[media] tm6000: Rename active interface register

The register ACTIVE_VIDEO_IF register should be named ACTIVE_IF since it
controls more than just the video interface.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/staging/tm6000/tm6000-alsa.c

@@ -80,7 +80,7 @@ static int _tm6000_start_audio_dma(struct snd_tm6000_card *chip)
 	dprintk(1, "Starting audio DMA\n");
 
 	/* Enables audio */
-	tm6000_set_reg_mask(core, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF, 0x40, 0x40);
+	tm6000_set_reg_mask(core, TM6010_REQ07_RCC_ACTIVE_IF, 0x40, 0x40);
 
 	tm6000_set_audio_bitrate(core, 48000);
 
@@ -97,7 +97,7 @@ static int _tm6000_stop_audio_dma(struct snd_tm6000_card *chip)
 	dprintk(1, "Stopping audio DMA\n");
 
 	/* Disables audio */
-	tm6000_set_reg_mask(core, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF, 0x00, 0x40);
+	tm6000_set_reg_mask(core, TM6010_REQ07_RCC_ACTIVE_IF, 0x00, 0x40);
 
 	return 0;
 }

drivers/staging/tm6000/tm6000-core.c

@@ -187,11 +187,11 @@ void tm6000_set_fourcc_format(struct tm6000_core *dev)
 	if (dev->dev_type == TM6010) {
 		int val;
 
-		val = tm6000_get_reg(dev, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF, 0) & 0xfc;
+		val = tm6000_get_reg(dev, TM6010_REQ07_RCC_ACTIVE_IF, 0) & 0xfc;
 		if (dev->fourcc == V4L2_PIX_FMT_UYVY)
-			tm6000_set_reg(dev, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF, val);
+			tm6000_set_reg(dev, TM6010_REQ07_RCC_ACTIVE_IF, val);
 		else
-			tm6000_set_reg(dev, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF, val | 1);
+			tm6000_set_reg(dev, TM6010_REQ07_RCC_ACTIVE_IF, val | 1);
 	} else {
 		if (dev->fourcc == V4L2_PIX_FMT_UYVY)
 			tm6000_set_reg(dev, TM6010_REQ07_RC1_TRESHOLD, 0xd0);
@@ -268,7 +268,7 @@ int tm6000_init_analog_mode(struct tm6000_core *dev)
 
 	if (dev->dev_type == TM6010) {
 		/* Enable video and audio */
-		tm6000_set_reg_mask(dev, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF,
+		tm6000_set_reg_mask(dev, TM6010_REQ07_RCC_ACTIVE_IF,
 							0x60, 0x60);
 		/* Disable TS input */
 		tm6000_set_reg_mask(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE,
@@ -334,7 +334,7 @@ int tm6000_init_digital_mode(struct tm6000_core *dev)
 {
 	if (dev->dev_type == TM6010) {
 		/* Disable video and audio */
-		tm6000_set_reg_mask(dev, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF,
+		tm6000_set_reg_mask(dev, TM6010_REQ07_RCC_ACTIVE_IF,
 				0x00, 0x60);
 		/* Enable TS input */
 		tm6000_set_reg_mask(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE,
@@ -462,7 +462,7 @@ static struct reg_init tm6010_init_tab[] = {
 	{ TM6010_REQ07_RC4_HSTART0, 0xa0 },
 	{ TM6010_REQ07_RC6_HEND0, 0x40 },
 	{ TM6010_REQ07_RCA_VEND0, 0x31 },
-	{ TM6010_REQ07_RCC_ACTIVE_VIDEO_IF, 0xe1 },
+	{ TM6010_REQ07_RCC_ACTIVE_IF, 0xe1 },
 	{ TM6010_REQ07_RE0_DVIDEO_SOURCE, 0x03 },
 	{ TM6010_REQ07_RFE_POWER_DOWN, 0x7f },
 

drivers/staging/tm6000/tm6000-regs.h

@@ -270,7 +270,9 @@ enum {
 #define TM6010_REQ07_RCA_VEND0				0x07, 0xca
 #define TM6010_REQ07_RCB_DELAY				0x07, 0xcb
 /* ONLY for TM6010 */
-#define TM6010_REQ07_RCC_ACTIVE_VIDEO_IF		0x07, 0xcc
+#define TM6010_REQ07_RCC_ACTIVE_IF			0x07, 0xcc
+#define TM6010_REQ07_RCC_ACTIVE_IF_VIDEO_ENABLE (1 << 5)
+#define TM6010_REQ07_RCC_ACTIVE_IF_AUDIO_ENABLE (1 << 6)
 #define TM6010_REQ07_RD0_USB_PERIPHERY_CONTROL		0x07, 0xd0
 #define TM6010_REQ07_RD1_ADDR_FOR_REQ1			0x07, 0xd1
 #define TM6010_REQ07_RD2_ADDR_FOR_REQ2			0x07, 0xd2