[ARM] 3817/1: iop3xx: split the iop3xx mach into iop32x and iop33x

Split the iop3xx mach type into iop32x and iop33x -- split the config
symbols, and move the code in the mach-iop3xx directory to the mach-iop32x
and mach-iop33x directories.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/Kconfig

@@ -202,12 +202,20 @@ config ARCH_IMX
 	help
 	  Support for Motorola's i.MX family of processors (MX1, MXL).
 
-config ARCH_IOP3XX
-	bool "IOP3xx-based"
+config ARCH_IOP32X
+	bool "IOP32x-based"
 	depends on MMU
 	select PCI
 	help
-	  Support for Intel's IOP3XX (XScale) family of processors.
+	  Support for Intel's 80219 and IOP32X (XScale) family of
+	  processors.
+
+config ARCH_IOP33X
+	bool "IOP33x-based"
+	depends on MMU
+	select PCI
+	help
+	  Support for Intel's IOP33X (XScale) family of processors.
 
 config ARCH_IXP4XX
 	bool "IXP4xx-based"
@@ -312,7 +320,9 @@ source "arch/arm/mach-footbridge/Kconfig"
 
 source "arch/arm/mach-integrator/Kconfig"
 
-source "arch/arm/mach-iop3xx/Kconfig"
+source "arch/arm/mach-iop32x/Kconfig"
+
+source "arch/arm/mach-iop33x/Kconfig"
 
 source "arch/arm/mach-ixp4xx/Kconfig"
 
@@ -848,7 +858,7 @@ source "drivers/block/Kconfig"
 
 source "drivers/acorn/block/Kconfig"
 
-if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
+if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \
 	|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
 	|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
 	|| ARCH_IXP23XX

arch/arm/Makefile

@@ -101,7 +101,8 @@ endif
  machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
  textofs-$(CONFIG_ARCH_CLPS711X)   := 0x00028000
  machine-$(CONFIG_ARCH_CLPS711X)   := clps711x
- machine-$(CONFIG_ARCH_IOP3XX)	   := iop3xx
+ machine-$(CONFIG_ARCH_IOP32X)	   := iop32x
+ machine-$(CONFIG_ARCH_IOP33X)	   := iop33x
  machine-$(CONFIG_ARCH_IXP4XX)	   := ixp4xx
  machine-$(CONFIG_ARCH_IXP2000)    := ixp2000
  machine-$(CONFIG_ARCH_IXP23XX)    := ixp23xx

arch/arm/configs/ep80219_defconfig

@@ -66,7 +66,8 @@ CONFIG_KMOD=y
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_INTEGRATOR is not set
-CONFIG_ARCH_IOP3XX=y
+CONFIG_ARCH_IOP32X=y
+# CONFIG_ARCH_IOP33X is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_L7200 is not set
@@ -93,8 +94,6 @@ CONFIG_ARCH_IQ31244=y
 # CONFIG_ARCH_IQ80331 is not set
 # CONFIG_MACH_IQ80332 is not set
 CONFIG_ARCH_EP80219=y
-CONFIG_ARCH_IOP32X=y
-# CONFIG_ARCH_IOP33X is not set
 
 #
 # IOP3xx Chipset Features

arch/arm/configs/iq31244_defconfig

@@ -67,7 +67,8 @@ CONFIG_KMOD=y
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_INTEGRATOR is not set
-CONFIG_ARCH_IOP3XX=y
+CONFIG_ARCH_IOP32X=y
+# CONFIG_ARCH_IOP33X is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_L7200 is not set
@@ -94,8 +95,6 @@ CONFIG_ARCH_IQ31244=y
 # CONFIG_ARCH_IQ80331 is not set
 # CONFIG_MACH_IQ80332 is not set
 # CONFIG_ARCH_EP80219 is not set
-CONFIG_ARCH_IOP32X=y
-# CONFIG_ARCH_IOP33X is not set
 
 #
 # IOP3xx Chipset Features

arch/arm/configs/iq80321_defconfig

@@ -66,7 +66,8 @@ CONFIG_KMOD=y
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_INTEGRATOR is not set
-CONFIG_ARCH_IOP3XX=y
+CONFIG_ARCH_IOP32X=y
+# CONFIG_ARCH_IOP33X is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_L7200 is not set
@@ -93,8 +94,6 @@ CONFIG_ARCH_IQ80321=y
 # CONFIG_ARCH_IQ80331 is not set
 # CONFIG_MACH_IQ80332 is not set
 # CONFIG_ARCH_EP80219 is not set
-CONFIG_ARCH_IOP32X=y
-# CONFIG_ARCH_IOP33X is not set
 
 #
 # IOP3xx Chipset Features

arch/arm/configs/iq80331_defconfig

@@ -66,7 +66,8 @@ CONFIG_KMOD=y
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_INTEGRATOR is not set
-CONFIG_ARCH_IOP3XX=y
+# CONFIG_ARCH_IOP32X is not set
+CONFIG_ARCH_IOP33X=y
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_L7200 is not set
@@ -93,7 +94,6 @@ CONFIG_ARCH_IOP3XX=y
 CONFIG_ARCH_IQ80331=y
 # CONFIG_MACH_IQ80332 is not set
 # CONFIG_ARCH_EP80219 is not set
-CONFIG_ARCH_IOP33X=y
 
