Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux

Pull SPI changes from Grant Likely:
 "Changes to both core spi code and spi device drivers.  The driver
  changes are the usual set of bug fixes and platform enablement.

  Core code changes include:

   - More intelligent assignment of SPI bus numbers when using DT

   - Common mechanism for using gpios as CS lines

   - Pull checks for bits_per_word and transfer speed out of drivers and
     into core code

   - Ensure temporary DMA buffers are DMA safe"

* tag 'spi-for-linus' of git://git.secretlab.ca/git/linux: (50 commits)
  spi: Document cs_gpios and cs_gpio in kernel-doc
  spi/of: Fix initialization of cs_gpios array
  spi/pxa2xx: add support for Lynxpoint SPI controllers
  spi/pxa2xx: add support for Intel Low Power Subsystem SPI
  spi/pxa2xx: add support for SPI_LOOP
  spi/pxa2xx: add support for runtime PM
  spi/pxa2xx: add support for DMA engine
  spi/pxa2xx: break out the private DMA API usage into a separate file
  spi/ath79: add shutdown handler
  spi/mips-lantiq: set SPI_MASTER_HALF_DUPLEX flag
  spi/mips-lantiq: make use of spi_finalize_current_message
  spi/bcm63xx: work around inability to keep CS up
  spi/davinci: use request_threaded_irq() to fix deadlock
  spi/orion: Use module_platform_driver()
  spi/bcm63xx: reject transfers unable to transfer
  spi: Ensure memory used for spi_write_then_read() is DMA safe
  spi/spi-mpc512x-psc: init mode bits supported by the driver
  spi/mpc512x-psc: don't use obsolet cell-index property
  spi: Remove erroneous __init, __exit and __exit_p() references in drivers
  spi/s3c64xx: fix checkpatch warnings and error
  ...

Documentation/devicetree/bindings/spi/sh-msiof.txt

@@ -0,0 +1,12 @@
+Renesas MSIOF spi controller
+
+Required properties:
+- compatible : 	"renesas,sh-msiof" for SuperH or
+		"renesas,sh-mobile-msiof" for SH Mobile series
+- reg : Offset and length of the register set for the device
+- interrupts : interrupt line used by MSIOF
+
+Optional properties:
+- num-cs		: total number of chip-selects
+- renesas,tx-fifo-size	: Overrides the default tx fifo size given in words
+- renesas,rx-fifo-size	: Overrides the default rx fifo size given in words

MAINTAINERS

@@ -7168,6 +7168,7 @@ F:	drivers/clk/spear/
 
 SPI SUBSYSTEM
 M:	Grant Likely <grant.likely@secretlab.ca>
+M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 L:	spi-devel-general@lists.sourceforge.net
 Q:	http://patchwork.kernel.org/project/spi-devel-general/list/
 T:	git git://git.secretlab.ca/git/linux-2.6.git

drivers/spi/Kconfig

@@ -297,9 +297,20 @@ config SPI_PPC4xx
 	help
 	  This selects a driver for the PPC4xx SPI Controller.
 
+config SPI_PXA2XX_PXADMA
+	bool "PXA2xx SSP legacy PXA DMA API support"
+	depends on SPI_PXA2XX && ARCH_PXA
+	help
+	  Enable PXA private legacy DMA API support. Note that this is
+	  deprecated in favor of generic DMA engine API.
+
+config SPI_PXA2XX_DMA
+	def_bool y
+	depends on SPI_PXA2XX && !SPI_PXA2XX_PXADMA
+
 config SPI_PXA2XX
 	tristate "PXA2xx SSP SPI master"
-	depends on (ARCH_PXA || (X86_32 && PCI)) && EXPERIMENTAL
+	depends on ARCH_PXA || PCI || ACPI
 	select PXA_SSP if ARCH_PXA
 	help
 	  This enables using a PXA2xx or Sodaville SSP port as a SPI master
@@ -307,7 +318,7 @@ config SPI_PXA2XX
 	  additional documentation can be found a Documentation/spi/pxa2xx.
 
 config SPI_PXA2XX_PCI
-	def_bool SPI_PXA2XX && X86_32 && PCI
+	def_tristate SPI_PXA2XX && PCI
 
 config SPI_RSPI
 	tristate "Renesas RSPI controller"

drivers/spi/Makefile

@@ -47,7 +47,10 @@ obj-$(CONFIG_SPI_OMAP24XX)		+= spi-omap2-mcspi.o
 obj-$(CONFIG_SPI_ORION)			+= spi-orion.o
 obj-$(CONFIG_SPI_PL022)			+= spi-pl022.o
 obj-$(CONFIG_SPI_PPC4xx)		+= spi-ppc4xx.o
-obj-$(CONFIG_SPI_PXA2XX)		+= spi-pxa2xx.o
+spi-pxa2xx-platform-objs		:= spi-pxa2xx.o
+spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_PXADMA)	+= spi-pxa2xx-pxadma.o
+spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA)	+= spi-pxa2xx-dma.o
+obj-$(CONFIG_SPI_PXA2XX)		+= spi-pxa2xx-platform.o
 obj-$(CONFIG_SPI_PXA2XX_PCI)		+= spi-pxa2xx-pci.o
 obj-$(CONFIG_SPI_RSPI)			+= spi-rspi.o
 obj-$(CONFIG_SPI_S3C24XX)		+= spi-s3c24xx-hw.o

drivers/spi/spi-altera.c

@@ -134,7 +134,7 @@ static int altera_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
 	hw->tx = t->tx_buf;
 	hw->rx = t->rx_buf;
 	hw->count = 0;
-	hw->bytes_per_word = (t->bits_per_word ? : spi->bits_per_word) / 8;
+	hw->bytes_per_word = t->bits_per_word / 8;
 	hw->len = t->len / hw->bytes_per_word;
 
 	if (hw->irq >= 0) {

drivers/spi/spi-ath79.c

@@ -24,17 +24,24 @@
 #include <linux/spi/spi_bitbang.h>
 #include <linux/bitops.h>
 #include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/err.h>
 
 #include <asm/mach-ath79/ar71xx_regs.h>
 #include <asm/mach-ath79/ath79_spi_platform.h>
 
 #define DRV_NAME	"ath79-spi"
 
+#define ATH79_SPI_RRW_DELAY_FACTOR	12000
+#define MHZ				(1000 * 1000)
+
 struct ath79_spi {
 	struct spi_bitbang	bitbang;
 	u32			ioc_base;
 	u32			reg_ctrl;
 	void __iomem		*base;
+	struct clk		*clk;
+	unsigned		rrw_delay;
 };
 
 static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg)
@@ -52,6 +59,12 @@ static inline struct ath79_spi *ath79_spidev_to_sp(struct spi_device *spi)
 	return spi_master_get_devdata(spi->master);
 }
 
+static inline void ath79_spi_delay(struct ath79_spi *sp, unsigned nsecs)
+{
+	if (nsecs > sp->rrw_delay)
+		ndelay(nsecs - sp->rrw_delay);
+}
+
 static void ath79_spi_chipselect(struct spi_device *spi, int is_active)
 {
 	struct ath79_spi *sp = ath79_spidev_to_sp(spi);
@@ -83,15 +96,8 @@ static void ath79_spi_chipselect(struct spi_device *spi, int is_active)
 
 }
 
-static int ath79_spi_setup_cs(struct spi_device *spi)
+static void ath79_spi_enable(struct ath79_spi *sp)
 {
-	struct ath79_spi *sp = ath79_spidev_to_sp(spi);
-	struct ath79_spi_controller_data *cdata;
-
-	cdata = spi->controller_data;
-	if (spi->chip_select && !cdata)
-		return -EINVAL;
-
 	/* enable GPIO mode */
 	ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
 
@@ -101,44 +107,48 @@ static int ath79_spi_setup_cs(struct spi_device *spi)
 
 	/* TODO: setup speed? */
 	ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
+}
 
-	if (spi->chip_select) {
-		int status = 0;
+static void ath79_spi_disable(struct ath79_spi *sp)
+{
+	/* restore CTRL register */
+	ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl);
+	/* disable GPIO mode */
+	ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
+}
 
-		status = gpio_request(cdata->gpio, dev_name(&spi->dev));
-		if (status)
-			return status;
+static int ath79_spi_setup_cs(struct spi_device *spi)
+{
+	struct ath79_spi_controller_data *cdata;
+	int status;
 
-		status = gpio_direction_output(cdata->gpio,
-					       spi->mode & SPI_CS_HIGH);
-		if (status) {
-			gpio_free(cdata->gpio);
-			return status;
-		}
-	} else {
+	cdata = spi->controller_data;
+	if (spi->chip_select && !cdata)
+		return -EINVAL;
+
+	status = 0;
+	if (spi->chip_select) {
+		unsigned long flags;
+
+		flags = GPIOF_DIR_OUT;
 		if (spi->mode & SPI_CS_HIGH)
-			sp->ioc_base |= AR71XX_SPI_IOC_CS0;
+			flags |= GPIOF_INIT_HIGH;
 		else
-			sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
-		ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
+			flags |= GPIOF_INIT_LOW;
+
+		status = gpio_request_one(cdata->gpio, flags,
+					  dev_name(&spi->dev));
 	}
 
-	return 0;
+	return status;
 }
 
 static void ath79_spi_cleanup_cs(struct spi_device *spi)
 {
-	struct ath79_spi *sp = ath79_spidev_to_sp(spi);
-
 	if (spi->chip_select) {
 		struct ath79_spi_controller_data *cdata = spi->controller_data;
 		gpio_free(cdata->gpio);
 	}
-
-	/* restore CTRL register */
-	ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl);
-	/* disable GPIO mode */
-	ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
 }
 
 static int ath79_spi_setup(struct spi_device *spi)
@@ -184,7 +194,11 @@ static u32 ath79_spi_txrx_mode0(struct spi_device *spi, unsigned nsecs,
 
 		/* setup MSB (to slave) on trailing edge */
 		ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out);
+		ath79_spi_delay(sp, nsecs);
 		ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK);
+		ath79_spi_delay(sp, nsecs);
+		if (bits == 1)
+			ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out);
 
 		word <<= 1;
 	}
@@ -198,6 +212,7 @@ static int ath79_spi_probe(struct platform_device *pdev)
 	struct ath79_spi *sp;
 	struct ath79_spi_platform_data *pdata;
 	struct resource	*r;
+	unsigned long rate;
 	int ret;
 
 	master = spi_alloc_master(&pdev->dev, sizeof(*sp));
@@ -236,12 +251,39 @@ static int ath79_spi_probe(struct platform_device *pdev)
 		goto err_put_master;
 	}
 
+	sp->clk = clk_get(&pdev->dev, "ahb");
+	if (IS_ERR(sp->clk)) {
+		ret = PTR_ERR(sp->clk);
+		goto err_unmap;
+	}
+
+	ret = clk_enable(sp->clk);
+	if (ret)
+		goto err_clk_put;
+
+	rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ);
+	if (!rate) {
+		ret = -EINVAL;
+		goto err_clk_disable;
+	}
+
+	sp->rrw_delay = ATH79_SPI_RRW_DELAY_FACTOR / rate;
+	dev_dbg(&pdev->dev, "register read/write delay is %u nsecs\n",
+		sp->rrw_delay);
+
+	ath79_spi_enable(sp);
 	ret = spi_bitbang_start(&sp->bitbang);
 	if (ret)
-		goto err_unmap;
+		goto err_disable;
 
 	return 0;
 
+err_disable:
+	ath79_spi_disable(sp);
+err_clk_disable:
+	clk_disable(sp->clk);
+err_clk_put:
+	clk_put(sp->clk);
 err_unmap:
 	iounmap(sp->base);
 err_put_master:
@@ -256,6 +298,9 @@ static int ath79_spi_remove(struct platform_device *pdev)
 	struct ath79_spi *sp = platform_get_drvdata(pdev);
 
 	spi_bitbang_stop(&sp->bitbang);
+	ath79_spi_disable(sp);
+	clk_disable(sp->clk);
+	clk_put(sp->clk);
 	iounmap(sp->base);
 	platform_set_drvdata(pdev, NULL);
 	spi_master_put(sp->bitbang.master);
@@ -263,9 +308,15 @@ static int ath79_spi_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static void ath79_spi_shutdown(struct platform_device *pdev)
+{
+	ath79_spi_remove(pdev);
+}
+
 static struct platform_driver ath79_spi_driver = {
 	.probe		= ath79_spi_probe,
 	.remove		= ath79_spi_remove,
+	.shutdown	= ath79_spi_shutdown,
 	.driver		= {
 		.name	= DRV_NAME,
 		.owner	= THIS_MODULE,

drivers/spi/spi-atmel.c

@@ -1088,7 +1088,7 @@ static struct platform_driver atmel_spi_driver = {
 	.suspend	= atmel_spi_suspend,
 	.resume		= atmel_spi_resume,
 	.probe		= atmel_spi_probe,
-	.remove		= __exit_p(atmel_spi_remove),
+	.remove		= atmel_spi_remove,
 };
 module_platform_driver(atmel_spi_driver);
 

drivers/spi/spi-au1550.c

@@ -717,7 +717,7 @@ static void au1550_spi_bits_handlers_set(struct au1550_spi *hw, int bpw)
 	}
 }
 
-static void __init au1550_spi_setup_psc_as_spi(struct au1550_spi *hw)
+static void au1550_spi_setup_psc_as_spi(struct au1550_spi *hw)
 {
 	u32 stat, cfg;
 
@@ -766,7 +766,7 @@ static void __init au1550_spi_setup_psc_as_spi(struct au1550_spi *hw)
 }
 
 
-static int __init au1550_spi_probe(struct platform_device *pdev)
+static int au1550_spi_probe(struct platform_device *pdev)
 {
 	struct au1550_spi *hw;
 	struct spi_master *master;
@@ -968,7 +968,7 @@ err_nomem:
 	return err;
 }
 
-static int __exit au1550_spi_remove(struct platform_device *pdev)
+static int au1550_spi_remove(struct platform_device *pdev)
 {
 	struct au1550_spi *hw = platform_get_drvdata(pdev);
 
@@ -997,7 +997,7 @@ static int __exit au1550_spi_remove(struct platform_device *pdev)
 MODULE_ALIAS("platform:au1550-spi");
 
 static struct platform_driver au1550_spi_drv = {
-	.remove = __exit_p(au1550_spi_remove),
+	.remove = au1550_spi_remove,
 	.driver = {
 		.name = "au1550-spi",
 		.owner = THIS_MODULE,

drivers/spi/spi-bcm63xx.c

@@ -37,6 +37,8 @@
 
 #define PFX		KBUILD_MODNAME
 
+#define BCM63XX_SPI_MAX_PREPEND		15
+
 struct bcm63xx_spi {
 	struct completion	done;
 
@@ -49,16 +51,10 @@ struct bcm63xx_spi {
 	unsigned int		msg_type_shift;
 	unsigned int		msg_ctl_width;
 
-	/* Data buffers */
-	const unsigned char	*tx_ptr;
-	unsigned char		*rx_ptr;
-
 	/* data iomem */
 	u8 __iomem		*tx_io;
 	const u8 __iomem	*rx_io;
 
-	int			remaining_bytes;
-
 	struct clk		*clk;
 	struct platform_device	*pdev;
 };
@@ -175,24 +171,17 @@ static int bcm63xx_spi_setup(struct spi_device *spi)
 	return 0;
 }
 
-/* Fill the TX FIFO with as many bytes as possible */
-static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs)
-{
-	u8 size;
-
-	/* Fill the Tx FIFO with as many bytes as possible */
-	size = bs->remaining_bytes < bs->fifo_size ? bs->remaining_bytes :
-		bs->fifo_size;
-	memcpy_toio(bs->tx_io, bs->tx_ptr, size);
-	bs->remaining_bytes -= size;
-}
-
-static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi,
-					struct spi_transfer *t)
+static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *first,
+				unsigned int num_transfers)
 {
 	struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
 	u16 msg_ctl;
 	u16 cmd;
+	u8 rx_tail;
+	unsigned int i, timeout = 0, prepend_len = 0, len = 0;
+	struct spi_transfer *t = first;
+	bool do_rx = false;
+	bool do_tx = false;
 
