0x3 0x0 0xf 0xffa00000 0x00020000>;
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020rdb-pc.dtsi"
+/include/ "fsl/p1020si-post.dtsi"

arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts

@@ -0,0 +1,64 @@
+/*
+ * P1020 RDB-PC  Core0 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts file allows core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb,
+ * eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi.
+ *
+ * Please note to add "-b 0" for core0's dts compiling.
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p1020rdb-pc_32b.dts"
+
+/ {
+	model = "fsl,P1020RDB-PC";
+	compatible = "fsl,P1020RDB-PC";
+
+	aliases {
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		serial0 = &serial0;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		PowerPC,P1020@1 {
+			status = "disabled";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		status = "disabled";
+	};
+
+	soc@ffe00000 {
+		serial1: serial@4600 {
+			status = "disabled";
+		};
+
+		enet0: ethernet@b0000 {
+			status = "disabled";
+		};
+
+		mpic: pic@40000 {
+			protected-sources = <
+			42 29 30 34	/* serial1, enet0-queue-group0 */
+			17 18 24 45	/* enet0-queue-group1, crypto */
+			>;
+			pic-no-reset;
+		};
+	};
+};

arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts

@@ -0,0 +1,142 @@
+/*
+ * P1020 RDB-PC Core1 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts allows core1 to have l2, eth0, crypto.
+ *
+ * Please note to add "-b 1" for core1's dts compiling.
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p1020rdb-pc_32b.dts"
+
+/ {
+	model = "fsl,P1020RDB-PC";
+	compatible = "fsl,P1020RDB-PC";
+
+	aliases {
+		ethernet0 = &enet0;
+		serial0 = &serial1;
+		};
+
+	cpus {
+		PowerPC,P1020@0 {
+			status = "disabled";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		status = "disabled";
+	};
+
+	soc@ffe00000 {
+		ecm-law@0 {
+			status = "disabled";
+		};
+
+		ecm@1000 {
+			status = "disabled";
+		};
+
+		memory-controller@2000 {
+			status = "disabled";
+		};
+
+		i2c@3000 {
+			status = "disabled";
+		};
+
+		i2c@3100 {
+			status = "disabled";
+		};
+
+		serial0: serial@4500 {
+			status = "disabled";
+		};
+
+		spi@7000 {
+			status = "disabled";
+		};
+
+		gpio: gpio-controller@f000 {
+			status = "disabled";
+		};
+
+		dma@21300 {
+			status = "disabled";
+		};
+
+		mdio@24000 {
+			status = "disabled";
+		};
+
+		mdio@25000 {
+			status = "disabled";
+		};
+
+		enet1: ethernet@b1000 {
+			status = "disabled";
+		};
+
+		enet2: ethernet@b2000 {
+			status = "disabled";
+		};
+
+		usb@22000 {
+			status = "disabled";
+		};
+
+		sdhci@2e000 {
+			status = "disabled";
+		};
+
+		mpic: pic@40000 {
+			protected-sources = <
+			16 		/* ecm, mem, L2, pci0, pci1 */
+			43 42 59	/* i2c, serial0, spi */
+			47 63 62 	/* gpio, tdm */
+			20 21 22 23	/* dma */
+			03 02 		/* mdio */
+			35 36 40	/* enet1-queue-group0 */
+			51 52 67	/* enet1-queue-group1 */
+			31 32 33	/* enet2-queue-group0 */
+			25 26 27	/* enet2-queue-group1 */
+			28 72 58 	/* usb, sdhci, crypto */
+			0xb0 0xb1 0xb2	/* message */
+			0xb3 0xb4 0xb5
+			0xb6 0xb7
+			0xe0 0xe1 0xe2	/* msi */
+			0xe3 0xe4 0xe5
+			0xe6 0xe7		/* sdhci, crypto , pci */
+			>;
+			pic-no-reset;
+		};
+
+		msi@41600 {
+			status = "disabled";
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			status = "disabled";
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		status = "disabled";
+	};
+
+	pci1: pcie@ffe0a000 {
+		status = "disabled";
+	};
+};

arch/powerpc/boot/dts/p1021rdb.dts

@@ -0,0 +1,96 @@
+/*
+ * P1021 RDB Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1021si-pre.dtsi"
+/ {
+	model = "fsl,P1021RDB";
+	compatible = "fsl,P1021RDB-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xff800000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe: qe@ffe80000 {
+                ranges = <0x0 0x0 0xffe80000 0x40000>;
+                reg = <0 0xffe80000 0 0x480>;
+                brg-frequency = <0>;
+                bus-frequency = <0>;
+        };
+};
+
+/include/ "p1021rdb.dtsi"
+/include/ "fsl/p1021si-post.dtsi"

arch/powerpc/boot/dts/p1021rdb.dtsi

@@ -0,0 +1,236 @@
+/*
+ * P1021 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x1000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 256KB for Vitesse 7385 Switch firmware */
+			reg = <0x0 0x00040000>;
+			label = "NOR Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@80000 {
+			/* 3.5 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00380000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 11MB for JFFS2 based Root file System */
+			reg = <0x00400000 0x00b00000>;
+			label = "NOR JFFS2 Root File System";
+		};
+
+		partition@f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x00f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,p1021-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x1 0x0 0x40000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND DTB Image";
+		};
+
+		partition@200000 {
+			/* 4MB for Linux Kernel Image */
+			reg = <0x00200000 0x00400000>;
+			label = "NAND Linux Kernel Image";
+		};
+
+		partition@600000 {
+			/* 4MB for Compressed Root file System Image */
+			reg = <0x00600000 0x00400000>;
+			label = "NAND Compressed RFS Image";
+		};
+
+		partition@a00000 {
+			/* 7MB for JFFS2 based Root file System */
+			reg = <0x00a00000 0x00700000>;
+			label = "NAND JFFS2 Root File System";
+		};
+
+		partition@1100000 {
+			/* 15MB for User Writable Area  */
+			reg = <0x01100000 0x00f00000>;
+			label = "NAND Writable User area";
+		};
+	};
+
+	L2switch@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "vitesse-7385";
+		reg = <0x2 0x0 0x20000>;
+	};
+};
+
+&soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "pericom,pt7c4338";
+			reg = <0x68>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801";
+			reg = <0>;
+			spi-max-frequency = <40000000>; /* input clock */
+
+			partition@u-boot {
+				/* 512KB for u-boot Bootloader Image */
+				reg = <0x0 0x00080000>;
+				label = "SPI Flash U-Boot Image";
+				read-only;
+			};
+
+			partition@dtb {
+				/* 512KB for DTB Image */
+				reg = <0x00080000 0x00080000>;
+				label = "SPI Flash DTB Image";
+			};
+
+			partition@kernel {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00100000 0x00400000>;
+				label = "SPI Flash Linux Kernel Image";
+			};
+
+			partition@fs {
+				/* 4MB for Compressed RFS Image */
+				reg = <0x00500000 0x00400000>;
+				label = "SPI Flash Compressed RFSImage";
+			};
+
+			partition@jffs-fs {
+				/* 7MB for JFFS2 based RFS */
+				reg = <0x00900000 0x00700000>;
+				label = "SPI Flash JFFS2 RFS";
+			};
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupt-parent = <&mpic>;
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupt-parent = <&mpic>;
+			interrupts = <2 1 0 0>;
+			reg = <0x1>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@25000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26000 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		fixed-link = <1 1 1000 0 0>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		tbi-handle = <&tbi2>;
+		phy-connection-type = "rgmii-id";
+	};
+};

arch/powerpc/boot/dts/p1021rdb_36b.dts

@@ -0,0 +1,96 @@
+/*
+ * P1021 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1021si-pre.dtsi"
+/ {
+	model = "fsl,P1021RDB";
+	compatible = "fsl,P1021RDB-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+			  0x1 0x0 0xf 0xff800000 0x00040000
+			  0x2 0x0 0xf 0xffb00000 0x00020000>;
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		reg = <0xf 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe: qe@fffe80000 {
+                ranges = <0x0 0xf 0xffe80000 0x40000>;
+                reg = <0xf 0xffe80000 0 0x480>;
+                brg-frequency = <0>;
+                bus-frequency = <0>;
+        };
+};
+
+/include/ "p1021rdb.dtsi"
+/include/ "fsl/p1021si-post.dtsi"

arch/powerpc/boot/dts/p1022ds.dts

@@ -1,274 +0,0 @@
-/*
- * P1022 DS 36Bit Physical Address Map Device Tree Source
- *
- * Copyright 2010 Freescale Semiconductor, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/include/ "fsl/p1022si-pre.dtsi"
-/ {
-	model = "fsl,P1022DS";
-	compatible = "fsl,P1022DS";
-
-	memory {
-		device_type = "memory";
-	};
-
-	lbc: localbus@fffe05000 {
-		reg = <0xf 0xffe05000 0 0x1000>;
-		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
-			  0x1 0x0 0xf 0xe0000000 0x08000000
-			  0x2 0x0 0xf 0xff800000 0x00040000
-			  0x3 0x0 0xf 0xffdf0000 0x00008000>;
-
-		/*
-		 * This node is used to access the pixis via "indirect" mode,
-		 * which is done by writing the pixis register index to chip
-		 * select 0 and the value to/from chip select 1.  Indirect
-		 * mode is the only way to access the pixis when DIU video
-		 * is enabled.  Note that this assumes that the first column
-		 * of the 'ranges' property above is the chip select number.
-		 */
-		board-control@0,0 {
-			compatible = "fsl,p1022ds-indirect-pixis";
-			reg = <0x0 0x0 1	/* CS0 */
-			       0x1 0x0 1>;	/* CS1 */
-		};
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x8000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			partition@0 {
-				reg = <0x0 0x03000000>;
-				label = "ramdisk-nor";
-				read-only;
-			};
-
-			partition@3000000 {
-				reg = <0x03000000 0x00e00000>;
-				label = "diagnostic-nor";
-				read-only;
-			};
-
-			partition@3e00000 {
-				reg = <0x03e00000 0x00200000>;
-				label = "dink-nor";
-				read-only;
-			};
-
-			partition@4000000 {
-				reg = <0x04000000 0x00400000>;
-				label = "kernel-nor";
-				read-only;
-			};
-
-			partition@4400000 {
-				reg = <0x04400000 0x03b00000>;
-				label = "jffs2-nor";
-			};
-
-			partition@7f00000 {
-				reg = <0x07f00000 0x00080000>;
-				label = "dtb-nor";
-				read-only;
-			};
-
-			partition@7f80000 {
-				reg = <0x07f80000 0x00080000>;
-				label = "u-boot-nor";
-				read-only;
-			};
-		};
-
-		nand@2,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,elbc-fcm-nand";
-			reg = <0x2 0x0 0x40000>;
-
-			partition@0 {
-				reg = <0x0 0x02000000>;
-				label = "u-boot-nand";
-				read-only;
-			};
-
-			partition@2000000 {
-				reg = <0x02000000 0x10000000>;
-				label = "jffs2-nand";
-			};
-
-			partition@12000000 {
-				reg = <0x12000000 0x10000000>;
-				label = "ramdisk-nand";
-				read-only;
-			};
-
-			partition@22000000 {
-				reg = <0x22000000 0x04000000>;
-				label = "kernel-nand";
-			};
-
-			partition@26000000 {
-				reg = <0x26000000 0x01000000>;
-				label = "dtb-nand";
-				read-only;
-			};
-
-			partition@27000000 {
-				reg = <0x27000000 0x19000000>;
-				label = "reserved-nand";
-			};
-		};
-
-		board-control@3,0 {
-			compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
-			reg = <3 0 0x30>;
-			interrupt-parent = <&mpic>;
-			/*
-			 * IRQ8 is generated if the "EVENT" switch is pressed
-			 * and PX_CTL[EVESEL] is set to 00.
-			 */
-			interrupts = <8 8 0 0>;
-		};
-	};
-
-	soc: soc@fffe00000 {
-		ranges = <0x0 0xf 0xffe00000 0x100000>;
-
-		i2c@3100 {
-			wm8776:codec@1a {
-				compatible = "wlf,wm8776";
-				reg = <0x1a>;
-				/*
-				 * clock-frequency will be set by U-Boot if
-				 * the clock is enabled.
-				 */
-			};
-		};
-
-		spi@7000 {
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "spansion,s25sl12801";
-				reg = <0>;
-				spi-max-frequency = <40000000>; /* input clock */
-
-				partition@0 {
-					label = "u-boot-spi";
-					reg = <0x00000000 0x00100000>;
-					read-only;
-				};
-				partition@100000 {
-					label = "kernel-spi";
-					reg = <0x00100000 0x00500000>;
-					read-only;
-				};
-				partition@600000 {
-					label = "dtb-spi";
-					reg = <0x00600000 0x00100000>;
-					read-only;
-				};
-				partition@700000 {
-					label = "file system-spi";
-					reg = <0x00700000 0x00900000>;
-				};
-			};
-		};
-
-		ssi@15000 {
-			fsl,mode = "i2s-slave";
-			codec-handle = <&wm8776>;
-			fsl,ssi-asynchronous;
-		};
-
-		usb@22000 {
-			phy_type = "ulpi";
-		};
-
-		usb@23000 {
-			status = "disabled";
-		};
-
-		mdio@24000 {
-			phy0: ethernet-phy@0 {
-				interrupts = <3 1 0 0>;
-				reg = <0x1>;
-			};
-			phy1: ethernet-phy@1 {
-				interrupts = <9 1 0 0>;
-				reg = <0x2>;
-			};
-			tbi-phy@2 {
-				device_type = "tbi-phy";
-				reg = <0x2>;
-			};
-		};
-
-		ethernet@b0000 {
-			phy-handle = <&phy0>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		ethernet@b1000 {
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-		};
-	};
-
-	pci0: pcie@fffe09000 {
-		reg = <0xf 0xffe09000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@fffe0a000 {
-		reg = <0xf 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
-		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci2: pcie@fffe0b000 {
-		reg = <0xf 0xffe0b000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "fsl/p1022si-post.dtsi"

arch/powerpc/boot/dts/p1022ds.dtsi

@@ -0,0 +1,234 @@
+/*
+ * P1022 DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+	/*
+	 * This node is used to access the pixis via "indirect" mode,
+	 * which is done by writing the pixis register index to chip
+	 * select 0 and the value to/from chip select 1.  Indirect
+	 * mode is the only way to access the pixis when DIU video
+	 * is enabled.  Note that this assumes that the first column
+	 * of the 'ranges' property above is the chip select number.
+	 */
+	board-control@0,0 {
+		compatible = "fsl,p1022ds-indirect-pixis";
+		reg = <0x0 0x0 1	/* CS0 */
+		       0x1 0x0 1>;	/* CS1 */
+		interrupt-parent = <&mpic>;
+		interrupts = <8 0 0 0>;
+	};
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			reg = <0x0 0x03000000>;
+			label = "ramdisk-nor";
+			read-only;
+		};
+
+		partition@3000000 {
+			reg = <0x03000000 0x00e00000>;
+			label = "diagnostic-nor";
+			read-only;
+		};
+
+		partition@3e00000 {
+			reg = <0x03e00000 0x00200000>;
+			label = "dink-nor";
+			read-only;
+		};
+
+		partition@4000000 {
+			reg = <0x04000000 0x00400000>;
+			label = "kernel-nor";
+			read-only;
+		};
+
+		partition@4400000 {
+			reg = <0x04400000 0x03b00000>;
+			label = "jffs2-nor";
+		};
+
+		partition@7f00000 {
+			reg = <0x07f00000 0x00080000>;
+			label = "dtb-nor";
+			read-only;
+		};
+
+		partition@7f80000 {
+			reg = <0x07f80000 0x00080000>;
+			label = "u-boot-nor";
+			read-only;
+		};
+	};
+
+	nand@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,elbc-fcm-nand";
+		reg = <0x2 0x0 0x40000>;
+
+		partition@0 {
+			reg = <0x0 0x02000000>;
+			label = "u-boot-nand";
+			read-only;
+		};
+
+		partition@2000000 {
+			reg = <0x02000000 0x10000000>;
+			label = "jffs2-nand";
+		};
+
+		partition@12000000 {
+			reg = <0x12000000 0x10000000>;
+			label = "ramdisk-nand";
+			read-only;
+		};
+
+		partition@22000000 {
+			reg = <0x22000000 0x04000000>;
+			label = "kernel-nand";
+		};
+
+		partition@26000000 {
+			reg = <0x26000000 0x01000000>;
+			label = "dtb-nand";
+			read-only;
+		};
+
+		partition@27000000 {
+			reg = <0x27000000 0x19000000>;
+			label = "reserved-nand";
+		};
+	};
+
+	board-control@3,0 {
+		compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
+		reg = <3 0 0x30>;
+		interrupt-parent = <&mpic>;
+		/*
+		 * IRQ8 is generated if the "EVENT" switch is pressed
+		 * and PX_CTL[EVESEL] is set to 00.
+		 */
+		interrupts = <8 0 0 0>;
+	};
+};
+
+&board_soc {
+	i2c@3100 {
+		wm8776:codec@1a {
+			compatible = "wlf,wm8776";
+			reg = <0x1a>;
+			/*
+			 * clock-frequency will be set by U-Boot if
+			 * the clock is enabled.
+			 */
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801";
+			reg = <0>;
+			spi-max-frequency = <40000000>; /* input clock */
+
+			partition@0 {
+				label = "u-boot-spi";
+				reg = <0x00000000 0x00100000>;
+				read-only;
+			};
+			partition@100000 {
+				label = "kernel-spi";
+				reg = <0x00100000 0x00500000>;
+				read-only;
+			};
+			partition@600000 {
+				label = "dtb-spi";
+				reg = <0x00600000 0x00100000>;
+				read-only;
+			};
+			partition@700000 {
+				label = "file system-spi";
+				reg = <0x00700000 0x00900000>;
+			};
+		};
+	};
+
+	ssi@15000 {
+		fsl,mode = "i2s-slave";
+		codec-handle = <&wm8776>;
+		fsl,ssi-asynchronous;
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	usb@23000 {
+		status = "disabled";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupts = <3 1 0 0>;
+			reg = <0x1>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <9 1 0 0>;
+			reg = <0x2>;
+		};
+		tbi-phy@2 {
+			device_type = "tbi-phy";
+			reg = <0x2>;
+		};
+	};
+
+	ethernet@b0000 {
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	ethernet@b1000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};

