|
|
@@ -1,193 +0,0 @@
|
|
|
-/*
|
|
|
- * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
|
|
|
- *
|
|
|
- * May be copied or modified under the terms of the GNU General Public License
|
|
|
- *
|
|
|
- *
|
|
|
- * 00:12.0 Unknown mass storage controller:
|
|
|
- * Triones Technologies, Inc.
|
|
|
- * Unknown device 0003 (rev 01)
|
|
|
- *
|
|
|
- * hde: UDMA 2 (0x0000 0x0002) (0x0000 0x0010)
|
|
|
- * hdf: UDMA 2 (0x0002 0x0012) (0x0010 0x0030)
|
|
|
- * hde: DMA 2 (0x0000 0x0002) (0x0000 0x0010)
|
|
|
- * hdf: DMA 2 (0x0002 0x0012) (0x0010 0x0030)
|
|
|
- * hdg: DMA 1 (0x0012 0x0052) (0x0030 0x0070)
|
|
|
- * hdh: DMA 1 (0x0052 0x0252) (0x0070 0x00f0)
|
|
|
- *
|
|
|
- * ide-pci.c reference
|
|
|
- *
|
|
|
- * Since there are two cards that report almost identically,
|
|
|
- * the only discernable difference is the values reported in pcicmd.
|
|
|
- * Booting-BIOS card or HPT363 :: pcicmd == 0x07
|
|
|
- * Non-bootable card or HPT343 :: pcicmd == 0x05
|
|
|
- */
|
|
|
-
|
|
|
-#include <linux/module.h>
|
|
|
-#include <linux/types.h>
|
|
|
-#include <linux/kernel.h>
|
|
|
-#include <linux/ioport.h>
|
|
|
-#include <linux/interrupt.h>
|
|
|
-#include <linux/pci.h>
|
|
|
-#include <linux/init.h>
|
|
|
-#include <linux/ide.h>
|
|
|
-
|
|
|
-#define DRV_NAME "hpt34x"
|
|
|
-
|
|
|
-#define HPT343_DEBUG_DRIVE_INFO 0
|
|
|
-
|
|
|
-static void hpt34x_set_mode(ide_drive_t *drive, const u8 speed)
|
|
|
-{
|
|
|
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
|
|
|
- u32 reg1= 0, tmp1 = 0, reg2 = 0, tmp2 = 0;
|
|
|
- u8 hi_speed, lo_speed;
|
|
|
-
|
|
|
- hi_speed = speed >> 4;
|
|
|
- lo_speed = speed & 0x0f;
|
|
|
-
|
|
|
- if (hi_speed & 7) {
|
|
|
- hi_speed = (hi_speed & 4) ? 0x01 : 0x10;
|
|
|
- } else {
|
|
|
- lo_speed <<= 5;
|
|
|
- lo_speed >>= 5;
|
|
|
- }
|
|
|
-
|
|
|
- pci_read_config_dword(dev, 0x44, ®1);
|
|
|
- pci_read_config_dword(dev, 0x48, ®2);
|
|
|
- tmp1 = ((lo_speed << (3*drive->dn)) | (reg1 & ~(7 << (3*drive->dn))));
|
|
|
- tmp2 = ((hi_speed << drive->dn) | (reg2 & ~(0x11 << drive->dn)));
|
|
|
- pci_write_config_dword(dev, 0x44, tmp1);
|
|
|
- pci_write_config_dword(dev, 0x48, tmp2);
|
|
|
-
|
|
|
-#if HPT343_DEBUG_DRIVE_INFO
|
|
|
- printk("%s: %s drive%d (0x%04x 0x%04x) (0x%04x 0x%04x)" \
|
|
|
- " (0x%02x 0x%02x)\n",
|
|
|
- drive->name, ide_xfer_verbose(speed),
|
|
|
- drive->dn, reg1, tmp1, reg2, tmp2,
|
|
|
- hi_speed, lo_speed);
|
|
|
-#endif /* HPT343_DEBUG_DRIVE_INFO */
|
|
|
-}
|
|
|
-
|
|
|
-static void hpt34x_set_pio_mode(ide_drive_t *drive, const u8 pio)
|
|
|
-{
|
|
|
- hpt34x_set_mode(drive, XFER_PIO_0 + pio);
|
|
|
-}
|
|
|
-
|
|
|
-/*
|
|
|
- * If the BIOS does not set the IO base addaress to XX00, 343 will fail.
|
|
|
- */
|
|
|
-#define HPT34X_PCI_INIT_REG 0x80
|
|
|
-
|
|
|
-static unsigned int init_chipset_hpt34x(struct pci_dev *dev)
|
|
|
-{
|
|
|
- int i = 0;
|
|
|
- unsigned long hpt34xIoBase = pci_resource_start(dev, 4);
|
|
|
- unsigned long hpt_addr[4] = { 0x20, 0x34, 0x28, 0x3c };
|
|
|
- unsigned long hpt_addr_len[4] = { 7, 3, 7, 3 };
|
|
|
- u16 cmd;
|
|
|
- unsigned long flags;
|
|
|
-
|
|
|
- local_irq_save(flags);
|
|
|
-
|
|
|
- pci_write_config_byte(dev, HPT34X_PCI_INIT_REG, 0x00);
|
|
|
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
|
-
|
|
|
- if (cmd & PCI_COMMAND_MEMORY)
|
|
|
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xF0);
|
|
|
- else
|
|
|
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
|
|
|
-
|
|
|
- /*
|
|
|
- * Since 20-23 can be assigned and are R/W, we correct them.