 	/* Disable the CMD_DONE interrupt */
 	bcm_spi_writeb(bs, 0, SPI_INT_MASK);
@@ -200,25 +189,45 @@ static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi,
 	dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
 		t->tx_buf, t->rx_buf, t->len);
 
-	/* Transmitter is inhibited */
-	bs->tx_ptr = t->tx_buf;
-	bs->rx_ptr = t->rx_buf;
+	if (num_transfers > 1 && t->tx_buf && t->len <= BCM63XX_SPI_MAX_PREPEND)
+		prepend_len = t->len;
 
-	if (t->tx_buf) {
-		bs->remaining_bytes = t->len;
-		bcm63xx_spi_fill_tx_fifo(bs);
+	/* prepare the buffer */
+	for (i = 0; i < num_transfers; i++) {
+		if (t->tx_buf) {
+			do_tx = true;
+			memcpy_toio(bs->tx_io + len, t->tx_buf, t->len);
+
+			/* don't prepend more than one tx */
+			if (t != first)
+				prepend_len = 0;
+		}
+
+		if (t->rx_buf) {
+			do_rx = true;
+			/* prepend is half-duplex write only */
+			if (t == first)
+				prepend_len = 0;
+		}
+
+		len += t->len;
+
+		t = list_entry(t->transfer_list.next, struct spi_transfer,
+			       transfer_list);
 	}
 
+	len -= prepend_len;
+
 	init_completion(&bs->done);
 
 	/* Fill in the Message control register */
-	msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT);
+	msg_ctl = (len << SPI_BYTE_CNT_SHIFT);
 
-	if (t->rx_buf && t->tx_buf)
+	if (do_rx && do_tx && prepend_len == 0)
 		msg_ctl |= (SPI_FD_RW << bs->msg_type_shift);
-	else if (t->rx_buf)
+	else if (do_rx)
 		msg_ctl |= (SPI_HD_R << bs->msg_type_shift);
-	else if (t->tx_buf)
+	else if (do_tx)
 		msg_ctl |= (SPI_HD_W << bs->msg_type_shift);
 
 	switch (bs->msg_ctl_width) {
@@ -232,14 +241,41 @@ static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi,
 
 	/* Issue the transfer */
 	cmd = SPI_CMD_START_IMMEDIATE;
-	cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
+	cmd |= (prepend_len << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
 	cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
 	bcm_spi_writew(bs, cmd, SPI_CMD);
 
 	/* Enable the CMD_DONE interrupt */
 	bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
 
-	return t->len - bs->remaining_bytes;
+	timeout = wait_for_completion_timeout(&bs->done, HZ);
+	if (!timeout)
+		return -ETIMEDOUT;
+
+	/* read out all data */
+	rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
+
+	if (do_rx && rx_tail != len)
+		return -EIO;
+
+	if (!rx_tail)
+		return 0;
+
+	len = 0;
+	t = first;
+	/* Read out all the data */
+	for (i = 0; i < num_transfers; i++) {
+		if (t->rx_buf)
+			memcpy_fromio(t->rx_buf, bs->rx_io + len, t->len);
+
+		if (t != first || prepend_len == 0)
+			len += t->len;
+
+		t = list_entry(t->transfer_list.next, struct spi_transfer,
+			       transfer_list);
+	}
+
+	return 0;
 }
 
 static int bcm63xx_spi_prepare_transfer(struct spi_master *master)
@@ -264,41 +300,76 @@ static int bcm63xx_spi_transfer_one(struct spi_master *master,
 					struct spi_message *m)
 {
 	struct bcm63xx_spi *bs = spi_master_get_devdata(master);
-	struct spi_transfer *t;
+	struct spi_transfer *t, *first = NULL;
 	struct spi_device *spi = m->spi;
 	int status = 0;
-	unsigned int timeout = 0;
-
+	unsigned int n_transfers = 0, total_len = 0;
+	bool can_use_prepend = false;
+
+	/*
+	 * This SPI controller does not support keeping CS active after a
+	 * transfer.
+	 * Work around this by merging as many transfers we can into one big
+	 * full-duplex transfers.
+	 */
 	list_for_each_entry(t, &m->transfers, transfer_list) {
-		unsigned int len = t->len;
-		u8 rx_tail;
-
 		status = bcm63xx_spi_check_transfer(spi, t);
 		if (status < 0)
 			goto exit;
 
-		/* configure adapter for a new transfer */
-		bcm63xx_spi_setup_transfer(spi, t);
+		if (!first)
+			first = t;
+
+		n_transfers++;
+		total_len += t->len;
+
+		if (n_transfers == 2 && !first->rx_buf && !t->tx_buf &&
+		    first->len <= BCM63XX_SPI_MAX_PREPEND)
+			can_use_prepend = true;
+		else if (can_use_prepend && t->tx_buf)
+			can_use_prepend = false;
+
+		/* we can only transfer one fifo worth of data */
+		if ((can_use_prepend &&
+		     total_len > (bs->fifo_size + BCM63XX_SPI_MAX_PREPEND)) ||
+		    (!can_use_prepend && total_len > bs->fifo_size)) {
+			dev_err(&spi->dev, "unable to do transfers larger than FIFO size (%i > %i)\n",
+				total_len, bs->fifo_size);
+			status = -EINVAL;
+			goto exit;
+		}
+
+		/* all combined transfers have to have the same speed */
+		if (t->speed_hz != first->speed_hz) {
+			dev_err(&spi->dev, "unable to change speed between transfers\n");
+			status = -EINVAL;
+			goto exit;
+		}
 
-		while (len) {
-			/* send the data */
-			len -= bcm63xx_txrx_bufs(spi, t);
+		/* CS will be deasserted directly after transfer */
+		if (t->delay_usecs) {
+			dev_err(&spi->dev, "unable to keep CS asserted after transfer\n");
+			status = -EINVAL;
+			goto exit;
+		}
+
+		if (t->cs_change ||
+		    list_is_last(&t->transfer_list, &m->transfers)) {
+			/* configure adapter for a new transfer */
+			bcm63xx_spi_setup_transfer(spi, first);
 
-			timeout = wait_for_completion_timeout(&bs->done, HZ);
-			if (!timeout) {
-				status = -ETIMEDOUT;
+			/* send the data */
+			status = bcm63xx_txrx_bufs(spi, first, n_transfers);
+			if (status)
 				goto exit;
-			}
 
-			/* read out all data */
-			rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
+			m->actual_length += total_len;
 
-			/* Read out all the data */
-			if (rx_tail)
-				memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail);
+			first = NULL;
+			n_transfers = 0;
+			total_len = 0;
+			can_use_prepend = false;
 		}
-
-		m->actual_length += t->len;
 	}
 exit:
 	m->status = status;

drivers/spi/spi-bfin-sport.c

@@ -416,8 +416,7 @@ bfin_sport_spi_pump_transfers(unsigned long data)
 	drv_data->cs_change = transfer->cs_change;
 
 	/* Bits per word setup */
-	bits_per_word = transfer->bits_per_word ? :
-		message->spi->bits_per_word ? : 8;
+	bits_per_word = transfer->bits_per_word;
 	if (bits_per_word % 16 == 0)
 		drv_data->ops = &bfin_sport_transfer_ops_u16;
 	else

drivers/spi/spi-bfin5xx.c

@@ -642,8 +642,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
 	drv_data->cs_change = transfer->cs_change;
 
 	/* Bits per word setup */
-	bits_per_word = transfer->bits_per_word ? :
-		message->spi->bits_per_word ? : 8;
+	bits_per_word = transfer->bits_per_word;
 	if (bits_per_word % 16 == 0) {
 		drv_data->n_bytes = bits_per_word/8;
 		drv_data->len = (transfer->len) >> 1;
@@ -1274,7 +1273,7 @@ static int bfin_spi_destroy_queue(struct bfin_spi_master_data *drv_data)
 	return 0;
 }
 
-static int __init bfin_spi_probe(struct platform_device *pdev)
+static int bfin_spi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct bfin5xx_spi_master *platform_info;

drivers/spi/spi-bitbang.c

@@ -69,7 +69,7 @@ static unsigned bitbang_txrx_8(
 	unsigned		ns,
 	struct spi_transfer	*t
 ) {
-	unsigned		bits = t->bits_per_word ? : spi->bits_per_word;
+	unsigned		bits = t->bits_per_word;
 	unsigned		count = t->len;
 	const u8		*tx = t->tx_buf;
 	u8			*rx = t->rx_buf;
@@ -95,7 +95,7 @@ static unsigned bitbang_txrx_16(
 	unsigned		ns,
 	struct spi_transfer	*t
 ) {
-	unsigned		bits = t->bits_per_word ? : spi->bits_per_word;
+	unsigned		bits = t->bits_per_word;
 	unsigned		count = t->len;
 	const u16		*tx = t->tx_buf;
 	u16			*rx = t->rx_buf;
@@ -121,7 +121,7 @@ static unsigned bitbang_txrx_32(
 	unsigned		ns,
 	struct spi_transfer	*t
 ) {
-	unsigned		bits = t->bits_per_word ? : spi->bits_per_word;
+	unsigned		bits = t->bits_per_word;
 	unsigned		count = t->len;
 	const u32		*tx = t->tx_buf;
 	u32			*rx = t->rx_buf;
@@ -427,40 +427,41 @@ EXPORT_SYMBOL_GPL(spi_bitbang_transfer);
  */
 int spi_bitbang_start(struct spi_bitbang *bitbang)
 {
-	int	status;
+	struct spi_master *master = bitbang->master;
+	int status;
 
-	if (!bitbang->master || !bitbang->chipselect)
+	if (!master || !bitbang->chipselect)
 		return -EINVAL;
 
 	INIT_WORK(&bitbang->work, bitbang_work);
 	spin_lock_init(&bitbang->lock);
 	INIT_LIST_HEAD(&bitbang->queue);
 
-	if (!bitbang->master->mode_bits)
-		bitbang->master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags;
+	if (!master->mode_bits)
+		master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags;
 
-	if (!bitbang->master->transfer)
-		bitbang->master->transfer = spi_bitbang_transfer;
+	if (!master->transfer)
+		master->transfer = spi_bitbang_transfer;
 	if (!bitbang->txrx_bufs) {
 		bitbang->use_dma = 0;
 		bitbang->txrx_bufs = spi_bitbang_bufs;
-		if (!bitbang->master->setup) {
+		if (!master->setup) {
 			if (!bitbang->setup_transfer)
 				bitbang->setup_transfer =
 					 spi_bitbang_setup_transfer;
-			bitbang->master->setup = spi_bitbang_setup;
-			bitbang->master->cleanup = spi_bitbang_cleanup;
+			master->setup = spi_bitbang_setup;
+			master->cleanup = spi_bitbang_cleanup;
 		}
-	} else if (!bitbang->master->setup)
+	} else if (!master->setup)
 		return -EINVAL;
-	if (bitbang->master->transfer == spi_bitbang_transfer &&
+	if (master->transfer == spi_bitbang_transfer &&
 			!bitbang->setup_transfer)
 		return -EINVAL;
 
 	/* this task is the only thing to touch the SPI bits */
 	bitbang->busy = 0;
 	bitbang->workqueue = create_singlethread_workqueue(
-			dev_name(bitbang->master->dev.parent));
+			dev_name(master->dev.parent));
 	if (bitbang->workqueue == NULL) {
 		status = -EBUSY;
 		goto err1;
@@ -469,7 +470,7 @@ int spi_bitbang_start(struct spi_bitbang *bitbang)
 	/* driver may get busy before register() returns, especially
 	 * if someone registered boardinfo for devices
 	 */
-	status = spi_register_master(bitbang->master);
+	status = spi_register_master(master);
 	if (status < 0)
 		goto err2;
 

drivers/spi/spi-clps711x.c

@@ -68,7 +68,7 @@ static int spi_clps711x_setup_xfer(struct spi_device *spi,
 				   struct spi_transfer *xfer)
 {
 	u32 speed = xfer->speed_hz ? : spi->max_speed_hz;
-	u8 bpw = xfer->bits_per_word ? : spi->bits_per_word;
+	u8 bpw = xfer->bits_per_word;
 	struct spi_clps711x_data *hw = spi_master_get_devdata(spi->master);
 
 	if (bpw != 8) {

drivers/spi/spi-coldfire-qspi.c

@@ -329,8 +329,7 @@ static int mcfqspi_transfer_one_message(struct spi_master *master,
 		mcfqspi_cs_select(mcfqspi, spi->chip_select, cs_high);
 
 		mcfqspi_wr_qir(mcfqspi, MCFQSPI_QIR_SPIFE);
-		if ((t->bits_per_word ? t->bits_per_word :
-					spi->bits_per_word) == 8)
+		if (t->bits_per_word == 8)
 			mcfqspi_transfer_msg8(mcfqspi, t->len, t->tx_buf,
 					t->rx_buf);
 		else

drivers/spi/spi-davinci.c

@@ -28,6 +28,8 @@
 #include <linux/dmaengine.h>
 #include <linux/dma-mapping.h>
 #include <linux/edma.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
 #include <linux/slab.h>
@@ -135,7 +137,7 @@ struct davinci_spi {
 	int			dma_rx_chnum;
 	int			dma_tx_chnum;
 
-	struct davinci_spi_platform_data *pdata;
+	struct davinci_spi_platform_data pdata;
 
 	void			(*get_rx)(u32 rx_data, struct davinci_spi *);
 	u32			(*get_tx)(struct davinci_spi *);
@@ -213,7 +215,7 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value)
 	bool gpio_chipsel = false;
 
 	dspi = spi_master_get_devdata(spi->master);
-	pdata = dspi->pdata;
+	pdata = &dspi->pdata;
 
 	if (pdata->chip_sel && chip_sel < pdata->num_chipselect &&
 				pdata->chip_sel[chip_sel] != SPI_INTERN_CS)
@@ -392,7 +394,7 @@ static int davinci_spi_setup(struct spi_device *spi)
 	struct davinci_spi_platform_data *pdata;
 
 	dspi = spi_master_get_devdata(spi->master);
-	pdata = dspi->pdata;
+	pdata = &dspi->pdata;
 
 	/* if bits per word length is zero then set it default 8 */
 	if (!spi->bits_per_word)
@@ -534,7 +536,7 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
 	struct scatterlist sg_rx, sg_tx;
 
 	dspi = spi_master_get_devdata(spi->master);
-	pdata = dspi->pdata;
+	pdata = &dspi->pdata;
 	spicfg = (struct davinci_spi_config *)spi->controller_data;
 	if (!spicfg)
 		spicfg = &davinci_spi_default_cfg;
@@ -699,6 +701,19 @@ err_alloc_dummy_buf:
 	return ret;
 }
 
+/**
+ * dummy_thread_fn - dummy thread function
+ * @irq: IRQ number for this SPI Master
+ * @context_data: structure for SPI Master controller davinci_spi
+ *
+ * This is to satisfy the request_threaded_irq() API so that the irq
+ * handler is called in interrupt context.
+ */
+static irqreturn_t dummy_thread_fn(s32 irq, void *data)
+{
+	return IRQ_HANDLED;
+}
+
 /**
  * davinci_spi_irq - Interrupt handler for SPI Master Controller
  * @irq: IRQ number for this SPI Master
@@ -758,6 +773,70 @@ rx_dma_failed:
 	return r;
 }
 