arch/powerpc/boot/dts/p1022ds_32b.dts

@@ -0,0 +1,103 @@
+/*
+ * P1022 DS 32-bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1022si-pre.dtsi"
+/ {
+	model = "fsl,P1022DS";
+	compatible = "fsl,P1022DS";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_lbc: lbc: localbus@ffe05000 {
+		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
+			  0x1 0x0 0x0 0xe0000000 0x08000000
+			  0x2 0x0 0x0 0xff800000 0x00040000
+			  0x3 0x0 0x0 0xffdf0000 0x00008000>;
+		reg = <0x0 0xffe05000 0 0x1000>;
+	};
+
+	board_soc: soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0x0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci2: pcie@ffe0b000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		reg = <0 0xffe0b000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "fsl/p1022si-post.dtsi"
+/include/ "p1022ds.dtsi"

arch/powerpc/boot/dts/p1022ds_36b.dts

@@ -0,0 +1,103 @@
+/*
+ * P1022 DS 36-bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1022si-pre.dtsi"
+/ {
+	model = "fsl,P1022DS";
+	compatible = "fsl,P1022DS";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_lbc: lbc: localbus@fffe05000 {
+		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
+			  0x1 0x0 0xf 0xe0000000 0x08000000
+			  0x2 0x0 0xf 0xff800000 0x00040000
+			  0x3 0x0 0xf 0xffdf0000 0x00008000>;
+		reg = <0xf 0xffe05000 0 0x1000>;
+	};
+
+	board_soc: soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		reg = <0xf 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci2: pcie@fffe0b000 {
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		reg = <0xf 0xffe0b000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "fsl/p1022si-post.dtsi"
+/include/ "p1022ds.dtsi"

arch/powerpc/boot/dts/p1025rdb.dtsi

@@ -0,0 +1,286 @@
+/*
+ * P1025 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x1000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 256KB for Vitesse 7385 Switch firmware */
+			reg = <0x0 0x00040000>;
+			label = "NOR Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@80000 {
+			/* 3.5 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00380000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 11MB for JFFS2 based Root file System */
+			reg = <0x00400000 0x00b00000>;
+			label = "NOR JFFS2 Root File System";
+		};
+
+		partition@f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x00f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,p1025-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x1 0x0 0x40000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND DTB Image";
+		};
+
+		partition@200000 {
+			/* 4MB for Linux Kernel Image */
+			reg = <0x00200000 0x00400000>;
+			label = "NAND Linux Kernel Image";
+		};
+
+		partition@600000 {
+			/* 4MB for Compressed Root file System Image */
+			reg = <0x00600000 0x00400000>;
+			label = "NAND Compressed RFS Image";
+		};
+
+		partition@a00000 {
+			/* 7MB for JFFS2 based Root file System */
+			reg = <0x00a00000 0x00700000>;
+			label = "NAND JFFS2 Root File System";
+		};
+
+		partition@1100000 {
+			/* 15MB for JFFS2 based Root file System */
+			reg = <0x01100000 0x00f00000>;
+			label = "NAND Writable User area";
+		};
+	};
+
+};
+
+&soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "dallas,ds1339";
+			reg = <0x68>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801";
+			reg = <0>;
+			spi-max-frequency = <40000000>; /* input clock */
+
+			partition@u-boot {
+				/* 512KB for u-boot Bootloader Image */
+				reg = <0x0 0x00080000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			partition@dtb {
+				/* 512KB for DTB Image */
+				reg = <0x00080000 0x00080000>;
+				label = "dtb";
+			};
+
+			partition@kernel {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00100000 0x00400000>;
+				label = "kernel";
+			};
+
+			partition@fs {
+				/* 4MB for Compressed RFS Image */
+				reg = <0x00500000 0x00400000>;
+				label = "file system";
+			};
+
+			partition@jffs-fs {
+				/* 7MB for JFFS2 based RFS */
+				reg = <0x00900000 0x00700000>;
+				label = "file system jffs2";
+			};
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	/* USB2 is shared with localbus, so it must be disabled
+	   by default. We can't put 'status = "disabled";' here
+	   since U-Boot doesn't clear the status property when
+	   it enables USB2. OTOH, U-Boot does create a new node
+	   when there isn't any. So, just comment it out.
+	usb@23000 {
+		phy_type = "ulpi";
+	};
+	*/
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupt-parent = <&mpic>;
+			interrupts = <3 1>;
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupt-parent = <&mpic>;
+			interrupts = <2 1>;
+			reg = <0x1>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@25000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26000 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		fixed-link = <1 1 1000 0 0>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	par_io@e0100 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xe0100 0x60>;
+		ranges = <0x0 0xe0100 0x60>;
+		device_type = "par_io";
+		num-ports = <3>;
+		pio1: ucc_pin@01 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+				0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+				0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
+				0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9 */
+				0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
+				0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
+				0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
+				0x0  0xc  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
+				0x0  0x6  0x2  0x0  0x2  0x0    /* ENET1_RXD0_SER1_RXD0 */
+				0x0  0xa  0x2  0x0  0x2  0x0    /* ENET1_RXD1_SER1_RXD1 */
+				0x0  0xe  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
+				0x0  0xf  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
+				0x0  0x5  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
+				0x0  0xd  0x1  0x0  0x2  0x0    /* ENET1_TX_ER */
+				0x0  0x4  0x2  0x0  0x2  0x0    /* ENET1_RX_DV_SER1_CTS_B */
+				0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RX_ER_SER1_CD_B */
+				0x0  0x11 0x2  0x0  0x2  0x0    /* ENET1_CRS */
+				0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
+		};
+
+		pio2: ucc_pin@02 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+				0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+				0x1  0xb  0x2  0x0  0x1  0x0    /* CLK13 */
+				0x1  0x7  0x1  0x0  0x2  0x0    /* ENET5_TXD0_SER5_TXD0 */
+				0x1  0xa  0x1  0x0  0x2  0x0    /* ENET5_TXD1_SER5_TXD1 */
+				0x1  0x6  0x2  0x0  0x2  0x0    /* ENET5_RXD0_SER5_RXD0 */
+				0x1  0x9  0x2  0x0  0x2  0x0    /* ENET5_RXD1_SER5_RXD1 */
+				0x1  0x5  0x1  0x0  0x2  0x0    /* ENET5_TX_EN_SER5_RTS_B */
+				0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
+				0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
+		};
+	};
+};

arch/powerpc/boot/dts/p1025rdb_32b.dts

@@ -0,0 +1,135 @@
+/*
+ * P1025 RDB Device Tree Source (32-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1021si-pre.dtsi"
+/ {
+	model = "fsl,P1025RDB";
+	compatible = "fsl,P1025RDB";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xff800000 0x00040000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe: qe@ffe80000 {
+		ranges = <0x0 0x0 0xffe80000 0x40000>;
+		reg = <0 0xffe80000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+		status = "disabled"; /* no firmware loaded */
+
+		enet3: ucc@2000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			rx-clock-name = "clk12";
+			tx-clock-name = "clk9";
+			pio-handle = <&pio1>;
+			phy-handle = <&qe_phy0>;
+			phy-connection-type = "mii";
+		};
+
+		mdio@2120 {
+			qe_phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <4 1 0 0>;
+				reg = <0x6>;
+				device_type = "ethernet-phy";
+			};
+			qe_phy1: ethernet-phy@03 {
+				interrupt-parent = <&mpic>;
+				interrupts = <5 1 0 0>;
+				reg = <0x3>;
+				device_type = "ethernet-phy";
+			};
+			tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet4: ucc@2400 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			rx-clock-name = "none";
+			tx-clock-name = "clk13";
+			pio-handle = <&pio2>;
+			phy-handle = <&qe_phy1>;
+			phy-connection-type = "rmii";
+		};
+	};
+};
+
+/include/ "p1025rdb.dtsi"
+/include/ "fsl/p1021si-post.dtsi"

arch/powerpc/boot/dts/p1025rdb_36b.dts

@@ -0,0 +1,88 @@
+/*
+ * P1025 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1021si-pre.dtsi"
+/ {
+	model = "fsl,P1025RDB";
+	compatible = "fsl,P1025RDB";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes */
+		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+			  0x1 0x0 0xf 0xff800000 0x00040000>;
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xe 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1025rdb.dtsi"
+/include/ "fsl/p1021si-post.dtsi"

arch/powerpc/boot/dts/p2020rdb-pc.dtsi

@@ -0,0 +1,241 @@
+/*
+ * P2020 RDB-PC Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x1000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 256KB for Vitesse 7385 Switch firmware */
+			reg = <0x0 0x00040000>;
+			label = "NOR Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@80000 {
+			/* 3.5 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00380000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 11MB for JFFS2 based Root file System */
+			reg = <0x00400000 0x00b00000>;
+			label = "NOR JFFS2 Root File System";
+		};
+
+		partition@f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x00f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,p2020-fcm-nand",
+				 "fsl,elbc-fcm-nand";
+		reg = <0x1 0x0 0x40000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND DTB Image";
+		};
+
+		partition@200000 {
+			/* 4MB for Linux Kernel Image */
+			reg = <0x00200000 0x00400000>;
+			label = "NAND Linux Kernel Image";
+		};
+
+		partition@600000 {
+			/* 4MB for Compressed Root file System Image */
+			reg = <0x00600000 0x00400000>;
+			label = "NAND Compressed RFS Image";
+		};
+
+		partition@a00000 {
+			/* 7MB for JFFS2 based Root file System */
+			reg = <0x00a00000 0x00700000>;
+			label = "NAND JFFS2 Root File System";
+		};
+
+		partition@1100000 {
+			/* 15MB for JFFS2 based Root file System */
+			reg = <0x01100000 0x00f00000>;
+			label = "NAND Writable User area";
+		};
+	};
+
+	L2switch@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "vitesse-7385";
+		reg = <0x2 0x0 0x20000>;
+	};
+
+	cpld@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cpld";
+		reg = <0x3 0x0 0x20000>;
+		read-only;
+	};
+};
+
+&soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "pericom,pt7c4338";
+			reg = <0x68>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,m25p80";
+			reg = <0>;
+			spi-max-frequency = <40000000>;
+
+			partition@0 {
+				/* 512KB for u-boot Bootloader Image */
+				reg = <0x0 0x00080000>;
+				label = "SPI U-Boot Image";
+				read-only;
+			};
+
+			partition@80000 {
+				/* 512KB for DTB Image */
+				reg = <0x00080000 0x00080000>;
+				label = "SPI DTB Image";
+			};
+
+			partition@100000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00100000 0x00400000>;
+				label = "SPI Linux Kernel Image";
+			};
+
+			partition@500000 {
+				/* 4MB for Compressed RFS Image */
+				reg = <0x00500000 0x00400000>;
+				label = "SPI Compressed RFS Image";
+			};
+
+			partition@900000 {
+				/* 7MB for JFFS2 based RFS */
+				reg = <0x00900000 0x00700000>;
+				label = "SPI JFFS2 RFS";
+			};
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	mdio@24520 {
+		phy0: ethernet-phy@0 {
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+			};
+		phy1: ethernet-phy@1 {
+			interrupts = <2 1 0 0>;
+			reg = <0x1>;
+			};
+	};
+
+	mdio@25520 {
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26520 {
+		status = "disabled";
+	};
+
+	ptp_clock@24e00 {
+		fsl,tclk-period = <5>;
+		fsl,tmr-prsc = <200>;
+		fsl,tmr-add = <0xCCCCCCCD>;
+		fsl,tmr-fiper1 = <0x3B9AC9FB>;
+		fsl,tmr-fiper2 = <0x0001869B>;
+		fsl,max-adj = <249999999>;
+	};
+
+	enet0: ethernet@24000 {
+		fixed-link = <1 1 1000 0 0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	enet1: ethernet@25000 {
+		tbi-handle = <&tbi0>;
+		phy-handle = <&phy0>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@26000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};

arch/powerpc/boot/dts/p2020rdb-pc_32b.dts

@@ -0,0 +1,96 @@
+/*
+ * P2020 RDB-PC 32Bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p2020si-pre.dtsi"
+
+/ {
+	model = "fsl,P2020RDB";
+	compatible = "fsl,P2020RDB-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		/* NOR and NAND Flashes */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xff800000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000
+			  0x3 0x0 0x0 0xffa00000 0x00020000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe08000 {
+		reg = <0 0xffe08000 0 0x1000>;
+		status = "disabled";
+	};
+
+	pci1: pcie@ffe09000 {
+		reg = <0 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci2: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p2020rdb-pc.dtsi"
+/include/ "fsl/p2020si-post.dtsi"

arch/powerpc/boot/dts/p2020rdb-pc_36b.dts

@@ -0,0 +1,96 @@
+/*
+ * P2020 RDB-PC 36Bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p2020si-pre.dtsi"
+
+/ {
+	model = "fsl,P2020RDB";
+	compatible = "fsl,P2020RDB-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+
+		/* NOR and NAND Flashes */
+		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+			  0x1 0x0 0xf 0xff800000 0x00040000
+			  0x2 0x0 0xf 0xffb00000 0x00020000
+			  0x3 0x0 0xf 0xffa00000 0x00020000>;
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe08000 {
+		reg = <0xf 0xffe08000 0 0x1000>;
+		status = "disabled";
+	};
+
+	pci1: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci2: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p2020rdb-pc.dtsi"
+/include/ "fsl/p2020si-post.dtsi"

arch/powerpc/boot/dts/p2020rdb.dts

@@ -34,7 +34,7 @@
 
 		/* NOR and NAND Flashes */
 		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
-			  0x1 0x0 0x0 0xffa00000 0x00040000
+			  0x1 0x0 0x0 0xff800000 0x00040000
 			  0x2 0x0 0x0 0xffb00000 0x00020000>;
 
 		nor@0,0 {
@@ -157,7 +157,7 @@
 				#size-cells = <1>;
 				compatible = "spansion,s25sl12801";
 				reg = <0>;
-				spi-max-frequency = <50000000>;
+				spi-max-frequency = <40000000>;
 
 				partition@0 {
 					/* 512KB for u-boot Bootloader Image */

arch/powerpc/configs/85xx/ge_imp3a_defconfig

@@ -0,0 +1,257 @@
+CONFIG_PPC_85xx=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_PERF_EVENTS=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_GE_IMP3A=y
+CONFIG_QUICC_ENGINE=y
+CONFIG_QE_GPIO=y
+CONFIG_CPM2=y
+CONFIG_HIGHMEM=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HZ_1000=y
+CONFIG_PREEMPT=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_MATH_EMULATION=y
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_FORCE_MAX_ZONEORDER=17
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_MSI=y
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+CONFIG_YENTA=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NET_PKTGEN=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_MISC_DEVICES=y
+CONFIG_DS1682=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_SIL24=y
+# CONFIG_ATA_SFF is not set
+CONFIG_NETDEVICES=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_TUN=m
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_FS_ENET=y
+CONFIG_UCC_GETH=y
+CONFIG_GIANFAR=y
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_QE=m
+CONFIG_NVRAM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_CPM=m
+CONFIG_I2C_MPC=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GE_FPGA=y
+CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_LM92=y
+CONFIG_WATCHDOG=y
+CONFIG_GEF_WDT=y
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_HID_DRAGONRISE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_ORTEK=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+CONFIG_HID_SMARTJOYPLUS=y
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+CONFIG_HID_ZEROPLUS=y
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_STORAGE=y
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_MPC85XX=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_INTF_PROC is not set
+CONFIG_RTC_DRV_RX8581=y
+CONFIG_DMADEVICES=y
+CONFIG_FSL_DMA=y
+# CONFIG_NET_DMA is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_NTFS_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V4=y
+CONFIG_CIFS=m
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_T10DIF=y
+CONFIG_LIBCRC32C=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_TALITOS=y

arch/powerpc/configs/86xx/gef_ppc9a_defconfig

@@ -131,6 +131,7 @@ CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MPC=y
 CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GE_FPGA=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM92=y
 CONFIG_WATCHDOG=y

arch/powerpc/configs/86xx/gef_sbc310_defconfig

@@ -132,6 +132,7 @@ CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MPC=y
 CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GE_FPGA=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM92=y
 CONFIG_WATCHDOG=y

arch/powerpc/configs/86xx/gef_sbc610_defconfig

@@ -183,6 +183,8 @@ CONFIG_NVRAM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MPC=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GE_FPGA=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM92=y
 CONFIG_WATCHDOG=y

arch/powerpc/configs/mpc85xx_defconfig

@@ -1,4 +1,5 @@
 CONFIG_PPC_85xx=y
+CONFIG_PHYS_64BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y

arch/powerpc/configs/mpc85xx_smp_defconfig

@@ -1,4 +1,5 @@
 CONFIG_PPC_85xx=y
+CONFIG_PHYS_64BIT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=8
 CONFIG_EXPERIMENTAL=y

arch/powerpc/include/asm/cputable.h

@@ -390,6 +390,10 @@ extern const char *powerpc_base_platform;
 	    CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \
 	    CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
 	    CPU_FTR_DEBUG_LVL_EXC)
+#define CPU_FTRS_E6500	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \
+	    CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \
+	    CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
+	    CPU_FTR_DEBUG_LVL_EXC)
 #define CPU_FTRS_GENERIC_32	(CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
 
 /* 64-bit CPUs */
@@ -442,7 +446,7 @@ extern const char *powerpc_base_platform;
 
