Merge branch 'master' into upstream-fixes

Documentation/fb/imacfb.txt

@@ -0,0 +1,31 @@
+
+What is imacfb?
+===============
+
+This is a generic EFI platform driver for Intel based Apple computers.
+Imacfb is only for EFI booted Intel Macs.
+
+Supported Hardware
+==================
+
+iMac 17"/20"
+Macbook
+Macbook Pro 15"/17"
+MacMini
+
+How to use it?
+==============
+
+Imacfb does not have any kind of autodetection of your machine.
+You have to add the fillowing kernel parameters in your elilo.conf:
+	Macbook :
+		video=imacfb:macbook
+	MacMini :
+		video=imacfb:mini
+	Macbook Pro 15", iMac 17" :
+		video=imacfb:i17
+	Macbook Pro 17", iMac 20" :
+		video=imacfb:i20
+
+--
+Edgar Hucek <gimli@dark-green.com>

Documentation/kobject.txt

@@ -247,7 +247,7 @@ the object-specific fields, which include:
 - default_attrs: Default attributes to be exported via sysfs when the
   object is registered.Note that the last attribute has to be
   initialized to NULL ! You can find a complete implementation
-  in drivers/block/genhd.c
+  in block/genhd.c
 
 
 Instances of struct kobj_type are not registered; only referenced by

Documentation/networking/ip-sysctl.txt

@@ -294,15 +294,15 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max
 	Default: 87380*2 bytes.
 
 tcp_mem - vector of 3 INTEGERs: min, pressure, max
-	low: below this number of pages TCP is not bothered about its
+	min: below this number of pages TCP is not bothered about its
 	memory appetite.
 
 	pressure: when amount of memory allocated by TCP exceeds this number
 	of pages, TCP moderates its memory consumption and enters memory
 	pressure mode, which is exited when memory consumption falls
-	under "low".
+	under "min".
 
-	high: number of pages allowed for queueing by all TCP sockets.
+	max: number of pages allowed for queueing by all TCP sockets.
 
 	Defaults are calculated at boot time from amount of available
 	memory.

Documentation/powerpc/booting-without-of.txt

@@ -1196,7 +1196,7 @@ platforms are moved over to use the flattened-device-tree model.
     - model : Model of the device.  Can be "TSEC", "eTSEC", or "FEC"
     - compatible : Should be "gianfar"
     - reg : Offset and length of the register set for the device
-    - address : List of bytes representing the ethernet address of
+    - mac-address : List of bytes representing the ethernet address of
       this controller
     - interrupts : <a b> where a is the interrupt number and b is a
       field that represents an encoding of the sense and level
@@ -1216,7 +1216,7 @@ platforms are moved over to use the flattened-device-tree model.
 		model = "TSEC";
 		compatible = "gianfar";
 		reg = <24000 1000>;
-		address = [ 00 E0 0C 00 73 00 ];
+		mac-address = [ 00 E0 0C 00 73 00 ];
 		interrupts = <d 3 e 3 12 3>;
 		interrupt-parent = <40000>;
 		phy-handle = <2452000>
@@ -1498,7 +1498,7 @@ not necessary as they are usually the same as the root node.
 			model = "TSEC";
 			compatible = "gianfar";
 			reg = <24000 1000>;
-			address = [ 00 E0 0C 00 73 00 ];
+			mac-address = [ 00 E0 0C 00 73 00 ];
 			interrupts = <d 3 e 3 12 3>;
 			interrupt-parent = <40000>;
 			phy-handle = <2452000>;
@@ -1511,7 +1511,7 @@ not necessary as they are usually the same as the root node.
 			model = "TSEC";
 			compatible = "gianfar";
 			reg = <25000 1000>;
-			address = [ 00 E0 0C 00 73 01 ];
+			mac-address = [ 00 E0 0C 00 73 01 ];
 			interrupts = <13 3 14 3 18 3>;
 			interrupt-parent = <40000>;
 			phy-handle = <2452001>;
@@ -1524,7 +1524,7 @@ not necessary as they are usually the same as the root node.
 			model = "FEC";
 			compatible = "gianfar";
 			reg = <26000 1000>;
-			address = [ 00 E0 0C 00 73 02 ];
+			mac-address = [ 00 E0 0C 00 73 02 ];
 			interrupts = <19 3>;
 			interrupt-parent = <40000>;
 			phy-handle = <2452002>;

MAINTAINERS

@@ -2656,6 +2656,14 @@ M:	chrisw@sous-sol.org
 L:	stable@kernel.org
 S:	Maintained
 
+STABLE BRANCH:
+P:	Greg Kroah-Hartman
+M:	greg@kroah.com
+P:	Chris Wright
+M:	chrisw@sous-sol.org
+L:	stable@kernel.org
+S:	Maintained
+
 TPM DEVICE DRIVER
 P:	Kylene Hall
 M:	kjhall@us.ibm.com

Makefile

@@ -309,9 +309,6 @@ CPPFLAGS        := -D__KERNEL__ $(LINUXINCLUDE)
 
 CFLAGS          := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
                    -fno-strict-aliasing -fno-common
-# Force gcc to behave correct even for buggy distributions
-CFLAGS          += $(call cc-option, -fno-stack-protector)
-
 AFLAGS          := -D__ASSEMBLY__
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
@@ -436,12 +433,13 @@ core-y		:= usr/
 endif # KBUILD_EXTMOD
 
 ifeq ($(dot-config),1)
-# In this section, we need .config
+# Read in config
+-include include/config/auto.conf
 
+ifeq ($(KBUILD_EXTMOD),)
 # Read in dependencies to all Kconfig* files, make sure to run
 # oldconfig if changes are detected.
 -include include/config/auto.conf.cmd
--include include/config/auto.conf
 
 # To avoid any implicit rule to kick in, define an empty command
 $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
@@ -451,16 +449,27 @@ $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
 # if auto.conf.cmd is missing then we are probably in a cleaned tree so
 # we execute the config step to be sure to catch updated Kconfig files
 include/config/auto.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
-ifeq ($(KBUILD_EXTMOD),)
 	$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
 else
-	$(error kernel configuration not valid - run 'make prepare' in $(srctree) to update it)
-endif
+# external modules needs include/linux/autoconf.h and include/config/auto.conf
+# but do not care if they are up-to-date. Use auto.conf to trigger the test
+PHONY += include/config/auto.conf
+
+include/config/auto.conf:
+	$(Q)test -e include/linux/autoconf.h -a -e $@ || (		\
+	echo;								\
+	echo "  ERROR: Kernel configuration is invalid.";		\
+	echo "         include/linux/autoconf.h or $@ are missing.";	\
+	echo "         Run 'make oldconfig && make prepare' on kernel src to fix it.";	\
+	echo;								\
+	/bin/false)
+
+endif # KBUILD_EXTMOD
 
 else
 # Dummy target needed, because used as prerequisite
 include/config/auto.conf: ;
-endif
+endif # $(dot-config)
 
 # The all: target is the default when no target is given on the
 # command line.
@@ -474,6 +483,8 @@ else
 CFLAGS		+= -O2
 endif
 
+include $(srctree)/arch/$(ARCH)/Makefile
+
 ifdef CONFIG_FRAME_POINTER
 CFLAGS		+= -fno-omit-frame-pointer $(call cc-option,-fno-optimize-sibling-calls,)
 else
@@ -488,7 +499,8 @@ ifdef CONFIG_DEBUG_INFO
 CFLAGS		+= -g
 endif
 
-include $(srctree)/arch/$(ARCH)/Makefile
+# Force gcc to behave correct even for buggy distributions
+CFLAGS          += $(call cc-option, -fno-stack-protector)
 
 # arch Makefile may override CC so keep this after arch Makefile is included
 NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)

arch/arm/common/rtctime.c

@@ -68,6 +68,7 @@ void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc
 		rtc_time_to_tm(next_time, next);
 	}
 }
+EXPORT_SYMBOL(rtc_next_alarm_time);
 
 static inline int rtc_arm_read_time(struct rtc_ops *ops, struct rtc_time *tm)
 {

arch/arm/kernel/traps.c

@@ -233,7 +233,7 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
 	spin_unlock_irq(&die_lock);
 
 	if (panic_on_oops)
-		panic("Fatal exception: panic_on_oops");
+		panic("Fatal exception");
 
 	do_exit(SIGSEGV);
 }

arch/arm/mach-ixp4xx/common-pci.c

@@ -532,8 +532,6 @@ pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
 	return -EIO;
 }
 
-EXPORT_SYMBOL(pci_set_dma_mask);
-EXPORT_SYMBOL(pci_set_consistent_dma_mask);
 EXPORT_SYMBOL(ixp4xx_pci_read);
 EXPORT_SYMBOL(ixp4xx_pci_write);
 

arch/arm/mach-ixp4xx/gtwx5715-setup.c

@@ -107,9 +107,9 @@ static struct flash_platform_data gtwx5715_flash_data = {
 	.width		= 2,
 };
 
-static struct gtw5715_flash_resource = {
+static struct resource gtwx5715_flash_resource = {
 	.flags		= IORESOURCE_MEM,
-}
+};
 
 static struct platform_device gtwx5715_flash = {
 	.name		= "IXP4XX-Flash",
@@ -130,9 +130,6 @@ static void __init gtwx5715_init(void)
 {
 	ixp4xx_sys_init();
 
-	if (!flash_resource)
-		printk(KERN_ERR "Could not allocate flash resource\n");
-
 	gtwx5715_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 	gtwx5715_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
 

arch/i386/kernel/traps.c

@@ -454,7 +454,7 @@ void die(const char * str, struct pt_regs * regs, long err)
 		panic("Fatal exception in interrupt");
 
 	if (panic_on_oops)
-		panic("Fatal exception: panic_on_oops");
+		panic("Fatal exception");
 
 	oops_exit();
 	do_exit(SIGSEGV);

arch/ia64/kernel/traps.c

@@ -118,7 +118,7 @@ die (const char *str, struct pt_regs *regs, long err)
 	spin_unlock_irq(&die.lock);
 
 	if (panic_on_oops)
-		panic("Fatal exception: panic_on_oops");
+		panic("Fatal exception");
 
   	do_exit(SIGSEGV);
 }

arch/powerpc/Kconfig

@@ -836,9 +836,10 @@ config MCA
 	bool
 
 config PCI
-	bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) \
-				  || MPC7448HPC2
-	default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !PPC_85xx && !PPC_86xx
+	bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \
+		|| PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) || MPC7448HPC2
+	default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx \
+		&& !PPC_85xx && !PPC_86xx
 	default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
 	default PCI_QSPAN if !4xx && !CPM2 && 8xx
 	help

arch/powerpc/boot/dts/mpc8641_hpcn.dts

@@ -0,0 +1,339 @@
+/*
+ * MPC8641 HPCN Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+	model = "MPC8641HPCN";
+	compatible = "mpc86xx";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#cpus = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8641@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;	// 33 MHz, from uboot
+			bus-frequency = <0>;		// From uboot
+			clock-frequency = <0>;		// From uboot
+			32-bit;
+			linux,boot-cpu;
+		};
+		PowerPC,8641@1 {
+			device_type = "cpu";
+			reg = <1>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;	// 33 MHz, from uboot
+			bus-frequency = <0>;		// From uboot
+			clock-frequency = <0>;		// From uboot
+			32-bit;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 40000000>;	// 1G at 0x0
+	};
+
+	soc8641@f8000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 f8000000 00100000>;
+		reg = <f8000000 00100000>;	// CCSRBAR 1M
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <2b 2>;
+			interrupt-parent = <40000>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3100 100>;
+			interrupts = <2b 2>;
+			interrupt-parent = <40000>;
+			dfsrr;
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			linux,phandle = <24520>;
+			ethernet-phy@0 {
+				linux,phandle = <2452000>;
+				interrupt-parent = <40000>;
+				interrupts = <4a 1>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <40000>;
+				interrupts = <4a 1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@2 {
+				linux,phandle = <2452002>;
+				interrupt-parent = <40000>;
+				interrupts = <4a 1>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@3 {
+				linux,phandle = <2452003>;
+				interrupt-parent = <40000>;
+				interrupts = <4a 1>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			mac-address = [ 00 E0 0C 00 73 00 ];
+			interrupts = <1d 2 1e 2 22 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452000>;
+		};
+
+		ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			mac-address = [ 00 E0 0C 00 73 01 ];
+			interrupts = <23 2 24 2 28 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452001>;
+		};
+		
+		ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <26000 1000>;
+			mac-address = [ 00 E0 0C 00 02 FD ];
+			interrupts = <1F 2 20 2 21 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452002>;
+		};
+
+		ethernet@27000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <27000 1000>;
+			mac-address = [ 00 E0 0C 00 03 FD ];
+			interrupts = <25 2 26 2 27 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452003>;
+		};
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>;
+			clock-frequency = <0>;
+			interrupts = <2a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;
+			clock-frequency = <0>;
+			interrupts = <1c 2>;
+			interrupt-parent = <40000>;
+		};
+
+		pci@8000 {
+			compatible = "86xx";
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8000 1000>;
+			bus-range = <0 fe>;
+			ranges = <02000000 0 80000000 80000000 0 20000000
+				  01000000 0 00000000 e2000000 0 00100000>;
+			clock-frequency = <1fca055>;
+			interrupt-parent = <40000>;
+			interrupts = <18 2>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x11 */
+				8800 0 0 1 4d0 3 2
+				8800 0 0 2 4d0 4 2
+				8800 0 0 3 4d0 5 2
+				8800 0 0 4 4d0 6 2
+
+				/* IDSEL 0x12 */
+				9000 0 0 1 4d0 4 2
+				9000 0 0 2 4d0 5 2
+				9000 0 0 3 4d0 6 2
+				9000 0 0 4 4d0 3 2
+
+				/* IDSEL 0x13 */
+				9800 0 0 1 4d0 0 0
+				9800 0 0 2 4d0 0 0
+				9800 0 0 3 4d0 0 0
+				9800 0 0 4 4d0 0 0
+
+				/* IDSEL 0x14 */
+				a000 0 0 1 4d0 0 0
+				a000 0 0 2 4d0 0 0
+				a000 0 0 3 4d0 0 0
+				a000 0 0 4 4d0 0 0
+
+				/* IDSEL 0x15 */
+				a800 0 0 1 4d0 0 0
+				a800 0 0 2 4d0 0 0
+				a800 0 0 3 4d0 0 0
+				a800 0 0 4 4d0 0 0
+
+				/* IDSEL 0x16 */
+				b000 0 0 1 4d0 0 0
+				b000 0 0 2 4d0 0 0
+				b000 0 0 3 4d0 0 0
+				b000 0 0 4 4d0 0 0
+
+				/* IDSEL 0x17 */
+				b800 0 0 1 4d0 0 0
+				b800 0 0 2 4d0 0 0
+				b800 0 0 3 4d0 0 0
+				b800 0 0 4 4d0 0 0
+
+				/* IDSEL 0x18 */
+				c000 0 0 1 4d0 0 0
+				c000 0 0 2 4d0 0 0
+				c000 0 0 3 4d0 0 0
+				c000 0 0 4 4d0 0 0
+
+				/* IDSEL 0x19 */
+				c800 0 0 1 4d0 0 0
+				c800 0 0 2 4d0 0 0
+				c800 0 0 3 4d0 0 0
+				c800 0 0 4 4d0 0 0
+
+				/* IDSEL 0x1a */
+				d000 0 0 1 4d0 6 2
+				d000 0 0 2 4d0 3 2
+				d000 0 0 3 4d0 4 2
+				d000 0 0 4 4d0 5 2
+
+
+				/* IDSEL 0x1b */
+				d800 0 0 1 4d0 5 2
+				d800 0 0 2 4d0 0 0
+				d800 0 0 3 4d0 0 0
+				d800 0 0 4 4d0 0 0
+
+				/* IDSEL 0x1c */
+				e000 0 0 1 4d0 9 2
+				e000 0 0 2 4d0 a 2
+				e000 0 0 3 4d0 c 2
+				e000 0 0 4 4d0 7 2
+
+				/* IDSEL 0x1d */
+				e800 0 0 1 4d0 9 2
+				e800 0 0 2 4d0 a 2
+				e800 0 0 3 4d0 b 2
+				e800 0 0 4 4d0 0 0
+
+				/* IDSEL 0x1e */
+				f000 0 0 1 4d0 c 2
+				f000 0 0 2 4d0 0 0
+				f000 0 0 3 4d0 0 0
+				f000 0 0 4 4d0 0 0
+
+				/* IDSEL 0x1f */
+				f800 0 0 1 4d0 6 2
+				f800 0 0 2 4d0 0 0
+				f800 0 0 3 4d0 0 0
+				f800 0 0 4 4d0 0 0
+				>;
+			i8259@4d0 {
+				linux,phandle = <4d0>;
+				clock-frequency = <0>;
+				interrupt-controller;
+				device_type = "interrupt-controller";
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				built-in;
+				compatible = "chrp,iic";
+                	        big-endian;
+				interrupts = <49 2>;
+				interrupt-parent = <40000>;
+			};
+
+		};
+		pic@40000 {
+			linux,phandle = <40000>;
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <40000 40000>;
+			built-in;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+                        big-endian;
+			interrupts = <
+				10 2 11 2 12 2 13 2
+				14 2 15 2 16 2 17 2
+				18 2 19 2 1a 2 1b 2
+				1c 2 1d 2 1e 2 1f 2
+				20 2 21 2 22 2 23 2
+				24 2 25 2 26 2 27 2
+				28 2 29 2 2a 2 2b 2
+				2c 2 2d 2 2e 2 2f 2
+				30 2 31 2 32 2 33 2
+				34 2 35 2 36 2 37 2
+				38 2 39 2 2a 2 3b 2
+				3c 2 3d 2 3e 2 3f 2
+				48 1 49 2 4a 1
+				>;
+			interrupt-parent = <40000>;
+		};
+	};
+};

arch/powerpc/configs/g5_defconfig

@@ -1,16 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc1
-# Wed Apr 19 13:24:37 2006
+# Linux kernel version: 2.6.18-rc3
+# Tue Aug  8 09:12:29 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
@@ -33,6 +35,7 @@ CONFIG_PPC_STD_MMU=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=4
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -50,6 +53,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
@@ -67,10 +71,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -116,12 +122,16 @@ CONFIG_PPC_PMAC=y
 CONFIG_PPC_PMAC64=y
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_U3_DART=y
 CONFIG_MPIC=y
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_MPIC_BROKEN_U3=y
 # CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_970_NAP=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
@@ -153,6 +163,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
 # CONFIG_HOTPLUG_CPU is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
@@ -168,6 +179,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
 # CONFIG_PPC_64K_PAGES is not set
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
@@ -184,6 +196,7 @@ CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -227,6 +240,8 @@ CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -239,6 +254,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -263,6 +279,7 @@ CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 # CONFIG_IP_NF_PPTP is not set
 # CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
 CONFIG_IP_NF_QUEUE=m
 