+#if defined(CONFIG_OF)
+static const struct of_device_id davinci_spi_of_match[] = {
+	{
+		.compatible = "ti,dm644x-spi",
+	},
+	{
+		.compatible = "ti,da8xx-spi",
+		.data = (void *)SPI_VERSION_2,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, davini_spi_of_match);
+
+/**
+ * spi_davinci_get_pdata - Get platform data from DTS binding
+ * @pdev: ptr to platform data
+ * @dspi: ptr to driver data
+ *
+ * Parses and populates pdata in dspi from device tree bindings.
+ *
+ * NOTE: Not all platform data params are supported currently.
+ */
+static int spi_davinci_get_pdata(struct platform_device *pdev,
+			struct davinci_spi *dspi)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct davinci_spi_platform_data *pdata;
+	unsigned int num_cs, intr_line = 0;
+	const struct of_device_id *match;
+
+	pdata = &dspi->pdata;
+
+	pdata->version = SPI_VERSION_1;
+	match = of_match_device(of_match_ptr(davinci_spi_of_match),
+				&pdev->dev);
+	if (!match)
+		return -ENODEV;
+
+	/* match data has the SPI version number for SPI_VERSION_2 */
+	if (match->data == (void *)SPI_VERSION_2)
+		pdata->version = SPI_VERSION_2;
+
+	/*
+	 * default num_cs is 1 and all chipsel are internal to the chip
+	 * indicated by chip_sel being NULL. GPIO based CS is not
+	 * supported yet in DT bindings.
+	 */
+	num_cs = 1;
+	of_property_read_u32(node, "num-cs", &num_cs);
+	pdata->num_chipselect = num_cs;
+	of_property_read_u32(node, "ti,davinci-spi-intr-line", &intr_line);
+	pdata->intr_line = intr_line;
+	return 0;
+}
+#else
+#define davinci_spi_of_match NULL
+static struct davinci_spi_platform_data
+	*spi_davinci_get_pdata(struct platform_device *pdev,
+		struct davinci_spi *dspi)
+{
+	return -ENODEV;
+}
+#endif
+
 /**
  * davinci_spi_probe - probe function for SPI Master Controller
  * @pdev: platform_device structure which contains plateform specific data
@@ -780,12 +859,6 @@ static int davinci_spi_probe(struct platform_device *pdev)
 	int i = 0, ret = 0;
 	u32 spipc0;
 
-	pdata = pdev->dev.platform_data;
-	if (pdata == NULL) {
-		ret = -ENODEV;
-		goto err;
-	}
-
 	master = spi_alloc_master(&pdev->dev, sizeof(struct davinci_spi));
 	if (master == NULL) {
 		ret = -ENOMEM;
@@ -800,6 +873,19 @@ static int davinci_spi_probe(struct platform_device *pdev)
 		goto free_master;
 	}
 
+	if (pdev->dev.platform_data) {
+		pdata = pdev->dev.platform_data;
+		dspi->pdata = *pdata;
+	} else {
+		/* update dspi pdata with that from the DT */
+		ret = spi_davinci_get_pdata(pdev, dspi);
+		if (ret < 0)
+			goto free_master;
+	}
+
+	/* pdata in dspi is now updated and point pdata to that */
+	pdata = &dspi->pdata;
+
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (r == NULL) {
 		ret = -ENOENT;
@@ -807,7 +893,6 @@ static int davinci_spi_probe(struct platform_device *pdev)
 	}
 
 	dspi->pbase = r->start;
-	dspi->pdata = pdata;
 
 	mem = request_mem_region(r->start, resource_size(r), pdev->name);
 	if (mem == NULL) {
@@ -827,8 +912,8 @@ static int davinci_spi_probe(struct platform_device *pdev)
 		goto unmap_io;
 	}
 
-	ret = request_irq(dspi->irq, davinci_spi_irq, 0, dev_name(&pdev->dev),
-									dspi);
+	ret = request_threaded_irq(dspi->irq, davinci_spi_irq, dummy_thread_fn,
+				 0, dev_name(&pdev->dev), dspi);
 	if (ret)
 		goto unmap_io;
 
@@ -843,8 +928,9 @@ static int davinci_spi_probe(struct platform_device *pdev)
 		ret = -ENODEV;
 		goto put_master;
 	}
-	clk_enable(dspi->clk);
+	clk_prepare_enable(dspi->clk);
 
+	master->dev.of_node = pdev->dev.of_node;
 	master->bus_num = pdev->id;
 	master->num_chipselect = pdata->num_chipselect;
 	master->setup = davinci_spi_setup;
@@ -927,7 +1013,7 @@ free_dma:
 	dma_release_channel(dspi->dma_rx);
 	dma_release_channel(dspi->dma_tx);
 free_clk:
-	clk_disable(dspi->clk);
+	clk_disable_unprepare(dspi->clk);
 	clk_put(dspi->clk);
 put_master:
 	spi_master_put(master);
@@ -963,7 +1049,7 @@ static int davinci_spi_remove(struct platform_device *pdev)
 
 	spi_bitbang_stop(&dspi->bitbang);
 
-	clk_disable(dspi->clk);
+	clk_disable_unprepare(dspi->clk);
 	clk_put(dspi->clk);
 	spi_master_put(master);
 	free_irq(dspi->irq, dspi);
@@ -978,6 +1064,7 @@ static struct platform_driver davinci_spi_driver = {
 	.driver = {
 		.name = "spi_davinci",
 		.owner = THIS_MODULE,
+		.of_match_table = davinci_spi_of_match,
 	},
 	.probe = davinci_spi_probe,
 	.remove = davinci_spi_remove,

drivers/spi/spi-ep93xx.c

@@ -446,7 +446,7 @@ static inline int bits_per_word(const struct ep93xx_spi *espi)
 	struct spi_message *msg = espi->current_msg;
 	struct spi_transfer *t = msg->state;
 
-	return t->bits_per_word ? t->bits_per_word : msg->spi->bits_per_word;
+	return t->bits_per_word;
 }
 
 static void ep93xx_do_write(struct ep93xx_spi *espi, struct spi_transfer *t)

drivers/spi/spi-falcon.c

@@ -398,7 +398,7 @@ static int falcon_sflash_xfer_one(struct spi_master *master,
 	}
 
 	m->status = ret;
-	m->complete(m->context);
+	spi_finalize_current_message(master);
 
 	return 0;
 }
@@ -423,6 +423,7 @@ static int falcon_sflash_probe(struct platform_device *pdev)
 
 	master->mode_bits = SPI_MODE_3;
 	master->num_chipselect = 1;
+	master->flags = SPI_MASTER_HALF_DUPLEX;
 	master->bus_num = -1;
 	master->setup = falcon_sflash_setup;
 	master->prepare_transfer_hardware = falcon_sflash_prepare_xfer;

drivers/spi/spi-gpio.c

@@ -365,9 +365,26 @@ static int spi_gpio_probe_dt(struct platform_device *pdev)
 	if (!pdata)
 		return -ENOMEM;
 
-	pdata->sck = of_get_named_gpio(np, "gpio-sck", 0);
-	pdata->miso = of_get_named_gpio(np, "gpio-miso", 0);
-	pdata->mosi = of_get_named_gpio(np, "gpio-mosi", 0);
+	ret = of_get_named_gpio(np, "gpio-sck", 0);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "gpio-sck property not found\n");
+		goto error_free;
+	}
+	pdata->sck = ret;
+
+	ret = of_get_named_gpio(np, "gpio-miso", 0);
+	if (ret < 0) {
+		dev_info(&pdev->dev, "gpio-miso property not found, switching to no-rx mode\n");
+		pdata->miso = SPI_GPIO_NO_MISO;
+	} else
+		pdata->miso = ret;
+
+	ret = of_get_named_gpio(np, "gpio-mosi", 0);
+	if (ret < 0) {
+		dev_info(&pdev->dev, "gpio-mosi property not found, switching to no-tx mode\n");
+		pdata->mosi = SPI_GPIO_NO_MOSI;
+	} else
+		pdata->mosi = ret;
 
 	ret = of_property_read_u32(np, "num-chipselects", &tmp);
 	if (ret < 0) {

drivers/spi/spi-imx.c

@@ -949,3 +949,4 @@ module_platform_driver(spi_imx_driver);
 MODULE_DESCRIPTION("SPI Master Controller driver");
 MODULE_AUTHOR("Sascha Hauer, Pengutronix");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);

drivers/spi/spi-mpc512x-psc.c

@@ -438,6 +438,7 @@ static int mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr,
 		master->num_chipselect = pdata->max_chipselect;
 	}
 
+	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
 	master->setup = mpc512x_psc_spi_setup;
 	master->transfer = mpc512x_psc_spi_transfer;
 	master->cleanup = mpc512x_psc_spi_cleanup;
@@ -522,17 +523,11 @@ static int mpc512x_psc_spi_of_probe(struct platform_device *op)
 	regaddr64 = of_translate_address(op->dev.of_node, regaddr_p);
 
 	/* get PSC id (0..11, used by port_config) */
-	if (op->dev.platform_data == NULL) {
-		const u32 *psc_nump;
-
-		psc_nump = of_get_property(op->dev.of_node, "cell-index", NULL);
-		if (!psc_nump || *psc_nump > 11) {
-			dev_err(&op->dev, "mpc512x_psc_spi: Device node %s "
-				"has invalid cell-index property\n",
-				op->dev.of_node->full_name);
-			return -EINVAL;
-		}
-		id = *psc_nump;
+	id = of_alias_get_id(op->dev.of_node, "spi");
+	if (id < 0) {
+		dev_err(&op->dev, "no alias id for %s\n",
+			op->dev.of_node->full_name);
+		return id;
 	}
 
 	return mpc512x_psc_spi_do_probe(&op->dev, (u32) regaddr64, (u32) size64,

drivers/spi/spi-mxs.c

@@ -241,6 +241,7 @@ static int mxs_spi_txrx_dma(struct mxs_spi *spi, int cs,
 	INIT_COMPLETION(spi->c);
 
 	ctrl0 = readl(ssp->base + HW_SSP_CTRL0);
+	ctrl0 &= ~BM_SSP_CTRL0_XFER_COUNT;
 	ctrl0 |= BM_SSP_CTRL0_DATA_XFER | mxs_spi_cs_to_reg(cs);
 
 	if (*first)
@@ -256,8 +257,10 @@ static int mxs_spi_txrx_dma(struct mxs_spi *spi, int cs,
 		if ((sg_count + 1 == sgs) && *last)
 			ctrl0 |= BM_SSP_CTRL0_IGNORE_CRC;
 
-		if (ssp->devid == IMX23_SSP)
+		if (ssp->devid == IMX23_SSP) {
+			ctrl0 &= ~BM_SSP_CTRL0_XFER_COUNT;
 			ctrl0 |= min;
+		}
 
 		dma_xfer[sg_count].pio[0] = ctrl0;
 		dma_xfer[sg_count].pio[3] = min;

drivers/spi/spi-omap-100k.c

@@ -481,7 +481,7 @@ static int omap1_spi100k_transfer(struct spi_device *spi, struct spi_message *m)
 	return 0;
 }
 
-static int __init omap1_spi100k_reset(struct omap1_spi100k *spi100k)
+static int omap1_spi100k_reset(struct omap1_spi100k *spi100k)
 {
 	return 0;
 }
@@ -560,7 +560,7 @@ err1:
 	return status;
 }
 
-static int __exit omap1_spi100k_remove(struct platform_device *pdev)
+static int omap1_spi100k_remove(struct platform_device *pdev)
 {
 	struct spi_master       *master;
 	struct omap1_spi100k    *spi100k;
@@ -604,7 +604,7 @@ static struct platform_driver omap1_spi100k_driver = {
 		.name		= "omap1_spi100k",
 		.owner		= THIS_MODULE,
 	},
-	.remove		= __exit_p(omap1_spi100k_remove),
+	.remove		= omap1_spi100k_remove,
 };
 
 

drivers/spi/spi-omap-uwire.c

@@ -476,7 +476,7 @@ static void uwire_off(struct uwire_spi *uwire)
 	spi_master_put(uwire->bitbang.master);
 }
 
-static int __init uwire_probe(struct platform_device *pdev)
+static int uwire_probe(struct platform_device *pdev)
 {
 	struct spi_master	*master;
 	struct uwire_spi	*uwire;
@@ -536,7 +536,7 @@ static int __init uwire_probe(struct platform_device *pdev)
 	return status;
 }
 
-static int __exit uwire_remove(struct platform_device *pdev)
+static int uwire_remove(struct platform_device *pdev)
 {
 	struct uwire_spi	*uwire = dev_get_drvdata(&pdev->dev);
 	int			status;
@@ -557,7 +557,7 @@ static struct platform_driver uwire_driver = {
 		.name		= "omap_uwire",
 		.owner		= THIS_MODULE,
 	},
-	.remove		= __exit_p(uwire_remove),
+	.remove		= uwire_remove,
 	// suspend ... unuse ck
 	// resume ... use ck
 };

drivers/spi/spi-omap2-mcspi.c

@@ -298,10 +298,10 @@ static void omap2_mcspi_rx_callback(void *data)
 	struct omap2_mcspi *mcspi = spi_master_get_devdata(spi->master);
 	struct omap2_mcspi_dma *mcspi_dma = &mcspi->dma_channels[spi->chip_select];
 
-	complete(&mcspi_dma->dma_rx_completion);
-
 	/* We must disable the DMA RX request */
 	omap2_mcspi_set_dma_req(spi, 1, 0);
+
+	complete(&mcspi_dma->dma_rx_completion);
 }
 
 static void omap2_mcspi_tx_callback(void *data)
@@ -310,10 +310,10 @@ static void omap2_mcspi_tx_callback(void *data)
 	struct omap2_mcspi *mcspi = spi_master_get_devdata(spi->master);
 	struct omap2_mcspi_dma *mcspi_dma = &mcspi->dma_channels[spi->chip_select];
 
-	complete(&mcspi_dma->dma_tx_completion);
-
 	/* We must disable the DMA TX request */
 	omap2_mcspi_set_dma_req(spi, 0, 0);
+
+	complete(&mcspi_dma->dma_tx_completion);
 }
 
 static void omap2_mcspi_tx_dma(struct spi_device *spi,
@@ -927,6 +927,7 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
 
 	struct spi_device		*spi;
 	struct spi_transfer		*t = NULL;
+	struct spi_master		*master;
 	int				cs_active = 0;
 	struct omap2_mcspi_cs		*cs;
 	struct omap2_mcspi_device_config *cd;
@@ -935,6 +936,7 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
 	u32				chconf;
 
 	spi = m->spi;
+	master = spi->master;
 	cs = spi->controller_state;
 	cd = spi->controller_data;
 
@@ -952,6 +954,14 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
 			if (!t->speed_hz && !t->bits_per_word)
 				par_override = 0;
 		}
+		if (cd && cd->cs_per_word) {
+			chconf = mcspi->ctx.modulctrl;
+			chconf &= ~OMAP2_MCSPI_MODULCTRL_SINGLE;
+			mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, chconf);
+			mcspi->ctx.modulctrl =
+				mcspi_read_cs_reg(spi, OMAP2_MCSPI_MODULCTRL);
+		}
+
 
 		if (!cs_active) {
 			omap2_mcspi_force_cs(spi, 1);
@@ -1013,6 +1023,14 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
 	if (cs_active)
 		omap2_mcspi_force_cs(spi, 0);
 
+	if (cd && cd->cs_per_word) {
+		chconf = mcspi->ctx.modulctrl;
+		chconf |= OMAP2_MCSPI_MODULCTRL_SINGLE;
+		mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, chconf);
+		mcspi->ctx.modulctrl =
+			mcspi_read_cs_reg(spi, OMAP2_MCSPI_MODULCTRL);
+	}
+
 	omap2_mcspi_set_enable(spi, 0);
 
 	m->status = status;
@@ -1020,7 +1038,7 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
 }
 
 static int omap2_mcspi_transfer_one_message(struct spi_master *master,
-						struct spi_message *m)
+		struct spi_message *m)
 {
 	struct omap2_mcspi	*mcspi;
 	struct spi_transfer	*t;
@@ -1041,7 +1059,7 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master,
 				|| (len && !(rx_buf || tx_buf))
 				|| (t->bits_per_word &&
 					(  t->bits_per_word < 4
-					|| t->bits_per_word > 32))) {
+					   || t->bits_per_word > 32))) {
 			dev_dbg(mcspi->dev, "transfer: %d Hz, %d %s%s, %d bpw\n",
 					t->speed_hz,
 					len,
@@ -1052,8 +1070,8 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master,
 		}
 		if (t->speed_hz && t->speed_hz < (OMAP2_MCSPI_MAX_FREQ >> 15)) {
 			dev_dbg(mcspi->dev, "speed_hz %d below minimum %d Hz\n",
-				t->speed_hz,
-				OMAP2_MCSPI_MAX_FREQ >> 15);
+					t->speed_hz,
+					OMAP2_MCSPI_MAX_FREQ >> 15);
 			return -EINVAL;
 		}
 
