Merge tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael J Wysocki:

 - ARM big.LITTLE cpufreq driver from Viresh Kumar.

 - exynos5440 cpufreq driver from Amit Daniel Kachhap.

 - cpufreq core cleanup and code consolidation from Viresh Kumar and
   Stratos Karafotis.

 - cpufreq scalability improvement from Nathan Zimmer.

 - AMD "frequency sensitivity feedback" powersave bias for the ondemand
   cpufreq governor from Jacob Shin.

 - cpuidle code consolidation and cleanups from Daniel Lezcano.

 - ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano.

 - ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim, Lv
   Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto.

 - ACPI core updates related to hotplug from Toshi Kani, Paul Bolle,
   Yasuaki Ishimatsu, and Rafael J Wysocki.

 - Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements from
   Rafael J Wysocki and Andy Shevchenko.

* tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (192 commits)
  cpufreq: Revert incorrect commit 5800043
  cpufreq: MAINTAINERS: Add co-maintainer
  cpuidle: add maintainer entry
  ACPI / thermal: do not always return THERMAL_TREND_RAISING for active trip points
  ARM: s3c64xx: cpuidle: use init/exit common routine
  cpufreq: pxa2xx: initialize variables
  ACPI: video: correct acpi_video_bus_add error processing
  SH: cpuidle: use init/exit common routine
  ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y
  ACPI: Fix wrong parameter passed to memblock_reserve
  cpuidle: fix comment format
  pnp: use %*phC to dump small buffers
  isapnp: remove debug leftovers
  ARM: imx: cpuidle: use init/exit common routine
  ARM: davinci: cpuidle: use init/exit common routine
  ARM: kirkwood: cpuidle: use init/exit common routine
  ARM: calxeda: cpuidle: use init/exit common routine
  ARM: tegra: cpuidle: use init/exit common routine for tegra3
  ARM: tegra: cpuidle: use init/exit common routine for tegra2
  ARM: OMAP4: cpuidle: use init/exit common routine
  ...

Documentation/ABI/testing/sysfs-devices-lpss_ltr

@@ -0,0 +1,44 @@
+What:		/sys/devices/.../lpss_ltr/
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/ directory is only present for
+		devices included into the Intel Lynxpoint Low Power Subsystem
+		(LPSS).  If present, it contains attributes containing the LTR
+		mode and the values of LTR registers of the device.
+
+What:		/sys/devices/.../lpss_ltr/ltr_mode
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/ltr_mode attribute contains an
+		integer number (0 or 1) indicating whether or not the devices'
+		LTR functionality is working in the software mode (1).
+
+		This attribute is read-only.  If the device's runtime PM status
+		is not "active", attempts to read from this attribute cause
+		-EAGAIN to be returned.
+
+What:		/sys/devices/.../lpss_ltr/auto_ltr
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/auto_ltr attribute contains the
+		current value of the device's AUTO_LTR register (raw)
+		represented as an 8-digit hexadecimal number.
+
+		This attribute is read-only.  If the device's runtime PM status
+		is not "active", attempts to read from this attribute cause
+		-EAGAIN to be returned.
+
+What:		/sys/devices/.../lpss_ltr/sw_ltr
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/auto_ltr attribute contains the
+		current value of the device's SW_LTR register (raw) represented
+		as an 8-digit hexadecimal number.
+
+		This attribute is read-only.  If the device's runtime PM status
+		is not "active", attempts to read from this attribute cause
+		-EAGAIN to be returned.

Documentation/ABI/testing/sysfs-devices-power_resources_wakeup

@@ -0,0 +1,13 @@
+What:		/sys/devices/.../power_resources_wakeup/
+Date:		April 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_wakeup/ directory is only
+		present for device objects representing ACPI device nodes that
+		require ACPI power resources for wakeup signaling.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be able to signal wakeup.  The names of
+		the links are the same as the names of the directories they
+		point to.

Documentation/ABI/testing/sysfs-firmware-acpi

@@ -18,6 +18,32 @@ Description:
 		yoffset: The number of pixels between the top of the screen
 			 and the top edge of the image.
 
+What:		/sys/firmware/acpi/hotplug/
+Date:		February 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		There are separate hotplug profiles for different classes of
+		devices supported by ACPI, such as containers, memory modules,
+		processors, PCI root bridges etc.  A hotplug profile for a given
+		class of devices is a collection of settings defining the way
+		that class of devices will be handled by the ACPI core hotplug
+		code.  Those profiles are represented in sysfs as subdirectories
+		of /sys/firmware/acpi/hotplug/.
+
+		The following setting is available to user space for each
+		hotplug profile:
+
+		enabled: If set, the ACPI core will handle notifications of
+			hotplug events associated with the given class of
+			devices and will allow those devices to be ejected with
+			the help of the _EJ0 control method.  Unsetting it
+			effectively disables hotplug for the correspoinding
+			class of devices.
+
+		The value of the above attribute is an integer number: 1 (set)
+		or 0 (unset).  Attempts to write any other values to it will
+		cause -EINVAL to be returned.
+
 What:		/sys/firmware/acpi/interrupts/
 Date:		February 2008
 Contact:	Len Brown <lenb@kernel.org>

Documentation/cpu-freq/cpu-drivers.txt

@@ -108,8 +108,9 @@ policy->governor		must contain the "default policy" for
 				cpufreq_driver.target is called with
 				these values.
 
-For setting some of these values, the frequency table helpers might be
-helpful. See the section 2 for more information on them.
+For setting some of these values (cpuinfo.min[max]_freq, policy->min[max]), the
+frequency table helpers might be helpful. See the section 2 for more information
+on them.
 
 SMP systems normally have same clock source for a group of cpus. For these the
 .init() would be called only once for the first online cpu. Here the .init()
@@ -184,10 +185,10 @@ the reference implementation in drivers/cpufreq/longrun.c
 As most cpufreq processors only allow for being set to a few specific
 frequencies, a "frequency table" with some functions might assist in
 some work of the processor driver. Such a "frequency table" consists
-of an array of struct cpufreq_freq_table entries, with any value in
+of an array of struct cpufreq_frequency_table entries, with any value in
 "index" you want to use, and the corresponding frequency in
 "frequency". At the end of the table, you need to add a
-cpufreq_freq_table entry with frequency set to CPUFREQ_TABLE_END. And
+cpufreq_frequency_table entry with frequency set to CPUFREQ_TABLE_END. And
 if you want to skip one entry in the table, set the frequency to 
 CPUFREQ_ENTRY_INVALID. The entries don't need to be in ascending
 order.

Documentation/cpu-freq/governors.txt

@@ -167,6 +167,27 @@ of load evaluation and helping the CPU stay at its top speed when truly
 busy, rather than shifting back and forth in speed. This tunable has no
 effect on behavior at lower speeds/lower CPU loads.
 
+powersave_bias: this parameter takes a value between 0 to 1000. It
+defines the percentage (times 10) value of the target frequency that
+will be shaved off of the target. For example, when set to 100 -- 10%,
+when ondemand governor would have targeted 1000 MHz, it will target
+1000 MHz - (10% of 1000 MHz) = 900 MHz instead. This is set to 0
+(disabled) by default.
+When AMD frequency sensitivity powersave bias driver --
+drivers/cpufreq/amd_freq_sensitivity.c is loaded, this parameter
+defines the workload frequency sensitivity threshold in which a lower
+frequency is chosen instead of ondemand governor's original target.
+The frequency sensitivity is a hardware reported (on AMD Family 16h
+Processors and above) value between 0 to 100% that tells software how
+the performance of the workload running on a CPU will change when
+frequency changes. A workload with sensitivity of 0% (memory/IO-bound)
+will not perform any better on higher core frequency, whereas a
+workload with sensitivity of 100% (CPU-bound) will perform better
+higher the frequency. When the driver is loaded, this is set to 400
+by default -- for CPUs running workloads with sensitivity value below
+40%, a lower frequency is chosen. Unloading the driver or writing 0
+will disable this feature.
+
 
 2.5 Conservative
 ----------------
@@ -191,6 +212,12 @@ governor but for the opposite direction.  For example when set to its
 default value of '20' it means that if the CPU usage needs to be below
 20% between samples to have the frequency decreased.
 
+sampling_down_factor: similar functionality as in "ondemand" governor.
+But in "conservative", it controls the rate at which the kernel makes
+a decision on when to decrease the frequency while running in any
+speed. Load for frequency increase is still evaluated every
+sampling rate.
+
 3. The Governor Interface in the CPUfreq Core
 =============================================
 

Documentation/cpuidle/driver.txt

@@ -15,11 +15,17 @@ has mechanisms in place to support actual entry-exit into CPU idle states.
 cpuidle driver initializes the cpuidle_device structure for each CPU device
 and registers with cpuidle using cpuidle_register_device.
 
+If all the idle states are the same, the wrapper function cpuidle_register
+could be used instead.
+
 It can also support the dynamic changes (like battery <-> AC), by using
 cpuidle_pause_and_lock, cpuidle_disable_device and cpuidle_enable_device,
 cpuidle_resume_and_unlock.
 
 Interfaces:
+extern int cpuidle_register(struct cpuidle_driver *drv,
+                            const struct cpumask *const coupled_cpus);
+extern int cpuidle_unregister(struct cpuidle_driver *drv);
 extern int cpuidle_register_driver(struct cpuidle_driver *drv);
 extern void cpuidle_unregister_driver(struct cpuidle_driver *drv);
 extern int cpuidle_register_device(struct cpuidle_device *dev);

Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt

@@ -0,0 +1,65 @@
+Generic ARM big LITTLE cpufreq driver's DT glue
+-----------------------------------------------
+
+This is DT specific glue layer for generic cpufreq driver for big LITTLE
+systems.
+
+Both required and optional properties listed below must be defined
+under node /cpus/cpu@x. Where x is the first cpu inside a cluster.
+
+FIXME: Cpus should boot in the order specified in DT and all cpus for a cluster
+must be present contiguously. Generic DT driver will check only node 'x' for
+cpu:x.
+
+Required properties:
+- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt
+  for details
+
+Optional properties:
+- clock-latency: Specify the possible maximum transition latency for clock,
+  in unit of nanoseconds.
+
+Examples:
+
+cpus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	cpu@0 {
+		compatible = "arm,cortex-a15";
+		reg = <0>;
+		next-level-cache = <&L2>;
+		operating-points = <
+			/* kHz    uV */
+			792000  1100000
+			396000  950000
+			198000  850000
+		>;
+		clock-latency = <61036>; /* two CLK32 periods */
+	};
+
+	cpu@1 {
+		compatible = "arm,cortex-a15";
+		reg = <1>;
+		next-level-cache = <&L2>;
+	};
+
+	cpu@100 {
+		compatible = "arm,cortex-a7";
+		reg = <100>;
+		next-level-cache = <&L2>;
+		operating-points = <
+			/* kHz    uV */
+			792000  950000
+			396000  750000
+			198000  450000
+		>;
+		clock-latency = <61036>; /* two CLK32 periods */
+	};
+
+	cpu@101 {
+		compatible = "arm,cortex-a7";
+		reg = <101>;
+		next-level-cache = <&L2>;
+	};
+};

Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt

@@ -32,7 +32,7 @@ cpus {
 			396000  950000
 			198000  850000
 		>;
-		transition-latency = <61036>; /* two CLK32 periods */
+		clock-latency = <61036>; /* two CLK32 periods */
 	};
 
 	cpu@1 {

Documentation/devicetree/bindings/cpufreq/cpufreq-exynos5440.txt

@@ -0,0 +1,28 @@
+
+Exynos5440 cpufreq driver
+-------------------
+
+Exynos5440 SoC cpufreq driver for CPU frequency scaling.
+
+Required properties:
+- interrupts: Interrupt to know the completion of cpu frequency change.
+- operating-points: Table of frequencies and voltage CPU could be transitioned into,
+	in the decreasing order. Frequency should be in KHz units and voltage
+	should be in microvolts.
+
+Optional properties:
+- clock-latency: Clock monitor latency in microsecond.
+
+All the required listed above must be defined under node cpufreq.
+
+Example:
+--------
+	cpufreq@160000 {
+		compatible = "samsung,exynos5440-cpufreq";
+		reg = <0x160000 0x1000>;
+		interrupts = <0 57 0>;
+		operating-points = <
+				1000000 975000
+				800000  925000>;
+		clock-latency = <100000>;
+	};

MAINTAINERS

@@ -2203,12 +2203,34 @@ F:	drivers/net/ethernet/ti/cpmac.c
 
 CPU FREQUENCY DRIVERS
 M:	Rafael J. Wysocki <rjw@sisk.pl>
+M:	Viresh Kumar <viresh.kumar@linaro.org>
 L:	cpufreq@vger.kernel.org
 L:	linux-pm@vger.kernel.org
 S:	Maintained
+T:	git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
 F:	drivers/cpufreq/
 F:	include/linux/cpufreq.h
 
+CPU FREQUENCY DRIVERS - ARM BIG LITTLE
+M:	Viresh Kumar <viresh.kumar@linaro.org>
+M:	Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
+L:	cpufreq@vger.kernel.org
+L:	linux-pm@vger.kernel.org
+W:	http://www.arm.com/products/processors/technologies/biglittleprocessing.php
+S:	Maintained
+F:	drivers/cpufreq/arm_big_little.h
+F:	drivers/cpufreq/arm_big_little.c
+F:	drivers/cpufreq/arm_big_little_dt.c
+
+CPUIDLE DRIVERS
+M:	Rafael J. Wysocki <rjw@sisk.pl>
+M:	Daniel Lezcano <daniel.lezcano@linaro.org>
+L:	linux-pm@vger.kernel.org
+S:	Maintained
+T:	git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
+F:	drivers/cpuidle/*
+F:	include/linux/cpuidle.h
+
 CPUID/MSR DRIVER
 M:	"H. Peter Anvin" <hpa@zytor.com>
 S:	Maintained

arch/arm/Kconfig

@@ -2163,7 +2163,6 @@ endmenu
 menu "CPU Power Management"
 
 if ARCH_HAS_CPUFREQ
-
 source "drivers/cpufreq/Kconfig"
 
 config CPU_FREQ_IMX
@@ -2173,30 +2172,6 @@ config CPU_FREQ_IMX
 	help
 	  This enables the CPUfreq driver for i.MX CPUs.
 