 #ifdef __powerpc64__
 #ifdef CONFIG_PPC_BOOK3E
-#define CPU_FTRS_POSSIBLE	(CPU_FTRS_E5500 | CPU_FTRS_A2)
+#define CPU_FTRS_POSSIBLE	(CPU_FTRS_E6500 | CPU_FTRS_E5500 | CPU_FTRS_A2)
 #else
 #define CPU_FTRS_POSSIBLE	\
 	    (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 |	\
@@ -483,7 +487,7 @@ enum {
 #endif
 #ifdef CONFIG_E500
 	    CPU_FTRS_E500 | CPU_FTRS_E500_2 | CPU_FTRS_E500MC |
-	    CPU_FTRS_E5500 |
+	    CPU_FTRS_E5500 | CPU_FTRS_E6500 |
 #endif
 	    0,
 };
@@ -491,7 +495,7 @@ enum {
 
 #ifdef __powerpc64__
 #ifdef CONFIG_PPC_BOOK3E
-#define CPU_FTRS_ALWAYS		(CPU_FTRS_E5500 & CPU_FTRS_A2)
+#define CPU_FTRS_ALWAYS		(CPU_FTRS_E6500 & CPU_FTRS_E5500 & CPU_FTRS_A2)
 #else
 #define CPU_FTRS_ALWAYS		\
 	    (CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 &	\
@@ -528,7 +532,7 @@ enum {
 #endif
 #ifdef CONFIG_E500
 	    CPU_FTRS_E500 & CPU_FTRS_E500_2 & CPU_FTRS_E500MC &
-	    CPU_FTRS_E5500 &
+	    CPU_FTRS_E5500 & CPU_FTRS_E6500 &
 #endif
 	    CPU_FTRS_POSSIBLE,
 };

arch/powerpc/include/asm/fsl_guts.h

@@ -4,7 +4,7 @@
  * Authors: Jeff Brown
  *          Timur Tabi <timur@freescale.com>
  *
- * Copyright 2004,2007 Freescale Semiconductor, Inc
+ * Copyright 2004,2007,2012 Freescale Semiconductor, Inc
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -114,6 +114,10 @@ struct ccsr_guts_86xx {
 	__be32	srds2cr1;	/* 0x.0f44 - SerDes2 Control Register 0 */
 } __attribute__ ((packed));
 
+
+/* Alternate function signal multiplex control */
+#define MPC85xx_PMUXCR_QE(x) (0x8000 >> (x))
+
 #ifdef CONFIG_PPC_86xx
 
 #define CCSR_GUTS_DMACR_DEV_SSI	0	/* DMA controller/channel set to SSI */

arch/powerpc/include/asm/mpic_msgr.h

@@ -0,0 +1,132 @@
+/*
+ * Copyright 2011-2012, Meador Inge, Mentor Graphics Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+
+#ifndef _ASM_MPIC_MSGR_H
+#define _ASM_MPIC_MSGR_H
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+
+struct mpic_msgr {
+	u32 __iomem *base;
+	u32 __iomem *mer;
+	int irq;
+	unsigned char in_use;
+	raw_spinlock_t lock;
+	int num;
+};
+
+/* Get a message register
+ *
+ * @reg_num:	the MPIC message register to get
+ *
+ * A pointer to the message register is returned.  If
+ * the message register asked for is already in use, then
+ * EBUSY is returned.  If the number given is not associated
+ * with an actual message register, then ENODEV is returned.
+ * Successfully getting the register marks it as in use.
+ */
+extern struct mpic_msgr *mpic_msgr_get(unsigned int reg_num);
+
+/* Relinquish a message register
+ *
+ * @msgr:	the message register to return
+ *
+ * Disables the given message register and marks it as free.
+ * After this call has completed successully the message
+ * register is available to be acquired by a call to
+ * mpic_msgr_get.
+ */
+extern void mpic_msgr_put(struct mpic_msgr *msgr);
+
+/* Enable a message register
+ *
+ * @msgr:	the message register to enable
+ *
+ * The given message register is enabled for sending
+ * messages.
+ */
+extern void mpic_msgr_enable(struct mpic_msgr *msgr);
+
+/* Disable a message register
+ *
+ * @msgr:	the message register to disable
+ *
+ * The given message register is disabled for sending
+ * messages.
+ */
+extern void mpic_msgr_disable(struct mpic_msgr *msgr);
+
+/* Write a message to a message register
+ *
+ * @msgr:	the message register to write to
+ * @message:	the message to write
+ *
+ * The given 32-bit message is written to the given message
+ * register.  Writing to an enabled message registers fires
+ * an interrupt.
+ */
+static inline void mpic_msgr_write(struct mpic_msgr *msgr, u32 message)
+{
+	out_be32(msgr->base, message);
+}
+
+/* Read a message from a message register
+ *
+ * @msgr:	the message register to read from
+ *
+ * Returns the 32-bit value currently in the given message register.
+ * Upon reading the register any interrupts for that register are
+ * cleared.
+ */
+static inline u32 mpic_msgr_read(struct mpic_msgr *msgr)
+{
+	return in_be32(msgr->base);
+}
+
+/* Clear a message register
+ *
+ * @msgr:	the message register to clear
+ *
+ * Clears any interrupts associated with the given message register.
+ */
+static inline void mpic_msgr_clear(struct mpic_msgr *msgr)
+{
+	(void) mpic_msgr_read(msgr);
+}
+
+/* Set the destination CPU for the message register
+ *
+ * @msgr:	the message register whose destination is to be set
+ * @cpu_num:	the Linux CPU number to bind the message register to
+ *
+ * Note that the CPU number given is the CPU number used by the kernel
+ * and *not* the actual hardware CPU number.
+ */
+static inline void mpic_msgr_set_destination(struct mpic_msgr *msgr,
+					     u32 cpu_num)
+{
+	out_be32(msgr->base, 1 << get_hard_smp_processor_id(cpu_num));
+}
+
+/* Get the IRQ number for the message register
+ * @msgr:	the message register whose IRQ is to be returned
+ *
+ * Returns the IRQ number associated with the given message register.
+ * NO_IRQ is returned if this message register is not capable of
+ * receiving interrupts.  What message register can and cannot receive
+ * interrupts is specified in the device tree for the system.
+ */
+static inline int mpic_msgr_get_irq(struct mpic_msgr *msgr)
+{
+	return msgr->irq;
+}
+
+#endif

arch/powerpc/include/asm/reg_booke.h

@@ -62,6 +62,7 @@
 #define SPRN_DVC2	0x13F	/* Data Value Compare Register 2 */
 #define SPRN_MAS8	0x155	/* MMU Assist Register 8 */
 #define SPRN_TLB0PS	0x158	/* TLB 0 Page Size Register */
+#define SPRN_TLB1PS	0x159	/* TLB 1 Page Size Register */
 #define SPRN_MAS5_MAS6	0x15c	/* MMU Assist Register 5 || 6 */
 #define SPRN_MAS8_MAS1	0x15d	/* MMU Assist Register 8 || 1 */
 #define SPRN_EPTCFG	0x15e	/* Embedded Page Table Config */

arch/powerpc/kernel/cputable.c

@@ -2019,6 +2019,24 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_e500mc,
 		.platform		= "ppce5500",
 	},
+	{	/* e6500 */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x80400000,
+		.cpu_name		= "e6500",
+		.cpu_features		= CPU_FTRS_E6500,
+		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+		.mmu_features		= MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS |
+			MMU_FTR_USE_TLBILX,
+		.icache_bsize		= 64,
+		.dcache_bsize		= 64,
+		.num_pmcs		= 4,
+		.oprofile_cpu_type	= "ppc/e6500",
+		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
+		.cpu_setup		= __setup_cpu_e5500,
+		.cpu_restore		= __restore_cpu_e5500,
+		.machine_check		= machine_check_e500mc,
+		.platform		= "ppce6500",
+	},
 #ifdef CONFIG_PPC32
 	{	/* default match */
 		.pvr_mask		= 0x00000000,

arch/powerpc/mm/fsl_booke_mmu.c

@@ -149,12 +149,19 @@ static void settlbcam(int index, unsigned long virt, phys_addr_t phys,
 unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
 			  phys_addr_t phys)
 {
-	unsigned int camsize = __ilog2(ram) & ~1U;
-	unsigned int align = __ffs(virt | phys) & ~1U;
-	unsigned long max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf;
-
-	/* Convert (4^max) kB to (2^max) bytes */
-	max_cam = max_cam * 2 + 10;
+	unsigned int camsize = __ilog2(ram);
+	unsigned int align = __ffs(virt | phys);
+	unsigned long max_cam;
+
+	if ((mfspr(SPRN_MMUCFG) & MMUCFG_MAVN) == MMUCFG_MAVN_V1) {
+		/* Convert (4^max) kB to (2^max) bytes */
+		max_cam = ((mfspr(SPRN_TLB1CFG) >> 16) & 0xf) * 2 + 10;
+		camsize &= ~1U;
+		align &= ~1U;
+	} else {
+		/* Convert (2^max) kB to (2^max) bytes */
+		max_cam = __ilog2(mfspr(SPRN_TLB1PS)) + 10;
+	}
 
 	if (camsize > align)
 		camsize = align;

arch/powerpc/platforms/85xx/Kconfig

@@ -6,6 +6,7 @@ menuconfig FSL_SOC_BOOKE
 	select MPIC
 	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
+	select SERIAL_8250_EXTENDED if SERIAL_8250
 	select SERIAL_8250_SHARE_IRQ if SERIAL_8250
 	default y
 
@@ -13,6 +14,15 @@ if FSL_SOC_BOOKE
 
 if PPC32
 
+config FSL_85XX_CACHE_SRAM
+	bool
+	select PPC_LIB_RHEAP
+	help
+	  When selected, this option enables cache-sram support
+	  for memory allocation on P1/P2 QorIQ platforms.
+	  cache-sram-size and cache-sram-offset kernel boot
+	  parameters should be passed when this option is enabled.
+
 config MPC8540_ADS
 	bool "Freescale MPC8540 ADS"
 	select DEFAULT_UIMAGE
@@ -30,6 +40,7 @@ config MPC85xx_CDS
 	bool "Freescale MPC85xx CDS"
 	select DEFAULT_UIMAGE
 	select PPC_I8259
+	select HAS_RAPIDIO
 	help
 	  This option enables support for the MPC85xx CDS board
 
@@ -80,7 +91,6 @@ config P1010_RDB
 config P1022_DS
 	bool "Freescale P1022 DS"
 	select DEFAULT_UIMAGE
-	select PHYS_64BIT	# The DTS has 36-bit addresses
 	select SWIOTLB
 	help
 	  This option enables support for the Freescale P1022DS reference board.
@@ -171,6 +181,21 @@ config SBC8560
 	help
 	  This option enables support for the Wind River SBC8560 board
 
+config GE_IMP3A
+	bool "GE Intelligent Platforms IMP3A"
+	select DEFAULT_UIMAGE
+	select SWIOTLB
+	select MMIO_NVRAM
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select GE_FPGA
+	help
+	  This option enables support for the GE Intelligent Platforms IMP3A
+	  board.
+
+	  This board is a 3U CompactPCI Single Board Computer with a Freescale
+	  P2020 processor.
+
 config P2041_RDB
 	bool "Freescale P2041 RDB"
 	select DEFAULT_UIMAGE

arch/powerpc/platforms/85xx/Makefile

@@ -27,3 +27,4 @@ obj-$(CONFIG_SBC8548)     += sbc8548.o
 obj-$(CONFIG_SOCRATES)    += socrates.o socrates_fpga_pic.o
 obj-$(CONFIG_KSI8560)	  += ksi8560.o
 obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
+obj-$(CONFIG_GE_IMP3A)	  += ge_imp3a.o

arch/powerpc/platforms/85xx/ge_imp3a.c

@@ -0,0 +1,246 @@
+/*
+ * GE IMP3A Board Setup
+ *
+ * Author Martyn Welch <martyn.welch@ge.com>
+ *
+ * Copyright 2010 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Based on: mpc85xx_ds.c (MPC85xx DS Board Setup)
+ * Copyright 2007 Freescale Semiconductor Inc.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+#include <linux/memblock.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <asm/swiotlb.h>
+#include <asm/nvram.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
+#include <sysdev/ge/ge_pic.h>
+
+void __iomem *imp3a_regs;
+
+void __init ge_imp3a_pic_init(void)
+{
+	struct mpic *mpic;
+	struct device_node *np;
+	struct device_node *cascade_node = NULL;
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS-CAMP")) {
+		mpic = mpic_alloc(NULL, 0,
+			MPIC_NO_RESET |
+			MPIC_BIG_ENDIAN |
+			MPIC_SINGLE_DEST_CPU,
+			0, 256, " OpenPIC  ");
+	} else {
+		mpic = mpic_alloc(NULL, 0,
+			  MPIC_BIG_ENDIAN |
+			  MPIC_SINGLE_DEST_CPU,
+			0, 256, " OpenPIC  ");
+	}
+
+	BUG_ON(mpic == NULL);
+	mpic_init(mpic);
+	/*
+	 * There is a simple interrupt handler in the main FPGA, this needs
+	 * to be cascaded into the MPIC
+	 */
+	for_each_node_by_type(np, "interrupt-controller")
+		if (of_device_is_compatible(np, "gef,fpga-pic-1.00")) {
+			cascade_node = np;
+			break;
+		}
+
+	if (cascade_node == NULL) {
+		printk(KERN_WARNING "IMP3A: No FPGA PIC\n");
+		return;
+	}
+
+	gef_pic_init(cascade_node);
+	of_node_put(cascade_node);
+}
+
+#ifdef CONFIG_PCI
+static int primary_phb_addr;
+#endif	/* CONFIG_PCI */
+
+/*
+ * Setup the architecture
+ */
+static void __init ge_imp3a_setup_arch(void)
+{
+	struct device_node *regs;
+#ifdef CONFIG_PCI
+	struct device_node *np;
+	struct pci_controller *hose;
+#endif
+	dma_addr_t max = 0xffffffff;
+
+	if (ppc_md.progress)
+		ppc_md.progress("ge_imp3a_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for_each_node_by_type(np, "pci") {
+		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
+		    of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
+		    of_device_is_compatible(np, "fsl,p2020-pcie")) {
+			struct resource rsrc;
+			of_address_to_resource(np, 0, &rsrc);
+			if ((rsrc.start & 0xfffff) == primary_phb_addr)
+				fsl_add_bridge(np, 1);
+			else
+				fsl_add_bridge(np, 0);
+
+			hose = pci_find_hose_for_OF_device(np);
+			max = min(max, hose->dma_window_base_cur +
+					hose->dma_window_size);
+		}
+	}
+#endif
+
+	mpc85xx_smp_init();
+
+#ifdef CONFIG_SWIOTLB
+	if (memblock_end_of_DRAM() > max) {
+		ppc_swiotlb_enable = 1;
+		set_pci_dma_ops(&swiotlb_dma_ops);
+		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+	}
+#endif
+
+	/* Remap basic board registers */
+	regs = of_find_compatible_node(NULL, NULL, "ge,imp3a-fpga-regs");
+	if (regs) {
+		imp3a_regs = of_iomap(regs, 0);
+		if (imp3a_regs == NULL)
+			printk(KERN_WARNING "Unable to map board registers\n");
+		of_node_put(regs);
+	}
+
+#if defined(CONFIG_MMIO_NVRAM)
+	mmio_nvram_init();
+#endif
+
+	printk(KERN_INFO "GE Intelligent Platforms IMP3A 3U cPCI SBC\n");
+}
+
+/* Return the PCB revision */
+static unsigned int ge_imp3a_get_pcb_rev(void)
+{
+	unsigned int reg;
+
+	reg = ioread16(imp3a_regs);
+	return (reg >> 8) & 0xff;
+}
+
+/* Return the board (software) revision */
+static unsigned int ge_imp3a_get_board_rev(void)
+{
+	unsigned int reg;
+
+	reg = ioread16(imp3a_regs + 0x2);
+	return reg & 0xff;
+}
+
+/* Return the FPGA revision */
+static unsigned int ge_imp3a_get_fpga_rev(void)
+{
+	unsigned int reg;
+
+	reg = ioread16(imp3a_regs + 0x2);
+	return (reg >> 8) & 0xff;
+}
+
+/* Return compactPCI Geographical Address */
+static unsigned int ge_imp3a_get_cpci_geo_addr(void)
+{
+	unsigned int reg;
+
+	reg = ioread16(imp3a_regs + 0x6);
+	return (reg & 0x0f00) >> 8;
+}
+
+/* Return compactPCI System Controller Status */
+static unsigned int ge_imp3a_get_cpci_is_syscon(void)
+{
+	unsigned int reg;
+
+	reg = ioread16(imp3a_regs + 0x6);
+	return reg & (1 << 12);
+}
+
+static void ge_imp3a_show_cpuinfo(struct seq_file *m)
+{
+	seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
+
+	seq_printf(m, "Revision\t: %u%c\n", ge_imp3a_get_pcb_rev(),
+		('A' + ge_imp3a_get_board_rev() - 1));
+
+	seq_printf(m, "FPGA Revision\t: %u\n", ge_imp3a_get_fpga_rev());
+
+	seq_printf(m, "cPCI geo. addr\t: %u\n", ge_imp3a_get_cpci_geo_addr());
+
+	seq_printf(m, "cPCI syscon\t: %s\n",
+		ge_imp3a_get_cpci_is_syscon() ? "yes" : "no");
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init ge_imp3a_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "ge,IMP3A")) {
+#ifdef CONFIG_PCI
+		primary_phb_addr = 0x9000;
+#endif
+		return 1;
+	}
+
+	return 0;
+}
+
+machine_device_initcall(ge_imp3a, mpc85xx_common_publish_devices);
+
+machine_arch_initcall(ge_imp3a, swiotlb_setup_bus_notifier);
+
+define_machine(ge_imp3a) {
+	.name			= "GE_IMP3A",
+	.probe			= ge_imp3a_probe,
+	.setup_arch		= ge_imp3a_setup_arch,
+	.init_IRQ		= ge_imp3a_pic_init,
+	.show_cpuinfo		= ge_imp3a_show_cpuinfo,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};

arch/powerpc/platforms/85xx/mpc85xx_cds.c

@@ -3,7 +3,7 @@
  *
  * Maintained by Kumar Gala (see MAINTAINERS for contact information)
  *
- * Copyright 2005 Freescale Semiconductor Inc.
+ * Copyright 2005, 2011-2012 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -48,17 +48,24 @@
 