@@ -1099,7 +1117,7 @@ static int omap2_mcspi_master_setup(struct omap2_mcspi *mcspi)
 		return ret;
 
 	mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE,
-				OMAP2_MCSPI_WAKEUPENABLE_WKEN);
+			OMAP2_MCSPI_WAKEUPENABLE_WKEN);
 	ctx->wakeupenable = OMAP2_MCSPI_WAKEUPENABLE_WKEN;
 
 	omap2_mcspi_set_master_mode(master);
@@ -1228,7 +1246,7 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
 
 		sprintf(dma_ch_name, "rx%d", i);
 		dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA,
-							dma_ch_name);
+				dma_ch_name);
 		if (!dma_res) {
 			dev_dbg(&pdev->dev, "cannot get DMA RX channel\n");
 			status = -ENODEV;
@@ -1238,7 +1256,7 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
 		mcspi->dma_channels[i].dma_rx_sync_dev = dma_res->start;
 		sprintf(dma_ch_name, "tx%d", i);
 		dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA,
-							dma_ch_name);
+				dma_ch_name);
 		if (!dma_res) {
 			dev_dbg(&pdev->dev, "cannot get DMA TX channel\n");
 			status = -ENODEV;
@@ -1254,7 +1272,7 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
 	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
 	if (IS_ERR(pinctrl))
 		dev_warn(&pdev->dev,
-			"pins are not configured from the driver\n");
+				"pins are not configured from the driver\n");
 
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);

drivers/spi/spi-orion.c

@@ -366,7 +366,7 @@ msg_done:
 	return 0;
 }
 
-static int __init orion_spi_reset(struct orion_spi *orion_spi)
+static int orion_spi_reset(struct orion_spi *orion_spi)
 {
 	/* Verify that the CS is deasserted */
 	orion_spi_set_cs(orion_spi, 0);
@@ -396,7 +396,7 @@ static int orion_spi_setup(struct spi_device *spi)
 	return 0;
 }
 
-static int __init orion_spi_probe(struct platform_device *pdev)
+static int orion_spi_probe(struct platform_device *pdev)
 {
 	struct spi_master *master;
 	struct orion_spi *spi;
@@ -479,7 +479,7 @@ out:
 }
 
 
-static int __exit orion_spi_remove(struct platform_device *pdev)
+static int orion_spi_remove(struct platform_device *pdev)
 {
 	struct spi_master *master;
 	struct resource *r;
@@ -513,20 +513,11 @@ static struct platform_driver orion_spi_driver = {
 		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(orion_spi_of_match_table),
 	},
-	.remove		= __exit_p(orion_spi_remove),
+	.probe		= orion_spi_probe,
+	.remove		= orion_spi_remove,
 };
 
-static int __init orion_spi_init(void)
-{
-	return platform_driver_probe(&orion_spi_driver, orion_spi_probe);
-}
-module_init(orion_spi_init);
-
-static void __exit orion_spi_exit(void)
-{
-	platform_driver_unregister(&orion_spi_driver);
-}
-module_exit(orion_spi_exit);
+module_platform_driver(orion_spi_driver);
 
 MODULE_DESCRIPTION("Orion SPI driver");
 MODULE_AUTHOR("Shadi Ammouri <shadi@marvell.com>");

drivers/spi/spi-ppc4xx.c

@@ -389,7 +389,7 @@ static void free_gpios(struct ppc4xx_spi *hw)
 /*
  * platform_device layer stuff...
  */
-static int __init spi_ppc4xx_of_probe(struct platform_device *op)
+static int spi_ppc4xx_of_probe(struct platform_device *op)
 {
 	struct ppc4xx_spi *hw;
 	struct spi_master *master;
@@ -560,7 +560,7 @@ free_master:
 	return ret;
 }
 
-static int __exit spi_ppc4xx_of_remove(struct platform_device *op)
+static int spi_ppc4xx_of_remove(struct platform_device *op)
 {
 	struct spi_master *master = dev_get_drvdata(&op->dev);
 	struct ppc4xx_spi *hw = spi_master_get_devdata(master);
@@ -583,7 +583,7 @@ MODULE_DEVICE_TABLE(of, spi_ppc4xx_of_match);
 
 static struct platform_driver spi_ppc4xx_of_driver = {
 	.probe = spi_ppc4xx_of_probe,
-	.remove = __exit_p(spi_ppc4xx_of_remove),
+	.remove = spi_ppc4xx_of_remove,
 	.driver = {
 		.name = DRIVER_NAME,
 		.owner = THIS_MODULE,

drivers/spi/spi-pxa2xx-dma.c

@@ -0,0 +1,392 @@
+/*
+ * PXA2xx SPI DMA engine support.
+ *
+ * Copyright (C) 2013, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/pxa2xx_ssp.h>
+#include <linux/scatterlist.h>
+#include <linux/sizes.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
+
+#include "spi-pxa2xx.h"
+
+static int pxa2xx_spi_map_dma_buffer(struct driver_data *drv_data,
+				     enum dma_data_direction dir)
+{
+	int i, nents, len = drv_data->len;
+	struct scatterlist *sg;
+	struct device *dmadev;
+	struct sg_table *sgt;
+	void *buf, *pbuf;
+
+	/*
+	 * Some DMA controllers have problems transferring buffers that are
+	 * not multiple of 4 bytes. So we truncate the transfer so that it
+	 * is suitable for such controllers, and handle the trailing bytes
+	 * manually after the DMA completes.
+	 *
+	 * REVISIT: It would be better if this information could be
+	 * retrieved directly from the DMA device in a similar way than
+	 * ->copy_align etc. is done.
+	 */
+	len = ALIGN(drv_data->len, 4);
+
+	if (dir == DMA_TO_DEVICE) {
+		dmadev = drv_data->tx_chan->device->dev;
+		sgt = &drv_data->tx_sgt;
+		buf = drv_data->tx;
+		drv_data->tx_map_len = len;
+	} else {
+		dmadev = drv_data->rx_chan->device->dev;
+		sgt = &drv_data->rx_sgt;
+		buf = drv_data->rx;
+		drv_data->rx_map_len = len;
+	}
+
+	nents = DIV_ROUND_UP(len, SZ_2K);
+	if (nents != sgt->nents) {
+		int ret;
+
+		sg_free_table(sgt);
+		ret = sg_alloc_table(sgt, nents, GFP_KERNEL);
+		if (ret)
+			return ret;
+	}
+
+	pbuf = buf;
+	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+		size_t bytes = min_t(size_t, len, SZ_2K);
+
+		if (buf)
+			sg_set_buf(sg, pbuf, bytes);
+		else
+			sg_set_buf(sg, drv_data->dummy, bytes);
+
+		pbuf += bytes;
+		len -= bytes;
+	}
+
+	nents = dma_map_sg(dmadev, sgt->sgl, sgt->nents, dir);
+	if (!nents)
+		return -ENOMEM;
+
+	return nents;
+}
+
+static void pxa2xx_spi_unmap_dma_buffer(struct driver_data *drv_data,
+					enum dma_data_direction dir)
+{
+	struct device *dmadev;
+	struct sg_table *sgt;
+
+	if (dir == DMA_TO_DEVICE) {
+		dmadev = drv_data->tx_chan->device->dev;
+		sgt = &drv_data->tx_sgt;
+	} else {
+		dmadev = drv_data->rx_chan->device->dev;
+		sgt = &drv_data->rx_sgt;
+	}
+
+	dma_unmap_sg(dmadev, sgt->sgl, sgt->nents, dir);
+}
+
+static void pxa2xx_spi_unmap_dma_buffers(struct driver_data *drv_data)
+{
+	if (!drv_data->dma_mapped)
+		return;
+
+	pxa2xx_spi_unmap_dma_buffer(drv_data, DMA_FROM_DEVICE);
+	pxa2xx_spi_unmap_dma_buffer(drv_data, DMA_TO_DEVICE);
+
+	drv_data->dma_mapped = 0;
+}
+
+static void pxa2xx_spi_dma_transfer_complete(struct driver_data *drv_data,
+					     bool error)
+{
+	struct spi_message *msg = drv_data->cur_msg;
+
+	/*
+	 * It is possible that one CPU is handling ROR interrupt and other
+	 * just gets DMA completion. Calling pump_transfers() twice for the
+	 * same transfer leads to problems thus we prevent concurrent calls
+	 * by using ->dma_running.
+	 */
+	if (atomic_dec_and_test(&drv_data->dma_running)) {
+		void __iomem *reg = drv_data->ioaddr;
+
+		/*
+		 * If the other CPU is still handling the ROR interrupt we
+		 * might not know about the error yet. So we re-check the
+		 * ROR bit here before we clear the status register.
+		 */
+		if (!error) {
+			u32 status = read_SSSR(reg) & drv_data->mask_sr;
+			error = status & SSSR_ROR;
+		}
+
+		/* Clear status & disable interrupts */
+		write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+		write_SSSR_CS(drv_data, drv_data->clear_sr);
+		if (!pxa25x_ssp_comp(drv_data))
+			write_SSTO(0, reg);
+
+		if (!error) {
+			pxa2xx_spi_unmap_dma_buffers(drv_data);
+
+			/* Handle the last bytes of unaligned transfer */
+			drv_data->tx += drv_data->tx_map_len;
+			drv_data->write(drv_data);
+
+			drv_data->rx += drv_data->rx_map_len;
+			drv_data->read(drv_data);
+
+			msg->actual_length += drv_data->len;
+			msg->state = pxa2xx_spi_next_transfer(drv_data);
+		} else {
+			/* In case we got an error we disable the SSP now */
+			write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
+
+			msg->state = ERROR_STATE;
+		}
+
+		tasklet_schedule(&drv_data->pump_transfers);
+	}
+}
+
+static void pxa2xx_spi_dma_callback(void *data)
+{
+	pxa2xx_spi_dma_transfer_complete(data, false);
+}
+
+static struct dma_async_tx_descriptor *
+pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data,
+			   enum dma_transfer_direction dir)
+{
+	struct pxa2xx_spi_master *pdata = drv_data->master_info;
+	struct chip_data *chip = drv_data->cur_chip;
+	enum dma_slave_buswidth width;
+	struct dma_slave_config cfg;
+	struct dma_chan *chan;
+	struct sg_table *sgt;
+	int nents, ret;
+
+	switch (drv_data->n_bytes) {
+	case 1:
+		width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+		break;
+	case 2:
+		width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+		break;
+	default:
+		width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+		break;
+	}
+
+	memset(&cfg, 0, sizeof(cfg));
+	cfg.direction = dir;
+
+	if (dir == DMA_MEM_TO_DEV) {
+		cfg.dst_addr = drv_data->ssdr_physical;
+		cfg.dst_addr_width = width;
+		cfg.dst_maxburst = chip->dma_burst_size;
+		cfg.slave_id = pdata->tx_slave_id;
+
+		sgt = &drv_data->tx_sgt;
+		nents = drv_data->tx_nents;
+		chan = drv_data->tx_chan;
+	} else {
+		cfg.src_addr = drv_data->ssdr_physical;
+		cfg.src_addr_width = width;
+		cfg.src_maxburst = chip->dma_burst_size;
+		cfg.slave_id = pdata->rx_slave_id;
+
+		sgt = &drv_data->rx_sgt;
+		nents = drv_data->rx_nents;
+		chan = drv_data->rx_chan;
+	}
+
+	ret = dmaengine_slave_config(chan, &cfg);
+	if (ret) {
+		dev_warn(&drv_data->pdev->dev, "DMA slave config failed\n");
+		return NULL;
+	}
+
+	return dmaengine_prep_slave_sg(chan, sgt->sgl, nents, dir,
+				       DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+}
+
+static bool pxa2xx_spi_dma_filter(struct dma_chan *chan, void *param)
+{
+	const struct pxa2xx_spi_master *pdata = param;
+
+	return chan->chan_id == pdata->tx_chan_id ||
+	       chan->chan_id == pdata->rx_chan_id;
+}
+
+bool pxa2xx_spi_dma_is_possible(size_t len)
+{
+	return len <= MAX_DMA_LEN;
+}
+
+int pxa2xx_spi_map_dma_buffers(struct driver_data *drv_data)
+{
+	const struct chip_data *chip = drv_data->cur_chip;
+	int ret;
+
+	if (!chip->enable_dma)
+		return 0;
+
+	/* Don't bother with DMA if we can't do even a single burst */
+	if (drv_data->len < chip->dma_burst_size)
+		return 0;
+
+	ret = pxa2xx_spi_map_dma_buffer(drv_data, DMA_TO_DEVICE);
+	if (ret <= 0) {
+		dev_warn(&drv_data->pdev->dev, "failed to DMA map TX\n");
+		return 0;
+	}
+
+	drv_data->tx_nents = ret;
+
+	ret = pxa2xx_spi_map_dma_buffer(drv_data, DMA_FROM_DEVICE);
+	if (ret <= 0) {
+		pxa2xx_spi_unmap_dma_buffer(drv_data, DMA_TO_DEVICE);
+		dev_warn(&drv_data->pdev->dev, "failed to DMA map RX\n");
+		return 0;
+	}
+
+	drv_data->rx_nents = ret;
+	return 1;
+}
+
+irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data)
+{
+	u32 status;
+
+	status = read_SSSR(drv_data->ioaddr) & drv_data->mask_sr;
+	if (status & SSSR_ROR) {
+		dev_err(&drv_data->pdev->dev, "FIFO overrun\n");
+
+		dmaengine_terminate_all(drv_data->rx_chan);
+		dmaengine_terminate_all(drv_data->tx_chan);
+
+		pxa2xx_spi_dma_transfer_complete(drv_data, true);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, u32 dma_burst)
+{
+	struct dma_async_tx_descriptor *tx_desc, *rx_desc;
+
+	tx_desc = pxa2xx_spi_dma_prepare_one(drv_data, DMA_MEM_TO_DEV);
+	if (!tx_desc) {
+		dev_err(&drv_data->pdev->dev,
+			"failed to get DMA TX descriptor\n");
+		return -EBUSY;
+	}
+
+	rx_desc = pxa2xx_spi_dma_prepare_one(drv_data, DMA_DEV_TO_MEM);
+	if (!rx_desc) {
+		dev_err(&drv_data->pdev->dev,
+			"failed to get DMA RX descriptor\n");
+		return -EBUSY;
+	}
+
+	/* We are ready when RX completes */
+	rx_desc->callback = pxa2xx_spi_dma_callback;
+	rx_desc->callback_param = drv_data;
+
+	dmaengine_submit(rx_desc);
+	dmaengine_submit(tx_desc);
+	return 0;
+}
+
+void pxa2xx_spi_dma_start(struct driver_data *drv_data)
+{
+	dma_async_issue_pending(drv_data->rx_chan);
+	dma_async_issue_pending(drv_data->tx_chan);
+
+	atomic_set(&drv_data->dma_running, 1);
+}
+
+int pxa2xx_spi_dma_setup(struct driver_data *drv_data)
+{
+	struct pxa2xx_spi_master *pdata = drv_data->master_info;
+	dma_cap_mask_t mask;
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+
+	drv_data->dummy = devm_kzalloc(&drv_data->pdev->dev, SZ_2K, GFP_KERNEL);
+	if (!drv_data->dummy)
+		return -ENOMEM;
+
+	drv_data->tx_chan = dma_request_channel(mask, pxa2xx_spi_dma_filter,
+						pdata);
+	if (!drv_data->tx_chan)
+		return -ENODEV;
+
+	drv_data->rx_chan = dma_request_channel(mask, pxa2xx_spi_dma_filter,
+						pdata);
+	if (!drv_data->rx_chan) {
+		dma_release_channel(drv_data->tx_chan);
+		drv_data->tx_chan = NULL;
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+void pxa2xx_spi_dma_release(struct driver_data *drv_data)
+{
+	if (drv_data->rx_chan) {
+		dmaengine_terminate_all(drv_data->rx_chan);
+		dma_release_channel(drv_data->rx_chan);
+		sg_free_table(&drv_data->rx_sgt);
+		drv_data->rx_chan = NULL;
+	}
+	if (drv_data->tx_chan) {
+		dmaengine_terminate_all(drv_data->tx_chan);
+		dma_release_channel(drv_data->tx_chan);
+		sg_free_table(&drv_data->tx_sgt);
+		drv_data->tx_chan = NULL;
+	}
+}
+
+void pxa2xx_spi_dma_resume(struct driver_data *drv_data)
+{
+}
+
+int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
+					   struct spi_device *spi,
+					   u8 bits_per_word, u32 *burst_code,
+					   u32 *threshold)
+{
+	struct pxa2xx_spi_chip *chip_info = spi->controller_data;
+
+	/*
+	 * If the DMA burst size is given in chip_info we use that,
+	 * otherwise we use the default. Also we use the default FIFO
+	 * thresholds for now.
+	 */
+	*burst_code = chip_info ? chip_info->dma_burst_size : 16;
+	*threshold = SSCR1_RxTresh(RX_THRESH_DFLT)
+		   | SSCR1_TxTresh(TX_THRESH_DFLT);
+
+	return 0;
+}