 #
 # IOP3xx Chipset Features

arch/arm/configs/iq80332_defconfig

@@ -66,7 +66,8 @@ CONFIG_KMOD=y
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_INTEGRATOR is not set
-CONFIG_ARCH_IOP3XX=y
+# CONFIG_ARCH_IOP32X is not set
+CONFIG_ARCH_IOP33X=y
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_L7200 is not set
@@ -93,7 +94,6 @@ CONFIG_ARCH_IOP3XX=y
 # CONFIG_ARCH_IQ80331 is not set
 CONFIG_MACH_IQ80332=y
 # CONFIG_ARCH_EP80219 is not set
-CONFIG_ARCH_IOP33X=y
 
 #
 # IOP3xx Chipset Features

arch/arm/mach-iop32x/Kconfig

@@ -0,0 +1,28 @@
+if ARCH_IOP32X
+
+menu "IOP32x Implementation Options"
+
+comment "IOP32x Platform Types"
+
+config ARCH_IQ80321
+	bool "Enable support for IQ80321"
+	help
+	  Say Y here if you want to run your kernel on the Intel IQ80321
+	  evaluation kit for the IOP321 chipset.
+
+config ARCH_IQ31244
+	bool "Enable support for IQ31244"
+	help
+	  Say Y here if you want to run your kernel on the Intel IQ31244
+	  evaluation kit for the IOP321 chipset.
+
+config ARCH_EP80219
+	bool "Enable support for EP80219"
+	select ARCH_IQ31244
+	help
+	  Say Y here if you want to run your kernel on the Intel EP80219
+	  evaluation kit for the Intel 80219 chipset (a IOP321 variant).
+
+endmenu
+
+endif

arch/arm/mach-iop32x/Makefile

@@ -0,0 +1,11 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y			:= common.o setup.o irq.o pci.o time.o
+obj-m			:=
+obj-n			:=
+obj-			:=
+
+obj-$(CONFIG_ARCH_IQ80321) += iq80321-mm.o iq80321-pci.o
+obj-$(CONFIG_ARCH_IQ31244) += iq31244-mm.o iq31244-pci.o

arch/arm/mach-iop32x/Makefile.boot

@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0xa0008000
+params_phys-y	:= 0xa0000100
+initrd_phys-y	:= 0xa0800000

arch/arm/mach-iop3xx/common.c → arch/arm/mach-iop32x/common.c

@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-iop3xx/common.c
+ * arch/arm/mach-iop32x/common.c
  *
  * Common routines shared across all IOP3xx implementations
  *

arch/arm/mach-iop3xx/iq31244-mm.c → arch/arm/mach-iop32x/iq31244-mm.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-iop3xx/mm.c
+ * linux/arch/arm/mach-iop32x/iq31244-mm.c
  *
  * Low level memory initialization for iq80321 platform
  *

arch/arm/mach-iop3xx/iq31244-pci.c → arch/arm/mach-iop32x/iq31244-pci.c

@@ -1,7 +1,7 @@
 /*
- * arch/arm/mach-iop3xx/iq80321-pci.c
+ * arch/arm/mach-iop32x/iq31244-pci.c
  *
- * PCI support for the Intel IQ80321 reference board
+ * PCI support for the Intel IQ31244 reference board
  *
  * Author: Rory Bolt <rorybolt@pacbell.net>
  * Copyright (C) 2002 Rory Bolt

arch/arm/mach-iop3xx/iq80321-mm.c → arch/arm/mach-iop32x/iq80321-mm.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-iop3xx/mm.c
+ * linux/arch/arm/mach-iop32x/iq80321-mm.c
  *
  * Low level memory initialization for iq80321 platform
  *

arch/arm/mach-iop3xx/iq80321-pci.c → arch/arm/mach-iop32x/iq80321-pci.c

@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-iop3xx/iq80321-pci.c
+ * arch/arm/mach-iop32x/iq80321-pci.c
  *
  * PCI support for the Intel IQ80321 reference board
  *

arch/arm/mach-iop3xx/iop321-irq.c → arch/arm/mach-iop32x/irq.c

@@ -1,7 +1,7 @@
 /*
- * linux/arch/arm/mach-iop3xx/iop321-irq.c
+ * linux/arch/arm/mach-iop32x/irq.c
  *
- * Generic IOP321 IRQ handling functionality
+ * Generic IOP32X IRQ handling functionality
  *
  * Author: Rory Bolt <rorybolt@pacbell.net>
  * Copyright (C) 2002 Rory Bolt
@@ -86,7 +86,7 @@ void __init iop321_init_irq(void)
 	   machine_is_iq31244()) 	// all interrupts are inputs to chip
 		*IOP321_PCIIRSR = 0x0f;
 
-	for(i = IOP321_IRQ_OFS; i < NR_IOP321_IRQS; i++)
+	for(i = IOP321_IRQ_OFS; i < NR_IRQS; i++)
 	{
 		set_irq_chip(i, &ext_chip);
 		set_irq_handler(i, do_level_IRQ);

arch/arm/mach-iop3xx/iop321-pci.c → arch/arm/mach-iop32x/pci.c

@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-iop3xx/iop321-pci.c
+ * arch/arm/mach-iop32x/pci.c
  *
  * PCI support for the Intel IOP321 chipset
  *

arch/arm/mach-iop3xx/iop321-setup.c → arch/arm/mach-iop32x/setup.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-iop3xx/iop321-setup.c
+ * linux/arch/arm/mach-iop32x/setup.c
  *
  * Author: Nicolas Pitre <nico@cam.org>
  * Copyright (C) 2001 MontaVista Software, Inc.

