|
|
@@ -1,8 +1,5 @@
|
|
|
if ARCH_AT91
|
|
|
|
|
|
-config HAVE_AT91_DATAFLASH_CARD
|
|
|
- bool
|
|
|
-
|
|
|
config HAVE_AT91_DBGU0
|
|
|
bool
|
|
|
|
|
|
@@ -93,394 +90,13 @@ config SOC_AT91SAM9N12
|
|
|
help
|
|
|
Select this if you are using Atmel's AT91SAM9N12 SoC.
|
|
|
|
|
|
-choice
|
|
|
- prompt "Atmel AT91 Processor Devices for non DT boards"
|
|
|
-
|
|
|
-config ARCH_AT91_NONE
|
|
|
- bool "None"
|
|
|
-
|
|
|
-config ARCH_AT91RM9200
|
|
|
- bool "AT91RM9200"
|
|
|
- select SOC_AT91RM9200
|
|
|
-
|
|
|
-config ARCH_AT91SAM9260
|
|
|
- bool "AT91SAM9260 or AT91SAM9XE"
|
|
|
- select SOC_AT91SAM9260
|
|
|
-
|
|
|
-config ARCH_AT91SAM9261
|
|
|
- bool "AT91SAM9261"
|
|
|
- select SOC_AT91SAM9261
|
|
|
-
|
|
|
-config ARCH_AT91SAM9G10
|
|
|
- bool "AT91SAM9G10"
|
|
|
- select SOC_AT91SAM9261
|
|
|
-
|
|
|
-config ARCH_AT91SAM9263
|
|
|
- bool "AT91SAM9263"
|
|
|
- select SOC_AT91SAM9263
|
|
|
-
|
|
|
-config ARCH_AT91SAM9RL
|
|
|
- bool "AT91SAM9RL"
|
|
|
- select SOC_AT91SAM9RL
|
|
|
-
|
|
|
-config ARCH_AT91SAM9G20
|
|
|
- bool "AT91SAM9G20"
|
|
|
- select SOC_AT91SAM9260
|
|
|
-
|
|
|
-config ARCH_AT91SAM9G45
|
|
|
- bool "AT91SAM9G45"
|
|
|
- select SOC_AT91SAM9G45
|
|
|
-
|
|
|
-config ARCH_AT91X40
|
|
|
- bool "AT91x40"
|
|
|
- depends on !MMU
|
|
|
- select ARCH_USES_GETTIMEOFFSET
|
|
|
- select MULTI_IRQ_HANDLER
|
|
|
- select SPARSE_IRQ
|
|
|
-
|
|
|
-endchoice
|
|
|
-
|
|
|
config AT91_PMC_UNIT
|
|
|
bool
|
|
|
default !ARCH_AT91X40
|
|
|
|
|
|
# ----------------------------------------------------------
|
|
|
|
|
|
-if ARCH_AT91RM9200
|
|
|
-
|
|
|
-comment "AT91RM9200 Board Type"
|
|
|
-
|
|
|
-config MACH_ONEARM
|
|
|
- bool "Ajeco 1ARM Single Board Computer"
|
|
|
- help
|
|
|
- Select this if you are using Ajeco's 1ARM Single Board Computer.
|
|
|
- <http://www.ajeco.fi/>
|
|
|
-
|
|
|
-config ARCH_AT91RM9200DK
|
|
|
- bool "Atmel AT91RM9200-DK Development board"
|
|
|
- select HAVE_AT91_DATAFLASH_CARD
|
|
|
- help
|
|
|
- Select this if you are using Atmel's AT91RM9200-DK Development board.
|
|
|
- (Discontinued)
|
|
|
-
|
|
|
-config MACH_AT91RM9200EK
|
|
|
- bool "Atmel AT91RM9200-EK Evaluation Kit"
|
|
|
- select HAVE_AT91_DATAFLASH_CARD
|
|
|
- help
|
|
|
- Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
|
|
|
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
|
|
|
-
|
|
|
-config MACH_CSB337
|
|
|
- bool "Cogent CSB337"
|
|
|
- help
|
|
|
- Select this if you are using Cogent's CSB337 board.
|
|
|
- <http://www.cogcomp.com/csb_csb337.htm>
|
|
|
-
|
|
|
-config MACH_CSB637
|
|
|
- bool "Cogent CSB637"
|
|
|
- help
|
|
|
- Select this if you are using Cogent's CSB637 board.
|
|
|
- <http://www.cogcomp.com/csb_csb637.htm>
|
|
|
-
|
|
|
-config MACH_CARMEVA
|
|
|
- bool "Conitec ARM&EVA"
|
|
|
- help
|
|
|
- Select this if you are using Conitec's AT91RM9200-MCU-Module.