-config CPU_FREQ_SA1100
-	bool
-
-config CPU_FREQ_SA1110
-	bool
-
-config CPU_FREQ_INTEGRATOR
-	tristate "CPUfreq driver for ARM Integrator CPUs"
-	depends on ARCH_INTEGRATOR && CPU_FREQ
-	default y
-	help
-	  This enables the CPUfreq driver for ARM Integrator CPUs.
-
-	  For details, take a look at <file:Documentation/cpu-freq>.
-
-	  If in doubt, say Y.
-
-config CPU_FREQ_PXA
-	bool
-	depends on CPU_FREQ && ARCH_PXA && PXA25x
-	default y
-	select CPU_FREQ_DEFAULT_GOV_USERSPACE
-	select CPU_FREQ_TABLE
-
 config CPU_FREQ_S3C
 	bool
 	help

arch/arm/configs/kirkwood_defconfig

@@ -56,7 +56,6 @@ CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_KIRKWOOD=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y

arch/arm/mach-at91/cpuidle.c

@@ -27,8 +27,6 @@
 
 #define AT91_MAX_STATES	2
 
-static DEFINE_PER_CPU(struct cpuidle_device, at91_cpuidle_device);
-
 /* Actual code that puts the SoC in different idle states */
 static int at91_enter_idle(struct cpuidle_device *dev,
 			struct cpuidle_driver *drv,
@@ -47,7 +45,6 @@ static int at91_enter_idle(struct cpuidle_device *dev,
 static struct cpuidle_driver at91_idle_driver = {
 	.name			= "at91_idle",
 	.owner			= THIS_MODULE,
-	.en_core_tk_irqen	= 1,
 	.states[0]		= ARM_CPUIDLE_WFI_STATE,
 	.states[1]		= {
 		.enter			= at91_enter_idle,
@@ -61,20 +58,9 @@ static struct cpuidle_driver at91_idle_driver = {
 };
 
 /* Initialize CPU idle by registering the idle states */
-static int at91_init_cpuidle(void)
+static int __init at91_init_cpuidle(void)
 {
-	struct cpuidle_device *device;
-
-	device = &per_cpu(at91_cpuidle_device, smp_processor_id());
-	device->state_count = AT91_MAX_STATES;
-
-	cpuidle_register_driver(&at91_idle_driver);
-
-	if (cpuidle_register_device(device)) {
-		printk(KERN_ERR "at91_init_cpuidle: Failed registering\n");
-		return -EIO;
-	}
-	return 0;
+	return cpuidle_register(&at91_idle_driver, NULL);
 }
 
 device_initcall(at91_init_cpuidle);

arch/arm/mach-davinci/Makefile

@@ -37,7 +37,6 @@ obj-$(CONFIG_MACH_MITYOMAPL138)		+= board-mityomapl138.o
 obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD)	+= board-omapl138-hawk.o
 
 # Power Management
-obj-$(CONFIG_CPU_FREQ)			+= cpufreq.o
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
 obj-$(CONFIG_SUSPEND)			+= pm.o sleep.o
 obj-$(CONFIG_HAVE_CLK)			+= pm_domain.o

arch/arm/mach-davinci/cpuidle.c

@@ -25,7 +25,6 @@
 
 #define DAVINCI_CPUIDLE_MAX_STATES	2
 
-static DEFINE_PER_CPU(struct cpuidle_device, davinci_cpuidle_device);
 static void __iomem *ddr2_reg_base;
 static bool ddr2_pdown;
 
@@ -50,14 +49,10 @@ static void davinci_save_ddr_power(int enter, bool pdown)
 
 /* Actual code that puts the SoC in different idle states */
 static int davinci_enter_idle(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-						int index)
+			      struct cpuidle_driver *drv, int index)
 {
 	davinci_save_ddr_power(1, ddr2_pdown);
-
-	index = cpuidle_wrap_enter(dev,	drv, index,
-				arm_cpuidle_simple_enter);
-
+	cpu_do_idle();
 	davinci_save_ddr_power(0, ddr2_pdown);
 
 	return index;
@@ -66,7 +61,6 @@ static int davinci_enter_idle(struct cpuidle_device *dev,
 static struct cpuidle_driver davinci_idle_driver = {
 	.name			= "cpuidle-davinci",
 	.owner			= THIS_MODULE,
-	.en_core_tk_irqen	= 1,
 	.states[0]		= ARM_CPUIDLE_WFI_STATE,
 	.states[1]		= {
 		.enter			= davinci_enter_idle,
@@ -81,12 +75,8 @@ static struct cpuidle_driver davinci_idle_driver = {
 
 static int __init davinci_cpuidle_probe(struct platform_device *pdev)
 {
-	int ret;
-	struct cpuidle_device *device;
 	struct davinci_cpuidle_config *pdata = pdev->dev.platform_data;
 
-	device = &per_cpu(davinci_cpuidle_device, smp_processor_id());
-
 	if (!pdata) {
 		dev_err(&pdev->dev, "cannot get platform data\n");
 		return -ENOENT;
@@ -96,20 +86,7 @@ static int __init davinci_cpuidle_probe(struct platform_device *pdev)
 
 	ddr2_pdown = pdata->ddr2_pdown;
 
-	ret = cpuidle_register_driver(&davinci_idle_driver);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register driver\n");
-		return ret;
-	}
-
-	ret = cpuidle_register_device(device);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register device\n");
-		cpuidle_unregister_driver(&davinci_idle_driver);
-		return ret;
-	}
-
-	return 0;
+	return cpuidle_register(&davinci_idle_driver, NULL);
 }
 
 static struct platform_driver davinci_cpuidle_driver = {

arch/arm/mach-exynos/Kconfig

@@ -72,10 +72,12 @@ config SOC_EXYNOS5440
 	bool "SAMSUNG EXYNOS5440"
 	default y
 	depends on ARCH_EXYNOS5
+	select ARCH_HAS_OPP
 	select ARM_ARCH_TIMER
 	select AUTO_ZRELADDR
 	select PINCTRL
 	select PINCTRL_EXYNOS5440
+	select PM_OPP
 	help
 	  Enable EXYNOS5440 SoC support
 

arch/arm/mach-exynos/cpuidle.c

@@ -58,7 +58,6 @@ static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device);
 static struct cpuidle_driver exynos4_idle_driver = {
 	.name			= "exynos4_idle",
 	.owner			= THIS_MODULE,
-	.en_core_tk_irqen	= 1,
 };
 
 /* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */

arch/arm/mach-imx/Makefile

@@ -30,7 +30,7 @@ obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
 obj-$(CONFIG_CPU_FREQ_IMX)    += cpufreq.o
 
 ifeq ($(CONFIG_CPU_IDLE),y)
-obj-y += cpuidle.o
+obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o
 obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o
 endif
 

arch/arm/mach-imx/cpufreq.c

@@ -87,13 +87,12 @@ static int mxc_set_target(struct cpufreq_policy *policy,
 
 	freqs.old = clk_get_rate(cpu_clk) / 1000;
 	freqs.new = freq_Hz / 1000;
-	freqs.cpu = 0;
 	freqs.flags = 0;
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 
 	ret = set_cpu_freq(freq_Hz);
 
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 
 	return ret;
 }
@@ -145,14 +144,11 @@ static int mxc_cpufreq_init(struct cpufreq_policy *policy)
 	imx_freq_table[i].frequency = CPUFREQ_TABLE_END;
 
 	policy->cur = clk_get_rate(cpu_clk) / 1000;
-	policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min;
-	policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max;
 
 	/* Manual states, that PLL stabilizes in two CLK32 periods */
 	policy->cpuinfo.transition_latency = 2 * NANOSECOND / CLK32_FREQ;
 
 	ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table);
-
 	if (ret < 0) {
 		printk(KERN_ERR "%s: failed to register i.MXC CPUfreq with error code %d\n",
 		       __func__, ret);

arch/arm/mach-imx/cpuidle-imx5.c

@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/cpuidle.h>
+#include <linux/module.h>
+#include <asm/system_misc.h>
+
+static int imx5_cpuidle_enter(struct cpuidle_device *dev,
+			      struct cpuidle_driver *drv, int index)
+{
+	arm_pm_idle();
+	return index;
+}
+
+static struct cpuidle_driver imx5_cpuidle_driver = {
+	.name             = "imx5_cpuidle",
+	.owner            = THIS_MODULE,
+	.states[0] = {
+		.enter            = imx5_cpuidle_enter,
+		.exit_latency     = 2,
+		.target_residency = 1,
+		.flags            = CPUIDLE_FLAG_TIME_VALID,
+		.name             = "IMX5 SRPG",
+		.desc             = "CPU state retained,powered off",
+	},
+	.state_count = 1,
+};
+
+int __init imx5_cpuidle_init(void)
+{
+	return cpuidle_register(&imx5_cpuidle_driver, NULL);
+}

arch/arm/mach-imx/cpuidle-imx6q.c

@@ -6,7 +6,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/clockchips.h>
 #include <linux/cpuidle.h>
 #include <linux/module.h>
 #include <asm/cpuidle.h>
@@ -21,10 +20,6 @@ static DEFINE_SPINLOCK(master_lock);
 static int imx6q_enter_wait(struct cpuidle_device *dev,
 			    struct cpuidle_driver *drv, int index)
 {
-	int cpu = dev->cpu;
-
-	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
-
 	if (atomic_inc_return(&master) == num_online_cpus()) {
 		/*
 		 * With this lock, we prevent other cpu to exit and enter
@@ -43,26 +38,13 @@ idle:
 	cpu_do_idle();
 done:
 	atomic_dec(&master);
-	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
 
 	return index;
 }
 
-/*
- * For each cpu, setup the broadcast timer because local timer
- * stops for the states other than WFI.
- */
-static void imx6q_setup_broadcast_timer(void *arg)
-{
-	int cpu = smp_processor_id();
-
-	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu);
-}
-
 static struct cpuidle_driver imx6q_cpuidle_driver = {
 	.name = "imx6q_cpuidle",
 	.owner = THIS_MODULE,
-	.en_core_tk_irqen = 1,
 	.states = {
 		/* WFI */
 		ARM_CPUIDLE_WFI_STATE,
@@ -70,7 +52,8 @@ static struct cpuidle_driver imx6q_cpuidle_driver = {
 		{
 			.exit_latency = 50,
 			.target_residency = 75,
-			.flags = CPUIDLE_FLAG_TIME_VALID,
+			.flags = CPUIDLE_FLAG_TIME_VALID |
+			         CPUIDLE_FLAG_TIMER_STOP,
 			.enter = imx6q_enter_wait,
 			.name = "WAIT",
 			.desc = "Clock off",
@@ -88,8 +71,5 @@ int __init imx6q_cpuidle_init(void)
 	/* Set chicken bit to get a reliable WAIT mode support */
 	imx6q_set_chicken_bit();
 
-	/* Configure the broadcast timer on each cpu */
-	on_each_cpu(imx6q_setup_broadcast_timer, NULL, 1);
-
-	return imx_cpuidle_init(&imx6q_cpuidle_driver);
+	return cpuidle_register(&imx6q_cpuidle_driver, NULL);
 }

arch/arm/mach-imx/cpuidle.c

@@ -1,80 +0,0 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2012 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/cpuidle.h>
-#include <linux/err.h>
-#include <linux/hrtimer.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-
-static struct cpuidle_device __percpu * imx_cpuidle_devices;
-
-static void __init imx_cpuidle_devices_uninit(void)
-{
-	int cpu_id;
-	struct cpuidle_device *dev;
-
-	for_each_possible_cpu(cpu_id) {
-		dev = per_cpu_ptr(imx_cpuidle_devices, cpu_id);
-		cpuidle_unregister_device(dev);
-	}
-
-	free_percpu(imx_cpuidle_devices);
-}
-
-int __init imx_cpuidle_init(struct cpuidle_driver *drv)
-{
-	struct cpuidle_device *dev;
-	int cpu_id, ret;
-
-	if (drv->state_count > CPUIDLE_STATE_MAX) {
-		pr_err("%s: state_count exceeds maximum\n", __func__);
-		return -EINVAL;
-	}
-
-	ret = cpuidle_register_driver(drv);
-	if (ret) {
-		pr_err("%s: Failed to register cpuidle driver with error: %d\n",
-			 __func__, ret);
-		return ret;
-	}
-
-	imx_cpuidle_devices = alloc_percpu(struct cpuidle_device);
-	if (imx_cpuidle_devices == NULL) {
-		ret = -ENOMEM;
-		goto unregister_drv;
-	}
-
-	/* initialize state data for each cpuidle_device */
-	for_each_possible_cpu(cpu_id) {
-		dev = per_cpu_ptr(imx_cpuidle_devices, cpu_id);
-		dev->cpu = cpu_id;
-		dev->state_count = drv->state_count;
-
-		ret = cpuidle_register_device(dev);
-		if (ret) {
-			pr_err("%s: Failed to register cpu %u, error: %d\n",
-				__func__, cpu_id, ret);
-			goto uninit;
-		}
-	}
-
-	return 0;
-
-uninit:
-	imx_cpuidle_devices_uninit();
-
-unregister_drv:
-	cpuidle_unregister_driver(drv);
-	return ret;
-}

arch/arm/mach-imx/cpuidle.h

@@ -10,18 +10,16 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include <linux/cpuidle.h>
-
 #ifdef CONFIG_CPU_IDLE
-extern int imx_cpuidle_init(struct cpuidle_driver *drv);
+extern int imx5_cpuidle_init(void);
 extern int imx6q_cpuidle_init(void);
 #else
-static inline int imx_cpuidle_init(struct cpuidle_driver *drv)
+static inline int imx5_cpuidle_init(void)
 {
-	return -ENODEV;
+	return 0;
 }
 static inline int imx6q_cpuidle_init(void)
 {
-	return -ENODEV;
+	return 0;
 }
 #endif

arch/arm/mach-imx/pm-imx5.c

@@ -149,33 +149,6 @@ static void imx5_pm_idle(void)
 	imx5_cpu_do_idle();
 }
 
-static int imx5_cpuidle_enter(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv, int idx)
-{
-	int ret;
-
-	ret = imx5_cpu_do_idle();
-	if (ret < 0)
-		return ret;
-
-	return idx;
-}
-
-static struct cpuidle_driver imx5_cpuidle_driver = {
-	.name			= "imx5_cpuidle",
-	.owner			= THIS_MODULE,
-	.en_core_tk_irqen	= 1,
-	.states[0]	= {
-		.enter			= imx5_cpuidle_enter,
-		.exit_latency		= 2,
-		.target_residency	= 1,
-		.flags			= CPUIDLE_FLAG_TIME_VALID,
-		.name			= "IMX5 SRPG",
-		.desc			= "CPU state retained,powered off",
-	},
-	.state_count		= 1,
-};
-
 static int __init imx5_pm_common_init(void)
 {
 	int ret;
@@ -193,8 +166,7 @@ static int __init imx5_pm_common_init(void)
 	/* Set the registers to the default cpu idle state. */
 	mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE);
 
-	imx_cpuidle_init(&imx5_cpuidle_driver);
-	return 0;
+	return imx5_cpuidle_init();
 }
 
 void __init imx51_pm_init(void)

arch/arm/mach-integrator/Makefile

@@ -9,5 +9,4 @@ obj-$(CONFIG_ARCH_INTEGRATOR_AP)	+= integrator_ap.o
 obj-$(CONFIG_ARCH_INTEGRATOR_CP)	+= integrator_cp.o
 
 obj-$(CONFIG_PCI)			+= pci_v3.o pci.o
-obj-$(CONFIG_CPU_FREQ_INTEGRATOR)	+= cpu.o
 obj-$(CONFIG_INTEGRATOR_IMPD1)		+= impd1.o

arch/arm/mach-omap2/common.h

@@ -249,7 +249,6 @@ extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state);
 extern int omap4_finish_suspend(unsigned long cpu_state);
 extern void omap4_cpu_resume(void);
 extern int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state);
-extern u32 omap4_mpuss_read_prev_context_state(void);
 #else
 static inline int omap4_enter_lowpower(unsigned int cpu,
 					unsigned int power_state)
@@ -277,10 +276,6 @@ static inline int omap4_finish_suspend(unsigned long cpu_state)
 static inline void omap4_cpu_resume(void)
 {}
 
-static inline u32 omap4_mpuss_read_prev_context_state(void)
-{
-	return 0;
-}
 #endif
 
 struct omap_sdrc_params;

arch/arm/mach-omap2/cpuidle34xx.c

@@ -26,6 +26,7 @@
 #include <linux/cpuidle.h>
 #include <linux/export.h>
 #include <linux/cpu_pm.h>
+#include <asm/cpuidle.h>
 
 #include "powerdomain.h"
 #include "clockdomain.h"
@@ -99,11 +100,15 @@ static struct omap3_idle_statedata omap3_idle_data[] = {
 	},
 };
 
-/* Private functions */
-
-static int __omap3_enter_idle(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-				int index)
+/**
+ * omap3_enter_idle - Programs OMAP3 to enter the specified state
+ * @dev: cpuidle device
+ * @drv: cpuidle driver
+ * @index: the index of state to be entered
+ */
+static int omap3_enter_idle(struct cpuidle_device *dev,
+			    struct cpuidle_driver *drv,
+			    int index)
 {
 	struct omap3_idle_statedata *cx = &omap3_idle_data[index];
 