 #
@@ -318,6 +335,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -355,6 +373,7 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -417,7 +436,6 @@ CONFIG_IDEDMA_PCI_AUTO=y
 CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
-# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_IVB is not set
@@ -478,6 +496,7 @@ CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_SATA_MV is not set
 # CONFIG_SCSI_SATA_NV is not set
 # CONFIG_SCSI_PDC_ADMA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_SATA_QSTOR is not set
 # CONFIG_SCSI_SATA_PROMISE is not set
 # CONFIG_SCSI_SATA_SX4 is not set
@@ -497,7 +516,6 @@ CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
@@ -514,9 +532,7 @@ CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-CONFIG_MD_RAID6=m
+# CONFIG_MD_RAID456 is not set
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
@@ -559,7 +575,6 @@ CONFIG_IEEE1394_OHCI1394=y
 #
 CONFIG_IEEE1394_VIDEO1394=m
 CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
 CONFIG_IEEE1394_ETH1394=m
 CONFIG_IEEE1394_DV1394=m
 CONFIG_IEEE1394_RAWIO=y
@@ -573,6 +588,7 @@ CONFIG_IEEE1394_RAWIO=y
 # Macintosh device drivers
 #
 CONFIG_ADB_PMU=y
+# CONFIG_ADB_PMU_LED is not set
 CONFIG_PMAC_SMU=y
 CONFIG_THERM_PM72=y
 CONFIG_WINDFARM=y
@@ -643,6 +659,7 @@ CONFIG_TIGON3=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -739,6 +756,7 @@ CONFIG_SERIO=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -754,6 +772,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
 
 #
 # IPMI
@@ -764,6 +783,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
@@ -774,6 +794,7 @@ CONFIG_GEN_RTC=y
 # Ftape, the floppy tape device driver
 #
 CONFIG_AGP=m
+# CONFIG_AGP_SIS is not set
 # CONFIG_AGP_VIA is not set
 CONFIG_AGP_UNINORTH=m
 # CONFIG_DRM is not set
@@ -813,6 +834,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
@@ -849,7 +871,6 @@ CONFIG_I2C_POWERMAC=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -865,6 +886,7 @@ CONFIG_I2C_POWERMAC=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -875,22 +897,19 @@ CONFIG_I2C_POWERMAC=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 CONFIG_FB_MACMODES=y
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
 CONFIG_FB_OF=y
-# CONFIG_FB_CONTROL is not set
-# CONFIG_FB_PLATINUM is not set
-# CONFIG_FB_VALKYRIE is not set
-# CONFIG_FB_CT65550 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 # CONFIG_FB_VGA16 is not set
@@ -990,6 +1009,18 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1026,6 +1057,17 @@ CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_POWERMAC=m
 CONFIG_SND_POWERMAC_AUTO_DRC=y
 
+#
+# Apple Onboard Audio driver
+#
+CONFIG_SND_AOA=m
+CONFIG_SND_AOA_FABRIC_LAYOUT=m
+CONFIG_SND_AOA_ONYX=m
+CONFIG_SND_AOA_TAS=m
+CONFIG_SND_AOA_TOONIE=m
+CONFIG_SND_AOA_SOUNDBUS=m
+CONFIG_SND_AOA_SOUNDBUS_I2S=m
+
 #
 # USB devices
 #
@@ -1060,6 +1102,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
@@ -1110,9 +1153,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -1155,6 +1196,7 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
@@ -1162,6 +1204,7 @@ CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
 CONFIG_USB_SERIAL_IR=m
@@ -1191,9 +1234,11 @@ CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
 CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 CONFIG_USB_SERIAL_TI=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EZUSB=y
 
@@ -1207,10 +1252,12 @@ CONFIG_USB_EZUSB=y
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+CONFIG_USB_APPLEDISPLAY=m
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
@@ -1234,6 +1281,14 @@ CONFIG_USB_EZUSB=y
 #
 # CONFIG_NEW_LEDS is not set
 
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
 #
 # InfiniBand support
 #
@@ -1248,6 +1303,19 @@ CONFIG_USB_EZUSB=y
 #
 # CONFIG_RTC_CLASS is not set
 
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
 #
 # File systems
 #
@@ -1273,7 +1341,6 @@ CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
@@ -1282,6 +1349,7 @@ CONFIG_XFS_POSIX_ACL=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
@@ -1363,7 +1431,9 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
 # CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1444,6 +1514,9 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
@@ -1457,14 +1530,19 @@ CONFIG_OPROFILE=y
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
@@ -1476,11 +1554,7 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_DEBUGGER is not set
 CONFIG_IRQSTACKS=y
 CONFIG_BOOTX_TEXT=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options

arch/powerpc/configs/iseries_defconfig

@@ -1,16 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc1
-# Wed Apr 19 11:46:44 2006
+# Linux kernel version: 2.6.18-rc3
+# Tue Aug  8 09:15:46 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
@@ -34,6 +36,7 @@ CONFIG_PPC_STD_MMU=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=32
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -51,6 +54,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 CONFIG_AUDIT=y
 CONFIG_AUDITSYSCALL=y
@@ -69,10 +73,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -113,10 +119,14 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_PPC_ISERIES=y
 # CONFIG_EMBEDDED6xx is not set
 # CONFIG_APUS is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_IBMVIO=y
 # CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
 
@@ -135,6 +145,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_LPARCFG=y
 # CONFIG_NUMA is not set
@@ -149,6 +160,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
 # CONFIG_PPC_64K_PAGES is not set
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
@@ -164,6 +176,7 @@ CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -207,6 +220,8 @@ CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -219,6 +234,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -246,9 +262,11 @@ CONFIG_NETFILTER_XT_MATCH_MARK=m
 # CONFIG_NETFILTER_XT_MATCH_POLICY is not set
 # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 
@@ -267,6 +285,7 @@ CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 # CONFIG_IP_NF_PPTP is not set
 # CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
@@ -360,6 +379,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -396,6 +416,7 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -453,6 +474,7 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -464,7 +486,6 @@ CONFIG_SCSI_IBMVSCSI=m
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
@@ -481,9 +502,7 @@ CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-CONFIG_MD_RAID6=m
+# CONFIG_MD_RAID456 is not set
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
@@ -596,6 +615,7 @@ CONFIG_E1000=m
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -696,6 +716,7 @@ CONFIG_SERIAL_ICOM=m
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
 
 #
 # IPMI
@@ -706,6 +727,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
@@ -741,7 +763,6 @@ CONFIG_MAX_RAW_DEVS=256
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -757,6 +778,7 @@ CONFIG_MAX_RAW_DEVS=256
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -766,7 +788,9 @@ CONFIG_MAX_RAW_DEVS=256
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -800,6 +824,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # CONFIG_NEW_LEDS is not set
 
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
 #
 # InfiniBand support
 #
@@ -814,6 +846,19 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # CONFIG_RTC_CLASS is not set
 
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
 #
 # File systems
 #
@@ -843,7 +888,6 @@ CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
@@ -852,6 +896,7 @@ CONFIG_XFS_POSIX_ACL=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
@@ -933,8 +978,10 @@ CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1013,10 +1060,12 @@ CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
 #
+# CONFIG_PROFILING is not set
 # CONFIG_KPROBES is not set
 
 #
@@ -1024,14 +1073,19 @@ CONFIG_TEXTSEARCH_FSM=m
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
@@ -1042,11 +1096,7 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUGGER is not set
 CONFIG_IRQSTACKS=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options

arch/powerpc/configs/pseries_defconfig

@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc4
-# Sun May 28 07:26:56 2006
+# Linux kernel version: 2.6.18-rc3
+# Tue Aug  8 09:14:48 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -35,6 +36,7 @@ CONFIG_PPC_STD_MMU=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=128
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -52,6 +54,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 CONFIG_AUDIT=y
 CONFIG_AUDITSYSCALL=y
@@ -70,10 +73,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -118,6 +123,9 @@ CONFIG_PPC_PSERIES=y
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_XICS=y
 # CONFIG_U3_DART is not set
 CONFIG_MPIC=y
@@ -149,6 +157,7 @@ CONFIG_BINFMT_MISC=m
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
 CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
@@ -173,6 +182,7 @@ CONFIG_SPARSEMEM_EXTREME=y
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 # CONFIG_PPC_64K_PAGES is not set
 CONFIG_SCHED_SMT=y
@@ -190,6 +200,7 @@ CONFIG_PPC_I8259=y
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -238,6 +249,8 @@ CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -250,6 +263,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -277,6 +291,7 @@ CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 # CONFIG_IP_NF_PPTP is not set
 # CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
 CONFIG_IP_NF_QUEUE=m
 
 #
@@ -316,6 +331,7 @@ CONFIG_LLC=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -332,6 +348,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -352,6 +369,7 @@ CONFIG_PARPORT_PC=m
 # CONFIG_PARPORT_PC_FIFO is not set
 # CONFIG_PARPORT_PC_SUPERIO is not set
 # CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
 # CONFIG_PARPORT_1284 is not set
 
 #
@@ -376,6 +394,7 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -487,6 +506,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -508,12 +528,6 @@ CONFIG_SCSI_IPR_TRACE=y
 CONFIG_SCSI_IPR_DUMP=y
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA_FC=m
-CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA24XX=m
 CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -528,9 +542,7 @@ CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_RAID6=m
+# CONFIG_MD_RAID456 is not set
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
@@ -651,6 +663,7 @@ CONFIG_IXGB=m
 # CONFIG_IXGB_NAPI is not set
 CONFIG_S2IO=m
 # CONFIG_S2IO_NAPI is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -754,6 +767,7 @@ CONFIG_SERIO_LIBPS2=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -776,6 +790,7 @@ CONFIG_SERIAL_JSM=m
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
 # CONFIG_PRINTER is not set
 # CONFIG_PPDEV is not set
 # CONFIG_TIPAR is not set
@@ -793,6 +808,7 @@ CONFIG_HVCS=m
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
@@ -839,6 +855,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -876,7 +893,6 @@ CONFIG_I2C_ALGOBIT=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -892,6 +908,7 @@ CONFIG_I2C_ALGOBIT=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -902,19 +919,19 @@ CONFIG_I2C_ALGOBIT=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 CONFIG_FB_MACMODES=y
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
 CONFIG_FB_OF=y
-# CONFIG_FB_CT65550 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 # CONFIG_FB_VGA16 is not set
@@ -993,6 +1010,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
@@ -1083,10 +1101,12 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
@@ -1124,12 +1144,14 @@ CONFIG_USB_MON=y
 CONFIG_INFINIBAND=m
 CONFIG_INFINIBAND_USER_MAD=m
 CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
 CONFIG_INFINIBAND_MTHCA_DEBUG=y
 CONFIG_INFINIBAND_IPOIB=m
 CONFIG_INFINIBAND_IPOIB_DEBUG=y
 # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
 CONFIG_INFINIBAND_SRP=m
+# CONFIG_INFINIBAND_ISER is not set
 
 #
 # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
@@ -1140,6 +1162,19 @@ CONFIG_INFINIBAND_SRP=m
 #
 # CONFIG_RTC_CLASS is not set
 
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
 #
 # File systems
 #
@@ -1169,15 +1204,16 @@ CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
 CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -1259,8 +1295,10 @@ CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1326,6 +1364,9 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
@@ -1339,14 +1380,19 @@ CONFIG_KPROBES=y
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y

arch/powerpc/kernel/Makefile

@@ -67,9 +67,9 @@ pci64-$(CONFIG_PPC64)		+= pci_64.o pci_dn.o pci_iommu.o \
 				   pci_direct_iommu.o iomap.o
 pci32-$(CONFIG_PPC32)		:= pci_32.o
 obj-$(CONFIG_PCI)		+= $(pci64-y) $(pci32-y)
-kexec-$(CONFIG_PPC64)		:= machine_kexec_64.o crash.o
+kexec-$(CONFIG_PPC64)		:= machine_kexec_64.o
 kexec-$(CONFIG_PPC32)		:= machine_kexec_32.o
-obj-$(CONFIG_KEXEC)		+= machine_kexec.o $(kexec-y)
+obj-$(CONFIG_KEXEC)		+= machine_kexec.o crash.o $(kexec-y)
 
 ifeq ($(CONFIG_PPC_ISERIES),y)
 $(obj)/head_64.o: $(obj)/lparmap.s

arch/powerpc/kernel/cpu_setup_power4.S

@@ -76,6 +76,8 @@ _GLOBAL(__setup_cpu_ppc970)
 	mfspr	r0,SPRN_HID0
 	li	r11,5			/* clear DOZE and SLEEP */
 	rldimi	r0,r11,52,8		/* set NAP and DPM */
+	li	r11,0
+	rldimi	r0,r11,32,31		/* clear EN_ATTN */
 	mtspr	SPRN_HID0,r0
 	mfspr	r0,SPRN_HID0
 	mfspr	r0,SPRN_HID0

arch/powerpc/kernel/crash.c

@@ -44,6 +44,7 @@
 /* This keeps a track of which one is crashing cpu. */
 int crashing_cpu = -1;
 static cpumask_t cpus_in_crash = CPU_MASK_NONE;
+cpumask_t cpus_in_sr = CPU_MASK_NONE;
 
 static u32 *append_elf_note(u32 *buf, char *name, unsigned type, void *data,
 							       size_t data_len)
@@ -139,7 +140,13 @@ void crash_ipi_callback(struct pt_regs *regs)
 
 	if (ppc_md.kexec_cpu_down)
 		ppc_md.kexec_cpu_down(1, 1);
+
+#ifdef CONFIG_PPC64
 	kexec_smp_wait();
+#else
+	for (;;);	/* FIXME */
+#endif
+
 	/* NOTREACHED */
 }
 
@@ -255,7 +262,11 @@ static void crash_kexec_prepare_cpus(int cpu)
 	 *
 	 * do this if kexec in setup.c ?
 	 */
+#ifdef CONFIG_PPC64
 	smp_release_cpus();
+#else
+	/* FIXME */
+#endif
 }
 
 void crash_kexec_secondary(struct pt_regs *regs)

arch/powerpc/kernel/irq.c

@@ -693,7 +693,7 @@ unsigned int irq_radix_revmap(struct irq_host *host,
 	/* If not there, try to insert it */
 	virq = irq_find_mapping(host, hwirq);
 	if (virq != NO_IRQ)
-		radix_tree_insert(tree, virq, &irq_map[virq]);
+		radix_tree_insert(tree, hwirq, &irq_map[virq]);
  bail:
 	spin_unlock_irqrestore(&irq_big_lock, flags);
 	return virq;

arch/powerpc/kernel/kprobes.c

@@ -61,6 +61,8 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 	if (!ret) {
 		memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
 		p->opcode = *p->addr;
+		flush_icache_range((unsigned long)p->ainsn.insn,
+			(unsigned long)p->ainsn.insn + sizeof(kprobe_opcode_t));
 	}
 
 	return ret;

arch/powerpc/kernel/machine_kexec.c

@@ -13,6 +13,7 @@
 #include <linux/reboot.h>
 #include <linux/threads.h>
 #include <asm/machdep.h>
+#include <asm/lmb.h>
 
 void machine_crash_shutdown(struct pt_regs *regs)
 {
@@ -59,3 +60,58 @@ NORET_TYPE void machine_kexec(struct kimage *image)
 	}
 	for(;;);
 }
+
+static int __init early_parse_crashk(char *p)
+{
+	unsigned long size;
+
+	if (!p)
+		return 1;
+
+	size = memparse(p, &p);
+
+	if (*p == '@')
+		crashk_res.start = memparse(p + 1, &p);
+	else
+		crashk_res.start = KDUMP_KERNELBASE;
+
+	crashk_res.end = crashk_res.start + size - 1;
+
+	return 0;
+}
+early_param("crashkernel", early_parse_crashk);
+
+void __init reserve_crashkernel(void)
+{
+	unsigned long size;
+
+	if (crashk_res.start == 0)
+		return;
+
+	/* We might have got these values via the command line or the
+	 * device tree, either way sanitise them now. */
+
+	size = crashk_res.end - crashk_res.start + 1;
+
+	if (crashk_res.start != KDUMP_KERNELBASE)
+		printk("Crash kernel location must be 0x%x\n",
+				KDUMP_KERNELBASE);
+
+	crashk_res.start = KDUMP_KERNELBASE;
+	size = PAGE_ALIGN(size);
+	crashk_res.end = crashk_res.start + size - 1;
+
+	/* Crash kernel trumps memory limit */
+	if (memory_limit && memory_limit <= crashk_res.end) {
+		memory_limit = crashk_res.end + 1;
+		printk("Adjusted memory limit for crashkernel, now 0x%lx\n",
+				memory_limit);
+	}
+
+	lmb_reserve(crashk_res.start, size);
+}
+
+int overlaps_crashkernel(unsigned long start, unsigned long size)
+{
+	return (start + size) > crashk_res.start && start <= crashk_res.end;
+}

arch/powerpc/kernel/machine_kexec_64.c

@@ -10,7 +10,6 @@
  */
 
 
-#include <linux/cpumask.h>
 #include <linux/kexec.h>
 #include <linux/smp.h>
 #include <linux/thread_info.h>
@@ -21,7 +20,6 @@
 #include <asm/machdep.h>
 #include <asm/cacheflush.h>
 #include <asm/paca.h>
-#include <asm/lmb.h>
 #include <asm/mmu.h>
 #include <asm/sections.h>	/* _end */
 #include <asm/prom.h>
@@ -385,58 +383,3 @@ static int __init kexec_setup(void)
 	return 0;
 }
 __initcall(kexec_setup);
-
-static int __init early_parse_crashk(char *p)
-{
-	unsigned long size;
-
-	if (!p)
-		return 1;
-
-	size = memparse(p, &p);
-
-	if (*p == '@')
-		crashk_res.start = memparse(p + 1, &p);
-	else
-		crashk_res.start = KDUMP_KERNELBASE;
-
-	crashk_res.end = crashk_res.start + size - 1;
-
-	return 0;
-}
-early_param("crashkernel", early_parse_crashk);
-
-void __init reserve_crashkernel(void)
-{
-	unsigned long size;
-
-	if (crashk_res.start == 0)
-		return;
-
-	/* We might have got these values via the command line or the
-	 * device tree, either way sanitise them now. */
-
-	size = crashk_res.end - crashk_res.start + 1;
-
-	if (crashk_res.start != KDUMP_KERNELBASE)
-		printk("Crash kernel location must be 0x%x\n",
-				KDUMP_KERNELBASE);
-
-	crashk_res.start = KDUMP_KERNELBASE;
-	size = PAGE_ALIGN(size);
-	crashk_res.end = crashk_res.start + size - 1;
-
-	/* Crash kernel trumps memory limit */
-	if (memory_limit && memory_limit <= crashk_res.end) {
-		memory_limit = crashk_res.end + 1;
-		printk("Adjusted memory limit for crashkernel, now 0x%lx\n",
-				memory_limit);
-	}
-
-	lmb_reserve(crashk_res.start, size);
-}
-
-int overlaps_crashkernel(unsigned long start, unsigned long size)
-{
-	return (start + size) > crashk_res.start && start <= crashk_res.end;
-}

arch/powerpc/kernel/rtas.c

@@ -569,6 +569,27 @@ int rtas_set_indicator(int indicator, int index, int new_value)
 }
 EXPORT_SYMBOL(rtas_set_indicator);
 
+/*
+ * Ignoring RTAS extended delay
+ */
+int rtas_set_indicator_fast(int indicator, int index, int new_value)
+{
+	int rc;
+	int token = rtas_token("set-indicator");
+
+	if (token == RTAS_UNKNOWN_SERVICE)
+		return -ENOENT;
+
+	rc = rtas_call(token, 3, 1, NULL, indicator, index, new_value);
+
+	WARN_ON(rc == -2 || (rc >= 9900 && rc <= 9905));
+
+	if (rc < 0)
+		return rtas_error_rc(rc);
+
+	return rc;
+}
+
 void rtas_restart(char *cmd)
 {
 	if (rtas_flash_term_hook)

arch/powerpc/kernel/traps.c

@@ -55,9 +55,6 @@
 
 #ifdef CONFIG_PPC64	/* XXX */
 #define _IO_BASE	pci_io_base
-#ifdef CONFIG_KEXEC
-cpumask_t cpus_in_sr = CPU_MASK_NONE;
-#endif
 #endif
 