 #include "mpc85xx.h"
 
-/* CADMUS info */
-/* xxx - galak, move into device tree */
-#define CADMUS_BASE (0xf8004000)
-#define CADMUS_SIZE (256)
-#define CM_VER	(0)
-#define CM_CSR	(1)
-#define CM_RST	(2)
-
+/*
+ * The CDS board contains an FPGA/CPLD called "Cadmus", which collects
+ * various logic and performs system control functions.
+ * Here is the FPGA/CPLD register map.
+ */
+struct cadmus_reg {
+	u8 cm_ver;		/* Board version */
+	u8 cm_csr;		/* General control/status */
+	u8 cm_rst;		/* Reset control */
+	u8 cm_hsclk;	/* High speed clock */
+	u8 cm_hsxclk;	/* High speed clock extended */
+	u8 cm_led;		/* LED data */
+	u8 cm_pci;		/* PCI control/status */
+	u8 cm_dma;		/* DMA control */
+	u8 res[248];	/* Total 256 bytes */
+};
 
-static int cds_pci_slot = 2;
-static volatile u8 *cadmus;
+static struct cadmus_reg *cadmus;
 
 #ifdef CONFIG_PCI
 
@@ -158,6 +165,33 @@ DECLARE_PCI_FIXUP_EARLY(0x1957, 0x3fff, skip_fake_bridge);
 DECLARE_PCI_FIXUP_EARLY(0x3fff, 0x1957, skip_fake_bridge);
 DECLARE_PCI_FIXUP_EARLY(0xff3f, 0x5719, skip_fake_bridge);
 
+#define PCI_DEVICE_ID_IDT_TSI310	0x01a7
+
+/*
+ * Fix Tsi310 PCI-X bridge resource.
+ * Force the bridge to open a window from 0x0000-0x1fff in PCI I/O space.
+ * This allows legacy I/O(i8259, etc) on the VIA southbridge to be accessed.
+ */
+void mpc85xx_cds_fixup_bus(struct pci_bus *bus)
+{
+	struct pci_dev *dev = bus->self;
+	struct resource *res = bus->resource[0];
+
+	if (dev != NULL &&
+	    dev->vendor == PCI_VENDOR_ID_IBM &&
+	    dev->device == PCI_DEVICE_ID_IDT_TSI310) {
+		if (res) {
+			res->start = 0;
+			res->end   = 0x1fff;
+			res->flags = IORESOURCE_IO;
+			pr_info("mpc85xx_cds: PCI bridge resource fixup applied\n");
+			pr_info("mpc85xx_cds: %pR\n", res);
+		}
+	}
+
+	fsl_pcibios_fixup_bus(bus);
+}
+
 #ifdef CONFIG_PPC_I8259
 static void mpc85xx_8259_cascade_handler(unsigned int irq,
 					 struct irq_desc *desc)
@@ -248,20 +282,30 @@ machine_device_initcall(mpc85xx_cds, mpc85xx_cds_8259_attach);
  */
 static void __init mpc85xx_cds_setup_arch(void)
 {
-#ifdef CONFIG_PCI
 	struct device_node *np;
-#endif
+	int cds_pci_slot;
 
 	if (ppc_md.progress)
 		ppc_md.progress("mpc85xx_cds_setup_arch()", 0);
 
-	cadmus = ioremap(CADMUS_BASE, CADMUS_SIZE);
-	cds_pci_slot = ((cadmus[CM_CSR] >> 6) & 0x3) + 1;
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc8548cds-fpga");
+	if (!np) {
+		pr_err("Could not find FPGA node.\n");
+		return;
+	}
+
+	cadmus = of_iomap(np, 0);
+	of_node_put(np);
+	if (!cadmus) {
+		pr_err("Fail to map FPGA area.\n");
+		return;
+	}
 
 	if (ppc_md.progress) {
 		char buf[40];
+		cds_pci_slot = ((in_8(&cadmus->cm_csr) >> 6) & 0x3) + 1;
 		snprintf(buf, 40, "CDS Version = 0x%x in slot %d\n",
-				cadmus[CM_VER], cds_pci_slot);
+				in_8(&cadmus->cm_ver), cds_pci_slot);
 		ppc_md.progress(buf, 0);
 	}
 
@@ -291,7 +335,8 @@ static void mpc85xx_cds_show_cpuinfo(struct seq_file *m)
 	svid = mfspr(SPRN_SVR);
 
 	seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
-	seq_printf(m, "Machine\t\t: MPC85xx CDS (0x%x)\n", cadmus[CM_VER]);
+	seq_printf(m, "Machine\t\t: MPC85xx CDS (0x%x)\n",
+			in_8(&cadmus->cm_ver));
 	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
 	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
 
@@ -322,7 +367,7 @@ define_machine(mpc85xx_cds) {
 	.get_irq	= mpic_get_irq,
 #ifdef CONFIG_PCI
 	.restart	= mpc85xx_cds_restart,
-	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_bus	= mpc85xx_cds_fixup_bus,
 #else
 	.restart	= fsl_rstcr_restart,
 #endif

arch/powerpc/platforms/85xx/mpc85xx_mds.c

@@ -1,5 +1,6 @@
 /*
- * Copyright (C) Freescale Semicondutor, Inc. 2006-2010. All rights reserved.
+ * Copyright (C) 2006-2010, 2012 Freescale Semicondutor, Inc.
+ * All rights reserved.
  *
  * Author: Andy Fleming <afleming@freescale.com>
  *
@@ -51,6 +52,7 @@
 #include <asm/qe_ic.h>
 #include <asm/mpic.h>
 #include <asm/swiotlb.h>
+#include <asm/fsl_guts.h>
 #include "smp.h"
 
 #include "mpc85xx.h"
@@ -268,34 +270,27 @@ static void __init mpc85xx_mds_qe_init(void)
 	mpc85xx_mds_reset_ucc_phys();
 
 	if (machine_is(p1021_mds)) {
-#define MPC85xx_PMUXCR_OFFSET           0x60
-#define MPC85xx_PMUXCR_QE0              0x00008000
-#define MPC85xx_PMUXCR_QE3              0x00001000
-#define MPC85xx_PMUXCR_QE9              0x00000040
-#define MPC85xx_PMUXCR_QE12             0x00000008
-		static __be32 __iomem *pmuxcr;
 
-		np = of_find_node_by_name(NULL, "global-utilities");
+		struct ccsr_guts_85xx __iomem *guts;
 
+		np = of_find_node_by_name(NULL, "global-utilities");
 		if (np) {
-			pmuxcr = of_iomap(np, 0) + MPC85xx_PMUXCR_OFFSET;
-
-			if (!pmuxcr)
-				printk(KERN_EMERG "Error: Alternate function"
-					" signal multiplex control register not"
-					" mapped!\n");
-			else
+			guts = of_iomap(np, 0);
+			if (!guts)
+				pr_err("mpc85xx-rdb: could not map global utilities register\n");
+			else{
 			/* P1021 has pins muxed for QE and other functions. To
 			 * enable QE UEC mode, we need to set bit QE0 for UCC1
 			 * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
 			 * and QE12 for QE MII management signals in PMUXCR
 			 * register.
 			 */
-				setbits32(pmuxcr, MPC85xx_PMUXCR_QE0 |
-						  MPC85xx_PMUXCR_QE3 |
-						  MPC85xx_PMUXCR_QE9 |
-						  MPC85xx_PMUXCR_QE12);
-
+				setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) |
+						  MPC85xx_PMUXCR_QE(3) |
+						  MPC85xx_PMUXCR_QE(9) |
+						  MPC85xx_PMUXCR_QE(12));
+				iounmap(guts);
+			}
 			of_node_put(np);
 		}
 

arch/powerpc/platforms/85xx/mpc85xx_rdb.c

@@ -1,7 +1,7 @@
 /*
  * MPC85xx RDB Board Setup
  *
- * Copyright 2009 Freescale Semiconductor Inc.
+ * Copyright 2009,2012 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -26,6 +26,9 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <asm/mpic.h>
+#include <asm/qe.h>
+#include <asm/qe_ic.h>
+#include <asm/fsl_guts.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
@@ -47,6 +50,10 @@ void __init mpc85xx_rdb_pic_init(void)
 	struct mpic *mpic;
 	unsigned long root = of_get_flat_dt_root();
 
+#ifdef CONFIG_QUICC_ENGINE
+	struct device_node *np;
+#endif
+
 	if (of_flat_dt_is_compatible(root, "fsl,MPC85XXRDB-CAMP")) {
 		mpic = mpic_alloc(NULL, 0, MPIC_NO_RESET |
 			MPIC_BIG_ENDIAN |
@@ -61,6 +68,18 @@ void __init mpc85xx_rdb_pic_init(void)
 
 	BUG_ON(mpic == NULL);
 	mpic_init(mpic);
+
+#ifdef CONFIG_QUICC_ENGINE
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+	if (np) {
+		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
+				qe_ic_cascade_high_mpic);
+		of_node_put(np);
+
+	} else
+		pr_err("%s: Could not find qe-ic node\n", __func__);
+#endif
+
 }
 
 /*
@@ -68,7 +87,7 @@ void __init mpc85xx_rdb_pic_init(void)
  */
 static void __init mpc85xx_rdb_setup_arch(void)
 {
-#ifdef CONFIG_PCI
+#if defined(CONFIG_PCI) || defined(CONFIG_QUICC_ENGINE)
 	struct device_node *np;
 #endif
 
@@ -84,11 +103,73 @@ static void __init mpc85xx_rdb_setup_arch(void)
 #endif
 
 	mpc85xx_smp_init();
+
+#ifdef CONFIG_QUICC_ENGINE
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
+	if (!np) {
+		pr_err("%s: Could not find Quicc Engine node\n", __func__);
+		goto qe_fail;
+	}
+
+	qe_reset();
+	of_node_put(np);
+
+	np = of_find_node_by_name(NULL, "par_io");
+	if (np) {
+		struct device_node *ucc;
+
+		par_io_init(np);
+		of_node_put(np);
+
+		for_each_node_by_name(ucc, "ucc")
+			par_io_of_config(ucc);
+
+	}
+#if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE)
+	if (machine_is(p1025_rdb)) {
+
+		struct ccsr_guts_85xx __iomem *guts;
+
+		np = of_find_node_by_name(NULL, "global-utilities");
+		if (np) {
+			guts = of_iomap(np, 0);
+			if (!guts) {
+
+				pr_err("mpc85xx-rdb: could not map global utilities register\n");
+
+			} else {
+			/* P1025 has pins muxed for QE and other functions. To
+			* enable QE UEC mode, we need to set bit QE0 for UCC1
+			* in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
+			* and QE12 for QE MII management singals in PMUXCR
+			* register.
+			*/
+				setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) |
+						MPC85xx_PMUXCR_QE(3) |
+						MPC85xx_PMUXCR_QE(9) |
+						MPC85xx_PMUXCR_QE(12));
+				iounmap(guts);
+			}
+			of_node_put(np);
+		}
+
+	}
+#endif
+
+qe_fail:
+#endif	/* CONFIG_QUICC_ENGINE */
+
 	printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n");
 }
 
 machine_device_initcall(p2020_rdb, mpc85xx_common_publish_devices);
+machine_device_initcall(p2020_rdb_pc, mpc85xx_common_publish_devices);
+machine_device_initcall(p1020_mbg_pc, mpc85xx_common_publish_devices);
 machine_device_initcall(p1020_rdb, mpc85xx_common_publish_devices);
+machine_device_initcall(p1020_rdb_pc, mpc85xx_common_publish_devices);
+machine_device_initcall(p1020_utm_pc, mpc85xx_common_publish_devices);
+machine_device_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices);
+machine_device_initcall(p1025_rdb, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
@@ -111,6 +192,52 @@ static int __init p1020_rdb_probe(void)
 	return 0;
 }
 
+static int __init p1020_rdb_pc_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,P1020RDB-PC");
+}
+
+static int __init p1021_rdb_pc_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "fsl,P1021RDB-PC"))
+		return 1;
+	return 0;
+}
+
+static int __init p2020_rdb_pc_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "fsl,P2020RDB-PC"))
+		return 1;
+	return 0;
+}
+
+static int __init p1025_rdb_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,P1025RDB");
+}
+
+static int __init p1020_mbg_pc_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,P1020MBG-PC");
+}
+
+static int __init p1020_utm_pc_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,P1020UTM-PC");
+}
+
 define_machine(p2020_rdb) {
 	.name			= "P2020 RDB",
 	.probe			= p2020_rdb_probe,
@@ -138,3 +265,87 @@ define_machine(p1020_rdb) {
 	.calibrate_decr		= generic_calibrate_decr,
 	.progress		= udbg_progress,
 };
+
+define_machine(p1021_rdb_pc) {
+	.name			= "P1021 RDB-PC",
+	.probe			= p1021_rdb_pc_probe,
+	.setup_arch		= mpc85xx_rdb_setup_arch,
+	.init_IRQ		= mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
+
+define_machine(p2020_rdb_pc) {
+	.name			= "P2020RDB-PC",
+	.probe			= p2020_rdb_pc_probe,
+	.setup_arch		= mpc85xx_rdb_setup_arch,
+	.init_IRQ		= mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
+
+define_machine(p1025_rdb) {
+	.name			= "P1025 RDB",
+	.probe			= p1025_rdb_probe,
+	.setup_arch		= mpc85xx_rdb_setup_arch,
+	.init_IRQ		= mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
+
+define_machine(p1020_mbg_pc) {
+	.name			= "P1020 MBG-PC",
+	.probe			= p1020_mbg_pc_probe,
+	.setup_arch		= mpc85xx_rdb_setup_arch,
+	.init_IRQ		= mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
+
+define_machine(p1020_utm_pc) {
+	.name			= "P1020 UTM-PC",
+	.probe			= p1020_utm_pc_probe,
+	.setup_arch		= mpc85xx_rdb_setup_arch,
+	.init_IRQ		= mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
+
+define_machine(p1020_rdb_pc) {
+	.name			= "P1020RDB-PC",
+	.probe			= p1020_rdb_pc_probe,
+	.setup_arch		= mpc85xx_rdb_setup_arch,
+	.init_IRQ		= mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};

arch/powerpc/platforms/85xx/p1022_ds.c

@@ -33,6 +33,10 @@
 
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 
+#define PMUXCR_ELBCDIU_MASK	0xc0000000
+#define PMUXCR_ELBCDIU_NOR16	0x80000000
+#define PMUXCR_ELBCDIU_DIU	0x40000000
+
 /*
  * Board-specific initialization of the DIU.  This code should probably be
  * executed when the DIU is opened, rather than in arch code, but the DIU
@@ -50,11 +54,22 @@
 #define CLKDVDR_PXCLK_MASK	0x00FF0000
 
 /* Some ngPIXIS register definitions */
+#define PX_CTL		3
+#define PX_BRDCFG0	8
+#define PX_BRDCFG1	9
+
+#define PX_BRDCFG0_ELBC_SPI_MASK	0xc0
+#define PX_BRDCFG0_ELBC_SPI_ELBC	0x00
+#define PX_BRDCFG0_ELBC_SPI_NULL	0xc0
+#define PX_BRDCFG0_ELBC_DIU		0x02
+
 #define PX_BRDCFG1_DVIEN	0x80
 #define PX_BRDCFG1_DFPEN	0x40
 #define PX_BRDCFG1_BACKLIGHT	0x20
 #define PX_BRDCFG1_DDCEN	0x10
 
+#define PX_CTL_ALTACC		0x80
+
 /*
  * DIU Area Descriptor
  *
@@ -133,44 +148,117 @@ static void p1022ds_set_gamma_table(enum fsl_diu_monitor_port port,
  */
 static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
 {
-	struct device_node *np;
-	void __iomem *pixis;
-	u8 __iomem *brdcfg1;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-fpga");
-	if (!np)
-		/* older device trees used "fsl,p1022ds-pixis" */
-		np = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-pixis");
-	if (!np) {
-		pr_err("p1022ds: missing ngPIXIS node\n");
+	struct device_node *guts_node;
+	struct device_node *indirect_node = NULL;
+	struct ccsr_guts_85xx __iomem *guts;
+	u8 __iomem *lbc_lcs0_ba = NULL;
+	u8 __iomem *lbc_lcs1_ba = NULL;
+	u8 b;
+
+	/* Map the global utilities registers. */
+	guts_node = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts");
+	if (!guts_node) {
+		pr_err("p1022ds: missing global utilties device node\n");
 		return;
 	}
 