@@ -148,22 +153,6 @@ return_sleep_time:
 	return index;
 }
 
-/**
- * omap3_enter_idle - Programs OMAP3 to enter the specified state
- * @dev: cpuidle device
- * @drv: cpuidle driver
- * @index: the index of state to be entered
- *
- * Called from the CPUidle framework to program the device to the
- * specified target state selected by the governor.
- */
-static inline int omap3_enter_idle(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-				int index)
-{
-	return cpuidle_wrap_enter(dev, drv, index, __omap3_enter_idle);
-}
-
 /**
  * next_valid_state - Find next valid C-state
  * @dev: cpuidle device
@@ -271,11 +260,9 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
 	return ret;
 }
 
-static DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
-
 static struct cpuidle_driver omap3_idle_driver = {
-	.name =		"omap3_idle",
-	.owner =	THIS_MODULE,
+	.name             = "omap3_idle",
+	.owner            = THIS_MODULE,
 	.states = {
 		{
 			.enter		  = omap3_enter_idle_bm,
@@ -348,8 +335,6 @@ static struct cpuidle_driver omap3_idle_driver = {
  */
 int __init omap3_idle_init(void)
 {
-	struct cpuidle_device *dev;
-
 	mpu_pd = pwrdm_lookup("mpu_pwrdm");
 	core_pd = pwrdm_lookup("core_pwrdm");
 	per_pd = pwrdm_lookup("per_pwrdm");
@@ -358,16 +343,5 @@ int __init omap3_idle_init(void)
 	if (!mpu_pd || !core_pd || !per_pd || !cam_pd)
 		return -ENODEV;
 
-	cpuidle_register_driver(&omap3_idle_driver);
-
-	dev = &per_cpu(omap3_idle_dev, smp_processor_id());
-	dev->cpu = 0;
-
-	if (cpuidle_register_device(dev)) {
-		printk(KERN_ERR "%s: CPUidle register device failed\n",
-		       __func__);
-		return -EIO;
-	}
-
-	return 0;
+	return cpuidle_register(&omap3_idle_driver, NULL);
 }

arch/arm/mach-omap2/cpuidle44xx.c

@@ -1,7 +1,7 @@
 /*
- * OMAP4 CPU idle Routines
+ * OMAP4+ CPU idle Routines
  *
- * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2011-2013 Texas Instruments, Inc.
  * Santosh Shilimkar <santosh.shilimkar@ti.com>
  * Rajendra Nayak <rnayak@ti.com>
  *
@@ -14,8 +14,8 @@
 #include <linux/cpuidle.h>
 #include <linux/cpu_pm.h>
 #include <linux/export.h>
-#include <linux/clockchips.h>
 
+#include <asm/cpuidle.h>
 #include <asm/proc-fns.h>
 
 #include "common.h"
@@ -24,13 +24,13 @@
 #include "clockdomain.h"
 
 /* Machine specific information */
-struct omap4_idle_statedata {
+struct idle_statedata {
 	u32 cpu_state;
 	u32 mpu_logic_state;
 	u32 mpu_state;
 };
 
-static struct omap4_idle_statedata omap4_idle_data[] = {
+static struct idle_statedata omap4_idle_data[] = {
 	{
 		.cpu_state = PWRDM_POWER_ON,
 		.mpu_state = PWRDM_POWER_ON,
@@ -53,11 +53,12 @@ static struct clockdomain *cpu_clkdm[NR_CPUS];
 
 static atomic_t abort_barrier;
 static bool cpu_done[NR_CPUS];
+static struct idle_statedata *state_ptr = &omap4_idle_data[0];
 
 /* Private functions */
 
 /**
- * omap4_enter_idle_coupled_[simple/coupled] - OMAP4 cpuidle entry functions
+ * omap_enter_idle_[simple/coupled] - OMAP4PLUS cpuidle entry functions
  * @dev: cpuidle device
  * @drv: cpuidle driver
  * @index: the index of state to be entered
@@ -66,7 +67,7 @@ static bool cpu_done[NR_CPUS];
  * specified low power state selected by the governor.
  * Returns the amount of time spent in the low power state.
  */
-static int omap4_enter_idle_simple(struct cpuidle_device *dev,
+static int omap_enter_idle_simple(struct cpuidle_device *dev,
 			struct cpuidle_driver *drv,
 			int index)
 {
@@ -77,12 +78,11 @@ static int omap4_enter_idle_simple(struct cpuidle_device *dev,
 	return index;
 }
 
-static int omap4_enter_idle_coupled(struct cpuidle_device *dev,
+static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 			struct cpuidle_driver *drv,
 			int index)
 {
-	struct omap4_idle_statedata *cx = &omap4_idle_data[index];
-	int cpu_id = smp_processor_id();
+	struct idle_statedata *cx = state_ptr + index;
 
 	local_fiq_disable();
 
@@ -109,8 +109,6 @@ static int omap4_enter_idle_coupled(struct cpuidle_device *dev,
 		}
 	}
 
-	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id);
-
 	/*
 	 * Call idle CPU PM enter notifier chain so that
 	 * VFP and per CPU interrupt context is saved.
@@ -149,11 +147,10 @@ static int omap4_enter_idle_coupled(struct cpuidle_device *dev,
 	 * Call idle CPU cluster PM exit notifier chain
 	 * to restore GIC and wakeupgen context.
 	 */
-	if (omap4_mpuss_read_prev_context_state())
+	if ((cx->mpu_state == PWRDM_POWER_RET) &&
+		(cx->mpu_logic_state == PWRDM_POWER_OFF))
 		cpu_cluster_pm_exit();
 
-	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id);
-
 fail:
 	cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
 	cpu_done[dev->cpu] = false;
@@ -163,49 +160,38 @@ fail:
 	return index;
 }
 
-/*
- * For each cpu, setup the broadcast timer because local timers
- * stops for the states above C1.
- */
-static void omap_setup_broadcast_timer(void *arg)
-{
-	int cpu = smp_processor_id();
-	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu);
-}
-
-static DEFINE_PER_CPU(struct cpuidle_device, omap4_idle_dev);
-
 static struct cpuidle_driver omap4_idle_driver = {
 	.name				= "omap4_idle",
 	.owner				= THIS_MODULE,
-	.en_core_tk_irqen		= 1,
 	.states = {
 		{
 			/* C1 - CPU0 ON + CPU1 ON + MPU ON */
 			.exit_latency = 2 + 2,
 			.target_residency = 5,
 			.flags = CPUIDLE_FLAG_TIME_VALID,
-			.enter = omap4_enter_idle_simple,
+			.enter = omap_enter_idle_simple,
 			.name = "C1",
-			.desc = "MPUSS ON"
+			.desc = "CPUx ON, MPUSS ON"
 		},
 		{
 			/* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */
 			.exit_latency = 328 + 440,
 			.target_residency = 960,
-			.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
-			.enter = omap4_enter_idle_coupled,
+			.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED |
+			         CPUIDLE_FLAG_TIMER_STOP,
+			.enter = omap_enter_idle_coupled,
 			.name = "C2",
-			.desc = "MPUSS CSWR",
+			.desc = "CPUx OFF, MPUSS CSWR",
 		},
 		{
 			/* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
 			.exit_latency = 460 + 518,
 			.target_residency = 1100,
-			.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
-			.enter = omap4_enter_idle_coupled,
+			.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED |
+			         CPUIDLE_FLAG_TIMER_STOP,
+			.enter = omap_enter_idle_coupled,
 			.name = "C3",
-			.desc = "MPUSS OSWR",
+			.desc = "CPUx OFF, MPUSS OSWR",
 		},
 	},
 	.state_count = ARRAY_SIZE(omap4_idle_data),
@@ -215,16 +201,13 @@ static struct cpuidle_driver omap4_idle_driver = {
 /* Public functions */
 
 /**
- * omap4_idle_init - Init routine for OMAP4 idle
+ * omap4_idle_init - Init routine for OMAP4+ idle
  *
- * Registers the OMAP4 specific cpuidle driver to the cpuidle
+ * Registers the OMAP4+ specific cpuidle driver to the cpuidle
  * framework with the valid set of states.
  */
 int __init omap4_idle_init(void)
 {
-	struct cpuidle_device *dev;
-	unsigned int cpu_id = 0;
-
 	mpu_pd = pwrdm_lookup("mpu_pwrdm");
 	cpu_pd[0] = pwrdm_lookup("cpu0_pwrdm");
 	cpu_pd[1] = pwrdm_lookup("cpu1_pwrdm");
@@ -236,22 +219,5 @@ int __init omap4_idle_init(void)
 	if (!cpu_clkdm[0] || !cpu_clkdm[1])
 		return -ENODEV;
 
-	/* Configure the broadcast timer on each cpu */
-	on_each_cpu(omap_setup_broadcast_timer, NULL, 1);
-
-	for_each_cpu(cpu_id, cpu_online_mask) {
-		dev = &per_cpu(omap4_idle_dev, cpu_id);
-		dev->cpu = cpu_id;
-#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
-		dev->coupled_cpus = *cpu_online_mask;
-#endif
-		cpuidle_register_driver(&omap4_idle_driver);
-
-		if (cpuidle_register_device(dev)) {
-			pr_err("%s: CPUidle register failed\n", __func__);
-			return -EIO;
-		}
-	}
-
-	return 0;
+	return cpuidle_register(&omap4_idle_driver, cpu_online_mask);
 }

arch/arm/mach-omap2/omap-mpuss-lowpower.c

@@ -139,20 +139,6 @@ static inline void cpu_clear_prev_logic_pwrst(unsigned int cpu_id)
 	}
 }
 
-/**
- * omap4_mpuss_read_prev_context_state:
- * Function returns the MPUSS previous context state
- */
-u32 omap4_mpuss_read_prev_context_state(void)
-{
-	u32 reg;
-
-	reg = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
-		OMAP4430_PRM_MPU_INST, OMAP4_RM_MPU_MPU_CONTEXT_OFFSET);
-	reg &= OMAP4430_LOSTCONTEXT_DFF_MASK;
-	return reg;
-}
-
 /*
  * Store the CPU cluster state for L2X0 low power operations.
  */

arch/arm/mach-omap2/pm.c

@@ -264,6 +264,12 @@ static void __init omap4_init_voltages(void)
 	omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva");
 }
 
+static inline void omap_init_cpufreq(void)
+{
+	struct platform_device_info devinfo = { .name = "omap-cpufreq", };
+	platform_device_register_full(&devinfo);
+}
+
 static int __init omap2_common_pm_init(void)
 {
 	if (!of_have_populated_dt())
@@ -293,6 +299,9 @@ int __init omap2_common_pm_late_init(void)
 
 		/* Smartreflex device init */
 		omap_devinit_smartreflex();
+
+		/* cpufreq dummy device instantiation */
+		omap_init_cpufreq();
 	}
 
 #ifdef CONFIG_SUSPEND

arch/arm/mach-pxa/Makefile

@@ -7,12 +7,6 @@ obj-y				+= clock.o devices.o generic.o irq.o \
 				   time.o reset.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
 
-ifeq ($(CONFIG_CPU_FREQ),y)
-obj-$(CONFIG_PXA25x)		+= cpufreq-pxa2xx.o
-obj-$(CONFIG_PXA27x)		+= cpufreq-pxa2xx.o
-obj-$(CONFIG_PXA3xx)		+= cpufreq-pxa3xx.o
-endif
-
 # Generic drivers that other drivers may depend upon
 
 # SoC-specific code

arch/arm/mach-pxa/include/mach/generic.h

@@ -0,0 +1 @@
+#include "../../generic.h"

arch/arm/mach-s3c24xx/cpufreq.c

@@ -204,7 +204,6 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
 	freqs.old = cpu_cur.freq;
 	freqs.new = cpu_new.freq;
 
-	freqs.freqs.cpu = 0;
 	freqs.freqs.old = cpu_cur.freq.armclk / 1000;
 	freqs.freqs.new = cpu_new.freq.armclk / 1000;
 
@@ -218,9 +217,7 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
 	s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk);
 
 	/* start the frequency change */
-
-	if (policy)
-		cpufreq_notify_transition(&freqs.freqs, CPUFREQ_PRECHANGE);
+	cpufreq_notify_transition(policy, &freqs.freqs, CPUFREQ_PRECHANGE);
 
 	/* If hclk is staying the same, then we do not need to
 	 * re-write the IO or the refresh timings whilst we are changing
@@ -264,8 +261,7 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
 	local_irq_restore(flags);
 
 	/* notify everyone we've done this */
-	if (policy)
-		cpufreq_notify_transition(&freqs.freqs, CPUFREQ_POSTCHANGE);
+	cpufreq_notify_transition(policy, &freqs.freqs, CPUFREQ_POSTCHANGE);
 
 	s3c_freq_dbg("%s: finished\n", __func__);
 	return 0;

arch/arm/mach-s3c64xx/cpuidle.c

@@ -40,12 +40,9 @@ static int s3c64xx_enter_idle(struct cpuidle_device *dev,
 	return index;
 }
 
-static DEFINE_PER_CPU(struct cpuidle_device, s3c64xx_cpuidle_device);
-
 static struct cpuidle_driver s3c64xx_cpuidle_driver = {
 	.name	= "s3c64xx_cpuidle",
 	.owner  = THIS_MODULE,
-	.en_core_tk_irqen = 1,
 	.states = {
 		{
 			.enter            = s3c64xx_enter_idle,
@@ -61,16 +58,6 @@ static struct cpuidle_driver s3c64xx_cpuidle_driver = {
 
 static int __init s3c64xx_init_cpuidle(void)
 {
-	int ret;
-
-	cpuidle_register_driver(&s3c64xx_cpuidle_driver);
-
-	ret = cpuidle_register_device(&s3c64xx_cpuidle_device);
-	if (ret) {
-		pr_err("Failed to register cpuidle device: %d\n", ret);
-		return ret;
-	}
-
-	return 0;
+	return cpuidle_register(&s3c64xx_cpuidle_driver, NULL);
 }
 device_initcall(s3c64xx_init_cpuidle);

arch/arm/mach-sa1100/Kconfig

@@ -4,7 +4,7 @@ menu "SA11x0 Implementations"
 
 config SA1100_ASSABET
 	bool "Assabet"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	help
 	  Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
 	  Microprocessor Development Board (also known as the Assabet).
@@ -20,7 +20,7 @@ config ASSABET_NEPONSET
 
 config SA1100_CERF
 	bool "CerfBoard"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	help
 	  The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued).
 	  More information is available at:
@@ -47,7 +47,7 @@ endchoice
 
 config SA1100_COLLIE
 	bool "Sharp Zaurus SL5500"
-	# FIXME: select CPU_FREQ_SA11x0
+	# FIXME: select ARM_SA11x0_CPUFREQ
 	select SHARP_LOCOMO
 	select SHARP_PARAM
 	select SHARP_SCOOP
@@ -56,7 +56,7 @@ config SA1100_COLLIE
 
 config SA1100_H3100
 	bool "Compaq iPAQ H3100"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	select HTC_EGPIO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
@@ -67,7 +67,7 @@ config SA1100_H3100
 
 config SA1100_H3600
 	bool "Compaq iPAQ H3600/H3700"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	select HTC_EGPIO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
@@ -78,7 +78,7 @@ config SA1100_H3600
 
 config SA1100_BADGE4
 	bool "HP Labs BadgePAD 4"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	select SA1111
 	help
 	  Say Y here if you want to build a kernel for the HP Laboratories
@@ -86,7 +86,7 @@ config SA1100_BADGE4
 
 config SA1100_JORNADA720
 	bool "HP Jornada 720"
-	# FIXME: select CPU_FREQ_SA11x0
+	# FIXME: select ARM_SA11x0_CPUFREQ
 	select SA1111
 	help
 	  Say Y here if you want to build a kernel for the HP Jornada 720
@@ -105,14 +105,14 @@ config SA1100_JORNADA720_SSP
 