 #ifdef CONFIG_DEBUGGER
@@ -151,7 +148,7 @@ int die(const char *str, struct pt_regs *regs, long err)
 		panic("Fatal exception in interrupt");
 
 	if (panic_on_oops)
-		panic("Fatal exception: panic_on_oops");
+		panic("Fatal exception");
 
 	do_exit(err);
 
@@ -211,6 +208,19 @@ void system_reset_exception(struct pt_regs *regs)
 
 	die("System Reset", regs, SIGABRT);
 
+	/*
+	 * Some CPUs when released from the debugger will execute this path.
+	 * These CPUs entered the debugger via a soft-reset. If the CPU was
+	 * hung before entering the debugger it will return to the hung
+	 * state when exiting this function.  This causes a problem in
+	 * kdump since the hung CPU(s) will not respond to the IPI sent
+	 * from kdump. To prevent the problem we call crash_kexec_secondary()
+	 * here. If a kdump had not been initiated or we exit the debugger
+	 * with the "exit and recover" command (x) crash_kexec_secondary()
+	 * will return after 5ms and the CPU returns to its previous state.
+	 */
+	crash_kexec_secondary(regs);
+
 	/* Must die if the interrupt is not recoverable */
 	if (!(regs->msr & MSR_RI))
 		panic("Unrecoverable System Reset");

arch/powerpc/platforms/pseries/setup.c

@@ -213,8 +213,6 @@ static void pseries_lpar_enable_pmcs(void)
 {
 	unsigned long set, reset;
 
-	power4_enable_pmcs();
-
 	set = 1UL << 63;
 	reset = 0;
 	plpar_hcall_norets(H_PERFMON, set, reset);

arch/powerpc/platforms/pseries/xics.c

@@ -467,7 +467,7 @@ void xics_setup_cpu(void)
 	 *
 	 * XXX: undo of teardown on kexec needs this too, as may hotplug
 	 */
-	rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE,
+	rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE,
 		(1UL << interrupt_server_size) - 1 - default_distrib_server, 1);
 }
 
@@ -796,7 +796,7 @@ void xics_teardown_cpu(int secondary)
 	 * so leave the master cpu in the group.
 	 */
 	if (secondary)
-		rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE,
+		rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE,
 				   (1UL << interrupt_server_size) - 1 -
 				   default_distrib_server, 0);
 }
@@ -813,7 +813,7 @@ void xics_migrate_irqs_away(void)
 	xics_set_cpu_priority(cpu, 0);
 
 	/* remove ourselves from the global interrupt queue */
-	status = rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE,
+	status = rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE,
 		(1UL << interrupt_server_size) - 1 - default_distrib_server, 0);
 	WARN_ON(status < 0);
 

arch/powerpc/sysdev/fsl_soc.c

@@ -169,8 +169,16 @@ static int __init gfar_of_init(void)
 			goto err;
 		}
 
-		mac_addr = get_property(np, "address", NULL);
-		memcpy(gfar_data.mac_addr, mac_addr, 6);
+		mac_addr = get_property(np, "local-mac-address", NULL);
+		if (mac_addr == NULL)
+			mac_addr = get_property(np, "mac-address", NULL);
+		if (mac_addr == NULL) {
+			/* Obsolete */
+			mac_addr = get_property(np, "address", NULL);
+		}
+
+		if (mac_addr)
+			memcpy(gfar_data.mac_addr, mac_addr, 6);
 
 		if (model && !strcasecmp(model, "TSEC"))
 			gfar_data.device_flags =

arch/s390/appldata/appldata_base.c

@@ -618,7 +618,7 @@ appldata_offline_cpu(int cpu)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-static int
+static int __cpuinit
 appldata_cpu_notify(struct notifier_block *self,
 		    unsigned long action, void *hcpu)
 {

arch/s390/mm/init.c

@@ -129,7 +129,7 @@ void __init paging_init(void)
                 /*
                  * pg_table is physical at this point
                  */
-		pg_table = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
+		pg_table = (pte_t *) alloc_bootmem_pages(PAGE_SIZE);
 
                 pg_dir->pgd0 =  (_PAGE_TABLE | __pa(pg_table));
                 pg_dir->pgd1 =  (_PAGE_TABLE | (__pa(pg_table)+1024));
@@ -219,7 +219,7 @@ void __init paging_init(void)
                         continue;
                 }          
         
-	        pm_dir = (pmd_t *) alloc_bootmem_low_pages(PAGE_SIZE*4);
+		pm_dir = (pmd_t *) alloc_bootmem_pages(PAGE_SIZE * 4);
                 pgd_populate(&init_mm, pg_dir, pm_dir);
 
                 for (j = 0 ; j < PTRS_PER_PMD ; j++,pm_dir++) {
@@ -228,7 +228,7 @@ void __init paging_init(void)
                                 continue; 
                         }          
                         
-                        pt_dir = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
+			pt_dir = (pte_t *) alloc_bootmem_pages(PAGE_SIZE);
                         pmd_populate_kernel(&init_mm, pm_dir, pt_dir);
 	
                         for (k = 0 ; k < PTRS_PER_PTE ; k++,pt_dir++) {

arch/x86_64/kernel/traps.c

@@ -529,7 +529,7 @@ void __kprobes oops_end(unsigned long flags)
 		/* Nest count reaches zero, release the lock. */
 		spin_unlock_irqrestore(&die_lock, flags);
 	if (panic_on_oops)
-		panic("Fatal exception: panic_on_oops");
+		panic("Fatal exception");
 }
 
 void __kprobes __die(const char * str, struct pt_regs * regs, long err)

arch/xtensa/kernel/traps.c

@@ -488,7 +488,7 @@ void die(const char * str, struct pt_regs * regs, long err)
 		panic("Fatal exception in interrupt");
 
 	if (panic_on_oops)
-		panic("Fatal exception: panic_on_oops");
+		panic("Fatal exception");
 
 	do_exit(err);
 }

drivers/char/watchdog/Kconfig

@@ -45,7 +45,7 @@ config WATCHDOG_NOWAYOUT
 comment "Watchdog Device Drivers"
 	depends on WATCHDOG
 
-# Architecture Independant
+# Architecture Independent
 
 config SOFT_WATCHDOG
 	tristate "Software watchdog"
@@ -127,7 +127,7 @@ config S3C2410_WATCHDOG
 	  enabled.
 
 	  The driver is limited by the speed of the system's PCLK
-	  signal, so with reasonbaly fast systems (PCLK around 50-66MHz)
+	  signal, so with reasonably fast systems (PCLK around 50-66MHz)
 	  then watchdog intervals of over approximately 20seconds are
 	  unavailable.
 
@@ -423,7 +423,7 @@ config SBC_EPX_C3_WATCHDOG
 	  is no way to know if writing to its IO address will corrupt
 	  your system or have any real effect.  The only way to be sure
 	  that this driver does what you want is to make sure you
-	  are runnning it on an EPX-C3 from Winsystems with the watchdog
+	  are running it on an EPX-C3 from Winsystems with the watchdog
 	  timer at IO address 0x1ee and 0x1ef.  It will write to both those
 	  IO ports.  Basically, the assumption is made that if you compile
 	  this driver into your kernel and/or load it as a module, that you
@@ -472,7 +472,7 @@ config INDYDOG
 	tristate "Indy/I2 Hardware Watchdog"
 	depends on WATCHDOG && SGI_IP22
 	help
-	  Hardwaredriver for the Indy's/I2's watchdog. This is a
+	  Hardware driver for the Indy's/I2's watchdog. This is a
 	  watchdog timer that will reboot the machine after a 60 second
 	  timer expired and no process has written to /dev/watchdog during
 	  that time.

drivers/ide/pci/generic.c

@@ -180,6 +180,36 @@ static ide_pci_device_t generic_chipsets[] __devinitdata = {
 		.channels	= 2,
 		.autodma	= AUTODMA,
 		.bootable	= OFF_BOARD,
+	},{	/* 15 */
+		.name		= "JMB361",
+		.init_hwif	= init_hwif_generic,
+		.channels	= 2,
+		.autodma	= AUTODMA,
+		.bootable	= OFF_BOARD,
+	},{	/* 16 */
+		.name		= "JMB363",
+		.init_hwif	= init_hwif_generic,
+		.channels	= 2,
+		.autodma	= AUTODMA,
+		.bootable	= OFF_BOARD,
+	},{	/* 17 */
+		.name		= "JMB365",
+		.init_hwif	= init_hwif_generic,
+		.channels	= 2,
+		.autodma	= AUTODMA,
+		.bootable	= OFF_BOARD,
+	},{	/* 18 */
+		.name		= "JMB366",
+		.init_hwif	= init_hwif_generic,
+		.channels	= 2,
+		.autodma	= AUTODMA,
+		.bootable	= OFF_BOARD,
+	},{	/* 19 */
+		.name		= "JMB368",
+		.init_hwif	= init_hwif_generic,
+		.channels	= 2,
+		.autodma	= AUTODMA,
+		.bootable	= OFF_BOARD,
 	}
 };
 

drivers/md/dm-mpath.c

@@ -710,6 +710,8 @@ static int multipath_ctr(struct dm_target *ti, unsigned int argc,
 		return -EINVAL;
 	}
 
+	m->ti = ti;
+
 	r = parse_features(&as, m, ti);
 	if (r)
 		goto bad;
@@ -751,7 +753,6 @@ static int multipath_ctr(struct dm_target *ti, unsigned int argc,
 	}
 
 	ti->private = m;
-	m->ti = ti;
 
 	return 0;
 

drivers/media/dvb/bt8xx/dst.c

@@ -393,7 +393,7 @@ static int dst_set_bandwidth(struct dst_state *state, fe_bandwidth_t bandwidth)
 	state->bandwidth = bandwidth;
 
 	if (state->dst_type != DST_TYPE_IS_TERR)
-		return 0;
+		return -EOPNOTSUPP;
 
 	switch (bandwidth) {
 	case BANDWIDTH_6_MHZ:
@@ -462,7 +462,7 @@ static int dst_set_symbolrate(struct dst_state *state, u32 srate)
 
 	state->symbol_rate = srate;
 	if (state->dst_type == DST_TYPE_IS_TERR) {
-		return 0;
+		return -EOPNOTSUPP;
 	}
 	dprintk(verbose, DST_INFO, 1, "set symrate %u", srate);
 	srate /= 1000;
@@ -504,7 +504,7 @@ static int dst_set_symbolrate(struct dst_state *state, u32 srate)
 static int dst_set_modulation(struct dst_state *state, fe_modulation_t modulation)
 {
 	if (state->dst_type != DST_TYPE_IS_CABLE)
-		return 0;
+		return -EOPNOTSUPP;
 
 	state->modulation = modulation;
 	switch (modulation) {
@@ -1234,7 +1234,7 @@ int dst_command(struct dst_state *state, u8 *data, u8 len)
 		goto error;
 	}
 	if (write_dst(state, data, len)) {
-		dprintk(verbose, DST_INFO, 1, "Tring to recover.. ");
+		dprintk(verbose, DST_INFO, 1, "Trying to recover.. ");
 		if ((dst_error_recovery(state)) < 0) {
 			dprintk(verbose, DST_ERROR, 1, "Recovery Failed.");
 			goto error;
@@ -1328,15 +1328,13 @@ static int dst_tone_power_cmd(struct dst_state *state)
 {
 	u8 paket[8] = { 0x00, 0x09, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00 };
 
-	if (state->dst_type == DST_TYPE_IS_TERR)
-		return 0;
+	if (state->dst_type != DST_TYPE_IS_SAT)
+		return -EOPNOTSUPP;
 	paket[4] = state->tx_tuna[4];
 	paket[2] = state->tx_tuna[2];
 	paket[3] = state->tx_tuna[3];
 	paket[7] = dst_check_sum (paket, 7);
-	dst_command(state, paket, 8);
-
-	return 0;
+	return dst_command(state, paket, 8);
 }
 
 static int dst_get_tuna(struct dst_state *state)
@@ -1465,7 +1463,7 @@ static int dst_set_diseqc(struct dvb_frontend *fe, struct dvb_diseqc_master_cmd
 	u8 paket[8] = { 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf0, 0xec };
 
 	if (state->dst_type != DST_TYPE_IS_SAT)
-		return 0;
+		return -EOPNOTSUPP;
 	if (cmd->msg_len > 0 && cmd->msg_len < 5)
 		memcpy(&paket[3], cmd->msg, cmd->msg_len);
 	else if (cmd->msg_len == 5 && state->dst_hw_cap & DST_TYPE_HAS_DISEQC5)
@@ -1473,18 +1471,17 @@ static int dst_set_diseqc(struct dvb_frontend *fe, struct dvb_diseqc_master_cmd
 	else
 		return -EINVAL;
 	paket[7] = dst_check_sum(&paket[0], 7);
-	dst_command(state, paket, 8);
-	return 0;
+	return dst_command(state, paket, 8);
 }
 
 static int dst_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
 {
-	int need_cmd;
+	int need_cmd, retval = 0;
 	struct dst_state *state = fe->demodulator_priv;
 
 	state->voltage = voltage;
 	if (state->dst_type != DST_TYPE_IS_SAT)
-		return 0;
+		return -EOPNOTSUPP;
 
 	need_cmd = 0;
 
@@ -1506,9 +1503,9 @@ static int dst_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
 	}
 
 	if (need_cmd)
-		dst_tone_power_cmd(state);
+		retval = dst_tone_power_cmd(state);
 
-	return 0;
+	return retval;
 }
 
 static int dst_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
@@ -1517,7 +1514,7 @@ static int dst_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
 
 	state->tone = tone;
 	if (state->dst_type != DST_TYPE_IS_SAT)
-		return 0;
+		return -EOPNOTSUPP;
 
 	switch (tone) {
 	case SEC_TONE_OFF:
@@ -1533,9 +1530,7 @@ static int dst_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
 	default:
 		return -EINVAL;
 	}
-	dst_tone_power_cmd(state);
-
-	return 0;
+	return dst_tone_power_cmd(state);
 }
 
 static int dst_send_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t minicmd)
@@ -1543,7 +1538,7 @@ static int dst_send_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t minicmd)
 	struct dst_state *state = fe->demodulator_priv;
 
 	if (state->dst_type != DST_TYPE_IS_SAT)
-		return 0;
+		return -EOPNOTSUPP;
 	state->minicmd = minicmd;
 	switch (minicmd) {
 	case SEC_MINI_A:
@@ -1553,9 +1548,7 @@ static int dst_send_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t minicmd)
 		state->tx_tuna[3] = 0xff;
 		break;
 	}
-	dst_tone_power_cmd(state);
-
-	return 0;
+	return dst_tone_power_cmd(state);
 }
 
 
@@ -1608,28 +1601,31 @@ static int dst_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
 {
 	struct dst_state *state = fe->demodulator_priv;
 
-	dst_get_signal(state);
+	int retval = dst_get_signal(state);
 	*strength = state->decode_strength;
 
-	return 0;
+	return retval;
 }
 
 static int dst_read_snr(struct dvb_frontend *fe, u16 *snr)
 {
 	struct dst_state *state = fe->demodulator_priv;
 
-	dst_get_signal(state);
+	int retval = dst_get_signal(state);
 	*snr = state->decode_snr;
 
-	return 0;
+	return retval;
 }
 
 static int dst_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p)
 {
+	int retval = -EINVAL;
 	struct dst_state *state = fe->demodulator_priv;
 
 	if (p != NULL) {
-		dst_set_freq(state, p->frequency);
+		retval = dst_set_freq(state, p->frequency);
+		if(retval != 0)
+			return retval;
 		dprintk(verbose, DST_DEBUG, 1, "Set Frequency=[%d]", p->frequency);
 
 		if (state->dst_type == DST_TYPE_IS_SAT) {
@@ -1647,10 +1643,10 @@ static int dst_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_paramet
 			dst_set_symbolrate(state, p->u.qam.symbol_rate);
 			dst_set_modulation(state, p->u.qam.modulation);
 		}
-		dst_write_tuna(fe);
+		retval = dst_write_tuna(fe);
 	}
 
-	return 0;
+	return retval;
 }
 
 static int dst_tune_frontend(struct dvb_frontend* fe,

drivers/media/dvb/dvb-core/Makefile

@@ -2,8 +2,8 @@
 # Makefile for the kernel DVB device drivers.
 #
 
-dvb-core-objs = dvbdev.o dmxdev.o dvb_demux.o dvb_filter.o 	\
-		dvb_ca_en50221.o dvb_frontend.o 		\
-		dvb_net.o dvb_ringbuffer.o dvb_math.o
+dvb-core-objs := dvbdev.o dmxdev.o dvb_demux.o dvb_filter.o 	\
+		 dvb_ca_en50221.o dvb_frontend.o 		\
+		 dvb_net.o dvb_ringbuffer.o dvb_math.o
 
 obj-$(CONFIG_DVB_CORE) += dvb-core.o

drivers/media/radio/Kconfig

@@ -350,5 +350,15 @@ config RADIO_ZOLTRIX_PORT
 	help
 	  Enter the I/O port of your Zoltrix radio card.
 