drivers/spi/spi-pxa2xx-pci.c

@@ -8,147 +8,58 @@
 #include <linux/module.h>
 #include <linux/spi/pxa2xx_spi.h>
 
-struct ce4100_info {
-	struct ssp_device ssp;
-	struct platform_device *spi_pdev;
-};
-
-static DEFINE_MUTEX(ssp_lock);
-static LIST_HEAD(ssp_list);
-
-struct ssp_device *pxa_ssp_request(int port, const char *label)
-{
-	struct ssp_device *ssp = NULL;
-
-	mutex_lock(&ssp_lock);
-
-	list_for_each_entry(ssp, &ssp_list, node) {
-		if (ssp->port_id == port && ssp->use_count == 0) {
-			ssp->use_count++;
-			ssp->label = label;
-			break;
-		}
-	}
-
-	mutex_unlock(&ssp_lock);
-
-	if (&ssp->node == &ssp_list)
-		return NULL;
-
-	return ssp;
-}
-EXPORT_SYMBOL_GPL(pxa_ssp_request);
-
-void pxa_ssp_free(struct ssp_device *ssp)
-{
-	mutex_lock(&ssp_lock);
-	if (ssp->use_count) {
-		ssp->use_count--;
-		ssp->label = NULL;
-	} else
-		dev_err(&ssp->pdev->dev, "device already free\n");
-	mutex_unlock(&ssp_lock);
-}
-EXPORT_SYMBOL_GPL(pxa_ssp_free);
-
 static int ce4100_spi_probe(struct pci_dev *dev,
 		const struct pci_device_id *ent)
 {
+	struct platform_device_info pi;
 	int ret;
-	resource_size_t phys_beg;
-	resource_size_t phys_len;
-	struct ce4100_info *spi_info;
 	struct platform_device *pdev;
 	struct pxa2xx_spi_master spi_pdata;
 	struct ssp_device *ssp;
 
-	ret = pci_enable_device(dev);
+	ret = pcim_enable_device(dev);
 	if (ret)
 		return ret;
 
-	phys_beg = pci_resource_start(dev, 0);
-	phys_len = pci_resource_len(dev, 0);
-
-	if (!request_mem_region(phys_beg, phys_len,
-				"CE4100 SPI")) {
-		dev_err(&dev->dev, "Can't request register space.\n");
-		ret = -EBUSY;
+	ret = pcim_iomap_regions(dev, 1 << 0, "PXA2xx SPI");
+	if (!ret)
 		return ret;
-	}
 
-	pdev = platform_device_alloc("pxa2xx-spi", dev->devfn);
-	spi_info = kzalloc(sizeof(*spi_info), GFP_KERNEL);
-	if (!pdev || !spi_info ) {
-		ret = -ENOMEM;
-		goto err_nomem;
-	}
 	memset(&spi_pdata, 0, sizeof(spi_pdata));
 	spi_pdata.num_chipselect = dev->devfn;
 
-	ret = platform_device_add_data(pdev, &spi_pdata, sizeof(spi_pdata));
-	if (ret)
-		goto err_nomem;
-
-	pdev->dev.parent = &dev->dev;
-	pdev->dev.of_node = dev->dev.of_node;
-	ssp = &spi_info->ssp;
+	ssp = &spi_pdata.ssp;
 	ssp->phys_base = pci_resource_start(dev, 0);
-	ssp->mmio_base = ioremap(phys_beg, phys_len);
+	ssp->mmio_base = pcim_iomap_table(dev)[0];
 	if (!ssp->mmio_base) {
-		dev_err(&pdev->dev, "failed to ioremap() registers\n");
-		ret = -EIO;
-		goto err_nomem;
+		dev_err(&dev->dev, "failed to ioremap() registers\n");
+		return -EIO;
 	}
 	ssp->irq = dev->irq;
-	ssp->port_id = pdev->id;
+	ssp->port_id = dev->devfn;
 	ssp->type = PXA25x_SSP;
 
-	mutex_lock(&ssp_lock);
-	list_add(&ssp->node, &ssp_list);
-	mutex_unlock(&ssp_lock);
+	memset(&pi, 0, sizeof(pi));
+	pi.parent = &dev->dev;
+	pi.name = "pxa2xx-spi";
+	pi.id = ssp->port_id;
+	pi.data = &spi_pdata;
+	pi.size_data = sizeof(spi_pdata);
 
-	pci_set_drvdata(dev, spi_info);
+	pdev = platform_device_register_full(&pi);
+	if (!pdev)
+		return -ENOMEM;
 
-	ret = platform_device_add(pdev);
-	if (ret)
-		goto err_dev_add;
+	pci_set_drvdata(dev, pdev);
 
-	return ret;
-
-err_dev_add:
-	pci_set_drvdata(dev, NULL);
-	mutex_lock(&ssp_lock);
-	list_del(&ssp->node);
-	mutex_unlock(&ssp_lock);
-	iounmap(ssp->mmio_base);
-
-err_nomem:
-	release_mem_region(phys_beg, phys_len);
-	platform_device_put(pdev);
-	kfree(spi_info);
-	return ret;
+	return 0;
 }
 
 static void ce4100_spi_remove(struct pci_dev *dev)
 {
-	struct ce4100_info *spi_info;
-	struct ssp_device *ssp;
-
-	spi_info = pci_get_drvdata(dev);
-	ssp = &spi_info->ssp;
-	platform_device_unregister(spi_info->spi_pdev);
-
-	iounmap(ssp->mmio_base);
-	release_mem_region(pci_resource_start(dev, 0),
-			pci_resource_len(dev, 0));
-
-	mutex_lock(&ssp_lock);
-	list_del(&ssp->node);
-	mutex_unlock(&ssp_lock);
+	struct platform_device *pdev = pci_get_drvdata(dev);
 
-	pci_set_drvdata(dev, NULL);
-	pci_disable_device(dev);
-	kfree(spi_info);
+	platform_device_unregister(pdev);
 }
 