 config SA1100_HACKKIT
 	bool "HackKit Core CPU Board"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	help
 	  Say Y here to support the HackKit Core CPU Board
 	  <http://hackkit.eletztrick.de>;
 
 config SA1100_LART
 	bool "LART"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	help
 	  Say Y here if you are using the Linux Advanced Radio Terminal
 	  (also known as the LART).  See <http://www.lartmaker.nl/> for
@@ -120,7 +120,7 @@ config SA1100_LART
 
 config SA1100_NANOENGINE
 	bool "nanoEngine"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	select PCI
 	select PCI_NANOENGINE
 	help
@@ -130,7 +130,7 @@ config SA1100_NANOENGINE
 
 config SA1100_PLEB
 	bool "PLEB"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	help
 	  Say Y here if you are using version 1 of the Portable Linux
 	  Embedded Board (also known as PLEB).
@@ -139,7 +139,7 @@ config SA1100_PLEB
 
 config SA1100_SHANNON
 	bool "Shannon"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	help
 	  The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
 	  limited edition webphone produced by Philips. The Shannon is a SA1100
@@ -148,7 +148,7 @@ config SA1100_SHANNON
 
 config SA1100_SIMPAD
 	bool "Simpad"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	help
 	  The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
 	  are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB

arch/arm/mach-sa1100/Makefile

@@ -8,9 +8,6 @@ obj-m :=
 obj-n :=
 obj-  :=
 
-obj-$(CONFIG_CPU_FREQ_SA1100)		+= cpu-sa1100.o
-obj-$(CONFIG_CPU_FREQ_SA1110)		+= cpu-sa1110.o
-
 # Specific board support
 obj-$(CONFIG_SA1100_ASSABET)		+= assabet.o
 obj-$(CONFIG_ASSABET_NEPONSET)		+= neponset.o

arch/arm/mach-sa1100/include/mach/generic.h

@@ -0,0 +1 @@
+#include "../../generic.h"

arch/arm/mach-shmobile/cpuidle.c

@@ -16,39 +16,22 @@
 #include <asm/cpuidle.h>
 #include <asm/io.h>
 
-int shmobile_enter_wfi(struct cpuidle_device *dev, struct cpuidle_driver *drv,
-		       int index)
-{
-	cpu_do_idle();
-	return 0;
-}
-
-static struct cpuidle_device shmobile_cpuidle_dev;
 static struct cpuidle_driver shmobile_cpuidle_default_driver = {
 	.name			= "shmobile_cpuidle",
 	.owner			= THIS_MODULE,
-	.en_core_tk_irqen	= 1,
 	.states[0]		= ARM_CPUIDLE_WFI_STATE,
-	.states[0].enter	= shmobile_enter_wfi,
 	.safe_state_index	= 0, /* C1 */
 	.state_count		= 1,
 };
 
 static struct cpuidle_driver *cpuidle_drv = &shmobile_cpuidle_default_driver;
 
-void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv)
+void __init shmobile_cpuidle_set_driver(struct cpuidle_driver *drv)
 {
 	cpuidle_drv = drv;
 }
 
-int shmobile_cpuidle_init(void)
+int __init shmobile_cpuidle_init(void)
 {
-	struct cpuidle_device *dev = &shmobile_cpuidle_dev;
-
-	cpuidle_register_driver(cpuidle_drv);
-
-	dev->state_count = cpuidle_drv->state_count;
-	cpuidle_register_device(dev);
-
-	return 0;
+	return cpuidle_register(cpuidle_drv, NULL);
 }

arch/arm/mach-shmobile/include/mach/common.h

@@ -13,9 +13,6 @@ extern int shmobile_clk_init(void);
 extern void shmobile_handle_irq_intc(struct pt_regs *);
 extern struct platform_suspend_ops shmobile_suspend_ops;
 struct cpuidle_driver;
-struct cpuidle_device;
-extern int shmobile_enter_wfi(struct cpuidle_device *dev,
-			      struct cpuidle_driver *drv, int index);
 extern void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv);
 
 extern void sh7372_init_irq(void);

arch/arm/mach-shmobile/pm-sh7372.c

@@ -410,11 +410,9 @@ static int sh7372_enter_a4s(struct cpuidle_device *dev,
 static struct cpuidle_driver sh7372_cpuidle_driver = {
 	.name			= "sh7372_cpuidle",
 	.owner			= THIS_MODULE,
-	.en_core_tk_irqen	= 1,
 	.state_count		= 5,
 	.safe_state_index	= 0, /* C1 */
 	.states[0] = ARM_CPUIDLE_WFI_STATE,
-	.states[0].enter = shmobile_enter_wfi,
 	.states[1] = {
 		.name = "C2",
 		.desc = "Core Standby Mode",
@@ -450,12 +448,12 @@ static struct cpuidle_driver sh7372_cpuidle_driver = {
 	},
 };
 
-static void sh7372_cpuidle_init(void)
+static void __init sh7372_cpuidle_init(void)
 {
 	shmobile_cpuidle_set_driver(&sh7372_cpuidle_driver);
 }
 #else
-static void sh7372_cpuidle_init(void) {}
+static void __init sh7372_cpuidle_init(void) {}
 #endif
 
 #ifdef CONFIG_SUSPEND

arch/arm/mach-tegra/Makefile

@@ -24,7 +24,6 @@ obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= cpuidle-tegra30.o
 endif
 obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
-obj-$(CONFIG_CPU_FREQ)                  += cpu-tegra.o
 obj-$(CONFIG_TEGRA_PCI)			+= pcie.o
 
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= board-dt-tegra20.o

arch/arm/mach-tegra/cpuidle-tegra114.c

@@ -23,39 +23,13 @@
 static struct cpuidle_driver tegra_idle_driver = {
 	.name = "tegra_idle",
 	.owner = THIS_MODULE,
-	.en_core_tk_irqen = 1,
 	.state_count = 1,
 	.states = {
 		[0] = ARM_CPUIDLE_WFI_STATE_PWR(600),
 	},
 };
 
-static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device);
-
 int __init tegra114_cpuidle_init(void)
 {
-	int ret;
-	unsigned int cpu;
-	struct cpuidle_device *dev;
-	struct cpuidle_driver *drv = &tegra_idle_driver;
-
-	ret = cpuidle_register_driver(&tegra_idle_driver);
-	if (ret) {
-		pr_err("CPUidle driver registration failed\n");
-		return ret;
-	}
-
-	for_each_possible_cpu(cpu) {
-		dev = &per_cpu(tegra_idle_device, cpu);
-		dev->cpu = cpu;
-
-		dev->state_count = drv->state_count;
-		ret = cpuidle_register_device(dev);
-		if (ret) {
-			pr_err("CPU%u: CPUidle device registration failed\n",
-				cpu);
-			return ret;
-		}
-	}
-	return 0;
+	return cpuidle_register(&tegra_idle_driver, NULL);
 }

arch/arm/mach-tegra/cpuidle-tegra20.c

@@ -43,32 +43,33 @@ static atomic_t abort_barrier;
 static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev,
 				    struct cpuidle_driver *drv,
 				    int index);
+#define TEGRA20_MAX_STATES 2
+#else
+#define TEGRA20_MAX_STATES 1
 #endif
 
-static struct cpuidle_state tegra_idle_states[] = {
-	[0] = ARM_CPUIDLE_WFI_STATE_PWR(600),
-#ifdef CONFIG_PM_SLEEP
-	[1] = {
-		.enter			= tegra20_idle_lp2_coupled,
-		.exit_latency		= 5000,
-		.target_residency	= 10000,
-		.power_usage		= 0,
-		.flags			= CPUIDLE_FLAG_TIME_VALID |
-					  CPUIDLE_FLAG_COUPLED,
-		.name			= "powered-down",
-		.desc			= "CPU power gated",
-	},
-#endif
-};
-
 static struct cpuidle_driver tegra_idle_driver = {
 	.name = "tegra_idle",
 	.owner = THIS_MODULE,
-	.en_core_tk_irqen = 1,
+	.states = {
+		ARM_CPUIDLE_WFI_STATE_PWR(600),
+#ifdef CONFIG_PM_SLEEP
+		{
+			.enter            = tegra20_idle_lp2_coupled,
+			.exit_latency     = 5000,
+			.target_residency = 10000,
+			.power_usage      = 0,
+			.flags            = CPUIDLE_FLAG_TIME_VALID |
+			CPUIDLE_FLAG_COUPLED,
+			.name             = "powered-down",
+			.desc             = "CPU power gated",
+		},
+#endif
+	},
+	.state_count = TEGRA20_MAX_STATES,
+	.safe_state_index = 0,
 };
 
-static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device);
-
 #ifdef CONFIG_PM_SLEEP
 #ifdef CONFIG_SMP
 static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE);
@@ -217,39 +218,8 @@ static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev,
 
 int __init tegra20_cpuidle_init(void)
 {
-	int ret;
-	unsigned int cpu;
-	struct cpuidle_device *dev;
-	struct cpuidle_driver *drv = &tegra_idle_driver;
-
 #ifdef CONFIG_PM_SLEEP
 	tegra_tear_down_cpu = tegra20_tear_down_cpu;
 #endif
-
-	drv->state_count = ARRAY_SIZE(tegra_idle_states);
-	memcpy(drv->states, tegra_idle_states,
-			drv->state_count * sizeof(drv->states[0]));
-
-	ret = cpuidle_register_driver(&tegra_idle_driver);
-	if (ret) {
-		pr_err("CPUidle driver registration failed\n");
-		return ret;
-	}
-
-	for_each_possible_cpu(cpu) {
-		dev = &per_cpu(tegra_idle_device, cpu);
-		dev->cpu = cpu;
-#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
-		dev->coupled_cpus = *cpu_possible_mask;
-#endif
-
-		dev->state_count = drv->state_count;
-		ret = cpuidle_register_device(dev);
-		if (ret) {
-			pr_err("CPU%u: CPUidle device registration failed\n",
-				cpu);
-			return ret;
-		}
-	}
-	return 0;
+	return cpuidle_register(&tegra_idle_driver, cpu_possible_mask);
 }

arch/arm/mach-tegra/cpuidle-tegra30.c

@@ -43,7 +43,6 @@ static int tegra30_idle_lp2(struct cpuidle_device *dev,
 static struct cpuidle_driver tegra_idle_driver = {
 	.name = "tegra_idle",
 	.owner = THIS_MODULE,
-	.en_core_tk_irqen = 1,
 #ifdef CONFIG_PM_SLEEP
 	.state_count = 2,
 #else
@@ -65,8 +64,6 @@ static struct cpuidle_driver tegra_idle_driver = {
 	},
 };
 
-static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device);
-
 #ifdef CONFIG_PM_SLEEP
 static bool tegra30_cpu_cluster_power_down(struct cpuidle_device *dev,
 					   struct cpuidle_driver *drv,
@@ -157,32 +154,8 @@ static int tegra30_idle_lp2(struct cpuidle_device *dev,
 
 int __init tegra30_cpuidle_init(void)
 {
-	int ret;
-	unsigned int cpu;
-	struct cpuidle_device *dev;
-	struct cpuidle_driver *drv = &tegra_idle_driver;
-
 #ifdef CONFIG_PM_SLEEP
 	tegra_tear_down_cpu = tegra30_tear_down_cpu;
 #endif
-
-	ret = cpuidle_register_driver(&tegra_idle_driver);
-	if (ret) {
-		pr_err("CPUidle driver registration failed\n");
-		return ret;
-	}
-
-	for_each_possible_cpu(cpu) {
-		dev = &per_cpu(tegra_idle_device, cpu);
-		dev->cpu = cpu;
-
-		dev->state_count = drv->state_count;
-		ret = cpuidle_register_device(dev);
-		if (ret) {
-			pr_err("CPU%u: CPUidle device registration failed\n",
-				cpu);
-			return ret;
-		}
-	}
-	return 0;
+	return cpuidle_register(&tegra_idle_driver, NULL);
 }

arch/arm/mach-ux500/cpuidle.c

@@ -11,7 +11,6 @@
 
 #include <linux/module.h>
 #include <linux/cpuidle.h>
-#include <linux/clockchips.h>
 #include <linux/spinlock.h>
 #include <linux/atomic.h>
 #include <linux/smp.h>
@@ -22,7 +21,6 @@
 
 static atomic_t master = ATOMIC_INIT(0);
 static DEFINE_SPINLOCK(master_lock);
-static DEFINE_PER_CPU(struct cpuidle_device, ux500_cpuidle_device);
 
 static inline int ux500_enter_idle(struct cpuidle_device *dev,
 				   struct cpuidle_driver *drv, int index)
@@ -30,8 +28,6 @@ static inline int ux500_enter_idle(struct cpuidle_device *dev,
 	int this_cpu = smp_processor_id();
 	bool recouple = false;
 
-	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &this_cpu);
-
 	if (atomic_inc_return(&master) == num_online_cpus()) {
 
 		/* With this lock, we prevent the other cpu to exit and enter
@@ -91,22 +87,20 @@ out:
 		spin_unlock(&master_lock);
 	}
 
-	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &this_cpu);
-
 	return index;
 }
 
 static struct cpuidle_driver ux500_idle_driver = {
 	.name = "ux500_idle",
 	.owner = THIS_MODULE,
-	.en_core_tk_irqen = 1,
 	.states = {
 		ARM_CPUIDLE_WFI_STATE,
 		{
 			.enter		  = ux500_enter_idle,
 			.exit_latency	  = 70,
 			.target_residency = 260,
-			.flags		  = CPUIDLE_FLAG_TIME_VALID,
+			.flags		  = CPUIDLE_FLAG_TIME_VALID |
+			                    CPUIDLE_FLAG_TIMER_STOP,
 			.name		  = "ApIdle",
 			.desc		  = "ARM Retention",
 		},
@@ -115,59 +109,13 @@ static struct cpuidle_driver ux500_idle_driver = {
 	.state_count = 2,
 };
 
-/*
- * For each cpu, setup the broadcast timer because we will
- * need to migrate the timers for the states >= ApIdle.
- */
-static void ux500_setup_broadcast_timer(void *arg)
-{
-	int cpu = smp_processor_id();
-	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu);
-}
-
 int __init ux500_idle_init(void)
 {
-	int ret, cpu;
-	struct cpuidle_device *device;
-
         /* Configure wake up reasons */
 	prcmu_enable_wakeups(PRCMU_WAKEUP(ARM) | PRCMU_WAKEUP(RTC) |
 			     PRCMU_WAKEUP(ABB));
 