-endmenu
+config USB_DSBR
+	tristate "D-Link USB FM radio support (EXPERIMENTAL)"
+	depends on USB && VIDEO_V4L1 && EXPERIMENTAL
+	---help---
+	  Say Y here if you want to connect this type of radio to your
+	  computer's USB port. Note that the audio is not digital, and
+	  you must connect the line out connector to a sound card or a
+	  set of speakers.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called dsbr100.
+endmenu

drivers/media/radio/Makefile

@@ -20,5 +20,6 @@ obj-$(CONFIG_RADIO_GEMTEK) += radio-gemtek.o
 obj-$(CONFIG_RADIO_GEMTEK_PCI) += radio-gemtek-pci.o
 obj-$(CONFIG_RADIO_TRUST) += radio-trust.o
 obj-$(CONFIG_RADIO_MAESTRO) += radio-maestro.o
+obj-$(CONFIG_USB_DSBR) += dsbr100.o
 
 EXTRA_CFLAGS += -Isound

drivers/media/video/Kconfig

@@ -449,18 +449,6 @@ source "drivers/media/video/pvrusb2/Kconfig"
 
 source "drivers/media/video/em28xx/Kconfig"
 
-config USB_DSBR
-	tristate "D-Link USB FM radio support (EXPERIMENTAL)"
-	depends on USB && VIDEO_V4L1 && EXPERIMENTAL
-	---help---
-	  Say Y here if you want to connect this type of radio to your
-	  computer's USB port. Note that the audio is not digital, and
-	  you must connect the line out connector to a sound card or a
-	  set of speakers.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called dsbr100.
-
 source "drivers/media/video/usbvideo/Kconfig"
 
 source "drivers/media/video/et61x251/Kconfig"

drivers/media/video/Makefile

@@ -77,7 +77,6 @@ obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o
 obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o
 
 obj-$(CONFIG_USB_DABUSB)        += dabusb.o
-obj-$(CONFIG_USB_DSBR)          += dsbr100.o
 obj-$(CONFIG_USB_OV511)         += ov511.o
 obj-$(CONFIG_USB_SE401)         += se401.o
 obj-$(CONFIG_USB_STV680)        += stv680.o
@@ -91,6 +90,7 @@ obj-$(CONFIG_USB_ZC0301)        += zc0301/
 obj-$(CONFIG_USB_IBMCAM)        += usbvideo/
 obj-$(CONFIG_USB_KONICAWC)      += usbvideo/
 obj-$(CONFIG_USB_VICAM)         += usbvideo/
+obj-$(CONFIG_USB_QUICKCAM_MESSENGER)	+= usbvideo/
 
 obj-$(CONFIG_VIDEO_VIVI) += vivi.o
 

drivers/media/video/compat_ioctl32.c

@@ -21,7 +21,7 @@
 
 #ifdef CONFIG_COMPAT
 
-
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 struct video_tuner32 {
 	compat_int_t tuner;
 	char name[32];
@@ -107,6 +107,7 @@ struct video_window32 {
 	compat_caddr_t clips;
 	compat_int_t clipcount;
 };
+#endif
 
 static int native_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
@@ -124,6 +125,7 @@ static int native_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 }
 
 
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 /* You get back everything except the clips... */
 static int put_video_window32(struct video_window *kp, struct video_window32 __user *up)
 {
@@ -138,6 +140,7 @@ static int put_video_window32(struct video_window *kp, struct video_window32 __u
 			return -EFAULT;
 	return 0;
 }
+#endif
 
 struct v4l2_clip32
 {
@@ -490,6 +493,7 @@ static inline int put_v4l2_input(struct v4l2_input *kp, struct v4l2_input __user
 	return 0;
 }
 
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 struct video_code32
 {
 	char		loadwhat[16];	/* name or tag of file being passed */
@@ -517,6 +521,8 @@ static inline int microcode32(struct video_code *kp, struct video_code32 __user
 #define VIDIOCSFREQ32		_IOW('v',15, u32)
 #define VIDIOCSMICROCODE32	_IOW('v',27, struct video_code32)
 
+#endif
+
 /* VIDIOC_ENUMINPUT32 is VIDIOC_ENUMINPUT minus 4 bytes of padding alignement */
 #define VIDIOC_ENUMINPUT32	VIDIOC_ENUMINPUT - _IOC(0, 0, 0, 4)
 #define VIDIOC_G_FMT32		_IOWR ('V',  4, struct v4l2_format32)
@@ -537,6 +543,7 @@ static inline int microcode32(struct video_code *kp, struct video_code32 __user
 #define VIDIOC_S_INPUT32	_IOWR ('V', 39, compat_int_t)
 #define VIDIOC_TRY_FMT32      	_IOWR ('V', 64, struct v4l2_format32)
 
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 enum {
 	MaxClips = (~0U-sizeof(struct video_window))/sizeof(struct video_clip)
 };
@@ -601,14 +608,17 @@ static int do_set_window(struct file *file, unsigned int cmd, unsigned long arg)
 
 	return native_ioctl(file, VIDIOCSWIN, (unsigned long)vw);
 }
+#endif
 
 static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	union {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 		struct video_tuner vt;
 		struct video_buffer vb;
 		struct video_window vw;
 		struct video_code vc;
+#endif
 		struct v4l2_format v2f;
 		struct v4l2_buffer v2b;
 		struct v4l2_framebuffer v2fb;
@@ -624,6 +634,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg
 
 	/* First, convert the command. */
 	switch(cmd) {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	case VIDIOCGTUNER32: cmd = VIDIOCGTUNER; break;
 	case VIDIOCSTUNER32: cmd = VIDIOCSTUNER; break;
 	case VIDIOCGWIN32: cmd = VIDIOCGWIN; break;
@@ -631,6 +642,8 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg
 	case VIDIOCSFBUF32: cmd = VIDIOCSFBUF; break;
 	case VIDIOCGFREQ32: cmd = VIDIOCGFREQ; break;
 	case VIDIOCSFREQ32: cmd = VIDIOCSFREQ; break;
+	case VIDIOCSMICROCODE32: cmd = VIDIOCSMICROCODE; break;
+#endif
 	case VIDIOC_G_FMT32: cmd = VIDIOC_G_FMT; break;
 	case VIDIOC_S_FMT32: cmd = VIDIOC_S_FMT; break;
 	case VIDIOC_QUERYBUF32: cmd = VIDIOC_QUERYBUF; break;
@@ -647,10 +660,10 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg
 	case VIDIOC_G_INPUT32: cmd = VIDIOC_G_INPUT; break;
 	case VIDIOC_S_INPUT32: cmd = VIDIOC_S_INPUT; break;
 	case VIDIOC_TRY_FMT32: cmd = VIDIOC_TRY_FMT; break;
-	case VIDIOCSMICROCODE32: cmd = VIDIOCSMICROCODE; break;
 	};
 
 	switch(cmd) {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	case VIDIOCSTUNER:
 	case VIDIOCGTUNER:
 		err = get_video_tuner32(&karg.vt, up);
@@ -664,6 +677,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg
 		break;
 
 	case VIDIOCSFREQ:
+#endif
 	case VIDIOC_S_INPUT:
 	case VIDIOC_OVERLAY:
 	case VIDIOC_STREAMON:
@@ -717,18 +731,21 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg
 		compatible_arg = 0;
 		break;
 
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	case VIDIOCGWIN:
 	case VIDIOCGFBUF:
 	case VIDIOCGFREQ:
+#endif
 	case VIDIOC_G_FBUF:
 	case VIDIOC_G_INPUT:
 		compatible_arg = 0;
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	case VIDIOCSMICROCODE:
 		err = microcode32(&karg.vc, up);
 		compatible_arg = 0;
 		break;
+#endif
 	};
-
 	if(err)
 		goto out;
 
@@ -743,6 +760,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg
 	}
 	if(err == 0) {
 		switch(cmd) {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 		case VIDIOCGTUNER:
 			err = put_video_tuner32(&karg.vt, up);
 			break;
@@ -754,7 +772,7 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg
 		case VIDIOCGFBUF:
 			err = put_video_buffer32(&karg.vb, up);
 			break;
-
+#endif
 		case VIDIOC_G_FBUF:
 			err = put_v4l2_framebuffer32(&karg.v2fb, up);
 			break;
@@ -792,7 +810,9 @@ static int do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg
 			err = put_v4l2_input32(&karg.v2i, up);
 			break;
 
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 		case VIDIOCGFREQ:
+#endif
 		case VIDIOC_G_INPUT:
 			err = put_user(((u32)karg.vx), (u32 __user *)up);
 			break;
@@ -810,6 +830,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
 		return ret;
 
 	switch (cmd) {
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	case VIDIOCSWIN32:
 		ret = do_set_window(file, cmd, arg);
 		break;
@@ -820,6 +841,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
 	case VIDIOCSFBUF32:
 	case VIDIOCGFREQ32:
 	case VIDIOCSFREQ32:
+#endif
 	case VIDIOC_QUERYCAP:
 	case VIDIOC_ENUM_FMT:
 	case VIDIOC_G_FMT32:
@@ -851,6 +873,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
 		ret = do_video_ioctl(file, cmd, arg);
 		break;
 
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	/* Little v, the video4linux ioctls (conflict?) */
 	case VIDIOCGCAP:
 	case VIDIOCGCHAN:
@@ -879,6 +902,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
 	case _IOR('v' , BASE_VIDIOCPRIVATE+7, int):
 		ret = native_ioctl(file, cmd, (unsigned long)compat_ptr(arg));
 		break;
+#endif
 	default:
 		v4l_print_ioctl("compat_ioctl32", cmd);
 	}

drivers/media/video/cx25840/cx25840-core.c

@@ -104,8 +104,8 @@ u32 cx25840_read4(struct i2c_client * client, u16 addr)
 	if (i2c_master_recv(client, buffer, 4) < 4)
 		return 0;
 
-	return (buffer[0] << 24) | (buffer[1] << 16) |
-	    (buffer[2] << 8) | buffer[3];
+	return (buffer[3] << 24) | (buffer[2] << 16) |
+	    (buffer[1] << 8) | buffer[0];
 }
 
 int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned and_mask,

drivers/media/video/cx88/cx88-video.c

@@ -1225,7 +1225,7 @@ static int video_do_ioctl(struct inode *inode, struct file *file,
 		struct v4l2_format *f = arg;
 		return cx8800_try_fmt(dev,fh,f);
 	}
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	/* --- streaming capture ------------------------------------- */
 	case VIDIOCGMBUF:
 	{
@@ -1584,7 +1584,7 @@ static int radio_do_ioctl(struct inode *inode, struct file *file,
 		*id = 0;
 		return 0;
 	}
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	case VIDIOCSTUNER:
 	{
 		struct video_tuner *v = arg;

drivers/media/video/msp3400-kthreads.c

@@ -961,10 +961,10 @@ int msp34xxg_thread(void *data)
 		/* setup the chip*/
 		msp34xxg_reset(client);
 		state->std = state->radio ? 0x40 : msp_standard;
-		if (state->std != 1)
-			goto unmute;
 		/* start autodetect */
 		msp_write_dem(client, 0x20, state->std);
+		if (state->std != 1)
+			goto unmute;
 
 		/* watch autodetect */
 		v4l_dbg(1, msp_debug, client, "started autodetect, waiting for result\n");

drivers/media/video/pwc/Kconfig

@@ -30,7 +30,7 @@ config USB_PWC
 
 config USB_PWC_DEBUG
 	bool "USB Philips Cameras verbose debug"
-	depends USB_PWC
+	depends on USB_PWC
 	help
 	  Say Y here in order to have the pwc driver generate verbose debugging
 	  messages.

drivers/media/video/pwc/pwc-if.c

@@ -160,6 +160,7 @@ static struct file_operations pwc_fops = {
 	.poll =		pwc_video_poll,
 	.mmap =		pwc_video_mmap,
 	.ioctl =        pwc_video_ioctl,
+	.compat_ioctl = v4l_compat_ioctl32,
 	.llseek =       no_llseek,
 };
 static struct video_device pwc_template = {

drivers/media/video/saa7134/saa7134-video.c

@@ -2087,7 +2087,7 @@ static int video_do_ioctl(struct inode *inode, struct file *file,
 		struct v4l2_format *f = arg;
 		return saa7134_try_fmt(dev,fh,f);
 	}
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	case VIDIOCGMBUF:
 	{
 		struct video_mbuf *mbuf = arg;

drivers/media/video/tuner-types.c

@@ -1027,10 +1027,11 @@ static struct tuner_params tuner_tnf_5335mf_params[] = {
 /* 70-79 */
 /* ------------ TUNER_SAMSUNG_TCPN_2121P30A - Samsung NTSC ------------ */
 
+/* '+ 4' turns on the Low Noise Amplifier */
 static struct tuner_range tuner_samsung_tcpn_2121p30a_ntsc_ranges[] = {
-	{ 16 * 130.00 /*MHz*/, 0xce, 0x01, },
-	{ 16 * 364.50 /*MHz*/, 0xce, 0x02, },
-	{ 16 * 999.99        , 0xce, 0x08, },
+	{ 16 * 130.00 /*MHz*/, 0xce, 0x01 + 4, },
+	{ 16 * 364.50 /*MHz*/, 0xce, 0x02 + 4, },
+	{ 16 * 999.99        , 0xce, 0x08 + 4, },
 };
 
 static struct tuner_params tuner_samsung_tcpn_2121p30a_params[] = {
@@ -1060,10 +1061,11 @@ static struct tuner_params tuner_thomson_fe6600_params[] = {
 
 /* ------------ TUNER_SAMSUNG_TCPG_6121P30A - Samsung PAL ------------ */
 
+/* '+ 4' turns on the Low Noise Amplifier */
 static struct tuner_range tuner_samsung_tcpg_6121p30a_pal_ranges[] = {
-	{ 16 * 146.25 /*MHz*/, 0xce, 0x01, },
-	{ 16 * 428.50 /*MHz*/, 0xce, 0x02, },
-	{ 16 * 999.99        , 0xce, 0x08, },
+	{ 16 * 146.25 /*MHz*/, 0xce, 0x01 + 4, },
+	{ 16 * 428.50 /*MHz*/, 0xce, 0x02 + 4, },
+	{ 16 * 999.99        , 0xce, 0x08 + 4, },
 };
 
 static struct tuner_params tuner_samsung_tcpg_6121p30a_params[] = {

drivers/media/video/v4l1-compat.c

@@ -599,6 +599,10 @@ v4l_compat_translate_ioctl(struct inode         *inode,
 			dprintk("VIDIOCGPICT / VIDIOC_G_FMT: %d\n",err);
 			break;
 		}
+
+		pict->depth   = ((fmt2->fmt.pix.bytesperline<<3)
+				 + (fmt2->fmt.pix.width-1) )
+				 /fmt2->fmt.pix.width;
 		pict->palette = pixelformat_to_palette(
 			fmt2->fmt.pix.pixelformat);
 		break;

drivers/media/video/v4l2-common.c

@@ -202,7 +202,7 @@ static char *v4l2_memory_names[] = {
 /* ------------------------------------------------------------------ */
 /* debug help functions                                               */
 
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 static const char *v4l1_ioctls[] = {
 	[_IOC_NR(VIDIOCGCAP)]       = "VIDIOCGCAP",
 	[_IOC_NR(VIDIOCGCHAN)]      = "VIDIOCGCHAN",
@@ -301,7 +301,7 @@ static const char *v4l2_ioctls[] = {
 #define V4L2_IOCTLS ARRAY_SIZE(v4l2_ioctls)
 
 static const char *v4l2_int_ioctls[] = {
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	[_IOC_NR(DECODER_GET_CAPABILITIES)]    = "DECODER_GET_CAPABILITIES",
 	[_IOC_NR(DECODER_GET_STATUS)]          = "DECODER_GET_STATUS",
 	[_IOC_NR(DECODER_SET_NORM)]            = "DECODER_SET_NORM",
@@ -367,7 +367,7 @@ void v4l_printk_ioctl(unsigned int cmd)
 		       (_IOC_NR(cmd) < V4L2_INT_IOCTLS) ?
 		       v4l2_int_ioctls[_IOC_NR(cmd)] : "UNKNOWN", dir, cmd);
 		break;
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	case 'v':
 		printk("v4l1 ioctl %s, dir=%s (0x%08x)\n",
 		       (_IOC_NR(cmd) < V4L1_IOCTLS) ?

drivers/media/video/videodev.c

@@ -760,7 +760,7 @@ static int __video_do_ioctl(struct inode *inode, struct file *file,
 		ret=vfd->vidioc_overlay(file, fh, *i);
 		break;
 	}
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	/* --- streaming capture ------------------------------------- */
 	case VIDIOCGMBUF:
 	{

drivers/media/video/vivi.c

@@ -986,7 +986,7 @@ static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *p)
 				file->f_flags & O_NONBLOCK));
 }
 
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 static int vidiocgmbuf (struct file *file, void *priv, struct video_mbuf *mbuf)
 {
 	struct vivi_fh  *fh=priv;
@@ -1328,7 +1328,7 @@ static struct video_device vivi = {
 	.vidioc_s_ctrl        = vidioc_s_ctrl,
 	.vidioc_streamon      = vidioc_streamon,
 	.vidioc_streamoff     = vidioc_streamoff,
-#ifdef CONFIG_V4L1_COMPAT
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	.vidiocgmbuf          = vidiocgmbuf,
 #endif
 	.tvnorms              = tvnorms,

drivers/mmc/mmc_queue.c

@@ -79,7 +79,8 @@ static int mmc_queue_thread(void *d)
 		spin_lock_irq(q->queue_lock);
 		set_current_state(TASK_INTERRUPTIBLE);
 		if (!blk_queue_plugged(q))
-			mq->req = req = elv_next_request(q);
+			req = elv_next_request(q);
+		mq->req = req;
 		spin_unlock_irq(q->queue_lock);
 
 		if (!req) {

drivers/mmc/wbsd.c

@@ -41,7 +41,7 @@
 #include "wbsd.h"
 
 #define DRIVER_NAME "wbsd"
-#define DRIVER_VERSION "1.5"
+#define DRIVER_VERSION "1.6"
 
 #define DBG(x...) \
 	pr_debug(DRIVER_NAME ": " x)
@@ -1439,13 +1439,13 @@ static int __devinit wbsd_scan(struct wbsd_host *host)
 
 static int __devinit wbsd_request_region(struct wbsd_host *host, int base)
 {
-	if (io & 0x7)
+	if (base & 0x7)
 		return -EINVAL;
 
 	if (!request_region(base, 8, DRIVER_NAME))
 		return -EIO;
 
-	host->base = io;
+	host->base = base;
 
 	return 0;
 }
@@ -1773,7 +1773,7 @@ static int __devinit wbsd_init(struct device *dev, int base, int irq, int dma,
 	/*
 	 * Request resources.
 	 */
-	ret = wbsd_request_resources(host, io, irq, dma);
+	ret = wbsd_request_resources(host, base, irq, dma);
 	if (ret) {
 		wbsd_release_resources(host);
 		wbsd_free_mmc(dev);
@@ -1861,6 +1861,7 @@ static void __devexit wbsd_shutdown(struct device *dev, int pnp)
 
 static int __devinit wbsd_probe(struct platform_device *dev)
 {
+	/* Use the module parameters for resources */
 	return wbsd_init(&dev->dev, io, irq, dma, 0);
 }
 

drivers/net/bnx2.c

@@ -56,8 +56,8 @@
 
 #define DRV_MODULE_NAME		"bnx2"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"1.4.43"
-#define DRV_MODULE_RELDATE	"June 28, 2006"
+#define DRV_MODULE_VERSION	"1.4.44"
+#define DRV_MODULE_RELDATE	"August 10, 2006"
 
 #define RUN_AT(x) (jiffies + (x))
 
@@ -209,8 +209,10 @@ MODULE_DEVICE_TABLE(pci, bnx2_pci_tbl);
 
 static inline u32 bnx2_tx_avail(struct bnx2 *bp)
 {
-	u32 diff = TX_RING_IDX(bp->tx_prod) - TX_RING_IDX(bp->tx_cons);
+	u32 diff;
 
+	smp_mb();
+	diff = TX_RING_IDX(bp->tx_prod) - TX_RING_IDX(bp->tx_cons);
 	if (diff > MAX_TX_DESC_CNT)
 		diff = (diff & MAX_TX_DESC_CNT) - 1;
 	return (bp->tx_ring_size - diff);
@@ -1569,7 +1571,7 @@ bnx2_alloc_rx_skb(struct bnx2 *bp, u16 index)
 	struct rx_bd *rxbd = &bp->rx_desc_ring[RX_RING(index)][RX_IDX(index)];
 	unsigned long align;
 
-	skb = dev_alloc_skb(bp->rx_buf_size);
+	skb = netdev_alloc_skb(bp->dev, bp->rx_buf_size);
 	if (skb == NULL) {
 		return -ENOMEM;
 	}
@@ -1578,7 +1580,6 @@ bnx2_alloc_rx_skb(struct bnx2 *bp, u16 index)
 		skb_reserve(skb, 8 - align);
 	}
 
-	skb->dev = bp->dev;
 	mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_use_size,
 		PCI_DMA_FROMDEVICE);
 
@@ -1686,15 +1687,20 @@ bnx2_tx_int(struct bnx2 *bp)
 	}
 
 	bp->tx_cons = sw_cons;
+	/* Need to make the tx_cons update visible to bnx2_start_xmit()
+	 * before checking for netif_queue_stopped().  Without the
+	 * memory barrier, there is a small possibility that bnx2_start_xmit()
+	 * will miss it and cause the queue to be stopped forever.
+	 */
+	smp_mb();
 
-	if (unlikely(netif_queue_stopped(bp->dev))) {
-		spin_lock(&bp->tx_lock);
+	if (unlikely(netif_queue_stopped(bp->dev)) &&
+		     (bnx2_tx_avail(bp) > bp->tx_wake_thresh)) {
+		netif_tx_lock(bp->dev);
 		if ((netif_queue_stopped(bp->dev)) &&
-		    (bnx2_tx_avail(bp) > MAX_SKB_FRAGS)) {
-
+		    (bnx2_tx_avail(bp) > bp->tx_wake_thresh))
 			netif_wake_queue(bp->dev);
-		}
-		spin_unlock(&bp->tx_lock);
+		netif_tx_unlock(bp->dev);
 	}
 }
 