 static DEFINE_PCI_DEVICE_TABLE(ce4100_spi_devices) = {

drivers/spi/spi-pxa2xx-pxadma.c

@@ -0,0 +1,490 @@
+/*
+ * PXA2xx SPI private DMA support.
+ *
+ * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/pxa2xx_ssp.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
+
+#include "spi-pxa2xx.h"
+
+#define DMA_INT_MASK		(DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
+#define RESET_DMA_CHANNEL	(DCSR_NODESC | DMA_INT_MASK)
+
+bool pxa2xx_spi_dma_is_possible(size_t len)
+{
+	/* Try to map dma buffer and do a dma transfer if successful, but
+	 * only if the length is non-zero and less than MAX_DMA_LEN.
+	 *
+	 * Zero-length non-descriptor DMA is illegal on PXA2xx; force use
+	 * of PIO instead.  Care is needed above because the transfer may
+	 * have have been passed with buffers that are already dma mapped.
+	 * A zero-length transfer in PIO mode will not try to write/read
+	 * to/from the buffers
+	 *
+	 * REVISIT large transfers are exactly where we most want to be
+	 * using DMA.  If this happens much, split those transfers into
+	 * multiple DMA segments rather than forcing PIO.
+	 */
+	return len > 0 && len <= MAX_DMA_LEN;
+}
+
+int pxa2xx_spi_map_dma_buffers(struct driver_data *drv_data)
+{
+	struct spi_message *msg = drv_data->cur_msg;
+	struct device *dev = &msg->spi->dev;
+
+	if (!drv_data->cur_chip->enable_dma)
+		return 0;
+
+	if (msg->is_dma_mapped)
+		return  drv_data->rx_dma && drv_data->tx_dma;
+
+	if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx))
+		return 0;
+
+	/* Modify setup if rx buffer is null */
+	if (drv_data->rx == NULL) {
+		*drv_data->null_dma_buf = 0;
+		drv_data->rx = drv_data->null_dma_buf;
+		drv_data->rx_map_len = 4;
+	} else
+		drv_data->rx_map_len = drv_data->len;
+
+
+	/* Modify setup if tx buffer is null */
+	if (drv_data->tx == NULL) {
+		*drv_data->null_dma_buf = 0;
+		drv_data->tx = drv_data->null_dma_buf;
+		drv_data->tx_map_len = 4;
+	} else
+		drv_data->tx_map_len = drv_data->len;
+
+	/* Stream map the tx buffer. Always do DMA_TO_DEVICE first
+	 * so we flush the cache *before* invalidating it, in case
+	 * the tx and rx buffers overlap.
+	 */
+	drv_data->tx_dma = dma_map_single(dev, drv_data->tx,
+					drv_data->tx_map_len, DMA_TO_DEVICE);
+	if (dma_mapping_error(dev, drv_data->tx_dma))
+		return 0;
+
+	/* Stream map the rx buffer */
+	drv_data->rx_dma = dma_map_single(dev, drv_data->rx,
+					drv_data->rx_map_len, DMA_FROM_DEVICE);
+	if (dma_mapping_error(dev, drv_data->rx_dma)) {
+		dma_unmap_single(dev, drv_data->tx_dma,
+					drv_data->tx_map_len, DMA_TO_DEVICE);
+		return 0;
+	}
+
+	return 1;
+}
+
+static void pxa2xx_spi_unmap_dma_buffers(struct driver_data *drv_data)
+{
+	struct device *dev;
+
+	if (!drv_data->dma_mapped)
+		return;
+
+	if (!drv_data->cur_msg->is_dma_mapped) {
+		dev = &drv_data->cur_msg->spi->dev;
+		dma_unmap_single(dev, drv_data->rx_dma,
+					drv_data->rx_map_len, DMA_FROM_DEVICE);
+		dma_unmap_single(dev, drv_data->tx_dma,
+					drv_data->tx_map_len, DMA_TO_DEVICE);
+	}
+
+	drv_data->dma_mapped = 0;
+}
+
+static int wait_ssp_rx_stall(void const __iomem *ioaddr)
+{
+	unsigned long limit = loops_per_jiffy << 1;
+
+	while ((read_SSSR(ioaddr) & SSSR_BSY) && --limit)
+		cpu_relax();
+
+	return limit;
+}
+
+static int wait_dma_channel_stop(int channel)
+{
+	unsigned long limit = loops_per_jiffy << 1;
+
+	while (!(DCSR(channel) & DCSR_STOPSTATE) && --limit)
+		cpu_relax();
+
+	return limit;
+}
+
+static void pxa2xx_spi_dma_error_stop(struct driver_data *drv_data,
+				      const char *msg)
+{
+	void __iomem *reg = drv_data->ioaddr;
+
+	/* Stop and reset */
+	DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+	DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+	write_SSSR_CS(drv_data, drv_data->clear_sr);
+	write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+	if (!pxa25x_ssp_comp(drv_data))
+		write_SSTO(0, reg);
+	pxa2xx_spi_flush(drv_data);
+	write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
+
+	pxa2xx_spi_unmap_dma_buffers(drv_data);
+
+	dev_err(&drv_data->pdev->dev, "%s\n", msg);
+
+	drv_data->cur_msg->state = ERROR_STATE;
+	tasklet_schedule(&drv_data->pump_transfers);
+}
+
+static void pxa2xx_spi_dma_transfer_complete(struct driver_data *drv_data)
+{
+	void __iomem *reg = drv_data->ioaddr;
+	struct spi_message *msg = drv_data->cur_msg;
+
+	/* Clear and disable interrupts on SSP and DMA channels*/
+	write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+	write_SSSR_CS(drv_data, drv_data->clear_sr);
+	DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+	DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+
+	if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
+		dev_err(&drv_data->pdev->dev,
+			"dma_handler: dma rx channel stop failed\n");
+
+	if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
+		dev_err(&drv_data->pdev->dev,
+			"dma_transfer: ssp rx stall failed\n");
+
+	pxa2xx_spi_unmap_dma_buffers(drv_data);
+
+	/* update the buffer pointer for the amount completed in dma */
+	drv_data->rx += drv_data->len -
+			(DCMD(drv_data->rx_channel) & DCMD_LENGTH);
+
+	/* read trailing data from fifo, it does not matter how many
+	 * bytes are in the fifo just read until buffer is full
+	 * or fifo is empty, which ever occurs first */
+	drv_data->read(drv_data);
+
+	/* return count of what was actually read */
+	msg->actual_length += drv_data->len -
+				(drv_data->rx_end - drv_data->rx);
+
+	/* Transfer delays and chip select release are
+	 * handled in pump_transfers or giveback
+	 */
+
+	/* Move to next transfer */
+	msg->state = pxa2xx_spi_next_transfer(drv_data);
+
+	/* Schedule transfer tasklet */
+	tasklet_schedule(&drv_data->pump_transfers);
+}
+
+void pxa2xx_spi_dma_handler(int channel, void *data)
+{
+	struct driver_data *drv_data = data;
+	u32 irq_status = DCSR(channel) & DMA_INT_MASK;
+
+	if (irq_status & DCSR_BUSERR) {
+
+		if (channel == drv_data->tx_channel)
+			pxa2xx_spi_dma_error_stop(drv_data,
+				"dma_handler: bad bus address on tx channel");
+		else
+			pxa2xx_spi_dma_error_stop(drv_data,
+				"dma_handler: bad bus address on rx channel");
+		return;
+	}
+
+	/* PXA255x_SSP has no timeout interrupt, wait for tailing bytes */
+	if ((channel == drv_data->tx_channel)
+		&& (irq_status & DCSR_ENDINTR)
+		&& (drv_data->ssp_type == PXA25x_SSP)) {
+
+		/* Wait for rx to stall */
+		if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
+			dev_err(&drv_data->pdev->dev,
+				"dma_handler: ssp rx stall failed\n");
+
+		/* finish this transfer, start the next */
+		pxa2xx_spi_dma_transfer_complete(drv_data);
+	}
+}
+
+irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data)
+{
+	u32 irq_status;
+	void __iomem *reg = drv_data->ioaddr;
+
+	irq_status = read_SSSR(reg) & drv_data->mask_sr;
+	if (irq_status & SSSR_ROR) {
+		pxa2xx_spi_dma_error_stop(drv_data,
+					  "dma_transfer: fifo overrun");
+		return IRQ_HANDLED;
+	}
+
+	/* Check for false positive timeout */
+	if ((irq_status & SSSR_TINT)
+		&& (DCSR(drv_data->tx_channel) & DCSR_RUN)) {
+		write_SSSR(SSSR_TINT, reg);
+		return IRQ_HANDLED;
+	}
+
+	if (irq_status & SSSR_TINT || drv_data->rx == drv_data->rx_end) {
+
+		/* Clear and disable timeout interrupt, do the rest in
+		 * dma_transfer_complete */
+		if (!pxa25x_ssp_comp(drv_data))
+			write_SSTO(0, reg);
+
+		/* finish this transfer, start the next */
+		pxa2xx_spi_dma_transfer_complete(drv_data);
+
+		return IRQ_HANDLED;
+	}
+
+	/* Opps problem detected */
+	return IRQ_NONE;
+}
+
+int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, u32 dma_burst)
+{
+	u32 dma_width;
+
+	switch (drv_data->n_bytes) {
+	case 1:
+		dma_width = DCMD_WIDTH1;
+		break;
+	case 2:
+		dma_width = DCMD_WIDTH2;
+		break;
+	default:
+		dma_width = DCMD_WIDTH4;
+		break;
+	}
+
+	/* Setup rx DMA Channel */
+	DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+	DSADR(drv_data->rx_channel) = drv_data->ssdr_physical;
+	DTADR(drv_data->rx_channel) = drv_data->rx_dma;
+	if (drv_data->rx == drv_data->null_dma_buf)
+		/* No target address increment */
+		DCMD(drv_data->rx_channel) = DCMD_FLOWSRC
+						| dma_width
+						| dma_burst
+						| drv_data->len;
+	else
+		DCMD(drv_data->rx_channel) = DCMD_INCTRGADDR
+						| DCMD_FLOWSRC
+						| dma_width
+						| dma_burst
+						| drv_data->len;
+
+	/* Setup tx DMA Channel */
+	DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+	DSADR(drv_data->tx_channel) = drv_data->tx_dma;
+	DTADR(drv_data->tx_channel) = drv_data->ssdr_physical;
+	if (drv_data->tx == drv_data->null_dma_buf)
+		/* No source address increment */
+		DCMD(drv_data->tx_channel) = DCMD_FLOWTRG
+						| dma_width
+						| dma_burst
+						| drv_data->len;
+	else
+		DCMD(drv_data->tx_channel) = DCMD_INCSRCADDR
+						| DCMD_FLOWTRG
+						| dma_width
+						| dma_burst
+						| drv_data->len;
+
+	/* Enable dma end irqs on SSP to detect end of transfer */
+	if (drv_data->ssp_type == PXA25x_SSP)
+		DCMD(drv_data->tx_channel) |= DCMD_ENDIRQEN;
+
+	return 0;
+}
+
+void pxa2xx_spi_dma_start(struct driver_data *drv_data)
+{
+	DCSR(drv_data->rx_channel) |= DCSR_RUN;
+	DCSR(drv_data->tx_channel) |= DCSR_RUN;
+}
+
+int pxa2xx_spi_dma_setup(struct driver_data *drv_data)
+{
+	struct device *dev = &drv_data->pdev->dev;
+	struct ssp_device *ssp = drv_data->ssp;
+
+	/* Get two DMA channels	(rx and tx) */
+	drv_data->rx_channel = pxa_request_dma("pxa2xx_spi_ssp_rx",
+						DMA_PRIO_HIGH,
+						pxa2xx_spi_dma_handler,
+						drv_data);
+	if (drv_data->rx_channel < 0) {
+		dev_err(dev, "problem (%d) requesting rx channel\n",
+			drv_data->rx_channel);
+		return -ENODEV;
+	}
+	drv_data->tx_channel = pxa_request_dma("pxa2xx_spi_ssp_tx",
+						DMA_PRIO_MEDIUM,
+						pxa2xx_spi_dma_handler,
+						drv_data);
+	if (drv_data->tx_channel < 0) {
+		dev_err(dev, "problem (%d) requesting tx channel\n",
+			drv_data->tx_channel);
+		pxa_free_dma(drv_data->rx_channel);
+		return -ENODEV;
+	}
+
+	DRCMR(ssp->drcmr_rx) = DRCMR_MAPVLD | drv_data->rx_channel;
+	DRCMR(ssp->drcmr_tx) = DRCMR_MAPVLD | drv_data->tx_channel;
+
+	return 0;
+}
+
+void pxa2xx_spi_dma_release(struct driver_data *drv_data)
+{
+	struct ssp_device *ssp = drv_data->ssp;
+
+	DRCMR(ssp->drcmr_rx) = 0;
+	DRCMR(ssp->drcmr_tx) = 0;
+
+	if (drv_data->tx_channel != 0)
+		pxa_free_dma(drv_data->tx_channel);
+	if (drv_data->rx_channel != 0)
+		pxa_free_dma(drv_data->rx_channel);
+}
+
+void pxa2xx_spi_dma_resume(struct driver_data *drv_data)
+{
+	if (drv_data->rx_channel != -1)
+		DRCMR(drv_data->ssp->drcmr_rx) =
+			DRCMR_MAPVLD | drv_data->rx_channel;
+	if (drv_data->tx_channel != -1)
+		DRCMR(drv_data->ssp->drcmr_tx) =
+			DRCMR_MAPVLD | drv_data->tx_channel;
+}
+
+int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
+					   struct spi_device *spi,
+					   u8 bits_per_word, u32 *burst_code,
+					   u32 *threshold)
+{
+	struct pxa2xx_spi_chip *chip_info =
+			(struct pxa2xx_spi_chip *)spi->controller_data;
+	int bytes_per_word;
+	int burst_bytes;
+	int thresh_words;
+	int req_burst_size;
+	int retval = 0;
+
+	/* Set the threshold (in registers) to equal the same amount of data
+	 * as represented by burst size (in bytes).  The computation below
+	 * is (burst_size rounded up to nearest 8 byte, word or long word)
+	 * divided by (bytes/register); the tx threshold is the inverse of
+	 * the rx, so that there will always be enough data in the rx fifo
+	 * to satisfy a burst, and there will always be enough space in the
+	 * tx fifo to accept a burst (a tx burst will overwrite the fifo if
+	 * there is not enough space), there must always remain enough empty
+	 * space in the rx fifo for any data loaded to the tx fifo.
+	 * Whenever burst_size (in bytes) equals bits/word, the fifo threshold
+	 * will be 8, or half the fifo;
+	 * The threshold can only be set to 2, 4 or 8, but not 16, because
+	 * to burst 16 to the tx fifo, the fifo would have to be empty;
+	 * however, the minimum fifo trigger level is 1, and the tx will
+	 * request service when the fifo is at this level, with only 15 spaces.
+	 */
+
+	/* find bytes/word */
+	if (bits_per_word <= 8)
+		bytes_per_word = 1;
+	else if (bits_per_word <= 16)
+		bytes_per_word = 2;
+	else
+		bytes_per_word = 4;
+
+	/* use struct pxa2xx_spi_chip->dma_burst_size if available */
+	if (chip_info)
+		req_burst_size = chip_info->dma_burst_size;
+	else {
+		switch (chip->dma_burst_size) {
+		default:
+			/* if the default burst size is not set,
+			 * do it now */
+			chip->dma_burst_size = DCMD_BURST8;
+		case DCMD_BURST8:
+			req_burst_size = 8;
+			break;
+		case DCMD_BURST16:
+			req_burst_size = 16;
+			break;
+		case DCMD_BURST32:
+			req_burst_size = 32;
+			break;
+		}
+	}
+	if (req_burst_size <= 8) {
+		*burst_code = DCMD_BURST8;
+		burst_bytes = 8;
+	} else if (req_burst_size <= 16) {
+		if (bytes_per_word == 1) {
+			/* don't burst more than 1/2 the fifo */
+			*burst_code = DCMD_BURST8;
+			burst_bytes = 8;
+			retval = 1;
+		} else {
+			*burst_code = DCMD_BURST16;
+			burst_bytes = 16;
+		}
+	} else {
+		if (bytes_per_word == 1) {
+			/* don't burst more than 1/2 the fifo */
+			*burst_code = DCMD_BURST8;
+			burst_bytes = 8;
+			retval = 1;
+		} else if (bytes_per_word == 2) {
+			/* don't burst more than 1/2 the fifo */
+			*burst_code = DCMD_BURST16;
+			burst_bytes = 16;
+			retval = 1;
+		} else {
+			*burst_code = DCMD_BURST32;
+			burst_bytes = 32;
+		}
+	}
+
+	thresh_words = burst_bytes / bytes_per_word;
+
+	/* thresh_words will be between 2 and 8 */
+	*threshold = (SSCR1_RxTresh(thresh_words) & SSCR1_RFT)
+			| (SSCR1_TxTresh(16-thresh_words) & SSCR1_TFT);
+
+	return retval;
+}

drivers/spi/spi-pxa2xx.h

@@ -0,0 +1,221 @@
+/*
+ * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
+ * Copyright (C) 2013, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef SPI_PXA2XX_H
+#define SPI_PXA2XX_H
+
+#include <linux/atomic.h>
+#include <linux/dmaengine.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/pxa2xx_ssp.h>
+#include <linux/scatterlist.h>
+#include <linux/sizes.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
+
+struct driver_data {
+	/* Driver model hookup */
+	struct platform_device *pdev;
+
+	/* SSP Info */
+	struct ssp_device *ssp;
+
+	/* SPI framework hookup */
+	enum pxa_ssp_type ssp_type;
+	struct spi_master *master;
+
+	/* PXA hookup */
+	struct pxa2xx_spi_master *master_info;
+
+	/* PXA private DMA setup stuff */
+	int rx_channel;
+	int tx_channel;
+	u32 *null_dma_buf;
+
+	/* SSP register addresses */
+	void __iomem *ioaddr;
+	u32 ssdr_physical;
+
+	/* SSP masks*/
+	u32 dma_cr1;
+	u32 int_cr1;
+	u32 clear_sr;
+	u32 mask_sr;
+
+	/* Maximun clock rate */
+	unsigned long max_clk_rate;
+
+	/* Message Transfer pump */
+	struct tasklet_struct pump_transfers;
+
+	/* DMA engine support */
+	struct dma_chan *rx_chan;
+	struct dma_chan *tx_chan;
+	struct sg_table rx_sgt;
+	struct sg_table tx_sgt;
+	int rx_nents;
+	int tx_nents;
+	void *dummy;
+	atomic_t dma_running;
+
+	/* Current message transfer state info */
+	struct spi_message *cur_msg;
+	struct spi_transfer *cur_transfer;
+	struct chip_data *cur_chip;
+	size_t len;
+	void *tx;
+	void *tx_end;
+	void *rx;
+	void *rx_end;
+	int dma_mapped;
+	dma_addr_t rx_dma;
+	dma_addr_t tx_dma;
+	size_t rx_map_len;
+	size_t tx_map_len;
+	u8 n_bytes;
+	int (*write)(struct driver_data *drv_data);
+	int (*read)(struct driver_data *drv_data);
+	irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
+	void (*cs_control)(u32 command);
+
+	void __iomem *lpss_base;
+};
+
+struct chip_data {
+	u32 cr0;
+	u32 cr1;
+	u32 psp;
+	u32 timeout;
+	u8 n_bytes;
+	u32 dma_burst_size;
+	u32 threshold;
+	u32 dma_threshold;
+	u16 lpss_rx_threshold;
+	u16 lpss_tx_threshold;
+	u8 enable_dma;
+	u8 bits_per_word;
+	u32 speed_hz;
+	union {
+		int gpio_cs;
+		unsigned int frm;
+	};
+	int gpio_cs_inverted;
+	int (*write)(struct driver_data *drv_data);
+	int (*read)(struct driver_data *drv_data);
+	void (*cs_control)(u32 command);
+};
+
+#define DEFINE_SSP_REG(reg, off) \
+static inline u32 read_##reg(void const __iomem *p) \
+{ return __raw_readl(p + (off)); } \
+\
+static inline void write_##reg(u32 v, void __iomem *p) \
+{ __raw_writel(v, p + (off)); }
+
+DEFINE_SSP_REG(SSCR0, 0x00)
+DEFINE_SSP_REG(SSCR1, 0x04)
+DEFINE_SSP_REG(SSSR, 0x08)
+DEFINE_SSP_REG(SSITR, 0x0c)
+DEFINE_SSP_REG(SSDR, 0x10)
+DEFINE_SSP_REG(SSTO, 0x28)
+DEFINE_SSP_REG(SSPSP, 0x2c)
+DEFINE_SSP_REG(SSITF, SSITF)
+DEFINE_SSP_REG(SSIRF, SSIRF)
+
+#define START_STATE ((void *)0)
+#define RUNNING_STATE ((void *)1)
+#define DONE_STATE ((void *)2)
+#define ERROR_STATE ((void *)-1)
+
+#define IS_DMA_ALIGNED(x)	IS_ALIGNED((unsigned long)(x), DMA_ALIGNMENT)
+#define DMA_ALIGNMENT		8
+
+static inline int pxa25x_ssp_comp(struct driver_data *drv_data)
+{
+	if (drv_data->ssp_type == PXA25x_SSP)
+		return 1;
+	if (drv_data->ssp_type == CE4100_SSP)
+		return 1;
+	return 0;
+}
+
+static inline void write_SSSR_CS(struct driver_data *drv_data, u32 val)
+{
+	void __iomem *reg = drv_data->ioaddr;
+
+	if (drv_data->ssp_type == CE4100_SSP)
+		val |= read_SSSR(reg) & SSSR_ALT_FRM_MASK;
+
+	write_SSSR(val, reg);
+}
+
+extern int pxa2xx_spi_flush(struct driver_data *drv_data);
+extern void *pxa2xx_spi_next_transfer(struct driver_data *drv_data);
+
+/*
+ * Select the right DMA implementation.
+ */
+#if defined(CONFIG_SPI_PXA2XX_PXADMA)
+#define SPI_PXA2XX_USE_DMA	1
+#define MAX_DMA_LEN		8191
+#define DEFAULT_DMA_CR1		(SSCR1_TSRE | SSCR1_RSRE | SSCR1_TINTE)
+#elif defined(CONFIG_SPI_PXA2XX_DMA)
+#define SPI_PXA2XX_USE_DMA	1
+#define MAX_DMA_LEN		SZ_64K
+#define DEFAULT_DMA_CR1		(SSCR1_TSRE | SSCR1_RSRE | SSCR1_TRAIL)
+#else
+#undef SPI_PXA2XX_USE_DMA
+#define MAX_DMA_LEN		0
+#define DEFAULT_DMA_CR1		0
+#endif
+
+#ifdef SPI_PXA2XX_USE_DMA
+extern bool pxa2xx_spi_dma_is_possible(size_t len);
+extern int pxa2xx_spi_map_dma_buffers(struct driver_data *drv_data);
+extern irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data);
+extern int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, u32 dma_burst);
+extern void pxa2xx_spi_dma_start(struct driver_data *drv_data);
+extern int pxa2xx_spi_dma_setup(struct driver_data *drv_data);
+extern void pxa2xx_spi_dma_release(struct driver_data *drv_data);
+extern void pxa2xx_spi_dma_resume(struct driver_data *drv_data);
+extern int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
+						  struct spi_device *spi,
+						  u8 bits_per_word,
+						  u32 *burst_code,
+						  u32 *threshold);
+#else
+static inline bool pxa2xx_spi_dma_is_possible(size_t len) { return false; }
+static inline int pxa2xx_spi_map_dma_buffers(struct driver_data *drv_data)
+{
+	return 0;
+}
+#define pxa2xx_spi_dma_transfer NULL
+static inline void pxa2xx_spi_dma_prepare(struct driver_data *drv_data,
+					  u32 dma_burst) {}
+static inline void pxa2xx_spi_dma_start(struct driver_data *drv_data) {}
+static inline int pxa2xx_spi_dma_setup(struct driver_data *drv_data)
+{
+	return 0;
+}
+static inline void pxa2xx_spi_dma_release(struct driver_data *drv_data) {}
+static inline void pxa2xx_spi_dma_resume(struct driver_data *drv_data) {}
+static inline int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
+							 struct spi_device *spi,
+							 u8 bits_per_word,
+							 u32 *burst_code,
+							 u32 *threshold)
+{
+	return -ENODEV;
+}
+#endif
+
+#endif /* SPI_PXA2XX_H */

drivers/spi/spi-s3c64xx.c

@@ -62,7 +62,7 @@
 #define S3C64XX_SPI_CLKSEL_SRCMSK	(3<<9)
 #define S3C64XX_SPI_CLKSEL_SRCSHFT	9
 #define S3C64XX_SPI_ENCLK_ENABLE	(1<<8)
-#define S3C64XX_SPI_PSR_MASK 		0xff
+#define S3C64XX_SPI_PSR_MASK		0xff
 