arch/arm/mach-iop3xx/iop321-time.c → arch/arm/mach-iop32x/time.c

@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-iop3xx/iop321-time.c
+ * arch/arm/mach-iop32x/time.c
  *
  * Timer code for IOP321 based systems
  *

arch/arm/mach-iop33x/Kconfig

@@ -0,0 +1,27 @@
+if ARCH_IOP33X
+
+menu "IOP33x Implementation Options"
+
+comment "IOP33x Platform Types"
+
+config ARCH_IQ80331
+	bool "Enable support for IQ80331"
+	help
+	  Say Y here if you want to run your kernel on the Intel IQ80331
+	  evaluation kit for the IOP331 chipset.
+
+config MACH_IQ80332
+	bool "Enable support for IQ80332"
+	help
+	  Say Y here if you want to run your kernel on the Intel IQ80332
+	  evaluation kit for the IOP332 chipset.
+
+config IOP331_STEPD
+	bool "Chip stepping D of the IOP80331 processor or IOP80333"
+	help
+	  Say Y here if you have StepD of the IOP80331 or IOP8033
+	  based platforms.
+
+endmenu
+
+endif

arch/arm/mach-iop33x/Makefile

@@ -0,0 +1,11 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y			:= common.o setup.o irq.o pci.o time.o
+obj-m			:=
+obj-n			:=
+obj-			:=
+
+obj-$(CONFIG_ARCH_IQ80331) += iq80331-mm.o iq80331-pci.o
+obj-$(CONFIG_MACH_IQ80332) += iq80332-mm.o iq80332-pci.o

arch/arm/mach-iop33x/Makefile.boot

@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000

arch/arm/mach-iop33x/common.c

@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-iop33x/common.c
+ *
+ * Common routines shared across all IOP3xx implementations
+ *
+ * Author: Deepak Saxena <dsaxena@mvista.com>
+ *
+ * Copyright 2003 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/delay.h>
+#include <asm/hardware.h>
+
+/*
+ * Shared variables
+ */
+unsigned long iop3xx_pcibios_min_io = 0;
+unsigned long iop3xx_pcibios_min_mem = 0;

arch/arm/mach-iop3xx/iq80331-mm.c → arch/arm/mach-iop33x/iq80331-mm.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-iop3xx/mm.c
+ * linux/arch/arm/mach-iop33x/iq80331-mm.c
  *
  * Low level memory initialization for iq80331 platform
  *

arch/arm/mach-iop3xx/iq80331-pci.c → arch/arm/mach-iop33x/iq80331-pci.c

@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-iop3xx/iq80331-pci.c
+ * arch/arm/mach-iop33x/iq80331-pci.c
  *
  * PCI support for the Intel IQ80331 reference board
  *

arch/arm/mach-iop3xx/iq80332-mm.c → arch/arm/mach-iop33x/iq80332-mm.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-iop3xx/mm.c
+ * linux/arch/arm/mach-iop33x/iq80332-mm.c
  *
  * Low level memory initialization for iq80332 platform
  *

arch/arm/mach-iop3xx/iq80332-pci.c → arch/arm/mach-iop33x/iq80332-pci.c

@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-iop3xx/iq80332-pci.c
+ * arch/arm/mach-iop33x/iq80332-pci.c
  *
  * PCI support for the Intel IQ80332 reference board
  *

arch/arm/mach-iop3xx/iop331-irq.c → arch/arm/mach-iop33x/irq.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-iop3xx/iop331-irq.c
+ * linux/arch/arm/mach-iop33x/irq.c
  *
  * Generic IOP331 IRQ handling functionality
  *
@@ -119,7 +119,7 @@ void __init iop331_init_irq(void)
 	if(machine_is_iq80331()) 	// all interrupts are inputs to chip
 		*IOP331_PCIIRSR = 0x0f;
 
-	for(i = IOP331_IRQ_OFS; i < NR_IOP331_IRQS; i++)
+	for(i = IOP331_IRQ_OFS; i < NR_IRQS; i++)
 	{
 		set_irq_chip(i, (i < 32) ? &iop331_irqchip1 : &iop331_irqchip2);
 		set_irq_handler(i, do_level_IRQ);

arch/arm/mach-iop3xx/iop331-pci.c → arch/arm/mach-iop33x/pci.c

@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-iop3xx/iop331-pci.c
+ * arch/arm/mach-iop33x/pci.c
  *
  * PCI support for the Intel IOP331 chipset
  *

arch/arm/mach-iop3xx/iop331-setup.c → arch/arm/mach-iop33x/setup.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-iop3xx/iop331-setup.c
+ * linux/arch/arm/mach-iop33x/setup.c
  *
  * Author: Dave Jiang (dave.jiang@intel.com)
  * Copyright (C) 2004 Intel Corporation.