|
|
|
- <http://www.conitec.net/english/linuxboard.php>
|
|
|
-
|
|
|
-config MACH_ATEB9200
|
|
|
- bool "Embest ATEB9200"
|
|
|
- help
|
|
|
- Select this if you are using Embest's ATEB9200 board.
|
|
|
- <http://www.embedinfo.com/english/product/ATEB9200.asp>
|
|
|
-
|
|
|
-config MACH_KB9200
|
|
|
- bool "KwikByte KB920x"
|
|
|
- help
|
|
|
- Select this if you are using KwikByte's KB920x board.
|
|
|
- <http://www.kwikbyte.com/KB9202.html>
|
|
|
-
|
|
|
-config MACH_PICOTUX2XX
|
|
|
- bool "picotux 200"
|
|
|
- help
|
|
|
- Select this if you are using a picotux 200.
|
|
|
- <http://www.picotux.com/>
|
|
|
-
|
|
|
-config MACH_KAFA
|
|
|
- bool "Sperry-Sun KAFA board"
|
|
|
- help
|
|
|
- Select this if you are using Sperry-Sun's KAFA board.
|
|
|
-
|
|
|
-config MACH_ECBAT91
|
|
|
- bool "emQbit ECB_AT91 SBC"
|
|
|
- select HAVE_AT91_DATAFLASH_CARD
|
|
|
- help
|
|
|
- Select this if you are using emQbit's ECB_AT91 board.
|
|
|
- <http://wiki.emqbit.com/free-ecb-at91>
|
|
|
-
|
|
|
-config MACH_YL9200
|
|
|
- bool "ucDragon YL-9200"
|
|
|
- help
|
|
|
- Select this if you are using the ucDragon YL-9200 board.
|
|
|
-
|
|
|
-config MACH_CPUAT91
|
|
|
- bool "Eukrea CPUAT91"
|
|
|
- help
|
|
|
- Select this if you are using the Eukrea Electromatique's
|
|
|
- CPUAT91 board <http://www.eukrea.com/>.
|
|
|
-
|
|
|
-config MACH_ECO920
|
|
|
- bool "eco920"
|
|
|
- help
|
|
|
- Select this if you are using the eco920 board
|
|
|
-
|
|
|
-config MACH_RSI_EWS
|
|
|
- bool "RSI Embedded Webserver"
|
|
|
- depends on ARCH_AT91RM9200
|
|
|
- help
|
|
|
- Select this if you are using RSIs EWS board.
|
|
|
-endif
|
|
|
-
|
|
|
-# ----------------------------------------------------------
|
|
|
-
|
|
|
-if ARCH_AT91SAM9260
|
|
|
-
|
|
|
-comment "AT91SAM9260 Variants"
|
|
|
-
|
|
|
-comment "AT91SAM9260 / AT91SAM9XE Board Type"
|
|
|
-
|
|
|
-config MACH_AT91SAM9260EK
|
|
|
- bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
|
|
|
- select HAVE_AT91_DATAFLASH_CARD
|
|
|
- help
|
|
|
- Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
|
|
|
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
|
|
|
-
|
|
|
-config MACH_CAM60
|
|
|
- bool "KwikByte KB9260 (CAM60) board"
|
|
|
- help
|
|
|
- Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
|
|
|
- <http://www.kwikbyte.com/KB9260.html>
|
|
|
-
|
|
|
-config MACH_SAM9_L9260
|
|
|
- bool "Olimex SAM9-L9260 board"
|
|
|
- select HAVE_AT91_DATAFLASH_CARD
|
|
|
- help
|
|
|
- Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
|
|
|
- <http://www.olimex.com/dev/sam9-L9260.html>
|
|
|
-
|
|
|
-config MACH_AFEB9260
|
|
|
- bool "Custom afeb9260 board v1"
|
|
|
- help
|
|
|
- Select this if you are using custom afeb9260 board based on
|
|
|
- open hardware design. Select this for revision 1 of the board.
|
|
|
- <svn://194.85.238.22/home/users/george/svn/arm9eb>
|
|
|
- <http://groups.google.com/group/arm9fpga-evolution-board>
|
|
|
-
|
|
|
-config MACH_USB_A9260
|
|
|
- bool "CALAO USB-A9260"
|
|
|
- help
|
|
|
- Select this if you are using a Calao Systems USB-A9260.
|
|
|
- <http://www.calao-systems.com>
|
|
|
-
|
|
|
-config MACH_QIL_A9260
|
|
|
- bool "CALAO QIL-A9260 board"
|
|
|
- help
|
|
|
- Select this if you are using a Calao Systems QIL-A9260 Board.