@@ -1786,7 +1792,7 @@ bnx2_rx_int(struct bnx2 *bp, int budget)
 		if ((bp->dev->mtu > 1500) && (len <= RX_COPY_THRESH)) {
 			struct sk_buff *new_skb;
 
-			new_skb = dev_alloc_skb(len + 2);
+			new_skb = netdev_alloc_skb(bp->dev, len + 2);
 			if (new_skb == NULL)
 				goto reuse_rx;
 
@@ -1797,7 +1803,6 @@ bnx2_rx_int(struct bnx2 *bp, int budget)
 
 			skb_reserve(new_skb, 2);
 			skb_put(new_skb, len);
-			new_skb->dev = bp->dev;
 
 			bnx2_reuse_rx_skb(bp, skb,
 				sw_ring_cons, sw_ring_prod);
@@ -3503,6 +3508,8 @@ bnx2_init_tx_ring(struct bnx2 *bp)
 	struct tx_bd *txbd;
 	u32 val;
 
+	bp->tx_wake_thresh = bp->tx_ring_size / 2;
+
 	txbd = &bp->tx_desc_ring[MAX_TX_DESC_CNT];
 		
 	txbd->tx_bd_haddr_hi = (u64) bp->tx_desc_mapping >> 32;
@@ -3952,7 +3959,7 @@ bnx2_run_loopback(struct bnx2 *bp, int loopback_mode)
 		return -EINVAL;
 
 	pkt_size = 1514;
-	skb = dev_alloc_skb(pkt_size);
+	skb = netdev_alloc_skb(bp->dev, pkt_size);
 	if (!skb)
 		return -ENOMEM;
 	packet = skb_put(skb, pkt_size);
@@ -4390,10 +4397,8 @@ bnx2_vlan_rx_kill_vid(struct net_device *dev, uint16_t vid)
 #endif
 
 /* Called with netif_tx_lock.
- * hard_start_xmit is pseudo-lockless - a lock is only required when
- * the tx queue is full. This way, we get the benefit of lockless
- * operations most of the time without the complexities to handle
- * netif_stop_queue/wake_queue race conditions.
+ * bnx2_tx_int() runs without netif_tx_lock unless it needs to call
+ * netif_wake_queue().
  */
 static int
 bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
@@ -4512,12 +4517,9 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	dev->trans_start = jiffies;
 
 	if (unlikely(bnx2_tx_avail(bp) <= MAX_SKB_FRAGS)) {
-		spin_lock(&bp->tx_lock);
 		netif_stop_queue(dev);
-		
-		if (bnx2_tx_avail(bp) > MAX_SKB_FRAGS)
+		if (bnx2_tx_avail(bp) > bp->tx_wake_thresh)
 			netif_wake_queue(dev);
-		spin_unlock(&bp->tx_lock);
 	}
 
 	return NETDEV_TX_OK;
@@ -5628,7 +5630,6 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 	bp->pdev = pdev;
 
 	spin_lock_init(&bp->phy_lock);
-	spin_lock_init(&bp->tx_lock);
 	INIT_WORK(&bp->reset_task, bnx2_reset_task, bp);
 
 	dev->base_addr = dev->mem_start = pci_resource_start(pdev, 0);
@@ -5751,7 +5752,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 	bp->mac_addr[5] = (u8) reg;
 
 	bp->tx_ring_size = MAX_TX_DESC_CNT;
-	bnx2_set_rx_ring_size(bp, 100);
+	bnx2_set_rx_ring_size(bp, 255);
 
 	bp->rx_csum = 1;
 

drivers/net/bnx2.h

@@ -3890,10 +3890,6 @@ struct bnx2 {
 	u32		tx_prod_bseq __attribute__((aligned(L1_CACHE_BYTES)));
 	u16		tx_prod;
 
-	struct tx_bd	*tx_desc_ring;
-	struct sw_bd	*tx_buf_ring;
-	int		tx_ring_size;
-
 	u16		tx_cons __attribute__((aligned(L1_CACHE_BYTES)));
 	u16		hw_tx_cons;
 
@@ -3916,9 +3912,11 @@ struct bnx2 {
 	struct sw_bd		*rx_buf_ring;
 	struct rx_bd		*rx_desc_ring[MAX_RX_RINGS];
 
-	/* Only used to synchronize netif_stop_queue/wake_queue when tx */
-	/* ring is full */
-	spinlock_t		tx_lock;
+	/* TX constants */
+	struct tx_bd	*tx_desc_ring;
+	struct sw_bd	*tx_buf_ring;
+	int		tx_ring_size;
+	u32		tx_wake_thresh;
 
 	/* End of fields used in the performance code paths. */
 

drivers/net/ppp_generic.c

@@ -192,7 +192,7 @@ struct cardmap {
 	void *ptr[CARDMAP_WIDTH];
 };
 static void *cardmap_get(struct cardmap *map, unsigned int nr);
-static void cardmap_set(struct cardmap **map, unsigned int nr, void *ptr);
+static int cardmap_set(struct cardmap **map, unsigned int nr, void *ptr);
 static unsigned int cardmap_find_first_free(struct cardmap *map);
 static void cardmap_destroy(struct cardmap **map);
 
@@ -1995,10 +1995,9 @@ ppp_register_channel(struct ppp_channel *chan)
 {
 	struct channel *pch;
 
-	pch = kmalloc(sizeof(struct channel), GFP_KERNEL);
+	pch = kzalloc(sizeof(struct channel), GFP_KERNEL);
 	if (pch == 0)
 		return -ENOMEM;
-	memset(pch, 0, sizeof(struct channel));
 	pch->ppp = NULL;
 	pch->chan = chan;
 	chan->ppp = pch;
@@ -2408,13 +2407,12 @@ ppp_create_interface(int unit, int *retp)
 	int ret = -ENOMEM;
 	int i;
 
-	ppp = kmalloc(sizeof(struct ppp), GFP_KERNEL);
+	ppp = kzalloc(sizeof(struct ppp), GFP_KERNEL);
 	if (!ppp)
 		goto out;
 	dev = alloc_netdev(0, "", ppp_setup);
 	if (!dev)
 		goto out1;
-	memset(ppp, 0, sizeof(struct ppp));
 
 	ppp->mru = PPP_MRU;
 	init_ppp_file(&ppp->file, INTERFACE);
@@ -2454,11 +2452,16 @@ ppp_create_interface(int unit, int *retp)
 	}
 
 	atomic_inc(&ppp_unit_count);
-	cardmap_set(&all_ppp_units, unit, ppp);
+	ret = cardmap_set(&all_ppp_units, unit, ppp);
+	if (ret != 0)
+		goto out3;
+
 	mutex_unlock(&all_ppp_mutex);
 	*retp = 0;
 	return ppp;
 
+out3:
+	atomic_dec(&ppp_unit_count);
 out2:
 	mutex_unlock(&all_ppp_mutex);
 	free_netdev(dev);
@@ -2695,7 +2698,7 @@ static void *cardmap_get(struct cardmap *map, unsigned int nr)
 	return NULL;
 }
 
-static void cardmap_set(struct cardmap **pmap, unsigned int nr, void *ptr)
+static int cardmap_set(struct cardmap **pmap, unsigned int nr, void *ptr)
 {
 	struct cardmap *p;
 	int i;
@@ -2704,8 +2707,9 @@ static void cardmap_set(struct cardmap **pmap, unsigned int nr, void *ptr)
 	if (p == NULL || (nr >> p->shift) >= CARDMAP_WIDTH) {
 		do {
 			/* need a new top level */
-			struct cardmap *np = kmalloc(sizeof(*np), GFP_KERNEL);
-			memset(np, 0, sizeof(*np));
+			struct cardmap *np = kzalloc(sizeof(*np), GFP_KERNEL);
+			if (!np)
+				goto enomem;
 			np->ptr[0] = p;
 			if (p != NULL) {
 				np->shift = p->shift + CARDMAP_ORDER;
@@ -2719,8 +2723,9 @@ static void cardmap_set(struct cardmap **pmap, unsigned int nr, void *ptr)
 	while (p->shift > 0) {
 		i = (nr >> p->shift) & CARDMAP_MASK;
 		if (p->ptr[i] == NULL) {
-			struct cardmap *np = kmalloc(sizeof(*np), GFP_KERNEL);
-			memset(np, 0, sizeof(*np));
+			struct cardmap *np = kzalloc(sizeof(*np), GFP_KERNEL);
+			if (!np)
+				goto enomem;
 			np->shift = p->shift - CARDMAP_ORDER;
 			np->parent = p;
 			p->ptr[i] = np;
@@ -2735,6 +2740,9 @@ static void cardmap_set(struct cardmap **pmap, unsigned int nr, void *ptr)
 		set_bit(i, &p->inuse);
 	else
 		clear_bit(i, &p->inuse);
+	return 0;
+ enomem:
+	return -ENOMEM;
 }
 
 static unsigned int cardmap_find_first_free(struct cardmap *map)

drivers/net/tg3.c

@@ -68,8 +68,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.64"
-#define DRV_MODULE_RELDATE	"July 31, 2006"
+#define DRV_MODULE_VERSION	"3.65"
+#define DRV_MODULE_RELDATE	"August 07, 2006"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -123,9 +123,6 @@
 			           TG3_RX_RCB_RING_SIZE(tp))
 #define TG3_TX_RING_BYTES	(sizeof(struct tg3_tx_buffer_desc) * \
 				 TG3_TX_RING_SIZE)
-#define TX_BUFFS_AVAIL(TP)						\
-	((TP)->tx_pending -						\
-	 (((TP)->tx_prod - (TP)->tx_cons) & (TG3_TX_RING_SIZE - 1)))
 #define NEXT_TX(N)		(((N) + 1) & (TG3_TX_RING_SIZE - 1))
 
 #define RX_PKT_BUF_SZ		(1536 + tp->rx_offset + 64)
@@ -2987,6 +2984,13 @@ static void tg3_tx_recover(struct tg3 *tp)
 	spin_unlock(&tp->lock);
 }
 
+static inline u32 tg3_tx_avail(struct tg3 *tp)
+{
+	smp_mb();
+	return (tp->tx_pending -
+		((tp->tx_prod - tp->tx_cons) & (TG3_TX_RING_SIZE - 1)));
+}
+
 /* Tigon3 never reports partial packet sends.  So we do not
  * need special logic to handle SKBs that have not had all
  * of their frags sent yet, like SunGEM does.
@@ -3038,12 +3042,20 @@ static void tg3_tx(struct tg3 *tp)
 
 	tp->tx_cons = sw_idx;
 
-	if (unlikely(netif_queue_stopped(tp->dev))) {
-		spin_lock(&tp->tx_lock);
+	/* Need to make the tx_cons update visible to tg3_start_xmit()
+	 * before checking for netif_queue_stopped().  Without the
+	 * memory barrier, there is a small possibility that tg3_start_xmit()
+	 * will miss it and cause the queue to be stopped forever.
+	 */
+	smp_mb();
+
+	if (unlikely(netif_queue_stopped(tp->dev) &&
+		     (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH))) {
+		netif_tx_lock(tp->dev);
 		if (netif_queue_stopped(tp->dev) &&
-		    (TX_BUFFS_AVAIL(tp) > TG3_TX_WAKEUP_THRESH))
+		    (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH))
 			netif_wake_queue(tp->dev);
-		spin_unlock(&tp->tx_lock);
+		netif_tx_unlock(tp->dev);
 	}
 }
 
@@ -3101,7 +3113,6 @@ static int tg3_alloc_rx_skb(struct tg3 *tp, u32 opaque_key,
 	if (skb == NULL)
 		return -ENOMEM;
 
-	skb->dev = tp->dev;
 	skb_reserve(skb, tp->rx_offset);
 
 	mapping = pci_map_single(tp->pdev, skb->data,
@@ -3274,7 +3285,6 @@ static int tg3_rx(struct tg3 *tp, int budget)
 			if (copy_skb == NULL)
 				goto drop_it_no_recycle;
 
-			copy_skb->dev = tp->dev;
 			skb_reserve(copy_skb, 2);
 			skb_put(copy_skb, len);
 			pci_dma_sync_single_for_cpu(tp->pdev, dma_addr, len, PCI_DMA_FROMDEVICE);
@@ -3797,7 +3807,7 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	 * interrupt.  Furthermore, IRQ processing runs lockless so we have
 	 * no IRQ context deadlocks to worry about either.  Rejoice!
 	 */
-	if (unlikely(TX_BUFFS_AVAIL(tp) <= (skb_shinfo(skb)->nr_frags + 1))) {
+	if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->nr_frags + 1))) {
 		if (!netif_queue_stopped(dev)) {
 			netif_stop_queue(dev);
 
@@ -3893,12 +3903,10 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	tw32_tx_mbox((MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW), entry);
 
 	tp->tx_prod = entry;
-	if (unlikely(TX_BUFFS_AVAIL(tp) <= (MAX_SKB_FRAGS + 1))) {
-		spin_lock(&tp->tx_lock);
+	if (unlikely(tg3_tx_avail(tp) <= (MAX_SKB_FRAGS + 1))) {
 		netif_stop_queue(dev);
-		if (TX_BUFFS_AVAIL(tp) > TG3_TX_WAKEUP_THRESH)
+		if (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH)
 			netif_wake_queue(tp->dev);
-		spin_unlock(&tp->tx_lock);
 	}
 
 out_unlock:
@@ -3920,7 +3928,7 @@ static int tg3_tso_bug(struct tg3 *tp, struct sk_buff *skb)
 	struct sk_buff *segs, *nskb;
 
 	/* Estimate the number of fragments in the worst case */
-	if (unlikely(TX_BUFFS_AVAIL(tp) <= (skb_shinfo(skb)->gso_segs * 3))) {
+	if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->gso_segs * 3))) {
 		netif_stop_queue(tp->dev);
 		return NETDEV_TX_BUSY;
 	}
@@ -3960,7 +3968,7 @@ static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev)
 	 * interrupt.  Furthermore, IRQ processing runs lockless so we have
 	 * no IRQ context deadlocks to worry about either.  Rejoice!
 	 */
-	if (unlikely(TX_BUFFS_AVAIL(tp) <= (skb_shinfo(skb)->nr_frags + 1))) {
+	if (unlikely(tg3_tx_avail(tp) <= (skb_shinfo(skb)->nr_frags + 1))) {
 		if (!netif_queue_stopped(dev)) {
 			netif_stop_queue(dev);
 
@@ -4110,12 +4118,10 @@ static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev)
 	tw32_tx_mbox((MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW), entry);
 
 	tp->tx_prod = entry;
-	if (unlikely(TX_BUFFS_AVAIL(tp) <= (MAX_SKB_FRAGS + 1))) {
-		spin_lock(&tp->tx_lock);
+	if (unlikely(tg3_tx_avail(tp) <= (MAX_SKB_FRAGS + 1))) {
 		netif_stop_queue(dev);
-		if (TX_BUFFS_AVAIL(tp) > TG3_TX_WAKEUP_THRESH)
+		if (tg3_tx_avail(tp) > TG3_TX_WAKEUP_THRESH)
 			netif_wake_queue(tp->dev);
-		spin_unlock(&tp->tx_lock);
 	}
 
 out_unlock:
@@ -11474,7 +11480,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 	tp->grc_mode |= GRC_MODE_BSWAP_NONFRM_DATA;
 #endif
 	spin_lock_init(&tp->lock);
-	spin_lock_init(&tp->tx_lock);
 	spin_lock_init(&tp->indirect_lock);
 	INIT_WORK(&tp->reset_task, tg3_reset_task, tp);
 

drivers/net/tg3.h

@@ -2079,9 +2079,9 @@ struct tg3 {
 	 * lock: Held during reset, PHY access, timer, and when
 	 *       updating tg3_flags and tg3_flags2.
 	 *
-	 * tx_lock: Held during tg3_start_xmit and tg3_tx only
-	 *          when calling netif_[start|stop]_queue.
-	 *          tg3_start_xmit is protected by netif_tx_lock.
+	 * netif_tx_lock: Held during tg3_start_xmit. tg3_tx holds
+	 *                netif_tx_lock when it needs to call
+	 *                netif_wake_queue.
 	 *
 	 * Both of these locks are to be held with BH safety.
 	 *
@@ -2118,8 +2118,6 @@ struct tg3 {
 	u32				tx_cons;
 	u32				tx_pending;
 
-	spinlock_t			tx_lock;
-
 	struct tg3_tx_buffer_desc	*tx_ring;
 	struct tx_ring_info		*tx_buffers;
 	dma_addr_t			tx_desc_mapping;

drivers/pci/hotplug/Kconfig

@@ -153,13 +153,6 @@ config HOTPLUG_PCI_SHPC_POLL_EVENT_MODE
 
 	  When in doubt, say N.
 
-config HOTPLUG_PCI_SHPC_PHPRM_LEGACY
-	bool "For AMD SHPC only: Use $HRT for resource/configuration"
-	depends on HOTPLUG_PCI_SHPC && !ACPI 
-	help
-	  Say Y here for AMD SHPC. You have to select this option if you are 
-	  using this driver on platform with AMD SHPC.
-
 config HOTPLUG_PCI_RPA
 	tristate "RPA PCI Hotplug driver"
 	depends on HOTPLUG_PCI && PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE

drivers/pci/hotplug/pciehp.h

@@ -279,6 +279,11 @@ struct hpc_ops {
 
 
 #ifdef CONFIG_ACPI
+#include <acpi/acpi.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/actypes.h>
+#include <linux/pci-acpi.h>
+
 #define pciehp_get_hp_hw_control_from_firmware(dev) \
 	pciehp_acpi_get_hp_hw_control_from_firmware(dev)
 static inline int pciehp_get_hp_params_from_firmware(struct pci_dev *dev,

drivers/pci/hotplug/pciehp_hpc.c

@@ -38,10 +38,6 @@
 
 #include "../pci.h"
 #include "pciehp.h"
-#include <acpi/acpi.h>
-#include <acpi/acpi_bus.h>
-#include <acpi/actypes.h>
-#include <linux/pci-acpi.h>
 #ifdef DEBUG
 #define DBG_K_TRACE_ENTRY      ((unsigned int)0x00000001)	/* On function entry */
 #define DBG_K_TRACE_EXIT       ((unsigned int)0x00000002)	/* On function exit */

drivers/s390/block/dasd.c

@@ -1730,8 +1730,8 @@ dasd_flush_request_queue(struct dasd_device * device)
 		req = elv_next_request(device->request_queue);
 		if (req == NULL)
 			break;
-		dasd_end_request(req, 0);
 		blkdev_dequeue_request(req);
+		dasd_end_request(req, 0);
 	}
 	spin_unlock_irq(&device->request_queue_lock);
 }

drivers/s390/block/dasd_devmap.c

@@ -48,18 +48,20 @@ struct dasd_devmap {
 };
 
 /*
- * dasd_servermap is used to store the server_id of all storage servers
- * accessed by DASD device driver.
+ * dasd_server_ssid_map contains a globally unique storage server subsystem ID.
+ * dasd_server_ssid_list contains the list of all subsystem IDs accessed by
+ * the DASD device driver.
  */
-struct dasd_servermap {
+struct dasd_server_ssid_map {
 	struct list_head list;
 	struct server_id {
 		char vendor[4];
 		char serial[15];
 	} sid;
+	__u16 ssid;
 };
 
-static struct list_head dasd_serverlist;
+static struct list_head dasd_server_ssid_list;
 
 /*
  * Parameter parsing functions for dasd= parameter. The syntax is:
@@ -89,7 +91,7 @@ static char *dasd[256];
 module_param_array(dasd, charp, NULL, 0);
 
