[ARM] 4514/1: S3C: Rename DEBUG_S3C2410_PORT and DEBUG_S3C_UART

Rename DEBUG_S3C2410_PORT to DEBUG_S3C_PORT as well as
DEBUG_S3C2410_UART to DEBUG_S3C_UART as part of the updates
to moving to plat-s3c for S3C base support.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/Kconfig.debug

@@ -82,20 +82,20 @@ config DEBUG_CLPS711X_UART2
 	  output to the second serial port on these devices.  Saying N will
 	  cause the debug messages to appear on the first serial port.
 
-config DEBUG_S3C2410_PORT
-	depends on DEBUG_LL && ARCH_S3C2410
-	bool "Kernel low-level debugging messages via S3C2410 UART"
+config DEBUG_S3C_PORT
+	depends on DEBUG_LL && PLAT_S3C
+	bool "Kernel low-level debugging messages via S3C UART"
 	help
 	  Say Y here if you want debug print routines to go to one of the
-	  S3C2410 internal UARTs. The chosen UART must have been configured
+	  S3C internal UARTs. The chosen UART must have been configured
 	  before it is used.
 
-config DEBUG_S3C2410_UART
-	depends on ARCH_S3C2410
-	int "S3C2410 UART to use for low-level debug"
+config DEBUG_S3C_UART
+	depends on PLAT_S3C
+	int "S3C UART to use for low-level debug"
 	default "0"
 	help
-	  Choice for UART for kernel low-level using S3C2410 UARTS,
+	  Choice for UART for kernel low-level using S3C UARTS,
 	  should be between zero and two. The port must have been
 	  initialised by the boot-loader before use.
 

arch/arm/configs/s3c2410_defconfig

@@ -1392,8 +1392,8 @@ CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C2410_PORT=y
-CONFIG_DEBUG_S3C2410_UART=0
+CONFIG_DEBUG_S3C_PORT=y
+CONFIG_DEBUG_S3C_UART=0
 
 #
 # Security options

include/asm-arm/arch-s3c2410/debug-macro.S

@@ -24,8 +24,8 @@
 		tst	\rx, #1
 		ldreq	\rx, = S3C24XX_PA_UART
 		ldrne	\rx, = S3C24XX_VA_UART
-#if CONFIG_DEBUG_S3C2410_UART != 0
-		add	\rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C2410_UART)
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
 #endif
 	.endm