-	/*
-	 * Configure the timer broadcast for each cpu, that must
-	 * be done from the cpu context, so we use a smp cross
-	 * call with 'on_each_cpu'.
-	 */
-	on_each_cpu(ux500_setup_broadcast_timer, NULL, 1);
-
-	ret = cpuidle_register_driver(&ux500_idle_driver);
-	if (ret) {
-		printk(KERN_ERR "failed to register ux500 idle driver\n");
-		return ret;
-	}
-
-	for_each_online_cpu(cpu) {
-		device = &per_cpu(ux500_cpuidle_device, cpu);
-		device->cpu = cpu;
-		ret = cpuidle_register_device(device);
-		if (ret) {
-			printk(KERN_ERR "Failed to register cpuidle "
-			       "device for cpu%d\n", cpu);
-			goto out_unregister;
-		}
-	}
-out:
-	return ret;
-
-out_unregister:
-	for_each_online_cpu(cpu) {
-		device = &per_cpu(ux500_cpuidle_device, cpu);
-		cpuidle_unregister_device(device);
-	}
-
-	cpuidle_unregister_driver(&ux500_idle_driver);
-	goto out;
+	return cpuidle_register(&ux500_idle_driver, NULL);
 }
 
 device_initcall(ux500_idle_init);

arch/avr32/Kconfig

@@ -250,20 +250,7 @@ config ARCH_SUSPEND_POSSIBLE
 	def_bool y
 
 menu "CPU Frequency scaling"
-
 source "drivers/cpufreq/Kconfig"
-
-config CPU_FREQ_AT32AP
-	bool "CPU frequency driver for AT32AP"
-	depends on CPU_FREQ && PLATFORM_AT32AP
-	default n
-	help
-	  This enables the CPU frequency driver for AT32AP processors.
-
-	  For details, take a look in <file:Documentation/cpu-freq>.
-
-	  If in doubt, say N.
-
 endmenu
 
 endmenu

arch/avr32/configs/atngw100_defconfig

@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y

arch/avr32/configs/atngw100_evklcd100_defconfig

@@ -28,7 +28,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y

arch/avr32/configs/atngw100_evklcd101_defconfig

@@ -27,7 +27,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y

arch/avr32/configs/atngw100_mrmt_defconfig

@@ -23,7 +23,7 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y

arch/avr32/configs/atngw100mkii_defconfig

@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y

arch/avr32/configs/atngw100mkii_evklcd100_defconfig

@@ -29,7 +29,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y

arch/avr32/configs/atngw100mkii_evklcd101_defconfig

@@ -28,7 +28,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y

arch/avr32/configs/atstk1002_defconfig

@@ -25,7 +25,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y

arch/avr32/configs/atstk1003_defconfig

@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y

arch/avr32/configs/atstk1004_defconfig

@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y

arch/avr32/configs/atstk1006_defconfig

@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_NET=y
 CONFIG_PACKET=y

arch/avr32/configs/favr-32_defconfig

@@ -27,7 +27,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y

arch/avr32/configs/hammerhead_defconfig

@@ -31,7 +31,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y

arch/avr32/configs/mimc200_defconfig

@@ -24,7 +24,7 @@ CONFIG_CPU_FREQ=y
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_AT32AP=y
+CONFIG_AVR32_AT32AP_CPUFREQ=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y

arch/avr32/mach-at32ap/Makefile

@@ -1,7 +1,6 @@
 obj-y				+= pdc.o clock.o intc.o extint.o pio.o hsmc.o
 obj-y				+= hmatrix.o
 obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o pm-at32ap700x.o
-obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
 obj-$(CONFIG_PM)		+= pm.o
 
 ifeq ($(CONFIG_PM_DEBUG),y)

arch/blackfin/mach-common/Makefile

@@ -10,7 +10,6 @@ obj-$(CONFIG_PM)          += pm.o
 ifneq ($(CONFIG_BF60x),y)
 obj-$(CONFIG_PM)	  += dpmc_modes.o
 endif
-obj-$(CONFIG_CPU_FREQ)    += cpufreq.o
 obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o
 obj-$(CONFIG_SMP)         += smp.o
 obj-$(CONFIG_BFIN_KERNEL_CLOCK) += clocks-init.o

arch/cris/arch-v32/mach-a3/Makefile

@@ -3,7 +3,6 @@
 #
 
 obj-y   := dma.o pinmux.o io.o arbiter.o
-obj-$(CONFIG_CPU_FREQ)   += cpufreq.o
 
 clean:
 

arch/cris/arch-v32/mach-fs/Makefile

@@ -3,7 +3,6 @@
 #
 
 obj-y   := dma.o pinmux.o io.o arbiter.o
-obj-$(CONFIG_CPU_FREQ)   += cpufreq.o
 
 clean:
 

arch/ia64/Kconfig

@@ -591,9 +591,9 @@ source "kernel/power/Kconfig"
 source "drivers/acpi/Kconfig"
 
 if PM
-
-source "arch/ia64/kernel/cpufreq/Kconfig"
-
+menu "CPU Frequency scaling"
+source "drivers/cpufreq/Kconfig"
+endmenu
 endif
 
 endmenu

arch/ia64/kernel/Makefile

@@ -23,7 +23,6 @@ obj-$(CONFIG_SMP)		+= smp.o smpboot.o
 obj-$(CONFIG_NUMA)		+= numa.o
 obj-$(CONFIG_PERFMON)		+= perfmon_default_smpl.o
 obj-$(CONFIG_IA64_CYCLONE)	+= cyclone.o
-obj-$(CONFIG_CPU_FREQ)		+= cpufreq/
 obj-$(CONFIG_IA64_MCA_RECOVERY)	+= mca_recovery.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o jprobes.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o

arch/ia64/kernel/cpufreq/Kconfig

@@ -1,29 +0,0 @@
-
-#
-# CPU Frequency scaling
-#
-
-menu "CPU Frequency scaling"
-
-source "drivers/cpufreq/Kconfig"
-
-if CPU_FREQ
-
-comment "CPUFreq processor drivers"
-
-config IA64_ACPI_CPUFREQ
-	tristate "ACPI Processor P-States driver"
-	select CPU_FREQ_TABLE
-	depends on ACPI_PROCESSOR
-	help
-	This driver adds a CPUFreq driver which utilizes the ACPI
-	Processor Performance States.
-
-	For details, take a look at <file:Documentation/cpu-freq/>.
-
-	If in doubt, say N.
-
-endif   # CPU_FREQ
-
-endmenu
-

arch/ia64/kernel/cpufreq/Makefile

@@ -1,2 +0,0 @@
-obj-$(CONFIG_IA64_ACPI_CPUFREQ)		+= acpi-cpufreq.o
-

arch/mips/Kconfig

@@ -2541,7 +2541,14 @@ source "kernel/power/Kconfig"
 
 endmenu
 
-source "arch/mips/kernel/cpufreq/Kconfig"
+config MIPS_EXTERNAL_TIMER
+	bool
+
+if CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
+menu "CPU Power Management"
+source "drivers/cpufreq/Kconfig"
+endmenu
+endif
 
 source "net/Kconfig"
 

arch/mips/kernel/Makefile

@@ -92,8 +92,6 @@ CFLAGS_cpu-bugs64.o	= $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/n
 
 obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT)	+= 8250-platform.o
 
-obj-$(CONFIG_MIPS_CPUFREQ)	+= cpufreq/
-
 obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o
 obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event_mipsxx.o
 

arch/mips/kernel/cpufreq/Kconfig

@@ -1,41 +0,0 @@
-#
-# CPU Frequency scaling
-#
-
-config MIPS_EXTERNAL_TIMER
-	bool
-
-config MIPS_CPUFREQ
-	bool
-	default y
-	depends on CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
-
-if MIPS_CPUFREQ
-
-menu "CPU Frequency scaling"
-
-source "drivers/cpufreq/Kconfig"
-
-if CPU_FREQ
-
-comment "CPUFreq processor drivers"
-
-config LOONGSON2_CPUFREQ
-	tristate "Loongson2 CPUFreq Driver"
-	select CPU_FREQ_TABLE
-	depends on MIPS_CPUFREQ
-	help
-	  This option adds a CPUFreq driver for loongson processors which
-	  support software configurable cpu frequency.
-
-	  Loongson2F and it's successors support this feature.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  If in doubt, say N.
-
-endif	# CPU_FREQ
-
-endmenu
-
-endif	# MIPS_CPUFREQ

arch/mips/kernel/cpufreq/Makefile

@@ -1,5 +0,0 @@
-#
-# Makefile for the Linux/MIPS cpufreq.
-#
-
-obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o

arch/powerpc/platforms/cell/Kconfig

@@ -113,34 +113,10 @@ config CBE_THERM
 	default m
 	depends on CBE_RAS && SPU_BASE
 
-config CBE_CPUFREQ
-	tristate "CBE frequency scaling"
-	depends on CBE_RAS && CPU_FREQ
-	default m
-	help
-	  This adds the cpufreq driver for Cell BE processors.
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-	  If you don't have such processor, say N
-
-config CBE_CPUFREQ_PMI_ENABLE
-	bool "CBE frequency scaling using PMI interface"
-	depends on CBE_CPUFREQ
-	default n
-	help
-	  Select this, if you want to use the PMI interface
-	  to switch frequencies. Using PMI, the
-	  processor will not only be able to run at lower speed,
-	  but also at lower core voltage.
-
-config CBE_CPUFREQ_PMI
-	tristate
-	depends on CBE_CPUFREQ_PMI_ENABLE
-	default CBE_CPUFREQ
-
 config PPC_PMI
 	tristate
 	default y
-	depends on CBE_CPUFREQ_PMI || PPC_IBM_CELL_POWERBUTTON
+	depends on CPU_FREQ_CBE_PMI || PPC_IBM_CELL_POWERBUTTON
 	help
 	  PMI (Platform Management Interrupt) is a way to
 	  communicate with the BMC (Baseboard Management Controller).

arch/powerpc/platforms/cell/Makefile

@@ -5,9 +5,6 @@ obj-$(CONFIG_PPC_CELL_NATIVE)		+= iommu.o setup.o spider-pic.o \
 obj-$(CONFIG_CBE_RAS)			+= ras.o
 
 obj-$(CONFIG_CBE_THERM)			+= cbe_thermal.o
-obj-$(CONFIG_CBE_CPUFREQ_PMI)		+= cbe_cpufreq_pmi.o
-obj-$(CONFIG_CBE_CPUFREQ)		+= cbe-cpufreq.o
-cbe-cpufreq-y				+= cbe_cpufreq_pervasive.o cbe_cpufreq.o
 obj-$(CONFIG_CBE_CPUFREQ_SPU_GOVERNOR)	+= cpufreq_spudemand.o
 
 obj-$(CONFIG_PPC_IBM_CELL_POWERBUTTON)	+= cbe_powerbutton.o

arch/powerpc/platforms/pasemi/cpufreq.c

@@ -273,10 +273,9 @@ static int pas_cpufreq_target(struct cpufreq_policy *policy,
 
 	freqs.old = policy->cur;
 	freqs.new = pas_freqs[pas_astate_new].frequency;
-	freqs.cpu = policy->cpu;
 
 	mutex_lock(&pas_switch_mutex);
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 
 	pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n",
 		 policy->cpu,
@@ -288,7 +287,7 @@ static int pas_cpufreq_target(struct cpufreq_policy *policy,
 	for_each_online_cpu(i)
 		set_astate(i, pas_astate_new);
 
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 	mutex_unlock(&pas_switch_mutex);
 
 	ppc_proc_freq = freqs.new * 1000ul;

arch/powerpc/platforms/powermac/cpufreq_32.c

@@ -335,7 +335,8 @@ static int pmu_set_cpu_speed(int low_speed)
 	return 0;
 }
 
-static int do_set_cpu_speed(int speed_mode, int notify)
+static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode,
+		int notify)
 {
 	struct cpufreq_freqs freqs;
 	unsigned long l3cr;
@@ -343,13 +344,12 @@ static int do_set_cpu_speed(int speed_mode, int notify)
 
 	freqs.old = cur_freq;
 	freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
-	freqs.cpu = smp_processor_id();
 
 	if (freqs.old == freqs.new)
 		return 0;
 
 	if (notify)
-		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+		cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 	if (speed_mode == CPUFREQ_LOW &&
 	    cpu_has_feature(CPU_FTR_L3CR)) {
 		l3cr = _get_L3CR();
@@ -366,7 +366,7 @@ static int do_set_cpu_speed(int speed_mode, int notify)
 			_set_L3CR(prev_l3cr);
 	}
 	if (notify)
-		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+		cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 	cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
 
 	return 0;
@@ -393,7 +393,7 @@ static int pmac_cpufreq_target(	struct cpufreq_policy *policy,
 			target_freq, relation, &newstate))
 		return -EINVAL;
 
-	rc = do_set_cpu_speed(newstate, 1);
+	rc = do_set_cpu_speed(policy, newstate, 1);
 
 	ppc_proc_freq = cur_freq * 1000ul;
 	return rc;
@@ -442,7 +442,7 @@ static int pmac_cpufreq_suspend(struct cpufreq_policy *policy)
 	no_schedule = 1;
 	sleep_freq = cur_freq;
 	if (cur_freq == low_freq && !is_pmu_based)
-		do_set_cpu_speed(CPUFREQ_HIGH, 0);
+		do_set_cpu_speed(policy, CPUFREQ_HIGH, 0);
 	return 0;
 }
 
@@ -458,7 +458,7 @@ static int pmac_cpufreq_resume(struct cpufreq_policy *policy)
 	 * is that we force a switch to whatever it was, which is
 	 * probably high speed due to our suspend() routine
 	 */
-	do_set_cpu_speed(sleep_freq == low_freq ?
+	do_set_cpu_speed(policy, sleep_freq == low_freq ?
 			 CPUFREQ_LOW : CPUFREQ_HIGH, 0);
 
 	ppc_proc_freq = cur_freq * 1000ul;

arch/powerpc/platforms/powermac/cpufreq_64.c

@@ -339,11 +339,10 @@ static int g5_cpufreq_target(struct cpufreq_policy *policy,
 
 	freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency;
 	freqs.new = g5_cpu_freqs[newstate].frequency;
-	freqs.cpu = 0;
 
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 	rc = g5_switch_freq(newstate);
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 
 	mutex_unlock(&g5_switch_mutex);
 

arch/powerpc/platforms/pseries/processor_idle.c

@@ -23,8 +23,8 @@
 #include "pseries.h"
 
 struct cpuidle_driver pseries_idle_driver = {
-	.name =		"pseries_idle",
-	.owner =	THIS_MODULE,
+	.name             = "pseries_idle",
+	.owner            = THIS_MODULE,
 };
 
 #define MAX_IDLE_STATE_COUNT	2
@@ -33,10 +33,8 @@ static int max_idle_state = MAX_IDLE_STATE_COUNT - 1;
 static struct cpuidle_device __percpu *pseries_cpuidle_devices;
 static struct cpuidle_state *cpuidle_state_table;
 
-static inline void idle_loop_prolog(unsigned long *in_purr, ktime_t *kt_before)
+static inline void idle_loop_prolog(unsigned long *in_purr)
 {
-
-	*kt_before = ktime_get();
 	*in_purr = mfspr(SPRN_PURR);
 	/*
 	 * Indicate to the HV that we are idle. Now would be
@@ -45,12 +43,10 @@ static inline void idle_loop_prolog(unsigned long *in_purr, ktime_t *kt_before)
 	get_lppaca()->idle = 1;
 }
 
-static inline  s64 idle_loop_epilog(unsigned long in_purr, ktime_t kt_before)
+static inline void idle_loop_epilog(unsigned long in_purr)
 {
 	get_lppaca()->wait_state_cycles += mfspr(SPRN_PURR) - in_purr;
 	get_lppaca()->idle = 0;
-
-	return ktime_to_us(ktime_sub(ktime_get(), kt_before));
 }
 
 static int snooze_loop(struct cpuidle_device *dev,
@@ -58,10 +54,9 @@ static int snooze_loop(struct cpuidle_device *dev,
 			int index)
 {
 	unsigned long in_purr;
-	ktime_t kt_before;
 	int cpu = dev->cpu;
 
-	idle_loop_prolog(&in_purr, &kt_before);
+	idle_loop_prolog(&in_purr);
 	local_irq_enable();
 	set_thread_flag(TIF_POLLING_NRFLAG);
 
@@ -75,8 +70,8 @@ static int snooze_loop(struct cpuidle_device *dev,
 	clear_thread_flag(TIF_POLLING_NRFLAG);
 	smp_mb();
 
-	dev->last_residency =
-		(int)idle_loop_epilog(in_purr, kt_before);
+	idle_loop_epilog(in_purr);
+
 	return index;
 }
 
@@ -102,9 +97,8 @@ static int dedicated_cede_loop(struct cpuidle_device *dev,
 				int index)
 {
 	unsigned long in_purr;
-	ktime_t kt_before;
 