 /*
- * Single spinlock to protect devmap structures and lists.
+ * Single spinlock to protect devmap and servermap structures and lists.
  */
 static DEFINE_SPINLOCK(dasd_devmap_lock);
 
@@ -264,8 +266,9 @@ dasd_parse_keyword( char *parsestring ) {
 		if (dasd_page_cache)
 			return residual_str;
 		dasd_page_cache =
-			kmem_cache_create("dasd_page_cache", PAGE_SIZE, 0,
-					  SLAB_CACHE_DMA, NULL, NULL );
+			kmem_cache_create("dasd_page_cache", PAGE_SIZE,
+					  PAGE_SIZE, SLAB_CACHE_DMA,
+					  NULL, NULL );
 		if (!dasd_page_cache)
 			MESSAGE(KERN_WARNING, "%s", "Failed to create slab, "
 				"fixed buffer mode disabled.");
@@ -858,39 +861,6 @@ static struct attribute_group dasd_attr_group = {
 	.attrs = dasd_attrs,
 };
 
-/*
- * Check if the related storage server is already contained in the
- * dasd_serverlist. If server is not contained, create new entry.
- * Return 0 if server was already in serverlist,
- *	  1 if the server was added successfully
- *	 <0 in case of error.
- */
-static int
-dasd_add_server(struct dasd_uid *uid)
-{
-	struct dasd_servermap *new, *tmp;
-
-	/* check if server is already contained */
-	list_for_each_entry(tmp, &dasd_serverlist, list)
-	  // normale cmp?
-		if (strncmp(tmp->sid.vendor, uid->vendor,
-			    sizeof(tmp->sid.vendor)) == 0
-		    && strncmp(tmp->sid.serial, uid->serial,
-			       sizeof(tmp->sid.serial)) == 0)
-			return 0;
-
-	new = (struct dasd_servermap *)
-		kzalloc(sizeof(struct dasd_servermap), GFP_KERNEL);
-	if (!new)
-		return -ENOMEM;
-
-	strncpy(new->sid.vendor, uid->vendor, sizeof(new->sid.vendor));
-	strncpy(new->sid.serial, uid->serial, sizeof(new->sid.serial));
-	list_add(&new->list, &dasd_serverlist);
-	return 1;
-}
-
-
 /*
  * Return copy of the device unique identifier.
  */
@@ -910,6 +880,9 @@ dasd_get_uid(struct ccw_device *cdev, struct dasd_uid *uid)
 
 /*
  * Register the given device unique identifier into devmap struct.
+ * In addition check if the related storage server subsystem ID is already
+ * contained in the dasd_server_ssid_list. If subsystem ID is not contained,
+ * create new entry.
  * Return 0 if server was already in serverlist,
  *	  1 if the server was added successful
  *	 <0 in case of error.
@@ -918,16 +891,39 @@ int
 dasd_set_uid(struct ccw_device *cdev, struct dasd_uid *uid)
 {
 	struct dasd_devmap *devmap;
-	int rc;
+	struct dasd_server_ssid_map *srv, *tmp;
 
 	devmap = dasd_find_busid(cdev->dev.bus_id);
 	if (IS_ERR(devmap))
 		return PTR_ERR(devmap);
+
+	/* generate entry for server_ssid_map */
+	srv = (struct dasd_server_ssid_map *)
+		kzalloc(sizeof(struct dasd_server_ssid_map), GFP_KERNEL);
+	if (!srv)
+		return -ENOMEM;
+	strncpy(srv->sid.vendor, uid->vendor, sizeof(srv->sid.vendor) - 1);
+	strncpy(srv->sid.serial, uid->serial, sizeof(srv->sid.serial) - 1);
+	srv->ssid = uid->ssid;
+
+	/* server is already contained ? */
 	spin_lock(&dasd_devmap_lock);
 	devmap->uid = *uid;
-	rc = dasd_add_server(uid);
+	list_for_each_entry(tmp, &dasd_server_ssid_list, list) {
+		if (!memcmp(&srv->sid, &tmp->sid,
+			    sizeof(struct dasd_server_ssid_map))) {
+			kfree(srv);
+			srv = NULL;
+			break;
+		}
+	}
+
+	/* add servermap to serverlist */
+	if (srv)
+		list_add(&srv->list, &dasd_server_ssid_list);
 	spin_unlock(&dasd_devmap_lock);
-	return rc;
+
+	return (srv ? 1 : 0);
 }
 EXPORT_SYMBOL_GPL(dasd_set_uid);
 
@@ -995,7 +991,7 @@ dasd_devmap_init(void)
 		INIT_LIST_HEAD(&dasd_hashlists[i]);
 
 	/* Initialize servermap structure. */
-	INIT_LIST_HEAD(&dasd_serverlist);
+	INIT_LIST_HEAD(&dasd_server_ssid_list);
 	return 0;
 }
 

drivers/s390/block/dasd_eckd.c

@@ -468,11 +468,11 @@ dasd_eckd_generate_uid(struct dasd_device *device, struct dasd_uid *uid)
 		return -ENODEV;
 
 	memset(uid, 0, sizeof(struct dasd_uid));
-	strncpy(uid->vendor, confdata->ned1.HDA_manufacturer,
-		sizeof(uid->vendor) - 1);
+	memcpy(uid->vendor, confdata->ned1.HDA_manufacturer,
+	       sizeof(uid->vendor) - 1);
 	EBCASC(uid->vendor, sizeof(uid->vendor) - 1);
-	strncpy(uid->serial, confdata->ned1.HDA_location,
-		sizeof(uid->serial) - 1);
+	memcpy(uid->serial, confdata->ned1.HDA_location,
+	       sizeof(uid->serial) - 1);
 	EBCASC(uid->serial, sizeof(uid->serial) - 1);
 	uid->ssid = confdata->neq.subsystemID;
 	if (confdata->ned2.sneq.flags == 0x40) {

drivers/s390/block/xpram.c

@@ -48,15 +48,6 @@
 #define PRINT_ERR(x...)		printk(KERN_ERR XPRAM_NAME " error:" x)
 
 
-static struct sysdev_class xpram_sysclass = {
-	set_kset_name("xpram"),
-};
-
-static struct sys_device xpram_sys_device = {
-	.id	= 0,
-	.cls	= &xpram_sysclass,
-}; 
-
 typedef struct {
 	unsigned int	size;		/* size of xpram segment in pages */
 	unsigned int	offset;		/* start page of xpram segment */
@@ -451,8 +442,6 @@ static void __exit xpram_exit(void)
 	}
 	unregister_blkdev(XPRAM_MAJOR, XPRAM_NAME);
 	blk_cleanup_queue(xpram_queue);
-	sysdev_unregister(&xpram_sys_device);
-	sysdev_class_unregister(&xpram_sysclass);
 }
 
 static int __init xpram_init(void)
@@ -470,19 +459,7 @@ static int __init xpram_init(void)
 	rc = xpram_setup_sizes(xpram_pages);
 	if (rc)
 		return rc;
-	rc = sysdev_class_register(&xpram_sysclass);
-	if (rc)
-		return rc;
-
-	rc = sysdev_register(&xpram_sys_device);
-	if (rc) {
-		sysdev_class_unregister(&xpram_sysclass);
-		return rc;
-	}
-	rc = xpram_setup_blkdev();
-	if (rc)
-		sysdev_unregister(&xpram_sys_device);
-	return rc;
+	return xpram_setup_blkdev();
 }
 
 module_init(xpram_init);

drivers/s390/char/tape_class.c

@@ -76,7 +76,7 @@ struct tape_class_device *register_tape_dev(
 				device,
 				"%s", tcd->device_name
 			);
-	rc = PTR_ERR(tcd->class_device);
+	rc = IS_ERR(tcd->class_device) ? PTR_ERR(tcd->class_device) : 0;
 	if (rc)
 		goto fail_with_cdev;
 	rc = sysfs_create_link(

drivers/s390/cio/device_fsm.c

@@ -772,6 +772,7 @@ ccw_device_online_verify(struct ccw_device *cdev, enum dev_event dev_event)
 	stsch(sch->schid, &sch->schib);
 
 	if (sch->schib.scsw.actl != 0 ||
+	    (sch->schib.scsw.stctl & SCSW_STCTL_STATUS_PEND) ||
 	    (cdev->private->irb.scsw.stctl & SCSW_STCTL_STATUS_PEND)) {
 		/*
 		 * No final status yet or final status not yet delivered

drivers/s390/cio/device_ops.c

@@ -263,6 +263,9 @@ ccw_device_wake_up(struct ccw_device *cdev, unsigned long ip, struct irb *irb)
 	/* Abuse intparm for error reporting. */
 	if (IS_ERR(irb))
 		cdev->private->intparm = -EIO;
+	else if (irb->scsw.cc == 1)
+		/* Retry for deferred condition code. */
+		cdev->private->intparm = -EAGAIN;
 	else if ((irb->scsw.dstat !=
 		  (DEV_STAT_CHN_END|DEV_STAT_DEV_END)) ||
 		 (irb->scsw.cstat != 0)) {

drivers/scsi/arm/Kconfig

@@ -69,6 +69,7 @@ comment "The following drivers are not fully supported"
 config SCSI_CUMANA_1
 	tristate "CumanaSCSI I support (EXPERIMENTAL)"
 	depends on ARCH_ACORN && EXPERIMENTAL && SCSI
+	select SCSI_SPI_ATTRS
 	help
 	  This enables support for the Cumana SCSI I card. If you have an
 	  Acorn system with one of these, say Y. If unsure, say N.
@@ -76,6 +77,7 @@ config SCSI_CUMANA_1
 config SCSI_ECOSCSI
 	tristate "EcoScsi support (EXPERIMENTAL)"
 	depends on ARCH_ACORN && EXPERIMENTAL && (ARCH_ARC || ARCH_A5K) && SCSI
+	select SCSI_SPI_ATTRS
 	help
 	  This enables support for the EcoSCSI card -- a small card that sits
 	  in the Econet socket. If you have an Acorn system with one of these,
@@ -84,6 +86,7 @@ config SCSI_ECOSCSI
 config SCSI_OAK1
 	tristate "Oak SCSI support (EXPERIMENTAL)"
 	depends on ARCH_ACORN && EXPERIMENTAL && SCSI
+	select SCSI_SPI_ATTRS
 	help
 	  This enables support for the Oak SCSI card. If you have an Acorn
 	  system with one of these, say Y. If unsure, say N.

drivers/scsi/arm/scsi.h

@@ -74,7 +74,7 @@ static inline void init_SCp(Scsi_Cmnd *SCpnt)
 		unsigned long len = 0;
 		int buf;
 
-		SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->buffer;
+		SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->request_buffer;
 		SCpnt->SCp.buffers_residual = SCpnt->use_sg - 1;
 		SCpnt->SCp.ptr = (char *)
 			 (page_address(SCpnt->SCp.buffer->page) +

drivers/scsi/ata_piix.c

@@ -567,8 +567,8 @@ static int piix_sata_prereset(struct ata_port *ap)
 			present = 1;
 	}
 
-	DPRINTK("ata%u: LEAVE, pcs=0x%x present_mask=0x%x\n",
-		ap->id, pcs, present_mask);
+	DPRINTK("ata%u: LEAVE, pcs=0x%x present=0x%x\n",
+		ap->id, pcs, present);
 
 	if (!present) {
 		ata_port_printk(ap, KERN_INFO, "SATA port has no device.\n");
@@ -828,6 +828,7 @@ static void __devinit piix_init_sata_map(struct pci_dev *pdev,
 		case IDE:
 			WARN_ON((i & 1) || map[i + 1] != IDE);
 			pinfo[i / 2] = piix_port_info[ich5_pata];
+			pinfo[i / 2].private_data = hpriv;
 			i++;
 			printk(" IDE IDE");
 			break;

drivers/scsi/libata-core.c

@@ -5185,28 +5185,6 @@ void ata_host_stop (struct ata_host_set *host_set)
 		iounmap(host_set->mmio_base);
 }
 
-
-/**
- *	ata_host_remove - Unregister SCSI host structure with upper layers
- *	@ap: Port to unregister
- *	@do_unregister: 1 if we fully unregister, 0 to just stop the port
- *
- *	LOCKING:
- *	Inherited from caller.
- */
-
-static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister)
-{
-	struct Scsi_Host *sh = ap->host;
-
-	DPRINTK("ENTER\n");
-
-	if (do_unregister)
-		scsi_remove_host(sh);
-
-	ap->ops->port_stop(ap);
-}
-
 /**
  *	ata_dev_init - Initialize an ata_device structure
  *	@dev: Device structure to initialize
@@ -5532,8 +5510,11 @@ int ata_device_add(const struct ata_probe_ent *ent)
 
 err_out:
 	for (i = 0; i < count; i++) {
-		ata_host_remove(host_set->ports[i], 1);
-		scsi_host_put(host_set->ports[i]->host);
+		struct ata_port *ap = host_set->ports[i];
+		if (ap) {
+			ap->ops->port_stop(ap);
+			scsi_host_put(ap->host);
+		}
 	}
 err_free_ret:
 	kfree(host_set);
@@ -5558,7 +5539,7 @@ void ata_port_detach(struct ata_port *ap)
 	int i;
 
 	if (!ap->ops->error_handler)
-		return;
+		goto skip_eh;
 
 	/* tell EH we're leaving & flush EH */
 	spin_lock_irqsave(ap->lock, flags);
@@ -5594,6 +5575,7 @@ void ata_port_detach(struct ata_port *ap)
 	cancel_delayed_work(&ap->hotplug_task);
 	flush_workqueue(ata_aux_wq);
 
+ skip_eh:
 	/* remove the associated SCSI host */
 	scsi_remove_host(ap->host);
 }
@@ -5662,7 +5644,7 @@ int ata_scsi_release(struct Scsi_Host *host)
 	DPRINTK("ENTER\n");
 
 	ap->ops->port_disable(ap);
-	ata_host_remove(ap, 0);
+	ap->ops->port_stop(ap);
 
 	DPRINTK("EXIT\n");
 	return 1;

drivers/scsi/libata-scsi.c

@@ -2353,6 +2353,19 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc)
 			ata_gen_ata_desc_sense(qc);
 		}
 
+		/* SCSI EH automatically locks door if sdev->locked is
+		 * set.  Sometimes door lock request continues to
+		 * fail, for example, when no media is present.  This
+		 * creates a loop - SCSI EH issues door lock which
+		 * fails and gets invoked again to acquire sense data
+		 * for the failed command.
+		 *
+		 * If door lock fails, always clear sdev->locked to
+		 * avoid this infinite loop.
+		 */
+		if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL)
+			qc->dev->sdev->locked = 0;
+
 		qc->scsicmd->result = SAM_STAT_CHECK_CONDITION;
 		qc->scsidone(cmd);
 		ata_qc_free(qc);

drivers/scsi/sata_sil24.c

@@ -1106,7 +1106,6 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	probe_ent->irq = pdev->irq;
 	probe_ent->irq_flags = IRQF_SHARED;
-	probe_ent->mmio_base = port_base;
 	probe_ent->private_data = hpriv;
 
 	hpriv->host_base = host_base;

drivers/usb/host/ohci-au1xxx.c

@@ -110,7 +110,6 @@ static void au1xxx_start_ohc(struct platform_device *dev)
 
 	printk(KERN_DEBUG __FILE__
 	": Clock to USB host has been enabled \n");
-#endif
 }
 
 static void au1xxx_stop_ohc(struct platform_device *dev)

drivers/usb/input/appletouch.c

@@ -597,9 +597,9 @@ static void atp_disconnect(struct usb_interface *iface)
 	if (dev) {
 		usb_kill_urb(dev->urb);
 		input_unregister_device(dev->input);
-		usb_free_urb(dev->urb);
 		usb_buffer_free(dev->udev, dev->datalen,
 				dev->data, dev->urb->transfer_dma);
+		usb_free_urb(dev->urb);
 		kfree(dev);
 	}
 	printk(KERN_INFO "input: appletouch disconnected\n");

drivers/usb/misc/usbtest.c

@@ -1242,11 +1242,12 @@ done:
 static int ctrl_out (struct usbtest_dev *dev,
 		unsigned count, unsigned length, unsigned vary)
 {
-	unsigned		i, j, len, retval;
+	unsigned		i, j, len;
+	int			retval;
 	u8			*buf;
 	char			*what = "?";
 	struct usb_device	*udev;
-	
+
 	if (length < 1 || length > 0xffff || vary >= length)
 		return -EINVAL;
 

drivers/usb/serial/ftdi_sio.c

@@ -306,6 +306,8 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
 
 
 static struct usb_device_id id_table_combined [] = {
+	{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },

drivers/usb/serial/ftdi_sio.h

@@ -32,6 +32,12 @@
 #define FTDI_NF_RIC_PID	0x0001	/* Product Id */
 
 
+/* www.canusb.com Lawicel CANUSB device */
+#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
+
+/* AlphaMicro Components AMC-232USB01 device */
+#define FTDI_AMC232_PID 0xFF00 /* Product Id */
+
 /* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
 #define FTDI_ACTZWAVE_PID	0xF2D0
 

drivers/usb/serial/ipaq.c

@@ -251,6 +251,8 @@ static struct usb_device_id ipaq_id_table [] = {
 	{ USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */
 	{ USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */
 	{ USB_DEVICE(0x04DD, 0x9102) }, /* SHARP WS003SH USB Modem */
+	{ USB_DEVICE(0x04DD, 0x9121) }, /* SHARP WS004SH USB Modem */
+	{ USB_DEVICE(0x04DD, 0x9123) }, /* SHARP WS007SH USB Modem */
 	{ USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */
 	{ USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */
 	{ USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */

drivers/usb/storage/unusual_devs.h

@@ -1240,6 +1240,16 @@ UNUSUAL_DEV(  0x0ed1, 0x7636, 0x0103, 0x0103,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64),
 
+/* David Kuehling <dvdkhlng@gmx.de>:
+ * for MP3-Player AVOX WSX-300ER (bought in Japan).  Reports lots of SCSI
+ * errors when trying to write.
+ */
+UNUSUAL_DEV(  0x0f19, 0x0105, 0x0100, 0x0100,
+		"C-MEX",
+		"A-VOX",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
 /* Reported by Michael Stattmann <michael@stattmann.com> */
 UNUSUAL_DEV(  0x0fce, 0xd008, 0x0000, 0x0000,
 		"Sony Ericsson",

drivers/video/Kconfig

@@ -554,7 +554,7 @@ config FB_VESA
 
 config FB_IMAC
 	bool "Intel-based Macintosh Framebuffer Support"
-	depends on (FB = y) && X86
+	depends on (FB = y) && X86 && EFI
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT

drivers/video/imacfb.c

@@ -18,6 +18,8 @@
 #include <linux/screen_info.h>
 #include <linux/slab.h>
 #include <linux/string.h>
+#include <linux/dmi.h>
+#include <linux/efi.h>
 
 #include <asm/io.h>
 
@@ -28,7 +30,7 @@ typedef enum _MAC_TYPE {
 	M_I20,
 	M_MINI,
 	M_MACBOOK,
-	M_NEW
+	M_UNKNOWN
 } MAC_TYPE;
 
 /* --------------------------------------------------------------------- */
@@ -52,10 +54,36 @@ static struct fb_fix_screeninfo imacfb_fix __initdata = {
 };
 
 static int inverse;
-static int model		= M_NEW;
+static int model		= M_UNKNOWN;
 static int manual_height;
 static int manual_width;
 