 #define S3C64XX_SPI_MODE_CH_TSZ_BYTE		(0<<29)
 #define S3C64XX_SPI_MODE_CH_TSZ_HALFWORD	(1<<29)
@@ -697,7 +697,7 @@ static int s3c64xx_spi_transfer_one_message(struct spi_master *master,
 		INIT_COMPLETION(sdd->xfer_completion);
 
 		/* Only BPW and Speed may change across transfers */
-		bpw = xfer->bits_per_word ? : spi->bits_per_word;
+		bpw = xfer->bits_per_word;
 		speed = xfer->speed_hz ? : spi->max_speed_hz;
 
 		if (xfer->len % (bpw / 8)) {
@@ -743,8 +743,7 @@ static int s3c64xx_spi_transfer_one_message(struct spi_master *master,
 		       sdd->regs + S3C64XX_SPI_SLAVE_SEL);
 
 		if (status) {
-			dev_err(&spi->dev, "I/O Error: "
-				"rx-%d tx-%d res:rx-%c tx-%c len-%d\n",
+			dev_err(&spi->dev, "I/O Error: rx-%d tx-%d res:rx-%c tx-%c len-%d\n",
 				xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0,
 				(sdd->state & RXBUSY) ? 'f' : 'p',
 				(sdd->state & TXBUSY) ? 'f' : 'p',
@@ -799,7 +798,7 @@ static int s3c64xx_spi_prepare_transfer(struct spi_master *spi)
 
 	/* Acquire DMA channels */
 	while (!acquire_dma(sdd))
-		msleep(10);
+		usleep_range(10000, 11000);
 
 	pm_runtime_get_sync(&sdd->pdev->dev);
 
@@ -841,16 +840,14 @@ static struct s3c64xx_spi_csinfo *s3c64xx_get_slave_ctrldata(
 
 	cs = kzalloc(sizeof(*cs), GFP_KERNEL);
 	if (!cs) {
-		dev_err(&spi->dev, "could not allocate memory for controller"
-					" data\n");
+		dev_err(&spi->dev, "could not allocate memory for controller data\n");
 		of_node_put(data_np);
 		return ERR_PTR(-ENOMEM);
 	}
 
 	cs->line = of_get_named_gpio(data_np, "cs-gpio", 0);
 	if (!gpio_is_valid(cs->line)) {
-		dev_err(&spi->dev, "chip select gpio is not specified or "
-					"invalid\n");
+		dev_err(&spi->dev, "chip select gpio is not specified or invalid\n");
 		kfree(cs);
 		of_node_put(data_np);
 		return ERR_PTR(-EINVAL);
@@ -957,6 +954,8 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
 		if (spi->max_speed_hz >= speed) {
 			spi->max_speed_hz = speed;
 		} else {
+			dev_err(&spi->dev, "Can't set %dHz transfer speed\n",
+				spi->max_speed_hz);
 			err = -EINVAL;
 			goto setup_exit;
 		}
@@ -1076,8 +1075,8 @@ static int s3c64xx_spi_get_dmares(
 	if (!sdd->pdev->dev.of_node) {
 		res = platform_get_resource(pdev, IORESOURCE_DMA, tx ? 0 : 1);
 		if (!res) {
-			dev_err(&pdev->dev, "Unable to get SPI-%s dma "
-					"resource\n", chan_str);
+			dev_err(&pdev->dev, "Unable to get SPI-%s dma resource\n",
+				chan_str);
 			return -ENXIO;
 		}
 		dma_data->dmach = res->start;
@@ -1133,8 +1132,7 @@ static void s3c64xx_spi_dt_gpio_free(struct s3c64xx_spi_driver_data *sdd)
 		gpio_free(sdd->gpios[idx]);
 }
 
-static struct s3c64xx_spi_info * s3c64xx_spi_parse_dt(
-						struct device *dev)
+static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev)
 {
 	struct s3c64xx_spi_info *sci;
 	u32 temp;
@@ -1146,16 +1144,14 @@ static struct s3c64xx_spi_info * s3c64xx_spi_parse_dt(
 	}
 
 	if (of_property_read_u32(dev->of_node, "samsung,spi-src-clk", &temp)) {
-		dev_warn(dev, "spi bus clock parent not specified, using "
-				"clock at index 0 as parent\n");
+		dev_warn(dev, "spi bus clock parent not specified, using clock at index 0 as parent\n");
 		sci->src_clk_nr = 0;
 	} else {
 		sci->src_clk_nr = temp;
 	}
 
 	if (of_property_read_u32(dev->of_node, "num-cs", &temp)) {
-		dev_warn(dev, "number of chip select lines not specified, "
-				"assuming 1 chip select line\n");
+		dev_warn(dev, "number of chip select lines not specified, assuming 1 chip select line\n");
 		sci->num_cs = 1;
 	} else {
 		sci->num_cs = temp;
@@ -1195,7 +1191,7 @@ static inline struct s3c64xx_spi_port_config *s3c64xx_spi_get_port_config(
 			 platform_get_device_id(pdev)->driver_data;
 }
 
-static int __init s3c64xx_spi_probe(struct platform_device *pdev)
+static int s3c64xx_spi_probe(struct platform_device *pdev)
 {
 	struct resource	*mem_res;
 	struct s3c64xx_spi_driver_data *sdd;
@@ -1245,8 +1241,8 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
 	if (pdev->dev.of_node) {
 		ret = of_alias_get_id(pdev->dev.of_node, "spi");
 		if (ret < 0) {
-			dev_err(&pdev->dev, "failed to get alias id, "
-						"errno %d\n", ret);
+			dev_err(&pdev->dev, "failed to get alias id, errno %d\n",
+				ret);
 			goto err0;
 		}
 		sdd->port_id = ret;
@@ -1280,7 +1276,7 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
 	if (sdd->regs == NULL) {
 		dev_err(&pdev->dev, "Unable to remap IO\n");
 		ret = -ENXIO;
-		goto err1;
+		goto err0;
 	}
 
 	if (!sci->cfg_gpio && pdev->dev.of_node) {
@@ -1289,36 +1285,36 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
 	} else if (sci->cfg_gpio == NULL || sci->cfg_gpio()) {
 		dev_err(&pdev->dev, "Unable to config gpio\n");
 		ret = -EBUSY;
-		goto err2;
+		goto err0;
 	}
 
 	/* Setup clocks */
-	sdd->clk = clk_get(&pdev->dev, "spi");
+	sdd->clk = devm_clk_get(&pdev->dev, "spi");
 	if (IS_ERR(sdd->clk)) {
 		dev_err(&pdev->dev, "Unable to acquire clock 'spi'\n");
 		ret = PTR_ERR(sdd->clk);
-		goto err3;
+		goto err1;
 	}
 
 	if (clk_prepare_enable(sdd->clk)) {
 		dev_err(&pdev->dev, "Couldn't enable clock 'spi'\n");
 		ret = -EBUSY;
-		goto err4;
+		goto err1;
 	}
 
 	sprintf(clk_name, "spi_busclk%d", sci->src_clk_nr);
-	sdd->src_clk = clk_get(&pdev->dev, clk_name);
+	sdd->src_clk = devm_clk_get(&pdev->dev, clk_name);
 	if (IS_ERR(sdd->src_clk)) {
 		dev_err(&pdev->dev,
 			"Unable to acquire clock '%s'\n", clk_name);
 		ret = PTR_ERR(sdd->src_clk);
-		goto err5;
+		goto err2;
 	}
 
 	if (clk_prepare_enable(sdd->src_clk)) {
 		dev_err(&pdev->dev, "Couldn't enable clock '%s'\n", clk_name);
 		ret = -EBUSY;
-		goto err6;
+		goto err2;
 	}
 
 	/* Setup Deufult Mode */
@@ -1328,11 +1324,12 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
 	init_completion(&sdd->xfer_completion);
 	INIT_LIST_HEAD(&sdd->queue);
 
-	ret = request_irq(irq, s3c64xx_spi_irq, 0, "spi-s3c64xx", sdd);
+	ret = devm_request_irq(&pdev->dev, irq, s3c64xx_spi_irq, 0,
+				"spi-s3c64xx", sdd);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request IRQ %d: %d\n",
 			irq, ret);
-		goto err7;
+		goto err3;
 	}
 
 	writel(S3C64XX_SPI_INT_RX_OVERRUN_EN | S3C64XX_SPI_INT_RX_UNDERRUN_EN |
@@ -1342,11 +1339,10 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
 	if (spi_register_master(master)) {
 		dev_err(&pdev->dev, "cannot register SPI master\n");
 		ret = -EBUSY;
-		goto err8;
+		goto err3;
 	}
 
-	dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d "
-					"with %d Slaves attached\n",
+	dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d with %d Slaves attached\n",
 					sdd->port_id, master->num_chipselect);
 	dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\tDMA=[Rx-%d, Tx-%d]\n",
 					mem_res->end, mem_res->start,
@@ -1356,21 +1352,13 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
 
 	return 0;
 
-err8:
-	free_irq(irq, sdd);
-err7:
+err3:
 	clk_disable_unprepare(sdd->src_clk);
-err6:
-	clk_put(sdd->src_clk);
-err5:
+err2:
 	clk_disable_unprepare(sdd->clk);
-err4:
-	clk_put(sdd->clk);
-err3:
+err1:
 	if (!sdd->cntrlr_info->cfg_gpio && pdev->dev.of_node)
 		s3c64xx_spi_dt_gpio_free(sdd);
-err2:
-err1:
 err0:
 	platform_set_drvdata(pdev, NULL);
 	spi_master_put(master);
@@ -1389,13 +1377,9 @@ static int s3c64xx_spi_remove(struct platform_device *pdev)
 
 	writel(0, sdd->regs + S3C64XX_SPI_INT_EN);
 
-	free_irq(platform_get_irq(pdev, 0), sdd);
-
 	clk_disable_unprepare(sdd->src_clk);
-	clk_put(sdd->src_clk);
 
 	clk_disable_unprepare(sdd->clk);
-	clk_put(sdd->clk);
 
 	if (!sdd->cntrlr_info->cfg_gpio && pdev->dev.of_node)
 		s3c64xx_spi_dt_gpio_free(sdd);

drivers/spi/spi-sh-msiof.c

@@ -20,6 +20,7 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 
@@ -592,6 +593,37 @@ static u32 sh_msiof_spi_txrx_word(struct spi_device *spi, unsigned nsecs,
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static struct sh_msiof_spi_info *sh_msiof_spi_parse_dt(struct device *dev)
+{
+	struct sh_msiof_spi_info *info;
+	struct device_node *np = dev->of_node;
+	u32 num_cs = 0;
+
+	info = devm_kzalloc(dev, sizeof(struct sh_msiof_spi_info), GFP_KERNEL);
+	if (!info) {
+		dev_err(dev, "failed to allocate setup data\n");
+		return NULL;
+	}
+
+	/* Parse the MSIOF properties */
+	of_property_read_u32(np, "num-cs", &num_cs);
+	of_property_read_u32(np, "renesas,tx-fifo-size",
+					&info->tx_fifo_override);
+	of_property_read_u32(np, "renesas,rx-fifo-size",
+					&info->rx_fifo_override);
+
+	info->num_chipselect = num_cs;
+
+	return info;
+}
+#else
+static struct sh_msiof_spi_info *sh_msiof_spi_parse_dt(struct device *dev)
+{
+	return NULL;
+}
+#endif
+
 static int sh_msiof_spi_probe(struct platform_device *pdev)
 {
 	struct resource	*r;
@@ -610,7 +642,17 @@ static int sh_msiof_spi_probe(struct platform_device *pdev)
 	p = spi_master_get_devdata(master);
 
 	platform_set_drvdata(pdev, p);
-	p->info = pdev->dev.platform_data;
+	if (pdev->dev.of_node)
+		p->info = sh_msiof_spi_parse_dt(&pdev->dev);
+	else
+		p->info = pdev->dev.platform_data;
+
+	if (!p->info) {
+		dev_err(&pdev->dev, "failed to obtain device info\n");
+		ret = -ENXIO;
+		goto err1;
+	}
+
 	init_completion(&p->done);
 
 	p->clk = clk_get(&pdev->dev, NULL);
@@ -715,6 +757,17 @@ static int sh_msiof_spi_runtime_nop(struct device *dev)
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id sh_msiof_match[] = {
+	{ .compatible = "renesas,sh-msiof", },
+	{ .compatible = "renesas,sh-mobile-msiof", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sh_msiof_match);
+#else
+#define sh_msiof_match NULL
+#endif
+
 static struct dev_pm_ops sh_msiof_spi_dev_pm_ops = {
 	.runtime_suspend = sh_msiof_spi_runtime_nop,
 	.runtime_resume = sh_msiof_spi_runtime_nop,
@@ -727,6 +780,7 @@ static struct platform_driver sh_msiof_spi_drv = {
 		.name		= "spi_sh_msiof",
 		.owner		= THIS_MODULE,
 		.pm		= &sh_msiof_spi_dev_pm_ops,
+		.of_match_table = sh_msiof_match,
 	},
 };
 module_platform_driver(sh_msiof_spi_drv);

drivers/spi/spi-sirf.c

@@ -382,8 +382,7 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 
 	sspi = spi_master_get_devdata(spi->master);
 
-	bits_per_word = t && t->bits_per_word ? t->bits_per_word :
-		spi->bits_per_word;
+	bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
 	hz = t && t->speed_hz ? t->speed_hz : spi->max_speed_hz;
 
 	/* Enable IO mode for RX, TX */
@@ -570,7 +569,7 @@ static int spi_sirfsoc_probe(struct platform_device *pdev)
 		ret = -EINVAL;
 		goto free_pin;
 	}
-	clk_enable(sspi->clk);
+	clk_prepare_enable(sspi->clk);
 	sspi->ctrl_freq = clk_get_rate(sspi->clk);
 
 	init_completion(&sspi->done);
@@ -594,7 +593,7 @@ static int spi_sirfsoc_probe(struct platform_device *pdev)
 	return 0;
 
 free_clk:
-	clk_disable(sspi->clk);
+	clk_disable_unprepare(sspi->clk);
 	clk_put(sspi->clk);
 free_pin:
 	pinctrl_put(sspi->p);
@@ -618,7 +617,7 @@ static int  spi_sirfsoc_remove(struct platform_device *pdev)
 		if (sspi->chipselect[i] > 0)
 			gpio_free(sspi->chipselect[i]);
 	}
-	clk_disable(sspi->clk);
+	clk_disable_unprepare(sspi->clk);
 	clk_put(sspi->clk);
 	pinctrl_put(sspi->p);
 	spi_master_put(master);
@@ -659,6 +658,7 @@ static const struct dev_pm_ops spi_sirfsoc_pm_ops = {
 
 static const struct of_device_id spi_sirfsoc_of_match[] = {
 	{ .compatible = "sirf,prima2-spi", },
+	{ .compatible = "sirf,marco-spi", },
 	{}
 };
 MODULE_DEVICE_TABLE(of, sirfsoc_spi_of_match);

drivers/spi/spi-tegra20-sflash.c

@@ -269,9 +269,7 @@ static int tegra_sflash_start_transfer_one(struct spi_device *spi,
 	u32 speed;
 	unsigned long command;
 
