|
@@ -1,275 +0,0 @@
|
|
|
-/*
|
|
|
- * Copyright (C) 2003 - 2009 NetXen, Inc.
|
|
|
- * All rights reserved.
|
|
|
- *
|
|
|
- * This program is free software; you can redistribute it and/or
|
|
|
- * modify it under the terms of the GNU General Public License
|
|
|
- * as published by the Free Software Foundation; either version 2
|
|
|
- * of the License, or (at your option) any later version.
|
|
|
- *
|
|
|
- * This program is distributed in the hope that it will be useful, but
|
|
|
- * WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
- * GNU General Public License for more details.
|
|
|
- *
|
|
|
- * You should have received a copy of the GNU General Public License
|
|
|
- * along with this program; if not, write to the Free Software
|
|
|
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
|
|
|
- * MA 02111-1307, USA.
|
|
|
- *
|
|
|
- * The full GNU General Public License is included in this distribution
|
|
|
- * in the file called LICENSE.
|
|
|
- *
|
|
|
- * Contact Information:
|
|
|
- * info@netxen.com
|
|
|
- * NetXen Inc,
|
|
|
- * 18922 Forge Drive
|
|
|
- * Cupertino, CA 95014-0701
|
|
|
- *
|
|
|
- */
|
|
|
-
|
|
|
-#include "netxen_nic.h"
|
|
|
-
|
|
|
-/*
|
|
|
- * netxen_niu_gbe_phy_read - read a register from the GbE PHY via
|
|
|
- * mii management interface.
|
|
|
- *
|
|
|
- * Note: The MII management interface goes through port 0.
|
|
|
- * Individual phys are addressed as follows:
|
|
|
- * @param phy [15:8] phy id
|
|
|
- * @param reg [7:0] register number
|
|
|
- *
|
|
|
- * @returns 0 on success
|
|
|
- * -1 on error
|
|
|
- *
|
|
|
- */
|
|
|
-int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long reg,
|
|
|
- __u32 * readval)
|
|
|
-{
|
|
|
- long timeout = 0;
|
|
|
- long result = 0;
|
|
|
- long restore = 0;
|
|
|
- long phy = adapter->physical_port;
|
|
|
- __u32 address;
|
|
|
- __u32 command;
|
|
|
- __u32 status;
|
|
|
- __u32 mac_cfg0;
|
|
|
-
|
|
|
- if (netxen_phy_lock(adapter) != 0)
|
|
|
- return -1;
|
|
|
-
|
|
|
- /*
|
|
|
- * MII mgmt all goes through port 0 MAC interface,
|
|
|
- * so it cannot be in reset
|
|
|
- */
|
|
|
-
|
|
|
- mac_cfg0 = NXRD32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0));
|
|
|
- if (netxen_gb_get_soft_reset(mac_cfg0)) {
|
|
|
- __u32 temp;
|
|
|
- temp = 0;
|
|
|
- netxen_gb_tx_reset_pb(temp);
|
|
|
- netxen_gb_rx_reset_pb(temp);
|
|
|
- netxen_gb_tx_reset_mac(temp);
|
|
|
- netxen_gb_rx_reset_mac(temp);
|
|
|
- if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), temp))
|
|
|
- return -EIO;
|
|
|
- restore = 1;
|
|
|
- }
|
|
|
-
|
|
|
- address = 0;
|
|
|
- netxen_gb_mii_mgmt_reg_addr(address, reg);
|
|
|
- netxen_gb_mii_mgmt_phy_addr(address, phy);
|
|
|
- if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0), address))
|
|
|
- return -EIO;
|
|
|
- command = 0; /* turn off any prior activity */
|
|
|
- if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0), command))
|
|
|
- return -EIO;
|
|
|
- /* send read command */
|
|
|
- netxen_gb_mii_mgmt_set_read_cycle(command);
|
|
|
- if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0), command))
|
|
|
- return -EIO;
|
|
|
-
|
|
|
- status = 0;
|
|
|
- do {
|
|
|
- status = NXRD32(adapter, NETXEN_NIU_GB_MII_MGMT_INDICATE(0));
|
|
|
- timeout++;
|
|
|
- } while ((netxen_get_gb_mii_mgmt_busy(status)
|
|
|
- || netxen_get_gb_mii_mgmt_notvalid(status))
|
|
|
- && (timeout++ < NETXEN_NIU_PHY_WAITMAX));
|
|
|
-
|
|
|
- if (timeout < NETXEN_NIU_PHY_WAITMAX) {
|
|
|
- *readval = NXRD32(adapter, NETXEN_NIU_GB_MII_MGMT_STATUS(0));
|
|
|
- result = 0;
|
|
|
- } else
|
|
|
- result = -1;
|
|
|
-
|
|
|
- if (restore)
|
|
|
- if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), mac_cfg0))
|
|
|
- return -EIO;
|
|
|
- netxen_phy_unlock(adapter);
|
|
|
- return result;
|
|
|
-}
|
|
|
-
|
|
|
-/*
|
|
|
- * netxen_niu_gbe_phy_write - write a register to the GbE PHY via
|
|
|
- * mii management interface.