-	pixis = of_iomap(np, 0);
-	if (!pixis) {
-		pr_err("p1022ds: could not map ngPIXIS registers\n");
-		return;
+	guts = of_iomap(guts_node, 0);
+	if (!guts) {
+		pr_err("p1022ds: could not map global utilties device\n");
+		goto exit;
 	}
-	brdcfg1 = pixis + 9;	/* BRDCFG1 is at offset 9 in the ngPIXIS */
+
+	indirect_node = of_find_compatible_node(NULL, NULL,
+					     "fsl,p1022ds-indirect-pixis");
+	if (!indirect_node) {
+		pr_err("p1022ds: missing pixis indirect mode node\n");
+		goto exit;
+	}
+
+	lbc_lcs0_ba = of_iomap(indirect_node, 0);
+	if (!lbc_lcs0_ba) {
+		pr_err("p1022ds: could not map localbus chip select 0\n");
+		goto exit;
+	}
+
+	lbc_lcs1_ba = of_iomap(indirect_node, 1);
+	if (!lbc_lcs1_ba) {
+		pr_err("p1022ds: could not map localbus chip select 1\n");
+		goto exit;
+	}
+
+	/* Make sure we're in indirect mode first. */
+	if ((in_be32(&guts->pmuxcr) & PMUXCR_ELBCDIU_MASK) !=
+	    PMUXCR_ELBCDIU_DIU) {
+		struct device_node *pixis_node;
+		void __iomem *pixis;
+
+		pixis_node =
+			of_find_compatible_node(NULL, NULL, "fsl,p1022ds-fpga");
+		if (!pixis_node) {
+			pr_err("p1022ds: missing pixis node\n");
+			goto exit;
+		}
+
+		pixis = of_iomap(pixis_node, 0);
+		of_node_put(pixis_node);
+		if (!pixis) {
+			pr_err("p1022ds: could not map pixis registers\n");
+			goto exit;
+		}
+
+		/* Enable indirect PIXIS mode.  */
+		setbits8(pixis + PX_CTL, PX_CTL_ALTACC);
+		iounmap(pixis);
+
+		/* Switch the board mux to the DIU */
+		out_8(lbc_lcs0_ba, PX_BRDCFG0);	/* BRDCFG0 */
+		b = in_8(lbc_lcs1_ba);
+		b |= PX_BRDCFG0_ELBC_DIU;
+		out_8(lbc_lcs1_ba, b);
+
+		/* Set the chip mux to DIU mode. */
+		clrsetbits_be32(&guts->pmuxcr, PMUXCR_ELBCDIU_MASK,
+				PMUXCR_ELBCDIU_DIU);
+		in_be32(&guts->pmuxcr);
+	}
+
 
 	switch (port) {
 	case FSL_DIU_PORT_DVI:
-		printk(KERN_INFO "%s:%u\n", __func__, __LINE__);
 		/* Enable the DVI port, disable the DFP and the backlight */
-		clrsetbits_8(brdcfg1, PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT,
-			     PX_BRDCFG1_DVIEN);
+		out_8(lbc_lcs0_ba, PX_BRDCFG1);
+		b = in_8(lbc_lcs1_ba);
+		b &= ~(PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT);
+		b |= PX_BRDCFG1_DVIEN;
+		out_8(lbc_lcs1_ba, b);
 		break;
 	case FSL_DIU_PORT_LVDS:
-		printk(KERN_INFO "%s:%u\n", __func__, __LINE__);
+		/*
+		 * LVDS also needs backlight enabled, otherwise the display
+		 * will be blank.
+		 */
 		/* Enable the DFP port, disable the DVI and the backlight */
-		clrsetbits_8(brdcfg1, PX_BRDCFG1_DVIEN | PX_BRDCFG1_BACKLIGHT,
-			     PX_BRDCFG1_DFPEN);
+		out_8(lbc_lcs0_ba, PX_BRDCFG1);
+		b = in_8(lbc_lcs1_ba);
+		b &= ~PX_BRDCFG1_DVIEN;
+		b |= PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT;
+		out_8(lbc_lcs1_ba, b);
 		break;
 	default:
 		pr_err("p1022ds: unsupported monitor port %i\n", port);
 	}
 
-	iounmap(pixis);
+exit:
+	if (lbc_lcs1_ba)
+		iounmap(lbc_lcs1_ba);
+	if (lbc_lcs0_ba)
+		iounmap(lbc_lcs0_ba);
+	if (guts)
+		iounmap(guts);
+
+	of_node_put(indirect_node);
+	of_node_put(guts_node);
 }
 
 /**
@@ -249,6 +337,49 @@ void __init p1022_ds_pic_init(void)
 	mpic_init(mpic);
 }
 
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+
+/*
+ * Disables a node in the device tree.
+ *
+ * This function is called before kmalloc() is available, so the 'new' object
+ * should be allocated in the global area.  The easiest way is to do that is
+ * to allocate one static local variable for each call to this function.
+ */
+static void __init disable_one_node(struct device_node *np, struct property *new)
+{
+	struct property *old;
+
+	old = of_find_property(np, new->name, NULL);
+	if (old)
+		prom_update_property(np, new, old);
+	else
+		prom_add_property(np, new);
+}
+
+/* TRUE if there is a "video=fslfb" command-line parameter. */
+static bool fslfb;
+
+/*
+ * Search for a "video=fslfb" command-line parameter, and set 'fslfb' to
+ * true if we find it.
+ *
+ * We need to use early_param() instead of __setup() because the normal
+ * __setup() gets called to late.  However, early_param() gets called very
+ * early, before the device tree is unflattened, so all we can do now is set a
+ * global variable.  Later on, p1022_ds_setup_arch() will use that variable
+ * to determine if we need to update the device tree.
+ */
+static int __init early_video_setup(char *options)
+{
+	fslfb = (strncmp(options, "fslfb:", 6) == 0);
+
+	return 0;
+}
+early_param("video", early_video_setup);
+
+#endif
+
 /*
  * Setup the architecture
  */
@@ -286,6 +417,34 @@ static void __init p1022_ds_setup_arch(void)
 	diu_ops.set_monitor_port	= p1022ds_set_monitor_port;
 	diu_ops.set_pixel_clock		= p1022ds_set_pixel_clock;
 	diu_ops.valid_monitor_port	= p1022ds_valid_monitor_port;
+
+	/*
+	 * Disable the NOR flash node if there is video=fslfb... command-line
+	 * parameter.  When the DIU is active, NOR flash is unavailable, so we
+	 * have to disable the node before the MTD driver loads.
+	 */
+	if (fslfb) {
+		struct device_node *np =
+			of_find_compatible_node(NULL, NULL, "fsl,p1022-elbc");
+
+		if (np) {
+			np = of_find_compatible_node(np, NULL, "cfi-flash");
+			if (np) {
+				static struct property nor_status = {
+					.name = "status",
+					.value = "disabled",
+					.length = sizeof("disabled"),
+				};
+
+				pr_info("p1022ds: disabling %s node",
+					np->full_name);
+				disable_one_node(np, &nor_status);
+				of_node_put(np);
+			}
+		}
+
+	}
+
 #endif
 
 	mpc85xx_smp_init();

arch/powerpc/platforms/86xx/Kconfig

@@ -39,6 +39,7 @@ config GEF_PPC9A
 	select MMIO_NVRAM
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
+	select GE_FPGA
 	help
 	  This option enables support for the GE PPC9A.
 
@@ -48,6 +49,7 @@ config GEF_SBC310
 	select MMIO_NVRAM
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
+	select GE_FPGA
 	help
 	  This option enables support for the GE SBC310.
 
@@ -57,6 +59,7 @@ config GEF_SBC610
 	select MMIO_NVRAM
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
+	select GE_FPGA
 	select HAS_RAPIDIO
 	help
 	  This option enables support for the GE SBC610.

arch/powerpc/platforms/86xx/Makefile

@@ -7,7 +7,6 @@ obj-$(CONFIG_SMP)		+= mpc86xx_smp.o
 obj-$(CONFIG_MPC8641_HPCN)	+= mpc86xx_hpcn.o
 obj-$(CONFIG_SBC8641D)		+= sbc8641d.o
 obj-$(CONFIG_MPC8610_HPCD)	+= mpc8610_hpcd.o
-gef-gpio-$(CONFIG_GPIOLIB)	+= gef_gpio.o
-obj-$(CONFIG_GEF_SBC610)	+= gef_sbc610.o gef_pic.o $(gef-gpio-y)
-obj-$(CONFIG_GEF_SBC310)	+= gef_sbc310.o gef_pic.o $(gef-gpio-y)
-obj-$(CONFIG_GEF_PPC9A)		+= gef_ppc9a.o gef_pic.o $(gef-gpio-y)
+obj-$(CONFIG_GEF_SBC610)	+= gef_sbc610.o
+obj-$(CONFIG_GEF_SBC310)	+= gef_sbc310.o
+obj-$(CONFIG_GEF_PPC9A)		+= gef_ppc9a.o

arch/powerpc/platforms/86xx/gef_ppc9a.c

@@ -37,9 +37,9 @@
 
 #include <sysdev/fsl_pci.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/ge/ge_pic.h>
 
 #include "mpc86xx.h"
-#include "gef_pic.h"
 
 #undef DEBUG
 

arch/powerpc/platforms/86xx/gef_sbc310.c

@@ -37,9 +37,9 @@
 
 #include <sysdev/fsl_pci.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/ge/ge_pic.h>
 
 #include "mpc86xx.h"
-#include "gef_pic.h"
 
 #undef DEBUG
 

arch/powerpc/platforms/86xx/gef_sbc610.c

@@ -37,9 +37,9 @@
 
 #include <sysdev/fsl_pci.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/ge/ge_pic.h>
 
 #include "mpc86xx.h"
-#include "gef_pic.h"
 
 #undef DEBUG
 

arch/powerpc/platforms/Kconfig

@@ -86,6 +86,14 @@ config MPIC_WEIRD
 	bool
 	default n
 
+config MPIC_MSGR
+	bool "MPIC message register support"
+	depends on MPIC
+	default n
+	help
+	  Enables support for the MPIC message registers.  These
+	  registers are used for inter-processor communication.
+
 config PPC_I8259
 	bool
 	default n

arch/powerpc/sysdev/Kconfig

@@ -29,3 +29,7 @@ config SCOM_DEBUGFS
 	bool "Expose SCOM controllers via debugfs"
 	depends on PPC_SCOM
 	default n
+
+config GE_FPGA
+	bool
+	default n

arch/powerpc/sysdev/Makefile

@@ -4,6 +4,8 @@ ccflags-$(CONFIG_PPC64)		:= -mno-minimal-toc
 
 mpic-msi-obj-$(CONFIG_PCI_MSI)	+= mpic_msi.o mpic_u3msi.o mpic_pasemi_msi.o
 obj-$(CONFIG_MPIC)		+= mpic.o $(mpic-msi-obj-y)
+mpic-msgr-obj-$(CONFIG_MPIC_MSGR)	+= mpic_msgr.o
+obj-$(CONFIG_MPIC)		+= mpic.o $(mpic-msi-obj-y) $(mpic-msgr-obj-y)
 obj-$(CONFIG_PPC_EPAPR_HV_PIC)	+= ehv_pic.o
 fsl-msi-obj-$(CONFIG_PCI_MSI)	+= fsl_msi.o
 obj-$(CONFIG_PPC_MSI_BITMAP)	+= msi_bitmap.o
@@ -65,3 +67,5 @@ obj-$(CONFIG_PPC_SCOM)		+= scom.o
 subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
 
 obj-$(CONFIG_PPC_XICS)		+= xics/
+
+obj-$(CONFIG_GE_FPGA)		+= ge/

arch/powerpc/sysdev/fsl_85xx_cache_sram.c

@@ -24,6 +24,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/of_platform.h>

arch/powerpc/sysdev/fsl_85xx_l2ctlr.c

@@ -21,6 +21,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/of_platform.h>
 #include <asm/io.h>
 
@@ -200,6 +201,9 @@ static struct of_device_id mpc85xx_l2ctlr_of_match[] = {
 	{
 		.compatible = "fsl,p1022-l2-cache-controller",
 	},
+	{
+		.compatible = "fsl,mpc8548-l2-cache-controller",
+	},
 	{},
 };
 

arch/powerpc/sysdev/fsl_msi.c

@@ -410,6 +410,7 @@ static int __devinit fsl_of_msi_probe(struct platform_device *dev)
 
 		msi->msi_regs = ioremap(res.start, resource_size(&res));
 		if (!msi->msi_regs) {
+			err = -ENOMEM;
 			dev_err(&dev->dev, "could not map node %s\n",
 				dev->dev.of_node->full_name);
 			goto error_out;

arch/powerpc/sysdev/fsl_rio.c

@@ -66,8 +66,8 @@
 		"	li %0,%3\n"			\
 		"	b 2b\n"				\
 		".section __ex_table,\"a\"\n"		\
-		"	.align 2\n"			\
-		"	.long 1b,3b\n"			\
+			PPC_LONG_ALIGN "\n"		\
+			PPC_LONG "1b,3b\n"		\
 		".text"					\
 		: "=r" (err), "=r" (x)			\
 		: "b" (addr), "i" (-EFAULT), "0" (err))

arch/powerpc/sysdev/fsl_rmu.c

@@ -100,14 +100,8 @@
 #define DOORBELL_DSR_TE		0x00000080
 #define DOORBELL_DSR_QFI	0x00000010
 #define DOORBELL_DSR_DIQI	0x00000001
-#define DOORBELL_TID_OFFSET	0x02
-#define DOORBELL_SID_OFFSET	0x04
-#define DOORBELL_INFO_OFFSET	0x06
 
 #define DOORBELL_MESSAGE_SIZE	0x08
-#define DBELL_SID(x)		(*(u16 *)(x + DOORBELL_SID_OFFSET))
-#define DBELL_TID(x)		(*(u16 *)(x + DOORBELL_TID_OFFSET))
-#define DBELL_INF(x)		(*(u16 *)(x + DOORBELL_INFO_OFFSET))
 
 struct rio_msg_regs {
 	u32 omr;
@@ -193,6 +187,13 @@ struct fsl_rmu {
 	int rxirq;
 };
 
+struct rio_dbell_msg {
+	u16 pad1;
+	u16 tid;
+	u16 sid;
+	u16 info;
+};
+
 /**
  * fsl_rio_tx_handler - MPC85xx outbound message interrupt handler
  * @irq: Linux interrupt number
@@ -311,8 +312,8 @@ fsl_rio_dbell_handler(int irq, void *dev_instance)
 
 	/* XXX Need to check/dispatch until queue empty */
 	if (dsr & DOORBELL_DSR_DIQI) {
-		u32 dmsg =
-			(u32) fsl_dbell->dbell_ring.virt +
+		struct rio_dbell_msg *dmsg =
+			fsl_dbell->dbell_ring.virt +
 			(in_be32(&fsl_dbell->dbell_regs->dqdpar) & 0xfff);
 		struct rio_dbell *dbell;
 		int found = 0;
@@ -320,25 +321,25 @@ fsl_rio_dbell_handler(int irq, void *dev_instance)
 		pr_debug
 			("RIO: processing doorbell,"
 			" sid %2.2x tid %2.2x info %4.4x\n",
-			DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
+			dmsg->sid, dmsg->tid, dmsg->info);
 
 		for (i = 0; i < MAX_PORT_NUM; i++) {
 			if (fsl_dbell->mport[i]) {
 				list_for_each_entry(dbell,
 					&fsl_dbell->mport[i]->dbells, node) {
 					if ((dbell->res->start
-						<= DBELL_INF(dmsg))
+						<= dmsg->info)
 						&& (dbell->res->end
-						>= DBELL_INF(dmsg))) {
+						>= dmsg->info)) {
 						found = 1;
 						break;
 					}
 				}
 				if (found && dbell->dinb) {
 					dbell->dinb(fsl_dbell->mport[i],
-						dbell->dev_id, DBELL_SID(dmsg),
-						DBELL_TID(dmsg),
-						DBELL_INF(dmsg));
+						dbell->dev_id, dmsg->sid,
+						dmsg->tid,
+						dmsg->info);
 					break;
 				}
 			}
@@ -348,8 +349,8 @@ fsl_rio_dbell_handler(int irq, void *dev_instance)
 			pr_debug
 				("RIO: spurious doorbell,"
 				" sid %2.2x tid %2.2x info %4.4x\n",
-				DBELL_SID(dmsg), DBELL_TID(dmsg),
-				DBELL_INF(dmsg));
+				dmsg->sid, dmsg->tid,
+				dmsg->info);
 		}
 		setbits32(&fsl_dbell->dbell_regs->dmr, DOORBELL_DMR_DI);
 		out_be32(&fsl_dbell->dbell_regs->dsr, DOORBELL_DSR_DIQI);
@@ -657,7 +658,7 @@ fsl_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
 	int ret = 0;
 
 	pr_debug("RIO: fsl_add_outb_message(): destid %4.4x mbox %d buffer " \
-		 "%8.8x len %8.8x\n", rdev->destid, mbox, (int)buffer, len);
+		 "%p len %8.8zx\n", rdev->destid, mbox, buffer, len);
 	if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) {
 		ret = -EINVAL;
 		goto out;
@@ -972,7 +973,8 @@ out:
 void *fsl_get_inb_message(struct rio_mport *mport, int mbox)
 {
 	struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
-	u32 phys_buf, virt_buf;
+	u32 phys_buf;
+	void *virt_buf;
 	void *buf = NULL;
 	int buf_idx;
 
@@ -982,7 +984,7 @@ void *fsl_get_inb_message(struct rio_mport *mport, int mbox)
 	if (phys_buf == in_be32(&rmu->msg_regs->ifqepar))
 		goto out2;
 
-	virt_buf = (u32) rmu->msg_rx_ring.virt + (phys_buf
+	virt_buf = rmu->msg_rx_ring.virt + (phys_buf
 						- rmu->msg_rx_ring.phys);
 	buf_idx = (phys_buf - rmu->msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
 	buf = rmu->msg_rx_ring.virt_buffer[buf_idx];
@@ -994,7 +996,7 @@ void *fsl_get_inb_message(struct rio_mport *mport, int mbox)
 	}
 
 	/* Copy max message size, caller is expected to allocate that big */
-	memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE);
+	memcpy(buf, virt_buf, RIO_MAX_MSG_SIZE);
 
