[media] em28xx: Add a separate config dir for secondary bus

Prepare to register a separate bus for the second bus.
For now, just add a new field. A latter patch will add the
bits to make it work.
This patch was generated by this script:
perl -e 'while (<>) { if (s/EM2874_I2C_SECONDARY_BUS_SELECT.*\n//) {
	printf "\t\t.def_i2c_bus  = 1,\n"; $found = 1; print $_ } else { if ($found) { s/^\s+// }; $found = 0; print $_; } }' \
drivers/media/usb/em28xx/em28xx-cards.c >a && mv a drivers/media/usb/em28xx/em28xx-cards.c

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/usb/em28xx/em28xx-cards.c

@@ -958,8 +958,8 @@ struct em28xx_board em28xx_boards[] = {
 #else
 		.tuner_type   = TUNER_ABSENT,
 #endif
-		.i2c_speed    = EM2874_I2C_SECONDARY_BUS_SELECT |
-				EM28XX_I2C_CLK_WAIT_ENABLE |
+		.def_i2c_bus  = 1,
+		.i2c_speed    = EM28XX_I2C_CLK_WAIT_ENABLE |
 				EM28XX_I2C_FREQ_400_KHZ,
 	},
 	[EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = {
@@ -974,8 +974,8 @@ struct em28xx_board em28xx_boards[] = {
 		.tuner_type   = TUNER_ABSENT,
 #endif
 		.ir_codes     = RC_MAP_HAUPPAUGE,
-		.i2c_speed    = EM2874_I2C_SECONDARY_BUS_SELECT |
-				EM28XX_I2C_CLK_WAIT_ENABLE |
+		.def_i2c_bus  = 1,
+		.i2c_speed    = EM28XX_I2C_CLK_WAIT_ENABLE |
 				EM28XX_I2C_FREQ_400_KHZ,
 	},
 	[EM2884_BOARD_CINERGY_HTC_STICK] = {
@@ -983,8 +983,8 @@ struct em28xx_board em28xx_boards[] = {
 		.has_dvb      = 1,
 		.ir_codes     = RC_MAP_NEC_TERRATEC_CINERGY_XS,
 		.tuner_type   = TUNER_ABSENT,
-		.i2c_speed    = EM2874_I2C_SECONDARY_BUS_SELECT |
-				EM28XX_I2C_CLK_WAIT_ENABLE |
+		.def_i2c_bus  = 1,
+		.i2c_speed    = EM28XX_I2C_CLK_WAIT_ENABLE |
 				EM28XX_I2C_FREQ_400_KHZ,
 	},
 	[EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
@@ -1404,8 +1404,8 @@ struct em28xx_board em28xx_boards[] = {
 	},
 