+static int set_system(struct dmi_system_id *id)
+{
+	printk(KERN_INFO "imacfb: %s detected - set system to %ld\n",
+		id->ident, (long)id->driver_data);
+
+	model = (long)id->driver_data;
+
+	return 0;
+}
+
+static struct dmi_system_id __initdata dmi_system_table[] = {
+	{ set_system, "iMac4,1", {
+	  DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."),
+	  DMI_MATCH(DMI_BIOS_VERSION,"iMac4,1") }, (void*)M_I17},
+	{ set_system, "MacBookPro1,1", {
+	  DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."),
+	  DMI_MATCH(DMI_BIOS_VERSION,"MacBookPro1,1") }, (void*)M_I17},
+	{ set_system, "MacBook1,1", {
+	  DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."),
+	  DMI_MATCH(DMI_PRODUCT_NAME,"MacBook1,1")}, (void *)M_MACBOOK},
+	{ set_system, "Macmini1,1", {
+	  DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."),
+	  DMI_MATCH(DMI_PRODUCT_NAME,"Macmini1,1")}, (void *)M_MINI},
+	{},
+};
+
 #define	DEFAULT_FB_MEM	1024*1024*16
 
 /* --------------------------------------------------------------------- */
@@ -149,7 +177,6 @@ static int __init imacfb_probe(struct platform_device *dev)
 		screen_info.lfb_linelength = 1472 * 4;
 		screen_info.lfb_base = 0x80010000;
 		break;
-	case M_NEW:
 	case M_I20:
 		screen_info.lfb_width = 1680;
 		screen_info.lfb_height = 1050;
@@ -207,6 +234,10 @@ static int __init imacfb_probe(struct platform_device *dev)
 		size_remap = size_total;
 	imacfb_fix.smem_len = size_remap;
 
+#ifndef __i386__
+	screen_info.imacpm_seg = 0;
+#endif
+
 	if (!request_mem_region(imacfb_fix.smem_start, size_total, "imacfb")) {
 		printk(KERN_WARNING
 		       "imacfb: cannot reserve video memory at 0x%lx\n",
@@ -324,8 +355,16 @@ static int __init imacfb_init(void)
 	int ret;
 	char *option = NULL;
 
-	/* ignore error return of fb_get_options */
-	fb_get_options("imacfb", &option);
+	if (!efi_enabled)
+		return -ENODEV;
+	if (!dmi_check_system(dmi_system_table))
+		return -ENODEV;
+	if (model == M_UNKNOWN)
+		return -ENODEV;
+
+	if (fb_get_options("imacfb", &option))
+		return -ENODEV;
+
 	imacfb_setup(option);
 	ret = platform_driver_register(&imacfb_driver);
 

fs/adfs/super.c

@@ -308,7 +308,7 @@ static struct adfs_discmap *adfs_read_map(struct super_block *sb, struct adfs_di
 	if (adfs_checkmap(sb, dm))
 		return dm;
 
-	adfs_error(sb, NULL, "map corrupted");
+	adfs_error(sb, "map corrupted");
 
 error_free:
 	while (--zone >= 0)

fs/fuse/file.c

@@ -395,14 +395,16 @@ static int fuse_readpages(struct file *file, struct address_space *mapping,
 	struct fuse_readpages_data data;
 	int err;
 
+	err = -EIO;
 	if (is_bad_inode(inode))
-		return -EIO;
+		goto clean_pages_up;
 
 	data.file = file;
 	data.inode = inode;
 	data.req = fuse_get_req(fc);
+	err = PTR_ERR(data.req);
 	if (IS_ERR(data.req))
-		return PTR_ERR(data.req);
+		goto clean_pages_up;
 
 	err = read_cache_pages(mapping, pages, fuse_readpages_fill, &data);
 	if (!err) {
@@ -412,6 +414,10 @@ static int fuse_readpages(struct file *file, struct address_space *mapping,
 			fuse_put_request(fc, data.req);
 	}
 	return err;
+
+clean_pages_up:
+	put_pages_list(pages);
+	return err;
 }
 
 static size_t fuse_send_write(struct fuse_req *req, struct file *file,

fs/jfs/inode.c

@@ -168,16 +168,15 @@ void jfs_dirty_inode(struct inode *inode)
 	set_cflag(COMMIT_Dirty, inode);
 }
 
-static int
-jfs_get_blocks(struct inode *ip, sector_t lblock, unsigned long max_blocks,
-			struct buffer_head *bh_result, int create)
+int jfs_get_block(struct inode *ip, sector_t lblock,
+		  struct buffer_head *bh_result, int create)
 {
 	s64 lblock64 = lblock;
 	int rc = 0;
 	xad_t xad;
 	s64 xaddr;
 	int xflag;
-	s32 xlen = max_blocks;
+	s32 xlen = bh_result->b_size >> ip->i_blkbits;
 
 	/*
 	 * Take appropriate lock on inode
@@ -188,7 +187,7 @@ jfs_get_blocks(struct inode *ip, sector_t lblock, unsigned long max_blocks,
 		IREAD_LOCK(ip);
 
 	if (((lblock64 << ip->i_sb->s_blocksize_bits) < ip->i_size) &&
-	    (!xtLookup(ip, lblock64, max_blocks, &xflag, &xaddr, &xlen, 0)) &&
+	    (!xtLookup(ip, lblock64, xlen, &xflag, &xaddr, &xlen, 0)) &&
 	    xaddr) {
 		if (xflag & XAD_NOTRECORDED) {
 			if (!create)
@@ -255,13 +254,6 @@ jfs_get_blocks(struct inode *ip, sector_t lblock, unsigned long max_blocks,
 	return rc;
 }
 
-static int jfs_get_block(struct inode *ip, sector_t lblock,
-			 struct buffer_head *bh_result, int create)
-{
-	return jfs_get_blocks(ip, lblock, bh_result->b_size >> ip->i_blkbits,
-			bh_result, create);
-}
-
 static int jfs_writepage(struct page *page, struct writeback_control *wbc)
 {
 	return nobh_writepage(page, jfs_get_block, wbc);

fs/jfs/jfs_inode.h

@@ -32,6 +32,7 @@ extern void jfs_truncate_nolock(struct inode *, loff_t);
 extern void jfs_free_zero_link(struct inode *);
 extern struct dentry *jfs_get_parent(struct dentry *dentry);
 extern void jfs_set_inode_flags(struct inode *);
+extern int jfs_get_block(struct inode *, sector_t, struct buffer_head *, int);
 
 extern const struct address_space_operations jfs_aops;
 extern struct inode_operations jfs_dir_inode_operations;

fs/jfs/super.c

@@ -26,6 +26,7 @@
 #include <linux/moduleparam.h>
 #include <linux/kthread.h>
 #include <linux/posix_acl.h>
+#include <linux/buffer_head.h>
 #include <asm/uaccess.h>
 #include <linux/seq_file.h>
 
@@ -298,7 +299,7 @@ static int parse_options(char *options, struct super_block *sb, s64 *newLVSize,
 			break;
 		}
 
-#if defined(CONFIG_QUOTA)
+#ifdef CONFIG_QUOTA
 		case Opt_quota:
 		case Opt_usrquota:
 			*flag |= JFS_USRQUOTA;
@@ -597,7 +598,7 @@ static int jfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
 	if (sbi->flag & JFS_NOINTEGRITY)
 		seq_puts(seq, ",nointegrity");
 
-#if defined(CONFIG_QUOTA)
+#ifdef CONFIG_QUOTA
 	if (sbi->flag & JFS_USRQUOTA)
 		seq_puts(seq, ",usrquota");
 
@@ -608,6 +609,113 @@ static int jfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
 	return 0;
 }
 
+#ifdef CONFIG_QUOTA
+
+/* Read data from quotafile - avoid pagecache and such because we cannot afford
+ * acquiring the locks... As quota files are never truncated and quota code
+ * itself serializes the operations (and noone else should touch the files)
+ * we don't have to be afraid of races */
+static ssize_t jfs_quota_read(struct super_block *sb, int type, char *data,
+			      size_t len, loff_t off)
+{
+	struct inode *inode = sb_dqopt(sb)->files[type];
+	sector_t blk = off >> sb->s_blocksize_bits;
+	int err = 0;
+	int offset = off & (sb->s_blocksize - 1);
+	int tocopy;
+	size_t toread;
+	struct buffer_head tmp_bh;
+	struct buffer_head *bh;
+	loff_t i_size = i_size_read(inode);
+
+	if (off > i_size)
+		return 0;
+	if (off+len > i_size)
+		len = i_size-off;
+	toread = len;
+	while (toread > 0) {
+		tocopy = sb->s_blocksize - offset < toread ?
+				sb->s_blocksize - offset : toread;
+
+		tmp_bh.b_state = 0;
+		tmp_bh.b_size = 1 << inode->i_blkbits;
+		err = jfs_get_block(inode, blk, &tmp_bh, 0);
+		if (err)
+			return err;
+		if (!buffer_mapped(&tmp_bh))	/* A hole? */
+			memset(data, 0, tocopy);
+		else {
+			bh = sb_bread(sb, tmp_bh.b_blocknr);
+			if (!bh)
+				return -EIO;
+			memcpy(data, bh->b_data+offset, tocopy);
+			brelse(bh);
+		}
+		offset = 0;
+		toread -= tocopy;
+		data += tocopy;
+		blk++;
+	}
+	return len;
+}
+
+/* Write to quotafile */
+static ssize_t jfs_quota_write(struct super_block *sb, int type,
+			       const char *data, size_t len, loff_t off)
+{
+	struct inode *inode = sb_dqopt(sb)->files[type];
+	sector_t blk = off >> sb->s_blocksize_bits;
+	int err = 0;
+	int offset = off & (sb->s_blocksize - 1);
+	int tocopy;
+	size_t towrite = len;
+	struct buffer_head tmp_bh;
+	struct buffer_head *bh;
+
+	mutex_lock(&inode->i_mutex);
+	while (towrite > 0) {
+		tocopy = sb->s_blocksize - offset < towrite ?
+				sb->s_blocksize - offset : towrite;
+
+		tmp_bh.b_state = 0;
+		tmp_bh.b_size = 1 << inode->i_blkbits;
+		err = jfs_get_block(inode, blk, &tmp_bh, 1);
+		if (err)
+			goto out;
+		if (offset || tocopy != sb->s_blocksize)
+			bh = sb_bread(sb, tmp_bh.b_blocknr);
+		else
+			bh = sb_getblk(sb, tmp_bh.b_blocknr);
+		if (!bh) {
+			err = -EIO;
+			goto out;
+		}
+		lock_buffer(bh);
+		memcpy(bh->b_data+offset, data, tocopy);
+		flush_dcache_page(bh->b_page);
+		set_buffer_uptodate(bh);
+		mark_buffer_dirty(bh);
+		unlock_buffer(bh);
+		brelse(bh);
+		offset = 0;
+		towrite -= tocopy;
+		data += tocopy;
+		blk++;
+	}
+out:
+	if (len == towrite)
+		return err;
+	if (inode->i_size < off+len-towrite)
+		i_size_write(inode, off+len-towrite);
+	inode->i_version++;
+	inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+	mark_inode_dirty(inode);
+	mutex_unlock(&inode->i_mutex);
+	return len - towrite;
+}
+
+#endif
+
 static struct super_operations jfs_super_operations = {
 	.alloc_inode	= jfs_alloc_inode,
 	.destroy_inode	= jfs_destroy_inode,
@@ -621,7 +729,11 @@ static struct super_operations jfs_super_operations = {
 	.unlockfs       = jfs_unlockfs,
 	.statfs		= jfs_statfs,
 	.remount_fs	= jfs_remount,
-	.show_options	= jfs_show_options
+	.show_options	= jfs_show_options,
+#ifdef CONFIG_QUOTA
+	.quota_read	= jfs_quota_read,
+	.quota_write	= jfs_quota_write,
+#endif
 };
 
 static struct export_operations jfs_export_operations = {

fs/locks.c

@@ -1421,8 +1421,9 @@ static int __setlease(struct file *filp, long arg, struct file_lock **flp)
 	if (!leases_enable)
 		goto out;
 
-	error = lease_alloc(filp, arg, &fl);
-	if (error)
+	error = -ENOMEM;
+	fl = locks_alloc_lock();
+	if (fl == NULL)
 		goto out;
 
 	locks_copy_lock(fl, lease);
@@ -1430,6 +1431,7 @@ static int __setlease(struct file *filp, long arg, struct file_lock **flp)
 	locks_insert_lock(before, fl);
 
 	*flp = fl;
+	error = 0;
 out:
 	return error;
 }

fs/ocfs2/dlm/dlmmaster.c

@@ -2375,7 +2375,6 @@ leave:
 	mlog(0, "returning %d\n", ret);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(dlm_migrate_lockres);
 
 int dlm_lock_basts_flushed(struct dlm_ctxt *dlm, struct dlm_lock *lock)
 {

fs/ocfs2/dlm/dlmunlock.c

@@ -155,7 +155,7 @@ static enum dlm_status dlmunlock_common(struct dlm_ctxt *dlm,
 	else
 		status = dlm_get_unlock_actions(dlm, res, lock, lksb, &actions);
 
-	if (status != DLM_NORMAL)
+	if (status != DLM_NORMAL && (status != DLM_CANCELGRANT || !master_node))
 		goto leave;
 
 	/* By now this has been masked out of cancel requests. */
@@ -183,8 +183,7 @@ static enum dlm_status dlmunlock_common(struct dlm_ctxt *dlm,
 		spin_lock(&lock->spinlock);
 		/* if the master told us the lock was already granted,
 		 * let the ast handle all of these actions */
-		if (status == DLM_NORMAL &&
-		    lksb->status == DLM_CANCELGRANT) {
+		if (status == DLM_CANCELGRANT) {
 			actions &= ~(DLM_UNLOCK_REMOVE_LOCK|
 				     DLM_UNLOCK_REGRANT_LOCK|
 				     DLM_UNLOCK_CLEAR_CONVERT_TYPE);
@@ -349,14 +348,9 @@ static enum dlm_status dlm_send_remote_unlock_request(struct dlm_ctxt *dlm,
 					vec, veclen, owner, &status);
 	if (tmpret >= 0) {
 		// successfully sent and received
-		if (status == DLM_CANCELGRANT)
-			ret = DLM_NORMAL;
-		else if (status == DLM_FORWARD) {
+		if (status == DLM_FORWARD)
 			mlog(0, "master was in-progress.  retry\n");
-			ret = DLM_FORWARD;
-		} else
-			ret = status;
-		lksb->status = status;
+		ret = status;
 	} else {
 		mlog_errno(tmpret);
 		if (dlm_is_host_down(tmpret)) {
@@ -372,7 +366,6 @@ static enum dlm_status dlm_send_remote_unlock_request(struct dlm_ctxt *dlm,
 			/* something bad.  this will BUG in ocfs2 */
 			ret = dlm_err_to_dlm_status(tmpret);
 		}
-		lksb->status = ret;
 	}
 
 	return ret;
@@ -483,6 +476,10 @@ int dlm_unlock_lock_handler(struct o2net_msg *msg, u32 len, void *data)
 
 	/* lock was found on queue */
 	lksb = lock->lksb;
+	if (flags & (LKM_VALBLK|LKM_PUT_LVB) &&
+	    lock->ml.type != LKM_EXMODE)
+		flags &= ~(LKM_VALBLK|LKM_PUT_LVB);
+
 	/* unlockast only called on originating node */
 	if (flags & LKM_PUT_LVB) {
 		lksb->flags |= DLM_LKSB_PUT_LVB;
@@ -507,11 +504,8 @@ not_found:
 			       "cookie=%u:%llu\n",
 			       dlm_get_lock_cookie_node(unlock->cookie),
 			       dlm_get_lock_cookie_seq(unlock->cookie));
-	else {
-		/* send the lksb->status back to the other node */
-		status = lksb->status;
+	else
 		dlm_lock_put(lock);
-	}
 
 leave:
 	if (res)
@@ -533,26 +527,22 @@ static enum dlm_status dlm_get_cancel_actions(struct dlm_ctxt *dlm,
 
 	if (dlm_lock_on_list(&res->blocked, lock)) {
 		/* cancel this outright */
-		lksb->status = DLM_NORMAL;
 		status = DLM_NORMAL;
 		*actions = (DLM_UNLOCK_CALL_AST |
 			    DLM_UNLOCK_REMOVE_LOCK);
 	} else if (dlm_lock_on_list(&res->converting, lock)) {
 		/* cancel the request, put back on granted */
-		lksb->status = DLM_NORMAL;
 		status = DLM_NORMAL;
 		*actions = (DLM_UNLOCK_CALL_AST |
 			    DLM_UNLOCK_REMOVE_LOCK |
 			    DLM_UNLOCK_REGRANT_LOCK |
 			    DLM_UNLOCK_CLEAR_CONVERT_TYPE);
 	} else if (dlm_lock_on_list(&res->granted, lock)) {
-		/* too late, already granted.  DLM_CANCELGRANT */
-		lksb->status = DLM_CANCELGRANT;
-		status = DLM_NORMAL;
+		/* too late, already granted. */
+		status = DLM_CANCELGRANT;
 		*actions = DLM_UNLOCK_CALL_AST;
 	} else {
 		mlog(ML_ERROR, "lock to cancel is not on any list!\n");
-		lksb->status = DLM_IVLOCKID;
 		status = DLM_IVLOCKID;
 		*actions = 0;
 	}
@@ -569,13 +559,11 @@ static enum dlm_status dlm_get_unlock_actions(struct dlm_ctxt *dlm,
 
 	/* unlock request */
 	if (!dlm_lock_on_list(&res->granted, lock)) {
-		lksb->status = DLM_DENIED;
 		status = DLM_DENIED;
 		dlm_error(status);
 		*actions = 0;
 	} else {
 		/* unlock granted lock */
-		lksb->status = DLM_NORMAL;
 		status = DLM_NORMAL;
 		*actions = (DLM_UNLOCK_FREE_LOCK |
 			    DLM_UNLOCK_CALL_AST |
@@ -632,6 +620,8 @@ retry:
 
 	spin_lock(&res->spinlock);
 	is_master = (res->owner == dlm->node_num);
+	if (flags & LKM_VALBLK && lock->ml.type != LKM_EXMODE)
+		flags &= ~LKM_VALBLK;
 	spin_unlock(&res->spinlock);
 
 	if (is_master) {
@@ -665,7 +655,7 @@ retry:
 	}
 
 	if (call_ast) {
-		mlog(0, "calling unlockast(%p, %d)\n", data, lksb->status);
+		mlog(0, "calling unlockast(%p, %d)\n", data, status);
 		if (is_master) {
 			/* it is possible that there is one last bast 
 			 * pending.  make sure it is flushed, then
@@ -677,9 +667,12 @@ retry:
 			wait_event(dlm->ast_wq, 
 				   dlm_lock_basts_flushed(dlm, lock));
 		}
-		(*unlockast)(data, lksb->status);
+		(*unlockast)(data, status);
 	}
 
+	if (status == DLM_CANCELGRANT)
+		status = DLM_NORMAL;
+
 	if (status == DLM_NORMAL) {
 		mlog(0, "kicking the thread\n");
 		dlm_kick_thread(dlm, res);

fs/ocfs2/localalloc.c

@@ -840,6 +840,12 @@ static int ocfs2_local_alloc_new_window(struct ocfs2_super *osb,
 
 	mlog(0, "Allocating %u clusters for a new window.\n",
 	     ocfs2_local_alloc_window_bits(osb));
+
+	/* Instruct the allocation code to try the most recently used
+	 * cluster group. We'll re-record the group used this pass
+	 * below. */
+	ac->ac_last_group = osb->la_last_gd;
+
 	/* we used the generic suballoc reserve function, but we set
 	 * everything up nicely, so there's no reason why we can't use
 	 * the more specific cluster api to claim bits. */
@@ -852,6 +858,8 @@ static int ocfs2_local_alloc_new_window(struct ocfs2_super *osb,
 		goto bail;
 	}
 