arch/arm/mach-iop3xx/iop331-time.c → arch/arm/mach-iop33x/time.c

@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-iop3xx/iop331-time.c
+ * arch/arm/mach-iop33x/time.c
  *
  * Timer code for IOP331 based systems
  *

arch/arm/mach-iop3xx/Kconfig

@@ -1,66 +0,0 @@
-if ARCH_IOP3XX
-
-menu "IOP3xx Implementation Options"
-
-comment "IOP3xx Platform Types"
-
-config ARCH_IQ80321
-	bool "Enable support for IQ80321"
-	select ARCH_IOP32X
-	help
-	  Say Y here if you want to run your kernel on the Intel IQ80321
-	  evaluation kit for the IOP321 chipset.
-
-config ARCH_IQ31244
-	bool "Enable support for IQ31244"
-	select ARCH_IOP32X
-	help
-	  Say Y here if you want to run your kernel on the Intel IQ31244
-	  evaluation kit for the IOP321 chipset.
-
-config ARCH_IQ80331
-	bool "Enable support for IQ80331"
-	select ARCH_IOP33X
-	help
-	  Say Y here if you want to run your kernel on the Intel IQ80331
-	  evaluation kit for the IOP331 chipset.
-
-config MACH_IQ80332
-	bool "Enable support for IQ80332"
-	select ARCH_IOP33X
-	help
-	  Say Y here if you want to run your kernel on the Intel IQ80332
-	  evaluation kit for the IOP332 chipset.
-
-config ARCH_EP80219
-	bool "Enable support for EP80219"
-	select ARCH_IOP32X
-	select ARCH_IQ31244
-	help
-	  Say Y here if you want to run your kernel on the Intel EP80219
-	  evaluation kit for the Intel 80219 chipset (a IOP321 variant).
-
-# Which IOP variant are we running?
-config ARCH_IOP32X
-	bool
-	help
-	  The IQ80321 uses the IOP321 variant.
-	  The IQ31244 and EP80219 uses the IOP321 variant.
-
-config ARCH_IOP33X
-	bool
-	default ARCH_IQ80331
-	help
-	  The IQ80331, IQ80332, and IQ80333 uses the IOP331 variant.
-
-comment "IOP3xx Chipset Features"
-
-config IOP331_STEPD
-	bool "Chip stepping D of the IOP80331 processor or IOP80333"
-	depends on ARCH_IOP33X
-	help
-	  Say Y here if you have StepD of the IOP80331 or IOP8033
-	  based platforms.
-
-endmenu
-endif

arch/arm/mach-iop3xx/Makefile

@@ -1,23 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			:= common.o
-
-obj-m			:=
-obj-n			:=
-obj-			:=
-
-obj-$(CONFIG_ARCH_IOP32X)  += iop321-setup.o iop321-irq.o iop321-pci.o iop321-time.o
-
-obj-$(CONFIG_ARCH_IOP33X)  += iop331-setup.o iop331-irq.o iop331-pci.o iop331-time.o
-
-obj-$(CONFIG_ARCH_IQ80321) += iq80321-mm.o iq80321-pci.o
-
-obj-$(CONFIG_ARCH_IQ31244) += iq31244-mm.o iq31244-pci.o
-
-obj-$(CONFIG_ARCH_IQ80331) += iq80331-mm.o iq80331-pci.o
-
-obj-$(CONFIG_MACH_IQ80332) += iq80332-mm.o iq80332-pci.o

arch/arm/mach-iop3xx/Makefile.boot

@@ -1,9 +0,0 @@
-   zreladdr-y	:= 0xa0008000
-params_phys-y	:= 0xa0000100
-initrd_phys-y	:= 0xa0800000
-ifeq ($(CONFIG_ARCH_IOP33X),y)
-   zreladdr-y	:= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
-endif
-

arch/arm/mm/Kconfig

@@ -232,7 +232,7 @@ config CPU_SA1100
 # XScale
 config CPU_XSCALE
 	bool
-	depends on ARCH_IOP3XX || ARCH_PXA || ARCH_IXP4XX || ARCH_IXP2000
+	depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_PXA || ARCH_IXP4XX || ARCH_IXP2000
 	default y
 	select CPU_32v5
 	select CPU_ABRT_EV5T

drivers/i2c/busses/Kconfig

@@ -196,7 +196,7 @@ config I2C_IBM_IIC
 
 config I2C_IOP3XX
 	tristate "Intel IOP3xx and IXP4xx on-chip I2C interface"
-	depends on (ARCH_IOP3XX || ARCH_IXP4XX) && I2C
+	depends on (ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX) && I2C
 	help
 	  Say Y here if you want to use the IIC bus controller on
 	  the Intel IOP3xx I/O Processors or IXP4xx Network Processors.

include/asm-arm/arch-iop32x/debug-macro.S

@@ -0,0 +1,20 @@
+/* linux/include/asm-arm/arch-iop32x/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mov	\rx, #0xfe000000	@ physical
+		orr	\rx, \rx, #0x00800000	@ location of the UART
+		.endm
+
+#define UART_SHIFT	0
+#include <asm/hardware/debug-8250.S>

include/asm-arm/arch-iop3xx/dma.h → include/asm-arm/arch-iop32x/dma.h

@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-iop3xx/dma.h
+ * linux/include/asm-arm/arch-iop32x/dma.h
  *
  *  Copyright (C) 2004 Intel Corp.
  *

include/asm-arm/arch-iop32x/entry-macro.S

@@ -0,0 +1,28 @@
+/*
+ * include/asm-arm/arch-iop32x/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IOP32x-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <asm/arch/irqs.h>
+
+		.macro  disable_fiq
+		.endm
+
+		/*
+		 * Note: only deal with normal interrupts, not FIQ
+		 */
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov     \irqnr, #0
+		mrc     p6, 0, \irqstat, c8, c0, 0      @ Read IINTSRC
+		cmp     \irqstat, #0
+		beq     1001f
+		clz     \irqnr, \irqstat
+		mov     \base, #31
+		subs    \irqnr,\base,\irqnr
+		add     \irqnr,\irqnr,#IRQ_IOP321_DMA0_EOT
+1001:
+		.endm

include/asm-arm/arch-iop3xx/hardware.h → include/asm-arm/arch-iop32x/hardware.h

@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-iop3xx/hardware.h
+ * linux/include/asm-arm/arch-iop32x/hardware.h
  */
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
@@ -44,14 +44,11 @@ extern unsigned int processor_id;
  *
  */
 #include "iop321.h"
-#include "iop331.h"
 