 	/* Clear the available buffer */
 	rmu->msg_rx_ring.virt_buffer[buf_idx] = NULL;

arch/powerpc/sysdev/ge/Makefile

@@ -0,0 +1 @@
+obj-$(CONFIG_GE_FPGA)		+= ge_pic.o

arch/powerpc/platforms/86xx/gef_pic.c → arch/powerpc/sysdev/ge/ge_pic.c

@@ -22,7 +22,7 @@
 #include <asm/prom.h>
 #include <asm/irq.h>
 
-#include "gef_pic.h"
+#include "ge_pic.h"
 
 #define DEBUG
 #undef DEBUG

arch/powerpc/sysdev/mpic_msgr.c

@@ -0,0 +1,282 @@
+/*
+ * Copyright 2011-2012, Meador Inge, Mentor Graphics Corporation.
+ *
+ * Some ideas based on un-pushed work done by Vivek Mahajan, Jason Jin, and
+ * Mingkai Hu from Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+
+#include <linux/list.h>
+#include <linux/of_platform.h>
+#include <linux/errno.h>
+#include <asm/prom.h>
+#include <asm/hw_irq.h>
+#include <asm/ppc-pci.h>
+#include <asm/mpic_msgr.h>
+
+#define MPIC_MSGR_REGISTERS_PER_BLOCK	4
+#define MPIC_MSGR_STRIDE		0x10
+#define MPIC_MSGR_MER_OFFSET		0x100
+#define MSGR_INUSE			0
+#define MSGR_FREE			1
+
+static struct mpic_msgr **mpic_msgrs;
+static unsigned int mpic_msgr_count;
+
+static inline void _mpic_msgr_mer_write(struct mpic_msgr *msgr, u32 value)
+{
+	out_be32(msgr->mer, value);
+}
+
+static inline u32 _mpic_msgr_mer_read(struct mpic_msgr *msgr)
+{
+	return in_be32(msgr->mer);
+}
+
+static inline void _mpic_msgr_disable(struct mpic_msgr *msgr)
+{
+	u32 mer = _mpic_msgr_mer_read(msgr);
+
+	_mpic_msgr_mer_write(msgr, mer & ~(1 << msgr->num));
+}
+
+struct mpic_msgr *mpic_msgr_get(unsigned int reg_num)
+{
+	unsigned long flags;
+	struct mpic_msgr *msgr;
+
+	/* Assume busy until proven otherwise.  */
+	msgr = ERR_PTR(-EBUSY);
+
+	if (reg_num >= mpic_msgr_count)
+		return ERR_PTR(-ENODEV);
+
+	raw_spin_lock_irqsave(&msgr->lock, flags);
+	if (mpic_msgrs[reg_num]->in_use == MSGR_FREE) {
+		msgr = mpic_msgrs[reg_num];
+		msgr->in_use = MSGR_INUSE;
+	}
+	raw_spin_unlock_irqrestore(&msgr->lock, flags);
+
+	return msgr;
+}
+EXPORT_SYMBOL_GPL(mpic_msgr_get);
+
+void mpic_msgr_put(struct mpic_msgr *msgr)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&msgr->lock, flags);
+	msgr->in_use = MSGR_FREE;
+	_mpic_msgr_disable(msgr);
+	raw_spin_unlock_irqrestore(&msgr->lock, flags);
+}
+EXPORT_SYMBOL_GPL(mpic_msgr_put);
+
+void mpic_msgr_enable(struct mpic_msgr *msgr)
+{
+	unsigned long flags;
+	u32 mer;
+
+	raw_spin_lock_irqsave(&msgr->lock, flags);
+	mer = _mpic_msgr_mer_read(msgr);
+	_mpic_msgr_mer_write(msgr, mer | (1 << msgr->num));
+	raw_spin_unlock_irqrestore(&msgr->lock, flags);
+}
+EXPORT_SYMBOL_GPL(mpic_msgr_enable);
+
+void mpic_msgr_disable(struct mpic_msgr *msgr)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&msgr->lock, flags);
+	_mpic_msgr_disable(msgr);
+	raw_spin_unlock_irqrestore(&msgr->lock, flags);
+}
+EXPORT_SYMBOL_GPL(mpic_msgr_disable);
+
+/* The following three functions are used to compute the order and number of
+ * the message register blocks.  They are clearly very inefficent.  However,
+ * they are called *only* a few times during device initialization.
+ */
+static unsigned int mpic_msgr_number_of_blocks(void)
+{
+	unsigned int count;
+	struct device_node *aliases;
+
+	count = 0;
+	aliases = of_find_node_by_name(NULL, "aliases");
+
+	if (aliases) {
+		char buf[32];
+
+		for (;;) {
+			snprintf(buf, sizeof(buf), "mpic-msgr-block%d", count);
+			if (!of_find_property(aliases, buf, NULL))
+				break;
+
+			count += 1;
+		}
+	}
+
+	return count;
+}
+
+static unsigned int mpic_msgr_number_of_registers(void)
+{
+	return mpic_msgr_number_of_blocks() * MPIC_MSGR_REGISTERS_PER_BLOCK;
+}
+
+static int mpic_msgr_block_number(struct device_node *node)
+{
+	struct device_node *aliases;
+	unsigned int index, number_of_blocks;
+	char buf[64];
+
+	number_of_blocks = mpic_msgr_number_of_blocks();
+	aliases = of_find_node_by_name(NULL, "aliases");
+	if (!aliases)
+		return -1;
+
+	for (index = 0; index < number_of_blocks; ++index) {
+		struct property *prop;
+
+		snprintf(buf, sizeof(buf), "mpic-msgr-block%d", index);
+		prop = of_find_property(aliases, buf, NULL);
+		if (node == of_find_node_by_path(prop->value))
+			break;
+	}
+
+	return index == number_of_blocks ? -1 : index;
+}
+
+/* The probe function for a single message register block.
+ */
+static __devinit int mpic_msgr_probe(struct platform_device *dev)
+{
+	void __iomem *msgr_block_addr;
+	int block_number;
+	struct resource rsrc;
+	unsigned int i;
+	unsigned int irq_index;
+	struct device_node *np = dev->dev.of_node;
+	unsigned int receive_mask;
+	const unsigned int *prop;
+
+	if (!np) {
+		dev_err(&dev->dev, "Device OF-Node is NULL");
+		return -EFAULT;
+	}
+
+	/* Allocate the message register array upon the first device
+	 * registered.
+	 */
+	if (!mpic_msgrs) {
+		mpic_msgr_count = mpic_msgr_number_of_registers();
+		dev_info(&dev->dev, "Found %d message registers\n",
+				mpic_msgr_count);
+
+		mpic_msgrs = kzalloc(sizeof(struct mpic_msgr) * mpic_msgr_count,
+							 GFP_KERNEL);
+		if (!mpic_msgrs) {
+			dev_err(&dev->dev,
+				"No memory for message register blocks\n");
+			return -ENOMEM;
+		}
+	}
+	dev_info(&dev->dev, "Of-device full name %s\n", np->full_name);
+
+	/* IO map the message register block. */
+	of_address_to_resource(np, 0, &rsrc);
+	msgr_block_addr = ioremap(rsrc.start, rsrc.end - rsrc.start);
+	if (!msgr_block_addr) {
+		dev_err(&dev->dev, "Failed to iomap MPIC message registers");
+		return -EFAULT;
+	}
+
+	/* Ensure the block has a defined order. */
+	block_number = mpic_msgr_block_number(np);
+	if (block_number < 0) {
+		dev_err(&dev->dev,
+			"Failed to find message register block alias\n");
+		return -ENODEV;
+	}
+	dev_info(&dev->dev, "Setting up message register block %d\n",
+			block_number);
+
+	/* Grab the receive mask which specifies what registers can receive
+	 * interrupts.
+	 */
+	prop = of_get_property(np, "mpic-msgr-receive-mask", NULL);
+	receive_mask = (prop) ? *prop : 0xF;
+
+	/* Build up the appropriate message register data structures. */
+	for (i = 0, irq_index = 0; i < MPIC_MSGR_REGISTERS_PER_BLOCK; ++i) {
+		struct mpic_msgr *msgr;
+		unsigned int reg_number;
+
+		msgr = kzalloc(sizeof(struct mpic_msgr), GFP_KERNEL);
+		if (!msgr) {
+			dev_err(&dev->dev, "No memory for message register\n");
+			return -ENOMEM;
+		}
+
+		reg_number = block_number * MPIC_MSGR_REGISTERS_PER_BLOCK + i;
+		msgr->base = msgr_block_addr + i * MPIC_MSGR_STRIDE;
+		msgr->mer = msgr->base + MPIC_MSGR_MER_OFFSET;
+		msgr->in_use = MSGR_FREE;
+		msgr->num = i;
+		raw_spin_lock_init(&msgr->lock);
+
+		if (receive_mask & (1 << i)) {
+			struct resource irq;
+
+			if (of_irq_to_resource(np, irq_index, &irq) == NO_IRQ) {
+				dev_err(&dev->dev,
+						"Missing interrupt specifier");
+				kfree(msgr);
+				return -EFAULT;
+			}
+			msgr->irq = irq.start;
+			irq_index += 1;
+		} else {
+			msgr->irq = NO_IRQ;
+		}
+
+		mpic_msgrs[reg_number] = msgr;
+		mpic_msgr_disable(msgr);
+		dev_info(&dev->dev, "Register %d initialized: irq %d\n",
+				reg_number, msgr->irq);
+
+	}
+
+	return 0;
+}
+
+static const struct of_device_id mpic_msgr_ids[] = {
+	{
+		.compatible = "fsl,mpic-v3.1-msgr",
+		.data = NULL,
+	},
+	{}
+};
+
+static struct platform_driver mpic_msgr_driver = {
+	.driver = {
+		.name = "mpic-msgr",
+		.owner = THIS_MODULE,
+		.of_match_table = mpic_msgr_ids,
+	},
+	.probe = mpic_msgr_probe,
+};
+
+static __init int mpic_msgr_init(void)
+{
+	return platform_driver_register(&mpic_msgr_driver);
+}
+subsys_initcall(mpic_msgr_init);

drivers/gpio/Kconfig

@@ -190,6 +190,17 @@ config GPIO_VX855
 	  additional drivers must be enabled in order to use the
 	  functionality of the device.
 
+config GPIO_GE_FPGA
+	bool "GE FPGA based GPIO"
+	depends on GE_FPGA
+	help
+	  Support for common GPIO functionality provided on some GE Single Board
+	  Computers.
+
+	  This driver provides basic support (configure as input or output, read
+	  and write pin state) for GPIO implemented in a number of GE single
+	  board computers.
+
 comment "I2C GPIO expanders:"
 
 config GPIO_MAX7300

drivers/gpio/Makefile

@@ -16,6 +16,7 @@ obj-$(CONFIG_GPIO_CS5535)	+= gpio-cs5535.o
 obj-$(CONFIG_GPIO_DA9052)	+= gpio-da9052.o
 obj-$(CONFIG_ARCH_DAVINCI)	+= gpio-davinci.o
 obj-$(CONFIG_GPIO_EP93XX)	+= gpio-ep93xx.o
+obj-$(CONFIG_GPIO_GE_FPGA)	+= gpio-ge.o
 obj-$(CONFIG_GPIO_IT8761E)	+= gpio-it8761e.o
 obj-$(CONFIG_GPIO_JANZ_TTL)	+= gpio-janz-ttl.o
 obj-$(CONFIG_ARCH_KS8695)	+= gpio-ks8695.o

arch/powerpc/platforms/86xx/gef_gpio.c → drivers/gpio/gpio-ge.c

@@ -14,7 +14,7 @@
  *
  * Configuration of output modes (totem-pole/open-drain)
  * Interrupt configuration - interrupts are always generated the FPGA relies on
- * 	the I/O interrupt controllers mask to stop them propergating
+ * the I/O interrupt controllers mask to stop them propergating
  */
 
 #include <linux/kernel.h>
@@ -162,6 +162,34 @@ static int __init gef_gpio_init(void)
 		}
 	}
 
+	for_each_compatible_node(np, NULL, "ge,imp3a-gpio") {
+
+		pr_debug("%s: Initialising GE GPIO\n", np->full_name);
+
+		/* Allocate chip structure */
+		gef_gpio_chip = kzalloc(sizeof(*gef_gpio_chip), GFP_KERNEL);
+		if (!gef_gpio_chip) {
+			pr_err("%s: Unable to allocate structure\n",
+				np->full_name);
+			continue;
+		}
+
+		/* Setup pointers to chip functions */
+		gef_gpio_chip->gc.of_gpio_n_cells = 2;
+		gef_gpio_chip->gc.ngpio = 16;
+		gef_gpio_chip->gc.direction_input = gef_gpio_dir_in;
+		gef_gpio_chip->gc.direction_output = gef_gpio_dir_out;
+		gef_gpio_chip->gc.get = gef_gpio_get;
+		gef_gpio_chip->gc.set = gef_gpio_set;
+
+		/* This function adds a memory mapped GPIO chip */
+		retval = of_mm_gpiochip_add(np, gef_gpio_chip);
+		if (retval) {
+			kfree(gef_gpio_chip);
+			pr_err("%s: Unable to add GPIO\n", np->full_name);
+		}
+	}
+
 	return 0;
 };
 arch_initcall(gef_gpio_init);

drivers/mtd/nand/Kconfig

@@ -462,6 +462,16 @@ config MTD_NAND_FSL_ELBC
 	  Enabling this option will enable you to use this to control
 	  external NAND devices.
 
+config MTD_NAND_FSL_IFC
+	tristate "NAND support for Freescale IFC controller"
+	depends on MTD_NAND && FSL_SOC
+	select FSL_IFC
+	help
+	  Various Freescale chips e.g P1010, include a NAND Flash machine
+	  with built-in hardware ECC capabilities.
+	  Enabling this option will enable you to use this to control
+	  external NAND devices.
+
 config MTD_NAND_FSL_UPM
 	tristate "Support for NAND on Freescale UPM"
 	depends on PPC_83xx || PPC_85xx

drivers/mtd/nand/Makefile

@@ -37,6 +37,7 @@ obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o
 obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
 obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
 obj-$(CONFIG_MTD_NAND_FSL_ELBC)		+= fsl_elbc_nand.o
+obj-$(CONFIG_MTD_NAND_FSL_IFC)		+= fsl_ifc_nand.o
 obj-$(CONFIG_MTD_NAND_FSL_UPM)		+= fsl_upm.o
 obj-$(CONFIG_MTD_NAND_SH_FLCTL)		+= sh_flctl.o
 obj-$(CONFIG_MTD_NAND_MXC)		+= mxc_nand.o