|
|
|
- <http://www.calao-systems.com>
|
|
|
-
|
|
|
-config MACH_CPU9260
|
|
|
- bool "Eukrea CPU9260 board"
|
|
|
- help
|
|
|
- Select this if you are using a Eukrea Electromatique's
|
|
|
- CPU9260 Board <http://www.eukrea.com/>
|
|
|
-
|
|
|
-config MACH_FLEXIBITY
|
|
|
- bool "Flexibity Connect board"
|
|
|
- help
|
|
|
- Select this if you are using Flexibity Connect board
|
|
|
- <http://www.flexibity.com>
|
|
|
-
|
|
|
-endif
|
|
|
-
|
|
|
-# ----------------------------------------------------------
|
|
|
-
|
|
|
-if ARCH_AT91SAM9261
|
|
|
-
|
|
|
-comment "AT91SAM9261 Board Type"
|
|
|
-
|
|
|
-config MACH_AT91SAM9261EK
|
|
|
- bool "Atmel AT91SAM9261-EK Evaluation Kit"
|
|
|
- select HAVE_AT91_DATAFLASH_CARD
|
|
|
- help
|
|
|
- Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
|
|
|
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
|
|
|
-
|
|
|
-endif
|
|
|
-
|
|
|
-# ----------------------------------------------------------
|
|
|
-
|
|
|
-if ARCH_AT91SAM9G10
|
|
|
-
|
|
|
-comment "AT91SAM9G10 Board Type"
|
|
|
-
|
|
|
-config MACH_AT91SAM9G10EK
|
|
|
- bool "Atmel AT91SAM9G10-EK Evaluation Kit"
|
|
|
- select HAVE_AT91_DATAFLASH_CARD
|
|
|
- help
|
|
|
- Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
|
|
|
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
|
|
|
-
|
|
|
-endif
|
|
|
-
|
|
|
-# ----------------------------------------------------------
|
|
|
-
|
|
|
-if ARCH_AT91SAM9263
|
|
|
-
|
|
|
-comment "AT91SAM9263 Board Type"
|
|
|
-
|
|
|
-config MACH_AT91SAM9263EK
|
|
|
- bool "Atmel AT91SAM9263-EK Evaluation Kit"
|
|
|
- select HAVE_AT91_DATAFLASH_CARD
|
|
|
- help
|
|
|
- Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
|
|
|
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
|
|
|
-
|
|
|
-config MACH_USB_A9263
|
|
|
- bool "CALAO USB-A9263"
|
|
|
- help
|
|
|
- Select this if you are using a Calao Systems USB-A9263.
|
|
|
- <http://www.calao-systems.com>
|
|
|
-
|
|
|
-endif
|
|
|
-
|
|
|
-# ----------------------------------------------------------
|
|
|
-
|
|
|
-if ARCH_AT91SAM9RL
|
|
|
-
|
|
|
-comment "AT91SAM9RL Board Type"
|
|
|
-
|
|
|
-config MACH_AT91SAM9RLEK
|
|
|
- bool "Atmel AT91SAM9RL-EK Evaluation Kit"
|
|
|
- help
|
|
|
- Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
|
|
|
-
|
|
|
-endif
|
|
|
-
|
|
|
-# ----------------------------------------------------------
|
|
|
-
|
|
|
-if ARCH_AT91SAM9G20
|
|
|
-
|
|
|
-comment "AT91SAM9G20 Board Type"
|
|
|
-
|
|
|
-config MACH_AT91SAM9G20EK
|
|
|
- bool "Atmel AT91SAM9G20-EK Evaluation Kit"
|
|
|
- select HAVE_AT91_DATAFLASH_CARD
|
|
|
- help
|
|
|
- Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
|
|
|
- that embeds only one SD/MMC slot.
|
|
|
-
|
|
|
-config MACH_AT91SAM9G20EK_2MMC
|
|
|
- depends on MACH_AT91SAM9G20EK
|
|
|
- bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
|
|
|
- help
|
|
|
- Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
|
|
|
- with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
|
|
|
- onwards.
|
|
|
- <http://www.atmel.com/tools/SAM9G20-EK.aspx>
|
|
|
-
|
|
|
-config MACH_CPU9G20
|
|
|
- bool "Eukrea CPU9G20 board"
|
|
|
- help
|
|
|
- Select this if you are using a Eukrea Electromatique's
|
|
|
- CPU9G20 Board <http://www.eukrea.com/>
|
|
|
-
|
|
|
-config MACH_ACMENETUSFOXG20
|
|
|
- bool "Acme Systems srl FOX Board G20"
|
|
|
- help
|
|
|
- Select this if you are using Acme Systems
|
|
|
- FOX Board G20 <http://www.acmesystems.it>
|
|
|
-
|
|
|
-config MACH_PORTUXG20
|
|
|
- bool "taskit PortuxG20"
|
|
|
- help
|
|
|
- Select this if you are using taskit's PortuxG20.