-	idle_loop_prolog(&in_purr, &kt_before);
+	idle_loop_prolog(&in_purr);
 	get_lppaca()->donate_dedicated_cpu = 1;
 
 	ppc64_runlatch_off();
@@ -112,8 +106,9 @@ static int dedicated_cede_loop(struct cpuidle_device *dev,
 	check_and_cede_processor();
 
 	get_lppaca()->donate_dedicated_cpu = 0;
-	dev->last_residency =
-		(int)idle_loop_epilog(in_purr, kt_before);
+
+	idle_loop_epilog(in_purr);
+
 	return index;
 }
 
@@ -122,9 +117,8 @@ static int shared_cede_loop(struct cpuidle_device *dev,
 			int index)
 {
 	unsigned long in_purr;
-	ktime_t kt_before;
 
-	idle_loop_prolog(&in_purr, &kt_before);
+	idle_loop_prolog(&in_purr);
 
 	/*
 	 * Yield the processor to the hypervisor.  We return if
@@ -135,8 +129,8 @@ static int shared_cede_loop(struct cpuidle_device *dev,
 	 */
 	check_and_cede_processor();
 
-	dev->last_residency =
-		(int)idle_loop_epilog(in_purr, kt_before);
+	idle_loop_epilog(in_purr);
+
 	return index;
 }
 

arch/sh/Kconfig

@@ -622,25 +622,7 @@ config SH_CLK_CPG_LEGACY
 endmenu
 
 menu "CPU Frequency scaling"
-
 source "drivers/cpufreq/Kconfig"
-
-config SH_CPU_FREQ
-	tristate "SuperH CPU Frequency driver"
-	depends on CPU_FREQ
-	select CPU_FREQ_TABLE
-	help
-	  This adds the cpufreq driver for SuperH. Any CPU that supports
-	  clock rate rounding through the clock framework can use this
-	  driver. While it will make the kernel slightly larger, this is
-	  harmless for CPUs that don't support rate rounding. The driver
-	  will also generate a notice in the boot log before disabling
-	  itself if the CPU in question is not capable of rate rounding.
-
-	  For details, take a look at <file:Documentation/cpu-freq>.
-
-	  If unsure, say N.
-
 endmenu
 
 source "arch/sh/drivers/Kconfig"

arch/sh/include/asm/suspend.h

@@ -14,9 +14,9 @@ struct swsusp_arch_regs {
 void sh_mobile_call_standby(unsigned long mode);
 
 #ifdef CONFIG_CPU_IDLE
-void sh_mobile_setup_cpuidle(void);
+int sh_mobile_setup_cpuidle(void);
 #else
-static inline void sh_mobile_setup_cpuidle(void) {}
+static inline int sh_mobile_setup_cpuidle(void) { return 0; }
 #endif
 
 /* notifier chains for pre/post sleep hooks */

arch/sh/kernel/Makefile

@@ -31,7 +31,6 @@ obj-$(CONFIG_VSYSCALL)		+= vsyscall/
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_SH_STANDARD_BIOS)	+= sh_bios.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
-obj-$(CONFIG_SH_CPU_FREQ)	+= cpufreq.o
 obj-$(CONFIG_MODULES)		+= sh_ksyms_$(BITS).o module.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o

arch/sh/kernel/cpu/shmobile/cpuidle.c

@@ -51,70 +51,53 @@ static int cpuidle_sleep_enter(struct cpuidle_device *dev,
 	return k;
 }
 
-static struct cpuidle_device cpuidle_dev;
 static struct cpuidle_driver cpuidle_driver = {
-	.name			= "sh_idle",
-	.owner			= THIS_MODULE,
-	.en_core_tk_irqen	= 1,
+	.name   = "sh_idle",
+	.owner  = THIS_MODULE,
+	.states = {
+		{
+			.exit_latency = 1,
+			.target_residency = 1 * 2,
+			.power_usage = 3,
+			.flags = CPUIDLE_FLAG_TIME_VALID,
+			.enter = cpuidle_sleep_enter,
+			.name = "C1",
+			.desc = "SuperH Sleep Mode",
+		},
+		{
+			.exit_latency = 100,
+			.target_residency = 1 * 2,
+			.power_usage = 1,
+			.flags = CPUIDLE_FLAG_TIME_VALID,
+			.enter = cpuidle_sleep_enter,
+			.name = "C2",
+			.desc = "SuperH Sleep Mode [SF]",
+			.disabled = true,
+		},
+		{
+			.exit_latency = 2300,
+			.target_residency = 1 * 2,
+			.power_usage = 1,
+			.flags = CPUIDLE_FLAG_TIME_VALID,
+			.enter = cpuidle_sleep_enter,
+			.name = "C3",
+			.desc = "SuperH Mobile Standby Mode [SF]",
+			.disabled = true,
+		},
+	},
+	.safe_state_index = 0,
+	.state_count = 3,
 };
 
-void sh_mobile_setup_cpuidle(void)
+int __init sh_mobile_setup_cpuidle(void)
 {
-	struct cpuidle_device *dev = &cpuidle_dev;
-	struct cpuidle_driver *drv = &cpuidle_driver;
-	struct cpuidle_state *state;
-	int i;
+	int ret;
 
+	if (sh_mobile_sleep_supported & SUSP_SH_SF)
+		cpuidle_driver.states[1].disabled = false;
 
-	for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
-		drv->states[i].name[0] = '\0';
-		drv->states[i].desc[0] = '\0';
-	}
+	if (sh_mobile_sleep_supported & SUSP_SH_STANDBY)
+		cpuidle_driver.states[2].disabled = false;
 
-	i = CPUIDLE_DRIVER_STATE_START;
-
-	state = &drv->states[i++];
-	snprintf(state->name, CPUIDLE_NAME_LEN, "C1");
-	strncpy(state->desc, "SuperH Sleep Mode", CPUIDLE_DESC_LEN);
-	state->exit_latency = 1;
-	state->target_residency = 1 * 2;
-	state->power_usage = 3;
-	state->flags = 0;
-	state->flags |= CPUIDLE_FLAG_TIME_VALID;
-	state->enter = cpuidle_sleep_enter;
-
-	drv->safe_state_index = i-1;
-
-	if (sh_mobile_sleep_supported & SUSP_SH_SF) {
-		state = &drv->states[i++];
-		snprintf(state->name, CPUIDLE_NAME_LEN, "C2");
-		strncpy(state->desc, "SuperH Sleep Mode [SF]",
-			CPUIDLE_DESC_LEN);
-		state->exit_latency = 100;
-		state->target_residency = 1 * 2;
-		state->power_usage = 1;
-		state->flags = 0;
-		state->flags |= CPUIDLE_FLAG_TIME_VALID;
-		state->enter = cpuidle_sleep_enter;
-	}
-
-	if (sh_mobile_sleep_supported & SUSP_SH_STANDBY) {
-		state = &drv->states[i++];
-		snprintf(state->name, CPUIDLE_NAME_LEN, "C3");
-		strncpy(state->desc, "SuperH Mobile Standby Mode [SF]",
-			CPUIDLE_DESC_LEN);
-		state->exit_latency = 2300;
-		state->target_residency = 1 * 2;
-		state->power_usage = 1;
-		state->flags = 0;
-		state->flags |= CPUIDLE_FLAG_TIME_VALID;
-		state->enter = cpuidle_sleep_enter;
-	}
-
-	drv->state_count = i;
-	dev->state_count = i;
-
-	cpuidle_register_driver(&cpuidle_driver);
-
-	cpuidle_register_device(dev);
+	return cpuidle_register(&cpuidle_driver);
 }

arch/sh/kernel/cpu/shmobile/pm.c

@@ -150,8 +150,7 @@ static const struct platform_suspend_ops sh_pm_ops = {
 static int __init sh_pm_init(void)
 {
 	suspend_set_ops(&sh_pm_ops);
-	sh_mobile_setup_cpuidle();
-	return 0;
+	return sh_mobile_setup_cpuidle();
 }
 
 late_initcall(sh_pm_init);

arch/sparc/Kconfig

@@ -254,29 +254,6 @@ config HOTPLUG_CPU
 
 if SPARC64
 source "drivers/cpufreq/Kconfig"
-
-config US3_FREQ
-	tristate "UltraSPARC-III CPU Frequency driver"
-	depends on CPU_FREQ
-	select CPU_FREQ_TABLE
-	help
-	  This adds the CPUFreq driver for UltraSPARC-III processors.
-
-	  For details, take a look at <file:Documentation/cpu-freq>.
-
-	  If in doubt, say N.
-
-config US2E_FREQ
-	tristate "UltraSPARC-IIe CPU Frequency driver"
-	depends on CPU_FREQ
-	select CPU_FREQ_TABLE
-	help
-	  This adds the CPUFreq driver for UltraSPARC-IIe processors.
-
-	  For details, take a look at <file:Documentation/cpu-freq>.
-
-	  If in doubt, say N.
-
 endif
 
 config US3_MC

arch/sparc/kernel/Makefile

@@ -102,9 +102,6 @@ obj-$(CONFIG_PCI_MSI)        += pci_msi.o
 
 obj-$(CONFIG_COMPAT)         += sys32.o sys_sparc32.o signal32.o
 
-# sparc64 cpufreq
-obj-$(CONFIG_US3_FREQ)  += us3_cpufreq.o
-obj-$(CONFIG_US2E_FREQ) += us2e_cpufreq.o
 obj-$(CONFIG_US3_MC)    += chmc.o
 
 obj-$(CONFIG_KPROBES)   += kprobes.o

arch/unicore32/kernel/Makefile

@@ -9,7 +9,6 @@ obj-y				+= setup.o signal.o sys.o stacktrace.o traps.o
 obj-$(CONFIG_MODULES)		+= ksyms.o module.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
-obj-$(CONFIG_CPU_FREQ)		+= cpu-ucv2.o
 obj-$(CONFIG_UNICORE_FPU_F64)	+= fpu-ucf64.o
 
 # obj-y for architecture PKUnity v3

arch/x86/include/asm/cpufeature.h

@@ -185,6 +185,7 @@
 #define X86_FEATURE_PTS		(7*32+ 6) /* Intel Package Thermal Status */
 #define X86_FEATURE_DTHERM	(7*32+ 7) /* Digital Thermal Sensor */
 #define X86_FEATURE_HW_PSTATE	(7*32+ 8) /* AMD HW-PState */
+#define X86_FEATURE_PROC_FEEDBACK (7*32+ 9) /* AMD ProcFeedbackInterface */
 
 /* Virtualization flags: Linux defined, word 8 */
 #define X86_FEATURE_TPR_SHADOW  (8*32+ 0) /* Intel TPR Shadow */

arch/x86/kernel/apm_32.c

@@ -373,7 +373,6 @@ static int apm_cpu_idle(struct cpuidle_device *dev,
 static struct cpuidle_driver apm_idle_driver = {
 	.name = "apm_idle",
 	.owner = THIS_MODULE,
-	.en_core_tk_irqen = 1,
 	.states = {
 		{ /* entry 0 is for polling */ },
 		{ /* entry 1 is for APM idle */

arch/x86/kernel/cpu/scattered.c

@@ -39,8 +39,9 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c)
 		{ X86_FEATURE_APERFMPERF,	CR_ECX, 0, 0x00000006, 0 },
 		{ X86_FEATURE_EPB,		CR_ECX, 3, 0x00000006, 0 },
 		{ X86_FEATURE_XSAVEOPT,		CR_EAX,	0, 0x0000000d, 1 },
-		{ X86_FEATURE_CPB,		CR_EDX, 9, 0x80000007, 0 },
 		{ X86_FEATURE_HW_PSTATE,	CR_EDX, 7, 0x80000007, 0 },
+		{ X86_FEATURE_CPB,		CR_EDX, 9, 0x80000007, 0 },
+		{ X86_FEATURE_PROC_FEEDBACK,	CR_EDX,11, 0x80000007, 0 },
 		{ X86_FEATURE_NPT,		CR_EDX, 0, 0x8000000a, 0 },
 		{ X86_FEATURE_LBRV,		CR_EDX, 1, 0x8000000a, 0 },
 		{ X86_FEATURE_SVML,		CR_EDX, 2, 0x8000000a, 0 },

drivers/acpi/Kconfig

@@ -298,14 +298,6 @@ config ACPI_DEBUG
 	  Documentation/kernel-parameters.txt to control the type and
 	  amount of debug output.
 
-config ACPI_DEBUG_FUNC_TRACE
-	bool "Additionally enable ACPI function tracing"
-	default n
-	depends on ACPI_DEBUG
-	help
-	  ACPI Debug Statements slow down ACPI processing. Function trace
-	  is about half of the penalty and is rarely useful.
-
 config ACPI_PCI_SLOT
 	bool "PCI slot detection driver"
 	depends on SYSFS
@@ -334,7 +326,7 @@ config X86_PM_TIMER
 
 config ACPI_CONTAINER
 	bool "Container and Module Devices"
-	default (ACPI_HOTPLUG_MEMORY || ACPI_HOTPLUG_CPU || ACPI_HOTPLUG_IO)
+	default (ACPI_HOTPLUG_MEMORY || ACPI_HOTPLUG_CPU)
 	help
 	  This driver supports ACPI Container and Module devices (IDs
 	  ACPI0004, PNP0A05, and PNP0A06).
@@ -345,9 +337,8 @@ config ACPI_CONTAINER
 	  the module will be called container.
 
 config ACPI_HOTPLUG_MEMORY
-	tristate "Memory Hotplug"
+	bool "Memory Hotplug"
 	depends on MEMORY_HOTPLUG
-	default n
 	help
 	  This driver supports ACPI memory hotplug.  The driver
 	  fields notifications on ACPI memory devices (PNP0C80),

drivers/acpi/Makefile

@@ -39,6 +39,7 @@ acpi-y				+= ec.o
 acpi-$(CONFIG_ACPI_DOCK)	+= dock.o
 acpi-y				+= pci_root.o pci_link.o pci_irq.o
 acpi-y				+= csrt.o
+acpi-$(CONFIG_X86_INTEL_LPSS)	+= acpi_lpss.o
 acpi-y				+= acpi_platform.o
 acpi-y				+= power.o
 acpi-y				+= event.o