drivers/mtd/nand/fsl_ifc_nand.c

@@ -0,0 +1,1072 @@
+/*
+ * Freescale Integrated Flash Controller NAND driver
+ *
+ * Copyright 2011-2012 Freescale Semiconductor, Inc
+ *
+ * Author: Dipen Dudhat <Dipen.Dudhat@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand_ecc.h>
+#include <asm/fsl_ifc.h>
+
+#define ERR_BYTE		0xFF /* Value returned for read
+					bytes when read failed	*/
+#define IFC_TIMEOUT_MSECS	500  /* Maximum number of mSecs to wait
+					for IFC NAND Machine	*/
+
+struct fsl_ifc_ctrl;
+
+/* mtd information per set */
+struct fsl_ifc_mtd {
+	struct mtd_info mtd;
+	struct nand_chip chip;
+	struct fsl_ifc_ctrl *ctrl;
+
+	struct device *dev;
+	int bank;		/* Chip select bank number		*/
+	unsigned int bufnum_mask; /* bufnum = page & bufnum_mask */
+	u8 __iomem *vbase;      /* Chip select base virtual address	*/
+};
+
+/* overview of the fsl ifc controller */
+struct fsl_ifc_nand_ctrl {
+	struct nand_hw_control controller;
+	struct fsl_ifc_mtd *chips[FSL_IFC_BANK_COUNT];
+
+	u8 __iomem *addr;	/* Address of assigned IFC buffer	*/
+	unsigned int page;	/* Last page written to / read from	*/
+	unsigned int read_bytes;/* Number of bytes read during command	*/
+	unsigned int column;	/* Saved column from SEQIN		*/
+	unsigned int index;	/* Pointer to next byte to 'read'	*/
+	unsigned int oob;	/* Non zero if operating on OOB data	*/
+	unsigned int eccread;	/* Non zero for a full-page ECC read	*/
+	unsigned int counter;	/* counter for the initializations	*/
+};
+
+static struct fsl_ifc_nand_ctrl *ifc_nand_ctrl;
+
+/* 512-byte page with 4-bit ECC, 8-bit */
+static struct nand_ecclayout oob_512_8bit_ecc4 = {
+	.eccbytes = 8,
+	.eccpos = {8, 9, 10, 11, 12, 13, 14, 15},
+	.oobfree = { {0, 5}, {6, 2} },
+};
+
+/* 512-byte page with 4-bit ECC, 16-bit */
+static struct nand_ecclayout oob_512_16bit_ecc4 = {
+	.eccbytes = 8,
+	.eccpos = {8, 9, 10, 11, 12, 13, 14, 15},
+	.oobfree = { {2, 6}, },
+};
+
+/* 2048-byte page size with 4-bit ECC */
+static struct nand_ecclayout oob_2048_ecc4 = {
+	.eccbytes = 32,
+	.eccpos = {
+		8, 9, 10, 11, 12, 13, 14, 15,
+		16, 17, 18, 19, 20, 21, 22, 23,
+		24, 25, 26, 27, 28, 29, 30, 31,
+		32, 33, 34, 35, 36, 37, 38, 39,
+	},
+	.oobfree = { {2, 6}, {40, 24} },
+};
+
+/* 4096-byte page size with 4-bit ECC */
+static struct nand_ecclayout oob_4096_ecc4 = {
+	.eccbytes = 64,
+	.eccpos = {
+		8, 9, 10, 11, 12, 13, 14, 15,
+		16, 17, 18, 19, 20, 21, 22, 23,
+		24, 25, 26, 27, 28, 29, 30, 31,
+		32, 33, 34, 35, 36, 37, 38, 39,
+		40, 41, 42, 43, 44, 45, 46, 47,
+		48, 49, 50, 51, 52, 53, 54, 55,
+		56, 57, 58, 59, 60, 61, 62, 63,
+		64, 65, 66, 67, 68, 69, 70, 71,
+	},
+	.oobfree = { {2, 6}, {72, 56} },
+};
+
+/* 4096-byte page size with 8-bit ECC -- requires 218-byte OOB */
+static struct nand_ecclayout oob_4096_ecc8 = {
+	.eccbytes = 128,
+	.eccpos = {
+		8, 9, 10, 11, 12, 13, 14, 15,
+		16, 17, 18, 19, 20, 21, 22, 23,
+		24, 25, 26, 27, 28, 29, 30, 31,
+		32, 33, 34, 35, 36, 37, 38, 39,
+		40, 41, 42, 43, 44, 45, 46, 47,
+		48, 49, 50, 51, 52, 53, 54, 55,
+		56, 57, 58, 59, 60, 61, 62, 63,
+		64, 65, 66, 67, 68, 69, 70, 71,
+		72, 73, 74, 75, 76, 77, 78, 79,
+		80, 81, 82, 83, 84, 85, 86, 87,
+		88, 89, 90, 91, 92, 93, 94, 95,
+		96, 97, 98, 99, 100, 101, 102, 103,
+		104, 105, 106, 107, 108, 109, 110, 111,
+		112, 113, 114, 115, 116, 117, 118, 119,
+		120, 121, 122, 123, 124, 125, 126, 127,
+		128, 129, 130, 131, 132, 133, 134, 135,
+	},
+	.oobfree = { {2, 6}, {136, 82} },
+};
+
+
+/*
+ * Generic flash bbt descriptors
+ */
+static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
+static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+		   NAND_BBT_2BIT | NAND_BBT_VERSION,
+	.offs =	2, /* 0 on 8-bit small page */
+	.len = 4,
+	.veroffs = 6,
+	.maxblocks = 4,
+	.pattern = bbt_pattern,
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+		   NAND_BBT_2BIT | NAND_BBT_VERSION,
+	.offs =	2, /* 0 on 8-bit small page */
+	.len = 4,
+	.veroffs = 6,
+	.maxblocks = 4,
+	.pattern = mirror_pattern,
+};
+
+/*
+ * Set up the IFC hardware block and page address fields, and the ifc nand
+ * structure addr field to point to the correct IFC buffer in memory
+ */
+static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_ifc_mtd *priv = chip->priv;
+	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+	struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+	int buf_num;
+
+	ifc_nand_ctrl->page = page_addr;
+	/* Program ROW0/COL0 */
+	out_be32(&ifc->ifc_nand.row0, page_addr);
+	out_be32(&ifc->ifc_nand.col0, (oob ? IFC_NAND_COL_MS : 0) | column);
+
+	buf_num = page_addr & priv->bufnum_mask;
+
+	ifc_nand_ctrl->addr = priv->vbase + buf_num * (mtd->writesize * 2);
+	ifc_nand_ctrl->index = column;
+
+	/* for OOB data point to the second half of the buffer */
+	if (oob)
+		ifc_nand_ctrl->index += mtd->writesize;
+}
+
+static int is_blank(struct mtd_info *mtd, unsigned int bufnum)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_ifc_mtd *priv = chip->priv;
+	u8 __iomem *addr = priv->vbase + bufnum * (mtd->writesize * 2);
+	u32 __iomem *mainarea = (u32 *)addr;
+	u8 __iomem *oob = addr + mtd->writesize;
+	int i;
+
+	for (i = 0; i < mtd->writesize / 4; i++) {
+		if (__raw_readl(&mainarea[i]) != 0xffffffff)
+			return 0;
+	}
+
+	for (i = 0; i < chip->ecc.layout->eccbytes; i++) {
+		int pos = chip->ecc.layout->eccpos[i];
+
+		if (__raw_readb(&oob[pos]) != 0xff)
+			return 0;
+	}
+
+	return 1;
+}
+
+/* returns nonzero if entire page is blank */
+static int check_read_ecc(struct mtd_info *mtd, struct fsl_ifc_ctrl *ctrl,
+			  u32 *eccstat, unsigned int bufnum)
+{
+	u32 reg = eccstat[bufnum / 4];
+	int errors;
+
+	errors = (reg >> ((3 - bufnum % 4) * 8)) & 15;
+
+	return errors;
+}
+
+/*
+ * execute IFC NAND command and wait for it to complete
+ */
+static void fsl_ifc_run_command(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_ifc_mtd *priv = chip->priv;
+	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+	struct fsl_ifc_nand_ctrl *nctrl = ifc_nand_ctrl;
+	struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+	u32 eccstat[4];
+	int i;
+
+	/* set the chip select for NAND Transaction */
+	out_be32(&ifc->ifc_nand.nand_csel, priv->bank << IFC_NAND_CSEL_SHIFT);
+
+	dev_vdbg(priv->dev,
+			"%s: fir0=%08x fcr0=%08x\n",
+			__func__,
+			in_be32(&ifc->ifc_nand.nand_fir0),
+			in_be32(&ifc->ifc_nand.nand_fcr0));
+
+	ctrl->nand_stat = 0;
+
+	/* start read/write seq */
+	out_be32(&ifc->ifc_nand.nandseq_strt, IFC_NAND_SEQ_STRT_FIR_STRT);
+
+	/* wait for command complete flag or timeout */
+	wait_event_timeout(ctrl->nand_wait, ctrl->nand_stat,
+			   IFC_TIMEOUT_MSECS * HZ/1000);
+
+	/* ctrl->nand_stat will be updated from IRQ context */
+	if (!ctrl->nand_stat)
+		dev_err(priv->dev, "Controller is not responding\n");
+	if (ctrl->nand_stat & IFC_NAND_EVTER_STAT_FTOER)
+		dev_err(priv->dev, "NAND Flash Timeout Error\n");
+	if (ctrl->nand_stat & IFC_NAND_EVTER_STAT_WPER)
+		dev_err(priv->dev, "NAND Flash Write Protect Error\n");
+
+	if (nctrl->eccread) {
+		int errors;
+		int bufnum = nctrl->page & priv->bufnum_mask;
+		int sector = bufnum * chip->ecc.steps;
+		int sector_end = sector + chip->ecc.steps - 1;
+
+		for (i = sector / 4; i <= sector_end / 4; i++)
+			eccstat[i] = in_be32(&ifc->ifc_nand.nand_eccstat[i]);
+
+		for (i = sector; i <= sector_end; i++) {
+			errors = check_read_ecc(mtd, ctrl, eccstat, i);
+
+			if (errors == 15) {
+				/*
+				 * Uncorrectable error.
+				 * OK only if the whole page is blank.
+				 *
+				 * We disable ECCER reporting due to...
+				 * erratum IFC-A002770 -- so report it now if we
+				 * see an uncorrectable error in ECCSTAT.
+				 */
+				if (!is_blank(mtd, bufnum))
+					ctrl->nand_stat |=
+						IFC_NAND_EVTER_STAT_ECCER;
+				break;
+			}
+
+			mtd->ecc_stats.corrected += errors;
+		}
+
+		nctrl->eccread = 0;
+	}
+}
+
+static void fsl_ifc_do_read(struct nand_chip *chip,
+			    int oob,
+			    struct mtd_info *mtd)
+{
+	struct fsl_ifc_mtd *priv = chip->priv;
+	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+	struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+
+	/* Program FIR/IFC_NAND_FCR0 for Small/Large page */
+	if (mtd->writesize > 512) {
+		out_be32(&ifc->ifc_nand.nand_fir0,
+			 (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+			 (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+			 (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+			 (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) |
+			 (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP4_SHIFT));
+		out_be32(&ifc->ifc_nand.nand_fir1, 0x0);
+
+		out_be32(&ifc->ifc_nand.nand_fcr0,
+			(NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) |
+			(NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT));
+	} else {
+		out_be32(&ifc->ifc_nand.nand_fir0,
+			 (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+			 (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+			 (IFC_FIR_OP_RA0  << IFC_NAND_FIR0_OP2_SHIFT) |
+			 (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP3_SHIFT));
+		out_be32(&ifc->ifc_nand.nand_fir1, 0x0);
+
+		if (oob)
+			out_be32(&ifc->ifc_nand.nand_fcr0,
+				 NAND_CMD_READOOB << IFC_NAND_FCR0_CMD0_SHIFT);
+		else
+			out_be32(&ifc->ifc_nand.nand_fcr0,
+				NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT);
+	}
+}
+
+/* cmdfunc send commands to the IFC NAND Machine */
+static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
+			     int column, int page_addr) {
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_ifc_mtd *priv = chip->priv;
+	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+	struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+
+	/* clear the read buffer */
+	ifc_nand_ctrl->read_bytes = 0;
+	if (command != NAND_CMD_PAGEPROG)
+		ifc_nand_ctrl->index = 0;
+
+	switch (command) {
+	/* READ0 read the entire buffer to use hardware ECC. */
+	case NAND_CMD_READ0:
+		out_be32(&ifc->ifc_nand.nand_fbcr, 0);
+		set_addr(mtd, 0, page_addr, 0);
+
+		ifc_nand_ctrl->read_bytes = mtd->writesize + mtd->oobsize;
+		ifc_nand_ctrl->index += column;
+
+		if (chip->ecc.mode == NAND_ECC_HW)
+			ifc_nand_ctrl->eccread = 1;
+
+		fsl_ifc_do_read(chip, 0, mtd);
+		fsl_ifc_run_command(mtd);
+		return;
+
+	/* READOOB reads only the OOB because no ECC is performed. */
+	case NAND_CMD_READOOB:
+		out_be32(&ifc->ifc_nand.nand_fbcr, mtd->oobsize - column);
+		set_addr(mtd, column, page_addr, 1);
+
+		ifc_nand_ctrl->read_bytes = mtd->writesize + mtd->oobsize;
+
+		fsl_ifc_do_read(chip, 1, mtd);
+		fsl_ifc_run_command(mtd);
+
+		return;
+
+	/* READID must read all 8 possible bytes */
+	case NAND_CMD_READID:
+		out_be32(&ifc->ifc_nand.nand_fir0,
+				(IFC_FIR_OP_CMD0 << IFC_NAND_FIR0_OP0_SHIFT) |
+				(IFC_FIR_OP_UA  << IFC_NAND_FIR0_OP1_SHIFT) |
+				(IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT));
+		out_be32(&ifc->ifc_nand.nand_fcr0,
+				NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT);
+		/* 8 bytes for manuf, device and exts */
+		out_be32(&ifc->ifc_nand.nand_fbcr, 8);
+		ifc_nand_ctrl->read_bytes = 8;
+
+		set_addr(mtd, 0, 0, 0);
+		fsl_ifc_run_command(mtd);
+		return;
+
+	/* ERASE1 stores the block and page address */
+	case NAND_CMD_ERASE1:
+		set_addr(mtd, 0, page_addr, 0);
+		return;
+
+	/* ERASE2 uses the block and page address from ERASE1 */
+	case NAND_CMD_ERASE2:
+		out_be32(&ifc->ifc_nand.nand_fir0,
+			 (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+			 (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+			 (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP2_SHIFT));
+
+		out_be32(&ifc->ifc_nand.nand_fcr0,
+			 (NAND_CMD_ERASE1 << IFC_NAND_FCR0_CMD0_SHIFT) |
+			 (NAND_CMD_ERASE2 << IFC_NAND_FCR0_CMD1_SHIFT));
+
+		out_be32(&ifc->ifc_nand.nand_fbcr, 0);
+		ifc_nand_ctrl->read_bytes = 0;
+		fsl_ifc_run_command(mtd);
+		return;
+
+	/* SEQIN sets up the addr buffer and all registers except the length */
+	case NAND_CMD_SEQIN: {
+		u32 nand_fcr0;
+		ifc_nand_ctrl->column = column;
+		ifc_nand_ctrl->oob = 0;
+
+		if (mtd->writesize > 512) {
+			nand_fcr0 =
+				(NAND_CMD_SEQIN << IFC_NAND_FCR0_CMD0_SHIFT) |
+				(NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD1_SHIFT);
+
+			out_be32(&ifc->ifc_nand.nand_fir0,
+				 (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+				 (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+				 (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+				 (IFC_FIR_OP_WBCD  << IFC_NAND_FIR0_OP3_SHIFT) |
+				 (IFC_FIR_OP_CW1 << IFC_NAND_FIR0_OP4_SHIFT));
+		} else {
+			nand_fcr0 = ((NAND_CMD_PAGEPROG <<
+					IFC_NAND_FCR0_CMD1_SHIFT) |
+				    (NAND_CMD_SEQIN <<
+					IFC_NAND_FCR0_CMD2_SHIFT));
+
+			out_be32(&ifc->ifc_nand.nand_fir0,
+				 (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+				 (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP1_SHIFT) |
+				 (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+				 (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) |
+				 (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT));
+			out_be32(&ifc->ifc_nand.nand_fir1,
+				 (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT));
+
+			if (column >= mtd->writesize)
+				nand_fcr0 |=
+				NAND_CMD_READOOB << IFC_NAND_FCR0_CMD0_SHIFT;
+			else
+				nand_fcr0 |=
+				NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT;
+		}
+
+		if (column >= mtd->writesize) {
+			/* OOB area --> READOOB */
+			column -= mtd->writesize;
+			ifc_nand_ctrl->oob = 1;
+		}
+		out_be32(&ifc->ifc_nand.nand_fcr0, nand_fcr0);
+		set_addr(mtd, column, page_addr, ifc_nand_ctrl->oob);
+		return;
+	}
+
+	/* PAGEPROG reuses all of the setup from SEQIN and adds the length */
+	case NAND_CMD_PAGEPROG: {
+		if (ifc_nand_ctrl->oob) {
+			out_be32(&ifc->ifc_nand.nand_fbcr,
+				ifc_nand_ctrl->index - ifc_nand_ctrl->column);
+		} else {
+			out_be32(&ifc->ifc_nand.nand_fbcr, 0);
+		}
+
+		fsl_ifc_run_command(mtd);
+		return;
+	}
+
+	case NAND_CMD_STATUS:
+		out_be32(&ifc->ifc_nand.nand_fir0,
+				(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+				(IFC_FIR_OP_RB << IFC_NAND_FIR0_OP1_SHIFT));
+		out_be32(&ifc->ifc_nand.nand_fcr0,
+				NAND_CMD_STATUS << IFC_NAND_FCR0_CMD0_SHIFT);
+		out_be32(&ifc->ifc_nand.nand_fbcr, 1);
+		set_addr(mtd, 0, 0, 0);
+		ifc_nand_ctrl->read_bytes = 1;
+
+		fsl_ifc_run_command(mtd);
+
+		/*
+		 * The chip always seems to report that it is
+		 * write-protected, even when it is not.
+		 */
+		setbits8(ifc_nand_ctrl->addr, NAND_STATUS_WP);
+		return;
+
+	case NAND_CMD_RESET:
+		out_be32(&ifc->ifc_nand.nand_fir0,
+				IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT);
+		out_be32(&ifc->ifc_nand.nand_fcr0,
+				NAND_CMD_RESET << IFC_NAND_FCR0_CMD0_SHIFT);
+		fsl_ifc_run_command(mtd);
+		return;
+
+	default:
+		dev_err(priv->dev, "%s: error, unsupported command 0x%x.\n",
+					__func__, command);
+	}
+}
+
+static void fsl_ifc_select_chip(struct mtd_info *mtd, int chip)
+{
+	/* The hardware does not seem to support multiple