|
|
|
- <http://www.taskit.de/en/>
|
|
|
-
|
|
|
-config MACH_STAMP9G20
|
|
|
- bool "taskit Stamp9G20 CPU module"
|
|
|
- help
|
|
|
- Select this if you are using taskit's Stamp9G20 CPU module on its
|
|
|
- evaluation board.
|
|
|
- <http://www.taskit.de/en/>
|
|
|
-
|
|
|
-config MACH_PCONTROL_G20
|
|
|
- bool "PControl G20 CPU module"
|
|
|
- help
|
|
|
- Select this if you are using taskit's Stamp9G20 CPU module on this
|
|
|
- carrier board, beeing the decentralized unit of a building automation
|
|
|
- system; featuring nvram, eth-switch, iso-rs485, display, io
|
|
|
-
|
|
|
-config MACH_GSIA18S
|
|
|
- bool "GS_IA18_S board"
|
|
|
- help
|
|
|
- This enables support for the GS_IA18_S board
|
|
|
- produced by GeoSIG Ltd company. This is an internet accelerograph.
|
|
|
- <http://www.geosig.com>
|
|
|
-
|
|
|
-config MACH_USB_A9G20
|
|
|
- bool "CALAO USB-A9G20"
|
|
|
- depends on ARCH_AT91SAM9G20
|
|
|
- help
|
|
|
- Select this if you are using a Calao Systems USB-A9G20.
|
|
|
- <http://www.calao-systems.com>
|
|
|
-
|
|
|
-endif
|
|
|
-
|
|
|
-if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
|
|
|
-comment "AT91SAM9260/AT91SAM9G20 boards"
|
|
|
-
|
|
|
-config MACH_SNAPPER_9260
|
|
|
- bool "Bluewater Systems Snapper 9260/9G20 module"
|
|
|
- help
|
|
|
- Select this if you are using the Bluewater Systems Snapper 9260 or
|
|
|
- Snapper 9G20 modules.
|
|
|
- <http://www.bluewatersys.com/>
|
|
|
-endif
|
|
|
-
|
|
|
-# ----------------------------------------------------------
|
|
|
-
|
|
|
-if ARCH_AT91SAM9G45
|
|
|
-
|
|
|
-comment "AT91SAM9G45 Board Type"
|
|
|
-
|
|
|
-config MACH_AT91SAM9M10G45EK
|
|
|
- bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
|
|
|
- help
|
|
|
- Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
|
|
|
- Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
|
|
|
- families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
|
|
|
- <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
|
|
|
-
|
|
|
-endif
|
|
|
-
|
|
|
-# ----------------------------------------------------------
|
|
|
-
|
|
|
-if ARCH_AT91X40
|
|
|
-
|
|
|
-comment "AT91X40 Board Type"
|
|
|
-
|
|
|
-config MACH_AT91EB01
|
|
|
- bool "Atmel AT91EB01 Evaluation Kit"
|
|
|
- help
|
|
|
- Select this if you are using Atmel's AT91EB01 Evaluation Kit.
|
|
|
- It is also a popular target for simulators such as GDB's
|
|
|
- ARM simulator (commonly known as the ARMulator) and the
|
|
|
- Skyeye simulator.
|
|
|
-
|
|
|
-endif
|
|
|
-
|
|
|
-# ----------------------------------------------------------
|
|
|
+source arch/arm/mach-at91/Kconfig.non_dt
|
|
|
|
|
|
comment "Generic Board Type"
|
|
|
|
|
|
@@ -502,16 +118,6 @@ config MACH_AT91SAM_DT
|
|
|
|
|
|
# ----------------------------------------------------------
|
|
|
|
|
|
-comment "AT91 Board Options"
|
|
|
-
|
|
|
-config MTD_AT91_DATAFLASH_CARD
|
|
|
- bool "Enable DataFlash Card support"
|
|
|
- depends on HAVE_AT91_DATAFLASH_CARD
|
|
|
- help
|
|
|
- Enable support for the DataFlash card.
|
|
|
-
|
|
|
-# ----------------------------------------------------------
|
|
|
-
|
|
|
comment "AT91 Feature Selections"
|
|
|
|
|
|
config AT91_PROGRAMMABLE_CLOCKS
|
Jean-Christophe PLAGNIOL-VILLARD