+	osb->la_last_gd = ac->ac_last_group;
+
 	la->la_bm_off = cpu_to_le32(cluster_off);
 	alloc->id1.bitmap1.i_total = cpu_to_le32(cluster_count);
 	/* just in case... In the future when we find space ourselves,

fs/ocfs2/ocfs2.h

@@ -197,7 +197,6 @@ struct ocfs2_super
 	struct ocfs2_node_map recovery_map;
 	struct ocfs2_node_map umount_map;
 
-	u32 num_clusters;
 	u64 root_blkno;
 	u64 system_dir_blkno;
 	u64 bitmap_blkno;
@@ -237,6 +236,7 @@ struct ocfs2_super
 
 	enum ocfs2_local_alloc_state local_alloc_state;
 	struct buffer_head *local_alloc_bh;
+	u64 la_last_gd;
 
 	/* Next two fields are for local node slot recovery during
 	 * mount. */

fs/ocfs2/suballoc.c

@@ -70,12 +70,6 @@ static int ocfs2_block_group_search(struct inode *inode,
 				    struct buffer_head *group_bh,
 				    u32 bits_wanted, u32 min_bits,
 				    u16 *bit_off, u16 *bits_found);
-static int ocfs2_search_chain(struct ocfs2_alloc_context *ac,
-			      u32 bits_wanted,
-			      u32 min_bits,
-			      u16 *bit_off,
-			      unsigned int *num_bits,
-			      u64 *bg_blkno);
 static int ocfs2_claim_suballoc_bits(struct ocfs2_super *osb,
 				     struct ocfs2_alloc_context *ac,
 				     u32 bits_wanted,
@@ -85,11 +79,6 @@ static int ocfs2_claim_suballoc_bits(struct ocfs2_super *osb,
 				     u64 *bg_blkno);
 static int ocfs2_test_bg_bit_allocatable(struct buffer_head *bg_bh,
 					 int nr);
-static int ocfs2_block_group_find_clear_bits(struct ocfs2_super *osb,
-					     struct buffer_head *bg_bh,
-					     unsigned int bits_wanted,
-					     u16 *bit_off,
-					     u16 *bits_found);
 static inline int ocfs2_block_group_set_bits(struct ocfs2_journal_handle *handle,
 					     struct inode *alloc_inode,
 					     struct ocfs2_group_desc *bg,
@@ -143,6 +132,64 @@ static u32 ocfs2_bits_per_group(struct ocfs2_chain_list *cl)
 	return (u32)le16_to_cpu(cl->cl_cpg) * (u32)le16_to_cpu(cl->cl_bpc);
 }
 
+/* somewhat more expensive than our other checks, so use sparingly. */
+static int ocfs2_check_group_descriptor(struct super_block *sb,
+					struct ocfs2_dinode *di,
+					struct ocfs2_group_desc *gd)
+{
+	unsigned int max_bits;
+
+	if (!OCFS2_IS_VALID_GROUP_DESC(gd)) {
+		OCFS2_RO_ON_INVALID_GROUP_DESC(sb, gd);
+		return -EIO;
+	}
+
+	if (di->i_blkno != gd->bg_parent_dinode) {
+		ocfs2_error(sb, "Group descriptor # %llu has bad parent "
+			    "pointer (%llu, expected %llu)",
+			    (unsigned long long)le64_to_cpu(gd->bg_blkno),
+			    (unsigned long long)le64_to_cpu(gd->bg_parent_dinode),
+			    (unsigned long long)le64_to_cpu(di->i_blkno));
+		return -EIO;
+	}
+
+	max_bits = le16_to_cpu(di->id2.i_chain.cl_cpg) * le16_to_cpu(di->id2.i_chain.cl_bpc);
+	if (le16_to_cpu(gd->bg_bits) > max_bits) {
+		ocfs2_error(sb, "Group descriptor # %llu has bit count of %u",
+			    (unsigned long long)le64_to_cpu(gd->bg_blkno),
+			    le16_to_cpu(gd->bg_bits));
+		return -EIO;
+	}
+
+	if (le16_to_cpu(gd->bg_chain) >=
+	    le16_to_cpu(di->id2.i_chain.cl_next_free_rec)) {
+		ocfs2_error(sb, "Group descriptor # %llu has bad chain %u",
+			    (unsigned long long)le64_to_cpu(gd->bg_blkno),
+			    le16_to_cpu(gd->bg_chain));
+		return -EIO;
+	}
+
+	if (le16_to_cpu(gd->bg_free_bits_count) > le16_to_cpu(gd->bg_bits)) {
+		ocfs2_error(sb, "Group descriptor # %llu has bit count %u but "
+			    "claims that %u are free",
+			    (unsigned long long)le64_to_cpu(gd->bg_blkno),
+			    le16_to_cpu(gd->bg_bits),
+			    le16_to_cpu(gd->bg_free_bits_count));
+		return -EIO;
+	}
+
+	if (le16_to_cpu(gd->bg_bits) > (8 * le16_to_cpu(gd->bg_size))) {
+		ocfs2_error(sb, "Group descriptor # %llu has bit count %u but "
+			    "max bitmap bits of %u",
+			    (unsigned long long)le64_to_cpu(gd->bg_blkno),
+			    le16_to_cpu(gd->bg_bits),
+			    8 * le16_to_cpu(gd->bg_size));
+		return -EIO;
+	}
+
+	return 0;
+}
+
 static int ocfs2_block_group_fill(struct ocfs2_journal_handle *handle,
 				  struct inode *alloc_inode,
 				  struct buffer_head *bg_bh,
@@ -663,6 +710,7 @@ static int ocfs2_test_bg_bit_allocatable(struct buffer_head *bg_bh,
 static int ocfs2_block_group_find_clear_bits(struct ocfs2_super *osb,
 					     struct buffer_head *bg_bh,
 					     unsigned int bits_wanted,
+					     unsigned int total_bits,
 					     u16 *bit_off,
 					     u16 *bits_found)
 {
@@ -679,10 +727,8 @@ static int ocfs2_block_group_find_clear_bits(struct ocfs2_super *osb,
 	found = start = best_offset = best_size = 0;
 	bitmap = bg->bg_bitmap;
 
-	while((offset = ocfs2_find_next_zero_bit(bitmap,
-						 le16_to_cpu(bg->bg_bits),
-						 start)) != -1) {
-		if (offset == le16_to_cpu(bg->bg_bits))
+	while((offset = ocfs2_find_next_zero_bit(bitmap, total_bits, start)) != -1) {
+		if (offset == total_bits)
 			break;
 
 		if (!ocfs2_test_bg_bit_allocatable(bg_bh, offset)) {
@@ -911,14 +957,35 @@ static int ocfs2_cluster_group_search(struct inode *inode,
 {
 	int search = -ENOSPC;
 	int ret;
-	struct ocfs2_group_desc *bg = (struct ocfs2_group_desc *) group_bh->b_data;
+	struct ocfs2_group_desc *gd = (struct ocfs2_group_desc *) group_bh->b_data;
 	u16 tmp_off, tmp_found;
+	unsigned int max_bits, gd_cluster_off;
 
 	BUG_ON(!ocfs2_is_cluster_bitmap(inode));
 
-	if (bg->bg_free_bits_count) {
+	if (gd->bg_free_bits_count) {
+		max_bits = le16_to_cpu(gd->bg_bits);
+
+		/* Tail groups in cluster bitmaps which aren't cpg
+		 * aligned are prone to partial extention by a failed
+		 * fs resize. If the file system resize never got to
+		 * update the dinode cluster count, then we don't want
+		 * to trust any clusters past it, regardless of what
+		 * the group descriptor says. */
+		gd_cluster_off = ocfs2_blocks_to_clusters(inode->i_sb,
+							  le64_to_cpu(gd->bg_blkno));
+		if ((gd_cluster_off + max_bits) >
+		    OCFS2_I(inode)->ip_clusters) {
+			max_bits = OCFS2_I(inode)->ip_clusters - gd_cluster_off;
+			mlog(0, "Desc %llu, bg_bits %u, clusters %u, use %u\n",
+			     (unsigned long long)le64_to_cpu(gd->bg_blkno),
+			     le16_to_cpu(gd->bg_bits),
+			     OCFS2_I(inode)->ip_clusters, max_bits);
+		}
+
 		ret = ocfs2_block_group_find_clear_bits(OCFS2_SB(inode->i_sb),
 							group_bh, bits_wanted,
+							max_bits,
 							&tmp_off, &tmp_found);
 		if (ret)
 			return ret;
@@ -951,17 +1018,109 @@ static int ocfs2_block_group_search(struct inode *inode,
 	if (bg->bg_free_bits_count)
 		ret = ocfs2_block_group_find_clear_bits(OCFS2_SB(inode->i_sb),
 							group_bh, bits_wanted,
+							le16_to_cpu(bg->bg_bits),
 							bit_off, bits_found);
 
 	return ret;
 }
 
+static int ocfs2_alloc_dinode_update_counts(struct inode *inode,
+				       struct ocfs2_journal_handle *handle,
+				       struct buffer_head *di_bh,
+				       u32 num_bits,
+				       u16 chain)
+{
+	int ret;
+	u32 tmp_used;
+	struct ocfs2_dinode *di = (struct ocfs2_dinode *) di_bh->b_data;
+	struct ocfs2_chain_list *cl = (struct ocfs2_chain_list *) &di->id2.i_chain;
+
+	ret = ocfs2_journal_access(handle, inode, di_bh,
+				   OCFS2_JOURNAL_ACCESS_WRITE);
+	if (ret < 0) {
+		mlog_errno(ret);
+		goto out;
+	}
+
+	tmp_used = le32_to_cpu(di->id1.bitmap1.i_used);
+	di->id1.bitmap1.i_used = cpu_to_le32(num_bits + tmp_used);
+	le32_add_cpu(&cl->cl_recs[chain].c_free, -num_bits);
+
+	ret = ocfs2_journal_dirty(handle, di_bh);
+	if (ret < 0)
+		mlog_errno(ret);
+
+out:
+	return ret;
+}
+
+static int ocfs2_search_one_group(struct ocfs2_alloc_context *ac,
+				  u32 bits_wanted,
+				  u32 min_bits,
+				  u16 *bit_off,
+				  unsigned int *num_bits,
+				  u64 gd_blkno,
+				  u16 *bits_left)
+{
+	int ret;
+	u16 found;
+	struct buffer_head *group_bh = NULL;
+	struct ocfs2_group_desc *gd;
+	struct inode *alloc_inode = ac->ac_inode;
+	struct ocfs2_journal_handle *handle = ac->ac_handle;
+
+	ret = ocfs2_read_block(OCFS2_SB(alloc_inode->i_sb), gd_blkno,
+			       &group_bh, OCFS2_BH_CACHED, alloc_inode);
+	if (ret < 0) {
+		mlog_errno(ret);
+		return ret;
+	}
+
+	gd = (struct ocfs2_group_desc *) group_bh->b_data;
+	if (!OCFS2_IS_VALID_GROUP_DESC(gd)) {
+		OCFS2_RO_ON_INVALID_GROUP_DESC(alloc_inode->i_sb, gd);
+		ret = -EIO;
+		goto out;
+	}
+
+	ret = ac->ac_group_search(alloc_inode, group_bh, bits_wanted, min_bits,
+				  bit_off, &found);
+	if (ret < 0) {
+		if (ret != -ENOSPC)
+			mlog_errno(ret);
+		goto out;
+	}
+
+	*num_bits = found;
+
+	ret = ocfs2_alloc_dinode_update_counts(alloc_inode, handle, ac->ac_bh,
+					       *num_bits,
+					       le16_to_cpu(gd->bg_chain));
+	if (ret < 0) {
+		mlog_errno(ret);
+		goto out;
+	}
+
+	ret = ocfs2_block_group_set_bits(handle, alloc_inode, gd, group_bh,
+					 *bit_off, *num_bits);
+	if (ret < 0)
+		mlog_errno(ret);
+
+	*bits_left = le16_to_cpu(gd->bg_free_bits_count);
+
+out:
+	brelse(group_bh);
+
+	return ret;
+}
+
 static int ocfs2_search_chain(struct ocfs2_alloc_context *ac,
 			      u32 bits_wanted,
 			      u32 min_bits,
 			      u16 *bit_off,
 			      unsigned int *num_bits,
-			      u64 *bg_blkno)
+			      u64 *bg_blkno,
+			      u16 *bits_left)
 {
 	int status;
 	u16 chain, tmp_bits;
@@ -988,9 +1147,9 @@ static int ocfs2_search_chain(struct ocfs2_alloc_context *ac,
 		goto bail;
 	}
 	bg = (struct ocfs2_group_desc *) group_bh->b_data;
-	if (!OCFS2_IS_VALID_GROUP_DESC(bg)) {
-		OCFS2_RO_ON_INVALID_GROUP_DESC(alloc_inode->i_sb, bg);
-		status = -EIO;
+	status = ocfs2_check_group_descriptor(alloc_inode->i_sb, fe, bg);
+	if (status) {
+		mlog_errno(status);
 		goto bail;
 	}
 
@@ -1018,9 +1177,9 @@ static int ocfs2_search_chain(struct ocfs2_alloc_context *ac,
 			goto bail;
 		}
 		bg = (struct ocfs2_group_desc *) group_bh->b_data;
-		if (!OCFS2_IS_VALID_GROUP_DESC(bg)) {
-			OCFS2_RO_ON_INVALID_GROUP_DESC(alloc_inode->i_sb, bg);
-			status = -EIO;
+		status = ocfs2_check_group_descriptor(alloc_inode->i_sb, fe, bg);
+		if (status) {
+			mlog_errno(status);
 			goto bail;
 		}
 	}
@@ -1099,6 +1258,7 @@ static int ocfs2_search_chain(struct ocfs2_alloc_context *ac,
 	     (unsigned long long)fe->i_blkno);
 
 	*bg_blkno = le64_to_cpu(bg->bg_blkno);
+	*bits_left = le16_to_cpu(bg->bg_free_bits_count);
 bail:
 	if (group_bh)
 		brelse(group_bh);
@@ -1120,6 +1280,8 @@ static int ocfs2_claim_suballoc_bits(struct ocfs2_super *osb,
 {
 	int status;
 	u16 victim, i;
+	u16 bits_left = 0;
+	u64 hint_blkno = ac->ac_last_group;
 	struct ocfs2_chain_list *cl;
 	struct ocfs2_dinode *fe;
 
@@ -1146,6 +1308,28 @@ static int ocfs2_claim_suballoc_bits(struct ocfs2_super *osb,
 		goto bail;
 	}
 
+	if (hint_blkno) {
+		/* Attempt to short-circuit the usual search mechanism
+		 * by jumping straight to the most recently used
+		 * allocation group. This helps us mantain some
+		 * contiguousness across allocations. */
+		status = ocfs2_search_one_group(ac, bits_wanted, min_bits,
+						bit_off, num_bits,
+						hint_blkno, &bits_left);
+		if (!status) {
+			/* Be careful to update *bg_blkno here as the
+			 * caller is expecting it to be filled in, and
+			 * ocfs2_search_one_group() won't do that for
+			 * us. */
+			*bg_blkno = hint_blkno;
+			goto set_hint;
+		}
+		if (status < 0 && status != -ENOSPC) {
+			mlog_errno(status);
+			goto bail;
+		}
+	}
+
 	cl = (struct ocfs2_chain_list *) &fe->id2.i_chain;
 
 	victim = ocfs2_find_victim_chain(cl);
@@ -1153,9 +1337,9 @@ static int ocfs2_claim_suballoc_bits(struct ocfs2_super *osb,
 	ac->ac_allow_chain_relink = 1;
 
 	status = ocfs2_search_chain(ac, bits_wanted, min_bits, bit_off,
-				    num_bits, bg_blkno);
+				    num_bits, bg_blkno, &bits_left);
 	if (!status)
-		goto bail;
+		goto set_hint;
 	if (status < 0 && status != -ENOSPC) {
 		mlog_errno(status);
 		goto bail;
@@ -1177,8 +1361,8 @@ static int ocfs2_claim_suballoc_bits(struct ocfs2_super *osb,
 
 		ac->ac_chain = i;
 		status = ocfs2_search_chain(ac, bits_wanted, min_bits,
-					    bit_off, num_bits,
-					    bg_blkno);
+					    bit_off, num_bits, bg_blkno,
+					    &bits_left);
 		if (!status)
 			break;
 		if (status < 0 && status != -ENOSPC) {
@@ -1186,8 +1370,19 @@ static int ocfs2_claim_suballoc_bits(struct ocfs2_super *osb,
 			goto bail;
 		}
 	}
-bail:
 
+set_hint:
+	if (status != -ENOSPC) {
+		/* If the next search of this group is not likely to
+		 * yield a suitable extent, then we reset the last
+		 * group hint so as to not waste a disk read */
+		if (bits_left < min_bits)
+			ac->ac_last_group = 0;
+		else
+			ac->ac_last_group = *bg_blkno;
+	}
+
+bail:
 	mlog_exit(status);
 	return status;
 }
@@ -1341,7 +1536,7 @@ int ocfs2_claim_clusters(struct ocfs2_super *osb,
 {
 	int status;
 	unsigned int bits_wanted = ac->ac_bits_wanted - ac->ac_bits_given;
-	u64 bg_blkno;
+	u64 bg_blkno = 0;
 	u16 bg_bit_off;
 
 	mlog_entry_void();
@@ -1494,9 +1689,9 @@ static int ocfs2_free_suballoc_bits(struct ocfs2_journal_handle *handle,
 	}
 
 	group = (struct ocfs2_group_desc *) group_bh->b_data;
-	if (!OCFS2_IS_VALID_GROUP_DESC(group)) {
-		OCFS2_RO_ON_INVALID_GROUP_DESC(alloc_inode->i_sb, group);
-		status = -EIO;
+	status = ocfs2_check_group_descriptor(alloc_inode->i_sb, fe, group);
+	if (status) {
+		mlog_errno(status);
 		goto bail;
 	}
 	BUG_ON((count + start_bit) > le16_to_cpu(group->bg_bits));

fs/ocfs2/suballoc.h

@@ -49,6 +49,8 @@ struct ocfs2_alloc_context {
 	u16    ac_chain;
 	int    ac_allow_chain_relink;
 	group_search_t *ac_group_search;
+
+	u64    ac_last_group;
 };
 
 void ocfs2_free_alloc_context(struct ocfs2_alloc_context *ac);

fs/ocfs2/super.c

@@ -1442,8 +1442,13 @@ static int ocfs2_initialize_super(struct super_block *sb,
 
 	osb->bitmap_blkno = OCFS2_I(inode)->ip_blkno;
 
+	/* We don't have a cluster lock on the bitmap here because
+	 * we're only interested in static information and the extra
+	 * complexity at mount time isn't worht it. Don't pass the
+	 * inode in to the read function though as we don't want it to
+	 * be put in the cache. */
 	status = ocfs2_read_block(osb, osb->bitmap_blkno, &bitmap_bh, 0,
-				  inode);
+				  NULL);
 	iput(inode);
 	if (status < 0) {
 		mlog_errno(status);
@@ -1452,7 +1457,6 @@ static int ocfs2_initialize_super(struct super_block *sb,
 
 	di = (struct ocfs2_dinode *) bitmap_bh->b_data;
 	osb->bitmap_cpg = le16_to_cpu(di->id2.i_chain.cl_cpg);
-	osb->num_clusters = le32_to_cpu(di->id1.bitmap1.i_total);
 	brelse(bitmap_bh);
 	mlog(0, "cluster bitmap inode: %llu, clusters per group: %u\n",
 	     (unsigned long long)osb->bitmap_blkno, osb->bitmap_cpg);