ARM: OMAP: Split plat/serial.h for omap1 and omap2+

For omap1, we'll keep mach/serial.h around for 8250.c hardware
workarounds. For omap2+, we no longer need mach/serial.h and
can make it local to mach-omap2.

Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap1/include/mach/debug-macro.S

@@ -13,7 +13,7 @@
 
 #include <linux/serial_reg.h>
 
-#include <plat/serial.h>
+#include "serial.h"
 
 		.pushsection .data
 omap_uart_phys:	.word	0x0

arch/arm/mach-omap1/include/mach/hardware.h

@@ -72,7 +72,7 @@ static inline u32 omap_cs3_phys(void)
 
 #endif	/* ifndef __ASSEMBLER__ */
 
-#include <plat/serial.h>
+#include <mach/serial.h>
 
 /*
  * ---------------------------------------------------------------------------

arch/arm/mach-omap1/include/mach/serial.h

@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#include <linux/init.h>
+
+/*
+ * Memory entry used for the DEBUG_LL UART configuration, relative to
+ * start of RAM. See also uncompress.h and debug-macro.S.
+ *
+ * Note that using a memory location for storing the UART configuration
+ * has at least two limitations:
+ *
+ * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
+ *    uncompress code could then partially overwrite itself
+ * 2. We assume printascii is called at least once before paging_init,
+ *    and addruart has a chance to read OMAP_UART_INFO
+ */
+#define OMAP_UART_INFO_OFS	0x3ffc
+
+/* OMAP1 serial ports */
+#define OMAP1_UART1_BASE	0xfffb0000
+#define OMAP1_UART2_BASE	0xfffb0800
+#define OMAP1_UART3_BASE	0xfffb9800
+
+#define OMAP_PORT_SHIFT		2
+#define OMAP7XX_PORT_SHIFT	0
+
+#define OMAP1510_BASE_BAUD	(12000000/16)
+#define OMAP16XX_BASE_BAUD	(48000000/16)
+
+/*
+ * DEBUG_LL port encoding stored into the UART1 scratchpad register by
+ * decomp_setup in uncompress.h
+ */
+#define OMAP1UART1		11
+#define OMAP1UART2		12
+#define OMAP1UART3		13
+
+#ifndef __ASSEMBLER__
+extern void omap_serial_init(void);
+#endif
+
+#endif

arch/arm/mach-omap1/include/mach/uncompress.h

@@ -23,7 +23,7 @@
 #include <asm/memory.h>
 #include <asm/mach-types.h>
 
-#include <plat/serial.h>
+#include "serial.h"
 
 #define MDR1_MODE_MASK			0x07
 

arch/arm/mach-omap2/board-rm680.c

@@ -25,7 +25,6 @@
 #include <plat/usb.h>
 #include "gpmc.h"
 #include "common.h"
-#include <plat/serial.h>
 
 #include "mux.h"
 #include "mmc.h"

arch/arm/mach-omap2/common.h

@@ -34,11 +34,10 @@
 
 #include <asm/proc-fns.h>
 
-#include <plat/serial.h>
-
 #include "../plat-omap/common.h"
 
 #include "i2c.h"
+#include "serial.h"
 
 #define OMAP_INTC_START		NR_IRQS
 

arch/arm/mach-omap2/include/mach/debug-macro.S

@@ -13,7 +13,7 @@
 
 #include <linux/serial_reg.h>
 
-#include <plat/serial.h>
+#include <../mach-omap2/serial.h>
 
 #define UART_OFFSET(addr)	((addr) & 0x00ffffff)
 

arch/arm/mach-omap2/include/mach/uncompress.h

@@ -23,7 +23,7 @@
 #include <asm/memory.h>
 #include <asm/mach-types.h>
 
-#include <plat/serial.h>
+#include <../mach-omap2/serial.h>
 
 #define MDR1_MODE_MASK			0x07
 

arch/arm/mach-omap2/io.c

@@ -25,7 +25,6 @@
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
 
-#include <plat/serial.h>
 #include <plat-omap/dma-omap.h>
 
 #include "../plat-omap/sram.h"
@@ -43,6 +42,7 @@
 #include "clock44xx.h"
 #include "omap-pm.h"
 #include "sdrc.h"
+#include "serial.h"
 