|
|
|
- */
|
|
|
- pci_write_config_word(dev, PCI_COMMAND, cmd & ~PCI_COMMAND_IO);
|
|
|
- for(i=0; i<4; i++) {
|
|
|
- dev->resource[i].start = (hpt34xIoBase + hpt_addr[i]);
|
|
|
- dev->resource[i].end = dev->resource[i].start + hpt_addr_len[i];
|
|
|
- dev->resource[i].flags = IORESOURCE_IO;
|
|
|
- pci_write_config_dword(dev,
|
|
|
- (PCI_BASE_ADDRESS_0 + (i * 4)),
|
|
|
- dev->resource[i].start);
|
|
|
- }
|
|
|
- pci_write_config_word(dev, PCI_COMMAND, cmd);
|
|
|
-
|
|
|
- local_irq_restore(flags);
|
|
|
-
|
|
|
- return dev->irq;
|
|
|
-}
|
|
|
-
|
|
|
-static const struct ide_port_ops hpt34x_port_ops = {
|
|
|
- .set_pio_mode = hpt34x_set_pio_mode,
|
|
|
- .set_dma_mode = hpt34x_set_mode,
|
|
|
-};
|
|
|
-
|
|
|
-#define IDE_HFLAGS_HPT34X \
|
|
|
- (IDE_HFLAG_NO_ATAPI_DMA | \
|
|
|
- IDE_HFLAG_NO_DSC | \
|
|
|
- IDE_HFLAG_NO_AUTODMA)
|
|
|
-
|
|
|
-static const struct ide_port_info hpt34x_chipsets[] __devinitdata = {
|
|
|
- { /* 0: HPT343 */
|
|
|
- .name = DRV_NAME,
|
|
|
- .init_chipset = init_chipset_hpt34x,
|
|
|
- .port_ops = &hpt34x_port_ops,
|
|
|
- .host_flags = IDE_HFLAGS_HPT34X | IDE_HFLAG_NON_BOOTABLE,
|
|
|
- .pio_mask = ATA_PIO5,
|
|
|
- },
|
|
|
- { /* 1: HPT345 */
|
|
|
- .name = DRV_NAME,
|
|
|
- .init_chipset = init_chipset_hpt34x,
|
|
|
- .port_ops = &hpt34x_port_ops,
|
|
|
- .host_flags = IDE_HFLAGS_HPT34X | IDE_HFLAG_OFF_BOARD,
|
|
|
- .pio_mask = ATA_PIO5,
|
|
|
-#ifdef CONFIG_HPT34X_AUTODMA
|
|
|
- .swdma_mask = ATA_SWDMA2,
|
|
|
- .mwdma_mask = ATA_MWDMA2,
|
|
|
- .udma_mask = ATA_UDMA2,
|
|
|
-#endif
|
|
|
- }
|
|
|
-};
|
|
|
-
|
|
|
-static int __devinit hpt34x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
|
-{
|
|
|
- const struct ide_port_info *d;
|
|
|
- u16 pcicmd = 0;
|
|
|
-
|
|
|
- pci_read_config_word(dev, PCI_COMMAND, &pcicmd);
|
|
|
-
|
|
|
- d = &hpt34x_chipsets[(pcicmd & PCI_COMMAND_MEMORY) ? 1 : 0];
|
|
|
-
|
|
|
- return ide_pci_init_one(dev, d, NULL);
|
|
|
-}
|
|
|
-
|
|
|
-static const struct pci_device_id hpt34x_pci_tbl[] = {
|
|
|
- { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT343), 0 },
|
|
|
- { 0, },
|
|
|
-};
|
|
|
-MODULE_DEVICE_TABLE(pci, hpt34x_pci_tbl);
|
|
|
-
|
|
|
-static struct pci_driver hpt34x_pci_driver = {
|
|
|
- .name = "HPT34x_IDE",
|
|
|
- .id_table = hpt34x_pci_tbl,
|
|
|
- .probe = hpt34x_init_one,
|
|
|
- .remove = ide_pci_remove,
|
|
|
- .suspend = ide_pci_suspend,
|
|
|
- .resume = ide_pci_resume,
|
|
|
-};
|
|
|
-
|
|
|
-static int __init hpt34x_ide_init(void)
|
|
|
-{
|
|
|
- return ide_pci_register_driver(&hpt34x_pci_driver);
|
|
|
-}
|
|
|
-
|
|
|
-static void __exit hpt34x_ide_exit(void)
|
|
|
-{
|
|
|
- pci_unregister_driver(&hpt34x_pci_driver);
|
|
|
-}
|
|
|
-
|
|
|
-module_init(hpt34x_ide_init);
|
|
|
-module_exit(hpt34x_ide_exit);
|
|
|
-
|
|
|
-MODULE_AUTHOR("Andre Hedrick");
|
|
|
-MODULE_DESCRIPTION("PCI driver module for Highpoint 34x IDE");
|
|
|
-MODULE_LICENSE("GPL");
|
Bartlomiej Zolnierkiewicz