 /*
  * Board specific bits
  */
 #include "iq80321.h"
 #include "iq31244.h"
-#include "iq80331.h"
-#include "iq80332.h"
 
 #endif  /* _ASM_ARCH_HARDWARE_H */

include/asm-arm/arch-iop3xx/io.h → include/asm-arm/arch-iop32x/io.h

@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-iop3xx/io.h
+ * linux/include/asm-arm/arch-iop32x/io.h
  *
  *  Copyright (C) 2001  MontaVista Software, Inc.
  *

include/asm-arm/arch-iop3xx/iop321.h → include/asm-arm/arch-iop32x/iop321.h

@@ -1,5 +1,5 @@
 /*
- * linux/include/asm/arch-iop3xx/iop321.h
+ * linux/include/asm/arch-iop32x/iop321.h
  *
  * Intel IOP321 Chip definitions
  *
@@ -21,11 +21,7 @@
  * IOP3xx variants but behave slightly differently on each.
  */
 #ifndef __ASSEMBLY__
-#ifdef	CONFIG_ARCH_IOP32X
-#define iop_is_321() (((processor_id & 0xfffff5e0) == 0x69052420))
-#else
-#define	iop_is_321()	0
-#endif
+#define iop_is_321()		1
 #endif
 
 /*

include/asm-arm/arch-iop3xx/iq31244.h → include/asm-arm/arch-iop32x/iq31244.h

@@ -1,5 +1,5 @@
 /*
- * linux/include/asm/arch-iop3xx/iq31244.h
+ * linux/include/asm/arch-iop32x/iq31244.h
  *
  * Intel IQ31244 evaluation board registers
  */

include/asm-arm/arch-iop3xx/iq80321.h → include/asm-arm/arch-iop32x/iq80321.h

@@ -1,5 +1,5 @@
 /*
- * linux/include/asm/arch-iop3xx/iq80321.h
+ * linux/include/asm/arch-iop32x/iq80321.h
  *
  * Intel IQ80321 evaluation board registers
  */

include/asm-arm/arch-iop3xx/iop321-irqs.h → include/asm-arm/arch-iop32x/irqs.h

@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-iop3xx/irqs.h
+ * linux/include/asm-arm/arch-iop32x/irqs.h
  *
  * Author:	Rory Bolt <rorybolt@pacbell.net>
  * Copyright:	(C) 2002 Rory Bolt
@@ -9,8 +9,8 @@
  * published by the Free Software Foundation.
  *
  */
-#ifndef _IOP321_IRQS_H_
-#define _IOP321_IRQS_H_
+#ifndef _IRQS_H_
+#define _IRQS_H_
 
 /*
  * IOP80321 chipset interrupts
@@ -54,9 +54,7 @@
 #define IRQ_IOP321_XINT3	IOP321_IRQ(30)
 #define IRQ_IOP321_HPI		IOP321_IRQ(31)
 
-#define NR_IOP321_IRQS		(IOP321_IRQ(31) + 1)
-
-#define NR_IRQS			NR_IOP321_IRQS
+#define NR_IRQS			(IOP321_IRQ(31) + 1)
 
 
 /*
@@ -97,4 +95,4 @@
 #define	IRQ_IQ31244_INTC	IRQ_IOP321_XINT2
 #define	IRQ_IQ31244_INTD	IRQ_IOP321_XINT3
 
-#endif // _IOP321_IRQ_H_
+#endif // _IRQ_H_

include/asm-arm/arch-iop3xx/memory.h → include/asm-arm/arch-iop32x/memory.h

@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-iop3xx/memory.h
+ * linux/include/asm-arm/arch-iop32x/memory.h
  */
 
 #ifndef __ASM_ARCH_MEMORY_H
@@ -10,11 +10,7 @@
 /*
  * Physical DRAM offset.
  */
-#ifndef CONFIG_ARCH_IOP33X
 #define PHYS_OFFSET	UL(0xa0000000)
-#else
-#define PHYS_OFFSET	UL(0x00000000)
-#endif
 
 /*
  * Virtual view <-> PCI DMA view memory address translations
@@ -23,16 +19,9 @@
  * bus_to_virt: Used to convert an address for DMA operations
  *		to an address that the kernel can use.
  */
-#if defined(CONFIG_ARCH_IOP32X)
 
 #define __virt_to_bus(x)	(((__virt_to_phys(x)) & ~(*IOP321_IATVR2)) | ((*IOP321_IABAR2) & 0xfffffff0))
 #define __bus_to_virt(x)    (__phys_to_virt(((x) & ~(*IOP321_IALR2)) | ( *IOP321_IATVR2)))
 
