vxge/s2io: remove __dev* attributes

CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/net/ethernet/neterion/s2io.c

@@ -494,7 +494,7 @@ static struct pci_driver s2io_driver = {
 	.name = "S2IO",
 	.id_table = s2io_tbl,
 	.probe = s2io_init_nic,
-	.remove = __devexit_p(s2io_rem_nic),
+	.remove = s2io_rem_nic,
 	.err_handler = &s2io_err_handler,
 };
 
@@ -7702,7 +7702,7 @@ static const struct net_device_ops s2io_netdev_ops = {
  *  returns 0 on success and negative on failure.
  */
 
-static int __devinit
+static int
 s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 {
 	struct s2io_nic *sp;
@@ -8200,7 +8200,7 @@ mem_alloc_failed:
  * from memory.
  */
 
-static void __devexit s2io_rem_nic(struct pci_dev *pdev)
+static void s2io_rem_nic(struct pci_dev *pdev)
 {
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct s2io_nic *sp;

drivers/net/ethernet/neterion/s2io.h

@@ -1075,9 +1075,9 @@ static inline void SPECIAL_REG_WRITE(u64 val, void __iomem *addr, int order)
 /*
  * Prototype declaration.
  */
-static int __devinit s2io_init_nic(struct pci_dev *pdev,
+static int s2io_init_nic(struct pci_dev *pdev,
 				   const struct pci_device_id *pre);
-static void __devexit s2io_rem_nic(struct pci_dev *pdev);
+static void s2io_rem_nic(struct pci_dev *pdev);
 static int init_shared_mem(struct s2io_nic *sp);
 static void free_shared_mem(struct s2io_nic *sp);
 static int init_nic(struct s2io_nic *nic);

drivers/net/ethernet/neterion/vxge/vxge-config.c

@@ -993,7 +993,7 @@ exit:
  * for the driver, FW version information, and the first mac address for
  * each vpath
  */
-enum vxge_hw_status __devinit
+enum vxge_hw_status
 vxge_hw_device_hw_info_get(void __iomem *bar0,
 			   struct vxge_hw_device_hw_info *hw_info)
 {
@@ -1310,7 +1310,7 @@ __vxge_hw_device_config_check(struct vxge_hw_device_config *new_config)
  * When done, the driver allocates sizeof(struct __vxge_hw_device) bytes for HW
  * to enable the latter to perform Titan hardware initialization.
  */
-enum vxge_hw_status __devinit
+enum vxge_hw_status
 vxge_hw_device_initialize(
 	struct __vxge_hw_device **devh,
 	struct vxge_hw_device_attr *attr,
@@ -2917,7 +2917,7 @@ exit:
  * vxge_hw_device_config_default_get - Initialize device config with defaults.
  * Initialize Titan device config with default values.
  */
-enum vxge_hw_status __devinit
+enum vxge_hw_status
 vxge_hw_device_config_default_get(struct vxge_hw_device_config *device_config)
 {
 	u32 i;

drivers/net/ethernet/neterion/vxge/vxge-config.h

@@ -1846,11 +1846,11 @@ struct vxge_hw_vpath_attr {
 	struct vxge_hw_fifo_attr	fifo_attr;
 };
 
-enum vxge_hw_status __devinit vxge_hw_device_hw_info_get(
+enum vxge_hw_status vxge_hw_device_hw_info_get(
 	void __iomem *bar0,
 	struct vxge_hw_device_hw_info *hw_info);
 
-enum vxge_hw_status __devinit vxge_hw_device_config_default_get(
+enum vxge_hw_status vxge_hw_device_config_default_get(
 	struct vxge_hw_device_config *device_config);
 
 /**
@@ -1877,7 +1877,7 @@ u16 vxge_hw_device_link_width_get(struct __vxge_hw_device *devh);
 const u8 *
 vxge_hw_device_product_name_get(struct __vxge_hw_device *devh);
 
-enum vxge_hw_status __devinit vxge_hw_device_initialize(
+enum vxge_hw_status vxge_hw_device_initialize(
 	struct __vxge_hw_device **devh,
 	struct vxge_hw_device_attr *attr,
 	struct vxge_hw_device_config *device_config);

drivers/net/ethernet/neterion/vxge/vxge-main.c

@@ -3371,7 +3371,7 @@ static const struct net_device_ops vxge_netdev_ops = {
 #endif
 };
 
-static int __devinit vxge_device_register(struct __vxge_hw_device *hldev,
+static int vxge_device_register(struct __vxge_hw_device *hldev,
 					  struct vxge_config *config,
 					  int high_dma, int no_of_vpath,
 					  struct vxgedev **vdev_out)
@@ -3672,7 +3672,7 @@ static void verify_bandwidth(void)
 /*
  * Vpath configuration
  */
-static int __devinit vxge_config_vpaths(
+static int vxge_config_vpaths(
 			struct vxge_hw_device_config *device_config,
 			u64 vpath_mask, struct vxge_config *config_param)
 {
@@ -3859,7 +3859,7 @@ static int __devinit vxge_config_vpaths(
 }
 
 /* initialize device configuratrions */
-static void __devinit vxge_device_config_init(
+static void vxge_device_config_init(
 				struct vxge_hw_device_config *device_config,
 				int *intr_type)
 {
@@ -3912,7 +3912,7 @@ static void __devinit vxge_device_config_init(
 			device_config->rth_it_type);
 }
 
-static void __devinit vxge_print_parm(struct vxgedev *vdev, u64 vpath_mask)
+static void vxge_print_parm(struct vxgedev *vdev, u64 vpath_mask)
 {
 	int i;
 
@@ -4269,7 +4269,7 @@ static int vxge_probe_fw_update(struct vxgedev *vdev)
 	return ret;
 }
 
-static int __devinit is_sriov_initialized(struct pci_dev *pdev)
+static int is_sriov_initialized(struct pci_dev *pdev)
 {
 	int pos;
 	u16 ctrl;
@@ -4300,7 +4300,7 @@ static const struct vxge_hw_uld_cbs vxge_callbacks = {
  * returns 0 on success and negative on failure.
  *
  */
-static int __devinit
+static int
 vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
 {
 	struct __vxge_hw_device *hldev;
@@ -4764,7 +4764,7 @@ _exit0:
  * Description: This function is called by the Pci subsystem to release a
  * PCI device and free up all resource held up by the device.
  */
-static void __devexit vxge_remove(struct pci_dev *pdev)
+static void vxge_remove(struct pci_dev *pdev)
 {
 	struct __vxge_hw_device *hldev;
 	struct vxgedev *vdev;
@@ -4809,7 +4809,7 @@ static struct pci_driver vxge_driver = {
 	.name = VXGE_DRIVER_NAME,
 	.id_table = vxge_id_table,
 	.probe = vxge_probe,
-	.remove = __devexit_p(vxge_remove),
+	.remove = vxge_remove,
 #ifdef CONFIG_PM
 	.suspend = vxge_pm_suspend,
 	.resume = vxge_pm_resume,