|
|
|
- *
|
|
|
- * Note: The MII management interface goes through port 0.
|
|
|
- * Individual phys are addressed as follows:
|
|
|
- * @param phy [15:8] phy id
|
|
|
- * @param reg [7:0] register number
|
|
|
- *
|
|
|
- * @returns 0 on success
|
|
|
- * -1 on error
|
|
|
- *
|
|
|
- */
|
|
|
-int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, long reg,
|
|
|
- __u32 val)
|
|
|
-{
|
|
|
- long timeout = 0;
|
|
|
- long result = 0;
|
|
|
- long restore = 0;
|
|
|
- long phy = adapter->physical_port;
|
|
|
- __u32 address;
|
|
|
- __u32 command;
|
|
|
- __u32 status;
|
|
|
- __u32 mac_cfg0;
|
|
|
-
|
|
|
- /*
|
|
|
- * MII mgmt all goes through port 0 MAC interface, so it
|
|
|
- * cannot be in reset
|
|
|
- */
|
|
|
-
|
|
|
- mac_cfg0 = NXRD32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0));
|
|
|
- if (netxen_gb_get_soft_reset(mac_cfg0)) {
|
|
|
- __u32 temp;
|
|
|
- temp = 0;
|
|
|
- netxen_gb_tx_reset_pb(temp);
|
|
|
- netxen_gb_rx_reset_pb(temp);
|
|
|
- netxen_gb_tx_reset_mac(temp);
|
|
|
- netxen_gb_rx_reset_mac(temp);
|
|
|
-
|
|
|
- if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), temp))
|
|
|
- return -EIO;
|
|
|
- restore = 1;
|
|
|
- }
|
|
|
-
|
|
|
- command = 0; /* turn off any prior activity */
|
|
|
- if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0), command))
|
|
|
- return -EIO;
|
|
|
-
|
|
|
- address = 0;
|
|
|
- netxen_gb_mii_mgmt_reg_addr(address, reg);
|
|
|
- netxen_gb_mii_mgmt_phy_addr(address, phy);
|
|
|
- if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0), address))
|
|
|
- return -EIO;
|
|
|
-
|
|
|
- if (NXWR32(adapter, NETXEN_NIU_GB_MII_MGMT_CTRL(0), val))
|
|
|
- return -EIO;
|
|
|
-
|
|
|
- status = 0;
|
|
|
- do {
|
|
|
- status = NXRD32(adapter, NETXEN_NIU_GB_MII_MGMT_INDICATE(0));
|
|
|
- timeout++;
|
|
|
- } while ((netxen_get_gb_mii_mgmt_busy(status))
|
|
|
- && (timeout++ < NETXEN_NIU_PHY_WAITMAX));
|
|
|
-
|
|
|
- if (timeout < NETXEN_NIU_PHY_WAITMAX)
|
|
|
- result = 0;
|
|
|
- else
|
|
|
- result = -EIO;
|
|
|
-
|
|
|
- /* restore the state of port 0 MAC in case we tampered with it */
|
|
|
- if (restore)
|
|
|
- if (NXWR32(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0), mac_cfg0))
|
|
|
- return -EIO;
|
|
|
-
|
|
|
- return result;
|
|
|
-}
|
|
|
-
|
|
|
-int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port)
|
|
|
-{
|
|
|
- if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
|
|
|
- NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_1+(0x10000*port), 0x1447);
|
|