-#elif defined(CONFIG_ARCH_IOP33X)
-
-#define __virt_to_bus(x)	(((__virt_to_phys(x)) & ~(*IOP331_IATVR2)) | ((*IOP331_IABAR2) & 0xfffffff0))
-#define __bus_to_virt(x)    (__phys_to_virt(((x) & ~(*IOP331_IALR2)) | ( *IOP331_IATVR2)))
-
-#endif
 
 #endif

include/asm-arm/arch-iop3xx/system.h → include/asm-arm/arch-iop32x/system.h

@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-iop3xx/system.h
+ * linux/include/asm-arm/arch-iop32x/system.h
  *
  *  Copyright (C) 2001 MontaVista Software, Inc.
  *
@@ -16,13 +16,7 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode)
 {
-#ifdef CONFIG_ARCH_IOP32X
     *IOP321_PCSR = 0x30;
-#endif
-
-#ifdef CONFIG_ARCH_IOP33X
-    *IOP331_PCSR = 0x30;
-#endif
 
 	if ( 1 && mode == 's') {
 		/* Jump into ROM at address 0 */

include/asm-arm/arch-iop32x/timex.h

@@ -0,0 +1,8 @@
+/*
+ * linux/include/asm-arm/arch-iop32x/timex.h
+ *
+ * IOP3xx architecture timex specifications
+ */
+#include <asm/hardware.h>
+
+#define CLOCK_TICK_RATE IOP321_TICK_RATE

include/asm-arm/arch-iop32x/uncompress.h

@@ -0,0 +1,38 @@
+/*
+ *  linux/include/asm-arm/arch-iop32x/uncompress.h
+ */
+#include <asm/types.h>
+#include <asm/mach-types.h>
+#include <linux/serial_reg.h>
+#include <asm/hardware.h>
+
+static volatile u8 *uart_base;
+
+#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
+
+static inline void putc(char c)
+{
+	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+		barrier();
+	*uart_base = c;
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+	if (machine_is_iq80321())
+		uart_base = (volatile u8 *)IQ80321_UART;
+	else if (machine_is_iq31244())
+		uart_base = (volatile u8 *)IQ31244_UART;
+	else
+		uart_base = (volatile u8 *)0xfe800000;
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
+#define arch_decomp_wdog()

include/asm-arm/arch-iop3xx/vmalloc.h → include/asm-arm/arch-iop32x/vmalloc.h

@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-iop3xx/vmalloc.h
+ * linux/include/asm-arm/arch-iop32x/vmalloc.h
  */
 
 /*

include/asm-arm/arch-iop33x/debug-macro.S

@@ -0,0 +1,24 @@
+/* linux/include/asm-arm/arch-iop33x/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ mmu enabled?
+		moveq	\rx, #0xff000000	@ physical
+		movne	\rx, #0xfe000000	@ virtual
+		orr	\rx, \rx, #0x00ff0000
+		orr	\rx, \rx, #0x0000f700
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>

include/asm-arm/arch-iop33x/dma.h

@@ -0,0 +1,9 @@
+/*
+ * linux/include/asm-arm/arch-iop33x/dma.h
+ *
+ *  Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */

include/asm-arm/arch-iop3xx/entry-macro.S → include/asm-arm/arch-iop33x/entry-macro.S

@@ -1,7 +1,7 @@
 /*
- * include/asm-arm/arch-iop3xx/entry-macro.S
+ * include/asm-arm/arch-iop33x/entry-macro.S
  *
- * Low-level IRQ helper macros for IOP3xx-based platforms
+ * Low-level IRQ helper macros for IOP33x-based platforms
  *
  * This file is licensed under  the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -9,26 +9,6 @@
  */
 #include <asm/arch/irqs.h>
 
-#if defined(CONFIG_ARCH_IOP32X)
-		.macro  disable_fiq
-		.endm
-
-		/*
-		 * Note: only deal with normal interrupts, not FIQ
-		 */
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov     \irqnr, #0
-		mrc     p6, 0, \irqstat, c8, c0, 0      @ Read IINTSRC
-		cmp     \irqstat, #0
-		beq     1001f
-		clz     \irqnr, \irqstat
-		mov     \base, #31
-		subs    \irqnr,\base,\irqnr
-		add     \irqnr,\irqnr,#IRQ_IOP321_DMA0_EOT
-1001:
-		.endm
-
-#elif defined(CONFIG_ARCH_IOP33X)
 		.macro  disable_fiq
 		.endm
 
@@ -47,11 +27,8 @@
 		rsbs    \irqnr,\irqnr,#31   @ recommend by RMK
 		add	\irqnr,\irqnr,#IRQ_IOP331_XINT8
 		b	1001f
-1002:	clz     \irqnr, \irqstat
+1002:		clz     \irqnr, \irqstat
 		rsbs    \irqnr,\irqnr,#31   @ recommend by RMK
 		add     \irqnr,\irqnr,#IRQ_IOP331_DMA0_EOT
 1001:
 		.endm
-
-#endif
-

