[PATCH] ppc32: Dump error status for both PLB segments on 440SP

The PowerPC 440SP SoC has two Processor Local Bus (PLB) segments (a
high-throughput segment and a low-latency segment).  Fix our PLB register
definitions to cope with this, and add code to dump the status of both
segments when a machine check occurs.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

arch/ppc/syslib/ibm44x_common.c

@@ -214,9 +214,20 @@ void __init ibm44x_platform_init(unsigned long r3, unsigned long r4, unsigned lo
 /* Called from machine_check_exception */
 void platform_machine_check(struct pt_regs *regs)
 {
+#ifdef CONFIG_440SP
+	printk("PLB0: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x%08x\n",
+	       mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL),
+	       mfdcr(DCRN_PLB0_ACR), mfdcr(DCRN_PLB0_BESRH),
+	       mfdcr(DCRN_PLB0_BESRL));
+	printk("PLB1: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x%08x\n",
+	       mfdcr(DCRN_PLB1_BEARH), mfdcr(DCRN_PLB1_BEARL),
+	       mfdcr(DCRN_PLB1_ACR), mfdcr(DCRN_PLB1_BESRH),
+	       mfdcr(DCRN_PLB1_BESRL));
+#else
     	printk("PLB0: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x\n",
 		mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL),
 		mfdcr(DCRN_PLB0_ACR),  mfdcr(DCRN_PLB0_BESR));
+#endif
 	printk("POB0: BEAR=0x%08x%08x BESR0=0x%08x BESR1=0x%08x\n",
 		mfdcr(DCRN_POB0_BEARH), mfdcr(DCRN_POB0_BEARL),
 		mfdcr(DCRN_POB0_BESR0), mfdcr(DCRN_POB0_BESR1));

include/asm-ppc/ibm44x.h

@@ -302,6 +302,23 @@
 #define MALOBISR_CH0		0x80000000	/* EOB channel 1 bit */
 #define MALOBISR_CH2		0x40000000	/* EOB channel 2 bit */
 
+#if defined(CONFIG_440SP)
+/* 440SP PLB Arbiter DCRs */
+#define DCRN_PLB_REVID	       0x080		/* PLB Revision ID */
+#define DCRN_PLB_CCR	       0x088		/* PLB Crossbar Control */
+
+#define DCRN_PLB0_ACR	       0x081		/* PLB Arbiter Control */
+#define DCRN_PLB0_BESRL	       0x082		/* PLB Error Status */
+#define DCRN_PLB0_BESRH	       0x083		/* PLB Error Status */
+#define DCRN_PLB0_BEARL	       0x084		/* PLB Error Address Low */
+#define DCRN_PLB0_BEARH	       0x085		/* PLB Error Address High */
+
+#define DCRN_PLB1_ACR		0x089		/* PLB Arbiter Control */
+#define DCRN_PLB1_BESRL		0x08a		/* PLB Error Status */
+#define DCRN_PLB1_BESRH		0x08b		/* PLB Error Status */
+#define DCRN_PLB1_BEARL		0x08c		/* PLB Error Address Low */
+#define DCRN_PLB1_BEARH		0x08d		/* PLB Error Address High */
+#else
 /* 440GP/GX PLB Arbiter DCRs */
 #define DCRN_PLB0_REVID		0x082		/* PLB Arbiter Revision ID */
 #define DCRN_PLB0_ACR		0x083		/* PLB Arbiter Control */
@@ -309,6 +326,7 @@
 #define DCRN_PLB0_BEARL		0x086		/* PLB Error Address Low */
 #define DCRN_PLB0_BEAR		DCRN_PLB0_BEARL	/* 40x compatibility */
 #define DCRN_PLB0_BEARH		0x087		/* PLB Error Address High */
+#endif
 
 /* 440GP/GX PLB to OPB bridge DCRs */
 #define DCRN_POB0_BESR0		0x090