+	 * chips per bank.
+	 */
+}
+
+/*
+ * Write buf to the IFC NAND Controller Data Buffer
+ */
+static void fsl_ifc_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_ifc_mtd *priv = chip->priv;
+	unsigned int bufsize = mtd->writesize + mtd->oobsize;
+
+	if (len <= 0) {
+		dev_err(priv->dev, "%s: len %d bytes", __func__, len);
+		return;
+	}
+
+	if ((unsigned int)len > bufsize - ifc_nand_ctrl->index) {
+		dev_err(priv->dev,
+			"%s: beyond end of buffer (%d requested, %u available)\n",
+			__func__, len, bufsize - ifc_nand_ctrl->index);
+		len = bufsize - ifc_nand_ctrl->index;
+	}
+
+	memcpy_toio(&ifc_nand_ctrl->addr[ifc_nand_ctrl->index], buf, len);
+	ifc_nand_ctrl->index += len;
+}
+
+/*
+ * Read a byte from either the IFC hardware buffer
+ * read function for 8-bit buswidth
+ */
+static uint8_t fsl_ifc_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_ifc_mtd *priv = chip->priv;
+
+	/*
+	 * If there are still bytes in the IFC buffer, then use the
+	 * next byte.
+	 */
+	if (ifc_nand_ctrl->index < ifc_nand_ctrl->read_bytes)
+		return in_8(&ifc_nand_ctrl->addr[ifc_nand_ctrl->index++]);
+
+	dev_err(priv->dev, "%s: beyond end of buffer\n", __func__);
+	return ERR_BYTE;
+}
+
+/*
+ * Read two bytes from the IFC hardware buffer
+ * read function for 16-bit buswith
+ */
+static uint8_t fsl_ifc_read_byte16(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_ifc_mtd *priv = chip->priv;
+	uint16_t data;
+
+	/*
+	 * If there are still bytes in the IFC buffer, then use the
+	 * next byte.
+	 */
+	if (ifc_nand_ctrl->index < ifc_nand_ctrl->read_bytes) {
+		data = in_be16((uint16_t *)&ifc_nand_ctrl->
+					addr[ifc_nand_ctrl->index]);
+		ifc_nand_ctrl->index += 2;
+		return (uint8_t) data;
+	}
+
+	dev_err(priv->dev, "%s: beyond end of buffer\n", __func__);
+	return ERR_BYTE;
+}
+
+/*
+ * Read from the IFC Controller Data Buffer
+ */
+static void fsl_ifc_read_buf(struct mtd_info *mtd, u8 *buf, int len)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_ifc_mtd *priv = chip->priv;
+	int avail;
+
+	if (len < 0) {
+		dev_err(priv->dev, "%s: len %d bytes", __func__, len);
+		return;
+	}
+
+	avail = min((unsigned int)len,
+			ifc_nand_ctrl->read_bytes - ifc_nand_ctrl->index);
+	memcpy_fromio(buf, &ifc_nand_ctrl->addr[ifc_nand_ctrl->index], avail);
+	ifc_nand_ctrl->index += avail;
+
+	if (len > avail)
+		dev_err(priv->dev,
+			"%s: beyond end of buffer (%d requested, %d available)\n",
+			__func__, len, avail);
+}
+
+/*
+ * Verify buffer against the IFC Controller Data Buffer
+ */
+static int fsl_ifc_verify_buf(struct mtd_info *mtd,
+			       const u_char *buf, int len)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_ifc_mtd *priv = chip->priv;
+	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+	struct fsl_ifc_nand_ctrl *nctrl = ifc_nand_ctrl;
+	int i;
+
+	if (len < 0) {
+		dev_err(priv->dev, "%s: write_buf of %d bytes", __func__, len);
+		return -EINVAL;
+	}
+
+	if ((unsigned int)len > nctrl->read_bytes - nctrl->index) {
+		dev_err(priv->dev,
+			"%s: beyond end of buffer (%d requested, %u available)\n",
+			__func__, len, nctrl->read_bytes - nctrl->index);
+
+		nctrl->index = nctrl->read_bytes;
+		return -EINVAL;
+	}
+
+	for (i = 0; i < len; i++)
+		if (in_8(&nctrl->addr[nctrl->index + i]) != buf[i])
+			break;
+
+	nctrl->index += len;
+
+	if (i != len)
+		return -EIO;
+	if (ctrl->nand_stat != IFC_NAND_EVTER_STAT_OPC)
+		return -EIO;
+
+	return 0;
+}
+
+/*
+ * This function is called after Program and Erase Operations to
+ * check for success or failure.
+ */
+static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip)
+{
+	struct fsl_ifc_mtd *priv = chip->priv;
+	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+	struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+	u32 nand_fsr;
+
+	/* Use READ_STATUS command, but wait for the device to be ready */
+	out_be32(&ifc->ifc_nand.nand_fir0,
+		 (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+		 (IFC_FIR_OP_RDSTAT << IFC_NAND_FIR0_OP1_SHIFT));
+	out_be32(&ifc->ifc_nand.nand_fcr0, NAND_CMD_STATUS <<
+			IFC_NAND_FCR0_CMD0_SHIFT);
+	out_be32(&ifc->ifc_nand.nand_fbcr, 1);
+	set_addr(mtd, 0, 0, 0);
+	ifc_nand_ctrl->read_bytes = 1;
+
+	fsl_ifc_run_command(mtd);
+
+	nand_fsr = in_be32(&ifc->ifc_nand.nand_fsr);
+
+	/*
+	 * The chip always seems to report that it is
+	 * write-protected, even when it is not.
+	 */
+	return nand_fsr | NAND_STATUS_WP;
+}
+
+static int fsl_ifc_read_page(struct mtd_info *mtd,
+			      struct nand_chip *chip,
+			      uint8_t *buf, int page)
+{
+	struct fsl_ifc_mtd *priv = chip->priv;
+	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+
+	fsl_ifc_read_buf(mtd, buf, mtd->writesize);
+	fsl_ifc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	if (ctrl->nand_stat & IFC_NAND_EVTER_STAT_ECCER)
+		dev_err(priv->dev, "NAND Flash ECC Uncorrectable Error\n");
+
+	if (ctrl->nand_stat != IFC_NAND_EVTER_STAT_OPC)
+		mtd->ecc_stats.failed++;
+
+	return 0;
+}
+
+/* ECC will be calculated automatically, and errors will be detected in
+ * waitfunc.
+ */
+static void fsl_ifc_write_page(struct mtd_info *mtd,
+				struct nand_chip *chip,
+				const uint8_t *buf)
+{
+	fsl_ifc_write_buf(mtd, buf, mtd->writesize);
+	fsl_ifc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+}
+
+static int fsl_ifc_chip_init_tail(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_ifc_mtd *priv = chip->priv;
+
+	dev_dbg(priv->dev, "%s: nand->numchips = %d\n", __func__,
+							chip->numchips);
+	dev_dbg(priv->dev, "%s: nand->chipsize = %lld\n", __func__,
+							chip->chipsize);
+	dev_dbg(priv->dev, "%s: nand->pagemask = %8x\n", __func__,
+							chip->pagemask);
+	dev_dbg(priv->dev, "%s: nand->chip_delay = %d\n", __func__,
+							chip->chip_delay);
+	dev_dbg(priv->dev, "%s: nand->badblockpos = %d\n", __func__,
+							chip->badblockpos);
+	dev_dbg(priv->dev, "%s: nand->chip_shift = %d\n", __func__,
+							chip->chip_shift);
+	dev_dbg(priv->dev, "%s: nand->page_shift = %d\n", __func__,
+							chip->page_shift);
+	dev_dbg(priv->dev, "%s: nand->phys_erase_shift = %d\n", __func__,
+							chip->phys_erase_shift);
+	dev_dbg(priv->dev, "%s: nand->ecclayout = %p\n", __func__,
+							chip->ecclayout);
+	dev_dbg(priv->dev, "%s: nand->ecc.mode = %d\n", __func__,
+							chip->ecc.mode);
+	dev_dbg(priv->dev, "%s: nand->ecc.steps = %d\n", __func__,
+							chip->ecc.steps);
+	dev_dbg(priv->dev, "%s: nand->ecc.bytes = %d\n", __func__,
+							chip->ecc.bytes);
+	dev_dbg(priv->dev, "%s: nand->ecc.total = %d\n", __func__,
+							chip->ecc.total);
+	dev_dbg(priv->dev, "%s: nand->ecc.layout = %p\n", __func__,
+							chip->ecc.layout);
+	dev_dbg(priv->dev, "%s: mtd->flags = %08x\n", __func__, mtd->flags);
+	dev_dbg(priv->dev, "%s: mtd->size = %lld\n", __func__, mtd->size);
+	dev_dbg(priv->dev, "%s: mtd->erasesize = %d\n", __func__,
+							mtd->erasesize);
+	dev_dbg(priv->dev, "%s: mtd->writesize = %d\n", __func__,
+							mtd->writesize);
+	dev_dbg(priv->dev, "%s: mtd->oobsize = %d\n", __func__,
+							mtd->oobsize);
+
+	return 0;
+}
+
+static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
+{
+	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+	struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+	struct nand_chip *chip = &priv->chip;
+	struct nand_ecclayout *layout;
+	u32 csor;
+
+	/* Fill in fsl_ifc_mtd structure */
+	priv->mtd.priv = chip;
+	priv->mtd.owner = THIS_MODULE;
+
+	/* fill in nand_chip structure */
+	/* set up function call table */
+	if ((in_be32(&ifc->cspr_cs[priv->bank].cspr)) & CSPR_PORT_SIZE_16)
+		chip->read_byte = fsl_ifc_read_byte16;
+	else
+		chip->read_byte = fsl_ifc_read_byte;
+
+	chip->write_buf = fsl_ifc_write_buf;
+	chip->read_buf = fsl_ifc_read_buf;
+	chip->verify_buf = fsl_ifc_verify_buf;
+	chip->select_chip = fsl_ifc_select_chip;
+	chip->cmdfunc = fsl_ifc_cmdfunc;
+	chip->waitfunc = fsl_ifc_wait;
+
+	chip->bbt_td = &bbt_main_descr;
+	chip->bbt_md = &bbt_mirror_descr;
+
+	out_be32(&ifc->ifc_nand.ncfgr, 0x0);
+
+	/* set up nand options */
+	chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
+	chip->bbt_options = NAND_BBT_USE_FLASH;
+
+
+	if (in_be32(&ifc->cspr_cs[priv->bank].cspr) & CSPR_PORT_SIZE_16) {
+		chip->read_byte = fsl_ifc_read_byte16;
+		chip->options |= NAND_BUSWIDTH_16;
+	} else {
+		chip->read_byte = fsl_ifc_read_byte;
+	}
+
+	chip->controller = &ifc_nand_ctrl->controller;
+	chip->priv = priv;
+
+	chip->ecc.read_page = fsl_ifc_read_page;
+	chip->ecc.write_page = fsl_ifc_write_page;
+
+	csor = in_be32(&ifc->csor_cs[priv->bank].csor);
+
+	/* Hardware generates ECC per 512 Bytes */
+	chip->ecc.size = 512;
+	chip->ecc.bytes = 8;
+
+	switch (csor & CSOR_NAND_PGS_MASK) {
+	case CSOR_NAND_PGS_512:
+		if (chip->options & NAND_BUSWIDTH_16) {
+			layout = &oob_512_16bit_ecc4;
+		} else {
+			layout = &oob_512_8bit_ecc4;
+
+			/* Avoid conflict with bad block marker */
+			bbt_main_descr.offs = 0;
+			bbt_mirror_descr.offs = 0;
+		}
+
+		priv->bufnum_mask = 15;
+		break;
+
+	case CSOR_NAND_PGS_2K:
+		layout = &oob_2048_ecc4;
+		priv->bufnum_mask = 3;
+		break;
+
+	case CSOR_NAND_PGS_4K:
+		if ((csor & CSOR_NAND_ECC_MODE_MASK) ==
+		    CSOR_NAND_ECC_MODE_4) {
+			layout = &oob_4096_ecc4;
+		} else {
+			layout = &oob_4096_ecc8;
+			chip->ecc.bytes = 16;
+		}
+
+		priv->bufnum_mask = 1;
+		break;
+
+	default:
+		dev_err(priv->dev, "bad csor %#x: bad page size\n", csor);
+		return -ENODEV;
+	}
+
+	/* Must also set CSOR_NAND_ECC_ENC_EN if DEC_EN set */
+	if (csor & CSOR_NAND_ECC_DEC_EN) {
+		chip->ecc.mode = NAND_ECC_HW;
+		chip->ecc.layout = layout;
+	} else {
+		chip->ecc.mode = NAND_ECC_SOFT;
+	}
+
+	return 0;
+}
+
+static int fsl_ifc_chip_remove(struct fsl_ifc_mtd *priv)
+{
+	nand_release(&priv->mtd);
+
+	kfree(priv->mtd.name);
+
+	if (priv->vbase)
+		iounmap(priv->vbase);
+
+	ifc_nand_ctrl->chips[priv->bank] = NULL;
+	dev_set_drvdata(priv->dev, NULL);
+	kfree(priv);
+
+	return 0;
+}
+
+static int match_bank(struct fsl_ifc_regs __iomem *ifc, int bank,
+		      phys_addr_t addr)
+{
+	u32 cspr = in_be32(&ifc->cspr_cs[bank].cspr);
+
+	if (!(cspr & CSPR_V))
+		return 0;
+	if ((cspr & CSPR_MSEL) != CSPR_MSEL_NAND)
+		return 0;
+
+	return (cspr & CSPR_BA) == convert_ifc_address(addr);
+}
+
+static DEFINE_MUTEX(fsl_ifc_nand_mutex);
+
+static int __devinit fsl_ifc_nand_probe(struct platform_device *dev)
+{
+	struct fsl_ifc_regs __iomem *ifc;
+	struct fsl_ifc_mtd *priv;
+	struct resource res;
+	static const char *part_probe_types[]
+		= { "cmdlinepart", "RedBoot", "ofpart", NULL };
+	int ret;
+	int bank;
+	struct device_node *node = dev->dev.of_node;
+	struct mtd_part_parser_data ppdata;
+
+	ppdata.of_node = dev->dev.of_node;
+	if (!fsl_ifc_ctrl_dev || !fsl_ifc_ctrl_dev->regs)
+		return -ENODEV;
+	ifc = fsl_ifc_ctrl_dev->regs;
+
+	/* get, allocate and map the memory resource */
+	ret = of_address_to_resource(node, 0, &res);
+	if (ret) {
+		dev_err(&dev->dev, "%s: failed to get resource\n", __func__);
+		return ret;
+	}
+
+	/* find which chip select it is connected to */
+	for (bank = 0; bank < FSL_IFC_BANK_COUNT; bank++) {
+		if (match_bank(ifc, bank, res.start))
+			break;
+	}
+
+	if (bank >= FSL_IFC_BANK_COUNT) {
+		dev_err(&dev->dev, "%s: address did not match any chip selects\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	mutex_lock(&fsl_ifc_nand_mutex);
+	if (!fsl_ifc_ctrl_dev->nand) {
+		ifc_nand_ctrl = kzalloc(sizeof(*ifc_nand_ctrl), GFP_KERNEL);
+		if (!ifc_nand_ctrl) {
+			dev_err(&dev->dev, "failed to allocate memory\n");
+			mutex_unlock(&fsl_ifc_nand_mutex);
+			return -ENOMEM;
+		}
+
+		ifc_nand_ctrl->read_bytes = 0;
+		ifc_nand_ctrl->index = 0;
+		ifc_nand_ctrl->addr = NULL;
+		fsl_ifc_ctrl_dev->nand = ifc_nand_ctrl;
+
+		spin_lock_init(&ifc_nand_ctrl->controller.lock);
+		init_waitqueue_head(&ifc_nand_ctrl->controller.wq);
+	} else {
+		ifc_nand_ctrl = fsl_ifc_ctrl_dev->nand;
+	}
+	mutex_unlock(&fsl_ifc_nand_mutex);
+
+	ifc_nand_ctrl->chips[bank] = priv;
+	priv->bank = bank;
+	priv->ctrl = fsl_ifc_ctrl_dev;
+	priv->dev = &dev->dev;
+
+	priv->vbase = ioremap(res.start, resource_size(&res));
+	if (!priv->vbase) {
+		dev_err(priv->dev, "%s: failed to map chip region\n", __func__);
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	dev_set_drvdata(priv->dev, priv);
+
+	out_be32(&ifc->ifc_nand.nand_evter_en,
+			IFC_NAND_EVTER_EN_OPC_EN |
+			IFC_NAND_EVTER_EN_FTOER_EN |
+			IFC_NAND_EVTER_EN_WPER_EN);
+
+	/* enable NAND Machine Interrupts */
+	out_be32(&ifc->ifc_nand.nand_evter_intr_en,
+			IFC_NAND_EVTER_INTR_OPCIR_EN |
+			IFC_NAND_EVTER_INTR_FTOERIR_EN |
+			IFC_NAND_EVTER_INTR_WPERIR_EN);
+
+	priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", (unsigned)res.start);
+	if (!priv->mtd.name) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	ret = fsl_ifc_chip_init(priv);
+	if (ret)
+		goto err;
+
+	ret = nand_scan_ident(&priv->mtd, 1, NULL);
+	if (ret)
+		goto err;
+
+	ret = fsl_ifc_chip_init_tail(&priv->mtd);
+	if (ret)
+		goto err;
+
+	ret = nand_scan_tail(&priv->mtd);
+	if (ret)
+		goto err;
+
+	/* First look for RedBoot table or partitions on the command
+	 * line, these take precedence over device tree information */
+	mtd_device_parse_register(&priv->mtd, part_probe_types, &ppdata,
+						NULL, 0);
+
+	dev_info(priv->dev, "IFC NAND device at 0x%llx, bank %d\n",
+		 (unsigned long long)res.start, priv->bank);
+	return 0;
+
+err:
+	fsl_ifc_chip_remove(priv);
+	return ret;
+}
+
+static int fsl_ifc_nand_remove(struct platform_device *dev)
+{
+	struct fsl_ifc_mtd *priv = dev_get_drvdata(&dev->dev);
+
+	fsl_ifc_chip_remove(priv);
+
+	mutex_lock(&fsl_ifc_nand_mutex);
+	ifc_nand_ctrl->counter--;
+	if (!ifc_nand_ctrl->counter) {
+		fsl_ifc_ctrl_dev->nand = NULL;
+		kfree(ifc_nand_ctrl);
+	}
+	mutex_unlock(&fsl_ifc_nand_mutex);
+
+	return 0;
+}
+
+static const struct of_device_id fsl_ifc_nand_match[] = {
+	{
+		.compatible = "fsl,ifc-nand",
+	},
+	{}
+};
+
+static struct platform_driver fsl_ifc_nand_driver = {
+	.driver = {
+		.name	= "fsl,ifc-nand",
+		.owner = THIS_MODULE,
+		.of_match_table = fsl_ifc_nand_match,
+	},
+	.probe       = fsl_ifc_nand_probe,
+	.remove      = fsl_ifc_nand_remove,
+};
+
+static int __init fsl_ifc_nand_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&fsl_ifc_nand_driver);
+	if (ret)
+		printk(KERN_ERR "fsl-ifc: Failed to register platform"
+				"driver\n");
+
+	return ret;
+}
+
+static void __exit fsl_ifc_nand_exit(void)
+{
+	platform_driver_unregister(&fsl_ifc_nand_driver);
+}
+
+module_init(fsl_ifc_nand_init);
+module_exit(fsl_ifc_nand_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Freescale");
+MODULE_DESCRIPTION("Freescale Integrated Flash Controller MTD NAND driver");

drivers/watchdog/Kconfig

@@ -1039,7 +1039,7 @@ config LANTIQ_WDT
 
 config GEF_WDT
 	tristate "GE Watchdog Timer"
-	depends on GEF_SBC610 || GEF_SBC310 || GEF_PPC9A
+	depends on GE_FPGA
 	---help---
 	  Watchdog timer found in a number of GE single board computers.