 	[EM2874_BOARD_LEADERSHIP_ISDBT] = {
-		.i2c_speed      = EM2874_I2C_SECONDARY_BUS_SELECT |
-				  EM28XX_I2C_CLK_WAIT_ENABLE |
+		.def_i2c_bus	= 1,
+		.i2c_speed      = EM28XX_I2C_CLK_WAIT_ENABLE |
 				  EM28XX_I2C_FREQ_100_KHZ,
 		.xclk		= EM28XX_XCLK_FREQUENCY_10MHZ,
 		.name		= "EM2874 Leadership ISDBT",
@@ -1917,8 +1917,8 @@ struct em28xx_board em28xx_boards[] = {
 	 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */
 	[EM28174_BOARD_PCTV_290E] = {
 		.name          = "PCTV nanoStick T2 290e",
-		.i2c_speed      = EM2874_I2C_SECONDARY_BUS_SELECT |
-			EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ,
+		.def_i2c_bus   = 1,
+		.i2c_speed     = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ,
 		.tuner_type    = TUNER_ABSENT,
 		.tuner_gpio    = pctv_290e,
 		.has_dvb       = 1,
@@ -1927,8 +1927,8 @@ struct em28xx_board em28xx_boards[] = {
 	/* 2013:024f PCTV DVB-S2 Stick 460e
 	 * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */
 	[EM28174_BOARD_PCTV_460E] = {
-		.i2c_speed     = EM2874_I2C_SECONDARY_BUS_SELECT |
-			EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
+		.def_i2c_bus   = 1,
+		.i2c_speed     = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
 		.name          = "PCTV DVB-S2 Stick (460e)",
 		.tuner_type    = TUNER_ABSENT,
 		.tuner_gpio    = pctv_460e,
@@ -1958,8 +1958,8 @@ struct em28xx_board em28xx_boards[] = {
 		.tuner_type    = TUNER_ABSENT,
 		.tuner_gpio    = maxmedia_ub425_tc,
 		.has_dvb       = 1,
-		.i2c_speed     = EM2874_I2C_SECONDARY_BUS_SELECT |
-				EM28XX_I2C_CLK_WAIT_ENABLE |
+		.def_i2c_bus   = 1,
+		.i2c_speed     = EM28XX_I2C_CLK_WAIT_ENABLE |
 				EM28XX_I2C_FREQ_400_KHZ,
 	},
 	/* 2304:0242 PCTV QuatroStick (510e)
@@ -1970,8 +1970,8 @@ struct em28xx_board em28xx_boards[] = {
 		.tuner_gpio    = pctv_510e,
 		.has_dvb       = 1,
 		.ir_codes      = RC_MAP_PINNACLE_PCTV_HD,
-		.i2c_speed     = EM2874_I2C_SECONDARY_BUS_SELECT |
-				EM28XX_I2C_CLK_WAIT_ENABLE |
+		.def_i2c_bus   = 1,
+		.i2c_speed     = EM28XX_I2C_CLK_WAIT_ENABLE |
 				EM28XX_I2C_FREQ_400_KHZ,
 	},
 	/* 2013:0251 PCTV QuatroStick nano (520e)
@@ -1982,8 +1982,8 @@ struct em28xx_board em28xx_boards[] = {
 		.tuner_gpio    = pctv_520e,
 		.has_dvb       = 1,
 		.ir_codes      = RC_MAP_PINNACLE_PCTV_HD,
-		.i2c_speed     = EM2874_I2C_SECONDARY_BUS_SELECT |
-				EM28XX_I2C_CLK_WAIT_ENABLE |
+		.def_i2c_bus   = 1,
+		.i2c_speed     = EM28XX_I2C_CLK_WAIT_ENABLE |
 				EM28XX_I2C_FREQ_400_KHZ,
 	},
 	[EM2884_BOARD_TERRATEC_HTC_USB_XS] = {
@@ -1991,8 +1991,8 @@ struct em28xx_board em28xx_boards[] = {
 		.has_dvb      = 1,
 		.ir_codes     = RC_MAP_NEC_TERRATEC_CINERGY_XS,
 		.tuner_type   = TUNER_ABSENT,
-		.i2c_speed    = EM2874_I2C_SECONDARY_BUS_SELECT |
-				EM28XX_I2C_CLK_WAIT_ENABLE |
+		.def_i2c_bus  = 1,
+		.i2c_speed    = EM28XX_I2C_CLK_WAIT_ENABLE |
 				EM28XX_I2C_FREQ_400_KHZ,
 	},
 };
@@ -2234,6 +2234,9 @@ static inline void em28xx_set_model(struct em28xx *dev)
 	if (!dev->board.i2c_speed)
 		dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
 				       EM28XX_I2C_FREQ_100_KHZ;
+
+	if (dev->board.def_i2c_bus == 1)
+		dev->board.i2c_speed |= EM2874_I2C_SECONDARY_BUS_SELECT;
 }
 
 

drivers/media/usb/em28xx/em28xx.h

@@ -375,6 +375,7 @@ struct em28xx_board {
 	int vchannels;
 	int tuner_type;
 	int tuner_addr;
+	int def_i2c_bus;	/* Default I2C bus */
 
 	/* i2c flags */
 	unsigned int tda9887_conf;