include/asm-arm/arch-iop33x/hardware.h

@@ -0,0 +1,54 @@
+/*
+ * linux/include/asm-arm/arch-iop33x/hardware.h
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/types.h>
+
+/*
+ * Note about PCI IO space mappings
+ *
+ * To make IO space accesses efficient, we store virtual addresses in
+ * the IO resources.
+ *
+ * The PCI IO space is located at virtual 0xfe000000 from physical
+ * 0x90000000.  The PCI BARs must be programmed with physical addresses,
+ * but when we read them, we convert them to virtual addresses.  See
+ * arch/arm/mach-iop33x/pci.c
+ */
+
+#define pcibios_assign_all_busses() 1
+
+
+/*
+ * The min PCI I/O and MEM space are dependent on what specific
+ * chipset/platform we are running on, so instead of hardcoding with
+ * #ifdefs, we just fill these in the platform level PCI init code.
+ */
+#ifndef __ASSEMBLY__
+extern unsigned long iop3xx_pcibios_min_io;
+extern unsigned long iop3xx_pcibios_min_mem;
+
+extern unsigned int processor_id;
+#endif
+
+/*
+ * We just set these to zero since they are really bogus anyways
+ */
+#define PCIBIOS_MIN_IO      (iop3xx_pcibios_min_io)
+#define PCIBIOS_MIN_MEM     (iop3xx_pcibios_min_mem)
+
+/*
+ * Generic chipset bits
+ *
+ */
+#include "iop331.h"
+
+/*
+ * Board specific bits
+ */
+#include "iq80331.h"
+#include "iq80332.h"
+
+#endif  /* _ASM_ARCH_HARDWARE_H */

include/asm-arm/arch-iop33x/io.h

@@ -0,0 +1,21 @@
+/*
+ * linux/include/asm-arm/arch-iop33x/io.h
+ *
+ *  Copyright (C) 2001  MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <asm/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(p)			((void __iomem *)(p))
+#define __mem_pci(a)		(a)
+
+#endif

include/asm-arm/arch-iop3xx/iop331.h → include/asm-arm/arch-iop33x/iop331.h

@@ -1,5 +1,5 @@
 /*
- * linux/include/asm/arch-iop3xx/iop331.h
+ * linux/include/asm/arch-iop33x/iop331.h
  *
  * Intel IOP331 Chip definitions
  *
@@ -20,12 +20,7 @@
  * IOP3xx variants but behave slightly differently on each.
  */
 #ifndef __ASSEMBLY__
-#ifdef	CONFIG_ARCH_IOP33X
-/*#define	iop_is_331()	((processor_id & 0xffffffb0) == 0x69054090) */
-#define	iop_is_331()	((processor_id & 0xffffff30) == 0x69054010)
-#else
-#define	iop_is_331()	0
-#endif
+#define	iop_is_331()		1
 #endif
 
 /*

include/asm-arm/arch-iop3xx/iq80331.h → include/asm-arm/arch-iop33x/iq80331.h

@@ -1,5 +1,5 @@
 /*
- * linux/include/asm/arch-iop3xx/iq80331.h
+ * linux/include/asm/arch-iop33x/iq80331.h
  *
  * Intel IQ80331 evaluation board registers
  */

include/asm-arm/arch-iop3xx/iq80332.h → include/asm-arm/arch-iop33x/iq80332.h

@@ -1,5 +1,5 @@
 /*
- * linux/include/asm/arch-iop3xx/iq80332.h
+ * linux/include/asm/arch-iop33x/iq80332.h
  *
  * Intel IQ80332 evaluation board registers
  */

include/asm-arm/arch-iop3xx/iop331-irqs.h → include/asm-arm/arch-iop33x/irqs.h

@@ -1,5 +1,5 @@
 /*
- * linux/include/asm-arm/arch-iop3xx/irqs.h
+ * linux/include/asm-arm/arch-iop33x/irqs.h
  *
  * Author:	Dave Jiang (dave.jiang@intel.com)
  * Copyright:	(C) 2003 Intel Corp.
@@ -9,8 +9,8 @@
  * published by the Free Software Foundation.
  *
  */
-#ifndef _IOP331_IRQS_H_
-#define _IOP331_IRQS_H_
+#ifndef _IRQS_H_
+#define _IRQS_H_
 
 /*
  * IOP80331 chipset interrupts
@@ -86,9 +86,7 @@
 #define IRQ_IOP331_MSG_ERR	IOP331_IRQ(62)  // 30
 #define IRQ_IOP331_HPI		IOP331_IRQ(63)  // 31
 
-#define NR_IOP331_IRQS		(IOP331_IRQ(63) + 1)
-
-#define NR_IRQS			NR_IOP331_IRQS
+#define NR_IRQS			(IOP331_IRQ(63) + 1)
 
 
 /*
@@ -129,4 +127,4 @@
 #define	IRQ_IQ80332_INTC	IRQ_IOP331_XINT2
 #define	IRQ_IQ80332_INTD	IRQ_IOP331_XINT3
 