 /*
  * The machine specific code may provide the extra mapping besides the

arch/arm/mach-omap2/omap_hwmod_2420_data.c

@@ -29,6 +29,7 @@
 #include "prm-regbits-24xx.h"
 #include "i2c.h"
 #include "mmc.h"
+#include "serial.h"
 #include "wd_timer.h"
 
 /*

arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c

@@ -13,8 +13,6 @@
  */
 #include <asm/sizes.h>
 
-#include <plat/serial.h>
-
 #include "omap_hwmod.h"
 
 #include "omap_hwmod_common_data.h"

arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c

@@ -10,7 +10,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <plat/serial.h>
 #include <plat-omap/dma-omap.h>
 
 #include "../plat-omap/common.h"

arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c

@@ -13,11 +13,10 @@
  */
 #include <asm/sizes.h>
 
-#include <plat/serial.h>
-
 #include "omap_hwmod.h"
 #include "l3_2xxx.h"
 #include "l4_2xxx.h"
+#include "serial.h"
 
 #include "omap_hwmod_common_data.h"
 

arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c

@@ -9,7 +9,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <plat/serial.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <plat-omap/dma-omap.h>
 #include <plat/dmtimer.h>

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -20,8 +20,6 @@
 #include <linux/platform_data/gpio-omap.h>
 
 #include <plat-omap/dma-omap.h>
-#include <plat/serial.h>
-
 #include "l3_3xxx.h"
 #include "l4_3xxx.h"
 #include <linux/platform_data/asoc-ti-mcbsp.h>
@@ -41,6 +39,7 @@
 #include "i2c.h"
 #include "mmc.h"
 #include "wd_timer.h"
+#include "serial.h"
 
 /*
  * OMAP3xxx hardware module integration data

arch/arm/mach-omap2/serial.c

@@ -29,7 +29,6 @@
 
 #include <plat/omap-serial.h>
 #include <plat-omap/dma-omap.h>
-#include <plat/serial.h>
 
 #include "common.h"
 #include "omap_hwmod.h"
@@ -42,6 +41,7 @@
 #include "prm-regbits-34xx.h"
 #include "control.h"
 #include "mux.h"
+#include "serial.h"
 
 /*
  * NOTE: By default the serial auto_suspend timeout is disabled as it causes

arch/arm/plat-omap/include/plat/serial.h → arch/arm/mach-omap2/serial.h

@@ -29,11 +29,6 @@
  */
 #define OMAP_UART_INFO_OFS	0x3ffc
 
-/* OMAP1 serial ports */
-#define OMAP1_UART1_BASE	0xfffb0000
-#define OMAP1_UART2_BASE	0xfffb0800
-#define OMAP1_UART3_BASE	0xfffb9800
-
 /* OMAP2 serial ports */
 #define OMAP2_UART1_BASE	0x4806a000
 #define OMAP2_UART2_BASE	0x4806c000
@@ -76,20 +71,14 @@
 #define ZOOM_UART_VIRT		0xfa400000
 
 #define OMAP_PORT_SHIFT		2
-#define OMAP7XX_PORT_SHIFT	0
 #define ZOOM_PORT_SHIFT		1
 
-#define OMAP1510_BASE_BAUD	(12000000/16)
-#define OMAP16XX_BASE_BAUD	(48000000/16)
 #define OMAP24XX_BASE_BAUD	(48000000/16)
 
 /*
  * DEBUG_LL port encoding stored into the UART1 scratchpad register by
  * decomp_setup in uncompress.h
  */
-#define OMAP1UART1		11
-#define OMAP1UART2		12
-#define OMAP1UART3		13
 #define OMAP2UART1		21
 #define OMAP2UART2		22
 #define OMAP2UART3		23