drivers/acpi/acpi_lpss.c

@@ -0,0 +1,292 @@
+/*
+ * ACPI support for Intel Lynxpoint LPSS.
+ *
+ * Copyright (C) 2013, Intel Corporation
+ * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *          Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/clk-lpss.h>
+#include <linux/pm_runtime.h>
+
+#include "internal.h"
+
+ACPI_MODULE_NAME("acpi_lpss");
+
+#define LPSS_CLK_SIZE	0x04
+#define LPSS_LTR_SIZE	0x18
+
+/* Offsets relative to LPSS_PRIVATE_OFFSET */
+#define LPSS_GENERAL			0x08
+#define LPSS_GENERAL_LTR_MODE_SW	BIT(2)
+#define LPSS_SW_LTR			0x10
+#define LPSS_AUTO_LTR			0x14
+
+struct lpss_device_desc {
+	bool clk_required;
+	const char *clk_parent;
+	bool ltr_required;
+	unsigned int prv_offset;
+};
+
+struct lpss_private_data {
+	void __iomem *mmio_base;
+	resource_size_t mmio_size;
+	struct clk *clk;
+	const struct lpss_device_desc *dev_desc;
+};
+
+static struct lpss_device_desc lpt_dev_desc = {
+	.clk_required = true,
+	.clk_parent = "lpss_clk",
+	.prv_offset = 0x800,
+	.ltr_required = true,
+};
+
+static struct lpss_device_desc lpt_sdio_dev_desc = {
+	.prv_offset = 0x1000,
+	.ltr_required = true,
+};
+
+static const struct acpi_device_id acpi_lpss_device_ids[] = {
+	/* Lynxpoint LPSS devices */
+	{ "INT33C0", (unsigned long)&lpt_dev_desc },
+	{ "INT33C1", (unsigned long)&lpt_dev_desc },
+	{ "INT33C2", (unsigned long)&lpt_dev_desc },
+	{ "INT33C3", (unsigned long)&lpt_dev_desc },
+	{ "INT33C4", (unsigned long)&lpt_dev_desc },
+	{ "INT33C5", (unsigned long)&lpt_dev_desc },
+	{ "INT33C6", (unsigned long)&lpt_sdio_dev_desc },
+	{ "INT33C7", },
+
+	{ }
+};
+
+static int is_memory(struct acpi_resource *res, void *not_used)
+{
+	struct resource r;
+	return !acpi_dev_resource_memory(res, &r);
+}
+
+/* LPSS main clock device. */
+static struct platform_device *lpss_clk_dev;
+
+static inline void lpt_register_clock_device(void)
+{
+	lpss_clk_dev = platform_device_register_simple("clk-lpt", -1, NULL, 0);
+}
+
+static int register_device_clock(struct acpi_device *adev,
+				 struct lpss_private_data *pdata)
+{
+	const struct lpss_device_desc *dev_desc = pdata->dev_desc;
+
+	if (!lpss_clk_dev)
+		lpt_register_clock_device();
+
+	if (!dev_desc->clk_parent || !pdata->mmio_base
+	    || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE)
+		return -ENODATA;
+
+	pdata->clk = clk_register_gate(NULL, dev_name(&adev->dev),
+				       dev_desc->clk_parent, 0,
+				       pdata->mmio_base + dev_desc->prv_offset,
+				       0, 0, NULL);
+	if (IS_ERR(pdata->clk))
+		return PTR_ERR(pdata->clk);
+
+	clk_register_clkdev(pdata->clk, NULL, dev_name(&adev->dev));
+	return 0;
+}
+
+static int acpi_lpss_create_device(struct acpi_device *adev,
+				   const struct acpi_device_id *id)
+{
+	struct lpss_device_desc *dev_desc;
+	struct lpss_private_data *pdata;
+	struct resource_list_entry *rentry;
+	struct list_head resource_list;
+	int ret;
+
+	dev_desc = (struct lpss_device_desc *)id->driver_data;
+	if (!dev_desc)
+		return acpi_create_platform_device(adev, id);
+
+	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&resource_list);
+	ret = acpi_dev_get_resources(adev, &resource_list, is_memory, NULL);
+	if (ret < 0)
+		goto err_out;
+
+	list_for_each_entry(rentry, &resource_list, node)
+		if (resource_type(&rentry->res) == IORESOURCE_MEM) {
+			pdata->mmio_size = resource_size(&rentry->res);
+			pdata->mmio_base = ioremap(rentry->res.start,
+						   pdata->mmio_size);
+			pdata->dev_desc = dev_desc;
+			break;
+		}
+
+	acpi_dev_free_resource_list(&resource_list);
+
+	if (dev_desc->clk_required) {
+		ret = register_device_clock(adev, pdata);
+		if (ret) {
+			/*
+			 * Skip the device, but don't terminate the namespace
+			 * scan.
+			 */
+			kfree(pdata);
+			return 0;
+		}
+	}
+
+	adev->driver_data = pdata;
+	ret = acpi_create_platform_device(adev, id);
+	if (ret > 0)
+		return ret;
+
+	adev->driver_data = NULL;
+
+ err_out:
+	kfree(pdata);
+	return ret;
+}
+
+static int lpss_reg_read(struct device *dev, unsigned int reg, u32 *val)
+{
+	struct acpi_device *adev;
+	struct lpss_private_data *pdata;
+	unsigned long flags;
+	int ret;
+
+	ret = acpi_bus_get_device(ACPI_HANDLE(dev), &adev);
+	if (WARN_ON(ret))
+		return ret;
+
+	spin_lock_irqsave(&dev->power.lock, flags);
+	if (pm_runtime_suspended(dev)) {
+		ret = -EAGAIN;
+		goto out;
+	}
+	pdata = acpi_driver_data(adev);
+	if (WARN_ON(!pdata || !pdata->mmio_base)) {
+		ret = -ENODEV;
+		goto out;
+	}
+	*val = readl(pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
+
+ out:
+	spin_unlock_irqrestore(&dev->power.lock, flags);
+	return ret;
+}
+
+static ssize_t lpss_ltr_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	u32 ltr_value = 0;
+	unsigned int reg;
+	int ret;
+
+	reg = strcmp(attr->attr.name, "auto_ltr") ? LPSS_SW_LTR : LPSS_AUTO_LTR;
+	ret = lpss_reg_read(dev, reg, &ltr_value);
+	if (ret)
+		return ret;
+
+	return snprintf(buf, PAGE_SIZE, "%08x\n", ltr_value);
+}
+
+static ssize_t lpss_ltr_mode_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	u32 ltr_mode = 0;
+	char *outstr;
+	int ret;
+
+	ret = lpss_reg_read(dev, LPSS_GENERAL, &ltr_mode);
+	if (ret)
+		return ret;
+
+	outstr = (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) ? "sw" : "auto";
+	return sprintf(buf, "%s\n", outstr);
+}
+
+static DEVICE_ATTR(auto_ltr, S_IRUSR, lpss_ltr_show, NULL);
+static DEVICE_ATTR(sw_ltr, S_IRUSR, lpss_ltr_show, NULL);
+static DEVICE_ATTR(ltr_mode, S_IRUSR, lpss_ltr_mode_show, NULL);
+
+static struct attribute *lpss_attrs[] = {
+	&dev_attr_auto_ltr.attr,
+	&dev_attr_sw_ltr.attr,
+	&dev_attr_ltr_mode.attr,
+	NULL,
+};
+
+static struct attribute_group lpss_attr_group = {
+	.attrs = lpss_attrs,
+	.name = "lpss_ltr",
+};
+
+static int acpi_lpss_platform_notify(struct notifier_block *nb,
+				     unsigned long action, void *data)
+{
+	struct platform_device *pdev = to_platform_device(data);
+	struct lpss_private_data *pdata;
+	struct acpi_device *adev;
+	const struct acpi_device_id *id;
+	int ret = 0;
+
+	id = acpi_match_device(acpi_lpss_device_ids, &pdev->dev);
+	if (!id || !id->driver_data)
+		return 0;
+
+	if (acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev))
+		return 0;
+
+	pdata = acpi_driver_data(adev);
+	if (!pdata || !pdata->mmio_base || !pdata->dev_desc->ltr_required)
+		return 0;
+
+	if (pdata->mmio_size < pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) {
+		dev_err(&pdev->dev, "MMIO size insufficient to access LTR\n");
+		return 0;
+	}
+
+	if (action == BUS_NOTIFY_ADD_DEVICE)
+		ret = sysfs_create_group(&pdev->dev.kobj, &lpss_attr_group);
+	else if (action == BUS_NOTIFY_DEL_DEVICE)
+		sysfs_remove_group(&pdev->dev.kobj, &lpss_attr_group);
+
+	return ret;
+}
+
+static struct notifier_block acpi_lpss_nb = {
+	.notifier_call = acpi_lpss_platform_notify,
+};
+
+static struct acpi_scan_handler lpss_handler = {
+	.ids = acpi_lpss_device_ids,
+	.attach = acpi_lpss_create_device,
+};
+
+void __init acpi_lpss_init(void)
+{
+	if (!lpt_clk_init()) {
+		bus_register_notifier(&platform_bus_type, &acpi_lpss_nb);
+		acpi_scan_add_handler(&lpss_handler);
+	}
+}

drivers/acpi/acpi_memhotplug.c

@@ -1,5 +1,7 @@
 /*
- * Copyright (C) 2004 Intel Corporation <naveen.b.s@intel.com>
+ * Copyright (C) 2004, 2013 Intel Corporation
+ * Author: Naveen B S <naveen.b.s@intel.com>
+ * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
  *
  * All rights reserved.
  *
@@ -25,14 +27,10 @@
  * ranges.
  */
 
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/memory_hotplug.h>
-#include <linux/slab.h>
 #include <linux/acpi.h>
-#include <acpi/acpi_drivers.h>
+#include <linux/memory_hotplug.h>
+
+#include "internal.h"
 
 #define ACPI_MEMORY_DEVICE_CLASS		"memory"
 #define ACPI_MEMORY_DEVICE_HID			"PNP0C80"
@@ -44,32 +42,28 @@
 #define 	PREFIX		"ACPI:memory_hp:"
 
 ACPI_MODULE_NAME("acpi_memhotplug");
-MODULE_AUTHOR("Naveen B S <naveen.b.s@intel.com>");
-MODULE_DESCRIPTION("Hotplug Mem Driver");
-MODULE_LICENSE("GPL");
 
 /* Memory Device States */
 #define MEMORY_INVALID_STATE	0
 #define MEMORY_POWER_ON_STATE	1
 #define MEMORY_POWER_OFF_STATE	2
 
-static int acpi_memory_device_add(struct acpi_device *device);
-static int acpi_memory_device_remove(struct acpi_device *device);
+static int acpi_memory_device_add(struct acpi_device *device,
+				  const struct acpi_device_id *not_used);
+static void acpi_memory_device_remove(struct acpi_device *device);
 
 static const struct acpi_device_id memory_device_ids[] = {
 	{ACPI_MEMORY_DEVICE_HID, 0},
 	{"", 0},
 };
-MODULE_DEVICE_TABLE(acpi, memory_device_ids);
 
-static struct acpi_driver acpi_memory_device_driver = {
-	.name = "acpi_memhotplug",
-	.class = ACPI_MEMORY_DEVICE_CLASS,
+static struct acpi_scan_handler memory_device_handler = {
 	.ids = memory_device_ids,
-	.ops = {
-		.add = acpi_memory_device_add,
-		.remove = acpi_memory_device_remove,
-		},
+	.attach = acpi_memory_device_add,
+	.detach = acpi_memory_device_remove,
+	.hotplug = {
+		.enabled = true,
+	},
 };
 
 struct acpi_memory_info {
@@ -79,7 +73,6 @@ struct acpi_memory_info {
 	unsigned short caching;	/* memory cache attribute */
 	unsigned short write_protect;	/* memory read/write attribute */
 	unsigned int enabled:1;
-	unsigned int failed:1;
 };
 
 struct acpi_memory_device {
@@ -153,48 +146,6 @@ acpi_memory_get_device_resources(struct acpi_memory_device *mem_device)
 	return 0;
 }
 
-static int acpi_memory_get_device(acpi_handle handle,
-				  struct acpi_memory_device **mem_device)
-{
-	struct acpi_device *device = NULL;
-	int result = 0;
-
-	acpi_scan_lock_acquire();
-
-	acpi_bus_get_device(handle, &device);
-	if (device)
-		goto end;
-
-	/*
-	 * Now add the notified device.  This creates the acpi_device
-	 * and invokes .add function
-	 */
-	result = acpi_bus_scan(handle);
-	if (result) {
-		acpi_handle_warn(handle, "ACPI namespace scan failed\n");
-		result = -EINVAL;
-		goto out;
-	}
-	result = acpi_bus_get_device(handle, &device);
-	if (result) {
-		acpi_handle_warn(handle, "Missing device object\n");
-		result = -EINVAL;
-		goto out;
-	}
-
- end:
-	*mem_device = acpi_driver_data(device);
-	if (!(*mem_device)) {
-		dev_err(&device->dev, "driver data not found\n");
-		result = -ENODEV;
-		goto out;
-	}
-
- out:
-	acpi_scan_lock_release();
-	return result;
-}
-
 static int acpi_memory_check_device(struct acpi_memory_device *mem_device)
 {
 	unsigned long long current_status;
@@ -249,13 +200,11 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)
 		 * returns -EEXIST. If add_memory() returns the other error, it
 		 * means that this memory block is not used by the kernel.
 		 */
-		if (result && result != -EEXIST) {
-			info->failed = 1;
+		if (result && result != -EEXIST)
 			continue;
-		}
 
-		if (!result)
-			info->enabled = 1;
+		info->enabled = 1;
+
 		/*
 		 * Add num_enable even if add_memory() returns -EEXIST, so the
 		 * device is bound to this driver.
@@ -286,16 +235,8 @@ static int acpi_memory_remove_memory(struct acpi_memory_device *mem_device)
 	nid = acpi_get_node(mem_device->device->handle);
 
 	list_for_each_entry_safe(info, n, &mem_device->res_list, list) {
-		if (info->failed)
-			/* The kernel does not use this memory block */
-			continue;
-
 		if (!info->enabled)
-			/*
-			 * The kernel uses this memory block, but it may be not
-			 * managed by us.
-			 */
-			return -EBUSY;
+			continue;
 
 		if (nid < 0)
 			nid = memory_add_physaddr_to_nid(info->start_addr);
@@ -310,95 +251,21 @@ static int acpi_memory_remove_memory(struct acpi_memory_device *mem_device)
 	return result;
 }
 
-static void acpi_memory_device_notify(acpi_handle handle, u32 event, void *data)
-{
-	struct acpi_memory_device *mem_device;
-	struct acpi_device *device;
-	struct acpi_eject_event *ej_event = NULL;
-	u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */
-	acpi_status status;
-
-	switch (event) {
-	case ACPI_NOTIFY_BUS_CHECK:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "\nReceived BUS CHECK notification for device\n"));
-		/* Fall Through */
-	case ACPI_NOTIFY_DEVICE_CHECK:
-		if (event == ACPI_NOTIFY_DEVICE_CHECK)
-			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-					  "\nReceived DEVICE CHECK notification for device\n"));
-		if (acpi_memory_get_device(handle, &mem_device)) {
-			acpi_handle_err(handle, "Cannot find driver data\n");
-			break;
-		}
-
-		ost_code = ACPI_OST_SC_SUCCESS;
-		break;
-
-	case ACPI_NOTIFY_EJECT_REQUEST:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "\nReceived EJECT REQUEST notification for device\n"));
-
-		status = AE_ERROR;
-		acpi_scan_lock_acquire();
-
-		if (acpi_bus_get_device(handle, &device)) {
-			acpi_handle_err(handle, "Device doesn't exist\n");
-			goto unlock;
-		}
-		mem_device = acpi_driver_data(device);
-		if (!mem_device) {
-			acpi_handle_err(handle, "Driver Data is NULL\n");
-			goto unlock;
-		}
-
-		ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL);
-		if (!ej_event) {
-			pr_err(PREFIX "No memory, dropping EJECT\n");
-			goto unlock;
-		}
-
-		get_device(&device->dev);
-		ej_event->device = device;
-		ej_event->event = ACPI_NOTIFY_EJECT_REQUEST;
-		/* The eject is carried out asynchronously. */
-		status = acpi_os_hotplug_execute(acpi_bus_hot_remove_device,
-						 ej_event);
-		if (ACPI_FAILURE(status)) {
-			put_device(&device->dev);
-			kfree(ej_event);
-		}
-
- unlock:
-		acpi_scan_lock_release();
-		if (ACPI_SUCCESS(status))
-			return;
-	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Unsupported event [0x%x]\n", event));
-
-		/* non-hotplug event; possibly handled by other handler */
-		return;
-	}
-
-	/* Inform firmware that the hotplug operation has completed */
-	(void) acpi_evaluate_hotplug_ost(handle, event, ost_code, NULL);
-}
-
 static void acpi_memory_device_free(struct acpi_memory_device *mem_device)
 {
 	if (!mem_device)
 		return;
 
 	acpi_memory_free_device_resources(mem_device);
+	mem_device->device->driver_data = NULL;
 	kfree(mem_device);
 }
 
-static int acpi_memory_device_add(struct acpi_device *device)
+static int acpi_memory_device_add(struct acpi_device *device,
+				  const struct acpi_device_id *not_used)
 {
+	struct acpi_memory_device *mem_device;
 	int result;
-	struct acpi_memory_device *mem_device = NULL;
-
 
 	if (!device)
 		return -EINVAL;
@@ -423,147 +290,36 @@ static int acpi_memory_device_add(struct acpi_device *device)
 	/* Set the device state */
 	mem_device->state = MEMORY_POWER_ON_STATE;
 