|
- NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_0+(0x10000*port), 0x5);
|
|
|
- }
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-/* Disable an XG interface */
|
|
|
-int netxen_niu_disable_xg_port(struct netxen_adapter *adapter)
|
|
|
-{
|
|
|
- __u32 mac_cfg;
|
|
|
- u32 port = adapter->physical_port;
|
|
|
-
|
|
|
- if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
|
|
|
- return 0;
|
|
|
-
|
|
|
- if (port > NETXEN_NIU_MAX_XG_PORTS)
|
|
|
- return -EINVAL;
|
|
|
-
|
|
|
- mac_cfg = 0;
|
|
|
- if (NXWR32(adapter,
|
|
|
- NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), mac_cfg))
|
|
|
- return -EIO;
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
|
|
|
- u32 mode)
|
|
|
-{
|
|
|
- __u32 reg;
|
|
|
- u32 port = adapter->physical_port;
|
|
|
-
|
|
|
- if (port > NETXEN_NIU_MAX_XG_PORTS)
|
|
|
- return -EINVAL;
|
|
|
-
|
|
|
- reg = NXRD32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port));
|
|
|
- if (mode == NETXEN_NIU_PROMISC_MODE)
|
|
|
- reg = (reg | 0x2000UL);
|
|
|
- else
|
|
|
- reg = (reg & ~0x2000UL);
|
|
|
-
|
|
|
- if (mode == NETXEN_NIU_ALLMULTI_MODE)
|
|
|
- reg = (reg | 0x1000UL);
|
|
|
- else
|
|
|
- reg = (reg & ~0x1000UL);
|
|
|
-
|
|
|
- NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), reg);
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|
|
|
-
|
|
|
-int netxen_p2_nic_set_mac_addr(struct netxen_adapter *adapter, u8 *addr)
|
|
|
-{
|
|
|
- u32 mac_hi, mac_lo;
|
|
|
- u32 reg_hi, reg_lo;
|
|
|
-
|
|
|
- u8 phy = adapter->physical_port;
|
|
|
- u8 phy_count = (adapter->ahw.port_type == NETXEN_NIC_XGBE) ?
|
|
|
- NETXEN_NIU_MAX_XG_PORTS : NETXEN_NIU_MAX_GBE_PORTS;
|
|
|
-
|
|
|
- if (phy >= phy_count)
|
|
|
- return -EINVAL;
|
|
|
-
|
|
|
- mac_lo = ((u32)addr[0] << 16) | ((u32)addr[1] << 24);
|
|
|
- mac_hi = addr[2] | ((u32)addr[3] << 8) |
|
|
|
- ((u32)addr[4] << 16) | ((u32)addr[5] << 24);
|
|
|
-
|
|
|
- if (adapter->ahw.port_type == NETXEN_NIC_XGBE) {
|
|
|
- reg_lo = NETXEN_NIU_XGE_STATION_ADDR_0_1 + (0x10000 * phy);
|
|
|
- reg_hi = NETXEN_NIU_XGE_STATION_ADDR_0_HI + (0x10000 * phy);
|
|
|
- } else {
|
|
|
- reg_lo = NETXEN_NIU_GB_STATION_ADDR_1(phy);
|
|
|
- reg_hi = NETXEN_NIU_GB_STATION_ADDR_0(phy);
|
|
|
- }
|
|
|
-
|
|
|
- /* write twice to flush */
|
|
|
- if (NXWR32(adapter, reg_lo, mac_lo) || NXWR32(adapter, reg_hi, mac_hi))
|
|
|
- return -EIO;
|
|
|
- if (NXWR32(adapter, reg_lo, mac_lo) || NXWR32(adapter, reg_hi, mac_hi))
|
|
|
- return -EIO;
|
|
|
-
|
|
|
- return 0;
|
|
|
-}
|