-#endif // _IOP331_IRQ_H_
+#endif // _IRQ_H_

include/asm-arm/arch-iop33x/memory.h

@@ -0,0 +1,26 @@
+/*
+ * linux/include/asm-arm/arch-iop33x/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+
+/*
+ * Virtual view <-> PCI DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	(((__virt_to_phys(x)) & ~(*IOP331_IATVR2)) | ((*IOP331_IABAR2) & 0xfffffff0))
+#define __bus_to_virt(x)    (__phys_to_virt(((x) & ~(*IOP331_IALR2)) | ( *IOP331_IATVR2)))
+
+
+#endif

include/asm-arm/arch-iop33x/system.h

@@ -0,0 +1,29 @@
+/*
+ * linux/include/asm-arm/arch-iop33x/system.h
+ *
+ *  Copyright (C) 2001 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+
+static inline void arch_reset(char mode)
+{
+    *IOP331_PCSR = 0x30;
+
+	if ( 1 && mode == 's') {
+		/* Jump into ROM at address 0 */
+		cpu_reset(0);
+	} else {
+		/* No on-chip reset capability */
+		cpu_reset(0);
+	}
+}
+

include/asm-arm/arch-iop33x/timex.h

@@ -0,0 +1,8 @@
+/*
+ * linux/include/asm-arm/arch-iop33x/timex.h
+ *
+ * IOP3xx architecture timex specifications
+ */
+#include <asm/hardware.h>
+
+#define CLOCK_TICK_RATE IOP331_TICK_RATE

include/asm-arm/arch-iop33x/uncompress.h

@@ -0,0 +1,36 @@
+/*
+ *  linux/include/asm-arm/arch-iop33x/uncompress.h
+ */
+#include <asm/types.h>
+#include <asm/mach-types.h>
+#include <linux/serial_reg.h>
+#include <asm/hardware.h>
+
+static volatile u32 *uart_base;
+
+#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
+
+static inline void putc(char c)
+{
+	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+		barrier();
+	*uart_base = c;
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+	if (machine_is_iq80331() || machine_is_iq80332())
+		uart_base = (volatile u32 *)IOP331_UART0_PHYS;
+	else
+		uart_base = (volatile u32 *)0xfe800000;
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
+#define arch_decomp_wdog()

include/asm-arm/arch-iop33x/vmalloc.h

@@ -0,0 +1,16 @@
+/*
+ * linux/include/asm-arm/arch-iop33x/vmalloc.h
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+//#define VMALLOC_END       (0xe8000000)
+/* increase usable physical RAM to ~992M per RMK */
+#define VMALLOC_END       (0xfe000000)
+

include/asm-arm/arch-iop3xx/debug-macro.S

@@ -1,35 +0,0 @@
-/* linux/include/asm-arm/arch-iop3xx/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mov	\rx, #0xfe000000	@ physical
-#if defined(CONFIG_ARCH_IQ80321) || defined(CONFIG_ARCH_IQ31244)
-		orr	\rx, \rx, #0x00800000	@ location of the UART
-#elif defined(CONFIG_ARCH_IOP33X)
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x000fe000	@ Physical Base
-		movne	\rx, #0
-		orr	\rx, \rx, #0xfe000000
-		orr	\rx, \rx, #0x00f00000	@ Virtual Base
-		orr	\rx, \rx, #0x00001700   @ location of the UART
-#else
-#error Unknown IOP3XX implementation
-#endif
-		.endm
-
-#if !defined(CONFIG_ARCH_IQ80321) || !defined(CONFIG_ARCH_IQ31244) || !defined(CONFIG_ARCH_IQ80331)
-#define FLOW_CONTROL
-#endif
-#define UART_SHIFT	0
-#include <asm/hardware/debug-8250.S>

include/asm-arm/arch-iop3xx/irqs.h

@@ -1,21 +0,0 @@
-/*
- * linux/include/asm-arm/arch-iop3xx/irqs.h
- *
- * Copyright:	(C) 2001-2003 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-/*
- * Chipset-specific bits
- */
-#ifdef CONFIG_ARCH_IOP32X
-#include "iop321-irqs.h"
-#endif
-
-#ifdef CONFIG_ARCH_IOP33X
-#include "iop331-irqs.h"
-#endif

include/asm-arm/arch-iop3xx/timex.h

@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-iop3xx/timex.h
- *
- * IOP3xx architecture timex specifications
- */
-#include <asm/hardware.h>
-
-#if defined(CONFIG_ARCH_IQ80321) || defined(CONFIG_ARCH_IQ31244)
-
-#define CLOCK_TICK_RATE IOP321_TICK_RATE
-
-#elif defined(CONFIG_ARCH_IQ80331) || defined(CONFIG_MACH_IQ80332)
-
-#define CLOCK_TICK_RATE IOP331_TICK_RATE
-
-#else
-
-#error "No IOP3xx timex information for this architecture"
-
-#endif

include/asm-arm/arch-iop3xx/uncompress.h

@@ -1,48 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-iop3xx/uncompress.h
- */
-#include <asm/types.h>
-#include <asm/mach-types.h>
-#include <linux/serial_reg.h>
-#include <asm/hardware.h>
-
-#ifdef CONFIG_ARCH_IOP32X
-#define UTYPE unsigned char *
-#elif defined(CONFIG_ARCH_IOP33X)
-#define UTYPE u32 *
-#else
-#error "Missing IOP3xx arch type def"
-#endif
-
-static volatile UTYPE uart_base;
-
-#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
-
-static inline void putc(char c)
-{
-	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
-		barrier();
-	*uart_base = c;
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
-        if(machine_is_iq80321())
-			uart_base = (volatile UTYPE)IQ80321_UART;
-		else if(machine_is_iq31244())
-			uart_base = (volatile UTYPE)IQ31244_UART;
-		else if(machine_is_iq80331() || machine_is_iq80332())
-			uart_base = (volatile UTYPE)IOP331_UART0_PHYS;
-		else
-			uart_base = (volatile UTYPE)0xfe800000;
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()