-	pr_debug("%s\n", acpi_device_name(device));
+	result = acpi_memory_check_device(mem_device);
+	if (result) {
+		acpi_memory_device_free(mem_device);
+		return 0;
+	}
 
-	if (!acpi_memory_check_device(mem_device)) {
-		/* call add_memory func */
-		result = acpi_memory_enable_device(mem_device);
-		if (result) {
-			dev_err(&device->dev,
-				"Error in acpi_memory_enable_device\n");
-			acpi_memory_device_free(mem_device);
-		}
+	result = acpi_memory_enable_device(mem_device);
+	if (result) {
+		dev_err(&device->dev, "acpi_memory_enable_device() error\n");
+		acpi_memory_device_free(mem_device);
+		return -ENODEV;
 	}
-	return result;
+
+	dev_dbg(&device->dev, "Memory device configured by ACPI\n");
+	return 1;
 }
 
-static int acpi_memory_device_remove(struct acpi_device *device)
+static void acpi_memory_device_remove(struct acpi_device *device)
 {
-	struct acpi_memory_device *mem_device = NULL;
-	int result;
+	struct acpi_memory_device *mem_device;
 
 	if (!device || !acpi_driver_data(device))
-		return -EINVAL;
+		return;
 
 	mem_device = acpi_driver_data(device);
-
-	result = acpi_memory_remove_memory(mem_device);
-	if (result)
-		return result;
-
+	acpi_memory_remove_memory(mem_device);
 	acpi_memory_device_free(mem_device);
-
-	return 0;
-}
-
-/*
- * Helper function to check for memory device
- */
-static acpi_status is_memory_device(acpi_handle handle)
-{
-	char *hardware_id;
-	acpi_status status;
-	struct acpi_device_info *info;
-
-	status = acpi_get_object_info(handle, &info);
-	if (ACPI_FAILURE(status))
-		return status;
-
-	if (!(info->valid & ACPI_VALID_HID)) {
-		kfree(info);
-		return AE_ERROR;
-	}
-
-	hardware_id = info->hardware_id.string;
-	if ((hardware_id == NULL) ||
-	    (strcmp(hardware_id, ACPI_MEMORY_DEVICE_HID)))
-		status = AE_ERROR;
-
-	kfree(info);
-	return status;
-}
-
-static acpi_status
-acpi_memory_register_notify_handler(acpi_handle handle,
-				    u32 level, void *ctxt, void **retv)
-{
-	acpi_status status;
-
-
-	status = is_memory_device(handle);
-	if (ACPI_FAILURE(status))
-		return AE_OK;	/* continue */
-
-	status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
-					     acpi_memory_device_notify, NULL);
-	/* continue */
-	return AE_OK;
-}
-
-static acpi_status
-acpi_memory_deregister_notify_handler(acpi_handle handle,
-				      u32 level, void *ctxt, void **retv)
-{
-	acpi_status status;
-
-
-	status = is_memory_device(handle);
-	if (ACPI_FAILURE(status))
-		return AE_OK;	/* continue */
-
-	status = acpi_remove_notify_handler(handle,
-					    ACPI_SYSTEM_NOTIFY,
-					    acpi_memory_device_notify);
-
-	return AE_OK;	/* continue */
-}
-
-static int __init acpi_memory_device_init(void)
-{
-	int result;
-	acpi_status status;
-
-
-	result = acpi_bus_register_driver(&acpi_memory_device_driver);
-
-	if (result < 0)
-		return -ENODEV;
-
-	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
-				     ACPI_UINT32_MAX,
-				     acpi_memory_register_notify_handler, NULL,
-				     NULL, NULL);
-
-	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status, "walk_namespace failed"));
-		acpi_bus_unregister_driver(&acpi_memory_device_driver);
-		return -ENODEV;
-	}
-
-	return 0;
 }
 
-static void __exit acpi_memory_device_exit(void)
+void __init acpi_memory_hotplug_init(void)
 {
-	acpi_status status;
-
-
-	/*
-	 * Adding this to un-install notification handlers for all the device
-	 * handles.
-	 */
-	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
-				     ACPI_UINT32_MAX,
-				     acpi_memory_deregister_notify_handler, NULL,
-				     NULL, NULL);
-
-	if (ACPI_FAILURE(status))
-		ACPI_EXCEPTION((AE_INFO, status, "walk_namespace failed"));
-
-	acpi_bus_unregister_driver(&acpi_memory_device_driver);
-
-	return;
+	acpi_scan_add_handler_with_hotplug(&memory_device_handler, "memory");
 }
-
-module_init(acpi_memory_device_init);
-module_exit(acpi_memory_device_exit);

drivers/acpi/acpi_pad.c

@@ -236,7 +236,7 @@ static int create_power_saving_task(void)
 	ps_tsks[ps_tsk_num] = kthread_run(power_saving_thread,
 		(void *)(unsigned long)ps_tsk_num,
 		"acpi_pad/%d", ps_tsk_num);
-	rc = IS_ERR(ps_tsks[ps_tsk_num]) ? PTR_ERR(ps_tsks[ps_tsk_num]) : 0;
+	rc = PTR_RET(ps_tsks[ps_tsk_num]);
 	if (!rc)
 		ps_tsk_num++;
 	else

drivers/acpi/acpi_platform.c

@@ -22,9 +22,6 @@
 
 ACPI_MODULE_NAME("platform");
 
-/* Flags for acpi_create_platform_device */
-#define ACPI_PLATFORM_CLK	BIT(0)
-
 /*
  * The following ACPI IDs are known to be suitable for representing as
  * platform devices.
@@ -33,33 +30,9 @@ static const struct acpi_device_id acpi_platform_device_ids[] = {
 
 	{ "PNP0D40" },
 
-	/* Haswell LPSS devices */
-	{ "INT33C0", ACPI_PLATFORM_CLK },
-	{ "INT33C1", ACPI_PLATFORM_CLK },
-	{ "INT33C2", ACPI_PLATFORM_CLK },
-	{ "INT33C3", ACPI_PLATFORM_CLK },
-	{ "INT33C4", ACPI_PLATFORM_CLK },
-	{ "INT33C5", ACPI_PLATFORM_CLK },
-	{ "INT33C6", ACPI_PLATFORM_CLK },
-	{ "INT33C7", ACPI_PLATFORM_CLK },
-
 	{ }
 };
 
-static int acpi_create_platform_clks(struct acpi_device *adev)
-{
-	static struct platform_device *pdev;
-
-	/* Create Lynxpoint LPSS clocks */
-	if (!pdev && !strncmp(acpi_device_hid(adev), "INT33C", 6)) {
-		pdev = platform_device_register_simple("clk-lpt", -1, NULL, 0);
-		if (IS_ERR(pdev))
-			return PTR_ERR(pdev);
-	}
-
-	return 0;
-}
-
 /**
  * acpi_create_platform_device - Create platform device for ACPI device node
  * @adev: ACPI device node to create a platform device for.
@@ -71,10 +44,9 @@ static int acpi_create_platform_clks(struct acpi_device *adev)
  *
  * Name of the platform device will be the same as @adev's.
  */
-static int acpi_create_platform_device(struct acpi_device *adev,
-				       const struct acpi_device_id *id)
+int acpi_create_platform_device(struct acpi_device *adev,
+				const struct acpi_device_id *id)
 {
-	unsigned long flags = id->driver_data;
 	struct platform_device *pdev = NULL;
 	struct acpi_device *acpi_parent;
 	struct platform_device_info pdevinfo;
@@ -83,14 +55,6 @@ static int acpi_create_platform_device(struct acpi_device *adev,
 	struct resource *resources;
 	int count;
 
-	if (flags & ACPI_PLATFORM_CLK) {
-		int ret = acpi_create_platform_clks(adev);
-		if (ret) {
-			dev_err(&adev->dev, "failed to create clocks\n");
-			return ret;
-		}
-	}
-
 	/* If the ACPI node already has a physical device attached, skip it. */
 	if (adev->physical_node_count)
 		return 0;

drivers/acpi/acpica/Makefile

@@ -83,6 +83,7 @@ acpi-$(ACPI_FUTURE_USAGE) += hwtimer.o
 acpi-y +=		\
 	nsaccess.o	\
 	nsalloc.o	\
+	nsconvert.o	\
 	nsdump.o	\
 	nseval.o	\
 	nsinit.o	\
@@ -160,6 +161,7 @@ acpi-y +=		\
 	utobject.o	\
 	utosi.o		\
 	utownerid.o	\
+	utpredef.o	\
 	utresrc.o	\
 	utstate.o	\
 	utstring.o	\

drivers/acpi/acpica/acglobal.h

@@ -224,6 +224,7 @@ ACPI_EXTERN u8 acpi_gbl_global_lock_pending;
  */
 ACPI_EXTERN acpi_spinlock acpi_gbl_gpe_lock;	/* For GPE data structs and registers */
 ACPI_EXTERN acpi_spinlock acpi_gbl_hardware_lock;	/* For ACPI H/W except GPE registers */
+ACPI_EXTERN acpi_spinlock acpi_gbl_reference_count_lock;
 
 /* Mutex for _OSI support */
 
@@ -413,10 +414,12 @@ ACPI_EXTERN u8 acpi_gbl_db_output_flags;
 
 #ifdef ACPI_DISASSEMBLER
 
-u8 ACPI_INIT_GLOBAL(acpi_gbl_ignore_noop_operator, FALSE);
+ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_ignore_noop_operator, FALSE);
 
 ACPI_EXTERN u8 acpi_gbl_db_opt_disasm;
 ACPI_EXTERN u8 acpi_gbl_db_opt_verbose;
+ACPI_EXTERN u8 acpi_gbl_num_external_methods;
+ACPI_EXTERN u32 acpi_gbl_resolved_external_methods;
 ACPI_EXTERN struct acpi_external_list *acpi_gbl_external_list;
 ACPI_EXTERN struct acpi_external_file *acpi_gbl_external_file_list;
 #endif

drivers/acpi/acpica/aclocal.h

@@ -294,6 +294,8 @@ acpi_status(*acpi_internal_method) (struct acpi_walk_state * walk_state);
 #define ACPI_BTYPE_OBJECTS_AND_REFS     0x0001FFFF	/* ARG or LOCAL */
 #define ACPI_BTYPE_ALL_OBJECTS          0x0000FFFF
 
+#pragma pack(1)
+
 /*
  * Information structure for ACPI predefined names.
  * Each entry in the table contains the following items:
@@ -304,7 +306,7 @@ acpi_status(*acpi_internal_method) (struct acpi_walk_state * walk_state);
  */
 struct acpi_name_info {
 	char name[ACPI_NAME_SIZE];
-	u8 param_count;
+	u16 argument_list;
 	u8 expected_btypes;
 };
 
@@ -327,7 +329,7 @@ struct acpi_package_info {
 	u8 count1;
 	u8 object_type2;
 	u8 count2;
-	u8 reserved;
+	u16 reserved;
 };
 
 /* Used for ACPI_PTYPE2_FIXED */
@@ -336,6 +338,7 @@ struct acpi_package_info2 {
 	u8 type;
 	u8 count;
 	u8 object_type[4];
+	u8 reserved;
 };
 
 /* Used for ACPI_PTYPE1_OPTION */
@@ -345,7 +348,7 @@ struct acpi_package_info3 {
 	u8 count;
 	u8 object_type[2];
 	u8 tail_object_type;
-	u8 reserved;
+	u16 reserved;
 };
 
 union acpi_predefined_info {
@@ -355,6 +358,10 @@ union acpi_predefined_info {
 	struct acpi_package_info3 ret_info3;
 };
 
+/* Reset to default packing */
+
+#pragma pack()
+
 /* Data block used during object validation */
 
 struct acpi_predefined_data {
@@ -363,6 +370,7 @@ struct acpi_predefined_data {
 	union acpi_operand_object *parent_package;
 	struct acpi_namespace_node *node;
 	u32 flags;
+	u32 return_btype;
 	u8 node_flags;
 };
 
@@ -371,6 +379,20 @@ struct acpi_predefined_data {
 #define ACPI_OBJECT_REPAIRED    1
 #define ACPI_OBJECT_WRAPPED     2
 
+/* Return object auto-repair info */
+
+typedef acpi_status(*acpi_object_converter) (union acpi_operand_object
+					     *original_object,
+					     union acpi_operand_object
+					     **converted_object);
+
+struct acpi_simple_repair_info {
+	char name[ACPI_NAME_SIZE];
+	u32 unexpected_btypes;
+	u32 package_index;
+	acpi_object_converter object_converter;
+};
+
 /*
  * Bitmapped return value types
  * Note: the actual data types must be contiguous, a loop in nspredef.c
@@ -1037,6 +1059,7 @@ struct acpi_external_list {
 	u16 length;
 	u8 type;
 	u8 flags;
+	u8 resolved;
 };
 
 /* Values for Flags field above */

drivers/acpi/acpica/acmacros.h

@@ -322,10 +322,12 @@
  * where a pointer to an object of type union acpi_operand_object can also
  * appear. This macro is used to distinguish them.
  *
- * The "Descriptor" field is the first field in both structures.
+ * The "DescriptorType" field is the second field in both structures.
  */
+#define ACPI_GET_DESCRIPTOR_PTR(d)      (((union acpi_descriptor *)(void *)(d))->common.common_pointer)
+#define ACPI_SET_DESCRIPTOR_PTR(d, p)   (((union acpi_descriptor *)(void *)(d))->common.common_pointer = (p))
 #define ACPI_GET_DESCRIPTOR_TYPE(d)     (((union acpi_descriptor *)(void *)(d))->common.descriptor_type)
-#define ACPI_SET_DESCRIPTOR_TYPE(d, t)  (((union acpi_descriptor *)(void *)(d))->common.descriptor_type = t)
+#define ACPI_SET_DESCRIPTOR_TYPE(d, t)  (((union acpi_descriptor *)(void *)(d))->common.descriptor_type = (t))
 
 /*
  * Macros for the master AML opcode table

drivers/acpi/acpica/acnamesp.h

@@ -166,6 +166,29 @@ void acpi_ns_delete_children(struct acpi_namespace_node *parent);
 
 int acpi_ns_compare_names(char *name1, char *name2);
 
+/*
+ * nsconvert - Dynamic object conversion routines
+ */
+acpi_status
+acpi_ns_convert_to_integer(union acpi_operand_object *original_object,
+			   union acpi_operand_object **return_object);
+
+acpi_status
+acpi_ns_convert_to_string(union acpi_operand_object *original_object,
+			  union acpi_operand_object **return_object);
+
+acpi_status
+acpi_ns_convert_to_buffer(union acpi_operand_object *original_object,
+			  union acpi_operand_object **return_object);
+
+acpi_status
+acpi_ns_convert_to_unicode(union acpi_operand_object *original_object,
+			   union acpi_operand_object **return_object);
+
+acpi_status
+acpi_ns_convert_to_resource(union acpi_operand_object *original_object,
+			    union acpi_operand_object **return_object);
+
 /*
  * nsdump - Namespace dump/print utilities
  */
@@ -208,10 +231,6 @@ acpi_ns_check_predefined_names(struct acpi_namespace_node *node,
 			       acpi_status return_status,
 			       union acpi_operand_object **return_object);
 
-const union acpi_predefined_info *acpi_ns_check_for_predefined_name(struct
-								    acpi_namespace_node
-								    *node);
-
 void
 acpi_ns_check_parameter_count(char *pathname,
 			      struct acpi_namespace_node *node,
@@ -289,7 +308,7 @@ acpi_ns_get_attached_data(struct acpi_namespace_node *node,
  * predefined methods/objects
  */
 acpi_status
-acpi_ns_repair_object(struct acpi_predefined_data *data,
+acpi_ns_simple_repair(struct acpi_predefined_data *data,
 		      u32 expected_btypes,
 		      u32 package_index,
 		      union acpi_operand_object **return_object_ptr);