-	speed = t->speed_hz ? t->speed_hz : spi->max_speed_hz;
-	if (!speed)
-		speed = tsd->spi_max_frequency;
+	speed = t->speed_hz;
 	if (speed != tsd->cur_speed) {
 		clk_set_rate(tsd->clk, speed);
 		tsd->cur_speed = speed;
@@ -319,6 +317,15 @@ static int tegra_sflash_start_transfer_one(struct spi_device *spi,
 	return  tegra_sflash_start_cpu_based_transfer(tsd, t);
 }
 
+static int tegra_sflash_setup(struct spi_device *spi)
+{
+	struct tegra_sflash_data *tsd = spi_master_get_devdata(spi->master);
+
+	/* Set speed to the spi max fequency if spi device has not set */
+	spi->max_speed_hz = spi->max_speed_hz ? : tsd->spi_max_frequency;
+	return 0;
+}
+
 static int tegra_sflash_transfer_one_message(struct spi_master *master,
 			struct spi_message *msg)
 {
@@ -492,6 +499,7 @@ static int tegra_sflash_probe(struct platform_device *pdev)
 
 	/* the spi->mode bits understood by this driver: */
 	master->mode_bits = SPI_CPOL | SPI_CPHA;
+	master->setup = tegra_sflash_setup;
 	master->transfer_one_message = tegra_sflash_transfer_one_message;
 	master->num_chipselect = MAX_CHIP_SELECT;
 	master->bus_num = -1;

drivers/spi/spi-tegra20-slink.c

@@ -284,8 +284,7 @@ static unsigned tegra_slink_calculate_curr_xfer_param(
 	unsigned max_len;
 	unsigned total_fifo_words;
 
-	bits_per_word = t->bits_per_word ? t->bits_per_word :
-						spi->bits_per_word;
+	bits_per_word = t->bits_per_word;
 	tspi->bytes_per_word = (bits_per_word - 1) / 8 + 1;
 
 	if (bits_per_word == 8 || bits_per_word == 16) {
@@ -378,8 +377,7 @@ static unsigned int tegra_slink_read_rx_fifo_to_client_rxbuf(
 	} else {
 		unsigned int bits_per_word;
 
-		bits_per_word = t->bits_per_word ? t->bits_per_word :
-						tspi->cur_spi->bits_per_word;
+		bits_per_word = t->bits_per_word;
 		for (count = 0; count < rx_full_count; count++) {
 			x = tegra_slink_readl(tspi, SLINK_RX_FIFO);
 			for (i = 0; (i < tspi->bytes_per_word); i++)
@@ -444,8 +442,7 @@ static void tegra_slink_copy_spi_rxbuf_to_client_rxbuf(
 		unsigned int x;
 		unsigned int rx_mask, bits_per_word;
 
-		bits_per_word = t->bits_per_word ? t->bits_per_word :
-						tspi->cur_spi->bits_per_word;
+		bits_per_word = t->bits_per_word;
 		rx_mask = (1 << bits_per_word) - 1;
 		for (count = 0; count < tspi->curr_dma_words; count++) {
 			x = tspi->rx_dma_buf[count];
@@ -728,9 +725,7 @@ static int tegra_slink_start_transfer_one(struct spi_device *spi,
 	unsigned long command2;
 
 	bits_per_word = t->bits_per_word;
-	speed = t->speed_hz ? t->speed_hz : spi->max_speed_hz;
-	if (!speed)
-		speed = tspi->spi_max_frequency;
+	speed = t->speed_hz;
 	if (speed != tspi->cur_speed) {
 		clk_set_rate(tspi->clk, speed * 4);
 		tspi->cur_speed = speed;
@@ -841,6 +836,8 @@ static int tegra_slink_setup(struct spi_device *spi)
 
 	BUG_ON(spi->chip_select >= MAX_CHIP_SELECT);
 
+	/* Set speed to the spi max fequency if spi device has not set */
+	spi->max_speed_hz = spi->max_speed_hz ? : tspi->spi_max_frequency;
 	ret = pm_runtime_get_sync(tspi->dev);
 	if (ret < 0) {
 		dev_err(tspi->dev, "pm runtime failed, e = %d\n", ret);

drivers/spi/spi-txx9.c

@@ -189,9 +189,8 @@ static void txx9spi_work_one(struct txx9spi *c, struct spi_message *m)
 		unsigned int len = t->len;
 		unsigned int wsize;
 		u32 speed_hz = t->speed_hz ? : spi->max_speed_hz;
-		u8 bits_per_word = t->bits_per_word ? : spi->bits_per_word;
+		u8 bits_per_word = t->bits_per_word;
 
-		bits_per_word = bits_per_word ? : 8;
 		wsize = bits_per_word >> 3; /* in bytes */
 
 		if (prev_speed_hz != speed_hz
@@ -316,9 +315,8 @@ static int txx9spi_transfer(struct spi_device *spi, struct spi_message *m)
 	/* check each transfer's parameters */
 	list_for_each_entry (t, &m->transfers, transfer_list) {
 		u32 speed_hz = t->speed_hz ? : spi->max_speed_hz;
-		u8 bits_per_word = t->bits_per_word ? : spi->bits_per_word;
+		u8 bits_per_word = t->bits_per_word;
 
-		bits_per_word = bits_per_word ? : 8;
 		if (!t->tx_buf && !t->rx_buf && t->len)
 			return -EINVAL;
 		if (bits_per_word != 8 && bits_per_word != 16)
@@ -337,7 +335,7 @@ static int txx9spi_transfer(struct spi_device *spi, struct spi_message *m)
 	return 0;
 }
 
-static int __init txx9spi_probe(struct platform_device *dev)
+static int txx9spi_probe(struct platform_device *dev)
 {
 	struct spi_master *master;
 	struct txx9spi *c;
@@ -432,7 +430,7 @@ exit:
 	return ret;
 }
 
-static int __exit txx9spi_remove(struct platform_device *dev)
+static int txx9spi_remove(struct platform_device *dev)
 {
 	struct spi_master *master = spi_master_get(platform_get_drvdata(dev));
 	struct txx9spi *c = spi_master_get_devdata(master);
@@ -450,7 +448,7 @@ static int __exit txx9spi_remove(struct platform_device *dev)
 MODULE_ALIAS("platform:spi_txx9");
 
 static struct platform_driver txx9spi_driver = {
-	.remove = __exit_p(txx9spi_remove),
+	.remove = txx9spi_remove,
 	.driver = {
 		.name = "spi_txx9",
 		.owner = THIS_MODULE,

drivers/spi/spi.c

@@ -1080,7 +1080,8 @@ static int of_spi_register_master(struct spi_master *master)
 	if (!master->cs_gpios)
 		return -ENOMEM;
 
-	memset(cs, -EINVAL, master->num_chipselect);
+	for (i = 0; i < master->num_chipselect; i++)
+		cs[i] = -EINVAL;
 
 	for (i = 0; i < nb; i++)
 		cs[i] = of_get_named_gpio(np, "cs-gpios", i);
@@ -1135,6 +1136,9 @@ int spi_register_master(struct spi_master *master)
 	if (master->num_chipselect == 0)
 		return -EINVAL;
 
+	if ((master->bus_num < 0) && master->dev.of_node)
+		master->bus_num = of_alias_get_id(master->dev.of_node, "spi");
+
 	/* convention:  dynamically assigned bus IDs count down from the max */
 	if (master->bus_num < 0) {
 		/* FIXME switch to an IDR based scheme, something like
@@ -1366,12 +1370,14 @@ static int __spi_async(struct spi_device *spi, struct spi_message *message)
 	}
 
 	/**
-	 * Set transfer bits_per_word as spi device default if it is not
-	 * set for this transfer.
+	 * Set transfer bits_per_word and max speed as spi device default if
+	 * it is not set for this transfer.
 	 */
 	list_for_each_entry(xfer, &message->transfers, transfer_list) {
 		if (!xfer->bits_per_word)
 			xfer->bits_per_word = spi->bits_per_word;
+		if (!xfer->speed_hz)
+			xfer->speed_hz = spi->max_speed_hz;
 	}
 
 	message->spi = spi;
@@ -1656,7 +1662,8 @@ int spi_write_then_read(struct spi_device *spi,
 	 * using the pre-allocated buffer or the transfer is too large.
 	 */
 	if ((n_tx + n_rx) > SPI_BUFSIZ || !mutex_trylock(&lock)) {
-		local_buf = kmalloc(max((unsigned)SPI_BUFSIZ, n_tx + n_rx), GFP_KERNEL);
+		local_buf = kmalloc(max((unsigned)SPI_BUFSIZ, n_tx + n_rx),
+				    GFP_KERNEL | GFP_DMA);
 		if (!local_buf)
 			return -ENOMEM;
 	} else {

include/linux/platform_data/spi-omap2-mcspi.h

@@ -22,6 +22,9 @@ struct omap2_mcspi_dev_attr {
 
 struct omap2_mcspi_device_config {
 	unsigned turbo_mode:1;
+
+	/* toggle chip select after every word */
+	unsigned cs_per_word:1;
 };
 
 #endif

include/linux/pxa2xx_ssp.h

@@ -155,6 +155,14 @@
 #define SSACD_ACDS(x)		((x) << 0)	/* Audio clock divider select */
 #define SSACD_SCDX8		(1 << 7)	/* SYSCLK division ratio select */
 
+/* LPSS SSP */
+#define SSITF			0x44		/* TX FIFO trigger level */
+#define SSITF_TxLoThresh(x)	(((x) - 1) << 8)
+#define SSITF_TxHiThresh(x)	((x) - 1)
+
+#define SSIRF			0x48		/* RX FIFO trigger level */
+#define SSIRF_RxThresh(x)	((x) - 1)
+
 enum pxa_ssp_type {
 	SSP_UNDEFINED = 0,
 	PXA25x_SSP,  /* pxa 210, 250, 255, 26x */
@@ -164,6 +172,7 @@ enum pxa_ssp_type {
 	PXA168_SSP,
 	PXA910_SSP,
 	CE4100_SSP,
+	LPSS_SSP,
 };
 
 struct ssp_device {
@@ -206,6 +215,15 @@ static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg)
 	return __raw_readl(dev->mmio_base + reg);
 }
 
+#ifdef CONFIG_ARCH_PXA
 struct ssp_device *pxa_ssp_request(int port, const char *label);
 void pxa_ssp_free(struct ssp_device *);
+#else
+static inline struct ssp_device *pxa_ssp_request(int port, const char *label)
+{
+	return NULL;
+}
+static inline void pxa_ssp_free(struct ssp_device *ssp) {}
+#endif
+
 #endif

include/linux/spi/pxa2xx_spi.h

@@ -28,6 +28,15 @@ struct pxa2xx_spi_master {
 	u32 clock_enable;
 	u16 num_chipselect;
 	u8 enable_dma;
+
+	/* DMA engine specific config */
+	int rx_chan_id;
+	int tx_chan_id;
+	int rx_slave_id;
+	int tx_slave_id;
+
+	/* For non-PXA arches */
+	struct ssp_device ssp;
 };
 
 /* spi_board_info.controller_data for SPI slave devices,
@@ -35,6 +44,7 @@ struct pxa2xx_spi_master {
  */
 struct pxa2xx_spi_chip {
 	u8 tx_threshold;
+	u8 tx_hi_threshold;
 	u8 rx_threshold;
 	u8 dma_burst_size;
 	u32 timeout;
@@ -50,103 +60,5 @@ struct pxa2xx_spi_chip {
 
 extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info);
 
-#else
-/*
- * This is the implemtation for CE4100 on x86. ARM defines them in mach/ or
- * plat/ include path.
- * The CE4100 does not provide DMA support. This bits are here to let the driver
- * compile and will never be used. Maybe we get DMA support at a later point in
- * time.
- */
-
-#define DCSR(n)         (n)
-#define DSADR(n)        (n)
-#define DTADR(n)        (n)
-#define DCMD(n)         (n)
-#define DRCMR(n)        (n)
-
-#define DCSR_RUN	(1 << 31)	/* Run Bit */
-#define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch */
-#define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable */
-#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
-#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
-#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt */
-#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt */
-#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt */
-
-#define DCSR_EORIRQEN	(1 << 28)	/* End of Receive Interrupt Enable */
-#define DCSR_EORJMPEN	(1 << 27)	/* Jump to next descriptor on EOR */
-#define DCSR_EORSTOPEN	(1 << 26)	/* STOP on an EOR */
-#define DCSR_SETCMPST	(1 << 25)	/* Set Descriptor Compare Status */
-#define DCSR_CLRCMPST	(1 << 24)	/* Clear Descriptor Compare Status */
-#define DCSR_CMPST	(1 << 10)	/* The Descriptor Compare Status */
-#define DCSR_EORINTR	(1 << 9)	/* The end of Receive */
-
-#define DRCMR_MAPVLD	(1 << 7)	/* Map Valid */
-#define DRCMR_CHLNUM	0x1f		/* mask for Channel Number */
-
-#define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor */
-#define DDADR_STOP	(1 << 0)	/* Stop */
-
-#define DCMD_INCSRCADDR	(1 << 31)	/* Source Address Increment Setting. */
-#define DCMD_INCTRGADDR	(1 << 30)	/* Target Address Increment Setting. */
-#define DCMD_FLOWSRC	(1 << 29)	/* Flow Control by the source. */
-#define DCMD_FLOWTRG	(1 << 28)	/* Flow Control by the target. */
-#define DCMD_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
-#define DCMD_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
-#define DCMD_ENDIAN	(1 << 18)	/* Device Endian-ness. */
-#define DCMD_BURST8	(1 << 16)	/* 8 byte burst */
-#define DCMD_BURST16	(2 << 16)	/* 16 byte burst */
-#define DCMD_BURST32	(3 << 16)	/* 32 byte burst */
-#define DCMD_WIDTH1	(1 << 14)	/* 1 byte width */
-#define DCMD_WIDTH2	(2 << 14)	/* 2 byte width (HalfWord) */
-#define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
-#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
-
-/*
- * Descriptor structure for PXA's DMA engine
- * Note: this structure must always be aligned to a 16-byte boundary.
- */
-
-typedef enum {
-	DMA_PRIO_HIGH = 0,
-	DMA_PRIO_MEDIUM = 1,
-	DMA_PRIO_LOW = 2
-} pxa_dma_prio;
-
-/*
- * DMA registration
- */
-
-static inline int pxa_request_dma(char *name,
-		pxa_dma_prio prio,
-		void (*irq_handler)(int, void *),
-		void *data)
-{
-	return -ENODEV;
-}
-
-static inline void pxa_free_dma(int dma_ch)
-{
-}
-
-/*
- * The CE4100 does not have the clk framework implemented and SPI clock can
- * not be switched on/off or the divider changed.
- */
-static inline void clk_disable(struct clk *clk)
-{
-}
-
-static inline int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-
-static inline unsigned long clk_get_rate(struct clk *clk)
-{
-	return 3686400;
-}
-
 #endif
 #endif

include/linux/spi/spi.h

@@ -57,6 +57,8 @@ extern struct bus_type spi_bus_type;
  * @modalias: Name of the driver to use with this device, or an alias
  *	for that name.  This appears in the sysfs "modalias" attribute
  *	for driver coldplugging, and in uevents used for hotplugging
+ * @cs_gpio: gpio number of the chipselect line (optional, -EINVAL when
+ *	when not using a GPIO line)
  *
  * A @spi_device is used to interchange data between an SPI slave
  * (usually a discrete chip) and CPU memory.
@@ -258,6 +260,9 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
  * @unprepare_transfer_hardware: there are currently no more messages on the
  *	queue so the subsystem notifies the driver that it may relax the
  *	hardware by issuing this call
+ * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS
+ *	number. Any individual value may be -EINVAL for CS lines that
+ *	are not GPIOs (driven by the SPI controller itself).
  *
  * Each SPI master controller can communicate with one or more @spi_device
  * children.  These make a small bus, sharing MOSI, MISO and SCK signals

include/linux/spi/spi_gpio.h

@@ -62,8 +62,8 @@
  */
 struct spi_gpio_platform_data {
 	unsigned	sck;
-	unsigned	mosi;
-	unsigned	miso;
+	unsigned long	mosi;
+	unsigned long	miso;
 
 	u16		num_chipselect;
 };